Contract

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.20;

import {MerkleDistributorWithDeadline} from "./MerkleDistributorWithDeadline.sol";

contract MerkleDistributorAdjustable is MerkleDistributorWithDeadline {
    error ZeroMerkleRoot();
    error StaleMerkleRoot();
    error UsedMerkleRoot();
    error TooEarly();

    // Wed Mar 13 2024 08:00:00 GMT+0000
    uint256 internal constant START = 1710316800;
    // Each epoch is 7 days
    uint256 internal constant EPOCH = 604800;

    bytes32 public proposedMerkleRoot;

    mapping(bytes32 => bool) public usedMerkleRoot;

    constructor(address token_, bytes32 merkleRoot_, uint256 endTime_, address beneficiary_)
        MerkleDistributorWithDeadline(token_, merkleRoot_, endTime_, beneficiary_)
    {
        proposedMerkleRoot = merkleRoot_;
    }

    function epoch() public view returns (uint256) {
        return (block.timestamp - START) / EPOCH;
    }

    function updateEndTime(uint256 endTime_) external onlyOwner {
        if (endTime_ < block.timestamp) revert TooEarly();
        endTime = endTime_;
    }

    // ASSUMPTIONS
    // 1. Every user has at most ONE associated leaf in the Merkle tree. 
    // 2. The leaf associated with an account tracks the TOTAL amount of tokens given to the user. 
    //    since the first epoch. This value monotonically increases with each epoch and each new Merkle tree
    //    proposed. User can only claim this amount - total claimed already
    function proposeMerkleRoot(bytes32 merkleRoot_) external onlyOwner {
        if (merkleRoot_ == bytes32(0)) revert ZeroMerkleRoot();
        if (usedMerkleRoot[merkleRoot_]) revert UsedMerkleRoot();
        proposedMerkleRoot = merkleRoot_;
    }

    function updateMerkleRoot() external onlyOwner {
        if (merkleRoot == proposedMerkleRoot) revert StaleMerkleRoot();
        merkleRoot = proposedMerkleRoot;
        usedMerkleRoot[merkleRoot] = true;
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.20;

import {MerkleDistributor} from "./MerkleDistributor.sol";
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import {IERC20, SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

error EndTimeInPast();
error ClaimWindowFinished();
error NoWithdrawDuringClaim();

contract MerkleDistributorWithDeadline is MerkleDistributor, Ownable {
    using SafeERC20 for IERC20;

    uint256 public endTime;

    constructor(address token_, bytes32 merkleRoot_, uint256 endTime_, address beneficiary_)
        MerkleDistributor(token_, merkleRoot_)
        Ownable(beneficiary_)
    {
        if (endTime_ <= block.timestamp) revert EndTimeInPast();
        endTime = endTime_;
    }

    function claim(uint256 index, address account, uint256 amount, bytes32[] calldata merkleProof) public override {
        if (block.timestamp > endTime) revert ClaimWindowFinished();
        super.claim(index, account, amount, merkleProof);
    }

    function withdraw() external onlyOwner {
        if (block.timestamp < endTime) revert NoWithdrawDuringClaim();
        IERC20(token).safeTransfer(msg.sender, IERC20(token).balanceOf(address(this)));
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.20;

import {IERC20, SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {MerkleProof} from "@openzeppelin/contracts/utils/cryptography/MerkleProof.sol";
import {IMerkleDistributor} from "./interfaces/IMerkleDistributor.sol";

contract MerkleDistributor is IMerkleDistributor {
    using SafeERC20 for IERC20;

    error AlreadyClaimed();
    error InvalidProof();

    address public immutable override token;
    bytes32 public override merkleRoot;

    mapping(address => uint256) public claimed;

    constructor(address token_, bytes32 merkleRoot_) {
        token = token_;
        merkleRoot = merkleRoot_;
    }

    function claim(uint256 index, address account, uint256 amount, bytes32[] calldata merkleProof)
        public
        virtual
        override
    {
        uint256 claimable = amount - claimed[account];

        if (claimable == 0) revert AlreadyClaimed();

