// SPDX-License-Identifier: MIT

pragma solidity 0.8.18;

import "@openzeppelin/contracts-upgradeable/token/ERC721/IERC721Upgradeable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC1155/IERC1155Upgradeable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC20/utils/SafeERC20Upgradeable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC721/utils/ERC721HolderUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC1155/utils/ERC1155HolderUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";
import "@openzeppelin/contracts-upgradeable/security/ReentrancyGuardUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol";

import "../interfaces/IAssetVault.sol";
import "../interfaces/ICallDelegator.sol";
import "../external/interfaces/IPunks.sol";
import "../external/interfaces/ISuperRareV1.sol";

import "./CallWhitelistDelegation.sol";
import "./CallWhitelistApprovals.sol";
import "./OwnableERC721.sol";

import {
    AV_WithdrawsDisabled,
    AV_WithdrawsEnabled,
    AV_AlreadyInitialized,
    AV_MissingAuthorization,
    AV_NonWhitelistedCall,
    AV_NonWhitelistedApproval,
    AV_TooManyItems,
    AV_LengthMismatch,
    AV_ZeroAddress,
    AV_NonWhitelistedDelegation
} from "../errors/Vault.sol";

/**
 * @title AssetVault
 * @author Non-Fungible Technologies, Inc.
 *
 * The Asset Vault is a vault for the storage of collateralized assets.
 * Designed for one-time use, like a piggy bank. Once withdrawals are enabled,
 * and the bank is broken, the vault can no longer be used or transferred.
 *
 * It starts in a deposit-only state. Funds cannot be withdrawn at this point. When
 * the owner calls "enableWithdraw()", the state is set to a withdrawEnabled state.
 * Withdraws cannot be disabled once enabled. This restriction protects integrations
 * and purchasers of AssetVaults from unexpected withdrawal and frontrunning attacks.
 * For example: someone buys an AV assuming it contains token X, but I withdraw token X
 * immediately before the sale concludes.
 *
 * @dev Asset Vaults support arbitrary external calls by either:
 *     - the current owner of the vault
 *     - someone who the current owner "delegates" through the ICallDelegator interface
 *
 * This is to enable airdrop claims by borrowers during loans and other forms of NFT utility.
 * In practice, LoanCore delegates to the borrower during the period of an open loan.
 * Arcade.xyz maintains an allowed and restricted list of calls to balance between utility and security.
 *
 * Implementation warning: AssetVault is an OwnableERC721, which means that ownership of this contract
 * is tracked by a separate ERC721 contract defined by calling `_setNFT()`. In the current implementation,
 * the deployer is the VaultFactory, an ERC721 contract whose token ownership corresponds to vault ownership.
 * If this contract is modified or extended, or the deployer of a given AssetVault is not an ERC721 contract,
 * ownership will not work as intended.
 */
contract AssetVault is
    IAssetVault,
    OwnableERC721,
    Initializable,
    ERC1155HolderUpgradeable,
    ERC721HolderUpgradeable,
    ReentrancyGuardUpgradeable
{
    using AddressUpgradeable for address;
    using AddressUpgradeable for address payable;
    using SafeERC20Upgradeable for IERC20Upgradeable;

    // ============================================ STATE ==============================================

    /// @notice True if withdrawals are allowed out of this vault.
    /// @dev Note once set to true, it cannot be reverted back to false.
    bool public override withdrawEnabled;

    /// @notice Whitelist contract to determine if a given external call is allowed.
    address public override whitelist;

    /// @notice The maximum number of items that can be withdrawn from a vault at once.
    uint256 public constant MAX_WITHDRAW_ITEMS = 25;

    // ========================================== CONSTRUCTOR ===========================================

    /**
     * @dev Initializes values so initialize cannot be called on template.
     */
    constructor() {
        withdrawEnabled = true;
        OwnableERC721._setNFT(msg.sender);
    }

    // ========================================== INITIALIZER ===========================================

    /**
     * @notice Initializes the contract, used on clone deployments. In practice,
     *         always called by the VaultFactory contract.
     *
     * @param _whitelist            The contract maintaining the whitelist of allowed
     *                              arbitrary calls.
     */
    function initialize(address _whitelist) external override initializer {
        if (withdrawEnabled || ownershipToken != address(0)) revert AV_AlreadyInitialized(ownershipToken);
        // set ownership to inherit from the factory who deployed us
        // The factory should have a tokenId == uint256(address(this))
        // whose owner has ownership control over this contract
        OwnableERC721._setNFT(msg.sender);
        whitelist = _whitelist;

        __ReentrancyGuard_init();
    }

    // ========================================= VIEW FUNCTIONS =========================================

    /**
     * @inheritdoc OwnableERC721
     */
    function owner() public view override returns (address ownerAddress) {
        return OwnableERC721.owner();
    }

    // ===================================== WITHDRAWAL OPERATIONS ======================================

    /**
     * @notice Enables withdrawals on the vault. Irreversible. Caller must be the
     *         owner of the underlying ownership NFT.
     *
     * @dev Any integration should be aware that a withdraw-enabled vault cannot
     *      be transferred (will revert).
     *
     */
    function enableWithdraw() external override onlyOwner onlyWithdrawDisabled {
        withdrawEnabled = true;
        emit WithdrawEnabled(msg.sender);
    }

    /**
     * @notice Withdraw entire balance of a given ERC20 token from the vault.
     *         The vault must be in a "withdrawEnabled" state (non-transferrable),
     *         and the caller must be the owner.
     *
     * @param token                 The ERC20 token to withdraw.
     * @param to                    The recipient of the withdrawn funds.
     */
    function withdrawERC20(address token, address to) external override onlyOwner onlyWithdrawEnabled {
        if (to == address(0)) revert AV_ZeroAddress("to");

        uint256 balance = IERC20(token).balanceOf(address(this));
        IERC20Upgradeable(token).safeTransfer(to, balance);
        emit WithdrawERC20(msg.sender, token, to, balance);
    }

    /**
     * @notice Withdraw a specific ERC721 token from the vault. The vault must
     *         be in a "withdrawEnabled" state (non-transferrable), and the caller
     *         must be the owner. The specified token must exist and be owned by
     *         this contract.
     *
     * @param token                 The token to withdraw.
     * @param tokenId               The ID of the NFT to withdraw.
     * @param to                    The recipient of the withdrawn token.
     */
    function withdrawERC721(
        address token,
        uint256 tokenId,
        address to
    ) external override onlyOwner onlyWithdrawEnabled {
        _withdrawERC721(token, tokenId, to);
    }

    /**
     * @notice Withdraw entire balance of a given ERC1155 token from the vault.
     *         The vault must be in a "withdrawEnabled" state (non-transferrable),
     *         and the caller must be the owner.
     *
     * @param token                 The ERC1155 token to withdraw.
     * @param tokenId               The ID of the token to withdraw.
     * @param to                    The recipient of the withdrawn funds.
     */
    function withdrawERC1155(
        address token,
        uint256 tokenId,
        address to
    ) external override onlyOwner onlyWithdrawEnabled {
        _withdrawERC1155(token, tokenId, to);
    }

    /**
     * @notice Batch withdraw assets from the vault. The vault must be in a
     *         "withdrawEnabled" state (non-transferrable), and the caller must
     *         be the owner.
     *
     * @dev This function is used to withdraw multiple ERC721 and ERC1155 tokens
     *      from the vault. The caller must specify the token type (ERC721 or
     *      ERC1155) and the token ID for each token to withdraw. The caller
     *      must also specify the recipient of the withdrawal. Refer to the
     *      MAX_WITHDRAW_ITEMS state constant for the maximum number of vault
     *      items that can be withdrawn per function call.
     *
     * @param tokens                An array of tokens address to withdraw.
     * @param tokenIds              An array of tokenIds to withdraw.
     * @param tokenTypes            An arrary of token types to withdraw.
     * @param to                    The recipient of the withdrawn tokens.
     */
    // solhint-disable-next-line code-complexity
    function withdrawBatch(
        address[] calldata tokens,
        uint256[] calldata tokenIds,
        TokenType[] calldata tokenTypes,
        address to
    ) external override onlyOwner onlyWithdrawEnabled {
        uint256 tokensLength = tokens.length;
        if (tokensLength > MAX_WITHDRAW_ITEMS) revert AV_TooManyItems(tokensLength);
        if (tokensLength != tokenIds.length) revert AV_LengthMismatch("tokenId");
        if (tokensLength != tokenTypes.length) revert AV_LengthMismatch("tokenType");

        for (uint256 i = 0; i < tokensLength;) {
            if (tokens[i] == address(0)) revert AV_ZeroAddress("token");

            if (tokenTypes[i] == TokenType.ERC721) {
                _withdrawERC721(tokens[i], tokenIds[i], to);
            } else {
                _withdrawERC1155(tokens[i], tokenIds[i], to);
            }

