Contract

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: GPL-3.0-only

pragma solidity 0.8.18;

import "./CallWhitelist.sol";
import "./CallWhitelistDelegation.sol";
import "./CallWhitelistApprovals.sol";

/**
 * @title CallWhitelistAllExtensions
 * @author Non-Fungible Technologies, Inc.
 *
 * CallWhitelist with both the approvals and delegation extension.
 * See CallWhitelist, CallWhitelistApprovals, and CallWhitelistDelegation
 * contract descriptions for more information.
 */
contract CallWhitelistAllExtensions is CallWhitelist, CallWhitelistApprovals, CallWhitelistDelegation {

    /// @dev Deploys the contracts with the needed inherited behavior.
    constructor(address _registry) CallWhitelistDelegation(_registry) {}
}

// SPDX-License-Identifier: GPL-3.0-only

pragma solidity 0.8.18;

import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/access/AccessControlEnumerable.sol";

import "../interfaces/ICallWhitelist.sol";

import "./CallBlacklist.sol";

import {
    CW_AlreadyWhitelisted,
    CW_NotWhitelisted
} from "../errors/Vault.sol";

/**
 * @title CallWhitelist
 * @author Non-Fungible Technologies, Inc.
 *
 * Maintains a whitelist for calls that can be made from an AssetVault.
 * Intended to be used to allow for "claim" and other-utility based
 * functions while an asset is being held in escrow. Some functions
 * are blacklisted, e.g. transfer functions, to prevent callers from
 * being able to circumvent withdrawal rules for escrowed assets.
 * Whitelists are specified in terms of "target contract" (callee)
 * and function selector.
 *
 * The contract owner can add or remove items from the whitelist.
 */
contract CallWhitelist is AccessControlEnumerable, CallBlacklist, ICallWhitelist {
    using SafeERC20 for IERC20;

    // ============================================ STATE ==============================================

    // =================== Constants =====================

    bytes32 public constant ADMIN_ROLE = keccak256("ADMIN");
    bytes32 public constant WHITELIST_MANAGER_ROLE = keccak256("WHITELIST_MANAGER");

    // ================= Whitelist State ==================

    /**
     * @notice Whitelist of callable functions on contracts. Maps addresses that
     *         can be called to function selectors which can be called on it.
     *         For example, if we want to allow function call 0x0000 on a contract
     *         at 0x1111, the mapping will contain whitelist[0x1111][0x0000] = true.
     */
    mapping(address => mapping(bytes4 => bool)) private whitelist;

    // ========================================= CONSTRUCTOR ===========================================

    /**
     * @notice Creates a new call whitelist contract, setting up required roles.
     */
    constructor() {
        _setupRole(ADMIN_ROLE, msg.sender);

        _setRoleAdmin(ADMIN_ROLE, ADMIN_ROLE);
        _setRoleAdmin(WHITELIST_MANAGER_ROLE, ADMIN_ROLE);
    }

    // ========================================= VIEW FUNCTIONS =========================================

    /**
     * @notice Returns true if the given function on the given callee is whitelisted.
     *
     * @param callee                The contract that is intended to be called.
     * @param selector              The function selector that is intended to be called.
     *
     * @return isWhitelisted        True if whitelisted, else false.
     */
    function isWhitelisted(address callee, bytes4 selector) external view override returns (bool) {
        return !isBlacklisted(selector) && whitelist[callee][selector];
    }

    // ======================================== UPDATE OPERATIONS =======================================

    /**
     * @notice Add the given callee and selector to the whitelist. Can only be called by owner.
     *
     * @dev    A blacklist supersedes a whitelist, so should not add blacklisted selectors.
     *         Calls which are already whitelisted will revert.
     *
     * @param callee                The contract to whitelist.
     * @param selector              The function selector to whitelist.
     */
    function add(address callee, bytes4 selector) external override onlyRole(WHITELIST_MANAGER_ROLE) {
        mapping(bytes4 => bool) storage calleeWhitelist = whitelist[callee];

        if (calleeWhitelist[selector]) revert CW_AlreadyWhitelisted(callee, selector);
        calleeWhitelist[selector] = true;

        emit CallAdded(msg.sender, callee, selector);
    }

    /**
     * @notice Remove the given callee and selector from the whitelist. Can only be called by owner.
     *
     * @dev   Calls which are not already whitelisted will revert.
     *
     * @param callee                The contract to whitelist.
     * @param selector              The function selector to whitelist.
     */
    function remove(address callee, bytes4 selector) external override onlyRole(WHITELIST_MANAGER_ROLE) {
        mapping(bytes4 => bool) storage calleeWhitelist = whitelist[callee];

        if (!calleeWhitelist[selector]) revert CW_NotWhitelisted(callee, selector);
        calleeWhitelist[selector] = false;

        emit CallRemoved(msg.sender, callee, selector);
    }
}

// SPDX-License-Identifier: GPL-3.0-only

pragma solidity 0.8.18;

import "../external/interfaces/IDelegationRegistry.sol";

import "./CallWhitelist.sol";

import { CWD_RegistryAlreadySet, CWD_ZeroAddress } from "../errors/Vault.sol";

