Contract Source Code (Solidity)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

Outline

•  contract LockRequestable
•    - function LockRequestable()
•    - function generateLockId()
•  contract CustodianUpgradeable is L ...
•    - function CustodianUpgradeable(
•    - function requestCustodianChange(addre ...
•    - function confirmCustodianChange(bytes ...
•    - function getCustodianChangeReq(bytes3 ...
•  contract ERC20ImplUpgradeable is C ...
•    - function ERC20ImplUpgradeable(address ...
•    - function requestImplChange(address _p ...
•    - function confirmImplChange(bytes32 _l ...
•    - function getImplChangeReq(bytes32 _lo ...
•  contract ERC20Interface
•    - function totalSupply()
•    - function balanceOf(address _owner)
•    - function transfer(address _to, uint25 ...
•    - function transferFrom(address _from, ...
•    - function approve(address _spender, ui ...
•    - function allowance(address _owner, ad ...
•  contract ERC20Proxy is ERC20Interf ...
•    - function ERC20Proxy(
•    - function totalSupply()
•    - function balanceOf(address _owner)
•    - function emitTransfer(address _from, ...
•    - function transfer(address _to, uint25 ...
•    - function transferFrom(address _from, ...
•    - function emitApproval(address _owner, ...
•    - function approve(address _spender, ui ...
•    - function increaseApproval(address _sp ...
•    - function decreaseApproval(address _sp ...
•    - function allowance(address _owner, ad ...
•  contract ERC20Impl is CustodianUpg ...
•    - function ERC20Impl(
•    - function approveWithSender(
•    - function increaseApprovalWithSender(
•    - function decreaseApprovalWithSender(
•    - function requestPrint(address _receiv ...
•    - function confirmPrint(bytes32 _lockId ...
•    - function burn(uint256 _value)
•    - function batchTransfer(address[] _tos ...
•    - function enableSweep(uint8[] _vs, byt ...
•    - function replaySweep(address[] _froms ...
•    - function transferFromWithSender(
•    - function transferWithSender(
•    - function totalSupply()
•    - function balanceOf(address _owner)
•    - function allowance(address _owner, ad ...
•  contract ERC20Store is ERC20ImplUp ...
•    - function ERC20Store(address _custodia ...
•    - function setTotalSupply(
•    - function setAllowance(
•    - function setBalance(
•    - function addBalance(
•  contract PrintLimiter is LockReque ... *
•    - function PrintLimiter(
•    - function limitedPrint(address _receiv ...
•    - function requestCeilingRaise(uint256 ...
•    - function confirmCeilingRaise(bytes32 ...
•    - function lowerCeiling(uint256 _lowerB ...
•    - function confirmPrintProxy(bytes32 _l ...
•    - function confirmCustodianChangeProxy( ...

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

/**
 *Submitted for verification at Etherscan.io on 2018-09-10
*/

pragma solidity ^0.4.21;

/** @title  A contract for generating unique identifiers
  *
  * @notice  A contract that provides a identifier generation scheme,
  * guaranteeing uniqueness across all contracts that inherit from it,
  * as well as unpredictability of future identifiers.
  *
  * @dev  This contract is intended to be inherited by any contract that
  * implements the callback software pattern for cooperative custodianship.
  *
  * @author  Gemini Trust Company, LLC
  */
contract LockRequestable {

    // MEMBERS
    /// @notice  the count of all invocations of `generateLockId`.
    uint256 public lockRequestCount;

    // CONSTRUCTOR
    function LockRequestable() public {
        lockRequestCount = 0;
    }

    // FUNCTIONS
    /** @notice  Returns a fresh unique identifier.
      *
      * @dev the generation scheme uses three components.
      * First, the blockhash of the previous block.
      * Second, the deployed address.
      * Third, the next value of the counter.
      * This ensure that identifiers are unique across all contracts
      * following this scheme, and that future identifiers are
      * unpredictable.
      *
      * @return a 32-byte unique identifier.
      */
    function generateLockId() internal returns (bytes32 lockId) {
        return keccak256(block.blockhash(block.number - 1), address(this), ++lockRequestCount);
    }
}


/** @title  A contract to inherit upgradeable custodianship.
  *
  * @notice  A contract that provides re-usable code for upgradeable
  * custodianship. That custodian may be an account or another contract.
  *
  * @dev  This contract is intended to be inherited by any contract
  * requiring a custodian to control some aspect of its functionality.
  * This contract provides the mechanism for that custodianship to be
  * passed from one custodian to the next.
  *
  * @author  Gemini Trust Company, LLC
  */
contract CustodianUpgradeable is LockRequestable {

    // TYPES
    /// @dev  The struct type for pending custodian changes.
    struct CustodianChangeRequest {
        address proposedNew;
    }

    // MEMBERS
    /// @dev  The address of the account or contract that acts as the custodian.
    address public custodian;

    /// @dev  The map of lock ids to pending custodian changes.
    mapping (bytes32 => CustodianChangeRequest) public custodianChangeReqs;

    // CONSTRUCTOR
    function CustodianUpgradeable(
        address _custodian
    )
      LockRequestable()
      public
    {
        custodian = _custodian;
    }

    // MODIFIERS
    modifier onlyCustodian {
        require(msg.sender == custodian);
        _;
    }

    // PUBLIC FUNCTIONS
    // (UPGRADE)

