Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.8.19;

import {IERC20, ERC20, ERC20Pausable} from "@openzeppelin/contracts/token/ERC20/extensions/ERC20Pausable.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {AccessControl} from "@openzeppelin/contracts/access/AccessControl.sol";

/// @title Interface for ERC20 Burnable Token
interface IERC20Burnable is IERC20 {
    /**
     * @dev Destroys `amount` tokens from the caller, reducing the total supply.
     * @param amount The amount of tokens to burn.
     */
    function burn(uint256 amount) external;
}

/**
 * @title MATR Vesting Contract
 * @notice Contract module used to lock MATR tokens during the vesting period. It allows for time-based vesting and token claims.
 * @dev Inherits from AccessControl for role-based permissions, and ERC20Pausable for pause functionality. The contract uses SafeERC20 for safe token transfers.
 */
contract vMATR is AccessControl, ERC20Pausable {
    using SafeERC20 for IERC20Burnable;

    /// @notice Custom error for zero address operations.
    error ZeroAddressPasted();

    /// @notice Custom error for invalid start time operations.
    error InvalidStartTime(uint256 currentStartTime);

    /// @notice Custom error for setting a start time that is not in the future.
    error StartTimeMustBeGreaterThanCurrent(uint256 givenStartTime);

    /// @notice Custom error when distribution start time is not set.
    error DistributionStartTimeIsNotSet();

    /// @notice Custom error when the given claim amount exceeds the allowable limit.
    error GivenAmountIsTooBig(uint256 requiredAmount, uint256 givenAmount);

    /// @notice Custom error when there is no claimable amount available.
    error NoClaimableAmount();

    /// @notice Custom error when vesting has not started.
    error VestingNotStarted();

    /// @notice Custom error for transfers by non-whitelisted addresses.
    error OnlyWhitelistedTransfer();

    /// @notice Custom error for removing an invalid address from the whitelist.
    error InvalidAddressToRemove(address toRemove);

    /// @notice Role identifier for pausers.
    bytes32 public constant PAUSER_ROLE = keccak256("PAUSER_ROLE");

    /// @notice Multiplier constants for vesting calculation.
    uint256 private constant VESTING_TIME = 20 days;

    /// @notice ERC20 token contract being held.
    IERC20Burnable public acceptedToken;

    /// @notice Distribution start timestamp.
    uint256 public distributionStartTime;

    /// @notice KYA (Know Your Asset) information.
    string public kya;

    /// @notice Whitelist for transferable addresses.
    mapping(address => bool) public whitelisted;

    /// @notice Record of claim amounts.
    mapping(address => uint256) public claimings;

    /// @notice Vesting multipliers.
    mapping(uint256 => uint256) public multiplier;

    /// @notice Emitted when a user claims tokens.
    event Claim(address indexed owner, uint256 amount);

    /// @notice Emitted when accepted token is set.
    event AcceptedTokenSet(address _acceptedToken);

    /// @notice Emitted when distribution start time is set.
    event StartTimeSet(uint256 startTime);

    /// @notice Emitted when an address is added to the whitelist.
    event WhitelistedAddressAdded(address whitelisted);

    /// @notice Emitted when an address is removed from the whitelist.
    event WhitelistedAddressRemoved(address removed);

    /// @notice Emitted when KYA information is set.
    event KYAset(string kya);

    /// @dev Modifier to check for zero address input.
    modifier zeroAddressCheck(address _address) {
        if (_address == address(0)) {
            revert ZeroAddressPasted();
        }
        _;
    }

    /// @dev Modifier to ensure distribution time is set.
    modifier isDistributionTimeSet() {
        if (distributionStartTime == 0) {
            revert DistributionStartTimeIsNotSet();
        }
        _;
    }

    /**
     * @dev Sets up roles and initializes the contract.
     * Grants `DEFAULT_ADMIN_ROLE` and `PAUSER_ROLE` to the deployer.
     */
    constructor() ERC20("vMATR", "vMATR") {
        _grantRole(DEFAULT_ADMIN_ROLE, msg.sender);
        _grantRole(PAUSER_ROLE, msg.sender);

        for (uint8 i = 0; i < 10; ) {
            multiplier[i] = i + 1;
            unchecked {
                ++i;
            }
        }
    }

    /**
     * @dev Sets the accepted ERC20 token for vesting.
     * @param _token The address of the ERC20 token to be accepted.
     */
    function setAcceptedToken(
        address _token
    ) external onlyRole(DEFAULT_ADMIN_ROLE) zeroAddressCheck(_token) {
        acceptedToken = IERC20Burnable(_token);
        emit AcceptedTokenSet(_token);
    }

