Contract

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2019-2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

import "./interfaces/IInbox.sol";
import "./interfaces/IBridge.sol";
import "../rollup/Rollup.sol";

import "./Messages.sol";
import "../libraries/Cloneable.sol";
import "../libraries/Whitelist.sol";
import "../libraries/ProxyUtil.sol";
import "../libraries/AddressAliasHelper.sol";

import "@openzeppelin/contracts/utils/Address.sol";
import "./Bridge.sol";

contract Inbox is IInbox, WhitelistConsumer, Cloneable {
    uint8 internal constant ETH_TRANSFER = 0;
    uint8 internal constant L2_MSG = 3;
    uint8 internal constant L1MessageType_L2FundedByL1 = 7;
    uint8 internal constant L1MessageType_submitRetryableTx = 9;

    uint8 internal constant L2MessageType_unsignedEOATx = 0;
    uint8 internal constant L2MessageType_unsignedContractTx = 1;

    IBridge public override bridge;

    bool public isCreateRetryablePaused;
    bool public shouldRewriteSender;

    function initialize(IBridge _bridge, address _whitelist) external {
        require(address(bridge) == address(0), "ALREADY_INIT");
        bridge = _bridge;
        WhitelistConsumer.whitelist = _whitelist;
    }

    /**
     * @notice Send a generic L2 message to the chain
     * @dev This method is an optimization to avoid having to emit the entirety of the messageData in a log. Instead validators are expected to be able to parse the data from the transaction's input
     * @param messageData Data of the message being sent
     */
    function sendL2MessageFromOrigin(bytes calldata messageData)
        external
        onlyWhitelisted
        returns (uint256)
    {
        // solhint-disable-next-line avoid-tx-origin
        require(msg.sender == tx.origin, "origin only");
        uint256 msgNum = deliverToBridge(L2_MSG, msg.sender, keccak256(messageData));
        emit InboxMessageDeliveredFromOrigin(msgNum);
        return msgNum;
    }

    /**
     * @notice Send a generic L2 message to the chain
     * @dev This method can be used to send any type of message that doesn't require L1 validation
     * @param messageData Data of the message being sent
     */
    function sendL2Message(bytes calldata messageData)
        external
        override
        onlyWhitelisted
        returns (uint256)
    {
        uint256 msgNum = deliverToBridge(L2_MSG, msg.sender, keccak256(messageData));
        emit InboxMessageDelivered(msgNum, messageData);
        return msgNum;
    }

    function sendL1FundedUnsignedTransaction(
        uint256 maxGas,
        uint256 gasPriceBid,
        uint256 nonce,
        address destAddr,
        bytes calldata data
    ) external payable virtual override onlyWhitelisted returns (uint256) {
        return
            _deliverMessage(
                L1MessageType_L2FundedByL1,
                msg.sender,
                abi.encodePacked(
                    L2MessageType_unsignedEOATx,
                    maxGas,
                    gasPriceBid,
                    nonce,
                    uint256(uint160(bytes20(destAddr))),
                    msg.value,
                    data
                )
            );
    }

    function sendL1FundedContractTransaction(
        uint256 maxGas,
        uint256 gasPriceBid,
        address destAddr,
        bytes calldata data
    ) external payable virtual override onlyWhitelisted returns (uint256) {
        return
            _deliverMessage(
                L1MessageType_L2FundedByL1,
                msg.sender,
                abi.encodePacked(
                    L2MessageType_unsignedContractTx,
                    maxGas,
                    gasPriceBid,
                    uint256(uint160(bytes20(destAddr))),
                    msg.value,
                    data
                )
            );
    }

    function sendUnsignedTransaction(
        uint256 maxGas,
        uint256 gasPriceBid,
        uint256 nonce,
        address destAddr,
        uint256 amount,
        bytes calldata data
    ) external virtual override onlyWhitelisted returns (uint256) {
        return
            _deliverMessage(
                L2_MSG,
                msg.sender,
                abi.encodePacked(
                    L2MessageType_unsignedEOATx,
                    maxGas,
                    gasPriceBid,
                    nonce,
                    uint256(uint160(bytes20(destAddr))),
                    amount,
                    data
                )
            );
    }

    function sendContractTransaction(
        uint256 maxGas,
        uint256 gasPriceBid,
        address destAddr,
        uint256 amount,
        bytes calldata data
    ) external virtual override onlyWhitelisted returns (uint256) {
        return
            _deliverMessage(
                L2_MSG,
                msg.sender,
                abi.encodePacked(
                    L2MessageType_unsignedContractTx,
                    maxGas,
                    gasPriceBid,
                    uint256(uint160(bytes20(destAddr))),
                    amount,
                    data
                )
            );
    }

    modifier onlyOwner() {
        // the rollup contract owns the bridge
        address rollup = Bridge(address(bridge)).owner();
        // we want to validate the owner of the rollup
        address owner = RollupBase(rollup).owner();
        require(msg.sender == owner, "NOT_ROLLUP");
        _;
    }

    event PauseToggled(bool enabled);

    /// @notice pauses creating retryables
    function pauseCreateRetryables() external override onlyOwner {
        require(!isCreateRetryablePaused, "ALREADY_PAUSED");
        isCreateRetryablePaused = true;
        emit PauseToggled(true);
    }

    /// @notice unpauses creating retryables
    function unpauseCreateRetryables() external override onlyOwner {
        require(isCreateRetryablePaused, "NOT_PAUSED");
        isCreateRetryablePaused = false;
        emit PauseToggled(false);
    }

    event RewriteToggled(bool enabled);

    /// @notice start rewriting addresses in eth deposits
    function startRewriteAddress() external override onlyOwner {
        require(!shouldRewriteSender, "ALREADY_REWRITING");
        shouldRewriteSender = true;
        emit RewriteToggled(true);
    }

    /// @notice stop rewriting addresses in eth deposits
    function stopRewriteAddress() external override onlyOwner {
        require(shouldRewriteSender, "NOT_REWRITING");
        shouldRewriteSender = false;
        emit RewriteToggled(false);
    }

    /// @notice deposit eth from L1 to L2
    /// @dev this function should not be called inside contract constructors
    function depositEth(uint256 maxSubmissionCost)
        external
        payable
        virtual
        override
        onlyWhitelisted
        returns (uint256)
    {
        require(!isCreateRetryablePaused, "CREATE_RETRYABLES_PAUSED");
        address sender = msg.sender;
        address destinationAddress = msg.sender;

        if (shouldRewriteSender) {
            if (!Address.isContract(sender) && tx.origin == msg.sender) {
                // isContract check fails if this function is called during a contract's constructor.
                // We don't adjust the address for calls coming from L1 contracts since their addresses get remapped
                // If the caller is an EOA, we adjust the address.
                // This is needed because unsigned messages to the L2 (such as retryables)
                // have the L1 sender address mapped.
                // Here we preemptively reverse the mapping for EOAs so deposits work as expected
                sender = AddressAliasHelper.undoL1ToL2Alias(sender);
            } else {
                destinationAddress = AddressAliasHelper.applyL1ToL2Alias(destinationAddress);
            }
        }

        return
            _deliverMessage(
                L1MessageType_submitRetryableTx,
                sender,
                abi.encodePacked(
                    // the beneficiary and other refund addresses don't get rewritten by arb-os
                    // so we use the original msg.sender value
                    uint256(uint160(bytes20(destinationAddress))),
                    uint256(0),
                    msg.value,
                    maxSubmissionCost,
                    uint256(uint160(bytes20(destinationAddress))),
                    uint256(uint160(bytes20(destinationAddress))),
                    uint256(0),
                    uint256(0),
                    uint256(0),
                    ""
                )
            );
    }

    /**
     * @notice Put a message in the L2 inbox that can be reexecuted for some fixed amount of time if it reverts
     * @dev Advanced usage only (does not rewrite aliases for excessFeeRefundAddress and callValueRefundAddress). createRetryableTicket method is the recommended standard.
     * @param destAddr destination L2 contract address
     * @param l2CallValue call value for retryable L2 message
     * @param  maxSubmissionCost Max gas deducted from user's L2 balance to cover base submission fee
     * @param excessFeeRefundAddress maxgas x gasprice - execution cost gets credited here on L2 balance
     * @param callValueRefundAddress l2Callvalue gets credited here on L2 if retryable txn times out or gets cancelled
     * @param maxGas Max gas deducted from user's L2 balance to cover L2 execution
     * @param gasPriceBid price bid for L2 execution
     * @param data ABI encoded data of L2 message
     * @return unique id for retryable transaction (keccak256(requestID, uint(0) )
     */
    function createRetryableTicketNoRefundAliasRewrite(
        address destAddr,
        uint256 l2CallValue,
        uint256 maxSubmissionCost,
        address excessFeeRefundAddress,
        address callValueRefundAddress,
        uint256 maxGas,
        uint256 gasPriceBid,
        bytes calldata data
    ) public payable virtual onlyWhitelisted returns (uint256) {
        require(!isCreateRetryablePaused, "CREATE_RETRYABLES_PAUSED");

        return
            _deliverMessage(
                L1MessageType_submitRetryableTx,
                msg.sender,
                abi.encodePacked(
                    uint256(uint160(bytes20(destAddr))),
                    l2CallValue,
                    msg.value,
                    maxSubmissionCost,
                    uint256(uint160(bytes20(excessFeeRefundAddress))),
                    uint256(uint160(bytes20(callValueRefundAddress))),
                    maxGas,
                    gasPriceBid,
                    data.length,
                    data
                )
            );
    }

    /**
     * @notice Put a message in the L2 inbox that can be reexecuted for some fixed amount of time if it reverts
     * @dev all msg.value will deposited to callValueRefundAddress on L2
     * @param destAddr destination L2 contract address
     * @param l2CallValue call value for retryable L2 message
     * @param  maxSubmissionCost Max gas deducted from user's L2 balance to cover base submission fee
     * @param excessFeeRefundAddress maxgas x gasprice - execution cost gets credited here on L2 balance
     * @param callValueRefundAddress l2Callvalue gets credited here on L2 if retryable txn times out or gets cancelled
     * @param maxGas Max gas deducted from user's L2 balance to cover L2 execution
     * @param gasPriceBid price bid for L2 execution
     * @param data ABI encoded data of L2 message
     * @return unique id for retryable transaction (keccak256(requestID, uint(0) )
     */
    function createRetryableTicket(
        address destAddr,
        uint256 l2CallValue,
        uint256 maxSubmissionCost,
        address excessFeeRefundAddress,
        address callValueRefundAddress,
        uint256 maxGas,
        uint256 gasPriceBid,
        bytes calldata data
    ) external payable virtual override onlyWhitelisted returns (uint256) {
        // if a refund address is a contract, we apply the alias to it
        // so that it can access its funds on the L2
        // since the beneficiary and other refund addresses don't get rewritten by arb-os
        if (shouldRewriteSender && Address.isContract(excessFeeRefundAddress)) {
            excessFeeRefundAddress = AddressAliasHelper.applyL1ToL2Alias(excessFeeRefundAddress);
        }
        if (shouldRewriteSender && Address.isContract(callValueRefundAddress)) {
            // this is the beneficiary. be careful since this is the address that can cancel the retryable in the L2
            callValueRefundAddress = AddressAliasHelper.applyL1ToL2Alias(callValueRefundAddress);
        }

        return
            createRetryableTicketNoRefundAliasRewrite(
                destAddr,
                l2CallValue,
                maxSubmissionCost,
                excessFeeRefundAddress,
                callValueRefundAddress,
                maxGas,
                gasPriceBid,
                data
            );
    }

    function _deliverMessage(
        uint8 _kind,
        address _sender,
        bytes memory _messageData
    ) internal returns (uint256) {
        uint256 msgNum = deliverToBridge(_kind, _sender, keccak256(_messageData));
        emit InboxMessageDelivered(msgNum, _messageData);
        return msgNum;
    }

    function deliverToBridge(
        uint8 kind,
        address sender,
        bytes32 messageDataHash
    ) internal returns (uint256) {
        return bridge.deliverMessageToInbox{ value: msg.value }(kind, sender, messageDataHash);
    }
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

import "./IBridge.sol";
import "./IMessageProvider.sol";

interface IInbox is IMessageProvider {
    function sendL2Message(bytes calldata messageData) external returns (uint256);