/**
 * @title CallWhitelistDelegation
 * @author Non-Fungible Technologies, Inc.
 *
 * Adds delegation functionality to CallWhitelist, allowing the
 * whitelist manager to decide which collections can be used with
 * the DelegateCash registry. Each token should be considered for
 * possible implications of delegation before adding to the whitelist.
 *
 * If a token is on the whitelist, delegateForContract and delegateForToken
 * will be enabled for that token.
 *
 * WARNING: adding these functions to the core CallWhitelist whitelist will bypass
 * the delegation functions that check the whitelist for which tokens can
 * be delegated. The whitelist manager should take care not to use both the core
 * whitelist for delegation as well as the delegation whitelist.
 */
contract CallWhitelistDelegation is CallWhitelist {
    event DelegationSet(address indexed caller, address indexed token, bool isApproved);
    event RegistryChanged(address indexed caller, address indexed registry);

    // ============================================ STATE ==============================================

    // ================= Whitelist State ==================

    /// @notice Tokens approved for delegation.
    /// @dev    token -> isApproved
    mapping(address => bool) private delegationApproved;

    /// @notice The delegation registry for the whitelist.
    IDelegationRegistry public registry;

    // ========================================== CONSTRUCTOR ===========================================

    /**
     * @dev Initializes values so initialize cannot be called on template.
     */
    constructor(address _registry) {
        if (_registry == address(0)) revert CWD_ZeroAddress();

        registry = IDelegationRegistry(_registry);
    }

    // ========================================= VIEW FUNCTIONS =========================================

    /**
     * @notice Returns true if the given spender is approved to spend the given token.
     *
     * @param token                     The token approval to check.
     *
     * @return isDelegationApproved     True if the token can be delegated, else false.
     */
    function isDelegationApproved(address token) public view returns (bool) {
        return delegationApproved[token];
    }

    // ======================================== UPDATE OPERATIONS =======================================

    /**
     * @notice Sets approval status of a given token for a spender. Note that this is
     *         NOT a token approval - it is permission to register a delegation from
     *         the vault.
     *
     * @param token                The token approval to set.
     * @param _isApproved          Whether the token should be approved.
     */
    function setDelegationApproval(address token, bool _isApproved) external onlyRole(WHITELIST_MANAGER_ROLE) {
        delegationApproved[token] = _isApproved;

        emit DelegationSet(msg.sender, token, _isApproved);
    }

    /**
     * @notice Sets the registry for the whitelist. Should only be used in case
     *         of delegate cash migration to new registry.
     *
     * @param _registry             The new registry.
     */
    function setRegistry(address _registry) external onlyRole(ADMIN_ROLE) {
        if (address(registry) == _registry) revert CWD_RegistryAlreadySet();

        registry = IDelegationRegistry(_registry);

        emit RegistryChanged(msg.sender, _registry);
    }
}

// SPDX-License-Identifier: GPL-3.0-only

pragma solidity 0.8.18;

import "./CallWhitelist.sol";

/**
 * @title CallWhitelistApprovals
 * @author Non-Fungible Technologies, Inc.
 *
 * Adds approvals functionality to CallWhitelist. Certain spenders
 * can be approved for tokens on vaults, with the requisite ability
 * to withdraw. Should not be used for tokens acting as collateral.
 *
 * The contract owner can add or remove approved token/spender pairs.
 */
contract CallWhitelistApprovals is CallWhitelist {
    event ApprovalSet(address indexed caller, address indexed token, address indexed spender, bool isApproved);

    // ============================================ STATE ==============================================

    // ================= Whitelist State ==================

    /// @notice Approved spenders of vault tokens.
    /// @dev    token -> spender -> isApproved
    mapping(address => mapping(address => bool)) private approvals;

    /**
     * @notice Returns true if the given spender is approved to spend the given token.
     *
     * @param token                The token approval to check.
     * @param spender              The token spender.
     *
     * @return isApproved          True if approved, else false.
     */
    function isApproved(address token, address spender) public view returns (bool) {
        return approvals[token][spender];
    }

    // ======================================== UPDATE OPERATIONS =======================================

    /**
     * @notice Sets approval status of a given token for a spender. Note that this is
     *         NOT a token approval - it is permission to create a token approval from
     *         the asset vault.
     *
     * @param token                The token approval to set.
     * @param spender              The token spender.
     * @param _isApproved          Whether the spender should be approved.
     */
    function setApproval(address token, address spender, bool _isApproved) external onlyRole(WHITELIST_MANAGER_ROLE) {
        approvals[token][spender] = _isApproved;
        emit ApprovalSet(msg.sender, token, spender, _isApproved);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IAccessControlEnumerable.sol";
import "./AccessControl.sol";
import "../utils/structs/EnumerableSet.sol";

/**
 * @dev Extension of {AccessControl} that allows enumerating the members of each role.
 */
abstract contract AccessControlEnumerable is IAccessControlEnumerable, AccessControl {
    using EnumerableSet for EnumerableSet.AddressSet;

    mapping(bytes32 => EnumerableSet.AddressSet) private _roleMembers;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControlEnumerable).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) public view override returns (address) {
        return _roleMembers[role].at(index);
    }

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) public view override returns (uint256) {
        return _roleMembers[role].length();
    }

    /**
     * @dev Overload {grantRole} to track enumerable memberships
     */
    function grantRole(bytes32 role, address account) public virtual override(AccessControl, IAccessControl) {
        super.grantRole(role, account);
        _roleMembers[role].add(account);
    }

    /**
     * @dev Overload {revokeRole} to track enumerable memberships
     */
    function revokeRole(bytes32 role, address account) public virtual override(AccessControl, IAccessControl) {
        super.revokeRole(role, account);
        _roleMembers[role].remove(account);
    }

    /**
     * @dev Overload {renounceRole} to track enumerable memberships
     */
    function renounceRole(bytes32 role, address account) public virtual override(AccessControl, IAccessControl) {
        super.renounceRole(role, account);
        _roleMembers[role].remove(account);
    }

