Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;

import {ERC20} from "@solmate/tokens/ERC20.sol";
import {WETH} from "@solmate/tokens/WETH.sol";
import {BoringVault} from "src/base/BoringVault.sol";
import {AccountantWithRateProviders} from "src/base/Roles/AccountantWithRateProviders.sol";
import {FixedPointMathLib} from "@solmate/utils/FixedPointMathLib.sol";
import {SafeTransferLib} from "@solmate/utils/SafeTransferLib.sol";
import {BeforeTransferHook} from "src/interfaces/BeforeTransferHook.sol";
import {Auth, Authority} from "@solmate/auth/Auth.sol";
import {ReentrancyGuard} from "@solmate/utils/ReentrancyGuard.sol";

contract TellerWithMultiAssetSupport is Auth, BeforeTransferHook, ReentrancyGuard {
    using FixedPointMathLib for uint256;
    using SafeTransferLib for ERC20;
    using SafeTransferLib for WETH;

    // ========================================= CONSTANTS =========================================

    /**
     * @notice Native address used to tell the contract to handle native asset deposits.
     */
    address internal constant NATIVE = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;

    /**
     * @notice The maximum possible share lock period.
     */
    uint256 internal constant MAX_SHARE_LOCK_PERIOD = 3 days;

    // ========================================= STATE =========================================

    /**
     * @notice Mapping ERC20s to an isSupported bool.
     */
    mapping(ERC20 => bool) public isSupported;

    /**
     * @notice The deposit nonce used to map to a deposit hash.
     */
    uint96 public depositNonce = 1;

    /**
     * @notice After deposits, shares are locked to the msg.sender's address
     *         for `shareLockPeriod`.
     * @dev During this time all trasnfers from msg.sender will revert, and
     *      deposits are refundable.
     */
    uint64 public shareLockPeriod;

    /**
     * @notice Used to pause calls to `deposit` and `depositWithPermit`.
     */
    bool public isPaused;

    /**
     * @dev Maps deposit nonce to keccak256(address receiver, address depositAsset, uint256 depositAmount, uint256 shareAmount, uint256 timestamp, uint256 shareLockPeriod).
     */
    mapping(uint256 => bytes32) public publicDepositHistory;

    mapping(address => uint256) public shareUnlockTime;

    //============================== ERRORS ===============================

    error TellerWithMultiAssetSupport__ShareLockPeriodTooLong();
    error TellerWithMultiAssetSupport__SharesAreLocked();
    error TellerWithMultiAssetSupport__SharesAreUnLocked();
    error TellerWithMultiAssetSupport__BadDepositHash();
    error TellerWithMultiAssetSupport__AssetNotSupported();
    error TellerWithMultiAssetSupport__ZeroAssets();
    error TellerWithMultiAssetSupport__MinimumMintNotMet();
    error TellerWithMultiAssetSupport__MinimumAssetsNotMet();
    error TellerWithMultiAssetSupport__PermitFailedAndAllowanceTooLow();
    error TellerWithMultiAssetSupport__ZeroShares();
    error TellerWithMultiAssetSupport__DualDeposit();
    error TellerWithMultiAssetSupport__Paused();

    //============================== EVENTS ===============================

    event Paused();
    event Unpaused();
    event AssetAdded(address indexed asset);
    event AssetRemoved(address indexed asset);
    event Deposit(
        uint256 indexed nonce,
        address indexed receiver,
        address indexed depositAsset,
        uint256 depositAmount,
        uint256 shareAmount,
        uint256 depositTimestamp,
        uint256 shareLockPeriodAtTimeOfDeposit
    );
    event BulkDeposit(address indexed asset, uint256 depositAmount);
    event BulkWithdraw(address indexed asset, uint256 shareAmount);
    event DepositRefunded(uint256 indexed nonce, bytes32 depositHash, address indexed user);

    //============================== IMMUTABLES ===============================

    /**
     * @notice The BoringVault this contract is working with.
     */
    BoringVault public immutable vault;

    /**
     * @notice The AccountantWithRateProviders this contract is working with.
     */
    AccountantWithRateProviders public immutable accountant;

    /**
     * @notice One share of the BoringVault.
     */
    uint256 internal immutable ONE_SHARE;

    /**
     * @notice The native wrapper contract.
     */
    WETH public immutable nativeWrapper;

    constructor(address _owner, address _vault, address _accountant, address _weth)
        Auth(_owner, Authority(address(0)))
    {
        vault = BoringVault(payable(_vault));
        ONE_SHARE = 10 ** vault.decimals();
        accountant = AccountantWithRateProviders(_accountant);
        nativeWrapper = WETH(payable(_weth));
    }

    // ========================================= ADMIN FUNCTIONS =========================================

    /**
     * @notice Pause this contract, which prevents future calls to `deposit` and `depositWithPermit`.
     * @dev Callable by MULTISIG_ROLE.
     */
    function pause() external requiresAuth {
        isPaused = true;
        emit Paused();
    }

    /**
     * @notice Unpause this contract, which allows future calls to `deposit` and `depositWithPermit`.
     * @dev Callable by MULTISIG_ROLE.
     */
    function unpause() external requiresAuth {
        isPaused = false;
        emit Unpaused();
    }

    /**
     * @notice Adds this asset as a deposit asset.
     * @dev The accountant must also support pricing this asset, else the `deposit` call will revert.
     * @dev Callable by OWNER_ROLE.
     */
    function addAsset(ERC20 asset) external requiresAuth {
        isSupported[asset] = true;
        emit AssetAdded(address(asset));
    }

    /**
     * @notice Removes this asset as a deposit asset.
     * @dev Callable by OWNER_ROLE.
     */
    function removeAsset(ERC20 asset) external requiresAuth {
        isSupported[asset] = false;
        emit AssetRemoved(address(asset));
    }

    /**
     * @notice Sets the share lock period.
     * @dev This not only locks shares to the user address, but also serves as the pending deposit period, where deposits can be reverted.
     * @dev If a new shorter share lock period is set, users with pending share locks could make a new deposit to receive 1 wei shares,
     *      and have their shares unlock sooner than their original deposit allows. This state would allow for the user deposit to be refunded,
     *      but only if they have not transferred their shares out of there wallet. This is an accepted limitation, and should be known when decreasing
     *      the share lock period.
     * @dev Callable by OWNER_ROLE.
     */
    function setShareLockPeriod(uint64 _shareLockPeriod) external requiresAuth {
        if (_shareLockPeriod > MAX_SHARE_LOCK_PERIOD) revert TellerWithMultiAssetSupport__ShareLockPeriodTooLong();
        shareLockPeriod = _shareLockPeriod;
    }

    // ========================================= BeforeTransferHook FUNCTIONS =========================================

    /**
     * @notice Implement beforeTransfer hook to check if shares are locked.
     */
    function beforeTransfer(address from) external view {
        if (shareUnlockTime[from] >= block.timestamp) revert TellerWithMultiAssetSupport__SharesAreLocked();
    }

    // ========================================= REVERT DEPOSIT FUNCTIONS =========================================

    /**
     * @notice Allows DEPOSIT_REFUNDER_ROLE to revert a pending deposit.
     * @dev Once a deposit share lock period has passed, it can no longer be reverted.
     * @dev It is possible the admin does not setup the BoringVault to call the transfer hook,
     *      but this contract can still be saving share lock state. In the event this happens
     *      deposits are still refundable if the user has not transferred their shares.
     *      But there is no guarantee that the user has not transferred their shares.
     * @dev Callable by STRATEGIST_MULTISIG_ROLE.
     */
    function refundDeposit(
        uint256 nonce,
        address receiver,
        address depositAsset,
        uint256 depositAmount,
        uint256 shareAmount,
        uint256 depositTimestamp,
        uint256 shareLockUpPeriodAtTimeOfDeposit
    ) external requiresAuth {
        if ((block.timestamp - depositTimestamp) > shareLockUpPeriodAtTimeOfDeposit) {
            // Shares are already unlocked, so we can not revert deposit.
            revert TellerWithMultiAssetSupport__SharesAreUnLocked();
        }
        bytes32 depositHash = keccak256(
            abi.encode(
                receiver, depositAsset, depositAmount, shareAmount, depositTimestamp, shareLockUpPeriodAtTimeOfDeposit
            )
        );
        if (publicDepositHistory[nonce] != depositHash) revert TellerWithMultiAssetSupport__BadDepositHash();

        // Delete hash to prevent refund gas.
        delete publicDepositHistory[nonce];

        // If deposit used native asset, send user back wrapped native asset.
        depositAsset = depositAsset == NATIVE ? address(nativeWrapper) : depositAsset;
        // Burn shares and refund assets to receiver.
        vault.exit(receiver, ERC20(depositAsset), depositAmount, receiver, shareAmount);

        emit DepositRefunded(nonce, depositHash, receiver);
    }

    // ========================================= USER FUNCTIONS =========================================

    /**
     * @notice Allows users to deposit into the BoringVault, if this contract is not paused.
     * @dev Publicly callable.
     */
    function deposit(ERC20 depositAsset, uint256 depositAmount, uint256 minimumMint)
        external
        payable
        requiresAuth
        nonReentrant
        returns (uint256 shares)
    {
        if (isPaused) revert TellerWithMultiAssetSupport__Paused();
        if (!isSupported[depositAsset]) revert TellerWithMultiAssetSupport__AssetNotSupported();

        if (address(depositAsset) == NATIVE) {
            if (msg.value == 0) revert TellerWithMultiAssetSupport__ZeroAssets();
            nativeWrapper.deposit{value: msg.value}();
            depositAmount = msg.value;
            shares = depositAmount.mulDivDown(ONE_SHARE, accountant.getRateInQuoteSafe(nativeWrapper));
            if (shares < minimumMint) revert TellerWithMultiAssetSupport__MinimumMintNotMet();
            // `from` is address(this) since user already sent value.
            nativeWrapper.safeApprove(address(vault), depositAmount);
            vault.enter(address(this), nativeWrapper, depositAmount, msg.sender, shares);
        } else {
            if (msg.value > 0) revert TellerWithMultiAssetSupport__DualDeposit();
            shares = _erc20Deposit(depositAsset, depositAmount, minimumMint, msg.sender);
        }

        _afterPublicDeposit(msg.sender, depositAsset, depositAmount, shares, shareLockPeriod);
    }

    /**
     * @notice Allows users to deposit into BoringVault using permit.
     * @dev Publicly callable.
     */
    function depositWithPermit(
        ERC20 depositAsset,
        uint256 depositAmount,
        uint256 minimumMint,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external requiresAuth nonReentrant returns (uint256 shares) {
        if (isPaused) revert TellerWithMultiAssetSupport__Paused();
        if (!isSupported[depositAsset]) revert TellerWithMultiAssetSupport__AssetNotSupported();

        try depositAsset.permit(msg.sender, address(vault), depositAmount, deadline, v, r, s) {}
        catch {
            if (depositAsset.allowance(msg.sender, address(vault)) < depositAmount) {
                revert TellerWithMultiAssetSupport__PermitFailedAndAllowanceTooLow();
            }
        }
        shares = _erc20Deposit(depositAsset, depositAmount, minimumMint, msg.sender);

        _afterPublicDeposit(msg.sender, depositAsset, depositAmount, shares, shareLockPeriod);
    }

    /**
     * @notice Allows on ramp role to deposit into this contract.
     * @dev Does NOT support native deposits.
     * @dev Callable by SOLVER_ROLE.
     */
    function bulkDeposit(ERC20 depositAsset, uint256 depositAmount, uint256 minimumMint, address to)
        external
        requiresAuth
        nonReentrant
        returns (uint256 shares)
    {
        if (!isSupported[depositAsset]) revert TellerWithMultiAssetSupport__AssetNotSupported();

        shares = _erc20Deposit(depositAsset, depositAmount, minimumMint, to);
        emit BulkDeposit(address(depositAsset), depositAmount);
    }

