Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;
pragma experimental ABIEncoderV2;

import "./LiquidityBootstrappingPool.sol";

/**
 * @dev The original Liquidity Bootstrapping Pool computes accumulated swap fees from invariant growth, which
 * incorrectly assumes that the token weights do not change. This version is an exact copy of that flawed contract, with
 * a hotfix that hard-codes the protocol fee swap percentage to 0, ignoring the value stored in the Fee Collector.
 */
contract NoProtocolFeeLiquidityBootstrappingPool is LiquidityBootstrappingPool {
    constructor(
        IVault vault,
        string memory name,
        string memory symbol,
        IERC20[] memory tokens,
        uint256[] memory normalizedWeights,
        uint256 swapFeePercentage,
        uint256 pauseWindowDuration,
        uint256 bufferPeriodDuration,
        address owner,
        bool swapEnabledOnStart
    )
        LiquidityBootstrappingPool(
            vault,
            name,
            symbol,
            tokens,
            normalizedWeights,
            swapFeePercentage,
            pauseWindowDuration,
            bufferPeriodDuration,
            owner,
            swapEnabledOnStart
        )
    {
        // solhint-disable-previous-line no-empty-blocks
    }

    function onJoinPool(
        bytes32 poolId,
        address sender,
        address recipient,
        uint256[] memory balances,
        uint256 lastChangeBlock,
        uint256,
        bytes memory userData
    ) public virtual override returns (uint256[] memory, uint256[] memory) {
        return super.onJoinPool(poolId, sender, recipient, balances, lastChangeBlock, 0, userData);
    }

    function onExitPool(
        bytes32 poolId,
        address sender,
        address recipient,
        uint256[] memory balances,
        uint256 lastChangeBlock,
        uint256,
        bytes memory userData
    ) public virtual override returns (uint256[] memory, uint256[] memory) {
        return super.onExitPool(poolId, sender, recipient, balances, lastChangeBlock, 0, userData);
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;
pragma experimental ABIEncoderV2;

import "@balancer-labs/v2-solidity-utils/contracts/math/FixedPoint.sol";
import "@balancer-labs/v2-solidity-utils/contracts/helpers/InputHelpers.sol";

import "@balancer-labs/v2-pool-utils/contracts/BaseMinimalSwapInfoPool.sol";

import "./WeightedMath.sol";
import "./WeightedPoolUserDataHelpers.sol";

/**
 * @dev Base class for WeightedPools containing swap, join and exit logic, but leaving storage and management of
 * the weights to subclasses. Derived contracts can choose to make weights immutable, mutable, or even dynamic
 *  based on local or external logic.
 */
abstract contract BaseWeightedPool is BaseMinimalSwapInfoPool, WeightedMath {
    using FixedPoint for uint256;
    using WeightedPoolUserDataHelpers for bytes;

    uint256 private _lastInvariant;

    enum JoinKind { INIT, EXACT_TOKENS_IN_FOR_BPT_OUT, TOKEN_IN_FOR_EXACT_BPT_OUT }
    enum ExitKind { EXACT_BPT_IN_FOR_ONE_TOKEN_OUT, EXACT_BPT_IN_FOR_TOKENS_OUT, BPT_IN_FOR_EXACT_TOKENS_OUT }

    constructor(
        IVault vault,
        string memory name,
        string memory symbol,
        IERC20[] memory tokens,
        address[] memory assetManagers,
        uint256 swapFeePercentage,
        uint256 pauseWindowDuration,
        uint256 bufferPeriodDuration,
        address owner
    )
        BasePool(
            vault,
            // Given BaseMinimalSwapInfoPool supports both of these specializations, and this Pool never registers or
            // deregisters any tokens after construction, picking Two Token when the Pool only has two tokens is free
            // gas savings.
            tokens.length == 2 ? IVault.PoolSpecialization.TWO_TOKEN : IVault.PoolSpecialization.MINIMAL_SWAP_INFO,
            name,
            symbol,
            tokens,
            assetManagers,
            swapFeePercentage,
            pauseWindowDuration,
            bufferPeriodDuration,
            owner
        )
    {
        // solhint-disable-previous-line no-empty-blocks
    }

    // Virtual functions

    /**
     * @dev Returns the normalized weight of `token`. Weights are fixed point numbers that sum to FixedPoint.ONE.
     */
    function _getNormalizedWeight(IERC20 token) internal view virtual returns (uint256);

    /**
     * @dev Returns all normalized weights, in the same order as the Pool's tokens.
     */
    function _getNormalizedWeights() internal view virtual returns (uint256[] memory);

    /**
     * @dev Returns all normalized weights, in the same order as the Pool's tokens, along with the index of the token
     * with the highest weight.
     */
    function _getNormalizedWeightsAndMaxWeightIndex() internal view virtual returns (uint256[] memory, uint256);

    function getLastInvariant() external view returns (uint256) {
        return _lastInvariant;
    }

    /**
     * @dev Returns the current value of the invariant.
     */
    function getInvariant() public view returns (uint256) {
        (, uint256[] memory balances, ) = getVault().getPoolTokens(getPoolId());

        // Since the Pool hooks always work with upscaled balances, we manually
        // upscale here for consistency
        _upscaleArray(balances, _scalingFactors());

        (uint256[] memory normalizedWeights, ) = _getNormalizedWeightsAndMaxWeightIndex();
        return WeightedMath._calculateInvariant(normalizedWeights, balances);
    }

    function getNormalizedWeights() external view returns (uint256[] memory) {
        return _getNormalizedWeights();
    }

    // Base Pool handlers

    // Swap

    function _onSwapGivenIn(
        SwapRequest memory swapRequest,
        uint256 currentBalanceTokenIn,
        uint256 currentBalanceTokenOut
    ) internal view virtual override whenNotPaused returns (uint256) {
        // Swaps are disabled while the contract is paused.

        return
            WeightedMath._calcOutGivenIn(
                currentBalanceTokenIn,
                _getNormalizedWeight(swapRequest.tokenIn),
                currentBalanceTokenOut,
                _getNormalizedWeight(swapRequest.tokenOut),
                swapRequest.amount
            );
    }

    function _onSwapGivenOut(
        SwapRequest memory swapRequest,
        uint256 currentBalanceTokenIn,
        uint256 currentBalanceTokenOut
    ) internal view virtual override whenNotPaused returns (uint256) {
        // Swaps are disabled while the contract is paused.

        return
            WeightedMath._calcInGivenOut(
                currentBalanceTokenIn,
                _getNormalizedWeight(swapRequest.tokenIn),
                currentBalanceTokenOut,
                _getNormalizedWeight(swapRequest.tokenOut),
                swapRequest.amount
            );
    }

    // Initialize

    function _onInitializePool(
        bytes32,
        address,
        address,
        uint256[] memory scalingFactors,
        bytes memory userData
    ) internal virtual override whenNotPaused returns (uint256, uint256[] memory) {
        // It would be strange for the Pool to be paused before it is initialized, but for consistency we prevent
        // initialization in this case.

        JoinKind kind = userData.joinKind();
        _require(kind == JoinKind.INIT, Errors.UNINITIALIZED);

        uint256[] memory amountsIn = userData.initialAmountsIn();
        InputHelpers.ensureInputLengthMatch(_getTotalTokens(), amountsIn.length);
        _upscaleArray(amountsIn, scalingFactors);

        (uint256[] memory normalizedWeights, ) = _getNormalizedWeightsAndMaxWeightIndex();

        uint256 invariantAfterJoin = WeightedMath._calculateInvariant(normalizedWeights, amountsIn);

        // Set the initial BPT to the value of the invariant times the number of tokens. This makes BPT supply more
        // consistent in Pools with similar compositions but different number of tokens.
        uint256 bptAmountOut = Math.mul(invariantAfterJoin, _getTotalTokens());

        _lastInvariant = invariantAfterJoin;

        return (bptAmountOut, amountsIn);
    }

    // Join

    function _onJoinPool(
        bytes32,
        address,
        address,
        uint256[] memory balances,
        uint256,
        uint256 protocolSwapFeePercentage,
        uint256[] memory scalingFactors,
        bytes memory userData
    )
        internal
        virtual
        override
        whenNotPaused
        returns (
            uint256,
            uint256[] memory,
            uint256[] memory
        )
    {
        // All joins are disabled while the contract is paused.

        (uint256[] memory normalizedWeights, uint256 maxWeightTokenIndex) = _getNormalizedWeightsAndMaxWeightIndex();

        // Due protocol swap fee amounts are computed by measuring the growth of the invariant between the previous join
        // or exit event and now - the invariant's growth is due exclusively to swap fees. This avoids spending gas
        // computing them on each individual swap
        uint256 invariantBeforeJoin = WeightedMath._calculateInvariant(normalizedWeights, balances);

        uint256[] memory dueProtocolFeeAmounts = _getDueProtocolFeeAmounts(
            balances,
            normalizedWeights,
            maxWeightTokenIndex,
            _lastInvariant,
            invariantBeforeJoin,
            protocolSwapFeePercentage
        );

        // Update current balances by subtracting the protocol fee amounts
        _mutateAmounts(balances, dueProtocolFeeAmounts, FixedPoint.sub);
        (uint256 bptAmountOut, uint256[] memory amountsIn) = _doJoin(
            balances,
            normalizedWeights,
            scalingFactors,
            userData
        );

        // Update the invariant with the balances the Pool will have after the join, in order to compute the
        // protocol swap fee amounts due in future joins and exits.
        _lastInvariant = _invariantAfterJoin(balances, amountsIn, normalizedWeights);

        return (bptAmountOut, amountsIn, dueProtocolFeeAmounts);
    }

    function _doJoin(
        uint256[] memory balances,
        uint256[] memory normalizedWeights,
        uint256[] memory scalingFactors,
        bytes memory userData
    ) private view returns (uint256, uint256[] memory) {
        JoinKind kind = userData.joinKind();

        if (kind == JoinKind.EXACT_TOKENS_IN_FOR_BPT_OUT) {
            return _joinExactTokensInForBPTOut(balances, normalizedWeights, scalingFactors, userData);
        } else if (kind == JoinKind.TOKEN_IN_FOR_EXACT_BPT_OUT) {
            return _joinTokenInForExactBPTOut(balances, normalizedWeights, userData);
        } else {
            _revert(Errors.UNHANDLED_JOIN_KIND);
        }
    }

    function _joinExactTokensInForBPTOut(
        uint256[] memory balances,
        uint256[] memory normalizedWeights,
        uint256[] memory scalingFactors,
        bytes memory userData
    ) private view returns (uint256, uint256[] memory) {
        (uint256[] memory amountsIn, uint256 minBPTAmountOut) = userData.exactTokensInForBptOut();
        InputHelpers.ensureInputLengthMatch(_getTotalTokens(), amountsIn.length);

        _upscaleArray(amountsIn, scalingFactors);

        uint256 bptAmountOut = WeightedMath._calcBptOutGivenExactTokensIn(
            balances,
            normalizedWeights,
            amountsIn,
            totalSupply(),
            getSwapFeePercentage()
        );

        _require(bptAmountOut >= minBPTAmountOut, Errors.BPT_OUT_MIN_AMOUNT);

        return (bptAmountOut, amountsIn);
    }

    function _joinTokenInForExactBPTOut(
        uint256[] memory balances,
        uint256[] memory normalizedWeights,
        bytes memory userData
    ) private view returns (uint256, uint256[] memory) {
        (uint256 bptAmountOut, uint256 tokenIndex) = userData.tokenInForExactBptOut();
        // Note that there is no maximum amountIn parameter: this is handled by `IVault.joinPool`.

        _require(tokenIndex < _getTotalTokens(), Errors.OUT_OF_BOUNDS);

        uint256[] memory amountsIn = new uint256[](_getTotalTokens());
        amountsIn[tokenIndex] = WeightedMath._calcTokenInGivenExactBptOut(
            balances[tokenIndex],
            normalizedWeights[tokenIndex],
            bptAmountOut,
            totalSupply(),
            getSwapFeePercentage()
        );

        return (bptAmountOut, amountsIn);
    }

    // Exit

    function _onExitPool(
        bytes32,
        address,
        address,
        uint256[] memory balances,
        uint256,
        uint256 protocolSwapFeePercentage,
        uint256[] memory scalingFactors,
        bytes memory userData
    )
        internal
        virtual
        override
        returns (
            uint256 bptAmountIn,
            uint256[] memory amountsOut,
            uint256[] memory dueProtocolFeeAmounts
        )
    {
        (uint256[] memory normalizedWeights, uint256 maxWeightTokenIndex) = _getNormalizedWeightsAndMaxWeightIndex();

        // Exits are not completely disabled while the contract is paused: proportional exits (exact BPT in for tokens
        // out) remain functional.

        if (_isNotPaused()) {
            // Due protocol swap fee amounts are computed by measuring the growth of the invariant between the previous
            // join or exit event and now - the invariant's growth is due exclusively to swap fees. This avoids
            // spending gas calculating the fees on each individual swap.
            uint256 invariantBeforeExit = WeightedMath._calculateInvariant(normalizedWeights, balances);
            dueProtocolFeeAmounts = _getDueProtocolFeeAmounts(
                balances,
                normalizedWeights,
                maxWeightTokenIndex,
                _lastInvariant,
                invariantBeforeExit,
                protocolSwapFeePercentage
            );

            // Update current balances by subtracting the protocol fee amounts
            _mutateAmounts(balances, dueProtocolFeeAmounts, FixedPoint.sub);
        } else {
            // If the contract is paused, swap protocol fee amounts are not charged to avoid extra calculations and
            // reduce the potential for errors.
            dueProtocolFeeAmounts = new uint256[](_getTotalTokens());
        }

        (bptAmountIn, amountsOut) = _doExit(balances, normalizedWeights, scalingFactors, userData);

        // Update the invariant with the balances the Pool will have after the exit, in order to compute the
        // protocol swap fees due in future joins and exits.
        _lastInvariant = _invariantAfterExit(balances, amountsOut, normalizedWeights);

        return (bptAmountIn, amountsOut, dueProtocolFeeAmounts);
    }

    function _doExit(
        uint256[] memory balances,
        uint256[] memory normalizedWeights,
        uint256[] memory scalingFactors,
        bytes memory userData
    ) private view returns (uint256, uint256[] memory) {
        ExitKind kind = userData.exitKind();

        if (kind == ExitKind.EXACT_BPT_IN_FOR_ONE_TOKEN_OUT) {
            return _exitExactBPTInForTokenOut(balances, normalizedWeights, userData);
        } else if (kind == ExitKind.EXACT_BPT_IN_FOR_TOKENS_OUT) {
            return _exitExactBPTInForTokensOut(balances, userData);
        } else {
            // ExitKind.BPT_IN_FOR_EXACT_TOKENS_OUT
            return _exitBPTInForExactTokensOut(balances, normalizedWeights, scalingFactors, userData);
        }
    }

    function _exitExactBPTInForTokenOut(
        uint256[] memory balances,
        uint256[] memory normalizedWeights,
        bytes memory userData
    ) private view whenNotPaused returns (uint256, uint256[] memory) {
        // This exit function is disabled if the contract is paused.

        (uint256 bptAmountIn, uint256 tokenIndex) = userData.exactBptInForTokenOut();
        // Note that there is no minimum amountOut parameter: this is handled by `IVault.exitPool`.

        _require(tokenIndex < _getTotalTokens(), Errors.OUT_OF_BOUNDS);

        // We exit in a single token, so we initialize amountsOut with zeros
        uint256[] memory amountsOut = new uint256[](_getTotalTokens());

        // And then assign the result to the selected token
        amountsOut[tokenIndex] = WeightedMath._calcTokenOutGivenExactBptIn(
            balances[tokenIndex],
            normalizedWeights[tokenIndex],
            bptAmountIn,
            totalSupply(),
            getSwapFeePercentage()
        );

        return (bptAmountIn, amountsOut);
    }

    function _exitExactBPTInForTokensOut(uint256[] memory balances, bytes memory userData)
        private
        view
        returns (uint256, uint256[] memory)
    {
        // This exit function is the only one that is not disabled if the contract is paused: it remains unrestricted
        // in an attempt to provide users with a mechanism to retrieve their tokens in case of an emergency.
        // This particular exit function is the only one that remains available because it is the simplest one, and
        // therefore the one with the lowest likelihood of errors.

        uint256 bptAmountIn = userData.exactBptInForTokensOut();
        // Note that there is no minimum amountOut parameter: this is handled by `IVault.exitPool`.

        uint256[] memory amountsOut = WeightedMath._calcTokensOutGivenExactBptIn(balances, bptAmountIn, totalSupply());
        return (bptAmountIn, amountsOut);
    }

    function _exitBPTInForExactTokensOut(
        uint256[] memory balances,
        uint256[] memory normalizedWeights,
        uint256[] memory scalingFactors,
        bytes memory userData
    ) private view whenNotPaused returns (uint256, uint256[] memory) {
        // This exit function is disabled if the contract is paused.

        (uint256[] memory amountsOut, uint256 maxBPTAmountIn) = userData.bptInForExactTokensOut();
        InputHelpers.ensureInputLengthMatch(amountsOut.length, _getTotalTokens());
        _upscaleArray(amountsOut, scalingFactors);

        uint256 bptAmountIn = WeightedMath._calcBptInGivenExactTokensOut(
            balances,
            normalizedWeights,
            amountsOut,
            totalSupply(),
            getSwapFeePercentage()
        );
        _require(bptAmountIn <= maxBPTAmountIn, Errors.BPT_IN_MAX_AMOUNT);

        return (bptAmountIn, amountsOut);
    }

    // Helpers

    function _getDueProtocolFeeAmounts(
        uint256[] memory balances,
        uint256[] memory normalizedWeights,
        uint256 maxWeightTokenIndex,
        uint256 previousInvariant,
        uint256 currentInvariant,
        uint256 protocolSwapFeePercentage
    ) private view returns (uint256[] memory) {
        // Initialize with zeros
        uint256[] memory dueProtocolFeeAmounts = new uint256[](_getTotalTokens());

        // Early return if the protocol swap fee percentage is zero, saving gas.
        if (protocolSwapFeePercentage == 0) {
            return dueProtocolFeeAmounts;
        }

        // The protocol swap fees are always paid using the token with the largest weight in the Pool. As this is the
        // token that is expected to have the largest balance, using it to pay fees should not unbalance the Pool.
        dueProtocolFeeAmounts[maxWeightTokenIndex] = WeightedMath._calcDueTokenProtocolSwapFeeAmount(
            balances[maxWeightTokenIndex],
            normalizedWeights[maxWeightTokenIndex],
            previousInvariant,
            currentInvariant,
            protocolSwapFeePercentage
        );

        return dueProtocolFeeAmounts;
    }

    /**
     * @dev Returns the value of the invariant given `balances`, assuming they are increased by `amountsIn`. All
     * amounts are expected to be upscaled.
     */
    function _invariantAfterJoin(
        uint256[] memory balances,
        uint256[] memory amountsIn,
        uint256[] memory normalizedWeights
    ) private view returns (uint256) {
        _mutateAmounts(balances, amountsIn, FixedPoint.add);
        return WeightedMath._calculateInvariant(normalizedWeights, balances);
    }

    function _invariantAfterExit(
        uint256[] memory balances,
        uint256[] memory amountsOut,
        uint256[] memory normalizedWeights
    ) private view returns (uint256) {
        _mutateAmounts(balances, amountsOut, FixedPoint.sub);
        return WeightedMath._calculateInvariant(normalizedWeights, balances);
    }

    /**
     * @dev Mutates `amounts` by applying `mutation` with each entry in `arguments`.
     *
     * Equivalent to `amounts = amounts.map(mutation)`.
     */
    function _mutateAmounts(
        uint256[] memory toMutate,
        uint256[] memory arguments,
        function(uint256, uint256) pure returns (uint256) mutation
    ) private view {
        for (uint256 i = 0; i < _getTotalTokens(); ++i) {
            toMutate[i] = mutation(toMutate[i], arguments[i]);
        }
    }

    /**
     * @dev This function returns the appreciation of one BPT relative to the
     * underlying tokens. This starts at 1 when the pool is created and grows over time
     */
    function getRate() public view returns (uint256) {
        // The initial BPT supply is equal to the invariant times the number of tokens.
        return Math.mul(getInvariant(), _getTotalTokens()).divDown(totalSupply());
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;

import "./LogExpMath.sol";
import "../helpers/BalancerErrors.sol";

/* solhint-disable private-vars-leading-underscore */

library FixedPoint {
    uint256 internal constant ONE = 1e18; // 18 decimal places
    uint256 internal constant MAX_POW_RELATIVE_ERROR = 10000; // 10^(-14)

    // Minimum base for the power function when the exponent is 'free' (larger than ONE).
    uint256 internal constant MIN_POW_BASE_FREE_EXPONENT = 0.7e18;

    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        // Fixed Point addition is the same as regular checked addition

        uint256 c = a + b;
        _require(c >= a, Errors.ADD_OVERFLOW);
        return c;
    }

    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        // Fixed Point addition is the same as regular checked addition

        _require(b <= a, Errors.SUB_OVERFLOW);
        uint256 c = a - b;
        return c;
    }

    function mulDown(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 product = a * b;
        _require(a == 0 || product / a == b, Errors.MUL_OVERFLOW);

        return product / ONE;
    }

    function mulUp(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 product = a * b;
        _require(a == 0 || product / a == b, Errors.MUL_OVERFLOW);

        if (product == 0) {
            return 0;
        } else {
            // The traditional divUp formula is:
            // divUp(x, y) := (x + y - 1) / y
            // To avoid intermediate overflow in the addition, we distribute the division and get:
            // divUp(x, y) := (x - 1) / y + 1
            // Note that this requires x != 0, which we already tested for.

            return ((product - 1) / ONE) + 1;
        }
    }

    function divDown(uint256 a, uint256 b) internal pure returns (uint256) {
        _require(b != 0, Errors.ZERO_DIVISION);

        if (a == 0) {
            return 0;
        } else {
            uint256 aInflated = a * ONE;
            _require(aInflated / a == ONE, Errors.DIV_INTERNAL); // mul overflow

            return aInflated / b;
        }
    }

    function divUp(uint256 a, uint256 b) internal pure returns (uint256) {
        _require(b != 0, Errors.ZERO_DIVISION);

        if (a == 0) {
            return 0;
        } else {
            uint256 aInflated = a * ONE;
            _require(aInflated / a == ONE, Errors.DIV_INTERNAL); // mul overflow

            // The traditional divUp formula is:
            // divUp(x, y) := (x + y - 1) / y
            // To avoid intermediate overflow in the addition, we distribute the division and get:
            // divUp(x, y) := (x - 1) / y + 1
            // Note that this requires x != 0, which we already tested for.

            return ((aInflated - 1) / b) + 1;
        }
    }

    /**
     * @dev Returns x^y, assuming both are fixed point numbers, rounding down. The result is guaranteed to not be above
     * the true value (that is, the error function expected - actual is always positive).
     */
    function powDown(uint256 x, uint256 y) internal pure returns (uint256) {
        uint256 raw = LogExpMath.pow(x, y);
        uint256 maxError = add(mulUp(raw, MAX_POW_RELATIVE_ERROR), 1);

        if (raw < maxError) {
            return 0;
        } else {
            return sub(raw, maxError);
        }
    }

    /**
     * @dev Returns x^y, assuming both are fixed point numbers, rounding up. The result is guaranteed to not be below
     * the true value (that is, the error function expected - actual is always negative).
     */
    function powUp(uint256 x, uint256 y) internal pure returns (uint256) {
        uint256 raw = LogExpMath.pow(x, y);
        uint256 maxError = add(mulUp(raw, MAX_POW_RELATIVE_ERROR), 1);

        return add(raw, maxError);
    }

    /**
     * @dev Returns the complement of a value (1 - x), capped to 0 if x is larger than 1.
     *
     * Useful when computing the complement for values with some level of relative error, as it strips this error and
     * prevents intermediate negative values.
     */
    function complement(uint256 x) internal pure returns (uint256) {
        return (x < ONE) ? (ONE - x) : 0;
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;

import "../openzeppelin/IERC20.sol";

import "./BalancerErrors.sol";

library InputHelpers {
    function ensureInputLengthMatch(uint256 a, uint256 b) internal pure {
        _require(a == b, Errors.INPUT_LENGTH_MISMATCH);
    }

    function ensureInputLengthMatch(
        uint256 a,
        uint256 b,
        uint256 c
    ) internal pure {
        _require(a == b && b == c, Errors.INPUT_LENGTH_MISMATCH);
    }

    function ensureArrayIsSorted(IERC20[] memory array) internal pure {
        address[] memory addressArray;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            addressArray := array
        }
        ensureArrayIsSorted(addressArray);
    }

    function ensureArrayIsSorted(address[] memory array) internal pure {
        if (array.length < 2) {
            return;
        }

        address previous = array[0];
        for (uint256 i = 1; i < array.length; ++i) {
            address current = array[i];
            _require(previous < current, Errors.UNSORTED_ARRAY);
            previous = current;
        }
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;
pragma experimental ABIEncoderV2;

import "./BasePool.sol";
import "@balancer-labs/v2-vault/contracts/interfaces/IMinimalSwapInfoPool.sol";

/**
 * @dev Extension of `BasePool`, adding a handler for `IMinimalSwapInfoPool.onSwap`.
 *
 * Derived contracts must call `BasePool`'s constructor, and implement `_onSwapGivenIn` and `_onSwapGivenOut` along with
 * `BasePool`'s virtual functions. Inheriting from this contract lets derived contracts choose the Two Token or Minimal
 * Swap Info specialization settings.
 */
abstract contract BaseMinimalSwapInfoPool is IMinimalSwapInfoPool, BasePool {
    // Swap Hooks

    function onSwap(
        SwapRequest memory request,
        uint256 balanceTokenIn,
        uint256 balanceTokenOut
    ) public virtual override returns (uint256) {
        uint256 scalingFactorTokenIn = _scalingFactor(request.tokenIn);
        uint256 scalingFactorTokenOut = _scalingFactor(request.tokenOut);

        if (request.kind == IVault.SwapKind.GIVEN_IN) {
            // Fees are subtracted before scaling, to reduce the complexity of the rounding direction analysis.
            request.amount = _subtractSwapFeeAmount(request.amount);

            // All token amounts are upscaled.
            balanceTokenIn = _upscale(balanceTokenIn, scalingFactorTokenIn);
            balanceTokenOut = _upscale(balanceTokenOut, scalingFactorTokenOut);
            request.amount = _upscale(request.amount, scalingFactorTokenIn);

            uint256 amountOut = _onSwapGivenIn(request, balanceTokenIn, balanceTokenOut);

            // amountOut tokens are exiting the Pool, so we round down.
            return _downscaleDown(amountOut, scalingFactorTokenOut);
        } else {
            // All token amounts are upscaled.
            balanceTokenIn = _upscale(balanceTokenIn, scalingFactorTokenIn);
            balanceTokenOut = _upscale(balanceTokenOut, scalingFactorTokenOut);
            request.amount = _upscale(request.amount, scalingFactorTokenOut);

            uint256 amountIn = _onSwapGivenOut(request, balanceTokenIn, balanceTokenOut);

            // amountIn tokens are entering the Pool, so we round up.
            amountIn = _downscaleUp(amountIn, scalingFactorTokenIn);

            // Fees are added after scaling happens, to reduce the complexity of the rounding direction analysis.
            return _addSwapFeeAmount(amountIn);
        }
    }

    /*
     * @dev Called when a swap with the Pool occurs, where the amount of tokens entering the Pool is known.
     *
     * Returns the amount of tokens that will be taken from the Pool in return.
     *
     * All amounts inside `swapRequest`, `balanceTokenIn` and `balanceTokenOut` are upscaled. The swap fee has already
     * been deducted from `swapRequest.amount`.
     *
     * The return value is also considered upscaled, and will be downscaled (rounding down) before returning it to the
     * Vault.
     */
    function _onSwapGivenIn(
        SwapRequest memory swapRequest,
        uint256 balanceTokenIn,
        uint256 balanceTokenOut
    ) internal virtual returns (uint256);

    /*
     * @dev Called when a swap with the Pool occurs, where the amount of tokens exiting the Pool is known.
     *
     * Returns the amount of tokens that will be granted to the Pool in return.
     *
     * All amounts inside `swapRequest`, `balanceTokenIn` and `balanceTokenOut` are upscaled.
     *
     * The return value is also considered upscaled, and will be downscaled (rounding up) before applying the swap fee
     * and returning it to the Vault.
     */
    function _onSwapGivenOut(
        SwapRequest memory swapRequest,
        uint256 balanceTokenIn,
        uint256 balanceTokenOut
    ) internal virtual returns (uint256);
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;

import "@balancer-labs/v2-solidity-utils/contracts/math/FixedPoint.sol";
import "@balancer-labs/v2-solidity-utils/contracts/math/Math.sol";
import "@balancer-labs/v2-solidity-utils/contracts/helpers/InputHelpers.sol";

/* solhint-disable private-vars-leading-underscore */

contract WeightedMath {
    using FixedPoint for uint256;
    // A minimum normalized weight imposes a maximum weight ratio. We need this due to limitations in the
    // implementation of the power function, as these ratios are often exponents.
    uint256 internal constant _MIN_WEIGHT = 0.01e18;
    // Having a minimum normalized weight imposes a limit on the maximum number of tokens;
    // i.e., the largest possible pool is one where all tokens have exactly the minimum weight.
    uint256 internal constant _MAX_WEIGHTED_TOKENS = 100;

    // Pool limits that arise from limitations in the fixed point power function (and the imposed 1:100 maximum weight
    // ratio).

    // Swap limits: amounts swapped may not be larger than this percentage of total balance.
    uint256 internal constant _MAX_IN_RATIO = 0.3e18;
    uint256 internal constant _MAX_OUT_RATIO = 0.3e18;

    // Invariant growth limit: non-proportional joins cannot cause the invariant to increase by more than this ratio.
    uint256 internal constant _MAX_INVARIANT_RATIO = 3e18;
    // Invariant shrink limit: non-proportional exits cannot cause the invariant to decrease by less than this ratio.
    uint256 internal constant _MIN_INVARIANT_RATIO = 0.7e18;

    // Invariant is used to collect protocol swap fees by comparing its value between two times.
    // So we can round always to the same direction. It is also used to initiate the BPT amount
    // and, because there is a minimum BPT, we round down the invariant.
    function _calculateInvariant(uint256[] memory normalizedWeights, uint256[] memory balances)
        internal
        pure
        returns (uint256 invariant)
    {
        /**********************************************************************************************
        // invariant               _____                                                             //
        // wi = weight index i      | |      wi                                                      //
        // bi = balance index i     | |  bi ^   = i                                                  //
        // i = invariant                                                                             //
        **********************************************************************************************/

        invariant = FixedPoint.ONE;
        for (uint256 i = 0; i < normalizedWeights.length; i++) {
            invariant = invariant.mulDown(balances[i].powDown(normalizedWeights[i]));
        }

        _require(invariant > 0, Errors.ZERO_INVARIANT);
    }

    // Computes how many tokens can be taken out of a pool if `amountIn` are sent, given the
    // current balances and weights.
    function _calcOutGivenIn(
        uint256 balanceIn,
        uint256 weightIn,
        uint256 balanceOut,
        uint256 weightOut,
        uint256 amountIn
    ) internal pure returns (uint256) {
        /**********************************************************************************************
        // outGivenIn                                                                                //
        // aO = amountOut                                                                            //
        // bO = balanceOut                                                                           //
        // bI = balanceIn              /      /            bI             \    (wI / wO) \           //
        // aI = amountIn    aO = bO * |  1 - | --------------------------  | ^            |          //
        // wI = weightIn               \      \       ( bI + aI )         /              /           //
        // wO = weightOut                                                                            //
        **********************************************************************************************/

        // Amount out, so we round down overall.

        // The multiplication rounds down, and the subtrahend (power) rounds up (so the base rounds up too).
        // Because bI / (bI + aI) <= 1, the exponent rounds down.

        // Cannot exceed maximum in ratio
        _require(amountIn <= balanceIn.mulDown(_MAX_IN_RATIO), Errors.MAX_IN_RATIO);

        uint256 denominator = balanceIn.add(amountIn);
        uint256 base = balanceIn.divUp(denominator);
        uint256 exponent = weightIn.divDown(weightOut);
        uint256 power = base.powUp(exponent);

        return balanceOut.mulDown(power.complement());
    }

    // Computes how many tokens must be sent to a pool in order to take `amountOut`, given the
    // current balances and weights.
    function _calcInGivenOut(
        uint256 balanceIn,
        uint256 weightIn,
        uint256 balanceOut,
        uint256 weightOut,
        uint256 amountOut
    ) internal pure returns (uint256) {
        /**********************************************************************************************
        // inGivenOut                                                                                //
        // aO = amountOut                                                                            //
        // bO = balanceOut                                                                           //
        // bI = balanceIn              /  /            bO             \    (wO / wI)      \          //
        // aI = amountIn    aI = bI * |  | --------------------------  | ^            - 1  |         //
        // wI = weightIn               \  \       ( bO - aO )         /                   /          //
        // wO = weightOut                                                                            //
        **********************************************************************************************/

        // Amount in, so we round up overall.

        // The multiplication rounds up, and the power rounds up (so the base rounds up too).
        // Because b0 / (b0 - a0) >= 1, the exponent rounds up.

        // Cannot exceed maximum out ratio
        _require(amountOut <= balanceOut.mulDown(_MAX_OUT_RATIO), Errors.MAX_OUT_RATIO);

        uint256 base = balanceOut.divUp(balanceOut.sub(amountOut));
        uint256 exponent = weightOut.divUp(weightIn);
        uint256 power = base.powUp(exponent);

        // Because the base is larger than one (and the power rounds up), the power should always be larger than one, so
        // the following subtraction should never revert.
        uint256 ratio = power.sub(FixedPoint.ONE);

        return balanceIn.mulUp(ratio);
    }

    function _calcBptOutGivenExactTokensIn(
        uint256[] memory balances,
        uint256[] memory normalizedWeights,
        uint256[] memory amountsIn,
        uint256 bptTotalSupply,
        uint256 swapFeePercentage
    ) internal pure returns (uint256) {
        // BPT out, so we round down overall.

        uint256[] memory balanceRatiosWithFee = new uint256[](amountsIn.length);

        uint256 invariantRatioWithFees = 0;
        for (uint256 i = 0; i < balances.length; i++) {
            balanceRatiosWithFee[i] = balances[i].add(amountsIn[i]).divDown(balances[i]);
            invariantRatioWithFees = invariantRatioWithFees.add(balanceRatiosWithFee[i].mulDown(normalizedWeights[i]));
        }

        uint256 invariantRatio = FixedPoint.ONE;
        for (uint256 i = 0; i < balances.length; i++) {
            uint256 amountInWithoutFee;

            if (balanceRatiosWithFee[i] > invariantRatioWithFees) {
                uint256 nonTaxableAmount = balances[i].mulDown(invariantRatioWithFees.sub(FixedPoint.ONE));
                uint256 taxableAmount = amountsIn[i].sub(nonTaxableAmount);
                amountInWithoutFee = nonTaxableAmount.add(taxableAmount.mulDown(FixedPoint.ONE.sub(swapFeePercentage)));
            } else {
                amountInWithoutFee = amountsIn[i];
            }

            uint256 balanceRatio = balances[i].add(amountInWithoutFee).divDown(balances[i]);

            invariantRatio = invariantRatio.mulDown(balanceRatio.powDown(normalizedWeights[i]));
        }

        if (invariantRatio > FixedPoint.ONE) {
            return bptTotalSupply.mulDown(invariantRatio.sub(FixedPoint.ONE));
        } else {
            return 0;
        }
    }

    function _calcTokenInGivenExactBptOut(
        uint256 balance,
        uint256 normalizedWeight,
        uint256 bptAmountOut,
        uint256 bptTotalSupply,
        uint256 swapFeePercentage
    ) internal pure returns (uint256) {
        /******************************************************************************************
        // tokenInForExactBPTOut                                                                 //
        // a = amountIn                                                                          //
        // b = balance                      /  /    totalBPT + bptOut      \    (1 / w)       \  //
        // bptOut = bptAmountOut   a = b * |  | --------------------------  | ^          - 1  |  //
        // bpt = totalBPT                   \  \       totalBPT            /                  /  //
        // w = weight                                                                            //
        ******************************************************************************************/

        // Token in, so we round up overall.

