Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

//SPDX-License-Identifier: MIT
pragma solidity 0.8.21;

import {
    Ownable2Step,
    Ownable
} from "@openzeppelin/contracts/access/Ownable2Step.sol";
import { Pausable } from "@openzeppelin/contracts/utils/Pausable.sol";
import { SafeERC20 } from
    "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import { IERC7540, IERC4626 } from "./interfaces/IERC7540.sol";
import { PermitParams, AsyncVault } from "./AsyncVault.sol";
import { ERC20Permit } from
    "@openzeppelin/contracts/token/ERC20/extensions/ERC20Permit.sol";
import { Address } from "@openzeppelin/contracts/utils/Address.sol";

contract VaultZapper is Ownable2Step, Pausable {
    /**
     * @dev The `SafeERC20` lib is only used for `safeTransfer`,
     * `safeTransferFrom` and `forceApprove` operations.
     */
    using SafeERC20 for IERC20;

    /**
     * @dev The `Address` lib is only used for `sendValue` operations.
     */
    using Address for address payable;

    /**
     * @notice The `authorizedVaults` mapping is used to check if a vault is
     * authorized to interact with the `VaultZapper` contract.
     */
    mapping(IERC4626 vault => bool isAuthorized) public authorizedVaults;

    /**
     * @notice The `authorizedRouters` mapping is used to check if a router is
     * authorized to interact with the `VaultZapper` contract.
     */
    mapping(address routerAddress => bool isAuthorized) public authorizedRouters;

    /**
     * @dev The `ZapAndDeposit` event is emitted when a user zaps in and
     * deposits
     * assets into a vault.
     */
    event ZapAndRequestDeposit(
        IERC7540 indexed vault,
        address indexed router,
        IERC20 tokenIn,
        uint256 amount
    );

    /**
     * @dev The `ZapAndDeposit` event is emitted when a user zaps in and
     * deposits
     * assets into a vault.
     */
    event ZapAndDeposit(
        IERC4626 indexed vault,
        address indexed router,
        IERC20 tokenIn,
        uint256 amount,
        uint256 shares
    );

    /**
     * @dev The `RouterApproved` event is emitted when a router is approved to
     * interact with a token.
     */
    event RouterApproved(address indexed router, IERC20 indexed token);
    /**
     * @dev The `RouterAuthorized` event is emitted when a router is authorized
     * to interact with the `VaultZapper` contract.
     */
    event RouterAuthorized(address indexed router, bool allowed);
    /**
     * @dev The `VaultAuthorized` event is emitted when a vault is authorized to
     * interact with the `VaultZapper` contract.
     */
    event VaultAuthorized(IERC4626 indexed vault, bool allowed);

    /**
     * @dev The `NotRouter` error is emitted when a router is not authorized to
     * interact with the `VaultZapper` contract.
     */
    error NotRouter(address router);
    /**
     * @dev The `NotVault` error is emitted when a vault is not authorized to
     * interact with the `VaultZapper` contract.
     */
    error NotVault(IERC4626 vault);
    /**
     * @dev The `SwapFailed` error is emitted when a swap fails.
     */
    error SwapFailed(string reason);
    /**
     * @dev The `InconsistantSwapData` error is emitted when the swap data is
     * inconsistant.
     */
    error InconsistantSwapData(
        uint256 expectedTokenInBalance, uint256 actualTokenInBalance
    );
    /**
     * @dev The `NotEnoughSharesMinted` error is emitted when the amount of
     * shares
     * minted is not enough.
     */
    error NotEnoughSharesMinted(uint256 sharesMinted, uint256 minSharesMinted);
    /**
     * @dev The `NotEnoughUnderlying` error is emitted when the amount of
     * underlying assets is not enough.
     */
    error NotEnoughUnderlying(
        uint256 previewedUnderlying, uint256 withdrawedUnderlying
    );

    /**
     * @dev The `NullMinShares` error is emitted when the minimum amount of
     * shares
     * to mint is null.
     */
    error NullMinShares();

    /**
     * @dev See
     * https://dedaub.com/blog/phantom-functions-and-the-billion-dollar-no-op
     */
    error PermitFailed();

    /**
     * @dev The `onlyAllowedRouter` modifier is used to check if a router is
     * authorized to interact with the `VaultZapper` contract.
     */
    modifier onlyAllowedRouter(address router) {
        if (!authorizedRouters[router]) revert NotRouter(router);
        _;
    }

    /**
     * @dev The `onlyAllowedVault` modifier is used to check if a vault is
     * authorized to interact with the `VaultZapper` contract.
     */
    modifier onlyAllowedVault(IERC4626 vault) {
        if (!authorizedVaults[vault]) revert NotVault(vault);
        _;
    }

    constructor() Ownable(_msgSender()) { }

    /**
     * @dev The `withdrawToken` function is used to withdraw tokens from the
     * `VaultZapper` contract.
     */
    function withdrawToken(IERC20 token) external onlyOwner {
        token.safeTransfer(_msgSender(), token.balanceOf(address(this)));
    }

    /**
     * @dev The `withdrawNativeToken` function is used to withdraw native tokens
     * from the `VaultZapper` contract.
     */
    function withdrawNativeToken() external onlyOwner {
        payable(_msgSender()).sendValue(address(this).balance);
    }

    /**
     * @dev The `pause` function is used to pause the `VaultZapper` contract.
     */
    function pause() external onlyOwner {
        _pause();
    }

    /**
     * @dev The `unpause` function is used to unpause the `VaultZapper`
     * contract.
     */
    function unpause() external onlyOwner {
        _unpause();
    }

    /**
     * @dev The `approveTokenForRouter` function is used to approve a token for
     * a
     * router.
     */
    function approveTokenForRouter(
        IERC20 token,
        address router
    )
        public
        onlyOwner
        onlyAllowedRouter(router)
    {
        token.forceApprove(router, type(uint256).max);
        emit RouterApproved(router, token);
    }

    /**
     * @dev The `toggleRouterAuthorization` function is used to toggle the
     * authorization of a router.
     */
    function toggleRouterAuthorization(address router) public onlyOwner {
        bool authorized = !authorizedRouters[router];
        authorizedRouters[router] = authorized;
        emit RouterAuthorized(router, authorized);
    }

    /**
     * @dev The `toggleVaultAuthorization` function is used to toggle the
     * authorization of a vault.
     */
    function toggleVaultAuthorization(IERC7540 vault) public onlyOwner {
        bool authorized = !authorizedVaults[vault];
        IERC20(vault.asset()).forceApprove(
            address(vault), authorized ? type(uint256).max : 0
        );
        authorizedVaults[vault] = authorized;
        emit VaultAuthorized(vault, authorized);
    }

    /**
     * @dev The `_zapIn` function is used to zap in assets into a vault.
     */
    function _zapIn(
        IERC20 tokenIn,
        address router,
        uint256 amount,
        bytes calldata data
    )
        internal
    {
        require(data.length > 0, "empty call data for zapin");
        uint256 expectedBalance; // of tokenIn (currently)

        if (msg.value == 0) {
            expectedBalance = tokenIn.balanceOf(address(this));
            _transferTokenInAndApprove(router, tokenIn, amount);
        } else {
            expectedBalance = address(this).balance - msg.value;
        }

        _executeZap(router, data); // zap

        uint256 balanceAfterZap = msg.value == 0
            ? tokenIn.balanceOf(address(this))
            : address(this).balance;

        if (balanceAfterZap > expectedBalance) {
            // Our balance is higher than expected, we shouldn't have received
            // any token
            revert InconsistantSwapData({
                expectedTokenInBalance: expectedBalance,
                actualTokenInBalance: balanceAfterZap
            });
        }
    }

    /**
     * @dev The `_transferTokenInAndApprove` function is used to transfer tokens
     * into the `VaultZapper` contract and approve them for a router.
     */
    function _transferTokenInAndApprove(
        address router,
        IERC20 tokenIn,
        uint256 amount
    )
        internal
    {
        tokenIn.safeTransferFrom(_msgSender(), address(this), amount);
        if (tokenIn.allowance(address(this), router) < amount) {
            tokenIn.forceApprove(router, amount);
        }
    }

    /*
     ########################
      USER RELATED FUNCTIONS
     ########################
    */

    /**
     * @dev The `zapAndDeposit` function is used to zap in and deposit assets
     * into a vault.
     */
    function zapAndDeposit(
        IERC20 tokenIn,
        IERC4626 vault,
        address router,
        uint256 amount,
        bytes calldata data
    )
        public
        payable
        onlyAllowedRouter(router)
        onlyAllowedVault(vault)
        whenNotPaused
        returns (uint256)
    {
        uint256 initialTokenOutBalance =
            IERC20(vault.asset()).balanceOf(address(this)); // tokenOut balance to
            // deposit, not final value

        // Zap
        _zapIn(tokenIn, router, amount, data);


        uint256 assets = IERC20(vault.asset()).balanceOf(address(this))
                - initialTokenOutBalance;

        require(assets > 0, "zap generated 0 assets");

        // Deposit
        uint256 shares = vault.deposit(
            assets,
            _msgSender()
        );

        emit ZapAndDeposit({
            vault: vault,
            router: router,
            tokenIn: tokenIn,
            amount: amount,
            shares: shares
        });

        return shares;
    }

    /**
     * @dev The `zapAndRequestDeposit` function is used to zap in and request a
     * deposit of assets into a vault.
     */
    function zapAndRequestDeposit(
        IERC20 tokenIn,
        IERC7540 vault,
        address router,
        uint256 amountIn,
        bytes calldata swapData,
        bytes calldata callback7540Data
    )
        public
        payable
        onlyAllowedRouter(router)
        onlyAllowedVault(vault)
        whenNotPaused
    {
        uint256 initialTokenOutBalance =
            IERC20(vault.asset()).balanceOf(address(this)); // tokenOut balance to
            // deposit, not final value

        // Zap
        _zapIn(tokenIn, router, amountIn, swapData);

        uint256 assets = IERC20(vault.asset()).balanceOf(address(this))
                - initialTokenOutBalance;

        require(assets > 0, "zap generated 0 assets");

        // Request deposit
        vault.requestDeposit(
            assets,
            _msgSender(),
            address(this),
            callback7540Data
        );

        emit ZapAndRequestDeposit({
            vault: vault,
            router: router,
            tokenIn: tokenIn,
            amount: amountIn
        });
    }

    /*
     ##########################
      PERMIT RELATED FUNCTIONS
     ##########################
    */

    /**
     * @dev The `zapAndDepositWithPermit` function is used to zap in and deposit
     * assets into a vault with a permit.
     */
    function zapAndDepositWithPermit(
        IERC20 tokenIn,
        IERC4626 vault,
        address router,
        uint256 amount,
        bytes calldata swapData,
        PermitParams calldata permitParams
    )
        public
        returns (uint256)
    {
        if (tokenIn.allowance(_msgSender(), address(this)) < amount) {
            _execPermit(tokenIn, _msgSender(), address(this), permitParams);
        }
        return zapAndDeposit(tokenIn, vault, router, amount, swapData);
    }

    /**
     * @dev The `zapAndRequestDepositWithPermit` function is used to zap in and
     * request a deposit of assets into a vault with a permit.
     */
    function zapAndRequestDepositWithPermit(
        IERC20 tokenIn,
        IERC7540 vault,
        address router,
        uint256 amount,
        bytes calldata swapData,
        PermitParams calldata permitParams,
        bytes calldata callback7540Data
    )
        public
    {
        if (tokenIn.allowance(_msgSender(), address(this)) < amount) {
            _execPermit(tokenIn, _msgSender(), address(this), permitParams);
        }
        zapAndRequestDeposit(
            tokenIn, vault, router, amount, swapData, callback7540Data
        );
    }

    /**
     * @dev The `_executeZap` function is used to execute a zap.
     */
    function _executeZap(
        address target,
        bytes memory data
    )
        internal
        returns (bytes memory response)
    {
        (bool success, bytes memory _data) =
            target.call{ value: msg.value }(data);
        if (!success) {
            if (data.length > 0) revert SwapFailed(string(_data));
            else revert SwapFailed("Unknown reason");
        }
        return _data;
    }

    /**
     * @dev The `_executePermit` function is used to execute a permit.
     */
    function _execPermit(
        IERC20 token,
        address owner,
        address spender,
        PermitParams calldata permitParams
    )
        internal
    {
        ERC20Permit(address(token)).permit(
            owner,
            spender,
            permitParams.value,
            permitParams.deadline,
            permitParams.v,
            permitParams.r,
            permitParams.s
        );
        if (token.allowance(owner, spender) != permitParams.value) {
            revert PermitFailed();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable2Step.sol)

pragma solidity ^0.8.20;

import {Ownable} from "./Ownable.sol";

/**
 * @dev Contract module which provides access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is specified at deployment time in the constructor for `Ownable`. This
 * can later be changed with {transferOwnership} and {acceptOwnership}.
 *
 * This module is used through inheritance. It will make available all functions
 * from parent (Ownable).
 */
abstract contract Ownable2Step is Ownable {
    address private _pendingOwner;

    event OwnershipTransferStarted(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Returns the address of the pending owner.
     */
    function pendingOwner() public view virtual returns (address) {
        return _pendingOwner;
    }

    /**
     * @dev Starts the ownership transfer of the contract to a new account. Replaces the pending transfer if there is one.
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual override onlyOwner {
        _pendingOwner = newOwner;
        emit OwnershipTransferStarted(owner(), newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`) and deletes any pending owner.
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual override {
        delete _pendingOwner;
        super._transferOwnership(newOwner);
    }

    /**
     * @dev The new owner accepts the ownership transfer.
     */
    function acceptOwnership() public virtual {
        address sender = _msgSender();
        if (pendingOwner() != sender) {
            revert OwnableUnauthorizedAccount(sender);
        }
        _transferOwnership(sender);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Pausable.sol)

pragma solidity ^0.8.20;

import {Context} from "../utils/Context.sol";

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
    bool private _paused;

    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    /**
     * @dev The operation failed because the contract is paused.
     */
    error EnforcedPause();

    /**
     * @dev The operation failed because the contract is not paused.
     */
    error ExpectedPause();

    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor() {
        _paused = false;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        _requireNotPaused();
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        _requirePaused();
        _;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Throws if the contract is paused.
     */
    function _requireNotPaused() internal view virtual {
        if (paused()) {
            revert EnforcedPause();
        }
    }