            // Can never overflow because length is bounded by MAX_WITHDRAW_ITEMS
            unchecked {
                i++;
            }
        }
    }

    /**
     * @notice Withdraw entire balance of ETH from the vault.
     *         The vault must be in a "withdrawEnabled" state (non-transferrable),
     *         and the caller must be the owner.
     *
     * @param to                    The recipient of the withdrawn funds.
     */
    function withdrawETH(address to) external override onlyOwner onlyWithdrawEnabled nonReentrant {
        if (to == address(0)) revert AV_ZeroAddress("to");

        // perform transfer
        uint256 balance = address(this).balance;
        // sendValue() internally uses call() which passes along all of
        // the remaining gas, potentially introducing an attack vector
        payable(to).sendValue(balance);
        emit WithdrawETH(msg.sender, to, balance);
    }

    /**
     * @notice Withdraw cryptoPunk from the vault.
     *         The vault must be in a "withdrawEnabled" state (non-transferrable),
     *         and the caller must be the owner.
     *
     * @param punks                 The CryptoPunk contract address.
     * @param punkIndex             The index of the CryptoPunk to withdraw (i.e. token ID).
     * @param to                    The recipient of the withdrawn punk.
     */
    function withdrawPunk(
        address punks,
        uint256 punkIndex,
        address to
    ) external override onlyOwner onlyWithdrawEnabled {
        if (to == address(0)) revert AV_ZeroAddress("to");

        IPunks(punks).transferPunk(to, punkIndex);
        emit WithdrawPunk(msg.sender, punks, to, punkIndex);
    }

    /**
     * @notice Withdraw SuperRare V1 from the vault.
     *         Vault must have withdraw enabled.
     *         Caller must be owner.
     *
     * @param superRareV1           SuperRare V1 contract address
     * @param tokenId               tokenId to withdraw
     * @param to                    recipient of the token
     */
    function withdrawSuperRareV1(
        address superRareV1,
        uint256 tokenId,
        address to
    ) external override onlyOwner onlyWithdrawEnabled {
        if (to == address(0)) revert AV_ZeroAddress("to");

        ISuperRareV1(superRareV1).transfer(to, tokenId);
        emit WithdrawSuperRareV1(msg.sender, superRareV1, to, tokenId);
    }

    // ====================================== UTILITY OPERATIONS ========================================

    /**
     * @notice Call a function on an external contract. Intended for claiming airdrops
     *         and other forms of NFT utility. All allowed calls are whitelist by the
     *         "whitelist" contract. The vault must have withdrawals disabled, and the caller
     *         must either be the owner, or the owner must have explicitly
     *         delegated this ability to the caller through ICallDelegator interface.
     *
     * @param to                    The contract address to call.
     * @param data                  The data to call the contract with.
     */
    function call(
        address to,
        bytes calldata data
    ) external override onlyAllowedCallers onlyWithdrawDisabled nonReentrant {
        if (!ICallWhitelist(whitelist).isWhitelisted(to, bytes4(data[:4]))) {
            revert AV_NonWhitelistedCall(to, bytes4(data[:4]));
        }

        to.functionCall(data);

        emit Call(msg.sender, to, data);
    }

    /**
     * @notice Approve a token for spending by an external contract. Note that any token
     *         approved in the whitelist does not make good collateral, because the allowed
     *         spender may be able to withdraw it from the vault.
     *
     * @param token                 The token to approve.
     * @param spender               The approved spender.
     * @param amount                The amount to approve.
     */
    function callApprove(
        address token,
        address spender,
        uint256 amount
    ) external override onlyAllowedCallers onlyWithdrawDisabled nonReentrant {
        if (!CallWhitelistApprovals(whitelist).isApproved(token, spender)) {
            revert AV_NonWhitelistedApproval(token, spender);
        }

        // Do approval
        IERC20Upgradeable(token).safeApprove(spender, amount);

        emit Approve(msg.sender, token, spender, amount);
    }

    /**
     * @notice Increase token allowance for spending by an external contract. Note that any
     *         token approved in the whitelist does not make good collateral, because the
     *         allowed spender may be able to withdraw it from the vault.
     *
     * @param token                 The token to approve.
     * @param spender               The approved spender.
     * @param amount                The amount to increase allowance by.
     */
    function callIncreaseAllowance(
        address token,
        address spender,
        uint256 amount
    ) external override onlyAllowedCallers onlyWithdrawDisabled nonReentrant {
        if (!CallWhitelistApprovals(whitelist).isApproved(token, spender)) {
            revert AV_NonWhitelistedApproval(token, spender);
        }

        // increase spender allowance
        IERC20Upgradeable(token).safeIncreaseAllowance(spender, amount);

        emit IncreaseAllowance(msg.sender, token, spender, amount);
    }

    /**
     * @notice Decrease token allowance for spending by an external contract. Note that any
     *         token approved in the whitelist does not make good collateral, because the
     *         allowed spender may be able to withdraw it from the vault.
     *
     * @param token                 The token to approve.
     * @param spender               The approved spender.
     * @param amount                The amount to decrease allowance by.
     */
    function callDecreaseAllowance(
        address token,
        address spender,
        uint256 amount
    ) external override onlyAllowedCallers onlyWithdrawDisabled nonReentrant {
        if (!CallWhitelistApprovals(whitelist).isApproved(token, spender)) {
            revert AV_NonWhitelistedApproval(token, spender);
        }

        // decrease spender allowance
        IERC20Upgradeable(token).safeDecreaseAllowance(spender, amount);

        emit DecreaseAllowance(msg.sender, token, spender, amount);
    }

    /**
     * @notice Delegate a token held by the vault to an external contract. This token must
     *         be whitelisted for delegation by the CallWhitelistDelegation contract. This
     *         will grant delegation powers for all tokens within this contract held by the vault.
     *
     * @param token                 The token to delegate.
     * @param target                The address to delegate to (the hot wallet).
     * @param enable                Whether to enable or disable delegation.
     */
    function callDelegateForContract(
        address token,
        address target,
        bool enable
    ) external override onlyAllowedCallers onlyWithdrawDisabled nonReentrant {
        if (!CallWhitelistDelegation(whitelist).isDelegationApproved(token)) {
            revert AV_NonWhitelistedDelegation(token);
        }

        // Do delegation
        CallWhitelistDelegation(whitelist).registry().delegateForContract(target, token, enable);

        emit DelegateContract(msg.sender, token, target, enable);
    }

    /**
     * @notice Delegate a specific tokenId held by the vault to an external contract. This token must
     *         be whitelisted for delegation by the CallWhitelistDelegation contract. This
     *         will grant delegation powers for only the specified tokenId within the token.
     *
     * @param token                 The token to delegate.
     * @param target                The address to delegate to (the hot wallet).
     * @param tokenId               The token ID to delegate.
     * @param enable                Whether to enable or disable delegation.
     */
    function callDelegateForToken(
        address token,
        address target,
        uint256 tokenId,
        bool enable
    ) external override onlyAllowedCallers onlyWithdrawDisabled nonReentrant {
        if (!CallWhitelistDelegation(whitelist).isDelegationApproved(token)) {
            revert AV_NonWhitelistedDelegation(token);
        }