    function sendUnsignedTransaction(
        uint256 maxGas,
        uint256 gasPriceBid,
        uint256 nonce,
        address destAddr,
        uint256 amount,
        bytes calldata data
    ) external returns (uint256);

    function sendContractTransaction(
        uint256 maxGas,
        uint256 gasPriceBid,
        address destAddr,
        uint256 amount,
        bytes calldata data
    ) external returns (uint256);

    function sendL1FundedUnsignedTransaction(
        uint256 maxGas,
        uint256 gasPriceBid,
        uint256 nonce,
        address destAddr,
        bytes calldata data
    ) external payable returns (uint256);

    function sendL1FundedContractTransaction(
        uint256 maxGas,
        uint256 gasPriceBid,
        address destAddr,
        bytes calldata data
    ) external payable returns (uint256);

    function createRetryableTicket(
        address destAddr,
        uint256 arbTxCallValue,
        uint256 maxSubmissionCost,
        address submissionRefundAddress,
        address valueRefundAddress,
        uint256 maxGas,
        uint256 gasPriceBid,
        bytes calldata data
    ) external payable returns (uint256);

    function depositEth(uint256 maxSubmissionCost) external payable returns (uint256);

    function bridge() external view returns (IBridge);

    function pauseCreateRetryables() external;

    function unpauseCreateRetryables() external;

    function startRewriteAddress() external;

    function stopRewriteAddress() external;
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

interface IBridge {
    event MessageDelivered(
        uint256 indexed messageIndex,
        bytes32 indexed beforeInboxAcc,
        address inbox,
        uint8 kind,
        address sender,
        bytes32 messageDataHash
    );

    event BridgeCallTriggered(
        address indexed outbox,
        address indexed destAddr,
        uint256 amount,
        bytes data
    );

    event InboxToggle(address indexed inbox, bool enabled);

    event OutboxToggle(address indexed outbox, bool enabled);

    function deliverMessageToInbox(
        uint8 kind,
        address sender,
        bytes32 messageDataHash
    ) external payable returns (uint256);

    function executeCall(
        address destAddr,
        uint256 amount,
        bytes calldata data
    ) external returns (bool success, bytes memory returnData);

    // These are only callable by the admin
    function setInbox(address inbox, bool enabled) external;

    function setOutbox(address inbox, bool enabled) external;

    // View functions

    function activeOutbox() external view returns (address);

    function allowedInboxes(address inbox) external view returns (bool);

    function allowedOutboxes(address outbox) external view returns (bool);

    function inboxAccs(uint256 index) external view returns (bytes32);

    function messageCount() external view returns (uint256);
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

import "@openzeppelin/contracts/utils/Pausable.sol";
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";

import "./RollupEventBridge.sol";
import "./RollupCore.sol";
import "./RollupLib.sol";
import "./INode.sol";
import "./INodeFactory.sol";

import "../challenge/IChallenge.sol";
import "../challenge/IChallengeFactory.sol";

import "../bridge/interfaces/IBridge.sol";
import "../bridge/interfaces/IOutbox.sol";
import "../bridge/Messages.sol";

import "../libraries/ProxyUtil.sol";
import "../libraries/Cloneable.sol";
import "./facets/IRollupFacets.sol";

abstract contract RollupBase is Cloneable, RollupCore, Pausable {
    // Rollup Config
    uint256 public confirmPeriodBlocks;
    uint256 public extraChallengeTimeBlocks;
    uint256 public avmGasSpeedLimitPerBlock;
    uint256 public baseStake;

    // Bridge is an IInbox and IOutbox
    IBridge public delayedBridge;
    ISequencerInbox public sequencerBridge;
    IOutbox public outbox;
    RollupEventBridge public rollupEventBridge;
    IChallengeFactory public challengeFactory;
    INodeFactory public nodeFactory;
    address public owner;
    address public stakeToken;
    uint256 public minimumAssertionPeriod;

    uint256 public STORAGE_GAP_1;
    uint256 public STORAGE_GAP_2;
    uint256 public challengeExecutionBisectionDegree;

    address[] internal facets;

    mapping(address => bool) isValidator;

    /// @notice DEPRECATED -- this method is deprecated but still mantained for backward compatibility
    /// @dev this actually returns the avmGasSpeedLimitPerBlock
    /// @return this actually returns the avmGasSpeedLimitPerBlock
    function arbGasSpeedLimitPerBlock() external view returns (uint256) {
        return avmGasSpeedLimitPerBlock;
    }
}

contract Rollup is Proxy, RollupBase {
    using Address for address;

    constructor(uint256 _confirmPeriodBlocks) public Cloneable() Pausable() {
        // constructor is used so logic contract can't be init'ed
        confirmPeriodBlocks = _confirmPeriodBlocks;
        require(isInit(), "CONSTRUCTOR_NOT_INIT");
    }

    function isInit() internal view returns (bool) {
        return confirmPeriodBlocks != 0;
    }

    // _rollupParams = [ confirmPeriodBlocks, extraChallengeTimeBlocks, avmGasSpeedLimitPerBlock, baseStake ]
    // connectedContracts = [delayedBridge, sequencerInbox, outbox, rollupEventBridge, challengeFactory, nodeFactory]
    function initialize(
        bytes32 _machineHash,
        uint256[4] calldata _rollupParams,
        address _stakeToken,
        address _owner,
        bytes calldata _extraConfig,
        address[6] calldata connectedContracts,
        address[2] calldata _facets,
        uint256[2] calldata sequencerInboxParams
    ) public {
        require(!isInit(), "ALREADY_INIT");

        // calls initialize method in user facet
        require(_facets[0].isContract(), "FACET_0_NOT_CONTRACT");
        require(_facets[1].isContract(), "FACET_1_NOT_CONTRACT");
        (bool success, ) = _facets[1].delegatecall(
            abi.encodeWithSelector(IRollupUser.initialize.selector, _stakeToken)
        );
        require(success, "FAIL_INIT_FACET");

        delayedBridge = IBridge(connectedContracts[0]);
        sequencerBridge = ISequencerInbox(connectedContracts[1]);
        outbox = IOutbox(connectedContracts[2]);
        delayedBridge.setOutbox(connectedContracts[2], true);
        rollupEventBridge = RollupEventBridge(connectedContracts[3]);
        delayedBridge.setInbox(connectedContracts[3], true);

        rollupEventBridge.rollupInitialized(
            _rollupParams[0],
            _rollupParams[2],
            _owner,
            _extraConfig
        );

        challengeFactory = IChallengeFactory(connectedContracts[4]);
        nodeFactory = INodeFactory(connectedContracts[5]);

        INode node = createInitialNode(_machineHash);
        initializeCore(node);

        confirmPeriodBlocks = _rollupParams[0];
        extraChallengeTimeBlocks = _rollupParams[1];
        avmGasSpeedLimitPerBlock = _rollupParams[2];
        baseStake = _rollupParams[3];
        owner = _owner;
        // A little over 15 minutes
        minimumAssertionPeriod = 75;
        challengeExecutionBisectionDegree = 400;

        sequencerBridge.setMaxDelay(sequencerInboxParams[0], sequencerInboxParams[1]);

        // facets[0] == admin, facets[1] == user
        facets = _facets;

        emit RollupCreated(_machineHash);
        require(isInit(), "INITIALIZE_NOT_INIT");
    }

    function postUpgradeInit() external {
        // it is assumed the rollup contract is behind a Proxy controlled by a proxy admin
        // this function can only be called by the proxy admin contract
        address proxyAdmin = ProxyUtil.getProxyAdmin();
        require(msg.sender == proxyAdmin, "NOT_FROM_ADMIN");

        // this upgrade moves the delay blocks and seconds tracking to the sequencer inbox
        // because of that we need to update the admin facet logic to allow the owner to set
        // these values in the sequencer inbox

        STORAGE_GAP_1 = 0;
        STORAGE_GAP_2 = 0;
    }

    function createInitialNode(bytes32 _machineHash) private returns (INode) {
        bytes32 state = RollupLib.stateHash(
            RollupLib.ExecutionState(
                0, // total gas used
                _machineHash,
                0, // inbox count
                0, // send count
                0, // log count
                0, // send acc
                0, // log acc
                block.number, // block proposed
                1 // Initialization message already in inbox
            )
        );
        return
            INode(
                nodeFactory.createNode(
                    state,
                    0, // challenge hash (not challengeable)
                    0, // confirm data
                    0, // prev node
                    block.number // deadline block (not challengeable)
                )
            );
    }

    /**
     * This contract uses a dispatch pattern from EIP-2535: Diamonds
     * together with Open Zeppelin's proxy
     */

    function getFacets() external view returns (address, address) {
        return (getAdminFacet(), getUserFacet());
    }

    function getAdminFacet() public view returns (address) {
        return facets[0];
    }

    function getUserFacet() public view returns (address) {
        return facets[1];
    }

    /**
     * @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
     * and {_fallback} should delegate.
     */
    function _implementation() internal view virtual override returns (address) {
        require(msg.data.length >= 4, "NO_FUNC_SIG");
        address rollupOwner = owner;
        // if there is an owner and it is the sender, delegate to admin facet
        address target = rollupOwner != address(0) && rollupOwner == msg.sender
            ? getAdminFacet()
            : getUserFacet();
        require(target.isContract(), "TARGET_NOT_CONTRACT");
        return target;
    }
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2019-2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

library Messages {
    function messageHash(
        uint8 kind,
        address sender,
        uint256 blockNumber,
        uint256 timestamp,
        uint256 inboxSeqNum,
        uint256 gasPriceL1,
        bytes32 messageDataHash
    ) internal pure returns (bytes32) {
        return
            keccak256(
                abi.encodePacked(
                    kind,
                    sender,
                    blockNumber,
                    timestamp,
                    inboxSeqNum,
                    gasPriceL1,
                    messageDataHash
                )
            );
    }

    function addMessageToInbox(bytes32 inbox, bytes32 message) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(inbox, message));
    }
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2019-2020, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

import "./ICloneable.sol";

contract Cloneable is ICloneable {
    string private constant NOT_CLONE = "NOT_CLONE";

    bool private isMasterCopy;

    constructor() public {
        isMasterCopy = true;
    }

    function isMaster() external view override returns (bool) {
        return isMasterCopy;
    }

    function safeSelfDestruct(address payable dest) internal {
        require(!isMasterCopy, NOT_CLONE);
        selfdestruct(dest);
    }
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

abstract contract WhitelistConsumer {
    address public whitelist;

    event WhitelistSourceUpdated(address newSource);

    modifier onlyWhitelisted {
        if (whitelist != address(0)) {
            require(Whitelist(whitelist).isAllowed(msg.sender), "NOT_WHITELISTED");
        }
        _;
    }

    function updateWhitelistSource(address newSource) external {
        require(msg.sender == whitelist, "NOT_FROM_LIST");
        whitelist = newSource;
        emit WhitelistSourceUpdated(newSource);
    }
}

contract Whitelist {
    address public owner;
    mapping(address => bool) public isAllowed;

    event OwnerUpdated(address newOwner);
    event WhitelistUpgraded(address newWhitelist, address[] targets);

    constructor() public {
        owner = msg.sender;
    }

    modifier onlyOwner {
        require(msg.sender == owner, "ONLY_OWNER");
        _;
    }

    function setOwner(address newOwner) external onlyOwner {
        owner = newOwner;
        emit OwnerUpdated(newOwner);
    }

    function setWhitelist(address[] memory user, bool[] memory val) external onlyOwner {
        require(user.length == val.length, "INVALID_INPUT");

        for (uint256 i = 0; i < user.length; i++) {
            isAllowed[user[i]] = val[i];
        }
    }

    // set new whitelist to address(0) to disable whitelist
    function triggerConsumers(address newWhitelist, address[] memory targets) external onlyOwner {
        for (uint256 i = 0; i < targets.length; i++) {
            WhitelistConsumer(targets[i]).updateWhitelistSource(newWhitelist);
        }
        emit WhitelistUpgraded(newWhitelist, targets);
    }
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

library ProxyUtil {
    function getProxyAdmin() internal view returns (address admin) {
        // https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v3.4.0/contracts/proxy/TransparentUpgradeableProxy.sol#L48
        // Storage slot with the admin of the proxy contract.
        // This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
        bytes32 slot = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
        assembly {
            admin := sload(slot)
        }
    }
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2019-2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

library AddressAliasHelper {
    uint160 constant offset = uint160(0x1111000000000000000000000000000000001111);