    /**
     * @dev Throws if the contract is not paused.
     */
    function _requirePaused() internal view virtual {
        if (!paused()) {
            revert ExpectedPause();
        }
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "./IERC20.sol";
import {IERC20Metadata} from "./extensions/IERC20Metadata.sol";
import {Context} from "../../utils/Context.sol";
import {IERC20Errors} from "../../interfaces/draft-IERC6093.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 */
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
    mapping(address account => uint256) private _balances;

    mapping(address account => mapping(address spender => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            _totalSupply += value;
        } else {
            uint256 fromBalance = _balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                _balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                _totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                _balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     * ```
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        _allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity 0.8.21;

import { IERC4626 } from "@openzeppelin/contracts/interfaces/IERC4626.sol";

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP
     * section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId)
        external
        view
        returns (bool);
}

interface IERC7540Deposit {
    event DepositRequest(
        address indexed receiver,
        address indexed owner,
        uint256 indexed requestId,
        address sender,
        uint256 assets
    );

    /**
     * @dev Transfers assets from msg.sender into the Vault and submits a
     * Request for asynchronous deposit/mint.
     *
     * - MUST support ERC-20 approve / transferFrom on asset as a deposit
     * Request flow.
     * - MUST revert if all of assets cannot be requested for deposit/mint.
     *
     * NOTE: most implementations will require pre-approval of the Vault with
     * the Vault's underlying asset token.
     */
    function requestDeposit(
        uint256 assets,
        address receiver,
        address owner,
        bytes memory data
    )
        external;

    /**
     * @dev Returns the amount of requested assets in Pending state for the
     * operator to deposit or mint.
     *
     * - MUST NOT include any assets in Claimable state for deposit or mint.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT revert unless due to integer overflow caused by an
     * unreasonably large input.
     */
    function pendingDepositRequest(address owner)
        external
        view
        returns (uint256 assets);
}

interface IERC7540Redeem {
    event RedeemRequest(
        address indexed receiver,
        address indexed owner,
        uint256 indexed requestId,
        address sender,
        uint256 shares
    );

    /**
     * @dev Assumes control of shares from owner and submits a Request for
     * asynchronous redeem/withdraw.
     *
     * - MUST support a redeem Request flow where the control of shares is taken
     * from owner directly
     *   where msg.sender has ERC-20 approval over the shares of owner.
     * - MUST revert if all of shares cannot be requested for redeem / withdraw.
     */
    function requestRedeem(
        uint256 shares,
        address operator,
        address owner,
        bytes memory data
    )
        external;

    /**
     * @dev Returns the amount of requested shares in Pending state for the
     * operator to redeem or withdraw.
     *
     * - MUST NOT include any shares in Claimable state for redeem or withdraw.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT revert unless due to integer overflow caused by an
     * unreasonably large input.
     */
    function pendingRedeemRequest(address owner)
        external
        view
        returns (uint256 shares);
}

/**
 * @title  IERC7540
 * @dev    Interface of the ERC7540 "Asynchronous Tokenized Vault Standard", as
 * defined in
 *         https://github.com/ethereum/EIPs/blob/2e63f2096b0c7d8388458bb0a03a7ce0eb3422a4/EIPS/eip-7540.md[ERC-7540].
 */
interface IERC7540 is IERC7540Deposit, IERC7540Redeem, IERC4626, IERC165 { }

//SPDX-License-Identifier: MIT
pragma solidity 0.8.21;

import {
    IERC7540,
    IERC165,
    IERC7540Redeem,
    IERC7540Deposit
} from "./interfaces/IERC7540.sol";
import { ERC7540Receiver } from "./interfaces/ERC7540Receiver.sol";
import { IERC20, SafeERC20, Math, PermitParams } from "./SyncVault.sol";

import { SyncVault } from "./SyncVault.sol";

/**
 *         @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@%=::::::=%@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@*=#=--=*=*@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@:*=    =#:@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@:@@    @@:@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@:@@    @@:@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@:@@    @@:@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@*-.    .-*@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@*        *@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@.         .@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@*  Amphor  *@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@*==========#@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@+==========*@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@*   Async   *@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@%  Vault  %@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@=        +@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@%       %@@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@@=      =@@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@@%     .@@@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@@@=    =@@@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@@@%----%@@@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@%+:::::+%@@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@@########@@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
 *
 *            d8888                        888
 *           d88888                        888
 *          d88P888                        888
 *         d88P 888 88888b.d88b.  88888b.  88888b.   .d88b.  888d888
 *        d88P  888 888 "888 "88b 888 "88b 888 "88b d88""88b 888P"
 *       d88P   888 888  888  888 888  888 888  888 888  888 888
 *      d8888888888 888  888  888 888 d88P 888  888 Y88..88P 888
 *     d88P     888 888  888  888 88888P"  888  888  "Y88P"  888.io
 *                                888
 *                                888
 *                                888
 */

/**
 * @dev This constant is used to divide the fees by 10_000 to get the percentage
 * of the fees.
 */
uint256 constant BPS_DIVIDER = 10_000;

/*
 * ########
 * # LIBS #
 * ########
*/
using Math for uint256; // only used for `mulDiv` operations.
using SafeERC20 for IERC20; // `safeTransfer` and `safeTransferFrom`

/**
 * @title AsyncVault
 * @dev This structure contains all the informations needed to let user claim
 * their request after we processed those. To avoid rounding errors we store the
 * totalSupply and totalAssets at the time of the deposit/redeem for the deposit
 * and the redeem. We also store the amount of assets and shares given by the
 * user.
 */
struct EpochData {
    uint256 totalSupplySnapshot;
    uint256 totalAssetsSnapshot;
    mapping(address => uint256) depositRequestBalance;
    mapping(address => uint256) redeemRequestBalance;
}

/**
 * @title SettleValues
 * @dev Hold the required values to settle the vault deposit and
 * redeem requests.
 */
struct SettleValues {
    uint256 lastSavedBalance;
    uint256 fees;
    uint256 pendingRedeem;
    uint256 sharesToMint;
    uint256 pendingDeposit;
    uint256 assetsToWithdraw;
    uint256 totalAssetsSnapshot;
    uint256 totalSupplySnapshot;
}

/**
 * @title Silo
 * @dev This contract is used to hold the assets/shares of the users that
 * requested a deposit/redeem. It is used to simplify the logic of the vault.
 */
contract Silo {
    constructor(IERC20 underlying) {
        underlying.forceApprove(msg.sender, type(uint256).max);
    }
}

contract AsyncVault is IERC7540, SyncVault {
    /*
     * ####################################
     * # AMPHOR SYNTHETIC RELATED STORAGE #
     * ####################################
    */

    /**
     * @notice The epochId is used to keep track of the deposit and redeem
     * requests. It is incremented every time the owner calls the `settle`
     * function.
     */
    uint256 public epochId;
    /**
     * @notice The treasury is used to store the address of the treasury.
     * The treasury is used to store the fees taken from the vault.
     * The treasury can be the owner of the contract or a specific address.
     * The treasury can be changed by the owner of the contract.
     * The treasury can be used to store the fees taken from the vault.
     * The treasury can be the owner of the contract or a specific address.
     */
    address public treasury;
    /**
     * @notice The lastSavedBalance is used to keep track of the assets in the
     * vault at the time of the last `settle` call.
     */
    Silo public pendingSilo;
    /**
     * @notice The claimableSilo is used to hold the assets/shares of the users
     * that requested a deposit/redeem.
     */
    Silo public claimableSilo;
    /**
     * @notice The epochs mapping is used to store the informations needed to
     * let user claim their request after we processed those. To avoid rounding
     * errors we store the totalSupply and totalAssets at the time of the
     * deposit/redeem for the deposit and the redeem. We also store the amount
     * of assets and shares given by the user.
     */
    mapping(uint256 epochId => EpochData epoch) public epochs;
    /**
     * @notice The lastDepositRequestId is used to keep track of the last
     * deposit
     * request made by the user. It is used to let the user claim their request
     * after we processed those.
     */
    mapping(address user => uint256 epochId) public lastDepositRequestId;
    /**
     * @notice The lastRedeemRequestId is used to keep track of the last redeem
     * request made by the user. It is used to let the user claim their request
     * after we processed those.
     */
    mapping(address user => uint256 epochId) public lastRedeemRequestId;

    /*
     * ##########
     * # EVENTS #
     * ##########
    */

    /**
     * @notice This event is emitted when a user request a deposit.
     * @param requestId The id of the request.
     * @param owner The address of the user that requested the deposit.
     * @param previousRequestedAssets The amount of assets requested by the user
     * before the new request.
     * @param newRequestedAssets The amount of assets requested by the user.
     */
    event DecreaseDepositRequest(
        uint256 indexed requestId,
        address indexed owner,
        uint256 indexed previousRequestedAssets,
        uint256 newRequestedAssets
    );

    /**
     * @notice This event is emitted when a user request a redeem.
     * @param requestId The id of the request.
     * @param owner The address of the user that requested the redeem.
     * @param previousRequestedShares The amount of shares requested by the user
     * before the new request.
     * @param newRequestedShares The amount of shares requested by the user.
     */
    event DecreaseRedeemRequest(
        uint256 indexed requestId,
        address indexed owner,
        uint256 indexed previousRequestedShares,
        uint256 newRequestedShares
    );

    /**
     * @notice This event is emitted when a user request a redeem.
     * @param requestId The id of the request.
     * @param owner The address of the user that requested the redeem.
     * @param receiver The amount of shares requested by the user
     * before the new request.
     * @param assets The amount of shares requested by the user.
     * @param shares The amount of shares requested by the user.
     */
    event ClaimDeposit(
        uint256 indexed requestId,
        address indexed owner,
        address indexed receiver,
        uint256 assets,
        uint256 shares
    );

    /**
     * @notice This event is emitted when a user request a redeem.
     * @param requestId The id of the request.
     * @param owner The address of the user that requested the redeem.
     * @param receiver The amount of shares requested by the user
     * before the new request.
     * @param assets The amount of shares requested by the user.
     * @param shares The amount of shares requested by the user.
     */
    event ClaimRedeem(
        uint256 indexed requestId,
        address indexed owner,
        address indexed receiver,
        uint256 assets,
        uint256 shares
    );

    /*
     * ##########
     * # ERRORS #
     * ##########
     */

    /**
     * @notice This error is emitted when the user request more shares than the
     * maximum allowed.
     * @param receiver The address of the user that requested the redeem.
     * @param shares The amount of shares requested by the user.
     */
    error ExceededMaxRedeemRequest(
        address receiver, uint256 shares, uint256 maxShares
    );

    /**
     * @notice This error is emitted when the user request more assets than the
     * maximum allowed.
     * @param receiver The address of the user that requested the deposit.
     * @param assets The amount of assets requested by the user.
     * @param maxDeposit The maximum amount of assets the user can request.
     */
    error ExceededMaxDepositRequest(
        address receiver, uint256 assets, uint256 maxDeposit
    );

    /**
     * @notice This error is emitted when the user try to make a new request
     * with an incorrect data.
     */
    error ReceiverFailed();
    /**
     * @notice This error is emitted when the user try to make a new request
     * on behalf of someone else.
     */
    error ERC7540CantRequestDepositOnBehalfOf();
    /**
     * @notice This error is emitted when the user try to make a request
     * when there is no claimable request available.
     */
    error NoClaimAvailable(address owner);
    /**
     * @notice This error is emitted when the user try to make a request
     * when the vault is open.
     */
    error InvalidTreasury();

    /*
     * ##############################
     * # AMPHOR SYNTHETIC FUNCTIONS #
     * ##############################
     */

    /// @custom:oz-upgrades-unsafe-allow constructor
    constructor() SyncVault() {
        _disableInitializers();
    }

    function initialize(
        uint16 fees,
        address owner,
        address _treasury,
        IERC20 underlying,
        uint256 bootstrapAmount,
        string memory name,
        string memory symbol
    )
        public
        initializer
    {
        super.initialize(fees, owner, underlying, bootstrapAmount, name, symbol);
        epochId = 1;
        setTreasury(_treasury);
        pendingSilo = new Silo(underlying);
        claimableSilo = new Silo(underlying);
    }

    /**
     * @dev This function is used to decrease the amount of assets requested to
     * deposit by the user. It can only be called by the user who made the
     * request.
     * @param assets The amount of assets requested by the user.
     */
    function decreaseDepositRequest(uint256 assets)
        external
        whenClosed
        whenNotPaused
    {
        address owner = _msgSender();
        uint256 oldBalance = epochs[epochId].depositRequestBalance[owner];
        epochs[epochId].depositRequestBalance[owner] -= assets;
        _asset.safeTransferFrom(address(pendingSilo), owner, assets);

        emit DecreaseDepositRequest(
            epochId,
            owner,
            oldBalance,
            epochs[epochId].depositRequestBalance[owner]
        );
    }

    /**
     * @dev This function is used to decrease the amount of shares requested to
     * redeem by the user. It can only be called by the user who made the
     * request.
     * @param shares The amount of shares requested by the user.
     */
    function decreaseRedeemRequest(uint256 shares)
        external
        whenClosed
        whenNotPaused
    {
        address owner = _msgSender();
        uint256 oldBalance = epochs[epochId].redeemRequestBalance[owner];
        epochs[epochId].redeemRequestBalance[owner] -= shares;
        _update(address(pendingSilo), owner, shares);

        emit DecreaseRedeemRequest(
            epochId,
            owner,
            oldBalance,
            epochs[epochId].redeemRequestBalance[owner]
        );
    }

    /*
     * ######################################
     * # AMPHOR SYNTHETIC RELATED FUNCTIONS #
     * ######################################
    */

    /**
     * @dev The `setTreasury` function is used to set the treasury address.
     * It can only be called by the owner of the contract (`onlyOwner`
     * modifier).
     * @param _treasury The address of the treasury.
     */
    function setTreasury(address _treasury) public onlyOwner {
        if (_treasury == address(0)) revert InvalidTreasury();
        treasury = _treasury;
    }

    /**
     * @dev The `close` function is used to close the vault.
     * It can only be called by the owner of the contract (`onlyOwner`
     * modifier).
     */
    function close() external override onlyOwner {
        if (!vaultIsOpen) revert VaultIsClosed();

        if (totalAssets() == 0) revert VaultIsEmpty();

        lastSavedBalance = totalAssets();
        vaultIsOpen = false;
        _asset.safeTransfer(owner(), lastSavedBalance);
        emit EpochStart(block.timestamp, lastSavedBalance, totalSupply());
    }

