Contract

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity 0.8.24;

import "@openzeppelin/contracts/interfaces/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
import "@openzeppelin/contracts/access/Ownable2Step.sol";

import "@chainlink/contracts-ccip/src/v0.8/ccip/libraries/Client.sol";
import "@chainlink/contracts-ccip/src/v0.8/ccip/interfaces/IRouterClient.sol";
import "@chainlink/contracts-ccip/src/v0.8/shared/interfaces/IOwnable.sol";

import "./interfaces/ISnailEthereumTokenMigration.sol";

contract SnailEthereumTokenMigration is ISnailEthereumTokenMigration, Ownable2Step, ReentrancyGuard {
    using SafeERC20 for IERC20;
    IERC20 public immutable tokenToTransfer;
    
    uint64 public immutable destinationChain;
    address public destinationReceiver;
    
    IRouterClient public immutable crossChainRouter;
    mapping(address => uint256) private amountsTransferred;
    
    receive() external payable {}   //  allow contract accept ETH
    
    constructor(IERC20 _tokenToTransfer, IRouterClient _crossChainRouter, uint64 _destinationChain) Ownable(msg.sender) {
        require(address(_tokenToTransfer) != address(0), "Token address cannot be zero");
        require(address(_crossChainRouter) != address(0), "Cross chain router address cannot be zero");
        
        tokenToTransfer = _tokenToTransfer;
        tokenToTransfer.safeIncreaseAllowance(IOwnable(address(tokenToTransfer)).owner(), tokenToTransfer.totalSupply());
        
        crossChainRouter = _crossChainRouter;
        destinationChain = _destinationChain;
    }
    
    function transferTokens() external payable override nonReentrant {
        require(destinationReceiver != address(0), "Destination receiver not set");
        require(amountsTransferred[msg.sender] == 0, "Tokens for this address have already been migrated");
        
        uint256 amount = tokenToTransfer.balanceOf(msg.sender);
        require(amount > 0, "Transfer amount must be greater than 0");
        
        tokenToTransfer.safeTransferFrom(msg.sender, address(this), amount);
        amountsTransferred[msg.sender] = amount;
        
        Client.EVM2AnyMessage memory message = Client.EVM2AnyMessage({
            receiver: abi.encode(destinationReceiver),
            data: abi.encode(msg.sender, amount),
            tokenAmounts: new Client.EVMTokenAmount[](0) ,
            extraArgs: "",
            feeToken: address(0)
        });
        
        uint256 feeAmount = crossChainRouter.getFee(destinationChain, message);
        require(msg.value >= feeAmount, "Insufficient fee for transaction");
        
        bytes32 messageId = crossChainRouter.ccipSend{value: feeAmount} (destinationChain, message);
        emit TokensTransferred(messageId, amount);
    }
    
    function getTransferTokensFee() external override view returns (uint256) {
        require(destinationReceiver != address(0), "Destination receiver not set");
        
        Client.EVM2AnyMessage memory message = Client.EVM2AnyMessage({
            receiver: abi.encode(destinationReceiver),
            data: abi.encode(msg.sender, tokenToTransfer.balanceOf(msg.sender)),
            tokenAmounts: new Client.EVMTokenAmount[](0) ,
            extraArgs: "",
            feeToken: address(0)
        });
        return crossChainRouter.getFee(destinationChain, message);
    }
    
    function getTransferredTokensAmount(address holder) external view returns (uint256) {
        require(holder != address(0), "Holder address cannot be zero");
        return amountsTransferred[holder];
    }
    
    function setDestinationReceiver(address receiver) external override onlyOwner {
        require(receiver != address(0), "Invalid destination receiver address");
        destinationReceiver = receiver;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {Client} from "../libraries/Client.sol";

interface IRouterClient {
  error UnsupportedDestinationChain(uint64 destChainSelector);
  error InsufficientFeeTokenAmount();
  error InvalidMsgValue();

  /// @notice Checks if the given chain ID is supported for sending/receiving.
  /// @param chainSelector The chain to check.
  /// @return supported is true if it is supported, false if not.
  function isChainSupported(uint64 chainSelector) external view returns (bool supported);

  /// @notice Gets a list of all supported tokens which can be sent or received
  /// to/from a given chain id.
  /// @param chainSelector The chainSelector.
  /// @return tokens The addresses of all tokens that are supported.
  function getSupportedTokens(uint64 chainSelector) external view returns (address[] memory tokens);

  /// @param destinationChainSelector The destination chainSelector
  /// @param message The cross-chain CCIP message including data and/or tokens
  /// @return fee returns execution fee for the message
  /// delivery to destination chain, denominated in the feeToken specified in the message.
  /// @dev Reverts with appropriate reason upon invalid message.
  function getFee(
    uint64 destinationChainSelector,
    Client.EVM2AnyMessage memory message
  ) external view returns (uint256 fee);

  /// @notice Request a message to be sent to the destination chain
  /// @param destinationChainSelector The destination chain ID
  /// @param message The cross-chain CCIP message including data and/or tokens
  /// @return messageId The message ID
  /// @dev Note if msg.value is larger than the required fee (from getFee) we accept
  /// the overpayment with no refund.
  /// @dev Reverts with appropriate reason upon invalid message.
  function ccipSend(
    uint64 destinationChainSelector,
    Client.EVM2AnyMessage calldata message
  ) external payable returns (bytes32);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

// End consumer library.
library Client {
  /// @dev RMN depends on this struct, if changing, please notify the RMN maintainers.
  struct EVMTokenAmount {
    address token; // token address on the local chain.
    uint256 amount; // Amount of tokens.
  }

  struct Any2EVMMessage {
    bytes32 messageId; // MessageId corresponding to ccipSend on source.
    uint64 sourceChainSelector; // Source chain selector.
    bytes sender; // abi.decode(sender) if coming from an EVM chain.
    bytes data; // payload sent in original message.
    EVMTokenAmount[] destTokenAmounts; // Tokens and their amounts in their destination chain representation.
  }

