Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;

import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {IERC20Metadata, IERC20} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import {IERC721Receiver} from "@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol";
import {ReentrancyGuard} from "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import {SafeCast} from "@openzeppelin/contracts/utils/math/SafeCast.sol";
import {Math} from "@openzeppelin/contracts/utils/math/Math.sol";

import {IPool} from "@maverickprotocol/maverick-v1-interfaces/contracts/interfaces/IPool.sol";
import {IPosition} from "@maverickprotocol/maverick-v1-interfaces/contracts/interfaces/IPosition.sol";

import {IPoolPositionSlim} from "./interfaces/IPoolPositionSlim.sol";
import {Utilities} from "./libraries/Utilities.sol";

contract PoolPositionBaseSlim is IPoolPositionSlim, ERC20, ReentrancyGuard {
    using SafeERC20 for IERC20;

    IPool public immutable override pool;
    bool public immutable isStatic;
    IERC20 immutable tokenA;
    IERC20 immutable tokenB;

    uint128[] public binIds;
    uint128[] public ratios;

    uint256 public immutable tokenId;

    uint256 constant ONE = 1e18;

    // @notice Creates a pool position ERC20 that holds bin liquidity from a
    // Mav AMM pool.  In deploying this contract, the user specifies the
    // liquidity distribution that each minter of the PP ERC20 needs to
    // contribute.  This distribution is specified by the _binIds and _ratios
    // constructor arguments.  Specifically, a new minter will have to add
    // ratios[i] * (binIds[0] bin LP balance) for each bin, i, in
    // binIds. This contract is typically deployed from the Factory and will
    // not properly be paired with the appropiate incentive contract unless
    // deployed from the PoolPositionAndRewardFactorySlim factory.
    // @dev Requirements for constructor
    // - ratios[0] must be 1e18
    // - _binIds and _ratios must be non-empty arrays of the same length
    // - all binIds must be kind=0 unless _binIds.length = 1
    // - _binIds must be sorted in ascending order
    constructor(
        IPool _pool,
        uint128[] memory _binIds,
        uint128[] memory _ratios,
        uint256 factoryCount,
        bool _isStatic
    ) ERC20(Utilities.nameMaker(_pool, factoryCount, true), Utilities.nameMaker(_pool, factoryCount, false)) {
        uint256 binsLength = _binIds.length;
        if (binsLength == 0 || (!_isStatic && binsLength != 1) || binsLength != _ratios.length) revert InvalidBinIds(_binIds);
        if (_ratios[0] != ONE) revert InvalidRatio();

        pool = _pool;
        ratios = _ratios;
        binIds = _binIds;
        tokenId = _pool.factory().position().mint(address(this));
        isStatic = _isStatic;

        tokenA = pool.tokenA();
        tokenB = pool.tokenB();

        uint128 lastBinId;
        IPool.BinState memory bin;
        for (uint256 i; i < binsLength; i++) {
            bin = pool.getBin(_binIds[i]);

            if ((isStatic && bin.kind != 0) || !(_binIds[i] > lastBinId)) revert InvalidBinIds(_binIds);
            lastBinId = _binIds[i];
        }
    }

    modifier checkBin() {
        if (!isStatic && pool.getBin(binIds[0]).mergeId != 0) revert BinIsMerged();
        _;
    }

    //////////////////////////////
    // View Functions
    //////////////////////////////

    /// @inheritdoc IPoolPositionSlim
    function binLpAddAmountRequirement(uint128 binZeroLpAddAmount) external view checkBin returns (IPool.RemoveLiquidityParams[] memory params) {
        params = _binLpAddAmountRequirement(binZeroLpAddAmount);
    }

    /// @inheritdoc IPoolPositionSlim
    function getReserves() external view checkBin returns (uint256 reserveA, uint256 reserveB) {
        (reserveA, reserveB) = _getReserves(tokenId);
    }

    function allBinIds() external view returns (uint128[] memory) {
        return binIds;
    }

    //////////////////////////////
    // Internal Helper Functions
    //////////////////////////////

    function _tokenBinReserves(uint256 _tokenId, uint256 i) internal view returns (uint256 reserveA, uint256 reserveB, uint256 balance) {
        uint128 binId = binIds[i];
        IPool.BinState memory bin = pool.getBin(binId);
        uint128 totalSupply = bin.totalSupply;
        balance = pool.balanceOf(_tokenId, binId);
        reserveA = Math.mulDiv(bin.reserveA, balance, totalSupply);
        reserveB = Math.mulDiv(bin.reserveB, balance, totalSupply);
    }

    function _getReserves(uint256 _tokenId) internal view checkBin returns (uint256 reserveA, uint256 reserveB) {
        uint256 binsLength = binIds.length;
        for (uint256 i; i < binsLength; i++) {
            (uint256 reserveA_, uint256 reserveB_, ) = _tokenBinReserves(_tokenId, i);
            reserveA += reserveA_;
            reserveB += reserveB_;
        }
    }

    function _binLpAddAmountRequirement(uint128 binZeroLpAddAmount) internal view returns (IPool.RemoveLiquidityParams[] memory params) {
        uint256 binsLength = binIds.length;
        params = new IPool.RemoveLiquidityParams[](binsLength);
        params[0] = IPool.RemoveLiquidityParams({binId: binIds[0], amount: binZeroLpAddAmount});

        for (uint256 i = 1; i < binsLength; i++) {
            params[i] = IPool.RemoveLiquidityParams({binId: binIds[i], amount: SafeCast.toUint128(Math.mulDiv(binZeroLpAddAmount, ratios[i], ONE))});
        }
    }

    //////////////////////////////
    // External Admin Functions
    //////////////////////////////

    /// @inheritdoc IPoolPositionSlim
    function migrateBinLiquidity() external virtual {}

    //////////////////////////////
    // Virtual Functions Requiring Override
    //////////////////////////////

    /// @dev update checkpoint array and create a params array with fee
    modifier checkpointLiquidity() virtual {
        _;
    }

    //////////////////////////////
    // Mint / Burn Functions
    //////////////////////////////