    /**
     * @dev Overload {_setupRole} to track enumerable memberships
     */
    function _setupRole(bytes32 role, address account) internal virtual override {
        super._setupRole(role, account);
        _roleMembers[role].add(account);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.18;

interface ICallWhitelist {
    // ============= Events ==============

    event CallAdded(address operator, address callee, bytes4 selector);
    event CallRemoved(address operator, address callee, bytes4 selector);

    // ================ View Functions ================

    function isWhitelisted(address callee, bytes4 selector) external view returns (bool);

    // ================ Update Operations ================

    function add(address callee, bytes4 selector) external;

    function remove(address callee, bytes4 selector) external;
}

// SPDX-License-Identifier: GPL-3.0-only

pragma solidity 0.8.18;

import "@openzeppelin/contracts/token/ERC1155/IERC1155.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721.sol";

//solhint-disable max-line-length

/**
 * @title CallBlacklist
 * @author Non-Fungible Technologies, Inc.
 *
 * Library contract maintaining an immutable blacklist for any CallWhitelist contract
 * (or CallWhitelistApprovals). These functions can never be called through the vault's
 * `call` functionality. Note that CallWhitelistApprovals still allows approvals to take
 * place based on certain spenders set in `setApproval`.
 */
abstract contract CallBlacklist {
    // ============================================ STATE ==============================================

    // ============= Global Immutable State ==============

    /**
     * @dev Global blacklist for transfer functions.
     */
    bytes4 private constant ERC20_TRANSFER = IERC20.transfer.selector;
    bytes4 private constant ERC20_ERC721_APPROVE = IERC20.approve.selector;
    bytes4 private constant ERC20_ERC721_TRANSFER_FROM = IERC20.transferFrom.selector;
    bytes4 private constant ERC20_INCREASE_ALLOWANCE = bytes4(keccak256("increaseAllowance(address,uint256)"));
    bytes4 private constant ERC20_BURN = bytes4(keccak256("burn(address,uint256)"));
    bytes4 private constant ERC20_BURN_FROM = bytes4(keccak256("burnFrom(address,uint256)"));

    bytes4 private constant ERC721_SAFE_TRANSFER_FROM = bytes4(keccak256("safeTransferFrom(address,address,uint256)"));
    bytes4 private constant ERC721_SAFE_TRANSFER_FROM_DATA = bytes4(keccak256("safeTransferFrom(address,address,uint256,bytes)"));
    bytes4 private constant ERC721_ERC1155_SET_APPROVAL = IERC721.setApprovalForAll.selector;
    bytes4 private constant ERC721_BURN = bytes4(keccak256("burn(uint256)"));

    bytes4 private constant ERC1155_SAFE_TRANSFER_FROM = IERC1155.safeTransferFrom.selector;
    bytes4 private constant ERC1155_SAFE_BATCH_TRANSFER_FROM = IERC1155.safeBatchTransferFrom.selector;
    bytes4 private constant ERC1155_BURN = bytes4(keccak256("burn(address,uint256,uint256)"));
    bytes4 private constant ERC1155_BURN_BATCH = bytes4(keccak256("burn(address,uint256[],uint256[])"));

    bytes4 private constant PUNKS_TRANSFER = bytes4(keccak256("transferPunk(address,uint256)"));
    bytes4 private constant PUNKS_OFFER = bytes4(keccak256("offerPunkForSale(uint256,uint256)"));
    bytes4 private constant PUNKS_OFFER_TO_ADDRESS = bytes4(keccak256("offerPunkForSaleToAddress(uint256,uint256,address)"));
    bytes4 private constant PUNKS_BUY = bytes4(keccak256("buyPunk(uint256)"));

    bytes4 private constant SUPERRARE_SET_SALE_PRICE = bytes4(keccak256("setSalePrice(uint256,uint256)"));
    bytes4 private constant SUPERRARE_ACCEPT_BID = bytes4(keccak256("acceptBid(uint256)"));
    // SuperRare transfer already blacklisted - same elector as IERC20.transfer
    // SuperRare approve already blacklisted - same elector as IERC20.approve

    // ================= Blacklist State ==================

    /**
     * @notice Returns true if the given function selector is on the global blacklist.
     *         Blacklisted function selectors cannot be called on any contract.
     *
     * @param selector              The function selector to check.
     *
     * @return isBlacklisted        True if blacklisted, else false.
     */
    function isBlacklisted(bytes4 selector) public pure returns (bool) {
        return
            selector == ERC20_TRANSFER ||
            selector == ERC20_ERC721_APPROVE ||
            selector == ERC20_ERC721_TRANSFER_FROM ||
            selector == ERC20_INCREASE_ALLOWANCE ||
            selector == ERC20_BURN ||
            selector == ERC20_BURN_FROM ||
            selector == ERC721_SAFE_TRANSFER_FROM ||
            selector == ERC721_SAFE_TRANSFER_FROM_DATA ||
            selector == ERC721_ERC1155_SET_APPROVAL ||
            selector == ERC721_BURN ||
            selector == ERC1155_SAFE_TRANSFER_FROM ||
            selector == ERC1155_SAFE_BATCH_TRANSFER_FROM ||
            selector == ERC1155_BURN ||
            selector == ERC1155_BURN_BATCH ||
            selector == PUNKS_TRANSFER ||
            selector == PUNKS_OFFER ||
            selector == PUNKS_OFFER_TO_ADDRESS ||
            selector == PUNKS_BUY ||
            selector == SUPERRARE_SET_SALE_PRICE ||
            selector == SUPERRARE_ACCEPT_BID;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.18;

/**
 * @title VaultErrors
 * @author Non-Fungible Technologies, Inc.
 *
 * This file contains all custom errors for vault contracts used by the protocol.
 * All errors prefixed by the contract that throws them (e.g., "AV_" for Asset Vault).
 * Errors located in one place to make it possible to holistically look at all
 * asset vault failure cases.
 */

// ==================================== Asset Vault ======================================
/// @notice All errors prefixed with AV_, to separate from other contracts in the protocol.