    /// @notice Utility function that converts the msg.sender viewed in the L2 to the
    /// address in the L1 that submitted a tx to the inbox
    /// @param l1Address L2 address as viewed in msg.sender
    /// @return l2Address the address in the L1 that triggered the tx to L2
    function applyL1ToL2Alias(address l1Address) internal pure returns (address l2Address) {
        l2Address = address(uint160(l1Address) + offset);
    }

    /// @notice Utility function that converts the msg.sender viewed in the L2 to the
    /// address in the L1 that submitted a tx to the inbox
    /// @param l2Address L2 address as viewed in msg.sender
    /// @return l1Address the address in the L1 that triggered the tx to L2
    function undoL1ToL2Alias(address l2Address) internal pure returns (address l1Address) {
        l1Address = address(uint160(l2Address) - offset);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

import "./Inbox.sol";
import "./Outbox.sol";
import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import "@openzeppelin/contracts/utils/Address.sol";

import "./interfaces/IBridge.sol";

contract Bridge is OwnableUpgradeable, IBridge {
    using Address for address;
    struct InOutInfo {
        uint256 index;
        bool allowed;
    }

    mapping(address => InOutInfo) private allowedInboxesMap;
    mapping(address => InOutInfo) private allowedOutboxesMap;

    address[] public allowedInboxList;
    address[] public allowedOutboxList;

    address public override activeOutbox;

    // Accumulator for delayed inbox; tail represents hash of the current state; each element represents the inclusion of a new message.
    bytes32[] public override inboxAccs;

    function initialize() external initializer {
        __Ownable_init();
    }

    function allowedInboxes(address inbox) external view override returns (bool) {
        return allowedInboxesMap[inbox].allowed;
    }

    function allowedOutboxes(address outbox) external view override returns (bool) {
        return allowedOutboxesMap[outbox].allowed;
    }

    function deliverMessageToInbox(
        uint8 kind,
        address sender,
        bytes32 messageDataHash
    ) external payable override returns (uint256) {
        require(allowedInboxesMap[msg.sender].allowed, "NOT_FROM_INBOX");
        uint256 count = inboxAccs.length;
        bytes32 messageHash =
            Messages.messageHash(
                kind,
                sender,
                block.number,
                block.timestamp, // solhint-disable-line not-rely-on-time
                count,
                tx.gasprice,
                messageDataHash
            );
        bytes32 prevAcc = 0;
        if (count > 0) {
            prevAcc = inboxAccs[count - 1];
        }
        inboxAccs.push(Messages.addMessageToInbox(prevAcc, messageHash));
        emit MessageDelivered(count, prevAcc, msg.sender, kind, sender, messageDataHash);
        return count;
    }

    function executeCall(
        address destAddr,
        uint256 amount,
        bytes calldata data
    ) external override returns (bool success, bytes memory returnData) {
        require(allowedOutboxesMap[msg.sender].allowed, "NOT_FROM_OUTBOX");
        if (data.length > 0) require(destAddr.isContract(), "NO_CODE_AT_DEST");
        address currentOutbox = activeOutbox;
        activeOutbox = msg.sender;
        // We set and reset active outbox around external call so activeOutbox remains valid during call
        (success, returnData) = destAddr.call{ value: amount }(data);
        activeOutbox = currentOutbox;
        emit BridgeCallTriggered(msg.sender, destAddr, amount, data);
    }

    function setInbox(address inbox, bool enabled) external override onlyOwner {
        InOutInfo storage info = allowedInboxesMap[inbox];
        bool alreadyEnabled = info.allowed;
        emit InboxToggle(inbox, enabled);
        if ((alreadyEnabled && enabled) || (!alreadyEnabled && !enabled)) {
            return;
        }
        if (enabled) {
            allowedInboxesMap[inbox] = InOutInfo(allowedInboxList.length, true);
            allowedInboxList.push(inbox);
        } else {
            allowedInboxList[info.index] = allowedInboxList[allowedInboxList.length - 1];
            allowedInboxesMap[allowedInboxList[info.index]].index = info.index;
            allowedInboxList.pop();
            delete allowedInboxesMap[inbox];
        }
    }

    function setOutbox(address outbox, bool enabled) external override onlyOwner {
        InOutInfo storage info = allowedOutboxesMap[outbox];
        bool alreadyEnabled = info.allowed;
        emit OutboxToggle(outbox, enabled);
        if ((alreadyEnabled && enabled) || (!alreadyEnabled && !enabled)) {
            return;
        }
        if (enabled) {
            allowedOutboxesMap[outbox] = InOutInfo(allowedOutboxList.length, true);
            allowedOutboxList.push(outbox);
        } else {
            allowedOutboxList[info.index] = allowedOutboxList[allowedOutboxList.length - 1];
            allowedOutboxesMap[allowedOutboxList[info.index]].index = info.index;
            allowedOutboxList.pop();
            delete allowedOutboxesMap[outbox];
        }
    }

    function messageCount() external view override returns (uint256) {
        return inboxAccs.length;
    }
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

interface IMessageProvider {
    event InboxMessageDelivered(uint256 indexed messageNum, bytes data);

    event InboxMessageDeliveredFromOrigin(uint256 indexed messageNum);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "./Context.sol";

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor () internal {
        _paused = false;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        require(!paused(), "Pausable: paused");
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        require(paused(), "Pausable: not paused");
        _;
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 *
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 *
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     *
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal virtual {
        // solhint-disable-next-line no-inline-assembly
        assembly {
            // Copy msg.data. We take full control of memory in this inline assembly
            // block because it will not return to Solidity code. We overwrite the
            // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())

            // Call the implementation.
            // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)

            // Copy the returned data.
            returndatacopy(0, 0, returndatasize())

            switch result
            // delegatecall returns 0 on error.
            case 0 { revert(0, returndatasize()) }
            default { return(0, returndatasize()) }
        }
    }

    /**
     * @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
     * and {_fallback} should delegate.
     */
    function _implementation() internal view virtual returns (address);

    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     *
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _fallback() internal virtual {
        _beforeFallback();
        _delegate(_implementation());
    }

    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback () external payable virtual {
        _fallback();
    }

    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
     * is empty.
     */
    receive () external payable virtual {
        _fallback();
    }

    /**
     * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
     * call, or as part of the Solidity `fallback` or `receive` functions.
     *
     * If overriden should call `super._beforeFallback()`.
     */
    function _beforeFallback() internal virtual {
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

import "./Rollup.sol";
import "./facets/IRollupFacets.sol";

import "../bridge/interfaces/IBridge.sol";
import "../bridge/interfaces/IMessageProvider.sol";
import "./INode.sol";
import "../libraries/Cloneable.sol";

contract RollupEventBridge is IMessageProvider, Cloneable {
    uint8 internal constant INITIALIZATION_MSG_TYPE = 11;
    uint8 internal constant ROLLUP_PROTOCOL_EVENT_TYPE = 8;

    uint8 internal constant CREATE_NODE_EVENT = 0;
    uint8 internal constant CONFIRM_NODE_EVENT = 1;
    uint8 internal constant REJECT_NODE_EVENT = 2;
    uint8 internal constant STAKE_CREATED_EVENT = 3;

    IBridge bridge;
    address rollup;

    modifier onlyRollup() {
        require(msg.sender == rollup, "ONLY_ROLLUP");
        _;
    }

    function initialize(address _bridge, address _rollup) external {
        require(rollup == address(0), "ALREADY_INIT");
        bridge = IBridge(_bridge);
        rollup = _rollup;
    }

    function rollupInitialized(
        uint256 confirmPeriodBlocks,
        uint256 avmGasSpeedLimitPerBlock,
        address owner,
        bytes calldata extraConfig
    ) external onlyRollup {
        bytes memory initMsg = abi.encodePacked(
            keccak256("ChallengePeriodEthBlocks"),
            confirmPeriodBlocks,
            keccak256("SpeedLimitPerSecond"),
            avmGasSpeedLimitPerBlock / 100, // convert avm gas to arbgas
            keccak256("ChainOwner"),
            uint256(uint160(bytes20(owner))),
            extraConfig
        );
        uint256 num = bridge.deliverMessageToInbox(
            INITIALIZATION_MSG_TYPE,
            address(0),
            keccak256(initMsg)
        );
        emit InboxMessageDelivered(num, initMsg);
    }

    function nodeCreated(
        uint256 nodeNum,
        uint256 prev,
        uint256 deadline,
        address asserter
    ) external onlyRollup {
        deliverToBridge(
            abi.encodePacked(
                CREATE_NODE_EVENT,
                nodeNum,
                prev,
                block.number,
                deadline,
                uint256(uint160(bytes20(asserter)))
            )
        );
    }

    function nodeConfirmed(uint256 nodeNum) external onlyRollup {
        deliverToBridge(abi.encodePacked(CONFIRM_NODE_EVENT, nodeNum));
    }

    function nodeRejected(uint256 nodeNum) external onlyRollup {
        deliverToBridge(abi.encodePacked(REJECT_NODE_EVENT, nodeNum));
    }

    function stakeCreated(address staker, uint256 nodeNum) external onlyRollup {
        deliverToBridge(
            abi.encodePacked(
                STAKE_CREATED_EVENT,
                uint256(uint160(bytes20(staker))),
                nodeNum,
                block.number
            )
        );
    }

    function deliverToBridge(bytes memory message) private {
        emit InboxMessageDelivered(
            bridge.deliverMessageToInbox(
                ROLLUP_PROTOCOL_EVENT_TYPE,
                msg.sender,
                keccak256(message)
            ),
            message
        );
    }
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

import "./INode.sol";
import "./IRollupCore.sol";
import "./RollupLib.sol";
import "./INodeFactory.sol";
import "./RollupEventBridge.sol";
import "../bridge/interfaces/ISequencerInbox.sol";

import "@openzeppelin/contracts/math/SafeMath.sol";

contract RollupCore is IRollupCore {
    using SafeMath for uint256;

    // Stakers become Zombies after losing a challenge
    struct Zombie {
        address stakerAddress;
        uint256 latestStakedNode;
    }

    struct Staker {
        uint256 index;
        uint256 latestStakedNode;
        uint256 amountStaked;
        // currentChallenge is 0 if staker is not in a challenge
        address currentChallenge;
        bool isStaked;
    }

    uint256 private _latestConfirmed;
    uint256 private _firstUnresolvedNode;
    uint256 private _latestNodeCreated;
    uint256 private _lastStakeBlock;
    mapping(uint256 => INode) private _nodes;
    mapping(uint256 => bytes32) private _nodeHashes;

    address payable[] private _stakerList;
    mapping(address => Staker) public override _stakerMap;

    Zombie[] private _zombies;

    mapping(address => uint256) private _withdrawableFunds;

    /**
     * @notice Get the address of the Node contract for the given node
     * @param nodeNum Index of the node
     * @return Address of the Node contract
     */
    function getNode(uint256 nodeNum) public view override returns (INode) {
        return _nodes[nodeNum];
    }

    /**
     * @notice Get the address of the staker at the given index
     * @param stakerNum Index of the staker
     * @return Address of the staker
     */
    function getStakerAddress(uint256 stakerNum) external view override returns (address) {
        return _stakerList[stakerNum];
    }

    /**
     * @notice Check whether the given staker is staked
     * @param staker Staker address to check
     * @return True or False for whether the staker was staked
     */
    function isStaked(address staker) public view override returns (bool) {
        return _stakerMap[staker].isStaked;
    }

    /**
     * @notice Get the latest staked node of the given staker
     * @param staker Staker address to lookup
     * @return Latest node staked of the staker
     */
    function latestStakedNode(address staker) public view override returns (uint256) {
        return _stakerMap[staker].latestStakedNode;
    }

    /**
     * @notice Get the current challenge of the given staker
     * @param staker Staker address to lookup
     * @return Current challenge of the staker
     */
    function currentChallenge(address staker) public view override returns (address) {
        return _stakerMap[staker].currentChallenge;
    }

    /**
     * @notice Get the amount staked of the given staker
     * @param staker Staker address to lookup
     * @return Amount staked of the staker
     */
    function amountStaked(address staker) public view override returns (uint256) {
        return _stakerMap[staker].amountStaked;
    }

    /**
     * @notice Get the original staker address of the zombie at the given index
     * @param zombieNum Index of the zombie to lookup
     * @return Original staker address of the zombie
     */
    function zombieAddress(uint256 zombieNum) public view override returns (address) {
        return _zombies[zombieNum].stakerAddress;
    }