  // If extraArgs is empty bytes, the default is 200k gas limit.
  struct EVM2AnyMessage {
    bytes receiver; // abi.encode(receiver address) for dest EVM chains
    bytes data; // Data payload
    EVMTokenAmount[] tokenAmounts; // Token transfers
    address feeToken; // Address of feeToken. address(0) means you will send msg.value.
    bytes extraArgs; // Populate this with _argsToBytes(EVMExtraArgsV1)
  }

  // bytes4(keccak256("CCIP EVMExtraArgsV1"));
  bytes4 public constant EVM_EXTRA_ARGS_V1_TAG = 0x97a657c9;
  struct EVMExtraArgsV1 {
    uint256 gasLimit;
  }

  function _argsToBytes(EVMExtraArgsV1 memory extraArgs) internal pure returns (bytes memory bts) {
    return abi.encodeWithSelector(EVM_EXTRA_ARGS_V1_TAG, extraArgs);
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IOwnable {
  function owner() external returns (address);

  function transferOwnership(address recipient) external;

  function acceptOwnership() external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {Context} from "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable2Step.sol)

pragma solidity ^0.8.20;

import {Ownable} from "./Ownable.sol";

/**
 * @dev Contract module which provides access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is specified at deployment time in the constructor for `Ownable`. This
 * can later be changed with {transferOwnership} and {acceptOwnership}.
 *
 * This module is used through inheritance. It will make available all functions
 * from parent (Ownable).
 */
abstract contract Ownable2Step is Ownable {
    address private _pendingOwner;

    event OwnershipTransferStarted(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Returns the address of the pending owner.
     */
    function pendingOwner() public view virtual returns (address) {
        return _pendingOwner;
    }

    /**
     * @dev Starts the ownership transfer of the contract to a new account. Replaces the pending transfer if there is one.
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual override onlyOwner {
        _pendingOwner = newOwner;
        emit OwnershipTransferStarted(owner(), newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`) and deletes any pending owner.
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual override {
        delete _pendingOwner;
        super._transferOwnership(newOwner);
    }

    /**
     * @dev The new owner accepts the ownership transfer.
     */
    function acceptOwnership() public virtual {
        address sender = _msgSender();
        if (pendingOwner() != sender) {
            revert OwnableUnauthorizedAccount(sender);
        }
        _transferOwnership(sender);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../token/ERC20/IERC20.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/ReentrancyGuard.sol)

pragma solidity ^0.8.20;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant NOT_ENTERED = 1;
    uint256 private constant ENTERED = 2;

    uint256 private _status;

    /**
     * @dev Unauthorized reentrant call.
     */
    error ReentrancyGuardReentrantCall();

    constructor() {
        _status = NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be NOT_ENTERED
        if (_status == ENTERED) {
            revert ReentrancyGuardReentrantCall();
        }

        // Any calls to nonReentrant after this point will fail
        _status = ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == ENTERED;
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity 0.8.24;

interface ISnailEthereumTokenMigration {
    event TokensTransferred(bytes32 indexed messageId, uint256 amount);
    function transferTokens() external payable;
    function getTransferTokensFee() external view returns (uint256);
    function getTransferredTokensAmount(address holder) external view returns (uint256);
    function setDestinationReceiver(address receiver) external;
}

{
  "optimizer": {
    "enabled": true,
    "runs": 1000000
  },
  "evmVersion": "paris",
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"contract IERC20","name":"_tokenToTransfer","type":"address"},{"internalType":"contract IRouterClient","name":"_crossChainRouter","type":"address"},{"internalType":"uint64","name":"_destinationChain","type":"uint64"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"AddressEmptyCode","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"AddressInsufficientBalance","type":"error"},{"inputs":[],"name":"FailedInnerCall","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"OwnableInvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"OwnableUnauthorizedAccount","type":"error"},{"inputs":[],"name":"ReentrancyGuardReentrantCall","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"SafeERC20FailedOperation","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferStarted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"messageId","type":"bytes32"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"TokensTransferred","type":"event"},{"inputs":[],"name":"acceptOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"crossChainRouter","outputs":[{"internalType":"contract IRouterClient","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"destinationChain","outputs":[{"internalType":"uint64","name":"","type":"uint64"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"destinationReceiver","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getTransferTokensFee","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"holder","type":"address"}],"name":"getTransferredTokensAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pendingOwner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"setDestinationReceiver","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"tokenToTransfer","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"transferTokens","outputs":[],"stateMutability":"payable","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

0000000000000000000000006bc40d4099f9057b23af309c08d935b890d7adc000000000000000000000000080226fc0ee2b096224eeac085bb9a8cba1146f7d000000000000000000000000000000000000000000000000dda641cfe44aff82

-----Decoded View---------------
Arg [0] : _tokenToTransfer (address): 0x6Bc40d4099f9057b23aF309C08d935b890d7Adc0
Arg [1] : _crossChainRouter (address): 0x80226fc0Ee2b096224EeAc085Bb9a8cba1146f7D
Arg [2] : _destinationChain (uint64): 15971525489660198786

-----Encoded View---------------
3 Constructor Arguments found :
Arg [0] : 0000000000000000000000006bc40d4099f9057b23af309c08d935b890d7adc0
Arg [1] : 00000000000000000000000080226fc0ee2b096224eeac085bb9a8cba1146f7d
Arg [2] : 000000000000000000000000000000000000000000000000dda641cfe44aff82