Contract

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.6.10;

import {AggregatorInterface} from "../interfaces/AggregatorInterface.sol";
import {OracleInterface} from "../interfaces/OracleInterface.sol";
import {OpynPricerInterface} from "../interfaces/OpynPricerInterface.sol";
import {SafeMath} from "../packages/oz/SafeMath.sol";

/**
 * @notice A Pricer contract for one asset as reported by Chainlink
 */
contract ChainLinkPricer is OpynPricerInterface {
    using SafeMath for uint256;

    /// @dev base decimals
    uint256 internal constant BASE = 8;

    /// @notice chainlink response decimals
    uint256 public aggregatorDecimals;

    /// @notice the opyn oracle address
    OracleInterface public oracle;
    /// @notice the aggregator for an asset
    AggregatorInterface public aggregator;

    /// @notice asset that this pricer will a get price for
    address public asset;
    /// @notice bot address that is allowed to call setExpiryPriceInOracle
    address public bot;

    /**
     * @param _bot priveleged address that can call setExpiryPriceInOracle
     * @param _asset asset that this pricer will get a price for
     * @param _aggregator Chainlink aggregator contract for the asset
     * @param _oracle Opyn Oracle address
     */
    constructor(
        address _bot,
        address _asset,
        address _aggregator,
        address _oracle
    ) public {
        require(_bot != address(0), "ChainLinkPricer: Cannot set 0 address as bot");
        require(_oracle != address(0), "ChainLinkPricer: Cannot set 0 address as oracle");
        require(_aggregator != address(0), "ChainLinkPricer: Cannot set 0 address as aggregator");

        bot = _bot;
        oracle = OracleInterface(_oracle);
        aggregator = AggregatorInterface(_aggregator);
        asset = _asset;

        aggregatorDecimals = uint256(aggregator.decimals());
    }

    /**
     * @notice set the expiry price in the oracle, can only be called by Bot address
     * @dev a roundId must be provided to confirm price validity, which is the first Chainlink price provided after the expiryTimestamp
     * @param _expiryTimestamp expiry to set a price for
     * @param _roundId the first roundId after expiryTimestamp
     */
    function setExpiryPriceInOracle(uint256 _expiryTimestamp, uint80 _roundId) external {
        (, int256 price, , uint256 roundTimestamp, ) = aggregator.getRoundData(_roundId);

        require(_expiryTimestamp <= roundTimestamp, "ChainLinkPricer: roundId not first after expiry");
        require(price >= 0, "ChainLinkPricer: invalid price");

        if (msg.sender != bot) {
            bool isCorrectRoundId;
            uint80 previousRoundId = uint80(uint256(_roundId).sub(1));

            while (!isCorrectRoundId) {
                (, , , uint256 previousRoundTimestamp, ) = aggregator.getRoundData(previousRoundId);

                if (previousRoundTimestamp == 0) {
                    require(previousRoundId > 0, "ChainLinkPricer: Invalid previousRoundId");
                    previousRoundId = previousRoundId - 1;
                } else if (previousRoundTimestamp > _expiryTimestamp) {
                    revert("ChainLinkPricer: previousRoundId not last before expiry");
                } else {
                    isCorrectRoundId = true;
                }
            }
        }

        oracle.setExpiryPrice(asset, _expiryTimestamp, uint256(price));
    }

    /**
     * @notice get the live price for the asset
     * @dev overides the getPrice function in OpynPricerInterface
     * @return price of the asset in USD, scaled by 1e8
     */
    function getPrice() external override view returns (uint256) {
        (, int256 answer, , , ) = aggregator.latestRoundData();
        require(answer > 0, "ChainLinkPricer: price is lower than 0");
        // chainlink's answer is already 1e8
        return _scaleToBase(uint256(answer));
    }