        // Calculate the factor by which the invariant will increase after minting BPTAmountOut
        uint256 invariantRatio = bptTotalSupply.add(bptAmountOut).divUp(bptTotalSupply);
        _require(invariantRatio <= _MAX_INVARIANT_RATIO, Errors.MAX_OUT_BPT_FOR_TOKEN_IN);

        // Calculate by how much the token balance has to increase to match the invariantRatio
        uint256 balanceRatio = invariantRatio.powUp(FixedPoint.ONE.divUp(normalizedWeight));

        uint256 amountInWithoutFee = balance.mulUp(balanceRatio.sub(FixedPoint.ONE));

        // We can now compute how much extra balance is being deposited and used in virtual swaps, and charge swap fees
        // accordingly.
        uint256 taxablePercentage = normalizedWeight.complement();
        uint256 taxableAmount = amountInWithoutFee.mulUp(taxablePercentage);
        uint256 nonTaxableAmount = amountInWithoutFee.sub(taxableAmount);

        return nonTaxableAmount.add(taxableAmount.divUp(FixedPoint.ONE.sub(swapFeePercentage)));
    }

    function _calcBptInGivenExactTokensOut(
        uint256[] memory balances,
        uint256[] memory normalizedWeights,
        uint256[] memory amountsOut,
        uint256 bptTotalSupply,
        uint256 swapFeePercentage
    ) internal pure returns (uint256) {
        // BPT in, so we round up overall.

        uint256[] memory balanceRatiosWithoutFee = new uint256[](amountsOut.length);
        uint256 invariantRatioWithoutFees = 0;
        for (uint256 i = 0; i < balances.length; i++) {
            balanceRatiosWithoutFee[i] = balances[i].sub(amountsOut[i]).divUp(balances[i]);
            invariantRatioWithoutFees = invariantRatioWithoutFees.add(
                balanceRatiosWithoutFee[i].mulUp(normalizedWeights[i])
            );
        }

        uint256 invariantRatio = FixedPoint.ONE;
        for (uint256 i = 0; i < balances.length; i++) {
            // Swap fees are typically charged on 'token in', but there is no 'token in' here, so we apply it to
            // 'token out'. This results in slightly larger price impact.

            uint256 amountOutWithFee;
            if (invariantRatioWithoutFees > balanceRatiosWithoutFee[i]) {
                uint256 nonTaxableAmount = balances[i].mulDown(invariantRatioWithoutFees.complement());
                uint256 taxableAmount = amountsOut[i].sub(nonTaxableAmount);
                amountOutWithFee = nonTaxableAmount.add(taxableAmount.divUp(FixedPoint.ONE.sub(swapFeePercentage)));
            } else {
                amountOutWithFee = amountsOut[i];
            }

            uint256 balanceRatio = balances[i].sub(amountOutWithFee).divDown(balances[i]);

            invariantRatio = invariantRatio.mulDown(balanceRatio.powDown(normalizedWeights[i]));
        }

        return bptTotalSupply.mulUp(invariantRatio.complement());
    }

    function _calcTokenOutGivenExactBptIn(
        uint256 balance,
        uint256 normalizedWeight,
        uint256 bptAmountIn,
        uint256 bptTotalSupply,
        uint256 swapFeePercentage
    ) internal pure returns (uint256) {
        /*****************************************************************************************
        // exactBPTInForTokenOut                                                                //
        // a = amountOut                                                                        //
        // b = balance                     /      /    totalBPT - bptIn       \    (1 / w)  \   //
        // bptIn = bptAmountIn    a = b * |  1 - | --------------------------  | ^           |  //
        // bpt = totalBPT                  \      \       totalBPT            /             /   //
        // w = weight                                                                           //
        *****************************************************************************************/

        // Token out, so we round down overall. The multiplication rounds down, but the power rounds up (so the base
        // rounds up). Because (totalBPT - bptIn) / totalBPT <= 1, the exponent rounds down.

        // Calculate the factor by which the invariant will decrease after burning BPTAmountIn
        uint256 invariantRatio = bptTotalSupply.sub(bptAmountIn).divUp(bptTotalSupply);
        _require(invariantRatio >= _MIN_INVARIANT_RATIO, Errors.MIN_BPT_IN_FOR_TOKEN_OUT);

        // Calculate by how much the token balance has to decrease to match invariantRatio
        uint256 balanceRatio = invariantRatio.powUp(FixedPoint.ONE.divDown(normalizedWeight));

        // Because of rounding up, balanceRatio can be greater than one. Using complement prevents reverts.
        uint256 amountOutWithoutFee = balance.mulDown(balanceRatio.complement());

        // We can now compute how much excess balance is being withdrawn as a result of the virtual swaps, which result
        // in swap fees.
        uint256 taxablePercentage = normalizedWeight.complement();

        // Swap fees are typically charged on 'token in', but there is no 'token in' here, so we apply it
        // to 'token out'. This results in slightly larger price impact. Fees are rounded up.
        uint256 taxableAmount = amountOutWithoutFee.mulUp(taxablePercentage);
        uint256 nonTaxableAmount = amountOutWithoutFee.sub(taxableAmount);

        return nonTaxableAmount.add(taxableAmount.mulDown(FixedPoint.ONE.sub(swapFeePercentage)));
    }

    function _calcTokensOutGivenExactBptIn(
        uint256[] memory balances,
        uint256 bptAmountIn,
        uint256 totalBPT
    ) internal pure returns (uint256[] memory) {
        /**********************************************************************************************
        // exactBPTInForTokensOut                                                                    //
        // (per token)                                                                               //
        // aO = amountOut                  /        bptIn         \                                  //
        // b = balance           a0 = b * | ---------------------  |                                 //
        // bptIn = bptAmountIn             \       totalBPT       /                                  //
        // bpt = totalBPT                                                                            //
        **********************************************************************************************/

        // Since we're computing an amount out, we round down overall. This means rounding down on both the
        // multiplication and division.

        uint256 bptRatio = bptAmountIn.divDown(totalBPT);

        uint256[] memory amountsOut = new uint256[](balances.length);
        for (uint256 i = 0; i < balances.length; i++) {
            amountsOut[i] = balances[i].mulDown(bptRatio);
        }

        return amountsOut;
    }

    function _calcDueTokenProtocolSwapFeeAmount(
        uint256 balance,
        uint256 normalizedWeight,
        uint256 previousInvariant,
        uint256 currentInvariant,
        uint256 protocolSwapFeePercentage
    ) internal pure returns (uint256) {
        /*********************************************************************************
        /*  protocolSwapFeePercentage * balanceToken * ( 1 - (previousInvariant / currentInvariant) ^ (1 / weightToken))
        *********************************************************************************/

        if (currentInvariant <= previousInvariant) {
            // This shouldn't happen outside of rounding errors, but have this safeguard nonetheless to prevent the Pool
            // from entering a locked state in which joins and exits revert while computing accumulated swap fees.
            return 0;
        }

        // We round down to prevent issues in the Pool's accounting, even if it means paying slightly less in protocol
        // fees to the Vault.

        // Fee percentage and balance multiplications round down, while the subtrahend (power) rounds up (as does the
        // base). Because previousInvariant / currentInvariant <= 1, the exponent rounds down.

        uint256 base = previousInvariant.divUp(currentInvariant);
        uint256 exponent = FixedPoint.ONE.divDown(normalizedWeight);

        // Because the exponent is larger than one, the base of the power function has a lower bound. We cap to this
        // value to avoid numeric issues, which means in the extreme case (where the invariant growth is larger than
        // 1 / min exponent) the Pool will pay less in protocol fees than it should.
        base = Math.max(base, FixedPoint.MIN_POW_BASE_FREE_EXPONENT);

        uint256 power = base.powUp(exponent);

        uint256 tokenAccruedFees = balance.mulDown(power.complement());
        return tokenAccruedFees.mulDown(protocolSwapFeePercentage);
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;

import "@balancer-labs/v2-solidity-utils/contracts/openzeppelin/IERC20.sol";

import "./BaseWeightedPool.sol";

library WeightedPoolUserDataHelpers {
    function joinKind(bytes memory self) internal pure returns (BaseWeightedPool.JoinKind) {
        return abi.decode(self, (BaseWeightedPool.JoinKind));
    }

    function exitKind(bytes memory self) internal pure returns (BaseWeightedPool.ExitKind) {
        return abi.decode(self, (BaseWeightedPool.ExitKind));
    }

    // Joins

    function initialAmountsIn(bytes memory self) internal pure returns (uint256[] memory amountsIn) {
        (, amountsIn) = abi.decode(self, (BaseWeightedPool.JoinKind, uint256[]));
    }

    function exactTokensInForBptOut(bytes memory self)
        internal
        pure
        returns (uint256[] memory amountsIn, uint256 minBPTAmountOut)
    {
        (, amountsIn, minBPTAmountOut) = abi.decode(self, (BaseWeightedPool.JoinKind, uint256[], uint256));
    }

    function tokenInForExactBptOut(bytes memory self) internal pure returns (uint256 bptAmountOut, uint256 tokenIndex) {
        (, bptAmountOut, tokenIndex) = abi.decode(self, (BaseWeightedPool.JoinKind, uint256, uint256));
    }

    // Exits

    function exactBptInForTokenOut(bytes memory self) internal pure returns (uint256 bptAmountIn, uint256 tokenIndex) {
        (, bptAmountIn, tokenIndex) = abi.decode(self, (BaseWeightedPool.ExitKind, uint256, uint256));
    }

    function exactBptInForTokensOut(bytes memory self) internal pure returns (uint256 bptAmountIn) {
        (, bptAmountIn) = abi.decode(self, (BaseWeightedPool.ExitKind, uint256));
    }

    function bptInForExactTokensOut(bytes memory self)
        internal
        pure
        returns (uint256[] memory amountsOut, uint256 maxBPTAmountIn)
    {
        (, amountsOut, maxBPTAmountIn) = abi.decode(self, (BaseWeightedPool.ExitKind, uint256[], uint256));
    }
}

// SPDX-License-Identifier: MIT
// Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated
// documentation files (the “Software”), to deal in the Software without restriction, including without limitation the
// rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to
// permit persons to whom the Software is furnished to do so, subject to the following conditions:

// The above copyright notice and this permission notice shall be included in all copies or substantial portions of the
// Software.

// THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
// WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
// COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
// OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

pragma solidity ^0.7.0;

import "../helpers/BalancerErrors.sol";

/* solhint-disable */

/**
 * @dev Exponentiation and logarithm functions for 18 decimal fixed point numbers (both base and exponent/argument).
 *
 * Exponentiation and logarithm with arbitrary bases (x^y and log_x(y)) are implemented by conversion to natural
 * exponentiation and logarithm (where the base is Euler's number).
 *
 * @author Fernando Martinelli - @fernandomartinelli
 * @author Sergio Yuhjtman - @sergioyuhjtman
 * @author Daniel Fernandez - @dmf7z
 */
library LogExpMath {
    // All fixed point multiplications and divisions are inlined. This means we need to divide by ONE when multiplying
    // two numbers, and multiply by ONE when dividing them.

    // All arguments and return values are 18 decimal fixed point numbers.
    int256 constant ONE_18 = 1e18;

    // Internally, intermediate values are computed with higher precision as 20 decimal fixed point numbers, and in the
    // case of ln36, 36 decimals.
    int256 constant ONE_20 = 1e20;
    int256 constant ONE_36 = 1e36;

    // The domain of natural exponentiation is bound by the word size and number of decimals used.
    //
    // Because internally the result will be stored using 20 decimals, the largest possible result is
    // (2^255 - 1) / 10^20, which makes the largest exponent ln((2^255 - 1) / 10^20) = 130.700829182905140221.
    // The smallest possible result is 10^(-18), which makes largest negative argument
    // ln(10^(-18)) = -41.446531673892822312.
    // We use 130.0 and -41.0 to have some safety margin.
    int256 constant MAX_NATURAL_EXPONENT = 130e18;
    int256 constant MIN_NATURAL_EXPONENT = -41e18;

    // Bounds for ln_36's argument. Both ln(0.9) and ln(1.1) can be represented with 36 decimal places in a fixed point
    // 256 bit integer.
    int256 constant LN_36_LOWER_BOUND = ONE_18 - 1e17;
    int256 constant LN_36_UPPER_BOUND = ONE_18 + 1e17;

    uint256 constant MILD_EXPONENT_BOUND = 2**254 / uint256(ONE_20);

    // 18 decimal constants
    int256 constant x0 = 128000000000000000000; // 2ˆ7
    int256 constant a0 = 38877084059945950922200000000000000000000000000000000000; // eˆ(x0) (no decimals)
    int256 constant x1 = 64000000000000000000; // 2ˆ6
    int256 constant a1 = 6235149080811616882910000000; // eˆ(x1) (no decimals)

    // 20 decimal constants
    int256 constant x2 = 3200000000000000000000; // 2ˆ5
    int256 constant a2 = 7896296018268069516100000000000000; // eˆ(x2)
    int256 constant x3 = 1600000000000000000000; // 2ˆ4
    int256 constant a3 = 888611052050787263676000000; // eˆ(x3)
    int256 constant x4 = 800000000000000000000; // 2ˆ3
    int256 constant a4 = 298095798704172827474000; // eˆ(x4)
    int256 constant x5 = 400000000000000000000; // 2ˆ2
    int256 constant a5 = 5459815003314423907810; // eˆ(x5)
    int256 constant x6 = 200000000000000000000; // 2ˆ1
    int256 constant a6 = 738905609893065022723; // eˆ(x6)
    int256 constant x7 = 100000000000000000000; // 2ˆ0
    int256 constant a7 = 271828182845904523536; // eˆ(x7)
    int256 constant x8 = 50000000000000000000; // 2ˆ-1
    int256 constant a8 = 164872127070012814685; // eˆ(x8)
    int256 constant x9 = 25000000000000000000; // 2ˆ-2
    int256 constant a9 = 128402541668774148407; // eˆ(x9)
    int256 constant x10 = 12500000000000000000; // 2ˆ-3
    int256 constant a10 = 113314845306682631683; // eˆ(x10)
    int256 constant x11 = 6250000000000000000; // 2ˆ-4
    int256 constant a11 = 106449445891785942956; // eˆ(x11)

    /**
     * @dev Exponentiation (x^y) with unsigned 18 decimal fixed point base and exponent.
     *
     * Reverts if ln(x) * y is smaller than `MIN_NATURAL_EXPONENT`, or larger than `MAX_NATURAL_EXPONENT`.
     */
    function pow(uint256 x, uint256 y) internal pure returns (uint256) {
        if (y == 0) {
            // We solve the 0^0 indetermination by making it equal one.
            return uint256(ONE_18);
        }

        if (x == 0) {
            return 0;
        }

        // Instead of computing x^y directly, we instead rely on the properties of logarithms and exponentiation to
        // arrive at that result. In particular, exp(ln(x)) = x, and ln(x^y) = y * ln(x). This means
        // x^y = exp(y * ln(x)).

        // The ln function takes a signed value, so we need to make sure x fits in the signed 256 bit range.
        _require(x < 2**255, Errors.X_OUT_OF_BOUNDS);
        int256 x_int256 = int256(x);

        // We will compute y * ln(x) in a single step. Depending on the value of x, we can either use ln or ln_36. In
        // both cases, we leave the division by ONE_18 (due to fixed point multiplication) to the end.

        // This prevents y * ln(x) from overflowing, and at the same time guarantees y fits in the signed 256 bit range.
        _require(y < MILD_EXPONENT_BOUND, Errors.Y_OUT_OF_BOUNDS);
        int256 y_int256 = int256(y);

        int256 logx_times_y;
        if (LN_36_LOWER_BOUND < x_int256 && x_int256 < LN_36_UPPER_BOUND) {
            int256 ln_36_x = _ln_36(x_int256);

            // ln_36_x has 36 decimal places, so multiplying by y_int256 isn't as straightforward, since we can't just
            // bring y_int256 to 36 decimal places, as it might overflow. Instead, we perform two 18 decimal
            // multiplications and add the results: one with the first 18 decimals of ln_36_x, and one with the
            // (downscaled) last 18 decimals.
            logx_times_y = ((ln_36_x / ONE_18) * y_int256 + ((ln_36_x % ONE_18) * y_int256) / ONE_18);
        } else {
            logx_times_y = _ln(x_int256) * y_int256;
        }
        logx_times_y /= ONE_18;

        // Finally, we compute exp(y * ln(x)) to arrive at x^y
        _require(
            MIN_NATURAL_EXPONENT <= logx_times_y && logx_times_y <= MAX_NATURAL_EXPONENT,
            Errors.PRODUCT_OUT_OF_BOUNDS
        );

        return uint256(exp(logx_times_y));
    }

    /**
     * @dev Natural exponentiation (e^x) with signed 18 decimal fixed point exponent.
     *
     * Reverts if `x` is smaller than MIN_NATURAL_EXPONENT, or larger than `MAX_NATURAL_EXPONENT`.
     */
    function exp(int256 x) internal pure returns (int256) {
        _require(x >= MIN_NATURAL_EXPONENT && x <= MAX_NATURAL_EXPONENT, Errors.INVALID_EXPONENT);

        if (x < 0) {
            // We only handle positive exponents: e^(-x) is computed as 1 / e^x. We can safely make x positive since it
            // fits in the signed 256 bit range (as it is larger than MIN_NATURAL_EXPONENT).
            // Fixed point division requires multiplying by ONE_18.
            return ((ONE_18 * ONE_18) / exp(-x));
        }

        // First, we use the fact that e^(x+y) = e^x * e^y to decompose x into a sum of powers of two, which we call x_n,
        // where x_n == 2^(7 - n), and e^x_n = a_n has been precomputed. We choose the first x_n, x0, to equal 2^7
        // because all larger powers are larger than MAX_NATURAL_EXPONENT, and therefore not present in the
        // decomposition.
        // At the end of this process we will have the product of all e^x_n = a_n that apply, and the remainder of this
        // decomposition, which will be lower than the smallest x_n.
        // exp(x) = k_0 * a_0 * k_1 * a_1 * ... + k_n * a_n * exp(remainder), where each k_n equals either 0 or 1.
        // We mutate x by subtracting x_n, making it the remainder of the decomposition.

        // The first two a_n (e^(2^7) and e^(2^6)) are too large if stored as 18 decimal numbers, and could cause
        // intermediate overflows. Instead we store them as plain integers, with 0 decimals.
        // Additionally, x0 + x1 is larger than MAX_NATURAL_EXPONENT, which means they will not both be present in the
        // decomposition.

        // For each x_n, we test if that term is present in the decomposition (if x is larger than it), and if so deduct
        // it and compute the accumulated product.

        int256 firstAN;
        if (x >= x0) {
            x -= x0;
            firstAN = a0;
        } else if (x >= x1) {
            x -= x1;
            firstAN = a1;
        } else {
            firstAN = 1; // One with no decimal places
        }

        // We now transform x into a 20 decimal fixed point number, to have enhanced precision when computing the
        // smaller terms.
        x *= 100;

        // `product` is the accumulated product of all a_n (except a0 and a1), which starts at 20 decimal fixed point
        // one. Recall that fixed point multiplication requires dividing by ONE_20.
        int256 product = ONE_20;

        if (x >= x2) {
            x -= x2;
            product = (product * a2) / ONE_20;
        }
        if (x >= x3) {
            x -= x3;
            product = (product * a3) / ONE_20;
        }
        if (x >= x4) {
            x -= x4;
            product = (product * a4) / ONE_20;
        }
        if (x >= x5) {
            x -= x5;
            product = (product * a5) / ONE_20;
        }
        if (x >= x6) {
            x -= x6;
            product = (product * a6) / ONE_20;
        }
        if (x >= x7) {
            x -= x7;
            product = (product * a7) / ONE_20;
        }
        if (x >= x8) {
            x -= x8;
            product = (product * a8) / ONE_20;
        }
        if (x >= x9) {
            x -= x9;
            product = (product * a9) / ONE_20;
        }

        // x10 and x11 are unnecessary here since we have high enough precision already.

        // Now we need to compute e^x, where x is small (in particular, it is smaller than x9). We use the Taylor series
        // expansion for e^x: 1 + x + (x^2 / 2!) + (x^3 / 3!) + ... + (x^n / n!).

        int256 seriesSum = ONE_20; // The initial one in the sum, with 20 decimal places.
        int256 term; // Each term in the sum, where the nth term is (x^n / n!).

        // The first term is simply x.
        term = x;
        seriesSum += term;

        // Each term (x^n / n!) equals the previous one times x, divided by n. Since x is a fixed point number,
        // multiplying by it requires dividing by ONE_20, but dividing by the non-fixed point n values does not.

        term = ((term * x) / ONE_20) / 2;
        seriesSum += term;

        term = ((term * x) / ONE_20) / 3;
        seriesSum += term;

        term = ((term * x) / ONE_20) / 4;
        seriesSum += term;

        term = ((term * x) / ONE_20) / 5;
        seriesSum += term;

        term = ((term * x) / ONE_20) / 6;
        seriesSum += term;

        term = ((term * x) / ONE_20) / 7;
        seriesSum += term;

        term = ((term * x) / ONE_20) / 8;
        seriesSum += term;

        term = ((term * x) / ONE_20) / 9;
        seriesSum += term;

        term = ((term * x) / ONE_20) / 10;
        seriesSum += term;

        term = ((term * x) / ONE_20) / 11;
        seriesSum += term;

        term = ((term * x) / ONE_20) / 12;
        seriesSum += term;

        // 12 Taylor terms are sufficient for 18 decimal precision.

        // We now have the first a_n (with no decimals), and the product of all other a_n present, and the Taylor
        // approximation of the exponentiation of the remainder (both with 20 decimals). All that remains is to multiply
        // all three (one 20 decimal fixed point multiplication, dividing by ONE_20, and one integer multiplication),
        // and then drop two digits to return an 18 decimal value.

        return (((product * seriesSum) / ONE_20) * firstAN) / 100;
    }

    /**
     * @dev Logarithm (log(arg, base), with signed 18 decimal fixed point base and argument.
     */
    function log(int256 arg, int256 base) internal pure returns (int256) {
        // This performs a simple base change: log(arg, base) = ln(arg) / ln(base).

        // Both logBase and logArg are computed as 36 decimal fixed point numbers, either by using ln_36, or by
        // upscaling.

        int256 logBase;
        if (LN_36_LOWER_BOUND < base && base < LN_36_UPPER_BOUND) {
            logBase = _ln_36(base);
        } else {
            logBase = _ln(base) * ONE_18;
        }

        int256 logArg;
        if (LN_36_LOWER_BOUND < arg && arg < LN_36_UPPER_BOUND) {
            logArg = _ln_36(arg);
        } else {
            logArg = _ln(arg) * ONE_18;
        }

        // When dividing, we multiply by ONE_18 to arrive at a result with 18 decimal places
        return (logArg * ONE_18) / logBase;
    }

    /**
     * @dev Natural logarithm (ln(a)) with signed 18 decimal fixed point argument.
     */
    function ln(int256 a) internal pure returns (int256) {
        // The real natural logarithm is not defined for negative numbers or zero.
        _require(a > 0, Errors.OUT_OF_BOUNDS);
        if (LN_36_LOWER_BOUND < a && a < LN_36_UPPER_BOUND) {
            return _ln_36(a) / ONE_18;
        } else {
            return _ln(a);
        }
    }

    /**
     * @dev Internal natural logarithm (ln(a)) with signed 18 decimal fixed point argument.
     */
    function _ln(int256 a) private pure returns (int256) {
        if (a < ONE_18) {
            // Since ln(a^k) = k * ln(a), we can compute ln(a) as ln(a) = ln((1/a)^(-1)) = - ln((1/a)). If a is less
            // than one, 1/a will be greater than one, and this if statement will not be entered in the recursive call.
            // Fixed point division requires multiplying by ONE_18.
            return (-_ln((ONE_18 * ONE_18) / a));
        }

        // First, we use the fact that ln^(a * b) = ln(a) + ln(b) to decompose ln(a) into a sum of powers of two, which
        // we call x_n, where x_n == 2^(7 - n), which are the natural logarithm of precomputed quantities a_n (that is,
        // ln(a_n) = x_n). We choose the first x_n, x0, to equal 2^7 because the exponential of all larger powers cannot
        // be represented as 18 fixed point decimal numbers in 256 bits, and are therefore larger than a.
        // At the end of this process we will have the sum of all x_n = ln(a_n) that apply, and the remainder of this
        // decomposition, which will be lower than the smallest a_n.
        // ln(a) = k_0 * x_0 + k_1 * x_1 + ... + k_n * x_n + ln(remainder), where each k_n equals either 0 or 1.
        // We mutate a by subtracting a_n, making it the remainder of the decomposition.

        // For reasons related to how `exp` works, the first two a_n (e^(2^7) and e^(2^6)) are not stored as fixed point
        // numbers with 18 decimals, but instead as plain integers with 0 decimals, so we need to multiply them by
        // ONE_18 to convert them to fixed point.
        // For each a_n, we test if that term is present in the decomposition (if a is larger than it), and if so divide
        // by it and compute the accumulated sum.

        int256 sum = 0;
        if (a >= a0 * ONE_18) {
            a /= a0; // Integer, not fixed point division
            sum += x0;
        }

        if (a >= a1 * ONE_18) {
            a /= a1; // Integer, not fixed point division
            sum += x1;
        }

        // All other a_n and x_n are stored as 20 digit fixed point numbers, so we convert the sum and a to this format.
        sum *= 100;
        a *= 100;

        // Because further a_n are  20 digit fixed point numbers, we multiply by ONE_20 when dividing by them.

        if (a >= a2) {
            a = (a * ONE_20) / a2;
            sum += x2;
        }

        if (a >= a3) {
            a = (a * ONE_20) / a3;
            sum += x3;
        }

        if (a >= a4) {
            a = (a * ONE_20) / a4;
            sum += x4;
        }

        if (a >= a5) {
            a = (a * ONE_20) / a5;
            sum += x5;
        }

        if (a >= a6) {
            a = (a * ONE_20) / a6;
            sum += x6;
        }

        if (a >= a7) {
            a = (a * ONE_20) / a7;
            sum += x7;
        }

        if (a >= a8) {
            a = (a * ONE_20) / a8;
            sum += x8;
        }

        if (a >= a9) {
            a = (a * ONE_20) / a9;
            sum += x9;
        }

        if (a >= a10) {
            a = (a * ONE_20) / a10;
            sum += x10;
        }

        if (a >= a11) {
            a = (a * ONE_20) / a11;
            sum += x11;
        }

        // a is now a small number (smaller than a_11, which roughly equals 1.06). This means we can use a Taylor series
        // that converges rapidly for values of `a` close to one - the same one used in ln_36.
        // Let z = (a - 1) / (a + 1).
        // ln(a) = 2 * (z + z^3 / 3 + z^5 / 5 + z^7 / 7 + ... + z^(2 * n + 1) / (2 * n + 1))

        // Recall that 20 digit fixed point division requires multiplying by ONE_20, and multiplication requires
        // division by ONE_20.
        int256 z = ((a - ONE_20) * ONE_20) / (a + ONE_20);
        int256 z_squared = (z * z) / ONE_20;

        // num is the numerator of the series: the z^(2 * n + 1) term
        int256 num = z;

        // seriesSum holds the accumulated sum of each term in the series, starting with the initial z
        int256 seriesSum = num;

        // In each step, the numerator is multiplied by z^2
        num = (num * z_squared) / ONE_20;
        seriesSum += num / 3;

        num = (num * z_squared) / ONE_20;
        seriesSum += num / 5;

        num = (num * z_squared) / ONE_20;
        seriesSum += num / 7;

        num = (num * z_squared) / ONE_20;
        seriesSum += num / 9;

        num = (num * z_squared) / ONE_20;
        seriesSum += num / 11;

        // 6 Taylor terms are sufficient for 36 decimal precision.

        // Finally, we multiply by 2 (non fixed point) to compute ln(remainder)
        seriesSum *= 2;

        // We now have the sum of all x_n present, and the Taylor approximation of the logarithm of the remainder (both
        // with 20 decimals). All that remains is to sum these two, and then drop two digits to return a 18 decimal
        // value.

        return (sum + seriesSum) / 100;
    }

    /**
     * @dev Intrnal high precision (36 decimal places) natural logarithm (ln(x)) with signed 18 decimal fixed point argument,
     * for x close to one.
     *
     * Should only be used if x is between LN_36_LOWER_BOUND and LN_36_UPPER_BOUND.
     */
    function _ln_36(int256 x) private pure returns (int256) {
        // Since ln(1) = 0, a value of x close to one will yield a very small result, which makes using 36 digits
        // worthwhile.

        // First, we transform x to a 36 digit fixed point value.
        x *= ONE_18;

        // We will use the following Taylor expansion, which converges very rapidly. Let z = (x - 1) / (x + 1).
        // ln(x) = 2 * (z + z^3 / 3 + z^5 / 5 + z^7 / 7 + ... + z^(2 * n + 1) / (2 * n + 1))

        // Recall that 36 digit fixed point division requires multiplying by ONE_36, and multiplication requires
        // division by ONE_36.
        int256 z = ((x - ONE_36) * ONE_36) / (x + ONE_36);
        int256 z_squared = (z * z) / ONE_36;

        // num is the numerator of the series: the z^(2 * n + 1) term
        int256 num = z;

        // seriesSum holds the accumulated sum of each term in the series, starting with the initial z
        int256 seriesSum = num;

        // In each step, the numerator is multiplied by z^2
        num = (num * z_squared) / ONE_36;
        seriesSum += num / 3;

        num = (num * z_squared) / ONE_36;
        seriesSum += num / 5;

        num = (num * z_squared) / ONE_36;
        seriesSum += num / 7;

        num = (num * z_squared) / ONE_36;
        seriesSum += num / 9;

        num = (num * z_squared) / ONE_36;
        seriesSum += num / 11;

        num = (num * z_squared) / ONE_36;
        seriesSum += num / 13;

        num = (num * z_squared) / ONE_36;
        seriesSum += num / 15;

        // 8 Taylor terms are sufficient for 36 decimal precision.

        // All that remains is multiplying by 2 (non fixed point).
        return seriesSum * 2;
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;

// solhint-disable

/**
 * @dev Reverts if `condition` is false, with a revert reason containing `errorCode`. Only codes up to 999 are
 * supported.
 */
function _require(bool condition, uint256 errorCode) pure {
    if (!condition) _revert(errorCode);
}

/**
 * @dev Reverts with a revert reason containing `errorCode`. Only codes up to 999 are supported.
 */
function _revert(uint256 errorCode) pure {
    // We're going to dynamically create a revert string based on the error code, with the following format:
    // 'BAL#{errorCode}'
    // where the code is left-padded with zeroes to three digits (so they range from 000 to 999).
    //
    // We don't have revert strings embedded in the contract to save bytecode size: it takes much less space to store a
    // number (8 to 16 bits) than the individual string characters.
    //
    // The dynamic string creation algorithm that follows could be implemented in Solidity, but assembly allows for a
    // much denser implementation, again saving bytecode size. Given this function unconditionally reverts, this is a
    // safe place to rely on it without worrying about how its usage might affect e.g. memory contents.
    assembly {
        // First, we need to compute the ASCII representation of the error code. We assume that it is in the 0-999
        // range, so we only need to convert three digits. To convert the digits to ASCII, we add 0x30, the value for
        // the '0' character.

        let units := add(mod(errorCode, 10), 0x30)

        errorCode := div(errorCode, 10)
        let tenths := add(mod(errorCode, 10), 0x30)

        errorCode := div(errorCode, 10)
        let hundreds := add(mod(errorCode, 10), 0x30)

        // With the individual characters, we can now construct the full string. The "BAL#" part is a known constant
        // (0x42414c23): we simply shift this by 24 (to provide space for the 3 bytes of the error code), and add the
        // characters to it, each shifted by a multiple of 8.
        // The revert reason is then shifted left by 200 bits (256 minus the length of the string, 7 characters * 8 bits
        // per character = 56) to locate it in the most significant part of the 256 slot (the beginning of a byte
        // array).

        let revertReason := shl(200, add(0x42414c23000000, add(add(units, shl(8, tenths)), shl(16, hundreds))))

        // We can now encode the reason in memory, which can be safely overwritten as we're about to revert. The encoded
        // message will have the following layout:
        // [ revert reason identifier ] [ string location offset ] [ string length ] [ string contents ]

        // The Solidity revert reason identifier is 0x08c739a0, the function selector of the Error(string) function. We
        // also write zeroes to the next 28 bytes of memory, but those are about to be overwritten.
        mstore(0x0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
        // Next is the offset to the location of the string, which will be placed immediately after (20 bytes away).
        mstore(0x04, 0x0000000000000000000000000000000000000000000000000000000000000020)
        // The string length is fixed: 7 characters.
        mstore(0x24, 7)
        // Finally, the string itself is stored.
        mstore(0x44, revertReason)

        // Even if the string is only 7 bytes long, we need to return a full 32 byte slot containing it. The length of
        // the encoded message is therefore 4 + 32 + 32 + 32 = 100.
        revert(0, 100)
    }
}

library Errors {
    // Math
    uint256 internal constant ADD_OVERFLOW = 0;
    uint256 internal constant SUB_OVERFLOW = 1;
    uint256 internal constant SUB_UNDERFLOW = 2;
    uint256 internal constant MUL_OVERFLOW = 3;
    uint256 internal constant ZERO_DIVISION = 4;
    uint256 internal constant DIV_INTERNAL = 5;
    uint256 internal constant X_OUT_OF_BOUNDS = 6;
    uint256 internal constant Y_OUT_OF_BOUNDS = 7;
    uint256 internal constant PRODUCT_OUT_OF_BOUNDS = 8;
    uint256 internal constant INVALID_EXPONENT = 9;

    // Input
    uint256 internal constant OUT_OF_BOUNDS = 100;
    uint256 internal constant UNSORTED_ARRAY = 101;
    uint256 internal constant UNSORTED_TOKENS = 102;
    uint256 internal constant INPUT_LENGTH_MISMATCH = 103;
    uint256 internal constant ZERO_TOKEN = 104;

    // Shared pools
    uint256 internal constant MIN_TOKENS = 200;
    uint256 internal constant MAX_TOKENS = 201;
    uint256 internal constant MAX_SWAP_FEE_PERCENTAGE = 202;
    uint256 internal constant MIN_SWAP_FEE_PERCENTAGE = 203;
    uint256 internal constant MINIMUM_BPT = 204;
    uint256 internal constant CALLER_NOT_VAULT = 205;
    uint256 internal constant UNINITIALIZED = 206;
    uint256 internal constant BPT_IN_MAX_AMOUNT = 207;
    uint256 internal constant BPT_OUT_MIN_AMOUNT = 208;
    uint256 internal constant EXPIRED_PERMIT = 209;
    uint256 internal constant NOT_TWO_TOKENS = 210;
    uint256 internal constant DISABLED = 211;