    /**
     * @dev The `open` function is used to open the vault.
     * @notice The `open` function is used to end the lock period of the vault.
     * It can only be called by the owner of the contract (`onlyOwner` modifier)
     * and only when the vault is locked.
     * If there are profits, the performance fees are taken and sent to the
     * owner of the contract.
     * @param assetReturned The underlying assets amount to be deposited into
     * the vault.
     */
    function open(uint256 assetReturned)
        external
        override
        onlyOwner
        whenNotPaused
        whenClosed
    {
        (uint256 newBalance,) = _settle(assetReturned);
        vaultIsOpen = true;
        _asset.safeTransferFrom(owner(), address(this), newBalance);
    }

    /*
     * #################################
     * #   Permit RELATED FUNCTIONS    #
     * #################################
    */

    /**
     * @dev The `settle` function is used to settle the vault.
     * @notice The `settle` function is used to settle the vault. It can only be
     * called by the owner of the contract (`onlyOwner` modifier).
     * If there are profits, the performance fees are taken and sent to the
     * owner of the contract.
     * Since amphor strategies can be time sensitive, we must be able to switch
     * epoch without needing to put all the funds back.
     * Using _settle we can virtually put back the funds, check how much we owe
     * to users that want to redeem and maybe take the extra funds from the
     * deposit requests.
     * @param newSavedBalance The underlying assets amount to be deposited into
     * the vault.
     */
    function settle(uint256 newSavedBalance)
        external
        onlyOwner
        whenNotPaused
        whenClosed
    {
        (uint256 _lastSavedBalance, uint256 totalSupply) =
            _settle(newSavedBalance);
        emit EpochStart(block.timestamp, _lastSavedBalance, totalSupply);
    }

    /**
     * @dev pendingRedeemRequest is used to know how many shares are currently
     * waiting to be redeemed for the user.
     * @param owner The address of the user that requested the redeem.
     */
    function pendingRedeemRequest(address owner)
        external
        view
        returns (uint256)
    {
        return epochs[epochId].redeemRequestBalance[owner];
    }

    /**
     * @dev How many shares are  virtually waiting for the user to be redeemed
     * via the `claimRedeem` function.
     * @param owner The address of the user that requested the redeem.
     */
    function claimableRedeemRequest(address owner)
        external
        view
        returns (uint256)
    {
        uint256 lastRequestId = lastRedeemRequestId[owner];
        return isCurrentEpoch(lastRequestId)
            ? 0
            : epochs[lastRequestId].redeemRequestBalance[owner];
    }

    /**
     * @dev How many assets are currently waiting to be deposited for the user.
     * @param owner The address of the user that requested the deposit.
     */
    function pendingDepositRequest(address owner)
        external
        view
        returns (uint256 assets)
    {
        return epochs[epochId].depositRequestBalance[owner];
    }

    /**
     * @dev How many assets are virtually waiting for the user to be deposit
     * via the `claimDeposit` function.
     * @param owner The address of the user that requested the deposit.
     */
    function claimableDepositRequest(address owner)
        external
        view
        returns (uint256 assets)
    {
        uint256 lastRequestId = lastDepositRequestId[owner];
        return isCurrentEpoch(lastRequestId)
            ? 0
            : epochs[lastRequestId].depositRequestBalance[owner];
    }

    /**
     * @dev How many assets are currently waiting to be deposited for all users.
     * @return The amount of assets waiting to be deposited.
     */
    function totalPendingDeposits() external view returns (uint256) {
        return vaultIsOpen ? 0 : _asset.balanceOf(address(pendingSilo));
    }

    /**
     * @dev How many shares are  waiting to be redeemed for all users.
     * @return The amount of shares waiting to be redeemed.
     */
    function totalPendingRedeems() external view returns (uint256) {
        return vaultIsOpen ? 0 : balanceOf(address(pendingSilo));
    }

    /**
     * @dev How many shares are  virtually waiting for the user to be redeemed
     * via the `claimRedeem` function.
     * @return The amount of shares waiting to be redeemed.
     */
    function totalClaimableShares() external view returns (uint256) {
        return balanceOf(address(claimableSilo));
    }

    /**
     * @dev How many assets are virtually waiting for the user to be deposit
     * via the `claimDeposit` function.
     * @return The amount of assets waiting to be deposited.
     */
    function totalClaimableAssets() external view returns (uint256) {
        return _asset.balanceOf(address(claimableSilo));
    }

    /**
     * @dev when the vault is closed, users can only request to deposit.
     * By doing this funds will be sent and wait in the pendingSilo.
     * When the owner will call the `open` or `settle` function, the funds will
     * be deposited and the minted shares will be sent to the claimableSilo.
     * Waiting for the users to claim them.
     * @param assets The amount of assets requested by the user.
     * @param receiver The address of the user that requested the deposit.
     * @param owner The address of the user that requested the deposit.
     * @param data The data to be sent to the receiver.
     */
    function requestDeposit(
        uint256 assets,
        address receiver,
        address owner,
        bytes memory data
    )
        public
        whenNotPaused
        whenClosed
    {
        // vault
        if (_msgSender() != owner) {
            revert ERC7540CantRequestDepositOnBehalfOf();
        }
        if (previewClaimDeposit(receiver) > 0) {
            _claimDeposit(receiver, receiver);
        }

        if (assets > maxDepositRequest(owner)) {
            revert ExceededMaxDepositRequest(
                receiver, assets, maxDepositRequest(owner)
            );
        }

        _asset.safeTransferFrom(owner, address(pendingSilo), assets);

        _createDepositRequest(assets, receiver, owner, data);
    }

    /**
     * @dev when the vault is closed, users can only request to redeem.
     * By doing this shares will be sent and wait in the pendingSilo.
     * When the owner will call the `open` or `settle` function, the shares will
     * be redeemed and the assets will be sent to the claimableSilo. Waiting for
     * the users to claim them.
     * @param shares The amount of shares requested by the user.
     * @param receiver The address of the user that requested the redeem.
     * @param owner The address of the user that requested the redeem.
     * @param data The data to be sent to the receiver.
     */
    function requestRedeem(
        uint256 shares,
        address receiver,
        address owner,
        bytes memory data
    )
        public
        whenNotPaused
        whenClosed
    {
        if (_msgSender() != owner) {
            _spendAllowance(owner, _msgSender(), shares);
        }
        if (previewClaimRedeem(receiver) > 0) {
            _claimRedeem(receiver, receiver);
        }
        if (shares > maxRedeemRequest(owner)) {
            revert ExceededMaxRedeemRequest(
                receiver, shares, maxRedeemRequest(owner)
            );
        }

        _update(owner, address(pendingSilo), shares);
        // Create a new request
        _createRedeemRequest(shares, receiver, owner, data);
    }

    /**
     * @dev This function let users claim the shares we owe them after we
     * processed their deposit request, in the _settle function.
     * @param receiver The address of the user that requested the deposit.
     */
    function claimDeposit(address receiver)
        public
        whenNotPaused
        returns (uint256 shares)
    {
        return _claimDeposit(_msgSender(), receiver);
    }

    /**
     * @dev This function let users claim the assets we owe them after we
     * processed their redeem request, in the _settle function.
     * @param receiver The address of the user that requested the redeem.
     */
    function claimRedeem(address receiver)
        public
        whenNotPaused
        returns (uint256 assets)
    {
        return _claimRedeem(_msgSender(), receiver);
    }

    /**
     * @dev This funciton let user request a deposit using permit signatures.
     * @param assets The amount of assets requested by the user.
     * @param receiver The address of the user that requested the deposit.
     * @param data The data to be sent to the receiver.
     * @param permitParams The permit signature.
     */
    function requestDepositWithPermit(
        uint256 assets,
        address receiver,
        bytes memory data,
        PermitParams calldata permitParams
    )
        public
    {
        address _msgSender = _msgSender();
        if (_asset.allowance(_msgSender, address(this)) < assets) {
            execPermit(_msgSender, address(this), permitParams);
        }
        return requestDeposit(assets, receiver, _msgSender, data);
    }

    /**
     * @dev users can request deposit only when the vault is closed and not
     * paused.
     * @return The maximum amount of assets the user can request.
     */
    function maxDepositRequest(address) public view returns (uint256) {
        return vaultIsOpen || paused() ? 0 : type(uint256).max;
    }

    /**
     * @dev users can request redeem only when the vault is closed and not
     * paused.
     * @param owner The address of the user that requested the redeem.
     * @return The maximum amount of shares the user can request.
     */
    function maxRedeemRequest(address owner) public view returns (uint256) {
        return vaultIsOpen || paused() ? 0 : balanceOf(owner);
    }

    /**
     * @dev This function let users preview how many shares they will get if
     * they claim their deposit request.
     * @param owner The address of the user that requested the deposit.
     * @return The amount of shares the user will get if they claim their
     * deposit request.
     * @notice This function let users preview how many shares they will get if
     * they claim their deposit request.
     */
    function previewClaimDeposit(address owner) public view returns (uint256) {
        uint256 lastRequestId = lastDepositRequestId[owner];
        uint256 assets = epochs[lastRequestId].depositRequestBalance[owner];
        return _convertToShares(assets, lastRequestId, Math.Rounding.Floor);
    }

    /**
     * @dev This function let users preview how many assets they will get if
     * they claim their redeem request.
     * @param owner The address of the user that requested the redeem.
     * @return The amount of assets the user will get if they claim their
     * redeem request.
     */
    function previewClaimRedeem(address owner) public view returns (uint256) {
        uint256 lastRequestId = lastRedeemRequestId[owner];
        uint256 shares = epochs[lastRequestId].redeemRequestBalance[owner];
        return _convertToAssets(shares, lastRequestId, Math.Rounding.Floor);
    }

    /**
     * @dev This function convertToShares is used to convert the assets into
     * shares.
     * @param assets The amount of assets to convert.
     * @param _epochId The epoch id.
     * @return The amount of shares.
     */
    function convertToShares(
        uint256 assets,
        uint256 _epochId
    )
        public
        view
        returns (uint256)
    {
        return _convertToShares(assets, _epochId, Math.Rounding.Floor);
    }

    /**
     * @dev This function convertToAssets is used to convert the shares into
     * assets.
     * @param shares The amount of shares to convert.
     * @param _epochId The epoch id.
     * @return The amount of assets.
     */
    function convertToAssets(
        uint256 shares,
        uint256 _epochId
    )
        public
        view
        returns (uint256)
    {
        return _convertToAssets(shares, _epochId, Math.Rounding.Floor);
    }

    /**
     * Utils function to convert the shares claimable into assets. It can
     * be used in the front end to save an rpc call.
     */
    /**
     * @dev This function claimableDepositBalanceInAsset is used to know if the
     * owner will have to send money to the claimableSilo (for users who want to
     * leave the vault) or if he will receive money from it.
     * @notice Using this the owner can know if he will have to send money to
     * the
     * claimableSilo (for users who want to leave the vault) or if he will
     * receive money from it.
     * @param owner The address of the user that requested the deposit.
     * @return The amount of assets the user will get if they claim their
     * deposit request.
     */
    function claimableDepositBalanceInAsset(address owner)
        public
        view
        returns (uint256)
    {
        uint256 shares = previewClaimDeposit(owner);
        return convertToAssets(shares);
    }

    /**
     * @dev This function claimableRedeemBalanceInAsset is used to know if the
     * owner will have to send money to the claimableSilo (for users who want to
     * leave the vault) or if he will receive money from it.
     * @param newSavedBalance The underlying assets amount to be deposited into
     * the vault.
     * @return assetsToOwner The amount of assets the
     * user will get if they claim their redeem request.
     * @return assetsToVault The amount of assets the user will get if
     * they claim their redeem request.
     * @return expectedAssetFromOwner The amount of assets that will be taken
     * from the owner.
     * @return settleValues The settle values.
     */
    function previewSettle(uint256 newSavedBalance)
        public
        view
        returns (
            uint256 assetsToOwner,
            uint256 assetsToVault,
            uint256 expectedAssetFromOwner,
            SettleValues memory settleValues
        )
    {
        uint256 _lastSavedBalance = lastSavedBalance;
        _checkMaxDrawdown(_lastSavedBalance, newSavedBalance);

        // calculate the fees between lastSavedBalance and newSavedBalance
        uint256 fees = _computeFees(_lastSavedBalance, newSavedBalance);
        uint256 totalSupply = totalSupply();

        // taking fees if positive yield
        _lastSavedBalance = newSavedBalance - fees;

        address pendingSiloAddr = address(pendingSilo);
        uint256 pendingRedeem = balanceOf(pendingSiloAddr);
        uint256 pendingDeposit = _asset.balanceOf(pendingSiloAddr);

        uint256 sharesToMint = pendingDeposit.mulDiv(
            totalSupply + 1, _lastSavedBalance + 1, Math.Rounding.Floor
        );

        uint256 totalAssetsSnapshot = _lastSavedBalance;
        uint256 totalSupplySnapshot = totalSupply;

        uint256 assetsToWithdraw = pendingRedeem.mulDiv(
            _lastSavedBalance + pendingDeposit + 1,
            totalSupply + sharesToMint + 1,
            Math.Rounding.Floor
        );

        settleValues = SettleValues({
            lastSavedBalance: _lastSavedBalance + fees,
            fees: fees,
            pendingRedeem: pendingRedeem,
            sharesToMint: sharesToMint,
            pendingDeposit: pendingDeposit,
            assetsToWithdraw: assetsToWithdraw,
            totalAssetsSnapshot: totalAssetsSnapshot,
            totalSupplySnapshot: totalSupplySnapshot
        });

        if (pendingDeposit > assetsToWithdraw) {
            assetsToOwner = pendingDeposit - assetsToWithdraw;
        } else if (pendingDeposit < assetsToWithdraw) {
            assetsToVault = assetsToWithdraw - pendingDeposit;
        }
        expectedAssetFromOwner = fees + assetsToVault;
    }

    /**
     * @dev see EIP
     * @param interfaceId The interface id to check for.
     * @return True if the contract implements the interface.
     */
    function supportsInterface(bytes4 interfaceId) public pure returns (bool) {
        return interfaceId == type(IERC165).interfaceId
            || interfaceId == type(IERC7540Redeem).interfaceId
            || interfaceId == type(IERC7540Deposit).interfaceId;
    }