    /** @notice  Requests a change of the custodian associated with this contract.
      *
      * @dev  Returns a unique lock id associated with the request.
      * Anyone can call this function, but confirming the request is authorized
      * by the custodian.
      *
      * @param  _proposedCustodian  The address of the new custodian.
      * @return  lockId  A unique identifier for this request.
      */
    function requestCustodianChange(address _proposedCustodian) public returns (bytes32 lockId) {
        require(_proposedCustodian != address(0));

        lockId = generateLockId();

        custodianChangeReqs[lockId] = CustodianChangeRequest({
            proposedNew: _proposedCustodian
        });

        emit CustodianChangeRequested(lockId, msg.sender, _proposedCustodian);
    }

    /** @notice  Confirms a pending change of the custodian associated with this contract.
      *
      * @dev  When called by the current custodian with a lock id associated with a
      * pending custodian change, the `address custodian` member will be updated with the
      * requested address.
      *
      * @param  _lockId  The identifier of a pending change request.
      */
    function confirmCustodianChange(bytes32 _lockId) public onlyCustodian {
        custodian = getCustodianChangeReq(_lockId);

        delete custodianChangeReqs[_lockId];

        emit CustodianChangeConfirmed(_lockId, custodian);
    }

    // PRIVATE FUNCTIONS
    function getCustodianChangeReq(bytes32 _lockId) private view returns (address _proposedNew) {
        CustodianChangeRequest storage changeRequest = custodianChangeReqs[_lockId];

        // reject ‘null’ results from the map lookup
        // this can only be the case if an unknown `_lockId` is received
        require(changeRequest.proposedNew != 0);

        return changeRequest.proposedNew;
    }

    /// @dev  Emitted by successful `requestCustodianChange` calls.
    event CustodianChangeRequested(
        bytes32 _lockId,
        address _msgSender,
        address _proposedCustodian
    );

    /// @dev Emitted by successful `confirmCustodianChange` calls.
    event CustodianChangeConfirmed(bytes32 _lockId, address _newCustodian);
}


/** @title  A contract to inherit upgradeable token implementations.
  *
  * @notice  A contract that provides re-usable code for upgradeable
  * token implementations. It itself inherits from `CustodianUpgradable`
  * as the upgrade process is controlled by the custodian.
  *
  * @dev  This contract is intended to be inherited by any contract
  * requiring a reference to the active token implementation, either
  * to delegate calls to it, or authorize calls from it. This contract
  * provides the mechanism for that implementation to be be replaced,
  * which constitutes an implementation upgrade.
  *
  * @author Gemini Trust Company, LLC
  */
contract ERC20ImplUpgradeable is CustodianUpgradeable  {

    // TYPES
    /// @dev  The struct type for pending implementation changes.
    struct ImplChangeRequest {
        address proposedNew;
    }

    // MEMBERS
    // @dev  The reference to the active token implementation.
    ERC20Impl public erc20Impl;

    /// @dev  The map of lock ids to pending implementation changes.
    mapping (bytes32 => ImplChangeRequest) public implChangeReqs;

    // CONSTRUCTOR
    function ERC20ImplUpgradeable(address _custodian) CustodianUpgradeable(_custodian) public {
        erc20Impl = ERC20Impl(0x0);
    }

    // MODIFIERS
    modifier onlyImpl {
        require(msg.sender == address(erc20Impl));
        _;
    }

    // PUBLIC FUNCTIONS
    // (UPGRADE)
    /** @notice  Requests a change of the active implementation associated
      * with this contract.
      *
      * @dev  Returns a unique lock id associated with the request.
      * Anyone can call this function, but confirming the request is authorized
      * by the custodian.
      *
      * @param  _proposedImpl  The address of the new active implementation.
      * @return  lockId  A unique identifier for this request.
      */
    function requestImplChange(address _proposedImpl) public returns (bytes32 lockId) {
        require(_proposedImpl != address(0));

        lockId = generateLockId();

        implChangeReqs[lockId] = ImplChangeRequest({
            proposedNew: _proposedImpl
        });

        emit ImplChangeRequested(lockId, msg.sender, _proposedImpl);
    }

    /** @notice  Confirms a pending change of the active implementation
      * associated with this contract.
      *
      * @dev  When called by the custodian with a lock id associated with a
      * pending change, the `ERC20Impl erc20Impl` member will be updated
      * with the requested address.
      *
      * @param  _lockId  The identifier of a pending change request.
      */
    function confirmImplChange(bytes32 _lockId) public onlyCustodian {
        erc20Impl = getImplChangeReq(_lockId);

        delete implChangeReqs[_lockId];

        emit ImplChangeConfirmed(_lockId, address(erc20Impl));
    }

    // PRIVATE FUNCTIONS
    function getImplChangeReq(bytes32 _lockId) private view returns (ERC20Impl _proposedNew) {
        ImplChangeRequest storage changeRequest = implChangeReqs[_lockId];

        // reject ‘null’ results from the map lookup
        // this can only be the case if an unknown `_lockId` is received
        require(changeRequest.proposedNew != address(0));

        return ERC20Impl(changeRequest.proposedNew);
    }

    /// @dev  Emitted by successful `requestImplChange` calls.
    event ImplChangeRequested(
        bytes32 _lockId,
        address _msgSender,
        address _proposedImpl
    );

    /// @dev Emitted by successful `confirmImplChange` calls.
    event ImplChangeConfirmed(bytes32 _lockId, address _newImpl);
}


contract ERC20Interface {
  // METHODS

  // NOTE:
  //   public getter functions are not currently recognised as an
  //   implementation of the matching abstract function by the compiler.