    /// @inheritdoc IPoolPositionSlim
    function mint(address to, uint256 fromTokenId, uint128 binZeroLpAddAmount) external override nonReentrant checkBin checkpointLiquidity returns (uint256 amountMinted) {
        if (tokenId == fromTokenId) revert InvalidTokenId(fromTokenId);
        uint256 supply = totalSupply();
        amountMinted = supply == 0 ? binZeroLpAddAmount : Math.mulDiv(binZeroLpAddAmount, supply, pool.balanceOf(tokenId, binIds[0]));

        require(amountMinted != 0, "PP: zero mint");

        pool.transferLiquidity(fromTokenId, tokenId, _binLpAddAmountRequirement(binZeroLpAddAmount));

        _mint(to, amountMinted);
    }

    function _ppBurn(address account, uint256 lpAmountToUnStake) internal checkBin checkpointLiquidity returns (IPool.RemoveLiquidityParams[] memory params) {
        uint256 proRata = Math.mulDiv(ONE, lpAmountToUnStake, totalSupply());

        uint256 binsLength = binIds.length;
        params = new IPool.RemoveLiquidityParams[](binsLength);
        for (uint256 i; i < binsLength; i++) {
            uint256 balance = pool.balanceOf(tokenId, binIds[i]);
            params[i] = IPool.RemoveLiquidityParams({binId: binIds[i], amount: SafeCast.toUint128(Math.mulDiv(balance, proRata, ONE))});
        }
        if (account != msg.sender) _spendAllowance(account, msg.sender, lpAmountToUnStake);
        _burn(account, lpAmountToUnStake);
    }

    /// @inheritdoc IPoolPositionSlim
    function burnFromToTokenIdAsBinLiquidity(address account, uint256 toTokenId, uint256 lpAmountToUnStake) external override nonReentrant returns (IPool.RemoveLiquidityParams[] memory params) {
        params = _ppBurn(account, lpAmountToUnStake);
        pool.transferLiquidity(tokenId, toTokenId, params);
    }

