ERC-20
Stablecoin
Overview
Max Total Supply
166,935,467.389498874646285872 alUSD
Holders
1,676 (0.00%)
Market
Price
$0.98 @ 0.000387 ETH (+0.13%)
Onchain Market Cap
$162,863,577.47
Circulating Supply Market Cap
$162,744,413.00
Other Info
Token Contract (WITH 18 Decimals)
Balance
0.7999 alUSDValue
$0.78 ( ~0.000309168678638527 Eth) [0.0000%]Loading...
Loading
Loading...
Loading
Loading...
Loading
# | Exchange | Pair | Price | 24H Volume | % Volume |
---|
Contract Name:
AlToken
Compiler Version
v0.6.12+commit.27d51765
Optimization Enabled:
Yes with 999999 runs
Other Settings:
default evmVersion
Contract Source Code (Solidity Standard Json-Input format)
// SPDX-License-Identifier: GPL-3.0 pragma solidity ^0.6.12; pragma experimental ABIEncoderV2; import {AccessControl} from "@openzeppelin/contracts/access/AccessControl.sol"; import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol"; import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol"; import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol"; import {IDetailedERC20} from "./interfaces/IDetailedERC20.sol"; /// @title AlToken /// /// @dev This is the contract for the Alchemix utillity token usd. /// /// Initially, the contract deployer is given both the admin and minter role. This allows them to pre-mine tokens, /// transfer admin to a timelock contract, and lastly, grant the staking pools the minter role. After this is done, /// the deployer must revoke their admin role and minter role. contract AlToken is AccessControl, ERC20("Alchemix USD", "alUSD") { using SafeERC20 for ERC20; /// @dev The identifier of the role which maintains other roles. bytes32 public constant ADMIN_ROLE = keccak256("ADMIN"); /// @dev The identifier of the role which allows accounts to mint tokens. bytes32 public constant SENTINEL_ROLE = keccak256("SENTINEL"); /// @dev addresses whitelisted for minting new tokens mapping (address => bool) public whiteList; /// @dev addresses blacklisted for minting new tokens mapping (address => bool) public blacklist; /// @dev addresses paused for minting new tokens mapping (address => bool) public paused; /// @dev ceiling per address for minting new tokens mapping (address => uint256) public ceiling; /// @dev already minted amount per address to track the ceiling mapping (address => uint256) public hasMinted; event Paused(address alchemistAddress, bool isPaused); constructor() public { _setupRole(ADMIN_ROLE, msg.sender); _setupRole(SENTINEL_ROLE, msg.sender); _setRoleAdmin(SENTINEL_ROLE,ADMIN_ROLE); _setRoleAdmin(ADMIN_ROLE,ADMIN_ROLE); } /// @dev A modifier which checks if whitelisted for minting. modifier onlyWhitelisted() { require(whiteList[msg.sender], "AlUSD: Alchemist is not whitelisted"); _; } /// @dev Mints tokens to a recipient. /// /// This function reverts if the caller does not have the minter role. /// /// @param _recipient the account to mint tokens to. /// @param _amount the amount of tokens to mint. function mint(address _recipient, uint256 _amount) external onlyWhitelisted { require(!blacklist[msg.sender], "AlUSD: Alchemist is blacklisted."); uint256 _total = _amount.add(hasMinted[msg.sender]); require(_total <= ceiling[msg.sender],"AlUSD: Alchemist's ceiling was breached."); require(!paused[msg.sender], "AlUSD: user is currently paused."); hasMinted[msg.sender] = hasMinted[msg.sender].add(_amount); _mint(_recipient, _amount); } /// This function reverts if the caller does not have the admin role. /// /// @param _toWhitelist the account to mint tokens to. /// @param _state the whitelist state. function setWhitelist(address _toWhitelist, bool _state) external onlyAdmin { whiteList[_toWhitelist] = _state; } /// This function reverts if the caller does not have the admin role. /// /// @param _newSentinel the account to set as sentinel. function setSentinel(address _newSentinel) external onlyAdmin { _setupRole(SENTINEL_ROLE, _newSentinel); } /// This function reverts if the caller does not have the admin role. /// /// @param _toBlacklist the account to mint tokens to. function setBlacklist(address _toBlacklist) external onlySentinel { blacklist[_toBlacklist] = true; } /// This function reverts if the caller does not have the admin role. function pauseAlchemist(address _toPause, bool _state) external onlySentinel { paused[_toPause] = _state; Paused(_toPause, _state); } /// This function reverts if the caller does not have the admin role. /// /// @param _toSetCeiling the account set the ceiling off. /// @param _ceiling the max amount of tokens the account is allowed to mint. function setCeiling(address _toSetCeiling, uint256 _ceiling) external onlyAdmin { ceiling[_toSetCeiling] = _ceiling; } /// @dev A modifier which checks that the caller has the admin role. modifier onlyAdmin() { require(hasRole(ADMIN_ROLE, msg.sender), "only admin"); _; } /// @dev A modifier which checks that the caller has the sentinel role. modifier onlySentinel() { require(hasRole(SENTINEL_ROLE, msg.sender), "only sentinel"); _; } /** * @dev Destroys `amount` tokens from the caller. * * See {ERC20-_burn}. */ function burn(uint256 amount) public virtual { _burn(_msgSender(), amount); } /** * @dev Destroys `amount` tokens from `account`, deducting from the caller's * allowance. * * See {ERC20-_burn} and {ERC20-allowance}. * * Requirements: * * - the caller must have allowance for ``accounts``'s tokens of at least * `amount`. */ function burnFrom(address account, uint256 amount) public virtual { uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, "ERC20: burn amount exceeds allowance"); _approve(account, _msgSender(), decreasedAllowance); _burn(account, amount); } /** * @dev lowers hasminted from the caller's allocation * */ function lowerHasMinted( uint256 amount) public onlyWhitelisted { hasMinted[msg.sender] = hasMinted[msg.sender].sub(amount); } }
