Contract Name:
VFTokenBurnToMint
Contract Source Code:
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (interfaces/IERC2981.sol)
pragma solidity ^0.8.0;
import "../utils/introspection/IERC165.sol";
/**
* @dev Interface for the NFT Royalty Standard.
*
* A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal
* support for royalty payments across all NFT marketplaces and ecosystem participants.
*
* _Available since v4.5._
*/
interface IERC2981 is IERC165 {
/**
* @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of
* exchange. The royalty amount is denominated and should be paid in that same unit of exchange.
*/
function royaltyInfo(uint256 tokenId, uint256 salePrice)
external
view
returns (address receiver, uint256 royaltyAmount);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
_nonReentrantBefore();
_;
_nonReentrantAfter();
}
function _nonReentrantBefore() private {
// On the first call to nonReentrant, _status will be _NOT_ENTERED
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
}
function _nonReentrantAfter() private {
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
* or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
* understand this adds an external call which potentially creates a reentrancy vulnerability.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/cryptography/ECDSA.sol)
pragma solidity ^0.8.0;
import "../Strings.sol";
/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/
library ECDSA {
enum RecoverError {
NoError,
InvalidSignature,
InvalidSignatureLength,
InvalidSignatureS,
InvalidSignatureV // Deprecated in v4.8
}
function _throwError(RecoverError error) private pure {
if (error == RecoverError.NoError) {
return; // no error: do nothing
} else if (error == RecoverError.InvalidSignature) {
revert("ECDSA: invalid signature");
} else if (error == RecoverError.InvalidSignatureLength) {
revert("ECDSA: invalid signature length");
} else if (error == RecoverError.InvalidSignatureS) {
revert("ECDSA: invalid signature 's' value");
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature` or error string. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*
* Documentation for signature generation:
* - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
* - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
*
* _Available since v4.3._
*/
function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
if (signature.length == 65) {
bytes32 r;
bytes32 s;
uint8 v;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
/// @solidity memory-safe-assembly
assembly {
r := mload(add(signature, 0x20))
s := mload(add(signature, 0x40))
v := byte(0, mload(add(signature, 0x60)))
}
return tryRecover(hash, v, r, s);
} else {
return (address(0), RecoverError.InvalidSignatureLength);
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*/
function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, signature);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
*
* See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address, RecoverError) {
bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
uint8 v = uint8((uint256(vs) >> 255) + 27);
return tryRecover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
*
* _Available since v4.2._
*/
function recover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, r, vs);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `v`,
* `r` and `s` signature fields separately.
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address, RecoverError) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
// the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
// signatures from current libraries generate a unique signature with an s-value in the lower half order.
//
// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
// these malleable signatures as well.
if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
return (address(0), RecoverError.InvalidSignatureS);
}
// If the signature is valid (and not malleable), return the signer address
address signer = ecrecover(hash, v, r, s);
if (signer == address(0)) {
return (address(0), RecoverError.InvalidSignature);
}
return (signer, RecoverError.NoError);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `v`,
* `r` and `s` signature fields separately.
*/
function recover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, v, r, s);
_throwError(error);
return recovered;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
// 32 is the length in bytes of hash,
// enforced by the type signature above
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
}
/**
* @dev Returns an Ethereum Signed Message, created from `s`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
}
/**
* @dev Returns an Ethereum Signed Typed Data, created from a
* `domainSeparator` and a `structHash`. This produces hash corresponding
* to the one signed with the
* https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
* JSON-RPC method as part of EIP-712.
*
* See {recover}.
*/
function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
enum Rounding {
Down, // Toward negative infinity
Up, // Toward infinity
Zero // Toward zero
}
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a > b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a == 0 ? 0 : (a - 1) / b + 1;
}
/**
* @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
* @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
* with further edits by Uniswap Labs also under MIT license.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator
) internal pure returns (uint256 result) {
unchecked {
// 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
// use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2^256 + prod0.
uint256 prod0; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(x, y, not(0))
prod0 := mul(x, y)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division.
if (prod1 == 0) {
return prod0 / denominator;
}
// Make sure the result is less than 2^256. Also prevents denominator == 0.
require(denominator > prod1);
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0].
uint256 remainder;
assembly {
// Compute remainder using mulmod.
remainder := mulmod(x, y, denominator)
// Subtract 256 bit number from 512 bit number.
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
// See https://cs.stackexchange.com/q/138556/92363.
// Does not overflow because the denominator cannot be zero at this stage in the function.
uint256 twos = denominator & (~denominator + 1);
assembly {
// Divide denominator by twos.
denominator := div(denominator, twos)
// Divide [prod1 prod0] by twos.
prod0 := div(prod0, twos)
// Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
twos := add(div(sub(0, twos), twos), 1)
}
// Shift in bits from prod1 into prod0.
prod0 |= prod1 * twos;
// Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
// that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
// four bits. That is, denominator * inv = 1 mod 2^4.
uint256 inverse = (3 * denominator) ^ 2;
// Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
// in modular arithmetic, doubling the correct bits in each step.
inverse *= 2 - denominator * inverse; // inverse mod 2^8
inverse *= 2 - denominator * inverse; // inverse mod 2^16
inverse *= 2 - denominator * inverse; // inverse mod 2^32
inverse *= 2 - denominator * inverse; // inverse mod 2^64
inverse *= 2 - denominator * inverse; // inverse mod 2^128
inverse *= 2 - denominator * inverse; // inverse mod 2^256
// Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
// This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
// less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inverse;
return result;
}
}
/**
* @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator,
Rounding rounding
) internal pure returns (uint256) {
uint256 result = mulDiv(x, y, denominator);
if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
result += 1;
}
return result;
}
/**
* @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
*
* Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
*/
function sqrt(uint256 a) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
// For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
//
// We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
// `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
//
// This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
// → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
// → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
//
// Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
uint256 result = 1 << (log2(a) >> 1);
// At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
// since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
// every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
// into the expected uint128 result.
unchecked {
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
return min(result, a / result);
}
}
/**
* @notice Calculates sqrt(a), following the selected rounding direction.