    // transfer must happen before this function is called
    /**
     * @dev _createDepositRequest is used to update the balance of the user in
     * order to create the deposit request.
     * @param assets The amount of assets requested by the user.
     * @param receiver The address of the user that requested the deposit.
     * @param owner The address of the user that requested the deposit.
     */
    function _createDepositRequest(
        uint256 assets,
        address receiver,
        address owner,
        bytes memory data
    )
        internal
    {
        epochs[epochId].depositRequestBalance[receiver] += assets;
        if (lastDepositRequestId[receiver] != epochId) {
            lastDepositRequestId[receiver] = epochId;
        }

        if (
            data.length > 0
                && ERC7540Receiver(receiver).onERC7540DepositReceived(
                    _msgSender(), owner, epochId, assets, data
                ) != ERC7540Receiver.onERC7540DepositReceived.selector
        ) revert ReceiverFailed();

        emit DepositRequest(receiver, owner, epochId, _msgSender(), assets);
    }

    /**
     * @dev _createRedeemRequest is used to update the balance of the user in
     * order to create the redeem request.
     * @param shares The amount of shares requested by the user.
     * @param receiver The address of the user that requested the redeem.
     * @param owner The address of the user that requested the redeem.
     * @param data The data to be sent to the receiver.
     * @notice This function is used to update the balance of the user.
     */
    function _createRedeemRequest(
        uint256 shares,
        address receiver,
        address owner,
        bytes memory data
    )
        internal
    {
        epochs[epochId].redeemRequestBalance[receiver] += shares;
        if (lastRedeemRequestId[receiver] != epochId) {
            lastRedeemRequestId[receiver] = epochId;
        }

        if (
            data.length > 0
                && ERC7540Receiver(receiver).onERC7540RedeemReceived(
                    _msgSender(), owner, epochId, shares, data
                ) != ERC7540Receiver.onERC7540RedeemReceived.selector
        ) revert ReceiverFailed();

        emit RedeemRequest(receiver, owner, epochId, _msgSender(), shares);
    }

    /**
     * @dev _claimDeposit is used to claim the pending deposit.
     * @param owner The address of the user that requested the deposit.
     * @param receiver The address of the user that requested the deposit.
     * @return shares The amount of shares requested by the user.
     */
    function _claimDeposit(
        address owner,
        address receiver
    )
        internal
        returns (uint256 shares)
    {
        uint256 lastRequestId = lastDepositRequestId[owner];
        if (lastRequestId == epochId) revert NoClaimAvailable(owner);

        shares = previewClaimDeposit(owner);

        uint256 assets = epochs[lastRequestId].depositRequestBalance[owner];
        epochs[lastRequestId].depositRequestBalance[owner] = 0;
        _update(address(claimableSilo), receiver, shares);
        emit ClaimDeposit(lastRequestId, owner, receiver, assets, shares);
    }

    /**
     * @dev _claimRedeem is used to claim the pending redeem and request a new
     * one in one transaction.
     * @param owner The address of the user that requested the redeem.
     * @param receiver The address of the user that requested the redeem.
     * @return assets The amount of assets requested by the user.
     */
    function _claimRedeem(
        address owner,
        address receiver
    )
        internal
        whenNotPaused
        returns (uint256 assets)
    {
        uint256 lastRequestId = lastRedeemRequestId[owner];
        if (lastRequestId == epochId) revert NoClaimAvailable(owner);

        assets = previewClaimRedeem(owner);

        uint256 shares = epochs[lastRequestId].redeemRequestBalance[owner];
        epochs[lastRequestId].redeemRequestBalance[owner] = 0;
        _asset.safeTransferFrom(address(claimableSilo), receiver, assets);
        emit ClaimRedeem(lastRequestId, owner, receiver, assets, shares);
    }

    /**
     * @dev _settle is used to settle the vault.
     * @param newSavedBalance The underlying assets amount to be deposited into
     * the vault.
     * @return lastSavedBalance The last saved balance.
     * @return totalSupply The total supply.
     */
    function _settle(uint256 newSavedBalance)
        internal
        returns (uint256, uint256)
    {
        (
            uint256 assetsToOwner,
            uint256 assetsToVault,
            ,
            SettleValues memory settleValues
        ) = previewSettle(newSavedBalance);

        emit EpochEnd(
            block.timestamp,
            lastSavedBalance,
            newSavedBalance,
            settleValues.fees,
            totalSupply()
        );

        _asset.safeTransferFrom(owner(), treasury, settleValues.fees);

        // Settle the shares balance
        _burn(address(pendingSilo), settleValues.pendingRedeem);
        _mint(address(claimableSilo), settleValues.sharesToMint);

        ///////////////////////////
        // Settle assets balance //
        ///////////////////////////
        // either there are more deposits than withdrawals
        if (settleValues.pendingDeposit > settleValues.assetsToWithdraw) {
            _asset.safeTransferFrom(
                address(pendingSilo), owner(), assetsToOwner
            );
            if (settleValues.assetsToWithdraw > 0) {
                _asset.safeTransferFrom(
                    address(pendingSilo),
                    address(claimableSilo),
                    settleValues.assetsToWithdraw
                );
            }
        } else if (settleValues.pendingDeposit < settleValues.assetsToWithdraw)
        {
            _asset.safeTransferFrom(
                owner(), address(claimableSilo), assetsToVault
            );
            if (settleValues.pendingDeposit > 0) {
                _asset.safeTransferFrom(
                    address(pendingSilo),
                    address(claimableSilo),
                    settleValues.pendingDeposit
                );
            }
        } else if (settleValues.pendingDeposit > 0) {
            // if _pendingDeposit == assetsToWithdraw AND _pendingDeposit > 0
            // (and assetsToWithdraw > 0)
            _asset.safeTransferFrom(
                address(pendingSilo),
                address(claimableSilo),
                settleValues.assetsToWithdraw
            );
        }

        emit Deposit(
            address(pendingSilo),
            address(claimableSilo),
            settleValues.pendingDeposit,
            settleValues.sharesToMint
        );

        emit Withdraw(
            address(pendingSilo),
            address(claimableSilo),
            address(pendingSilo),
            settleValues.assetsToWithdraw,
            settleValues.pendingRedeem
        );

        settleValues.lastSavedBalance = settleValues.lastSavedBalance
            - settleValues.fees + settleValues.pendingDeposit
            - settleValues.assetsToWithdraw;
        lastSavedBalance = settleValues.lastSavedBalance;

        epochs[epochId].totalSupplySnapshot =
            settleValues.totalSupplySnapshot;
        epochs[epochId].totalAssetsSnapshot =
            settleValues.totalAssetsSnapshot;

        epochId++;

        return (settleValues.lastSavedBalance, totalSupply());
    }

    /**
     * @dev isCurrentEpoch is used to check if the request is the current epoch.
     * @param requestId The id of the request.
     */
    function isCurrentEpoch(uint256 requestId) internal view returns (bool) {
        return requestId == epochId;
    }

    /**
     * @dev _convertToShares is used to convert the assets into shares for a
     * specific epoch/request.
     * @param assets The amount of assets to convert.
     * @param requestId The id of the request.
     * @param rounding The rounding type.
     */
    function _convertToShares(
        uint256 assets,
        uint256 requestId,
        Math.Rounding rounding
    )
        internal
        view
        returns (uint256)
    {
        if (isCurrentEpoch(requestId)) return 0;

        uint256 totalAssets = epochs[requestId].totalAssetsSnapshot + 1;
        uint256 totalSupply = epochs[requestId].totalSupplySnapshot + 1;

        return assets.mulDiv(totalSupply, totalAssets, rounding);
    }

    /**
     * @dev _convertToAssets is used to convert the shares into assets for a
     * specific epoch/request.
     * @param shares The amount of shares to convert.
     * @param requestId The id of the request.
     * @param rounding The rounding type.
     */
    function _convertToAssets(
        uint256 shares,
        uint256 requestId,
        Math.Rounding rounding
    )
        internal
        view
        returns (uint256)
    {
        if (isCurrentEpoch(requestId)) return 0;

        uint256 totalSupply = epochs[requestId].totalSupplySnapshot + 1;
        uint256 totalAssets = epochs[requestId].totalAssetsSnapshot + 1;

        return shares.mulDiv(totalAssets, totalSupply, rounding);
    }

    /**
     * @dev _checkMaxDrawdown is used to check if the max drawdown is reached.
     * @param _lastSavedBalance The last saved balance.
     * @param newSavedBalance The new saved balance.
     */
    function _checkMaxDrawdown(
        uint256 _lastSavedBalance,
        uint256 newSavedBalance
    )
        internal
        view
    {
        if (
            newSavedBalance
                < _lastSavedBalance.mulDiv(
                    BPS_DIVIDER - _maxDrawdown, BPS_DIVIDER, Math.Rounding.Ceil
                )
        ) revert MaxDrawdownReached();
    }

    function _computeFees(
        uint256 _lastSavedBalance,
        uint256 newSavedBalance
    )
        internal
        view
        returns (uint256 fees)
    {
        if (newSavedBalance > _lastSavedBalance && feesInBps > 0) {
            uint256 profits;
            unchecked {
                profits = newSavedBalance - _lastSavedBalance;
            }
            fees = (profits).mulDiv(feesInBps, BPS_DIVIDER, Math.Rounding.Floor);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/ERC20Permit.sol)

pragma solidity ^0.8.20;

import {IERC20Permit} from "./IERC20Permit.sol";
import {ERC20} from "../ERC20.sol";
import {ECDSA} from "../../../utils/cryptography/ECDSA.sol";
import {EIP712} from "../../../utils/cryptography/EIP712.sol";
import {Nonces} from "../../../utils/Nonces.sol";

/**
 * @dev Implementation of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
abstract contract ERC20Permit is ERC20, IERC20Permit, EIP712, Nonces {
    bytes32 private constant PERMIT_TYPEHASH =
        keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");

    /**
     * @dev Permit deadline has expired.
     */
    error ERC2612ExpiredSignature(uint256 deadline);

    /**
     * @dev Mismatched signature.
     */
    error ERC2612InvalidSigner(address signer, address owner);

    /**
     * @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `"1"`.
     *
     * It's a good idea to use the same `name` that is defined as the ERC20 token name.
     */
    constructor(string memory name) EIP712(name, "1") {}

    /**
     * @inheritdoc IERC20Permit
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual {
        if (block.timestamp > deadline) {
            revert ERC2612ExpiredSignature(deadline);
        }

        bytes32 structHash = keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));

        bytes32 hash = _hashTypedDataV4(structHash);

        address signer = ECDSA.recover(hash, v, r, s);
        if (signer != owner) {
            revert ERC2612InvalidSigner(signer, owner);
        }

        _approve(owner, spender, value);
    }

    /**
     * @inheritdoc IERC20Permit
     */
    function nonces(address owner) public view virtual override(IERC20Permit, Nonces) returns (uint256) {
        return super.nonces(owner);
    }

    /**
     * @inheritdoc IERC20Permit
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view virtual returns (bytes32) {
        return _domainSeparatorV4();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {Context} from "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;

/**
 * @dev Standard ERC20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC4626.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../token/ERC20/IERC20.sol";
import {IERC20Metadata} from "../token/ERC20/extensions/IERC20Metadata.sol";

/**
 * @dev Interface of the ERC4626 "Tokenized Vault Standard", as defined in
 * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].
 */
interface IERC4626 is IERC20, IERC20Metadata {
    event Deposit(address indexed sender, address indexed owner, uint256 assets, uint256 shares);

    event Withdraw(
        address indexed sender,
        address indexed receiver,
        address indexed owner,
        uint256 assets,
        uint256 shares
    );

    /**
     * @dev Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.
     *
     * - MUST be an ERC-20 token contract.
     * - MUST NOT revert.
     */
    function asset() external view returns (address assetTokenAddress);

    /**
     * @dev Returns the total amount of the underlying asset that is “managed” by Vault.
     *
     * - SHOULD include any compounding that occurs from yield.
     * - MUST be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT revert.
     */
    function totalAssets() external view returns (uint256 totalManagedAssets);

    /**
     * @dev Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToShares(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToAssets(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,
     * through a deposit call.
     *
     * - MUST return a limited value if receiver is subject to some deposit limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
     * - MUST NOT revert.
     */
    function maxDeposit(address receiver) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit
     *   call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called
     *   in the same transaction.
     * - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
     *   deposit would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewDeposit(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   deposit execution, and are accounted for during deposit.
     * - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function deposit(uint256 assets, address receiver) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.
     * - MUST return a limited value if receiver is subject to some mint limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
     * - MUST NOT revert.
     */
    function maxMint(address receiver) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
     *   in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the
     *   same transaction.
     * - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
     *   would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by minting.
     */
    function previewMint(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint
     *   execution, and are accounted for during mint.
     * - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function mint(uint256 shares, address receiver) external returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the
     * Vault, through a withdraw call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxWithdraw(address owner) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw
     *   call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if
     *   called
     *   in the same transaction.
     * - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though
     *   the withdrawal would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewWithdraw(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Burns shares from owner and sends exactly assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   withdraw execution, and are accounted for during withdraw.
     * - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function withdraw(uint256 assets, address receiver, address owner) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,
     * through a redeem call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxRedeem(address owner) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their redeemption at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call
     *   in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the
     *   same transaction.
     * - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the
     *   redemption would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by redeeming.
     */
    function previewRedeem(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Burns exactly shares from owner and sends assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   redeem execution, and are accounted for during redeem.
     * - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function redeem(uint256 shares, address receiver, address owner) external returns (uint256 assets);
}

// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity 0.8.21;

interface ERC7540Receiver {
    function onERC7540DepositReceived(
        address operator,
        address owner,
        uint256 requestId,
        uint256 assets,
        bytes memory data
    )
        external
        returns (bytes4);

    function onERC7540RedeemReceived(
        address operator,
        address owner,
        uint256 requestId,
        uint256 shares,
        bytes memory data
    )
        external
        returns (bytes4);
}

//SPDX-License-Identifier: MIT
pragma solidity 0.8.21;

import { Ownable2StepUpgradeable } from
    "@openzeppelin/contracts-upgradeable/access/Ownable2StepUpgradeable.sol";
import {
    ERC20Upgradeable,
    IERC20
} from "@openzeppelin/contracts-upgradeable/token/ERC20/ERC20Upgradeable.sol";
import { IERC20Metadata } from
    "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import { ERC20PermitUpgradeable } from
    "@openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC20PermitUpgradeable.sol";
import { ERC20PausableUpgradeable } from
    "@openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC20PausableUpgradeable.sol";
import { SafeERC20 } from
    "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { Initializable } from
    "@openzeppelin/contracts/proxy/utils/Initializable.sol";
import { ERC20Permit } from
    "@openzeppelin/contracts/token/ERC20/extensions/ERC20Permit.sol";
import { IERC4626 } from "@openzeppelin/contracts/interfaces/IERC4626.sol";
import { Math } from "@openzeppelin/contracts/utils/math/Math.sol";