    /**
     * @notice Allows off ramp role to withdraw from this contract.
     * @dev Callable by SOLVER_ROLE.
     */
    function bulkWithdraw(ERC20 withdrawAsset, uint256 shareAmount, uint256 minimumAssets, address to)
        external
        requiresAuth
        returns (uint256 assetsOut)
    {
        if (!isSupported[withdrawAsset]) revert TellerWithMultiAssetSupport__AssetNotSupported();

        if (shareAmount == 0) revert TellerWithMultiAssetSupport__ZeroShares();
        assetsOut = shareAmount.mulDivDown(accountant.getRateInQuoteSafe(withdrawAsset), ONE_SHARE);
        if (assetsOut < minimumAssets) revert TellerWithMultiAssetSupport__MinimumAssetsNotMet();
        vault.exit(to, withdrawAsset, assetsOut, msg.sender, shareAmount);
        emit BulkWithdraw(address(withdrawAsset), shareAmount);
    }

    // ========================================= INTERNAL HELPER FUNCTIONS =========================================

    /**
     * @notice Implements a common ERC20 deposit into BoringVault.
     */
    function _erc20Deposit(ERC20 depositAsset, uint256 depositAmount, uint256 minimumMint, address to)
        internal
        returns (uint256 shares)
    {
        if (depositAmount == 0) revert TellerWithMultiAssetSupport__ZeroAssets();
        shares = depositAmount.mulDivDown(ONE_SHARE, accountant.getRateInQuoteSafe(depositAsset));
        if (shares < minimumMint) revert TellerWithMultiAssetSupport__MinimumMintNotMet();
        vault.enter(msg.sender, depositAsset, depositAmount, to, shares);
    }

    /**
     * @notice Handle share lock logic, and event.
     */
    function _afterPublicDeposit(
        address user,
        ERC20 depositAsset,
        uint256 depositAmount,
        uint256 shares,
        uint256 currentShareLockPeriod
    ) internal {
        shareUnlockTime[user] = block.timestamp + currentShareLockPeriod;

        uint256 nonce = depositNonce;
        publicDepositHistory[nonce] =
            keccak256(abi.encode(user, depositAsset, depositAmount, shares, block.timestamp, currentShareLockPeriod));
        depositNonce++;
        emit Deposit(nonce, user, address(depositAsset), depositAmount, shares, block.timestamp, currentShareLockPeriod);
    }
}

// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;

/// @notice Modern and gas efficient ERC20 + EIP-2612 implementation.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/tokens/ERC20.sol)
/// @author Modified from Uniswap (https://github.com/Uniswap/uniswap-v2-core/blob/master/contracts/UniswapV2ERC20.sol)
/// @dev Do not manually set balances without updating totalSupply, as the sum of all user balances must not exceed it.
abstract contract ERC20 {
    /*//////////////////////////////////////////////////////////////
                                 EVENTS
    //////////////////////////////////////////////////////////////*/

    event Transfer(address indexed from, address indexed to, uint256 amount);

    event Approval(address indexed owner, address indexed spender, uint256 amount);

    /*//////////////////////////////////////////////////////////////
                            METADATA STORAGE
    //////////////////////////////////////////////////////////////*/

    string public name;

    string public symbol;

    uint8 public immutable decimals;

    /*//////////////////////////////////////////////////////////////
                              ERC20 STORAGE
    //////////////////////////////////////////////////////////////*/

    uint256 public totalSupply;

    mapping(address => uint256) public balanceOf;

    mapping(address => mapping(address => uint256)) public allowance;

    /*//////////////////////////////////////////////////////////////
                            EIP-2612 STORAGE
    //////////////////////////////////////////////////////////////*/

    uint256 internal immutable INITIAL_CHAIN_ID;

    bytes32 internal immutable INITIAL_DOMAIN_SEPARATOR;

    mapping(address => uint256) public nonces;

    /*//////////////////////////////////////////////////////////////
                               CONSTRUCTOR
    //////////////////////////////////////////////////////////////*/

    constructor(
        string memory _name,
        string memory _symbol,
        uint8 _decimals
    ) {
        name = _name;
        symbol = _symbol;
        decimals = _decimals;

        INITIAL_CHAIN_ID = block.chainid;
        INITIAL_DOMAIN_SEPARATOR = computeDomainSeparator();
    }

    /*//////////////////////////////////////////////////////////////
                               ERC20 LOGIC
    //////////////////////////////////////////////////////////////*/

    function approve(address spender, uint256 amount) public virtual returns (bool) {
        allowance[msg.sender][spender] = amount;

        emit Approval(msg.sender, spender, amount);

        return true;
    }

    function transfer(address to, uint256 amount) public virtual returns (bool) {
        balanceOf[msg.sender] -= amount;

        // Cannot overflow because the sum of all user
        // balances can't exceed the max uint256 value.
        unchecked {
            balanceOf[to] += amount;
        }

        emit Transfer(msg.sender, to, amount);

        return true;
    }

    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual returns (bool) {
        uint256 allowed = allowance[from][msg.sender]; // Saves gas for limited approvals.

        if (allowed != type(uint256).max) allowance[from][msg.sender] = allowed - amount;

        balanceOf[from] -= amount;

        // Cannot overflow because the sum of all user
        // balances can't exceed the max uint256 value.
        unchecked {
            balanceOf[to] += amount;
        }

        emit Transfer(from, to, amount);

        return true;
    }

    /*//////////////////////////////////////////////////////////////
                             EIP-2612 LOGIC
    //////////////////////////////////////////////////////////////*/

    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual {
        require(deadline >= block.timestamp, "PERMIT_DEADLINE_EXPIRED");

        // Unchecked because the only math done is incrementing
        // the owner's nonce which cannot realistically overflow.
        unchecked {
            address recoveredAddress = ecrecover(
                keccak256(
                    abi.encodePacked(
                        "\x19\x01",
                        DOMAIN_SEPARATOR(),
                        keccak256(
                            abi.encode(
                                keccak256(
                                    "Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)"
                                ),
                                owner,
                                spender,
                                value,
                                nonces[owner]++,
                                deadline
                            )
                        )
                    )
                ),
                v,
                r,
                s
            );

            require(recoveredAddress != address(0) && recoveredAddress == owner, "INVALID_SIGNER");

            allowance[recoveredAddress][spender] = value;
        }

        emit Approval(owner, spender, value);
    }

    function DOMAIN_SEPARATOR() public view virtual returns (bytes32) {
        return block.chainid == INITIAL_CHAIN_ID ? INITIAL_DOMAIN_SEPARATOR : computeDomainSeparator();
    }

    function computeDomainSeparator() internal view virtual returns (bytes32) {
        return
            keccak256(
                abi.encode(
                    keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"),
                    keccak256(bytes(name)),
                    keccak256("1"),
                    block.chainid,
                    address(this)
                )
            );
    }

    /*//////////////////////////////////////////////////////////////
                        INTERNAL MINT/BURN LOGIC
    //////////////////////////////////////////////////////////////*/

    function _mint(address to, uint256 amount) internal virtual {
        totalSupply += amount;

        // Cannot overflow because the sum of all user
        // balances can't exceed the max uint256 value.
        unchecked {
            balanceOf[to] += amount;
        }

        emit Transfer(address(0), to, amount);
    }

    function _burn(address from, uint256 amount) internal virtual {
        balanceOf[from] -= amount;

        // Cannot underflow because a user's balance
        // will never be larger than the total supply.
        unchecked {
            totalSupply -= amount;
        }

        emit Transfer(from, address(0), amount);
    }
}

// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;

import {ERC20} from "./ERC20.sol";

import {SafeTransferLib} from "../utils/SafeTransferLib.sol";

/// @notice Minimalist and modern Wrapped Ether implementation.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/tokens/WETH.sol)
/// @author Inspired by WETH9 (https://github.com/dapphub/ds-weth/blob/master/src/weth9.sol)
contract WETH is ERC20("Wrapped Ether", "WETH", 18) {
    using SafeTransferLib for address;

    event Deposit(address indexed from, uint256 amount);

    event Withdrawal(address indexed to, uint256 amount);

    function deposit() public payable virtual {
        _mint(msg.sender, msg.value);

        emit Deposit(msg.sender, msg.value);
    }

    function withdraw(uint256 amount) public virtual {
        _burn(msg.sender, amount);

        emit Withdrawal(msg.sender, amount);

        msg.sender.safeTransferETH(amount);
    }

    receive() external payable virtual {
        deposit();
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;

import {Address} from "@openzeppelin/contracts/utils/Address.sol";
import {ERC721Holder} from "@openzeppelin/contracts/token/ERC721/utils/ERC721Holder.sol";
import {ERC1155Holder} from "@openzeppelin/contracts/token/ERC1155/utils/ERC1155Holder.sol";
import {FixedPointMathLib} from "@solmate/utils/FixedPointMathLib.sol";
import {SafeTransferLib} from "@solmate/utils/SafeTransferLib.sol";
import {ERC20} from "@solmate/tokens/ERC20.sol";
import {BeforeTransferHook} from "src/interfaces/BeforeTransferHook.sol";
import {Auth, Authority} from "@solmate/auth/Auth.sol";

contract BoringVault is ERC20, Auth, ERC721Holder, ERC1155Holder {
    using Address for address;
    using SafeTransferLib for ERC20;
    using FixedPointMathLib for uint256;

    // ========================================= STATE =========================================

    /**
     * @notice Contract responsbile for implementing `beforeTransfer`.
     */
    BeforeTransferHook public hook;

    //============================== EVENTS ===============================

    event Enter(address indexed from, address indexed asset, uint256 amount, address indexed to, uint256 shares);
    event Exit(address indexed to, address indexed asset, uint256 amount, address indexed from, uint256 shares);

    //============================== CONSTRUCTOR ===============================

    constructor(address _owner, string memory _name, string memory _symbol, uint8 _decimals)
        ERC20(_name, _symbol, _decimals)
        Auth(_owner, Authority(address(0)))
    {}

    //============================== MANAGE ===============================

    /**
     * @notice Allows manager to make an arbitrary function call from this contract.
     * @dev Callable by MANAGER_ROLE.
     */
    function manage(address target, bytes calldata data, uint256 value)
        external
        requiresAuth
        returns (bytes memory result)
    {
        result = target.functionCallWithValue(data, value);
    }

    /**
     * @notice Allows manager to make arbitrary function calls from this contract.
     * @dev Callable by MANAGER_ROLE.
     */
    function manage(address[] calldata targets, bytes[] calldata data, uint256[] calldata values)
        external
        requiresAuth
        returns (bytes[] memory results)
    {
        uint256 targetsLength = targets.length;
        results = new bytes[](targetsLength);
        for (uint256 i; i < targetsLength; ++i) {
            results[i] = targets[i].functionCallWithValue(data[i], values[i]);
        }
    }

    //============================== ENTER ===============================

    /**
     * @notice Allows minter to mint shares, in exchange for assets.
     * @dev If assetAmount is zero, no assets are transferred in.
     * @dev Callable by MINTER_ROLE.
     */
    function enter(address from, ERC20 asset, uint256 assetAmount, address to, uint256 shareAmount)
        external
        requiresAuth
    {
        // Transfer assets in
        if (assetAmount > 0) asset.safeTransferFrom(from, address(this), assetAmount);

        // Mint shares.
        _mint(to, shareAmount);

        emit Enter(from, address(asset), assetAmount, to, shareAmount);
    }

    //============================== EXIT ===============================

    /**
     * @notice Allows burner to burn shares, in exchange for assets.
     * @dev If assetAmount is zero, no assets are transferred out.
     * @dev Callable by BURNER_ROLE.
     */
    function exit(address to, ERC20 asset, uint256 assetAmount, address from, uint256 shareAmount)
        external
        requiresAuth
    {
        // Burn shares.
        _burn(from, shareAmount);