*/
function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = sqrt(a);
return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
}
}
/**
* @dev Return the log in base 2, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 128;
}
if (value >> 64 > 0) {
value >>= 64;
result += 64;
}
if (value >> 32 > 0) {
value >>= 32;
result += 32;
}
if (value >> 16 > 0) {
value >>= 16;
result += 16;
}
if (value >> 8 > 0) {
value >>= 8;
result += 8;
}
if (value >> 4 > 0) {
value >>= 4;
result += 4;
}
if (value >> 2 > 0) {
value >>= 2;
result += 2;
}
if (value >> 1 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 2, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log2(value);
return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 10, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >= 10**64) {
value /= 10**64;
result += 64;
}
if (value >= 10**32) {
value /= 10**32;
result += 32;
}
if (value >= 10**16) {
value /= 10**16;
result += 16;
}
if (value >= 10**8) {
value /= 10**8;
result += 8;
}
if (value >= 10**4) {
value /= 10**4;
result += 4;
}
if (value >= 10**2) {
value /= 10**2;
result += 2;
}
if (value >= 10**1) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log10(value);
return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 256, rounded down, of a positive value.
* Returns 0 if given 0.
*
* Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
*/
function log256(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 16;
}
if (value >> 64 > 0) {
value >>= 64;
result += 8;
}
if (value >> 32 > 0) {
value >>= 32;
result += 4;
}
if (value >> 16 > 0) {
value >>= 16;
result += 2;
}
if (value >> 8 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log256(value);
return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)
pragma solidity ^0.8.0;
import "./math/Math.sol";
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _SYMBOLS = "0123456789abcdef";
uint8 private constant _ADDRESS_LENGTH = 20;
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
unchecked {
uint256 length = Math.log10(value) + 1;
string memory buffer = new string(length);
uint256 ptr;
/// @solidity memory-safe-assembly
assembly {
ptr := add(buffer, add(32, length))
}
while (true) {
ptr--;
/// @solidity memory-safe-assembly
assembly {
mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
}
value /= 10;
if (value == 0) break;
}
return buffer;
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
unchecked {
return toHexString(value, Math.log256(value) + 1);
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
/**
* @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
*/
function toHexString(address addr) internal pure returns (string memory) {
return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
interface IAccessControlVF {
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(
bytes32 indexed role,
bytes32 indexed previousAdminRole,
bytes32 indexed newAdminRole
);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {AccessControl-_setupRole}.
*/
event RoleGranted(
bytes32 indexed role,
address indexed account,
address indexed sender
);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(
bytes32 indexed role,
address indexed account,
address indexed sender
);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account)
external
view
returns (bool);
/**
* @dev Revert with a standard message if `account` is missing `role`.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*/
function checkRole(bytes32 role, address account) external view;
/**
* @dev Returns bytes of default admin role
*/
function getAdminRole() external view returns (bytes32);
/**
* @dev Returns bytes of token contract role
*/
function getTokenContractRole() external view returns (bytes32);
/**
* @dev Returns bytes of sales contract role
*/
function getSalesContractRole() external view returns (bytes32);
/**
* @dev Returns bytes of burner role
*/
function getBurnerRole() external view returns (bytes32);
/**
* @dev Returns bytes of minter role
*/
function getMinterRole() external view returns (bytes32);
/**
* @dev Returns a bytes array of roles that can be minters
*/
function getMinterRoles() external view returns (bytes32[] memory);
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) external view returns (bytes32);
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been revoked `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) external;
/**
* @dev Selects the next minter from the minters array using the current minter index.
