Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (finance/VestingWallet.sol)
pragma solidity ^0.8.0;

import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/utils/Context.sol";
import "@openzeppelin/contracts/utils/math/Math.sol";
import "./DHold.sol";

/**
 * @title VestingWallet
 * @notice Contract modified to claim reflections reflected on this contract and send the reflected value to beneficiary
 * not handling vesting ETH model, just ERC20
 * @dev This contract handles the vesting of  ERC20 tokens for a given beneficiary. Custody of multiple tokens
 * can be given to this contract, which will release the token to the beneficiary following a given vesting schedule.
 * The vesting schedule is customizable through the {vestedAmount} function.
 *
 * Any token transferred to this contract will follow the vesting schedule as if they were locked from the beginning.
 * Consequently, if the vesting has already started, any amount of tokens sent to this contract will (at least partly)
 * be immediately releasable.
 */
contract VestingWallet is Context {
    event ERC20Released(address indexed token, uint256 amount);

    mapping(address => uint256) private _erc20Released;
    address private immutable _beneficiary;
    
    uint64 private immutable _start;
    uint64 private constant DURATION = 365 days;

    /**
     * @dev Set the beneficiary, start timestamp and vesting duration of the vesting wallet.
     */
    constructor(address beneficiaryAddress) {
        require(beneficiaryAddress != address(0), "VestingWallet: beneficiary is zero address");
        _beneficiary = beneficiaryAddress;
        _start = uint64(block.timestamp);
    }

    /**
     * @dev The contract should be able to receive Eth.
     */
    receive() external payable virtual {}

    /**
     * @dev Getter for the beneficiary address.
     */
    function beneficiary() public view virtual returns (address) {
        return _beneficiary;
    }

    /**
     * @dev Getter for the start timestamp.
     */
    function start() public view virtual returns (uint256) {
        return _start;
    }

    /**
     * @dev Getter for the vesting duration.
     */
    function duration() public view virtual returns (uint256) {
        return DURATION;
    }

    /**
     * @dev Amount of token already released
     */
    function released(address token) public view virtual returns (uint256) {
        return _erc20Released[token];
    }

    /**
     * @dev Release the tokens that have already vested.
     *
     * Emits a {TokensReleased} event.
     */
    function release(address token) public virtual {
        uint256 releasable = vestedAmount(token, uint64(block.timestamp)) - released(token);
        _erc20Released[token] += releasable;
        emit ERC20Released(token, releasable);
        SafeERC20.safeTransfer(IERC20(token), beneficiary(), releasable);
    }


    /**
     * @dev Calculates the amount of tokens that has already vested. Default implementation is a linear vesting curve.
     */
    function vestedAmount(address token, uint64 timestamp) public view virtual returns (uint256) {
        return _vestingSchedule(IERC20(token).balanceOf(address(this)) + released(token), timestamp);
    }

    /**
     * @dev Virtual implementation of the vesting formula. This returns the amout vested, as a function of time, for
     * an asset given its total historical allocation.
     */
    function _vestingSchedule(uint256 totalAllocation, uint64 timestamp) internal view virtual returns (uint256) {
        if (timestamp < start()) {
            return 0;
        } else if (timestamp > start() + duration()) {
            return totalAllocation;
        } else {
            return (totalAllocation * (timestamp - start())) / duration();
        }
    }


    function claimReflections(address payable dHold) public {
        DHold(dHold).claimReflection();
    }

    function withdraw() public {
        payable(beneficiary()).transfer(address(this).balance);
    }

    
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol; 

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);

        uint256 currentAllowance = _allowances[sender][_msgSender()];
        require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
        unchecked {
            _approve(sender, _msgSender(), currentAllowance - amount);
        }

        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        uint256 currentAllowance = _allowances[_msgSender()][spender];
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(_msgSender(), spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `sender` to `recipient`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        uint256 senderBalance = _balances[sender];
        require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[sender] = senderBalance - amount;
        }
        _balances[recipient] += amount;

        emit Transfer(sender, recipient, amount);

        _afterTokenTransfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        _balances[account] += amount;
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
        }
        _totalSupply -= amount;

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

// SPDX-License-Identifier: UNLICENSED

pragma solidity ^0.8.0;

import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";

import "@uniswap/v2-core/contracts/interfaces/IUniswapV2Factory.sol";
import "@uniswap/v2-periphery/contracts/interfaces/IUniswapV2Router02.sol"; 

import "./Ownable.sol";
 
contract DHold is ERC20, Ownable {

    using EnumerableSet for EnumerableSet.AddressSet;

    modifier lockSwap {
        _inSwap = true;
        _;
        _inSwap = false;
    }

    modifier liquidityAdd {
        _inLiquidityAdd = true;
        _;
        _inLiquidityAdd = false;
    }

