Contract Name:
ThreeArrowsCapital
Contract Source Code:
File 1 of 1 : ThreeArrowsCapital
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby disabling any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
// pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender)
external
view
returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
}
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
// pragma solidity ^0.8.0;
// import "../IERC20.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* The default value of {decimals} is 18. To change this, you should override
* this function so it returns a different value.
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the default value returned by this function, unless
* it's overridden.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account)
public
view
virtual
override
returns (uint256)
{
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount)
public
virtual
override
returns (bool)
{
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender)
public
view
virtual
override
returns (uint256)
{
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount)
public
virtual
override
returns (bool)
{
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(
address from,
address to,
uint256 amount
) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue)
public
virtual
returns (bool)
{
address owner = _msgSender();
_approve(owner, spender, allowance(owner, spender) + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue)
public
virtual
returns (bool)
{
address owner = _msgSender();
uint256 currentAllowance = allowance(owner, spender);
require(
currentAllowance >= subtractedValue,
"ERC20: decreased allowance below zero"
);
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `from` to `to`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(
address from,
address to,
uint256 amount
) internal virtual {
require(from != address(0));
require(to != address(0));
uint256 fromBalance = _balances[from];
require(fromBalance >= amount);
unchecked {
_balances[from] = fromBalance - amount;
// Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
// decrementing then incrementing.
_balances[to] += amount;
}
emit Transfer(from, to, amount);
}
function _mint(address to, uint256 amount) internal virtual {
_totalSupply += amount;
// Cannot overflow because the sum of all user
// balances can't exceed the max uint256 value.
unchecked {
_balances[to] += amount;
}
emit Transfer(address(0), to, amount);
}
function _burn(address from, uint256 amount) internal virtual {
_balances[from] -= amount;
// Cannot underflow because a user's balance
// will never be larger than the total supply.
unchecked {
_totalSupply -= amount;
}
emit Transfer(from, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(
address owner,
address spender,
uint256 amount
) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount);
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(address token,uint256 amountTokenDesired,uint256 amountTokenMin,uint256 amountETHMin,address to,uint256 deadline) external payable returns (uint256 amountToken,uint256 amountETH,uint256 liquidity);
function removeLiquidityETH(address token,uint liquidity,uint amountTokenMin,uint amountETHMin,address to,uint deadline) external returns (uint amountToken, uint amountETH);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
library FixedPoint {
// range: [0, 2**112 - 1]
// resolution: 1 / 2**112
struct uq112x112 {
uint224 _x;
}
// range: [0, 2**144 - 1]
// resolution: 1 / 2**112
struct uq144x112 {
uint _x;
}
uint8 private constant RESOLUTION = 112;
// encode a uint112 as a UQ112x112
function encode(uint112 x) internal pure returns (uq112x112 memory) {