        // Transfer assets out.
        if (assetAmount > 0) asset.safeTransfer(to, assetAmount);

        emit Exit(to, address(asset), assetAmount, from, shareAmount);
    }

    //============================== BEFORE TRANSFER HOOK ===============================
    /**
     * @notice Sets the share locker.
     * @notice If set to zero address, the share locker logic is disabled.
     * @dev Callable by OWNER_ROLE.
     */
    function setBeforeTransferHook(address _hook) external requiresAuth {
        hook = BeforeTransferHook(_hook);
    }

    /**
     * @notice Check if from addresses shares are locked, reverting if so.
     */
    function _callBeforeTransfer(address from) internal view {
        if (address(hook) != address(0)) hook.beforeTransfer(from);
    }

    function transfer(address to, uint256 amount) public override returns (bool) {
        _callBeforeTransfer(msg.sender);
        return super.transfer(to, amount);
    }

    function transferFrom(address from, address to, uint256 amount) public override returns (bool) {
        _callBeforeTransfer(from);
        return super.transferFrom(from, to, amount);
    }

    //============================== RECEIVE ===============================

    receive() external payable {}
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;

import {FixedPointMathLib} from "@solmate/utils/FixedPointMathLib.sol";
import {IRateProvider} from "src/interfaces/IRateProvider.sol";
import {ERC20} from "@solmate/tokens/ERC20.sol";
import {SafeTransferLib} from "@solmate/utils/SafeTransferLib.sol";
import {BoringVault} from "src/base/BoringVault.sol";
import {Auth, Authority} from "@solmate/auth/Auth.sol";

contract AccountantWithRateProviders is Auth, IRateProvider {
    using FixedPointMathLib for uint256;
    using SafeTransferLib for ERC20;

    // ========================================= STRUCTS =========================================

    /**
     * @param payoutAddress the address `claimFees` sends fees to
     * @param feesOwedInBase total pending fees owed in terms of base
     * @param totalSharesLastUpdate total amount of shares the last exchange rate update
     * @param exchangeRate the current exchange rate in terms of base
     * @param allowedExchangeRateChangeUpper the max allowed change to exchange rate from an update
     * @param allowedExchangeRateChangeLower the min allowed change to exchange rate from an update
     * @param lastUpdateTimestamp the block timestamp of the last exchange rate update
     * @param isPaused whether or not this contract is paused
     * @param minimumUpdateDelayInSeconds the minimum amount of time that must pass between
     *        exchange rate updates, such that the update won't trigger the contract to be paused
     * @param managementFee the management fee
     */
    struct AccountantState {
        address payoutAddress;
        uint128 feesOwedInBase;
        uint128 totalSharesLastUpdate;
        uint96 exchangeRate;
        uint16 allowedExchangeRateChangeUpper;
        uint16 allowedExchangeRateChangeLower;
        uint64 lastUpdateTimestamp;
        bool isPaused;
        uint32 minimumUpdateDelayInSeconds;
        uint16 managementFee;
    }

    /**
     * @param isPeggedToBase whether or not the asset is 1:1 with the base asset
     * @param rateProvider the rate provider for this asset if `isPeggedToBase` is false
     */
    struct RateProviderData {
        bool isPeggedToBase;
        IRateProvider rateProvider;
    }

    // ========================================= STATE =========================================

    /**
     * @notice Store the accountant state in 3 packed slots.
     */
    AccountantState public accountantState;

    /**
     * @notice Maps ERC20s to their RateProviderData.
     */
    mapping(ERC20 => RateProviderData) public rateProviderData;

    //============================== ERRORS ===============================

    error AccountantWithRateProviders__UpperBoundTooSmall();
    error AccountantWithRateProviders__LowerBoundTooLarge();
    error AccountantWithRateProviders__ManagementFeeTooLarge();
    error AccountantWithRateProviders__Paused();
    error AccountantWithRateProviders__ZeroFeesOwed();
    error AccountantWithRateProviders__OnlyCallableByBoringVault();
    error AccountantWithRateProviders__UpdateDelayTooLarge();

    //============================== EVENTS ===============================

    event Paused();
    event Unpaused();
    event DelayInSecondsUpdated(uint32 oldDelay, uint32 newDelay);
    event UpperBoundUpdated(uint16 oldBound, uint16 newBound);
    event LowerBoundUpdated(uint16 oldBound, uint16 newBound);
    event ManagementFeeUpdated(uint16 oldFee, uint16 newFee);
    event PayoutAddressUpdated(address oldPayout, address newPayout);
    event RateProviderUpdated(address asset, bool isPegged, address rateProvider);
    event ExchangeRateUpdated(uint96 oldRate, uint96 newRate, uint64 currentTime);
    event FeesClaimed(address indexed feeAsset, uint256 amount);

    //============================== IMMUTABLES ===============================

    /**
     * @notice The base asset rates are provided in.
     */
    ERC20 public immutable base;

    /**
     * @notice The decimals rates are provided in.
     */
    uint8 public immutable decimals;

    /**
     * @notice The BoringVault this accountant is working with.
     *         Used to determine share supply for fee calculation.
     */
    BoringVault public immutable vault;

    /**
     * @notice One share of the BoringVault.
     */
    uint256 internal immutable ONE_SHARE;

    constructor(
        address _owner,
        address _vault,
        address payoutAddress,
        uint96 startingExchangeRate,
        address _base,
        uint16 allowedExchangeRateChangeUpper,
        uint16 allowedExchangeRateChangeLower,
        uint32 minimumUpdateDelayInSeconds,
        uint16 managementFee
    ) Auth(_owner, Authority(address(0))) {
        base = ERC20(_base);
        decimals = ERC20(_base).decimals();
        vault = BoringVault(payable(_vault));
        ONE_SHARE = 10 ** vault.decimals();
        accountantState = AccountantState({
            payoutAddress: payoutAddress,
            feesOwedInBase: 0,
            totalSharesLastUpdate: uint128(vault.totalSupply()),
            exchangeRate: startingExchangeRate,
            allowedExchangeRateChangeUpper: allowedExchangeRateChangeUpper,
            allowedExchangeRateChangeLower: allowedExchangeRateChangeLower,
            lastUpdateTimestamp: uint64(block.timestamp),
            isPaused: false,
            minimumUpdateDelayInSeconds: minimumUpdateDelayInSeconds,
            managementFee: managementFee
        });
    }

    // ========================================= ADMIN FUNCTIONS =========================================
    /**
     * @notice Pause this contract, which prevents future calls to `updateExchangeRate`, and any safe rate
     *         calls will revert.
     * @dev Callable by MULTISIG_ROLE.
     */
    function pause() external requiresAuth {
        accountantState.isPaused = true;
        emit Paused();
    }

    /**
     * @notice Unpause this contract, which allows future calls to `updateExchangeRate`, and any safe rate
     *         calls will stop reverting.
     * @dev Callable by MULTISIG_ROLE.
     */
    function unpause() external requiresAuth {
        accountantState.isPaused = false;
        emit Unpaused();
    }

    /**
     * @notice Update the minimum time delay between `updateExchangeRate` calls.
     * @dev There are no input requirements, as it is possible the admin would want
     *      the exchange rate updated as frequently as needed.
     * @dev Callable by OWNER_ROLE.
     */
    function updateDelay(uint32 minimumUpdateDelayInSeconds) external requiresAuth {
        if (minimumUpdateDelayInSeconds > 14 days) revert AccountantWithRateProviders__UpdateDelayTooLarge();
        uint32 oldDelay = accountantState.minimumUpdateDelayInSeconds;
        accountantState.minimumUpdateDelayInSeconds = minimumUpdateDelayInSeconds;
        emit DelayInSecondsUpdated(oldDelay, minimumUpdateDelayInSeconds);
    }

    /**
     * @notice Update the allowed upper bound change of exchange rate between `updateExchangeRateCalls`.
     * @dev Callable by OWNER_ROLE.
     */
    function updateUpper(uint16 allowedExchangeRateChangeUpper) external requiresAuth {
        if (allowedExchangeRateChangeUpper < 1e4) revert AccountantWithRateProviders__UpperBoundTooSmall();
        uint16 oldBound = accountantState.allowedExchangeRateChangeUpper;
        accountantState.allowedExchangeRateChangeUpper = allowedExchangeRateChangeUpper;
        emit UpperBoundUpdated(oldBound, allowedExchangeRateChangeUpper);
    }

    /**
     * @notice Update the allowed lower bound change of exchange rate between `updateExchangeRateCalls`.
     * @dev Callable by OWNER_ROLE.
     */
    function updateLower(uint16 allowedExchangeRateChangeLower) external requiresAuth {
        if (allowedExchangeRateChangeLower > 1e4) revert AccountantWithRateProviders__LowerBoundTooLarge();
        uint16 oldBound = accountantState.allowedExchangeRateChangeLower;
        accountantState.allowedExchangeRateChangeLower = allowedExchangeRateChangeLower;
        emit LowerBoundUpdated(oldBound, allowedExchangeRateChangeLower);
    }

    /**
     * @notice Update the management fee to a new value.
     * @dev Callable by OWNER_ROLE.
     */
    function updateManagementFee(uint16 managementFee) external requiresAuth {
        if (managementFee > 0.2e4) revert AccountantWithRateProviders__ManagementFeeTooLarge();
        uint16 oldFee = accountantState.managementFee;
        accountantState.managementFee = managementFee;
        emit ManagementFeeUpdated(oldFee, managementFee);
    }

    /**
     * @notice Update the payout address fees are sent to.
     * @dev Callable by OWNER_ROLE.
     */
    function updatePayoutAddress(address payoutAddress) external requiresAuth {
        address oldPayout = accountantState.payoutAddress;
        accountantState.payoutAddress = payoutAddress;
        emit PayoutAddressUpdated(oldPayout, payoutAddress);
    }

    /**
     * @notice Update the rate provider data for a specific `asset`.
     * @dev Rate providers must return rates in terms of `base` or
     * an asset pegged to base and they must use the same decimals
     * as `asset`.
     * @dev Callable by OWNER_ROLE.
     */
    function setRateProviderData(ERC20 asset, bool isPeggedToBase, address rateProvider) external requiresAuth {
        rateProviderData[asset] =
            RateProviderData({isPeggedToBase: isPeggedToBase, rateProvider: IRateProvider(rateProvider)});
        emit RateProviderUpdated(address(asset), isPeggedToBase, rateProvider);
    }

    // ========================================= UPDATE EXCHANGE RATE/FEES FUNCTIONS =========================================

    /**
     * @notice Updates this contract exchangeRate.
     * @dev If new exchange rate is outside of accepted bounds, or if not enough time has passed, this
     *      will pause the contract, and this function will NOT calculate fees owed.
     * @dev Callable by UPDATE_EXCHANGE_RATE_ROLE.
     */
    function updateExchangeRate(uint96 newExchangeRate) external requiresAuth {
        AccountantState storage state = accountantState;
        if (state.isPaused) revert AccountantWithRateProviders__Paused();
        uint64 currentTime = uint64(block.timestamp);
        uint256 currentExchangeRate = state.exchangeRate;
        uint256 currentTotalShares = vault.totalSupply();
        if (
            currentTime < state.lastUpdateTimestamp + state.minimumUpdateDelayInSeconds
                || newExchangeRate > currentExchangeRate.mulDivDown(state.allowedExchangeRateChangeUpper, 1e4)
                || newExchangeRate < currentExchangeRate.mulDivDown(state.allowedExchangeRateChangeLower, 1e4)
        ) {
            // Instead of reverting, pause the contract. This way the exchange rate updater is able to update the exchange rate
            // to a better value, and pause it.
            state.isPaused = true;
        } else {
            // Only update fees if we are not paused.
            // Update fee accounting.
            uint256 shareSupplyToUse = currentTotalShares;
            // Use the minimum between current total supply and total supply for last update.
            if (state.totalSharesLastUpdate < shareSupplyToUse) {
                shareSupplyToUse = state.totalSharesLastUpdate;
            }