  // https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20.md#name
  // function name() public view returns (string);

  // https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20.md#symbol
  // function symbol() public view returns (string);

  // https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20.md#totalsupply
  // function decimals() public view returns (uint8);

  // https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20.md#totalsupply
  function totalSupply() public view returns (uint256);

  // https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20.md#balanceof
  function balanceOf(address _owner) public view returns (uint256 balance);

  // https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20.md#transfer
  function transfer(address _to, uint256 _value) public returns (bool success);

  // https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20.md#transferfrom
  function transferFrom(address _from, address _to, uint256 _value) public returns (bool success);

  // https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20.md#approve
  function approve(address _spender, uint256 _value) public returns (bool success);

  // https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20.md#allowance
  function allowance(address _owner, address _spender) public view returns (uint256 remaining);

  // EVENTS
  // https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20.md#transfer-1
  event Transfer(address indexed _from, address indexed _to, uint256 _value);

  // https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20.md#approval
  event Approval(address indexed _owner, address indexed _spender, uint256 _value);
}


/** @title  Public interface to ERC20 compliant token.
  *
  * @notice  This contract is a permanent entry point to an ERC20 compliant
  * system of contracts.
  *
  * @dev  This contract contains no business logic and instead
  * delegates to an instance of ERC20Impl. This contract also has no storage
  * that constitutes the operational state of the token. This contract is
  * upgradeable in the sense that the `custodian` can update the
  * `erc20Impl` address, thus redirecting the delegation of business logic.
  * The `custodian` is also authorized to pass custodianship.
  *
  * @author  Gemini Trust Company, LLC
  */
contract ERC20Proxy is ERC20Interface, ERC20ImplUpgradeable {

    // MEMBERS
    /// @notice  Returns the name of the token.
    string public name;

    /// @notice  Returns the symbol of the token.
    string public symbol;

    /// @notice  Returns the number of decimals the token uses.
    uint8 public decimals;

    // CONSTRUCTOR
    function ERC20Proxy(
        string _name,
        string _symbol,
        uint8 _decimals,
        address _custodian
    )
        ERC20ImplUpgradeable(_custodian)
        public
    {
        name = _name;
        symbol = _symbol;
        decimals = _decimals;
    }

    // PUBLIC FUNCTIONS
    // (ERC20Interface)
    /** @notice  Returns the total token supply.
      *
      * @return  the total token supply.
      */
    function totalSupply() public view returns (uint256) {
        return erc20Impl.totalSupply();
    }

    /** @notice  Returns the account balance of another account with address
      * `_owner`.
      *
      * @return  balance  the balance of account with address `_owner`.
      */
    function balanceOf(address _owner) public view returns (uint256 balance) {
        return erc20Impl.balanceOf(_owner);
    }

    /** @dev Internal use only.
      */
    function emitTransfer(address _from, address _to, uint256 _value) public onlyImpl {
        emit Transfer(_from, _to, _value);
    }

    /** @notice  Transfers `_value` amount of tokens to address `_to`.
      *
      * @dev Will fire the `Transfer` event. Will revert if the `_from`
      * account balance does not have enough tokens to spend.
      *
      * @return  success  true if transfer completes.
      */
    function transfer(address _to, uint256 _value) public returns (bool success) {
        return erc20Impl.transferWithSender(msg.sender, _to, _value);
    }

    /** @notice  Transfers `_value` amount of tokens from address `_from`
      * to address `_to`.
      *
      * @dev  Will fire the `Transfer` event. Will revert unless the `_from`
      * account has deliberately authorized the sender of the message
      * via some mechanism.
      *
      * @return  success  true if transfer completes.
      */
    function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
        return erc20Impl.transferFromWithSender(msg.sender, _from, _to, _value);
    }

    /** @dev Internal use only.
      */
    function emitApproval(address _owner, address _spender, uint256 _value) public onlyImpl {
        emit Approval(_owner, _spender, _value);
    }

    /** @notice  Allows `_spender` to withdraw from your account multiple times,
      * up to the `_value` amount. If this function is called again it
      * overwrites the current allowance with _value.
      *
      * @dev  Will fire the `Approval` event.
      *
      * @return  success  true if approval completes.
      */
    function approve(address _spender, uint256 _value) public returns (bool success) {
        return erc20Impl.approveWithSender(msg.sender, _spender, _value);
    }

    /** @notice Increases the amount `_spender` is allowed to withdraw from
      * your account.
      * This function is implemented to avoid the race condition in standard
      * ERC20 contracts surrounding the `approve` method.
      *
      * @dev  Will fire the `Approval` event. This function should be used instead of
      * `approve`.
      *
      * @return  success  true if approval completes.
      */
    function increaseApproval(address _spender, uint256 _addedValue) public returns (bool success) {
        return erc20Impl.increaseApprovalWithSender(msg.sender, _spender, _addedValue);
    }

    /** @notice  Decreases the amount `_spender` is allowed to withdraw from
      * your account. This function is implemented to avoid the race
      * condition in standard ERC20 contracts surrounding the `approve` method.
      *
      * @dev  Will fire the `Approval` event. This function should be used
      * instead of `approve`.
      *
      * @return  success  true if approval completes.
      */
    function decreaseApproval(address _spender, uint256 _subtractedValue) public returns (bool success) {
        return erc20Impl.decreaseApprovalWithSender(msg.sender, _spender, _subtractedValue);
    }

    /** @notice  Returns how much `_spender` is currently allowed to spend from
      * `_owner`'s balance.
      *
      * @return  remaining  the remaining allowance.
      */
    function allowance(address _owner, address _spender) public view returns (uint256 remaining) {
        return erc20Impl.allowance(_owner, _spender);
    }
}


/** @title  ERC20 compliant token intermediary contract holding core logic.
  *
  * @notice  This contract serves as an intermediary between the exposed ERC20
  * interface in ERC20Proxy and the store of balances in ERC20Store. This
  * contract contains core logic that the proxy can delegate to
  * and that the store is called by.
  *
  * @dev  This contract contains the core logic to implement the
  * ERC20 specification as well as several extensions.
  * 1. Changes to the token supply.
  * 2. Batched transfers.
  * 3. Relative changes to spending approvals.
  * 4. Delegated transfer control ('sweeping').
  *
  * @author  Gemini Trust Company, LLC
  */
contract ERC20Impl is CustodianUpgradeable {

    // TYPES
    /// @dev  The struct type for pending increases to the token supply (print).
    struct PendingPrint {
        address receiver;
        uint256 value;
    }

    // MEMBERS
    /// @dev  The reference to the proxy.
    ERC20Proxy public erc20Proxy;

    /// @dev  The reference to the store.
    ERC20Store public erc20Store;

    /// @dev  The sole authorized caller of delegated transfer control ('sweeping').
    address public sweeper;