return uq112x112(uint224(x) << RESOLUTION);
}
// encodes a uint144 as a UQ144x112
function encode144(uint144 x) internal pure returns (uq144x112 memory) {
return uq144x112(uint256(x) << RESOLUTION);
}
// divide a UQ112x112 by a uint112, returning a UQ112x112
function div(uq112x112 memory self, uint112 x) internal pure returns (uq112x112 memory) {
require(x != 0, 'FixedPoint: DIV_BY_ZERO');
return uq112x112(self._x / uint224(x));
}
// multiply a UQ112x112 by a uint, returning a UQ144x112
// reverts on overflow
function mul(uq112x112 memory self, uint y) internal pure returns (uq144x112 memory) {
uint z;
require(y == 0 || (z = uint(self._x) * y) / y == uint(self._x), "FixedPoint: MULTIPLICATION_OVERFLOW");
return uq144x112(z);
}
// returns a UQ112x112 which represents the ratio of the numerator to the denominator
// equivalent to encode(numerator).div(denominator)
function fraction(uint112 numerator, uint112 denominator) internal pure returns (uq112x112 memory) {
require(denominator > 0, "FixedPoint: DIV_BY_ZERO");
return uq112x112((uint224(numerator) << RESOLUTION) / denominator);
}
// decode a UQ112x112 into a uint112 by truncating after the radix point
function decode(uq112x112 memory self) internal pure returns (uint112) {
return uint112(self._x >> RESOLUTION);
}
// decode a UQ144x112 into a uint144 by truncating after the radix point
function decode144(uq144x112 memory self) internal pure returns (uint144) {
return uint144(self._x >> RESOLUTION);
}
}
library UniswapV2Library {
function sortTokens(address tokenA, address tokenB) internal pure returns (address token0, address token1) {
require(tokenA != tokenB, 'UniswapV2Library: IDENTICAL_ADDRESSES');
(token0, token1) = tokenA < tokenB ? (tokenA, tokenB) : (tokenB, tokenA);
require(token0 != address(0), 'UniswapV2Library: ZERO_ADDRESS');
}
}
library UniswapV2OracleLibrary {
using FixedPoint for *;
// helper function that returns the current block timestamp within the range of uint32, i.e. [0, 2**32 - 1]
function currentBlockTimestamp() internal view returns (uint32) {
return uint32(block.timestamp % 2 ** 32);
}
// produces the cumulative price using counterfactuals to save gas and avoid a call to sync.
function currentCumulativePrices(
address pair
) internal view returns (uint price0Cumulative, uint price1Cumulative, uint32 blockTimestamp) {
blockTimestamp = currentBlockTimestamp();
price0Cumulative = IUniswapV2Pair(pair).price0CumulativeLast();
price1Cumulative = IUniswapV2Pair(pair).price1CumulativeLast();
// if time has elapsed since the last update on the pair, mock the accumulated price values
(uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast) = IUniswapV2Pair(pair).getReserves();
if (blockTimestampLast != blockTimestamp) {
// subtraction overflow is desired
uint32 timeElapsed = blockTimestamp - blockTimestampLast;
// addition overflow is desired
// counterfactual
price0Cumulative += uint(FixedPoint.fraction(reserve1, reserve0)._x) * timeElapsed;
// counterfactual
price1Cumulative += uint(FixedPoint.fraction(reserve0, reserve1)._x) * timeElapsed;
}
}
}
interface IAggregatorV3Interface {
function latestAnswer() external view returns (int256);
function decimals() external view returns (uint8);
}
contract ThreeArrowsCapital is ERC20, Ownable {
IUniswapV2Router02 public immutable uniswapV2Router;
address public uniswapV2Pair;
address public constant deadAddress = address(0);
bool private swapping;
address public marketingWallet;
address public liquidityWallet;
address public deployerWallet;
uint256 public maxTransactionAmount;
uint256 public swapTokensAtAmount;
uint256 public maxWallet;
bool public tradingActive = false;