        // Do delegation
        CallWhitelistDelegation(whitelist).registry().delegateForToken(target, token, tokenId, enable);

        emit DelegateToken(msg.sender, token, target, tokenId, enable);
    }

    /**
     * @notice Revoke all delegations the vault has granted to an external contract. For individual
     *         revocations per-contract and perToken, use callDelegateForContract and callDelegateForToken
     *         with enabled set to false.
     */
     function callRevokeAllDelegates() external override onlyAllowedCallers onlyWithdrawDisabled nonReentrant {
        CallWhitelistDelegation(whitelist).registry().revokeAllDelegates();

        emit DelegateRevoke(msg.sender);
     }

    // ============================================ HELPERS =============================================

    /**
     * @dev Private function to withdraw a ERC721 token from the vault.
     *
     * @param token                 The token to withdraw.
     * @param tokenId               The ID of the NFT to withdraw.
     * @param to                    The recipient of the withdrawn token.
     */
    function _withdrawERC721(
        address token,
        uint256 tokenId,
        address to
    ) private {
        if (to == address(0)) revert AV_ZeroAddress("to");

        IERC721Upgradeable(token).safeTransferFrom(address(this), to, tokenId);

        emit WithdrawERC721(msg.sender, token, to, tokenId);
    }

    /**
     * @dev Private function to withdraw ERC1155 tokens from the vault.
     *
     * @param token                 The token to withdraw.
     * @param tokenId               The ID of the token to withdraw.
     * @param to                    The recipient of the withdrawn funds.
     */
    function _withdrawERC1155(
        address token,
        uint256 tokenId,
        address to
    ) private {
        if (to == address(0)) revert AV_ZeroAddress("to");

        uint256 balance = IERC1155(token).balanceOf(address(this), tokenId);
        IERC1155Upgradeable(token).safeTransferFrom(address(this), to, tokenId, balance, "");

        emit WithdrawERC1155(msg.sender, token, to, tokenId, balance);
    }

    /**
     * @dev For any utility function, check whether the caller is the owner or has been
     *      approved via the ICallDelegator interface by the owner.
     */
    modifier onlyAllowedCallers() {
        if (msg.sender != owner() && !ICallDelegator(owner()).canCallOn(msg.sender, address(this))) {
            revert AV_MissingAuthorization(msg.sender);
        }

        _;
    }

    /**
     * @dev For methods only callable with withdraws enabled (all withdrawal operations).
     */
    modifier onlyWithdrawEnabled() {
        if (!withdrawEnabled) revert AV_WithdrawsDisabled();
        _;
    }

    /**
     * @dev For methods only callable with withdraws disabled (call operations and enabling withdraws).
     */
    modifier onlyWithdrawDisabled() {
        if (withdrawEnabled) revert AV_WithdrawsEnabled();
        _;
    }

    /**
     * @dev Fallback "receive Ether" function. Contract can hold Ether
     *      which can be accessed using withdrawETH.
     */
    receive() external payable {}
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165Upgradeable.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721Upgradeable is IERC165Upgradeable {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165Upgradeable.sol";

/**
 * @dev Required interface of an ERC1155 compliant contract, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1155[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155Upgradeable is IERC165Upgradeable {
    /**
     * @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
     */
    event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);

    /**
     * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
     * transfers.
     */
    event TransferBatch(
        address indexed operator,
        address indexed from,
        address indexed to,
        uint256[] ids,
        uint256[] values
    );

    /**
     * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
     * `approved`.
     */
    event ApprovalForAll(address indexed account, address indexed operator, bool approved);

    /**
     * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
     *
     * If an {URI} event was emitted for `id`, the standard
     * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
     * returned by {IERC1155MetadataURI-uri}.
     */
    event URI(string value, uint256 indexed id);

    /**
     * @dev Returns the amount of tokens of token type `id` owned by `account`.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) external view returns (uint256);

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
        external
        view
        returns (uint256[] memory);

    /**
     * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
     *
     * Emits an {ApprovalForAll} event.
     *
     * Requirements:
     *
     * - `operator` cannot be the caller.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address account, address operator) external view returns (bool);

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes calldata data
    ) external;

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] calldata ids,
        uint256[] calldata amounts,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../IERC20Upgradeable.sol";
import "../../../utils/AddressUpgradeable.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20Upgradeable {
    using AddressUpgradeable for address;

    function safeTransfer(
        IERC20Upgradeable token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20Upgradeable token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20Upgradeable token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20Upgradeable token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20Upgradeable token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20Upgradeable token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../IERC721ReceiverUpgradeable.sol";
import "../../../proxy/utils/Initializable.sol";

/**
 * @dev Implementation of the {IERC721Receiver} interface.
 *
 * Accepts all token transfers.
 * Make sure the contract is able to use its token with {IERC721-safeTransferFrom}, {IERC721-approve} or {IERC721-setApprovalForAll}.
 */
contract ERC721HolderUpgradeable is Initializable, IERC721ReceiverUpgradeable {
    function __ERC721Holder_init() internal initializer {
        __ERC721Holder_init_unchained();
    }

    function __ERC721Holder_init_unchained() internal initializer {
    }
    /**
     * @dev See {IERC721Receiver-onERC721Received}.
     *
     * Always returns `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address,
        address,
        uint256,
        bytes memory
    ) public virtual override returns (bytes4) {
        return this.onERC721Received.selector;
    }
    uint256[50] private __gap;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./ERC1155ReceiverUpgradeable.sol";
import "../../../proxy/utils/Initializable.sol";

/**
 * @dev _Available since v3.1._
 */
contract ERC1155HolderUpgradeable is Initializable, ERC1155ReceiverUpgradeable {
    function __ERC1155Holder_init() internal initializer {
        __ERC165_init_unchained();
        __ERC1155Receiver_init_unchained();
        __ERC1155Holder_init_unchained();
    }

    function __ERC1155Holder_init_unchained() internal initializer {
    }
    function onERC1155Received(
        address,
        address,
        uint256,
        uint256,
        bytes memory
    ) public virtual override returns (bytes4) {
        return this.onERC1155Received.selector;
    }

    function onERC1155BatchReceived(
        address,
        address,
        uint256[] memory,
        uint256[] memory,
        bytes memory
    ) public virtual override returns (bytes4) {
        return this.onERC1155BatchReceived.selector;
    }
    uint256[50] private __gap;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     */
    bool private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Modifier to protect an initializer function from being invoked twice.
     */
    modifier initializer() {
        require(_initializing || !_initialized, "Initializable: contract is already initialized");

        bool isTopLevelCall = !_initializing;
        if (isTopLevelCall) {
            _initializing = true;
            _initialized = true;
        }

        _;

        if (isTopLevelCall) {
            _initializing = false;
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuardUpgradeable is Initializable {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    function __ReentrancyGuard_init() internal initializer {
        __ReentrancyGuard_init_unchained();
    }

    function __ReentrancyGuard_init_unchained() internal initializer {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
    uint256[49] private __gap;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.18;

interface IAssetVault {
    // ============= Enums ==============

    enum TokenType { ERC721, ERC1155 }

    // ============= Events ==============

    event WithdrawEnabled(address operator);
    event WithdrawERC20(address indexed operator, address indexed token, address recipient, uint256 amount);
    event WithdrawERC721(address indexed operator, address indexed token, address recipient, uint256 tokenId);
    event WithdrawPunk(address indexed operator, address indexed token, address recipient, uint256 tokenId);
    event WithdrawSuperRareV1(address indexed operator, address indexed token, address recipient, uint256 tokenId);

    event WithdrawERC1155(
        address indexed operator,
        address indexed token,
        address recipient,
        uint256 tokenId,
        uint256 amount
    );

    event WithdrawETH(address indexed operator, address indexed recipient, uint256 amount);
    event Call(address indexed operator, address indexed to, bytes data);
    event Approve(address indexed operator, address indexed token, address indexed spender, uint256 amount);
    event IncreaseAllowance(address indexed operator, address indexed token, address indexed spender, uint256 amount);
    event DecreaseAllowance(address indexed operator, address indexed token, address indexed spender, uint256 amount);
    event DelegateContract(address indexed operator, address indexed token, address indexed target, bool enabled);
    event DelegateToken(address indexed operator, address indexed token, address indexed target, uint256 tokenId, bool enabled);
    event DelegateRevoke(address indexed operator);

    // ================= Initializer ==================

    function initialize(address _whitelist) external;

    // ================ View Functions ================

    function withdrawEnabled() external view returns (bool);

    function whitelist() external view returns (address);