    // Pools
    uint256 internal constant MIN_AMP = 300;
    uint256 internal constant MAX_AMP = 301;
    uint256 internal constant MIN_WEIGHT = 302;
    uint256 internal constant MAX_STABLE_TOKENS = 303;
    uint256 internal constant MAX_IN_RATIO = 304;
    uint256 internal constant MAX_OUT_RATIO = 305;
    uint256 internal constant MIN_BPT_IN_FOR_TOKEN_OUT = 306;
    uint256 internal constant MAX_OUT_BPT_FOR_TOKEN_IN = 307;
    uint256 internal constant NORMALIZED_WEIGHT_INVARIANT = 308;
    uint256 internal constant INVALID_TOKEN = 309;
    uint256 internal constant UNHANDLED_JOIN_KIND = 310;
    uint256 internal constant ZERO_INVARIANT = 311;
    uint256 internal constant ORACLE_INVALID_SECONDS_QUERY = 312;
    uint256 internal constant ORACLE_NOT_INITIALIZED = 313;
    uint256 internal constant ORACLE_QUERY_TOO_OLD = 314;
    uint256 internal constant ORACLE_INVALID_INDEX = 315;
    uint256 internal constant ORACLE_BAD_SECS = 316;
    uint256 internal constant AMP_END_TIME_TOO_CLOSE = 317;
    uint256 internal constant AMP_ONGOING_UPDATE = 318;
    uint256 internal constant AMP_RATE_TOO_HIGH = 319;
    uint256 internal constant AMP_NO_ONGOING_UPDATE = 320;
    uint256 internal constant STABLE_INVARIANT_DIDNT_CONVERGE = 321;
    uint256 internal constant STABLE_GET_BALANCE_DIDNT_CONVERGE = 322;
    uint256 internal constant RELAYER_NOT_CONTRACT = 323;
    uint256 internal constant BASE_POOL_RELAYER_NOT_CALLED = 324;
    uint256 internal constant REBALANCING_RELAYER_REENTERED = 325;
    uint256 internal constant GRADUAL_UPDATE_TIME_TRAVEL = 326;
    uint256 internal constant SWAPS_DISABLED = 327;
    uint256 internal constant CALLER_IS_NOT_LBP_OWNER = 328;
    uint256 internal constant PRICE_RATE_OVERFLOW = 329;

    // Lib
    uint256 internal constant REENTRANCY = 400;
    uint256 internal constant SENDER_NOT_ALLOWED = 401;
    uint256 internal constant PAUSED = 402;
    uint256 internal constant PAUSE_WINDOW_EXPIRED = 403;
    uint256 internal constant MAX_PAUSE_WINDOW_DURATION = 404;
    uint256 internal constant MAX_BUFFER_PERIOD_DURATION = 405;
    uint256 internal constant INSUFFICIENT_BALANCE = 406;
    uint256 internal constant INSUFFICIENT_ALLOWANCE = 407;
    uint256 internal constant ERC20_TRANSFER_FROM_ZERO_ADDRESS = 408;
    uint256 internal constant ERC20_TRANSFER_TO_ZERO_ADDRESS = 409;
    uint256 internal constant ERC20_MINT_TO_ZERO_ADDRESS = 410;
    uint256 internal constant ERC20_BURN_FROM_ZERO_ADDRESS = 411;
    uint256 internal constant ERC20_APPROVE_FROM_ZERO_ADDRESS = 412;
    uint256 internal constant ERC20_APPROVE_TO_ZERO_ADDRESS = 413;
    uint256 internal constant ERC20_TRANSFER_EXCEEDS_ALLOWANCE = 414;
    uint256 internal constant ERC20_DECREASED_ALLOWANCE_BELOW_ZERO = 415;
    uint256 internal constant ERC20_TRANSFER_EXCEEDS_BALANCE = 416;
    uint256 internal constant ERC20_BURN_EXCEEDS_ALLOWANCE = 417;
    uint256 internal constant SAFE_ERC20_CALL_FAILED = 418;
    uint256 internal constant ADDRESS_INSUFFICIENT_BALANCE = 419;
    uint256 internal constant ADDRESS_CANNOT_SEND_VALUE = 420;
    uint256 internal constant SAFE_CAST_VALUE_CANT_FIT_INT256 = 421;
    uint256 internal constant GRANT_SENDER_NOT_ADMIN = 422;
    uint256 internal constant REVOKE_SENDER_NOT_ADMIN = 423;
    uint256 internal constant RENOUNCE_SENDER_NOT_ALLOWED = 424;
    uint256 internal constant BUFFER_PERIOD_EXPIRED = 425;
    uint256 internal constant CALLER_IS_NOT_OWNER = 426;
    uint256 internal constant NEW_OWNER_IS_ZERO = 427;
    uint256 internal constant CODE_DEPLOYMENT_FAILED = 428;
    uint256 internal constant CALL_TO_NON_CONTRACT = 429;
    uint256 internal constant LOW_LEVEL_CALL_FAILED = 430;

    // Vault
    uint256 internal constant INVALID_POOL_ID = 500;
    uint256 internal constant CALLER_NOT_POOL = 501;
    uint256 internal constant SENDER_NOT_ASSET_MANAGER = 502;
    uint256 internal constant USER_DOESNT_ALLOW_RELAYER = 503;
    uint256 internal constant INVALID_SIGNATURE = 504;
    uint256 internal constant EXIT_BELOW_MIN = 505;
    uint256 internal constant JOIN_ABOVE_MAX = 506;
    uint256 internal constant SWAP_LIMIT = 507;
    uint256 internal constant SWAP_DEADLINE = 508;
    uint256 internal constant CANNOT_SWAP_SAME_TOKEN = 509;
    uint256 internal constant UNKNOWN_AMOUNT_IN_FIRST_SWAP = 510;
    uint256 internal constant MALCONSTRUCTED_MULTIHOP_SWAP = 511;
    uint256 internal constant INTERNAL_BALANCE_OVERFLOW = 512;
    uint256 internal constant INSUFFICIENT_INTERNAL_BALANCE = 513;
    uint256 internal constant INVALID_ETH_INTERNAL_BALANCE = 514;
    uint256 internal constant INVALID_POST_LOAN_BALANCE = 515;
    uint256 internal constant INSUFFICIENT_ETH = 516;
    uint256 internal constant UNALLOCATED_ETH = 517;
    uint256 internal constant ETH_TRANSFER = 518;
    uint256 internal constant CANNOT_USE_ETH_SENTINEL = 519;
    uint256 internal constant TOKENS_MISMATCH = 520;
    uint256 internal constant TOKEN_NOT_REGISTERED = 521;
    uint256 internal constant TOKEN_ALREADY_REGISTERED = 522;
    uint256 internal constant TOKENS_ALREADY_SET = 523;
    uint256 internal constant TOKENS_LENGTH_MUST_BE_2 = 524;
    uint256 internal constant NONZERO_TOKEN_BALANCE = 525;
    uint256 internal constant BALANCE_TOTAL_OVERFLOW = 526;
    uint256 internal constant POOL_NO_TOKENS = 527;
    uint256 internal constant INSUFFICIENT_FLASH_LOAN_BALANCE = 528;

    // Fees
    uint256 internal constant SWAP_FEE_PERCENTAGE_TOO_HIGH = 600;
    uint256 internal constant FLASH_LOAN_FEE_PERCENTAGE_TOO_HIGH = 601;
    uint256 internal constant INSUFFICIENT_FLASH_LOAN_FEE_AMOUNT = 602;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.7.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;
pragma experimental ABIEncoderV2;

import "@balancer-labs/v2-solidity-utils/contracts/math/Math.sol";
import "@balancer-labs/v2-solidity-utils/contracts/math/FixedPoint.sol";
import "@balancer-labs/v2-solidity-utils/contracts/helpers/InputHelpers.sol";
import "@balancer-labs/v2-solidity-utils/contracts/helpers/TemporarilyPausable.sol";
import "@balancer-labs/v2-solidity-utils/contracts/helpers/WordCodec.sol";
import "@balancer-labs/v2-solidity-utils/contracts/openzeppelin/ERC20.sol";

import "@balancer-labs/v2-vault/contracts/interfaces/IVault.sol";
import "@balancer-labs/v2-vault/contracts/interfaces/IBasePool.sol";

import "@balancer-labs/v2-asset-manager-utils/contracts/IAssetManager.sol";

import "./BalancerPoolToken.sol";
import "./BasePoolAuthorization.sol";

// solhint-disable max-states-count

/**
 * @dev Reference implementation for the base layer of a Pool contract that manages a single Pool with optional
 * Asset Managers, an admin-controlled swap fee percentage, and an emergency pause mechanism.
 *
 * Note that neither swap fees nor the pause mechanism are used by this contract. They are passed through so that
 * derived contracts can use them via the `_addSwapFeeAmount` and `_subtractSwapFeeAmount` functions, and the
 * `whenNotPaused` modifier.
 *
 * No admin permissions are checked here: instead, this contract delegates that to the Vault's own Authorizer.
 *
 * Because this contract doesn't implement the swap hooks, derived contracts should generally inherit from
 * BaseGeneralPool or BaseMinimalSwapInfoPool. Otherwise, subclasses must inherit from the corresponding interfaces
 * and implement the swap callbacks themselves.
 */
abstract contract BasePool is IBasePool, BasePoolAuthorization, BalancerPoolToken, TemporarilyPausable {
    using WordCodec for bytes32;
    using FixedPoint for uint256;

    uint256 private constant _MIN_TOKENS = 2;

    // 1e18 corresponds to 1.0, or a 100% fee
    uint256 private constant _MIN_SWAP_FEE_PERCENTAGE = 1e12; // 0.0001%
    uint256 private constant _MAX_SWAP_FEE_PERCENTAGE = 1e17; // 10%

    uint256 private constant _MINIMUM_BPT = 1e6;

    // Storage slot that can be used to store unrelated pieces of information. In particular, by default is used
    // to store only the swap fee percentage of a pool. But it can be extended to store some more pieces of information.
    // The swap fee percentage is stored in the most-significant 64 bits, therefore the remaining 192 bits can be
    // used to store any other piece of information.
    bytes32 private _miscData;
    uint256 private constant _SWAP_FEE_PERCENTAGE_OFFSET = 192;

    IVault private immutable _vault;
    bytes32 private immutable _poolId;

    event SwapFeePercentageChanged(uint256 swapFeePercentage);

    constructor(
        IVault vault,
        IVault.PoolSpecialization specialization,
        string memory name,
        string memory symbol,
        IERC20[] memory tokens,
        address[] memory assetManagers,
        uint256 swapFeePercentage,
        uint256 pauseWindowDuration,
        uint256 bufferPeriodDuration,
        address owner
    )
        // Base Pools are expected to be deployed using factories. By using the factory address as the action
        // disambiguator, we make all Pools deployed by the same factory share action identifiers. This allows for
        // simpler management of permissions (such as being able to manage granting the 'set fee percentage' action in
        // any Pool created by the same factory), while still making action identifiers unique among different factories
        // if the selectors match, preventing accidental errors.
        Authentication(bytes32(uint256(msg.sender)))
        BalancerPoolToken(name, symbol)
        BasePoolAuthorization(owner)
        TemporarilyPausable(pauseWindowDuration, bufferPeriodDuration)
    {
        _require(tokens.length >= _MIN_TOKENS, Errors.MIN_TOKENS);
        _require(tokens.length <= _getMaxTokens(), Errors.MAX_TOKENS);

        // The Vault only requires the token list to be ordered for the Two Token Pools specialization. However,
        // to make the developer experience consistent, we are requiring this condition for all the native pools.
        // Also, since these Pools will register tokens only once, we can ensure the Pool tokens will follow the same
        // order. We rely on this property to make Pools simpler to write, as it lets us assume that the
        // order of token-specific parameters (such as token weights) will not change.
        InputHelpers.ensureArrayIsSorted(tokens);

        _setSwapFeePercentage(swapFeePercentage);

        bytes32 poolId = vault.registerPool(specialization);

        vault.registerTokens(poolId, tokens, assetManagers);

        // Set immutable state variables - these cannot be read from during construction
        _vault = vault;
        _poolId = poolId;
    }

    // Getters / Setters

    function getVault() public view returns (IVault) {
        return _vault;
    }

    function getPoolId() public view override returns (bytes32) {
        return _poolId;
    }

    function _getTotalTokens() internal view virtual returns (uint256);

    function _getMaxTokens() internal pure virtual returns (uint256);

    function getSwapFeePercentage() public view returns (uint256) {
        return _miscData.decodeUint64(_SWAP_FEE_PERCENTAGE_OFFSET);
    }

    function setSwapFeePercentage(uint256 swapFeePercentage) external virtual authenticate whenNotPaused {
        _setSwapFeePercentage(swapFeePercentage);
    }

    function _setSwapFeePercentage(uint256 swapFeePercentage) private {
        _require(swapFeePercentage >= _MIN_SWAP_FEE_PERCENTAGE, Errors.MIN_SWAP_FEE_PERCENTAGE);
        _require(swapFeePercentage <= _MAX_SWAP_FEE_PERCENTAGE, Errors.MAX_SWAP_FEE_PERCENTAGE);

        _miscData = _miscData.insertUint64(swapFeePercentage, _SWAP_FEE_PERCENTAGE_OFFSET);
        emit SwapFeePercentageChanged(swapFeePercentage);
    }

    function setAssetManagerPoolConfig(IERC20 token, bytes memory poolConfig)
        public
        virtual
        authenticate
        whenNotPaused
    {
        _setAssetManagerPoolConfig(token, poolConfig);
    }

    function _setAssetManagerPoolConfig(IERC20 token, bytes memory poolConfig) private {
        bytes32 poolId = getPoolId();
        (, , , address assetManager) = getVault().getPoolTokenInfo(poolId, token);

        IAssetManager(assetManager).setConfig(poolId, poolConfig);
    }

    function setPaused(bool paused) external authenticate {
        _setPaused(paused);
    }

    function _isOwnerOnlyAction(bytes32 actionId) internal view virtual override returns (bool) {
        return
            (actionId == getActionId(this.setSwapFeePercentage.selector)) ||
            (actionId == getActionId(this.setAssetManagerPoolConfig.selector));
    }

    function _getMiscData() internal view returns (bytes32) {
        return _miscData;
    }

    /**
     * Inserts data into the least-significant 192 bits of the misc data storage slot.
     * Note that the remaining 64 bits are used for the swap fee percentage and cannot be overloaded.
     */
    function _setMiscData(bytes32 newData) internal {
        _miscData = _miscData.insertBits192(newData, 0);
    }

    // Join / Exit Hooks

    modifier onlyVault(bytes32 poolId) {
        _require(msg.sender == address(getVault()), Errors.CALLER_NOT_VAULT);
        _require(poolId == getPoolId(), Errors.INVALID_POOL_ID);
        _;
    }

    function onJoinPool(
        bytes32 poolId,
        address sender,
        address recipient,
        uint256[] memory balances,
        uint256 lastChangeBlock,
        uint256 protocolSwapFeePercentage,
        bytes memory userData
    ) public virtual override onlyVault(poolId) returns (uint256[] memory, uint256[] memory) {
        uint256[] memory scalingFactors = _scalingFactors();

        if (totalSupply() == 0) {
            (uint256 bptAmountOut, uint256[] memory amountsIn) = _onInitializePool(
                poolId,
                sender,
                recipient,
                scalingFactors,
                userData
            );

            // On initialization, we lock _MINIMUM_BPT by minting it for the zero address. This BPT acts as a minimum
            // as it will never be burned, which reduces potential issues with rounding, and also prevents the Pool from
            // ever being fully drained.
            _require(bptAmountOut >= _MINIMUM_BPT, Errors.MINIMUM_BPT);
            _mintPoolTokens(address(0), _MINIMUM_BPT);
            _mintPoolTokens(recipient, bptAmountOut - _MINIMUM_BPT);

            // amountsIn are amounts entering the Pool, so we round up.
            _downscaleUpArray(amountsIn, scalingFactors);

            return (amountsIn, new uint256[](_getTotalTokens()));
        } else {
            _upscaleArray(balances, scalingFactors);
            (uint256 bptAmountOut, uint256[] memory amountsIn, uint256[] memory dueProtocolFeeAmounts) = _onJoinPool(
                poolId,
                sender,
                recipient,
                balances,
                lastChangeBlock,
                protocolSwapFeePercentage,
                scalingFactors,
                userData
            );

            // Note we no longer use `balances` after calling `_onJoinPool`, which may mutate it.

            _mintPoolTokens(recipient, bptAmountOut);

            // amountsIn are amounts entering the Pool, so we round up.
            _downscaleUpArray(amountsIn, scalingFactors);
            // dueProtocolFeeAmounts are amounts exiting the Pool, so we round down.
            _downscaleDownArray(dueProtocolFeeAmounts, scalingFactors);

            return (amountsIn, dueProtocolFeeAmounts);
        }
    }

    function onExitPool(
        bytes32 poolId,
        address sender,
        address recipient,
        uint256[] memory balances,
        uint256 lastChangeBlock,
        uint256 protocolSwapFeePercentage,
        bytes memory userData
    ) public virtual override onlyVault(poolId) returns (uint256[] memory, uint256[] memory) {
        uint256[] memory scalingFactors = _scalingFactors();
        _upscaleArray(balances, scalingFactors);

        (uint256 bptAmountIn, uint256[] memory amountsOut, uint256[] memory dueProtocolFeeAmounts) = _onExitPool(
            poolId,
            sender,
            recipient,
            balances,
            lastChangeBlock,
            protocolSwapFeePercentage,
            scalingFactors,
            userData
        );

        // Note we no longer use `balances` after calling `_onExitPool`, which may mutate it.

        _burnPoolTokens(sender, bptAmountIn);

        // Both amountsOut and dueProtocolFeeAmounts are amounts exiting the Pool, so we round down.
        _downscaleDownArray(amountsOut, scalingFactors);
        _downscaleDownArray(dueProtocolFeeAmounts, scalingFactors);

        return (amountsOut, dueProtocolFeeAmounts);
    }

    // Query functions

    /**
     * @dev Returns the amount of BPT that would be granted to `recipient` if the `onJoinPool` hook were called by the
     * Vault with the same arguments, along with the number of tokens `sender` would have to supply.
     *
     * This function is not meant to be called directly, but rather from a helper contract that fetches current Vault
     * data, such as the protocol swap fee percentage and Pool balances.
     *
     * Like `IVault.queryBatchSwap`, this function is not view due to internal implementation details: the caller must
     * explicitly use eth_call instead of eth_sendTransaction.
     */
    function queryJoin(
        bytes32 poolId,
        address sender,
        address recipient,
        uint256[] memory balances,
        uint256 lastChangeBlock,
        uint256 protocolSwapFeePercentage,
        bytes memory userData
    ) external returns (uint256 bptOut, uint256[] memory amountsIn) {
        InputHelpers.ensureInputLengthMatch(balances.length, _getTotalTokens());

        _queryAction(
            poolId,
            sender,
            recipient,
            balances,
            lastChangeBlock,
            protocolSwapFeePercentage,
            userData,
            _onJoinPool,
            _downscaleUpArray
        );

        // The `return` opcode is executed directly inside `_queryAction`, so execution never reaches this statement,
        // and we don't need to return anything here - it just silences compiler warnings.
        return (bptOut, amountsIn);
    }

    /**
     * @dev Returns the amount of BPT that would be burned from `sender` if the `onExitPool` hook were called by the
     * Vault with the same arguments, along with the number of tokens `recipient` would receive.
     *
     * This function is not meant to be called directly, but rather from a helper contract that fetches current Vault
     * data, such as the protocol swap fee percentage and Pool balances.
     *
     * Like `IVault.queryBatchSwap`, this function is not view due to internal implementation details: the caller must
     * explicitly use eth_call instead of eth_sendTransaction.
     */
    function queryExit(
        bytes32 poolId,
        address sender,
        address recipient,
        uint256[] memory balances,
        uint256 lastChangeBlock,
        uint256 protocolSwapFeePercentage,
        bytes memory userData
    ) external returns (uint256 bptIn, uint256[] memory amountsOut) {
        InputHelpers.ensureInputLengthMatch(balances.length, _getTotalTokens());

        _queryAction(
            poolId,
            sender,
            recipient,
            balances,
            lastChangeBlock,
            protocolSwapFeePercentage,
            userData,
            _onExitPool,
            _downscaleDownArray
        );

        // The `return` opcode is executed directly inside `_queryAction`, so execution never reaches this statement,
        // and we don't need to return anything here - it just silences compiler warnings.
        return (bptIn, amountsOut);
    }

    // Internal hooks to be overridden by derived contracts - all token amounts (except BPT) in these interfaces are
    // upscaled.

    /**
     * @dev Called when the Pool is joined for the first time; that is, when the BPT total supply is zero.
     *
     * Returns the amount of BPT to mint, and the token amounts the Pool will receive in return.
     *
     * Minted BPT will be sent to `recipient`, except for _MINIMUM_BPT, which will be deducted from this amount and sent
     * to the zero address instead. This will cause that BPT to remain forever locked there, preventing total BTP from
     * ever dropping below that value, and ensuring `_onInitializePool` can only be called once in the entire Pool's
     * lifetime.
     *
     * The tokens granted to the Pool will be transferred from `sender`. These amounts are considered upscaled and will
     * be downscaled (rounding up) before being returned to the Vault.
     */
    function _onInitializePool(
        bytes32 poolId,
        address sender,
        address recipient,
        uint256[] memory scalingFactors,
        bytes memory userData
    ) internal virtual returns (uint256 bptAmountOut, uint256[] memory amountsIn);

    /**
     * @dev Called whenever the Pool is joined after the first initialization join (see `_onInitializePool`).
     *
     * Returns the amount of BPT to mint, the token amounts that the Pool will receive in return, and the number of
     * tokens to pay in protocol swap fees.
     *
     * Implementations of this function might choose to mutate the `balances` array to save gas (e.g. when
     * performing intermediate calculations, such as subtraction of due protocol fees). This can be done safely.
     *
     * Minted BPT will be sent to `recipient`.
     *
     * The tokens granted to the Pool will be transferred from `sender`. These amounts are considered upscaled and will
     * be downscaled (rounding up) before being returned to the Vault.
     *
     * Due protocol swap fees will be taken from the Pool's balance in the Vault (see `IBasePool.onJoinPool`). These
     * amounts are considered upscaled and will be downscaled (rounding down) before being returned to the Vault.
     */
    function _onJoinPool(
        bytes32 poolId,
        address sender,
        address recipient,
        uint256[] memory balances,
        uint256 lastChangeBlock,
        uint256 protocolSwapFeePercentage,
        uint256[] memory scalingFactors,
        bytes memory userData
    )
        internal
        virtual
        returns (
            uint256 bptAmountOut,
            uint256[] memory amountsIn,
            uint256[] memory dueProtocolFeeAmounts
        );

    /**
     * @dev Called whenever the Pool is exited.
     *
     * Returns the amount of BPT to burn, the token amounts for each Pool token that the Pool will grant in return, and
     * the number of tokens to pay in protocol swap fees.
     *
     * Implementations of this function might choose to mutate the `balances` array to save gas (e.g. when
     * performing intermediate calculations, such as subtraction of due protocol fees). This can be done safely.
     *
     * BPT will be burnt from `sender`.
     *
     * The Pool will grant tokens to `recipient`. These amounts are considered upscaled and will be downscaled
     * (rounding down) before being returned to the Vault.
     *
     * Due protocol swap fees will be taken from the Pool's balance in the Vault (see `IBasePool.onExitPool`). These
     * amounts are considered upscaled and will be downscaled (rounding down) before being returned to the Vault.
     */
    function _onExitPool(
        bytes32 poolId,
        address sender,
        address recipient,
        uint256[] memory balances,
        uint256 lastChangeBlock,
        uint256 protocolSwapFeePercentage,
        uint256[] memory scalingFactors,
        bytes memory userData
    )
        internal
        virtual
        returns (
            uint256 bptAmountIn,
            uint256[] memory amountsOut,
            uint256[] memory dueProtocolFeeAmounts
        );

    // Internal functions

    /**
     * @dev Adds swap fee amount to `amount`, returning a higher value.
     */
    function _addSwapFeeAmount(uint256 amount) internal view returns (uint256) {
        // This returns amount + fee amount, so we round up (favoring a higher fee amount).
        return amount.divUp(FixedPoint.ONE.sub(getSwapFeePercentage()));
    }

    /**
     * @dev Subtracts swap fee amount from `amount`, returning a lower value.
     */
    function _subtractSwapFeeAmount(uint256 amount) internal view returns (uint256) {
        // This returns amount - fee amount, so we round up (favoring a higher fee amount).
        uint256 feeAmount = amount.mulUp(getSwapFeePercentage());
        return amount.sub(feeAmount);
    }

    // Scaling

    /**
     * @dev Returns a scaling factor that, when multiplied to a token amount for `token`, normalizes its balance as if
     * it had 18 decimals.
     */
    function _computeScalingFactor(IERC20 token) internal view returns (uint256) {
        // Tokens that don't implement the `decimals` method are not supported.
        uint256 tokenDecimals = ERC20(address(token)).decimals();

        // Tokens with more than 18 decimals are not supported.
        uint256 decimalsDifference = Math.sub(18, tokenDecimals);
        return FixedPoint.ONE * 10**decimalsDifference;
    }

    /**
     * @dev Returns the scaling factor for one of the Pool's tokens. Reverts if `token` is not a token registered by the
     * Pool.
     *
     * All scaling factors are fixed-point values with 18 decimals, to allow for this function to be overridden by
     * derived contracts that need to apply further scaling, making these factors potentially non-integer.
     *
     * The largest 'base' scaling factor (i.e. in tokens with less than 18 decimals) is 10**18, which in fixed-point is
     * 10**36. This value can be multiplied with a 112 bit Vault balance with no overflow by a factor of ~1e7, making
     * even relatively 'large' factors safe to use.
     *
     * The 1e7 figure is the result of 2**256 / (1e18 * 1e18 * 2**112).
     */
    function _scalingFactor(IERC20 token) internal view virtual returns (uint256);

    /**
     * @dev Same as `_scalingFactor()`, except for all registered tokens (in the same order as registered). The Vault
     * will always pass balances in this order when calling any of the Pool hooks.
     */
    function _scalingFactors() internal view virtual returns (uint256[] memory);

    function getScalingFactors() external view returns (uint256[] memory) {
        return _scalingFactors();
    }

    /**
     * @dev Applies `scalingFactor` to `amount`, resulting in a larger or equal value depending on whether it needed
     * scaling or not.
     */
    function _upscale(uint256 amount, uint256 scalingFactor) internal pure returns (uint256) {
        // Upscale rounding wouldn't necessarily always go in the same direction: in a swap for example the balance of
        // token in should be rounded up, and that of token out rounded down. This is the only place where we round in
        // the same direction for all amounts, as the impact of this rounding is expected to be minimal (and there's no
        // rounding error unless `_scalingFactor()` is overriden).
        return FixedPoint.mulDown(amount, scalingFactor);
    }

    /**
     * @dev Same as `_upscale`, but for an entire array. This function does not return anything, but instead *mutates*
     * the `amounts` array.
     */
    function _upscaleArray(uint256[] memory amounts, uint256[] memory scalingFactors) internal view {
        for (uint256 i = 0; i < _getTotalTokens(); ++i) {
            amounts[i] = FixedPoint.mulDown(amounts[i], scalingFactors[i]);
        }
    }

    /**
     * @dev Reverses the `scalingFactor` applied to `amount`, resulting in a smaller or equal value depending on
     * whether it needed scaling or not. The result is rounded down.
     */
    function _downscaleDown(uint256 amount, uint256 scalingFactor) internal pure returns (uint256) {
        return FixedPoint.divDown(amount, scalingFactor);
    }

    /**
     * @dev Same as `_downscaleDown`, but for an entire array. This function does not return anything, but instead
     * *mutates* the `amounts` array.
     */
    function _downscaleDownArray(uint256[] memory amounts, uint256[] memory scalingFactors) internal view {
        for (uint256 i = 0; i < _getTotalTokens(); ++i) {
            amounts[i] = FixedPoint.divDown(amounts[i], scalingFactors[i]);
        }
    }

    /**
     * @dev Reverses the `scalingFactor` applied to `amount`, resulting in a smaller or equal value depending on
     * whether it needed scaling or not. The result is rounded up.
     */
    function _downscaleUp(uint256 amount, uint256 scalingFactor) internal pure returns (uint256) {
        return FixedPoint.divUp(amount, scalingFactor);
    }

    /**
     * @dev Same as `_downscaleUp`, but for an entire array. This function does not return anything, but instead
     * *mutates* the `amounts` array.
     */
    function _downscaleUpArray(uint256[] memory amounts, uint256[] memory scalingFactors) internal view {
        for (uint256 i = 0; i < _getTotalTokens(); ++i) {
            amounts[i] = FixedPoint.divUp(amounts[i], scalingFactors[i]);
        }
    }

    function _getAuthorizer() internal view override returns (IAuthorizer) {
        // Access control management is delegated to the Vault's Authorizer. This lets Balancer Governance manage which
        // accounts can call permissioned functions: for example, to perform emergency pauses.
        // If the owner is delegated, then *all* permissioned functions, including `setSwapFeePercentage`, will be under
        // Governance control.
        return getVault().getAuthorizer();
    }

    function _queryAction(
        bytes32 poolId,
        address sender,
        address recipient,
        uint256[] memory balances,
        uint256 lastChangeBlock,
        uint256 protocolSwapFeePercentage,
        bytes memory userData,
        function(bytes32, address, address, uint256[] memory, uint256, uint256, uint256[] memory, bytes memory)
            internal
            returns (uint256, uint256[] memory, uint256[] memory) _action,
        function(uint256[] memory, uint256[] memory) internal view _downscaleArray
    ) private {
        // This uses the same technique used by the Vault in queryBatchSwap. Refer to that function for a detailed
        // explanation.

        if (msg.sender != address(this)) {
            // We perform an external call to ourselves, forwarding the same calldata. In this call, the else clause of
            // the preceding if statement will be executed instead.

            // solhint-disable-next-line avoid-low-level-calls
            (bool success, ) = address(this).call(msg.data);

            // solhint-disable-next-line no-inline-assembly
            assembly {
                // This call should always revert to decode the bpt and token amounts from the revert reason
                switch success
                    case 0 {
                        // Note we are manually writing the memory slot 0. We can safely overwrite whatever is
                        // stored there as we take full control of the execution and then immediately return.

                        // We copy the first 4 bytes to check if it matches with the expected signature, otherwise
                        // there was another revert reason and we should forward it.
                        returndatacopy(0, 0, 0x04)
                        let error := and(mload(0), 0xffffffff00000000000000000000000000000000000000000000000000000000)

                        // If the first 4 bytes don't match with the expected signature, we forward the revert reason.
                        if eq(eq(error, 0x43adbafb00000000000000000000000000000000000000000000000000000000), 0) {
                            returndatacopy(0, 0, returndatasize())
                            revert(0, returndatasize())
                        }

                        // The returndata contains the signature, followed by the raw memory representation of the
                        // `bptAmount` and `tokenAmounts` (array: length + data). We need to return an ABI-encoded
                        // representation of these.
                        // An ABI-encoded response will include one additional field to indicate the starting offset of
                        // the `tokenAmounts` array. The `bptAmount` will be laid out in the first word of the
                        // returndata.
                        //
                        // In returndata:
                        // [ signature ][ bptAmount ][ tokenAmounts length ][ tokenAmounts values ]
                        // [  4 bytes  ][  32 bytes ][       32 bytes      ][ (32 * length) bytes ]
                        //
                        // We now need to return (ABI-encoded values):
                        // [ bptAmount ][ tokeAmounts offset ][ tokenAmounts length ][ tokenAmounts values ]
                        // [  32 bytes ][       32 bytes     ][       32 bytes      ][ (32 * length) bytes ]

                        // We copy 32 bytes for the `bptAmount` from returndata into memory.
                        // Note that we skip the first 4 bytes for the error signature
                        returndatacopy(0, 0x04, 32)

                        // The offsets are 32-bytes long, so the array of `tokenAmounts` will start after
                        // the initial 64 bytes.
                        mstore(0x20, 64)

                        // We now copy the raw memory array for the `tokenAmounts` from returndata into memory.
                        // Since bpt amount and offset take up 64 bytes, we start copying at address 0x40. We also
                        // skip the first 36 bytes from returndata, which correspond to the signature plus bpt amount.
                        returndatacopy(0x40, 0x24, sub(returndatasize(), 36))

                        // We finally return the ABI-encoded uint256 and the array, which has a total length equal to
                        // the size of returndata, plus the 32 bytes of the offset but without the 4 bytes of the
                        // error signature.
                        return(0, add(returndatasize(), 28))
                    }
                    default {
                        // This call should always revert, but we fail nonetheless if that didn't happen
                        invalid()
                    }
            }
        } else {
            uint256[] memory scalingFactors = _scalingFactors();
            _upscaleArray(balances, scalingFactors);

            (uint256 bptAmount, uint256[] memory tokenAmounts, ) = _action(
                poolId,
                sender,
                recipient,
                balances,
                lastChangeBlock,
                protocolSwapFeePercentage,
                scalingFactors,
                userData
            );

            _downscaleArray(tokenAmounts, scalingFactors);

            // solhint-disable-next-line no-inline-assembly
            assembly {
                // We will return a raw representation of `bptAmount` and `tokenAmounts` in memory, which is composed of
                // a 32-byte uint256, followed by a 32-byte for the array length, and finally the 32-byte uint256 values
                // Because revert expects a size in bytes, we multiply the array length (stored at `tokenAmounts`) by 32
                let size := mul(mload(tokenAmounts), 32)

                // We store the `bptAmount` in the previous slot to the `tokenAmounts` array. We can make sure there
                // will be at least one available slot due to how the memory scratch space works.
                // We can safely overwrite whatever is stored in this slot as we will revert immediately after that.
                let start := sub(tokenAmounts, 0x20)
                mstore(start, bptAmount)

                // We send one extra value for the error signature "QueryError(uint256,uint256[])" which is 0x43adbafb
                // We use the previous slot to `bptAmount`.
                mstore(sub(start, 0x20), 0x0000000000000000000000000000000000000000000000000000000043adbafb)
                start := sub(start, 0x04)

                // When copying from `tokenAmounts` into returndata, we copy the additional 68 bytes to also return
                // the `bptAmount`, the array 's length, and the error signature.
                revert(start, add(size, 68))
            }
        }
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;
pragma experimental ABIEncoderV2;

import "./IBasePool.sol";

/**
 * @dev Pool contracts with the MinimalSwapInfo or TwoToken specialization settings should implement this interface.
 *
 * This is called by the Vault when a user calls `IVault.swap` or `IVault.batchSwap` to swap with this Pool.
 * Returns the number of tokens the Pool will grant to the user in a 'given in' swap, or that the user will grant
 * to the pool in a 'given out' swap.
 *
 * This can often be implemented by a `view` function, since many pricing algorithms don't need to track state
 * changes in swaps. However, contracts implementing this in non-view functions should check that the caller is
 * indeed the Vault.
 */
interface IMinimalSwapInfoPool is IBasePool {
    function onSwap(
        SwapRequest memory swapRequest,
        uint256 currentBalanceTokenIn,
        uint256 currentBalanceTokenOut
    ) external returns (uint256 amount);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.7.0;

import "../helpers/BalancerErrors.sol";

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow checks.
 * Adapted from OpenZeppelin's SafeMath library
 */
library Math {
    /**
     * @dev Returns the addition of two unsigned integers of 256 bits, reverting on overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        _require(c >= a, Errors.ADD_OVERFLOW);
        return c;
    }

    /**
     * @dev Returns the addition of two signed integers, reverting on overflow.
     */
    function add(int256 a, int256 b) internal pure returns (int256) {
        int256 c = a + b;
        _require((b >= 0 && c >= a) || (b < 0 && c < a), Errors.ADD_OVERFLOW);
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers of 256 bits, reverting on overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        _require(b <= a, Errors.SUB_OVERFLOW);
        uint256 c = a - b;
        return c;
    }

    /**
     * @dev Returns the subtraction of two signed integers, reverting on overflow.
     */
    function sub(int256 a, int256 b) internal pure returns (int256) {
        int256 c = a - b;
        _require((b >= 0 && c <= a) || (b < 0 && c > a), Errors.SUB_OVERFLOW);
        return c;
    }

    /**
     * @dev Returns the largest of two numbers of 256 bits.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers of 256 bits.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a * b;
        _require(a == 0 || c / a == b, Errors.MUL_OVERFLOW);
        return c;
    }

    function div(
        uint256 a,
        uint256 b,
        bool roundUp
    ) internal pure returns (uint256) {
        return roundUp ? divUp(a, b) : divDown(a, b);
    }

    function divDown(uint256 a, uint256 b) internal pure returns (uint256) {
        _require(b != 0, Errors.ZERO_DIVISION);
        return a / b;
    }

    function divUp(uint256 a, uint256 b) internal pure returns (uint256) {
        _require(b != 0, Errors.ZERO_DIVISION);

        if (a == 0) {
            return 0;
        } else {
            return 1 + (a - 1) / b;
        }
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;

import "./BalancerErrors.sol";
import "./ITemporarilyPausable.sol";