/*
 *         @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@%=::::::=%@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@*=#=--=*=*@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@:*=    =#:@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@:@@    @@:@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@:@@    @@:@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@:@@    @@:@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@*-.    .-*@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@*        *@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@.         .@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@*  Amphor  *@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@*==========#@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@+==========*@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@*   Sync   *@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@%  Vault  %@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@=        +@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@%       %@@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@@=      =@@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@@%     .@@@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@@@=    =@@@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@@@%----%@@@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@%+:::::+%@@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@@########@@@@@@@@@@@@@@@@@@@@@
 *         @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
 *
 *            d8888                        888
 *           d88888                        888
 *          d88P888                        888
 *         d88P 888 88888b.d88b.  88888b.  88888b.   .d88b.  888d888
 *        d88P  888 888 "888 "88b 888 "88b 888 "88b d88""88b 888P"
 *       d88P   888 888  888  888 888  888 888  888 888  888 888
 *      d8888888888 888  888  888 888 d88P 888  888 Y88..88P 888
 *     d88P     888 888  888  888 88888P"  888  888  "Y88P"  888.io
 *                                888
 *                                888
 *                                888
 */

/*
 * ########
 * # LIBS #
 * ########
*/
using Math for uint256; // only used for `mulDiv` operations.
using SafeERC20 for IERC20; // `safeTransfer` and `safeTransferFrom`

struct PermitParams {
    uint256 value;
    uint256 deadline;
    uint8 v;
    bytes32 r;
    bytes32 s;
}

uint16 constant MAX_FEES = 3000; // 30%

abstract contract SyncVault is
    IERC4626,
    Ownable2StepUpgradeable,
    ERC20PermitUpgradeable,
    ERC20PausableUpgradeable
{
    /*
     * ####################################
     * # AMPHOR SYNTHETIC RELATED STORAGE #
     * ####################################
    */

    // @return Amount of the perf fees applied on the positive yield.
    uint16 public feesInBps;
    uint16 internal _maxDrawdown; // guardrail
    uint8 private _underlyingDecimals;
    IERC20 internal _asset; // underlying asset
    bool public vaultIsOpen; // vault is open or closed
    uint256 public lastSavedBalance; // last saved balance

    /*
     * ##########
     * # EVENTS #
     * ##########
    */
    event EpochStart(
        uint256 indexed timestamp, uint256 lastSavedBalance, uint256 totalShares
    );

    event EpochEnd(
        uint256 indexed timestamp,
        uint256 lastSavedBalance,
        uint256 returnedAssets,
        uint256 fees,
        uint256 totalShares
    );

    event FeesChanged(uint16 oldFees, uint16 newFees);

    /*
     * ##########
     * # ERRORS #
     * ##########
     */
    error VaultIsClosed();
    error VaultIsOpen();
    error FeesTooHigh();
    error ERC4626ExceededMaxDeposit(
        address receiver, uint256 assets, uint256 max
    );
    error ERC4626ExceededMaxMint(address receiver, uint256 shares, uint256 max);
    error ERC4626ExceededMaxWithdraw(address owner, uint256 assets, uint256 max);
    error ERC4626ExceededMaxRedeem(address owner, uint256 shares, uint256 max);
    error VaultIsEmpty(); // We cannot start an epoch with an empty vault
    error MaxDrawdownReached();
    error PermitFailed(); // see
        // https://dedaub.com/blog/phantom-functions-and-the-billion-dollar-no-op

    /*
     * ##############################
     * # AMPHOR SYNTHETIC FUNCTIONS #
     * ##############################
     */
    modifier whenClosed() {
        if (vaultIsOpen) revert VaultIsOpen();
        _;
    }

    /// @custom:oz-upgrades-unsafe-allow constructor
    constructor() {
        _disableInitializers();
    }

    function initialize(
        uint16 fees,
        address owner,
        IERC20 underlying,
        uint256 bootstrapAmount,
        string memory name,
        string memory symbol
    )
        public
        virtual
        onlyInitializing
    {
        if (fees > MAX_FEES) revert FeesTooHigh();
        feesInBps = fees;
        vaultIsOpen = true;
        _maxDrawdown = 3000; // 30%
        _asset = underlying;
        _underlyingDecimals =
            uint8(IERC20Metadata(address(underlying)).decimals());
        __ERC20_init(name, symbol);
        __Ownable_init(owner);
        __ERC20Permit_init(name);
        __ERC20Pausable_init();
        deposit(bootstrapAmount, owner);
    }

    /**
     * @dev The `withdraw` function is used to withdraw the specified underlying
     * assets amount in exchange of a proportional amount of shares.
     * @param assets The underlying assets amount to be converted into shares.
     * @param receiver The address of the shares receiver.
     * @param owner The address of the owner.
     * @return Amount of shares received in exchange of the specified underlying
     * assets amount.
     */
    function withdraw(
        uint256 assets,
        address receiver,
        address owner
    )
        external
        whenNotPaused
        returns (uint256)
    {
        uint256 maxAssets = maxWithdraw(owner);
        if (assets > maxAssets) {
            revert ERC4626ExceededMaxWithdraw(owner, assets, maxAssets);
        }

        uint256 sharesAmount = previewWithdraw(assets);
        _withdraw(_msgSender(), receiver, owner, assets, sharesAmount);

        return sharesAmount;
    }

    /*
     * #################################
     * # Pausability RELATED FUNCTIONS #
     * #################################
    */
    function pause() external onlyOwner {
        _pause();
    }

    function unpause() external onlyOwner {
        _unpause();
    }

    /*
     * ######################################
     * # AMPHOR SYNTHETIC RELATED FUNCTIONS #
     * ######################################
    */

    /**
     * @dev The `setFee` function is used to modify the protocol fees.
     * @notice The `setFee` function is used to modify the perf fees.
     * It can only be called by the owner of the contract (`onlyOwner`
     * modifier).
     * It can't exceed 30% (3000 in BPS).
     * @param newFee The new perf fees to be applied.
     */
    function setFee(uint16 newFee) external onlyOwner {
        if (!vaultIsOpen) revert VaultIsClosed();
        if (newFee > MAX_FEES) revert FeesTooHigh();
        feesInBps = newFee;
        emit FeesChanged(feesInBps, newFee);
    }

    function setMaxDrawdown(uint16 newMaxDrawdown) external onlyOwner {
        if (newMaxDrawdown > 10_000) revert MaxDrawdownReached();
        _maxDrawdown = newMaxDrawdown;
    }

    function open(uint256 assetReturned) external virtual;
    function close() external virtual;

    /*
     * #################################
     * #   Permit RELATED FUNCTIONS    #
     * #################################
    */

    /**
     * @dev The `depositWithPermit` function is used to deposit underlying
     * assets
     * into the vault using a permit for approval.
     * @param assets The underlying assets amount to be converted into
     * shares.
     * @param receiver The address of the shares receiver.
     * @param permitParams The permit struct containing the permit signature and
     * data.
     * @return Amount of shares received in exchange of the specified underlying
     * assets amount.
     */
    function depositWithPermit(
        uint256 assets,
        address receiver,
        PermitParams calldata permitParams
    )
        external
        returns (uint256)
    {
        address _msgSender = _msgSender();
        if (_asset.allowance(_msgSender, address(this)) < assets) {
            execPermit(_msgSender, address(this), permitParams);
        }
        return deposit(assets, receiver);
    }

    /**
     * @dev See {IERC4626-deposit}
     * @notice The `deposit` function is used to deposit underlying assets into
     * the vault.
     * @param assets The underlying assets amount to be converted into shares.
     * @param receiver The address of the shares receiver.
     * @return Amount of shares received in exchange of the
     * specified underlying assets amount.
     */
    function deposit(
        uint256 assets,
        address receiver
    )
        public
        whenNotPaused
        returns (uint256)
    {
        uint256 maxAssets = maxDeposit(receiver);
        if (assets > maxAssets) {
            revert ERC4626ExceededMaxDeposit(receiver, assets, maxAssets);
        }

        uint256 sharesAmount = previewDeposit(assets);
        _deposit(_msgSender(), receiver, assets, sharesAmount);

        return sharesAmount;
    }

    /**
     * @dev The `mint` function is used to mint the specified amount of shares
     * in
     * exchange of the corresponding assets amount from owner.
     * @param shares The shares amount to be converted into underlying assets.
     * @param receiver The address of the shares receiver.
     * @return Amount of underlying assets deposited in exchange of the
     * specified
     * amount of shares.
     */
    function mint(
        uint256 shares,
        address receiver
    )
        public
        whenNotPaused
        returns (uint256)
    {
        uint256 maxShares = maxMint(receiver);
        if (shares > maxShares) {
            revert ERC4626ExceededMaxMint(receiver, shares, maxShares);
        }

        uint256 assetsAmount = previewMint(shares);
        _deposit(_msgSender(), receiver, assetsAmount, shares);

        return assetsAmount;
    }

    /**
     * @dev The `redeem` function is used to redeem the specified amount of
     * shares in exchange of the corresponding underlying assets amount from
     * owner.
     * @param shares The shares amount to be converted into underlying assets.
     * @param receiver The address of the shares receiver.
     * @param owner The address of the owner.
     * @return Amount of underlying assets received in exchange of the specified
     * amount of shares.
     */
    function redeem(
        uint256 shares,
        address receiver,
        address owner
    )
        public
        whenNotPaused
        returns (uint256)
    {
        uint256 maxShares = maxRedeem(owner);
        if (shares > maxShares) {
            revert ERC4626ExceededMaxRedeem(owner, shares, maxShares);
        }

        uint256 assetsAmount = previewRedeem(shares);
        _withdraw(_msgSender(), receiver, owner, assetsAmount, shares);

        return assetsAmount;
    }

    // @return address of the underlying asset.
    function asset() public view returns (address) {
        return address(_asset);
    }

    // @dev See {IERC4626-convertToShares}.
    function convertToShares(uint256 assets) public view returns (uint256) {
        return _convertToShares(assets, Math.Rounding.Floor);
    }

    function sharesBalanceInAsset(address owner)
        public
        view
        returns (uint256)
    {
        return convertToAssets(balanceOf(owner));
    }

    // @dev See {IERC4626-convertToAssets}.
    function convertToAssets(uint256 shares) public view returns (uint256) {
        return _convertToAssets(shares, Math.Rounding.Floor);
    }

    /*
    * @dev The `maxDeposit` function is used to calculate the maximum deposit.
     * @notice If the vault is locked or paused, users are not allowed to
     * deposit,
     * the maxDeposit is 0.
     * @return Amount of the maximum underlying assets deposit amount.
     */
    function maxDeposit(address) public view returns (uint256) {
        return vaultIsOpen && !paused() ? type(uint256).max : 0;
    }

    /**
     * @dev The `maxMint` function is used to calculate the maximum amount of
     * shares you can mint.
     * @notice If the vault is locked or paused, the maxMint is 0.
     * @return Amount of the maximum shares mintable for the specified address.
     */
    function maxMint(address) public view returns (uint256) {
        return vaultIsOpen && !paused() ? type(uint256).max : 0;
    }

    /**
     * @dev See {IERC4626-maxWithdraw}.
     * @notice If the function is called during the lock period the maxWithdraw
     * is `0`.
     * @return Amount of the maximum number of withdrawable underlying assets.
     */
    function maxWithdraw(address owner) public view returns (uint256) {
        return vaultIsOpen && !paused()
            ? _convertToAssets(balanceOf(owner), Math.Rounding.Floor)
            : 0;
    }

    /**
     * @dev See {IERC4626-maxRedeem}.
     * @notice If the function is called during the lock period the maxRedeem is
     * `0`;
     * @param owner The address of the owner.
     * @return Amount of the maximum number of redeemable shares.
     */
    function maxRedeem(address owner) public view returns (uint256) {
        return vaultIsOpen && !paused() ? balanceOf(owner) : 0;
    }

    /**
     * @dev See {IERC4626-previewDeposit}.
     */
    function previewDeposit(uint256 assets) public view returns (uint256) {
        return _convertToShares(assets, Math.Rounding.Floor);
    }

    /**
     * @dev See {IERC4626-previewMint}.
     */
    function previewMint(uint256 shares) public view returns (uint256) {
        return _convertToAssets(shares, Math.Rounding.Ceil);
    }

    /**
     * @dev See {IERC4626-previewWithdraw}
     */
    function previewWithdraw(uint256 assets) public view returns (uint256) {
        return _convertToShares(assets, Math.Rounding.Ceil);
    }

    /**
     * @dev See {IERC4626-previewRedeem}
     */
    function previewRedeem(uint256 shares) public view returns (uint256) {
        return _convertToAssets(shares, Math.Rounding.Floor);
    }

    function totalAssets() public view returns (uint256) {
        if (vaultIsOpen) return _asset.balanceOf(address(this));
        else return _asset.balanceOf(address(this)) + lastSavedBalance;
    }

    /**
     * @dev The `_deposit` function is used to deposit the specified underlying
     * assets amount in exchange of a proportionnal amount of shares.
     * @param caller The address of the caller.
     * @param receiver The address of the shares receiver.
     * @param assets The underlying assets amount to be converted into shares.
     * @param shares The shares amount to be converted into underlying assets.
     */
    function _deposit(
        address caller,
        address receiver,
        uint256 assets,
        uint256 shares
    )
        internal
    {
        // If _asset is ERC777, transferFrom can trigger a reentrancy BEFORE the
        // transfer happens through the tokensToSend hook. On the other hand,
        // the tokenReceived hook, that is triggered after the transfer,calls
        // the vault, which is assumed not malicious.
        //
        // Conclusion: we need to do the transfer before we mint so that any
        // reentrancy would happen before the assets are transferred and before
        // the shares are minted, which is a valid state.
        // slither-disable-next-line reentrancy-no-eth
        _asset.safeTransferFrom(caller, address(this), assets);
        _mint(receiver, shares);
        emit Deposit(caller, receiver, assets, shares);
    }