            // Determine management fees owned.
            uint256 timeDelta = currentTime - state.lastUpdateTimestamp;
            uint256 minimumAssets = newExchangeRate > currentExchangeRate
                ? shareSupplyToUse.mulDivDown(currentExchangeRate, ONE_SHARE)
                : shareSupplyToUse.mulDivDown(newExchangeRate, ONE_SHARE);
            uint256 managementFeesAnnual = minimumAssets.mulDivDown(state.managementFee, 1e4);
            uint256 newFeesOwedInBase = managementFeesAnnual.mulDivDown(timeDelta, 365 days);

            state.feesOwedInBase += uint128(newFeesOwedInBase);
        }

        state.exchangeRate = newExchangeRate;
        state.totalSharesLastUpdate = uint128(currentTotalShares);
        state.lastUpdateTimestamp = currentTime;

        emit ExchangeRateUpdated(uint96(currentExchangeRate), newExchangeRate, currentTime);
    }

    /**
     * @notice Claim pending fees.
     * @dev This function must be called by the BoringVault.
     * @dev This function will lose precision if the exchange rate
     *      decimals is greater than the feeAsset's decimals.
     */
    function claimFees(ERC20 feeAsset) external {
        if (msg.sender != address(vault)) revert AccountantWithRateProviders__OnlyCallableByBoringVault();

        AccountantState storage state = accountantState;
        if (state.isPaused) revert AccountantWithRateProviders__Paused();
        if (state.feesOwedInBase == 0) revert AccountantWithRateProviders__ZeroFeesOwed();

        // Determine amount of fees owed in feeAsset.
        uint256 feesOwedInFeeAsset;
        RateProviderData memory data = rateProviderData[feeAsset];
        if (address(feeAsset) == address(base)) {
            feesOwedInFeeAsset = state.feesOwedInBase;
        } else {
            uint8 feeAssetDecimals = ERC20(feeAsset).decimals();
            uint256 feesOwedInBaseUsingFeeAssetDecimals =
                changeDecimals(state.feesOwedInBase, decimals, feeAssetDecimals);
            if (data.isPeggedToBase) {
                feesOwedInFeeAsset = feesOwedInBaseUsingFeeAssetDecimals;
            } else {
                uint256 rate = data.rateProvider.getRate();
                feesOwedInFeeAsset = feesOwedInBaseUsingFeeAssetDecimals.mulDivDown(10 ** feeAssetDecimals, rate);
            }
        }
        // Zero out fees owed.
        state.feesOwedInBase = 0;
        // Transfer fee asset to payout address.
        feeAsset.safeTransferFrom(msg.sender, state.payoutAddress, feesOwedInFeeAsset);

        emit FeesClaimed(address(feeAsset), feesOwedInFeeAsset);
    }

    // ========================================= RATE FUNCTIONS =========================================

    /**
     * @notice Get this BoringVault's current rate in the base.
     */
    function getRate() public view returns (uint256 rate) {
        rate = accountantState.exchangeRate;
    }

    /**
     * @notice Get this BoringVault's current rate in the base.
     * @dev Revert if paused.
     */
    function getRateSafe() external view returns (uint256 rate) {
        if (accountantState.isPaused) revert AccountantWithRateProviders__Paused();
        rate = getRate();
    }

    /**
     * @notice Get this BoringVault's current rate in the provided quote.
     * @dev `quote` must have its RateProviderData set, else this will revert.
     * @dev This function will lose precision if the exchange rate
     *      decimals is greater than the quote's decimals.
     */
    function getRateInQuote(ERC20 quote) public view returns (uint256 rateInQuote) {
        if (address(quote) == address(base)) {
            rateInQuote = accountantState.exchangeRate;
        } else {
            RateProviderData memory data = rateProviderData[quote];
            uint8 quoteDecimals = ERC20(quote).decimals();
            uint256 exchangeRateInQuoteDecimals = changeDecimals(accountantState.exchangeRate, decimals, quoteDecimals);
            if (data.isPeggedToBase) {
                rateInQuote = exchangeRateInQuoteDecimals;
            } else {
                uint256 quoteRate = data.rateProvider.getRate();
                uint256 oneQuote = 10 ** quoteDecimals;
                rateInQuote = oneQuote.mulDivDown(exchangeRateInQuoteDecimals, quoteRate);
            }
        }
    }

    /**
     * @notice Get this BoringVault's current rate in the provided quote.
     * @dev `quote` must have its RateProviderData set, else this will revert.
     * @dev Revert if paused.
     */
    function getRateInQuoteSafe(ERC20 quote) external view returns (uint256 rateInQuote) {
        if (accountantState.isPaused) revert AccountantWithRateProviders__Paused();
        rateInQuote = getRateInQuote(quote);
    }

    // ========================================= INTERNAL HELPER FUNCTIONS =========================================
    /**
     * @notice Used to change the decimals of precision used for an amount.
     */
    function changeDecimals(uint256 amount, uint8 fromDecimals, uint8 toDecimals) internal pure returns (uint256) {
        if (fromDecimals == toDecimals) {
            return amount;
        } else if (fromDecimals < toDecimals) {
            return amount * 10 ** (toDecimals - fromDecimals);
        } else {
            return amount / 10 ** (fromDecimals - toDecimals);
        }
    }
}

// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;

/// @notice Arithmetic library with operations for fixed-point numbers.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/utils/FixedPointMathLib.sol)
/// @author Inspired by USM (https://github.com/usmfum/USM/blob/master/contracts/WadMath.sol)
library FixedPointMathLib {
    /*//////////////////////////////////////////////////////////////
                    SIMPLIFIED FIXED POINT OPERATIONS
    //////////////////////////////////////////////////////////////*/

    uint256 internal constant MAX_UINT256 = 2**256 - 1;

    uint256 internal constant WAD = 1e18; // The scalar of ETH and most ERC20s.

    function mulWadDown(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivDown(x, y, WAD); // Equivalent to (x * y) / WAD rounded down.
    }

    function mulWadUp(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivUp(x, y, WAD); // Equivalent to (x * y) / WAD rounded up.
    }

    function divWadDown(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivDown(x, WAD, y); // Equivalent to (x * WAD) / y rounded down.
    }

    function divWadUp(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivUp(x, WAD, y); // Equivalent to (x * WAD) / y rounded up.
    }

    /*//////////////////////////////////////////////////////////////
                    LOW LEVEL FIXED POINT OPERATIONS
    //////////////////////////////////////////////////////////////*/

    function mulDivDown(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 z) {
        /// @solidity memory-safe-assembly
        assembly {
            // Equivalent to require(denominator != 0 && (y == 0 || x <= type(uint256).max / y))
            if iszero(mul(denominator, iszero(mul(y, gt(x, div(MAX_UINT256, y)))))) {
                revert(0, 0)
            }

            // Divide x * y by the denominator.
            z := div(mul(x, y), denominator)
        }
    }

    function mulDivUp(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 z) {
        /// @solidity memory-safe-assembly
        assembly {
            // Equivalent to require(denominator != 0 && (y == 0 || x <= type(uint256).max / y))
            if iszero(mul(denominator, iszero(mul(y, gt(x, div(MAX_UINT256, y)))))) {
                revert(0, 0)
            }

            // If x * y modulo the denominator is strictly greater than 0,
            // 1 is added to round up the division of x * y by the denominator.
            z := add(gt(mod(mul(x, y), denominator), 0), div(mul(x, y), denominator))
        }
    }

    function rpow(
        uint256 x,
        uint256 n,
        uint256 scalar
    ) internal pure returns (uint256 z) {
        /// @solidity memory-safe-assembly
        assembly {
            switch x
            case 0 {
                switch n
                case 0 {
                    // 0 ** 0 = 1
                    z := scalar
                }
                default {
                    // 0 ** n = 0
                    z := 0
                }
            }
            default {
                switch mod(n, 2)
                case 0 {
                    // If n is even, store scalar in z for now.
                    z := scalar
                }
                default {
                    // If n is odd, store x in z for now.
                    z := x
                }

                // Shifting right by 1 is like dividing by 2.
                let half := shr(1, scalar)

                for {
                    // Shift n right by 1 before looping to halve it.
                    n := shr(1, n)
                } n {
                    // Shift n right by 1 each iteration to halve it.
                    n := shr(1, n)
                } {
                    // Revert immediately if x ** 2 would overflow.
                    // Equivalent to iszero(eq(div(xx, x), x)) here.
                    if shr(128, x) {
                        revert(0, 0)
                    }

                    // Store x squared.
                    let xx := mul(x, x)

                    // Round to the nearest number.
                    let xxRound := add(xx, half)

                    // Revert if xx + half overflowed.
                    if lt(xxRound, xx) {
                        revert(0, 0)
                    }

                    // Set x to scaled xxRound.
                    x := div(xxRound, scalar)

                    // If n is even:
                    if mod(n, 2) {
                        // Compute z * x.
                        let zx := mul(z, x)

                        // If z * x overflowed:
                        if iszero(eq(div(zx, x), z)) {
                            // Revert if x is non-zero.
                            if iszero(iszero(x)) {
                                revert(0, 0)
                            }
                        }

                        // Round to the nearest number.
                        let zxRound := add(zx, half)

                        // Revert if zx + half overflowed.
                        if lt(zxRound, zx) {
                            revert(0, 0)
                        }

                        // Return properly scaled zxRound.
                        z := div(zxRound, scalar)
                    }
                }
            }
        }
    }

    /*//////////////////////////////////////////////////////////////
                        GENERAL NUMBER UTILITIES
    //////////////////////////////////////////////////////////////*/

    function sqrt(uint256 x) internal pure returns (uint256 z) {
        /// @solidity memory-safe-assembly
        assembly {
            let y := x // We start y at x, which will help us make our initial estimate.

            z := 181 // The "correct" value is 1, but this saves a multiplication later.

            // This segment is to get a reasonable initial estimate for the Babylonian method. With a bad
            // start, the correct # of bits increases ~linearly each iteration instead of ~quadratically.

            // We check y >= 2^(k + 8) but shift right by k bits
            // each branch to ensure that if x >= 256, then y >= 256.
            if iszero(lt(y, 0x10000000000000000000000000000000000)) {
                y := shr(128, y)
                z := shl(64, z)
            }
            if iszero(lt(y, 0x1000000000000000000)) {
                y := shr(64, y)
                z := shl(32, z)
            }
            if iszero(lt(y, 0x10000000000)) {
                y := shr(32, y)
                z := shl(16, z)
            }
            if iszero(lt(y, 0x1000000)) {
                y := shr(16, y)
                z := shl(8, z)
            }

            // Goal was to get z*z*y within a small factor of x. More iterations could
            // get y in a tighter range. Currently, we will have y in [256, 256*2^16).
            // We ensured y >= 256 so that the relative difference between y and y+1 is small.
            // That's not possible if x < 256 but we can just verify those cases exhaustively.

            // Now, z*z*y <= x < z*z*(y+1), and y <= 2^(16+8), and either y >= 256, or x < 256.
            // Correctness can be checked exhaustively for x < 256, so we assume y >= 256.
            // Then z*sqrt(y) is within sqrt(257)/sqrt(256) of sqrt(x), or about 20bps.

            // For s in the range [1/256, 256], the estimate f(s) = (181/1024) * (s+1) is in the range
            // (1/2.84 * sqrt(s), 2.84 * sqrt(s)), with largest error when s = 1 and when s = 256 or 1/256.

            // Since y is in [256, 256*2^16), let a = y/65536, so that a is in [1/256, 256). Then we can estimate
            // sqrt(y) using sqrt(65536) * 181/1024 * (a + 1) = 181/4 * (y + 65536)/65536 = 181 * (y + 65536)/2^18.

            // There is no overflow risk here since y < 2^136 after the first branch above.
            z := shr(18, mul(z, add(y, 65536))) // A mul() is saved from starting z at 181.