    /**
     * @notice Get Latest node that the given zombie at the given index is staked on
     * @param zombieNum Index of the zombie to lookup
     * @return Latest node that the given zombie is staked on
     */
    function zombieLatestStakedNode(uint256 zombieNum) public view override returns (uint256) {
        return _zombies[zombieNum].latestStakedNode;
    }

    /// @return Current number of un-removed zombies
    function zombieCount() public view override returns (uint256) {
        return _zombies.length;
    }

    function isZombie(address staker) public view override returns (bool) {
        for (uint256 i = 0; i < _zombies.length; i++) {
            if (staker == _zombies[i].stakerAddress) {
                return true;
            }
        }
        return false;
    }

    /**
     * @notice Get the amount of funds withdrawable by the given address
     * @param owner Address to check the funds of
     * @return Amount of funds withdrawable by owner
     */
    function withdrawableFunds(address owner) external view override returns (uint256) {
        return _withdrawableFunds[owner];
    }

    /**
     * @return Index of the first unresolved node
     * @dev If all nodes have been resolved, this will be latestNodeCreated + 1
     */
    function firstUnresolvedNode() public view override returns (uint256) {
        return _firstUnresolvedNode;
    }

    /// @return Index of the latest confirmed node
    function latestConfirmed() public view override returns (uint256) {
        return _latestConfirmed;
    }

    /// @return Index of the latest rollup node created
    function latestNodeCreated() public view override returns (uint256) {
        return _latestNodeCreated;
    }

    /// @return Ethereum block that the most recent stake was created
    function lastStakeBlock() external view override returns (uint256) {
        return _lastStakeBlock;
    }

    /// @return Number of active stakers currently staked
    function stakerCount() public view override returns (uint256) {
        return _stakerList.length;
    }

    /**
     * @notice Initialize the core with an initial node
     * @param initialNode Initial node to start the chain with
     */
    function initializeCore(INode initialNode) internal {
        _nodes[0] = initialNode;
        _firstUnresolvedNode = 1;
    }

    /**
     * @notice React to a new node being created by storing it an incrementing the latest node counter
     * @param node Node that was newly created
     * @param nodeHash The hash of said node
     */
    function nodeCreated(INode node, bytes32 nodeHash) internal {
        _latestNodeCreated++;
        _nodes[_latestNodeCreated] = node;
        _nodeHashes[_latestNodeCreated] = nodeHash;
    }

    /// @return Node hash as of this node number
    function getNodeHash(uint256 index) public view override returns (bytes32) {
        return _nodeHashes[index];
    }

    /// @notice Reject the next unresolved node
    function _rejectNextNode() internal {
        destroyNode(_firstUnresolvedNode);
        _firstUnresolvedNode++;
    }

    /// @notice Confirm the next unresolved node
    function confirmNextNode(
        bytes32 beforeSendAcc,
        bytes calldata sendsData,
        uint256[] calldata sendLengths,
        uint256 afterSendCount,
        bytes32 afterLogAcc,
        uint256 afterLogCount,
        IOutbox outbox,
        RollupEventBridge rollupEventBridge
    ) internal {
        confirmNode(
            _firstUnresolvedNode,
            beforeSendAcc,
            sendsData,
            sendLengths,
            afterSendCount,
            afterLogAcc,
            afterLogCount,
            outbox,
            rollupEventBridge
        );
    }

    function confirmNode(
        uint256 nodeNum,
        bytes32 beforeSendAcc,
        bytes calldata sendsData,
        uint256[] calldata sendLengths,
        uint256 afterSendCount,
        bytes32 afterLogAcc,
        uint256 afterLogCount,
        IOutbox outbox,
        RollupEventBridge rollupEventBridge
    ) internal {
        bytes32 afterSendAcc = RollupLib.feedAccumulator(sendsData, sendLengths, beforeSendAcc);

        INode node = getNode(nodeNum);
        // Authenticate data against node's confirm data pre-image
        require(
            node.confirmData() ==
                RollupLib.confirmHash(
                    beforeSendAcc,
                    afterSendAcc,
                    afterLogAcc,
                    afterSendCount,
                    afterLogCount
                ),
            "CONFIRM_DATA"
        );

        // trusted external call to outbox
        outbox.processOutgoingMessages(sendsData, sendLengths);

        destroyNode(_latestConfirmed);
        _latestConfirmed = nodeNum;
        _firstUnresolvedNode = nodeNum + 1;

        rollupEventBridge.nodeConfirmed(nodeNum);
        emit NodeConfirmed(nodeNum, afterSendAcc, afterSendCount, afterLogAcc, afterLogCount);
    }

    /**
     * @notice Create a new stake at latest confirmed node
     * @param stakerAddress Address of the new staker
     * @param depositAmount Stake amount of the new staker
     */
    function createNewStake(address payable stakerAddress, uint256 depositAmount) internal {
        uint256 stakerIndex = _stakerList.length;
        _stakerList.push(stakerAddress);
        _stakerMap[stakerAddress] = Staker(
            stakerIndex,
            _latestConfirmed,
            depositAmount,
            address(0), // new staker is not in challenge
            true
        );
        _lastStakeBlock = block.number;
        emit UserStakeUpdated(stakerAddress, 0, depositAmount);
    }

    /**
     * @notice Check to see whether the two stakers are in the same challenge
     * @param stakerAddress1 Address of the first staker
     * @param stakerAddress2 Address of the second staker
     * @return Address of the challenge that the two stakers are in
     */
    function inChallenge(address stakerAddress1, address stakerAddress2)
        internal
        view
        returns (address)
    {
        Staker storage staker1 = _stakerMap[stakerAddress1];
        Staker storage staker2 = _stakerMap[stakerAddress2];
        address challenge = staker1.currentChallenge;
        require(challenge != address(0), "NO_CHAL");
        require(challenge == staker2.currentChallenge, "DIFF_IN_CHAL");
        return challenge;
    }

    /**
     * @notice Make the given staker as not being in a challenge
     * @param stakerAddress Address of the staker to remove from a challenge
     */
    function clearChallenge(address stakerAddress) internal {
        Staker storage staker = _stakerMap[stakerAddress];
        staker.currentChallenge = address(0);
    }

    /**
     * @notice Mark both the given stakers as engaged in the challenge
     * @param staker1 Address of the first staker
     * @param staker2 Address of the second staker
     * @param challenge Address of the challenge both stakers are now in
     */
    function challengeStarted(
        address staker1,
        address staker2,
        address challenge
    ) internal {
        _stakerMap[staker1].currentChallenge = challenge;
        _stakerMap[staker2].currentChallenge = challenge;
    }

    /**
     * @notice Add to the stake of the given staker by the given amount
     * @param stakerAddress Address of the staker to increase the stake of
     * @param amountAdded Amount of stake to add to the staker
     */
    function increaseStakeBy(address stakerAddress, uint256 amountAdded) internal {
        Staker storage staker = _stakerMap[stakerAddress];
        uint256 initialStaked = staker.amountStaked;
        uint256 finalStaked = initialStaked.add(amountAdded);
        staker.amountStaked = finalStaked;
        emit UserStakeUpdated(stakerAddress, initialStaked, finalStaked);
    }

    /**
     * @notice Reduce the stake of the given staker to the given target
     * @param stakerAddress Address of the staker to reduce the stake of
     * @param target Amount of stake to leave with the staker
     * @return Amount of value released from the stake
     */
    function reduceStakeTo(address stakerAddress, uint256 target) internal returns (uint256) {
        Staker storage staker = _stakerMap[stakerAddress];
        uint256 current = staker.amountStaked;
        require(target <= current, "TOO_LITTLE_STAKE");
        uint256 amountWithdrawn = current.sub(target);
        staker.amountStaked = target;
        increaseWithdrawableFunds(stakerAddress, amountWithdrawn);
        emit UserStakeUpdated(stakerAddress, current, target);
        return amountWithdrawn;
    }

    /**
     * @notice Remove the given staker and turn them into a zombie
     * @param stakerAddress Address of the staker to remove
     */
    function turnIntoZombie(address stakerAddress) internal {
        Staker storage staker = _stakerMap[stakerAddress];
        _zombies.push(Zombie(stakerAddress, staker.latestStakedNode));
        deleteStaker(stakerAddress);
    }

    /**
     * @notice Update the latest staked node of the zombie at the given index
     * @param zombieNum Index of the zombie to move
     * @param latest New latest node the zombie is staked on
     */
    function zombieUpdateLatestStakedNode(uint256 zombieNum, uint256 latest) internal {
        _zombies[zombieNum].latestStakedNode = latest;
    }

    /**
     * @notice Remove the zombie at the given index
     * @param zombieNum Index of the zombie to remove
     */
    function removeZombie(uint256 zombieNum) internal {
        _zombies[zombieNum] = _zombies[_zombies.length - 1];
        _zombies.pop();
    }

    /**
     * @notice Remove the given staker and return their stake
     * @param stakerAddress Address of the staker withdrawing their stake
     */
    function withdrawStaker(address stakerAddress) internal {
        Staker storage staker = _stakerMap[stakerAddress];
        uint256 initialStaked = staker.amountStaked;
        increaseWithdrawableFunds(stakerAddress, initialStaked);
        deleteStaker(stakerAddress);
        emit UserStakeUpdated(stakerAddress, initialStaked, 0);
    }

    /**
     * @notice Advance the given staker to the given node
     * @param stakerAddress Address of the staker adding their stake
     * @param nodeNum Index of the node to stake on
     */
    function stakeOnNode(
        address stakerAddress,
        uint256 nodeNum,
        uint256 confirmPeriodBlocks
    ) internal {
        Staker storage staker = _stakerMap[stakerAddress];
        INode node = _nodes[nodeNum];
        uint256 newStakerCount = node.addStaker(stakerAddress);
        staker.latestStakedNode = nodeNum;
        if (newStakerCount == 1) {
            INode parent = _nodes[node.prev()];
            parent.newChildConfirmDeadline(block.number.add(confirmPeriodBlocks));
        }
    }

    /**
     * @notice Clear the withdrawable funds for the given address
     * @param owner Address of the account to remove funds from
     * @return Amount of funds removed from account
     */
    function withdrawFunds(address owner) internal returns (uint256) {
        uint256 amount = _withdrawableFunds[owner];
        _withdrawableFunds[owner] = 0;
        emit UserWithdrawableFundsUpdated(owner, amount, 0);
        return amount;
    }

    /**
     * @notice Increase the withdrawable funds for the given address
     * @param owner Address of the account to add withdrawable funds to
     */
    function increaseWithdrawableFunds(address owner, uint256 amount) internal {
        uint256 initialWithdrawable = _withdrawableFunds[owner];
        uint256 finalWithdrawable = initialWithdrawable.add(amount);
        _withdrawableFunds[owner] = finalWithdrawable;
        emit UserWithdrawableFundsUpdated(owner, initialWithdrawable, finalWithdrawable);
    }

    /**
     * @notice Remove the given staker
     * @param stakerAddress Address of the staker to remove
     */
    function deleteStaker(address stakerAddress) private {
        Staker storage staker = _stakerMap[stakerAddress];
        uint256 stakerIndex = staker.index;
        _stakerList[stakerIndex] = _stakerList[_stakerList.length - 1];
        _stakerMap[_stakerList[stakerIndex]].index = stakerIndex;
        _stakerList.pop();
        delete _stakerMap[stakerAddress];
    }

    /**
     * @notice Destroy the given node and clear out its address
     * @param nodeNum Index of the node to remove
     */
    function destroyNode(uint256 nodeNum) internal {
        _nodes[nodeNum].destroy();
        _nodes[nodeNum] = INode(0);
    }

    function nodeDeadline(
        uint256 avmGasSpeedLimitPerBlock,
        uint256 gasUsed,
        uint256 confirmPeriodBlocks,
        INode prevNode
    ) internal view returns (uint256 deadlineBlock) {
        // Set deadline rounding up to the nearest block
        uint256 checkTime =
            gasUsed.add(avmGasSpeedLimitPerBlock.sub(1)).div(avmGasSpeedLimitPerBlock);

        deadlineBlock = max(block.number.add(confirmPeriodBlocks), prevNode.deadlineBlock()).add(
            checkTime
        );

        uint256 olderSibling = prevNode.latestChildNumber();
        if (olderSibling != 0) {
            deadlineBlock = max(deadlineBlock, getNode(olderSibling).deadlineBlock());
        }
        return deadlineBlock;
    }