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0 <0.8.0; import "../utils/EnumerableSet.sol"; import "../utils/Address.sol"; import "../GSN/Context.sol"; /** * @dev Contract module that allows children to implement role-based access * control mechanisms. * * Roles are referred to by their `bytes32` identifier. These should be exposed * in the external API and be unique. The best way to achieve this is by * using `public constant` hash digests: * * ``` * bytes32 public constant MY_ROLE = keccak256("MY_ROLE"); * ``` * * Roles can be used to represent a set of permissions. To restrict access to a * function call, use {hasRole}: * * ``` * function foo() public { * require(hasRole(MY_ROLE, msg.sender)); * ... * } * ``` * * Roles can be granted and revoked dynamically via the {grantRole} and * {revokeRole} functions. Each role has an associated admin role, and only * accounts that have a role's admin role can call {grantRole} and {revokeRole}. * * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means * that only accounts with this role will be able to grant or revoke other * roles. More complex role relationships can be created by using * {_setRoleAdmin}. * * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to * grant and revoke this role. Extra precautions should be taken to secure * accounts that have been granted it. */ abstract contract AccessControl is Context { using EnumerableSet for EnumerableSet.AddressSet; using Address for address; struct RoleData { EnumerableSet.AddressSet members; bytes32 adminRole; } mapping (bytes32 => RoleData) private _roles; bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00; /** * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole` * * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite * {RoleAdminChanged} not being emitted signaling this. * * _Available since v3.1._ */ event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole); /** * @dev Emitted when `account` is granted `role`. * * `sender` is the account that originated the contract call, an admin role * bearer except when using {_setupRole}. */ event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender); /** * @dev Emitted when `account` is revoked `role`. * * `sender` is the account that originated the contract call: * - if using `revokeRole`, it is the admin role bearer * - if using `renounceRole`, it is the role bearer (i.e. `account`) */ event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender); /** * @dev Returns `true` if `account` has been granted `role`. */ function hasRole(bytes32 role, address account) public view returns (bool) { return _roles[role].members.contains(account); } /** * @dev Returns the number of accounts that have `role`. Can be used * together with {getRoleMember} to enumerate all bearers of a role. */ function getRoleMemberCount(bytes32 role) public view returns (uint256) { return _roles[role].members.length(); } /** * @dev Returns one of the accounts that have `role`. `index` must be a * value between 0 and {getRoleMemberCount}, non-inclusive. * * Role bearers are not sorted in any particular way, and their ordering may * change at any point. * * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure * you perform all queries on the same block. See the following * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post] * for more information. */ function getRoleMember(bytes32 role, uint256 index) public view returns (address) { return _roles[role].members.at(index); } /** * @dev Returns the admin role that controls `role`. See {grantRole} and * {revokeRole}. * * To change a role's admin, use {_setRoleAdmin}. */ function getRoleAdmin(bytes32 role) public view returns (bytes32) { return _roles[role].adminRole; } /** * @dev Grants `role` to `account`. * * If `account` had not been already granted `role`, emits a {RoleGranted} * event. * * Requirements: * * - the caller must have ``role``'s admin role. */ function grantRole(bytes32 role, address account) public virtual { require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to grant"); _grantRole(role, account); } /** * @dev Revokes `role` from `account`. * * If `account` had been granted `role`, emits a {RoleRevoked} event. * * Requirements: * * - the caller must have ``role``'s admin role. */ function revokeRole(bytes32 role, address account) public virtual { require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to revoke"); _revokeRole(role, account); } /** * @dev Revokes `role` from the calling account. * * Roles are often managed via {grantRole} and {revokeRole}: this function's * purpose is to provide a mechanism for accounts to lose their privileges * if they are compromised (such as when a trusted device is misplaced). * * If the calling account had been granted `role`, emits a {RoleRevoked} * event. * * Requirements: * * - the caller must be `account`. */ function renounceRole(bytes32 role, address account) public virtual { require(account == _msgSender(), "AccessControl: can only renounce