    /// @inheritdoc IPoolPositionSlim
    function burnFromToAddressAsReserves(address account, address recipient, uint256 lpAmountToUnStake) external nonReentrant returns (uint256 amountA, uint256 amountB) {
        IPool.RemoveLiquidityParams[] memory params = _ppBurn(account, lpAmountToUnStake);
        (amountA, amountB, ) = pool.removeLiquidity(recipient, tokenId, params);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "../interfaces/IPool.sol";
import "../interfaces/IPosition.sol";
interface IFactory {
    event PoolCreated(address poolAddress, uint256 fee, uint256 tickSpacing, int32 activeTick, int256 lookback, uint64 protocolFeeRatio, IERC20 tokenA, IERC20 tokenB);
    event SetFactoryProtocolFeeRatio(uint64 protocolFeeRatio);
    event SetFactoryOwner(address owner);
    /// @notice creates new pool
    /// @param _fee is a rate in prbmath 60x18 decimal format
    /// @param _tickSpacing  1.0001^tickSpacing is the bin width
    /// @param _activeTick initial activeTick of the pool
    /// @param _lookback TWAP lookback in whole seconds
    /// @param _tokenA ERC20 token
    /// @param _tokenB ERC20 token
    function create(
        uint256 _fee,
        uint256 _tickSpacing,
        int256 _lookback,
        int32 _activeTick,
        IERC20 _tokenA,
        IERC20 _tokenB
    ) external returns (IPool);
    function lookup(
        uint256 fee,
        uint256 tickSpacing,
        int256 lookback,
        IERC20 tokenA,
        IERC20 tokenB
    ) external view returns (IPool);
    function owner() external view returns (address);
    function position() external view returns (IPosition);
    /// @notice protocolFeeRatio ratio of the swap fee that is kept for the
    //protocol
    function protocolFeeRatio() external view returns (uint64);
    /// @notice lookup table for whether a pool is owned by the factory
    function isFactoryPool(IPool pool) external view returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "./IFactory.sol";
interface IPool {
    event Swap(address sender, address recipient, bool tokenAIn, bool exactOutput, uint256 amountIn, uint256 amountOut, int32 activeTick);
    event AddLiquidity(address indexed sender, uint256 indexed tokenId, BinDelta[] binDeltas);
    event MigrateBinsUpStack(address indexed sender, uint128 binId, uint32 maxRecursion);
    event TransferLiquidity(uint256 fromTokenId, uint256 toTokenId, RemoveLiquidityParams[] params);
    event RemoveLiquidity(address indexed sender, address indexed recipient, uint256 indexed tokenId, BinDelta[] binDeltas);
    event BinMerged(uint128 indexed binId, uint128 reserveA, uint128 reserveB, uint128 mergeId);
    event BinMoved(uint128 indexed binId, int128 previousTick, int128 newTick);
    event ProtocolFeeCollected(uint256 protocolFee, bool isTokenA);
    event SetProtocolFeeRatio(uint256 protocolFee);
    /// @notice return parameters for Add/Remove liquidity
    /// @param binId of the bin that changed
    /// @param kind one of the 4 Kinds (0=static, 1=right, 2=left, 3=both)
    /// @param isActive bool to indicate whether the bin is still active
    /// @param lowerTick is the lower price tick of the bin in its current state
    /// @param deltaA amount of A token that has been added or removed
    /// @param deltaB amount of B token that has been added or removed
    /// @param deltaLpToken amount of LP balance that has increase (add) or decreased (remove)
    struct BinDelta {
        uint128 deltaA;
        uint128 deltaB;
        uint256 deltaLpBalance;
        uint128 binId;
        uint8 kind;
        int32 lowerTick;
        bool isActive;
    }
    /// @notice time weighted average state
    /// @param twa the twa at the last update instant
    /// @param value the new value that was passed in at the last update
    /// @param lastTimestamp timestamp of the last update in seconds
    /// @param lookback time in seconds
    struct TwaState {
        int96 twa;
        int96 value;
        uint64 lastTimestamp;
    }
    /// @notice bin state parameters
    /// @param kind one of the 4 Kinds (0=static, 1=right, 2=left, 3=both)
    /// @param lowerTick is the lower price tick of the bin in its current state
    /// @param mergeId binId of the bin that this bin has merged in to
    /// @param reserveA amount of A token in bin
    /// @param reserveB amount of B token in bin
    /// @param totalSupply total amount of LP tokens in this bin
    /// @param mergeBinBalance LP token balance that this bin posseses of the merge bin
    struct BinState {
        uint128 reserveA;
        uint128 reserveB;
        uint128 mergeBinBalance;
        uint128 mergeId;
        uint128 totalSupply;
        uint8 kind;
        int32 lowerTick;
    }
    /// @notice Parameters for each bin that will get new liquidity
    /// @param kind one of the 4 Kinds (0=static, 1=right, 2=left, 3=both)
    /// @param pos bin position
    /// @param isDelta bool that indicates whether the bin position is relative
    //to the current bin or an absolute position
    /// @param deltaA amount of A token to add
    /// @param deltaB amount of B token to add
    struct AddLiquidityParams {
        uint8 kind;
        int32 pos;
        bool isDelta;
        uint128 deltaA;
        uint128 deltaB;
    }
    /// @notice Parameters for each bin that will have liquidity removed
    /// @param binId index of the bin losing liquidity
    /// @param amount LP balance amount to remove
    struct RemoveLiquidityParams {
        uint128 binId;
        uint128 amount;
    }
    /// @notice State of the pool
    /// @param activeTick  current bin position that contains the active bins
    /// @param status pool status.  e.g. locked or unlocked; status values
    //defined in Pool.sol
    /// @param binCounter index of the last bin created
    /// @param protocolFeeRatio ratio of the swap fee that is kept for the
    //protocol
    struct State {
        int32 activeTick;
        uint8 status;
        uint128 binCounter;
        uint64 protocolFeeRatio;
    }
    /// @notice fee for pool in 18 decimal format
    function fee() external view returns (uint256);
    /// @notice tickSpacing of pool where 1.0001^tickSpacing is the bin width
    function tickSpacing() external view returns (uint256);
    /// @notice address of token A
    function tokenA() external view returns (IERC20);
    /// @notice address of token B
    function tokenB() external view returns (IERC20);
    /// @notice address of Factory
    function factory() external view returns (IFactory);
    /// @notice bitmap of active bins
    function binMap(int32 tick) external view returns (uint256);
    /// @notice mapping of tick/kind to binId
    function binPositions(int32 tick, uint256 kind) external view returns (uint128);
    /// @notice internal accounting of the sum tokenA balance across bins
    function binBalanceA() external view returns (uint128);
    /// @notice internal accounting of the sum tokenB balance across bins
    function binBalanceB() external view returns (uint128);
    /// @notice Twa state values
    function getTwa() external view returns (TwaState memory);
    /// @notice log base binWidth of the time weighted average price
    function getCurrentTwa() external view returns (int256);
    /// @notice pool state
    function getState() external view returns (State memory);
    /// @notice Add liquidity to a pool.
    /// @param tokenId NFT token ID that will hold the position
    /// @param params array of AddLiquidityParams that specify the mode and
    //position of the liquidity
    /// @param data callback function that addLiquidity will call so that the
    //caller can transfer tokens
    function addLiquidity(
        uint256 tokenId,
        AddLiquidityParams[] calldata params,
        bytes calldata data
    )
        external
        returns (
            uint256 tokenAAmount,
            uint256 tokenBAmount,
            BinDelta[] memory binDeltas
        );
    /// @notice Transfer liquidity in an array of bins from one nft tokenId
    //to another
    /// @param fromTokenId NFT token ID that holds the position being transferred
    /// @param toTokenId NFT token ID that is receiving liquidity
    /// @param params array of binIds and amounts to transfer
    function transferLiquidity(
        uint256 fromTokenId,
        uint256 toTokenId,
        RemoveLiquidityParams[] calldata params
    ) external;
    /// @notice Remove liquidity from a pool.
    /// @param recipient address that will receive the removed tokens
    /// @param tokenId NFT token ID that holds the position being removed
    /// @param params array of RemoveLiquidityParams that specify the bins,
    //and amounts
    function removeLiquidity(
        address recipient,
        uint256 tokenId,
        RemoveLiquidityParams[] calldata params
    )
        external
        returns (
            uint256 tokenAOut,
            uint256 tokenBOut,
            BinDelta[] memory binDeltas
        );
    /// @notice Migrate bins up the linked list of merged bins so that its
    //mergeId is the currrent active bin.
    /// @param binId is an array of the binIds to be migrated
    /// @param maxRecursion is the maximum recursion depth of the migration. set to
    //zero to recurse until the active bin is found.
    function migrateBinUpStack(uint128 binId, uint32 maxRecursion) external;
    /// @notice swap tokens
    /// @param recipient address that will receive the output tokens
    /// @param amount amount of token that is either the input if exactOutput
    //is false or the output if exactOutput is true
    /// @param tokenAIn bool indicating whether tokenA is the input
    /// @param exactOutput bool indicating whether the amount specified is the
    //exact output amount (true)
    /// @param sqrtPriceLimit limiting sqrt price of the swap.  A value of 0
    //indicates no limit.  Limit is only engaged for exactOutput=false.  If the
    //limit is reached only part of the input amount will be swapped and the
    //callback will only require that amount of the swap to be paid.
    /// @param data callback function that swap will call so that the
    //caller can transfer tokens
    function swap(
        address recipient,
        uint256 amount,
        bool tokenAIn,
        bool exactOutput,
        uint256 sqrtPriceLimit,
        bytes calldata data
    ) external returns (uint256 amountIn, uint256 amountOut);
    /// @notice bin information for a given binId
    function getBin(uint128 binId) external view returns (BinState memory bin);
    /// @notice LP token balance for a given tokenId at a given binId
    function balanceOf(uint256 tokenId, uint128 binId) external view returns (uint256 lpToken);
    /// @notice tokenA scale value
    /// @dev msb is a flag to indicate whether tokenA has more or less than 18
    //decimals.  Scale is used in conjuction with Math.toScale/Math.fromScale
    //functions to convert from token amounts to D18 scale internal pool
    //accounting.
    function tokenAScale() external view returns (uint256);
    /// @notice tokenB scale value
    /// @dev msb is a flag to indicate whether tokenA has more or less than 18
    //decimals.  Scale is used in conjuction with Math.toScale/Math.fromScale
    //functions to convert from token amounts to D18 scale internal pool
    //accounting.
    function tokenBScale() external view returns (uint256);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol";
import "../interfaces/IPositionMetadata.sol";
interface IPosition is IERC721Enumerable {
    event SetMetadata(IPositionMetadata metadata);
    /// @notice mint new position NFT
    function mint(address to) external returns (uint256 tokenId);
    /// @notice mint new position NFT
    function tokenOfOwnerByIndexExists(address owner, uint256 index) external view returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IPositionMetadata {
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
        }
        _balances[to] += amount;

