Contract

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.6;

import {IJBToken as IJBTokenV2} from '@jbx-protocol-v2/contracts/interfaces/IJBToken.sol';
import {IJBToken as IJBTokenV3} from '@jbx-protocol-v3/contracts/interfaces/IJBToken.sol';
import {IJBController} from '@jbx-protocol-v2/contracts/interfaces/IJBController.sol';
import {IJBTokenStore} from '@jbx-protocol-v2/contracts/interfaces/IJBTokenStore.sol';
import {ITicketBooth, ITickets} from '@jbx-protocol-v1/contracts/interfaces/ITicketBooth.sol';
import '@openzeppelin/contracts/token/ERC20/extensions/ERC20Permit.sol';
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import '@openzeppelin/contracts/access/Ownable.sol';

/** 
  @notice
  An ERC-20 token that can be used by a project in the `JBTokenStore` & also this takes care of the migration of the V1 & V2 project tokens for V3.

  @dev
  Adheres to -
  IJBTokenV3: Allows this contract to be used by projects in the JBTokenStore.

  @dev
  Inherits from -
  ERC20Permit: General ERC20 token standard for allowing approvals to be made via signatures,. 
  Ownable: Includes convenience functionality for checking a message sender's permissions before executing certain transactions.
*/
contract JBV3Token is ERC20Permit, Ownable, ReentrancyGuard, IJBTokenV3 {
  //*********************************************************************//
  // --------------------------- custom errors ------------------------- //
  //*********************************************************************//
  error BAD_PROJECT();

  //*********************************************************************//
  // --------------------- public stored properties -------------------- //
  //*********************************************************************//

  /** 
    @notice
    The ID of the project that this token should be exclusively used for.  
  */
  uint256 public immutable override projectId;

  /** 
    @notice
    The V1 Token Booth instance. 
  */
  ITicketBooth public immutable v1TicketBooth;

  /** 
    @notice
    The V2 Token Store instance. 
  */
  IJBTokenStore public immutable v2TokenStore;

  /** 
    @notice
    Storing the v1 project ID to migrate to the v3 project ID. 
  */
  uint256 public immutable v1ProjectId;

  //*********************************************************************//
  // ------------------------- external views -------------------------- //
  //*********************************************************************//

  /** 
    @notice
    The total supply of this ERC20.

    @dev
    Includes the V3 token balance as well as unmigrated V1 and V2 balances.

    @param _projectId the ID of the project to which the token belongs. This is ignored.

    @return The total supply of this ERC20, as a fixed point number.
  */
  function totalSupply(uint256 _projectId) external view override returns (uint256) {
    _projectId; // Prevents unused var compiler and natspec complaints.

    return totalSupply();
  }

  /** 
    @notice
    The total supply of this ERC20.

    @dev
    Includes the V3 token balance as well as unmigrated V1 and V2 balances.

    @return The total supply of this ERC20, as a fixed point number.
  */
  function totalSupply() public view override returns (uint256) {
    uint256 _nonMigratedSupply;

    // If a V1 token is set get the remaining non-migrated supply.
    if(v1ProjectId != 0 && address(v1TicketBooth) != address(0)) {
      _nonMigratedSupply = v1TicketBooth.totalSupplyOf(v1ProjectId)
        - v1TicketBooth.balanceOf(address(this), v1ProjectId);
    }

    if (address(v2TokenStore) != address(0)) {
      _nonMigratedSupply += v2TokenStore.totalSupplyOf(projectId) -
        v2TokenStore.balanceOf(address(this), projectId);
    }

    return
      super.totalSupply() +
      _nonMigratedSupply;
  }

  /** 
    @notice
    An account's balance of this ERC20.

    @param _account The account to get a balance of.
    @param _projectId is the ID of the project to which the token belongs. This is ignored.

    @return The balance of the `_account` of this ERC20, as a fixed point number with 18 decimals.
  */
  function balanceOf(address _account, uint256 _projectId)
    external
    view
    override
    returns (uint256)
  {
    _projectId; // Prevents unused var compiler and natspec complaints.

    return super.balanceOf(_account);
  }

  //*********************************************************************//
  // -------------------------- public views --------------------------- //
  //*********************************************************************//

  /** 
    @notice
    The number of decimals included in the fixed point accounting of this token.

    @return The number of decimals.
  */
  function decimals() public view override(ERC20, IJBTokenV3) returns (uint8) {
    return super.decimals();
  }

  //*********************************************************************//
  // -------------------------- constructor ---------------------------- //
  //*********************************************************************//

  /** 
    @param _name The name of the token.
    @param _symbol The symbol that the token should be represented by.
    @param _projectId The V3 ID of the project that this token should exclusively be used for.
    @param _v1TicketBooth V1 Token Booth instance, if V1 migration is desired.
    @param _v2TokenStore V2 Token Store instance, if V2 migration is desired.
    @param _v1ProjectId V1 project ID that this token should include.
  */
  constructor(
    string memory _name,
    string memory _symbol,
    uint256 _projectId,
    ITicketBooth _v1TicketBooth,
    IJBTokenStore _v2TokenStore,
    uint256 _v1ProjectId
  ) ERC20(_name, _symbol) ERC20Permit(_name) {
    projectId = _projectId;
    v1TicketBooth = _v1TicketBooth;
    v2TokenStore = _v2TokenStore;
    v1ProjectId = _v1ProjectId;
  }

  //*********************************************************************//
  // ---------------------- external transactions ---------------------- //
  //*********************************************************************//

  /** 
    @notice
    Mints more of the token.

    @dev
    Only the owner of this contract can mint more of it.

    @param _projectId The ID of the project to which the token belongs.
    @param _account The account to mint the tokens for.
    @param _amount The amount of tokens to mint, as a fixed point number with 18 decimals.
  */
  function mint(
    uint256 _projectId,
    address _account,
    uint256 _amount
  ) external override onlyOwner {
    // Can't mint for a wrong project.
    if (_projectId != projectId) revert BAD_PROJECT();
    return _mint(_account, _amount);
  }

  /** 
    @notice
    Burn some outstanding tokens.

    @dev
    Only the owner of this contract cant burn some of its supply.

    @param _projectId The ID of the project to which the token belongs. This is ignored.
    @param _account The account to burn tokens from.
    @param _amount The amount of tokens to burn, as a fixed point number with 18 decimals.
  */
  function burn(
    uint256 _projectId,
    address _account,
    uint256 _amount
  ) external override onlyOwner {
    // Can't burn for a wrong project.
    if (_projectId != projectId) revert BAD_PROJECT();
    return _burn(_account, _amount);
  }

  /** 
    @notice
    Approves an account to spend tokens on the `msg.sender`s behalf.

    @param _projectId the ID of the project to which the token belongs. This is ignored.
    @param _spender The address that will be spending tokens on the `msg.sender`s behalf.
    @param _amount The amount the `_spender` is allowed to spend.
  */
  function approve(
    uint256 _projectId,
    address _spender,
    uint256 _amount
  ) external override {
    // Can't approve for a wrong project.
    if (_projectId != projectId) revert BAD_PROJECT();
    approve(_spender, _amount);
  }

  /** 
    @notice
    Transfer tokens to an account.
    
    @param _projectId The ID of the project to which the token belongs. This is ignored.
    @param _to The destination address.
    @param _amount The amount of the transfer, as a fixed point number with 18 decimals.
  */
  function transfer(
    uint256 _projectId,
    address _to,
    uint256 _amount
  ) external override {
    // Can't transfer for a wrong project.
    if (_projectId != projectId) revert BAD_PROJECT();
    transfer(_to, _amount);
  }

  /** 
    @notice
    Transfer tokens between accounts.

    @param _projectId The ID of the project to which the token belongs. This is ignored.
    @param _from The originating address.
    @param _to The destination address.
    @param _amount The amount of the transfer, as a fixed point number with 18 decimals.
  */
  function transferFrom(
    uint256 _projectId,
    address _from,
    address _to,
    uint256 _amount
  ) external override {
    // Can't transfer for a wrong project.
    if (_projectId != projectId) revert BAD_PROJECT();
    transferFrom(_from, _to, _amount);
  }

  /** 
    @notice
    Migrate v1 & v2 tokens to v3.
  */
  function migrate() external nonReentrant {
    uint256 _tokensToMint;

    unchecked {
      // Add the number of V1 tokens to migrate.
      _tokensToMint += _migrateV1Tokens();

      // Add the number of V2 tokens to migrate.
      _tokensToMint += _migrateV2Tokens();
    }

    // Mint tokens as needed.
    _mint(msg.sender, _tokensToMint);
  }

  /** 
    @notice
    Migrate V1 tokens to V3.

    @return v3TokensToMint The amount of V1 tokens to be migrated.
  */
  function _migrateV1Tokens() internal returns (uint256 v3TokensToMint) {
    // No V1 tokens to migrate if a V1 project ID isn't stored or a Ticket Booth isn't stored.
    if (v1ProjectId == 0 || address(v1TicketBooth) == address(0)) return 0;

    // Keep a local reference to the the project's V1 token instance.
    ITickets _v1Token = v1TicketBooth.ticketsOf(v1ProjectId);

    // Get a reference to the migrating account's unclaimed balance.
    uint256 _tokensToMintFromUnclaimedBalance = v1TicketBooth.stakedBalanceOf(
      msg.sender,
      v1ProjectId
    );
    // don't include the locked tokens
    _tokensToMintFromUnclaimedBalance -= v1TicketBooth.lockedBalanceOf(msg.sender, v1ProjectId);

    // Get a reference to the migrating account's ERC20 balance.
    uint256 _tokensToMintFromERC20s = _v1Token == ITickets(address(0))
      ? 0
      : _v1Token.balanceOf(msg.sender);

    // Calculate the amount of V3 tokens to mint from the total tokens being migrated.
    unchecked {
      v3TokensToMint = _tokensToMintFromERC20s + _tokensToMintFromUnclaimedBalance;
    }

    // Return if there's nothing to mint.
    if (v3TokensToMint == 0) return 0;

    // Transfer V1 ERC20 tokens to this contract from the msg sender if needed.
    if (_tokensToMintFromERC20s != 0)
      IERC20(_v1Token).transferFrom(msg.sender, address(this), _tokensToMintFromERC20s);

    // Transfer V1 unclaimed tokens to this contract from the msg sender if needed.
    if (_tokensToMintFromUnclaimedBalance != 0)
      v1TicketBooth.transfer(
        msg.sender,
        v1ProjectId,
        _tokensToMintFromUnclaimedBalance,
        address(this)
      );
  }

  /** 
    @notice
    Migrate V2 tokens to V3.