    /**
     * @dev The function `_withdraw` is used to withdraw the specified
     * underlying assets amount in exchange of a proportionnal amount of shares
     * by
     * specifying all the params.
     * @notice The `withdraw` function is used to withdraw the specified
     * underlying assets amount in exchange of a proportionnal amount of shares.
     * @param receiver The address of the shares receiver.
     * @param owner The address of the owner.
     * @param assets The underlying assets amount to be converted into shares.
     * @param shares The shares amount to be converted into underlying assets.
     */
    function _withdraw(
        address caller,
        address receiver,
        address owner,
        uint256 assets,
        uint256 shares
    )
        internal
    {
        if (caller != owner) _spendAllowance(owner, caller, shares);

        _burn(owner, shares);
        _asset.safeTransfer(receiver, assets);

        emit Withdraw(caller, receiver, owner, assets, shares);
    }

    function _update(
        address from,
        address to,
        uint256 value
    )
        internal
        virtual
        override(ERC20Upgradeable, ERC20PausableUpgradeable)
    {
        ERC20PausableUpgradeable._update(from, to, value);
    }

    function execPermit(
        address owner,
        address spender,
        PermitParams calldata permitParams
    )
        internal
    {
        ERC20Permit(address(_asset)).permit(
            owner,
            spender,
            permitParams.value,
            permitParams.deadline,
            permitParams.v,
            permitParams.r,
            permitParams.s
        );
        if (_asset.allowance(owner, spender) != permitParams.value) {
            revert PermitFailed();
        }
    }

    /**
     * @dev Internal conversion function (from assets to shares) with support
     * for rounding direction.
     * @param assets Theunderlying assets amount to be converted into shares.
     * @param rounding The rounding direction.
     * @return Amount of shares received in exchange of the specified underlying
     * assets amount.
     */
    function _convertToShares(
        uint256 assets,
        Math.Rounding rounding
    )
        internal
        view
        returns (uint256)
    {
        return assets.mulDiv(totalSupply() + 1, totalAssets() + 1, rounding);
    }

    /**
     * @dev Internal conversion function (from shares to assets) with support
     * for rounding direction.
     * @param shares The shares amount to be converted into underlying assets.
     * @param rounding The rounding direction.
     * @return Amount of underlying assets received in exchange of the
     * specified amount of shares.
     */
    function _convertToAssets(
        uint256 shares,
        Math.Rounding rounding
    )
        internal
        view
        returns (uint256)
    {
        return shares.mulDiv(totalAssets() + 1, totalSupply() + 1, rounding);
    }

    function decimals()
        public
        view
        virtual
        override(ERC20Upgradeable, IERC20Metadata)
        returns (uint8)
    {
        return _underlyingDecimals;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.20;

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS
    }

    /**
     * @dev The signature derives the `address(0)`.
     */
    error ECDSAInvalidSignature();

    /**
     * @dev The signature has an invalid length.
     */
    error ECDSAInvalidSignatureLength(uint256 length);

    /**
     * @dev The signature has an S value that is in the upper half order.
     */
    error ECDSAInvalidSignatureS(bytes32 s);

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with `signature` or an error. This will not
     * return address(0) without also returning an error description. Errors are documented using an enum (error type)
     * and a bytes32 providing additional information about the error.
     *
     * If no error is returned, then the address can be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError, bytes32) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, signature);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     */
    function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError, bytes32) {
        unchecked {
            bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
            // We do not check for an overflow here since the shift operation results in 0 or 1.
            uint8 v = uint8((uint256(vs) >> 255) + 27);
            return tryRecover(hash, v, r, s);
        }
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, r, vs);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError, bytes32) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS, s);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature, bytes32(0));
        }

        return (signer, RecoverError.NoError, bytes32(0));
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, v, r, s);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Optionally reverts with the corresponding custom error according to the `error` argument provided.
     */
    function _throwError(RecoverError error, bytes32 errorArg) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert ECDSAInvalidSignature();
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert ECDSAInvalidSignatureLength(uint256(errorArg));
        } else if (error == RecoverError.InvalidSignatureS) {
            revert ECDSAInvalidSignatureS(errorArg);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/EIP712.sol)

pragma solidity ^0.8.20;

import {MessageHashUtils} from "./MessageHashUtils.sol";
import {ShortStrings, ShortString} from "../ShortStrings.sol";
import {IERC5267} from "../../interfaces/IERC5267.sol";

/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding scheme specified in the EIP requires a domain separator and a hash of the typed structured data, whose
 * encoding is very generic and therefore its implementation in Solidity is not feasible, thus this contract
 * does not implement the encoding itself. Protocols need to implement the type-specific encoding they need in order to
 * produce the hash of their typed data using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * NOTE: In the upgradeable version of this contract, the cached values will correspond to the address, and the domain
 * separator of the implementation contract. This will cause the {_domainSeparatorV4} function to always rebuild the
 * separator from the immutable values, which is cheaper than accessing a cached version in cold storage.
 *
 * @custom:oz-upgrades-unsafe-allow state-variable-immutable
 */
abstract contract EIP712 is IERC5267 {
    using ShortStrings for *;

    bytes32 private constant TYPE_HASH =
        keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");

    // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
    // invalidate the cached domain separator if the chain id changes.
    bytes32 private immutable _cachedDomainSeparator;
    uint256 private immutable _cachedChainId;
    address private immutable _cachedThis;

    bytes32 private immutable _hashedName;
    bytes32 private immutable _hashedVersion;

    ShortString private immutable _name;
    ShortString private immutable _version;
    string private _nameFallback;
    string private _versionFallback;

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    constructor(string memory name, string memory version) {
        _name = name.toShortStringWithFallback(_nameFallback);
        _version = version.toShortStringWithFallback(_versionFallback);
        _hashedName = keccak256(bytes(name));
        _hashedVersion = keccak256(bytes(version));

        _cachedChainId = block.chainid;
        _cachedDomainSeparator = _buildDomainSeparator();
        _cachedThis = address(this);
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        if (address(this) == _cachedThis && block.chainid == _cachedChainId) {
            return _cachedDomainSeparator;
        } else {
            return _buildDomainSeparator();
        }
    }

    function _buildDomainSeparator() private view returns (bytes32) {
        return keccak256(abi.encode(TYPE_HASH, _hashedName, _hashedVersion, block.chainid, address(this)));
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return MessageHashUtils.toTypedDataHash(_domainSeparatorV4(), structHash);
    }

    /**
     * @dev See {IERC-5267}.
     */
    function eip712Domain()
        public
        view
        virtual
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        )
    {
        return (
            hex"0f", // 01111
            _EIP712Name(),
            _EIP712Version(),
            block.chainid,
            address(this),
            bytes32(0),
            new uint256[](0)
        );
    }

    /**
     * @dev The name parameter for the EIP712 domain.
     *
     * NOTE: By default this function reads _name which is an immutable value.
     * It only reads from storage if necessary (in case the value is too large to fit in a ShortString).
     */
    // solhint-disable-next-line func-name-mixedcase
    function _EIP712Name() internal view returns (string memory) {
        return _name.toStringWithFallback(_nameFallback);
    }

    /**
     * @dev The version parameter for the EIP712 domain.
     *
     * NOTE: By default this function reads _version which is an immutable value.
     * It only reads from storage if necessary (in case the value is too large to fit in a ShortString).
     */
    // solhint-disable-next-line func-name-mixedcase
    function _EIP712Version() internal view returns (string memory) {
        return _version.toStringWithFallback(_versionFallback);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Nonces.sol)
pragma solidity ^0.8.20;

/**
 * @dev Provides tracking nonces for addresses. Nonces will only increment.
 */
abstract contract Nonces {
    /**
     * @dev The nonce used for an `account` is not the expected current nonce.
     */
    error InvalidAccountNonce(address account, uint256 currentNonce);

    mapping(address account => uint256) private _nonces;

    /**
     * @dev Returns the next unused nonce for an address.
     */
    function nonces(address owner) public view virtual returns (uint256) {
        return _nonces[owner];
    }

    /**
     * @dev Consumes a nonce.
     *
     * Returns the current value and increments nonce.
     */
    function _useNonce(address owner) internal virtual returns (uint256) {
        // For each account, the nonce has an initial value of 0, can only be incremented by one, and cannot be
        // decremented or reset. This guarantees that the nonce never overflows.
        unchecked {
            // It is important to do x++ and not ++x here.
            return _nonces[owner]++;
        }
    }

    /**
     * @dev Same as {_useNonce} but checking that `nonce` is the next valid for `owner`.
     */
    function _useCheckedNonce(address owner, uint256 nonce) internal virtual {
        uint256 current = _useNonce(owner);
        if (nonce != current) {
            revert InvalidAccountNonce(owner, current);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable2Step.sol)

pragma solidity ^0.8.20;

import {OwnableUpgradeable} from "./OwnableUpgradeable.sol";
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which provides access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is specified at deployment time in the constructor for `Ownable`. This
 * can later be changed with {transferOwnership} and {acceptOwnership}.
 *
 * This module is used through inheritance. It will make available all functions
 * from parent (Ownable).
 */
abstract contract Ownable2StepUpgradeable is Initializable, OwnableUpgradeable {
    /// @custom:storage-location erc7201:openzeppelin.storage.Ownable2Step
    struct Ownable2StepStorage {
        address _pendingOwner;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Ownable2Step")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant Ownable2StepStorageLocation = 0x237e158222e3e6968b72b9db0d8043aacf074ad9f650f0d1606b4d82ee432c00;

    function _getOwnable2StepStorage() private pure returns (Ownable2StepStorage storage $) {
        assembly {
            $.slot := Ownable2StepStorageLocation
        }
    }

    event OwnershipTransferStarted(address indexed previousOwner, address indexed newOwner);

    function __Ownable2Step_init() internal onlyInitializing {
    }

    function __Ownable2Step_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev Returns the address of the pending owner.
     */
    function pendingOwner() public view virtual returns (address) {
        Ownable2StepStorage storage $ = _getOwnable2StepStorage();
        return $._pendingOwner;
    }

    /**
     * @dev Starts the ownership transfer of the contract to a new account. Replaces the pending transfer if there is one.
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual override onlyOwner {
        Ownable2StepStorage storage $ = _getOwnable2StepStorage();
        $._pendingOwner = newOwner;
        emit OwnershipTransferStarted(owner(), newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`) and deletes any pending owner.
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual override {
        Ownable2StepStorage storage $ = _getOwnable2StepStorage();
        delete $._pendingOwner;
        super._transferOwnership(newOwner);
    }

    /**
     * @dev The new owner accepts the ownership transfer.
     */
    function acceptOwnership() public virtual {
        address sender = _msgSender();
        if (pendingOwner() != sender) {
            revert OwnableUnauthorizedAccount(sender);
        }
        _transferOwnership(sender);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {IERC20Metadata} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import {ContextUpgradeable} from "../../utils/ContextUpgradeable.sol";
import {IERC20Errors} from "@openzeppelin/contracts/interfaces/draft-IERC6093.sol";
import {Initializable} from "../../proxy/utils/Initializable.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 */
abstract contract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20, IERC20Metadata, IERC20Errors {
    /// @custom:storage-location erc7201:openzeppelin.storage.ERC20
    struct ERC20Storage {
        mapping(address account => uint256) _balances;

        mapping(address account => mapping(address spender => uint256)) _allowances;

        uint256 _totalSupply;

        string _name;
        string _symbol;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.ERC20")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant ERC20StorageLocation = 0x52c63247e1f47db19d5ce0460030c497f067ca4cebf71ba98eeadabe20bace00;

    function _getERC20Storage() private pure returns (ERC20Storage storage $) {
        assembly {
            $.slot := ERC20StorageLocation
        }
    }

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    function __ERC20_init(string memory name_, string memory symbol_) internal onlyInitializing {
        __ERC20_init_unchained(name_, symbol_);
    }

    function __ERC20_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {
        ERC20Storage storage $ = _getERC20Storage();
        $._name = name_;
        $._symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        ERC20Storage storage $ = _getERC20Storage();
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            $._totalSupply += value;
        } else {
            uint256 fromBalance = $._balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                $._balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                $._totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                $._balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     * ```
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        ERC20Storage storage $ = _getERC20Storage();
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        $._allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/ERC20Permit.sol)

pragma solidity ^0.8.20;

import {IERC20Permit} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol";
import {ERC20Upgradeable} from "../ERC20Upgradeable.sol";
import {ECDSA} from "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";
import {EIP712Upgradeable} from "../../../utils/cryptography/EIP712Upgradeable.sol";
import {NoncesUpgradeable} from "../../../utils/NoncesUpgradeable.sol";
import {Initializable} from "../../../proxy/utils/Initializable.sol";

/**
 * @dev Implementation of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
abstract contract ERC20PermitUpgradeable is Initializable, ERC20Upgradeable, IERC20Permit, EIP712Upgradeable, NoncesUpgradeable {
    bytes32 private constant PERMIT_TYPEHASH =
        keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");

    /**
     * @dev Permit deadline has expired.
     */
    error ERC2612ExpiredSignature(uint256 deadline);

    /**
     * @dev Mismatched signature.
     */
    error ERC2612InvalidSigner(address signer, address owner);

    /**
     * @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `"1"`.
     *
     * It's a good idea to use the same `name` that is defined as the ERC20 token name.
     */
    function __ERC20Permit_init(string memory name) internal onlyInitializing {
        __EIP712_init_unchained(name, "1");
    }

    function __ERC20Permit_init_unchained(string memory) internal onlyInitializing {}

    /**
     * @inheritdoc IERC20Permit
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual {
        if (block.timestamp > deadline) {
            revert ERC2612ExpiredSignature(deadline);
        }

        bytes32 structHash = keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));

        bytes32 hash = _hashTypedDataV4(structHash);

        address signer = ECDSA.recover(hash, v, r, s);
        if (signer != owner) {
            revert ERC2612InvalidSigner(signer, owner);
        }

        _approve(owner, spender, value);
    }

    /**
     * @inheritdoc IERC20Permit
     */
    function nonces(address owner) public view virtual override(IERC20Permit, NoncesUpgradeable) returns (uint256) {
        return super.nonces(owner);
    }

    /**
     * @inheritdoc IERC20Permit
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view virtual returns (bytes32) {
        return _domainSeparatorV4();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/ERC20Pausable.sol)

pragma solidity ^0.8.20;

import {ERC20Upgradeable} from "../ERC20Upgradeable.sol";
import {PausableUpgradeable} from "../../../utils/PausableUpgradeable.sol";
import {Initializable} from "../../../proxy/utils/Initializable.sol";