        // Verify the merkle proof.
        bytes32 node = keccak256(abi.encodePacked(index, account, amount));
        if (!MerkleProof.verify(merkleProof, merkleRoot, node)) revert InvalidProof();

        claimed[account] += claimable;

        IERC20(token).safeTransfer(account, claimable);

        emit Claimed(index, account, amount);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {Context} from "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/MerkleProof.sol)

pragma solidity ^0.8.20;

/**
 * @dev These functions deal with verification of Merkle Tree proofs.
 *
 * The tree and the proofs can be generated using our
 * https://github.com/OpenZeppelin/merkle-tree[JavaScript library].
 * You will find a quickstart guide in the readme.
 *
 * WARNING: You should avoid using leaf values that are 64 bytes long prior to
 * hashing, or use a hash function other than keccak256 for hashing leaves.
 * This is because the concatenation of a sorted pair of internal nodes in
 * the Merkle tree could be reinterpreted as a leaf value.
 * OpenZeppelin's JavaScript library generates Merkle trees that are safe
 * against this attack out of the box.
 */
library MerkleProof {
    /**
     *@dev The multiproof provided is not valid.
     */
    error MerkleProofInvalidMultiproof();

    /**
     * @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
     * defined by `root`. For this, a `proof` must be provided, containing
     * sibling hashes on the branch from the leaf to the root of the tree. Each
     * pair of leaves and each pair of pre-images are assumed to be sorted.
     */
    function verify(bytes32[] memory proof, bytes32 root, bytes32 leaf) internal pure returns (bool) {
        return processProof(proof, leaf) == root;
    }

    /**
     * @dev Calldata version of {verify}
     */
    function verifyCalldata(bytes32[] calldata proof, bytes32 root, bytes32 leaf) internal pure returns (bool) {
        return processProofCalldata(proof, leaf) == root;
    }

    /**
     * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up
     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
     * hash matches the root of the tree. When processing the proof, the pairs
     * of leafs & pre-images are assumed to be sorted.
     */
    function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
        bytes32 computedHash = leaf;
        for (uint256 i = 0; i < proof.length; i++) {
            computedHash = _hashPair(computedHash, proof[i]);
        }
        return computedHash;
    }

    /**
     * @dev Calldata version of {processProof}
     */
    function processProofCalldata(bytes32[] calldata proof, bytes32 leaf) internal pure returns (bytes32) {
        bytes32 computedHash = leaf;
        for (uint256 i = 0; i < proof.length; i++) {
            computedHash = _hashPair(computedHash, proof[i]);
        }
        return computedHash;
    }

    /**
     * @dev Returns true if the `leaves` can be simultaneously proven to be a part of a Merkle tree defined by
     * `root`, according to `proof` and `proofFlags` as described in {processMultiProof}.
     *
     * CAUTION: Not all Merkle trees admit multiproofs. See {processMultiProof} for details.
     */
    function multiProofVerify(
        bytes32[] memory proof,
        bool[] memory proofFlags,
        bytes32 root,
        bytes32[] memory leaves
    ) internal pure returns (bool) {
        return processMultiProof(proof, proofFlags, leaves) == root;
    }

    /**
     * @dev Calldata version of {multiProofVerify}
     *
     * CAUTION: Not all Merkle trees admit multiproofs. See {processMultiProof} for details.
     */
    function multiProofVerifyCalldata(
        bytes32[] calldata proof,
        bool[] calldata proofFlags,
        bytes32 root,
        bytes32[] memory leaves
    ) internal pure returns (bool) {
        return processMultiProofCalldata(proof, proofFlags, leaves) == root;
    }

    /**
     * @dev Returns the root of a tree reconstructed from `leaves` and sibling nodes in `proof`. The reconstruction
     * proceeds by incrementally reconstructing all inner nodes by combining a leaf/inner node with either another
     * leaf/inner node or a proof sibling node, depending on whether each `proofFlags` item is true or false
     * respectively.
     *
     * CAUTION: Not all Merkle trees admit multiproofs. To use multiproofs, it is sufficient to ensure that: 1) the tree
     * is complete (but not necessarily perfect), 2) the leaves to be proven are in the opposite order they are in the
     * tree (i.e., as seen from right to left starting at the deepest layer and continuing at the next layer).
     */
    function processMultiProof(
        bytes32[] memory proof,
        bool[] memory proofFlags,
        bytes32[] memory leaves
    ) internal pure returns (bytes32 merkleRoot) {
        // This function rebuilds the root hash by traversing the tree up from the leaves. The root is rebuilt by
        // consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the
        // `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of
        // the Merkle tree.
        uint256 leavesLen = leaves.length;
        uint256 proofLen = proof.length;
        uint256 totalHashes = proofFlags.length;