roles for self"); _revokeRole(role, account); } /** * @dev Grants `role` to `account`. * * If `account` had not been already granted `role`, emits a {RoleGranted} * event. Note that unlike {grantRole}, this function doesn't perform any * checks on the calling account. * * [WARNING] * ==== * This function should only be called from the constructor when setting * up the initial roles for the system. * * Using this function in any other way is effectively circumventing the admin * system imposed by {AccessControl}. * ==== */ function _setupRole(bytes32 role, address account) internal virtual { _grantRole(role, account); } /** * @dev Sets `adminRole` as ``role``'s admin role. * * Emits a {RoleAdminChanged} event. */ function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual { emit RoleAdminChanged(role, _roles[role].adminRole, adminRole); _roles[role].adminRole = adminRole; } function _grantRole(bytes32 role, address account) private { if (_roles[role].members.add(account)) { emit RoleGranted(role, account, _msgSender()); } } function _revokeRole(bytes32 role, address account) private { if (_roles[role].members.remove(account)) { emit RoleRevoked(role, account, _msgSender()); } } }
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0 <0.8.0; import "../../GSN/Context.sol"; import "./IERC20.sol"; import "../../math/SafeMath.sol"; /** * @dev Implementation of the {IERC20} interface. * * This implementation is agnostic to the way tokens are created. This means * that a supply mechanism has to be added in a derived contract using {_mint}. * For a generic mechanism see {ERC20PresetMinterPauser}. * * TIP: For a detailed writeup see our guide * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How * to implement supply mechanisms]. * * We have followed general OpenZeppelin guidelines: functions revert instead * of returning `false` on failure. This behavior is nonetheless conventional * and does not conflict with the expectations of ERC20 applications. * * Additionally, an {Approval} event is emitted on calls to {transferFrom}. * This allows applications to reconstruct the allowance for all accounts just * by listening to said events. Other implementations of the EIP may not emit * these events, as it isn't required by the specification. * * Finally, the non-standard {decreaseAllowance} and {increaseAllowance} * functions have been added to mitigate the well-known issues around setting * allowances. See {IERC20-approve}. */ contract ERC20 is Context, IERC20 { using SafeMath for uint256; mapping (address => uint256) private _balances; mapping (address => mapping (address => uint256)) private _allowances; uint256 private _totalSupply; string private _name; string private _symbol; uint8 private _decimals; /** * @dev Sets the values for {name} and {symbol}, initializes {decimals} with * a default value of 18. * * To select a different value for {decimals}, use {_setupDecimals}. * * All three of these values are immutable: they can only be set once during * construction. */ constructor (string memory name_, string memory symbol_) public { _name = name_; _symbol = symbol_; _decimals = 18; } /** * @dev Returns the name of the token. */ function name() public view returns (string memory) { return _name; } /** * @dev Returns the symbol of the token, usually a shorter version of the * name. */ function symbol() public view returns (string memory) { return _symbol; } /** * @dev Returns the number of decimals used to get its user representation. * For example, if `decimals` equals `2`, a balance of `505` tokens should * be displayed to a user as `5,05` (`505 / 10 ** 2`). * * Tokens usually opt for a value of 18, imitating the relationship between * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is * called. * * NOTE: This information is only used for _display_ purposes: it in * no way affects any of the arithmetic of the contract, including * {IERC20-balanceOf} and {IERC20-transfer}. */ function decimals() public view returns (uint8) { return _decimals; } /** * @dev See {IERC20-totalSupply}. */ function totalSupply() public view override returns (uint256) { return _totalSupply; } /** * @dev See {IERC20-balanceOf}. */ function balanceOf(address account) public view override returns (uint256) { return _balances[account]; } /** * @dev See {IERC20-transfer}. * * Requirements: * * - `recipient` cannot be the zero address. * - the caller must have a balance of at least `amount`. */ function transfer(address recipient, uint256 amount) public virtual override returns (bool) { _transfer(_msgSender(), recipient, amount); return true; } /** * @dev See {IERC20-allowance}. */ function allowance(address owner, address spender) public view virtual override returns (uint256) { return _allowances[owner][spender]; } /** * @dev See {IERC20-approve}. * * Requirements: * * - `spender` cannot be the zero address. */ function approve(address spender, uint256 amount) public virtual override returns (bool) { _approve(_msgSender(), spender, amount); return true; } /** * @dev See {IERC20-transferFrom}. * * Emits an {Approval} event indicating the updated allowance. This is not * required by the EIP. See the note at the beginning of {ERC20}. * * Requirements: * * - `sender` and `recipient` cannot be the zero address. * - `sender` must have a balance of at least `amount`. * - the caller must have allowance for ``sender``'s tokens of at least * `amount`. */ function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) { _transfer(sender, recipient, amount); _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance")); return true; } /** * @dev Atomically increases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. */ function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) { _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue)); return true; } /** * @dev Atomically decreases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. * - `spender` must have allowance for the caller of at least * `subtractedValue`. */ function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) { _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero")); return true; } /** * @dev Moves tokens `amount` from `sender` to `recipient`. * * This is internal function is equivalent to {transfer}, and can be used to * e.g. implement automatic token fees, slashing mechanisms, etc. * * Emits a {Transfer} event. * * Requirements: * * - `sender` cannot be the zero address. * - `recipient` cannot be the zero address. * - `sender` must have a balance of at least `amount`. */ function _transfer(address sender, address recipient, uint256 amount) internal virtual { require(sender != address(0), "ERC20: transfer from the zero address"); require(recipient != address(0), "ERC20: transfer to the zero address"); _beforeTokenTransfer(sender, recipient, amount); _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance"); _balances[recipient] = _balances[recipient].add(amount); emit Transfer(sender, recipient, amount); } /** @dev Creates `amount` tokens and assigns them to `account`, increasing * the total supply. * * Emits a {Transfer} event with `from` set to the zero address. * * Requirements: * * - `to` cannot be the zero address. */ function _mint(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: mint to the zero address"); _beforeTokenTransfer(address(0), account, amount); _totalSupply = _totalSupply.add(amount); _balances[account] = _balances[account].add(amount); emit Transfer(address(0), account, amount); } /** * @dev Destroys `amount` tokens from `account`, reducing the * total supply. * * Emits a {Transfer} event with `to` set to the zero address. * * Requirements: * * - `account` cannot be the zero address. * - `account` must have at least `amount` tokens. */ function _burn(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: burn from the zero address"); _beforeTokenTransfer(account, address(0), amount); _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance"); _totalSupply = _totalSupply.sub(amount); emit Transfer(account, address(0), amount); } /** * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens. * * This internal function is equivalent to `approve`, and can be used to * e.g. set automatic allowances for certain subsystems, etc. * * Emits an {Approval} event. * * Requirements: * * - `owner` cannot be the zero address. * - `spender` cannot be the zero address. */ function _approve(address owner, address spender, uint256 amount) internal virtual { require(owner != address(0), "ERC20: approve from the zero address"); require(spender != address(0), "ERC20: approve to the zero address"); _allowances[owner][spender] = amount; emit Approval(owner, spender, amount); } /** * @dev Sets {decimals} to a value other than the default one of 18. * * WARNING: This function should only be called from the constructor. Most * applications that interact with token contracts will not expect * {decimals} to ever change, and may work incorrectly if it does. */ function _setupDecimals(uint8 decimals_) internal { _decimals = decimals_; } /** * @dev Hook that is called before any transfer of tokens. This includes * minting and burning. * * Calling conditions: * * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens * will be to transferred to `to`. * - when `from` is zero, `amount` tokens will be minted for `to`. * - when `to` is zero, `amount` of ``from``'s tokens will be burned. * - `from` and `to` are never both zero. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { } }
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0 <0.8.0; import "./IERC20.sol"; import "../../math/SafeMath.sol"; import "../../utils/Address.sol"; /** * @title SafeERC20 * @dev Wrappers around ERC20 operations that throw on failure (when the token * contract returns false). Tokens that return no value (and instead revert or * throw on failure) are also supported, non-reverting calls are assumed to be * successful. * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract, * which allows you to call the safe operations as `token.safeTransfer(...)