/**
 * @notice Vault withdraws must be enabled.
 */
error AV_WithdrawsDisabled();

/**
 * @notice Vault withdraws enabled.
 */
error AV_WithdrawsEnabled();

/**
 * @notice Asset vault already initialized.
 *
 * @param ownershipToken                    Caller of initialize function in asset vault contract.
 */
error AV_AlreadyInitialized(address ownershipToken);

/**
 * @notice CanCallOn authorization returned false.
 *
 * @param caller                             Msg.sender of the function call.
 */
error AV_MissingAuthorization(address caller);

/**
 * @notice Call disallowed.
 *
 * @param to                                The contract address to call.
 * @param data                              The data to call the contract with.
 */
error AV_NonWhitelistedCall(address to, bytes4 data);

/**
 * @notice Approval disallowed.
 *
 * @param token                             The token to approve.
 * @param spender                           The spender to approve.
 */
error AV_NonWhitelistedApproval(address token, address spender);

/**
 * @notice Cannot withdraw more than 25 items from a vault at a time.
 *
 * @param arrayLength                  Total elements provided.
 */
error AV_TooManyItems(uint256 arrayLength);

/**
 * @notice The length of either the tokenIds or tokenTypes array does not match
 *         the length of the tokenAddress array.
 *
 * @param arrayType                    Array type that does not match tokenAddress array length.
 */
error AV_LengthMismatch(string arrayType);

/**
 * @notice Zero address passed in where not allowed.
 *
 * @param addressType                  The name of the parameter for which a zero address was provided.
 */
error AV_ZeroAddress(string addressType);

/**
 * @notice Delegation disallowed.
 *
 * @param token                             The token to delegate.
 */
error AV_NonWhitelistedDelegation(address token);

// ==================================== Ownable ERC721 ======================================
/// @notice All errors prefixed with OERC721_, to separate from other contracts in the protocol.

/**
 * @notice Function caller is not the owner.
 *
 * @param caller                             Msg.sender of the function call.
 */
error OERC721_CallerNotOwner(address caller);

// ==================================== Vault Factory ======================================
/// @notice All errors prefixed with VF_, to separate from other contracts in the protocol.

/**
 * @notice Zero address passed in where not allowed.
 *
 * @param addressType                  The name of the parameter for which a zero address was provided.
 */
error VF_ZeroAddress(string addressType);

/**
 * @notice Global index out of bounds.
 *
 * @param tokenId                            AW-V2 tokenId of the asset vault.
 */
error VF_TokenIdOutOfBounds(uint256 tokenId);

/**
 * @notice Cannot transfer with withdraw enabled.
 *
 * @param tokenId                            AW-V2 tokenId of the asset vault.
 */
error VF_NoTransferWithdrawEnabled(uint256 tokenId);

/**
 * @notice Not enough msg.value sent for the required mint fee.
 *
 * @param value                              The msg.value.
 * @param requiredMintFee                    The required mint fee.
 */
error VF_InsufficientMintFee(uint256 value, uint256 requiredMintFee);

/**
 * @notice Non-existant token id provided as argument.
 *
 * @param tokenId                       The ID of the token to lookup the URI for.
 */
error VF_DoesNotExist(uint256 tokenId);

// ================================== Call Whitelist ======================================
/// @notice All errors prefixed with CW_, to separate from other contracts in the protocol.

/**
 * @notice Cannot whitelist a call which has already been whitelisted.
 *
 * @param callee                             The contract to be added to CallWhitelist mapping.
 * @param selector                           The function selector to be added to CallWhitelist mapping.
 */
error CW_AlreadyWhitelisted(address callee, bytes4 selector);

/**
 * @notice Cannot remove a call from the CallWhitelist that has not yet been added.
 *
 * @param callee                             The contract to be removed from CallWhitelist mapping.
 * @param selector                           The function selector to be removed from CallWhitelist mapping.
 */
error CW_NotWhitelisted(address callee, bytes4 selector);

// ================================== Call Whitelist Delegation ======================================

/**
 * @notice Zero address passed in the constructor.
 */
error CWD_ZeroAddress();

/**
 * @notice The registry address provided is currently set as the registry.
 */
error CWD_RegistryAlreadySet();

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IAccessControl.sol";

/**
 * @dev External interface of AccessControlEnumerable declared to support ERC165 detection.
 */
interface IAccessControlEnumerable is IAccessControl {
    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) external view returns (address);

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) external view returns (uint256);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IAccessControl.sol";
import "../utils/Context.sol";
import "../utils/Strings.sol";
import "../utils/introspection/ERC165.sol";

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it.
 */
abstract contract AccessControl is Context, IAccessControl, ERC165 {
    struct RoleData {
        mapping(address => bool) members;
        bytes32 adminRole;
    }

    mapping(bytes32 => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with a standardized message including the required role.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     *
     * _Available since v4.1._
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role, _msgSender());
        _;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view override returns (bool) {
        return _roles[role].members[account];
    }