* The current minter index should be incremented after each selection. If the
* current minter index + 1 is equal to the minters array length then the current
* minter index should be set back to 0
*
* Requirements:
*
* - the caller must be an admin role
*/
function selectNextMinter() external returns (address payable);
/**
* @dev Grants `minter` minter role and adds `minter` to minters array
*
* Requirements:
*
* - the caller must be an admin role
*/
function grantMinterRole(address minter) external;
/**
* @dev Revokes minter role from `minter` and removes `minter` from minters array
*
* Requirements:
*
* - the caller must be an admin role
*/
function revokeMinterRole(address minter) external;
/**
* @dev Distributes ETH evenly to all addresses in minters array
*/
function fundMinters() external payable;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
interface IBurnVF {
function transferFrom(address from, address to, uint256 tokenId) external;
function burn(uint256 tokenId) external;
function burn(address from, uint256 tokenId) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
import {AccessControlVFExtension} from "../extensions/accesscontrol/AccessControlVFExtension.sol";
import {RoyaltiesVFExtension} from "../extensions/royalties/RoyaltiesVFExtension.sol";
import {TokenURIGeneratorVFExtension} from "../extensions/tokenurigenerator/TokenURIGeneratorVFExtension.sol";
import {WithdrawVFExtension} from "../extensions/withdraw/WithdrawVFExtension.sol";
abstract contract VFTokenAllExtensions is
AccessControlVFExtension,
RoyaltiesVFExtension,
TokenURIGeneratorVFExtension,
WithdrawVFExtension
{
constructor(
address controlContractAddress,
address royaltiesContractAddress,
address renderingContractAddress
)
AccessControlVFExtension(controlContractAddress)
RoyaltiesVFExtension(royaltiesContractAddress)
TokenURIGeneratorVFExtension(renderingContractAddress)
{}
function setRoyaltiesContract(address royaltiesContractAddress)
external
onlyRole(getAdminRole())
{
super._setRoyaltiesContract(royaltiesContractAddress);
}
function setRenderingContract(address renderContractAddress)
external
onlyRole(getAdminRole())
{
super._setRenderingContract(renderContractAddress);
}
function withdrawMoney() external onlyRole(getAdminRole()) {
super._withdrawMoney();
}
function withdrawToken(
address contractAddress,
address to,
uint256 tokenId
) external onlyRole(getAdminRole()) {
super._withdrawToken(contractAddress, to, tokenId);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
import "../burn/IBurnVF.sol";
import "../token/ERC721VF.sol";
import "./VFTokenAllExtensions.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";
contract VFTokenBurnToMint is ERC721VF, VFTokenAllExtensions, ReentrancyGuard {
using ECDSA for bytes32;
//Token base URI
string private _baseUri;
//Address of burn signer
address private _mintSigner;
//Address to burn tokens from
address private _burnFromContractAddress;
//Address to burn tokens to
address public constant BURN_ADDRESS =
0x000000000000000000000000000000000000dEaD;
error InvalidMintSignature();
/**
* @dev Initializes the contract by setting a `initialBaseUri`, `name`, `symbol`,
* and a `controlContractAddress` to the token collection.
*/
constructor(
string memory initialBaseUri,
string memory name,
string memory symbol,
address controlContractAddress,
address royaltiesContractAddress,
address renderingContractAddress,
address mintSigner,
address burnFromContractAddress
)
ERC721VF(name, symbol)
VFTokenAllExtensions(
controlContractAddress,
royaltiesContractAddress,
renderingContractAddress
)
{
string memory contractAddress = Strings.toHexString(
uint160(address(this)),
20
);
setBaseURI(
string(
abi.encodePacked(initialBaseUri, contractAddress, "/tokens/")
)
);
_mintSigner = mintSigner;
_burnFromContractAddress = burnFromContractAddress;
}
/**
* @dev Update the mint signer address with `signer`
*
* Requirements:
*
* - the caller must be an admin role
*/
function setMintSigner(address signer) external onlyRole(getAdminRole()) {
_mintSigner = signer;
}
/**
* @dev Get the base token URI
*/
function _baseURI() internal view virtual override returns (string memory) {
return _baseUri;
}
/**
* @dev Update the base token URI
*
* Requirements:
*
* - the caller must be an admin role
*/
function setBaseURI(string memory baseUri) public onlyRole(getAdminRole()) {
_baseUri = baseUri;
}
/**
* @dev Permanently lock minting
*
* Requirements:
*
* - the caller must be an admin role
*/
function lockMintingPermanently() external onlyRole(getAdminRole()) {
_lockMintingPermanently();
}
/**
* @dev Set the active/inactive state of minting
*
* Requirements:
*
* - the caller must be an admin role
*/
function toggleMintActive() external onlyRole(getAdminRole()) {
_toggleMintActive();
}
/**
* @dev Set the active/inactive state of burning
*
* Requirements:
*
* - the caller must be an admin role
*/
function toggleBurnActive() external onlyRole(getAdminRole()) {
_toggleBurnActive();
}
/**
* @dev mint batch `to` for `quantity` starting at `startTokenId`
*
* Requirements:
*
* - the caller must be a minter role
* - minting must not be locked and must be active
*/
function mintBatch(
address to,
uint8 quantity
) external onlyRoles(getMinterRoles()) nonReentrant notLocked mintActive {
_mintBatch(to, quantity, totalMinted() + 1);
}
/**
* @dev Send tokens to burn island
*
* Requirements:
*
* - `contractAddress` must support the IERC721 interface
* - `signature` must be signed by the burn signer address
* - `nonce` must be unique
* - `tokenIds` must be owned by the sender
*/
function burnAndMint(
string calldata mintId,
uint256[] calldata tokenIds,
uint256 nonce,
bytes calldata signature
) external nonReentrant notLocked mintActive {
bytes32 txHash = _getTxHash(
mintId,
_msgSender(),
tokenIds,
nonce
);
if (!_isValidMintSignature(txHash, signature)) {
revert InvalidMintSignature();
}
for (uint256 i = 0; i < tokenIds.length; i++) {
IBurnVF(_burnFromContractAddress).transferFrom(
_msgSender(),
BURN_ADDRESS,
tokenIds[i]
);
}
_mintBatch(_msgSender(), tokenIds.length, totalMinted() + 1);
}
/**
* @dev burn `from` token `tokenId`
*
* Requirements:
*
* - the caller must be a burner role
* - burning must be active
*/
function burn(
address from,
uint256 tokenId
) external onlyRole(getBurnerRole()) burnActive {
_burn(from, tokenId, false);
}
/**
* @dev If renderingContract is set then returns its tokenURI(tokenId)
* return value, otherwise returns the standard baseTokenURI + tokenId.