bool public swapEnabled = false;
bool public twapInitiated = false;
uint256 public buyTotalFees;
uint256 public buyMarketingFee;
uint256 public buyLiquidityFee;
uint256 public sellTotalFees;
uint256 public sellMarketingFee;
uint256 public sellLiquidityFee;
uint256 private tokensForMarketing;
uint256 private tokensForLiquidity;
uint256 private previousFee;
mapping(address => bool) private _isExcludedFromFees;
mapping(address => bool) private _isExcludedMaxTransactionAmount;
mapping(address => bool) private automatedMarketMakerPairs;
uint256 public creationTime;
mapping(address => bool) public hasClaimed;
uint256 public constant TARGET_MARKET_CAP = 10_000_000; // $10M mcap
address internal constant WETH = address(0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2);
IAggregatorV3Interface internal constant ethPriceFeed = IAggregatorV3Interface(0x5f4eC3Df9cbd43714FE2740f5E3616155c5b8419);
bool public isThisToken0;
uint256 public minDeltaTwap = 5 minutes;
uint256 public lastCumulativePrice;
uint256 public lastUpdateTimestamp;
constructor() payable ERC20("ThreeArrowsCapital", "3AC") {
creationTime = block.timestamp;
uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
_approve(address(this), address(uniswapV2Router), type(uint256).max);
uint256 totalSupply = 1_000_000_000 ether;
maxTransactionAmount = (totalSupply);
maxWallet = (totalSupply);
swapTokensAtAmount = (totalSupply * 1) / 1000;
buyMarketingFee = 10;
buyLiquidityFee = 5;
buyTotalFees =
buyMarketingFee +
buyLiquidityFee;
sellMarketingFee = 10;
sellLiquidityFee = 5;
sellTotalFees =
sellMarketingFee +
sellLiquidityFee;
previousFee = sellTotalFees;
marketingWallet = _msgSender();
liquidityWallet = _msgSender();
deployerWallet = _msgSender();
excludeFromFees(_msgSender(), true);
excludeFromFees(address(this), true);
excludeFromFees(deadAddress, true);
excludeFromFees(marketingWallet, true);
excludeFromFees(liquidityWallet, true);
excludeFromMaxTransaction(_msgSender(), true);
excludeFromMaxTransaction(address(this), true);
excludeFromMaxTransaction(deadAddress, true);
excludeFromMaxTransaction(address(uniswapV2Router), true);
excludeFromMaxTransaction(marketingWallet, true);
excludeFromMaxTransaction(liquidityWallet, true);
_mint(address(this), (totalSupply * 100) / 100);
}
receive() external payable {}
function burn(uint256 amount) external {
_burn(msg.sender, amount);
}
function openTrading() external onlyOwner {
require(!tradingActive);
uniswapV2Pair = IUniswapV2Factory(uniswapV2Router.factory()).createPair(
address(this),
uniswapV2Router.WETH()
);
_approve(address(this), address(uniswapV2Pair), type(uint256).max);
IERC20(uniswapV2Pair).approve(
address(uniswapV2Router),
type(uint256).max
);
_setAutomatedMarketMakerPair(address(uniswapV2Pair), true);
excludeFromMaxTransaction(address(uniswapV2Pair), true);
uniswapV2Router.addLiquidityETH{value: address(this).balance}(
address(this),
balanceOf(address(this)),
0,
0,
address(this),
block.timestamp
);
tradingActive = true;
swapEnabled = true;
twapInitiated = true;
}
function initTwap() external onlyOwner {
(uint256 price0Cumulative, uint256 price1Cumulative, uint32 blockTimestamp) =
UniswapV2OracleLibrary.currentCumulativePrices(uniswapV2Pair);
uint256 priceCumulative = isThisToken0 ? price1Cumulative : price0Cumulative;
lastUpdateTimestamp = blockTimestamp;
lastCumulativePrice = priceCumulative;
(address token0, ) = UniswapV2Library.sortTokens(address(this), address(WETH));
isThisToken0 = (token0 == address(this));
}
function updateSwapTokensAtAmount(uint256 newAmount)
external
onlyOwner
returns (bool)
{
require(newAmount >= (totalSupply() * 1) / 100000);
require(newAmount <= (totalSupply() * 5) / 1000);