    /** @dev  The static message to be signed by an external account that
      * signifies their permission to forward their balance to any arbitrary
      * address. This is used to consolidate the control of all accounts
      * backed by a shared keychain into the control of a single key.
      * Initialized as the concatenation of the address of this contract
      * and the word "sweep". This concatenation is done to prevent a replay
      * attack in a subsequent contract, where the sweep message could
      * potentially be replayed to re-enable sweeping ability.
      */
    bytes32 public sweepMsg;

    /** @dev  The mapping that stores whether the address in question has
      * enabled sweeping its contents to another account or not.
      * If an address maps to "true", it has already enabled sweeping,
      * and thus does not need to re-sign the `sweepMsg` to enact the sweep.
      */
    mapping (address => bool) public sweptSet;

    /// @dev  The map of lock ids to pending token increases.
    mapping (bytes32 => PendingPrint) public pendingPrintMap;

    // CONSTRUCTOR
    function ERC20Impl(
          address _erc20Proxy,
          address _erc20Store,
          address _custodian,
          address _sweeper
    )
        CustodianUpgradeable(_custodian)
        public
    {
        require(_sweeper != 0);
        erc20Proxy = ERC20Proxy(_erc20Proxy);
        erc20Store = ERC20Store(_erc20Store);

        sweeper = _sweeper;
        sweepMsg = keccak256(address(this), "sweep");
    }

    // MODIFIERS
    modifier onlyProxy {
        require(msg.sender == address(erc20Proxy));
        _;
    }
    modifier onlySweeper {
        require(msg.sender == sweeper);
        _;
    }


    /** @notice  Core logic of the ERC20 `approve` function.
      *
      * @dev  This function can only be called by the referenced proxy,
      * which has an `approve` function.
      * Every argument passed to that function as well as the original
      * `msg.sender` gets passed to this function.
      * NOTE: approvals for the zero address (unspendable) are disallowed.
      *
      * @param  _sender  The address initiating the approval in proxy.
      */
    function approveWithSender(
        address _sender,
        address _spender,
        uint256 _value
    )
        public
        onlyProxy
        returns (bool success)
    {
        require(_spender != address(0)); // disallow unspendable approvals
        erc20Store.setAllowance(_sender, _spender, _value);
        erc20Proxy.emitApproval(_sender, _spender, _value);
        return true;
    }

    /** @notice  Core logic of the `increaseApproval` function.
      *
      * @dev  This function can only be called by the referenced proxy,
      * which has an `increaseApproval` function.
      * Every argument passed to that function as well as the original
      * `msg.sender` gets passed to this function.
      * NOTE: approvals for the zero address (unspendable) are disallowed.
      *
      * @param  _sender  The address initiating the approval.
      */
    function increaseApprovalWithSender(
        address _sender,
        address _spender,
        uint256 _addedValue
    )
        public
        onlyProxy
        returns (bool success)
    {
        require(_spender != address(0)); // disallow unspendable approvals
        uint256 currentAllowance = erc20Store.allowed(_sender, _spender);
        uint256 newAllowance = currentAllowance + _addedValue;

        require(newAllowance >= currentAllowance);

        erc20Store.setAllowance(_sender, _spender, newAllowance);
        erc20Proxy.emitApproval(_sender, _spender, newAllowance);
        return true;
    }

    /** @notice  Core logic of the `decreaseApproval` function.
      *
      * @dev  This function can only be called by the referenced proxy,
      * which has a `decreaseApproval` function.
      * Every argument passed to that function as well as the original
      * `msg.sender` gets passed to this function.
      * NOTE: approvals for the zero address (unspendable) are disallowed.
      *
      * @param  _sender  The address initiating the approval.
      */
    function decreaseApprovalWithSender(
        address _sender,
        address _spender,
        uint256 _subtractedValue
    )
        public
        onlyProxy
        returns (bool success)
    {
        require(_spender != address(0)); // disallow unspendable approvals
        uint256 currentAllowance = erc20Store.allowed(_sender, _spender);
        uint256 newAllowance = currentAllowance - _subtractedValue;

        require(newAllowance <= currentAllowance);

        erc20Store.setAllowance(_sender, _spender, newAllowance);
        erc20Proxy.emitApproval(_sender, _spender, newAllowance);
        return true;
    }

    /** @notice  Requests an increase in the token supply, with the newly created
      * tokens to be added to the balance of the specified account.
      *
      * @dev  Returns a unique lock id associated with the request.
      * Anyone can call this function, but confirming the request is authorized
      * by the custodian.
      * NOTE: printing to the zero address is disallowed.
      *
      * @param  _receiver  The receiving address of the print, if confirmed.
      * @param  _value  The number of tokens to add to the total supply and the
      * balance of the receiving address, if confirmed.
      *
      * @return  lockId  A unique identifier for this request.
      */
    function requestPrint(address _receiver, uint256 _value) public returns (bytes32 lockId) {
        require(_receiver != address(0));

        lockId = generateLockId();

        pendingPrintMap[lockId] = PendingPrint({
            receiver: _receiver,
            value: _value
        });

        emit PrintingLocked(lockId, _receiver, _value);
    }

    /** @notice  Confirms a pending increase in the token supply.
      *
      * @dev  When called by the custodian with a lock id associated with a
      * pending increase, the amount requested to be printed in the print request
      * is printed to the receiving address specified in that same request.
      * NOTE: this function will not execute any print that would overflow the
      * total supply, but it will not revert either.
      *
      * @param  _lockId  The identifier of a pending print request.
      */
    function confirmPrint(bytes32 _lockId) public onlyCustodian {
        PendingPrint storage print = pendingPrintMap[_lockId];