*/
function tokenURI(
uint256 tokenId
) public view override returns (string memory) {
if (getRenderingContract() != address(0)) {
return renderingContractTokenURI(tokenId);
}
return super.tokenURI(tokenId);
}
/**
* @dev Validate a burn id is signed by the burn signer address
*/
function _isValidMintSignature(
bytes32 txHash,
bytes calldata signature
) internal view returns (bool isValid) {
address signer = txHash.toEthSignedMessageHash().recover(signature);
return signer == _mintSigner;
}
/**
* @dev Get the hash of a mint transaction
*/
function _getTxHash(
string calldata mintId,
address sender,
uint256[] calldata tokenIds,
uint256 nonce
) internal pure returns (bytes32) {
return
keccak256(
abi.encodePacked(mintId, sender, tokenIds, nonce)
);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
import {IAccessControlVF} from "../../access/IAccessControlVF.sol";
import {Context} from "@openzeppelin/contracts/utils/Context.sol";
import {IERC165} from "@openzeppelin/contracts/utils/introspection/IERC165.sol";
abstract contract AccessControlVFExtension is Context, IERC165 {
//Contract for function access control
IAccessControlVF private _controlContract;
constructor(address controlContractAddress) {
_controlContract = IAccessControlVF(controlContractAddress);
}
modifier onlyRole(bytes32 role) virtual {
_controlContract.checkRole(role, _msgSender());
_;
}
modifier onlyRoles(bytes32[] memory roles) virtual {
bool hasRequiredRole = false;
for (uint256 i; i < roles.length; i++) {
bytes32 role = roles[i];
if (_controlContract.hasRole(role, _msgSender())) {
hasRequiredRole = true;
break;
}
}
require(hasRequiredRole, "Missing required role");
_;
}
function getAdminRole() public view returns (bytes32) {
return _controlContract.getAdminRole();
}
function getMinterRoles() public view returns (bytes32[] memory) {
return _controlContract.getMinterRoles();
}
function getBurnerRole() public view returns (bytes32) {
return _controlContract.getBurnerRole();
}
/**
* @dev Update the access control contract
*
* Requirements:
*
* - the caller must be an admin role
* - `controlContractAddress` must support the IVFAccesControl interface
*/
function setControlContract(address controlContractAddress)
external
onlyRole(_controlContract.getAdminRole())
{
require(
IERC165(controlContractAddress).supportsInterface(
type(IAccessControlVF).interfaceId
),
"Contract does not support required interface"
);
_controlContract = IAccessControlVF(controlContractAddress);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
import {IRoyaltiesVF} from "../../royalties/IRoyaltiesVF.sol";
import {Context} from "@openzeppelin/contracts/utils/Context.sol";
import {IERC165} from "@openzeppelin/contracts/utils/introspection/IERC165.sol";
import {IERC2981} from "@openzeppelin/contracts/interfaces/IERC2981.sol";
abstract contract RoyaltiesVFExtension is Context, IERC165, IERC2981 {
//Contract for function access control
IRoyaltiesVF private _royaltiesContract;
constructor(address royaltiesContractAddress) {
_royaltiesContract = IRoyaltiesVF(royaltiesContractAddress);
}
/**
* @dev Get royalty information for a token based on the `salePrice`
*/
function royaltyInfo(uint256 tokenId, uint256 salePrice)
external
view
returns (address receiver, uint256 royaltyAmount)
{
return
_royaltiesContract.royaltyInfo(tokenId, address(this), salePrice);
}
/**
* @dev Update the royalties contract
*
* Requirements:
*
* - the caller must be an admin role
* - `royaltiesContractAddress` must support the IRoyaltiesVF interface
*/
function _setRoyaltiesContract(address royaltiesContractAddress) internal {
require(
IERC165(royaltiesContractAddress).supportsInterface(
type(IRoyaltiesVF).interfaceId
),
"Contract does not support required interface"
);
_royaltiesContract = IRoyaltiesVF(royaltiesContractAddress);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
import {ITokenURIGeneratorVF} from "../../urigenerator/ITokenURIGeneratorVF.sol";
import {Context} from "@openzeppelin/contracts/utils/Context.sol";
import {IERC165} from "@openzeppelin/contracts/utils/introspection/IERC165.sol";
abstract contract TokenURIGeneratorVFExtension is Context, IERC165 {
//Contract for function access control
ITokenURIGeneratorVF private _tokenURIGeneratorContract;
constructor(address tokenURIGeneratorContractAddress) {
if (tokenURIGeneratorContractAddress != address(0)) {
_tokenURIGeneratorContract = ITokenURIGeneratorVF(
tokenURIGeneratorContractAddress
);
}
}
function renderingContractTokenURI(uint256 tokenId)
public
view
returns (string memory)
{
return _tokenURIGeneratorContract.tokenURI(tokenId);
}
function getRenderingContract() public view returns (address) {
return address(_tokenURIGeneratorContract);
}
/**
* @dev Update the royalties contract
*
* Requirements:
*
* - the caller must be an admin role
* - `tokenURIGeneratorContractAddress` must support the IRoyaltiesVF interface
*/
function _setRenderingContract(address tokenURIGeneratorContractAddress)
internal
{
require(
IERC165(tokenURIGeneratorContractAddress).supportsInterface(
type(ITokenURIGeneratorVF).interfaceId
),
"Contract does not support required interface"
);
_tokenURIGeneratorContract = ITokenURIGeneratorVF(
tokenURIGeneratorContractAddress
);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
import "@openzeppelin/contracts/token/ERC721/IERC721.sol";
import {Context} from "@openzeppelin/contracts/utils/Context.sol";
abstract contract WithdrawVFExtension is Context {
constructor() {}
/**
* @dev Withdraw balance on contact to msg sender
*
* Requirements:
*
* - the caller must be an admin role
*/
function _withdrawMoney() internal {
address payable to = payable(_msgSender());
to.transfer(address(this).balance);
}
/**
* @dev Withdraw token if we need to refund
*
* Requirements:
*
* - `contractAddress` must support the IVFToken interface
* - the caller must be an admin role
*/
function _withdrawToken(
address contractAddress,
address to,
uint256 tokenId
) internal {
IERC721(contractAddress).transferFrom(address(this), to, tokenId);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
interface IRoyaltiesVF {
/**
* @dev Update the access control contract
*
* Requirements:
*
* - the caller must be an admin role
* - `controlContractAddress` must support the IVFAccesControl interface
*/
function setControlContract(address controlContractAddress) external;
/**
* @dev Get royalty information for a contract based on the `salePrice` of a token
*/
function royaltyInfo(
uint256,
address contractAddress,
uint256 salePrice
) external view returns (address receiver, uint256 royaltyAmount);
/**
* @dev Sets the royalty information that all ids in this contract will default to.