    @return v3TokensToMint The amount of V2 tokens to be migrated.
  */
  function _migrateV2Tokens() internal returns (uint256 v3TokensToMint) {
    // No V2 tokens to migrate if a token store does not exist.
    if (address(v2TokenStore) == address(0)) return 0;

    // Keep a reference to the the project's V2 token instance.
    IJBTokenV2 _v2Token = v2TokenStore.tokenOf(projectId);

    // Get a reference to the migrating account's unclaimed balance.
    uint256 _tokensToMintFromUnclaimedBalance = v2TokenStore.unclaimedBalanceOf(
      msg.sender,
      projectId
    );

    // Get a reference to the migrating account's ERC20 balance.
    uint256 _tokensToMintFromERC20s = _v2Token == IJBTokenV2(address(0))
      ? 0
      : _v2Token.balanceOf(msg.sender, projectId);

    // Calculate the amount of V3 tokens to mint from the total tokens being migrated.
    unchecked {
      v3TokensToMint = _tokensToMintFromERC20s + _tokensToMintFromUnclaimedBalance;
    }

    // Return if there's nothing to mint.
    if (v3TokensToMint == 0) return 0;

    // Transfer V2 ERC20 tokens to this contract from the msg sender if needed.
    if (_tokensToMintFromERC20s != 0)
      _v2Token.transferFrom(projectId, msg.sender, address(this), _tokensToMintFromERC20s);

    // Transfer V2 unclaimed tokens to this contract from the msg sender if needed.
    if (_tokensToMintFromUnclaimedBalance != 0)
      v2TokenStore.transferFrom(
        msg.sender,
        projectId,
        address(this),
        _tokensToMintFromUnclaimedBalance
      );
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import "./ITerminalDirectory.sol";
import "./ITerminal.sol";

interface IDirectPaymentAddress {
    event Forward(
        address indexed payer,
        uint256 indexed projectId,
        address beneficiary,
        uint256 value,
        string memo,
        bool preferUnstakedTickets
    );

    function terminalDirectory() external returns (ITerminalDirectory);

    function projectId() external returns (uint256);

    function memo() external returns (string memory);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IOperatorStore {
    event SetOperator(
        address indexed operator,
        address indexed account,
        uint256 indexed domain,
        uint256[] permissionIndexes,
        uint256 packed
    );

    function permissionsOf(
        address _operator,
        address _account,
        uint256 _domain
    ) external view returns (uint256);

    function hasPermission(
        address _operator,
        address _account,
        uint256 _domain,
        uint256 _permissionIndex
    ) external view returns (bool);

    function hasPermissions(
        address _operator,
        address _account,
        uint256 _domain,
        uint256[] calldata _permissionIndexes
    ) external view returns (bool);

    function setOperator(
        address _operator,
        uint256 _domain,
        uint256[] calldata _permissionIndexes
    ) external;

    function setOperators(
        address[] calldata _operators,
        uint256[] calldata _domains,
        uint256[][] calldata _permissionIndexes
    ) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import "@openzeppelin/contracts/token/ERC721/IERC721.sol";

import "./ITerminal.sol";
import "./IOperatorStore.sol";

interface IProjects is IERC721 {
    event Create(
        uint256 indexed projectId,
        address indexed owner,
        bytes32 indexed handle,
        string uri,
        ITerminal terminal,
        address caller
    );

    event SetHandle(
        uint256 indexed projectId,
        bytes32 indexed handle,
        address caller
    );

    event SetUri(uint256 indexed projectId, string uri, address caller);

    event TransferHandle(
        uint256 indexed projectId,
        address indexed to,
        bytes32 indexed handle,
        bytes32 newHandle,
        address caller
    );

    event ClaimHandle(
        address indexed account,
        uint256 indexed projectId,
        bytes32 indexed handle,
        address caller
    );

    event ChallengeHandle(
        bytes32 indexed handle,
        uint256 challengeExpiry,
        address caller
    );

    event RenewHandle(
        bytes32 indexed handle,
        uint256 indexed projectId,
        address caller
    );

    function count() external view returns (uint256);

    function uriOf(uint256 _projectId) external view returns (string memory);

    function handleOf(uint256 _projectId) external returns (bytes32 handle);

    function projectFor(bytes32 _handle) external returns (uint256 projectId);

    function transferAddressFor(bytes32 _handle)
        external
        returns (address receiver);

    function challengeExpiryOf(bytes32 _handle) external returns (uint256);

    function exists(uint256 _projectId) external view returns (bool);

    function create(
        address _owner,
        bytes32 _handle,
        string calldata _uri,
        ITerminal _terminal
    ) external returns (uint256 id);

    function setHandle(uint256 _projectId, bytes32 _handle) external;

    function setUri(uint256 _projectId, string calldata _uri) external;

    function transferHandle(
        uint256 _projectId,
        address _to,
        bytes32 _newHandle
    ) external returns (bytes32 _handle);

    function claimHandle(
        bytes32 _handle,
        address _for,
        uint256 _projectId
    ) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import './ITerminalDirectory.sol';

interface ITerminal {
  function terminalDirectory() external view returns (ITerminalDirectory);

  function migrationIsAllowed(ITerminal _terminal) external view returns (bool);

  function pay(
    uint256 _projectId,
    address _beneficiary,
    string calldata _memo,
    bool _preferUnstakedTickets
  ) external payable returns (uint256 fundingCycleId);

  function addToBalance(uint256 _projectId) external payable;

  function allowMigration(ITerminal _contract) external;

  function migrate(uint256 _projectId, ITerminal _to) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import "./IDirectPaymentAddress.sol";
import "./ITerminal.sol";
import "./IProjects.sol";
import "./IProjects.sol";

interface ITerminalDirectory {
    event DeployAddress(
        uint256 indexed projectId,
        string memo,
        address indexed caller
    );

    event SetTerminal(
        uint256 indexed projectId,
        ITerminal indexed terminal,
        address caller
    );

    event SetPayerPreferences(
        address indexed account,
        address beneficiary,
        bool preferUnstakedTickets
    );

    function projects() external view returns (IProjects);

    function terminalOf(uint256 _projectId) external view returns (ITerminal);

    function beneficiaryOf(address _account) external returns (address);

    function unstakedTicketsPreferenceOf(address _account)
        external
        returns (bool);

    function addressesOf(uint256 _projectId)
        external
        view
        returns (IDirectPaymentAddress[] memory);

    function deployAddress(uint256 _projectId, string calldata _memo) external;

    function setTerminal(uint256 _projectId, ITerminal _terminal) external;

    function setPayerPreferences(
        address _beneficiary,
        bool _preferUnstakedTickets
    ) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import "./IProjects.sol";
import "./IOperatorStore.sol";
import "./ITickets.sol";

interface ITicketBooth {
    event Issue(
        uint256 indexed projectId,
        string name,
        string symbol,
        address caller
    );
    event Print(
        address indexed holder,
        uint256 indexed projectId,
        uint256 amount,
        bool convertedTickets,
        bool preferUnstakedTickets,
        address controller
    );

    event Redeem(
        address indexed holder,
        uint256 indexed projectId,
        uint256 amount,
        uint256 stakedTickets,
        bool preferUnstaked,
        address controller
    );

    event Stake(
        address indexed holder,
        uint256 indexed projectId,
        uint256 amount,
        address caller
    );

    event Unstake(
        address indexed holder,
        uint256 indexed projectId,
        uint256 amount,
        address caller
    );

    event Lock(
        address indexed holder,
        uint256 indexed projectId,
        uint256 amount,
        address caller
    );

    event Unlock(
        address indexed holder,
        uint256 indexed projectId,
        uint256 amount,
        address caller
    );

    event Transfer(
        address indexed holder,
        uint256 indexed projectId,
        address indexed recipient,
        uint256 amount,
        address caller
    );

    function ticketsOf(uint256 _projectId) external view returns (ITickets);

    function projects() external view returns (IProjects);

    function lockedBalanceOf(address _holder, uint256 _projectId)
        external
        view
        returns (uint256);

    function lockedBalanceBy(
        address _operator,
        address _holder,
        uint256 _projectId
    ) external view returns (uint256);

    function stakedBalanceOf(address _holder, uint256 _projectId)
        external
        view
        returns (uint256);

    function stakedTotalSupplyOf(uint256 _projectId)
        external
        view
        returns (uint256);

    function totalSupplyOf(uint256 _projectId) external view returns (uint256);

    function balanceOf(address _holder, uint256 _projectId)
        external
        view
        returns (uint256 _result);

    function issue(
        uint256 _projectId,
        string calldata _name,
        string calldata _symbol
    ) external;

    function print(
        address _holder,
        uint256 _projectId,
        uint256 _amount,
        bool _preferUnstakedTickets
    ) external;

    function redeem(
        address _holder,
        uint256 _projectId,
        uint256 _amount,
        bool _preferUnstaked
    ) external;

    function stake(
        address _holder,
        uint256 _projectId,
        uint256 _amount
    ) external;

    function unstake(
        address _holder,
        uint256 _projectId,
        uint256 _amount
    ) external;

    function lock(
        address _holder,
        uint256 _projectId,
        uint256 _amount
    ) external;

    function unlock(
        address _holder,
        uint256 _projectId,
        uint256 _amount
    ) external;

    function transfer(
        address _holder,
        uint256 _projectId,
        uint256 _amount,
        address _recipient
    ) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";

interface ITickets is IERC20 {
    function print(address _account, uint256 _amount) external;

    function redeem(address _account, uint256 _amount) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

enum JBBallotState {
  Active,
  Approved,
  Failed
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import '@openzeppelin/contracts/utils/introspection/IERC165.sol';
import './../structs/JBFundAccessConstraints.sol';
import './../structs/JBFundingCycleData.sol';
import './../structs/JBFundingCycleMetadata.sol';
import './../structs/JBGroupedSplits.sol';
import './../structs/JBProjectMetadata.sol';
import './IJBDirectory.sol';
import './IJBFundingCycleStore.sol';
import './IJBMigratable.sol';
import './IJBPaymentTerminal.sol';
import './IJBSplitsStore.sol';
import './IJBToken.sol';
import './IJBTokenStore.sol';

interface IJBController is IERC165 {
  event LaunchProject(uint256 configuration, uint256 projectId, string memo, address caller);

  event LaunchFundingCycles(uint256 configuration, uint256 projectId, string memo, address caller);