/**
 * @dev Allows for a contract to be paused during an initial period after deployment, disabling functionality. Can be
 * used as an emergency switch in case a security vulnerability or threat is identified.
 *
 * The contract can only be paused during the Pause Window, a period that starts at deployment. It can also be
 * unpaused and repaused any number of times during this period. This is intended to serve as a safety measure: it lets
 * system managers react quickly to potentially dangerous situations, knowing that this action is reversible if careful
 * analysis later determines there was a false alarm.
 *
 * If the contract is paused when the Pause Window finishes, it will remain in the paused state through an additional
 * Buffer Period, after which it will be automatically unpaused forever. This is to ensure there is always enough time
 * to react to an emergency, even if the threat is discovered shortly before the Pause Window expires.
 *
 * Note that since the contract can only be paused within the Pause Window, unpausing during the Buffer Period is
 * irreversible.
 */
abstract contract TemporarilyPausable is ITemporarilyPausable {
    // The Pause Window and Buffer Period are timestamp-based: they should not be relied upon for sub-minute accuracy.
    // solhint-disable not-rely-on-time

    uint256 private constant _MAX_PAUSE_WINDOW_DURATION = 90 days;
    uint256 private constant _MAX_BUFFER_PERIOD_DURATION = 30 days;

    uint256 private immutable _pauseWindowEndTime;
    uint256 private immutable _bufferPeriodEndTime;

    bool private _paused;

    constructor(uint256 pauseWindowDuration, uint256 bufferPeriodDuration) {
        _require(pauseWindowDuration <= _MAX_PAUSE_WINDOW_DURATION, Errors.MAX_PAUSE_WINDOW_DURATION);
        _require(bufferPeriodDuration <= _MAX_BUFFER_PERIOD_DURATION, Errors.MAX_BUFFER_PERIOD_DURATION);

        uint256 pauseWindowEndTime = block.timestamp + pauseWindowDuration;

        _pauseWindowEndTime = pauseWindowEndTime;
        _bufferPeriodEndTime = pauseWindowEndTime + bufferPeriodDuration;
    }

    /**
     * @dev Reverts if the contract is paused.
     */
    modifier whenNotPaused() {
        _ensureNotPaused();
        _;
    }

    /**
     * @dev Returns the current contract pause status, as well as the end times of the Pause Window and Buffer
     * Period.
     */
    function getPausedState()
        external
        view
        override
        returns (
            bool paused,
            uint256 pauseWindowEndTime,
            uint256 bufferPeriodEndTime
        )
    {
        paused = !_isNotPaused();
        pauseWindowEndTime = _getPauseWindowEndTime();
        bufferPeriodEndTime = _getBufferPeriodEndTime();
    }

    /**
     * @dev Sets the pause state to `paused`. The contract can only be paused until the end of the Pause Window, and
     * unpaused until the end of the Buffer Period.
     *
     * Once the Buffer Period expires, this function reverts unconditionally.
     */
    function _setPaused(bool paused) internal {
        if (paused) {
            _require(block.timestamp < _getPauseWindowEndTime(), Errors.PAUSE_WINDOW_EXPIRED);
        } else {
            _require(block.timestamp < _getBufferPeriodEndTime(), Errors.BUFFER_PERIOD_EXPIRED);
        }

        _paused = paused;
        emit PausedStateChanged(paused);
    }

    /**
     * @dev Reverts if the contract is paused.
     */
    function _ensureNotPaused() internal view {
        _require(_isNotPaused(), Errors.PAUSED);
    }

    /**
     * @dev Returns true if the contract is unpaused.
     *
     * Once the Buffer Period expires, the gas cost of calling this function is reduced dramatically, as storage is no
     * longer accessed.
     */
    function _isNotPaused() internal view returns (bool) {
        // After the Buffer Period, the (inexpensive) timestamp check short-circuits the storage access.
        return block.timestamp > _getBufferPeriodEndTime() || !_paused;
    }

    // These getters lead to reduced bytecode size by inlining the immutable variables in a single place.

    function _getPauseWindowEndTime() private view returns (uint256) {
        return _pauseWindowEndTime;
    }

    function _getBufferPeriodEndTime() private view returns (uint256) {
        return _bufferPeriodEndTime;
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;

/**
 * @dev Library for encoding and decoding values stored inside a 256 bit word. Typically used to pack multiple values in
 * a single storage slot, saving gas by performing less storage accesses.
 *
 * Each value is defined by its size and the least significant bit in the word, also known as offset. For example, two
 * 128 bit values may be encoded in a word by assigning one an offset of 0, and the other an offset of 128.
 */
library WordCodec {
    // Masks are values with the least significant N bits set. They can be used to extract an encoded value from a word,
    // or to insert a new one replacing the old.
    uint256 private constant _MASK_1 = 2**(1) - 1;
    uint256 private constant _MASK_10 = 2**(10) - 1;
    uint256 private constant _MASK_16 = 2**(16) - 1;
    uint256 private constant _MASK_22 = 2**(22) - 1;
    uint256 private constant _MASK_31 = 2**(31) - 1;
    uint256 private constant _MASK_32 = 2**(32) - 1;
    uint256 private constant _MASK_53 = 2**(53) - 1;
    uint256 private constant _MASK_64 = 2**(64) - 1;
    uint256 private constant _MASK_128 = 2**(128) - 1;
    uint256 private constant _MASK_192 = 2**(192) - 1;

    // Largest positive values that can be represented as N bits signed integers.
    int256 private constant _MAX_INT_22 = 2**(21) - 1;
    int256 private constant _MAX_INT_53 = 2**(52) - 1;

    // In-place insertion

    /**
     * @dev Inserts a boolean value shifted by an offset into a 256 bit word, replacing the old value. Returns the new
     * word.
     */
    function insertBool(
        bytes32 word,
        bool value,
        uint256 offset
    ) internal pure returns (bytes32) {
        bytes32 clearedWord = bytes32(uint256(word) & ~(_MASK_1 << offset));
        return clearedWord | bytes32(uint256(value ? 1 : 0) << offset);
    }

    // Unsigned

    /**
     * @dev Inserts a 10 bit unsigned integer shifted by an offset into a 256 bit word, replacing the old value. Returns
     * the new word.
     *
     * Assumes `value` only uses its least significant 10 bits, otherwise it may overwrite sibling bytes.
     */
    function insertUint10(
        bytes32 word,
        uint256 value,
        uint256 offset
    ) internal pure returns (bytes32) {
        bytes32 clearedWord = bytes32(uint256(word) & ~(_MASK_10 << offset));
        return clearedWord | bytes32(value << offset);
    }

    /**
     * @dev Inserts a 16 bit unsigned integer shifted by an offset into a 256 bit word, replacing the old value.
     * Returns the new word.
     *
     * Assumes `value` only uses its least significant 16 bits, otherwise it may overwrite sibling bytes.
     */
    function insertUint16(
        bytes32 word,
        uint256 value,
        uint256 offset
    ) internal pure returns (bytes32) {
        bytes32 clearedWord = bytes32(uint256(word) & ~(_MASK_16 << offset));
        return clearedWord | bytes32(value << offset);
    }

    /**
     * @dev Inserts a 31 bit unsigned integer shifted by an offset into a 256 bit word, replacing the old value. Returns
     * the new word.
     *
     * Assumes `value` can be represented using 31 bits.
     */
    function insertUint31(
        bytes32 word,
        uint256 value,
        uint256 offset
    ) internal pure returns (bytes32) {
        bytes32 clearedWord = bytes32(uint256(word) & ~(_MASK_31 << offset));
        return clearedWord | bytes32(value << offset);
    }

    /**
     * @dev Inserts a 32 bit unsigned integer shifted by an offset into a 256 bit word, replacing the old value. Returns
     * the new word.
     *
     * Assumes `value` only uses its least significant 32 bits, otherwise it may overwrite sibling bytes.
     */
    function insertUint32(
        bytes32 word,
        uint256 value,
        uint256 offset
    ) internal pure returns (bytes32) {
        bytes32 clearedWord = bytes32(uint256(word) & ~(_MASK_32 << offset));
        return clearedWord | bytes32(value << offset);
    }

    /**
     * @dev Inserts a 64 bit unsigned integer shifted by an offset into a 256 bit word, replacing the old value. Returns
     * the new word.
     *
     * Assumes `value` only uses its least significant 64 bits, otherwise it may overwrite sibling bytes.
     */
    function insertUint64(
        bytes32 word,
        uint256 value,
        uint256 offset
    ) internal pure returns (bytes32) {
        bytes32 clearedWord = bytes32(uint256(word) & ~(_MASK_64 << offset));
        return clearedWord | bytes32(value << offset);
    }

    // Signed

    /**
     * @dev Inserts a 22 bits signed integer shifted by an offset into a 256 bit word, replacing the old value. Returns
     * the new word.
     *
     * Assumes `value` can be represented using 22 bits.
     */
    function insertInt22(
        bytes32 word,
        int256 value,
        uint256 offset
    ) internal pure returns (bytes32) {
        bytes32 clearedWord = bytes32(uint256(word) & ~(_MASK_22 << offset));
        // Integer values need masking to remove the upper bits of negative values.
        return clearedWord | bytes32((uint256(value) & _MASK_22) << offset);
    }

    // Bytes

    /**
     * @dev Inserts 192 bit shifted by an offset into a 256 bit word, replacing the old value. Returns the new word.
     *
     * Assumes `value` can be represented using 192 bits.
     */
    function insertBits192(
        bytes32 word,
        bytes32 value,
        uint256 offset
    ) internal pure returns (bytes32) {
        bytes32 clearedWord = bytes32(uint256(word) & ~(_MASK_192 << offset));
        return clearedWord | bytes32((uint256(value) & _MASK_192) << offset);
    }

    // Encoding

    // Unsigned

    /**
     * @dev Encodes an unsigned integer shifted by an offset. This performs no size checks: it is up to the caller to
     * ensure that the values are bounded.
     *
     * The return value can be logically ORed with other encoded values to form a 256 bit word.
     */
    function encodeUint(uint256 value, uint256 offset) internal pure returns (bytes32) {
        return bytes32(value << offset);
    }

    // Signed

    /**
     * @dev Encodes a 22 bits signed integer shifted by an offset.
     *
     * The return value can be logically ORed with other encoded values to form a 256 bit word.
     */
    function encodeInt22(int256 value, uint256 offset) internal pure returns (bytes32) {
        // Integer values need masking to remove the upper bits of negative values.
        return bytes32((uint256(value) & _MASK_22) << offset);
    }

    /**
     * @dev Encodes a 53 bits signed integer shifted by an offset.
     *
     * The return value can be logically ORed with other encoded values to form a 256 bit word.
     */
    function encodeInt53(int256 value, uint256 offset) internal pure returns (bytes32) {
        // Integer values need masking to remove the upper bits of negative values.
        return bytes32((uint256(value) & _MASK_53) << offset);
    }

    // Decoding

    /**
     * @dev Decodes and returns a boolean shifted by an offset from a 256 bit word.
     */
    function decodeBool(bytes32 word, uint256 offset) internal pure returns (bool) {
        return (uint256(word >> offset) & _MASK_1) == 1;
    }

    // Unsigned

    /**
     * @dev Decodes and returns a 10 bit unsigned integer shifted by an offset from a 256 bit word.
     */
    function decodeUint10(bytes32 word, uint256 offset) internal pure returns (uint256) {
        return uint256(word >> offset) & _MASK_10;
    }

    /**
     * @dev Decodes and returns a 16 bit unsigned integer shifted by an offset from a 256 bit word.
     */
    function decodeUint16(bytes32 word, uint256 offset) internal pure returns (uint256) {
        return uint256(word >> offset) & _MASK_16;
    }

    /**
     * @dev Decodes and returns a 31 bit unsigned integer shifted by an offset from a 256 bit word.
     */
    function decodeUint31(bytes32 word, uint256 offset) internal pure returns (uint256) {
        return uint256(word >> offset) & _MASK_31;
    }

    /**
     * @dev Decodes and returns a 32 bit unsigned integer shifted by an offset from a 256 bit word.
     */
    function decodeUint32(bytes32 word, uint256 offset) internal pure returns (uint256) {
        return uint256(word >> offset) & _MASK_32;
    }

    /**
     * @dev Decodes and returns a 64 bit unsigned integer shifted by an offset from a 256 bit word.
     */
    function decodeUint64(bytes32 word, uint256 offset) internal pure returns (uint256) {
        return uint256(word >> offset) & _MASK_64;
    }

    /**
     * @dev Decodes and returns a 128 bit unsigned integer shifted by an offset from a 256 bit word.
     */
    function decodeUint128(bytes32 word, uint256 offset) internal pure returns (uint256) {
        return uint256(word >> offset) & _MASK_128;
    }

    // Signed

    /**
     * @dev Decodes and returns a 22 bits signed integer shifted by an offset from a 256 bit word.
     */
    function decodeInt22(bytes32 word, uint256 offset) internal pure returns (int256) {
        int256 value = int256(uint256(word >> offset) & _MASK_22);
        // In case the decoded value is greater than the max positive integer that can be represented with 22 bits,
        // we know it was originally a negative integer. Therefore, we mask it to restore the sign in the 256 bit
        // representation.
        return value > _MAX_INT_22 ? (value | int256(~_MASK_22)) : value;
    }

    /**
     * @dev Decodes and returns a 53 bits signed integer shifted by an offset from a 256 bit word.
     */
    function decodeInt53(bytes32 word, uint256 offset) internal pure returns (int256) {
        int256 value = int256(uint256(word >> offset) & _MASK_53);
        // In case the decoded value is greater than the max positive integer that can be represented with 53 bits,
        // we know it was originally a negative integer. Therefore, we mask it to restore the sign in the 256 bit
        // representation.

        return value > _MAX_INT_53 ? (value | int256(~_MASK_53)) : value;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.7.0;

import "../helpers/BalancerErrors.sol";

import "./IERC20.sol";
import "./SafeMath.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is IERC20 {
    using SafeMath for uint256;

    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(msg.sender, recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(msg.sender, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(
            sender,
            msg.sender,
            _allowances[sender][msg.sender].sub(amount, Errors.ERC20_TRANSFER_EXCEEDS_ALLOWANCE)
        );
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(msg.sender, spender, _allowances[msg.sender][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(
            msg.sender,
            spender,
            _allowances[msg.sender][spender].sub(subtractedValue, Errors.ERC20_DECREASED_ALLOWANCE_BELOW_ZERO)
        );
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal virtual {
        _require(sender != address(0), Errors.ERC20_TRANSFER_FROM_ZERO_ADDRESS);
        _require(recipient != address(0), Errors.ERC20_TRANSFER_TO_ZERO_ADDRESS);

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, Errors.ERC20_TRANSFER_EXCEEDS_BALANCE);
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        _require(account != address(0), Errors.ERC20_BURN_FROM_ZERO_ADDRESS);

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, Errors.ERC20_BURN_EXCEEDS_ALLOWANCE);
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma experimental ABIEncoderV2;

import "@balancer-labs/v2-solidity-utils/contracts/openzeppelin/IERC20.sol";
import "@balancer-labs/v2-solidity-utils/contracts/helpers/ISignaturesValidator.sol";
import "@balancer-labs/v2-solidity-utils/contracts/helpers/ITemporarilyPausable.sol";
import "@balancer-labs/v2-solidity-utils/contracts/misc/IWETH.sol";

import "./IAsset.sol";
import "./IAuthorizer.sol";
import "./IFlashLoanRecipient.sol";
import "./IProtocolFeesCollector.sol";

pragma solidity ^0.7.0;

/**
 * @dev Full external interface for the Vault core contract - no external or public methods exist in the contract that
 * don't override one of these declarations.
 */
interface IVault is ISignaturesValidator, ITemporarilyPausable {
    // Generalities about the Vault:
    //
    // - Whenever documentation refers to 'tokens', it strictly refers to ERC20-compliant token contracts. Tokens are
    // transferred out of the Vault by calling the `IERC20.transfer` function, and transferred in by calling
    // `IERC20.transferFrom`. In these cases, the sender must have previously allowed the Vault to use their tokens by
    // calling `IERC20.approve`. The only deviation from the ERC20 standard that is supported is functions not returning
    // a boolean value: in these scenarios, a non-reverting call is assumed to be successful.
    //
    // - All non-view functions in the Vault are non-reentrant: calling them while another one is mid-execution (e.g.
    // while execution control is transferred to a token contract during a swap) will result in a revert. View
    // functions can be called in a re-reentrant way, but doing so might cause them to return inconsistent results.
    // Contracts calling view functions in the Vault must make sure the Vault has not already been entered.
    //
    // - View functions revert if referring to either unregistered Pools, or unregistered tokens for registered Pools.

    // Authorizer
    //
    // Some system actions are permissioned, like setting and collecting protocol fees. This permissioning system exists
    // outside of the Vault in the Authorizer contract: the Vault simply calls the Authorizer to check if the caller
    // can perform a given action.

    /**
     * @dev Returns the Vault's Authorizer.
     */
    function getAuthorizer() external view returns (IAuthorizer);

    /**
     * @dev Sets a new Authorizer for the Vault. The caller must be allowed by the current Authorizer to do this.
     *
     * Emits an `AuthorizerChanged` event.
     */
    function setAuthorizer(IAuthorizer newAuthorizer) external;

    /**
     * @dev Emitted when a new authorizer is set by `setAuthorizer`.
     */
    event AuthorizerChanged(IAuthorizer indexed newAuthorizer);

    // Relayers
    //
    // Additionally, it is possible for an account to perform certain actions on behalf of another one, using their
    // Vault ERC20 allowance and Internal Balance. These accounts are said to be 'relayers' for these Vault functions,
    // and are expected to be smart contracts with sound authentication mechanisms. For an account to be able to wield
    // this power, two things must occur:
    //  - The Authorizer must grant the account the permission to be a relayer for the relevant Vault function. This
    //    means that Balancer governance must approve each individual contract to act as a relayer for the intended
    //    functions.
    //  - Each user must approve the relayer to act on their behalf.
    // This double protection means users cannot be tricked into approving malicious relayers (because they will not
    // have been allowed by the Authorizer via governance), nor can malicious relayers approved by a compromised
    // Authorizer or governance drain user funds, since they would also need to be approved by each individual user.

    /**
     * @dev Returns true if `user` has approved `relayer` to act as a relayer for them.
     */
    function hasApprovedRelayer(address user, address relayer) external view returns (bool);

    /**
     * @dev Allows `relayer` to act as a relayer for `sender` if `approved` is true, and disallows it otherwise.
     *
     * Emits a `RelayerApprovalChanged` event.
     */
    function setRelayerApproval(
        address sender,
        address relayer,
        bool approved
    ) external;

    /**
     * @dev Emitted every time a relayer is approved or disapproved by `setRelayerApproval`.
     */
    event RelayerApprovalChanged(address indexed relayer, address indexed sender, bool approved);

    // Internal Balance
    //
    // Users can deposit tokens into the Vault, where they are allocated to their Internal Balance, and later
    // transferred or withdrawn. It can also be used as a source of tokens when joining Pools, as a destination
    // when exiting them, and as either when performing swaps. This usage of Internal Balance results in greatly reduced
    // gas costs when compared to relying on plain ERC20 transfers, leading to large savings for frequent users.
    //
    // Internal Balance management features batching, which means a single contract call can be used to perform multiple
    // operations of different kinds, with different senders and recipients, at once.

    /**
     * @dev Returns `user`'s Internal Balance for a set of tokens.
     */
    function getInternalBalance(address user, IERC20[] memory tokens) external view returns (uint256[] memory);

    /**
     * @dev Performs a set of user balance operations, which involve Internal Balance (deposit, withdraw or transfer)
     * and plain ERC20 transfers using the Vault's allowance. This last feature is particularly useful for relayers, as
     * it lets integrators reuse a user's Vault allowance.
     *
     * For each operation, if the caller is not `sender`, it must be an authorized relayer for them.
     */
    function manageUserBalance(UserBalanceOp[] memory ops) external payable;

    /**
     * @dev Data for `manageUserBalance` operations, which include the possibility for ETH to be sent and received
     without manual WETH wrapping or unwrapping.
     */
    struct UserBalanceOp {
        UserBalanceOpKind kind;
        IAsset asset;
        uint256 amount;
        address sender;
        address payable recipient;
    }

    // There are four possible operations in `manageUserBalance`:
    //
    // - DEPOSIT_INTERNAL
    // Increases the Internal Balance of the `recipient` account by transferring tokens from the corresponding
    // `sender`. The sender must have allowed the Vault to use their tokens via `IERC20.approve()`.
    //
    // ETH can be used by passing the ETH sentinel value as the asset and forwarding ETH in the call: it will be wrapped
    // and deposited as WETH. Any ETH amount remaining will be sent back to the caller (not the sender, which is
    // relevant for relayers).
    //
    // Emits an `InternalBalanceChanged` event.
    //
    //
    // - WITHDRAW_INTERNAL
    // Decreases the Internal Balance of the `sender` account by transferring tokens to the `recipient`.
    //
    // ETH can be used by passing the ETH sentinel value as the asset. This will deduct WETH instead, unwrap it and send
    // it to the recipient as ETH.
    //
    // Emits an `InternalBalanceChanged` event.
    //
    //
    // - TRANSFER_INTERNAL
    // Transfers tokens from the Internal Balance of the `sender` account to the Internal Balance of `recipient`.
    //
    // Reverts if the ETH sentinel value is passed.
    //
    // Emits an `InternalBalanceChanged` event.
    //
    //
    // - TRANSFER_EXTERNAL
    // Transfers tokens from `sender` to `recipient`, using the Vault's ERC20 allowance. This is typically used by
    // relayers, as it lets them reuse a user's Vault allowance.
    //
    // Reverts if the ETH sentinel value is passed.
    //
    // Emits an `ExternalBalanceTransfer` event.

    enum UserBalanceOpKind { DEPOSIT_INTERNAL, WITHDRAW_INTERNAL, TRANSFER_INTERNAL, TRANSFER_EXTERNAL }

    /**
     * @dev Emitted when a user's Internal Balance changes, either from calls to `manageUserBalance`, or through
     * interacting with Pools using Internal Balance.
     *
     * Because Internal Balance works exclusively with ERC20 tokens, ETH deposits and withdrawals will use the WETH
     * address.
     */
    event InternalBalanceChanged(address indexed user, IERC20 indexed token, int256 delta);

    /**
     * @dev Emitted when a user's Vault ERC20 allowance is used by the Vault to transfer tokens to an external account.
     */
    event ExternalBalanceTransfer(IERC20 indexed token, address indexed sender, address recipient, uint256 amount);

    // Pools
    //
    // There are three specialization settings for Pools, which allow for cheaper swaps at the cost of reduced
    // functionality:
    //
    //  - General: no specialization, suited for all Pools. IGeneralPool is used for swap request callbacks, passing the
    // balance of all tokens in the Pool. These Pools have the largest swap costs (because of the extra storage reads),
    // which increase with the number of registered tokens.
    //
    //  - Minimal Swap Info: IMinimalSwapInfoPool is used instead of IGeneralPool, which saves gas by only passing the
    // balance of the two tokens involved in the swap. This is suitable for some pricing algorithms, like the weighted
    // constant product one popularized by Balancer V1. Swap costs are smaller compared to general Pools, and are
    // independent of the number of registered tokens.
    //
    //  - Two Token: only allows two tokens to be registered. This achieves the lowest possible swap gas cost. Like
    // minimal swap info Pools, these are called via IMinimalSwapInfoPool.

    enum PoolSpecialization { GENERAL, MINIMAL_SWAP_INFO, TWO_TOKEN }

    /**
     * @dev Registers the caller account as a Pool with a given specialization setting. Returns the Pool's ID, which
     * is used in all Pool-related functions. Pools cannot be deregistered, nor can the Pool's specialization be
     * changed.
     *
     * The caller is expected to be a smart contract that implements either `IGeneralPool` or `IMinimalSwapInfoPool`,
     * depending on the chosen specialization setting. This contract is known as the Pool's contract.
     *
     * Note that the same contract may register itself as multiple Pools with unique Pool IDs, or in other words,
     * multiple Pools may share the same contract.
     *
     * Emits a `PoolRegistered` event.
     */
    function registerPool(PoolSpecialization specialization) external returns (bytes32);

    /**
     * @dev Emitted when a Pool is registered by calling `registerPool`.
     */
    event PoolRegistered(bytes32 indexed poolId, address indexed poolAddress, PoolSpecialization specialization);

    /**
     * @dev Returns a Pool's contract address and specialization setting.
     */
    function getPool(bytes32 poolId) external view returns (address, PoolSpecialization);

    /**
     * @dev Registers `tokens` for the `poolId` Pool. Must be called by the Pool's contract.
     *
     * Pools can only interact with tokens they have registered. Users join a Pool by transferring registered tokens,
     * exit by receiving registered tokens, and can only swap registered tokens.
     *
     * Each token can only be registered once. For Pools with the Two Token specialization, `tokens` must have a length
     * of two, that is, both tokens must be registered in the same `registerTokens` call, and they must be sorted in
     * ascending order.
     *
     * The `tokens` and `assetManagers` arrays must have the same length, and each entry in these indicates the Asset
     * Manager for the corresponding token. Asset Managers can manage a Pool's tokens via `managePoolBalance`,
     * depositing and withdrawing them directly, and can even set their balance to arbitrary amounts. They are therefore
     * expected to be highly secured smart contracts with sound design principles, and the decision to register an
     * Asset Manager should not be made lightly.
     *
     * Pools can choose not to assign an Asset Manager to a given token by passing in the zero address. Once an Asset
     * Manager is set, it cannot be changed except by deregistering the associated token and registering again with a
     * different Asset Manager.
     *
     * Emits a `TokensRegistered` event.
     */
    function registerTokens(
        bytes32 poolId,
        IERC20[] memory tokens,
        address[] memory assetManagers
    ) external;

    /**
     * @dev Emitted when a Pool registers tokens by calling `registerTokens`.
     */
    event TokensRegistered(bytes32 indexed poolId, IERC20[] tokens, address[] assetManagers);

    /**
     * @dev Deregisters `tokens` for the `poolId` Pool. Must be called by the Pool's contract.
     *
     * Only registered tokens (via `registerTokens`) can be deregistered. Additionally, they must have zero total
     * balance. For Pools with the Two Token specialization, `tokens` must have a length of two, that is, both tokens
     * must be deregistered in the same `deregisterTokens` call.
     *
     * A deregistered token can be re-registered later on, possibly with a different Asset Manager.
     *
     * Emits a `TokensDeregistered` event.
     */
    function deregisterTokens(bytes32 poolId, IERC20[] memory tokens) external;

    /**
     * @dev Emitted when a Pool deregisters tokens by calling `deregisterTokens`.
     */
    event TokensDeregistered(bytes32 indexed poolId, IERC20[] tokens);

    /**
     * @dev Returns detailed information for a Pool's registered token.
     *
     * `cash` is the number of tokens the Vault currently holds for the Pool. `managed` is the number of tokens
     * withdrawn and held outside the Vault by the Pool's token Asset Manager. The Pool's total balance for `token`
     * equals the sum of `cash` and `managed`.
     *
     * Internally, `cash` and `managed` are stored using 112 bits. No action can ever cause a Pool's token `cash`,
     * `managed` or `total` balance to be greater than 2^112 - 1.
     *
     * `lastChangeBlock` is the number of the block in which `token`'s total balance was last modified (via either a
     * join, exit, swap, or Asset Manager update). This value is useful to avoid so-called 'sandwich attacks', for
     * example when developing price oracles. A change of zero (e.g. caused by a swap with amount zero) is considered a
     * change for this purpose, and will update `lastChangeBlock`.
     *
     * `assetManager` is the Pool's token Asset Manager.
     */
    function getPoolTokenInfo(bytes32 poolId, IERC20 token)
        external
        view
        returns (
            uint256 cash,
            uint256 managed,
            uint256 lastChangeBlock,
            address assetManager
        );

    /**
     * @dev Returns a Pool's registered tokens, the total balance for each, and the latest block when *any* of
     * the tokens' `balances` changed.
     *
     * The order of the `tokens` array is the same order that will be used in `joinPool`, `exitPool`, as well as in all
     * Pool hooks (where applicable). Calls to `registerTokens` and `deregisterTokens` may change this order.
     *
     * If a Pool only registers tokens once, and these are sorted in ascending order, they will be stored in the same
     * order as passed to `registerTokens`.
     *
     * Total balances include both tokens held by the Vault and those withdrawn by the Pool's Asset Managers. These are
     * the amounts used by joins, exits and swaps. For a detailed breakdown of token balances, use `getPoolTokenInfo`
     * instead.
     */
    function getPoolTokens(bytes32 poolId)
        external
        view
        returns (
            IERC20[] memory tokens,
            uint256[] memory balances,
            uint256 lastChangeBlock
        );

    /**
     * @dev Called by users to join a Pool, which transfers tokens from `sender` into the Pool's balance. This will
     * trigger custom Pool behavior, which will typically grant something in return to `recipient` - often tokenized
     * Pool shares.
     *
     * If the caller is not `sender`, it must be an authorized relayer for them.
     *
     * The `assets` and `maxAmountsIn` arrays must have the same length, and each entry indicates the maximum amount
     * to send for each asset. The amounts to send are decided by the Pool and not the Vault: it just enforces
     * these maximums.
     *
     * If joining a Pool that holds WETH, it is possible to send ETH directly: the Vault will do the wrapping. To enable
     * this mechanism, the IAsset sentinel value (the zero address) must be passed in the `assets` array instead of the
     * WETH address. Note that it is not possible to combine ETH and WETH in the same join. Any excess ETH will be sent
     * back to the caller (not the sender, which is important for relayers).
     *
     * `assets` must have the same length and order as the array returned by `getPoolTokens`. This prevents issues when
     * interacting with Pools that register and deregister tokens frequently. If sending ETH however, the array must be
     * sorted *before* replacing the WETH address with the ETH sentinel value (the zero address), which means the final
     * `assets` array might not be sorted. Pools with no registered tokens cannot be joined.
     *
     * If `fromInternalBalance` is true, the caller's Internal Balance will be preferred: ERC20 transfers will only
     * be made for the difference between the requested amount and Internal Balance (if any). Note that ETH cannot be
     * withdrawn from Internal Balance: attempting to do so will trigger a revert.
     *
     * This causes the Vault to call the `IBasePool.onJoinPool` hook on the Pool's contract, where Pools implement
     * their own custom logic. This typically requires additional information from the user (such as the expected number
     * of Pool shares). This can be encoded in the `userData` argument, which is ignored by the Vault and passed
     * directly to the Pool's contract, as is `recipient`.
     *
     * Emits a `PoolBalanceChanged` event.
     */
    function joinPool(
        bytes32 poolId,
        address sender,
        address recipient,
        JoinPoolRequest memory request
    ) external payable;

    struct JoinPoolRequest {
        IAsset[] assets;
        uint256[] maxAmountsIn;
        bytes userData;
        bool fromInternalBalance;
    }

    /**
     * @dev Called by users to exit a Pool, which transfers tokens from the Pool's balance to `recipient`. This will
     * trigger custom Pool behavior, which will typically ask for something in return from `sender` - often tokenized
     * Pool shares. The amount of tokens that can be withdrawn is limited by the Pool's `cash` balance (see
     * `getPoolTokenInfo`).
     *
     * If the caller is not `sender`, it must be an authorized relayer for them.
     *
     * The `tokens` and `minAmountsOut` arrays must have the same length, and each entry in these indicates the minimum
     * token amount to receive for each token contract. The amounts to send are decided by the Pool and not the Vault:
     * it just enforces these minimums.
     *
     * If exiting a Pool that holds WETH, it is possible to receive ETH directly: the Vault will do the unwrapping. To
     * enable this mechanism, the IAsset sentinel value (the zero address) must be passed in the `assets` array instead
     * of the WETH address. Note that it is not possible to combine ETH and WETH in the same exit.
     *
     * `assets` must have the same length and order as the array returned by `getPoolTokens`. This prevents issues when
     * interacting with Pools that register and deregister tokens frequently. If receiving ETH however, the array must
     * be sorted *before* replacing the WETH address with the ETH sentinel value (the zero address), which means the
     * final `assets` array might not be sorted. Pools with no registered tokens cannot be exited.
     *
     * If `toInternalBalance` is true, the tokens will be deposited to `recipient`'s Internal Balance. Otherwise,
     * an ERC20 transfer will be performed. Note that ETH cannot be deposited to Internal Balance: attempting to
     * do so will trigger a revert.
     *
     * `minAmountsOut` is the minimum amount of tokens the user expects to get out of the Pool, for each token in the
     * `tokens` array. This array must match the Pool's registered tokens.
     *
     * This causes the Vault to call the `IBasePool.onExitPool` hook on the Pool's contract, where Pools implement
     * their own custom logic. This typically requires additional information from the user (such as the expected number
     * of Pool shares to return). This can be encoded in the `userData` argument, which is ignored by the Vault and
     * passed directly to the Pool's contract.
     *
     * Emits a `PoolBalanceChanged` event.
     */
    function exitPool(
        bytes32 poolId,
        address sender,
        address payable recipient,
        ExitPoolRequest memory request
    ) external;

    struct ExitPoolRequest {
        IAsset[] assets;
        uint256[] minAmountsOut;
        bytes userData;
        bool toInternalBalance;
    }

    /**
     * @dev Emitted when a user joins or exits a Pool by calling `joinPool` or `exitPool`, respectively.
     */
    event PoolBalanceChanged(
        bytes32 indexed poolId,
        address indexed liquidityProvider,
        IERC20[] tokens,
        int256[] deltas,
        uint256[] protocolFeeAmounts
    );

    enum PoolBalanceChangeKind { JOIN, EXIT }

    // Swaps
    //
    // Users can swap tokens with Pools by calling the `swap` and `batchSwap` functions. To do this,
    // they need not trust Pool contracts in any way: all security checks are made by the Vault. They must however be
    // aware of the Pools' pricing algorithms in order to estimate the prices Pools will quote.
    //
    // The `swap` function executes a single swap, while `batchSwap` can perform multiple swaps in sequence.
    // In each individual swap, tokens of one kind are sent from the sender to the Pool (this is the 'token in'),
    // and tokens of another kind are sent from the Pool to the recipient in exchange (this is the 'token out').
    // More complex swaps, such as one token in to multiple tokens out can be achieved by batching together
    // individual swaps.
    //
    // There are two swap kinds:
    //  - 'given in' swaps, where the amount of tokens in (sent to the Pool) is known, and the Pool determines (via the
    // `onSwap` hook) the amount of tokens out (to send to the recipient).
    //  - 'given out' swaps, where the amount of tokens out (received from the Pool) is known, and the Pool determines
    // (via the `onSwap` hook) the amount of tokens in (to receive from the sender).
    //
    // Additionally, it is possible to chain swaps using a placeholder input amount, which the Vault replaces with
    // the calculated output of the previous swap. If the previous swap was 'given in', this will be the calculated
    // tokenOut amount. If the previous swap was 'given out', it will use the calculated tokenIn amount. These extended
    // swaps are known as 'multihop' swaps, since they 'hop' through a number of intermediate tokens before arriving at
    // the final intended token.
    //
    // In all cases, tokens are only transferred in and out of the Vault (or withdrawn from and deposited into Internal
    // Balance) after all individual swaps have been completed, and the net token balance change computed. This makes
    // certain swap patterns, such as multihops, or swaps that interact with the same token pair in multiple Pools, cost
    // much less gas than they would otherwise.
    //
    // It also means that under certain conditions it is possible to perform arbitrage by swapping with multiple
    // Pools in a way that results in net token movement out of the Vault (profit), with no tokens being sent in (only
    // updating the Pool's internal accounting).
    //
    // To protect users from front-running or the market changing rapidly, they supply a list of 'limits' for each token
    // involved in the swap, where either the maximum number of tokens to send (by passing a positive value) or the
    // minimum amount of tokens to receive (by passing a negative value) is specified.
    //
    // Additionally, a 'deadline' timestamp can also be provided, forcing the swap to fail if it occurs after
    // this point in time (e.g. if the transaction failed to be included in a block promptly).
    //
    // If interacting with Pools that hold WETH, it is possible to both send and receive ETH directly: the Vault will do
    // the wrapping and unwrapping. To enable this mechanism, the IAsset sentinel value (the zero address) must be
    // passed in the `assets` array instead of the WETH address. Note that it is possible to combine ETH and WETH in the
    // same swap. Any excess ETH will be sent back to the caller (not the sender, which is relevant for relayers).
    //
    // Finally, Internal Balance can be used when either sending or receiving tokens.