*
* Requirements:
*
* - `receiver` cannot be the zero address.
* - `feeNumerator` cannot be greater than the fee denominator.
*/
function setDefaultRoyalty(address receiver, uint96 feeNumerator) external;
/**
* @dev Removes default royalty information.
*/
function deleteDefaultRoyalty() external;
/**
* @dev Sets the royalty information for `contractAddress`.
*
* Requirements:
*
* - `receiver` cannot be the zero address.
* - `feeNumerator` cannot be greater than the fee denominator.
*/
function setContractRoyalties(
address contractAddress,
address receiver,
uint96 feeNumerator
) external;
/**
* @dev Removes royalty information for `contractAddress`.
*/
function resetContractRoyalty(address contractAddress) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC721VF.sol";
import "operator-filter-registry/src/DefaultOperatorFilterer.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/Context.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
import "@openzeppelin/contracts/utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension.
*/
contract ERC721VF is Context, ERC165, IERC721VF, DefaultOperatorFilterer {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
// The number of tokens minted
uint256 private _mintCounter;
// The number of tokens burned
uint256 private _burnCounter;
//Flag to permanently lock minting
bool public mintingPermanentlyLocked = false;
//Flag to activate or disable minting
bool public isMintActive = false;
//Flag to activate or disable burning
bool public isBurnActive = false;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
modifier notLocked() virtual {
if (mintingPermanentlyLocked) {
revert ERC721VFMintingPermanentlyLocked();
}
_;
}
modifier mintActive() virtual {
if (!isMintActive) {
revert ERC721VFMintIsNotActive();
}
_;
}
modifier burnActive() virtual {
if (!isBurnActive) {
revert ERC721VFBurnIsNotActive();
}
_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC165, IERC165)
returns (bool)
{
return
interfaceId == 0x80ac58cd || // ERC165 interface ID for ERC721
interfaceId == 0x5b5e139f || // ERC165 interface ID for ERC721Metadata
interfaceId == type(IERC721VF).interfaceId || // ERC165 interface ID for ERC721VF.
super.supportsInterface(interfaceId); // ERC165 interface ID for ERC165
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner)
public
view
virtual
override
returns (uint256)
{
if (owner == address(0)) {
revert ERC721VFAddressZeroIsNotAValidOwner();
}
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId)
public
view
virtual
override
returns (address)
{
address owner = _ownerOf(tokenId);
if (owner == address(0)) {
revert ERC721VFInvalidTokenID(tokenId);
}
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
_requireMinted(tokenId);
string memory baseURI = _baseURI();
return
bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, tokenId.toString()))
: "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overridden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId)
public
virtual
override
onlyAllowedOperatorApproval(to)
{
address owner = ERC721VF.ownerOf(tokenId);
if (to == owner) {
revert ERC721VFApprovalToCurrentOwner(to, tokenId);
}
if (_msgSender() != owner && !isApprovedForAll(owner, _msgSender())) {
revert ERC721VFApproveCallerIsNotTokenOwnerOrApprovedForAll(
to,
tokenId
);
}
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId)
public
view
virtual
override
returns (address)
{
_requireMinted(tokenId);
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved)
public
virtual
override
onlyAllowedOperatorApproval(operator)
{
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator)
public
view
virtual
override
returns (bool)
{
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override onlyAllowedOperator(from) {
_transferFrom(from, to, tokenId, true);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override onlyAllowedOperator(from) {
_safeTransferFrom(from, to, tokenId, true);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory data
) public virtual override onlyAllowedOperator(from) {
_safeTransferFrom(from, to, tokenId, true, data);
}
/**
* @dev See {IERC721VF-totalSupply}.
*/
function totalSupply() public view returns (uint256) {
unchecked {
return _mintCounter - _burnCounter;
}
}
/**
* @dev See {IERC721VF-totalMinted}.
*/
function totalMinted() public view returns (uint256) {
unchecked {
return _mintCounter;
}
}
/**
* @dev See {IERC721VF-totalBurned}.
*/
function totalBurned() public view returns (uint256) {
unchecked {
return _burnCounter;
}
}
/**
* @dev See {IERC721VF-tokensOfOwner}.