    // ================ Withdrawal Operations ================

    function enableWithdraw() external;

    function withdrawERC20(address token, address to) external;

    function withdrawERC721(
        address token,
        uint256 tokenId,
        address to
    ) external;

    function withdrawERC1155(
        address token,
        uint256 tokenId,
        address to
    ) external;

    function withdrawBatch(
        address[] calldata tokens,
        uint256[] calldata tokenIds,
        TokenType[] calldata tokenTypes,
        address to
    ) external;

    function withdrawETH(address to) external;

    function withdrawPunk(
        address punks,
        uint256 punkIndex,
        address to
    ) external;

    function withdrawSuperRareV1(
        address superRareV1,
        uint256 tokenId,
        address to
    ) external;

    // ================ Utility Operations ================

    function call(address to, bytes memory data) external;

    function callApprove(address token, address spender, uint256 amount) external;

    function callIncreaseAllowance(address token, address spender, uint256 amount) external;

    function callDecreaseAllowance(address token, address spender, uint256 amount) external;

    function callDelegateForContract(address token, address target, bool enable) external;

    function callDelegateForToken(address token, address target, uint256 tokenId, bool enable) external;

    function callRevokeAllDelegates() external;
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.18;

interface ICallDelegator {
    // ============== View Functions ==============

    function canCallOn(address caller, address vault) external view returns (bool);
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.18;

interface IPunks {
    function balanceOf(address owner) external view returns (uint256);

    function punkIndexToAddress(uint256 punkIndex) external view returns (address owner);

    function buyPunk(uint256 punkIndex) external;

    function transferPunk(address to, uint256 punkIndex) external;
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.18;

interface ISuperRareV1 {
    function balanceOf(address _owner) external view returns (uint256 _balance);

    function ownerOf(uint256 _tokenId) external view returns (address _owner);

    function transfer(address _to, uint256 _tokenId) external;

    function approve(address _to, uint256 _tokenId) external;

    function takeOwnership(uint256 _tokenId) external;
}

// SPDX-License-Identifier: GPL-3.0-only

pragma solidity 0.8.18;

import "../external/interfaces/IDelegationRegistry.sol";

import "./CallWhitelist.sol";

import { CWD_RegistryAlreadySet, CWD_ZeroAddress } from "../errors/Vault.sol";

/**
 * @title CallWhitelistDelegation
 * @author Non-Fungible Technologies, Inc.
 *
 * Adds delegation functionality to CallWhitelist, allowing the
 * whitelist manager to decide which collections can be used with
 * the DelegateCash registry. Each token should be considered for
 * possible implications of delegation before adding to the whitelist.
 *
 * If a token is on the whitelist, delegateForContract and delegateForToken
 * will be enabled for that token.
 *
 * WARNING: adding these functions to the core CallWhitelist whitelist will bypass
 * the delegation functions that check the whitelist for which tokens can
 * be delegated. The whitelist manager should take care not to use both the core
 * whitelist for delegation as well as the delegation whitelist.
 */
contract CallWhitelistDelegation is CallWhitelist {
    event DelegationSet(address indexed caller, address indexed token, bool isApproved);
    event RegistryChanged(address indexed caller, address indexed registry);

    // ============================================ STATE ==============================================

    // ================= Whitelist State ==================

    /// @notice Tokens approved for delegation.
    /// @dev    token -> isApproved
    mapping(address => bool) private delegationApproved;

    /// @notice The delegation registry for the whitelist.
    IDelegationRegistry public registry;

    // ========================================== CONSTRUCTOR ===========================================

    /**
     * @dev Initializes values so initialize cannot be called on template.
     */
    constructor(address _registry) {
        if (_registry == address(0)) revert CWD_ZeroAddress();

        registry = IDelegationRegistry(_registry);
    }

    // ========================================= VIEW FUNCTIONS =========================================

    /**
     * @notice Returns true if the given spender is approved to spend the given token.
     *
     * @param token                     The token approval to check.
     *
     * @return isDelegationApproved     True if the token can be delegated, else false.
     */
    function isDelegationApproved(address token) public view returns (bool) {
        return delegationApproved[token];
    }

    // ======================================== UPDATE OPERATIONS =======================================

    /**
     * @notice Sets approval status of a given token for a spender. Note that this is
     *         NOT a token approval - it is permission to register a delegation from
     *         the vault.
     *
     * @param token                The token approval to set.
     * @param _isApproved          Whether the token should be approved.
     */
    function setDelegationApproval(address token, bool _isApproved) external onlyRole(WHITELIST_MANAGER_ROLE) {
        delegationApproved[token] = _isApproved;

        emit DelegationSet(msg.sender, token, _isApproved);
    }

    /**
     * @notice Sets the registry for the whitelist. Should only be used in case
     *         of delegate cash migration to new registry.
     *
     * @param _registry             The new registry.
     */
    function setRegistry(address _registry) external onlyRole(ADMIN_ROLE) {
        if (address(registry) == _registry) revert CWD_RegistryAlreadySet();

        registry = IDelegationRegistry(_registry);

        emit RegistryChanged(msg.sender, _registry);
    }
}

// SPDX-License-Identifier: GPL-3.0-only

pragma solidity 0.8.18;

import "./CallWhitelist.sol";

/**
 * @title CallWhitelistApprovals
 * @author Non-Fungible Technologies, Inc.
 *
 * Adds approvals functionality to CallWhitelist. Certain spenders
 * can be approved for tokens on vaults, with the requisite ability
 * to withdraw. Should not be used for tokens acting as collateral.
 *
 * The contract owner can add or remove approved token/spender pairs.
 */
contract CallWhitelistApprovals is CallWhitelist {
    event ApprovalSet(address indexed caller, address indexed token, address indexed spender, bool isApproved);

    // ============================================ STATE ==============================================

    // ================= Whitelist State ==================

    /// @notice Approved spenders of vault tokens.
    /// @dev    token -> spender -> isApproved
    mapping(address => mapping(address => bool)) private approvals;

    /**
     * @notice Returns true if the given spender is approved to spend the given token.
     *
     * @param token                The token approval to check.
     * @param spender              The token spender.
     *
     * @return isApproved          True if approved, else false.
     */
    function isApproved(address token, address spender) public view returns (bool) {
        return approvals[token][spender];
    }

    // ======================================== UPDATE OPERATIONS =======================================

    /**
     * @notice Sets approval status of a given token for a spender. Note that this is
     *         NOT a token approval - it is permission to create a token approval from
     *         the asset vault.
     *
     * @param token                The token approval to set.
     * @param spender              The token spender.
     * @param _isApproved          Whether the spender should be approved.
     */
    function setApproval(address token, address spender, bool _isApproved) external onlyRole(WHITELIST_MANAGER_ROLE) {
        approvals[token][spender] = _isApproved;
        emit ApprovalSet(msg.sender, token, spender, _isApproved);
    }
}

// SPDX-License-Identifier: GPL-3.0-only

pragma solidity 0.8.18;

import "@openzeppelin/contracts/token/ERC721/IERC721.sol";

import { OERC721_CallerNotOwner } from "../errors/Vault.sol";

/**
 * @title OwnableERC721
 * @author Non-Fungible Technologies, Inc.
 *
 * Uses ERC721 ownership for access control to a set of contracts.
 * Ownership of underlying contract determined by ownership of a token ID,
 * where the token ID converts to an on-chain address.
 */
abstract contract OwnableERC721 {
    event SetOwnershipToken(address indexed caller, address indexed ownershipToken);

    // ============================================ STATE ==============================================

    /// @dev The ERC721 token that contract owners should have ownership of.
    address public ownershipToken;

    // ========================================= VIEW FUNCTIONS =========================================

    /**
     * @notice Specifies the owner of the underlying token ID, derived
     *         from the contract address of the contract implementing.
     *
     * @return ownerAddress         The owner of the underlying token derived from
     *                              the calling address.
     */
    function owner() public view virtual returns (address ownerAddress) {
        return IERC721(ownershipToken).ownerOf(uint256(uint160(address(this))));
    }

    // ============================================ HELPERS =============================================

    /**
     * @dev Set the ownership token - the ERC721 that specified who controls
     *      defined addresses.
     *
     * @param _ownershipToken       The address of the ERC721 token that defines ownership.
     */
    function _setNFT(address _ownershipToken) internal {
        ownershipToken = _ownershipToken;

        emit SetOwnershipToken(msg.sender, _ownershipToken);
    }

    /**
     * @dev Similar to Ownable - checks the method is being called by the owner,
     *      where the owner is defined by the token ID in the ownership token which
     *      maps to the calling contract address.
     */
    modifier onlyOwner() {
        if (owner() != msg.sender) revert OERC721_CallerNotOwner(msg.sender);
        _;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.18;

/**
 * @title VaultErrors
 * @author Non-Fungible Technologies, Inc.
 *
 * This file contains all custom errors for vault contracts used by the protocol.
 * All errors prefixed by the contract that throws them (e.g., "AV_" for Asset Vault).
 * Errors located in one place to make it possible to holistically look at all
 * asset vault failure cases.
 */

// ==================================== Asset Vault ======================================
/// @notice All errors prefixed with AV_, to separate from other contracts in the protocol.