    enum SwapKind { GIVEN_IN, GIVEN_OUT }

    /**
     * @dev Performs a swap with a single Pool.
     *
     * If the swap is 'given in' (the number of tokens to send to the Pool is known), it returns the amount of tokens
     * taken from the Pool, which must be greater than or equal to `limit`.
     *
     * If the swap is 'given out' (the number of tokens to take from the Pool is known), it returns the amount of tokens
     * sent to the Pool, which must be less than or equal to `limit`.
     *
     * Internal Balance usage and the recipient are determined by the `funds` struct.
     *
     * Emits a `Swap` event.
     */
    function swap(
        SingleSwap memory singleSwap,
        FundManagement memory funds,
        uint256 limit,
        uint256 deadline
    ) external payable returns (uint256);

    /**
     * @dev Data for a single swap executed by `swap`. `amount` is either `amountIn` or `amountOut` depending on
     * the `kind` value.
     *
     * `assetIn` and `assetOut` are either token addresses, or the IAsset sentinel value for ETH (the zero address).
     * Note that Pools never interact with ETH directly: it will be wrapped to or unwrapped from WETH by the Vault.
     *
     * The `userData` field is ignored by the Vault, but forwarded to the Pool in the `onSwap` hook, and may be
     * used to extend swap behavior.
     */
    struct SingleSwap {
        bytes32 poolId;
        SwapKind kind;
        IAsset assetIn;
        IAsset assetOut;
        uint256 amount;
        bytes userData;
    }

    /**
     * @dev Performs a series of swaps with one or multiple Pools. In each individual swap, the caller determines either
     * the amount of tokens sent to or received from the Pool, depending on the `kind` value.
     *
     * Returns an array with the net Vault asset balance deltas. Positive amounts represent tokens (or ETH) sent to the
     * Vault, and negative amounts represent tokens (or ETH) sent by the Vault. Each delta corresponds to the asset at
     * the same index in the `assets` array.
     *
     * Swaps are executed sequentially, in the order specified by the `swaps` array. Each array element describes a
     * Pool, the token to be sent to this Pool, the token to receive from it, and an amount that is either `amountIn` or
     * `amountOut` depending on the swap kind.
     *
     * Multihop swaps can be executed by passing an `amount` value of zero for a swap. This will cause the amount in/out
     * of the previous swap to be used as the amount in for the current one. In a 'given in' swap, 'tokenIn' must equal
     * the previous swap's `tokenOut`. For a 'given out' swap, `tokenOut` must equal the previous swap's `tokenIn`.
     *
     * The `assets` array contains the addresses of all assets involved in the swaps. These are either token addresses,
     * or the IAsset sentinel value for ETH (the zero address). Each entry in the `swaps` array specifies tokens in and
     * out by referencing an index in `assets`. Note that Pools never interact with ETH directly: it will be wrapped to
     * or unwrapped from WETH by the Vault.
     *
     * Internal Balance usage, sender, and recipient are determined by the `funds` struct. The `limits` array specifies
     * the minimum or maximum amount of each token the vault is allowed to transfer.
     *
     * `batchSwap` can be used to make a single swap, like `swap` does, but doing so requires more gas than the
     * equivalent `swap` call.
     *
     * Emits `Swap` events.
     */
    function batchSwap(
        SwapKind kind,
        BatchSwapStep[] memory swaps,
        IAsset[] memory assets,
        FundManagement memory funds,
        int256[] memory limits,
        uint256 deadline
    ) external payable returns (int256[] memory);

    /**
     * @dev Data for each individual swap executed by `batchSwap`. The asset in and out fields are indexes into the
     * `assets` array passed to that function, and ETH assets are converted to WETH.
     *
     * If `amount` is zero, the multihop mechanism is used to determine the actual amount based on the amount in/out
     * from the previous swap, depending on the swap kind.
     *
     * The `userData` field is ignored by the Vault, but forwarded to the Pool in the `onSwap` hook, and may be
     * used to extend swap behavior.
     */
    struct BatchSwapStep {
        bytes32 poolId;
        uint256 assetInIndex;
        uint256 assetOutIndex;
        uint256 amount;
        bytes userData;
    }

    /**
     * @dev Emitted for each individual swap performed by `swap` or `batchSwap`.
     */
    event Swap(
        bytes32 indexed poolId,
        IERC20 indexed tokenIn,
        IERC20 indexed tokenOut,
        uint256 amountIn,
        uint256 amountOut
    );

    /**
     * @dev All tokens in a swap are either sent from the `sender` account to the Vault, or from the Vault to the
     * `recipient` account.
     *
     * If the caller is not `sender`, it must be an authorized relayer for them.
     *
     * If `fromInternalBalance` is true, the `sender`'s Internal Balance will be preferred, performing an ERC20
     * transfer for the difference between the requested amount and the User's Internal Balance (if any). The `sender`
     * must have allowed the Vault to use their tokens via `IERC20.approve()`. This matches the behavior of
     * `joinPool`.
     *
     * If `toInternalBalance` is true, tokens will be deposited to `recipient`'s internal balance instead of
     * transferred. This matches the behavior of `exitPool`.
     *
     * Note that ETH cannot be deposited to or withdrawn from Internal Balance: attempting to do so will trigger a
     * revert.
     */
    struct FundManagement {
        address sender;
        bool fromInternalBalance;
        address payable recipient;
        bool toInternalBalance;
    }

    /**
     * @dev Simulates a call to `batchSwap`, returning an array of Vault asset deltas. Calls to `swap` cannot be
     * simulated directly, but an equivalent `batchSwap` call can and will yield the exact same result.
     *
     * Each element in the array corresponds to the asset at the same index, and indicates the number of tokens (or ETH)
     * the Vault would take from the sender (if positive) or send to the recipient (if negative). The arguments it
     * receives are the same that an equivalent `batchSwap` call would receive.
     *
     * Unlike `batchSwap`, this function performs no checks on the sender or recipient field in the `funds` struct.
     * This makes it suitable to be called by off-chain applications via eth_call without needing to hold tokens,
     * approve them for the Vault, or even know a user's address.
     *
     * Note that this function is not 'view' (due to implementation details): the client code must explicitly execute
     * eth_call instead of eth_sendTransaction.
     */
    function queryBatchSwap(
        SwapKind kind,
        BatchSwapStep[] memory swaps,
        IAsset[] memory assets,
        FundManagement memory funds
    ) external returns (int256[] memory assetDeltas);

    // Flash Loans

    /**
     * @dev Performs a 'flash loan', sending tokens to `recipient`, executing the `receiveFlashLoan` hook on it,
     * and then reverting unless the tokens plus a proportional protocol fee have been returned.
     *
     * The `tokens` and `amounts` arrays must have the same length, and each entry in these indicates the loan amount
     * for each token contract. `tokens` must be sorted in ascending order.
     *
     * The 'userData' field is ignored by the Vault, and forwarded as-is to `recipient` as part of the
     * `receiveFlashLoan` call.
     *
     * Emits `FlashLoan` events.
     */
    function flashLoan(
        IFlashLoanRecipient recipient,
        IERC20[] memory tokens,
        uint256[] memory amounts,
        bytes memory userData
    ) external;

    /**
     * @dev Emitted for each individual flash loan performed by `flashLoan`.
     */
    event FlashLoan(IFlashLoanRecipient indexed recipient, IERC20 indexed token, uint256 amount, uint256 feeAmount);

    // Asset Management
    //
    // Each token registered for a Pool can be assigned an Asset Manager, which is able to freely withdraw the Pool's
    // tokens from the Vault, deposit them, or assign arbitrary values to its `managed` balance (see
    // `getPoolTokenInfo`). This makes them extremely powerful and dangerous. Even if an Asset Manager only directly
    // controls one of the tokens in a Pool, a malicious manager could set that token's balance to manipulate the
    // prices of the other tokens, and then drain the Pool with swaps. The risk of using Asset Managers is therefore
    // not constrained to the tokens they are managing, but extends to the entire Pool's holdings.
    //
    // However, a properly designed Asset Manager smart contract can be safely used for the Pool's benefit,
    // for example by lending unused tokens out for interest, or using them to participate in voting protocols.
    //
    // This concept is unrelated to the IAsset interface.

    /**
     * @dev Performs a set of Pool balance operations, which may be either withdrawals, deposits or updates.
     *
     * Pool Balance management features batching, which means a single contract call can be used to perform multiple
     * operations of different kinds, with different Pools and tokens, at once.
     *
     * For each operation, the caller must be registered as the Asset Manager for `token` in `poolId`.
     */
    function managePoolBalance(PoolBalanceOp[] memory ops) external;

    struct PoolBalanceOp {
        PoolBalanceOpKind kind;
        bytes32 poolId;
        IERC20 token;
        uint256 amount;
    }

    /**
     * Withdrawals decrease the Pool's cash, but increase its managed balance, leaving the total balance unchanged.
     *
     * Deposits increase the Pool's cash, but decrease its managed balance, leaving the total balance unchanged.
     *
     * Updates don't affect the Pool's cash balance, but because the managed balance changes, it does alter the total.
     * The external amount can be either increased or decreased by this call (i.e., reporting a gain or a loss).
     */
    enum PoolBalanceOpKind { WITHDRAW, DEPOSIT, UPDATE }

    /**
     * @dev Emitted when a Pool's token Asset Manager alters its balance via `managePoolBalance`.
     */
    event PoolBalanceManaged(
        bytes32 indexed poolId,
        address indexed assetManager,
        IERC20 indexed token,
        int256 cashDelta,
        int256 managedDelta
    );

    // Protocol Fees
    //
    // Some operations cause the Vault to collect tokens in the form of protocol fees, which can then be withdrawn by
    // permissioned accounts.
    //
    // There are two kinds of protocol fees:
    //
    //  - flash loan fees: charged on all flash loans, as a percentage of the amounts lent.
    //
    //  - swap fees: a percentage of the fees charged by Pools when performing swaps. For a number of reasons, including
    // swap gas costs and interface simplicity, protocol swap fees are not charged on each individual swap. Rather,
    // Pools are expected to keep track of how much they have charged in swap fees, and pay any outstanding debts to the
    // Vault when they are joined or exited. This prevents users from joining a Pool with unpaid debt, as well as
    // exiting a Pool in debt without first paying their share.

    /**
     * @dev Returns the current protocol fee module.
     */
    function getProtocolFeesCollector() external view returns (IProtocolFeesCollector);

    /**
     * @dev Safety mechanism to pause most Vault operations in the event of an emergency - typically detection of an
     * error in some part of the system.
     *
     * The Vault can only be paused during an initial time period, after which pausing is forever disabled.
     *
     * While the contract is paused, the following features are disabled:
     * - depositing and transferring internal balance
     * - transferring external balance (using the Vault's allowance)
     * - swaps
     * - joining Pools
     * - Asset Manager interactions
     *
     * Internal Balance can still be withdrawn, and Pools exited.
     */
    function setPaused(bool paused) external;

    /**
     * @dev Returns the Vault's WETH instance.
     */
    function WETH() external view returns (IWETH);
    // solhint-disable-previous-line func-name-mixedcase
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;
pragma experimental ABIEncoderV2;

import "./IVault.sol";
import "./IPoolSwapStructs.sol";

/**
 * @dev Interface for adding and removing liquidity that all Pool contracts should implement. Note that this is not
 * the complete Pool contract interface, as it is missing the swap hooks. Pool contracts should also inherit from
 * either IGeneralPool or IMinimalSwapInfoPool
 */
interface IBasePool is IPoolSwapStructs {
    /**
     * @dev Called by the Vault when a user calls `IVault.joinPool` to add liquidity to this Pool. Returns how many of
     * each registered token the user should provide, as well as the amount of protocol fees the Pool owes to the Vault.
     * The Vault will then take tokens from `sender` and add them to the Pool's balances, as well as collect
     * the reported amount in protocol fees, which the pool should calculate based on `protocolSwapFeePercentage`.
     *
     * Protocol fees are reported and charged on join events so that the Pool is free of debt whenever new users join.
     *
     * `sender` is the account performing the join (from which tokens will be withdrawn), and `recipient` is the account
     * designated to receive any benefits (typically pool shares). `balances` contains the total balances
     * for each token the Pool registered in the Vault, in the same order that `IVault.getPoolTokens` would return.
     *
     * `lastChangeBlock` is the last block in which *any* of the Pool's registered tokens last changed its total
     * balance.
     *
     * `userData` contains any pool-specific instructions needed to perform the calculations, such as the type of
     * join (e.g., proportional given an amount of pool shares, single-asset, multi-asset, etc.)
     *
     * Contracts implementing this function should check that the caller is indeed the Vault before performing any
     * state-changing operations, such as minting pool shares.
     */
    function onJoinPool(
        bytes32 poolId,
        address sender,
        address recipient,
        uint256[] memory balances,
        uint256 lastChangeBlock,
        uint256 protocolSwapFeePercentage,
        bytes memory userData
    ) external returns (uint256[] memory amountsIn, uint256[] memory dueProtocolFeeAmounts);

    /**
     * @dev Called by the Vault when a user calls `IVault.exitPool` to remove liquidity from this Pool. Returns how many
     * tokens the Vault should deduct from the Pool's balances, as well as the amount of protocol fees the Pool owes
     * to the Vault. The Vault will then take tokens from the Pool's balances and send them to `recipient`,
     * as well as collect the reported amount in protocol fees, which the Pool should calculate based on
     * `protocolSwapFeePercentage`.
     *
     * Protocol fees are charged on exit events to guarantee that users exiting the Pool have paid their share.
     *
     * `sender` is the account performing the exit (typically the pool shareholder), and `recipient` is the account
     * to which the Vault will send the proceeds. `balances` contains the total token balances for each token
     * the Pool registered in the Vault, in the same order that `IVault.getPoolTokens` would return.
     *
     * `lastChangeBlock` is the last block in which *any* of the Pool's registered tokens last changed its total
     * balance.
     *
     * `userData` contains any pool-specific instructions needed to perform the calculations, such as the type of
     * exit (e.g., proportional given an amount of pool shares, single-asset, multi-asset, etc.)
     *
     * Contracts implementing this function should check that the caller is indeed the Vault before performing any
     * state-changing operations, such as burning pool shares.
     */
    function onExitPool(
        bytes32 poolId,
        address sender,
        address recipient,
        uint256[] memory balances,
        uint256 lastChangeBlock,
        uint256 protocolSwapFeePercentage,
        bytes memory userData
    ) external returns (uint256[] memory amountsOut, uint256[] memory dueProtocolFeeAmounts);

    function getPoolId() external view returns (bytes32);
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;
pragma experimental ABIEncoderV2;

import "@balancer-labs/v2-solidity-utils/contracts/openzeppelin/IERC20.sol";

interface IAssetManager {
    /**
     * @notice Emitted when asset manager is rebalanced
     */
    event Rebalance(bytes32 poolId);

    /**
     * @notice Sets the config
     */
    function setConfig(bytes32 poolId, bytes calldata config) external;

    /**
     * Note: No function to read the asset manager config is included in IAssetManager
     * as the signature is expected to vary between asset manager implementations
     */

    /**
     * @notice Returns the asset manager's token
     */
    function getToken() external view returns (IERC20);

    /**
     * @return the current assets under management of this asset manager
     */
    function getAUM(bytes32 poolId) external view returns (uint256);

    /**
     * @return poolCash - The up-to-date cash balance of the pool
     * @return poolManaged - The up-to-date managed balance of the pool
     */
    function getPoolBalances(bytes32 poolId) external view returns (uint256 poolCash, uint256 poolManaged);

    /**
     * @return The difference in tokens between the target investment
     * and the currently invested amount (i.e. the amount that can be invested)
     */
    function maxInvestableBalance(bytes32 poolId) external view returns (int256);

    /**
     * @notice Updates the Vault on the value of the pool's investment returns
     */
    function updateBalanceOfPool(bytes32 poolId) external;

    /**
     * @notice Determines whether the pool should rebalance given the provided balances
     */
    function shouldRebalance(uint256 cash, uint256 managed) external view returns (bool);

    /**
     * @notice Rebalances funds between the pool and the asset manager to maintain target investment percentage.
     * @param poolId - the poolId of the pool to be rebalanced
     * @param force - a boolean representing whether a rebalance should be forced even when the pool is near balance
     */
    function rebalance(bytes32 poolId, bool force) external;

    /**
     * @notice allows an authorized rebalancer to remove capital to facilitate large withdrawals
     * @param poolId - the poolId of the pool to withdraw funds back to
     * @param amount - the amount of tokens to withdraw back to the pool
     */
    function capitalOut(bytes32 poolId, uint256 amount) external;
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;

import "@balancer-labs/v2-solidity-utils/contracts/openzeppelin/ERC20.sol";
import "@balancer-labs/v2-solidity-utils/contracts/openzeppelin/ERC20Permit.sol";

/**
 * @title Highly opinionated token implementation
 * @author Balancer Labs
 * @dev
 * - Includes functions to increase and decrease allowance as a workaround
 *   for the well-known issue with `approve`:
 *   https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
 * - Allows for 'infinite allowance', where an allowance of 0xff..ff is not
 *   decreased by calls to transferFrom
 * - Lets a token holder use `transferFrom` to send their own tokens,
 *   without first setting allowance
 * - Emits 'Approval' events whenever allowance is changed by `transferFrom`
 */
contract BalancerPoolToken is ERC20, ERC20Permit {
    constructor(string memory tokenName, string memory tokenSymbol)
        ERC20(tokenName, tokenSymbol)
        ERC20Permit(tokenName)
    {
        // solhint-disable-previous-line no-empty-blocks
    }

    // Overrides

    /**
     * @dev Override to allow for 'infinite allowance' and let the token owner use `transferFrom` with no self-allowance
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public override returns (bool) {
        uint256 currentAllowance = allowance(sender, msg.sender);
        _require(msg.sender == sender || currentAllowance >= amount, Errors.ERC20_TRANSFER_EXCEEDS_ALLOWANCE);

        _transfer(sender, recipient, amount);

        if (msg.sender != sender && currentAllowance != uint256(-1)) {
            // Because of the previous require, we know that if msg.sender != sender then currentAllowance >= amount
            _approve(sender, msg.sender, currentAllowance - amount);
        }

        return true;
    }

    /**
     * @dev Override to allow decreasing allowance by more than the current amount (setting it to zero)
     */
    function decreaseAllowance(address spender, uint256 amount) public override returns (bool) {
        uint256 currentAllowance = allowance(msg.sender, spender);

        if (amount >= currentAllowance) {
            _approve(msg.sender, spender, 0);
        } else {
            // No risk of underflow due to if condition
            _approve(msg.sender, spender, currentAllowance - amount);
        }

        return true;
    }

    // Internal functions

    function _mintPoolTokens(address recipient, uint256 amount) internal {
        _mint(recipient, amount);
    }

    function _burnPoolTokens(address sender, uint256 amount) internal {
        _burn(sender, amount);
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;

import "@balancer-labs/v2-solidity-utils/contracts/helpers/Authentication.sol";
import "@balancer-labs/v2-vault/contracts/interfaces/IAuthorizer.sol";

import "./BasePool.sol";

/**
 * @dev Base authorization layer implementation for Pools.
 *
 * The owner account can call some of the permissioned functions - access control of the rest is delegated to the
 * Authorizer. Note that this owner is immutable: more sophisticated permission schemes, such as multiple ownership,
 * granular roles, etc., could be built on top of this by making the owner a smart contract.
 *
 * Access control of all other permissioned functions is delegated to an Authorizer. It is also possible to delegate
 * control of *all* permissioned functions to the Authorizer by setting the owner address to `_DELEGATE_OWNER`.
 */
abstract contract BasePoolAuthorization is Authentication {
    address private immutable _owner;

    address private constant _DELEGATE_OWNER = 0xBA1BA1ba1BA1bA1bA1Ba1BA1ba1BA1bA1ba1ba1B;

    constructor(address owner) {
        _owner = owner;
    }

    function getOwner() public view returns (address) {
        return _owner;
    }

    function getAuthorizer() external view returns (IAuthorizer) {
        return _getAuthorizer();
    }

    function _canPerform(bytes32 actionId, address account) internal view override returns (bool) {
        if ((getOwner() != _DELEGATE_OWNER) && _isOwnerOnlyAction(actionId)) {
            // Only the owner can perform "owner only" actions, unless the owner is delegated.
            return msg.sender == getOwner();
        } else {
            // Non-owner actions are always processed via the Authorizer, as "owner only" ones are when delegated.
            return _getAuthorizer().canPerform(actionId, account, address(this));
        }
    }

    function _isOwnerOnlyAction(bytes32 actionId) internal view virtual returns (bool);

    function _getAuthorizer() internal view virtual returns (IAuthorizer);
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;

/**
 * @dev Interface for the TemporarilyPausable helper.
 */
interface ITemporarilyPausable {
    /**
     * @dev Emitted every time the pause state changes by `_setPaused`.
     */
    event PausedStateChanged(bool paused);

    /**
     * @dev Returns the current paused state.
     */
    function getPausedState()
        external
        view
        returns (
            bool paused,
            uint256 pauseWindowEndTime,
            uint256 bufferPeriodEndTime
        );
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.7.0;

import "../helpers/BalancerErrors.sol";

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        _require(c >= a, Errors.ADD_OVERFLOW);

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, Errors.SUB_OVERFLOW);
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, uint256 errorCode) internal pure returns (uint256) {
        _require(b <= a, errorCode);
        uint256 c = a - b;

        return c;
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;

/**
 * @dev Interface for the SignatureValidator helper, used to support meta-transactions.
 */
interface ISignaturesValidator {
    /**
     * @dev Returns the EIP712 domain separator.
     */
    function getDomainSeparator() external view returns (bytes32);

    /**
     * @dev Returns the next nonce used by an address to sign messages.
     */
    function getNextNonce(address user) external view returns (uint256);
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;

import "../openzeppelin/IERC20.sol";

/**
 * @dev Interface for WETH9.
 * See https://github.com/gnosis/canonical-weth/blob/0dd1ea3e295eef916d0c6223ec63141137d22d67/contracts/WETH9.sol
 */
interface IWETH is IERC20 {
    function deposit() external payable;

    function withdraw(uint256 amount) external;
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;

/**
 * @dev This is an empty interface used to represent either ERC20-conforming token contracts or ETH (using the zero
 * address sentinel value). We're just relying on the fact that `interface` can be used to declare new address-like
 * types.
 *
 * This concept is unrelated to a Pool's Asset Managers.
 */
interface IAsset {
    // solhint-disable-previous-line no-empty-blocks
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;

interface IAuthorizer {
    /**
     * @dev Returns true if `account` can perform the action described by `actionId` in the contract `where`.
     */
    function canPerform(
        bytes32 actionId,
        address account,
        address where
    ) external view returns (bool);
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;

// Inspired by Aave Protocol's IFlashLoanReceiver.

import "@balancer-labs/v2-solidity-utils/contracts/openzeppelin/IERC20.sol";

interface IFlashLoanRecipient {
    /**
     * @dev When `flashLoan` is called on the Vault, it invokes the `receiveFlashLoan` hook on the recipient.
     *
     * At the time of the call, the Vault will have transferred `amounts` for `tokens` to the recipient. Before this
     * call returns, the recipient must have transferred `amounts` plus `feeAmounts` for each token back to the
     * Vault, or else the entire flash loan will revert.
     *
     * `userData` is the same value passed in the `IVault.flashLoan` call.
     */
    function receiveFlashLoan(
        IERC20[] memory tokens,
        uint256[] memory amounts,
        uint256[] memory feeAmounts,
        bytes memory userData
    ) external;
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;
pragma experimental ABIEncoderV2;

import "@balancer-labs/v2-solidity-utils/contracts/openzeppelin/IERC20.sol";

import "./IVault.sol";
import "./IAuthorizer.sol";

interface IProtocolFeesCollector {
    event SwapFeePercentageChanged(uint256 newSwapFeePercentage);
    event FlashLoanFeePercentageChanged(uint256 newFlashLoanFeePercentage);

    function withdrawCollectedFees(
        IERC20[] calldata tokens,
        uint256[] calldata amounts,
        address recipient
    ) external;

    function setSwapFeePercentage(uint256 newSwapFeePercentage) external;

    function setFlashLoanFeePercentage(uint256 newFlashLoanFeePercentage) external;

    function getSwapFeePercentage() external view returns (uint256);

    function getFlashLoanFeePercentage() external view returns (uint256);

    function getCollectedFeeAmounts(IERC20[] memory tokens) external view returns (uint256[] memory feeAmounts);

    function getAuthorizer() external view returns (IAuthorizer);

    function vault() external view returns (IVault);
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;
pragma experimental ABIEncoderV2;

import "@balancer-labs/v2-solidity-utils/contracts/openzeppelin/IERC20.sol";

import "./IVault.sol";

interface IPoolSwapStructs {
    // This is not really an interface - it just defines common structs used by other interfaces: IGeneralPool and
    // IMinimalSwapInfoPool.
    //
    // This data structure represents a request for a token swap, where `kind` indicates the swap type ('given in' or
    // 'given out') which indicates whether or not the amount sent by the pool is known.
    //
    // The pool receives `tokenIn` and sends `tokenOut`. `amount` is the number of `tokenIn` tokens the pool will take
    // in, or the number of `tokenOut` tokens the Pool will send out, depending on the given swap `kind`.
    //
    // All other fields are not strictly necessary for most swaps, but are provided to support advanced scenarios in
    // some Pools.
    //
    // `poolId` is the ID of the Pool involved in the swap - this is useful for Pool contracts that implement more than
    // one Pool.
    //
    // The meaning of `lastChangeBlock` depends on the Pool specialization:
    //  - Two Token or Minimal Swap Info: the last block in which either `tokenIn` or `tokenOut` changed its total
    //    balance.
    //  - General: the last block in which *any* of the Pool's registered tokens changed its total balance.
    //
    // `from` is the origin address for the funds the Pool receives, and `to` is the destination address
    // where the Pool sends the outgoing tokens.
    //
    // `userData` is extra data provided by the caller - typically a signature from a trusted party.
    struct SwapRequest {
        IVault.SwapKind kind;
        IERC20 tokenIn;
        IERC20 tokenOut;
        uint256 amount;
        // Misc data
        bytes32 poolId;
        uint256 lastChangeBlock;
        address from;
        address to;
        bytes userData;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.7.0;

import "./ERC20.sol";
import "./IERC20Permit.sol";
import "./EIP712.sol";

/**
 * @dev Implementation of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * _Available since v3.4._
 */
abstract contract ERC20Permit is ERC20, IERC20Permit, EIP712 {
    mapping(address => uint256) private _nonces;

    // solhint-disable-next-line var-name-mixedcase
    bytes32 private immutable _PERMIT_TYPEHASH =
        keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");

    /**
     * @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `"1"`.
     *
     * It's a good idea to use the same `name` that is defined as the ERC20 token name.
     */
    constructor(string memory name) EIP712(name, "1") {}

    /**
     * @dev See {IERC20Permit-permit}.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual override {
        // solhint-disable-next-line not-rely-on-time
        _require(block.timestamp <= deadline, Errors.EXPIRED_PERMIT);

        uint256 nonce = _nonces[owner];
        bytes32 structHash = keccak256(abi.encode(_PERMIT_TYPEHASH, owner, spender, value, nonce, deadline));

        bytes32 hash = _hashTypedDataV4(structHash);

        address signer = ecrecover(hash, v, r, s);
        _require((signer != address(0)) && (signer == owner), Errors.INVALID_SIGNATURE);

        _nonces[owner] = nonce + 1;
        _approve(owner, spender, value);
    }

    /**
     * @dev See {IERC20Permit-nonces}.
     */
    function nonces(address owner) public view override returns (uint256) {
        return _nonces[owner];
    }

    /**
     * @dev See {IERC20Permit-DOMAIN_SEPARATOR}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view override returns (bytes32) {
        return _domainSeparatorV4();
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.7.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over `owner`'s tokens,
     * given `owner`'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for `permit`, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.7.0;

/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
 * thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
 * they need in their contracts using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * _Available since v3.4._
 */
abstract contract EIP712 {
    /* solhint-disable var-name-mixedcase */
    bytes32 private immutable _HASHED_NAME;
    bytes32 private immutable _HASHED_VERSION;
    bytes32 private immutable _TYPE_HASH;

    /* solhint-enable var-name-mixedcase */

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    constructor(string memory name, string memory version) {
        _HASHED_NAME = keccak256(bytes(name));
        _HASHED_VERSION = keccak256(bytes(version));
        _TYPE_HASH = keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view virtual returns (bytes32) {
        return keccak256(abi.encode(_TYPE_HASH, _HASHED_NAME, _HASHED_VERSION, _getChainId(), address(this)));
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return keccak256(abi.encodePacked("\x19\x01", _domainSeparatorV4(), structHash));
    }

    function _getChainId() private view returns (uint256 chainId) {
        // Silence state mutability warning without generating bytecode.
        // See https://github.com/ethereum/solidity/issues/10090#issuecomment-741789128 and
        // https://github.com/ethereum/solidity/issues/2691
        this;

        // solhint-disable-next-line no-inline-assembly
        assembly {
            chainId := chainid()
        }
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;

import "./BalancerErrors.sol";
import "./IAuthentication.sol";

/**
 * @dev Building block for performing access control on external functions.
 *
 * This contract is used via the `authenticate` modifier (or the `_authenticateCaller` function), which can be applied
 * to external functions to only make them callable by authorized accounts.
 *
 * Derived contracts must implement the `_canPerform` function, which holds the actual access control logic.
 */
abstract contract Authentication is IAuthentication {
    bytes32 private immutable _actionIdDisambiguator;

    /**
     * @dev The main purpose of the `actionIdDisambiguator` is to prevent accidental function selector collisions in
     * multi contract systems.
     *
     * There are two main uses for it:
     *  - if the contract is a singleton, any unique identifier can be used to make the associated action identifiers
     *    unique. The contract's own address is a good option.
     *  - if the contract belongs to a family that shares action identifiers for the same functions, an identifier
     *    shared by the entire family (and no other contract) should be used instead.
     */
    constructor(bytes32 actionIdDisambiguator) {
        _actionIdDisambiguator = actionIdDisambiguator;
    }

    /**
     * @dev Reverts unless the caller is allowed to call this function. Should only be applied to external functions.
     */
    modifier authenticate() {
        _authenticateCaller();
        _;
    }

    /**
     * @dev Reverts unless the caller is allowed to call the entry point function.
     */
    function _authenticateCaller() internal view {
        bytes32 actionId = getActionId(msg.sig);
        _require(_canPerform(actionId, msg.sender), Errors.SENDER_NOT_ALLOWED);
    }

    function getActionId(bytes4 selector) public view override returns (bytes32) {
        // Each external function is dynamically assigned an action identifier as the hash of the disambiguator and the
        // function selector. Disambiguation is necessary to avoid potential collisions in the function selectors of
        // multiple contracts.
        return keccak256(abi.encodePacked(_actionIdDisambiguator, selector));
    }

    function _canPerform(bytes32 actionId, address user) internal view virtual returns (bool);
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;

interface IAuthentication {
    /**
     * @dev Returns the action identifier associated with the external function described by `selector`.
     */
    function getActionId(bytes4 selector) external view returns (bytes32);
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;
pragma experimental ABIEncoderV2;

import "@balancer-labs/v2-solidity-utils/contracts/openzeppelin/ReentrancyGuard.sol";
import "@balancer-labs/v2-solidity-utils/contracts/helpers/WordCodec.sol";
import "@balancer-labs/v2-solidity-utils/contracts/math/Math.sol";

import "../BaseWeightedPool.sol";
import "./WeightCompression.sol";

/**
 * @dev Weighted Pool with mutable weights, designed to support V2 Liquidity Bootstrapping
 */
contract LiquidityBootstrappingPool is BaseWeightedPool, ReentrancyGuard {
    // The Pause Window and Buffer Period are timestamp-based: they should not be relied upon for sub-minute accuracy.
    // solhint-disable not-rely-on-time

    using FixedPoint for uint256;
    using WordCodec for bytes32;
    using WeightCompression for uint256;

    // LBPs often involve only two tokens - we support up to four since we're able to pack the entire config in a single
    // storage slot.
    uint256 private constant _MAX_LBP_TOKENS = 4;

    // State variables

    uint256 private immutable _totalTokens;

    IERC20 internal immutable _token0;
    IERC20 internal immutable _token1;
    IERC20 internal immutable _token2;
    IERC20 internal immutable _token3;

    // All token balances are normalized to behave as if the token had 18 decimals. We assume a token's decimals will
    // not change throughout its lifetime, and store the corresponding scaling factor for each at construction time.
    // These factors are always greater than or equal to one: tokens with more than 18 decimals are not supported.

    uint256 internal immutable _scalingFactor0;
    uint256 internal immutable _scalingFactor1;
    uint256 internal immutable _scalingFactor2;
    uint256 internal immutable _scalingFactor3;

    // For gas optimization, store start/end weights and timestamps in one bytes32
    // Start weights need to be high precision, since restarting the update resets them to "spot"
    // values. Target end weights do not need as much precision.
    // [     32 bits   |     32 bits     |      64 bits     |      124 bits      |    3 bits    |     1 bit    ]
    // [ end timestamp | start timestamp | 4x16 end weights | 4x31 start weights |   not used   | swap enabled ]
    // |MSB                                                                                                 LSB|

    bytes32 private _poolState;

    // Offsets for data elements in _poolState
    uint256 private constant _SWAP_ENABLED_OFFSET = 0;
    uint256 private constant _START_WEIGHT_OFFSET = 4;
    uint256 private constant _END_WEIGHT_OFFSET = 128;
    uint256 private constant _START_TIME_OFFSET = 192;
    uint256 private constant _END_TIME_OFFSET = 224;

    // Event declarations

    event SwapEnabledSet(bool swapEnabled);
    event GradualWeightUpdateScheduled(
        uint256 startTime,
        uint256 endTime,
        uint256[] startWeights,
        uint256[] endWeights
    );

    constructor(
        IVault vault,
        string memory name,
        string memory symbol,
        IERC20[] memory tokens,
        uint256[] memory normalizedWeights,
        uint256 swapFeePercentage,
        uint256 pauseWindowDuration,
        uint256 bufferPeriodDuration,
        address owner,
        bool swapEnabledOnStart
    )
        BaseWeightedPool(
            vault,
            name,
            symbol,
            tokens,
            new address[](tokens.length), // Pass the zero address: LBPs can't have asset managers
            swapFeePercentage,
            pauseWindowDuration,
            bufferPeriodDuration,
            owner
        )
    {
        uint256 totalTokens = tokens.length;
        InputHelpers.ensureInputLengthMatch(totalTokens, normalizedWeights.length);

        _totalTokens = totalTokens;

        // Immutable variables cannot be initialized inside an if statement, so we must do conditional assignments
        _token0 = tokens[0];
        _token1 = tokens[1];
        _token2 = totalTokens > 2 ? tokens[2] : IERC20(0);
        _token3 = totalTokens > 3 ? tokens[3] : IERC20(0);

        _scalingFactor0 = _computeScalingFactor(tokens[0]);
        _scalingFactor1 = _computeScalingFactor(tokens[1]);
        _scalingFactor2 = totalTokens > 2 ? _computeScalingFactor(tokens[2]) : 0;
        _scalingFactor3 = totalTokens > 3 ? _computeScalingFactor(tokens[3]) : 0;

        uint256 currentTime = block.timestamp;

        _startGradualWeightChange(currentTime, currentTime, normalizedWeights, normalizedWeights);