  event ReconfigureFundingCycles(
    uint256 configuration,
    uint256 projectId,
    string memo,
    address caller
  );

  event SetFundAccessConstraints(
    uint256 indexed fundingCycleConfiguration,
    uint256 indexed fundingCycleNumber,
    uint256 indexed projectId,
    JBFundAccessConstraints constraints,
    address caller
  );

  event DistributeReservedTokens(
    uint256 indexed fundingCycleConfiguration,
    uint256 indexed fundingCycleNumber,
    uint256 indexed projectId,
    address beneficiary,
    uint256 tokenCount,
    uint256 beneficiaryTokenCount,
    string memo,
    address caller
  );

  event DistributeToReservedTokenSplit(
    uint256 indexed projectId,
    uint256 indexed domain,
    uint256 indexed group,
    JBSplit split,
    uint256 tokenCount,
    address caller
  );

  event MintTokens(
    address indexed beneficiary,
    uint256 indexed projectId,
    uint256 tokenCount,
    uint256 beneficiaryTokenCount,
    string memo,
    uint256 reservedRate,
    address caller
  );

  event BurnTokens(
    address indexed holder,
    uint256 indexed projectId,
    uint256 tokenCount,
    string memo,
    address caller
  );

  event Migrate(uint256 indexed projectId, IJBMigratable to, address caller);

  event PrepMigration(uint256 indexed projectId, address from, address caller);

  function projects() external view returns (IJBProjects);

  function fundingCycleStore() external view returns (IJBFundingCycleStore);

  function tokenStore() external view returns (IJBTokenStore);

  function splitsStore() external view returns (IJBSplitsStore);

  function directory() external view returns (IJBDirectory);

  function reservedTokenBalanceOf(uint256 _projectId, uint256 _reservedRate)
    external
    view
    returns (uint256);

  function distributionLimitOf(
    uint256 _projectId,
    uint256 _configuration,
    IJBPaymentTerminal _terminal,
    address _token
  ) external view returns (uint256 distributionLimit, uint256 distributionLimitCurrency);

  function overflowAllowanceOf(
    uint256 _projectId,
    uint256 _configuration,
    IJBPaymentTerminal _terminal,
    address _token
  ) external view returns (uint256 overflowAllowance, uint256 overflowAllowanceCurrency);

  function totalOutstandingTokensOf(uint256 _projectId, uint256 _reservedRate)
    external
    view
    returns (uint256);

  function getFundingCycleOf(uint256 _projectId, uint256 _configuration)
    external
    view
    returns (JBFundingCycle memory fundingCycle, JBFundingCycleMetadata memory metadata);

  function latestConfiguredFundingCycleOf(uint256 _projectId)
    external
    view
    returns (
      JBFundingCycle memory,
      JBFundingCycleMetadata memory metadata,
      JBBallotState
    );

  function currentFundingCycleOf(uint256 _projectId)
    external
    view
    returns (JBFundingCycle memory fundingCycle, JBFundingCycleMetadata memory metadata);

  function queuedFundingCycleOf(uint256 _projectId)
    external
    view
    returns (JBFundingCycle memory fundingCycle, JBFundingCycleMetadata memory metadata);

  function launchProjectFor(
    address _owner,
    JBProjectMetadata calldata _projectMetadata,
    JBFundingCycleData calldata _data,
    JBFundingCycleMetadata calldata _metadata,
    uint256 _mustStartAtOrAfter,
    JBGroupedSplits[] memory _groupedSplits,
    JBFundAccessConstraints[] memory _fundAccessConstraints,
    IJBPaymentTerminal[] memory _terminals,
    string calldata _memo
  ) external returns (uint256 projectId);

  function launchFundingCyclesFor(
    uint256 _projectId,
    JBFundingCycleData calldata _data,
    JBFundingCycleMetadata calldata _metadata,
    uint256 _mustStartAtOrAfter,
    JBGroupedSplits[] memory _groupedSplits,
    JBFundAccessConstraints[] memory _fundAccessConstraints,
    IJBPaymentTerminal[] memory _terminals,
    string calldata _memo
  ) external returns (uint256 configuration);

  function reconfigureFundingCyclesOf(
    uint256 _projectId,
    JBFundingCycleData calldata _data,
    JBFundingCycleMetadata calldata _metadata,
    uint256 _mustStartAtOrAfter,
    JBGroupedSplits[] memory _groupedSplits,
    JBFundAccessConstraints[] memory _fundAccessConstraints,
    string calldata _memo
  ) external returns (uint256);

  function issueTokenFor(
    uint256 _projectId,
    string calldata _name,
    string calldata _symbol
  ) external returns (IJBToken token);

  function changeTokenOf(
    uint256 _projectId,
    IJBToken _token,
    address _newOwner
  ) external;

  function mintTokensOf(
    uint256 _projectId,
    uint256 _tokenCount,
    address _beneficiary,
    string calldata _memo,
    bool _preferClaimedTokens,
    bool _useReservedRate
  ) external returns (uint256 beneficiaryTokenCount);

  function burnTokensOf(
    address _holder,
    uint256 _projectId,
    uint256 _tokenCount,
    string calldata _memo,
    bool _preferClaimedTokens
  ) external;

  function distributeReservedTokensOf(uint256 _projectId, string memory _memo)
    external
    returns (uint256);

  function migrate(uint256 _projectId, IJBMigratable _to) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import './IJBFundingCycleStore.sol';
import './IJBPaymentTerminal.sol';
import './IJBProjects.sol';

interface IJBDirectory {
  event SetController(uint256 indexed projectId, address indexed controller, address caller);

  event AddTerminal(uint256 indexed projectId, IJBPaymentTerminal indexed terminal, address caller);

  event SetTerminals(uint256 indexed projectId, IJBPaymentTerminal[] terminals, address caller);

  event SetPrimaryTerminal(
    uint256 indexed projectId,
    address indexed token,
    IJBPaymentTerminal indexed terminal,
    address caller
  );

  event SetIsAllowedToSetFirstController(address indexed addr, bool indexed flag, address caller);

  function projects() external view returns (IJBProjects);

  function fundingCycleStore() external view returns (IJBFundingCycleStore);

  function controllerOf(uint256 _projectId) external view returns (address);

  function isAllowedToSetFirstController(address _address) external view returns (bool);

  function terminalsOf(uint256 _projectId) external view returns (IJBPaymentTerminal[] memory);

  function isTerminalOf(uint256 _projectId, IJBPaymentTerminal _terminal)
    external
    view
    returns (bool);

  function primaryTerminalOf(uint256 _projectId, address _token)
    external
    view
    returns (IJBPaymentTerminal);

  function setControllerOf(uint256 _projectId, address _controller) external;

  function setTerminalsOf(uint256 _projectId, IJBPaymentTerminal[] calldata _terminals) external;

  function setPrimaryTerminalOf(
    uint256 _projectId,
    address _token,
    IJBPaymentTerminal _terminal
  ) external;

  function setIsAllowedToSetFirstController(address _address, bool _flag) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import '@openzeppelin/contracts/utils/introspection/IERC165.sol';
import './../enums/JBBallotState.sol';
import './IJBFundingCycleStore.sol';

interface IJBFundingCycleBallot is IERC165 {
  function duration() external view returns (uint256);

  function stateOf(
    uint256 _projectId,
    uint256 _configuration,
    uint256 _start
  ) external view returns (JBBallotState);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import '@openzeppelin/contracts/utils/introspection/IERC165.sol';
import './../structs/JBPayParamsData.sol';
import './../structs/JBRedeemParamsData.sol';
import './IJBFundingCycleStore.sol';
import './IJBPayDelegate.sol';
import './IJBRedemptionDelegate.sol';

/**
  @title
  Datasource

  @notice
  The datasource is called by JBPaymentTerminal on pay and redemption, and provide an extra layer of logic to use 
  a custom weight, a custom memo and/or a pay/redeem delegate

  @dev
  Adheres to:
  IERC165 for adequate interface integration
*/
interface IJBFundingCycleDataSource is IERC165 {
  /**
    @notice
    The datasource implementation for JBPaymentTerminal.pay(..)

    @param _data the data passed to the data source in terminal.pay(..), as a JBPayParamsData struct:
                  IJBPaymentTerminal terminal;
                  address payer;
                  JBTokenAmount amount;
                  uint256 projectId;
                  uint256 currentFundingCycleConfiguration;
                  address beneficiary;
                  uint256 weight;
                  uint256 reservedRate;
                  string memo;
                  bytes metadata;

    @return weight the weight to use to override the funding cycle weight
    @return memo the memo to override the pay(..) memo
    @return delegate the address of the pay delegate (might or might not be the same contract)
  */
  function payParams(JBPayParamsData calldata _data)
    external
    returns (
      uint256 weight,
      string memory memo,
      IJBPayDelegate delegate
    );

  /**
    @notice
    The datasource implementation for JBPaymentTerminal.redeemTokensOf(..)