/**
 * @dev ERC20 token with pausable token transfers, minting and burning.
 *
 * Useful for scenarios such as preventing trades until the end of an evaluation
 * period, or having an emergency switch for freezing all token transfers in the
 * event of a large bug.
 *
 * IMPORTANT: This contract does not include public pause and unpause functions. In
 * addition to inheriting this contract, you must define both functions, invoking the
 * {Pausable-_pause} and {Pausable-_unpause} internal functions, with appropriate
 * access control, e.g. using {AccessControl} or {Ownable}. Not doing so will
 * make the contract pause mechanism of the contract unreachable, and thus unusable.
 */
abstract contract ERC20PausableUpgradeable is Initializable, ERC20Upgradeable, PausableUpgradeable {
    function __ERC20Pausable_init() internal onlyInitializing {
        __Pausable_init_unchained();
    }

    function __ERC20Pausable_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev See {ERC20-_update}.
     *
     * Requirements:
     *
     * - the contract must not be paused.
     */
    function _update(address from, address to, uint256 value) internal virtual override whenNotPaused {
        super._update(from, to, value);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.20;

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```solidity
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 *
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Storage of the initializable contract.
     *
     * It's implemented on a custom ERC-7201 namespace to reduce the risk of storage collisions
     * when using with upgradeable contracts.
     *
     * @custom:storage-location erc7201:openzeppelin.storage.Initializable
     */
    struct InitializableStorage {
        /**
         * @dev Indicates that the contract has been initialized.
         */
        uint64 _initialized;
        /**
         * @dev Indicates that the contract is in the process of being initialized.
         */
        bool _initializing;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Initializable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant INITIALIZABLE_STORAGE = 0xf0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00;

    /**
     * @dev The contract is already initialized.
     */
    error InvalidInitialization();

    /**
     * @dev The contract is not initializing.
     */
    error NotInitializing();

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint64 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that in the context of a constructor an `initializer` may be invoked any
     * number of times. This behavior in the constructor can be useful during testing and is not expected to be used in
     * production.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        // Cache values to avoid duplicated sloads
        bool isTopLevelCall = !$._initializing;
        uint64 initialized = $._initialized;

        // Allowed calls:
        // - initialSetup: the contract is not in the initializing state and no previous version was
        //                 initialized
        // - construction: the contract is initialized at version 1 (no reininitialization) and the
        //                 current contract is just being deployed
        bool initialSetup = initialized == 0 && isTopLevelCall;
        bool construction = initialized == 1 && address(this).code.length == 0;

        if (!initialSetup && !construction) {
            revert InvalidInitialization();
        }
        $._initialized = 1;
        if (isTopLevelCall) {
            $._initializing = true;
        }
        _;
        if (isTopLevelCall) {
            $._initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: Setting the version to 2**64 - 1 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint64 version) {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing || $._initialized >= version) {
            revert InvalidInitialization();
        }
        $._initialized = version;
        $._initializing = true;
        _;
        $._initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        _checkInitializing();
        _;
    }

    /**
     * @dev Reverts if the contract is not in an initializing state. See {onlyInitializing}.
     */
    function _checkInitializing() internal view virtual {
        if (!_isInitializing()) {
            revert NotInitializing();
        }
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing) {
            revert InvalidInitialization();
        }
        if ($._initialized != type(uint64).max) {
            $._initialized = type(uint64).max;
            emit Initialized(type(uint64).max);
        }
    }

    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint64) {
        return _getInitializableStorage()._initialized;
    }

    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _getInitializableStorage()._initializing;
    }

    /**
     * @dev Returns a pointer to the storage namespace.
     */
    // solhint-disable-next-line var-name-mixedcase
    function _getInitializableStorage() private pure returns (InitializableStorage storage $) {
        assembly {
            $.slot := INITIALIZABLE_STORAGE
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();

    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }

        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/MessageHashUtils.sol)

pragma solidity ^0.8.20;

import {Strings} from "../Strings.sol";

/**
 * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.
 *
 * The library provides methods for generating a hash of a message that conforms to the
 * https://eips.ethereum.org/EIPS/eip-191[EIP 191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]
 * specifications.
 */
library MessageHashUtils {
    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing a bytes32 `messageHash` with
     * `"\x19Ethereum Signed Message:\n32"` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * NOTE: The `messageHash` parameter is intended to be the result of hashing a raw message with
     * keccak256, although any bytes32 value can be safely used because the final digest will
     * be re-hashed.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes32 messageHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, "\x19Ethereum Signed Message:\n32") // 32 is the bytes-length of messageHash
            mstore(0x1c, messageHash) // 0x1c (28) is the length of the prefix
            digest := keccak256(0x00, 0x3c) // 0x3c is the length of the prefix (0x1c) + messageHash (0x20)
        }
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing an arbitrary `message` with
     * `"\x19Ethereum Signed Message:\n" + len(message)` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes memory message) internal pure returns (bytes32) {
        return
            keccak256(bytes.concat("\x19Ethereum Signed Message:\n", bytes(Strings.toString(message.length)), message));
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x00` (data with intended validator).
     *
     * The digest is calculated by prefixing an arbitrary `data` with `"\x19\x00"` and the intended
     * `validator` address. Then hashing the result.
     *
     * See {ECDSA-recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(hex"19_00", validator, data));
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-712 typed data (EIP-191 version `0x01`).
     *
     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with
     * `\x19\x01` and hashing the result. It corresponds to the hash signed by the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.
     *
     * See {ECDSA-recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, hex"19_01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            digest := keccak256(ptr, 0x42)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/ShortStrings.sol)

pragma solidity ^0.8.20;

import {StorageSlot} from "./StorageSlot.sol";

// | string  | 0xAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA   |
// | length  | 0x                                                              BB |
type ShortString is bytes32;

/**
 * @dev This library provides functions to convert short memory strings
 * into a `ShortString` type that can be used as an immutable variable.
 *
 * Strings of arbitrary length can be optimized using this library if
 * they are short enough (up to 31 bytes) by packing them with their
 * length (1 byte) in a single EVM word (32 bytes). Additionally, a
 * fallback mechanism can be used for every other case.
 *
 * Usage example:
 *
 * ```solidity
 * contract Named {
 *     using ShortStrings for *;
 *
 *     ShortString private immutable _name;
 *     string private _nameFallback;
 *
 *     constructor(string memory contractName) {
 *         _name = contractName.toShortStringWithFallback(_nameFallback);
 *     }
 *
 *     function name() external view returns (string memory) {
 *         return _name.toStringWithFallback(_nameFallback);
 *     }
 * }
 * ```
 */
library ShortStrings {
    // Used as an identifier for strings longer than 31 bytes.
    bytes32 private constant FALLBACK_SENTINEL = 0x00000000000000000000000000000000000000000000000000000000000000FF;

    error StringTooLong(string str);
    error InvalidShortString();

    /**
     * @dev Encode a string of at most 31 chars into a `ShortString`.
     *
     * This will trigger a `StringTooLong` error is the input string is too long.
     */
    function toShortString(string memory str) internal pure returns (ShortString) {
        bytes memory bstr = bytes(str);
        if (bstr.length > 31) {
            revert StringTooLong(str);
        }
        return ShortString.wrap(bytes32(uint256(bytes32(bstr)) | bstr.length));
    }

    /**
     * @dev Decode a `ShortString` back to a "normal" string.
     */
    function toString(ShortString sstr) internal pure returns (string memory) {
        uint256 len = byteLength(sstr);
        // using `new string(len)` would work locally but is not memory safe.
        string memory str = new string(32);
        /// @solidity memory-safe-assembly
        assembly {
            mstore(str, len)
            mstore(add(str, 0x20), sstr)
        }
        return str;
    }

    /**
     * @dev Return the length of a `ShortString`.
     */
    function byteLength(ShortString sstr) internal pure returns (uint256) {
        uint256 result = uint256(ShortString.unwrap(sstr)) & 0xFF;
        if (result > 31) {
            revert InvalidShortString();
        }
        return result;
    }

    /**
     * @dev Encode a string into a `ShortString`, or write it to storage if it is too long.
     */
    function toShortStringWithFallback(string memory value, string storage store) internal returns (ShortString) {
        if (bytes(value).length < 32) {
            return toShortString(value);
        } else {
            StorageSlot.getStringSlot(store).value = value;
            return ShortString.wrap(FALLBACK_SENTINEL);
        }
    }

    /**
     * @dev Decode a string that was encoded to `ShortString` or written to storage using {setWithFallback}.
     */
    function toStringWithFallback(ShortString value, string storage store) internal pure returns (string memory) {
        if (ShortString.unwrap(value) != FALLBACK_SENTINEL) {
            return toString(value);
        } else {
            return store;
        }
    }

    /**
     * @dev Return the length of a string that was encoded to `ShortString` or written to storage using
     * {setWithFallback}.
     *
     * WARNING: This will return the "byte length" of the string. This may not reflect the actual length in terms of
     * actual characters as the UTF-8 encoding of a single character can span over multiple bytes.
     */
    function byteLengthWithFallback(ShortString value, string storage store) internal view returns (uint256) {
        if (ShortString.unwrap(value) != FALLBACK_SENTINEL) {
            return byteLength(value);
        } else {
            return bytes(store).length;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC5267.sol)

pragma solidity ^0.8.20;

interface IERC5267 {
    /**
     * @dev MAY be emitted to signal that the domain could have changed.
     */
    event EIP712DomainChanged();

    /**
     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712
     * signature.
     */
    function eip712Domain()
        external
        view
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        );
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {ContextUpgradeable} from "../utils/ContextUpgradeable.sol";
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    /// @custom:storage-location erc7201:openzeppelin.storage.Ownable
    struct OwnableStorage {
        address _owner;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Ownable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant OwnableStorageLocation = 0x9016d09d72d40fdae2fd8ceac6b6234c7706214fd39c1cd1e609a0528c199300;

    function _getOwnableStorage() private pure returns (OwnableStorage storage $) {
        assembly {
            $.slot := OwnableStorageLocation
        }
    }

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    function __Ownable_init(address initialOwner) internal onlyInitializing {
        __Ownable_init_unchained(initialOwner);
    }

    function __Ownable_init_unchained(address initialOwner) internal onlyInitializing {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        OwnableStorage storage $ = _getOwnableStorage();
        return $._owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        OwnableStorage storage $ = _getOwnableStorage();
        address oldOwner = $._owner;
        $._owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.20;

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```solidity
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 *
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Storage of the initializable contract.
     *
     * It's implemented on a custom ERC-7201 namespace to reduce the risk of storage collisions
     * when using with upgradeable contracts.
     *
     * @custom:storage-location erc7201:openzeppelin.storage.Initializable
     */
    struct InitializableStorage {
        /**
         * @dev Indicates that the contract has been initialized.
         */
        uint64 _initialized;
        /**
         * @dev Indicates that the contract is in the process of being initialized.
         */
        bool _initializing;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Initializable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant INITIALIZABLE_STORAGE = 0xf0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00;

    /**
     * @dev The contract is already initialized.
     */
    error InvalidInitialization();

    /**
     * @dev The contract is not initializing.
     */
    error NotInitializing();

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint64 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that in the context of a constructor an `initializer` may be invoked any
     * number of times. This behavior in the constructor can be useful during testing and is not expected to be used in
     * production.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        // Cache values to avoid duplicated sloads
        bool isTopLevelCall = !$._initializing;
        uint64 initialized = $._initialized;

        // Allowed calls:
        // - initialSetup: the contract is not in the initializing state and no previous version was
        //                 initialized
        // - construction: the contract is initialized at version 1 (no reininitialization) and the
        //                 current contract is just being deployed
        bool initialSetup = initialized == 0 && isTopLevelCall;
        bool construction = initialized == 1 && address(this).code.length == 0;

        if (!initialSetup && !construction) {
            revert InvalidInitialization();
        }
        $._initialized = 1;
        if (isTopLevelCall) {
            $._initializing = true;
        }
        _;
        if (isTopLevelCall) {
            $._initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: Setting the version to 2**64 - 1 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint64 version) {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing || $._initialized >= version) {
            revert InvalidInitialization();
        }
        $._initialized = version;
        $._initializing = true;
        _;
        $._initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        _checkInitializing();
        _;
    }

    /**
     * @dev Reverts if the contract is not in an initializing state. See {onlyInitializing}.
     */
    function _checkInitializing() internal view virtual {
        if (!_isInitializing()) {
            revert NotInitializing();
        }
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing) {
            revert InvalidInitialization();
        }
        if ($._initialized != type(uint64).max) {
            $._initialized = type(uint64).max;
            emit Initialized(type(uint64).max);
        }
    }

    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint64) {
        return _getInitializableStorage()._initialized;
    }

    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _getInitializableStorage()._initializing;
    }

    /**
     * @dev Returns a pointer to the storage namespace.
     */
    // solhint-disable-next-line var-name-mixedcase
    function _getInitializableStorage() private pure returns (InitializableStorage storage $) {
        assembly {
            $.slot := INITIALIZABLE_STORAGE
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }

    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/EIP712.sol)

pragma solidity ^0.8.20;

import {MessageHashUtils} from "@openzeppelin/contracts/utils/cryptography/MessageHashUtils.sol";
import {IERC5267} from "@openzeppelin/contracts/interfaces/IERC5267.sol";
import {Initializable} from "../../proxy/utils/Initializable.sol";

/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding scheme specified in the EIP requires a domain separator and a hash of the typed structured data, whose
 * encoding is very generic and therefore its implementation in Solidity is not feasible, thus this contract
 * does not implement the encoding itself. Protocols need to implement the type-specific encoding they need in order to
 * produce the hash of their typed data using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * NOTE: In the upgradeable version of this contract, the cached values will correspond to the address, and the domain
 * separator of the implementation contract. This will cause the {_domainSeparatorV4} function to always rebuild the
 * separator from the immutable values, which is cheaper than accessing a cached version in cold storage.
 */
abstract contract EIP712Upgradeable is Initializable, IERC5267 {
    bytes32 private constant TYPE_HASH =
        keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");