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        _balances[account] += amount;
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
        }
        _totalSupply -= amount;

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/extensions/IERC721Enumerable.sol)

pragma solidity ^0.8.0;

import "../IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Enumerable is IERC721 {
    /**
     * @dev Returns the total amount of tokens stored by the contract.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns a token ID owned by `owner` at a given `index` of its token list.
     * Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
     */
    function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256);

    /**
     * @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
     * Use along with {totalSupply} to enumerate all tokens.
     */
    function tokenByIndex(uint256 index) external view returns (uint256);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/IERC721.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. It the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`.
        // We also know that `k`, the position of the most significant bit, is such that `msb(a) = 2**k`.
        // This gives `2**k < a <= 2**(k+1)` → `2**(k/2) <= sqrt(a) < 2 ** (k/2+1)`.
        // Using an algorithm similar to the msb conmputation, we are able to compute `result = 2**(k/2)` which is a
        // good first aproximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1;
        uint256 x = a;
        if (x >> 128 > 0) {
            x >>= 128;
            result <<= 64;
        }
        if (x >> 64 > 0) {
            x >>= 64;
            result <<= 32;
        }
        if (x >> 32 > 0) {
            x >>= 32;
            result <<= 16;
        }
        if (x >> 16 > 0) {
            x >>= 16;
            result <<= 8;
        }
        if (x >> 8 > 0) {
            x >>= 8;
            result <<= 4;
        }
        if (x >> 4 > 0) {
            x >>= 4;
            result <<= 2;
        }
        if (x >> 2 > 0) {
            result <<= 1;
        }

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        uint256 result = sqrt(a);
        if (rounding == Rounding.Up && result * result < a) {
            result += 1;
        }
        return result;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/math/SafeCast.sol)

pragma solidity ^0.8.0;

/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 *
 * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
 * all math on `uint256` and `int256` and then downcasting.
 */
library SafeCast {
    /**
     * @dev Returns the downcasted uint248 from uint256, reverting on
     * overflow (when the input is greater than largest uint248).
     *
     * Counterpart to Solidity's `uint248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     *
     * _Available since v4.7._
     */
    function toUint248(uint256 value) internal pure returns (uint248) {
        require(value <= type(uint248).max, "SafeCast: value doesn't fit in 248 bits");
        return uint248(value);
    }

    /**
     * @dev Returns the downcasted uint240 from uint256, reverting on
     * overflow (when the input is greater than largest uint240).
     *
     * Counterpart to Solidity's `uint240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     *
     * _Available since v4.7._
     */
    function toUint240(uint256 value) internal pure returns (uint240) {
        require(value <= type(uint240).max, "SafeCast: value doesn't fit in 240 bits");
        return uint240(value);
    }

    /**
     * @dev Returns the downcasted uint232 from uint256, reverting on
     * overflow (when the input is greater than largest uint232).
     *
     * Counterpart to Solidity's `uint232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     *
     * _Available since v4.7._
     */
    function toUint232(uint256 value) internal pure returns (uint232) {
        require(value <= type(uint232).max, "SafeCast: value doesn't fit in 232 bits");
        return uint232(value);
    }

    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     *
     * _Available since v4.2._
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint216 from uint256, reverting on
     * overflow (when the input is greater than largest uint216).
     *
     * Counterpart to Solidity's `uint216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     *
     * _Available since v4.7._
     */
    function toUint216(uint256 value) internal pure returns (uint216) {
        require(value <= type(uint216).max, "SafeCast: value doesn't fit in 216 bits");
        return uint216(value);
    }

    /**
     * @dev Returns the downcasted uint208 from uint256, reverting on
     * overflow (when the input is greater than largest uint208).
     *
     * Counterpart to Solidity's `uint208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     *
     * _Available since v4.7._
     */
    function toUint208(uint256 value) internal pure returns (uint208) {
        require(value <= type(uint208).max, "SafeCast: value doesn't fit in 208 bits");
        return uint208(value);
    }

    /**
     * @dev Returns the downcasted uint200 from uint256, reverting on
     * overflow (when the input is greater than largest uint200).
     *
     * Counterpart to Solidity's `uint200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     *
     * _Available since v4.7._
     */
    function toUint200(uint256 value) internal pure returns (uint200) {
        require(value <= type(uint200).max, "SafeCast: value doesn't fit in 200 bits");
        return uint200(value);
    }

    /**
     * @dev Returns the downcasted uint192 from uint256, reverting on
     * overflow (when the input is greater than largest uint192).
     *
     * Counterpart to Solidity's `uint192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     *
     * _Available since v4.7._
     */
    function toUint192(uint256 value) internal pure returns (uint192) {
        require(value <= type(uint192).max, "SafeCast: value doesn't fit in 192 bits");
        return uint192(value);
    }

    /**
     * @dev Returns the downcasted uint184 from uint256, reverting on
     * overflow (when the input is greater than largest uint184).
     *
     * Counterpart to Solidity's `uint184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     *
     * _Available since v4.7._
     */
    function toUint184(uint256 value) internal pure returns (uint184) {
        require(value <= type(uint184).max, "SafeCast: value doesn't fit in 184 bits");
        return uint184(value);
    }

    /**
     * @dev Returns the downcasted uint176 from uint256, reverting on
     * overflow (when the input is greater than largest uint176).
     *
     * Counterpart to Solidity's `uint176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     *
     * _Available since v4.7._
     */
    function toUint176(uint256 value) internal pure returns (uint176) {
        require(value <= type(uint176).max, "SafeCast: value doesn't fit in 176 bits");
        return uint176(value);
    }

    /**
     * @dev Returns the downcasted uint168 from uint256, reverting on
     * overflow (when the input is greater than largest uint168).
     *
     * Counterpart to Solidity's `uint168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     *
     * _Available since v4.7._
     */
    function toUint168(uint256 value) internal pure returns (uint168) {
        require(value <= type(uint168).max, "SafeCast: value doesn't fit in 168 bits");
        return uint168(value);
    }