    /**
     * @dev Deposits a specific amount of the accepted token for vesting.
     * @param _amount The amount of tokens to deposit.
     */
    function deposit(uint256 _amount) external onlyRole(DEFAULT_ADMIN_ROLE) {
        _mint(msg.sender, _amount);
        acceptedToken.safeTransferFrom(msg.sender, address(this), _amount);
    }

    /**
     * @dev Sets the KYA information.
     * @param _knowYourAsset The KYA string.
     */
    function setKYA(
        string calldata _knowYourAsset
    ) external onlyRole(DEFAULT_ADMIN_ROLE) {
        kya = _knowYourAsset;
        emit KYAset(_knowYourAsset);
    }

    /**
     * @dev Adds an address to the transfer whitelist.
     * @param _address The address to whitelist.
     */
    function addWhitelistedAddress(
        address _address
    ) external onlyRole(DEFAULT_ADMIN_ROLE) zeroAddressCheck(_address) {
        whitelisted[_address] = true;
        emit WhitelistedAddressAdded(_address);
    }

    /**
     * @dev Removes an address from the transfer whitelist.
     * @param _address The address to remove from the whitelist.
     */
    function removeWhitelistedAddress(
        address _address
    ) external onlyRole(DEFAULT_ADMIN_ROLE) {
        if (whitelisted[_address] == false) {
            revert InvalidAddressToRemove(_address);
        }

        whitelisted[_address] = false;
        emit WhitelistedAddressRemoved(_address);
    }

    /**
     * @dev Sets the distribution start time for vesting.
     * @param startTime The start time as a Unix timestamp.
     */
    function setStartTime(
        uint256 startTime
    ) external onlyRole(DEFAULT_ADMIN_ROLE) {
        if (
            (distributionStartTime != 0 && startTime > distributionStartTime) ||
            startTime < block.timestamp
        ) {
            revert InvalidStartTime(startTime);
        }

        if (distributionStartTime != startTime) {
            distributionStartTime = startTime;
            emit StartTimeSet(startTime);
        }
    }

    /**
     * @dev Pauses all token transfers.
     * This function can only be called by accounts with the `PAUSER_ROLE`.
     */
    function pause() external onlyRole(PAUSER_ROLE) {
        _pause();
    }

    /**
     * @dev Unpauses all token transfers.
     * This function can only be called by accounts with the `PAUSER_ROLE`.
     */
    function unpause() external onlyRole(PAUSER_ROLE) {
        _unpause();
    }

    /**
     * @dev Burns a specific amount of vMATR tokens and releases equivalent balance of acceptedToken.
     * @param amount The amount of vMATR tokens to burn.
     */
    function claim(uint256 amount) external {
        uint requiredAmount = getClaimableAmount(msg.sender);
        if (requiredAmount < amount) {
            revert GivenAmountIsTooBig(requiredAmount, amount);
        }

        _claim(amount);
    }

    /**
     * @dev Burns a specific amount of vMATR tokens.
     * @param amount The amount of vMATR tokens to burn.
     */
    function burn(uint256 amount) external {
        _burn(msg.sender, amount);
        acceptedToken.burn(amount);
    }

    /**
     * @dev Burns a specific amount of vMATR tokens from a given account.
     * @param tokensOwner The owner of the tokens to burn.
     * @param amount The amount of vMATR tokens to burn.
     */
    function burnFrom(address tokensOwner, uint256 amount) external {
        _spendAllowance(tokensOwner, msg.sender, amount);
        _burn(tokensOwner, amount);
        acceptedToken.burn(amount);
    }

    /**
     * @dev Claims the maximum available amount from the caller's holdings.
     */
    function claimMaximumAmount() external {
        uint256 requiredAmount = getClaimableAmount(msg.sender);
        if (requiredAmount == 0) {
            revert NoClaimableAmount();
        }

        _claim(requiredAmount);
    }

    /**
     * @dev Calculates the claimable amount for a specific address.
     * @param awarded The address to calculate the claimable amount for.
     * @return amount The claimable amount for the address.
     */
    function getClaimableAmount(
        address awarded
    ) public view isDistributionTimeSet returns (uint256 amount) {
        uint256 current = currentVestingPeriodSinceStartTime();
        uint256 _claimings = claimings[awarded];
        uint256 balanceOnAuction = balanceOf(awarded) + _claimings;

        if (current < 10) {
            return ((balanceOnAuction * multiplier[current]) / 10) - _claimings;
        } else {
            return balanceOf(awarded);
        }
    }