            // Given the worst case multiplicative error of 2.84 above, 7 iterations should be enough.
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))

            // If x+1 is a perfect square, the Babylonian method cycles between
            // floor(sqrt(x)) and ceil(sqrt(x)). This statement ensures we return floor.
            // See: https://en.wikipedia.org/wiki/Integer_square_root#Using_only_integer_division
            // Since the ceil is rare, we save gas on the assignment and repeat division in the rare case.
            // If you don't care whether the floor or ceil square root is returned, you can remove this statement.
            z := sub(z, lt(div(x, z), z))
        }
    }

    function unsafeMod(uint256 x, uint256 y) internal pure returns (uint256 z) {
        /// @solidity memory-safe-assembly
        assembly {
            // Mod x by y. Note this will return
            // 0 instead of reverting if y is zero.
            z := mod(x, y)
        }
    }

    function unsafeDiv(uint256 x, uint256 y) internal pure returns (uint256 r) {
        /// @solidity memory-safe-assembly
        assembly {
            // Divide x by y. Note this will return
            // 0 instead of reverting if y is zero.
            r := div(x, y)
        }
    }

    function unsafeDivUp(uint256 x, uint256 y) internal pure returns (uint256 z) {
        /// @solidity memory-safe-assembly
        assembly {
            // Add 1 to x * y if x % y > 0. Note this will
            // return 0 instead of reverting if y is zero.
            z := add(gt(mod(x, y), 0), div(x, y))
        }
    }
}

// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;

import {ERC20} from "../tokens/ERC20.sol";

/// @notice Safe ETH and ERC20 transfer library that gracefully handles missing return values.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/utils/SafeTransferLib.sol)
/// @dev Use with caution! Some functions in this library knowingly create dirty bits at the destination of the free memory pointer.
/// @dev Note that none of the functions in this library check that a token has code at all! That responsibility is delegated to the caller.
library SafeTransferLib {
    /*//////////////////////////////////////////////////////////////
                             ETH OPERATIONS
    //////////////////////////////////////////////////////////////*/

    function safeTransferETH(address to, uint256 amount) internal {
        bool success;

        /// @solidity memory-safe-assembly
        assembly {
            // Transfer the ETH and store if it succeeded or not.
            success := call(gas(), to, amount, 0, 0, 0, 0)
        }

        require(success, "ETH_TRANSFER_FAILED");
    }

    /*//////////////////////////////////////////////////////////////
                            ERC20 OPERATIONS
    //////////////////////////////////////////////////////////////*/

    function safeTransferFrom(
        ERC20 token,
        address from,
        address to,
        uint256 amount
    ) internal {
        bool success;

        /// @solidity memory-safe-assembly
        assembly {
            // Get a pointer to some free memory.
            let freeMemoryPointer := mload(0x40)

            // Write the abi-encoded calldata into memory, beginning with the function selector.
            mstore(freeMemoryPointer, 0x23b872dd00000000000000000000000000000000000000000000000000000000)
            mstore(add(freeMemoryPointer, 4), and(from, 0xffffffffffffffffffffffffffffffffffffffff)) // Append and mask the "from" argument.
            mstore(add(freeMemoryPointer, 36), and(to, 0xffffffffffffffffffffffffffffffffffffffff)) // Append and mask the "to" argument.
            mstore(add(freeMemoryPointer, 68), amount) // Append the "amount" argument. Masking not required as it's a full 32 byte type.

            success := and(
                // Set success to whether the call reverted, if not we check it either
                // returned exactly 1 (can't just be non-zero data), or had no return data.
                or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
                // We use 100 because the length of our calldata totals up like so: 4 + 32 * 3.
                // We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
                // Counterintuitively, this call must be positioned second to the or() call in the
                // surrounding and() call or else returndatasize() will be zero during the computation.
                call(gas(), token, 0, freeMemoryPointer, 100, 0, 32)
            )
        }

        require(success, "TRANSFER_FROM_FAILED");
    }

    function safeTransfer(
        ERC20 token,
        address to,
        uint256 amount
    ) internal {
        bool success;

        /// @solidity memory-safe-assembly
        assembly {
            // Get a pointer to some free memory.
            let freeMemoryPointer := mload(0x40)

            // Write the abi-encoded calldata into memory, beginning with the function selector.
            mstore(freeMemoryPointer, 0xa9059cbb00000000000000000000000000000000000000000000000000000000)
            mstore(add(freeMemoryPointer, 4), and(to, 0xffffffffffffffffffffffffffffffffffffffff)) // Append and mask the "to" argument.
            mstore(add(freeMemoryPointer, 36), amount) // Append the "amount" argument. Masking not required as it's a full 32 byte type.

            success := and(
                // Set success to whether the call reverted, if not we check it either
                // returned exactly 1 (can't just be non-zero data), or had no return data.
                or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
                // We use 68 because the length of our calldata totals up like so: 4 + 32 * 2.
                // We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
                // Counterintuitively, this call must be positioned second to the or() call in the
                // surrounding and() call or else returndatasize() will be zero during the computation.
                call(gas(), token, 0, freeMemoryPointer, 68, 0, 32)
            )
        }

        require(success, "TRANSFER_FAILED");
    }

    function safeApprove(
        ERC20 token,
        address to,
        uint256 amount
    ) internal {
        bool success;

        /// @solidity memory-safe-assembly
        assembly {
            // Get a pointer to some free memory.
            let freeMemoryPointer := mload(0x40)

            // Write the abi-encoded calldata into memory, beginning with the function selector.
            mstore(freeMemoryPointer, 0x095ea7b300000000000000000000000000000000000000000000000000000000)
            mstore(add(freeMemoryPointer, 4), and(to, 0xffffffffffffffffffffffffffffffffffffffff)) // Append and mask the "to" argument.
            mstore(add(freeMemoryPointer, 36), amount) // Append the "amount" argument. Masking not required as it's a full 32 byte type.

            success := and(
                // Set success to whether the call reverted, if not we check it either
                // returned exactly 1 (can't just be non-zero data), or had no return data.
                or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
                // We use 68 because the length of our calldata totals up like so: 4 + 32 * 2.
                // We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
                // Counterintuitively, this call must be positioned second to the or() call in the
                // surrounding and() call or else returndatasize() will be zero during the computation.
                call(gas(), token, 0, freeMemoryPointer, 68, 0, 32)
            )
        }

        require(success, "APPROVE_FAILED");
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;

interface BeforeTransferHook {
    function beforeTransfer(address from) external view;
}

// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;

/// @notice Provides a flexible and updatable auth pattern which is completely separate from application logic.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/auth/Auth.sol)
/// @author Modified from Dappsys (https://github.com/dapphub/ds-auth/blob/master/src/auth.sol)
abstract contract Auth {
    event OwnershipTransferred(address indexed user, address indexed newOwner);

    event AuthorityUpdated(address indexed user, Authority indexed newAuthority);

    address public owner;

    Authority public authority;

    constructor(address _owner, Authority _authority) {
        owner = _owner;
        authority = _authority;

        emit OwnershipTransferred(msg.sender, _owner);
        emit AuthorityUpdated(msg.sender, _authority);
    }

    modifier requiresAuth() virtual {
        require(isAuthorized(msg.sender, msg.sig), "UNAUTHORIZED");

        _;
    }

    function isAuthorized(address user, bytes4 functionSig) internal view virtual returns (bool) {
        Authority auth = authority; // Memoizing authority saves us a warm SLOAD, around 100 gas.

        // Checking if the caller is the owner only after calling the authority saves gas in most cases, but be
        // aware that this makes protected functions uncallable even to the owner if the authority is out of order.
        return (address(auth) != address(0) && auth.canCall(user, address(this), functionSig)) || user == owner;
    }

    function setAuthority(Authority newAuthority) public virtual {
        // We check if the caller is the owner first because we want to ensure they can
        // always swap out the authority even if it's reverting or using up a lot of gas.
        require(msg.sender == owner || authority.canCall(msg.sender, address(this), msg.sig));

        authority = newAuthority;

        emit AuthorityUpdated(msg.sender, newAuthority);
    }

    function transferOwnership(address newOwner) public virtual requiresAuth {
        owner = newOwner;

        emit OwnershipTransferred(msg.sender, newOwner);
    }
}

/// @notice A generic interface for a contract which provides authorization data to an Auth instance.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/auth/Auth.sol)
/// @author Modified from Dappsys (https://github.com/dapphub/ds-auth/blob/master/src/auth.sol)
interface Authority {
    function canCall(
        address user,
        address target,
        bytes4 functionSig
    ) external view returns (bool);
}

// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;

/// @notice Gas optimized reentrancy protection for smart contracts.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/utils/ReentrancyGuard.sol)
/// @author Modified from OpenZeppelin (https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/security/ReentrancyGuard.sol)
abstract contract ReentrancyGuard {
    uint256 private locked = 1;

    modifier nonReentrant() virtual {
        require(locked == 1, "REENTRANCY");

        locked = 2;

        _;

        locked = 1;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/utils/ERC721Holder.sol)

pragma solidity ^0.8.20;

import {IERC721Receiver} from "../IERC721Receiver.sol";

/**
 * @dev Implementation of the {IERC721Receiver} interface.
 *
 * Accepts all token transfers.
 * Make sure the contract is able to use its token with {IERC721-safeTransferFrom}, {IERC721-approve} or
 * {IERC721-setApprovalForAll}.
 */
abstract contract ERC721Holder is IERC721Receiver {
    /**
     * @dev See {IERC721Receiver-onERC721Received}.
     *
     * Always returns `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(address, address, uint256, bytes memory) public virtual returns (bytes4) {
        return this.onERC721Received.selector;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC1155/utils/ERC1155Holder.sol)

pragma solidity ^0.8.20;

import {IERC165, ERC165} from "../../../utils/introspection/ERC165.sol";
import {IERC1155Receiver} from "../IERC1155Receiver.sol";

/**
 * @dev Simple implementation of `IERC1155Receiver` that will allow a contract to hold ERC1155 tokens.
 *
 * IMPORTANT: When inheriting this contract, you must include a way to use the received tokens, otherwise they will be
 * stuck.
 */
abstract contract ERC1155Holder is ERC165, IERC1155Receiver {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return interfaceId == type(IERC1155Receiver).interfaceId || super.supportsInterface(interfaceId);
    }

    function onERC1155Received(
        address,
        address,
        uint256,
        uint256,
        bytes memory
    ) public virtual override returns (bytes4) {
        return this.onERC1155Received.selector;
    }

    function onERC1155BatchReceived(
        address,
        address,
        uint256[] memory,
        uint256[] memory,
        bytes memory
    ) public virtual override returns (bytes4) {
        return this.onERC1155BatchReceived.selector;
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.8.0;

interface IRateProvider {
    function getRate() external view returns (uint256);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.20;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be
     * reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)

pragma solidity ^0.8.20;

import {IERC165} from "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC1155/IERC1155Receiver.sol)

pragma solidity ^0.8.20;

import {IERC165} from "../../utils/introspection/IERC165.sol";

/**
 * @dev Interface that must be implemented by smart contracts in order to receive
 * ERC-1155 token transfers.
 */
interface IERC1155Receiver is IERC165 {
    /**
     * @dev Handles the receipt of a single ERC1155 token type. This function is
     * called at the end of a `safeTransferFrom` after the balance has been updated.
     *
     * NOTE: To accept the transfer, this must return
     * `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
     * (i.e. 0xf23a6e61, or its own function selector).
     *
     * @param operator The address which initiated the transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param id The ID of the token being transferred
     * @param value The amount of tokens being transferred
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
     */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);

    /**
     * @dev Handles the receipt of a multiple ERC1155 token types. This function
     * is called at the end of a `safeBatchTransferFrom` after the balances have
     * been updated.
     *
     * NOTE: To accept the transfer(s), this must return
     * `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
     * (i.e. 0xbc197c81, or its own function selector).
     *
     * @param operator The address which initiated the batch transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param ids An array containing ids of each token being transferred (order and length must match values array)
     * @param values An array containing amounts of each token being transferred (order and length must match ids array)
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
     */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