    /**
     * @dev Revert with a standard message if `account` is missing `role`.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     */
    function _checkRole(bytes32 role, address account) internal view {
        if (!hasRole(role, account)) {
            revert(
                string(
                    abi.encodePacked(
                        "AccessControl: account ",
                        Strings.toHexString(uint160(account), 20),
                        " is missing role ",
                        Strings.toHexString(uint256(role), 32)
                    )
                )
            );
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view override returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) public virtual override {
        require(account == _msgSender(), "AccessControl: can only renounce roles for self");

        _revokeRole(role, account);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        bytes32 previousAdminRole = getRoleAdmin(role);
        _roles[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }

    function _grantRole(bytes32 role, address account) private {
        if (!hasRole(role, account)) {
            _roles[role].members[account] = true;
            emit RoleGranted(role, account, _msgSender());
        }
    }

    function _revokeRole(bytes32 role, address account) private {
        if (hasRole(role, account)) {
            _roles[role].members[account] = false;
            emit RoleRevoked(role, account, _msgSender());
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastvalue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastvalue;
                // Update the index for the moved value
                set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        return _values(set._inner);
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControl {
    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     *
     * _Available since v3.1._
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {AccessControl-_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC1155 compliant contract, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1155[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155 is IERC165 {
    /**
     * @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
     */
    event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);

    /**
     * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
     * transfers.
     */
    event TransferBatch(
        address indexed operator,
        address indexed from,
        address indexed to,
        uint256[] ids,
        uint256[] values
    );

    /**
     * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
     * `approved`.
     */
    event ApprovalForAll(address indexed account, address indexed operator, bool approved);

    /**
     * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
     *
     * If an {URI} event was emitted for `id`, the standard
     * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
     * returned by {IERC1155MetadataURI-uri}.
     */
    event URI(string value, uint256 indexed id);

    /**
     * @dev Returns the amount of tokens of token type `id` owned by `account`.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) external view returns (uint256);

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
        external
        view
        returns (uint256[] memory);

    /**
     * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
     *
     * Emits an {ApprovalForAll} event.
     *
     * Requirements:
     *
     * - `operator` cannot be the caller.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address account, address operator) external view returns (bool);

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes calldata data
    ) external;

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] calldata ids,
        uint256[] calldata amounts,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: CC0-1.0

pragma solidity 0.8.18;

/**
 * @notice Sourced from:
 * https://docs.delegate.cash/delegatecash/technical-documentation/delegation-registry/idelegationregistry.sol
 */

/**
 * @title An immutable registry contract to be deployed as a standalone primitive
 * @dev See EIP-5639, new project launches can read previous cold wallet -> hot wallet delegations
 *      from here and integrate those permissions into their flow
 */
interface IDelegationRegistry {
    /// @notice Delegation type
    enum DelegationType {
        NONE,
        ALL,
        CONTRACT,
        TOKEN
    }

    /// @notice Info about a single delegation, used for onchain enumeration
    struct DelegationInfo {
        DelegationType type_;
        address vault;
        address delegate;
        address contract_;
        uint256 tokenId;
    }

    /// @notice Info about a single contract-level delegation
    struct ContractDelegation {
        address contract_;
        address delegate;
    }

    /// @notice Info about a single token-level delegation
    struct TokenDelegation {
        address contract_;
        uint256 tokenId;
        address delegate;
    }

    /// @notice Emitted when a user delegates their entire wallet
    event DelegateForAll(address vault, address delegate, bool value);

    /// @notice Emitted when a user delegates a specific contract
    event DelegateForContract(address vault, address delegate, address contract_, bool value);

    /// @notice Emitted when a user delegates a specific token
    event DelegateForToken(address vault, address delegate, address contract_, uint256 tokenId, bool value);

    /// @notice Emitted when a user revokes all delegations
    event RevokeAllDelegates(address vault);

    /// @notice Emitted when a user revoes all delegations for a given delegate
    event RevokeDelegate(address vault, address delegate);

    /**
     * -----------  WRITE -----------
     */

    /**
     * @notice Allow the delegate to act on your behalf for all contracts
     * @param delegate The hotwallet to act on your behalf
     * @param value Whether to enable or disable delegation for this address, true for setting and false for revoking
     */
    function delegateForAll(address delegate, bool value) external;

    /**
     * @notice Allow the delegate to act on your behalf for a specific contract
     * @param delegate The hotwallet to act on your behalf
     * @param contract_ The address for the contract you're delegating
     * @param value Whether to enable or disable delegation for this address, true for setting and false for revoking
     */
    function delegateForContract(address delegate, address contract_, bool value) external;

    /**
     * @notice Allow the delegate to act on your behalf for a specific token
     * @param delegate The hotwallet to act on your behalf
     * @param contract_ The address for the contract you're delegating
     * @param tokenId The token id for the token you're delegating
     * @param value Whether to enable or disable delegation for this address, true for setting and false for revoking
     */
    function delegateForToken(address delegate, address contract_, uint256 tokenId, bool value) external;

    /**
     * @notice Revoke all delegates
     */
    function revokeAllDelegates() external;

    /**
     * @notice Revoke a specific delegate for all their permissions
     * @param delegate The hotwallet to revoke
     */
    function revokeDelegate(address delegate) external;

    /**
     * @notice Remove yourself as a delegate for a specific vault
     * @param vault The vault which delegated to the msg.sender, and should be removed
     */
    function revokeSelf(address vault) external;

    /**
     * -----------  READ -----------
     */

    /**
     * @notice Returns all active delegations a given delegate is able to claim on behalf of
     * @param delegate The delegate that you would like to retrieve delegations for
     * @return info Array of DelegationInfo structs
     */
    function getDelegationsByDelegate(address delegate) external view returns (DelegationInfo[] memory);