    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    struct StakeOnNewNodeFrame {
        uint256 currentInboxSize;
        INode node;
        bytes32 executionHash;
        INode prevNode;
        bytes32 lastHash;
        bool hasSibling;
        uint256 deadlineBlock;
        uint256 gasUsed;
        uint256 sequencerBatchEnd;
        bytes32 sequencerBatchAcc;
    }

    struct CreateNodeDataFrame {
        uint256 prevNode;
        uint256 confirmPeriodBlocks;
        uint256 avmGasSpeedLimitPerBlock;
        ISequencerInbox sequencerInbox;
        RollupEventBridge rollupEventBridge;
        INodeFactory nodeFactory;
    }

    uint8 internal constant MAX_SEND_COUNT = 100;

    function createNewNode(
        RollupLib.Assertion memory assertion,
        bytes32[3][2] calldata assertionBytes32Fields,
        uint256[4][2] calldata assertionIntFields,
        bytes calldata sequencerBatchProof,
        CreateNodeDataFrame memory inputDataFrame,
        bytes32 expectedNodeHash
    ) internal returns (bytes32 newNodeHash) {
        StakeOnNewNodeFrame memory memoryFrame;
        {
            // validate data
            memoryFrame.gasUsed = RollupLib.assertionGasUsed(assertion);
            memoryFrame.prevNode = getNode(inputDataFrame.prevNode);
            memoryFrame.currentInboxSize = inputDataFrame.sequencerInbox.messageCount();

            // Make sure the previous state is correct against the node being built on
            require(
                RollupLib.stateHash(assertion.beforeState) == memoryFrame.prevNode.stateHash(),
                "PREV_STATE_HASH"
            );

            // Ensure that the assertion doesn't read past the end of the current inbox
            require(
                assertion.afterState.inboxCount <= memoryFrame.currentInboxSize,
                "INBOX_PAST_END"
            );
            // Insure inbox tip after assertion is included in a sequencer-inbox batch and return inbox acc; this gives replay protection against the state of the inbox
            (memoryFrame.sequencerBatchEnd, memoryFrame.sequencerBatchAcc) = inputDataFrame
                .sequencerInbox
                .proveInboxContainsMessage(sequencerBatchProof, assertion.afterState.inboxCount);
        }

        {
            memoryFrame.executionHash = RollupLib.executionHash(assertion);

            memoryFrame.deadlineBlock = nodeDeadline(
                inputDataFrame.avmGasSpeedLimitPerBlock,
                memoryFrame.gasUsed,
                inputDataFrame.confirmPeriodBlocks,
                memoryFrame.prevNode
            );

            memoryFrame.hasSibling = memoryFrame.prevNode.latestChildNumber() > 0;
            // here we don't use ternacy operator to remain compatible with slither
            if (memoryFrame.hasSibling) {
                memoryFrame.lastHash = getNodeHash(memoryFrame.prevNode.latestChildNumber());
            } else {
                memoryFrame.lastHash = getNodeHash(inputDataFrame.prevNode);
            }

            memoryFrame.node = INode(
                inputDataFrame.nodeFactory.createNode(
                    RollupLib.stateHash(assertion.afterState),
                    RollupLib.challengeRoot(assertion, memoryFrame.executionHash, block.number),
                    RollupLib.confirmHash(assertion),
                    inputDataFrame.prevNode,
                    memoryFrame.deadlineBlock
                )
            );
        }

        {
            uint256 nodeNum = latestNodeCreated() + 1;
            memoryFrame.prevNode.childCreated(nodeNum);

            newNodeHash = RollupLib.nodeHash(
                memoryFrame.hasSibling,
                memoryFrame.lastHash,
                memoryFrame.executionHash,
                memoryFrame.sequencerBatchAcc
            );
            require(newNodeHash == expectedNodeHash, "UNEXPECTED_NODE_HASH");

            nodeCreated(memoryFrame.node, newNodeHash);
            inputDataFrame.rollupEventBridge.nodeCreated(
                nodeNum,
                inputDataFrame.prevNode,
                memoryFrame.deadlineBlock,
                msg.sender
            );
        }

        emit NodeCreated(
            latestNodeCreated(),
            getNodeHash(inputDataFrame.prevNode),
            newNodeHash,
            memoryFrame.executionHash,
            memoryFrame.currentInboxSize,
            memoryFrame.sequencerBatchEnd,
            memoryFrame.sequencerBatchAcc,
            assertionBytes32Fields,
            assertionIntFields
        );

        return newNodeHash;
    }
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

import "../challenge/ChallengeLib.sol";
import "./INode.sol";

import "@openzeppelin/contracts/math/SafeMath.sol";

library RollupLib {
    using SafeMath for uint256;

    struct Config {
        bytes32 machineHash;
        uint256 confirmPeriodBlocks;
        uint256 extraChallengeTimeBlocks;
        uint256 avmGasSpeedLimitPerBlock;
        uint256 baseStake;
        address stakeToken;
        address owner;
        address sequencer;
        uint256 sequencerDelayBlocks;
        uint256 sequencerDelaySeconds;
        bytes extraConfig;
    }

    struct ExecutionState {
        uint256 gasUsed;
        bytes32 machineHash;
        uint256 inboxCount;
        uint256 sendCount;
        uint256 logCount;
        bytes32 sendAcc;
        bytes32 logAcc;
        uint256 proposedBlock;
        uint256 inboxMaxCount;
    }

    function stateHash(ExecutionState memory execState) internal pure returns (bytes32) {
        return
            keccak256(
                abi.encodePacked(
                    execState.gasUsed,
                    execState.machineHash,
                    execState.inboxCount,
                    execState.sendCount,
                    execState.logCount,
                    execState.sendAcc,
                    execState.logAcc,
                    execState.proposedBlock,
                    execState.inboxMaxCount
                )
            );
    }

    struct Assertion {
        ExecutionState beforeState;
        ExecutionState afterState;
    }

    function decodeExecutionState(
        bytes32[3] memory bytes32Fields,
        uint256[4] memory intFields,
        uint256 proposedBlock,
        uint256 inboxMaxCount
    ) internal pure returns (ExecutionState memory) {
        return
            ExecutionState(
                intFields[0],
                bytes32Fields[0],
                intFields[1],
                intFields[2],
                intFields[3],
                bytes32Fields[1],
                bytes32Fields[2],
                proposedBlock,
                inboxMaxCount
            );
    }

    function decodeAssertion(
        bytes32[3][2] memory bytes32Fields,
        uint256[4][2] memory intFields,
        uint256 beforeProposedBlock,
        uint256 beforeInboxMaxCount,
        uint256 inboxMaxCount
    ) internal view returns (Assertion memory) {
        return
            Assertion(
                decodeExecutionState(
                    bytes32Fields[0],
                    intFields[0],
                    beforeProposedBlock,
                    beforeInboxMaxCount
                ),
                decodeExecutionState(bytes32Fields[1], intFields[1], block.number, inboxMaxCount)
            );
    }

    function executionStateChallengeHash(ExecutionState memory state)
        internal
        pure
        returns (bytes32)
    {
        return
            ChallengeLib.assertionHash(
                state.gasUsed,
                ChallengeLib.assertionRestHash(
                    state.inboxCount,
                    state.machineHash,
                    state.sendAcc,
                    state.sendCount,
                    state.logAcc,
                    state.logCount
                )
            );
    }

    function executionHash(Assertion memory assertion) internal pure returns (bytes32) {
        return
            ChallengeLib.bisectionChunkHash(
                assertion.beforeState.gasUsed,
                assertion.afterState.gasUsed - assertion.beforeState.gasUsed,
                RollupLib.executionStateChallengeHash(assertion.beforeState),
                RollupLib.executionStateChallengeHash(assertion.afterState)
            );
    }

    function assertionGasUsed(RollupLib.Assertion memory assertion)
        internal
        pure
        returns (uint256)
    {
        return assertion.afterState.gasUsed.sub(assertion.beforeState.gasUsed);
    }

    function challengeRoot(
        Assertion memory assertion,
        bytes32 assertionExecHash,
        uint256 blockProposed
    ) internal pure returns (bytes32) {
        return challengeRootHash(assertionExecHash, blockProposed, assertion.afterState.inboxCount);
    }

    function challengeRootHash(
        bytes32 execution,
        uint256 proposedTime,
        uint256 maxMessageCount
    ) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(execution, proposedTime, maxMessageCount));
    }

    function confirmHash(Assertion memory assertion) internal pure returns (bytes32) {
        return
            confirmHash(
                assertion.beforeState.sendAcc,
                assertion.afterState.sendAcc,
                assertion.afterState.logAcc,
                assertion.afterState.sendCount,
                assertion.afterState.logCount
            );
    }

    function confirmHash(
        bytes32 beforeSendAcc,
        bytes32 afterSendAcc,
        bytes32 afterLogAcc,
        uint256 afterSendCount,
        uint256 afterLogCount
    ) internal pure returns (bytes32) {
        return
            keccak256(
                abi.encodePacked(
                    beforeSendAcc,
                    afterSendAcc,
                    afterSendCount,
                    afterLogAcc,
                    afterLogCount
                )
            );
    }

    function feedAccumulator(
        bytes memory messageData,
        uint256[] memory messageLengths,
        bytes32 beforeAcc
    ) internal pure returns (bytes32) {
        uint256 offset = 0;
        uint256 messageCount = messageLengths.length;
        uint256 dataLength = messageData.length;
        bytes32 messageAcc = beforeAcc;
        for (uint256 i = 0; i < messageCount; i++) {
            uint256 messageLength = messageLengths[i];
            require(offset + messageLength <= dataLength, "DATA_OVERRUN");
            bytes32 messageHash;
            assembly {
                messageHash := keccak256(add(messageData, add(offset, 32)), messageLength)
            }
            messageAcc = keccak256(abi.encodePacked(messageAcc, messageHash));
            offset += messageLength;
        }
        require(offset == dataLength, "DATA_LENGTH");
        return messageAcc;
    }

    function nodeHash(
        bool hasSibling,
        bytes32 lastHash,
        bytes32 assertionExecHash,
        bytes32 inboxAcc
    ) internal pure returns (bytes32) {
        uint8 hasSiblingInt = hasSibling ? 1 : 0;
        return keccak256(abi.encodePacked(hasSiblingInt, lastHash, assertionExecHash, inboxAcc));
    }
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

interface INode {
    function initialize(
        address _rollup,
        bytes32 _stateHash,
        bytes32 _challengeHash,
        bytes32 _confirmData,
        uint256 _prev,
        uint256 _deadlineBlock
    ) external;

    function destroy() external;

    function addStaker(address staker) external returns (uint256);

    function removeStaker(address staker) external;

    function childCreated(uint256) external;

    function newChildConfirmDeadline(uint256 deadline) external;

    function stateHash() external view returns (bytes32);

    function challengeHash() external view returns (bytes32);

    function confirmData() external view returns (bytes32);

    function prev() external view returns (uint256);

    function deadlineBlock() external view returns (uint256);

    function noChildConfirmedBeforeBlock() external view returns (uint256);

    function stakerCount() external view returns (uint256);

    function stakers(address staker) external view returns (bool);

    function firstChildBlock() external view returns (uint256);

    function latestChildNumber() external view returns (uint256);

    function requirePastDeadline() external view;

    function requirePastChildConfirmDeadline() external view;
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

interface INodeFactory {
    function createNode(
        bytes32 _stateHash,
        bytes32 _challengeHash,
        bytes32 _confirmData,
        uint256 _prev,
        uint256 _deadlineBlock
    ) external returns (address);
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

import "../bridge/interfaces/IBridge.sol";
import "../bridge/interfaces/ISequencerInbox.sol";
import "../arch/IOneStepProof.sol";

interface IChallenge {
    function initializeChallenge(
        IOneStepProof[] calldata _executors,
        address _resultReceiver,
        bytes32 _executionHash,
        uint256 _maxMessageCount,
        address _asserter,
        address _challenger,
        uint256 _asserterTimeLeft,
        uint256 _challengerTimeLeft,
        ISequencerInbox _sequencerBridge,
        IBridge _delayedBridge
    ) external;

    function currentResponderTimeLeft() external view returns (uint256);

