Contract Source Code:
File 1 of 1 : pillowcats
// SPDX-License-Identifier: MIT
// File: contracts/interfaces/ILayerZeroUserApplicationConfig.sol
pragma solidity >=0.5.0;
interface ILayerZeroUserApplicationConfig {
// @notice set the configuration of the LayerZero messaging library of the specified version
// @param _version - messaging library version
// @param _chainId - the chainId for the pending config change
// @param _configType - type of configuration. every messaging library has its own convention.
// @param _config - configuration in the bytes. can encode arbitrary content.
function setConfig(
uint16 _version,
uint16 _chainId,
uint256 _configType,
bytes calldata _config
) external;
// @notice set the send() LayerZero messaging library version to _version
// @param _version - new messaging library version
function setSendVersion(uint16 _version) external;
// @notice set the lzReceive() LayerZero messaging library version to _version
// @param _version - new messaging library version
function setReceiveVersion(uint16 _version) external;
// @notice Only when the UA needs to resume the message flow in blocking mode and clear the stored payload
// @param _srcChainId - the chainId of the source chain
// @param _srcAddress - the contract address of the source contract at the source chain
function forceResumeReceive(uint16 _srcChainId, bytes calldata _srcAddress)
external;
}
// File: contracts/interfaces/ILayerZeroEndpoint.sol
pragma solidity >=0.5.0;
interface ILayerZeroEndpoint is ILayerZeroUserApplicationConfig {
// @notice send a LayerZero message to the specified address at a LayerZero endpoint.
// @param _dstChainId - the destination chain identifier
// @param _destination - the address on destination chain (in bytes). address length/format may vary by chains
// @param _payload - a custom bytes payload to send to the destination contract
// @param _refundAddress - if the source transaction is cheaper than the amount of value passed, refund the additional amount to this address
// @param _zroPaymentAddress - the address of the ZRO token holder who would pay for the transaction
// @param _adapterParams - parameters for custom functionality. e.g. receive airdropped native gas from the relayer on destination
function send(
uint16 _dstChainId,
bytes calldata _destination,
bytes calldata _payload,
address payable _refundAddress,
address _zroPaymentAddress,
bytes calldata _adapterParams
) external payable;
// @notice used by the messaging library to publish verified payload
// @param _srcChainId - the source chain identifier
// @param _srcAddress - the source contract (as bytes) at the source chain
// @param _dstAddress - the address on destination chain
// @param _nonce - the unbound message ordering nonce
// @param _gasLimit - the gas limit for external contract execution
// @param _payload - verified payload to send to the destination contract
function receivePayload(
uint16 _srcChainId,
bytes calldata _srcAddress,
address _dstAddress,
uint64 _nonce,
uint256 _gasLimit,
bytes calldata _payload
) external;
// @notice get the inboundNonce of a receiver from a source chain which could be EVM or non-EVM chain
// @param _srcChainId - the source chain identifier
// @param _srcAddress - the source chain contract address
function getInboundNonce(uint16 _srcChainId, bytes calldata _srcAddress)
external
view
returns (uint64);
// @notice get the outboundNonce from this source chain which, consequently, is always an EVM
// @param _srcAddress - the source chain contract address
function getOutboundNonce(uint16 _dstChainId, address _srcAddress)
external
view
returns (uint64);
// @notice gets a quote in source native gas, for the amount that send() requires to pay for message delivery
// @param _dstChainId - the destination chain identifier
// @param _userApplication - the user app address on this EVM chain
// @param _payload - the custom message to send over LayerZero
// @param _payInZRO - if false, user app pays the protocol fee in native token
// @param _adapterParam - parameters for the adapter service, e.g. send some dust native token to dstChain
function estimateFees(
uint16 _dstChainId,
address _userApplication,
bytes calldata _payload,
bool _payInZRO,
bytes calldata _adapterParam
) external view returns (uint256 nativeFee, uint256 zroFee);
// @notice get this Endpoint's immutable source identifier
function getChainId() external view returns (uint16);
// @notice the interface to retry failed message on this Endpoint destination
// @param _srcChainId - the source chain identifier
// @param _srcAddress - the source chain contract address
// @param _payload - the payload to be retried
function retryPayload(
uint16 _srcChainId,
bytes calldata _srcAddress,
bytes calldata _payload
) external;
// @notice query if any STORED payload (message blocking) at the endpoint.