*/
function tokensOfOwner(address owner)
public
view
returns (uint256[] memory ownerTokens)
{
address currentOwnerAddress;
uint256 tokenCount = balanceOf(owner);
if (tokenCount == 0) {
return new uint256[](0);
} else {
uint256[] memory result = new uint256[](tokenCount);
uint256 resultIndex = 0;
uint256 index;
for (index = 0; resultIndex != tokenCount; index++) {
currentOwnerAddress = _owners[index];
if (currentOwnerAddress == owner) {
result[resultIndex++] = index;
}
}
return result;
}
}
/**
* @dev See {IERC721VF-tokensOfOwnerIn}.
*/
function tokensOfOwnerIn(
address owner,
uint256 startIndex,
uint256 endIndex
) public view returns (uint256[] memory ownerTokens) {
address currentOwnerAddress;
uint256 tokenCount = balanceOf(owner);
if (tokenCount == 0) {
return new uint256[](0);
} else {
uint256[] memory result = new uint256[](tokenCount);
uint256 resultIndex = 0;
uint256 index = startIndex;
for (index; index <= endIndex; index++) {
currentOwnerAddress = _owners[index];
if (currentOwnerAddress == owner) {
result[resultIndex++] = index;
}
}
// Downsize the array to fit.
assembly {
mstore(result, resultIndex)
}
return result;
}
}
/**
* @dev See {IERC721-transferFrom}.
*/
function _transferFrom(
address from,
address to,
uint256 tokenId,
bool approvalCheck
) internal virtual {
//solhint-disable-next-line max-line-length
if (approvalCheck) {
if (!_isApprovedOrOwner(_msgSender(), tokenId)) {
revert ERC721VFCallerIsNotTokenOwnerOrApproved(
from,
to,
tokenId
);
}
}
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function _safeTransferFrom(
address from,
address to,
uint256 tokenId,
bool approvalCheck
) internal virtual {
_safeTransferFrom(from, to, tokenId, approvalCheck, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function _safeTransferFrom(
address from,
address to,
uint256 tokenId,
bool approvalCheck,
bytes memory data
) internal virtual {
if (approvalCheck) {
if (!_isApprovedOrOwner(_msgSender(), tokenId)) {
revert ERC721VFCallerIsNotTokenOwnerOrApproved(
from,
to,
tokenId
);
}
}
_safeTransfer(from, to, tokenId, data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory data
) internal virtual {
_transfer(from, to, tokenId);
if (!_checkOnERC721Received(from, to, tokenId, data)) {
revert ERC721VFTransferToNonERC721VFReceiverImplementer(
to,
tokenId
);
}
}
/**
* @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist
*/
function _ownerOf(uint256 tokenId) internal view virtual returns (address) {
return _owners[tokenId];
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _ownerOf(tokenId) != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId)
internal
view
virtual
returns (bool)
{
address owner = ERC721VF.ownerOf(tokenId);
return (spender == owner ||
isApprovedForAll(owner, spender) ||
getApproved(tokenId) == spender);
}
/**
* @dev Permanently lock minting
*
* Requirements:
*
* - the caller must be an admin role
*/
function _lockMintingPermanently() internal {
mintingPermanentlyLocked = true;
}
/**
* @dev Set the active/inactive state of minting
*
* Requirements:
*
* - the caller must be an admin role
*/
function _toggleMintActive() internal {
isMintActive = !isMintActive;
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory data
) internal virtual {
_mint(to, tokenId);
if (!_checkOnERC721Received(address(0), to, tokenId, data)) {
revert ERC721VFTransferToNonERC721VFReceiverImplementer(
to,
tokenId
);
}
}
/**
* @dev Safely batch mints tokens starting at `startTokenId` until `quantity` is met and transfers them to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
* - Transfer to only ERC721Reciever implementers
*
* Emits a {Transfer} event.
*/
function _safeMintBatch(
address to,
uint256 quantity,
uint256 startTokenId
) internal returns (uint256 endToken) {
uint256 tokenId = startTokenId;
for (uint256 i; i < quantity; i++) {
if (to == address(0)) {
revert ERC721VFMintToTheZeroAddress();
}
if (_exists(tokenId)) {
revert ERC721VFTokenAlreadyMinted(tokenId);
}
_beforeTokenTransfer(address(0), to, tokenId, 1);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
_afterTokenTransfer(address(0), to, tokenId, 1);
if (!_checkOnERC721Received(address(0), to, tokenId, "")) {
revert ERC721VFTransferToNonERC721VFReceiverImplementer(
to,
tokenId
);
}
tokenId++;
}
unchecked {
_mintCounter += quantity;
}
return tokenId;
}
/**
* @dev Airdrop `addresses` for `quantity` starting at `startTokenId`
*
* Requirements:
*
* - the caller must be a minter role
* - minting must not be locked and must be active
* - `addresses` and `quantities` must have the same length
*/
function _airdrop(
address[] calldata addresses,
uint256[] calldata quantities,
uint256 startTokenId
) internal virtual {
if (addresses.length != quantities.length) {
revert ERC721VFAddressAndQuantitiesNeedToBeEqualLength();
}
for (uint256 i; i < addresses.length; i++) {
startTokenId = _mintBatch(
addresses[i],
quantities[i],
startTokenId
);
}
}
/**
* @dev Batch mints tokens starting at `startTokenId` until `quantity` is met and transfers them to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _mintBatch(
address to,
uint256 quantity,
uint256 startTokenId
) internal virtual returns (uint256 endToken) {
uint256 tokenId = startTokenId;
for (uint256 i; i < quantity; i++) {
if (to == address(0)) {
revert ERC721VFMintToTheZeroAddress();
}
if (_exists(tokenId)) {
revert ERC721VFTokenAlreadyMinted(tokenId);
}
_beforeTokenTransfer(address(0), to, tokenId, 1);
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
_afterTokenTransfer(address(0), to, tokenId, 1);
tokenId++;
}
unchecked {
_balances[to] += quantity;
_mintCounter += quantity;
}
return tokenId;
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
if (to == address(0)) {
revert ERC721VFMintToTheZeroAddress();
}
if (_exists(tokenId)) {
revert ERC721VFTokenAlreadyMinted(tokenId);
}
_beforeTokenTransfer(address(0), to, tokenId, 1);
unchecked {
// Will not overflow unless all 2**256 token ids are minted to the same owner.