        // Check proof validity.
        if (leavesLen + proofLen != totalHashes + 1) {
            revert MerkleProofInvalidMultiproof();
        }

        // The xxxPos values are "pointers" to the next value to consume in each array. All accesses are done using
        // `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's "pop".
        bytes32[] memory hashes = new bytes32[](totalHashes);
        uint256 leafPos = 0;
        uint256 hashPos = 0;
        uint256 proofPos = 0;
        // At each step, we compute the next hash using two values:
        // - a value from the "main queue". If not all leaves have been consumed, we get the next leaf, otherwise we
        //   get the next hash.
        // - depending on the flag, either another value from the "main queue" (merging branches) or an element from the
        //   `proof` array.
        for (uint256 i = 0; i < totalHashes; i++) {
            bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];
            bytes32 b = proofFlags[i]
                ? (leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++])
                : proof[proofPos++];
            hashes[i] = _hashPair(a, b);
        }

        if (totalHashes > 0) {
            if (proofPos != proofLen) {
                revert MerkleProofInvalidMultiproof();
            }
            unchecked {
                return hashes[totalHashes - 1];
            }
        } else if (leavesLen > 0) {
            return leaves[0];
        } else {
            return proof[0];
        }
    }

    /**
     * @dev Calldata version of {processMultiProof}.
     *
     * CAUTION: Not all Merkle trees admit multiproofs. See {processMultiProof} for details.
     */
    function processMultiProofCalldata(
        bytes32[] calldata proof,
        bool[] calldata proofFlags,
        bytes32[] memory leaves
    ) internal pure returns (bytes32 merkleRoot) {
        // This function rebuilds the root hash by traversing the tree up from the leaves. The root is rebuilt by
        // consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the
        // `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of
        // the Merkle tree.
        uint256 leavesLen = leaves.length;
        uint256 proofLen = proof.length;
        uint256 totalHashes = proofFlags.length;

        // Check proof validity.
        if (leavesLen + proofLen != totalHashes + 1) {
            revert MerkleProofInvalidMultiproof();
        }

        // The xxxPos values are "pointers" to the next value to consume in each array. All accesses are done using
        // `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's "pop".
        bytes32[] memory hashes = new bytes32[](totalHashes);
        uint256 leafPos = 0;
        uint256 hashPos = 0;
        uint256 proofPos = 0;
        // At each step, we compute the next hash using two values:
        // - a value from the "main queue". If not all leaves have been consumed, we get the next leaf, otherwise we
        //   get the next hash.
        // - depending on the flag, either another value from the "main queue" (merging branches) or an element from the
        //   `proof` array.
        for (uint256 i = 0; i < totalHashes; i++) {
            bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];
            bytes32 b = proofFlags[i]
                ? (leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++])
                : proof[proofPos++];
            hashes[i] = _hashPair(a, b);
        }

        if (totalHashes > 0) {
            if (proofPos != proofLen) {
                revert MerkleProofInvalidMultiproof();
            }
            unchecked {
                return hashes[totalHashes - 1];
            }
        } else if (leavesLen > 0) {
            return leaves[0];
        } else {
            return proof[0];
        }
    }

    /**
     * @dev Sorts the pair (a, b) and hashes the result.
     */
    function _hashPair(bytes32 a, bytes32 b) private pure returns (bytes32) {
        return a < b ? _efficientHash(a, b) : _efficientHash(b, a);
    }

    /**
     * @dev Implementation of keccak256(abi.encode(a, b)) that doesn't allocate or expand memory.
     */
    function _efficientHash(bytes32 a, bytes32 b) private pure returns (bytes32 value) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, a)
            mstore(0x20, b)
            value := keccak256(0x00, 0x40)
        }
    }
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.8.0;