    /**
     * @notice get historical chainlink price
     * @param _roundId chainlink round id
     * @return round price and timestamp
     */
    function getHistoricalPrice(uint80 _roundId) external override view returns (uint256, uint256) {
        (, int256 price, , uint256 roundTimestamp, ) = aggregator.getRoundData(_roundId);
        return (_scaleToBase(uint256(price)), roundTimestamp);
    }

    /**
     * @notice scale aggregator response to base decimals (1e8)
     * @param _price aggregator price
     * @return price scaled to 1e8
     */
    function _scaleToBase(uint256 _price) internal view returns (uint256) {
        if (aggregatorDecimals > BASE) {
            uint256 exp = aggregatorDecimals.sub(BASE);
            _price = _price.div(10**exp);
        } else if (aggregatorDecimals < BASE) {
            uint256 exp = BASE.sub(aggregatorDecimals);
            _price = _price.mul(10**exp);
        }

        return _price;
    }
}

/**
 * SPDX-License-Identifier: UNLICENSED
 */
pragma solidity 0.6.10;

/**
 * @dev Interface of the Chainlink aggregator
 */
interface AggregatorInterface {
    function decimals() external view returns (uint8);

    function description() external view returns (string memory);

    function version() external view returns (uint256);

    // getRoundData and latestRoundData should both raise "No data present"
    // if they do not have data to report, instead of returning unset values
    // which could be misinterpreted as actual reported values.
    function getRoundData(uint80 _roundId)
        external
        view
        returns (
            uint80 roundId,
            int256 answer,
            uint256 startedAt,
            uint256 updatedAt,
            uint80 answeredInRound
        );

    function latestRoundData()
        external
        view
        returns (
            uint80 roundId,
            int256 answer,
            uint256 startedAt,
            uint256 updatedAt,
            uint80 answeredInRound
        );
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.6.10;

interface OpynPricerInterface {
    function getPrice() external view returns (uint256);

    function getHistoricalPrice(uint80 _roundId) external view returns (uint256, uint256);
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.6.10;

interface OracleInterface {
    function isLockingPeriodOver(address _asset, uint256 _expiryTimestamp) external view returns (bool);

    function isDisputePeriodOver(address _asset, uint256 _expiryTimestamp) external view returns (bool);

    function getExpiryPrice(address _asset, uint256 _expiryTimestamp) external view returns (uint256, bool);

    function getDisputer() external view returns (address);

    function getPricer(address _asset) external view returns (address);

    function getPrice(address _asset) external view returns (uint256);

    function getPricerLockingPeriod(address _pricer) external view returns (uint256);

    function getPricerDisputePeriod(address _pricer) external view returns (uint256);

    function getChainlinkRoundData(address _asset, uint80 _roundId) external view returns (uint256, uint256);

    // Non-view function

    function setAssetPricer(address _asset, address _pricer) external;

    function setLockingPeriod(address _pricer, uint256 _lockingPeriod) external;

    function setDisputePeriod(address _pricer, uint256 _disputePeriod) external;

    function setExpiryPrice(
        address _asset,
        uint256 _expiryTimestamp,
        uint256 _price
    ) external;

    function disputeExpiryPrice(
        address _asset,
        uint256 _expiryTimestamp,
        uint256 _price
    ) external;

    function setDisputer(address _disputer) external;
}

// SPDX-License-Identifier: MIT
// openzeppelin-contracts v3.1.0

/* solhint-disable */
pragma solidity ^0.6.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

{
  "remappings": [],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_bot","type":"address"},{"internalType":"address","name":"_asset","type":"address"},{"internalType":"address","name":"_aggregator","type":"address"},{"internalType":"address","name":"_oracle","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"aggregator","outputs":[{"internalType":"contract AggregatorInterface","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"aggregatorDecimals","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"asset","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"bot","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint80","name":"_roundId","type":"uint80"}],"name":"getHistoricalPrice","outputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getPrice","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"oracle","outputs":[{"internalType":"contract OracleInterface","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_expiryTimestamp","type":"uint256"},{"internalType":"uint80","name":"_roundId","type":"uint80"}],"name":"setExpiryPriceInOracle","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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