// Given that tokens are minted one by one, it is impossible in practice that
// this ever happens. Might change if we allow batch minting.
// The ERC fails to describe this case.
_balances[to] += 1;
}
_owners[tokenId] = to;
unchecked {
_mintCounter++;
}
emit Transfer(address(0), to, tokenId);
_afterTokenTransfer(address(0), to, tokenId, 1);
}
/**
* @dev Set the active/inactive state of burning
*
* Requirements:
*
* - the caller must be an admin role
*/
function _toggleBurnActive() internal {
isBurnActive = !isBurnActive;
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
* This is an internal function that does not check if the sender is authorized to operate on the token.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(
address from,
uint256 tokenId,
bool approvalCheck
) internal virtual {
if (approvalCheck) {
if (!_isApprovedOrOwner(from, tokenId)) {
revert ERC721VFBurnCallerIsNotTokenOwnerOrApproved(
from,
tokenId
);
}
}
_burn(tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
* This is an internal function that does not check if the sender is authorized to operate on the token.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721VF.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId, 1);
// Clear approvals
delete _tokenApprovals[tokenId];
unchecked {
// Cannot overflow, as that would require more tokens to be burned/transferred
// out than the owner initially received through minting and transferring in.
_balances[owner] -= 1;
}
delete _owners[tokenId];
unchecked {
_burnCounter++;
}
emit Transfer(owner, address(0), tokenId);
_afterTokenTransfer(owner, address(0), tokenId, 1);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
if (to == address(0)) {
revert ERC721VFTransferToTheZeroAddress();
}
if (ERC721VF.ownerOf(tokenId) != from) {
revert ERC721VFTransferFromIncorrectOwner(from, tokenId);
}
_beforeTokenTransfer(from, to, tokenId, 1);
// Clear approvals from the previous owner
delete _tokenApprovals[tokenId];
unchecked {
// `_balances[from]` cannot overflow for the same reason as described in `_burn`:
// `from`'s balance is the number of token held, which is at least one before the current
// transfer.
// `_balances[to]` could overflow in the conditions described in `_mint`. That would require
// all 2**256 token ids to be minted, which in practice is impossible.
_balances[from] -= 1;
_balances[to] += 1;
}
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
_afterTokenTransfer(from, to, tokenId, 1);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits an {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721VF.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits an {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
if (owner == operator) {
revert ERC721VFApproveToCaller();
}
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Reverts if the `tokenId` has not been minted yet.
*/
function _requireMinted(uint256 tokenId) internal view virtual {
if (!_exists(tokenId)) {
revert ERC721VFInvalidTokenID(tokenId);
}
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory data
) private returns (bool) {
if (to.isContract()) {
try
IERC721Receiver(to).onERC721Received(
_msgSender(),
from,
tokenId,
data
)
returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert ERC721VFTransferToNonERC721VFReceiverImplementer(
to,
tokenId
);
} else {
/// @solidity memory-safe-assembly
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
* - `batchSize` is non-zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId,
uint256 batchSize
) internal virtual {}
/**
* @dev Hook that is called after any token transfer. This includes minting and burning. If {ERC721Consecutive} is
* used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s tokens were transferred to `to`.
* - When `from` is zero, the tokens were minted for `to`.
* - When `to` is zero, ``from``'s tokens were burned.
* - `from` and `to` are never both zero.
* - `batchSize` is non-zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 firstTokenId,
uint256 batchSize
) internal virtual {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721VF compliant contract.