        // reject ‘null’ results from the map lookup
        // this can only be the case if an unknown `_lockId` is received
        address receiver = print.receiver;
        require (receiver != address(0));
        uint256 value = print.value;

        delete pendingPrintMap[_lockId];

        uint256 supply = erc20Store.totalSupply();
        uint256 newSupply = supply + value;
        if (newSupply >= supply) {
          erc20Store.setTotalSupply(newSupply);
          erc20Store.addBalance(receiver, value);

          emit PrintingConfirmed(_lockId, receiver, value);
          erc20Proxy.emitTransfer(address(0), receiver, value);
        }
    }

    /** @notice  Burns the specified value from the sender's balance.
      *
      * @dev  Sender's balanced is subtracted by the amount they wish to burn.
      *
      * @param  _value  The amount to burn.
      *
      * @return  success  true if the burn succeeded.
      */
    function burn(uint256 _value) public returns (bool success) {
        uint256 balanceOfSender = erc20Store.balances(msg.sender);
        require(_value <= balanceOfSender);

        erc20Store.setBalance(msg.sender, balanceOfSender - _value);
        erc20Store.setTotalSupply(erc20Store.totalSupply() - _value);

        erc20Proxy.emitTransfer(msg.sender, address(0), _value);

        return true;
    }

    /** @notice  A function for a sender to issue multiple transfers to multiple
      * different addresses at once. This function is implemented for gas
      * considerations when someone wishes to transfer, as one transaction is
      * cheaper than issuing several distinct individual `transfer` transactions.
      *
      * @dev  By specifying a set of destination addresses and values, the
      * sender can issue one transaction to transfer multiple amounts to
      * distinct addresses, rather than issuing each as a separate
      * transaction. The `_tos` and `_values` arrays must be equal length, and
      * an index in one array corresponds to the same index in the other array
      * (e.g. `_tos[0]` will receive `_values[0]`, `_tos[1]` will receive
      * `_values[1]`, and so on.)
      * NOTE: transfers to the zero address are disallowed.
      *
      * @param  _tos  The destination addresses to receive the transfers.
      * @param  _values  The values for each destination address.
      * @return  success  If transfers succeeded.
      */
    function batchTransfer(address[] _tos, uint256[] _values) public returns (bool success) {
        require(_tos.length == _values.length);

        uint256 numTransfers = _tos.length;
        uint256 senderBalance = erc20Store.balances(msg.sender);

        for (uint256 i = 0; i < numTransfers; i++) {
          address to = _tos[i];
          require(to != address(0));
          uint256 v = _values[i];
          require(senderBalance >= v);

          if (msg.sender != to) {
            senderBalance -= v;
            erc20Store.addBalance(to, v);
          }
          erc20Proxy.emitTransfer(msg.sender, to, v);
        }

        erc20Store.setBalance(msg.sender, senderBalance);

        return true;
    }

    /** @notice  Enables the delegation of transfer control for many
      * accounts to the sweeper account, transferring any balances
      * as well to the given destination.
      *
      * @dev  An account delegates transfer control by signing the
      * value of `sweepMsg`. The sweeper account is the only authorized
      * caller of this function, so it must relay signatures on behalf
      * of accounts that delegate transfer control to it. Enabling
      * delegation is idempotent and permanent. If the account has a
      * balance at the time of enabling delegation, its balance is
      * also transfered to the given destination account `_to`.
      * NOTE: transfers to the zero address are disallowed.
      *
      * @param  _vs  The array of recovery byte components of the ECDSA signatures.
      * @param  _rs  The array of 'R' components of the ECDSA signatures.
      * @param  _ss  The array of 'S' components of the ECDSA signatures.
      * @param  _to  The destination for swept balances.
      */
    function enableSweep(uint8[] _vs, bytes32[] _rs, bytes32[] _ss, address _to) public onlySweeper {
        require(_to != address(0));
        require((_vs.length == _rs.length) && (_vs.length == _ss.length));

        uint256 numSignatures = _vs.length;
        uint256 sweptBalance = 0;

        for (uint256 i=0; i<numSignatures; ++i) {
          address from = ecrecover(sweepMsg, _vs[i], _rs[i], _ss[i]);

          // ecrecover returns 0 on malformed input
          if (from != address(0)) {
            sweptSet[from] = true;

            uint256 fromBalance = erc20Store.balances(from);

            if (fromBalance > 0) {
              sweptBalance += fromBalance;

              erc20Store.setBalance(from, 0);

              erc20Proxy.emitTransfer(from, _to, fromBalance);
            }
          }
        }

        if (sweptBalance > 0) {
          erc20Store.addBalance(_to, sweptBalance);
        }
    }

    /** @notice  For accounts that have delegated, transfer control
      * to the sweeper, this function transfers their balances to the given
      * destination.
      *
      * @dev The sweeper account is the only authorized caller of
      * this function. This function accepts an array of addresses to have their
      * balances transferred for gas efficiency purposes.
      * NOTE: any address for an account that has not been previously enabled
      * will be ignored.
      * NOTE: transfers to the zero address are disallowed.
      *
      * @param  _froms  The addresses to have their balances swept.
      * @param  _to  The destination address of all these transfers.
      */
    function replaySweep(address[] _froms, address _to) public onlySweeper {
        require(_to != address(0));
        uint256 lenFroms = _froms.length;
        uint256 sweptBalance = 0;

        for (uint256 i=0; i<lenFroms; ++i) {
            address from = _froms[i];

            if (sweptSet[from]) {
                uint256 fromBalance = erc20Store.balances(from);

                if (fromBalance > 0) {
                    sweptBalance += fromBalance;

                    erc20Store.setBalance(from, 0);

                    erc20Proxy.emitTransfer(from, _to, fromBalance);
                }
            }
        }

        if (sweptBalance > 0) {
            erc20Store.addBalance(_to, sweptBalance);
        }
    }