/**
 * @notice Vault withdraws must be enabled.
 */
error AV_WithdrawsDisabled();

/**
 * @notice Vault withdraws enabled.
 */
error AV_WithdrawsEnabled();

/**
 * @notice Asset vault already initialized.
 *
 * @param ownershipToken                    Caller of initialize function in asset vault contract.
 */
error AV_AlreadyInitialized(address ownershipToken);

/**
 * @notice CanCallOn authorization returned false.
 *
 * @param caller                             Msg.sender of the function call.
 */
error AV_MissingAuthorization(address caller);

/**
 * @notice Call disallowed.
 *
 * @param to                                The contract address to call.
 * @param data                              The data to call the contract with.
 */
error AV_NonWhitelistedCall(address to, bytes4 data);

/**
 * @notice Approval disallowed.
 *
 * @param token                             The token to approve.
 * @param spender                           The spender to approve.
 */
error AV_NonWhitelistedApproval(address token, address spender);

/**
 * @notice Cannot withdraw more than 25 items from a vault at a time.
 *
 * @param arrayLength                  Total elements provided.
 */
error AV_TooManyItems(uint256 arrayLength);

/**
 * @notice The length of either the tokenIds or tokenTypes array does not match
 *         the length of the tokenAddress array.
 *
 * @param arrayType                    Array type that does not match tokenAddress array length.
 */
error AV_LengthMismatch(string arrayType);

/**
 * @notice Zero address passed in where not allowed.
 *
 * @param addressType                  The name of the parameter for which a zero address was provided.
 */
error AV_ZeroAddress(string addressType);

/**
 * @notice Delegation disallowed.
 *
 * @param token                             The token to delegate.
 */
error AV_NonWhitelistedDelegation(address token);

// ==================================== Ownable ERC721 ======================================
/// @notice All errors prefixed with OERC721_, to separate from other contracts in the protocol.

/**
 * @notice Function caller is not the owner.
 *
 * @param caller                             Msg.sender of the function call.
 */
error OERC721_CallerNotOwner(address caller);

// ==================================== Vault Factory ======================================
/// @notice All errors prefixed with VF_, to separate from other contracts in the protocol.

/**
 * @notice Zero address passed in where not allowed.
 *
 * @param addressType                  The name of the parameter for which a zero address was provided.
 */
error VF_ZeroAddress(string addressType);

/**
 * @notice Global index out of bounds.
 *
 * @param tokenId                            AW-V2 tokenId of the asset vault.
 */
error VF_TokenIdOutOfBounds(uint256 tokenId);

/**
 * @notice Cannot transfer with withdraw enabled.
 *
 * @param tokenId                            AW-V2 tokenId of the asset vault.
 */
error VF_NoTransferWithdrawEnabled(uint256 tokenId);

/**
 * @notice Not enough msg.value sent for the required mint fee.
 *
 * @param value                              The msg.value.
 * @param requiredMintFee                    The required mint fee.
 */
error VF_InsufficientMintFee(uint256 value, uint256 requiredMintFee);

/**
 * @notice Non-existant token id provided as argument.
 *
 * @param tokenId                       The ID of the token to lookup the URI for.
 */
error VF_DoesNotExist(uint256 tokenId);

// ================================== Call Whitelist ======================================
/// @notice All errors prefixed with CW_, to separate from other contracts in the protocol.

/**
 * @notice Cannot whitelist a call which has already been whitelisted.
 *
 * @param callee                             The contract to be added to CallWhitelist mapping.
 * @param selector                           The function selector to be added to CallWhitelist mapping.
 */
error CW_AlreadyWhitelisted(address callee, bytes4 selector);

/**
 * @notice Cannot remove a call from the CallWhitelist that has not yet been added.
 *
 * @param callee                             The contract to be removed from CallWhitelist mapping.
 * @param selector                           The function selector to be removed from CallWhitelist mapping.
 */
error CW_NotWhitelisted(address callee, bytes4 selector);

// ================================== Call Whitelist Delegation ======================================

/**
 * @notice Zero address passed in the constructor.
 */
error CWD_ZeroAddress();

/**
 * @notice The registry address provided is currently set as the registry.
 */
error CWD_RegistryAlreadySet();

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165Upgradeable {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20Upgradeable {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721ReceiverUpgradeable {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../IERC1155ReceiverUpgradeable.sol";
import "../../../utils/introspection/ERC165Upgradeable.sol";
import "../../../proxy/utils/Initializable.sol";

/**
 * @dev _Available since v3.1._
 */
abstract contract ERC1155ReceiverUpgradeable is Initializable, ERC165Upgradeable, IERC1155ReceiverUpgradeable {
    function __ERC1155Receiver_init() internal initializer {
        __ERC165_init_unchained();
        __ERC1155Receiver_init_unchained();
    }

    function __ERC1155Receiver_init_unchained() internal initializer {
    }
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165Upgradeable, IERC165Upgradeable) returns (bool) {
        return interfaceId == type(IERC1155ReceiverUpgradeable).interfaceId || super.supportsInterface(interfaceId);
    }
    uint256[50] private __gap;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165Upgradeable.sol";

/**
 * @dev _Available since v3.1._
 */
interface IERC1155ReceiverUpgradeable is IERC165Upgradeable {
    /**
        @dev Handles the receipt of a single ERC1155 token type. This function is
        called at the end of a `safeTransferFrom` after the balance has been updated.
        To accept the transfer, this must return
        `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
        (i.e. 0xf23a6e61, or its own function selector).
        @param operator The address which initiated the transfer (i.e. msg.sender)
        @param from The address which previously owned the token
        @param id The ID of the token being transferred
        @param value The amount of tokens being transferred
        @param data Additional data with no specified format
        @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
    */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);

    /**
        @dev Handles the receipt of a multiple ERC1155 token types. This function
        is called at the end of a `safeBatchTransferFrom` after the balances have
        been updated. To accept the transfer(s), this must return
        `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
        (i.e. 0xbc197c81, or its own function selector).
        @param operator The address which initiated the batch transfer (i.e. msg.sender)
        @param from The address which previously owned the token
        @param ids An array containing ids of each token being transferred (order and length must match values array)
        @param values An array containing amounts of each token being transferred (order and length must match ids array)
        @param data Additional data with no specified format
        @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
    */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IERC165Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165Upgradeable is Initializable, IERC165Upgradeable {
    function __ERC165_init() internal initializer {
        __ERC165_init_unchained();
    }

    function __ERC165_init_unchained() internal initializer {
    }
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165Upgradeable).interfaceId;
    }
    uint256[50] private __gap;
}

// SPDX-License-Identifier: CC0-1.0

pragma solidity 0.8.18;

/**
 * @notice Sourced from:
 * https://docs.delegate.cash/delegatecash/technical-documentation/delegation-registry/idelegationregistry.sol
 */

/**
 * @title An immutable registry contract to be deployed as a standalone primitive
 * @dev See EIP-5639, new project launches can read previous cold wallet -> hot wallet delegations
 *      from here and integrate those permissions into their flow
 */
interface IDelegationRegistry {
    /// @notice Delegation type
    enum DelegationType {
        NONE,
        ALL,
        CONTRACT,
        TOKEN
    }