{
  "remappings": [
    "@solmate/=lib/solmate/src/",
    "@forge-std/=lib/forge-std/src/",
    "@ds-test/=lib/forge-std/lib/ds-test/src/",
    "ds-test/=lib/forge-std/lib/ds-test/src/",
    "@openzeppelin/=lib/openzeppelin-contracts/",
    "@openzeppelin/contracts/=lib/openzeppelin-contracts/contracts/",
    "erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
    "forge-std/=lib/forge-std/src/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/",
    "solmate/=lib/solmate/src/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  },
  "evmVersion": "shanghai",
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_owner","type":"address"},{"internalType":"address","name":"_vault","type":"address"},{"internalType":"address","name":"_accountant","type":"address"},{"internalType":"address","name":"_weth","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"TellerWithMultiAssetSupport__AssetNotSupported","type":"error"},{"inputs":[],"name":"TellerWithMultiAssetSupport__BadDepositHash","type":"error"},{"inputs":[],"name":"TellerWithMultiAssetSupport__DualDeposit","type":"error"},{"inputs":[],"name":"TellerWithMultiAssetSupport__MinimumAssetsNotMet","type":"error"},{"inputs":[],"name":"TellerWithMultiAssetSupport__MinimumMintNotMet","type":"error"},{"inputs":[],"name":"TellerWithMultiAssetSupport__Paused","type":"error"},{"inputs":[],"name":"TellerWithMultiAssetSupport__PermitFailedAndAllowanceTooLow","type":"error"},{"inputs":[],"name":"TellerWithMultiAssetSupport__ShareLockPeriodTooLong","type":"error"},{"inputs":[],"name":"TellerWithMultiAssetSupport__SharesAreLocked","type":"error"},{"inputs":[],"name":"TellerWithMultiAssetSupport__SharesAreUnLocked","type":"error"},{"inputs":[],"name":"TellerWithMultiAssetSupport__ZeroAssets","type":"error"},{"inputs":[],"name":"TellerWithMultiAssetSupport__ZeroShares","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"asset","type":"address"}],"name":"AssetAdded","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"asset","type":"address"}],"name":"AssetRemoved","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"contract Authority","name":"newAuthority","type":"address"}],"name":"AuthorityUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"asset","type":"address"},{"indexed":false,"internalType":"uint256","name":"depositAmount","type":"uint256"}],"name":"BulkDeposit","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"asset","type":"address"},{"indexed":false,"internalType":"uint256","name":"shareAmount","type":"uint256"}],"name":"BulkWithdraw","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"nonce","type":"uint256"},{"indexed":true,"internalType":"address","name":"receiver","type":"address"},{"indexed":true,"internalType":"address","name":"depositAsset","type":"address"},{"indexed":false,"internalType":"uint256","name":"depositAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"shareAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"depositTimestamp","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"shareLockPeriodAtTimeOfDeposit","type":"uint256"}],"name":"Deposit","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"nonce","type":"uint256"},{"indexed":false,"internalType":"bytes32","name":"depositHash","type":"bytes32"},{"indexed":true,"internalType":"address","name":"user","type":"address"}],"name":"DepositRefunded","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[],"name":"Paused","type":"event"},{"anonymous":false,"inputs":[],"name":"Unpaused","type":"event"},{"inputs":[],"name":"accountant","outputs":[{"internalType":"contract AccountantWithRateProviders","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract ERC20","name":"asset","type":"address"}],"name":"addAsset","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"authority","outputs":[{"internalType":"contract Authority","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"}],"name":"beforeTransfer","outputs":[],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract ERC20","name":"depositAsset","type":"address"},{"internalType":"uint256","name":"depositAmount","type":"uint256"},{"internalType":"uint256","name":"minimumMint","type":"uint256"},{"internalType":"address","name":"to","type":"address"}],"name":"bulkDeposit","outputs":[{"internalType":"uint256","name":"shares","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract ERC20","name":"withdrawAsset","type":"address"},{"internalType":"uint256","name":"shareAmount","type":"uint256"},{"internalType":"uint256","name":"minimumAssets","type":"uint256"},{"internalType":"address","name":"to","type":"address"}],"name":"bulkWithdraw","outputs":[{"internalType":"uint256","name":"assetsOut","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract ERC20","name":"depositAsset","type":"address"},{"internalType":"uint256","name":"depositAmount","type":"uint256"},{"internalType":"uint256","name":"minimumMint","type":"uint256"}],"name":"deposit","outputs":[{"internalType":"uint256","name":"shares","type":"uint256"}],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"depositNonce","outputs":[{"internalType":"uint96","name":"","type":"uint96"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract ERC20","name":"depositAsset","type":"address"},{"internalType":"uint256","name":"depositAmount","type":"uint256"},{"internalType":"uint256","name":"minimumMint","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"},{"internalType":"uint8","name":"v","type":"uint8"},{"internalType":"bytes32","name":"r","type":"bytes32"},{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"depositWithPermit","outputs":[{"internalType":"uint256","name":"shares","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"isPaused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract ERC20","name":"","type":"address"}],"name":"isSupported","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"nativeWrapper","outputs":[{"internalType":"contract WETH","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"publicDepositHistory","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"nonce","type":"uint256"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"address","name":"depositAsset","type":"address"},{"internalType":"uint256","name":"depositAmount","type":"uint256"},{"internalType":"uint256","name":"shareAmount","type":"uint256"},{"internalType":"uint256","name":"depositTimestamp","type":"uint256"},{"internalType":"uint256","name":"shareLockUpPeriodAtTimeOfDeposit","type":"uint256"}],"name":"refundDeposit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract ERC20","name":"asset","type":"address"}],"name":"removeAsset","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract Authority","name":"newAuthority","type":"address"}],"name":"setAuthority","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint64","name":"_shareLockPeriod","type":"uint64"}],"name":"setShareLockPeriod","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"shareLockPeriod","outputs":[{"internalType":"uint64","name":"","type":"uint64"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"shareUnlockTime","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"unpause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"vault","outputs":[{"internalType":"contract BoringVault","name":"","type":"address"}],"stateMutability":"view","type":"function"}]

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

0000000000000000000000002322ba43eff1542b6a7baed35e66099ea0d12bd100000000000000000000000008c6f91e2b681faf5e17227f2a44c307b3c1364c000000000000000000000000c315d6e14ddcdc7407784e2caf815d131bc1d3e7000000000000000000000000c02aaa39b223fe8d0a0e5c4f27ead9083c756cc2

-----Decoded View---------------
Arg [0] : _owner (address): 0x2322ba43eFF1542b6A7bAeD35e66099Ea0d12Bd1
Arg [1] : _vault (address): 0x08c6F91e2B681FaF5e17227F2a44C307b3C1364C
Arg [2] : _accountant (address): 0xc315D6e14DDCDC7407784e2Caf815d131Bc1D3E7
Arg [3] : _weth (address): 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2

-----Encoded View---------------
4 Constructor Arguments found :
Arg [0] : 0000000000000000000000002322ba43eff1542b6a7baed35e66099ea0d12bd1
Arg [1] : 00000000000000000000000008c6f91e2b681faf5e17227f2a44c307b3c1364c
Arg [2] : 000000000000000000000000c315d6e14ddcdc7407784e2caf815d131bc1d3e7
Arg [3] : 000000000000000000000000c02aaa39b223fe8d0a0e5c4f27ead9083c756cc2