    /**
     * @notice Calculates the number of vesting periods that have passed since the distribution start time.
     * @dev Calculates the elapsed vesting periods based on the `distributionStartTime` and `VESTING_TIME`.
     * @return currentQuarter The number of elapsed vesting periods since the distribution start time.
     * @custom:error VestingNotStarted Thrown if the current timestamp is before the `distributionStartTime`.
     */
    function currentVestingPeriodSinceStartTime()
        public
        view
        isDistributionTimeSet
        returns (uint256 currentQuarter)
    {
        uint256 startTime = distributionStartTime;

        if (startTime > block.timestamp) {
            revert VestingNotStarted();
        }

        return (block.timestamp - startTime) / VESTING_TIME;
    }

    /**
     * @notice Retrieves the total amount of the accepted token currently locked in the contract.
     * @dev Returns the balance of the accepted token (`acceptedToken`) held by this contract.
     *      This amount should always be equal to the total supply of the vMATR token.
     * @return balanceOfAcceptedToken The total amount of the accepted token currently locked in this contract.
     */
    function getCurrentLockedAmount()
        external
        view
        returns (uint256 balanceOfAcceptedToken)
    {
        balanceOfAcceptedToken = acceptedToken.balanceOf(address(this));
    }

    /**
     * @notice Enforces transfer restrictions, allowing only whitelisted addresses to transfer tokens.
     * @dev Overrides `_beforeTokenTransfer` to include whitelist checks. Allows minting and burning by default.
     * @param from The address transferring the tokens.
     * @param to The address receiving the tokens.
     * @param amount The amount of tokens being transferred.
     * @custom:error OnlyWhitelistedTransfer Thrown if the sender is not whitelisted for transfers.
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal override {
        super._beforeTokenTransfer(from, to, amount);

        // Allow minting and burning
        if (from == address(0) || to == address(0)) {
            return;
        }

        if (!whitelisted[from]) {
            revert OnlyWhitelistedTransfer();
        }
    }

    /**
     * @notice Internal function to handle claims of the accepted token by burning vMATR tokens.
     * @dev Burns `amount` of vMATR tokens from the caller's balance and transfers the same amount of accepted tokens.
     *      Also updates the `claimings` state to reflect the claimed amount.
     * @param amount The amount of vMATR tokens to burn and the equivalent amount of accepted tokens to claim.
     */
    function _claim(uint256 amount) internal {
        claimings[msg.sender] += amount;
        _burn(msg.sender, amount);

        acceptedToken.safeTransfer(msg.sender, amount);

        emit Claim(msg.sender, amount);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/AccessControl.sol)

pragma solidity ^0.8.0;

import "./IAccessControl.sol";
import "../utils/Context.sol";
import "../utils/Strings.sol";
import "../utils/introspection/ERC165.sol";

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```solidity
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```solidity
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it. We recommend using {AccessControlDefaultAdminRules}
 * to enforce additional security measures for this role.
 */
abstract contract AccessControl is Context, IAccessControl, ERC165 {
    struct RoleData {
        mapping(address => bool) members;
        bytes32 adminRole;
    }

    mapping(bytes32 => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with a standardized message including the required role.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     *
     * _Available since v4.1._
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role);
        _;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view virtual override returns (bool) {
        return _roles[role].members[account];
    }

    /**
     * @dev Revert with a standard message if `_msgSender()` is missing `role`.
     * Overriding this function changes the behavior of the {onlyRole} modifier.
     *
     * Format of the revert message is described in {_checkRole}.
     *
     * _Available since v4.6._
     */
    function _checkRole(bytes32 role) internal view virtual {
        _checkRole(role, _msgSender());
    }

    /**
     * @dev Revert with a standard message if `account` is missing `role`.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     */
    function _checkRole(bytes32 role, address account) internal view virtual {
        if (!hasRole(role, account)) {
            revert(
                string(
                    abi.encodePacked(
                        "AccessControl: account ",
                        Strings.toHexString(account),
                        " is missing role ",
                        Strings.toHexString(uint256(role), 32)
                    )
                )
            );
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view virtual override returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleGranted} event.
     */
    function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleRevoked} event.
     */
    function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been revoked `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     *
     * May emit a {RoleRevoked} event.
     */
    function renounceRole(bytes32 role, address account) public virtual override {
        require(account == _msgSender(), "AccessControl: can only renounce roles for self");

        _revokeRole(role, account);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * May emit a {RoleGranted} event.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     *
     * NOTE: This function is deprecated in favor of {_grantRole}.
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        bytes32 previousAdminRole = getRoleAdmin(role);
        _roles[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleGranted} event.
     */
    function _grantRole(bytes32 role, address account) internal virtual {
        if (!hasRole(role, account)) {
            _roles[role].members[account] = true;
            emit RoleGranted(role, account, _msgSender());
        }
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleRevoked} event.
     */
    function _revokeRole(bytes32 role, address account) internal virtual {
        if (hasRole(role, account)) {
            _roles[role].members[account] = false;
            emit RoleRevoked(role, account, _msgSender());
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControl.sol)

pragma solidity ^0.8.0;