    /** @notice  Core logic of the ERC20 `transferFrom` function.
      *
      * @dev  This function can only be called by the referenced proxy,
      * which has a `transferFrom` function.
      * Every argument passed to that function as well as the original
      * `msg.sender` gets passed to this function.
      * NOTE: transfers to the zero address are disallowed.
      *
      * @param  _sender  The address initiating the transfer in proxy.
      */
    function transferFromWithSender(
        address _sender,
        address _from,
        address _to,
        uint256 _value
    )
        public
        onlyProxy
        returns (bool success)
    {
        require(_to != address(0)); // ensure burn is the cannonical transfer to 0x0

        uint256 balanceOfFrom = erc20Store.balances(_from);
        require(_value <= balanceOfFrom);

        uint256 senderAllowance = erc20Store.allowed(_from, _sender);
        require(_value <= senderAllowance);

        erc20Store.setBalance(_from, balanceOfFrom - _value);
        erc20Store.addBalance(_to, _value);

        erc20Store.setAllowance(_from, _sender, senderAllowance - _value);

        erc20Proxy.emitTransfer(_from, _to, _value);

        return true;
    }

    /** @notice  Core logic of the ERC20 `transfer` function.
      *
      * @dev  This function can only be called by the referenced proxy,
      * which has a `transfer` function.
      * Every argument passed to that function as well as the original
      * `msg.sender` gets passed to this function.
      * NOTE: transfers to the zero address are disallowed.
      *
      * @param  _sender  The address initiating the transfer in proxy.
      */
    function transferWithSender(
        address _sender,
        address _to,
        uint256 _value
    )
        public
        onlyProxy
        returns (bool success)
    {
        require(_to != address(0)); // ensure burn is the cannonical transfer to 0x0

        uint256 balanceOfSender = erc20Store.balances(_sender);
        require(_value <= balanceOfSender);

        erc20Store.setBalance(_sender, balanceOfSender - _value);
        erc20Store.addBalance(_to, _value);

        erc20Proxy.emitTransfer(_sender, _to, _value);

        return true;
    }

    // METHODS (ERC20 sub interface impl.)
    /// @notice  Core logic of the ERC20 `totalSupply` function.
    function totalSupply() public view returns (uint256) {
        return erc20Store.totalSupply();
    }

    /// @notice  Core logic of the ERC20 `balanceOf` function.
    function balanceOf(address _owner) public view returns (uint256 balance) {
        return erc20Store.balances(_owner);
    }

    /// @notice  Core logic of the ERC20 `allowance` function.
    function allowance(address _owner, address _spender) public view returns (uint256 remaining) {
        return erc20Store.allowed(_owner, _spender);
    }

    // EVENTS
    /// @dev  Emitted by successful `requestPrint` calls.
    event PrintingLocked(bytes32 _lockId, address _receiver, uint256 _value);
    /// @dev Emitted by successful `confirmPrint` calls.
    event PrintingConfirmed(bytes32 _lockId, address _receiver, uint256 _value);
}


/** @title  ERC20 compliant token balance store.
  *
  * @notice  This contract serves as the store of balances, allowances, and
  * supply for the ERC20 compliant token. No business logic exists here.
  *
  * @dev  This contract contains no business logic and instead
  * is the final destination for any change in balances, allowances, or token
  * supply. This contract is upgradeable in the sense that its custodian can
  * update the `erc20Impl` address, thus redirecting the source of logic that
  * determines how the balances will be updated.
  *
  * @author  Gemini Trust Company, LLC
  */
contract ERC20Store is ERC20ImplUpgradeable {

    // MEMBERS
    /// @dev  The total token supply.
    uint256 public totalSupply;

    /// @dev  The mapping of balances.
    mapping (address => uint256) public balances;

    /// @dev  The mapping of allowances.
    mapping (address => mapping (address => uint256)) public allowed;

    // CONSTRUCTOR
    function ERC20Store(address _custodian) ERC20ImplUpgradeable(_custodian) public {
        totalSupply = 0;
    }


    // PUBLIC FUNCTIONS
    // (ERC20 Ledger)

    /** @notice  The function to set the total supply of tokens.
      *
      * @dev  Intended for use by token implementation functions
      * that update the total supply. The only authorized caller
      * is the active implementation.
      *
      * @param _newTotalSupply the value to set as the new total supply
      */
    function setTotalSupply(
        uint256 _newTotalSupply
    )
        public
        onlyImpl
    {
        totalSupply = _newTotalSupply;
    }

    /** @notice  Sets how much `_owner` allows `_spender` to transfer on behalf
      * of `_owner`.
      *
      * @dev  Intended for use by token implementation functions
      * that update spending allowances. The only authorized caller
      * is the active implementation.
      *
      * @param  _owner  The account that will allow an on-behalf-of spend.
      * @param  _spender  The account that will spend on behalf of the owner.
      * @param  _value  The limit of what can be spent.
      */
    function setAllowance(
        address _owner,
        address _spender,
        uint256 _value
    )
        public
        onlyImpl
    {
        allowed[_owner][_spender] = _value;
    }

    /** @notice  Sets the balance of `_owner` to `_newBalance`.
      *
      * @dev  Intended for use by token implementation functions
      * that update balances. The only authorized caller
      * is the active implementation.
      *
      * @param  _owner  The account that will hold a new balance.
      * @param  _newBalance  The balance to set.
      */
    function setBalance(
        address _owner,
        uint256 _newBalance
    )
        public
        onlyImpl
    {
        balances[_owner] = _newBalance;
    }

    /** @notice Adds `_balanceIncrease` to `_owner`'s balance.
      *
      * @dev  Intended for use by token implementation functions
      * that update balances. The only authorized caller
      * is the active implementation.
      * WARNING: the caller is responsible for preventing overflow.
      *
      * @param  _owner  The account that will hold a new balance.
      * @param  _balanceIncrease  The balance to add.
      */
    function addBalance(
        address _owner,
        uint256 _balanceIncrease
    )
        public
        onlyImpl
    {
        balances[_owner] = balances[_owner] + _balanceIncrease;
    }
}