    function lastMoveBlock() external view returns (uint256);

    function timeout() external;

    function asserter() external view returns (address);

    function challenger() external view returns (address);

    function clearChallenge() external;
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2019-2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

import "../bridge/interfaces/IBridge.sol";
import "../bridge/interfaces/ISequencerInbox.sol";

interface IChallengeFactory {
    function createChallenge(
        address _resultReceiver,
        bytes32 _executionHash,
        uint256 _maxMessageCount,
        address _asserter,
        address _challenger,
        uint256 _asserterTimeLeft,
        uint256 _challengerTimeLeft,
        ISequencerInbox _sequencerBridge,
        IBridge _delayedBridge
    ) external returns (address);
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

interface IOutbox {
    event OutboxEntryCreated(
        uint256 indexed batchNum,
        uint256 outboxEntryIndex,
        bytes32 outputRoot,
        uint256 numInBatch
    );
    event OutBoxTransactionExecuted(
        address indexed destAddr,
        address indexed l2Sender,
        uint256 indexed outboxEntryIndex,
        uint256 transactionIndex
    );

    function l2ToL1Sender() external view returns (address);

    function l2ToL1Block() external view returns (uint256);

    function l2ToL1EthBlock() external view returns (uint256);

    function l2ToL1Timestamp() external view returns (uint256);

    function l2ToL1BatchNum() external view returns (uint256);

    function l2ToL1OutputId() external view returns (bytes32);

    function processOutgoingMessages(bytes calldata sendsData, uint256[] calldata sendLengths)
        external;

    function outboxEntryExists(uint256 batchNum) external view returns (bool);
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

import "../INode.sol";
import "../../bridge/interfaces/IOutbox.sol";

interface IRollupUser {
    function initialize(address _stakeToken) external;

    function completeChallenge(address winningStaker, address losingStaker) external;

    function returnOldDeposit(address stakerAddress) external;

    function requireUnresolved(uint256 nodeNum) external view;

    function requireUnresolvedExists() external view;

    function countStakedZombies(INode node) external view returns (uint256);
}

interface IRollupAdmin {
    event OwnerFunctionCalled(uint256 indexed id);

    /**
     * @notice Add a contract authorized to put messages into this rollup's inbox
     * @param _outbox Outbox contract to add
     */
    function setOutbox(IOutbox _outbox) external;

    /**
     * @notice Disable an old outbox from interacting with the bridge
     * @param _outbox Outbox contract to remove
     */
    function removeOldOutbox(address _outbox) external;

    /**
     * @notice Enable or disable an inbox contract
     * @param _inbox Inbox contract to add or remove
     * @param _enabled New status of inbox
     */
    function setInbox(address _inbox, bool _enabled) external;

    /**
     * @notice Pause interaction with the rollup contract
     */
    function pause() external;

    /**
     * @notice Resume interaction with the rollup contract
     */
    function resume() external;

    /**
     * @notice Set the addresses of rollup logic facets called
     * @param newAdminFacet address of logic that owner of rollup calls
     * @param newUserFacet ddress of logic that user of rollup calls
     */
    function setFacets(address newAdminFacet, address newUserFacet) external;

    /**
     * @notice Set the addresses of the validator whitelist
     * @dev It is expected that both arrays are same length, and validator at
     * position i corresponds to the value at position i
     * @param _validator addresses to set in the whitelist
     * @param _val value to set in the whitelist for corresponding address
     */
    function setValidator(address[] memory _validator, bool[] memory _val) external;

    /**
     * @notice Set a new owner address for the rollup
     * @param newOwner address of new rollup owner
     */
    function setOwner(address newOwner) external;

    /**
     * @notice Set minimum assertion period for the rollup
     * @param newPeriod new minimum period for assertions
     */
    function setMinimumAssertionPeriod(uint256 newPeriod) external;

    /**
     * @notice Set number of blocks until a node is considered confirmed
     * @param newConfirmPeriod new number of blocks until a node is confirmed
     */
    function setConfirmPeriodBlocks(uint256 newConfirmPeriod) external;

    /**
     * @notice Set number of extra blocks after a challenge
     * @param newExtraTimeBlocks new number of blocks
     */
    function setExtraChallengeTimeBlocks(uint256 newExtraTimeBlocks) external;

    /**
     * @notice Set speed limit per block
     * @param newAvmGasSpeedLimitPerBlock maximum avmgas to be used per block
     */
    function setAvmGasSpeedLimitPerBlock(uint256 newAvmGasSpeedLimitPerBlock) external;

    /**
     * @notice Set base stake required for an assertion
     * @param newBaseStake maximum avmgas to be used per block
     */
    function setBaseStake(uint256 newBaseStake) external;

    /**
     * @notice Set the token used for stake, where address(0) == eth
     * @dev Before changing the base stake token, you might need to change the
     * implementation of the Rollup User facet!
     * @param newStakeToken address of token used for staking
     */
    function setStakeToken(address newStakeToken) external;

    /**
     * @notice Set max delay for sequencer inbox
     * @param newSequencerInboxMaxDelayBlocks max number of blocks
     * @param newSequencerInboxMaxDelaySeconds max number of seconds
     */
    function setSequencerInboxMaxDelay(
        uint256 newSequencerInboxMaxDelayBlocks,
        uint256 newSequencerInboxMaxDelaySeconds
    ) external;

    /**
     * @notice Set execution bisection degree
     * @param newChallengeExecutionBisectionDegree execution bisection degree
     */
    function setChallengeExecutionBisectionDegree(uint256 newChallengeExecutionBisectionDegree)
        external;

    /**
     * @notice Updates a whitelist address for its consumers
     * @dev setting the newWhitelist to address(0) disables it for consumers
     * @param whitelist old whitelist to be deprecated
     * @param newWhitelist new whitelist to be used
     * @param targets whitelist consumers to be triggered
     */
    function updateWhitelistConsumers(
        address whitelist,
        address newWhitelist,
        address[] memory targets
    ) external;

    /**
     * @notice Updates a whitelist's entries
     * @dev user at position i will be assigned value i
     * @param whitelist whitelist to be updated
     * @param user users to be updated in the whitelist
     * @param val if user is or not allowed in the whitelist
     */
    function setWhitelistEntries(
        address whitelist,
        address[] memory user,
        bool[] memory val
    ) external;

    /**
     * @notice Updates whether an address is a sequencer at the sequencer inbox
     * @param newSequencer address to be modified
     * @param isSequencer whether this address should be authorized as a sequencer
     */
    function setIsSequencer(address newSequencer, bool isSequencer) external;

    /**
     * @notice Upgrades the implementation of a beacon controlled by the rollup
     * @param beacon address of beacon to be upgraded
     * @param newImplementation new address of implementation
     */
    function upgradeBeacon(address beacon, address newImplementation) external;

    function forceResolveChallenge(address[] memory stackerA, address[] memory stackerB) external;

    function forceRefundStaker(address[] memory stacker) external;

    function forceCreateNode(
        bytes32 expectedNodeHash,
        bytes32[3][2] calldata assertionBytes32Fields,
        uint256[4][2] calldata assertionIntFields,
        bytes calldata sequencerBatchProof,
        uint256 beforeProposedBlock,
        uint256 beforeInboxMaxCount,
        uint256 prevNode
    ) external;

    function forceConfirmNode(
        uint256 nodeNum,
        bytes32 beforeSendAcc,
        bytes calldata sendsData,
        uint256[] calldata sendLengths,
        uint256 afterSendCount,
        bytes32 afterLogAcc,
        uint256 afterLogCount
    ) external;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

import "./INode.sol";

interface IRollupCore {
    function _stakerMap(address stakerAddress)
        external
        view
        returns (
            uint256,
            uint256,
            uint256,
            address,
            bool
        );

    event RollupCreated(bytes32 machineHash);

    event NodeCreated(
        uint256 indexed nodeNum,
        bytes32 indexed parentNodeHash,
        bytes32 nodeHash,
        bytes32 executionHash,
        uint256 inboxMaxCount,
        uint256 afterInboxBatchEndCount,
        bytes32 afterInboxBatchAcc,
        bytes32[3][2] assertionBytes32Fields,
        uint256[4][2] assertionIntFields
    );

    event NodeConfirmed(
        uint256 indexed nodeNum,
        bytes32 afterSendAcc,
        uint256 afterSendCount,
        bytes32 afterLogAcc,
        uint256 afterLogCount
    );

    event NodeRejected(uint256 indexed nodeNum);

    event RollupChallengeStarted(
        address indexed challengeContract,
        address asserter,
        address challenger,
        uint256 challengedNode
    );

    event UserStakeUpdated(address indexed user, uint256 initialBalance, uint256 finalBalance);

    event UserWithdrawableFundsUpdated(
        address indexed user,
        uint256 initialBalance,
        uint256 finalBalance
    );

    function getNode(uint256 nodeNum) external view returns (INode);

    /**
     * @notice Get the address of the staker at the given index
     * @param stakerNum Index of the staker
     * @return Address of the staker
     */
    function getStakerAddress(uint256 stakerNum) external view returns (address);

    /**
     * @notice Check whether the given staker is staked
     * @param staker Staker address to check
     * @return True or False for whether the staker was staked
     */
    function isStaked(address staker) external view returns (bool);

    /**
     * @notice Get the latest staked node of the given staker
     * @param staker Staker address to lookup
     * @return Latest node staked of the staker
     */
    function latestStakedNode(address staker) external view returns (uint256);

    /**
     * @notice Get the current challenge of the given staker
     * @param staker Staker address to lookup
     * @return Current challenge of the staker
     */
    function currentChallenge(address staker) external view returns (address);

    /**
     * @notice Get the amount staked of the given staker
     * @param staker Staker address to lookup
     * @return Amount staked of the staker
     */
    function amountStaked(address staker) external view returns (uint256);

    /**
     * @notice Get the original staker address of the zombie at the given index
     * @param zombieNum Index of the zombie to lookup
     * @return Original staker address of the zombie
     */
    function zombieAddress(uint256 zombieNum) external view returns (address);

    /**
     * @notice Get Latest node that the given zombie at the given index is staked on
     * @param zombieNum Index of the zombie to lookup
     * @return Latest node that the given zombie is staked on
     */
    function zombieLatestStakedNode(uint256 zombieNum) external view returns (uint256);

    /// @return Current number of un-removed zombies
    function zombieCount() external view returns (uint256);

    function isZombie(address staker) external view returns (bool);

    /**
     * @notice Get the amount of funds withdrawable by the given address
     * @param owner Address to check the funds of
     * @return Amount of funds withdrawable by owner
     */
    function withdrawableFunds(address owner) external view returns (uint256);

    /**
     * @return Index of the first unresolved node
     * @dev If all nodes have been resolved, this will be latestNodeCreated + 1
     */
    function firstUnresolvedNode() external view returns (uint256);

    /// @return Index of the latest confirmed node
    function latestConfirmed() external view returns (uint256);

    /// @return Index of the latest rollup node created
    function latestNodeCreated() external view returns (uint256);

    /// @return Ethereum block that the most recent stake was created
    function lastStakeBlock() external view returns (uint256);

    /// @return Number of active stakers currently staked
    function stakerCount() external view returns (uint256);

    /// @return Node hash as of this node number
    function getNodeHash(uint256 index) external view returns (bytes32);
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

interface ISequencerInbox {
    event SequencerBatchDelivered(
        uint256 indexed firstMessageNum,
        bytes32 indexed beforeAcc,
        uint256 newMessageCount,
        bytes32 afterAcc,
        bytes transactions,
        uint256[] lengths,
        uint256[] sectionsMetadata,
        uint256 seqBatchIndex,
        address sequencer
    );

    event SequencerBatchDeliveredFromOrigin(
        uint256 indexed firstMessageNum,
        bytes32 indexed beforeAcc,
        uint256 newMessageCount,
        bytes32 afterAcc,
        uint256 seqBatchIndex
    );

    event DelayedInboxForced(
        uint256 indexed firstMessageNum,
        bytes32 indexed beforeAcc,
        uint256 newMessageCount,
        uint256 totalDelayedMessagesRead,
        bytes32[2] afterAccAndDelayed,
        uint256 seqBatchIndex
    );

    /// @notice DEPRECATED - look at IsSequencerUpdated for new updates
    // event SequencerAddressUpdated(address newAddress);

    event IsSequencerUpdated(address addr, bool isSequencer);
    event MaxDelayUpdated(uint256 newMaxDelayBlocks, uint256 newMaxDelaySeconds);