// @param _srcChainId - the source chain identifier
// @param _srcAddress - the source chain contract address
function hasStoredPayload(uint16 _srcChainId, bytes calldata _srcAddress)
external
view
returns (bool);
// @notice query if the _libraryAddress is valid for sending msgs.
// @param _userApplication - the user app address on this EVM chain
function getSendLibraryAddress(address _userApplication)
external
view
returns (address);
// @notice query if the _libraryAddress is valid for receiving msgs.
// @param _userApplication - the user app address on this EVM chain
function getReceiveLibraryAddress(address _userApplication)
external
view
returns (address);
// @notice query if the non-reentrancy guard for send() is on
// @return true if the guard is on. false otherwise
function isSendingPayload() external view returns (bool);
// @notice query if the non-reentrancy guard for receive() is on
// @return true if the guard is on. false otherwise
function isReceivingPayload() external view returns (bool);
// @notice get the configuration of the LayerZero messaging library of the specified version
// @param _version - messaging library version
// @param _chainId - the chainId for the pending config change
// @param _userApplication - the contract address of the user application
// @param _configType - type of configuration. every messaging library has its own convention.
function getConfig(
uint16 _version,
uint16 _chainId,
address _userApplication,
uint256 _configType
) external view returns (bytes memory);
// @notice get the send() LayerZero messaging library version
// @param _userApplication - the contract address of the user application
function getSendVersion(address _userApplication)
external
view
returns (uint16);
// @notice get the lzReceive() LayerZero messaging library version
// @param _userApplication - the contract address of the user application
function getReceiveVersion(address _userApplication)
external
view
returns (uint16);
}
// File: contracts/interfaces/ILayerZeroReceiver.sol
pragma solidity >=0.5.0;
interface ILayerZeroReceiver {
// @notice LayerZero endpoint will invoke this function to deliver the message on the destination
// @param _srcChainId - the source endpoint identifier
// @param _srcAddress - the source sending contract address from the source chain
// @param _nonce - the ordered message nonce
// @param _payload - the signed payload is the UA bytes has encoded to be sent
function lzReceive(
uint16 _srcChainId,
bytes calldata _srcAddress,
uint64 _nonce,
bytes calldata _payload
) external;
}
// File: @openzeppelin/contracts/utils/Strings.sol
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length)
internal
pure
returns (string memory)
{
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(
address(this).balance >= amount,
"Address: insufficient balance"
);
(bool success, ) = recipient.call{value: amount}("");
require(
success,
"Address: unable to send value, recipient may have reverted"
);
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return
functionCallWithValue(
target,
data,
value,
"Address: low-level call with value failed"
);
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(
address(this).balance >= value,
"Address: insufficient balance for call"
);
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(
data
);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data)
internal
view
returns (bytes memory)
{
return
functionStaticCall(
target,
data,
"Address: low-level static call failed"
);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return
functionDelegateCall(
target,
data,
"Address: low-level delegate call failed"
);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override
returns (bool)
{
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(
address indexed from,
address indexed to,
uint256 indexed tokenId
);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(
address indexed owner,
address indexed approved,
uint256 indexed tokenId
);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(
address indexed owner,
address indexed operator,
bool approved