    /// @notice Info about a single delegation, used for onchain enumeration
    struct DelegationInfo {
        DelegationType type_;
        address vault;
        address delegate;
        address contract_;
        uint256 tokenId;
    }

    /// @notice Info about a single contract-level delegation
    struct ContractDelegation {
        address contract_;
        address delegate;
    }

    /// @notice Info about a single token-level delegation
    struct TokenDelegation {
        address contract_;
        uint256 tokenId;
        address delegate;
    }

    /// @notice Emitted when a user delegates their entire wallet
    event DelegateForAll(address vault, address delegate, bool value);

    /// @notice Emitted when a user delegates a specific contract
    event DelegateForContract(address vault, address delegate, address contract_, bool value);

    /// @notice Emitted when a user delegates a specific token
    event DelegateForToken(address vault, address delegate, address contract_, uint256 tokenId, bool value);

    /// @notice Emitted when a user revokes all delegations
    event RevokeAllDelegates(address vault);

    /// @notice Emitted when a user revoes all delegations for a given delegate
    event RevokeDelegate(address vault, address delegate);

    /**
     * -----------  WRITE -----------
     */

    /**
     * @notice Allow the delegate to act on your behalf for all contracts
     * @param delegate The hotwallet to act on your behalf
     * @param value Whether to enable or disable delegation for this address, true for setting and false for revoking
     */
    function delegateForAll(address delegate, bool value) external;

    /**
     * @notice Allow the delegate to act on your behalf for a specific contract
     * @param delegate The hotwallet to act on your behalf
     * @param contract_ The address for the contract you're delegating
     * @param value Whether to enable or disable delegation for this address, true for setting and false for revoking
     */
    function delegateForContract(address delegate, address contract_, bool value) external;

    /**
     * @notice Allow the delegate to act on your behalf for a specific token
     * @param delegate The hotwallet to act on your behalf
     * @param contract_ The address for the contract you're delegating
     * @param tokenId The token id for the token you're delegating
     * @param value Whether to enable or disable delegation for this address, true for setting and false for revoking
     */
    function delegateForToken(address delegate, address contract_, uint256 tokenId, bool value) external;

    /**
     * @notice Revoke all delegates
     */
    function revokeAllDelegates() external;

    /**
     * @notice Revoke a specific delegate for all their permissions
     * @param delegate The hotwallet to revoke
     */
    function revokeDelegate(address delegate) external;

    /**
     * @notice Remove yourself as a delegate for a specific vault
     * @param vault The vault which delegated to the msg.sender, and should be removed
     */
    function revokeSelf(address vault) external;

    /**
     * -----------  READ -----------
     */

    /**
     * @notice Returns all active delegations a given delegate is able to claim on behalf of
     * @param delegate The delegate that you would like to retrieve delegations for
     * @return info Array of DelegationInfo structs
     */
    function getDelegationsByDelegate(address delegate) external view returns (DelegationInfo[] memory);

    /**
     * @notice Returns an array of wallet-level delegates for a given vault
     * @param vault The cold wallet who issued the delegation
     * @return addresses Array of wallet-level delegates for a given vault
     */
    function getDelegatesForAll(address vault) external view returns (address[] memory);

    /**
     * @notice Returns an array of contract-level delegates for a given vault and contract
     * @param vault The cold wallet who issued the delegation
     * @param contract_ The address for the contract you're delegating
     * @return addresses Array of contract-level delegates for a given vault and contract
     */
    function getDelegatesForContract(address vault, address contract_) external view returns (address[] memory);

    /**
     * @notice Returns an array of contract-level delegates for a given vault's token
     * @param vault The cold wallet who issued the delegation
     * @param contract_ The address for the contract holding the token
     * @param tokenId The token id for the token you're delegating
     * @return addresses Array of contract-level delegates for a given vault's token
     */
    function getDelegatesForToken(address vault, address contract_, uint256 tokenId)
        external
        view
        returns (address[] memory);

    /**
     * @notice Returns all contract-level delegations for a given vault
     * @param vault The cold wallet who issued the delegations
     * @return delegations Array of ContractDelegation structs
     */
    function getContractLevelDelegations(address vault)
        external
        view
        returns (ContractDelegation[] memory delegations);

    /**
     * @notice Returns all token-level delegations for a given vault
     * @param vault The cold wallet who issued the delegations
     * @return delegations Array of TokenDelegation structs
     */
    function getTokenLevelDelegations(address vault) external view returns (TokenDelegation[] memory delegations);

    /**
     * @notice Returns true if the address is delegated to act on the entire vault
     * @param delegate The hotwallet to act on your behalf
     * @param vault The cold wallet who issued the delegation
     */
    function checkDelegateForAll(address delegate, address vault) external view returns (bool);

    /**
     * @notice Returns true if the address is delegated to act on your behalf for a token contract or an entire vault
     * @param delegate The hotwallet to act on your behalf
     * @param contract_ The address for the contract you're delegating
     * @param vault The cold wallet who issued the delegation
     */
    function checkDelegateForContract(address delegate, address vault, address contract_)
        external
        view
        returns (bool);

    /**
     * @notice Returns true if the address is delegated to act on your behalf for a specific token, the token's contract or an entire vault
     * @param delegate The hotwallet to act on your behalf
     * @param contract_ The address for the contract you're delegating
     * @param tokenId The token id for the token you're delegating
     * @param vault The cold wallet who issued the delegation
     */
    function checkDelegateForToken(address delegate, address vault, address contract_, uint256 tokenId)
        external
        view
        returns (bool);
}

// SPDX-License-Identifier: GPL-3.0-only

pragma solidity 0.8.18;

import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/access/AccessControlEnumerable.sol";

import "../interfaces/ICallWhitelist.sol";

import "./CallBlacklist.sol";

import {
    CW_AlreadyWhitelisted,
    CW_NotWhitelisted
} from "../errors/Vault.sol";

/**
 * @title CallWhitelist
 * @author Non-Fungible Technologies, Inc.
 *
 * Maintains a whitelist for calls that can be made from an AssetVault.
 * Intended to be used to allow for "claim" and other-utility based
 * functions while an asset is being held in escrow. Some functions
 * are blacklisted, e.g. transfer functions, to prevent callers from
 * being able to circumvent withdrawal rules for escrowed assets.
 * Whitelists are specified in terms of "target contract" (callee)
 * and function selector.
 *
 * The contract owner can add or remove items from the whitelist.
 */
contract CallWhitelist is AccessControlEnumerable, CallBlacklist, ICallWhitelist {
    using SafeERC20 for IERC20;

    // ============================================ STATE ==============================================

    // =================== Constants =====================

    bytes32 public constant ADMIN_ROLE = keccak256("ADMIN");
    bytes32 public constant WHITELIST_MANAGER_ROLE = keccak256("WHITELIST_MANAGER");

    // ================= Whitelist State ==================

    /**
     * @notice Whitelist of callable functions on contracts. Maps addresses that
     *         can be called to function selectors which can be called on it.
     *         For example, if we want to allow function call 0x0000 on a contract
     *         at 0x1111, the mapping will contain whitelist[0x1111][0x0000] = true.
     */
    mapping(address => mapping(bytes4 => bool)) private whitelist;

    // ========================================= CONSTRUCTOR ===========================================

    /**
     * @notice Creates a new call whitelist contract, setting up required roles.
     */
    constructor() {
        _setupRole(ADMIN_ROLE, msg.sender);

        _setRoleAdmin(ADMIN_ROLE, ADMIN_ROLE);
        _setRoleAdmin(WHITELIST_MANAGER_ROLE, ADMIN_ROLE);
    }

    // ========================================= VIEW FUNCTIONS =========================================

    /**
     * @notice Returns true if the given function on the given callee is whitelisted.
     *
     * @param callee                The contract that is intended to be called.
     * @param selector              The function selector that is intended to be called.
     *
     * @return isWhitelisted        True if whitelisted, else false.
     */
    function isWhitelisted(address callee, bytes4 selector) external view override returns (bool) {
        return !isBlacklisted(selector) && whitelist[callee][selector];
    }