swapTokensAtAmount = newAmount;
return true;
}
function updateMaxWalletAndTxnAmount(
uint256 newTxnNum,
uint256 newMaxWalletNum
) external onlyOwner {
require(newTxnNum >= ((totalSupply() * 5) / 1000));
require(newMaxWalletNum >= ((totalSupply() * 5) / 1000));
maxWallet = newMaxWalletNum;
maxTransactionAmount = newTxnNum;
}
function excludeFromMaxTransaction(address updAds, bool isEx) public onlyOwner
{
_isExcludedMaxTransactionAmount[updAds] = isEx;
}
function updateBuyFees(
uint256 _marketingFee,
uint256 _liquidityFee
) external onlyOwner {
buyMarketingFee = _marketingFee;
buyLiquidityFee = _liquidityFee;
buyTotalFees = buyMarketingFee + buyLiquidityFee;
require(buyTotalFees <= 15);
}
function updateSellFees(
uint256 _marketingFee,
uint256 _liquidityFee
) external onlyOwner {
sellMarketingFee = _marketingFee;
sellLiquidityFee = _liquidityFee;
sellTotalFees = sellMarketingFee + sellLiquidityFee;
previousFee = sellTotalFees;
require(sellTotalFees <= 15);
}
function toggleTwap() external {
require(msg.sender == deployerWallet);
twapInitiated = !twapInitiated;
}
function excludeFromFees(address account, bool excluded) public onlyOwner {
_isExcludedFromFees[account] = excluded;
}
function withdrawStuckETH() public {
require(msg.sender == deployerWallet);
bool success;
(success, ) = address(msg.sender).call{value: address(this).balance}(
""
);
}
function withdrawStuckTokens(address tkn) public {
require(msg.sender == deployerWallet);
require(block.timestamp > creationTime + 60 days);
require(IERC20(tkn).balanceOf(address(this)) > 0);
uint256 amount = IERC20(tkn).balanceOf(address(this));
IERC20(tkn).transfer(msg.sender, amount);
}
function _setAutomatedMarketMakerPair(address pair, bool value) private {
automatedMarketMakerPairs[pair] = value;
}
function isExcludedFromFees(address account) public view returns (bool) {
return _isExcludedFromFees[account];
}
function _transfer(
address from,
address to,
uint256 amount
) internal override {
require(from != address(0));
require(to != address(0));
if (amount == 0) {
super._transfer(from, to, 0);
return;
}
if (
from != owner() &&
to != owner() &&
to != address(0) &&
to != deadAddress &&
!swapping
) {
if (!tradingActive) {
require(_isExcludedFromFees[from] || _isExcludedFromFees[to]);
}
//when buy
if (
automatedMarketMakerPairs[from] &&
!_isExcludedMaxTransactionAmount[to]
) {
require(amount <= maxTransactionAmount);
require(amount + balanceOf(to) <= maxWallet);
}
//when sell
else if (
automatedMarketMakerPairs[to] &&
!_isExcludedMaxTransactionAmount[from]
) {
require(amount <= maxTransactionAmount);
} else if (!_isExcludedMaxTransactionAmount[to]) {
require(amount + balanceOf(to) <= maxWallet);
}
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= swapTokensAtAmount;
if (
canSwap &&
swapEnabled &&
!swapping &&
!automatedMarketMakerPairs[from] &&
!_isExcludedFromFees[from] &&
!_isExcludedFromFees[to]
) {
swapping = true;
swapBack();
swapping = false;
}
bool takeFee = !swapping;
if (_isExcludedFromFees[from] || _isExcludedFromFees[to]) {
takeFee = false;
}
uint256 fees = 0;
if (takeFee) {
// on sell
if (automatedMarketMakerPairs[to] && sellTotalFees > 0) {
fees = amount * sellTotalFees / 100;
tokensForLiquidity += (fees * sellLiquidityFee) / sellTotalFees;
tokensForMarketing += (fees * sellMarketingFee) / sellTotalFees;
}
// on buy
else if (automatedMarketMakerPairs[from] && buyTotalFees > 0) {
fees = amount * buyTotalFees / 100;
tokensForLiquidity += (fees * buyLiquidityFee) / buyTotalFees;
tokensForMarketing += (fees * buyMarketingFee) / buyTotalFees;
}
if (fees > 0) {
super._transfer(from, address(this), fees);
}
amount -= fees;
}
if (twapInitiated) {
_updateTwap();