);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId)
external
view
returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator)
external
view
returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
string public hiddenMetadataUri;
string public uriSuffix = ".json";
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
bool public revealed = false;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC165, IERC165)
returns (bool)
{
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner)
public
view
virtual
override
returns (uint256)
{
require(
owner != address(0),
"ERC721: balance query for the zero address"
);
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId)
public
view
virtual
override
returns (address)
{
address owner = _owners[tokenId];
require(
owner != address(0),
"ERC721: owner query for nonexistent token"
);
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
if (revealed == false) {
return hiddenMetadataUri;
}
string memory baseURI = _baseURI();
return
bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, tokenId.toString(), uriSuffix))
: "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId)
public
view
virtual
override
returns (address)
{
require(
_exists(tokenId),
"ERC721: approved query for nonexistent token"
);
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved)
public
virtual
override
{
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator)
public
view
virtual
override
returns (bool)
{
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(
_isApprovedOrOwner(_msgSender(), tokenId),
"ERC721: transfer caller is not owner nor approved"
);
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(
_isApprovedOrOwner(_msgSender(), tokenId),
"ERC721: transfer caller is not owner nor approved"
);
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(
_checkOnERC721Received(from, to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId)
internal
view
virtual
returns (bool)
{
require(
_exists(tokenId),
"ERC721: operator query for nonexistent token"
);
address owner = ERC721.ownerOf(tokenId);
return (spender == owner ||
getApproved(tokenId) == spender ||
isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(
ERC721.ownerOf(tokenId) == from,
"ERC721: transfer of token that is not own"
);
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try
IERC721Receiver(to).onERC721Received(
_msgSender(),
from,
tokenId,
_data
)
returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert(
"ERC721: transfer to non ERC721Receiver implementer"
);
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: contracts/NonblockingReceiver.sol
pragma solidity ^0.8.6;
abstract contract NonblockingReceiver is Ownable, ILayerZeroReceiver {
ILayerZeroEndpoint internal endpoint;
struct FailedMessages {
uint256 payloadLength;
bytes32 payloadHash;
}
mapping(uint16 => mapping(bytes => mapping(uint256 => FailedMessages)))
public failedMessages;
mapping(uint16 => bytes) public trustedRemoteLookup;
event MessageFailed(
uint16 _srcChainId,
bytes _srcAddress,
uint64 _nonce,
bytes _payload
);
function lzReceive(
uint16 _srcChainId,
bytes memory _srcAddress,
uint64 _nonce,
bytes memory _payload
) external override {
require(msg.sender == address(endpoint)); // boilerplate! lzReceive must be called by the endpoint for security
require(
_srcAddress.length == trustedRemoteLookup[_srcChainId].length &&
keccak256(_srcAddress) ==
keccak256(trustedRemoteLookup[_srcChainId]),
"NonblockingReceiver: invalid source sending contract"
);
// try-catch all errors/exceptions
// having failed messages does not block messages passing
try this.onLzReceive(_srcChainId, _srcAddress, _nonce, _payload) {
// do nothing
} catch {
// error / exception
failedMessages[_srcChainId][_srcAddress][_nonce] = FailedMessages(
_payload.length,
keccak256(_payload)
);
emit MessageFailed(_srcChainId, _srcAddress, _nonce, _payload);
}
}
function onLzReceive(
uint16 _srcChainId,
bytes memory _srcAddress,
uint64 _nonce,
bytes memory _payload
) public {
// only internal transaction
require(
msg.sender == address(this),
"NonblockingReceiver: caller must be Bridge."