    // ======================================== UPDATE OPERATIONS =======================================

    /**
     * @notice Add the given callee and selector to the whitelist. Can only be called by owner.
     *
     * @dev    A blacklist supersedes a whitelist, so should not add blacklisted selectors.
     *         Calls which are already whitelisted will revert.
     *
     * @param callee                The contract to whitelist.
     * @param selector              The function selector to whitelist.
     */
    function add(address callee, bytes4 selector) external override onlyRole(WHITELIST_MANAGER_ROLE) {
        mapping(bytes4 => bool) storage calleeWhitelist = whitelist[callee];

        if (calleeWhitelist[selector]) revert CW_AlreadyWhitelisted(callee, selector);
        calleeWhitelist[selector] = true;

        emit CallAdded(msg.sender, callee, selector);
    }

    /**
     * @notice Remove the given callee and selector from the whitelist. Can only be called by owner.
     *
     * @dev   Calls which are not already whitelisted will revert.
     *
     * @param callee                The contract to whitelist.
     * @param selector              The function selector to whitelist.
     */
    function remove(address callee, bytes4 selector) external override onlyRole(WHITELIST_MANAGER_ROLE) {
        mapping(bytes4 => bool) storage calleeWhitelist = whitelist[callee];

        if (!calleeWhitelist[selector]) revert CW_NotWhitelisted(callee, selector);
        calleeWhitelist[selector] = false;

        emit CallRemoved(msg.sender, callee, selector);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IAccessControlEnumerable.sol";
import "./AccessControl.sol";
import "../utils/structs/EnumerableSet.sol";

/**
 * @dev Extension of {AccessControl} that allows enumerating the members of each role.
 */
abstract contract AccessControlEnumerable is IAccessControlEnumerable, AccessControl {
    using EnumerableSet for EnumerableSet.AddressSet;

    mapping(bytes32 => EnumerableSet.AddressSet) private _roleMembers;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControlEnumerable).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) public view override returns (address) {
        return _roleMembers[role].at(index);
    }

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) public view override returns (uint256) {
        return _roleMembers[role].length();
    }

    /**
     * @dev Overload {grantRole} to track enumerable memberships
     */
    function grantRole(bytes32 role, address account) public virtual override(AccessControl, IAccessControl) {
        super.grantRole(role, account);
        _roleMembers[role].add(account);
    }

    /**
     * @dev Overload {revokeRole} to track enumerable memberships
     */
    function revokeRole(bytes32 role, address account) public virtual override(AccessControl, IAccessControl) {
        super.revokeRole(role, account);
        _roleMembers[role].remove(account);
    }

    /**
     * @dev Overload {renounceRole} to track enumerable memberships
     */
    function renounceRole(bytes32 role, address account) public virtual override(AccessControl, IAccessControl) {
        super.renounceRole(role, account);
        _roleMembers[role].remove(account);
    }

    /**
     * @dev Overload {_setupRole} to track enumerable memberships
     */
    function _setupRole(bytes32 role, address account) internal virtual override {
        super._setupRole(role, account);
        _roleMembers[role].add(account);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.18;

interface ICallWhitelist {
    // ============= Events ==============

    event CallAdded(address operator, address callee, bytes4 selector);
    event CallRemoved(address operator, address callee, bytes4 selector);

    // ================ View Functions ================

    function isWhitelisted(address callee, bytes4 selector) external view returns (bool);

    // ================ Update Operations ================

    function add(address callee, bytes4 selector) external;

    function remove(address callee, bytes4 selector) external;
}

// SPDX-License-Identifier: GPL-3.0-only

pragma solidity 0.8.18;

import "@openzeppelin/contracts/token/ERC1155/IERC1155.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721.sol";

//solhint-disable max-line-length

/**
 * @title CallBlacklist
 * @author Non-Fungible Technologies, Inc.
 *
 * Library contract maintaining an immutable blacklist for any CallWhitelist contract
 * (or CallWhitelistApprovals). These functions can never be called through the vault's
 * `call` functionality. Note that CallWhitelistApprovals still allows approvals to take
 * place based on certain spenders set in `setApproval`.
 */
abstract contract CallBlacklist {
    // ============================================ STATE ==============================================

    // ============= Global Immutable State ==============

    /**
     * @dev Global blacklist for transfer functions.
     */
    bytes4 private constant ERC20_TRANSFER = IERC20.transfer.selector;
    bytes4 private constant ERC20_ERC721_APPROVE = IERC20.approve.selector;
    bytes4 private constant ERC20_ERC721_TRANSFER_FROM = IERC20.transferFrom.selector;
    bytes4 private constant ERC20_INCREASE_ALLOWANCE = bytes4(keccak256("increaseAllowance(address,uint256)"));
    bytes4 private constant ERC20_BURN = bytes4(keccak256("burn(address,uint256)"));
    bytes4 private constant ERC20_BURN_FROM = bytes4(keccak256("burnFrom(address,uint256)"));

    bytes4 private constant ERC721_SAFE_TRANSFER_FROM = bytes4(keccak256("safeTransferFrom(address,address,uint256)"));
    bytes4 private constant ERC721_SAFE_TRANSFER_FROM_DATA = bytes4(keccak256("safeTransferFrom(address,address,uint256,bytes)"));
    bytes4 private constant ERC721_ERC1155_SET_APPROVAL = IERC721.setApprovalForAll.selector;
    bytes4 private constant ERC721_BURN = bytes4(keccak256("burn(uint256)"));

    bytes4 private constant ERC1155_SAFE_TRANSFER_FROM = IERC1155.safeTransferFrom.selector;
    bytes4 private constant ERC1155_SAFE_BATCH_TRANSFER_FROM = IERC1155.safeBatchTransferFrom.selector;
    bytes4 private constant ERC1155_BURN = bytes4(keccak256("burn(address,uint256,uint256)"));
    bytes4 private constant ERC1155_BURN_BATCH = bytes4(keccak256("burn(address,uint256[],uint256[])"));

    bytes4 private constant PUNKS_TRANSFER = bytes4(keccak256("transferPunk(address,uint256)"));
    bytes4 private constant PUNKS_OFFER = bytes4(keccak256("offerPunkForSale(uint256,uint256)"));
    bytes4 private constant PUNKS_OFFER_TO_ADDRESS = bytes4(keccak256("offerPunkForSaleToAddress(uint256,uint256,address)"));
    bytes4 private constant PUNKS_BUY = bytes4(keccak256("buyPunk(uint256)"));

    bytes4 private constant SUPERRARE_SET_SALE_PRICE = bytes4(keccak256("setSalePrice(uint256,uint256)"));
    bytes4 private constant SUPERRARE_ACCEPT_BID = bytes4(keccak256("acceptBid(uint256)"));
    // SuperRare transfer already blacklisted - same elector as IERC20.transfer
    // SuperRare approve already blacklisted - same elector as IERC20.approve

    // ================= Blacklist State ==================

    /**
     * @notice Returns true if the given function selector is on the global blacklist.
     *         Blacklisted function selectors cannot be called on any contract.
     *
     * @param selector              The function selector to check.
     *
     * @return isBlacklisted        True if blacklisted, else false.
     */
    function isBlacklisted(bytes4 selector) public pure returns (bool) {
        return
            selector == ERC20_TRANSFER ||
            selector == ERC20_ERC721_APPROVE ||
            selector == ERC20_ERC721_TRANSFER_FROM ||
            selector == ERC20_INCREASE_ALLOWANCE ||
            selector == ERC20_BURN ||
            selector == ERC20_BURN_FROM ||
            selector == ERC721_SAFE_TRANSFER_FROM ||
            selector == ERC721_SAFE_TRANSFER_FROM_DATA ||
            selector == ERC721_ERC1155_SET_APPROVAL ||
            selector == ERC721_BURN ||
            selector == ERC1155_SAFE_TRANSFER_FROM ||
            selector == ERC1155_SAFE_BATCH_TRANSFER_FROM ||
            selector == ERC1155_BURN ||
            selector == ERC1155_BURN_BATCH ||
            selector == PUNKS_TRANSFER ||
            selector == PUNKS_OFFER ||
            selector == PUNKS_OFFER_TO_ADDRESS ||
            selector == PUNKS_BUY ||
            selector == SUPERRARE_SET_SALE_PRICE ||
            selector == SUPERRARE_ACCEPT_BID;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IAccessControl.sol";