    /**
     * @dev Returns the downcasted uint160 from uint256, reverting on
     * overflow (when the input is greater than largest uint160).
     *
     * Counterpart to Solidity's `uint160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     *
     * _Available since v4.7._
     */
    function toUint160(uint256 value) internal pure returns (uint160) {
        require(value <= type(uint160).max, "SafeCast: value doesn't fit in 160 bits");
        return uint160(value);
    }

    /**
     * @dev Returns the downcasted uint152 from uint256, reverting on
     * overflow (when the input is greater than largest uint152).
     *
     * Counterpart to Solidity's `uint152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     *
     * _Available since v4.7._
     */
    function toUint152(uint256 value) internal pure returns (uint152) {
        require(value <= type(uint152).max, "SafeCast: value doesn't fit in 152 bits");
        return uint152(value);
    }

    /**
     * @dev Returns the downcasted uint144 from uint256, reverting on
     * overflow (when the input is greater than largest uint144).
     *
     * Counterpart to Solidity's `uint144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     *
     * _Available since v4.7._
     */
    function toUint144(uint256 value) internal pure returns (uint144) {
        require(value <= type(uint144).max, "SafeCast: value doesn't fit in 144 bits");
        return uint144(value);
    }

    /**
     * @dev Returns the downcasted uint136 from uint256, reverting on
     * overflow (when the input is greater than largest uint136).
     *
     * Counterpart to Solidity's `uint136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     *
     * _Available since v4.7._
     */
    function toUint136(uint256 value) internal pure returns (uint136) {
        require(value <= type(uint136).max, "SafeCast: value doesn't fit in 136 bits");
        return uint136(value);
    }

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v2.5._
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint120 from uint256, reverting on
     * overflow (when the input is greater than largest uint120).
     *
     * Counterpart to Solidity's `uint120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     *
     * _Available since v4.7._
     */
    function toUint120(uint256 value) internal pure returns (uint120) {
        require(value <= type(uint120).max, "SafeCast: value doesn't fit in 120 bits");
        return uint120(value);
    }

    /**
     * @dev Returns the downcasted uint112 from uint256, reverting on
     * overflow (when the input is greater than largest uint112).
     *
     * Counterpart to Solidity's `uint112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     *
     * _Available since v4.7._
     */
    function toUint112(uint256 value) internal pure returns (uint112) {
        require(value <= type(uint112).max, "SafeCast: value doesn't fit in 112 bits");
        return uint112(value);
    }

    /**
     * @dev Returns the downcasted uint104 from uint256, reverting on
     * overflow (when the input is greater than largest uint104).
     *
     * Counterpart to Solidity's `uint104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     *
     * _Available since v4.7._
     */
    function toUint104(uint256 value) internal pure returns (uint104) {
        require(value <= type(uint104).max, "SafeCast: value doesn't fit in 104 bits");
        return uint104(value);
    }

    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     *
     * _Available since v4.2._
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
        return uint96(value);
    }

    /**
     * @dev Returns the downcasted uint88 from uint256, reverting on
     * overflow (when the input is greater than largest uint88).
     *
     * Counterpart to Solidity's `uint88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     *
     * _Available since v4.7._
     */
    function toUint88(uint256 value) internal pure returns (uint88) {
        require(value <= type(uint88).max, "SafeCast: value doesn't fit in 88 bits");
        return uint88(value);
    }

    /**
     * @dev Returns the downcasted uint80 from uint256, reverting on
     * overflow (when the input is greater than largest uint80).
     *
     * Counterpart to Solidity's `uint80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     *
     * _Available since v4.7._
     */
    function toUint80(uint256 value) internal pure returns (uint80) {
        require(value <= type(uint80).max, "SafeCast: value doesn't fit in 80 bits");
        return uint80(value);
    }

    /**
     * @dev Returns the downcasted uint72 from uint256, reverting on
     * overflow (when the input is greater than largest uint72).
     *
     * Counterpart to Solidity's `uint72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     *
     * _Available since v4.7._
     */
    function toUint72(uint256 value) internal pure returns (uint72) {
        require(value <= type(uint72).max, "SafeCast: value doesn't fit in 72 bits");
        return uint72(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v2.5._
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint56 from uint256, reverting on
     * overflow (when the input is greater than largest uint56).
     *
     * Counterpart to Solidity's `uint56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     *
     * _Available since v4.7._
     */
    function toUint56(uint256 value) internal pure returns (uint56) {
        require(value <= type(uint56).max, "SafeCast: value doesn't fit in 56 bits");
        return uint56(value);
    }

    /**
     * @dev Returns the downcasted uint48 from uint256, reverting on
     * overflow (when the input is greater than largest uint48).
     *
     * Counterpart to Solidity's `uint48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     *
     * _Available since v4.7._
     */
    function toUint48(uint256 value) internal pure returns (uint48) {
        require(value <= type(uint48).max, "SafeCast: value doesn't fit in 48 bits");
        return uint48(value);
    }

    /**
     * @dev Returns the downcasted uint40 from uint256, reverting on
     * overflow (when the input is greater than largest uint40).
     *
     * Counterpart to Solidity's `uint40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     *
     * _Available since v4.7._
     */
    function toUint40(uint256 value) internal pure returns (uint40) {
        require(value <= type(uint40).max, "SafeCast: value doesn't fit in 40 bits");
        return uint40(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v2.5._
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint24 from uint256, reverting on
     * overflow (when the input is greater than largest uint24).
     *
     * Counterpart to Solidity's `uint24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     *
     * _Available since v4.7._
     */
    function toUint24(uint256 value) internal pure returns (uint24) {
        require(value <= type(uint24).max, "SafeCast: value doesn't fit in 24 bits");
        return uint24(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v2.5._
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     *
     * _Available since v2.5._
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     *
     * _Available since v3.0._
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        require(value >= 0, "SafeCast: value must be positive");
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int248 from int256, reverting on
     * overflow (when the input is less than smallest int248 or
     * greater than largest int248).
     *
     * Counterpart to Solidity's `int248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     *
     * _Available since v4.7._
     */
    function toInt248(int256 value) internal pure returns (int248) {
        require(value >= type(int248).min && value <= type(int248).max, "SafeCast: value doesn't fit in 248 bits");
        return int248(value);
    }