    // Constants
    uint256 internal constant MARKETING_RATE = 10; //both marketing and treasury, 5% each
    uint256 internal constant REFLECT_RATE = 10;
    uint256 internal constant COOLDOWN = 60 seconds;
    uint256 internal constant SWAP_FEES_AT = 1000 ether;
    address internal constant LP_HOLDER = 0x823bF3514d593d0Ee796Afe4339987812C3bf795;

    uint256 internal _maxTransfer = 5; 

    // total wei reflected ever
    uint256 public ethReflectionBasis; 
    uint256 public totalReflected;
    uint256 public totalMarketing;

    uint256 internal _totalSupply;
    uint256 public tradingStartBlock;

    address payable public marketingWallet;
    address payable public treasuryWallet;

    address public pair;
    bool internal _inSwap;
    bool internal _inLiquidityAdd;
    bool public tradingActive;
    bool internal _swapFees = true;

    IUniswapV2Router02 internal _router;
    EnumerableSet.AddressSet internal _reflectionExcludedList;
    
    mapping(address => uint256) private _balances;
    mapping(address => bool) public taxExcluded;
    mapping(address => bool) private _bot;
    mapping(address => uint256) public lastBuy;
    mapping(address => uint256) public lastReflectionBasis;
    mapping(address => uint256) public claimedReflection;
    
    constructor(
        address uniswapFactory,
        address uniswapRouter,
        address payable marketing, //multisig with 5%
        address payable treasury //multisig with 5%
    ) ERC20("DeFi Holdings", "DHOLD") Ownable(msg.sender) {
        _reflectionExcludedList.add(address(0));
        taxExcluded[marketing] = true;
        taxExcluded[treasury] = true;
        taxExcluded[address(this)] = true;

        marketingWallet = marketing;
        treasuryWallet = treasury;

        _router = IUniswapV2Router02(uniswapRouter);
        IUniswapV2Factory uniswapContract = IUniswapV2Factory(uniswapFactory);
        pair = uniswapContract.createPair(address(this), _router.WETH());
    }

    function addLiquidity(uint256 tokens) public payable onlyOwner() liquidityAdd {
        _mint(address(this), tokens);
        _approve(address(this), address(_router), tokens);

        _router.addLiquidityETH{value: msg.value}(
            address(this),
            tokens,
            0,
            0,
            LP_HOLDER,
            // solhint-disable-next-line not-rely-on-time
            block.timestamp
        );

        if (!tradingActive) {
            tradingActive = true;
            tradingStartBlock = block.number;
        }
    }

    function addReflection() public payable {
        ethReflectionBasis += msg.value;
    }

    function isReflectionExcluded(address account) public view returns (bool) {
        return _reflectionExcludedList.contains(account);
    }

    function removeReflectionExcluded(address account) public onlyOwner() {
        require(isReflectionExcluded(account), "Account must be excluded");
        _reflectionExcludedList.remove(account);
    }

    function addReflectionExcluded(address account) public onlyOwner() {
        _addReflectionExcluded(account);
    }

    function _addReflectionExcluded(address account) internal {
        require(!isReflectionExcluded(account), "Account must not be excluded");
        _reflectionExcludedList.add(account);
    }

    function isTaxExcluded(address account) public view returns (bool) {
        return taxExcluded[account];
    }

    function addTaxExcluded(address account) public onlyOwner() {
        require(!isTaxExcluded(account), "Account must not be excluded");

        taxExcluded[account] = true;
    }

    function removeTaxExcluded(address account) public onlyOwner() {
        require(isTaxExcluded(account), "Account must not be excluded");

        taxExcluded[account] = false;
    }

    function isBot(address account) public view returns (bool) {
        return _bot[account];
    }

    function addBot(address account) internal {
        _addBot(account);
    }

    function _addBot(address account) internal {
        require(!isBot(account), "Account must not be flagged");
        require(account != address(_router), "Account must not be uniswap router");
        require(account != pair, "Account must not be uniswap pair");

        _bot[account] = true;
        _addReflectionExcluded(account);
    }

    function removeBot(address account) public onlyOwner() {
        require(isBot(account), "Account must be flagged");

        _bot[account] = false;
        removeReflectionExcluded(account);
    }

    function balanceOf(address account)
        public
        view
        virtual
        override
        returns (uint256) {
        return _balances[account];
    }

    function _addBalance(address account, uint256 amount) internal {
        _balances[account] = _balances[account] + amount;
    }

    function _subtractBalance(address account, uint256 amount) internal {
        _balances[account] = _balances[account] - amount;
    }

    function _transfer(address sender, address recipient, uint256 amount) internal override {
        if (isTaxExcluded(sender) || isTaxExcluded(recipient)) {
            _rawTransfer(sender, recipient, amount);
            return;
        }

        require(!isBot(sender), "Sender locked as bot");
        require(!isBot(recipient), "Recipient locked as bot");
        uint256 maxTxAmount = totalSupply() * _maxTransfer / 1000;
        require(amount <= maxTxAmount || _inLiquidityAdd || _inSwap || recipient == address(_router), "Exceeds max transaction amount");