    @param _data the data passed to the data source in terminal.redeemTokensOf(..), as a JBRedeemParamsData struct:
                    IJBPaymentTerminal terminal;
                    address holder;
                    uint256 projectId;
                    uint256 currentFundingCycleConfiguration;
                    uint256 tokenCount;
                    uint256 totalSupply;
                    uint256 overflow;
                    JBTokenAmount reclaimAmount;
                    bool useTotalOverflow;
                    uint256 redemptionRate;
                    uint256 ballotRedemptionRate;
                    string memo;
                    bytes metadata;

    @return reclaimAmount the amount to claim, overriding the terminal logic
    @return memo the memo to override the redeemTokensOf(..) memo
    @return delegate the address of the redemption delegate (might or might not be the same contract)
  */
  function redeemParams(JBRedeemParamsData calldata _data)
    external
    returns (
      uint256 reclaimAmount,
      string memory memo,
      IJBRedemptionDelegate delegate
    );
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import './../enums/JBBallotState.sol';
import './../structs/JBFundingCycle.sol';
import './../structs/JBFundingCycleData.sol';

interface IJBFundingCycleStore {
  event Configure(
    uint256 indexed configuration,
    uint256 indexed projectId,
    JBFundingCycleData data,
    uint256 metadata,
    uint256 mustStartAtOrAfter,
    address caller
  );

  event Init(uint256 indexed configuration, uint256 indexed projectId, uint256 indexed basedOn);

  function latestConfigurationOf(uint256 _projectId) external view returns (uint256);

  function get(uint256 _projectId, uint256 _configuration)
    external
    view
    returns (JBFundingCycle memory);

  function latestConfiguredOf(uint256 _projectId)
    external
    view
    returns (JBFundingCycle memory fundingCycle, JBBallotState ballotState);

  function queuedOf(uint256 _projectId) external view returns (JBFundingCycle memory fundingCycle);

  function currentOf(uint256 _projectId) external view returns (JBFundingCycle memory fundingCycle);

  function currentBallotStateOf(uint256 _projectId) external view returns (JBBallotState);

  function configureFor(
    uint256 _projectId,
    JBFundingCycleData calldata _data,
    uint256 _metadata,
    uint256 _mustStartAtOrAfter
  ) external returns (JBFundingCycle memory fundingCycle);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IJBMigratable {
  function prepForMigrationOf(uint256 _projectId, address _from) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import '@openzeppelin/contracts/utils/introspection/IERC165.sol';
import './../structs/JBDidPayData.sol';

/**
  @title
  Pay delegate

  @notice
  Delegate called after JBTerminal.pay(..) logic completion (if passed by the funding cycle datasource)

  @dev
  Adheres to:
  IERC165 for adequate interface integration
*/
interface IJBPayDelegate is IERC165 {
  /**
    @notice
    This function is called by JBPaymentTerminal.pay(..), after the execution of its logic

    @dev
    Critical business logic should be protected by an appropriate access control
    
    @param _data the data passed by the terminal, as a JBDidPayData struct:
                  address payer;
                  uint256 projectId;
                  uint256 currentFundingCycleConfiguration;
                  JBTokenAmount amount;
                  uint256 projectTokenCount;
                  address beneficiary;
                  bool preferClaimedTokens;
                  string memo;
                  bytes metadata;
  */
  function didPay(JBDidPayData calldata _data) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import '@openzeppelin/contracts/utils/introspection/IERC165.sol';

interface IJBPaymentTerminal is IERC165 {
  function acceptsToken(address _token, uint256 _projectId) external view returns (bool);

  function currencyForToken(address _token) external view returns (uint256);

  function decimalsForToken(address _token) external view returns (uint256);

  // Return value must be a fixed point number with 18 decimals.
  function currentEthOverflowOf(uint256 _projectId) external view returns (uint256);

  function pay(
    uint256 _projectId,
    uint256 _amount,
    address _token,
    address _beneficiary,
    uint256 _minReturnedTokens,
    bool _preferClaimedTokens,
    string calldata _memo,
    bytes calldata _metadata
  ) external payable returns (uint256 beneficiaryTokenCount);

  function addToBalanceOf(
    uint256 _projectId,
    uint256 _amount,
    address _token,
    string calldata _memo,
    bytes calldata _metadata
  ) external payable;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import '@openzeppelin/contracts/token/ERC721/IERC721.sol';
import './../structs/JBProjectMetadata.sol';
import './IJBTokenUriResolver.sol';

interface IJBProjects is IERC721 {
  event Create(
    uint256 indexed projectId,
    address indexed owner,
    JBProjectMetadata metadata,
    address caller
  );

  event SetMetadata(uint256 indexed projectId, JBProjectMetadata metadata, address caller);

  event SetTokenUriResolver(IJBTokenUriResolver indexed resolver, address caller);

  function count() external view returns (uint256);

  function metadataContentOf(uint256 _projectId, uint256 _domain)
    external
    view
    returns (string memory);

  function tokenUriResolver() external view returns (IJBTokenUriResolver);

  function createFor(address _owner, JBProjectMetadata calldata _metadata)
    external
    returns (uint256 projectId);

  function setMetadataOf(uint256 _projectId, JBProjectMetadata calldata _metadata) external;

  function setTokenUriResolver(IJBTokenUriResolver _newResolver) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import '@openzeppelin/contracts/utils/introspection/IERC165.sol';
import './../structs/JBDidRedeemData.sol';

/**
  @title
  Redemption delegate

  @notice
  Delegate called after JBTerminal.redeemTokensOf(..) logic completion (if passed by the funding cycle datasource)

  @dev
  Adheres to:
  IERC165 for adequate interface integration
*/
interface IJBRedemptionDelegate is IERC165 {
  /**
    @notice
    This function is called by JBPaymentTerminal.redeemTokensOf(..), after the execution of its logic

    @dev
    Critical business logic should be protected by an appropriate access control
    
    @param _data the data passed by the terminal, as a JBDidRedeemData struct:
                address holder;
                uint256 projectId;
                uint256 currentFundingCycleConfiguration;
                uint256 projectTokenCount;
                JBTokenAmount reclaimedAmount;
                address payable beneficiary;
                string memo;
                bytes metadata;
  */
  function didRedeem(JBDidRedeemData calldata _data) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import '@openzeppelin/contracts/utils/introspection/IERC165.sol';
import '../structs/JBSplitAllocationData.sol';

/**
  @title
  Split allocator

  @notice
  Provide a way to process a single split with extra logic

  @dev
  Adheres to:
  IERC165 for adequate interface integration

  @dev
  The contract address should be set as an allocator in the adequate split
*/
interface IJBSplitAllocator is IERC165 {
  /**
    @notice
    This function is called by JBPaymentTerminal.distributePayoutOf(..), during the processing of the split including it

    @dev
    Critical business logic should be protected by an appropriate access control. The token and/or eth are optimistically transfered
    to the allocator for its logic.
    
    @param _data the data passed by the terminal, as a JBSplitAllocationData struct:
                  address token;
                  uint256 amount;
                  uint256 decimals;
                  uint256 projectId;
                  uint256 group;
                  JBSplit split;
  */
  function allocate(JBSplitAllocationData calldata _data) external payable;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import './../structs/JBGroupedSplits.sol';
import './../structs/JBSplit.sol';
import './IJBDirectory.sol';
import './IJBProjects.sol';

interface IJBSplitsStore {
  event SetSplit(
    uint256 indexed projectId,
    uint256 indexed domain,
    uint256 indexed group,
    JBSplit split,
    address caller
  );

  function projects() external view returns (IJBProjects);

  function directory() external view returns (IJBDirectory);

  function splitsOf(
    uint256 _projectId,
    uint256 _domain,
    uint256 _group
  ) external view returns (JBSplit[] memory);

  function set(
    uint256 _projectId,
    uint256 _domain,
    JBGroupedSplits[] memory _groupedSplits
  ) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IJBToken {
  function decimals() external view returns (uint8);

  function totalSupply(uint256 _projectId) external view returns (uint256);

  function balanceOf(address _account, uint256 _projectId) external view returns (uint256);

  function mint(
    uint256 _projectId,
    address _account,
    uint256 _amount
  ) external;

  function burn(
    uint256 _projectId,
    address _account,
    uint256 _amount
  ) external;

  function approve(
    uint256,
    address _spender,
    uint256 _amount
  ) external;

  function transfer(
    uint256 _projectId,
    address _to,
    uint256 _amount
  ) external;

  function transferFrom(
    uint256 _projectId,
    address _from,
    address _to,
    uint256 _amount
  ) external;

  function transferOwnership(uint256 _projectId, address _newOwner) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import './IJBProjects.sol';
import './IJBToken.sol';

interface IJBTokenStore {
  event Issue(
    uint256 indexed projectId,
    IJBToken indexed token,
    string name,
    string symbol,
    address caller
  );

  event Mint(
    address indexed holder,
    uint256 indexed projectId,
    uint256 amount,
    bool tokensWereClaimed,
    bool preferClaimedTokens,
    address caller
  );

  event Burn(
    address indexed holder,
    uint256 indexed projectId,
    uint256 amount,
    uint256 initialUnclaimedBalance,
    uint256 initialClaimedBalance,
    bool preferClaimedTokens,
    address caller
  );

  event Claim(
    address indexed holder,
    uint256 indexed projectId,
    uint256 initialUnclaimedBalance,
    uint256 amount,
    address caller
  );

  event ShouldRequireClaim(uint256 indexed projectId, bool indexed flag, address caller);

  event Change(
    uint256 indexed projectId,
    IJBToken indexed newToken,
    IJBToken indexed oldToken,
    address owner,
    address caller
  );

  event Transfer(
    address indexed holder,
    uint256 indexed projectId,
    address indexed recipient,
    uint256 amount,
    address caller
  );

  function tokenOf(uint256 _projectId) external view returns (IJBToken);

  function projectOf(IJBToken _token) external view returns (uint256);

  function projects() external view returns (IJBProjects);

  function unclaimedBalanceOf(address _holder, uint256 _projectId) external view returns (uint256);

  function unclaimedTotalSupplyOf(uint256 _projectId) external view returns (uint256);

  function totalSupplyOf(uint256 _projectId) external view returns (uint256);

  function balanceOf(address _holder, uint256 _projectId) external view returns (uint256 _result);

  function requireClaimFor(uint256 _projectId) external view returns (bool);

  function issueFor(
    uint256 _projectId,
    string calldata _name,
    string calldata _symbol
  ) external returns (IJBToken token);

  function changeFor(
    uint256 _projectId,
    IJBToken _token,
    address _newOwner
  ) external returns (IJBToken oldToken);

  function burnFrom(
    address _holder,
    uint256 _projectId,
    uint256 _amount,
    bool _preferClaimedTokens
  ) external;

  function mintFor(
    address _holder,
    uint256 _projectId,
    uint256 _amount,
    bool _preferClaimedTokens
  ) external;

  function shouldRequireClaimingFor(uint256 _projectId, bool _flag) external;

  function claimFor(
    address _holder,
    uint256 _projectId,
    uint256 _amount
  ) external;

  function transferFrom(
    address _holder,
    uint256 _projectId,
    address _recipient,
    uint256 _amount
  ) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IJBTokenUriResolver {
  function getUri(uint256 _projectId) external view returns (string memory tokenUri);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import './JBTokenAmount.sol';

/** 
  @member payer The address from which the payment originated.
  @member projectId The ID of the project for which the payment was made.
  @member currentFundingCycleConfiguration The configuration of the funding cycle during which the payment is being made.
  @member amount The amount of the payment. Includes the token being paid, the value, the number of decimals included, and the currency of the amount.
  @member projectTokenCount The number of project tokens minted for the beneficiary.
  @member beneficiary The address to which the tokens were minted.
  @member preferClaimedTokens A flag indicating whether the request prefered to mint project tokens into the beneficiaries wallet rather than leaving them unclaimed. This is only possible if the project has an attached token contract.
  @member memo The memo that is being emitted alongside the payment.
  @member metadata Extra data to send to the delegate.
*/
struct JBDidPayData {
  address payer;
  uint256 projectId;
  uint256 currentFundingCycleConfiguration;
  JBTokenAmount amount;
  uint256 projectTokenCount;
  address beneficiary;
  bool preferClaimedTokens;
  string memo;
  bytes metadata;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import './JBTokenAmount.sol';