    /**
     * @dev Returns the downcasted int240 from int256, reverting on
     * overflow (when the input is less than smallest int240 or
     * greater than largest int240).
     *
     * Counterpart to Solidity's `int240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     *
     * _Available since v4.7._
     */
    function toInt240(int256 value) internal pure returns (int240) {
        require(value >= type(int240).min && value <= type(int240).max, "SafeCast: value doesn't fit in 240 bits");
        return int240(value);
    }

    /**
     * @dev Returns the downcasted int232 from int256, reverting on
     * overflow (when the input is less than smallest int232 or
     * greater than largest int232).
     *
     * Counterpart to Solidity's `int232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     *
     * _Available since v4.7._
     */
    function toInt232(int256 value) internal pure returns (int232) {
        require(value >= type(int232).min && value <= type(int232).max, "SafeCast: value doesn't fit in 232 bits");
        return int232(value);
    }

    /**
     * @dev Returns the downcasted int224 from int256, reverting on
     * overflow (when the input is less than smallest int224 or
     * greater than largest int224).
     *
     * Counterpart to Solidity's `int224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     *
     * _Available since v4.7._
     */
    function toInt224(int256 value) internal pure returns (int224) {
        require(value >= type(int224).min && value <= type(int224).max, "SafeCast: value doesn't fit in 224 bits");
        return int224(value);
    }

    /**
     * @dev Returns the downcasted int216 from int256, reverting on
     * overflow (when the input is less than smallest int216 or
     * greater than largest int216).
     *
     * Counterpart to Solidity's `int216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     *
     * _Available since v4.7._
     */
    function toInt216(int256 value) internal pure returns (int216) {
        require(value >= type(int216).min && value <= type(int216).max, "SafeCast: value doesn't fit in 216 bits");
        return int216(value);
    }

    /**
     * @dev Returns the downcasted int208 from int256, reverting on
     * overflow (when the input is less than smallest int208 or
     * greater than largest int208).
     *
     * Counterpart to Solidity's `int208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     *
     * _Available since v4.7._
     */
    function toInt208(int256 value) internal pure returns (int208) {
        require(value >= type(int208).min && value <= type(int208).max, "SafeCast: value doesn't fit in 208 bits");
        return int208(value);
    }

    /**
     * @dev Returns the downcasted int200 from int256, reverting on
     * overflow (when the input is less than smallest int200 or
     * greater than largest int200).
     *
     * Counterpart to Solidity's `int200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     *
     * _Available since v4.7._
     */
    function toInt200(int256 value) internal pure returns (int200) {
        require(value >= type(int200).min && value <= type(int200).max, "SafeCast: value doesn't fit in 200 bits");
        return int200(value);
    }

    /**
     * @dev Returns the downcasted int192 from int256, reverting on
     * overflow (when the input is less than smallest int192 or
     * greater than largest int192).
     *
     * Counterpart to Solidity's `int192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     *
     * _Available since v4.7._
     */
    function toInt192(int256 value) internal pure returns (int192) {
        require(value >= type(int192).min && value <= type(int192).max, "SafeCast: value doesn't fit in 192 bits");
        return int192(value);
    }

    /**
     * @dev Returns the downcasted int184 from int256, reverting on
     * overflow (when the input is less than smallest int184 or
     * greater than largest int184).
     *
     * Counterpart to Solidity's `int184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     *
     * _Available since v4.7._
     */
    function toInt184(int256 value) internal pure returns (int184) {
        require(value >= type(int184).min && value <= type(int184).max, "SafeCast: value doesn't fit in 184 bits");
        return int184(value);
    }

    /**
     * @dev Returns the downcasted int176 from int256, reverting on
     * overflow (when the input is less than smallest int176 or
     * greater than largest int176).
     *
     * Counterpart to Solidity's `int176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     *
     * _Available since v4.7._
     */
    function toInt176(int256 value) internal pure returns (int176) {
        require(value >= type(int176).min && value <= type(int176).max, "SafeCast: value doesn't fit in 176 bits");
        return int176(value);
    }

    /**
     * @dev Returns the downcasted int168 from int256, reverting on
     * overflow (when the input is less than smallest int168 or
     * greater than largest int168).
     *
     * Counterpart to Solidity's `int168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     *
     * _Available since v4.7._
     */
    function toInt168(int256 value) internal pure returns (int168) {
        require(value >= type(int168).min && value <= type(int168).max, "SafeCast: value doesn't fit in 168 bits");
        return int168(value);
    }

    /**
     * @dev Returns the downcasted int160 from int256, reverting on
     * overflow (when the input is less than smallest int160 or
     * greater than largest int160).
     *
     * Counterpart to Solidity's `int160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     *
     * _Available since v4.7._
     */
    function toInt160(int256 value) internal pure returns (int160) {
        require(value >= type(int160).min && value <= type(int160).max, "SafeCast: value doesn't fit in 160 bits");
        return int160(value);
    }

    /**
     * @dev Returns the downcasted int152 from int256, reverting on
     * overflow (when the input is less than smallest int152 or
     * greater than largest int152).
     *
     * Counterpart to Solidity's `int152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     *
     * _Available since v4.7._
     */
    function toInt152(int256 value) internal pure returns (int152) {
        require(value >= type(int152).min && value <= type(int152).max, "SafeCast: value doesn't fit in 152 bits");
        return int152(value);
    }

    /**
     * @dev Returns the downcasted int144 from int256, reverting on
     * overflow (when the input is less than smallest int144 or
     * greater than largest int144).
     *
     * Counterpart to Solidity's `int144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     *
     * _Available since v4.7._
     */
    function toInt144(int256 value) internal pure returns (int144) {
        require(value >= type(int144).min && value <= type(int144).max, "SafeCast: value doesn't fit in 144 bits");
        return int144(value);
    }

    /**
     * @dev Returns the downcasted int136 from int256, reverting on
     * overflow (when the input is less than smallest int136 or
     * greater than largest int136).
     *
     * Counterpart to Solidity's `int136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     *
     * _Available since v4.7._
     */
    function toInt136(int256 value) internal pure returns (int136) {
        require(value >= type(int136).min && value <= type(int136).max, "SafeCast: value doesn't fit in 136 bits");
        return int136(value);
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v3.1._
     */
    function toInt128(int256 value) internal pure returns (int128) {
        require(value >= type(int128).min && value <= type(int128).max, "SafeCast: value doesn't fit in 128 bits");
        return int128(value);
    }