        // If false, the pool will start in the disabled state (prevents front-running the enable swaps transaction)
        _setSwapEnabled(swapEnabledOnStart);
    }

    // External functions

    /**
     * @dev Tells whether swaps are enabled or not for the given pool.
     */
    function getSwapEnabled() public view returns (bool) {
        return _poolState.decodeBool(_SWAP_ENABLED_OFFSET);
    }

    /**
     * @dev Return start time, end time, and endWeights as an array.
     * Current weights should be retrieved via `getNormalizedWeights()`.
     */
    function getGradualWeightUpdateParams()
        external
        view
        returns (
            uint256 startTime,
            uint256 endTime,
            uint256[] memory endWeights
        )
    {
        // Load current pool state from storage
        bytes32 poolState = _poolState;

        startTime = poolState.decodeUint32(_START_TIME_OFFSET);
        endTime = poolState.decodeUint32(_END_TIME_OFFSET);
        uint256 totalTokens = _getTotalTokens();
        endWeights = new uint256[](totalTokens);

        for (uint256 i = 0; i < totalTokens; i++) {
            endWeights[i] = poolState.decodeUint16(_END_WEIGHT_OFFSET + i * 16).uncompress16();
        }
    }

    /**
     * @dev Can pause/unpause trading
     */
    function setSwapEnabled(bool swapEnabled) external authenticate whenNotPaused nonReentrant {
        _setSwapEnabled(swapEnabled);
    }

    /**
     * @dev Schedule a gradual weight change, from the current weights to the given endWeights,
     * over startTime to endTime
     */
    function updateWeightsGradually(
        uint256 startTime,
        uint256 endTime,
        uint256[] memory endWeights
    ) external authenticate whenNotPaused nonReentrant {
        InputHelpers.ensureInputLengthMatch(_getTotalTokens(), endWeights.length);

        // If the start time is in the past, "fast forward" to start now
        // This avoids discontinuities in the weight curve. Otherwise, if you set the start/end times with
        // only 10% of the period in the future, the weights would immediately jump 90%
        uint256 currentTime = block.timestamp;
        startTime = Math.max(currentTime, startTime);

        _require(startTime <= endTime, Errors.GRADUAL_UPDATE_TIME_TRAVEL);

        _startGradualWeightChange(startTime, endTime, _getNormalizedWeights(), endWeights);
    }

    // Internal functions

    function _getNormalizedWeight(IERC20 token) internal view override returns (uint256) {
        uint256 i;

        // First, convert token address to a token index

        // prettier-ignore
        if (token == _token0) { i = 0; }
        else if (token == _token1) { i = 1; }
        else if (token == _token2) { i = 2; }
        else if (token == _token3) { i = 3; }
        else {
            _revert(Errors.INVALID_TOKEN);
        }

        return _getNormalizedWeightByIndex(i, _poolState);
    }

    function _getNormalizedWeightByIndex(uint256 i, bytes32 poolState) internal view returns (uint256) {
        uint256 startWeight = poolState.decodeUint31(_START_WEIGHT_OFFSET + i * 31).uncompress31();
        uint256 endWeight = poolState.decodeUint16(_END_WEIGHT_OFFSET + i * 16).uncompress16();

        uint256 pctProgress = _calculateWeightChangeProgress(poolState);

        return _interpolateWeight(startWeight, endWeight, pctProgress);
    }

    function _getNormalizedWeights() internal view override returns (uint256[] memory) {
        uint256 totalTokens = _getTotalTokens();
        uint256[] memory normalizedWeights = new uint256[](totalTokens);

        bytes32 poolState = _poolState;

        // prettier-ignore
        {
            normalizedWeights[0] = _getNormalizedWeightByIndex(0, poolState);
            normalizedWeights[1] = _getNormalizedWeightByIndex(1, poolState);
            if (totalTokens == 2) return normalizedWeights;
            normalizedWeights[2] = _getNormalizedWeightByIndex(2, poolState);
            if (totalTokens == 3) return normalizedWeights;
            normalizedWeights[3] = _getNormalizedWeightByIndex(3, poolState);
        }

        return normalizedWeights;
    }

    function _getNormalizedWeightsAndMaxWeightIndex()
        internal
        view
        override
        returns (uint256[] memory normalizedWeights, uint256 maxWeightTokenIndex)
    {
        normalizedWeights = _getNormalizedWeights();

        maxWeightTokenIndex = 0;
        uint256 maxNormalizedWeight = normalizedWeights[0];

        for (uint256 i = 1; i < normalizedWeights.length; i++) {
            if (normalizedWeights[i] > maxNormalizedWeight) {
                maxWeightTokenIndex = i;
                maxNormalizedWeight = normalizedWeights[i];
            }
        }
    }

    // Pool callback functions

    // Prevent any account other than the owner from joining the pool

    function _onInitializePool(
        bytes32 poolId,
        address sender,
        address recipient,
        uint256[] memory scalingFactors,
        bytes memory userData
    ) internal override returns (uint256, uint256[] memory) {
        // Only the owner can initialize the pool
        _require(sender == getOwner(), Errors.CALLER_IS_NOT_LBP_OWNER);

        return super._onInitializePool(poolId, sender, recipient, scalingFactors, userData);
    }

    function _onJoinPool(
        bytes32 poolId,
        address sender,
        address recipient,
        uint256[] memory balances,
        uint256 lastChangeBlock,
        uint256 protocolSwapFeePercentage,
        uint256[] memory scalingFactors,
        bytes memory userData
    )
        internal
        override
        returns (
            uint256,
            uint256[] memory,
            uint256[] memory
        )
    {
        // Only the owner can add liquidity; block public LPs
        _require(sender == getOwner(), Errors.CALLER_IS_NOT_LBP_OWNER);

        return
            super._onJoinPool(
                poolId,
                sender,
                recipient,
                balances,
                lastChangeBlock,
                protocolSwapFeePercentage,
                scalingFactors,
                userData
            );
    }

    // Swap overrides - revert unless swaps are enabled

    function _onSwapGivenIn(
        SwapRequest memory swapRequest,
        uint256 currentBalanceTokenIn,
        uint256 currentBalanceTokenOut
    ) internal view override returns (uint256) {
        _require(getSwapEnabled(), Errors.SWAPS_DISABLED);

        return super._onSwapGivenIn(swapRequest, currentBalanceTokenIn, currentBalanceTokenOut);
    }

    function _onSwapGivenOut(
        SwapRequest memory swapRequest,
        uint256 currentBalanceTokenIn,
        uint256 currentBalanceTokenOut
    ) internal view override returns (uint256) {
        _require(getSwapEnabled(), Errors.SWAPS_DISABLED);

        return super._onSwapGivenOut(swapRequest, currentBalanceTokenIn, currentBalanceTokenOut);
    }

    /**
     * @dev Extend ownerOnly functions to include the LBP control functions
     */
    function _isOwnerOnlyAction(bytes32 actionId) internal view override returns (bool) {
        return
            (actionId == getActionId(LiquidityBootstrappingPool.setSwapEnabled.selector)) ||
            (actionId == getActionId(LiquidityBootstrappingPool.updateWeightsGradually.selector)) ||
            super._isOwnerOnlyAction(actionId);
    }

    // Private functions

    /**
     * @dev Returns a fixed-point number representing how far along the current weight change is, where 0 means the
     * change has not yet started, and FixedPoint.ONE means it has fully completed.
     */
    function _calculateWeightChangeProgress(bytes32 poolState) private view returns (uint256) {
        uint256 currentTime = block.timestamp;
        uint256 startTime = poolState.decodeUint32(_START_TIME_OFFSET);
        uint256 endTime = poolState.decodeUint32(_END_TIME_OFFSET);

        if (currentTime > endTime) {
            return FixedPoint.ONE;
        } else if (currentTime < startTime) {
            return 0;
        }

        // No need for SafeMath as it was checked right above: endTime >= currentTime >= startTime
        uint256 totalSeconds = endTime - startTime;
        uint256 secondsElapsed = currentTime - startTime;

        // In the degenerate case of a zero duration change, consider it completed (and avoid division by zero)
        return totalSeconds == 0 ? FixedPoint.ONE : secondsElapsed.divDown(totalSeconds);
    }

    /**
     * @dev When calling updateWeightsGradually again during an update, reset the start weights to the current weights,
     * if necessary.
     */
    function _startGradualWeightChange(
        uint256 startTime,
        uint256 endTime,
        uint256[] memory startWeights,
        uint256[] memory endWeights
    ) internal virtual {
        bytes32 newPoolState = _poolState;

        uint256 normalizedSum = 0;
        for (uint256 i = 0; i < endWeights.length; i++) {
            uint256 endWeight = endWeights[i];
            _require(endWeight >= _MIN_WEIGHT, Errors.MIN_WEIGHT);

            newPoolState = newPoolState
                .insertUint31(startWeights[i].compress31(), _START_WEIGHT_OFFSET + i * 31)
                .insertUint16(endWeight.compress16(), _END_WEIGHT_OFFSET + i * 16);

            normalizedSum = normalizedSum.add(endWeight);
        }
        // Ensure that the normalized weights sum to ONE
        _require(normalizedSum == FixedPoint.ONE, Errors.NORMALIZED_WEIGHT_INVARIANT);

        _poolState = newPoolState.insertUint32(startTime, _START_TIME_OFFSET).insertUint32(endTime, _END_TIME_OFFSET);

        emit GradualWeightUpdateScheduled(startTime, endTime, startWeights, endWeights);
    }

    function _interpolateWeight(
        uint256 startWeight,
        uint256 endWeight,
        uint256 pctProgress
    ) private pure returns (uint256) {
        if (pctProgress == 0 || startWeight == endWeight) return startWeight;
        if (pctProgress >= FixedPoint.ONE) return endWeight;

        if (startWeight > endWeight) {
            uint256 weightDelta = pctProgress.mulDown(startWeight - endWeight);
            return startWeight.sub(weightDelta);
        } else {
            uint256 weightDelta = pctProgress.mulDown(endWeight - startWeight);
            return startWeight.add(weightDelta);
        }
    }

    function _setSwapEnabled(bool swapEnabled) private {
        _poolState = _poolState.insertBool(swapEnabled, _SWAP_ENABLED_OFFSET);
        emit SwapEnabledSet(swapEnabled);
    }

    function _getMaxTokens() internal pure override returns (uint256) {
        return _MAX_LBP_TOKENS;
    }

    function _getTotalTokens() internal view virtual override returns (uint256) {
        return _totalTokens;
    }

    function _scalingFactor(IERC20 token) internal view virtual override returns (uint256) {
        // prettier-ignore
        if (token == _token0) { return _scalingFactor0; }
        else if (token == _token1) { return _scalingFactor1; }
        else if (token == _token2) { return _scalingFactor2; }
        else if (token == _token3) { return _scalingFactor3; }
        else {
            _revert(Errors.INVALID_TOKEN);
        }
    }

    function _scalingFactors() internal view virtual override returns (uint256[] memory) {
        uint256 totalTokens = _getTotalTokens();
        uint256[] memory scalingFactors = new uint256[](totalTokens);

        // prettier-ignore
        {
            if (totalTokens > 0) { scalingFactors[0] = _scalingFactor0; } else { return scalingFactors; }
            if (totalTokens > 1) { scalingFactors[1] = _scalingFactor1; } else { return scalingFactors; }
            if (totalTokens > 2) { scalingFactors[2] = _scalingFactor2; } else { return scalingFactors; }
            if (totalTokens > 3) { scalingFactors[3] = _scalingFactor3; } else { return scalingFactors; }
        }

        return scalingFactors;
    }
}

// SPDX-License-Identifier: MIT

// Based on the ReentrancyGuard library from OpenZeppelin Contracts, altered to reduce bytecode size.
// Modifier code is inlined by the compiler, which causes its code to appear multiple times in the codebase. By using
// private functions, we achieve the same end result with slightly higher runtime gas costs, but reduced bytecode size.

pragma solidity ^0.7.0;

import "../helpers/BalancerErrors.sol";

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _enterNonReentrant();
        _;
        _exitNonReentrant();
    }

    function _enterNonReentrant() private {
        // On the first call to nonReentrant, _status will be _NOT_ENTERED
        _require(_status != _ENTERED, Errors.REENTRANCY);

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
    }

    function _exitNonReentrant() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.7.0;

import "@balancer-labs/v2-solidity-utils/contracts/math/FixedPoint.sol";

/**
 * @dev Library for compressing and uncompresing numbers by using smaller types.
 * All values are 18 decimal fixed-point numbers in the [0.0, 1.0] range,
 * so heavier compression (fewer bits) results in fewer decimals.
 */
library WeightCompression {
    uint256 private constant _UINT31_MAX = 2**(31) - 1;

    using FixedPoint for uint256;

    /**
     * @dev Convert a 16-bit value to full FixedPoint
     */
    function uncompress16(uint256 value) internal pure returns (uint256) {
        return value.mulUp(FixedPoint.ONE).divUp(type(uint16).max);
    }

    /**
     * @dev Compress a FixedPoint value to 16 bits
     */
    function compress16(uint256 value) internal pure returns (uint256) {
        return value.mulUp(type(uint16).max).divUp(FixedPoint.ONE);
    }

    /**
     * @dev Convert a 31-bit value to full FixedPoint
     */
    function uncompress31(uint256 value) internal pure returns (uint256) {
        return value.mulUp(FixedPoint.ONE).divUp(_UINT31_MAX);
    }

    /**
     * @dev Compress a FixedPoint value to 31 bits
     */
    function compress31(uint256 value) internal pure returns (uint256) {
        return value.mulUp(_UINT31_MAX).divUp(FixedPoint.ONE);
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 9999
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"contract IVault","name":"vault","type":"address"},{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"symbol","type":"string"},{"internalType":"contract IERC20[]","name":"tokens","type":"address[]"},{"internalType":"uint256[]","name":"normalizedWeights","type":"uint256[]"},{"internalType":"uint256","name":"swapFeePercentage","type":"uint256"},{"internalType":"uint256","name":"pauseWindowDuration","type":"uint256"},{"internalType":"uint256","name":"bufferPeriodDuration","type":"uint256"},{"internalType":"address","name":"owner","type":"address"},{"internalType":"bool","name":"swapEnabledOnStart","type":"bool"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"startTime","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"endTime","type":"uint256"},{"indexed":false,"internalType":"uint256[]","name":"startWeights","type":"uint256[]"},{"indexed":false,"internalType":"uint256[]","name":"endWeights","type":"uint256[]"}],"name":"GradualWeightUpdateScheduled","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"bool","name":"paused","type":"bool"}],"name":"PausedStateChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"bool","name":"swapEnabled","type":"bool"}],"name":"SwapEnabledSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"swapFeePercentage","type":"uint256"}],"name":"SwapFeePercentageChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"DOMAIN_SEPARATOR","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"selector","type":"bytes4"}],"name":"getActionId","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getAuthorizer","outputs":[{"internalType":"contract IAuthorizer","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getGradualWeightUpdateParams","outputs":[{"internalType":"uint256","name":"startTime","type":"uint256"},{"internalType":"uint256","name":"endTime","type":"uint256"},{"internalType":"uint256[]","name":"endWeights","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getInvariant","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getLastInvariant","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getNormalizedWeights","outputs":[{"internalType":"uint256[]","name":"","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getOwner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getPausedState","outputs":[{"internalType":"bool","name":"paused","type":"bool"},{"internalType":"uint256","name":"pauseWindowEndTime","type":"uint256"},{"internalType":"uint256","name":"bufferPeriodEndTime","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getPoolId","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getRate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getScalingFactors","outputs":[{"internalType":"uint256[]","name":"","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getSwapEnabled","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getSwapFeePercentage","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getVault","outputs":[{"internalType":"contract IVault","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"nonces","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"poolId","type":"bytes32"},{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256[]","name":"balances","type":"uint256[]"},{"internalType":"uint256","name":"lastChangeBlock","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"bytes","name":"userData","type":"bytes"}],"name":"onExitPool","outputs":[{"internalType":"uint256[]","name":"","type":"uint256[]"},{"internalType":"uint256[]","name":"","type":"uint256[]"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"poolId","type":"bytes32"},{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256[]","name":"balances","type":"uint256[]"},{"internalType":"uint256","name":"lastChangeBlock","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"bytes","name":"userData","type":"bytes"}],"name":"onJoinPool","outputs":[{"internalType":"uint256[]","name":"","type":"uint256[]"},{"internalType":"uint256[]","name":"","type":"uint256[]"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"enum IVault.SwapKind","name":"kind","type":"uint8"},{"internalType":"contract IERC20","name":"tokenIn","type":"address"},{"internalType":"contract IERC20","name":"tokenOut","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"bytes32","name":"poolId","type":"bytes32"},{"internalType":"uint256","name":"lastChangeBlock","type":"uint256"},{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"bytes","name":"userData","type":"bytes"}],"internalType":"struct IPoolSwapStructs.SwapRequest","name":"request","type":"tuple"},{"internalType":"uint256","name":"balanceTokenIn","type":"uint256"},{"internalType":"uint256","name":"balanceTokenOut","type":"uint256"}],"name":"onSwap","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"},{"internalType":"uint8","name":"v","type":"uint8"},{"internalType":"bytes32","name":"r","type":"bytes32"},{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"permit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"poolId","type":"bytes32"},{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256[]","name":"balances","type":"uint256[]"},{"internalType":"uint256","name":"lastChangeBlock","type":"uint256"},{"internalType":"uint256","name":"protocolSwapFeePercentage","type":"uint256"},{"internalType":"bytes","name":"userData","type":"bytes"}],"name":"queryExit","outputs":[{"internalType":"uint256","name":"bptIn","type":"uint256"},{"internalType":"uint256[]","name":"amountsOut","type":"uint256[]"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"poolId","type":"bytes32"},{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256[]","name":"balances","type":"uint256[]"},{"internalType":"uint256","name":"lastChangeBlock","type":"uint256"},{"internalType":"uint256","name":"protocolSwapFeePercentage","type":"uint256"},{"internalType":"bytes","name":"userData","type":"bytes"}],"name":"queryJoin","outputs":[{"internalType":"uint256","name":"bptOut","type":"uint256"},{"internalType":"uint256[]","name":"amountsIn","type":"uint256[]"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"},{"internalType":"bytes","name":"poolConfig","type":"bytes"}],"name":"setAssetManagerPoolConfig","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bool","name":"paused","type":"bool"}],"name":"setPaused","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bool","name":"swapEnabled","type":"bool"}],"name":"setSwapEnabled","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"swapFeePercentage","type":"uint256"}],"name":"setSwapFeePercentage","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"startTime","type":"uint256"},{"internalType":"uint256","name":"endTime","type":"uint256"},{"internalType":"uint256[]","name":"endWeights","type":"uint256[]"}],"name":"updateWeightsGradually","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