/** 
  @member holder The holder of the tokens being redeemed.
  @member projectId The ID of the project with which the redeemed tokens are associated.
  @member currentFundingCycleConfiguration The configuration of the funding cycle during which the redemption is being made.
  @member projectTokenCount The number of project tokens being redeemed.
  @member reclaimedAmount The amount reclaimed from the treasury. Includes the token being reclaimed, the value, the number of decimals included, and the currency of the amount.
  @member beneficiary The address to which the reclaimed amount will be sent.
  @member memo The memo that is being emitted alongside the redemption.
  @member metadata Extra data to send to the delegate.
*/
struct JBDidRedeemData {
  address holder;
  uint256 projectId;
  uint256 currentFundingCycleConfiguration;
  uint256 projectTokenCount;
  JBTokenAmount reclaimedAmount;
  address payable beneficiary;
  string memo;
  bytes metadata;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import './../interfaces/IJBPaymentTerminal.sol';

/** 
  @member terminal The terminal within which the distribution limit and the overflow allowance applies.
  @member token The token for which the fund access constraints apply.
  @member distributionLimit The amount of the distribution limit, as a fixed point number with the same number of decimals as the terminal within which the limit applies.
  @member distributionLimitCurrency The currency of the distribution limit.
  @member overflowAllowance The amount of the allowance, as a fixed point number with the same number of decimals as the terminal within which the allowance applies.
  @member overflowAllowanceCurrency The currency of the overflow allowance.
*/
struct JBFundAccessConstraints {
  IJBPaymentTerminal terminal;
  address token;
  uint256 distributionLimit;
  uint256 distributionLimitCurrency;
  uint256 overflowAllowance;
  uint256 overflowAllowanceCurrency;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import './../interfaces/IJBFundingCycleBallot.sol';

/** 
  @member number The funding cycle number for the cycle's project. Each funding cycle has a number that is an increment of the cycle that directly preceded it. Each project's first funding cycle has a number of 1.
  @member configuration The timestamp when the parameters for this funding cycle were configured. This value will stay the same for subsequent funding cycles that roll over from an originally configured cycle.
  @member basedOn The `configuration` of the funding cycle that was active when this cycle was created.
  @member start The timestamp marking the moment from which the funding cycle is considered active. It is a unix timestamp measured in seconds.
  @member duration The number of seconds the funding cycle lasts for, after which a new funding cycle will start. A duration of 0 means that the funding cycle will stay active until the project owner explicitly issues a reconfiguration, at which point a new funding cycle will immediately start with the updated properties. If the duration is greater than 0, a project owner cannot make changes to a funding cycle's parameters while it is active – any proposed changes will apply to the subsequent cycle. If no changes are proposed, a funding cycle rolls over to another one with the same properties but new `start` timestamp and a discounted `weight`.
  @member weight A fixed point number with 18 decimals that contracts can use to base arbitrary calculations on. For example, payment terminals can use this to determine how many tokens should be minted when a payment is received.
  @member discountRate A percent by how much the `weight` of the subsequent funding cycle should be reduced, if the project owner hasn't configured the subsequent funding cycle with an explicit `weight`. If it's 0, each funding cycle will have equal weight. If the number is 90%, the next funding cycle will have a 10% smaller weight. This weight is out of `JBConstants.MAX_DISCOUNT_RATE`.
  @member ballot An address of a contract that says whether a proposed reconfiguration should be accepted or rejected. It can be used to create rules around how a project owner can change funding cycle parameters over time.
  @member metadata Extra data that can be associated with a funding cycle.
*/
struct JBFundingCycle {
  uint256 number;
  uint256 configuration;
  uint256 basedOn;
  uint256 start;
  uint256 duration;
  uint256 weight;
  uint256 discountRate;
  IJBFundingCycleBallot ballot;
  uint256 metadata;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import './../interfaces/IJBFundingCycleBallot.sol';

/** 
  @member duration The number of seconds the funding cycle lasts for, after which a new funding cycle will start. A duration of 0 means that the funding cycle will stay active until the project owner explicitly issues a reconfiguration, at which point a new funding cycle will immediately start with the updated properties. If the duration is greater than 0, a project owner cannot make changes to a funding cycle's parameters while it is active – any proposed changes will apply to the subsequent cycle. If no changes are proposed, a funding cycle rolls over to another one with the same properties but new `start` timestamp and a discounted `weight`.
  @member weight A fixed point number with 18 decimals that contracts can use to base arbitrary calculations on. For example, payment terminals can use this to determine how many tokens should be minted when a payment is received.
  @member discountRate A percent by how much the `weight` of the subsequent funding cycle should be reduced, if the project owner hasn't configured the subsequent funding cycle with an explicit `weight`. If it's 0, each funding cycle will have equal weight. If the number is 90%, the next funding cycle will have a 10% smaller weight. This weight is out of `JBConstants.MAX_DISCOUNT_RATE`.
  @member ballot An address of a contract that says whether a proposed reconfiguration should be accepted or rejected. It can be used to create rules around how a project owner can change funding cycle parameters over time.
*/
struct JBFundingCycleData {
  uint256 duration;
  uint256 weight;
  uint256 discountRate;
  IJBFundingCycleBallot ballot;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import './JBGlobalFundingCycleMetadata.sol';
import './../interfaces/IJBFundingCycleDataSource.sol';

/** 
  @member global Data used globally in non-migratable ecosystem contracts.
  @member reservedRate The reserved rate of the funding cycle. This number is a percentage calculated out of `JBConstants.MAX_RESERVED_RATE`.
  @member redemptionRate The redemption rate of the funding cycle. This number is a percentage calculated out of `JBConstants.MAX_REDEMPTION_RATE`.
  @member ballotRedemptionRate The redemption rate to use during an active ballot of the funding cycle. This number is a percentage calculated out of `JBConstants.MAX_REDEMPTION_RATE`.
  @member pausePay A flag indicating if the pay functionality should be paused during the funding cycle.
  @member pauseDistributions A flag indicating if the distribute functionality should be paused during the funding cycle.
  @member pauseRedeem A flag indicating if the redeem functionality should be paused during the funding cycle.
  @member pauseBurn A flag indicating if the burn functionality should be paused during the funding cycle.
  @member allowMinting A flag indicating if the mint functionality should be allowed during the funding cycle.
  @member allowChangeToken A flag indicating if changing tokens should be allowed during this funding cycle.
  @member allowTerminalMigration A flag indicating if migrating terminals should be allowed during this funding cycle.
  @member allowControllerMigration A flag indicating if migrating controllers should be allowed during this funding cycle.
  @member holdFees A flag indicating if fees should be held during this funding cycle.
  @member useTotalOverflowForRedemptions A flag indicating if redemptions should use the project's balance held in all terminals instead of the project's local terminal balance from which the redemption is being fulfilled.
  @member useDataSourceForPay A flag indicating if the data source should be used for pay transactions during this funding cycle.
  @member useDataSourceForRedeem A flag indicating if the data source should be used for redeem transactions during this funding cycle.
  @member dataSource The data source to use during this funding cycle.
*/
struct JBFundingCycleMetadata {
  JBGlobalFundingCycleMetadata global;
  uint256 reservedRate;
  uint256 redemptionRate;
  uint256 ballotRedemptionRate;
  bool pausePay;
  bool pauseDistributions;
  bool pauseRedeem;
  bool pauseBurn;
  bool allowMinting;
  bool allowChangeToken;
  bool allowTerminalMigration;
  bool allowControllerMigration;
  bool holdFees;
  bool useTotalOverflowForRedemptions;
  bool useDataSourceForPay;
  bool useDataSourceForRedeem;
  address dataSource;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import './../interfaces/IJBFundingCycleDataSource.sol';

/** 
  @member allowSetTerminals A flag indicating if setting terminals should be allowed during this funding cycle.
  @member allowSetController A flag indicating if setting a new controller should be allowed during this funding cycle.
*/
struct JBGlobalFundingCycleMetadata {
  bool allowSetTerminals;
  bool allowSetController;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import './JBSplit.sol';

/** 
  @member group The group indentifier.
  @member splits The splits to associate with the group.
*/
struct JBGroupedSplits {
  uint256 group;
  JBSplit[] splits;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import './../interfaces/IJBPaymentTerminal.sol';
import './JBTokenAmount.sol';

/** 
  @member terminal The terminal that is facilitating the payment.
  @member payer The address from which the payment originated.
  @member amount The amount of the payment. Includes the token being paid, the value, the number of decimals included, and the currency of the amount.
  @member projectId The ID of the project being paid.
  @member currentFundingCycleConfiguration The configuration of the funding cycle during which the payment is being made.
  @member beneficiary The specified address that should be the beneficiary of anything that results from the payment.
  @member weight The weight of the funding cycle during which the payment is being made.
  @member reservedRate The reserved rate of the funding cycle during which the payment is being made.
  @member memo The memo that was sent alongside the payment.
  @member metadata Extra data provided by the payer.
*/
struct JBPayParamsData {
  IJBPaymentTerminal terminal;
  address payer;
  JBTokenAmount amount;
  uint256 projectId;
  uint256 currentFundingCycleConfiguration;
  address beneficiary;
  uint256 weight;
  uint256 reservedRate;
  string memo;
  bytes metadata;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/** 
  @member content The metadata content.
  @member domain The domain within which the metadata applies.
*/
struct JBProjectMetadata {
  string content;
  uint256 domain;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import './../interfaces/IJBPaymentTerminal.sol';
import './JBTokenAmount.sol';