    /**
     * @dev Returns the downcasted int120 from int256, reverting on
     * overflow (when the input is less than smallest int120 or
     * greater than largest int120).
     *
     * Counterpart to Solidity's `int120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     *
     * _Available since v4.7._
     */
    function toInt120(int256 value) internal pure returns (int120) {
        require(value >= type(int120).min && value <= type(int120).max, "SafeCast: value doesn't fit in 120 bits");
        return int120(value);
    }

    /**
     * @dev Returns the downcasted int112 from int256, reverting on
     * overflow (when the input is less than smallest int112 or
     * greater than largest int112).
     *
     * Counterpart to Solidity's `int112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     *
     * _Available since v4.7._
     */
    function toInt112(int256 value) internal pure returns (int112) {
        require(value >= type(int112).min && value <= type(int112).max, "SafeCast: value doesn't fit in 112 bits");
        return int112(value);
    }

    /**
     * @dev Returns the downcasted int104 from int256, reverting on
     * overflow (when the input is less than smallest int104 or
     * greater than largest int104).
     *
     * Counterpart to Solidity's `int104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     *
     * _Available since v4.7._
     */
    function toInt104(int256 value) internal pure returns (int104) {
        require(value >= type(int104).min && value <= type(int104).max, "SafeCast: value doesn't fit in 104 bits");
        return int104(value);
    }

    /**
     * @dev Returns the downcasted int96 from int256, reverting on
     * overflow (when the input is less than smallest int96 or
     * greater than largest int96).
     *
     * Counterpart to Solidity's `int96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     *
     * _Available since v4.7._
     */
    function toInt96(int256 value) internal pure returns (int96) {
        require(value >= type(int96).min && value <= type(int96).max, "SafeCast: value doesn't fit in 96 bits");
        return int96(value);
    }

    /**
     * @dev Returns the downcasted int88 from int256, reverting on
     * overflow (when the input is less than smallest int88 or
     * greater than largest int88).
     *
     * Counterpart to Solidity's `int88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     *
     * _Available since v4.7._
     */
    function toInt88(int256 value) internal pure returns (int88) {
        require(value >= type(int88).min && value <= type(int88).max, "SafeCast: value doesn't fit in 88 bits");
        return int88(value);
    }

    /**
     * @dev Returns the downcasted int80 from int256, reverting on
     * overflow (when the input is less than smallest int80 or
     * greater than largest int80).
     *
     * Counterpart to Solidity's `int80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     *
     * _Available since v4.7._
     */
    function toInt80(int256 value) internal pure returns (int80) {
        require(value >= type(int80).min && value <= type(int80).max, "SafeCast: value doesn't fit in 80 bits");
        return int80(value);
    }

    /**
     * @dev Returns the downcasted int72 from int256, reverting on
     * overflow (when the input is less than smallest int72 or
     * greater than largest int72).
     *
     * Counterpart to Solidity's `int72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     *
     * _Available since v4.7._
     */
    function toInt72(int256 value) internal pure returns (int72) {
        require(value >= type(int72).min && value <= type(int72).max, "SafeCast: value doesn't fit in 72 bits");
        return int72(value);
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v3.1._
     */
    function toInt64(int256 value) internal pure returns (int64) {
        require(value >= type(int64).min && value <= type(int64).max, "SafeCast: value doesn't fit in 64 bits");
        return int64(value);
    }

    /**
     * @dev Returns the downcasted int56 from int256, reverting on
     * overflow (when the input is less than smallest int56 or
     * greater than largest int56).
     *
     * Counterpart to Solidity's `int56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     *
     * _Available since v4.7._
     */
    function toInt56(int256 value) internal pure returns (int56) {
        require(value >= type(int56).min && value <= type(int56).max, "SafeCast: value doesn't fit in 56 bits");
        return int56(value);
    }

    /**
     * @dev Returns the downcasted int48 from int256, reverting on
     * overflow (when the input is less than smallest int48 or
     * greater than largest int48).
     *
     * Counterpart to Solidity's `int48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     *
     * _Available since v4.7._
     */
    function toInt48(int256 value) internal pure returns (int48) {
        require(value >= type(int48).min && value <= type(int48).max, "SafeCast: value doesn't fit in 48 bits");
        return int48(value);
    }

    /**
     * @dev Returns the downcasted int40 from int256, reverting on
     * overflow (when the input is less than smallest int40 or
     * greater than largest int40).
     *
     * Counterpart to Solidity's `int40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     *
     * _Available since v4.7._
     */
    function toInt40(int256 value) internal pure returns (int40) {
        require(value >= type(int40).min && value <= type(int40).max, "SafeCast: value doesn't fit in 40 bits");
        return int40(value);
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v3.1._
     */
    function toInt32(int256 value) internal pure returns (int32) {
        require(value >= type(int32).min && value <= type(int32).max, "SafeCast: value doesn't fit in 32 bits");
        return int32(value);
    }

    /**
     * @dev Returns the downcasted int24 from int256, reverting on
     * overflow (when the input is less than smallest int24 or
     * greater than largest int24).
     *
     * Counterpart to Solidity's `int24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     *
     * _Available since v4.7._
     */
    function toInt24(int256 value) internal pure returns (int24) {
        require(value >= type(int24).min && value <= type(int24).max, "SafeCast: value doesn't fit in 24 bits");
        return int24(value);
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v3.1._
     */
    function toInt16(int256 value) internal pure returns (int16) {
        require(value >= type(int16).min && value <= type(int16).max, "SafeCast: value doesn't fit in 16 bits");
        return int16(value);
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     *
     * _Available since v3.1._
     */
    function toInt8(int256 value) internal pure returns (int8) {
        require(value >= type(int8).min && value <= type(int8).max, "SafeCast: value doesn't fit in 8 bits");
        return int8(value);
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     *
     * _Available since v3.0._
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
        return int256(value);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;

import {IERC20Metadata} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";

import {IPool} from "@maverickprotocol/maverick-v1-interfaces/contracts/interfaces/IPool.sol";

interface IPoolPositionSlim is IERC20Metadata {
    error InvalidBinIds(uint128[] binIds);
    error InvalidRatio();
    error BinIsMerged();
    error InvalidTokenId(uint256 tokenId);

    event MigrateBinLiquidity(uint128 oldBinId, uint128 newBinId);

    function allBinIds() external view returns (uint128[] memory);

    function binIds(uint256) external view returns (uint128);

    function ratios(uint256) external view returns (uint128);