1145:1595:36:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;2138:81:18;;;:::i;:::-;;;;;;;:::i;:::-;;;;;;;;4172:164;;;;;;:::i;:::-;;:::i;:::-;;;;;;;:::i;7214:89:3:-;;;;;;:::i;:::-;;:::i;:::-;;3181:98:18;;;:::i;:::-;;;;;;;:::i;3154:363:11:-;;;:::i;:::-;;;;;;;;;:::i;21402:111:3:-;;;:::i;:::-;;;;;;;:::i;1872:655:1:-;;;;;;:::i;:::-;;:::i;3040:81:18:-;;;:::i;:::-;;;;;;;:::i;2359:113:19:-;;;:::i;6121:158:3:-;;;;;;:::i;:::-;;:::i;5737:91::-;;;:::i;5584:211:18:-;;;;;;:::i;:::-;;:::i;6790:805:35:-;;;;;;:::i;:::-;;:::i;5480:120::-;;;:::i;6709:214:3:-;;;;;;:::i;:::-;;:::i;5978:137::-;;;:::i;13897:904::-;;;;;;:::i;:::-;;:::i;:::-;;;;;;;;:::i;19751:227:32:-;;;:::i;3337:117:18:-;;;;;;:::i;:::-;;:::i;2345:393:36:-;;;;;;:::i;:::-;;:::i;:::-;;;;;;;;:::i;5764:679:35:-;;;:::i;:::-;;;;;;;;;:::i;2127:108:19:-;;;;;;:::i;:::-;;:::i;2487:430:5:-;;;;;;:::i;:::-;;:::i;12372:902:3:-;;;;;;:::i;:::-;;:::i;1776:80:4:-;;;:::i;:::-;;;;;;;:::i;5652:79:3:-;;;:::i;2332:85:18:-;;;:::i;3439:98:32:-;;;:::i;1329:1774:2:-;;;;;;:::i;:::-;;:::i;2653:429:1:-;;;;;;:::i;:::-;;:::i;3657:170:18:-;;;;;;:::i;:::-;;:::i;1862:101:4:-;;;:::i;3615:485:32:-;;;:::i;1313:753:19:-;;;;;;:::i;:::-;;:::i;1946:393:36:-;;;;;;:::i;:::-;;:::i;3885:149:18:-;;;;;;:::i;:::-;;:::i;6503:136:35:-;;;;;;:::i;:::-;;:::i;4106:120:32:-;;;:::i;2138:81:18:-;2207:5;2200:12;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;2175:13;;2200:12;;2207:5;;2200:12;;2207:5;2200:12;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;2138:81;;:::o;4172:164::-;4255:4;4271:37;4280:10;4292:7;4301:6;4271:8;:37::i;:::-;-1:-1:-1;4325:4:18;4172:164;;;;;:::o;7214:89:3:-;2156:21:5;:19;:21::i;:::-;7278:18:3::1;7289:6;7278:10;:18::i;:::-;7214:89:::0;:::o;3181:98:18:-;3260:12;;3181:98;:::o;3154:363:11:-;3257:11;3282:26;3322:27;3384:14;:12;:14::i;:::-;3383:15;3374:24;;3429;:22;:24::i;:::-;3408:45;;3485:25;:23;:25::i;:::-;3463:47;;3154:363;;;:::o;21402:111:3:-;21454:16;21489:17;:15;:17::i;:::-;21482:24;;21402:111;:::o;1872:655:1:-;2000:4;2016:24;2043:29;2053:6;2061:10;2043:9;:29::i;:::-;2016:56;-1:-1:-1;2082:101:1;2091:10;-1:-1:-1;;;;;2091:20:1;;;;:50;;;2135:6;2115:16;:26;;2091:50;8388:3:6;2082:8:1;:101::i;:::-;2194:36;2204:6;2212:9;2223:6;2194:9;:36::i;:::-;2245:10;-1:-1:-1;;;;;2245:20:1;;;;;;:55;;;2297:2;2269:16;:31;;2245:55;2241:258;;;2433:55;2442:6;2450:10;2481:6;2462:16;:25;2433:8;:55::i;:::-;2516:4;2509:11;;;1872:655;;;;;;:::o;3040:81:18:-;3105:9;;;;3040:81;:::o;2359:113:19:-;2419:7;2445:20;:18;:20::i;6121:158:3:-;2156:21:5;:19;:21::i;:::-;2970:18:11::1;:16;:18::i;:::-;6232:40:3::2;6254:17;6232:21;:40::i;5737:91::-:0;5814:7;5737:91;:::o;5584:211:18:-;5697:10;5672:4;5718:23;;;:11;:23;;;;;;;;-1:-1:-1;;;;;5718:32:18;;;;;;;;;;5672:4;;5688:79;;5709:7;;5718:48;;5755:10;5718:36;:48::i;:::-;5688:8;:79::i;6790:805:35:-;2156:21:5;:19;:21::i;:::-;2970:18:11::1;:16;:18::i;:::-;2562:20:22::2;:18;:20::i;:::-;6976:73:35::3;7012:17;:15;:17::i;:::-;7031:10;:17;6976:35;:73::i;:::-;7350:15;7387:32;7350:15:::0;7409:9;7387:8:::3;:32::i;:::-;7375:44;;7430:65;7452:7;7439:9;:20;;7281:3:6;7430:8:35;:65::i;:::-;7506:82;7532:9;7543:7;7552:23;:21;:23::i;:::-;7577:10;7506:25;:82::i;:::-;2592:1:22;2603:19:::2;:17;:19::i;:::-;6790:805:35::0;;;:::o;5480:120::-;5550:10;;5527:4;;5550:43;;5527:4;5550:21;:43::i;6709:214:3:-;2156:21:5;:19;:21::i;:::-;2970:18:11::1;:16;:18::i;:::-;6871:45:3::2;6898:5;6905:10;6871:26;:45::i;:::-;6709:214:::0;;:::o;5978:137::-;6057:9;;6031:7;;6057:51;;3333:3;6057:22;:51::i;13897:904::-;14157:13;14172:27;14211:71;14247:8;:15;14264:17;:15;:17::i;:::-;14211:35;:71::i;:::-;14293:255;14319:6;14339;14359:9;14382:8;14404:15;14433:25;14472:8;14494:11;14519:19;14293:12;:255::i;:::-;13897:904;;;;;;;;;;:::o;19751:227:32:-;19791:7;19905:66;19957:13;:11;:13::i;:::-;19905:43;19914:14;:12;:14::i;:::-;19930:17;:15;:17::i;:::-;19905:8;:43::i;:::-;:51;;:66::i;3337:117:18:-;-1:-1:-1;;;;;3429:18:18;;3403:7;3429:18;;;;;;;;;;;3337:117;;;;:::o;2345:393:36:-;2595:16;2613;2648:83;2665:6;2673;2681:9;2692:8;2702:15;2719:1;2722:8;2648:16;:83::i;:::-;2641:90;;;;2345:393;;;;;;;;;;:::o;5764:679:35:-;6044:10;;5864:17;;;;5924:27;;6077:42;6044:10;3332:3;6077:22;:42::i;:::-;6065:54;-1:-1:-1;6139:40:35;:9;3385:3;6139:22;:40::i;:::-;6129:50;;6189:19;6211:17;:15;:17::i;:::-;6189:39;;6265:11;6251:26;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;6251:26:35;;6238:39;;6293:9;6288:149;6312:11;6308:1;:15;6288:149;;;6360:66;:51;:9;3277:3;6408:2;6404:6;;6383:27;6360:22;:51::i;:::-;:64;:66::i;:::-;6344:10;6355:1;6344:13;;;;;;;;;;;;;;;;;:82;6325:3;;6288:149;;;;5764:679;;;;;:::o;2127:108:19:-;-1:-1:-1;;;;;2214:14:19;2188:7;2214:14;;;:7;:14;;;;;;;2127:108::o;2487:430:5:-;2555:7;2876:22;2900:8;2859:50;;;;;;;;;:::i;:::-;;;;;;;;;;;;;2849:61;;;;;;2842:68;;2487:430;;;:::o;12372:902:3:-;12632:14;12648:26;12686:71;12722:8;:15;12739:17;:15;:17::i;12686:71::-;12768:253;12794:6;12814;12834:9;12857:8;12879:15;12908:25;12947:8;12969:11;12994:17;12768:12;:253::i;1776:80:4:-;1843:6;1776:80;:::o;5652:79:3:-;5718:6;5652:79;:::o;2332:85:18:-;2403:7;2396:14;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;2371:13;;2396:14;;2403:7;;2396:14;;2403:7;2396:14;;;;;;;;;;;;;;;;;;;;;;;;3439:98:32;3516:14;;3439:98;:::o;1329:1774:2:-;1485:7;1504:28;1535:31;1550:7;:15;;;1535:14;:31::i;:::-;1504:62;;1576:29;1608:32;1623:7;:16;;;1608:14;:32::i;:::-;1576:64;-1:-1:-1;1671:24:2;1655:12;;:40;;;;;;;;;1651:1446;;;1840:38;1863:7;:14;;;1840:22;:38::i;:::-;1823:14;;;:55;1957:46;1966:14;1982:20;1957:8;:46::i;:::-;1940:63;;2035:48;2044:15;2061:21;2035:8;:48::i;:::-;2017:66;;2114:46;2123:7;:14;;;2139:20;2114:8;:46::i;:::-;2097:14;;;:63;2175:17;2195:56;2097:7;2219:14;2235:15;2195:14;:56::i;:::-;2175:76;;2345:48;2360:9;2371:21;2345:14;:48::i;:::-;2338:55;;;;;;;1651:1446;2488:46;2497:14;2513:20;2488:8;:46::i;:::-;2471:63;;2566:48;2575:15;2592:21;2566:8;:48::i;:::-;2548:66;;2645:47;2654:7;:14;;;2670:21;2645:8;:47::i;:::-;2628:14;;;:64;2707:16;2726:57;2628:7;2751:14;2767:15;2726;:57::i;:::-;2707:76;;2879:44;2892:8;2902:20;2879:12;:44::i;:::-;2868:55;;3059:27;3077:8;3059:17;:27::i;2653:429:1:-;2738:4;2754:24;2781:30;2791:10;2803:7;2781:9;:30::i;:::-;2754:57;;2836:16;2826:6;:26;2822:232;;2868:32;2877:10;2889:7;2898:1;2868:8;:32::i;:::-;2822:232;;;2987:56;2996:10;3008:7;3036:6;3017:16;:25;2987:8;:56::i;:::-;-1:-1:-1;3071:4:1;;2653:429;-1:-1:-1;;;2653:429:1:o;3657:170:18:-;3743:4;3759:40;3769:10;3781:9;3792:6;3759:9;:40::i;1862:101:4:-;1910:11;1940:16;:14;:16::i;3615:485:32:-;3660:7;3682:25;3713:10;:8;:10::i;:::-;-1:-1:-1;;;;;3713:24:32;;3738:11;:9;:11::i;:::-;3713:37;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;3713:37:32;;;;;;;;;;;;:::i;:::-;3679:71;;;;3881:42;3895:8;3905:17;:15;:17::i;:::-;3881:13;:42::i;:::-;3935:34;3975:40;:38;:40::i;:::-;3934:81;;;4032:61;4065:17;4084:8;4032:32;:61::i;:::-;4025:68;;;;3615:485;:::o;1313:753:19:-;1575:60;1603:8;1584:15;:27;;5606:3:6;1575:8:19;:60::i;:::-;-1:-1:-1;;;;;1662:14:19;;1646:13;1662:14;;;:7;:14;;;;;;;;;1717:68;;1662:14;;1646:13;1717:68;;1728:16;;1670:5;;1753:7;;1762:5;;1662:14;;1776:8;;1717:68;;:::i;:::-;;;;;;;;;;;;;1707:79;;;;;;1686:100;;1797:12;1812:28;1829:10;1812:16;:28::i;:::-;1797:43;;1851:14;1868:24;1878:4;1884:1;1887;1890;1868:24;;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;1868:24:19;;-1:-1:-1;;1868:24:19;;;-1:-1:-1;1902:79:19;;-1:-1:-1;;;;;;1912:20:19;;;;;;1911:43;;;1948:5;-1:-1:-1;;;;;1938:15:19;:6;-1:-1:-1;;;;;1938:15:19;;1911:43;9688:3:6;1902:8:19;:79::i;:::-;-1:-1:-1;;;;;1992:14:19;;;;;;:7;:14;;;;;2017:1;2009:9;;1992:26;;2028:31;2000:5;2044:7;2053:5;2028:8;:31::i;:::-;1313:753;;;;;;;;;;;:::o;1946:393:36:-;2196:16;2214;2249:83;2266:6;2274;2282:9;2293:8;2303:15;2320:1;2323:8;2249:16;:83::i;3885:149:18:-;-1:-1:-1;;;;;4000:18:18;;;3974:7;4000:18;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;3885:149::o;6503:136:35:-;2156:21:5;:19;:21::i;:::-;2970:18:11::1;:16;:18::i;:::-;2562:20:22::2;:18;:20::i;:::-;6604:28:35::3;6620:11;6604:15;:28::i;:::-;2603:19:22::2;:17;:19::i;4106:120:32:-:0;4161:16;4196:23;:21;:23::i;1135:274:10:-;1345:5;1369:33;1345:5;1369:19;:33::i;810:131::-;888:46;902:1;897;:6;5002:3:6;888:8:10;:46::i;4950:269:12:-;1745:11;5137:18;;5135:21;5119:37;;;;5196:15;;5174:38;;4950:269::o;948:166:15:-;1006:7;1025:37;1039:1;1034;:6;;4370:1:6;1025:8:15;:37::i;:::-;-1:-1:-1;1084:5:15;;;948:166::o;1427:142:37:-;1485:7;1511:51;893:4:13;1511:29:37;:5;1523:16;1511:11;:29::i;:::-;:35;;:51::i;1857:137::-;1915:7;1941:46;893:4:13;1941:24:37;:5;1087:11;1941;:24::i;3858:269:12:-;1586:11;4045:18;;4043:21;4027:37;;;;4104:15;;4082:38;;3858:269::o;3361:::-;1480:11;3548:18;;3546:21;3530:37;;;;3607:15;;3585:38;;3361:269::o;1157:239:13:-;1215:7;1319:5;;;1334:37;1343:6;;;;1215:7;1334:8;:37::i;4404:269:12:-;1639:11;4591:18;;4589:21;4573:37;;;;4650:15;;4628:38;;4404:269::o;2241:280::-;2356:7;1375:10;2423:17;;2421:20;2405:36;;2434:6;2489:5;:13;;2501:1;2489:13;;;2497:1;2489:13;2481:22;;:32;;2459:55;;2241:280;-1:-1:-1;;;;2241:280:12:o;1862:617:13:-;1922:7;1959:5;;;1974:57;1983:6;;;:26;;;2008:1;2003;1993:7;:11;;;;;;:16;1983:26;4467:1:6;1974:8:13;:57::i;:::-;2046:12;2042:431;;2081:1;2074:8;;;;;2042:431;893:4;2439:11;;;2438:19;;2461:1;2437:25;2430:32;;;;;2846:682;2906:7;2925:38;2934:6;;;4516:1:6;2925:8:13;:38::i;:::-;2978:6;2974:548;;-1:-1:-1;3007:1:13;3000:8;;2974:548;893:4;3059:7;;;;3080:51;;3059:1;:7;:1;3089:13;;;;;:20;4564:1:6;3080:8:13;:51::i;:::-;3505:1;3500;3488:9;:13;3487:19;;;;9345:213:18;-1:-1:-1;;;;;9468:18:18;;;;;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;;:36;;;9519:32;;;;;9498:6;;9519:32;:::i;:::-;;;;;;;;9345:213;;;:::o;2300:181:5:-;2355:16;2374:20;2386:7;;;;2374:11;:20::i;:::-;2355:39;;2404:70;2413:33;2425:8;2435:10;2413:11;:33::i;:::-;7567:3:6;2404:8:5;:70::i;3793:358:11:-;3849:6;3845:232;;;3871:81;3898:24;:22;:24::i;:::-;3880:15;:42;7669:3:6;3871:8:11;:81::i;:::-;3845:232;;;3983:83;4010:25;:23;:25::i;:::-;3992:15;:43;9099:3:6;3983:8:11;:83::i;:::-;4087:7;:16;;;;;;;;;;4118:26;;;;;;4087:16;;4118:26;:::i;:::-;;;;;;;;3793:358;:::o;4544:237::-;4591:4;4737:25;:23;:25::i;:::-;4719:15;:43;:55;;;-1:-1:-1;;4767:7:11;;;;4766:8;;4544:237::o;4894:108::-;4976:19;4894:108;:::o;5008:110::-;5091:20;5008:110;:::o;16453:715:35:-;16520:16;16548:19;16570:17;:15;:17::i;:::-;16548:39;;16597:31;16645:11;16631:26;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;16631:26:35;-1:-1:-1;16597:60:35;-1:-1:-1;16713:15:35;;16709:93;;16752:15;16732:14;16747:1;16732:17;;;;;;;;;;;;;:35;;;;;16709:93;;;16785:14;-1:-1:-1;16778:21:35;;-1:-1:-1;16778:21:35;16709:93;16833:1;16819:11;:15;16815:93;;;16858:15;16838:14;16853:1;16838:17;;;;;;;;;;;;;:35;;;;;16939:1;16925:11;:15;16921:93;;;16964:15;16944:14;16959:1;16944:17;;;;;;;;;;;;;:35;;;;;17045:1;17031:11;:15;17027:93;;;17070:15;17050:14;17065:1;17050:17;;;;;;;;;;;;;:35;;;;;17147:14;-1:-1:-1;;16453:715:35;:::o;866:101:6:-;935:9;930:34;;946:18;954:9;946:7;:18::i;7068:559:18:-;7195:71;-1:-1:-1;;;;;7204:20:18;;;;7984:3:6;7195:8:18;:71::i;:::-;7276:72;-1:-1:-1;;;;;7285:23:18;;;;8052:3:6;7276:8:18;:72::i;:::-;7359:47;7380:6;7388:9;7399:6;7359:20;:47::i;:::-;-1:-1:-1;;;;;7437:17:18;;:9;:17;;;;;;;;;;;:68;;7459:6;8530:3:6;7437:21:18;:68::i;:::-;-1:-1:-1;;;;;7417:17:18;;;:9;:17;;;;;;;;;;;:88;;;;7538:20;;;;;;;:32;;7563:6;7538:24;:32::i;:::-;-1:-1:-1;;;;;7515:20:18;;;:9;:20;;;;;;;;;;;;:55;;;;7585:35;;;;;;;;;;7613:6;;7585:35;:::i;2386:188:17:-;2447:7;2494:10;2506:12;2520:15;2537:13;:11;:13::i;:::-;2560:4;2483:83;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;2473:94;;;;;;2466:101;;2386:188;:::o;4220:98:11:-;4272:39;4281:14;:12;:14::i;:::-;7611:3:6;4272:8:11;:39::i;:::-;4220:98::o;6285:418:3:-;6361:87;2705:4;6370:17;:45;;5289:3:6;6361:8:3;:87::i;:::-;6458;2778:4;6467:17;:45;;5228:3:6;6458:8:3;:87::i;:::-;6568:9;;:70;;6591:17;3333:3;6568:22;:70::i;:::-;6556:9;:82;6653:43;;;;;;6678:17;;6653:43;:::i;2635:271:22:-;2758:48;2062:1;2767:7;;:19;;7511:3:6;2758:8:22;:48::i;:::-;2062:1;2881:7;:18;2635:271::o;15893:112:35:-;15986:12;15893:112;:::o;1495:105:15:-;1553:7;1584:1;1579;:6;;:14;;1592:1;1579:14;;;-1:-1:-1;1588:1:15;;1572:21;-1:-1:-1;1495:105:15:o;8593:768:35:-;8658:16;8686:19;8708:17;:15;:17::i;:::-;8686:39;;8735:34;8786:11;8772:26;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;8772:26:35;-1:-1:-1;8829:10:35;;8735:63;;-1:-1:-1;8914:41:35;8809:17;8829:10;8914:27;:41::i;:::-;8891:17;8909:1;8891:20;;;;;;;;;;;;;:64;;;;;8992:41;9020:1;9023:9;8992:27;:41::i;:::-;8969:17;8987:1;8969:20;;;;;;;;;;;;;:64;;;;;9051:11;9066:1;9051:16;9047:46;;;-1:-1:-1;9076:17:35;-1:-1:-1;9069:24:35;;-1:-1:-1;9069:24:35;9047:46;9130:41;9158:1;9161:9;9130:27;:41::i;:::-;9107:17;9125:1;9107:20;;;;;;;;;;;;;:64;;;;;9189:11;9204:1;9189:16;9185:46;;;-1:-1:-1;9214:17:35;-1:-1:-1;9207:24:35;;-1:-1:-1;9207:24:35;9185:46;9268:41;9296:1;9299:9;9268:27;:41::i;:::-;9245:17;9263:1;9245:20;;;;;;;;;;;;;;;;;:64;-1:-1:-1;9337:17:35;-1:-1:-1;;8593:768:35;:::o;13881:1083::-;14100:10;;14077:20;;14156:448;14180:10;:17;14176:1;:21;14156:448;;;14218:17;14238:10;14249:1;14238:13;;;;;;;;;;;;;;14218:33;;14265:53;1277:7:33;14274:9:35;:24;;5856:3:6;14265:8:35;:53::i;:::-;14348:186;14482:22;:9;:20;:22::i;:::-;14527:1;14531:2;14527:6;3277:3;14506:27;14348:103;14391:28;:12;14404:1;14391:15;;;;;;;;;;;;;;:26;:28::i;:::-;14348:12;;3224:1;14448:2;14444:6;;14421:29;14348:42;:103::i;:::-;:133;:186;:133;:186::i;:::-;14333:201;-1:-1:-1;14565:28:35;:13;14583:9;14565:17;:28::i;:::-;14549:44;-1:-1:-1;;14199:3:35;;14156:448;;;;14670:77;893:4:13;14679:13:35;:31;6201:3:6;14670:8:35;:77::i;:::-;14771:96;14841:7;3385:3;14771:56;:12;14797:9;3332:3;14771:25;:56::i;:::-;:69;:96;:69;:96::i;:::-;14758:10;:109;14883:74;;;;;;14912:9;;14923:7;;14932:12;;14946:10;;14883:74;:::i;:::-;;;;;;;;13881:1083;;;;;;:::o;2912:208:22:-;2019:1;3091:7;:22;2912:208::o;7793:143:12:-;7898:14;1375:10;7890:33;;;7889:40;;7793:143::o;6929:279:3:-;7022:14;7039:11;:9;:11::i;:::-;7022:28;;7067:20;7091:10;:8;:10::i;:::-;-1:-1:-1;;;;;7091:27:3;;7119:6;7127:5;7091:42;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;7144:57;;;;;7060:73;;-1:-1:-1;;;;;;7144:37:3;;;-1:-1:-1;7144:37:3;;-1:-1:-1;7144:57:3;;-1:-1:-1;7182:6:3;;7190:10;;7144:57;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;6929:279;;;;:::o;9131:142:12:-;9240:14;1745:11;9232:34;;9131:142::o;11072:2304:32:-;11397:19;11430:27;11471:38;11535:34;11571:27;11602:40;:38;:40::i;:::-;11534:108;;;;11812:14;:12;:14::i;:::-;11808:1137;;;12148:27;12178:61;12211:17;12230:8;12178:32;:61::i;:::-;12148:91;;12277:249;12320:8;12346:17;12381:19;12418:14;;12450:19;12487:25;12277;:249::i;:::-;12253:273;;12620:63;12635:8;12645:21;12668:14;12620;:63::i;:::-;11808:1137;;;;12916:17;:15;:17::i;:::-;12902:32;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;12902:32:32;;12878:56;;11808:1137;12983:62;12991:8;13001:17;13020:14;13036:8;12983:7;:62::i;:::-;12955:90;;-1:-1:-1;12955:90:32;-1:-1:-1;13243:60:32;13263:8;12955:90;13285:17;13243:19;:60::i;:::-;13226:14;:77;-1:-1:-1;;11072:2304:32;;;;;;;;;;;;:::o;23209:253:3:-;23326:9;23321:135;23345:17;:15;:17::i;:::-;23341:1;:21;23321:135;;;23396:49;23415:7;23423:1;23415:10;;;;;;;;;;;;;;23427:14;23442:1;23427:17;;;;;;;;;;;;;;23396:18;:49::i;:::-;23383:7;23391:1;23383:10;;;;;;;;;;;;;;;;;:62;23364:3;;23321:135;;24742:6885;25441:10;25463:4;25441:27;25437:6184;;25737:12;25763:4;-1:-1:-1;;;;;25755:18:3;25774:8;;25755:28;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;25736:47;;;26001:7;26034:1;26029:3336;;;;29525:9;26029:3336;26505:4;26502:1;26499;26484:26;26558:1;26552:8;26562:66;26548:81;26790:66;26780:77;;26774:2;;26913:16;26910:1;26907;26892:38;26969:16;26966:1;26959:27;26774:2;;28380;28374:4;28371:1;28356:27;28577:2;28571:4;28564:16;29001:2;28983:16;28979:25;28973:4;28967;28952:53;29339:2;29321:16;29317:25;29314:1;29307:36;25867:3703;29600:31;29634:17;:15;:17::i;:::-;29600:51;;29665:39;29679:8;29689:14;29665:13;:39::i;:::-;29720:17;29739:29;29774:256;29799:6;29823;29847:9;29874:8;29900:15;29933:25;29976:14;30008:8;29774:7;:256;;:::i;:::-;29719:311;;;;;30045:45;30061:12;30075:14;30045:15;:45;;:::i;:::-;30571:19;;-1:-1:-1;;30958:23:3;;30998:24;;;31244:66;31226:16;;;31219:92;30592:2;30567:28;31337:16;;;31593:2;31583:13;;31337:16;31569:28;1793:180:15;1851:7;1882:5;;;1897:51;1906:6;;;:20;;;1925:1;1920;1916;:5;;;;2485:355:13;2547:7;2566:38;2575:6;;;4516:1:6;2566:8:13;:38::i;:::-;2619:6;2615:219;;-1:-1:-1;2648:1:13;2641:8;;2615:219;893:4;2700:7;;;;2721:51;;2700:1;:7;:1;2730:13;;;2721:51;2822:1;2810:9;:13;;;;;;2803:20;;;;;10522:1197:3;10816:16;10834;10799:6;8075:68;8106:10;:8;:10::i;:::-;-1:-1:-1;;;;;8084:33:3;:10;-1:-1:-1;;;;;8084:33:3;;5392:3:6;8075:8:3;:68::i;:::-;8153:55;8172:11;:9;:11::i;:::-;8162:6;:21;9455:3:6;8153:8:3;:55::i;:::-;10862:31:::1;10896:17;:15;:17::i;:::-;10862:51;;10923:39;10937:8;10947:14;10923:13;:39::i;:::-;10974:19;10995:27;11024:38:::0;11066:224:::1;11091:6;11111;11131:9;11154:8;11176:15;11205:25;11244:14;11272:8;11066:11;:224::i;:::-;10973:317;;;;;;11396:36;11412:6;11420:11;11396:15;:36::i;:::-;11544:47;11564:10;11576:14;11544:19;:47::i;:::-;11601:58;11621:21;11644:14;11601:19;:58::i;:::-;11678:10:::0;;-1:-1:-1;11690:21:3;-1:-1:-1;;;8218:1:3::1;10522:1197:::0;;;;;;;;;;;:::o;8867:142:12:-;8976:14;1639:11;8968:34;;8867:142::o;8339:::-;8448:14;1480:11;8440:34;;8339:142::o;1210:144:37:-;1270:7;1296:51;1330:16;1296:27;:5;893:4:13;1296:11:37;:27::i;10529:868:35:-;10878:7;10899:16;10929;11032:62;11051:10;:8;:10::i;:::-;-1:-1:-1;;;;;11041:20:35;:6;-1:-1:-1;;;;;11041:20:35;;7394:3:6;11032:8:35;:62::i;:::-;11124:266;11159:6;11183;11207:9;11234:8;11260:15;11293:25;11336:14;11368:8;11124:17;:266::i;:::-;11105:285;;;;;;10529:868;;;;;;;;;;;;:::o;23993:249:3:-;24108:9;24103:133;24127:17;:15;:17::i;:::-;24123:1;:21;24103:133;;;24178:47;24195:7;24203:1;24195:10;;;;;;;;;;;;;;24207:14;24222:1;24207:17;;;;;;;;;;;;;;24178:16;:47::i;:::-;24165:7;24173:1;24165:10;;;;;;;;;;;;;;;;;:60;24146:3;;24103:133;;16011:436:35;16089:7;16148;-1:-1:-1;;;;;16139:16:35;:5;-1:-1:-1;;;;;16139:16:35;;16135:306;;;-1:-1:-1;16166:15:35;16159:22;;16135:306;16211:7;-1:-1:-1;;;;;16202:16:35;:5;-1:-1:-1;;;;;16202:16:35;;16198:243;;;-1:-1:-1;16229:15:35;16222:22;;16198:243;16274:7;-1:-1:-1;;;;;16265:16:35;:5;-1:-1:-1;;;;;16265:16:35;;16261:180;;;-1:-1:-1;16292:15:35;16285:22;;16261:180;16337:7;-1:-1:-1;;;;;16328:16:35;:5;-1:-1:-1;;;;;16328:16:35;;16324:117;;;-1:-1:-1;16355:15:35;16348:22;;16324:117;16401:29;6252:3:6;16401:7:35;:29::i;19374:283:3:-;19445:7;19556:17;19576:36;19589:22;:20;:22::i;:::-;19576:6;;:12;:36::i;:::-;19556:56;-1:-1:-1;19629:21:3;:6;19556:56;19629:10;:21::i;21675:579::-;21755:7;22206:41;22225:6;22233:13;22206:18;:41::i;11460:354:35:-;11641:7;11660:49;11669:16;:14;:16::i;:::-;7333:3:6;11660:8:35;:49::i;:::-;11727:80;11748:11;11761:21;11784:22;11727:20;:80::i;:::-;11720:87;11460:354;-1:-1:-1;;;;11460:354:35:o;22874:160:3:-;22960:7;22986:41;23005:6;23013:13;22986:18;:41::i;11820:356:35:-;12002:7;12021:49;12030:16;:14;:16::i;12021:49::-;12088:81;12110:11;12123:21;12146:22;12088:21;:81::i;23664:156:3:-;23748:7;23774:39;23791:6;23799:13;23774:16;:39::i;19027:247::-;19093:7;19211:56;19224:42;19243:22;:20;:22::i;:::-;893:4:13;;19224:18:3;:42::i;:::-;19211:6;;:12;:56::i;24248:488::-;24306:11;24703:10;:8;:10::i;:::-;-1:-1:-1;;;;;24703:24:3;;:26;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;22423:247::-;22534:9;22529:135;22553:17;:15;:17::i;:::-;22549:1;:21;22529:135;;;22604:49;22623:7;22631:1;22623:10;;;;;;;;;;;;;;22635:14;22650:1;22635:17;;;;;;;;;;;;;;22604:18;:49::i;:::-;22591:7;22599:1;22591:10;;;;;;;;;;;;;;;;;:62;22572:3;;22529:135;;9367:590:35;9481:34;9517:27;9580:23;:21;:23::i;:::-;9560:43;;9636:1;9614:23;;9647:27;9677:17;9695:1;9677:20;;;;;;;;;;;;;;9647:50;;9713:9;9725:1;9713:13;;9708:243;9732:17;:24;9728:1;:28;9708:243;;;9804:19;9781:17;9799:1;9781:20;;;;;;;;;;;;;;:42;9777:164;;;9865:1;9843:23;;9906:17;9924:1;9906:20;;;;;;;;;;;;;;9884:42;;9777:164;9758:3;;9708:243;;;;9367:590;;;:::o;2497:1048:33:-;893:4:13;2636:17:33;3330:152;3354:17;:24;3350:1;:28;3330:152;;;3411:60;3429:41;3449:17;3467:1;3449:20;;;;;;;;;;;;;;3429:8;3438:1;3429:11;;;;;;;;;;;;;;:19;;:41;;;;:::i;:::-;3411:9;;:17;:60::i;:::-;3399:72;-1:-1:-1;3380:3:33;;3330:152;;;;3492:46;3513:1;3501:9;:13;6361:3:6;3492:8:33;:46::i;3199:183:17:-;3276:7;3341:20;:18;:20::i;:::-;3363:10;3312:62;;;;;;;;;:::i;8232:2284:3:-;8526:16;8544;8509:6;8075:68;8106:10;:8;:10::i;8075:68::-;8153:55;8172:11;:9;:11::i;8153:55::-;8572:31:::1;8606:17;:15;:17::i;:::-;8572:51;;8638:13;:11;:13::i;:::-;8634:1876;;8673:20;8695:26;8725:164;8760:6;8784;8808:9;8835:14;8867:8;8725:17;:164::i;:::-;8672:217;;;;9184:58;2836:3;9193:12;:28;;5338:3:6;9184:8:3;:58::i;:::-;9256:41;9280:1;2836:3;9256:15;:41::i;:::-;9311:55;9327:9;2836:3;9338:12;:27;9311:15;:55::i;:::-;9453:44;9471:9;9482:14;9453:17;:44::i;:::-;9520:9;9545:17;:15;:17::i;:::-;9531:32;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;::::0;-1:-1:-1;9531:32:3::1;;9512:52;;;;;;;;;8634:1876;9595:39;9609:8;9619:14;9595:13;:39::i;:::-;9649:20;9671:26;9699:38:::0;9741:260:::1;9770:6;9794;9818:9;9845:8;9871:15;9904:25;9947:14;9979:8;9741:11;:260::i;:::-;9648:353;;;;;;10115:40;10131:9;10142:12;10115:15;:40::i;:::-;10242:44;10260:9;10271:14;10242:17;:44::i;:::-;10385:58;10405:21;10428:14;10385:19;:58::i;:::-;10466:9:::0;;-1:-1:-1;10477:21:3;-1:-1:-1;10458:41:3::1;::::0;-1:-1:-1;;10458:41:3::1;15597:179:35::0;15671:10;;:56;;15693:11;3169:1;15671:21;:56::i;:::-;15658:10;:69;15742:27;;;;;;15757:11;;15742:27;:::i;1415:374:10:-;1511:1;1496:5;:12;:16;1492:53;;;1528:7;;1492:53;1555:16;1574:5;1580:1;1574:8;;;;;;;;;;;;;;1555:27;;1597:9;1609:1;1597:13;;1592:191;1616:5;:12;1612:1;:16;1592:191;;;1649:15;1667:5;1673:1;1667:8;;;;;;;;;;;;;;1649:26;;1689:51;1709:7;-1:-1:-1;;;;;1698:18:10;:8;-1:-1:-1;;;;;1698:18:10;;4890:3:6;1689:8:10;:51::i;:::-;1765:7;-1:-1:-1;1630:3:10;;1592:191;;1969:544:4;2057:4;1663:42;2078:10;:8;:10::i;:::-;-1:-1:-1;;;;;2078:29:4;;;2077:63;;;;;2112:28;2131:8;2112:18;:28::i;:::-;2073:434;;;2272:10;:8;:10::i;:::-;-1:-1:-1;;;;;2258:24:4;:10;-1:-1:-1;;;;;2258:24:4;;2251:31;;;;2073:434;2435:16;:14;:16::i;:::-;-1:-1:-1;;;;;2435:27:4;;2463:8;2473:7;2490:4;2435:61;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;2428:68;;;;1074:3172:6;3593:66;3588:3;3581:79;;;3799:66;3793:4;3786:80;3941:1;3935:4;3928:15;2999:73;2210:2;2243:18;;;2288;;;2215:4;2284:29;;;3040:1;3036:14;2195:18;;;;3025:26;;;;2336:18;;;;2383;;;2379:29;;;3057:2;3053:17;3021:50;;;;2999:73;2994:3;2990:83;4008:4;4001:26;4234:3;;4224:14;1765:176:23;1842:7;1861:27;1875:1;1870;:6;;1878:9;1861:8;:27::i;:::-;-1:-1:-1;;1910:5:23;;;1765:176::o;3388:427:17:-;3790:9;;3765:44::o;8138:449:35:-;8228:7;;8269:68;:53;:9;3224:1;8319:2;8315:6;;8292:29;8269:22;:53::i;:::-;:66;:68::i;:::-;8247:90;-1:-1:-1;8347:17:35;8367:66;:51;:9;3277:3;8415:2;8411:6;;8390:27;8367:22;:51::i;:66::-;8347:86;;8444:19;8466:41;8497:9;8466:30;:41::i;:::-;8444:63;;8525:55;8544:11;8557:9;8568:11;8525:18;:55::i;:::-;8518:62;8138:449;-1:-1:-1;;;;;;8138:449:35:o;17040:1192:32:-;17331:16;17392:38;17447:17;:15;:17::i;:::-;17433:32;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;17433:32:32;-1:-1:-1;17392:73:32;-1:-1:-1;17561:30:32;17557:89;;17614:21;-1:-1:-1;17607:28:32;;17557:89;17934:252;17995:8;18004:19;17995:29;;;;;;;;;;;;;;18038:17;18056:19;18038:38;;;;;;;;;;;;;;18090:17;18121:16;18151:25;17934:47;:252::i;:::-;17889:21;17911:19;17889:42;;;;;;;;;;;;;;;;;:297;18204:21;17040:1192;-1:-1:-1;;;;;;;17040:1192:32:o;19243:320::-;19440:9;19435:122;19459:17;:15;:17::i;:::-;19455:1;:21;19435:122;;;19511:35;19520:8;19529:1;19520:11;;;;;;;;;;;;;;19533:9;19543:1;19533:12;;;;;;;;;;;;;;19511:8;:35;;:::i;:::-;19497:8;19506:1;19497:11;;;;;;;;;;;;;;;;;:49;19478:3;;19435:122;;;;19243:320;;;:::o;13382:742::-;13578:7;13587:16;13615:13;13631:19;:8;:17;:19::i;:::-;13615:35;-1:-1:-1;13673:39:32;13665:4;:47;;;;;;;;;13661:457;;;13735:65;13762:8;13772:17;13791:8;13735:26;:65::i;:::-;13728:72;;;;;;;13661:457;13829:36;13821:4;:44;;;;;;;;;13817:301;;;13888:47;13916:8;13926;13888:27;:47::i;13817:301::-;14025:82;14053:8;14063:17;14082:14;14098:8;14025:27;:82::i;13817:301::-;13382:742;;;;;;;;;:::o;18744:329::-;18917:7;18936:52;18951:8;18961:10;18973:14;18936;:52::i;:::-;19005:61;19038:17;19057:8;19005:32;:61::i;3231:104:1:-;3307:21;3313:6;3321;3307:5;:21::i;6763:1943:32:-;7110:7;7131:16;7161;2970:18:11;:16;:18::i;:::-;7268:34:32::1;7304:27;7335:40;:38;:40::i;:::-;7267:108;;;;7673:27;7703:61;7736:17;7755:8;7703:32;:61::i;:::-;7673:91;;7775:38;7816:221;7855:8;7877:17;7908:19;7941:14;;7969:19;8002:25;7816;:221::i;:::-;7775:262;;8123:63;8138:8;8148:21;8171:14;8123;:63::i;:::-;8197:20;8219:26;8249:120;8270:8;8292:17;8323:14;8351:8;8249:7;:120::i;:::-;8196:173;;;;8574:59;8594:8;8604:9;8615:17;8574:19;:59::i;:::-;8557:14;:76:::0;8652:12;;-1:-1:-1;8666:9:32;-1:-1:-1;8677:21:32;-1:-1:-1;;;;6763:1943:32;;;;;;;;;;;;:::o;1647:209:13:-;1709:7;1746:5;;;1761:57;1770:6;;;:26;;;1795:1;1790;1780:7;:11;;;;1761:57;893:4;1836:13;;;;-1:-1:-1;;;1647:209:13:o;4272:585:32:-;4475:7;2970:18:11;:16;:18::i;:::-;4574:276:32::1;4620:21;4659:41;4680:11;:19;;;4659:20;:41::i;:::-;4718:22;4758:42;4779:11;:20;;;4758;:42::i;:::-;4818:11;:18;;;4574:28;:276::i;4863:586::-:0;5067:7;2970:18:11;:16;:18::i;:::-;5166:276:32::1;5212:21;5251:41;5272:11;:19;;;5251:20;:41::i;:::-;5310:22;5350:42;5371:11;:20;;;5350;:42::i;:::-;5410:11;:18;;;5166:28;:276::i;3760:312:13:-:0;3822:7;3841:11;3855:20;3870:1;3873;3855:14;:20::i;:::-;3841:34;;3885:16;3904:42;3908:34;3914:3;975:5;3908;:34::i;:::-;3944:1;3904:3;:42::i;:::-;3885:61;;3967:8;3961:3;:14;3957:109;;;3998:1;3991:8;;;;;;3957:109;4037:18;4041:3;4046:8;4037:3;:18::i;:::-;4030:25;;;;;;10066:457:35;10273:7;10282:16;10360:62;10379:10;:8;:10::i;:::-;-1:-1:-1;;;;;10369:20:35;:6;-1:-1:-1;;;;;10369:20:35;;7394:3:6;10360:8:35;:62::i;:::-;10440:76;10464:6;10472;10480:9;10491:14;10507:8;10440:23;:76::i;:::-;10433:83;;;;10066:457;;;;;;;;:::o;3115:110:1:-;3194:24;3200:9;3211:6;3194:5;:24::i;12274:348:35:-;12352:4;12400:63;12412:50;12400:11;:63::i;:::-;12388:8;:75;12387:178;;;-1:-1:-1;12493:71:35;12505:58;12493:11;:71::i;:::-;12481:8;:83;12387:178;:228;;;;12581:34;12606:8;12581:24;:34::i;8603:142:12:-;8712:14;1586:11;8704:34;;8603:142::o;1645:139:37:-;1705:7;1731:46;1087:11;1731:27;:5;893:4:13;1731:11:37;:27::i;12870:848:35:-;12951:7;12992:15;12951:7;13037:42;:9;3332:3;13037:22;:42::i;:::-;13017:62;-1:-1:-1;13089:15:35;13107:40;:9;3385:3;13107:22;:40::i;:::-;13089:58;;13176:7;13162:11;:21;13158:141;;;893:4:13;13199:21:35;;;;;;;13158:141;13255:9;13241:11;:23;13237:62;;;13287:1;13280:8;;;;;;;13237:62;13431:19;;;13485:23;;;13638:17;;:73;;13675:36;:14;13698:12;13675:22;:36::i;:::-;13638:73;;;893:4:13;13638:73:35;13631:80;12870:848;-1:-1:-1;;;;;;;12870:848:35:o;14970:621::-;15111:7;15134:16;;;:44;;;15169:9;15154:11;:24;15134:44;15130:68;;;-1:-1:-1;15187:11:35;15180:18;;15130:68;893:4:13;15212:11:35;:29;15208:51;;-1:-1:-1;15250:9:35;15243:16;;15208:51;15288:9;15274:11;:23;15270:315;;;15313:19;15335:44;:11;15355:23;;;15335:19;:44::i;:::-;15313:66;-1:-1:-1;15400:28:35;:11;15313:66;15400:15;:28::i;:::-;15393:35;;;;;15270:315;15459:19;15481:44;:11;15501:23;;;15481:19;:44::i;:::-;15459:66;-1:-1:-1;15546:28:35;:11;15459:66;15546:15;:28::i;17156:1963:33:-;17400:7;17747:17;17727:16;:37;17723:312;;-1:-1:-1;18023:1:33;18016:8;;17723:312;18409:12;18424:41;:17;18448:16;18424:23;:41::i;:::-;18409:56;-1:-1:-1;18475:16:33;18494:40;893:4:13;18517:16:33;18494:22;:40::i;:::-;18475:59;;18871:53;18880:4;1144:6:13;18871:8:33;:53::i;:::-;18864:60;-1:-1:-1;18935:13:33;18951:20;18864:60;18962:8;18951:10;:20::i;:::-;18935:36;;18982:24;19009:35;19025:18;:5;:16;:18::i;:::-;19009:7;;:15;:35::i;:::-;18982:62;-1:-1:-1;19061:51:33;18982:62;19086:25;19061:24;:51::i;:::-;19054:58;;;;;;17156:1963;;;;;;;;:::o;1029:156:34:-;1089:25;1144:4;1133:45;;;;;;;;;;;;:::i;14130:1056:32:-;14318:7;14327:16;2970:18:11;:16;:18::i;:::-;14426:19:32::1;14447:18:::0;14469:32:::1;:8;:30;:32::i;:::-;14425:76;;;;14612:62;14634:17;:15;:17::i;:::-;14621:10;:30;4838:3:6;14612:8:32;:62::i;:::-;14762:27;14806:17;:15;:17::i;:::-;14792:32;