/**
 * @dev External interface of AccessControlEnumerable declared to support ERC165 detection.
 */
interface IAccessControlEnumerable is IAccessControl {
    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) external view returns (address);

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) external view returns (uint256);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IAccessControl.sol";
import "../utils/Context.sol";
import "../utils/Strings.sol";
import "../utils/introspection/ERC165.sol";

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it.
 */
abstract contract AccessControl is Context, IAccessControl, ERC165 {
    struct RoleData {
        mapping(address => bool) members;
        bytes32 adminRole;
    }

    mapping(bytes32 => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with a standardized message including the required role.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     *
     * _Available since v4.1._
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role, _msgSender());
        _;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view override returns (bool) {
        return _roles[role].members[account];
    }

    /**
     * @dev Revert with a standard message if `account` is missing `role`.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     */
    function _checkRole(bytes32 role, address account) internal view {
        if (!hasRole(role, account)) {
            revert(
                string(
                    abi.encodePacked(
                        "AccessControl: account ",
                        Strings.toHexString(uint160(account), 20),
                        " is missing role ",
                        Strings.toHexString(uint256(role), 32)
                    )
                )
            );
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view override returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) public virtual override {
        require(account == _msgSender(), "AccessControl: can only renounce roles for self");

        _revokeRole(role, account);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        bytes32 previousAdminRole = getRoleAdmin(role);
        _roles[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }

    function _grantRole(bytes32 role, address account) private {
        if (!hasRole(role, account)) {
            _roles[role].members[account] = true;
            emit RoleGranted(role, account, _msgSender());
        }
    }

    function _revokeRole(bytes32 role, address account) private {
        if (hasRole(role, account)) {
            _roles[role].members[account] = false;
            emit RoleRevoked(role, account, _msgSender());
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastvalue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastvalue;
                // Update the index for the moved value
                set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        return _values(set._inner);
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControl {
    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     *
     * _Available since v3.1._
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {AccessControl-_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC1155 compliant contract, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1155[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155 is IERC165 {
    /**
     * @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
     */
    event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);

    /**
     * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
     * transfers.
     */
    event TransferBatch(
        address indexed operator,
        address indexed from,
        address indexed to,
        uint256[] ids,
        uint256[] values
    );

    /**
     * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
     * `approved`.
     */
    event ApprovalForAll(address indexed account, address indexed operator, bool approved);

    /**
     * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
     *
     * If an {URI} event was emitted for `id`, the standard
     * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
     * returned by {IERC1155MetadataURI-uri}.
     */
    event URI(string value, uint256 indexed id);

    /**
     * @dev Returns the amount of tokens of token type `id` owned by `account`.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) external view returns (uint256);

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
        external
        view
        returns (uint256[] memory);

    /**
     * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
     *
     * Emits an {ApprovalForAll} event.
     *
     * Requirements:
     *
     * - `operator` cannot be the caller.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address account, address operator) external view returns (bool);

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes calldata data
    ) external;

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] calldata ids,
        uint256[] calldata amounts,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;
}

{
  "metadata": {
    "bytecodeHash": "none"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"ownershipToken","type":"address"}],"name":"AV_AlreadyInitialized","type":"error"},{"inputs":[{"internalType":"string","name":"arrayType","type":"string"}],"name":"AV_LengthMismatch","type":"error"},{"inputs":[{"internalType":"address","name":"caller","type":"address"}],"name":"AV_MissingAuthorization","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"AV_NonWhitelistedApproval","type":"error"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"bytes4","name":"data","type":"bytes4"}],"name":"AV_NonWhitelistedCall","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"AV_NonWhitelistedDelegation","type":"error"},{"inputs":[{"internalType":"uint256","name":"arrayLength","type":"uint256"}],"name":"AV_TooManyItems","type":"error"},{"inputs":[],"name":"AV_WithdrawsDisabled","type":"error"},{"inputs":[],"name":"AV_WithdrawsEnabled","type":"error"},{"inputs":[{"internalType":"string","name":"addressType","type":"string"}],"name":"AV_ZeroAddress","type":"error"},{"inputs":[{"internalType":"address","name":"caller","type":"address"}],"name":"OERC721_CallerNotOwner","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":true,"internalType":"address","name":"token","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Approve","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"bytes","name":"data","type":"bytes"}],"name":"Call","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":true,"internalType":"address","name":"token","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"DecreaseAllowance","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":true,"internalType":"address","name":"token","type":"address"},{"indexed":true,"internalType":"address","name":"target","type":"address"},{"indexed":false,"internalType":"bool","name":"enabled","type":"bool"}],"name":"DelegateContract","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"operator","type":"address"}],"name":"DelegateRevoke","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":true,"internalType":"address","name":"token","type":"address"},{"indexed":true,"internalType":"address","name":"target","type":"address"},{"indexed":false,"internalType":"uint256","name":"tokenId","type":"uint256"},{"indexed":false,"internalType":"bool","name":"enabled","type":"bool"}],"name":"DelegateToken","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":true,"internalType":"address","name":"token","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"IncreaseAllowance","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"caller","type":"address"},{"indexed":true,"internalType":"address","name":"ownershipToken","type":"address"}],"name":"SetOwnershipToken","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":true,"internalType":"address","name":"token","type":"address"},{"indexed":false,"internalType":"address","name":"recipient","type":"address"},{"indexed":false,"internalType":"uint256","name":"tokenId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"WithdrawERC1155","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":true,"internalType":"address","name":"token","type":"address"},{"indexed":false,"internalType":"address","name":"recipient","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"WithdrawERC20","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":true,"internalType":"address","name":"token","type":"address"},{"indexed":false,"internalType":"address","name":"recipient","type":"address"},{"indexed":false,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"WithdrawERC721","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":true,"internalType":"address","name":"recipient","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"WithdrawETH","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"operator","type":"address"}],"name":"WithdrawEnabled","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":true,"internalType":"address","name":"token","type":"address"},{"indexed":false,"internalType":"address","name":"recipient","type":"address"},{"indexed":false,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"WithdrawPunk","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":true,"internalType":"address","name":"token","type":"address"},{"indexed":false,"internalType":"address","name":"recipient","type":"address"},{"indexed":false,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"WithdrawSuperRareV1","type":"event"},{"inputs":[],"name":"MAX_WITHDRAW_ITEMS","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"call","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"callApprove","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"callDecreaseAllowance","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"target","type":"address"},{"internalType":"bool","name":"enable","type":"bool"}],"name":"callDelegateForContract","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"target","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"bool","name":"enable","type":"bool"}],"name":"callDelegateForToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"callIncreaseAllowance","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"callRevokeAllDelegates","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"enableWithdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_whitelist","type":"address"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"","type":"address"},{"internalType":"uint256[]","name":"","type":"uint256[]"},{"internalType":"uint256[]","name":"","type":"uint256[]"},{"internalType":"bytes","name":"","type":"bytes"}],"name":"onERC1155BatchReceived","outputs":[{"internalType":"bytes4","name":"","type":"bytes4"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"","type":"address"},{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"bytes","name":"","type":"bytes"}],"name":"onERC1155Received","outputs":[{"internalType":"bytes4","name":"","type":"bytes4"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"","type":"address"},{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"bytes","name":"","type":"bytes"}],"name":"onERC721Received","outputs":[{"internalType":"bytes4","name":"","type":"bytes4"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"ownerAddress","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"ownershipToken","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"whitelist","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address[]","name":"tokens","type":"address[]"},{"internalType":"uint256[]","name":"tokenIds","type":"uint256[]"},{"internalType":"enum IAssetVault.TokenType[]","name":"tokenTypes","type":"uint8[]"},{"internalType":"address","name":"to","type":"address"}],"name":"withdrawBatch","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"address","name":"to","type":"address"}],"name":"withdrawERC1155","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"to","type":"address"}],"name":"withdrawERC20","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"address","name":"to","type":"address"}],"name":"withdrawERC721","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"}],"name":"withdrawETH","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"withdrawEnabled","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"punks","type":"address"},{"internalType":"uint256","name":"punkIndex","type":"uint256"},{"internalType":"address","name":"to","type":"address"}],"name":"withdrawPunk","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"superRareV1","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"address","name":"to","type":"address"}],"name":"withdrawSuperRareV1","outputs":[],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]