    /// @notice tokenId that holds PP assets
    function tokenId() external view returns (uint256);

    /// @notice Pool that the position exists in
    function pool() external view returns (IPool);

    /// @notice Whether or not the PP contains all static bins as opposed to
    //movement bins
    function isStatic() external view returns (bool);

    /// @notice Returns struct array of bin lp amounts that need to be transfered for a mint
    /// @param  binZeroLpAddAmount LP amount of bin[0] to be added
    function binLpAddAmountRequirement(uint128 binZeroLpAddAmount) external view returns (IPool.RemoveLiquidityParams[] memory params);

    /// @notice Burns PoolPosition ERC20 tokens from given account and
    //trasnfers Pool liquidity position to toTokenId
    /// @param account wallet or contract whose PoolPosition tokens will be
    //burned
    /// @param toTokenId pool.position() that will own the output liquidity
    /// @param lpAmountToUnStake number of PoolPosition LPs tokens to burn
    function burnFromToTokenIdAsBinLiquidity(address account, uint256 toTokenId, uint256 lpAmountToUnStake) external returns (IPool.RemoveLiquidityParams[] memory params);

    /// @notice Burns PoolPosition ERC20 tokens and trasnfers resulting
    //liquidity as A/B tokens to recipient
    /// @param account wallet or contract whose PoolPosition tokens will be
    //burned
    /// @param recipient pool.position() that will own the output tokens
    /// @param lpAmountToUnStake number of PoolPosition LPs tokens to burn
    function burnFromToAddressAsReserves(address account, address recipient, uint256 lpAmountToUnStake) external returns (uint256 amountA, uint256 amountB);

    /// @notice Migrates the PoolPosition liquidity to active bin if the
    //liquidity is currently merged
    /// @dev Migrating only applies to one-bin dynamic-kind PoolPositions and
    //it must be called before any other external call will execute if the bin
    //in the PoolPosition has been merged.
    function migrateBinLiquidity() external;

    /// @notice Mint new PoolPosition tokens
    /// @param to wallet or contract where PoolPosition tokens will be minted
    /// @param fromTokenId pool.position() that will contribute input liquidity
    /// @param binZeroLpAddAmount LP balance of pool.position() in PoolPosition
    //bins[0] to be transfered
    //  @return liquidity number of PoolPosition LP tokens minted
    function mint(address to, uint256 fromTokenId, uint128 binZeroLpAddAmount) external returns (uint256 liquidity);

    /// @notice Amount of pool.tokenA() and pool.tokenB() tokens held by the
    //PoolPosition
    //  @return reserveA Amount of pool.tokenA() tokens held by the
    //  PoolPosition
    //  @return reserveB Amount of pool.tokenB() tokens held by the
    //  PoolPosition
    function getReserves() external view returns (uint256 reserveA, uint256 reserveB);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;

import {IERC20Metadata} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import {Strings} from "@openzeppelin/contracts/utils/Strings.sol";

import {IPool} from "@maverickprotocol/maverick-v1-interfaces/contracts/interfaces/IPool.sol";

library Utilities {
    function nameMaker(IPool _pool, uint256 factoryCount, bool fullName) internal view returns (string memory) {
        return
            string(
                abi.encodePacked(
                    fullName ? "Maverick Position-" : "MP-",
                    IERC20Metadata(address(_pool.tokenA())).symbol(),
                    "-",
                    IERC20Metadata(address(_pool.tokenB())).symbol(),
                    "-",
                    Strings.toString(factoryCount)
                )
            );
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 100000
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "metadata": {
    "useLiteralContent": true
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"contract IPool","name":"_pool","type":"address"},{"internalType":"uint128[]","name":"_binIds","type":"uint128[]"},{"internalType":"uint128[]","name":"_ratios","type":"uint128[]"},{"internalType":"uint256","name":"factoryCount","type":"uint256"},{"internalType":"bool","name":"_isStatic","type":"bool"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"BinIsMerged","type":"error"},{"inputs":[{"internalType":"uint128[]","name":"binIds","type":"uint128[]"}],"name":"InvalidBinIds","type":"error"},{"inputs":[],"name":"InvalidRatio","type":"error"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"InvalidTokenId","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint128","name":"oldBinId","type":"uint128"},{"indexed":false,"internalType":"uint128","name":"newBinId","type":"uint128"}],"name":"MigrateBinLiquidity","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"allBinIds","outputs":[{"internalType":"uint128[]","name":"","type":"uint128[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"binIds","outputs":[{"internalType":"uint128","name":"","type":"uint128"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint128","name":"binZeroLpAddAmount","type":"uint128"}],"name":"binLpAddAmountRequirement","outputs":[{"components":[{"internalType":"uint128","name":"binId","type":"uint128"},{"internalType":"uint128","name":"amount","type":"uint128"}],"internalType":"struct IPool.RemoveLiquidityParams[]","name":"params","type":"tuple[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"lpAmountToUnStake","type":"uint256"}],"name":"burnFromToAddressAsReserves","outputs":[{"internalType":"uint256","name":"amountA","type":"uint256"},{"internalType":"uint256","name":"amountB","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"toTokenId","type":"uint256"},{"internalType":"uint256","name":"lpAmountToUnStake","type":"uint256"}],"name":"burnFromToTokenIdAsBinLiquidity","outputs":[{"components":[{"internalType":"uint128","name":"binId","type":"uint128"},{"internalType":"uint128","name":"amount","type":"uint128"}],"internalType":"struct IPool.RemoveLiquidityParams[]","name":"params","type":"tuple[]"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"getReserves","outputs":[{"internalType":"uint256","name":"reserveA","type":"uint256"},{"internalType":"uint256","name":"reserveB","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"isStatic","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"migrateBinLiquidity","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"fromTokenId","type":"uint256"},{"internalType":"uint128","name":"binZeroLpAddAmount","type":"uint128"}],"name":"mint","outputs":[{"internalType":"uint256","name":"amountMinted","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pool","outputs":[{"internalType":"contract IPool","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"ratios","outputs":[{"internalType":"uint128","name":"","type":"uint128"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"tokenId","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"}]

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