);
// handle incoming message
_LzReceive(_srcChainId, _srcAddress, _nonce, _payload);
}
// abstract function
function _LzReceive(
uint16 _srcChainId,
bytes memory _srcAddress,
uint64 _nonce,
bytes memory _payload
) internal virtual;
function _lzSend(
uint16 _dstChainId,
bytes memory _payload,
address payable _refundAddress,
address _zroPaymentAddress,
bytes memory _txParam
) internal {
endpoint.send{value: msg.value}(
_dstChainId,
trustedRemoteLookup[_dstChainId],
_payload,
_refundAddress,
_zroPaymentAddress,
_txParam
);
}
function retryMessage(
uint16 _srcChainId,
bytes memory _srcAddress,
uint64 _nonce,
bytes calldata _payload
) external payable {
// assert there is message to retry
FailedMessages storage failedMsg = failedMessages[_srcChainId][
_srcAddress
][_nonce];
require(
failedMsg.payloadHash != bytes32(0),
"NonblockingReceiver: no stored message"
);
require(
_payload.length == failedMsg.payloadLength &&
keccak256(_payload) == failedMsg.payloadHash,
"LayerZero: invalid payload"
);
// clear the stored message
failedMsg.payloadLength = 0;
failedMsg.payloadHash = bytes32(0);
// execute the message. revert if it fails again
this.onLzReceive(_srcChainId, _srcAddress, _nonce, _payload);
}
function setTrustedRemote(uint16 _chainId, bytes calldata _trustedRemote)
external
onlyOwner
{
trustedRemoteLookup[_chainId] = _trustedRemote;
}
}
// File: contracts/pillowcats-eth.sol
pragma solidity ^0.8.7;
contract pillowcats is Ownable, ERC721, NonblockingReceiver {
address public _owner;
string private baseURI;
uint256 nextTokenId = 700;
uint256 MAX_MINT_ETHEREUM = 4000;
uint256 gasForDestinationLzReceive = 350000;
constructor(string memory hiddenMetadataUri_, address _layerZeroEndpoint)
ERC721("PillowCats", "PC")
{
_owner = msg.sender;
endpoint = ILayerZeroEndpoint(_layerZeroEndpoint);
hiddenMetadataUri = hiddenMetadataUri_;
}
// mint function
// you can choose to mint 1 or 2
// mint is free, but payments are accepted
function mint(uint8 numTokens) external payable {
require(numTokens < 3, "pillowcats: Max 2 NFTs per transaction");
require(
nextTokenId + numTokens <= MAX_MINT_ETHEREUM,
"pillowcats: Mint exceeds supply"
);
_safeMint(msg.sender, ++nextTokenId);
if (numTokens == 2) {
_safeMint(msg.sender, ++nextTokenId);
}
}
// This function transfers the nft from your address on the
// source chain to the same address on the destination chain
function traverseChains(uint16 _chainId, uint256 tokenId) public payable {
require(
msg.sender == ownerOf(tokenId),
"You must own the token to traverse"
);
require(
trustedRemoteLookup[_chainId].length > 0,
"This chain is currently unavailable for travel"
);
// burn NFT, eliminating it from circulation on src chain
_burn(tokenId);
// abi.encode() the payload with the values to send
bytes memory payload = abi.encode(msg.sender, tokenId);
// encode adapterParams to specify more gas for the destination
uint16 version = 1;
bytes memory adapterParams = abi.encodePacked(
version,
gasForDestinationLzReceive
);
// get the fees we need to pay to LayerZero + Relayer to cover message delivery
// you will be refunded for extra gas paid
(uint256 messageFee, ) = endpoint.estimateFees(
_chainId,
address(this),
payload,
false,
adapterParams
);
require(
msg.value >= messageFee,
"pillowcats: msg.value not enough to cover messageFee. Send gas for message fees"
);
endpoint.send{value: msg.value}(
_chainId, // destination chainId
trustedRemoteLookup[_chainId], // destination address of nft contract
payload, // abi.encoded()'ed bytes
payable(msg.sender), // refund address
address(0x0), // 'zroPaymentAddress' unused for this
adapterParams // txParameters
);
}
function setBaseURI(string memory URI) external onlyOwner {
baseURI = URI;
}
function setRevealed(bool _state) public onlyOwner {
revealed = _state;
}
function donate() external payable {
// thank you
}
// This allows the devs to receive kind donations
function withdraw(uint256 amt) external onlyOwner {
(bool sent, ) = payable(_owner).call{value: amt}("");
require(sent, "pillowcats: Failed to withdraw Ether");
}
// just in case this fixed variable limits us from future integrations
function setGasForDestinationLzReceive(uint256 newVal) external onlyOwner {
gasForDestinationLzReceive = newVal;
}
function setUriSuffix(string memory _uriSuffix) public onlyOwner {
uriSuffix = _uriSuffix;
}
// ------------------
// Internal Functions
// ------------------
function _LzReceive(
uint16 _srcChainId,
bytes memory _srcAddress,
uint64 _nonce,
bytes memory _payload
) internal override {
// decode
(address toAddr, uint256 tokenId) = abi.decode(
_payload,
(address, uint256)
);
// mint the tokens back into existence on destination chain
_safeMint(toAddr, tokenId);
}
function _baseURI() internal view override returns (string memory) {
return baseURI;
}
}