        // checks if contractTokenBalance >= 1000 DHold and swaps it for ETH inside _swap function
        uint256 contractTokenBalance = balanceOf(address(this));
        bool overMinTokenBalance = contractTokenBalance >= SWAP_FEES_AT;

        if(contractTokenBalance >= maxTxAmount) {
            contractTokenBalance = maxTxAmount;
        }

        if (
            overMinTokenBalance &&
            !_inSwap &&
            sender != pair &&
            _swapFees
        ) {
            _swap(contractTokenBalance);
        }
        // ends check


        _claimReflection(sender, payable(sender));
        _claimReflection(recipient, payable(recipient));

        uint256 send = amount;  // i.e: 1000 DHold 
        uint256 reflect;
        uint256 marketing;
        if (sender == pair && tradingActive) {
            // Buy, apply buy fee schedule
            (send, reflect) = _getBuyTaxAmounts(amount); // send = 900, reflect = 100
            require(block.timestamp - lastBuy[tx.origin] > COOLDOWN || _inSwap, "hit cooldown, try again later");
            lastBuy[tx.origin] = block.timestamp;
            _reflect(sender, reflect); // (pair, 100)
        } else if (recipient == pair && tradingActive) {
            // Sell, apply sell fee schedule
            (send, marketing ) = _getSellTaxAmounts(amount);
            _takeMarketing(sender, marketing);
        }

        //            pair    buyer     900
        _rawTransfer(sender, recipient, send);

        if (tradingActive && block.number == tradingStartBlock && !isTaxExcluded(tx.origin)) {
            if (tx.origin == address(pair)) {
                if (sender == address(pair)) {
                    _addBot(recipient);
                } else {
                    _addBot(sender);
                }
            } else {
                _addBot(tx.origin);
            }
        }
    }

    function _claimReflection(address addr, address payable to) internal {
        if (addr == pair || addr == address(_router)) return;

        uint256 basisDifference = ethReflectionBasis - lastReflectionBasis[addr];
        uint256 owed = basisDifference * balanceOf(addr) / _totalSupply;

        lastReflectionBasis[addr] = ethReflectionBasis;
        if (owed == 0) {
                return;
        }
        claimedReflection[addr] += owed;
        to.transfer(owed);
    }

    function claimReflection() public {
        require(!_reflectionExcludedList.contains(msg.sender), "Excluded from reflections");
        _claimReflection(msg.sender, payable(msg.sender));
    }

    function claimExcludedReflections(address from) public virtual onlyOwner {
        require(_reflectionExcludedList.contains(from), "Address not excluded");
        _claimReflection(from, payable(owner()));
    }

    function _swap(uint256 amount) internal lockSwap {
        address[] memory path = new address[](2);
        path[0] = address(this);
        path[1] = _router.WETH();

        _approve(address(this), address(_router), amount);

        uint256 contractEthBalance = address(this).balance;

        _router.swapExactTokensForETHSupportingFeeOnTransferTokens(
            amount,
            0,
            path,
            address(this),
            block.timestamp
        );

        uint256 tradeValue = address(this).balance - contractEthBalance;

        uint256 marketingAmount = amount * totalMarketing / (totalMarketing + totalReflected);
        uint256 reflectedAmount = amount - marketingAmount;

        uint256 marketingEth = tradeValue * totalMarketing / (totalMarketing + totalReflected);
        uint256 reflectedEth = tradeValue - marketingEth;

        if (marketingEth > 0) {
            uint256 split = marketingEth / 2;
            marketingWallet.transfer(split);
            treasuryWallet.transfer(marketingEth - split);
        }
        totalMarketing -= marketingAmount;
        totalReflected -= reflectedAmount;
        ethReflectionBasis += reflectedEth;
    }

    function swapAll() public {
        uint256 maxTxAmount = totalSupply() * _maxTransfer / 1000;
        uint256 contractTokenBalance = balanceOf(address(this));

        if(contractTokenBalance >= maxTxAmount) {
            contractTokenBalance = maxTxAmount;
        }

        if (!_inSwap) _swap(contractTokenBalance);
        
    }

    function withdrawAll() public onlyOwner() {
        uint256 split = address(this).balance / 2;
        marketingWallet.transfer(split);
        treasuryWallet.transfer(address(this).balance - split);
    }

    //                          pair , 100
    function _reflect(address account, uint256 amount) internal {
        require(account != address(0), "reflect from the zero address");