    /// @notice DEPRECATED - look at MaxDelayUpdated for new updates
    // event MaxDelayBlocksUpdated(uint256 newValue);
    /// @notice DEPRECATED - look at MaxDelayUpdated for new updates
    // event MaxDelaySecondsUpdated(uint256 newValue);

    function setMaxDelay(uint256 newMaxDelayBlocks, uint256 newMaxDelaySeconds) external;

    function setIsSequencer(address addr, bool isSequencer) external;

    function messageCount() external view returns (uint256);

    function maxDelayBlocks() external view returns (uint256);

    function maxDelaySeconds() external view returns (uint256);

    function inboxAccs(uint256 index) external view returns (bytes32);

    function getInboxAccsLength() external view returns (uint256);

    function proveInboxContainsMessage(bytes calldata proof, uint256 inboxCount)
        external
        view
        returns (uint256, bytes32);

    /// @notice DEPRECATED - use isSequencer instead
    function sequencer() external view returns (address);

    function isSequencer(address seq) external view returns (bool);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2019-2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

import "../libraries/MerkleLib.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";

library ChallengeLib {
    using SafeMath for uint256;

    function firstSegmentSize(uint256 totalCount, uint256 bisectionCount)
        internal
        pure
        returns (uint256)
    {
        return totalCount / bisectionCount + (totalCount % bisectionCount);
    }

    function otherSegmentSize(uint256 totalCount, uint256 bisectionCount)
        internal
        pure
        returns (uint256)
    {
        return totalCount / bisectionCount;
    }

    function bisectionChunkHash(
        uint256 _segmentStart,
        uint256 _segmentLength,
        bytes32 _startHash,
        bytes32 _endHash
    ) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(_segmentStart, _segmentLength, _startHash, _endHash));
    }

    function assertionHash(uint256 _avmGasUsed, bytes32 _restHash) internal pure returns (bytes32) {
        // Note: make sure this doesn't return Challenge.UNREACHABLE_ASSERTION (currently 0)
        return keccak256(abi.encodePacked(_avmGasUsed, _restHash));
    }

    function assertionRestHash(
        uint256 _totalMessagesRead,
        bytes32 _machineState,
        bytes32 _sendAcc,
        uint256 _sendCount,
        bytes32 _logAcc,
        uint256 _logCount
    ) internal pure returns (bytes32) {
        return
            keccak256(
                abi.encodePacked(
                    _totalMessagesRead,
                    _machineState,
                    _sendAcc,
                    _sendCount,
                    _logAcc,
                    _logCount
                )
            );
    }

    function updatedBisectionRoot(
        bytes32[] memory _chainHashes,
        uint256 _challengedSegmentStart,
        uint256 _challengedSegmentLength
    ) internal pure returns (bytes32) {
        uint256 bisectionCount = _chainHashes.length - 1;
        bytes32[] memory hashes = new bytes32[](bisectionCount);
        uint256 chunkSize = ChallengeLib.firstSegmentSize(_challengedSegmentLength, bisectionCount);
        uint256 segmentStart = _challengedSegmentStart;
        hashes[0] = ChallengeLib.bisectionChunkHash(
            segmentStart,
            chunkSize,
            _chainHashes[0],
            _chainHashes[1]
        );
        segmentStart = segmentStart.add(chunkSize);
        chunkSize = ChallengeLib.otherSegmentSize(_challengedSegmentLength, bisectionCount);
        for (uint256 i = 1; i < bisectionCount; i++) {
            hashes[i] = ChallengeLib.bisectionChunkHash(
                segmentStart,
                chunkSize,
                _chainHashes[i],
                _chainHashes[i + 1]
            );
            segmentStart = segmentStart.add(chunkSize);
        }
        return MerkleLib.generateRoot(hashes);
    }

    function verifySegmentProof(
        bytes32 challengeState,
        bytes32 item,
        bytes32[] calldata _merkleNodes,
        uint256 _merkleRoute
    ) internal pure returns (bool) {
        return challengeState == MerkleLib.calculateRoot(_merkleNodes, _merkleRoute, item);
    }
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2019-2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

library MerkleLib {
    function generateRoot(bytes32[] memory _hashes) internal pure returns (bytes32) {
        bytes32[] memory prevLayer = _hashes;
        while (prevLayer.length > 1) {
            bytes32[] memory nextLayer = new bytes32[]((prevLayer.length + 1) / 2);
            for (uint256 i = 0; i < nextLayer.length; i++) {
                if (2 * i + 1 < prevLayer.length) {
                    nextLayer[i] = keccak256(
                        abi.encodePacked(prevLayer[2 * i], prevLayer[2 * i + 1])
                    );
                } else {
                    nextLayer[i] = prevLayer[2 * i];
                }
            }
            prevLayer = nextLayer;
        }
        return prevLayer[0];
    }

    function calculateRoot(
        bytes32[] memory nodes,
        uint256 route,
        bytes32 item
    ) internal pure returns (bytes32) {
        uint256 proofItems = nodes.length;
        require(proofItems <= 256);
        bytes32 h = item;
        for (uint256 i = 0; i < proofItems; i++) {
            if (route % 2 == 0) {
                h = keccak256(abi.encodePacked(nodes[i], h));
            } else {
                h = keccak256(abi.encodePacked(h, nodes[i]));
            }
            route /= 2;
        }
        return h;
    }
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2019, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

interface ICloneable {
    function isMaster() external view returns (bool);
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2020, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

import "../bridge/interfaces/IBridge.sol";
import "../bridge/interfaces/ISequencerInbox.sol";

interface IOneStepProof {
    // Bridges is sequencer bridge then delayed bridge
    function executeStep(
        address[2] calldata bridges,
        uint256 initialMessagesRead,
        bytes32[2] calldata accs,
        bytes calldata proof,
        bytes calldata bproof
    )
        external
        view
        returns (
            uint64 gas,
            uint256 afterMessagesRead,
            bytes32[4] memory fields
        );

    function executeStepDebug(
        address[2] calldata bridges,
        uint256 initialMessagesRead,
        bytes32[2] calldata accs,
        bytes calldata proof,
        bytes calldata bproof
    ) external view returns (string memory startMachine, string memory afterMachine);
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2019-2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

import "./interfaces/IOutbox.sol";
import "./interfaces/IBridge.sol";

import "./Messages.sol";
import "../libraries/MerkleLib.sol";
import "../libraries/BytesLib.sol";
import "../libraries/Cloneable.sol";

import "@openzeppelin/contracts/proxy/BeaconProxy.sol";
import "@openzeppelin/contracts/proxy/UpgradeableBeacon.sol";

contract Outbox is IOutbox, Cloneable {
    using BytesLib for bytes;

    struct OutboxEntry {
        // merkle root of outputs
        bytes32 root;
        // mapping from output id => is spent
        mapping(bytes32 => bool) spentOutput;
    }

    bytes1 internal constant MSG_ROOT = 0;

    uint8 internal constant SendType_sendTxToL1 = 3;

    address public rollup;
    IBridge public bridge;

    mapping(uint256 => OutboxEntry) public outboxEntries;

    struct L2ToL1Context {
        uint128 l2Block;
        uint128 l1Block;
        uint128 timestamp;
        uint128 batchNum;
        bytes32 outputId;
        address sender;
    }
    // Note, these variables are set and then wiped during a single transaction.
    // Therefore their values don't need to be maintained, and their slots will
    // be empty outside of transactions
    L2ToL1Context internal context;
    uint128 public constant OUTBOX_VERSION = 1;

    function initialize(address _rollup, IBridge _bridge) external {
        require(rollup == address(0), "ALREADY_INIT");
        rollup = _rollup;
        bridge = _bridge;
    }

    /// @notice When l2ToL1Sender returns a nonzero address, the message was originated by an L2 account
    /// When the return value is zero, that means this is a system message
    /// @dev the l2ToL1Sender behaves as the tx.origin, the msg.sender should be validated to protect against reentrancies
    function l2ToL1Sender() external view override returns (address) {
        return context.sender;
    }

    function l2ToL1Block() external view override returns (uint256) {
        return uint256(context.l2Block);
    }

    function l2ToL1EthBlock() external view override returns (uint256) {
        return uint256(context.l1Block);
    }

    function l2ToL1Timestamp() external view override returns (uint256) {
        return uint256(context.timestamp);
    }

    function l2ToL1BatchNum() external view override returns (uint256) {
        return uint256(context.batchNum);
    }

    function l2ToL1OutputId() external view override returns (bytes32) {
        return context.outputId;
    }

    function processOutgoingMessages(bytes calldata sendsData, uint256[] calldata sendLengths)
        external
        override
    {
        require(msg.sender == rollup, "ONLY_ROLLUP");
        // If we've reached here, we've already confirmed that sum(sendLengths) == sendsData.length
        uint256 messageCount = sendLengths.length;
        uint256 offset = 0;
        for (uint256 i = 0; i < messageCount; i++) {
            handleOutgoingMessage(bytes(sendsData[offset:offset + sendLengths[i]]));
            offset += sendLengths[i];
        }
    }

    function handleOutgoingMessage(bytes memory data) private {
        // Otherwise we have an unsupported message type and we skip the message
        if (data[0] == MSG_ROOT) {
            require(data.length == 97, "BAD_LENGTH");
            uint256 batchNum = data.toUint(1);
            // Ensure no outbox entry already exists w/ batch number
            require(!outboxEntryExists(batchNum), "ENTRY_ALREADY_EXISTS");

            // This is the total number of msgs included in the root, it can be used to
            // detect when all msgs were executed against a root.
            // It currently isn't stored, but instead emitted in an event for utility
            uint256 numInBatch = data.toUint(33);
            bytes32 outputRoot = data.toBytes32(65);

            OutboxEntry memory newOutboxEntry = OutboxEntry(outputRoot);
            outboxEntries[batchNum] = newOutboxEntry;
            // keeping redundant batchnum in event (batchnum and old outboxindex field) for outbox version interface compatibility
            emit OutboxEntryCreated(batchNum, batchNum, outputRoot, numInBatch);
        }
    }

    /**
     * @notice Executes a messages in an Outbox entry.
     * @dev Reverts if dispute period hasn't expired, since the outbox entry
     * is only created once the rollup confirms the respective assertion.
     * @param batchNum Index of OutboxEntry in outboxEntries array
     * @param proof Merkle proof of message inclusion in outbox entry
     * @param index Merkle path to message
     * @param l2Sender sender if original message (i.e., caller of ArbSys.sendTxToL1)
     * @param destAddr destination address for L1 contract call
     * @param l2Block l2 block number at which sendTxToL1 call was made
     * @param l1Block l1 block number at which sendTxToL1 call was made
     * @param l2Timestamp l2 Timestamp at which sendTxToL1 call was made
     * @param amount value in L1 message in wei
     * @param calldataForL1 abi-encoded L1 message data
     */
    function executeTransaction(
        uint256 batchNum,
        bytes32[] calldata proof,
        uint256 index,
        address l2Sender,
        address destAddr,
        uint256 l2Block,
        uint256 l1Block,
        uint256 l2Timestamp,
        uint256 amount,
        bytes calldata calldataForL1
    ) external virtual {
        bytes32 outputId;
        {
            bytes32 userTx =
                calculateItemHash(
                    l2Sender,
                    destAddr,
                    l2Block,
                    l1Block,
                    l2Timestamp,
                    amount,
                    calldataForL1
                );

            outputId = recordOutputAsSpent(batchNum, proof, index, userTx);
            emit OutBoxTransactionExecuted(destAddr, l2Sender, batchNum, index);
        }

        // we temporarily store the previous values so the outbox can naturally
        // unwind itself when there are nested calls to `executeTransaction`
        L2ToL1Context memory prevContext = context;

        context = L2ToL1Context({
            sender: l2Sender,
            l2Block: uint128(l2Block),
            l1Block: uint128(l1Block),
            timestamp: uint128(l2Timestamp),
            batchNum: uint128(batchNum),
            outputId: outputId
        });

        // set and reset vars around execution so they remain valid during call
        executeBridgeCall(destAddr, amount, calldataForL1);

        context = prevContext;
    }

    function recordOutputAsSpent(
        uint256 batchNum,
        bytes32[] memory proof,
        uint256 path,
        bytes32 item
    ) internal returns (bytes32) {
        require(proof.length < 256, "PROOF_TOO_LONG");
        require(path < 2**proof.length, "PATH_NOT_MINIMAL");