`, etc. */ library SafeERC20 { using SafeMath for uint256; using Address for address; function safeTransfer(IERC20 token, address to, uint256 value) internal { _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value)); } function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal { _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value)); } /** * @dev Deprecated. This function has issues similar to the ones found in * {IERC20-approve}, and its usage is discouraged. * * Whenever possible, use {safeIncreaseAllowance} and * {safeDecreaseAllowance} instead. */ function safeApprove(IERC20 token, address spender, uint256 value) internal { // safeApprove should only be called when setting an initial allowance, // or when resetting it to zero. To increase and decrease it, use // 'safeIncreaseAllowance' and 'safeDecreaseAllowance' // solhint-disable-next-line max-line-length require((value == 0) || (token.allowance(address(this), spender) == 0), "SafeERC20: approve from non-zero to non-zero allowance" ); _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value)); } function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal { uint256 newAllowance = token.allowance(address(this), spender).add(value); _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance)); } function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal { uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero"); _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance)); } /** * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement * on the return value: the return value is optional (but if data is returned, it must not be false). * @param token The token targeted by the call. * @param data The call data (encoded using abi.encode or one of its variants). */ function _callOptionalReturn(IERC20 token, bytes memory data) private { // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that // the target address contains contract code and also asserts for success in the low-level call. bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed"); if (returndata.length > 0) { // Return data is optional // solhint-disable-next-line max-line-length require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed"); } } }
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0 <0.8.0; import "../GSN/Context.sol"; /** * @dev Contract module which provides a basic access control mechanism, where * there is an account (an owner) that can be granted exclusive access to * specific functions. * * By default, the owner account will be the one that deploys the contract. This * can later be changed with {transferOwnership}. * * This module is used through inheritance. It will make available the modifier * `onlyOwner`, which can be applied to your functions to restrict their use to * the owner. */ abstract contract Ownable is Context { address private _owner; event OwnershipTransferred(address indexed previousOwner, address indexed newOwner); /** * @dev Initializes the contract setting the deployer as the initial owner. */ constructor () internal { address msgSender = _msgSender(); _owner = msgSender; emit OwnershipTransferred(address(0), msgSender); } /** * @dev Returns the address of the current owner. */ function owner() public view returns (address) { return _owner; } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { require(_owner == _msgSender(), "Ownable: caller is not the owner"); _; } /** * @dev Leaves the contract without owner. It will not be possible to call * `onlyOwner` functions anymore. Can only be called by the current owner. * * NOTE: Renouncing ownership will leave the contract without an owner, * thereby removing any functionality that is only available to the owner. */ function renounceOwnership() public virtual onlyOwner { emit OwnershipTransferred(_owner, address(0)); _owner = address(0); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Can only be called by the current owner. */ function transferOwnership(address newOwner) public virtual onlyOwner { require(newOwner != address(0), "Ownable: new owner is the zero address"); emit OwnershipTransferred(_owner, newOwner); _owner = newOwner; } }
// SPDX-License-Identifier: GPL-3.0 pragma solidity ^0.6.12; import "@openzeppelin/contracts/token/ERC20/IERC20.sol"; interface IDetailedERC20 is IERC20 { function name() external returns (string memory); function symbol() external returns (string memory); function decimals() external returns (uint8); }
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0 <0.8.0; /** * @dev Library for managing * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive * types. * * Sets have the following properties: * * - Elements are added, removed, and checked for existence in constant time * (O(1)). * - Elements are enumerated in O(n). No guarantees are made on the ordering. * * ``` * contract Example { * // Add the library methods * using EnumerableSet for EnumerableSet.AddressSet; * * // Declare a set state variable * EnumerableSet.AddressSet private mySet; * } * ``` * * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`) * and `uint256` (`UintSet`) are supported. */ library EnumerableSet { // To implement this library for multiple types with as little code // repetition as possible, we write it in terms of a generic Set type with // bytes32 values. // The Set implementation uses private functions, and user-facing // implementations (such as AddressSet) are just wrappers around the // underlying Set. // This means that we can only create new EnumerableSets for types that fit // in bytes32. struct Set { // Storage of set values bytes32[] _values; // Position of the value in the `values` array, plus 1 because index 0 // means a value is not in the set. mapping (bytes32 => uint256) _indexes; } /** * @dev Add a value to a set. O(1). * * Returns true if the value was added to the set, that is if it was not * already present. */ function _add(Set storage set, bytes32 value) private returns (bool) { if (!