        //      from(pair)  , to(this)     , 100DHOld 
        _rawTransfer(account, address(this), amount);
        totalReflected += amount;
        emit Transfer(account, address(this), amount);
    }

    function _takeMarketing(address account, uint256 amount) internal {
        require(account != address(0), "take marketing from the zero address");

        _rawTransfer(account, address(this), amount);
        totalMarketing += amount;
        emit Transfer(account, address(this), amount);
    }

    function _getBuyTaxAmounts(uint256 amount) internal pure returns (uint256 send, uint256 reflect) {
        reflect = 0;
        uint256 sendRate = 100 - REFLECT_RATE; // 100 - 10 = 90
        assert(sendRate >= 0);

        send = (amount * sendRate) / 100; // (1000 * 90) /100 = 900
        reflect = amount - send; // 1000 - 900 = 100
        assert(reflect >= 0);
        assert(send + reflect == amount);
    }

    function _getSellTaxAmounts(uint256 amount) internal pure returns (uint256 send, uint256 marketing) {
        marketing = 0;
        uint256 sendRate = 100 - MARKETING_RATE; // 100 - 10 = 90
        assert(sendRate >= 0);

        send = (amount * sendRate) / 100; // (1000 * 90) /100 = 900
        marketing = amount - send; // 1000 - 900 = 100
        assert(send + marketing == amount);
    }

    // modified from OpenZeppelin ERC20
    function _rawTransfer(address sender, address recipient, uint256 amount) internal {
        require(sender != address(0), "transfer from the zero address");
        require(recipient != address(0), "transfer to the zero address");

        uint256 senderBalance = balanceOf(sender);
        require(senderBalance >= amount, "transfer amount exceeds balance");
        unchecked {
            _subtractBalance(sender, amount);
        }
        _addBalance(recipient, amount);

        emit Transfer(sender, recipient, amount);
    }

    function setMaxTransfer(uint256 maxTransfer) public onlyOwner() {
        _maxTransfer = maxTransfer;
    }

    function setSwapFees(bool swapFees) public onlyOwner() {
        _swapFees = swapFees;
    }

    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    function _mint(address account, uint256 amount) internal override {
        _totalSupply += amount;
        _addBalance(account, amount);
        emit Transfer(address(0), account, amount);
    }

    function mint(address account, uint256 amount) public onlyOwner() {
        _mint(account, amount);
    }

    function airdrop(address[] memory accounts, uint256[] memory amounts) public onlyOwner() {
        require(accounts.length == amounts.length, "array lengths must match");

        for (uint256 i = 0; i < accounts.length; i++) {
            _mint(accounts[i], amounts[i]);
        }
    }

    receive() external payable {}

}

pragma solidity >=0.6.2;

import './IUniswapV2Router01.sol';

interface IUniswapV2Router02 is IUniswapV2Router01 {
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountETH);
    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountETH);

    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external payable;
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
}

pragma solidity >=0.6.2;

interface IUniswapV2Router01 {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint amountADesired,
        uint amountBDesired,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB, uint liquidity);
    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);
    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETH(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountToken, uint amountETH);
    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETHWithPermit(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountToken, uint amountETH);
    function swapExactTokensForTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapTokensForExactTokens(
        uint amountOut,
        uint amountInMax,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);
    function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);

    function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
    function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
    function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
    function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
    function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}

pragma solidity >=0.5.0;

interface IUniswapV2Factory {
    event PairCreated(address indexed token0, address indexed token1, address pair, uint);

    function feeTo() external view returns (address);
    function feeToSetter() external view returns (address);

    function getPair(address tokenA, address tokenB) external view returns (address pair);
    function allPairs(uint) external view returns (address pair);
    function allPairsLength() external view returns (uint);

    function createPair(address tokenA, address tokenB) external returns (address pair);

    function setFeeTo(address) external;
    function setFeeToSetter(address) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastvalue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastvalue;
                // Update the index for the moved value
                set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        return _values(set._inner);
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "@openzeppelin/contracts/utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner; //4

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor(address newOwner) {
        _setOwner(newOwner);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _setOwner(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _setOwner(newOwner);
    }

    function _setOwner(address newOwner) private {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a / b + (a % b == 0 ? 0 : 1);
    }
}

{
  "remappings": [],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"beneficiaryAddress","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"token","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"ERC20Released","type":"event"},{"inputs":[],"name":"beneficiary","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address payable","name":"dHold","type":"address"}],"name":"claimReflections","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"duration","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"release","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"released","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"start","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"uint64","name":"timestamp","type":"uint64"}],"name":"vestedAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

000000000000000000000000a7f35a0b7db47d7887714e176a07c68f4b09a4cb

-----Decoded View---------------
Arg [0] : beneficiaryAddress (address): 0xA7f35a0b7Db47D7887714e176a07c68F4B09A4Cb

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 000000000000000000000000a7f35a0b7db47d7887714e176a07c68f4b09a4cb