/** @title  A contact to govern hybrid control over increases to the token supply.
  *
  * @notice  A contract that acts as a custodian of the active token
  * implementation, and an intermediary between it and the ‘true’ custodian.
  * It preserves the functionality of direct custodianship as well as granting
  * limited control of token supply increases to an additional key.
  *
  * @dev  This contract is a layer of indirection between an instance of
  * ERC20Impl and a custodian. The functionality of the custodianship over
  * the token implementation is preserved (printing and custodian changes),
  * but this contract adds the ability for an additional key
  * (the 'limited printer') to increase the token supply up to a ceiling,
  * and this supply ceiling can only be raised by the custodian.
  *
  * @author  Gemini Trust Company, LLC
  */
contract PrintLimiter is LockRequestable {

    // TYPES
    /// @dev The struct type for pending ceiling raises.
    struct PendingCeilingRaise {
        uint256 raiseBy;
    }

    // MEMBERS
    /// @dev  The reference to the active token implementation.
    ERC20Impl public erc20Impl;

    /// @dev  The address of the account or contract that acts as the custodian.
    address public custodian;

    /** @dev  The sole authorized caller of limited printing.
      * This account is also authorized to lower the supply ceiling.
      */
    address public limitedPrinter;

    /** @dev  The maximum that the token supply can be increased to
      * through use of the limited printing feature.
      * The difference between the current total supply and the supply
      * ceiling is what is available to the 'limited printer' account.
      * The value of the ceiling can only be increased by the custodian.
      */
    uint256 public totalSupplyCeiling;

    /// @dev  The map of lock ids to pending ceiling raises.
    mapping (bytes32 => PendingCeilingRaise) public pendingRaiseMap;

    // CONSTRUCTOR
    function PrintLimiter(
        address _erc20Impl,
        address _custodian,
        address _limitedPrinter,
        uint256 _initialCeiling
    )
        public
    {
        erc20Impl = ERC20Impl(_erc20Impl);
        custodian = _custodian;
        limitedPrinter = _limitedPrinter;
        totalSupplyCeiling = _initialCeiling;
    }

    // MODIFIERS
    modifier onlyCustodian {
        require(msg.sender == custodian);
        _;
    }
    modifier onlyLimitedPrinter {
        require(msg.sender == limitedPrinter);
        _;
    }

    /** @notice  Increases the token supply, with the newly created tokens
      * being added to the balance of the specified account.
      *
      * @dev  The function checks that the value to print does not
      * exceed the supply ceiling when added to the current total supply.
      * NOTE: printing to the zero address is disallowed.
      *
      * @param  _receiver  The receiving address of the print.
      * @param  _value  The number of tokens to add to the total supply and the
      * balance of the receiving address.
      */
    function limitedPrint(address _receiver, uint256 _value) public onlyLimitedPrinter {
        uint256 totalSupply = erc20Impl.totalSupply();
        uint256 newTotalSupply = totalSupply + _value;

        require(newTotalSupply >= totalSupply);
        require(newTotalSupply <= totalSupplyCeiling);
        erc20Impl.confirmPrint(erc20Impl.requestPrint(_receiver, _value));
    }

    /** @notice  Requests an increase to the supply ceiling.
      *
      * @dev  Returns a unique lock id associated with the request.
      * Anyone can call this function, but confirming the request is authorized
      * by the custodian.
      *
      * @param  _raiseBy  The amount by which to raise the ceiling.
      *
      * @return  lockId  A unique identifier for this request.
      */
    function requestCeilingRaise(uint256 _raiseBy) public returns (bytes32 lockId) {
        require(_raiseBy != 0);

        lockId = generateLockId();

        pendingRaiseMap[lockId] = PendingCeilingRaise({
            raiseBy: _raiseBy
        });

        emit CeilingRaiseLocked(lockId, _raiseBy);
    }

    /** @notice  Confirms a pending increase in the token supply.
      *
      * @dev  When called by the custodian with a lock id associated with a
      * pending ceiling increase, the amount requested is added to the
      * current supply ceiling.
      * NOTE: this function will not execute any raise that would overflow the
      * supply ceiling, but it will not revert either.
      *
      * @param  _lockId  The identifier of a pending ceiling raise request.
      */
    function confirmCeilingRaise(bytes32 _lockId) public onlyCustodian {
        PendingCeilingRaise storage pendingRaise = pendingRaiseMap[_lockId];

        // copy locals of references to struct members
        uint256 raiseBy = pendingRaise.raiseBy;
        // accounts for a gibberish _lockId
        require(raiseBy != 0);

        delete pendingRaiseMap[_lockId];

        uint256 newCeiling = totalSupplyCeiling + raiseBy;
        // overflow check
        if (newCeiling >= totalSupplyCeiling) {
            totalSupplyCeiling = newCeiling;

            emit CeilingRaiseConfirmed(_lockId, raiseBy, newCeiling);
        }
    }

    /** @notice  Lowers the supply ceiling, further constraining the bound of
      * what can be printed by the limited printer.
      *
      * @dev  The limited printer is the sole authorized caller of this function,
      * so it is the only account that can elect to lower its limit to increase
      * the token supply.
      *
      * @param  _lowerBy  The amount by which to lower the supply ceiling.
      */
    function lowerCeiling(uint256 _lowerBy) public onlyLimitedPrinter {
        uint256 newCeiling = totalSupplyCeiling - _lowerBy;
        // overflow check
        require(newCeiling <= totalSupplyCeiling);
        totalSupplyCeiling = newCeiling;

        emit CeilingLowered(_lowerBy, newCeiling);
    }

    /** @notice  Pass-through control of print confirmation, allowing this
      * contract's custodian to act as the custodian of the associated
      * active token implementation.
      *
      * @dev  This contract is the direct custodian of the active token
      * implementation, but this function allows this contract's custodian
      * to act as though it were the direct custodian of the active
      * token implementation. Therefore the custodian retains control of
      * unlimited printing.
      *
      * @param  _lockId  The identifier of a pending print request in
      * the associated active token implementation.
      */
    function confirmPrintProxy(bytes32 _lockId) public onlyCustodian {
        erc20Impl.confirmPrint(_lockId);
    }