/** 
  @member terminal The terminal that is facilitating the redemption.
  @member holder The holder of the tokens being redeemed.
  @member projectId The ID of the project whos tokens are being redeemed.
  @member currentFundingCycleConfiguration The configuration of the funding cycle during which the redemption is being made.
  @member tokenCount The proposed number of tokens being redeemed, as a fixed point number with 18 decimals.
  @member totalSupply The total supply of tokens used in the calculation, as a fixed point number with 18 decimals.
  @member overflow The amount of overflow used in the reclaim amount calculation.
  @member reclaimAmount The amount that should be reclaimed by the redeemer using the protocol's standard bonding curve redemption formula. Includes the token being reclaimed, the reclaim value, the number of decimals included, and the currency of the reclaim amount.
  @member useTotalOverflow If overflow across all of a project's terminals is being used when making redemptions.
  @member redemptionRate The redemption rate of the funding cycle during which the redemption is being made.
  @member ballotRedemptionRate The ballot redemption rate of the funding cycle during which the redemption is being made.
  @member memo The proposed memo that is being emitted alongside the redemption.
  @member metadata Extra data provided by the redeemer.
*/
struct JBRedeemParamsData {
  IJBPaymentTerminal terminal;
  address holder;
  uint256 projectId;
  uint256 currentFundingCycleConfiguration;
  uint256 tokenCount;
  uint256 totalSupply;
  uint256 overflow;
  JBTokenAmount reclaimAmount;
  bool useTotalOverflow;
  uint256 redemptionRate;
  uint256 ballotRedemptionRate;
  string memo;
  bytes metadata;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import './../interfaces/IJBSplitAllocator.sol';

/** 
  @member preferClaimed A flag that only has effect if a projectId is also specified, and the project has a token contract attached. If so, this flag indicates if the tokens that result from making a payment to the project should be delivered claimed into the beneficiary's wallet, or unclaimed to save gas.
  @member preferAddToBalance A flag indicating if a distribution to a project should prefer triggering it's addToBalance function instead of its pay function.
  @member percent The percent of the whole group that this split occupies. This number is out of `JBConstants.SPLITS_TOTAL_PERCENT`.
  @member projectId The ID of a project. If an allocator is not set but a projectId is set, funds will be sent to the protocol treasury belonging to the project who's ID is specified. Resulting tokens will be routed to the beneficiary with the claimed token preference respected.
  @member beneficiary An address. The role the of the beneficary depends on whether or not projectId is specified, and whether or not an allocator is specified. If allocator is set, the beneficiary will be forwarded to the allocator for it to use. If allocator is not set but projectId is set, the beneficiary is the address to which the project's tokens will be sent that result from a payment to it. If neither allocator or projectId are set, the beneficiary is where the funds from the split will be sent.
  @member lockedUntil Specifies if the split should be unchangeable until the specified time, with the exception of extending the locked period.
  @member allocator If an allocator is specified, funds will be sent to the allocator contract along with all properties of this split.
*/
struct JBSplit {
  bool preferClaimed;
  bool preferAddToBalance;
  uint256 percent;
  uint256 projectId;
  address payable beneficiary;
  uint256 lockedUntil;
  IJBSplitAllocator allocator;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import './JBSplit.sol';

/** 
  @member token The token being sent to the split allocator.
  @member amount The amount being sent to the split allocator, as a fixed point number.
  @member decimals The number of decimals in the amount.
  @member projectId The project to which the split belongs.
  @member group The group to which the split belongs.
  @member split The split that caused the allocation.
*/
struct JBSplitAllocationData {
  address token;
  uint256 amount;
  uint256 decimals;
  uint256 projectId;
  uint256 group;
  JBSplit split;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/* 
  @member token The token the payment was made in.
  @member value The amount of tokens that was paid, as a fixed point number.
  @member decimals The number of decimals included in the value fixed point number.
  @member currency The expected currency of the value.
**/
struct JBTokenAmount {
  address token;
  uint256 value;
  uint256 decimals;
  uint256 currency;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IJBToken {
  function projectId() external view returns (uint256);

  function decimals() external view returns (uint8);

  function totalSupply(uint256 _projectId) external view returns (uint256);

  function balanceOf(address _account, uint256 _projectId) external view returns (uint256);

  function mint(
    uint256 _projectId,
    address _account,
    uint256 _amount
  ) external;

  function burn(
    uint256 _projectId,
    address _account,
    uint256 _amount
  ) external;

  function approve(
    uint256,
    address _spender,
    uint256 _amount
  ) external;

  function transfer(
    uint256 _projectId,
    address _to,
    uint256 _amount
  ) external;

  function transferFrom(
    uint256 _projectId,
    address _from,
    address _to,
    uint256 _amount
  ) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be _NOT_ENTERED
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == _ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/extensions/ERC20Permit.sol)

pragma solidity ^0.8.0;

import "./IERC20Permit.sol";
import "../ERC20.sol";
import "../../../utils/cryptography/ECDSA.sol";
import "../../../utils/cryptography/EIP712.sol";
import "../../../utils/Counters.sol";

/**
 * @dev Implementation of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * _Available since v3.4._
 */
abstract contract ERC20Permit is ERC20, IERC20Permit, EIP712 {
    using Counters for Counters.Counter;

    mapping(address => Counters.Counter) private _nonces;

    // solhint-disable-next-line var-name-mixedcase
    bytes32 private constant _PERMIT_TYPEHASH =
        keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
    /**
     * @dev In previous versions `_PERMIT_TYPEHASH` was declared as `immutable`.
     * However, to ensure consistency with the upgradeable transpiler, we will continue
     * to reserve a slot.
     * @custom:oz-renamed-from _PERMIT_TYPEHASH
     */
    // solhint-disable-next-line var-name-mixedcase
    bytes32 private _PERMIT_TYPEHASH_DEPRECATED_SLOT;

    /**
     * @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `"1"`.
     *
     * It's a good idea to use the same `name` that is defined as the ERC20 token name.
     */
    constructor(string memory name) EIP712(name, "1") {}

    /**
     * @dev See {IERC20Permit-permit}.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual override {
        require(block.timestamp <= deadline, "ERC20Permit: expired deadline");

        bytes32 structHash = keccak256(abi.encode(_PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));

        bytes32 hash = _hashTypedDataV4(structHash);

        address signer = ECDSA.recover(hash, v, r, s);
        require(signer == owner, "ERC20Permit: invalid signature");

        _approve(owner, spender, value);
    }

    /**
     * @dev See {IERC20Permit-nonces}.
     */
    function nonces(address owner) public view virtual override returns (uint256) {
        return _nonces[owner].current();
    }

    /**
     * @dev See {IERC20Permit-DOMAIN_SEPARATOR}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view override returns (bytes32) {
        return _domainSeparatorV4();
    }

    /**
     * @dev "Consume a nonce": return the current value and increment.
     *
     * _Available since v4.1._
     */
    function _useNonce(address owner) internal virtual returns (uint256 current) {
        Counters.Counter storage nonce = _nonces[owner];
        current = nonce.current();
        nonce.increment();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/IERC721.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
     * understand this adds an external call which potentially creates a reentrancy vulnerability.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)

pragma solidity ^0.8.0;

/**
 * @title Counters
 * @author Matt Condon (@shrugs)
 * @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
 * of elements in a mapping, issuing ERC721 ids, or counting request ids.
 *
 * Include with `using Counters for Counters.Counter;`
 */
library Counters {
    struct Counter {
        // This variable should never be directly accessed by users of the library: interactions must be restricted to
        // the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
        // this feature: see https://github.com/ethereum/solidity/issues/4637
        uint256 _value; // default: 0
    }

    function current(Counter storage counter) internal view returns (uint256) {
        return counter._value;
    }

    function increment(Counter storage counter) internal {
        unchecked {
            counter._value += 1;
        }
    }

    function decrement(Counter storage counter) internal {
        uint256 value = counter._value;
        require(value > 0, "Counter: decrement overflow");
        unchecked {
            counter._value = value - 1;
        }
    }

    function reset(Counter storage counter) internal {
        counter._value = 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

import "./math/Math.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.0;

import "../Strings.sol";

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS,
        InvalidSignatureV // Deprecated in v4.8
    }

    function _throwError(RecoverError error) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert("ECDSA: invalid signature");
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert("ECDSA: invalid signature length");
        } else if (error == RecoverError.InvalidSignatureS) {
            revert("ECDSA: invalid signature 's' value");
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature` or error string. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength);
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, signature);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address, RecoverError) {
        bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
        uint8 v = uint8((uint256(vs) >> 255) + 27);
        return tryRecover(hash, v, r, s);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     *
     * _Available since v4.2._
     */
    function recover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, r, vs);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature);
        }

        return (signer, RecoverError.NoError);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from a `hash`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
        // 32 is the length in bytes of hash,
        // enforced by the type signature above
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from `s`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
    }

    /**
     * @dev Returns an Ethereum Signed Typed Data, created from a
     * `domainSeparator` and a `structHash`. This produces hash corresponding
     * to the one signed with the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
     * JSON-RPC method as part of EIP-712.
     *
     * See {recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/cryptography/EIP712.sol)

pragma solidity ^0.8.0;

import "./ECDSA.sol";

/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
 * thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
 * they need in their contracts using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * _Available since v3.4._
 */
abstract contract EIP712 {
    /* solhint-disable var-name-mixedcase */
    // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
    // invalidate the cached domain separator if the chain id changes.
    bytes32 private immutable _CACHED_DOMAIN_SEPARATOR;
    uint256 private immutable _CACHED_CHAIN_ID;
    address private immutable _CACHED_THIS;

    bytes32 private immutable _HASHED_NAME;
    bytes32 private immutable _HASHED_VERSION;
    bytes32 private immutable _TYPE_HASH;

    /* solhint-enable var-name-mixedcase */

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    constructor(string memory name, string memory version) {
        bytes32 hashedName = keccak256(bytes(name));
        bytes32 hashedVersion = keccak256(bytes(version));
        bytes32 typeHash = keccak256(
            "EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"
        );
        _HASHED_NAME = hashedName;
        _HASHED_VERSION = hashedVersion;
        _CACHED_CHAIN_ID = block.chainid;
        _CACHED_DOMAIN_SEPARATOR = _buildDomainSeparator(typeHash, hashedName, hashedVersion);
        _CACHED_THIS = address(this);
        _TYPE_HASH = typeHash;
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        if (address(this) == _CACHED_THIS && block.chainid == _CACHED_CHAIN_ID) {
            return _CACHED_DOMAIN_SEPARATOR;
        } else {
            return _buildDomainSeparator(_TYPE_HASH, _HASHED_NAME, _HASHED_VERSION);
        }
    }

    function _buildDomainSeparator(
        bytes32 typeHash,
        bytes32 nameHash,
        bytes32 versionHash
    ) private view returns (bytes32) {
        return keccak256(abi.encode(typeHash, nameHash, versionHash, block.chainid, address(this)));
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return ECDSA.toTypedDataHash(_domainSeparatorV4(), structHash);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1, "Math: mulDiv overflow");