638:14086:15:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;4317:35;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;199:32:18;;;181:51;;169:2;154:18;4317:35:15;;;;;;;;9523:1313;;;;;;:::i;:::-;;:::i;:::-;;;941:25:18;;;929:2;914:18;9523:1313:15;795:177:18;6628:242:15;;;;;;;;;;-1:-1:-1;6628:242:15;;;;;:::i;:::-;;:::i;:::-;;2246:50;;;;;;;;;;-1:-1:-1;2246:50:15;;;;;:::i;:::-;;;;;;;;;;;;;;5531:136;;;;;;;;;;-1:-1:-1;5531:136:15;;;;;:::i;:::-;;:::i;10959:926::-;;;;;;;;;;-1:-1:-1;10959:926:15;;;;;:::i;:::-;;:::i;12623:701::-;;;;;;;;;;-1:-1:-1;12623:701:15;;;;;:::i;:::-;;:::i;5221:99::-;;;;;;;;;;;;;:::i;7969:1301::-;;;;;;;;;;-1:-1:-1;7969:1301:15;;;;;:::i;:::-;;:::i;5779:142::-;;;;;;;;;;-1:-1:-1;5779:142:15;;;;;:::i;:::-;;:::i;1434:41::-;;;;;;;;;;-1:-1:-1;1434:41:15;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;4054:14:18;;4047:22;4029:41;;4017:2;4002:18;1434:41:15;3889:187:18;4091:55:15;;;;;;;;;;;;;;;1523:434:7;;;;;;;;;;-1:-1:-1;1523:434:7;;;;;:::i;:::-;;:::i;4964:94:15:-;;;;;;;;;;;;;:::i;562:20:7:-;;;;;;;;;;-1:-1:-1;562:20:7;;;;-1:-1:-1;;;;;562:20:7;;;2184:55:15;;;;;;;;;;-1:-1:-1;2184:55:15;;;;;:::i;:::-;;;;;;;;;;;;;;12056:440;;;;;;;;;;-1:-1:-1;12056:440:15;;;;;:::i;:::-;;:::i;1843:29::-;;;;;;;;;;-1:-1:-1;1843:29:15;;;;-1:-1:-1;;;1843:29:15;;;;;;;;;5350:18:18;5338:31;;;5320:50;;5308:2;5293:18;1843:29:15;5176:200:18;1968:20:15;;;;;;;;;;-1:-1:-1;1968:20:15;;;;-1:-1:-1;;;1968:20:15;;;;;;589:26:7;;;;;;;;;;-1:-1:-1;589:26:7;;;;-1:-1:-1;;;;;589:26:7;;;1562:30:15;;;;;;;;;;-1:-1:-1;1562:30:15;;;;-1:-1:-1;;;;;1562:30:15;;;;;;-1:-1:-1;;;;;5768:39:18;;;5750:58;;5738:2;5723:18;1562:30:15;5606:208:18;7089:168:15;;;;;;;;;;-1:-1:-1;7089:168:15;;;;;:::i;:::-;;:::i;1963:164:7:-;;;;;;;;;;-1:-1:-1;1963:164:7;;;;;:::i;:::-;;:::i;3956:34:15:-;;;;;;;;;;;;;;;9523:1313;9696:14;902:33:7;915:10;927:7;;-1:-1:-1;;;;;;927:7:7;902:12;:33::i;:::-;894:58;;;;-1:-1:-1;;;894:58:7;;;;;;;:::i;:::-;;;;;;;;;512:6:11::1;;522:1;512:11;504:34;;;;-1:-1:-1::0;;;504:34:11::1;;;;;;;:::i;:::-;558:1;549:10:::0;;9730:8:15::2;::::0;-1:-1:-1;;;9730:8:15;::::2;;;9726:58;;;9747:37;;-1:-1:-1::0;;;9747:37:15::2;;;;;;;;;;;9726:58;-1:-1:-1::0;;;;;9799:25:15;::::2;;::::0;;;:11:::2;:25;::::0;;;;;::::2;;9794:87;;9833:48;;-1:-1:-1::0;;;9833:48:15::2;;;;;;;;;;;9794:87;-1:-1:-1::0;;;;;;;9896:31:15;::::2;::::0;9892:842:::2;;9947:9;9960:1;9947:14:::0;9943:68:::2;;9970:41;;-1:-1:-1::0;;;9970:41:15::2;;;;;;;;;;;9943:68;10025:13;-1:-1:-1::0;;;;;10025:21:15::2;;10054:9;10025:41;;;;;;;;;;;;;;;;;;;;;;;;;;;;::::0;::::2;;;;;;;;;;;;::::0;::::2;;;;;-1:-1:-1::0;;10164:44:15::2;::::0;-1:-1:-1;;;10164:44:15;;-1:-1:-1;;;;;10194:13:15::2;199:32:18::0;;10164:44:15::2;::::0;::::2;181:51:18::0;10096:9:15::2;::::0;-1:-1:-1;10128:81:15::2;::::0;-1:-1:-1;10153:9:15::2;::::0;-1:-1:-1;10164:10:15::2;:29;::::0;-1:-1:-1;10164:29:15::2;::::0;154:18:18;;10164:44:15::2;;;;;;;;;;;;;;;;;::::0;::::2;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;10128:13:::0;;:81;:24:::2;:81::i;:::-;10119:90;;10236:11;10227:6;:20;10223:81;;;10256:48;;-1:-1:-1::0;;;10256:48:15::2;;;;;;;;;;;10223:81;10388:56;-1:-1:-1::0;;;;;10388:13:15::2;:25;10422:5;10430:13:::0;10388:25:::2;:56::i;:::-;10458:76;::::0;-1:-1:-1;;;10458:76:15;;-1:-1:-1;;;;;10458:5:15::2;:11;::::0;::::2;::::0;:76:::2;::::0;10478:4:::2;::::0;10485:13:::2;::::0;10500;;10515:10:::2;::::0;10527:6;;10458:76:::2;;;:::i;:::-;;;;;;;;;;;;;;;;;;::::0;::::2;;;;;;;;;;;;::::0;::::2;;;;;;;;;9892:842;;;10569:9;:13:::0;10565:68:::2;;10591:42;;-1:-1:-1::0;;;10591:42:15::2;;;;;;;;;;;10565:68;10656:67;10670:12;10684:13;10699:11;10712:10;10656:13;:67::i;:::-;10647:76;;9892:842;10744:85;10764:10;10776:12;10790:13;10805:6;10813:15;;;;;;;;;;;10744:85;;:19;:85::i;:::-;591:1:11::1;582:6;:10:::0;9523:1313:15;;-1:-1:-1;;;9523:1313:15:o;6628:242::-;902:33:7;915:10;927:7;;-1:-1:-1;;;;;;927:7:7;902:12;:33::i;:::-;894:58;;;;-1:-1:-1;;;894:58:7;;;;;;;:::i;:::-;1253:6:15::1;6717:16;:40;;;6713:106;;;6766:53;;-1:-1:-1::0;;;6766:53:15::1;;;;;;;;;;;6713:106;6829:15;:34:::0;;::::1;::::0;;::::1;-1:-1:-1::0;;;6829:34:15::1;-1:-1:-1::0;;;;6829:34:15;;::::1;::::0;;;::::1;::::0;;6628:242::o;5531:136::-;902:33:7;915:10;927:7;;-1:-1:-1;;;;;;927:7:7;902:12;:33::i;:::-;894:58;;;;-1:-1:-1;;;894:58:7;;;;;;;:::i;:::-;-1:-1:-1;;;;;5594:18:15;::::1;;::::0;;;:11:::1;:18;::::0;;;;;:25;;-1:-1:-1;;5594:25:15::1;5615:4;5594:25;::::0;;5634:26;::::1;::::0;5594:18;5634:26:::1;5531:136:::0;:::o;10959:926::-;11205:14;902:33:7;915:10;927:7;;-1:-1:-1;;;;;;927:7:7;902:12;:33::i;:::-;894:58;;;;-1:-1:-1;;;894:58:7;;;;;;;:::i;:::-;512:6:11::1;;522:1;512:11;504:34;;;;-1:-1:-1::0;;;504:34:11::1;;;;;;;:::i;:::-;558:1;549:10:::0;;11235:8:15::2;::::0;-1:-1:-1;;;11235:8:15;::::2;;;11231:58;;;11252:37;;-1:-1:-1::0;;;11252:37:15::2;;;;;;;;;;;11231:58;-1:-1:-1::0;;;;;11304:25:15;::::2;;::::0;;;:11:::2;:25;::::0;;;;;::::2;;11299:87;;11338:48;;-1:-1:-1::0;;;11338:48:15::2;;;;;;;;;;;11299:87;11401:81;::::0;-1:-1:-1;;;11401:81:15;;11421:10:::2;11401:81;::::0;::::2;8040:34:18::0;-1:-1:-1;;;;;11441:5:15::2;8110:15:18::0;;8090:18;;;8083:43;8142:18;;;8135:34;;;8185:18;;;8178:34;;;8261:4;8249:17;;8228:19;;;8221:46;8283:19;;;8276:35;;;8327:19;;;8320:35;;;11401:19:15;::::2;::::0;::::2;::::0;7974::18;;11401:81:15::2;;;;;;;;;;;;;;;;;::::0;::::2;;;;;;;;;;;;;;;;11397:300;;11518:50;::::0;-1:-1:-1;;;11518:50:15;;11541:10:::2;11518:50;::::0;::::2;8578:34:18::0;-1:-1:-1;;;;;11561:5:15::2;8648:15:18::0;;8628:18;;;8621:43;11571:13:15;;11518:22;;::::2;::::0;::::2;::::0;8513:18:18;;11518:50:15::2;;;;;;;;;;;;;;;;;::::0;::::2;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;:66;11514:173;;;11611:61;;-1:-1:-1::0;;;11611:61:15::2;;;;;;;;;;;11514:173;11715:67;11729:12;11743:13;11758:11;11771:10;11715:13;:67::i;:::-;11706:76;;11793:85;11813:10;11825:12;11839:13;11854:6;11862:15;;;;;;;;;;;11793:85;;:19;:85::i;:::-;591:1:11::1;582:6;:10:::0;10959:926:15;;-1:-1:-1;;;;;;;10959:926:15:o;12623:701::-;12777:17;902:33:7;915:10;927:7;;-1:-1:-1;;;;;;927:7:7;902:12;:33::i;:::-;894:58;;;;-1:-1:-1;;;894:58:7;;;;;;;:::i;:::-;-1:-1:-1;;;;;12815:26:15;::::1;;::::0;;;:11:::1;:26;::::0;;;;;::::1;;12810:88;;12850:48;;-1:-1:-1::0;;;12850:48:15::1;;;;;;;;;;;12810:88;12913:11;12928:1;12913:16:::0;12909:70:::1;;12938:41;;-1:-1:-1::0;;;12938:41:15::1;;;;;;;;;;;12909:70;13024:44;::::0;-1:-1:-1;;;13024:44:15;;-1:-1:-1;;;;;199:32:18;;;13024:44:15::1;::::0;::::1;181:51:18::0;13001:79:15::1;::::0;13024:10:::1;:29:::0;;::::1;::::0;::::1;::::0;154:18:18;;13024:44:15::1;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;13001:11:::0;;13070:9:::1;13001:22;:79::i;:::-;12989:91;;13106:13;13094:9;:25;13090:88;;;13128:50;;-1:-1:-1::0;;;13128:50:15::1;;;;;;;;;;;13090:88;13188:65;::::0;-1:-1:-1;;;13188:65:15;;-1:-1:-1;;;;;13188:5:15::1;:10;::::0;::::1;::::0;:65:::1;::::0;13199:2;;13203:13;;13218:9;;13229:10:::1;::::0;13241:11;;13188:65:::1;;;:::i;:::-;;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;::::0;::::1;;;;;;;;;13289:13;-1:-1:-1::0;;;;;13268:49:15::1;;13305:11;13268:49;;;;941:25:18::0;;929:2;914:18;;795:177;13268:49:15::1;;;;;;;;12623:701:::0;;;;;;:::o;5221:99::-;902:33:7;915:10;927:7;;-1:-1:-1;;;;;;927:7:7;902:12;:33::i;:::-;894:58;;;;-1:-1:-1;;;894:58:7;;;;;;;:::i;:::-;5272:8:15::1;:16:::0;;-1:-1:-1;;;;5272:16:15::1;::::0;;5303:10:::1;::::0;::::1;::::0;5283:5:::1;::::0;5303:10:::1;5221:99::o:0;7969:1301::-;902:33:7;915:10;927:7;;-1:-1:-1;;;;;;927:7:7;902:12;:33::i;:::-;894:58;;;;-1:-1:-1;;;894:58:7;;;;;;;:::i;:::-;8296:32:15;8258:34:::1;8276:16:::0;8258:15:::1;:34;:::i;:::-;8257:71;8253:231;;;8425:48;;-1:-1:-1::0;;;8425:48:15::1;;;;;;;;;;;8253:231;8538:144;::::0;;-1:-1:-1;;;;;10052:15:18;;;8538:144:15::1;::::0;::::1;10034:34:18::0;10104:15;;10084:18;;;10077:43;;;;10136:18;;;10129:34;;;10179:18;;;10172:34;;;10222:19;;;10215:35;;;10266:19;;;10259:35;;;8493:19:15::1;::::0;9968::18;;8538:144:15::1;::::0;;-1:-1:-1;;8538:144:15;;::::1;::::0;;;;;;8515:177;;8538:144:::1;8515:177:::0;;::::1;::::0;8706:27:::1;::::0;;;:20:::1;:27:::0;;;;;;8515:177;;-1:-1:-1;8706:42:15;::::1;8702:100;;8757:45;;-1:-1:-1::0;;;8757:45:15::1;;;;;;;;;;;8702:100;8866:27;::::0;;;:20:::1;:27;::::0;;;;8859:34;-1:-1:-1;;;;;8997:22:15;::::1;1083:42;8997:22;:62;;9047:12;8997:62;;;9030:13;8997:62;9123:79;::::0;-1:-1:-1;;;9123:79:15;;8982:77;;-1:-1:-1;;;;;;9123:5:15::1;:10;::::0;::::1;::::0;:79:::1;::::0;9134:8;;8982:77;;9165:13;;9134:8;;9190:11;;9123:79:::1;;;:::i;:::-;;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