    /// @custom:storage-location erc7201:openzeppelin.storage.EIP712
    struct EIP712Storage {
        /// @custom:oz-renamed-from _HASHED_NAME
        bytes32 _hashedName;
        /// @custom:oz-renamed-from _HASHED_VERSION
        bytes32 _hashedVersion;

        string _name;
        string _version;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.EIP712")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant EIP712StorageLocation = 0xa16a46d94261c7517cc8ff89f61c0ce93598e3c849801011dee649a6a557d100;

    function _getEIP712Storage() private pure returns (EIP712Storage storage $) {
        assembly {
            $.slot := EIP712StorageLocation
        }
    }

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    function __EIP712_init(string memory name, string memory version) internal onlyInitializing {
        __EIP712_init_unchained(name, version);
    }

    function __EIP712_init_unchained(string memory name, string memory version) internal onlyInitializing {
        EIP712Storage storage $ = _getEIP712Storage();
        $._name = name;
        $._version = version;

        // Reset prior values in storage if upgrading
        $._hashedName = 0;
        $._hashedVersion = 0;
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        return _buildDomainSeparator();
    }

    function _buildDomainSeparator() private view returns (bytes32) {
        return keccak256(abi.encode(TYPE_HASH, _EIP712NameHash(), _EIP712VersionHash(), block.chainid, address(this)));
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return MessageHashUtils.toTypedDataHash(_domainSeparatorV4(), structHash);
    }

    /**
     * @dev See {IERC-5267}.
     */
    function eip712Domain()
        public
        view
        virtual
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        )
    {
        EIP712Storage storage $ = _getEIP712Storage();
        // If the hashed name and version in storage are non-zero, the contract hasn't been properly initialized
        // and the EIP712 domain is not reliable, as it will be missing name and version.
        require($._hashedName == 0 && $._hashedVersion == 0, "EIP712: Uninitialized");

        return (
            hex"0f", // 01111
            _EIP712Name(),
            _EIP712Version(),
            block.chainid,
            address(this),
            bytes32(0),
            new uint256[](0)
        );
    }

    /**
     * @dev The name parameter for the EIP712 domain.
     *
     * NOTE: This function reads from storage by default, but can be redefined to return a constant value if gas costs
     * are a concern.
     */
    function _EIP712Name() internal view virtual returns (string memory) {
        EIP712Storage storage $ = _getEIP712Storage();
        return $._name;
    }

    /**
     * @dev The version parameter for the EIP712 domain.
     *
     * NOTE: This function reads from storage by default, but can be redefined to return a constant value if gas costs
     * are a concern.
     */
    function _EIP712Version() internal view virtual returns (string memory) {
        EIP712Storage storage $ = _getEIP712Storage();
        return $._version;
    }

    /**
     * @dev The hash of the name parameter for the EIP712 domain.
     *
     * NOTE: In previous versions this function was virtual. In this version you should override `_EIP712Name` instead.
     */
    function _EIP712NameHash() internal view returns (bytes32) {
        EIP712Storage storage $ = _getEIP712Storage();
        string memory name = _EIP712Name();
        if (bytes(name).length > 0) {
            return keccak256(bytes(name));
        } else {
            // If the name is empty, the contract may have been upgraded without initializing the new storage.
            // We return the name hash in storage if non-zero, otherwise we assume the name is empty by design.
            bytes32 hashedName = $._hashedName;
            if (hashedName != 0) {
                return hashedName;
            } else {
                return keccak256("");
            }
        }
    }

    /**
     * @dev The hash of the version parameter for the EIP712 domain.
     *
     * NOTE: In previous versions this function was virtual. In this version you should override `_EIP712Version` instead.
     */
    function _EIP712VersionHash() internal view returns (bytes32) {
        EIP712Storage storage $ = _getEIP712Storage();
        string memory version = _EIP712Version();
        if (bytes(version).length > 0) {
            return keccak256(bytes(version));
        } else {
            // If the version is empty, the contract may have been upgraded without initializing the new storage.
            // We return the version hash in storage if non-zero, otherwise we assume the version is empty by design.
            bytes32 hashedVersion = $._hashedVersion;
            if (hashedVersion != 0) {
                return hashedVersion;
            } else {
                return keccak256("");
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Nonces.sol)
pragma solidity ^0.8.20;
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Provides tracking nonces for addresses. Nonces will only increment.
 */
abstract contract NoncesUpgradeable is Initializable {
    /**
     * @dev The nonce used for an `account` is not the expected current nonce.
     */
    error InvalidAccountNonce(address account, uint256 currentNonce);

    /// @custom:storage-location erc7201:openzeppelin.storage.Nonces
    struct NoncesStorage {
        mapping(address account => uint256) _nonces;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Nonces")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant NoncesStorageLocation = 0x5ab42ced628888259c08ac98db1eb0cf702fc1501344311d8b100cd1bfe4bb00;

    function _getNoncesStorage() private pure returns (NoncesStorage storage $) {
        assembly {
            $.slot := NoncesStorageLocation
        }
    }

    function __Nonces_init() internal onlyInitializing {
    }

    function __Nonces_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev Returns the next unused nonce for an address.
     */
    function nonces(address owner) public view virtual returns (uint256) {
        NoncesStorage storage $ = _getNoncesStorage();
        return $._nonces[owner];
    }

    /**
     * @dev Consumes a nonce.
     *
     * Returns the current value and increments nonce.
     */
    function _useNonce(address owner) internal virtual returns (uint256) {
        NoncesStorage storage $ = _getNoncesStorage();
        // For each account, the nonce has an initial value of 0, can only be incremented by one, and cannot be
        // decremented or reset. This guarantees that the nonce never overflows.
        unchecked {
            // It is important to do x++ and not ++x here.
            return $._nonces[owner]++;
        }
    }

    /**
     * @dev Same as {_useNonce} but checking that `nonce` is the next valid for `owner`.
     */
    function _useCheckedNonce(address owner, uint256 nonce) internal virtual {
        uint256 current = _useNonce(owner);
        if (nonce != current) {
            revert InvalidAccountNonce(owner, current);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Pausable.sol)

pragma solidity ^0.8.20;

import {ContextUpgradeable} from "../utils/ContextUpgradeable.sol";
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract PausableUpgradeable is Initializable, ContextUpgradeable {
    /// @custom:storage-location erc7201:openzeppelin.storage.Pausable
    struct PausableStorage {
        bool _paused;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Pausable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant PausableStorageLocation = 0xcd5ed15c6e187e77e9aee88184c21f4f2182ab5827cb3b7e07fbedcd63f03300;

    function _getPausableStorage() private pure returns (PausableStorage storage $) {
        assembly {
            $.slot := PausableStorageLocation
        }
    }

    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    /**
     * @dev The operation failed because the contract is paused.
     */
    error EnforcedPause();

    /**
     * @dev The operation failed because the contract is not paused.
     */
    error ExpectedPause();

    /**
     * @dev Initializes the contract in unpaused state.
     */
    function __Pausable_init() internal onlyInitializing {
        __Pausable_init_unchained();
    }

    function __Pausable_init_unchained() internal onlyInitializing {
        PausableStorage storage $ = _getPausableStorage();
        $._paused = false;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        _requireNotPaused();
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        _requirePaused();
        _;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        PausableStorage storage $ = _getPausableStorage();
        return $._paused;
    }

    /**
     * @dev Throws if the contract is paused.
     */
    function _requireNotPaused() internal view virtual {
        if (paused()) {
            revert EnforcedPause();
        }
    }

    /**
     * @dev Throws if the contract is not paused.
     */
    function _requirePaused() internal view virtual {
        if (!paused()) {
            revert ExpectedPause();
        }
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        PausableStorage storage $ = _getPausableStorage();
        $._paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        PausableStorage storage $ = _getPausableStorage();
        $._paused = false;
        emit Unpaused(_msgSender());
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)

pragma solidity ^0.8.20;

import {Math} from "./math/Math.sol";
import {SignedMath} from "./math/SignedMath.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant HEX_DIGITS = "0123456789abcdef";
    uint8 private constant ADDRESS_LENGTH = 20;

    /**
     * @dev The `value` string doesn't fit in the specified `length`.
     */
    error StringsInsufficientHexLength(uint256 value, uint256 length);

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toStringSigned(int256 value) internal pure returns (string memory) {
        return string.concat(value < 0 ? "-" : "", toString(SignedMath.abs(value)));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        uint256 localValue = value;
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = HEX_DIGITS[localValue & 0xf];
            localValue >>= 4;
        }
        if (localValue != 0) {
            revert StringsInsufficientHexLength(value, length);
        }
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal
     * representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/StorageSlot.sol)
// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.

pragma solidity ^0.8.20;

/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```solidity
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(newImplementation.code.length > 0);
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }

    struct BooleanSlot {
        bool value;
    }

    struct Bytes32Slot {
        bytes32 value;
    }

    struct Uint256Slot {
        uint256 value;
    }

    struct StringSlot {
        string value;
    }

    struct BytesSlot {
        bytes value;
    }

    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` with member `value` located at `slot`.
     */
    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.
     */
    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` with member `value` located at `slot`.
     */
    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
     */
    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

{
  "remappings": [
    "forge-std/=lib/forge-std/src/",
    "@openzeppelin/contracts/=lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/",
    "@openzeppelin/contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/contracts/",
    "@src/=src/",
    "@test/=test/",
    "ds-test/=lib/forge-std/lib/ds-test/src/",
    "erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
    "forge-gas-snapshot/=lib/permit2/lib/forge-gas-snapshot/src/",
    "openzeppelin-contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/",
    "openzeppelin-foundry-upgrades/=lib/openzeppelin-foundry-upgrades/src/",
    "permit2/=lib/permit2/",
    "solidity-stringutils/=lib/openzeppelin-foundry-upgrades/lib/solidity-stringutils/",
    "solmate/=lib/permit2/lib/solmate/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 10000
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "paris",
  "viaIR": false,
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"AddressEmptyCode","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"AddressInsufficientBalance","type":"error"},{"inputs":[],"name":"EnforcedPause","type":"error"},{"inputs":[],"name":"ExpectedPause","type":"error"},{"inputs":[],"name":"FailedInnerCall","type":"error"},{"inputs":[{"internalType":"uint256","name":"expectedTokenInBalance","type":"uint256"},{"internalType":"uint256","name":"actualTokenInBalance","type":"uint256"}],"name":"InconsistantSwapData","type":"error"},{"inputs":[{"internalType":"uint256","name":"sharesMinted","type":"uint256"},{"internalType":"uint256","name":"minSharesMinted","type":"uint256"}],"name":"NotEnoughSharesMinted","type":"error"},{"inputs":[{"internalType":"uint256","name":"previewedUnderlying","type":"uint256"},{"internalType":"uint256","name":"withdrawedUnderlying","type":"uint256"}],"name":"NotEnoughUnderlying","type":"error"},{"inputs":[{"internalType":"address","name":"router","type":"address"}],"name":"NotRouter","type":"error"},{"inputs":[{"internalType":"contract IERC4626","name":"vault","type":"address"}],"name":"NotVault","type":"error"},{"inputs":[],"name":"NullMinShares","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"OwnableInvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"OwnableUnauthorizedAccount","type":"error"},{"inputs":[],"name":"PermitFailed","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"SafeERC20FailedOperation","type":"error"},{"inputs":[{"internalType":"string","name":"reason","type":"string"}],"name":"SwapFailed","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferStarted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Paused","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"router","type":"address"},{"indexed":true,"internalType":"contract IERC20","name":"token","type":"address"}],"name":"RouterApproved","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"router","type":"address"},{"indexed":false,"internalType":"bool","name":"allowed","type":"bool"}],"name":"RouterAuthorized","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Unpaused","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"contract IERC4626","name":"vault","type":"address"},{"indexed":false,"internalType":"bool","name":"allowed","type":"bool"}],"name":"VaultAuthorized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"contract IERC4626","name":"vault","type":"address"},{"indexed":true,"internalType":"address","name":"router","type":"address"},{"indexed":false,"internalType":"contract IERC20","name":"tokenIn","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"shares","type":"uint256"}],"name":"ZapAndDeposit","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"contract IERC7540","name":"vault","type":"address"},{"indexed":true,"internalType":"address","name":"router","type":"address"},{"indexed":false,"internalType":"contract IERC20","name":"tokenIn","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"ZapAndRequestDeposit","type":"event"},{"inputs":[],"name":"acceptOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"},{"internalType":"address","name":"router","type":"address"}],"name":"approveTokenForRouter","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"routerAddress","type":"address"}],"name":"authorizedRouters","outputs":[{"internalType":"bool","name":"isAuthorized","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IERC4626","name":"vault","type":"address"}],"name":"authorizedVaults","outputs":[{"internalType":"bool","name":"isAuthorized","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"paused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pendingOwner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"router","type":"address"}],"name":"toggleRouterAuthorization","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IERC7540","name":"vault","type":"address"}],"name":"toggleVaultAuthorization","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"unpause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"withdrawNativeToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"}],"name":"withdrawToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"tokenIn","type":"address"},{"internalType":"contract IERC4626","name":"vault","type":"address"},{"internalType":"address","name":"router","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"zapAndDeposit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"tokenIn","type":"address"},{"internalType":"contract IERC4626","name":"vault","type":"address"},{"internalType":"address","name":"router","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"bytes","name":"swapData","type":"bytes"},{"components":[{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"},{"internalType":"uint8","name":"v","type":"uint8"},{"internalType":"bytes32","name":"r","type":"bytes32"},{"internalType":"bytes32","name":"s","type":"bytes32"}],"internalType":"struct PermitParams","name":"permitParams","type":"tuple"}],"name":"zapAndDepositWithPermit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"tokenIn","type":"address"},{"internalType":"contract IERC7540","name":"vault","type":"address"},{"internalType":"address","name":"router","type":"address"},{"internalType":"uint256","name":"amountIn","type":"uint256"},{"internalType":"bytes","name":"swapData","type":"bytes"},{"internalType":"bytes","name":"callback7540Data","type":"bytes"}],"name":"zapAndRequestDeposit","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"tokenIn","type":"address"},{"internalType":"contract IERC7540","name":"vault","type":"address"},{"internalType":"address","name":"router","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"bytes","name":"swapData","type":"bytes"},{"components":[{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"},{"internalType":"uint8","name":"v","type":"uint8"},{"internalType":"bytes32","name":"r","type":"bytes32"},{"internalType":"bytes32","name":"s","type":"bytes32"}],"internalType":"struct PermitParams","name":"permitParams","type":"tuple"},{"internalType":"bytes","name":"callback7540Data","type":"bytes"}],"name":"zapAndRequestDepositWithPermit","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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