    /**
     * @notice Returns an array of wallet-level delegates for a given vault
     * @param vault The cold wallet who issued the delegation
     * @return addresses Array of wallet-level delegates for a given vault
     */
    function getDelegatesForAll(address vault) external view returns (address[] memory);

    /**
     * @notice Returns an array of contract-level delegates for a given vault and contract
     * @param vault The cold wallet who issued the delegation
     * @param contract_ The address for the contract you're delegating
     * @return addresses Array of contract-level delegates for a given vault and contract
     */
    function getDelegatesForContract(address vault, address contract_) external view returns (address[] memory);

    /**
     * @notice Returns an array of contract-level delegates for a given vault's token
     * @param vault The cold wallet who issued the delegation
     * @param contract_ The address for the contract holding the token
     * @param tokenId The token id for the token you're delegating
     * @return addresses Array of contract-level delegates for a given vault's token
     */
    function getDelegatesForToken(address vault, address contract_, uint256 tokenId)
        external
        view
        returns (address[] memory);

    /**
     * @notice Returns all contract-level delegations for a given vault
     * @param vault The cold wallet who issued the delegations
     * @return delegations Array of ContractDelegation structs
     */
    function getContractLevelDelegations(address vault)
        external
        view
        returns (ContractDelegation[] memory delegations);

    /**
     * @notice Returns all token-level delegations for a given vault
     * @param vault The cold wallet who issued the delegations
     * @return delegations Array of TokenDelegation structs
     */
    function getTokenLevelDelegations(address vault) external view returns (TokenDelegation[] memory delegations);

    /**
     * @notice Returns true if the address is delegated to act on the entire vault
     * @param delegate The hotwallet to act on your behalf
     * @param vault The cold wallet who issued the delegation
     */
    function checkDelegateForAll(address delegate, address vault) external view returns (bool);

    /**
     * @notice Returns true if the address is delegated to act on your behalf for a token contract or an entire vault
     * @param delegate The hotwallet to act on your behalf
     * @param contract_ The address for the contract you're delegating
     * @param vault The cold wallet who issued the delegation
     */
    function checkDelegateForContract(address delegate, address vault, address contract_)
        external
        view
        returns (bool);

    /**
     * @notice Returns true if the address is delegated to act on your behalf for a specific token, the token's contract or an entire vault
     * @param delegate The hotwallet to act on your behalf
     * @param contract_ The address for the contract you're delegating
     * @param tokenId The token id for the token you're delegating
     * @param vault The cold wallet who issued the delegation
     */
    function checkDelegateForToken(address delegate, address vault, address contract_, uint256 tokenId)
        external
        view
        returns (bool);
}

{
  "metadata": {
    "bytecodeHash": "none"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_registry","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"CWD_RegistryAlreadySet","type":"error"},{"inputs":[],"name":"CWD_ZeroAddress","type":"error"},{"inputs":[{"internalType":"address","name":"callee","type":"address"},{"internalType":"bytes4","name":"selector","type":"bytes4"}],"name":"CW_AlreadyWhitelisted","type":"error"},{"inputs":[{"internalType":"address","name":"callee","type":"address"},{"internalType":"bytes4","name":"selector","type":"bytes4"}],"name":"CW_NotWhitelisted","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"caller","type":"address"},{"indexed":true,"internalType":"address","name":"token","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"bool","name":"isApproved","type":"bool"}],"name":"ApprovalSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"operator","type":"address"},{"indexed":false,"internalType":"address","name":"callee","type":"address"},{"indexed":false,"internalType":"bytes4","name":"selector","type":"bytes4"}],"name":"CallAdded","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"operator","type":"address"},{"indexed":false,"internalType":"address","name":"callee","type":"address"},{"indexed":false,"internalType":"bytes4","name":"selector","type":"bytes4"}],"name":"CallRemoved","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"caller","type":"address"},{"indexed":true,"internalType":"address","name":"token","type":"address"},{"indexed":false,"internalType":"bool","name":"isApproved","type":"bool"}],"name":"DelegationSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"caller","type":"address"},{"indexed":true,"internalType":"address","name":"registry","type":"address"}],"name":"RegistryChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"inputs":[],"name":"ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"WHITELIST_MANAGER_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"callee","type":"address"},{"internalType":"bytes4","name":"selector","type":"bytes4"}],"name":"add","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"uint256","name":"index","type":"uint256"}],"name":"getRoleMember","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleMemberCount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"isApproved","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes4","name":"selector","type":"bytes4"}],"name":"isBlacklisted","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"pure","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"isDelegationApproved","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"callee","type":"address"},{"internalType":"bytes4","name":"selector","type":"bytes4"}],"name":"isWhitelisted","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"registry","outputs":[{"internalType":"contract IDelegationRegistry","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"callee","type":"address"},{"internalType":"bytes4","name":"selector","type":"bytes4"}],"name":"remove","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"spender","type":"address"},{"internalType":"bool","name":"_isApproved","type":"bool"}],"name":"setApproval","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"bool","name":"_isApproved","type":"bool"}],"name":"setDelegationApproval","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_registry","type":"address"}],"name":"setRegistry","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"}]