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;::::0;-1:-1:-1;14792:32:32::1;;14762:62;;14920:216;14975:8;14984:10;14975:20;;;;;;;;;;;;;;15009:17;15027:10;15009:29;;;;;;;;;;;;;;15052:11;15077:13;:11;:13::i;:::-;15104:22;:20;:22::i;:::-;14920:41;:216::i;:::-;14895:10;14906;14895:22;;;;;;;;;::::0;;::::1;::::0;;;;;:241;15155:11;;;;-1:-1:-1;14130:1056:32;;-1:-1:-1;;;;;14130:1056:32:o;15192:910::-;15325:7;15334:16;15777:19;15799:33;:8;:31;:33::i;:::-;15777:55;;15943:27;15973:80;16016:8;16026:11;16039:13;:11;:13::i;:::-;15973:42;:80::i;:::-;16071:11;;;;-1:-1:-1;15192:910:32;;-1:-1:-1;;;;15192:910:32:o;16108:::-;16338:7;16347:16;2970:18:11;:16;:18::i;:::-;16446:27:32::1;16475:22;16501:33;:8;:31;:33::i;:::-;16445:89;;;;16544:73;16580:10;:17;16599;:15;:17::i;16544:73::-;16627:41;16641:10;16653:14;16627:13;:41::i;:::-;16679:19;16701:192;16757:8;16779:17;16810:10;16834:13;:11;:13::i;:::-;16861:22;:20;:22::i;:::-;16701:42;:192::i;:::-;16679:214;;16903:65;16927:14;16912:11;:29;;5498:3:6;16903:8:32;:65::i;:::-;16987:11:::0;17000:10;;-1:-1:-1;16108:910:32;;-1:-1:-1;;;;;;16108:910:32:o;8512:410:18:-;8587:68;-1:-1:-1;;;;;8596:21:18;;;;8182:3:6;8587:8:18;:68::i;:::-;8666:49;8687:7;8704:1;8708:6;8666:20;:49::i;:::-;-1:-1:-1;;;;;8747:18:18;;:9;:18;;;;;;;;;;;:67;;8770:6;8596:3:6;8747:22:18;:67::i;:::-;-1:-1:-1;;;;;8726:18:18;;:9;:18;;;;;;;;;;:88;8839:12;;:24;;8856:6;8839:16;:24::i;:::-;8824:12;:39;8878:37;;8904:1;;-1:-1:-1;;;;;8878:37:18;;;;;;;8908:6;;8878:37;:::i;:::-;;;;;;;;8512:410;;:::o;8712:667:32:-;8908:7;8917:16;8945:13;8961:19;:8;:17;:19::i;:::-;8945:35;-1:-1:-1;9003:36:32;8995:4;:44;;;;;;;;;8991:382;;;9062:82;9090:8;9100:17;9119:14;9135:8;9062:27;:82::i;8991:382::-;9173:35;9165:4;:43;;;;;;;;;9161:212;;;9231:65;9258:8;9268:17;9287:8;9231:26;:65::i;9161:212::-;9327:35;6309:3:6;9327:7:32;:35::i;18411:327::-;18583:7;18602:51;18617:8;18627:9;18638:14;18602;:51::i;7628:504:35:-;7704:7;7723:9;7841:7;-1:-1:-1;;;;;7832:16:35;:5;-1:-1:-1;;;;;7832:16:35;;7828:238;;;-1:-1:-1;7856:1:35;7828:238;;;7887:7;-1:-1:-1;;;;;7878:16:35;:5;-1:-1:-1;;;;;7878:16:35;;7874:192;;;-1:-1:-1;7902:1:35;7874:192;;;7933:7;-1:-1:-1;;;;;7924:16:35;:5;-1:-1:-1;;;;;7924:16:35;;7920:146;;;-1:-1:-1;7948:1:35;7920:146;;;7979:7;-1:-1:-1;;;;;7970:16:35;:5;-1:-1:-1;;;;;7970:16:35;;7966:100;;;-1:-1:-1;7994:1:35;7966:100;;;8026:29;6252:3:6;8026:7:35;:29::i;:::-;8083:42;8111:1;8114:10;;8083:27;:42::i;3681:1761:33:-;3869:7;5093:75;5114:32;:9;1806:6;5114:17;:32::i;:::-;5102:8;:44;;5961:3:6;5093:8:33;:75::i;:::-;5179:19;5201:23;:9;5215:8;5201:13;:23::i;:::-;5179:45;-1:-1:-1;5234:12:33;5249:28;:9;5179:45;5249:15;:28::i;:::-;5234:43;-1:-1:-1;5287:16:33;5306:27;:8;5323:9;5306:16;:27::i;:::-;5287:46;-1:-1:-1;5343:13:33;5359:20;:4;5287:46;5359:10;:20::i;:::-;5343:36;;5397:38;5416:18;:5;:16;:18::i;:::-;5397:10;;:18;:38::i;5580:1920::-;5769:7;6974:79;6996:34;:10;1861:6;6996:18;:34::i;:::-;6983:9;:47;;6012:3:6;6974:8:33;:79::i;:::-;7064:12;7079:43;7096:25;:10;7111:9;7096:14;:25::i;:::-;7079:10;;:16;:43::i;:::-;7064:58;-1:-1:-1;7132:16:33;7151:25;:9;7167:8;7151:15;:25::i;:::-;7132:44;-1:-1:-1;7186:13:33;7202:20;:4;7132:44;7202:10;:20::i;:::-;7186:36;-1:-1:-1;7412:13:33;7428:25;7186:36;893:4:13;7428:9:33;:25::i;:::-;7412:41;-1:-1:-1;7471:22:33;:9;7412:41;7471:15;:22::i;4865:2192:14:-;4923:7;4946:6;4942:131;;-1:-1:-1;1935:4:14;5040:22;;4942:131;5087:6;5083:45;;-1:-1:-1;5116:1:14;5109:8;;5083:45;5498:44;5511:6;5507:1;:10;4615:1:6;5498:8:14;:44::i;:::-;5577:1;5933:57;3078:24;5942:23;;4666:1:6;5933:8:14;:57::i;:::-;6025:1;6000:15;2964:13;6071:28;-1:-1:-1;6071:60:14;;;;-1:-1:-1;3019:13:14;6103:28;;6071:60;6067:684;;;6147:14;6164:16;6171:8;6164:6;:16::i;:::-;6147:33;-1:-1:-1;1935:4:14;6631:16;;;6630:29;;6629:40;6618:8;1935:4;6598:7;:16;6597:29;:72;6581:89;;6067:684;;;;6732:8;6716:13;6720:8;6716:3;:13::i;:::-;:24;6701:39;;6067:684;1935:4;6760:22;;6856:150;2771:6;6878:36;-1:-1:-1;6878:36:14;;;:76;;;2720:6;6918:12;:36;;6878:76;4723:1:6;6856:8:14;:150::i;:::-;7032:17;7036:12;7032:3;:17::i;5474:1270:32:-;5679:7;5688:16;2970:18:11;:16;:18::i;:::-;5871:13:32::1;5887:19;:8;:17;:19::i;:::-;5871:35:::0;-1:-1:-1;5916:53:32::1;5933:13;5925:4;:21;;;;;;;;;5443:3:6;5916:8:32;:53::i;:::-;5980:26;6009:27;:8;:25;:27::i;:::-;5980:56;;6046:72;6082:17;:15;:17::i;6046:72::-;6128:40;6142:9;6153:14;6128:13;:40::i;:::-;6180:34;6220:40;:38;:40::i;:::-;6179:81;;;6271:26;6300:62;6333:17;6352:9;6300:32;:62::i;:::-;6271:91;;6578:20;6601:47;6610:18;6630:17;:15;:17::i;6601:47::-;6659:14;:35:::0;;;;-1:-1:-1;6659:35:32;6727:9;;-1:-1:-1;5474:1270:32;;-1:-1:-1;;;;;;;;5474:1270:32:o;7898:294:18:-;7973:49;8002:1;8006:7;8015:6;7973:20;:49::i;:::-;8048:12;;:24;;8065:6;8048:16;:24::i;:::-;8033:12;:39;-1:-1:-1;;;;;8103:18:18;;:9;:18;;;;;;;;;;;:30;;8126:6;8103:22;:30::i;:::-;-1:-1:-1;;;;;8082:18:18;;:9;:18;;;;;;;;;;;:51;;;;8148:37;;8082:18;;:9;8148:37;;;;8178:6;;8148:37;:::i;7309:271:3:-;7395:4;7443:47;7455:34;7443:11;:47::i;:::-;7431:8;:59;7430:143;;;-1:-1:-1;7520:52:3;7532:39;7520:11;:52::i;:::-;7508:64;;;;7309:271;-1:-1:-1;7309:271:3:o;4302:227:13:-;4362:7;4381:11;4395:20;4410:1;4413;4395:14;:20::i;:::-;4381:34;;4425:16;4444:42;4448:34;4454:3;975:5;4448;:34::i;4444:42::-;4425:61;;4504:18;4508:3;4513:8;4504:3;:18::i;4812:112::-;4866:7;893:4;4893:1;:7;4892:25;;4916:1;4892:25;;;-1:-1:-1;893:4:13;4905:7;;4812:112::o;1918:224:34:-;1991:19;2012:18;2083:4;2072:63;;;;;;;;;;;;:::i;:::-;2042:93;;;;-1:-1:-1;1918:224:34;-1:-1:-1;;;1918:224:34:o;13136:2561:33:-;13358:7;;14501:53;14539:14;14501:31;14539:14;14520:11;14501:18;:31::i;:53::-;14476:78;;14564:81;2218:6;14573:14;:38;;6074:3:6;14564:8:33;:81::i;:::-;14747:20;14770:62;14791:40;893:4:13;14814:16:33;14791:22;:40::i;:::-;14770:14;;:20;:62::i;:::-;14747:85;;14951:27;14981:42;14997:25;:12;:23;:25::i;:::-;14981:7;;:15;:42::i;:::-;14951:72;;15179:25;15207:29;:16;:27;:29::i;:::-;15179:57;-1:-1:-1;15447:21:33;15471:44;:19;15179:57;15471:25;:44::i;:::-;15447:68;-1:-1:-1;15525:24:33;15552:38;:19;15447:68;15552:23;:38::i;:::-;15525:65;-1:-1:-1;15608:82:33;15629:60;15651:37;893:4:13;15670:17:33;15651:18;:37::i;:::-;15629:13;;:21;:60::i;:::-;15608:16;;:20;:82::i;:::-;15601:89;13136:2561;-1:-1:-1;;;;;;;;;;;;13136:2561:33:o;2148:184:34:-;2222:19;2282:4;2271:54;;;;;;;;;;;;:::i;15703:1447:33:-;15861:16;16871;16890:29;:11;16910:8;16890:19;:29::i;:::-;16871:48;;16930:27;16974:8;:15;16960:30;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;16960:30:33;;16930:60;;17005:9;17000:116;17024:8;:15;17020:1;:19;17000:116;;;17076:29;17096:8;17076;17085:1;17076:11;;;;;;;;;;;;;;:19;;:29;;;;:::i;:::-;17060:10;17071:1;17060:13;;;;;;;;;;;;;;;;;:45;17041:3;;17000:116;;;-1:-1:-1;17133:10:33;15703:1447;-1:-1:-1;;;;;15703:1447:33:o;2338:270:34:-;2436:27;2465:22;2547:4;2536:65;;;;;;;;;;;;:::i;11316:1814:33:-;11567:7;11630:40;11687:10;:17;11673:32;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;11673:32:33;;11630:75;;11715:33;11767:9;11762:306;11786:8;:15;11782:1;:19;11762:306;;;11851:49;11888:8;11897:1;11888:11;;;;;;;;;;;;;;11851:30;11867:10;11878:1;11867:13;;;;;;;;;;;;;;11851:8;11860:1;11851:11;;;;;;;;;;;;;;:15;;:30;;;;:::i;:49::-;11822:23;11846:1;11822:26;;;;;;;;;;;;;:78;;;;;11942:115;11989:54;12022:17;12040:1;12022:20;;;;;;;;;;;;;;11989:23;12013:1;11989:26;;;;;;;;;;;;;;:32;;:54;;;;:::i;:::-;11942:25;;:29;:115::i;:::-;11914:143;-1:-1:-1;11803:3:33;;11762:306;;;-1:-1:-1;893:4:13;12078:22:33;12127:930;12151:8;:15;12147:1;:19;12127:930;;;12375:24;12445:23;12469:1;12445:26;;;;;;;;;;;;;;12417:25;:54;12413:444;;;12491:24;12518:59;12538:38;:25;:36;:38::i;:::-;12518:8;12527:1;12518:11;;;;;;;:59;12491:86;;12595:21;12619:35;12637:16;12619:10;12630:1;12619:13;;;;;;;:35;12595:59;-1:-1:-1;12691:80:33;12712:58;12732:37;893:4:13;12751:17:33;12732:18;:37::i;12691:80::-;12672:99;;12413:444;;;;;12829:10;12840:1;12829:13;;;;;;;;;;;;;;12810:32;;12413:444;12871:20;12894:54;12936:8;12945:1;12936:11;;;;;;;;;;;;;;12894:33;12910:16;12894:8;12903:1;12894:11;;;;;;;:54;12871:77;;12980:66;13003:42;13024:17;13042:1;13024:20;;;;;;;;;;;;;;13003:12;:20;;:42;;;;:::i;:::-;12980:14;;:22;:66::i;:::-;12963:83;-1:-1:-1;;;12168:3:33;;12127:930;;;;13074:49;13095:27;:14;:25;:27::i;:::-;13074:14;;:20;:49::i;:::-;13067:56;11316:1814;-1:-1:-1;;;;;;;;;11316:1814:33:o;1353:121:23:-;1411:7;1437:30;1441:1;1444;4370::6;1437:3:23;:30::i;9385:829:32:-;9601:7;9610:16;9639:26;9667:23;9694:33;:8;:31;:33::i;:::-;9638:89;;;;9737:72;9773:17;:15;:17::i;:::-;9792:9;:16;9737:35;:72::i;:::-;9820:40;9834:9;9845:14;9820:13;:40::i;:::-;9871:20;9894:191;9950:8;9972:17;10003:9;10026:13;:11;:13::i;:::-;10053:22;:20;:22::i;:::-;9894:42;:191::i;:::-;9871:214;;10096:68;10121:15;10105:12;:31;;5554:3:6;10096:8:32;:68::i;10220:833::-;10394:7;10403:16;10432:20;10454:18;10476:32;:8;:30;:32::i;:::-;10431:77;;;;10618:62;10640:17;:15;:17::i;10618:62::-;10691:26;10734:17;:15;:17::i;:::-;10720:32;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;10720:32:32;;10691:61;;10786:217;10841:8;10850:10;10841:20;;;;;;;;;;;;;;10875:17;10893:10;10875:29;;;;;;;;;;;;;;10918:12;10944:13;:11;:13::i;:::-;10971:22;:20;:22::i;:::-;10786:41;:217::i;19376:1714:14:-;1935:4;19646:11;19424:6;;2160:4;20056:10;;;;20031;;;20030:21;20056:10;20029:38;;;;;;-1:-1:-1;20077:16:14;2160:4;20097:5;;;20096:16;;-1:-1:-1;20206:1:14;;2160:4;20421:15;;;20420:26;;-1:-1:-1;20475:1:14;20420:26;20469:7;20456:20;2160:4;20494:15;;;20493:26;;-1:-1:-1;20548:1:14;20493:26;20542:7;20529:20;2160:4;20567:15;;;20566:26;;-1:-1:-1;20621:1:14;20566:26;20615:7;20602:20;2160:4;20640:15;;;20639:26;;-1:-1:-1;20694:1:14;20639:26;20688:7;20675:20;2160:4;20713:15;;;20712:26;;-1:-1:-1;20767:2:14;20712:26;20761:8;20748:21;2160:4;20787:15;;;20786:26;;-1:-1:-1;20841:2:14;20786:26;20835:8;20822:21;2160:4;20861:15;;;20860:26;;-1:-1:-1;20915:2:14;20860:26;21082:1;20909:8;;;20896:21;;;;21070:13;;19376:1714;-1:-1:-1;;;;;19376:1714:14:o;14151:4959::-;14196:6;1935:4;14218:1;:10;14214:382;;;14558:26;14582:1;14563:15;14582:1;14562:21;;;;;14558:3;:26::i;:::-;14557:27;;14549:36;;;;14214:382;15921:10;15954:11;15949:16;;15945:114;;3214:56;15981:7;;;-1:-1:-1;3158:21:14;16039:9;15945:114;16078:11;16073:16;;16069:114;;3377:28;16105:7;;;-1:-1:-1;3322:20:14;16163:9;16069:114;16321:3;16334:8;;;;16314:10;3543:34;16469:7;;16465:82;;3543:34;2125:4;16497:10;;16496:17;;-1:-1:-1;3486:22:14;16527:9;16465:82;3672:27;16561:1;:7;16557:82;;3672:27;2125:4;16589:10;;16588:17;;-1:-1:-1;3615:22:14;16619:9;16557:82;3793:24;16653:1;:7;16649:82;;3793:24;2125:4;16681:10;;16680:17;;-1:-1:-1;3737:21:14;16711:9;16649:82;3911:22;16745:1;:7;16741:82;;3911:22;2125:4;16773:10;;16772:17;;-1:-1:-1;3855:21:14;16803:9;16741:82;4027:21;16837:1;:7;16833:82;;4027:21;2125:4;16865:10;;16864:17;;-1:-1:-1;3971:21:14;16895:9;16833:82;4142:21;16929:1;:7;16925:82;;4142:21;2125:4;16957:10;;;16956:17;;16987:9;16925:82;4257:21;17021:1;:7;17017:82;;4257:21;2125:4;17049:10;;17048:17;;-1:-1:-1;4201:20:14;17079:9;17017:82;4372:21;17113:1;:7;17109:82;;4372:21;2125:4;17141:10;;17140:17;;-1:-1:-1;4316:20:14;17171:9;17109:82;4489:21;17205:1;:8;17201:85;;4489:21;2125:4;17234:10;;17233:18;;-1:-1:-1;4432:20:14;17265:10;17201:85;4606:21;17300:1;:8;17296:85;;4606:21;2125:4;17329:10;;17328:18;;-1:-1:-1;4550:19:14;17360:10;17296:85;17883:8;2125:4;17921:1;:10;2125:4;;17896:1;:10;17895:21;17894:38;;;;;;;-1:-1:-1;17942:16:14;2125:4;17962:5;;;17961:16;;-1:-1:-1;18071:1:14;;2125:4;18286:15;;;18285:26;;-1:-1:-1;18340:1:14;18285:26;18334:7;18321:20;2125:4;18359:15;;;18358:26;;-1:-1:-1;18413:1:14;18358:26;18407:7;18394:20;2125:4;18432:15;;;18431:26;;-1:-1:-1;18486:1:14;18431:26;18480:7;18467:20;2125:4;18505:15;;;18504:26;;-1:-1:-1;18559:1:14;18504:26;18553:7;18540:20;2125:4;18578:15;;;18577:26;;-1:-1:-1;18632:2:14;18577:26;18626:8;18613:21;18806:1;18793:14;19100:3;19081:15;;;19080:23;;14151:4959;-1:-1:-1;;;;;;;14151:4959:14:o;7271:5379::-;7317:6;7335:89;2771:6;7344:1;:25;;:54;;;;;2720:6;7373:1;:25;;7344:54;4775:1:6;7335:8:14;:89::i;:::-;7443:1;7439;:5;7435:353;;;7769:7;7774:1;7773:2;;7769:3;:7::i;:::-;7750:15;7749:27;;;;;;7741:36;;;;7435:353;9089:14;3158:21;9117:1;:7;9113:220;;-1:-1:-1;9140:7:14;;;;;3214:56;9113:220;;;3322:20;9194:1;:7;9190:143;;-1:-1:-1;9217:7:14;;;;;3377:28;9190:143;;;-1:-1:-1;9291:1:14;9190:143;9488:3;9483:8;;;;;2125:4;3486:22;9742:7;;9738:92;;9765:7;;;;;2125:4;3543:34;9797:12;;9796:23;9786:33;;9738:92;3615:22;9843:1;:7;9839:92;;9866:7;;;;;2125:4;3672:27;9898:12;;9897:23;9887:33;;9839:92;3737:21;9944:1;:7;9940:92;;9967:7;;;;;2125:4;3793:24;9999:12;;9998:23;9988:33;;9940:92;3855:21;10045:1;:7;10041:92;;10068:7;;;;;2125:4;3911:22;10100:12;;10099:23;10089:33;;10041:92;3971:21;10146:1;:7;10142:92;;10169:7;;;;;2125:4;4027:21;10201:12;;10200:23;10190:33;;10142:92;4086:21;10247:1;:7;10243:92;;10270:7;;;;;4086:21;4142;10302:12;;10301:23;10291:33;;10243:92;4201:20;10348:1;:7;10344:92;;10371:7;;;;;2125:4;4257:21;10403:12;;10402:23;10392:33;;10344:92;4316:20;10449:1;:7;10445:92;;10472:7;;;;;2125:4;4372:21;10504:12;;10503:23;10493:33;;10445:92;2125:4;11069:17;;;;;;11354:1;;11332:8;;;11331:19;11330:25;11365:17;;;;11330:25;-1:-1:-1;11424:1:14;2125:4;11402:8;;;11401:19;11400:25;11435:17;;;;11400:25;-1:-1:-1;11494:1:14;2125:4;11472:8;;;11471:19;11470:25;11505:17;;;;11470:25;-1:-1:-1;11564:1:14;2125:4;11542:8;;;11541:19;11540:25;11575:17;;;;11540:25;-1:-1:-1;11634:1:14;2125:4;11612:8;;;11611:19;11610:25;11645:17;;;;11610:25;-1:-1:-1;11704:1:14;2125:4;11682:8;;;11681:19;11680:25;11715:17;;;;11680:25;-1:-1:-1;11774:1:14;2125:4;11752:8;;;11751:19;11750:25;11785:17;;;;11750:25;-1:-1:-1;11844:1:14;2125:4;11822:8;;;11821:19;11820:25;11855:17;;;;11820:25;-1:-1:-1;11914:2:14;2125:4;11892:8;;;11891:19;11890:26;11926:17;;;;11890:26;-1:-1:-1;11985:2:14;2125:4;11963:8;;;11962:19;11961:26;11997:17;;;;11961:26;-1:-1:-1;12056:2:14;2125:4;12034:8;;;12033:19;12032:26;12068:17;;;;12032:26;-1:-1:-1;12640:3:14;2125:4;12596:19;;;12595:30;12594:42;;12593:50;;7271:5379;-1:-1:-1;;;;;;7271:5379:14:o;1205:185:34:-;1273:26;1338:4;1327:56;;;;;;;;;;;;:::i;7506:1699:33:-;7756:7;7822:37;7876:9;:16;7862:31;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;7862:31:33;;7822:71;;7904:30;7953:9;7948:267;7972:8;:15;7968:1;:19;7948:267;;;8034:50;8072:8;8081:1;8072:11;;;;;;;;;;;;;;8034:29;8050:9;8060:1;8050:12;;;;;;;;;;;;;;8034:8;8043:1;8034:11;;;;;;;;;;;;;;:15;;:29;;;;:::i;:50::-;8008:20;8029:1;8008:23;;;;;;;;;;;;;:76;;;;;8123:81;8150:53;8182:17;8200:1;8182:20;;;;;;;;;;;;;;8150;8171:1;8150:23;;;;;;;8123:81;8098:106;-1:-1:-1;7989:3:33;;7948:267;;;-1:-1:-1;893:4:13;8225:22:33;8274:749;8298:8;:15;8294:1;:19;8274:749;;;8334:26;8405:22;8379:20;8400:1;8379:23;;;;;;;;;;;;;;:48;8375:446;;;8447:24;8474:63;8494:42;:22;893:4:13;8494:26:33;:42::i;8474:63::-;8447:90;;8555:21;8579:34;8596:16;8579:9;8589:1;8579:12;;;;;;;:34;8555:58;-1:-1:-1;8652:82:33;8673:60;8695:37;893:4:13;8714:17:33;8695:18;:37::i;8652:82::-;8631:103;;8375:446;;;;;8794:9;8804:1;8794:12;;;;;;;;;;;;;;8773:33;;8375:446;8835:20;8858:56;8902:8;8911:1;8902:11;;;;;;;;;;;;;;8858:35;8874:18;8858:8;8867:1;8858:11;;;;;;;:56;8835:79;;8946:66;8969:42;8990:17;9008:1;8990:20;;;;;;;8946:66;8929:83;-1:-1:-1;;;8315:3:33;;8274:749;;;;893:4:13;9037:14:33;:31;9033:166;;;9091:58;9114:34;:14;893:4:13;9114:18:33;:34::i;:::-;9091:14;;:22;:58::i;:::-;9084:65;;;;;;;9033:166;9187:1;9180:8;;;;;;;9211:2099;9434:7;;10421:54;10460:14;10421:32;10460:14;10440:12;10421:18;:32::i;:54::-;10396:79;;10485:81;2041:4;10494:14;:38;;6136:3:6;10485:8:33;:81::i;:::-;10672:20;10695:60;10716:38;893:4:13;10737:16:33;10716:20;:38::i;10695:60::-;10672:83;-1:-1:-1;10766:26:33;10795:47;10809:32;10672:83;893:4:13;10809:16:33;:32::i;:::-;10795:7;;:13;:47::i;:::-;10766:76;;10997:25;11025:29;:16;:27;:29::i;:::-;10997:57;-1:-1:-1;11064:21:33;11088:43;:18;10997:57;11088:24;:43::i;:::-;11064:67;-1:-1:-1;11141:24:33;11168:37;:18;11064:67;11168:22;:37::i;:::-;11141:64;-1:-1:-1;11223:80:33;11244:58;11264:37;893:4:13;11283:17:33;11264:18;:37::i;:::-;11244:13;;:19;:58::i;5:130:-1:-;72:20;;97:33;72:20;97:33;:::i;1102:707::-;;1219:3;1212:4;1204:6;1200:17;1196:27;1186:2;;-1:-1;;1227:12;1186:2;1274:6;1261:20;1296:80;1311:64;1368:6;1311:64;:::i;:::-;1296:80;:::i;:::-;1404:21;;;1287:89;-1:-1;1448:4;1461:14;;;;1436:17;;;1550;;;1541:27;;;;1538:36;-1:-1;1535:2;;;1587:1;;1577:12;1535:2;1612:1;1597:206;1622:6;1619:1;1616:13;1597:206;;;6336:20;;1690:50;;1754:14;;;;1782;;;;1644:1;1637:9;1597:206;;;1601:14;;;;;1179:630;;;;:::o;1835:722::-;;1963:3;1956:4;1948:6;1944:17;1940:27;1930:2;;-1:-1;;1971:12;1930:2;2011:6;2005:13;2033:80;2048:64;2105:6;2048:64;:::i;2033:80::-;2141:21;;;2024:89;-1:-1;2185:4;2198:14;;;;2173:17;;;2287;;;2278:27;;;;2275:36;-1:-1;2272:2;;;2324:1;;2314:12;2272:2;2349:1;2334:217;2359:6;2356:1;2353:13;2334:217;;;6484:13;;2427:61;;2502:14;;;;2530;;;;2381:1;2374:9;2334:217;;3104:440;;3205:3;3198:4;3190:6;3186:17;3182:27;3172:2;;-1:-1;;3213:12;3172:2;3260:6;3247:20;34031:18;34023:6;34020:30;34017:2;;;-1:-1;;34053:12;34017:2;3282:64;34194:4;-1:-1;;3198:4;34111:6;34107:17;34103:33;34184:15;3282:64;:::i;:::-;3273:73;;3366:6;3359:5;3352:21;3470:3;34194:4;3461:6;3394;3452:16;;3449:25;3446:2;;;3487:1;;3477:12;3446:2;37634:6;34194:4;3394:6;3390:17;34194:4;3428:5;3424:16;37611:30;37690:1;37672:16;;;34194:4;37672:16;37665:27;3428:5;3165:379;-1:-1;;3165:379::o;4405:156::-;4485:20;;39365:1;39355:12;;39345:2;;39381:1;;39371:12;6680:241;;6784:2;6772:9;6763:7;6759:23;6755:32;6752:2;;;-1:-1;;6790:12;6752:2;85:6;72:20;97:33;124:5;97:33;:::i;6928:366::-;;;7049:2;7037:9;7028:7;7024:23;7020:32;7017:2;;;-1:-1;;7055:12;7017:2;85:6;72:20;97:33;124:5;97:33;:::i;:::-;7107:63;-1:-1;7207:2;7246:22;;72:20;97:33;72:20;97:33;:::i;:::-;7215:63;;;;7011:283;;;;;:::o;7301:491::-;;;;7439:2;7427:9;7418:7;7414:23;7410:32;7407:2;;;-1:-1;;7445:12;7407:2;85:6;72:20;97:33;124:5;97:33;:::i;:::-;7497:63;-1:-1;7597:2;7636:22;;72:20;97:33;72:20;97:33;:::i;:::-;7401:391;;7605:63;;-1:-1;;;7705:2;7744:22;;;;6336:20;;7401:391::o;7799:991::-;;;;;;;;8003:3;7991:9;7982:7;7978:23;7974:33;7971:2;;;-1:-1;;8010:12;7971:2;85:6;72:20;97:33;124:5;97:33;:::i;:::-;8062:63;-1:-1;8162:2;8201:22;;72:20;97:33;72:20;97:33;:::i;:::-;8170:63;-1:-1;8270:2;8309:22;;6336:20;;-1:-1;8378:2;8417:22;;6336:20;;-1:-1;8486:3;8524:22;;6612:20;36656:4;36645:16;;39578:33;;39568:2;;-1:-1;;39615:12;39568:2;7965:825;;;;-1:-1;7965:825;;;;8495:61;8593:3;8633:22;;2898:20;;-1:-1;8702:3;8742:22;;;2898:20;;7965:825;-1:-1;;7965:825::o;8797:366::-;;;8918:2;8906:9;8897:7;8893:23;8889:32;8886:2;;;-1:-1;;8924:12;8886:2;85:6;72:20;97:33;124:5;97:33;:::i;:::-;8976:63;9076:2;9115:22;;;;6336:20;;-1:-1;;;8880:283::o;9170:823::-;;;;9384:2;9372:9;9363:7;9359:23;9355:32;9352:2;;;-1:-1;;9390:12;9352:2;9441:17;9435:24;9479:18;;9471:6;9468:30;9465:2;;;-1:-1;;9501:12;9465:2;9618:6;9607:9;9603:22;;;452:3;445:4;437:6;433:17;429:27;419:2;;-1:-1;;460:12;419:2;500:6;494:13;522:95;537:79;609:6;537:79;:::i;522:95::-;623:16;659:6;652:5;645:21;689:4;;706:3;702:14;695:21;;689:4;681:6;677:17;811:3;689:4;;795:6;791:17;681:6;782:27;;779:36;776:2;;;-1:-1;;818:12;776:2;-1:-1;844:10;;838:232;863:6;860:1;857:13;838:232;;;3999:6;3993:13;4011:48;4053:5;4011:48;:::i;:::-;931:76;;885:1;878:9;;;;;1021:14;;;;1049;;838:232;;;-1:-1;9678:18;;9672:25;9521:114;;-1:-1;9672:25;-1:-1;;;9706:30;;;9703:2;;;-1:-1;;9739:12;9703:2;;9769:89;9850:7;9841:6;9830:9;9826:22;9769:89;:::i;:::-;9759:99;;;9895:2;9949:9;9945:22;6484:13;9903:74;;9346:647;;;;;:::o;10000:235::-;;10101:2;10089:9;10080:7;10076:23;10072:32;10069:2;;;-1:-1;;10107:12;10069:2;2642:6;2629:20;2654:30;2678:5;2654:30;:::i;10242:257::-;;10354:2;10342:9;10333:7;10329:23;10325:32;10322:2;;;-1:-1;;10360:12;10322:2;2777:6;2771:13;2789:30;2813:5;2789:30;:::i;10506:1235::-;;;;;;;;10746:3;10734:9;10725:7;10721:23;10717:33;10714:2;;;-1:-1;;10753:12;10714:2;2911:6;2898:20;10805:63;;10905:2;10948:9;10944:22;72:20;97:33;124:5;97:33;:::i;:::-;10913:63;-1:-1;11013:2;11052:22;;72:20;97:33;72:20;97:33;:::i;:::-;11021:63;-1:-1;11149:2;11134:18;;11121:32;11173:18;11162:30;;;11159:2;;;-1:-1;;11195:12;11159:2;11225:78;11295:7;11286:6;11275:9;11271:22;11225:78;:::i;:::-;11215:88;;11340:3;11384:9;11380:22;6336:20;11349:63;;11449:3;11493:9;11489:22;6336:20;11458:63;;11586:3;11575:9;11571:19;11558:33;11544:47;;11173:18;11603:6;11600:30;11597:2;;;-1:-1;;11633:12;11597:2;;11663:62;11717:7;11708:6;11697:9;11693:22;11663:62;:::i;:::-;11653:72;;;10708:1033;;;;;;;;;;:::o;11748:239::-;;11851:2;11839:9;11830:7;11826:23;11822:32;11819:2;;;-1:-1;;11857:12;11819:2;3047:6;3034:20;36068:66;38700:5;36057:78;38676:5;38673:34;38663:2;;-1:-1;;38711:12;11994:303;;12129:2;12117:9;12108:7;12104:23;12100:32;12097:2;;;-1:-1;;12135:12;12097:2;3656:6;3650:13;3668:53;3715:5;3668:53;:::i;12304:500::-;;;12449:2;12437:9;12428:7;12424:23;12420:32;12417:2;;;-1:-1;;12455:12;12417:2;3828:6;3815:20;3840:48;3882:5;3840:48;:::i;:::-;12507:78;-1:-1;12650:2;12635:18;;12622:32;12674:18;12663:30;;12660:2;;;-1:-1;;12696:12;12660:2;12726:62;12780:7;12771:6;12760:9;12756:22;12726:62;:::i;:::-;12716:72;;;12411:393;;;;;:::o;12811:289::-;;12939:2;12927:9;12918:7;12914:23;12910:32;12907:2;;;-1:-1;;12945:12;12907:2;4168:6;4162:13;4180:46;4220:5;4180:46;:::i;13107:690::-;;;;13294:2;13282:9;13273:7;13269:23;13265:32;13262:2;;;-1:-1;;13300:12;13262:2;4168:6;4162:13;4180:46;4220:5;4180:46;:::i;:::-;13497:2;13482:18;;13476:25;13352:87;;-1:-1;13521:18;13510:30;;13507:2;;;-1:-1;;13543:12;13507:2;13573:89;13654:7;13645:6;13634:9;13630:22;13573:89;:::i;13804:425::-;;;13949:2;13937:9;13928:7;13924:23;13920:32;13917:2;;;-1:-1;;13955:12;13917:2;4168:6;4162:13;4180:46;4220:5;4180:46;:::i;:::-;14131:2;14181:22;;;;6484:13;14007:87;;6484:13;;-1:-1;;;13911:318::o;14236:561::-;;;;14398:2;14386:9;14377:7;14373:23;14369:32;14366:2;;;-1:-1;;14404:12;14366:2;4168:6;4162:13;4180:46;4220:5;4180:46;:::i;:::-;14580:2;14630:22;;6484:13;14699:2;14749:22;;;6484:13;14456:87;;6484:13;;-1:-1;6484:13;14360:437;-1:-1;;;14360:437::o;15100:554::-;;;15270:2;15258:9;15249:7;15245:23;15241:32;15238:2;;;-1:-1;;15276:12;15238:2;4168:6;4162:13;4180:46;4220:5;4180:46;:::i;:::-;15473:2;15458:18;;15452:25;15328:87;;-1:-1;15497:18;15486:30;;15483:2;;;-1:-1;;15519:12;15483:2;15549:89;15630:7;15621:6;15610:9;15606:22;15549:89;:::i;16926:635::-;;;;17093:2;17081:9;17072:7;17068:23;17064:32;17061:2;;;-1:-1;;17099:12;17061:2;17157:17;17144:31;17195:18;;17187:6;17184:30;17181:2;;;-1:-1;;17217:12;17181:2;17312:6;17301:9;17297:22;;;4728:6;;4716:9;4711:3;4707:19;4703:32;4700:2;;;-1:-1;;4738:12;4700:2;4766:22;4728:6;4766:22;:::i;:::-;4757:31;;4870:62;4928:3;4904:22;4870:62;:::i;:::-;4852:16;4845:88;5030:64;5090:3;4997:2;5070:9;5066:22;5030:64;:::i;:::-;4997:2;5016:5;5012:16;5005:90;5193:64;5253:3;5160:2;5233:9;5229:22;5193:64;:::i;:::-;5160:2;5179:5;5175:16;5168:90;17093:2;5379:9;5375:22;6336:20;17093:2;5340:5;5336:16;5329:75;5467:3;5526:9;5522:22;2898:20;5467:3;5487:5;5483:16;5476:75;5623:3;5682:9;5678:22;6336:20;5623:3;5643:5;5639:16;5632:75;5802:49;5847:3;5768;5827:9;5823:22;5802:49;:::i;:::-;5768:3;5788:5;5784:16;5777:75;5945:49;5990:3;5911;5970:9;5966:22;5945:49;:::i;:::-;5911:3;5931:5;5927:16;5920:75;6088:3;;6077:9;6073:19;6060:33;17195:18;6105:6;6102:30;6099:2;;;-1:-1;;6135:12;6099:2;6182:58;6236:3;6227:6;6216:9;6212:22;6182:58;:::i;:::-;6162:18;;;6155:86;;;;-1:-1;6166:5;4997:2;17405:22;;6336:20;;-1:-1;5160:2;17513:22;;;6336:20;;17055:506;-1:-1;;;;;17055:506::o;17568:241::-;;17672:2;17660:9;17651:7;17647:23;17643:32;17640:2;;;-1:-1;;17678:12;17640:2;-1:-1;6336:20;;17634:175;-1:-1;17634:175::o;17816:627::-;;;;17979:2;17967:9;17958:7;17954:23;17950:32;17947:2;;;-1:-1;;17985:12;17947:2;6349:6;6336:20;18037:63;;18137:2;18180:9;18176:22;6336:20;18145:63;;18273:2;18262:9;18258:18;18245:32;18297:18;18289:6;18286:30;18283:2;;;-1:-1;;18319:12;18283:2;18349:78;18419:7;18410:6;18399:9;18395:22;18349:78;:::i;:::-;18339:88;;;17941:502;;;;;:::o;18450:672::-;;;;;18616:3;18604:9;18595:7;18591:23;18587:33;18584:2;;;-1:-1;;18623:12;18584:2;6490:6;6484:13;18675:74;;18786:2;18840:9;18836:22;6484:13;18794:74;;18905:2;18959:9;18955:22;6484:13;18913:74;;19024:2;19078:9;19074:22;220:13;238:33;265:5;238:33;:::i;:::-;18578:544;;;;-1:-1;18578:544;;-1:-1;;18578:544::o;19462:690::-;;19655:5;34477:12;35021:6;35016:3;35009:19;35058:4;;35053:3;35049:14;19667:93;;35058:4;19831:5;34331:14;-1:-1;19870:260;19895:6;19892:1;19889:13;19870:260;;;19956:13;;20342:37;;19283:14;;;;34864;;;;19917:1;19910:9;19870:260;;;-1:-1;20136:10;;19586:566;-1:-1;;;;;19586:566::o;21046:343::-;;21188:5;34477:12;35021:6;35016:3;35009:19;-1:-1;37779:101;37793:6;37790:1;37787:13;37779:101;;;35058:4;37860:11;;;;;37854:18;37841:11;;;;;37834:39;37808:10;37779:101;;;37895:6;37892:1;37889:13;37886:2;;;-1:-1;35058:4;37951:6;35053:3;37942:16;;37935:27;37886:2;-1:-1;38232:2;38212:14;-1:-1;;38208:28;21345:39;;;;35058:4;21345:39;;21136:253;-1:-1;;21136:253::o;23000:387::-;20342:37;;;36068:66;36057:78;23251:2;23242:12;;20637:56;23351:11;;;23142:245::o;23394:291::-;;37634:6;37629:3;37624;37611:30;37672:16;;37665:27;;;37672:16;23538:147;-1:-1;23538:147::o;23692:659::-;22545:66;22525:87;;22510:1;22631:11;;20342:37;;;;24203:12;;;20342:37;24314:12;;;23937:414::o;24358:222::-;-1:-1;;;;;36440:54;;;;19382:37;;24485:2;24470:18;;24456:124::o;24587:370::-;;24764:2;24785:17;24778:47;24839:108;24764:2;24753:9;24749:18;24933:6;24839:108;:::i;24964:629::-;;25219:2;25240:17;25233:47;25294:108;25219:2;25208:9;25204:18;25388:6;25294:108;:::i;:::-;25450:9;25444:4;25440:20;25435:2;25424:9;25420:18;25413:48;25475:108;25578:4;25569:6;25475:108;:::i;25600:210::-;35891:13;;35884:21;20225:34;;25721:2;25706:18;;25692:118::o;25817:432::-;35891:13;;35884:21;20225:34;;26152:2;26137:18;;20342:37;;;;26235:2;26220:18;;20342:37;25994:2;25979:18;;25965:284::o;26256:222::-;20342:37;;;26383:2;26368:18;;26354:124::o;26485:444::-;20342:37;;;-1:-1;;;;;36440:54;;;26832:2;26817:18;;19382:37;36440:54;26915:2;26900:18;;19382:37;26668:2;26653:18;;26639:290::o;26936:780::-;20342:37;;;-1:-1;;;;;36440:54;;;27368:2;27353:18;;19382:37;36440:54;;;;27451:2;27436:18;;19382:37;27534:2;27519:18;;20342:37;27617:3;27602:19;;20342:37;;;;27701:3;27686:19;;20342:37;27203:3;27188:19;;27174:542::o;27723:668::-;20342:37;;;28127:2;28112:18;;20342:37;;;;28210:2;28195:18;;20342:37;;;;28293:2;28278:18;;20342:37;-1:-1;;;;;36440:54;28376:3;28361:19;;19382:37;27962:3;27947:19;;27933:458::o;28398:417::-;;20372:5;20349:3;20342:37;28571:2;28689;28678:9;28674:18;28667:48;28729:76;28571:2;28560:9;28556:18;28791:6;28729:76;:::i;28822:363::-;20342:37;;;-1:-1;;;;;36440:54;29171:2;29156:18;;21487:70;28992:2;28977:18;;28963:222::o;29192:548::-;20342:37;;;36656:4;36645:16;;;;29560:2;29545:18;;22953:35;29643:2;29628:18;;20342:37;29726:2;29711:18;;20342:37;29399:3;29384:19;;29370:370::o;30275:310::-;;30422:2;30443:17;30436:47;30497:78;30422:2;30411:9;30407:18;30561:6;30497:78;:::i;30821:481::-;;20372:5;20349:3;20342:37;31026:2;31144;31133:9;31129:18;31122:48;31184:108;31026:2;31015:9;31011:18;31278:6;31184:108;:::i;31309:592::-;;20372:5;20349:3;20342:37;20372:5;31706:2;31695:9;31691:18;20342:37;31542:2;31743;31732:9;31728:18;31721:48;31783:108;31542:2;31531:9;31527:18;31877:6;31783:108;:::i;31908:852::-;;20372:5;20349:3;20342:37;20372:5;32384:2;32373:9;32369:18;20342:37;32219:3;32421:2;32410:9;32406:18;32399:48;32461:108;32219:3;32208:9;32204:19;32555:6;32461:108;:::i;:::-;32617:9;32611:4;32607:20;32602:2;32591:9;32587:18;32580:48;32642:108;32745:4;32736:6;32642:108;:::i;32767:214::-;36656:4;36645:16;;;;22953:35;;32890:2;32875:18;;32861:120::o;32988:256::-;33050:2;33044:9;33076:17;;;33151:18;33136:34;;33172:22;;;33133:62;33130:2;;;33208:1;;33198:12;33130:2;33050;33217:22;33028:216;;-1:-1;33028:216::o;33251:319::-;;33425:18;33417:6;33414:30;33411:2;;;-1:-1;;33447:12;33411:2;-1:-1;33492:4;33480:17;;;33545:15;;33348:222::o;38249:117::-;-1:-1;;;;;38336:5;36440:54;38311:5;38308:35;38298:2;;38357:1;;38347:12;38373:111;38454:5;35891:13;35884:21;38432:5;38429:32;38419:2;;38475:1;;38465:12;39055:107;39137:1;39130:5;39127:12;39117:2;;39153:1;;39143:12

ipfs://a5897244a1f4e9204983271ed4a7d57c09d1ef76e8b605f0151680b0f7bfeaef