        // Hash the leaf an extra time to prove it's a leaf
        bytes32 calcRoot = calculateMerkleRoot(proof, path, item);
        OutboxEntry storage outboxEntry = outboxEntries[batchNum];
        require(outboxEntry.root != bytes32(0), "NO_OUTBOX_ENTRY");

        // With a minimal path, the pair of path and proof length should always identify
        // a unique leaf. The path itself is not enough since the path length to different
        // leaves could potentially be different
        bytes32 uniqueKey = keccak256(abi.encodePacked(path, proof.length));

        require(!outboxEntry.spentOutput[uniqueKey], "ALREADY_SPENT");
        require(calcRoot == outboxEntry.root, "BAD_ROOT");

        outboxEntry.spentOutput[uniqueKey] = true;
        return uniqueKey;
    }

    function executeBridgeCall(
        address destAddr,
        uint256 amount,
        bytes memory data
    ) internal {
        (bool success, bytes memory returndata) = bridge.executeCall(destAddr, amount, data);
        if (!success) {
            if (returndata.length > 0) {
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert("BRIDGE_CALL_FAILED");
            }
        }
    }

    function calculateItemHash(
        address l2Sender,
        address destAddr,
        uint256 l2Block,
        uint256 l1Block,
        uint256 l2Timestamp,
        uint256 amount,
        bytes calldata calldataForL1
    ) public pure returns (bytes32) {
        return
            keccak256(
                abi.encodePacked(
                    SendType_sendTxToL1,
                    uint256(uint160(bytes20(l2Sender))),
                    uint256(uint160(bytes20(destAddr))),
                    l2Block,
                    l1Block,
                    l2Timestamp,
                    amount,
                    calldataForL1
                )
            );
    }

    function calculateMerkleRoot(
        bytes32[] memory proof,
        uint256 path,
        bytes32 item
    ) public pure returns (bytes32) {
        return MerkleLib.calculateRoot(proof, path, keccak256(abi.encodePacked(item)));
    }

    function outboxEntryExists(uint256 batchNum) public view override returns (bool) {
        return outboxEntries[batchNum].root != bytes32(0);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../utils/ContextUpgradeable.sol";
import "../proxy/Initializable.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    function __Ownable_init() internal initializer {
        __Context_init_unchained();
        __Ownable_init_unchained();
    }

    function __Ownable_init_unchained() internal initializer {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
    uint256[49] private __gap;
}

// SPDX-License-Identifier: MIT

/*
 * @title Solidity Bytes Arrays Utils
 * @author Gonçalo Sá <[email protected]>
 *
 * @dev Bytes tightly packed arrays utility library for ethereum contracts written in Solidity.
 *      The library lets you concatenate, slice and type cast bytes arrays both in memory and storage.
 */

pragma solidity ^0.6.11;

/* solhint-disable no-inline-assembly */
library BytesLib {
    function toAddress(bytes memory _bytes, uint256 _start) internal pure returns (address) {
        require(_bytes.length >= (_start + 20), "Read out of bounds");
        address tempAddress;

        assembly {
            tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)
        }

        return tempAddress;
    }

    function toUint8(bytes memory _bytes, uint256 _start) internal pure returns (uint8) {
        require(_bytes.length >= (_start + 1), "Read out of bounds");
        uint8 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x1), _start))
        }

        return tempUint;
    }

    function toUint(bytes memory _bytes, uint256 _start) internal pure returns (uint256) {
        require(_bytes.length >= (_start + 32), "Read out of bounds");
        uint256 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x20), _start))
        }

        return tempUint;
    }

    function toBytes32(bytes memory _bytes, uint256 _start) internal pure returns (bytes32) {
        require(_bytes.length >= (_start + 32), "Read out of bounds");
        bytes32 tempBytes32;

        assembly {
            tempBytes32 := mload(add(add(_bytes, 0x20), _start))
        }

        return tempBytes32;
    }
}
/* solhint-enable no-inline-assembly */

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "./Proxy.sol";
import "../utils/Address.sol";
import "./IBeacon.sol";

/**
 * @dev This contract implements a proxy that gets the implementation address for each call from a {UpgradeableBeacon}.
 *
 * The beacon address is stored in storage slot `uint256(keccak256('eip1967.proxy.beacon')) - 1`, so that it doesn't
 * conflict with the storage layout of the implementation behind the proxy.
 *
 * _Available since v3.4._
 */
contract BeaconProxy is Proxy {
    /**
     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
     * This is bytes32(uint256(keccak256('eip1967.proxy.beacon')) - 1)) and is validated in the constructor.
     */
    bytes32 private constant _BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;

    /**
     * @dev Initializes the proxy with `beacon`.
     *
     * If `data` is nonempty, it's used as data in a delegate call to the implementation returned by the beacon. This
     * will typically be an encoded function call, and allows initializating the storage of the proxy like a Solidity
     * constructor.
     *
     * Requirements:
     *
     * - `beacon` must be a contract with the interface {IBeacon}.
     */
    constructor(address beacon, bytes memory data) public payable {
        assert(_BEACON_SLOT == bytes32(uint256(keccak256("eip1967.proxy.beacon")) - 1));
        _setBeacon(beacon, data);
    }

    /**
     * @dev Returns the current beacon address.
     */
    function _beacon() internal view virtual returns (address beacon) {
        bytes32 slot = _BEACON_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            beacon := sload(slot)
        }
    }

    /**
     * @dev Returns the current implementation address of the associated beacon.
     */
    function _implementation() internal view virtual override returns (address) {
        return IBeacon(_beacon()).implementation();
    }

    /**
     * @dev Changes the proxy to use a new beacon.
     *
     * If `data` is nonempty, it's used as data in a delegate call to the implementation returned by the beacon.
     *
     * Requirements:
     *
     * - `beacon` must be a contract.
     * - The implementation returned by `beacon` must be a contract.
     */
    function _setBeacon(address beacon, bytes memory data) internal virtual {
        require(
            Address.isContract(beacon),
            "BeaconProxy: beacon is not a contract"
        );
        require(
            Address.isContract(IBeacon(beacon).implementation()),
            "BeaconProxy: beacon implementation is not a contract"
        );
        bytes32 slot = _BEACON_SLOT;

        // solhint-disable-next-line no-inline-assembly
        assembly {
            sstore(slot, beacon)
        }

        if (data.length > 0) {
            Address.functionDelegateCall(_implementation(), data, "BeaconProxy: function call failed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "./IBeacon.sol";
import "../access/Ownable.sol";
import "../utils/Address.sol";

/**
 * @dev This contract is used in conjunction with one or more instances of {BeaconProxy} to determine their
 * implementation contract, which is where they will delegate all function calls.
 *
 * An owner is able to change the implementation the beacon points to, thus upgrading the proxies that use this beacon.
 */
contract UpgradeableBeacon is IBeacon, Ownable {
    address private _implementation;

    /**
     * @dev Emitted when the implementation returned by the beacon is changed.
     */
    event Upgraded(address indexed implementation);

    /**
     * @dev Sets the address of the initial implementation, and the deployer account as the owner who can upgrade the
     * beacon.
     */
    constructor(address implementation_) public {
        _setImplementation(implementation_);
    }

    /**
     * @dev Returns the current implementation address.
     */
    function implementation() public view virtual override returns (address) {
        return _implementation;
    }

    /**
     * @dev Upgrades the beacon to a new implementation.
     *
     * Emits an {Upgraded} event.
     *
     * Requirements:
     *
     * - msg.sender must be the owner of the contract.
     * - `newImplementation` must be a contract.
     */
    function upgradeTo(address newImplementation) public virtual onlyOwner {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
    }

    /**
     * @dev Sets the implementation contract address for this beacon
     *
     * Requirements:
     *
     * - `newImplementation` must be a contract.
     */
    function _setImplementation(address newImplementation) private {
        require(Address.isContract(newImplementation), "UpgradeableBeacon: implementation is not a contract");
        _implementation = newImplementation;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {BeaconProxy} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;
import "../proxy/Initializable.sol";

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal initializer {
        __Context_init_unchained();
    }

    function __Context_init_unchained() internal initializer {
    }
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
    uint256[50] private __gap;
}

// SPDX-License-Identifier: MIT

// solhint-disable-next-line compiler-version
pragma solidity >=0.4.24 <0.8.0;

import "../utils/AddressUpgradeable.sol";

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {UpgradeableProxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 */
abstract contract Initializable {

    /**
     * @dev Indicates that the contract has been initialized.
     */
    bool private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Modifier to protect an initializer function from being invoked twice.
     */
    modifier initializer() {
        require(_initializing || _isConstructor() || !_initialized, "Initializable: contract is already initialized");

        bool isTopLevelCall = !_initializing;
        if (isTopLevelCall) {
            _initializing = true;
            _initialized = true;
        }

        _;

        if (isTopLevelCall) {
            _initializing = false;
        }
    }

    /// @dev Returns true if and only if the function is running in the constructor
    function _isConstructor() private view returns (bool) {
        return !AddressUpgradeable.isContract(address(this));
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 100
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  },
  "metadata": {
    "useLiteralContent": true
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"messageNum","type":"uint256"},{"indexed":false,"internalType":"bytes","name":"data","type":"bytes"}],"name":"InboxMessageDelivered","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"messageNum","type":"uint256"}],"name":"InboxMessageDeliveredFromOrigin","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"bool","name":"enabled","type":"bool"}],"name":"PauseToggled","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"bool","name":"enabled","type":"bool"}],"name":"RewriteToggled","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"newSource","type":"address"}],"name":"WhitelistSourceUpdated","type":"event"},{"inputs":[],"name":"bridge","outputs":[{"internalType":"contract IBridge","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"destAddr","type":"address"},{"internalType":"uint256","name":"l2CallValue","type":"uint256"},{"internalType":"uint256","name":"maxSubmissionCost","type":"uint256"},{"internalType":"address","name":"excessFeeRefundAddress","type":"address"},{"internalType":"address","name":"callValueRefundAddress","type":"address"},{"internalType":"uint256","name":"maxGas","type":"uint256"},{"internalType":"uint256","name":"gasPriceBid","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"createRetryableTicket","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"destAddr","type":"address"},{"internalType":"uint256","name":"l2CallValue","type":"uint256"},{"internalType":"uint256","name":"maxSubmissionCost","type":"uint256"},{"internalType":"address","name":"excessFeeRefundAddress","type":"address"},{"internalType":"address","name":"callValueRefundAddress","type":"address"},{"internalType":"uint256","name":"maxGas","type":"uint256"},{"internalType":"uint256","name":"gasPriceBid","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"createRetryableTicketNoRefundAliasRewrite","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"uint256","name":"maxSubmissionCost","type":"uint256"}],"name":"depositEth","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"contract IBridge","name":"_bridge","type":"address"},{"internalType":"address","name":"_whitelist","type":"address"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"isCreateRetryablePaused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"isMaster","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pauseCreateRetryables","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"maxGas","type":"uint256"},{"internalType":"uint256","name":"gasPriceBid","type":"uint256"},{"internalType":"address","name":"destAddr","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"sendContractTransaction","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"maxGas","type":"uint256"},{"internalType":"uint256","name":"gasPriceBid","type":"uint256"},{"internalType":"address","name":"destAddr","type":"address"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"sendL1FundedContractTransaction","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"uint256","name":"maxGas","type":"uint256"},{"internalType":"uint256","name":"gasPriceBid","type":"uint256"},{"internalType":"uint256","name":"nonce","type":"uint256"},{"internalType":"address","name":"destAddr","type":"address"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"sendL1FundedUnsignedTransaction","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"bytes","name":"messageData","type":"bytes"}],"name":"sendL2Message","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes","name":"messageData","type":"bytes"}],"name":"sendL2MessageFromOrigin","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"maxGas","type":"uint256"},{"internalType":"uint256","name":"gasPriceBid","type":"uint256"},{"internalType":"uint256","name":"nonce","type":"uint256"},{"internalType":"address","name":"destAddr","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"sendUnsignedTransaction","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"shouldRewriteSender","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"startRewriteAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"stopRewriteAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"unpauseCreateRetryables","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newSource","type":"address"}],"name":"updateWhitelistSource","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"whitelist","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"}]

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