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

0x608060405234801561001057600080fd5b50600436106101375760003560e01c80637fa02c4b116100b8578063a389783e1161007c578063a389783e146102ca578063a91ee0dc14610306578063b048ea0814610319578063ca15c8731461032c578063d11e273d1461033f578063d547741f1461035257600080fd5b80637fa02c4b1461025d5780639010d07c1461028957806391d148541461029c5780639dc26f0f146102af578063a217fddf146102c257600080fd5b806330ace3bd116100ff57806330ace3bd146101d057806336568abe146101e35780637295ed93146101f657806375b238fc1461020b5780637b1039991461023257600080fd5b806301ffc9a71461013c5780631c0554ba14610164578063248a9ca3146101775780632dba161f146101a85780632f2ff15d146101bd575b600080fd5b61014f61014a366004610fa7565b610365565b60405190151581526020015b60405180910390f35b61014f610172366004610fd9565b610390565b61019a61018536600461100c565b60009081526020819052604090206001015490565b60405190815260200161015b565b6101bb6101b6366004610fd9565b6103dc565b005b6101bb6101cb366004611025565b6104b9565b6101bb6101de366004610fd9565b6104e0565b6101bb6101f1366004611025565b6105a2565b61019a6000805160206112f583398151915281565b61019a7fdf8b4c520ffe197c5343c6f5aec59570151ef9a492f2c624fd45ddde6135ec4281565b600554610245906001600160a01b031681565b6040516001600160a01b03909116815260200161015b565b61014f61026b366004611048565b6001600160a01b031660009081526004602052604090205460ff1690565b610245610297366004611063565b6105c4565b61014f6102aa366004611025565b6105dc565b61014f6102bd366004610fa7565b610605565b61019a600081565b61014f6102d8366004611085565b6001600160a01b03918216600090815260036020908152604080832093909416825291909152205460ff1690565b6101bb610314366004611048565b610821565b6101bb6103273660046110bf565b6108c7565b61019a61033a36600461100c565b610950565b6101bb61034d366004611102565b610967565b6101bb610360366004611025565b6109e2565b60006001600160e01b03198216635a05180f60e01b148061038a575061038a82610a0f565b92915050565b600061039b82610605565b1580156103d557506001600160a01b03831660009081526002602090815260408083206001600160e01b03198616845290915290205460ff165b9392505050565b6000805160206112f58339815191526103f58133610a44565b6001600160a01b03831660009081526002602090815260408083206001600160e01b031986168452918290529091205460ff1615610453578383604051632c3d23a360e21b815260040161044a92919061112c565b60405180910390fd5b6001600160e01b0319831660009081526020829052604090819020805460ff19166001179055517f6c4717042af0f452c112b6fff33e4a552b9f764fa41370abf2ebf2f152e124ad906104ab9033908790879061114f565b60405180910390a150505050565b6104c38282610aa8565b60008281526001602052604090206104db90826109fa565b505050565b6000805160206112f58339815191526104f98133610a44565b6001600160a01b03831660009081526002602090815260408083206001600160e01b031986168452918290529091205460ff1661054d57838360405163201d8d1d60e11b815260040161044a92919061112c565b6001600160e01b0319831660009081526020829052604090819020805460ff19169055517f5b7da002bcc7b0f0f515c6024952de7abfc209b013640e6e560ecefdac248b05906104ab9033908790879061114f565b6105ac8282610ace565b60008281526001602052604090206104db9082610b48565b60008281526001602052604081206103d59083610b5d565b6000918252602082815260408084206001600160a01b0393909316845291905290205460ff1690565b60006001600160e01b0319821663a9059cbb60e01b148061063657506001600160e01b0319821663095ea7b360e01b145b8061065157506001600160e01b031982166323b872dd60e01b145b8061066c57506001600160e01b03198216633950935160e01b145b8061068757506001600160e01b03198216632770a7eb60e21b145b806106a257506001600160e01b0319821663079cc67960e41b145b806106bd57506001600160e01b03198216632142170760e11b145b806106d857506001600160e01b03198216635c46a7ef60e11b145b806106f357506001600160e01b0319821663a22cb46560e01b145b8061070e57506001600160e01b03198216630852cd8d60e31b145b8061072957506001600160e01b03198216637921219560e11b145b8061074457506001600160e01b03198216631759616b60e11b145b8061075f57506001600160e01b03198216637a94c56560e11b145b8061077a57506001600160e01b03198216633db0f8ab60e01b145b8061079557506001600160e01b031982166322dca8bb60e21b145b806107b057506001600160e01b0319821663c44193c360e01b145b806107cb57506001600160e01b0319821663bf31196f60e01b145b806107e657506001600160e01b0319821663104c9fd360e31b145b8061080157506001600160e01b0319821663053992c560e01b145b8061038a57506001600160e01b0319821663158feac560e11b1492915050565b7fdf8b4c520ffe197c5343c6f5aec59570151ef9a492f2c624fd45ddde6135ec4261084c8133610a44565b6005546001600160a01b0380841691160361087a57604051635689b38d60e11b815260040160405180910390fd5b600580546001600160a01b0319166001600160a01b03841690811790915560405133907f4803049971913703d2dd43c06110dc7fad451e4603e9f485cbeebdda11263ab090600090a35050565b6000805160206112f58339815191526108e08133610a44565b6001600160a01b03848116600081815260036020908152604080832094881680845294825291829020805460ff1916871515908117909155915191825233917f3f5c9b3800c094248f79e536ebd25e88f25f663810db2d20a708b46feb04f4e1910160405180910390a450505050565b600081815260016020526040812061038a90610b69565b6000805160206112f58339815191526109808133610a44565b6001600160a01b038316600081815260046020908152604091829020805460ff1916861515908117909155915191825233917fa73ddc7bf5594e0eecab3f8e43840a4bb0e47f3ecb859082