// Allows anyone to claim a token if they exist in a merkle root.
interface IMerkleDistributor {
    // Returns the address of the token distributed by this contract.
    function token() external view returns (address);

    // Returns the merkle root of the merkle tree containing account balances available to claim.
    function merkleRoot() external view returns (bytes32);

    // Returns amount claimed by address
    function claimed(address account) external view returns (uint256);

    // Claim the given amount of the token to the given address. Reverts if the inputs are invalid.
    function claim(uint256 index, address account, uint256 amount, bytes32[] calldata merkleProof) external;

    // This event is triggered whenever a call to #claim succeeds.
    event Claimed(uint256 index, address account, uint256 amount);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

{
  "remappings": [
    "@openzeppelin/contracts/=lib/openzeppelin-contracts/contracts/",
    "ds-test/=lib/forge-std/lib/ds-test/src/",
    "erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
    "forge-std/=lib/forge-std/src/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/",
    "solmate/=lib/solmate/src/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "paris",
  "viaIR": false,
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"token_","type":"address"},{"internalType":"bytes32","name":"merkleRoot_","type":"bytes32"},{"internalType":"uint256","name":"endTime_","type":"uint256"},{"internalType":"address","name":"beneficiary_","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"AddressEmptyCode","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"AddressInsufficientBalance","type":"error"},{"inputs":[],"name":"AlreadyClaimed","type":"error"},{"inputs":[],"name":"ClaimWindowFinished","type":"error"},{"inputs":[],"name":"EndTimeInPast","type":"error"},{"inputs":[],"name":"FailedInnerCall","type":"error"},{"inputs":[],"name":"InvalidProof","type":"error"},{"inputs":[],"name":"NoWithdrawDuringClaim","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"OwnableInvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"OwnableUnauthorizedAccount","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"SafeERC20FailedOperation","type":"error"},{"inputs":[],"name":"StaleMerkleRoot","type":"error"},{"inputs":[],"name":"TooEarly","type":"error"},{"inputs":[],"name":"UsedMerkleRoot","type":"error"},{"inputs":[],"name":"ZeroMerkleRoot","type":"error"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"index","type":"uint256"},{"indexed":false,"internalType":"address","name":"account","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Claimed","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"inputs":[{"internalType":"uint256","name":"index","type":"uint256"},{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"bytes32[]","name":"merkleProof","type":"bytes32[]"}],"name":"claim","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"claimed","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"endTime","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"epoch","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"merkleRoot","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"merkleRoot_","type":"bytes32"}],"name":"proposeMerkleRoot","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"proposedMerkleRoot","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"token","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"endTime_","type":"uint256"}],"name":"updateEndTime","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"updateMerkleRoot","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"name":"usedMerkleRoot","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

0000000000000000000000000a6e7ba5042b38349e437ec6db6214aec7b356769ad2ef8a59dbcffb731f50895ce620312a971d5e6e85492b135f143e0655cb580000000000000000000000000000000000000000000000000000000068244d80000000000000000000000000aadc76c6e4abeeb52d764443357f6e75db28f0e1

-----Decoded View---------------
Arg [0] : token_ (address): 0x0a6E7Ba5042B38349e437ec6Db6214AEC7B35676
Arg [1] : merkleRoot_ (bytes32): 0x9ad2ef8a59dbcffb731f50895ce620312a971d5e6e85492b135f143e0655cb58
Arg [2] : endTime_ (uint256): 1747209600
Arg [3] : beneficiary_ (address): 0xAADC76C6E4AbeEb52D764443357F6e75db28f0e1

-----Encoded View---------------
4 Constructor Arguments found :
Arg [0] : 0000000000000000000000000a6e7ba5042b38349e437ec6db6214aec7b35676
Arg [1] : 9ad2ef8a59dbcffb731f50895ce620312a971d5e6e85492b135f143e0655cb58
Arg [2] : 0000000000000000000000000000000000000000000000000000000068244d80
Arg [3] : 000000000000000000000000aadc76c6e4abeeb52d764443357f6e75db28f0e1