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10**64) {
                value /= 10**64;
                result += 64;
            }
            if (value >= 10**32) {
                value /= 10**32;
                result += 32;
            }
            if (value >= 10**16) {
                value /= 10**16;
                result += 16;
            }
            if (value >= 10**8) {
                value /= 10**8;
                result += 8;
            }
            if (value >= 10**4) {
                value /= 10**4;
                result += 4;
            }
            if (value >= 10**2) {
                value /= 10**2;
                result += 2;
            }
            if (value >= 10**1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);
        }
    }
}

{
  "remappings": [
    "@chainlink/=lib/juice-contracts-v2/lib/chainlink/",
    "@jbx-protocol-v1/=lib/juice-contracts-v1/",
    "@jbx-protocol-v2/=lib/juice-contracts-v2/",
    "@jbx-protocol-v3/=lib/juice-contracts-v3/",
    "@juicebox/=lib/juice-contracts-v2/contracts/",
    "@openzeppelin/contracts/=lib/openzeppelin-contracts/contracts/",
    "@paulrberg/contracts/math/=lib/juice-contracts-v2/lib/prb-math/contracts/",
    "chainlink/=lib/juice-contracts-v2/lib/chainlink/",
    "ds-test/=lib/forge-std/lib/ds-test/src/",
    "erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
    "forge-std/=lib/forge-std/src/",
    "juice-contracts-v1/=lib/juice-contracts-v1/contracts/",
    "juice-contracts-v2/=lib/juice-contracts-v2/contracts/",
    "juice-contracts-v3/=lib/juice-contracts-v3/contracts/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/contracts/",
    "openzeppelin-contracts/contracts/=lib/juice-contracts-v2/lib/openzeppelin-contracts/contracts/",
    "prb-math/=lib/juice-contracts-v2/lib/prb-math/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 10000000
  },
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "london",
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"string","name":"_name","type":"string"},{"internalType":"string","name":"_symbol","type":"string"},{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"contract ITicketBooth","name":"_v1TicketBooth","type":"address"},{"internalType":"contract IJBTokenStore","name":"_v2TokenStore","type":"address"},{"internalType":"uint256","name":"_v1ProjectId","type":"uint256"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"BAD_PROJECT","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"DOMAIN_SEPARATOR","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"address","name":"_spender","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"approve","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_account","type":"address"},{"internalType":"uint256","name":"_projectId","type":"uint256"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"address","name":"_account","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"migrate","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"address","name":"_account","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"mint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"nonces","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"},{"internalType":"uint8","name":"v","type":"uint8"},{"internalType":"bytes32","name":"r","type":"bytes32"},{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"permit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"projectId","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"}],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"transfer","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"address","name":"_from","type":"address"},{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"transferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"v1ProjectId","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"v1TicketBooth","outputs":[{"internalType":"contract ITicketBooth","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"v2TokenStore","outputs":[{"internalType":"contract IJBTokenStore","name":"","type":"address"}],"stateMutability":"view","type":"function"}]