;::::0;::::1;;;;;;;;;9254:8;-1:-1:-1::0;;;;;9218:45:15::1;9234:5;9218:45;9241:11;9218:45;;;;941:25:18::0;;929:2;914:18;;795:177;9218:45:15::1;;;;;;;;8243:1027;7969:1301:::0;;;;;;;:::o;5779:142::-;902:33:7;915:10;927:7;;-1:-1:-1;;;;;;927:7:7;902:12;:33::i;:::-;894:58;;;;-1:-1:-1;;;894:58:7;;;;;;;:::i;:::-;-1:-1:-1;;;;;5845:18:15;::::1;5866:5;5845:18:::0;;;:11:::1;:18;::::0;;;;;:26;;-1:-1:-1;;5845:26:15::1;::::0;;5886:28;::::1;::::0;5866:5;5886:28:::1;5779:142:::0;:::o;1523:434:7:-;1794:5;;-1:-1:-1;;;;;1794:5:7;1780:10;:19;;:76;;-1:-1:-1;1803:9:7;;:53;;-1:-1:-1;;;1803:53:7;;-1:-1:-1;;;;;1803:9:7;;;;:17;;:53;;1821:10;;1841:4;;-1:-1:-1;;;;;;1803:9:7;1848:7;;;1803:53;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;1772:85;;;;;;1868:9;:24;;-1:-1:-1;;;;;;1868:24:7;-1:-1:-1;;;;;1868:24:7;;;;;;;;1908:42;;1925:10;;1908:42;;-1:-1:-1;;1908:42:7;1523:434;:::o;4964:94:15:-;902:33:7;915:10;927:7;;-1:-1:-1;;;;;;927:7:7;902:12;:33::i;:::-;894:58;;;;-1:-1:-1;;;894:58:7;;;;;;;:::i;:::-;5013:8:15::1;:15:::0;;-1:-1:-1;;;;5013:15:15::1;-1:-1:-1::0;;;5013:15:15::1;::::0;;5043:8:::1;::::0;::::1;::::0;5013:15;;5043:8:::1;4964:94::o:0;12056:440::-;12229:14;902:33:7;915:10;927:7;;-1:-1:-1;;;;;;927:7:7;902:12;:33::i;:::-;894:58;;;;-1:-1:-1;;;894:58:7;;;;;;;:::i;:::-;512:6:11::1;;522:1;512:11;504:34;;;;-1:-1:-1::0;;;504:34:11::1;;;;;;;:::i;:::-;558:1;549:10:::0;;-1:-1:-1;;;;;12264:25:15;::::2;;::::0;;;:11:::2;:25;::::0;;;;;::::2;;12259:87;;12298:48;;-1:-1:-1::0;;;12298:48:15::2;;;;;;;;;;;12259:87;12366:59;12380:12;12394:13;12409:11;12422:2;12366:13;:59::i;:::-;12357:68;;12460:12;-1:-1:-1::0;;;;;12440:49:15::2;;12475:13;12440:49;;;;941:25:18::0;;929:2;914:18;;795:177;12440:49:15::2;;;;;;;;591:1:11::1;582:6;:10:::0;12056:440:15;;-1:-1:-1;;;;12056:440:15:o;7089:168::-;-1:-1:-1;;;;;7155:21:15;;;;;;:15;:21;;;;;;7180:15;-1:-1:-1;7151:99:15;;7204:46;;-1:-1:-1;;;7204:46:15;;;;;;;;;;;7151:99;7089:168;:::o;1963:164:7:-;902:33;915:10;927:7;;-1:-1:-1;;;;;;927:7:7;902:12;:33::i;:::-;894:58;;;;-1:-1:-1;;;894:58:7;;;;;;;:::i;:::-;2046:5:::1;:16:::0;;-1:-1:-1;;;;;;2046:16:7::1;-1:-1:-1::0;;;;;2046:16:7;::::1;::::0;;::::1;::::0;;2078:42:::1;::::0;2046:16;;2099:10:::1;::::0;2078:42:::1;::::0;2046:5;2078:42:::1;1963:164:::0;:::o;977:540::-;1097:9;;1064:4;;-1:-1:-1;;;;;1097:9:7;1415:27;;;;;:77;;-1:-1:-1;1446:46:7;;-1:-1:-1;;;1446:46:7;;-1:-1:-1;;;;;1446:12:7;;;;;:46;;1459:4;;1473;;1480:11;;1446:46;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;1414:96;;;-1:-1:-1;1505:5:7;;-1:-1:-1;;;;;1497:13:7;;;1505:5;;1497:13;1414:96;1407:103;;;977:540;;;;;:::o;1564:526:10:-;1680:9;1928:1;-1:-1:-1;;1911:19:10;1908:1;1905:26;1902:1;1898:34;1891:42;1878:11;1874:60;1864:116;;1964:1;1961;1954:12;1864:116;-1:-1:-1;2051:9:10;;2047:27;;1564:526::o;4729:1605:12:-;4840:12;5010:4;5004:11;-1:-1:-1;;;5133:17:12;5126:93;-1:-1:-1;;;;;5270:2:12;5266:51;5262:1;5243:17;5239:25;5232:86;5404:6;5399:2;5380:17;5376:26;5369:42;6256:2;6253:1;6249:2;6230:17;6227:1;6220:5;6213;6208:51;5777:16;5770:24;5764:2;5746:16;5743:24;5739:1;5735;5729:8;5726:15;5722:46;5719:76;5519:754;5508:765;;;6301:7;6293:34;;;;-1:-1:-1;;;6293:34:12;;11194:2:18;6293:34:12;;;11176:21:18;11233:2;11213:18;;;11206:30;-1:-1:-1;;;11252:18:18;;;11245:44;11306:18;;6293:34:12;10992:338:18;6293:34:12;4830:1504;4729:1605;;;:::o;13531:506:15:-;13664:14;13698:13;13715:1;13698:18;13694:72;;13725:41;;-1:-1:-1;;;13725:41:15;;;;;;;;;;;13694:72;13821:43;;-1:-1:-1;;;13821:43:15;;-1:-1:-1;;;;;199:32:18;;;13821:43:15;;;181:51:18;13785:80:15;;13810:9;;13821:10;:29;;;;154:18:18;;13821:43:15;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;13785:13;;:80;:24;:80::i;:::-;13776:89;;13888:11;13879:6;:20;13875:81;;;13908:48;;-1:-1:-1;;;13908:48:15;;;;;;;;;;;13875:81;13966:64;;-1:-1:-1;;;13966:64:15;;-1:-1:-1;;;;;13966:5:15;:11;;;;:64;;13978:10;;13990:12;;14004:13;;14019:2;;14023:6;;13966:64;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;13531:506;;;;;;:::o;14110:612::-;14333:40;14351:22;14333:15;:40;:::i;:::-;-1:-1:-1;;;;;14309:21:15;;;;;;;:15;:21;;;;;;;;;:64;;;;14400:12;;14474:94;;;;;10034:34:18;;;;10104:15;;;10084:18;;;10077:43;;;;10136:18;;;10129:34;;;10179:18;;;10172:34;;;14528:15:15;10222:19:18;;;10215:35;10266:19;;;10259:35;;;-1:-1:-1;;;;;14400:12:15;;9968:19:18;;14474:94:15;;;-1:-1:-1;;14474:94:15;;;;;;;;;14464:105;;14474:94;14464:105;;;;14422:27;;;;:20;:27;;;;;;:147;14579:12;:14;;-1:-1:-1;;;;;14579:14:15;;;;;:::i;:::-;;;;;;;;-1:-1:-1;;;;;14579:14:15;;;;;-1:-1:-1;;;;;14579:14:15;;;;;;;14637:12;-1:-1:-1;;;;;14608:107:15;14623:4;-1:-1:-1;;;;;14608:107:15;14616:5;14608:107;14652:13;14667:6;14675:15;14692:22;14608:107;;;;;;;;12528:25:18;;;12584:2;12569:18;;12562:34;;;;12627:2;12612:18;;12605:34;12670:2;12655:18;;12648:34;12515:3;12500:19;;12297:391;14608:107:15;;;;;;;;14299:423;14110:612;;;;;:::o;243:138:18:-;-1:-1:-1;;;;;325:31:18;;315:42;;305:70;;371:1;368;361:12;386:404;477:6;485;493;546:2;534:9;525:7;521:23;517:32;514:52;;;562:1;559;552:12;514:52;601:9;588:23;620:38;652:5;620:38;:::i;:::-;677:5;729:2;714:18;;701:32;;-1:-1:-1;780:2:18;765:18;;;752:32;;386:404;-1:-1:-1;;;386:404:18:o;977:284::-;1035:6;1088:2;1076:9;1067:7;1063:23;1059:32;1056:52;;;1104:1;1101;1094:12;1056:52;1143:9;1130:23;1193:18;1186:5;1182:30;1175:5;1172:41;1162:69;;1227:1;1224;1217:12;1162:69;1250:5;977:284;-1:-1:-1;;;977:284:18:o;1266:254::-;1325:6;1378:2;1366:9;1357:7;1353:23;1349:32;1346:52;;;1394:1;1391;1384:12;1346:52;1433:9;1420:23;1452:38;1484:5;1452:38;:::i;1798:777::-;1923:6;1931;1939;1947;1955;1963;1971;2024:3;2012:9;2003:7;1999:23;1995:33;1992:53;;;2041:1;2038;2031:12;1992:53;2080:9;2067:23;2099:38;2131:5;2099:38;:::i;:::-;2156:5;-1:-1:-1;2208:2:18;2193:18;;2180:32;;-1:-1:-1;2259:2:18;2244:18;;2231:32;;-1:-1:-1;2310:2:18;2295:18;;2282:32;;-1:-1:-1;2366:3:18;2351:19;;2338:33;2415:4;2402:18;;2390:31;;2380:59;;2435:1;2432;2425:12;2380:59;1798:777;;;;-1:-1:-1;1798:777:18;;;;2458:7;2512:3;2497:19;;2484:33;;-1:-1:-1;2564:3:18;2549:19;;;2536:33;;1798:777;-1:-1:-1;;1798:777:18:o;2580:553::-;2680:6;2688;2696;2704;2757:3;2745:9;2736:7;2732:23;2728:33;2725:53;;;2774:1;2771;2764:12;2725:53;2813:9;2800:23;2832:38;2864:5;2832:38;:::i;:::-;2889:5;-1:-1:-1;2941:2:18;2926:18;;2913:32;;-1:-1:-1;2992:2:18;2977:18;;2964:32;;-1:-1:-1;3048:2:18;3033:18;;3020:32;3061:40;3020:32;3061:40;:::i;:::-;2580:553;;;;-1:-1:-1;2580:553:18;;-1:-1:-1;;2580:553:18:o;3138:746::-;3251:6;3259;3267;3275;3283;3291;3299;3352:3;3340:9;3331:7;3327:23;3323:33;3320:53;;;3369:1;3366;3359:12;3320:53;3405:9;3392:23;3382:33;;3465:2;3454:9;3450:18;3437:32;3478:38;3510:5;3478:38;:::i;:::-;3535:5;-1:-1:-1;3592:2:18;3577:18;;3564:32;3605:40;3564:32;3605:40;:::i;:::-;3138:746;;;;-1:-1:-1;3664:7:18;;3718:2;3703:18;;3690:32;;-1:-1:-1;3769:3:18;3754:19;;3741:33;;3821:3;3806:19;;3793:33;;-1:-1:-1;3873:3:18;3858:19;;;3845:33;;-1:-1:-1;3138:746:18;-1:-1:-1;;3138:746:18:o;4809:180::-;4868:6;4921:2;4909:9;4900:7;4896:23;4892:32;4889:52;;;4937:1;4934;4927:12;4889:52;-1:-1:-1;4960:23:18;;4809:180;-1:-1:-1;4809:180:18:o;6055:336::-;6257:2;6239:21;;;6296:2;6276:18;;;6269:30;-1:-1:-1;;;6330:2:18;6315:18;;6308:42;6382:2;6367:18;;6055:336::o;6396:334::-;6598:2;6580:21;;;6637:2;6617:18;;;6610:30;-1:-1:-1;;;6671:2:18;6656:18;;6649:40;6721:2;6706:18;;6396:334::o;6956:184::-;7026:6;7079:2;7067:9;7058:7;7054:23;7050:32;7047:52;;;7095:1;7092;7085:12;7047:52;-1:-1:-1;7118:16:18;;6956:184;-1:-1:-1;6956:184:18:o;7145:541::-;-1:-1:-1;;;;;7473:15:18;;;7455:34;;7525:15;;;7520:2;7505:18;;7498:43;7572:2;7557:18;;7550:34;;;;7620:15;;;7615:2;7600:18;;7593:43;7667:3;7652:19;;7645:35;;;;7404:3;7389:19;;7145:541::o;9444:127::-;9505:10;9500:3;9496:20;9493:1;9486:31;9536:4;9533:1;9526:15;9560:4;9557:1;9550:15;9576:128;9643:9;;;9664:11;;;9661:37;;;9678:18;;:::i;10305:400::-;-1:-1:-1;;;;;10561:15:18;;;10543:34;;10613:15;;;;10608:2;10593:18;;10586:43;-1:-1:-1;;;;;;10665:33:18;;;10660:2;10645:18;;10638:61;10493:2;10478:18;;10305:400::o;10710:277::-;10777:6;10830:2;10818:9;10809:7;10805:23;10801:32;10798:52;;;10846:1;10843;10836:12;10798:52;10878:9;10872:16;10931:5;10924:13;10917:21;10910:5;10907:32;10897:60;;10953:1;10950;10943:12;11335:125;11400:9;;;11421:10;;;11418:36;;;11434:18;;:::i;12075:217::-;12113:3;-1:-1:-1;;;;;12202:2:18;12195:5;12191:14;12229:2;12220:7;12217:15;12214:41;;12235:18;;:::i;:::-;12284:1;12271:15;;12075:217;-1:-1:-1;;;12075:217:18:o

ipfs://36af0a2854a8446f7235bdcd66de20084a71e049091d98d973570a300080f3d6