_contains(set, value)) { set._values.push(value); // The value is stored at length-1, but we add 1 to all indexes // and use 0 as a sentinel value set._indexes[value] = set._values.length; return true; } else { return false; } } /** * @dev Removes a value from a set. O(1). * * Returns true if the value was removed from the set, that is if it was * present. */ function _remove(Set storage set, bytes32 value) private returns (bool) { // We read and store the value's index to prevent multiple reads from the same storage slot uint256 valueIndex = set._indexes[value]; if (valueIndex != 0) { // Equivalent to contains(set, value) // To delete an element from the _values array in O(1), we swap the element to delete with the last one in // the array, and then remove the last element (sometimes called as 'swap and pop'). // This modifies the order of the array, as noted in {at}. uint256 toDeleteIndex = valueIndex - 1; uint256 lastIndex = set._values.length - 1; // When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs // so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement. bytes32 lastvalue = set._values[lastIndex]; // Move the last value to the index where the value to delete is set._values[toDeleteIndex] = lastvalue; // Update the index for the moved value set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based // Delete the slot where the moved value was stored set._values.pop(); // Delete the index for the deleted slot delete set._indexes[value]; return true; } else { return false; } } /** * @dev Returns true if the value is in the set. O(1). */ function _contains(Set storage set, bytes32 value) private view returns (bool) { return set._indexes[value] != 0; } /** * @dev Returns the number of values on the set. O(1). */ function _length(Set storage set) private view returns (uint256) { return set._values.length; } /** * @dev Returns the value stored at position `index` in the set. O(1). * * Note that there are no guarantees on the ordering of values inside the * array, and it may change when more values are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function _at(Set storage set, uint256 index) private view returns (bytes32) { require(set._values.length > index, "EnumerableSet: index out of bounds"); return set._values[index]; } // Bytes32Set struct Bytes32Set { Set _inner; } /** * @dev Add a value to a set. O(1). * * Returns true if the value was added to the set, that is if it was not * already present. */ function add(Bytes32Set storage set, bytes32 value) internal returns (bool) { return _add(set._inner, value); } /** * @dev Removes a value from a set. O(1). * * Returns true if the value was removed from the set, that is if it was * present. */ function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) { return _remove(set._inner, value); } /** * @dev Returns true if the value is in the set. O(1). */ function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) { return _contains(set._inner, value); } /** * @dev Returns the number of values in the set. O(1). */ function length(Bytes32Set storage set) internal view returns (uint256) { return _length(set._inner); } /** * @dev Returns the value stored at position `index` in the set. O(1). * * Note that there are no guarantees on the ordering of values inside the * array, and it may change when more values are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) { return _at(set._inner, index); } // AddressSet struct AddressSet { Set _inner; } /** * @dev Add a value to a set. O(1). * * Returns true if the value was added to the set, that is if it was not * already present. */ function add(AddressSet storage set, address value) internal returns (bool) { return _add(set._inner, bytes32(uint256(value))); } /** * @dev Removes a value from a set. O(1). * * Returns true if the value was removed from the set, that is if it was * present. */ function remove(AddressSet storage set, address value) internal returns (bool) { return _remove(set._inner, bytes32(uint256(value))); } /** * @dev Returns true if the value is in the set. O(1). */ function contains(AddressSet storage set, address value) internal view returns (bool) { return _contains(set._inner, bytes32(uint256(value))); } /** * @dev Returns the number of values in the set. O(1). */ function length(AddressSet storage set) internal view returns (uint256) { return _length(set._inner); } /** * @dev Returns the value stored at position `index` in the set. O(1). * * Note that there are no guarantees on the ordering of values inside the * array, and it may change when more values are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function at(AddressSet storage set, uint256 index) internal view returns (address) { return address(uint256(_at(set._inner, index))); } // UintSet struct UintSet { Set _inner; } /** * @dev Add a value to a set. O(1). * * Returns true if the value was added to the set, that is if it was not * already present. */ function add(UintSet storage set, uint256 value) internal returns (bool) { return _add(set._inner, bytes32(value)); } /** * @dev Removes a value from a set. O(1). * * Returns true if the value was removed from the set, that is if it was * present. */ function remove(UintSet storage set, uint256 value) internal returns (bool) { return _remove(set._inner, bytes32(value)); } /** * @dev Returns true if the value is in the set. O(1). */ function contains(UintSet storage set, uint256 value) internal view returns (bool) { return _contains(set._inner, bytes32(value)); } /** * @dev Returns the number of values on the set. O(1). */ function length(UintSet storage set) internal view returns (uint256) { return _length(set._inner); } /** * @dev Returns the value stored at position `index` in the set. O(1). * * Note that there are no guarantees on the ordering of values inside the * array, and it may change when more values are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function at(UintSet storage set, uint256 index) internal view returns (uint256) { return uint256(_at(set._inner, index)); } }