    /** @notice  Pass-through control of custodian change confirmation,
      * allowing this contract's custodian to act as the custodian of
      * the associated active token implementation.
      *
      * @dev  This contract is the direct custodian of the active token
      * implementation, but this function allows this contract's custodian
      * to act as though it were the direct custodian of the active
      * token implementation. Therefore the custodian retains control of
      * custodian changes.
      *
      * @param  _lockId  The identifier of a pending custodian change request
      * in the associated active token implementation.
      */
    function confirmCustodianChangeProxy(bytes32 _lockId) public onlyCustodian {
        erc20Impl.confirmCustodianChange(_lockId);
    }

    // EVENTS
    /// @dev  Emitted by successful `requestCeilingRaise` calls.
    event CeilingRaiseLocked(bytes32 _lockId, uint256 _raiseBy);
    /// @dev  Emitted by successful `confirmCeilingRaise` calls.
    event CeilingRaiseConfirmed(bytes32 _lockId, uint256 _raiseBy, uint256 _newCeiling);

    /// @dev  Emitted by successful `lowerCeiling` calls.
    event CeilingLowered(uint256 _lowerBy, uint256 _newCeiling);
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"constant":false,"inputs":[{"name":"_lockId","type":"bytes32"}],"name":"confirmCustodianChangeProxy","outputs":[],"payable":false,"stateMutability":"nonpayable","type":"function"},{"constant":false,"inputs":[{"name":"_lockId","type":"bytes32"}],"name":"confirmCeilingRaise","outputs":[],"payable":false,"stateMutability":"nonpayable","type":"function"},{"constant":true,"inputs":[{"name":"","type":"bytes32"}],"name":"pendingRaiseMap","outputs":[{"name":"raiseBy","type":"uint256"}],"payable":false,"stateMutability":"view","type":"function"},{"constant":false,"inputs":[{"name":"_lowerBy","type":"uint256"}],"name":"lowerCeiling","outputs":[],"payable":false,"stateMutability":"nonpayable","type":"function"},{"constant":true,"inputs":[],"name":"custodian","outputs":[{"name":"","type":"address"}],"payable":false,"stateMutability":"view","type":"function"},{"constant":true,"inputs":[],"name":"erc20Impl","outputs":[{"name":"","type":"address"}],"payable":false,"stateMutability":"view","type":"function"},{"constant":true,"inputs":[],"name":"limitedPrinter","outputs":[{"name":"","type":"address"}],"payable":false,"stateMutability":"view","type":"function"},{"constant":false,"inputs":[{"name":"_lockId","type":"bytes32"}],"name":"confirmPrintProxy","outputs":[],"payable":false,"stateMutability":"nonpayable","type":"function"},{"constant":true,"inputs":[],"name":"totalSupplyCeiling","outputs":[{"name":"","type":"uint256"}],"payable":false,"stateMutability":"view","type":"function"},{"constant":false,"inputs":[{"name":"_receiver","type":"address"},{"name":"_value","type":"uint256"}],"name":"limitedPrint","outputs":[],"payable":false,"stateMutability":"nonpayable","type":"function"},{"constant":false,"inputs":[{"name":"_raiseBy","type":"uint256"}],"name":"requestCeilingRaise","outputs":[{"name":"lockId","type":"bytes32"}],"payable":false,"stateMutability":"nonpayable","type":"function"},{"constant":true,"inputs":[],"name":"lockRequestCount","outputs":[{"name":"","type":"uint256"}],"payable":false,"stateMutability":"view","type":"function"},{"inputs":[{"name":"_erc20Impl","type":"address"},{"name":"_custodian","type":"address"},{"name":"_limitedPrinter","type":"address"},{"name":"_initialCeiling","type":"uint256"}],"payable":false,"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"name":"_lockId","type":"bytes32"},{"indexed":false,"name":"_raiseBy","type":"uint256"}],"name":"CeilingRaiseLocked","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"name":"_lockId","type":"bytes32"},{"indexed":false,"name":"_raiseBy","type":"uint256"},{"indexed":false,"name":"_newCeiling","type":"uint256"}],"name":"CeilingRaiseConfirmed","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"name":"_lowerBy","type":"uint256"},{"indexed":false,"name":"_newCeiling","type":"uint256"}],"name":"CeilingLowered","type":"event"}]

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

0000000000000000000000006704ba24b8640bccee6bf2fd276a6a1b8edf4ade0000000000000000000000001789cca7430aacbdb7c89f9b5695a9c06e4764eb000000000000000000000000d24400ae8bfebb18ca49be86258a3c749cf4685300000000000000000000000000000000000000000000000000000002540be400

-----Decoded View---------------
Arg [0] : _erc20Impl (address): 0x6704ba24b8640BCcEe6BF2fd276a6a1b8EdF4Ade
Arg [1] : _custodian (address): 0x1789CcA7430aAcbDB7c89F9B5695A9C06E4764Eb
Arg [2] : _limitedPrinter (address): 0xd24400ae8BfEBb18cA49Be86258a3C749cf46853
Arg [3] : _initialCeiling (uint256): 10000000000

-----Encoded View---------------
4 Constructor Arguments found :
Arg [0] : 0000000000000000000000006704ba24b8640bccee6bf2fd276a6a1b8edf4ade
Arg [1] : 0000000000000000000000001789cca7430aacbdb7c89f9b5695a9c06e4764eb
Arg [2] : 000000000000000000000000d24400ae8bfebb18ca49be86258a3c749cf46853
Arg [3] : 00000000000000000000000000000000000000000000000000000002540be400

bzzr://f02558155c0bc7b78c35a8fc0c21d3f69894565402e58f8565f615e1f78d5045