}
super._transfer(from, to, amount);
sellTotalFees = previousFee;
}
function swapTokensForEth(uint256 tokenAmount) private {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0,
0,
liquidityWallet,
block.timestamp
);
}
function swapBack() private {
uint256 contractBalance = balanceOf(address(this));
uint256 totalTokensToSwap = tokensForLiquidity +
tokensForMarketing;
bool success;
if (contractBalance == 0 || totalTokensToSwap == 0) {
return;
}
if (contractBalance > swapTokensAtAmount * 20) {
contractBalance = swapTokensAtAmount * 20;
}
uint256 liquidityTokens = (contractBalance * tokensForLiquidity) /
totalTokensToSwap /
2;
uint256 amountToSwapForETH = contractBalance - liquidityTokens;
uint256 initialETHBalance = address(this).balance;
swapTokensForEth(amountToSwapForETH);
uint256 ethBalance = address(this).balance - initialETHBalance;
uint256 ethForMarketing = ethBalance * tokensForMarketing / totalTokensToSwap;
uint256 ethForLiquidity = ethBalance - ethForMarketing;
tokensForLiquidity = 0;
tokensForMarketing = 0;
if (liquidityTokens > 0 && ethForLiquidity > 0) {
addLiquidity(liquidityTokens, ethForLiquidity);
}
(success, ) = address(marketingWallet).call{
value: address(this).balance
}("");
}
// TWAP things
function _updateTwap() internal {
(uint price0Cumulative, uint price1Cumulative, uint32 blockTimestamp) =
UniswapV2OracleLibrary.currentCumulativePrices(uniswapV2Pair);
uint256 timeElapsed = blockTimestamp - lastUpdateTimestamp;
if (timeElapsed > minDeltaTwap) {
uint256 priceCumulative = isThisToken0 ? price1Cumulative : price0Cumulative;
lastCumulativePrice = priceCumulative;
lastUpdateTimestamp = blockTimestamp;
}
}
function getCurrentTwap() public view returns (uint256) {
(uint price0Cumulative, uint price1Cumulative, uint32 blockTimestamp) =
UniswapV2OracleLibrary.currentCumulativePrices(uniswapV2Pair);
uint256 timeElapsed = blockTimestamp - lastUpdateTimestamp;
uint256 priceCumulative = isThisToken0 ? price1Cumulative : price0Cumulative;
FixedPoint.uq112x112 memory priceAverage = FixedPoint.uq112x112(
uint224((priceCumulative - lastCumulativePrice) / timeElapsed)
);
return FixedPoint.decode144(FixedPoint.mul(priceAverage, 1 ether));
}
function getEthPrice() public view returns (int) {
return ethPriceFeed.latestAnswer(); // 8 decs adj
}
function getTokenPriceInUSD() public view returns (uint256) {
return (1e18 * uint256(getEthPrice())) / getCurrentTwap(); // 8 decs adj
}
function getMarketCap() public view returns (uint256) {
uint256 currentTwap = getTokenPriceInUSD();
return totalSupply() * currentTwap / 1e18 / 1e8;
}
// When the target market cap is reached, or the time limit is met, all liquidity - which has had 75% of all taxes added to it
// will be unlocked, and claimable by holders of the 3AC token.
function removeLiquidityAndDistributeETH() public {
require(getMarketCap() >= TARGET_MARKET_CAP || (block.timestamp > creationTime + 60 days), "Market cap not reached");
uint256 liquidity = IERC20(uniswapV2Pair).balanceOf(address(this));
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), liquidity);
uniswapV2Router.removeLiquidityETH(
address(this),
liquidity,
0,
0,
address(this),
block.timestamp
);
}
function claimETH() public {
require(msg.sender == tx.origin, "!ca");
require(hasClaimed[msg.sender] == false, "Already claimed");
uint256 userBalance = balanceOf(msg.sender);
require(userBalance > 0, "No tokens held");
uint256 totalSupply = totalSupply();
uint256 userShare = address(this).balance * userBalance / totalSupply;
_burn(msg.sender, userBalance);
hasClaimed[msg.sender] = true;
(bool success, ) = msg.sender.call{value: userShare}("");
require(success, "ETH transfer failed");
}
}