*/
interface IERC721VF is IERC165 {
error ERC721VFAddressZeroIsNotAValidOwner();
error ERC721VFInvalidTokenID(uint256 tokenId);
error ERC721VFApprovalToCurrentOwner(address to, uint256 tokenId);
error ERC721VFApproveCallerIsNotTokenOwnerOrApprovedForAll(
address to,
uint256 tokenId
);
error ERC721VFCallerIsNotTokenOwnerOrApproved(
address from,
address to,
uint256 tokenId
);
error ERC721VFTransferToNonERC721VFReceiverImplementer(
address to,
uint256 tokenId
);
error ERC721VFAddressAndQuantitiesNeedToBeEqualLength();
error ERC721VFMintToTheZeroAddress();
error ERC721VFTokenAlreadyMinted(uint256 tokenId);
error ERC721VFTransferToTheZeroAddress();
error ERC721VFTransferFromIncorrectOwner(address from, uint256 tokenId);
error ERC721VFApproveToCaller();
error ERC721VFBurnCallerIsNotTokenOwnerOrApproved(
address from,
uint256 tokenId
);
error ERC721VFMintingPermanentlyLocked();
error ERC721VFMintIsNotActive();
error ERC721VFBurnIsNotActive();
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(
address indexed from,
address indexed to,
uint256 indexed tokenId
);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(
address indexed owner,
address indexed approved,
uint256 indexed tokenId
);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(
address indexed owner,
address indexed operator,
bool approved
);
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
* or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
* understand this adds an external call which potentially creates a reentrancy vulnerability.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId)
external
view
returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator)
external
view
returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
interface ITokenURIGeneratorVF {
/**
* @dev Update the access control contract
*
* Requirements:
*
* - the caller must be an admin role
* - `controlContractAddress` must support the IVFAccesControl interface
*/
function setControlContract(address controlContractAddress) external;
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
import {OperatorFilterer} from "./OperatorFilterer.sol";
/**
* @title DefaultOperatorFilterer
* @notice Inherits from OperatorFilterer and automatically subscribes to the default OpenSea subscription.
*/
abstract contract DefaultOperatorFilterer is OperatorFilterer {
address constant DEFAULT_SUBSCRIPTION = address(0x3cc6CddA760b79bAfa08dF41ECFA224f810dCeB6);
constructor() OperatorFilterer(DEFAULT_SUBSCRIPTION, true) {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
interface IOperatorFilterRegistry {
function isOperatorAllowed(address registrant, address operator) external view returns (bool);
function register(address registrant) external;
function registerAndSubscribe(address registrant, address subscription) external;
function registerAndCopyEntries(address registrant, address registrantToCopy) external;
function unregister(address addr) external;
function updateOperator(address registrant, address operator, bool filtered) external;
function updateOperators(address registrant, address[] calldata operators, bool filtered) external;
function updateCodeHash(address registrant, bytes32 codehash, bool filtered) external;
function updateCodeHashes(address registrant, bytes32[] calldata codeHashes, bool filtered) external;
function subscribe(address registrant, address registrantToSubscribe) external;
function unsubscribe(address registrant, bool copyExistingEntries) external;
function subscriptionOf(address addr) external returns (address registrant);
function subscribers(address registrant) external returns (address[] memory);
function subscriberAt(address registrant, uint256 index) external returns (address);
function copyEntriesOf(address registrant, address registrantToCopy) external;
function isOperatorFiltered(address registrant, address operator) external returns (bool);
function isCodeHashOfFiltered(address registrant, address operatorWithCode) external returns (bool);
function isCodeHashFiltered(address registrant, bytes32 codeHash) external returns (bool);
function filteredOperators(address addr) external returns (address[] memory);
function filteredCodeHashes(address addr) external returns (bytes32[] memory);
function filteredOperatorAt(address registrant, uint256 index) external returns (address);
function filteredCodeHashAt(address registrant, uint256 index) external returns (bytes32);
function isRegistered(address addr) external returns (bool);
function codeHashOf(address addr) external returns (bytes32);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
import {IOperatorFilterRegistry} from "./IOperatorFilterRegistry.sol";
/**
* @title OperatorFilterer
* @notice Abstract contract whose constructor automatically registers and optionally subscribes to or copies another
* registrant's entries in the OperatorFilterRegistry.
* @dev This smart contract is meant to be inherited by token contracts so they can use the following:
* - `onlyAllowedOperator` modifier for `transferFrom` and `safeTransferFrom` methods.
* - `onlyAllowedOperatorApproval` modifier for `approve` and `setApprovalForAll` methods.
*/
abstract contract OperatorFilterer {
error OperatorNotAllowed(address operator);
IOperatorFilterRegistry public constant OPERATOR_FILTER_REGISTRY =
IOperatorFilterRegistry(0x000000000000AAeB6D7670E522A718067333cd4E);
constructor(address subscriptionOrRegistrantToCopy, bool subscribe) {
// If an inheriting token contract is deployed to a network without the registry deployed, the modifier
// will not revert, but the contract will need to be registered with the registry once it is deployed in
// order for the modifier to filter addresses.
if (address(OPERATOR_FILTER_REGISTRY).code.length > 0) {
if (subscribe) {
OPERATOR_FILTER_REGISTRY.registerAndSubscribe(address(this), subscriptionOrRegistrantToCopy);
} else {
if (subscriptionOrRegistrantToCopy != address(0)) {
OPERATOR_FILTER_REGISTRY.registerAndCopyEntries(address(this), subscriptionOrRegistrantToCopy);
} else {
OPERATOR_FILTER_REGISTRY.register(address(this));
}
}
}
}
modifier onlyAllowedOperator(address from) virtual {
// Allow spending tokens from addresses with balance
// Note that this still allows listings and marketplaces with escrow to transfer tokens if transferred
// from an EOA.
if (from != msg.sender) {
_checkFilterOperator(msg.sender);
}
_;
}
modifier onlyAllowedOperatorApproval(address operator) virtual {
_checkFilterOperator(operator);
_;
}
function _checkFilterOperator(address operator) internal view virtual {
// Check registry code length to facilitate testing in environments without a deployed registry.
if (address(OPERATOR_FILTER_REGISTRY).code.length > 0) {
if (!OPERATOR_FILTER_REGISTRY.isOperatorAllowed(address(this), operator)) {
revert OperatorNotAllowed(operator);
}
}
}
}