/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControl {
    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     *
     * _Available since v3.1._
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {AccessControl-_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (security/Pausable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor() {
        _paused = false;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        _requireNotPaused();
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        _requirePaused();
        _;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Throws if the contract is paused.
     */
    function _requireNotPaused() internal view virtual {
        require(!paused(), "Pausable: paused");
    }

    /**
     * @dev Throws if the contract is not paused.
     */
    function _requirePaused() internal view virtual {
        require(paused(), "Pausable: not paused");
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(address from, address to, uint256 amount) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 amount) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/ERC20Pausable.sol)

pragma solidity ^0.8.0;

import "../ERC20.sol";
import "../../../security/Pausable.sol";

/**
 * @dev ERC20 token with pausable token transfers, minting and burning.
 *
 * Useful for scenarios such as preventing trades until the end of an evaluation
 * period, or having an emergency switch for freezing all token transfers in the
 * event of a large bug.
 *
 * IMPORTANT: This contract does not include public pause and unpause functions. In
 * addition to inheriting this contract, you must define both functions, invoking the
 * {Pausable-_pause} and {Pausable-_unpause} internal functions, with appropriate
 * access control, e.g. using {AccessControl} or {Ownable}. Not doing so will
 * make the contract unpausable.
 */
abstract contract ERC20Pausable is ERC20, Pausable {
    /**
     * @dev See {ERC20-_beforeTokenTransfer}.
     *
     * Requirements:
     *
     * - the contract must not be paused.
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override {
        super._beforeTokenTransfer(from, to, amount);

        require(!paused(), "ERC20Pausable: token transfer while paused");
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
     * Revert on invalid signature.
     */
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return
            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1, "Math: mulDiv overflow");

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

import "./math/Math.sol";
import "./math/SignedMath.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toString(int256 value) internal pure returns (string memory) {
        return string(abi.encodePacked(value < 0 ? "-" : "", toString(SignedMath.abs(value))));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return keccak256(bytes(a)) == keccak256(bytes(b));
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"DistributionStartTimeIsNotSet","type":"error"},{"inputs":[{"internalType":"uint256","name":"requiredAmount","type":"uint256"},{"internalType":"uint256","name":"givenAmount","type":"uint256"}],"name":"GivenAmountIsTooBig","type":"error"},{"inputs":[{"internalType":"address","name":"toRemove","type":"address"}],"name":"InvalidAddressToRemove","type":"error"},{"inputs":[{"internalType":"uint256","name":"currentStartTime","type":"uint256"}],"name":"InvalidStartTime","type":"error"},{"inputs":[],"name":"NoClaimableAmount","type":"error"},{"inputs":[],"name":"OnlyWhitelistedTransfer","type":"error"},{"inputs":[{"internalType":"uint256","name":"givenStartTime","type":"uint256"}],"name":"StartTimeMustBeGreaterThanCurrent","type":"error"},{"inputs":[],"name":"VestingNotStarted","type":"error"},{"inputs":[],"name":"ZeroAddressPasted","type":"error"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"_acceptedToken","type":"address"}],"name":"AcceptedTokenSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Claim","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"string","name":"kya","type":"string"}],"name":"KYAset","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Paused","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"startTime","type":"uint256"}],"name":"StartTimeSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Unpaused","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"whitelisted","type":"address"}],"name":"WhitelistedAddressAdded","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"removed","type":"address"}],"name":"WhitelistedAddressRemoved","type":"event"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"PAUSER_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"acceptedToken","outputs":[{"internalType":"contract IERC20Burnable","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_address","type":"address"}],"name":"addWhitelistedAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"tokensOwner","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burnFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"claim","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"claimMaximumAmount","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"claimings","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"currentVestingPeriodSinceStartTime","outputs":[{"internalType":"uint256","name":"currentQuarter","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"deposit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"distributionStartTime","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"awarded","type":"address"}],"name":"getClaimableAmount","outputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getCurrentLockedAmount","outputs":[{"internalType":"uint256","name":"balanceOfAcceptedToken","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"kya","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"multiplier","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"paused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_address","type":"address"}],"name":"removeWhitelistedAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_token","type":"address"}],"name":"setAcceptedToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"string","name":"_knowYourAsset","type":"string"}],"name":"setKYA","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"startTime","type":"uint256"}],"name":"setStartTime","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"unpause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"whitelisted","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"}]

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