// SPDX-License-Identifier: MIT pragma solidity >=0.6.2 <0.8.0; /** * @dev Collection of functions related to the address type */ library Address { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * ==== * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * ==== */ function isContract(address account) internal view returns (bool) { // This method relies on extcodesize, which returns 0 for contracts in // construction, since the code is only stored at the end of the // constructor execution. uint256 size; // solhint-disable-next-line no-inline-assembly assembly { size := extcodesize(account) } return size > 0; } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require(address(this).balance >= amount, "Address: insufficient balance"); // solhint-disable-next-line avoid-low-level-calls, avoid-call-value (bool success, ) = recipient.call{ value: amount }(""); require(success, "Address: unable to send value, recipient may have reverted"); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain`call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCall(target, data, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) { return functionCallWithValue(target, data, value, "Address: low-level call with value failed"); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) { require(address(this).balance >= value, "Address: insufficient balance for call"); require(isContract(target), "Address: call to non-contract"); // solhint-disable-next-line avoid-low-level-calls (bool success, bytes memory returndata) = target.call{ value: value }(data); return _verifyCallResult(success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) { return functionStaticCall(target, data, "Address: low-level static call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) { require(isContract(target), "Address: static call to non-contract"); // solhint-disable-next-line avoid-low-level-calls (bool success, bytes memory returndata) = target.staticcall(data); return _verifyCallResult(success, returndata, errorMessage); } function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) { if (success) { return returndata; } else { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly // solhint-disable-next-line no-inline-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } } } }
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0 <0.8.0; /* * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with GSN meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract Context { function _msgSender() internal view virtual returns (address payable) { return msg.sender; } function _msgData() internal view virtual returns (bytes memory) { this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691 return msg.data; } }
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0 <0.8.0; /** * @dev Interface of the ERC20 standard as defined in the EIP. */ interface IERC20 { /** * @dev Returns the amount of tokens in existence. */ function totalSupply() external view returns (uint256); /** * @dev Returns the amount of tokens owned by `account`. */ function balanceOf(address account) external view returns (uint256); /** * @dev Moves `amount` tokens from the caller's account to `recipient`. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transfer(address recipient, uint256 amount) external returns (bool); /** * @dev Returns the remaining number of tokens that `spender` will be * allowed to spend on behalf of `owner` through {transferFrom}. This is * zero by default. * * This value changes when {approve} or {transferFrom} are called. */ function allowance(address owner, address spender) external view returns (uint256); /** * @dev Sets `amount` as the allowance of `spender` over the caller's tokens. * * Returns a boolean value indicating whether the operation succeeded. * * IMPORTANT: Beware that changing an allowance with this method brings the risk * that someone may use both the old and the new allowance by unfortunate * transaction ordering. One possible solution to mitigate this race * condition is to first reduce the spender's allowance to 0 and set the * desired value afterwards: * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 * * Emits an {Approval} event. */ function approve(address spender, uint256 amount) external returns (bool); /** * @dev Moves `amount` tokens from `sender` to `recipient` using the * allowance mechanism. `amount` is then deducted from the caller's * allowance. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transferFrom(address sender, address recipient, uint256 amount) external returns (bool); /** * @dev Emitted when `value` tokens are moved from one account (`from`) to * another (`to`). * * Note that `value` may be zero. */ event Transfer(address indexed from, address indexed to, uint256 value); /** * @dev Emitted when the allowance of a `spender` for an `owner` is set by * a call to {approve}. `value` is the new allowance. */ event Approval(address indexed owner, address indexed spender, uint256 value); }