d47bea306bb293d4910160405180910390a3505050565b6105ac8282610b73565b6109f68282610b99565b5050565b60006103d5836001600160a01b038416610c1d565b60006001600160e01b03198216637965db0b60e01b148061038a57506301ffc9a760e01b6001600160e01b031983161461038a565b610a4e82826105dc565b6109f657610a66816001600160a01b03166014610c6c565b610a71836020610c6c565b604051602001610a829291906111a0565b60408051601f198184030181529082905262461bcd60e51b825261044a91600401611215565b600082815260208190526040902060010154610ac48133610a44565b6104db8383610b99565b6001600160a01b0381163314610b3e5760405162461bcd60e51b815260206004820152602f60248201527f416363657373436f6e74726f6c3a2063616e206f6e6c792072656e6f756e636560448201526e103937b632b9903337b91039b2b63360891b606482015260840161044a565b6109f68282610e08565b60006103d5836001600160a01b038416610e6d565b60006103d58383610f60565b600061038a825490565b600082815260208190526040902060010154610b8f8133610a44565b6104db8383610e08565b610ba382826105dc565b6109f6576000828152602081815260408083206001600160a01b03851684529091529020805460ff19166001179055610bd93390565b6001600160a01b0316816001600160a01b0316837f2f8788117e7eff1d82e926ec794901d17c78024a50270940304540a733656f0d60405160405180910390a45050565b6000818152600183016020526040812054610c645750815460018181018455600084815260208082209093018490558454848252828601909352604090209190915561038a565b50600061038a565b60606000610c7b83600261125e565b610c86906002611275565b67ffffffffffffffff811115610c9e57610c9e611288565b6040519080825280601f01601f191660200182016040528015610cc8576020820181803683370190505b509050600360fc1b81600081518110610ce357610ce361129e565b60200101906001600160f81b031916908160001a905350600f60fb1b81600181518110610d1257610d1261129e565b60200101906001600160f81b031916908160001a9053506000610d3684600261125e565b610d41906001611275565b90505b6001811115610db9576f181899199a1a9b1b9c1cb0b131b232b360811b85600f1660108110610d7557610d7561129e565b1a60f81b828281518110610d8b57610d8b61129e565b60200101906001600160f81b031916908160001a90535060049490941c93610db2816112b4565b9050610d44565b5083156103d55760405162461bcd60e51b815260206004820181905260248201527f537472696e67733a20686578206c656e67746820696e73756666696369656e74604482015260640161044a565b610e1282826105dc565b156109f6576000828152602081815260408083206001600160a01b0385168085529252808320805460ff1916905551339285917ff6391f5c32d9c69d2a47ea670b442974b53935d1edc7fd64eb21e047a839171b9190a45050565b60008181526001830160205260408120548015610f56576000610e916001836112cb565b8554909150600090610ea5906001906112cb565b9050818114610f0a576000866000018281548110610ec557610ec561129e565b9060005260206000200154905080876000018481548110610ee857610ee861129e565b6000918252602080832090910192909255918252600188019052604090208390555b8554869080610f1b57610f1b6112de565b60019003818190600052602060002001600090559055856001016000868152602001908152602001600020600090556001935050505061038a565b600091505061038a565b6000826000018281548110610f7757610f7761129e565b9060005260206000200154905092915050565b80356001600160e01b031981168114610fa257600080fd5b919050565b600060208284031215610fb957600080fd5b6103d582610f8a565b80356001600160a01b0381168114610fa257600080fd5b60008060408385031215610fec57600080fd5b610ff583610fc2565b915061100360208401610f8a565b90509250929050565b60006020828403121561101e57600080fd5b5035919050565b6000806040838503121561103857600080fd5b8235915061100360208401610fc2565b60006020828403121561105a57600080fd5b6103d582610fc2565b6000806040838503121561107657600080fd5b50508035926020909101359150565b6000806040838503121561109857600080fd5b6110a183610fc2565b915061100360208401610fc2565b80358015158114610fa257600080fd5b6000806000606084860312156110d457600080fd5b6110dd84610fc2565b92506110eb60208501610fc2565b91506110f9604085016110af565b90509250925092565b6000806040838503121561111557600080fd5b61111e83610fc2565b9150611003602084016110af565b6001600160a01b039290921682526001600160e01b031916602082015260400190565b6001600160a01b0393841681529190921660208201526001600160e01b0319909116604082015260600190565b60005b8381101561119757818101518382015260200161117f565b50506000910152565b7f416363657373436f6e74726f6c3a206163636f756e74200000000000000000008152600083516111d881601785016020880161117c565b7001034b99036b4b9b9b4b733903937b6329607d1b601791840191820152835161120981602884016020880161117c565b01602801949350505050565b602081526000825180602084015261123481604085016020870161117c565b601f01601f19169190910160400192915050565b634e487b7160e01b600052601160045260246000fd5b808202811582820484141761038a5761038a611248565b8082018082111561038a5761038a611248565b634e487b7160e01b600052604160045260246000fd5b634e487b7160e01b600052603260045260246000fd5b6000816112c3576112c3611248565b506000190190565b8181038181111561038a5761038a611248565b634e487b7160e01b600052603160045260246000fdfe827de50cc5532fcea9338402dc65442c2567a37fbd0cd8eb56858d00e9e842bda164736f6c6343000812000a

00000000000000000000000000000000000076a84fef008cdabe6409d2fe638b

-----Decoded View---------------
Arg [0] : _registry (address): 0x00000000000076A84feF008CDAbe6409d2FE638B

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 00000000000000000000000000000000000076a84fef008cdabe6409d2fe638b