Contract Source Code:
File 1 of 1 : QuickToken
pragma solidity ^0.5.16;
pragma experimental ABIEncoderV2;
// From https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/math/Math.sol
// Subject to the MIT license.
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the addition of two unsigned integers, reverting with custom message on overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, errorMessage);
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on underflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot underflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction underflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on underflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot underflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, errorMessage);
return c;
}
/**
* @dev Returns the integer division of two unsigned integers.
* Reverts on division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers.
* Reverts with custom message on division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
contract QuickToken {
/// @notice EIP-20 token name for this token
string public constant name = "QuickSwap";
/// @notice EIP-20 token symbol for this token
string public constant symbol = "QUICK";
/// @notice EIP-20 token decimals for this token
uint8 public constant decimals = 18;
/// @notice Total number of tokens in circulation
uint public totalSupply = 1_000_000_000e18; // 1 Billion QUICK
/// @notice Address which may mint new tokens
address public minter;
/// @notice The timestamp after which minting may occur
uint public mintingAllowedAfter;
/// @notice Minimum time between mints
uint32 public constant minimumTimeBetweenMints = 1 days * 365;
/// @notice Cap on the percentage of totalSupply that can be minted at each mint
uint8 public constant mintCap = 2;
/// @notice Allowance amounts on behalf of others
mapping (address => mapping (address => uint96)) internal allowances;
/// @notice Official record of token balances for each account
mapping (address => uint96) internal balances;
/// @notice An event thats emitted when the minter address is changed
event MinterChanged(address minter, address newMinter);
/// @notice The standard EIP-20 transfer event
event Transfer(address indexed from, address indexed to, uint256 amount);
/// @notice The standard EIP-20 approval event
event Approval(address indexed owner, address indexed spender, uint256 amount);
/**
* @notice Construct a new Quick token
* @param account The initial account to grant all the tokens
* @param minter_ The account with minting ability
* @param mintingAllowedAfter_ The timestamp after which minting may occur
*/
constructor(address account, address minter_, uint mintingAllowedAfter_) public {
require(mintingAllowedAfter_ >= block.timestamp, "Quick::constructor: minting can only begin after deployment");
balances[account] = uint96(totalSupply);
emit Transfer(address(0), account, totalSupply);
minter = minter_;
emit MinterChanged(address(0), minter);
mintingAllowedAfter = mintingAllowedAfter_;
}
/**
* @notice Change the minter address
* @param minter_ The address of the new minter
*/
function setMinter(address minter_) external {
require(msg.sender == minter, "Quick::setMinter: only the minter can change the minter address");
emit MinterChanged(minter, minter_);
minter = minter_;
}
/**
* @notice Mint new tokens
* @param dst The address of the destination account
* @param rawAmount The number of tokens to be minted
*/
function mint(address dst, uint rawAmount) external {
require(msg.sender == minter, "Quick::mint: only the minter can mint");
require(block.timestamp >= mintingAllowedAfter, "Quick::mint: minting not allowed yet");
require(dst != address(0), "Quick::mint: cannot transfer to the zero address");
// record the mint
mintingAllowedAfter = SafeMath.add(block.timestamp, minimumTimeBetweenMints);
// mint the amount
uint96 amount = safe96(rawAmount, "Quick::mint: amount exceeds 96 bits");
require(amount <= SafeMath.div(SafeMath.mul(totalSupply, mintCap), 100), "Quick::mint: exceeded mint cap");
totalSupply = safe96(SafeMath.add(totalSupply, amount), "Quick::mint: totalSupply exceeds 96 bits");
// transfer the amount to the recipient
balances[dst] = add96(balances[dst], amount, "Quick::mint: transfer amount overflows");
emit Transfer(address(0), dst, amount);
}
/**
* @notice Get the number of tokens `spender` is approved to spend on behalf of `account`
* @param account The address of the account holding the funds
* @param spender The address of the account spending the funds
* @return The number of tokens approved
*/
function allowance(address account, address spender) external view returns (uint) {
return allowances[account][spender];
}
/**
* @notice Approve `spender` to transfer up to `amount` from `src`
* @dev This will overwrite the approval amount for `spender`
* and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
* @param spender The address of the account which may transfer tokens
* @param rawAmount The number of tokens that are approved (2^256-1 means infinite)
* @return Whether or not the approval succeeded
*/
function approve(address spender, uint rawAmount) external returns (bool) {
uint96 amount;
if (rawAmount == uint(-1)) {
amount = uint96(-1);
} else {
amount = safe96(rawAmount, "Quick::approve: amount exceeds 96 bits");
}
allowances[msg.sender][spender] = amount;
emit Approval(msg.sender, spender, amount);
return true;
}
/**
* @notice Get the number of tokens held by the `account`
* @param account The address of the account to get the balance of
* @return The number of tokens held
*/
function balanceOf(address account) external view returns (uint) {
return balances[account];
}
/**
* @notice Transfer `amount` tokens from `msg.sender` to `dst`
* @param dst The address of the destination account
* @param rawAmount The number of tokens to transfer
* @return Whether or not the transfer succeeded
*/
function transfer(address dst, uint rawAmount) external returns (bool) {
uint96 amount = safe96(rawAmount, "Quick::transfer: amount exceeds 96 bits");
_transferTokens(msg.sender, dst, amount);
return true;
}
/**
* @notice Transfer `amount` tokens from `src` to `dst`
* @param src The address of the source account
* @param dst The address of the destination account
* @param rawAmount The number of tokens to transfer
* @return Whether or not the transfer succeeded
*/
function transferFrom(address src, address dst, uint rawAmount) external returns (bool) {
address spender = msg.sender;
uint96 spenderAllowance = allowances[src][spender];
uint96 amount = safe96(rawAmount, "Quick::approve: amount exceeds 96 bits");
if (spender != src && spenderAllowance != uint96(-1)) {
uint96 newAllowance = sub96(spenderAllowance, amount, "Quick::transferFrom: transfer amount exceeds spender allowance");
allowances[src][spender] = newAllowance;
emit Approval(src, spender, newAllowance);
}
_transferTokens(src, dst, amount);
return true;
}
function _transferTokens(address src, address dst, uint96 amount) internal {
require(src != address(0), "Quick::_transferTokens: cannot transfer from the zero address");
require(dst != address(0), "Quick::_transferTokens: cannot transfer to the zero address");
balances[src] = sub96(balances[src], amount, "Quick::_transferTokens: transfer amount exceeds balance");
balances[dst] = add96(balances[dst], amount, "Quick::_transferTokens: transfer amount overflows");
emit Transfer(src, dst, amount);
}
function safe32(uint n, string memory errorMessage) internal pure returns (uint32) {
require(n < 2**32, errorMessage);
return uint32(n);
}
function safe96(uint n, string memory errorMessage) internal pure returns (uint96) {
require(n < 2**96, errorMessage);
return uint96(n);
}
function add96(uint96 a, uint96 b, string memory errorMessage) internal pure returns (uint96) {
uint96 c = a + b;
require(c >= a, errorMessage);
return c;
}
function sub96(uint96 a, uint96 b, string memory errorMessage) internal pure returns (uint96) {
require(b <= a, errorMessage);
return a - b;
}
}