// SPDX-License-Identifier: MIT pragma solidity >=0.6.0 <0.8.0; /** * @dev Wrappers over Solidity's arithmetic operations with added overflow * checks. * * Arithmetic operations in Solidity wrap on overflow. This can easily result * in bugs, because programmers usually assume that an overflow raises an * error, which is the standard behavior in high level programming languages. * `SafeMath` restores this intuition by reverting the transaction when an * operation overflows. * * Using this library instead of the unchecked operations eliminates an entire * class of bugs, so it's recommended to use it always. */ library SafeMath { /** * @dev Returns the addition of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `+` operator. * * Requirements: * * - Addition cannot overflow. */ function add(uint256 a, uint256 b) internal pure returns (uint256) { uint256 c = a + b; require(c >= a, "SafeMath: addition overflow"); return c; } /** * @dev Returns the subtraction of two unsigned integers, reverting on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub(uint256 a, uint256 b) internal pure returns (uint256) { return sub(a, b, "SafeMath: subtraction overflow"); } /** * @dev Returns the subtraction of two unsigned integers, reverting with custom message on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) { require(b <= a, errorMessage); uint256 c = a - b; return c; } /** * @dev Returns the multiplication of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `*` operator. * * Requirements: * * - Multiplication cannot overflow. */ function mul(uint256 a, uint256 b) internal pure returns (uint256) { // Gas optimization: this is cheaper than requiring 'a' not being zero, but the // benefit is lost if 'b' is also tested. // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522 if (a == 0) { return 0; } uint256 c = a * b; require(c / a == b, "SafeMath: multiplication overflow"); return c; } /** * @dev Returns the integer division of two unsigned integers. Reverts on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div(uint256 a, uint256 b) internal pure returns (uint256) { return div(a, b, "SafeMath: division by zero"); } /** * @dev Returns the integer division of two unsigned integers. Reverts with custom message on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) { require(b > 0, errorMessage); uint256 c = a / b; // assert(a == b * c + a % b); // There is no case in which this doesn't hold return c; } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * Reverts when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod(uint256 a, uint256 b) internal pure returns (uint256) { return mod(a, b, "SafeMath: modulo by zero"); } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * Reverts with custom message when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) { require(b != 0, errorMessage); return a % b; } }
{ "optimizer": { "enabled": true, "runs": 999999 }, "outputSelection": { "*": { "*": [ "evm.bytecode", "evm.deployedBytecode", "abi" ] } }, "metadata": { "useLiteralContent": true }, "libraries": {} }
Contract Security Audit
- No Contract Security Audit Submitted- Submit Audit Here
[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"alchemistAddress","type":"address"},{"indexed":false,"internalType":"bool","name":"isPaused","type":"bool"}],"name":"Paused","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"SENTINEL_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"blacklist","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burnFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"ceiling","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"uint256","name":"index","type":"uint256"}],"name":"getRoleMember","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleMemberCount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"hasMinted","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"lowerHasMinted","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_recipient","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"mint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_toPause","type":"address"},{"internalType":"bool","name":"_state","type":"bool"}],"name":"pauseAlchemist","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"paused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_toBlacklist","type":"address"}],"name":"setBlacklist","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_toSetCeiling","type":"address"},{"internalType":"uint256","name":"_ceiling","type":"uint256"}],"name":"setCeiling","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_newSentinel","type":"address"}],"name":"setSentinel","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_toWhitelist","type":"address"},{"internalType":"bool","name":"_state","type":"bool"}],"name":"setWhitelist","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"whiteList","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"}]
Contract Creation Code
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
Deployed Bytecode
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
Loading...
Loading
Loading...
Loading
[ Download: CSV Export ]
[ Download: CSV Export ]
A token is a representation of an on-chain or off-chain asset. The token page shows information such as price, total supply, holders, transfers and social links. Learn more about this page in our Knowledge Base.