6101c06040523480156200001257600080fd5b50604051620031063803806200310683398101604081905262000035916200026c565b6040805180820190915260018152603160f81b60208201528690819081886003620000618382620003a3565b506004620000708282620003a3565b5050825160209384012082519284019290922060e08390526101008190524660a0818152604080517f8b73c3c69bb8fe3d512ecc4cf759cc79239f7b179b0ffacaa9a75d522b39400f818901819052818301979097526060810194909452608080850193909352308483018190528151808603909301835260c09485019091528151919096012090529290925261012052506200010f9050336200013c565b6001600855610140939093526001600160a01b039182166101605216610180526101a052506200046f9050565b600780546001600160a01b038381166001600160a01b0319831681179093556040519116919082907f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e090600090a35050565b634e487b7160e01b600052604160045260246000fd5b600082601f830112620001b657600080fd5b81516001600160401b0380821115620001d357620001d36200018e565b604051601f8301601f19908116603f01168101908282118183101715620001fe57620001fe6200018e565b816040528381526020925086838588010111156200021b57600080fd5b600091505b838210156200023f578582018301518183018401529082019062000220565b600093810190920192909252949350505050565b6001600160a01b03811681146200026957600080fd5b50565b60008060008060008060c087890312156200028657600080fd5b86516001600160401b03808211156200029e57600080fd5b620002ac8a838b01620001a4565b97506020890151915080821115620002c357600080fd5b50620002d289828a01620001a4565b955050604087015193506060870151620002ec8162000253565b6080880151909350620002ff8162000253565b8092505060a087015190509295509295509295565b600181811c908216806200032957607f821691505b6020821081036200034a57634e487b7160e01b600052602260045260246000fd5b50919050565b601f8211156200039e57600081815260208120601f850160051c81016020861015620003795750805b601f850160051c820191505b818110156200039a5782815560010162000385565b5050505b505050565b81516001600160401b03811115620003bf57620003bf6200018e565b620003d781620003d0845462000314565b8462000350565b602080601f8311600181146200040f5760008415620003f65750858301515b600019600386901b1c1916600185901b1785556200039a565b600085815260208120601f198616915b8281101562000440578886015182559484019460019091019084016200041f565b50858210156200045f5787850151600019600388901b60f8161c191681555b5050505050600190811b01905550565b60805160a05160c05160e05161010051610120516101405161016051610180516101a051612b26620005e06000396000818161042d015281816105970152818161062b015281816106f8015281816118b50152818161194701528181611a1e01528181611af80152611d530152600081816103ba015281816107ad0152818161083a0152818161090701528181611e0301528181611e9301528181611f8201526122000152600081816101d7015281816105c1015281816106510152818161071e015281816118dd0152818161197001528181611a5f01528181611b210152611d860152600081816102db01528181610814015281816108e1015281816109ba01528181610aeb01528181610b5301528181610c0401528181610fcb01528181611e6a01528181611f410152818161203a0152818161210e01526121cd015260006115b601526000611605015260006115e001526000611539015260006115630152600061158d0152612b266000f3fe608060405234801561001057600080fd5b50600436106101cd5760003560e01c8063836a104011610104578063a457c2d7116100a2578063d7388f0511610071578063d7388f0514610428578063dd62ed3e1461044f578063f2fde38b14610495578063f8548e36146104a857600080fd5b8063a457c2d7146103dc578063a9059cbb146103ef578063bd85b03914610402578063d505accf1461041557600080fd5b80638fd3ab80116100de5780638fd3ab801461039257806395d89b411461039a5780639eea5f66146103a2578063a2ba0e79146103b557600080fd5b8063836a10401461034e5780638cb0a511146103615780638da5cb5b1461037457600080fd5b8063313ce567116101715780633fafa1271161014b5780633fafa127146102d657806370a08231146102fd578063715018a6146103335780637ecebe001461033b57600080fd5b8063313ce567146102ac5780633644e515146102bb57806339509351146102c357600080fd5b8063095ea7b3116101ad578063095ea7b31461025957806318160ddd1461027c5780631c0f12b61461028457806323b872dd1461029957600080fd5b8062263783146101d2578062fdd58e1461022357806306fdde0314610244575b600080fd5b6101f97f000000000000000000000000000000000000000000000000000000000000000081565b60405173ffffffffffffffffffffffffffffffffffffffff90911681526020015b60405180910390f35b610236610231366004612792565b6104bb565b60405190815260200161021a565b61024c6104e8565b60405161021a91906127be565b61026c610267366004612792565b61057a565b604051901515815260200161021a565b610236610592565b61029761029236600461282a565b6109b8565b005b61026c6102a7366004612872565b610a23565b6040516012815260200161021a565b610236610a4c565b61026c6102d1366004612792565b610a56565b6102367f000000000000000000000000000000000000000000000000000000000000000081565b61023661030b3660046128b3565b73ffffffffffffffffffffffffffffffffffffffff1660009081526020819052604090205490565b610297610aa2565b6102366103493660046128b3565b610ab6565b61029761035c3660046128d7565b610ae1565b61029761036f3660046128d7565b610b51565b60075473ffffffffffffffffffffffffffffffffffffffff166101f9565b610297610bba565b61024c610beb565b6102976103b03660046128d7565b610bfa565b6101f97f000000000000000000000000000000000000000000000000000000000000000081565b61026c6103ea366004612792565b610c65565b61026c6103fd366004612792565b610d3b565b6102366104103660046128fe565b610d49565b610297610423366004612917565b610d53565b6102367f000000000000000000000000000000000000000000000000000000000000000081565b61023661045d36600461298e565b73ffffffffffffffffffffffffffffffffffffffff918216600090815260016020908152604080832093909416825291909152205490565b6102976104a33660046128b3565b610f12565b6102976104b63660046128d7565b610fc9565b73ffffffffffffffffffffffffffffffffffffffff82166000908152602081905260409020545b92915050565b6060600380546104f7906129c7565b80601f0160208091040260200160405190810160405280929190818152602001828054610523906129c7565b80156105705780601f1061054557610100808354040283529160200191610570565b820191906000526020600020905b81548152906001019060200180831161055357829003601f168201915b5050505050905090565b60003361058881858561102c565b5060019392505050565b6000807f0000000000000000000000000000000000000000000000000000000000000000158015906105f957507f000000000000000000000000000000000000000000000000000000000000000073ffffffffffffffffffffffffffffffffffffffff1615155b156107ab576040517efdd58e0000000000000000000000000000000000000000000000000000000081523060048201527f000000000000000000000000000000000000000000000000000000000000000060248201527f000000000000000000000000000000000000000000000000000000000000000073ffffffffffffffffffffffffffffffffffffffff169062fdd58e90604401602060405180830381865afa1580156106ac573d6000803e3d6000fd5b505050506040513d601f19601f820116820180604052508101906106d09190612a14565b6040517f75b0d9cd0000000000000000000000000000000000000000000000000000000081527f000000000000000000000000000000000000000000000000000000000000000060048201527f000000000000000000000000000000000000000000000000000000000000000073ffffffffffffffffffffffffffffffffffffffff16906375b0d9cd90602401602060405180830381865afa15801561077a573d6000803e3d6000fd5b505050506040513d601f19601f8201168201806040525081019061079e9190612a14565b6107a89190612a5c565b90505b7f000000000000000000000000000000000000000000000000000000000000000073ffffffffffffffffffffffffffffffffffffffff161561099e576040517efdd58e0000000000000000000000000000000000000000000000000000000081523060048201527f000000000000000000000000000000000000000000000000000000000000000060248201527f000000000000000000000000000000000000000000000000000000000000000073ffffffffffffffffffffffffffffffffffffffff169062fdd58e90604401602060405180830381865afa158015610895573d6000803e3d6000fd5b505050506040513d601f19601f820116820180604052508101906108b99190612a14565b6040517f75b0d9cd0000000000000000000000000000000000000000000000000000000081527f000000000000000000000000000000000000000000000000000000000000000060048201527f000000000000000000000000000000000000000000000000000000000000000073ffffffffffffffffffffffffffffffffffffffff16906375b0d9cd90602401602060405180830381865afa158015610963573d6000803e3d6000fd5b505050506040513d601f19601f820116820180604052508101906109879190612a14565b6109919190612a5c565b61099b9082612a6f565b90505b806109a860025490565b6109b29190612a6f565b91505090565b7f00000000000000000000000000000000000000000000000000000000000000008414610a11576040517fcdceed0000000000000000000000000000000000000000000000000000000000815260040160405180910390fd5b610a1c838383610a23565b5050505050565b600033610a318582856111df565b610a3c8585856112b0565b506001949350505050565b905090565b6000610a4761151f565b33600081815260016020908152604080832073ffffffffffffffffffffffffffffffffffffffff871684529091528120549091906105889082908690610a9d908790612a6f565b61102c565b610aaa611653565b610ab460006116d4565b565b73ffffffffffffffffffffffffffffffffffffffff81166000908152600560205260408120546104e2565b610ae9611653565b7f00000000000000000000000000000000000000000000000000000000000000008314610b42576040517fcdceed0000000000000000000000000000000000000000000000000000000000815260040160405180910390fd5b610b4c828261174b565b505050565b7f00000000000000000000000000000000000000000000000000000000000000008314610baa576040517fcdceed0000000000000000000000000000000000000000000000000000000000815260040160405180910390fd5b610bb4828261057a565b50505050565b610bc261183e565b6000610bcc6118b1565b01610bd5611dff565b01610be0338261174b565b50610ab46001600855565b6060600480546104f7906129c7565b610c02611653565b7f00000000000000000000000000000000000000000000000000000000000000008314610c5b576040517fcdceed0000000000000000000000000000000000000000000000000000000000815260040160405180910390fd5b610b4c8282612244565b33600081815260016020908152604080832073ffffffffffffffffffffffffffffffffffffffff8716845290915281205490919083811015610d2e576040517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152602560248201527f45524332303a2064656372656173656420616c6c6f77616e63652062656c6f7760448201527f207a65726f00000000000000000000000000000000000000000000000000000060648201526084015b60405180910390fd5b610a3c828686840361102c565b6000336105888185856112b0565b60006104e2610592565b83421115610dbd576040517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152601d60248201527f45524332305065726d69743a206578706972656420646561646c696e650000006044820152606401610d25565b60007f6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9888888610dec8c612408565b60408051602081019690965273ffffffffffffffffffffffffffffffffffffffff94851690860152929091166060840152608083015260a082015260c0810186905260e0016040516020818303038152906040528051906020012090506000610e548261243d565b90506000610e64828787876124a6565b90508973ffffffffffffffffffffffffffffffffffffffff168173ffffffffffffffffffffffffffffffffffffffff1614610efb576040517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152601e60248201527f45524332305065726d69743a20696e76616c6964207369676e617475726500006044820152606401610d25565b610f068a8a8a61102c565b50505050505050505050565b610f1a611653565b73ffffffffffffffffffffffffffffffffffffffff8116610fbd576040517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152602660248201527f4f776e61626c653a206e6577206f776e657220697320746865207a65726f206160448201527f64647265737300000000000000000000000000000000000000000000000000006064820152608401610d25565b610fc6816116d4565b50565b7f00000000000000000000000000000000000000000000000000000000000000008314611022576040517fcdceed0000000000000000000000000000000000000000000000000000000000815260040160405180910390fd5b610bb48282610d3b565b73ffffffffffffffffffffffffffffffffffffffff83166110ce576040517f08c379a0000000000000000000000000000000000000000000000000000000008152602060048201526024808201527f45524332303a20617070726f76652066726f6d20746865207a65726f2061646460448201527f72657373000000000000000000000000000000000000000000000000000000006064820152608401610d25565b73ffffffffffffffffffffffffffffffffffffffff8216611171576040517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152602260248201527f45524332303a20617070726f766520746f20746865207a65726f20616464726560448201527f73730000000000000000000000000000000000000000000000000000000000006064820152608401610d25565b73ffffffffffffffffffffffffffffffffffffffff83811660008181526001602090815260408083209487168084529482529182902085905590518481527f8c5be1e5ebec7d5bd14f71427d1e84f3dd0314c0f7b2291e5b200ac8c7c3b925910160405180910390a3505050565b73ffffffffffffffffffffffffffffffffffffffff8381166000908152600160209081526040808320938616835292905220547fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff8114610bb457818110156112a3576040517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152601d60248201527f45524332303a20696e73756666696369656e7420616c6c6f77616e63650000006044820152606401610d25565b610bb4848484840361102c565b73ffffffffffffffffffffffffffffffffffffffff8316611353576040517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152602560248201527f45524332303a207472616e736665722066726f6d20746865207a65726f20616460448201527f64726573730000000000000000000000000000000000000000000000000000006064820152608401610d25565b73ffffffffffffffffffffffffffffffffffffffff82166113f6576040517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152602360248201527f45524332303a207472616e7366657220746f20746865207a65726f206164647260448201527f65737300000000000000000000000000000000000000000000000000000000006064820152608401610d25565b73ffffffffffffffffffffffffffffffffffffffff8316600090815260208190526040902054818110156114ac576040517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152602660248201527f45524332303a207472616e7366657220616d6f756e742065786365656473206260448201527f616c616e636500000000000000000000000000000000000000000000000000006064820152608401610d25565b73ffffffffffffffffffffffffffffffffffffffff848116600081815260208181526040808320878703905593871680835291849020805487019055925185815290927fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef910160405180910390a3610bb4565b60003073ffffffffffffffffffffffffffffffffffffffff7f00000000000000000000000000000000000000000000000000000000000000001614801561158557507f000000000000000000000000000000000000000000000000000000000000000046145b156115af57507f000000000000000000000000000000000000000000000000000000000000000090565b50604080517f00000000000000000000000000000000000000000000000000000000000000006020808301919091527f0000000000000000000000000000000000000000000000000000000000000000828401527f000000000000000000000000000000000000000000000000000000000000000060608301524660808301523060a0808401919091528351808403909101815260c0909201909252805191012090565b60075473ffffffffffffffffffffffffffffffffffffffff163314610ab4576040517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820181905260248201527f4f776e61626c653a2063616c6c6572206973206e6f7420746865206f776e65726044820152606401610d25565b6007805473ffffffffffffffffffffffffffffffffffffffff8381167fffffffffffffffffffffffff0000000000000000000000000000000000000000831681179093556040519116919082907f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e090600090a35050565b73ffffffffffffffffffffffffffffffffffffffff82166117c8576040517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152601f60248201527f45524332303a206d696e7420746f20746865207a65726f2061646472657373006044820152606401610d25565b80600260008282546117da9190612a6f565b909155505073ffffffffffffffffffffffffffffffffffffffff8216600081815260208181526040808320805486019055518481527fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef910160405180910390a35050565b6002600854036118aa576040517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152601f60248201527f5265656e7472616e637947756172643a207265656e7472616e742063616c6c006044820152606401610d25565b6002600855565b60007f0000000000000000000000000000000000000000000000000000000000000000158061191457507f000000000000000000000000000000000000000000000000000000000000000073ffffffffffffffffffffffffffffffffffffffff16155b1561191f5750600090565b6040517f465909fc0000000000000000000000000000000000000000000000000000000081527f000000000000000000000000000000000000000000000000000000000000000060048201526000907f000000000000000000000000000000000000000000000000000000000000000073ffffffffffffffffffffffffffffffffffffffff169063465909fc90602401602060405180830381865afa1580156119cc573d6000803e3d6000fd5b505050506040513d601f19601f820116820180604052508101906119f09190612a82565b6040517fb656463b0000000000000000000000000000000000000000000000000000000081523360048201527f0000000000000000000000000000000000000000000000000000000000000000602482015290915060009073ffffffffffffffffffffffffffffffffffffffff7f0000000000000000000000000000000000000000000000000000000000000000169063b656463b90604401602060405180830381865afa158015611aa6573d6000803e3d6000fd5b505050506040513d601f19601f82011682018060405250810190611aca9190612a14565b6040517f8ef4c8070000000000000000000000000000000000000000000000000000000081523360048201527f000000000000000000000000000000000000000000000000000000000000000060248201529091507f000000000000000000000000000000000000000000000000000000000000000073ffffffffffffffffffffffffffffffffffffffff1690638ef4c80790604401602060405180830381865afa158015611b7d573d6000803e3d6000fd5b505050506040513d601f19601f82011682018060405250810190611ba19190612a14565b611bab9082612a5c565b9050600073ffffffffffffffffffffffffffffffffffffffff831615611c5e576040517f70a0823100000000000000000000000000000000000000000000000000000000815233600482015273ffffffffffffffffffffffffffffffffffffffff8416906370a0823190602401602060405180830381865afa158015611c35573d6000803e3d6000fd5b505050506040513d601f19601f82011682018060405250810190611c599190612a14565b611c61565b60005b9050818101935083600003611c7a576000935050505090565b8015611d1f576040517f23b872dd0000000000000000000000000000000000000000000000000000000081523360048201523060248201526044810182905273ffffffffffffffffffffffffffffffffffffffff8416906323b872dd906064016020604051808303816000875af1158015611cf9573d6000803e3d6000fd5b505050506040513d601f19601f82011682018060405250810190611d1d9190612a9f565b505b8115611df9576040517f33681fb10000000000000000000000000000000000000000000000000000000081523360048201527f00000000000000000000000000000000000000000000000000000000000000006024820152604481018390523060648201527f000000000000000000000000000000000000000000000000000000000000000073ffffffffffffffffffffffffffffffffffffffff16906333681fb1906084015b600060405180830381600087803b158015611de057600080fd5b505af1158015611df4573d6000803e3d6000fd5b505050505b50505090565b60007f000000000000000000000000000000000000000000000000000000000000000073ffffffffffffffffffffffffffffffffffffffff16611e425750600090565b6040517fea78803f0000000000000000000000000000000000000000000000000000000081527f000000000000000000000000000000000000000000000000000000000000000060048201526000907f000000000000000000000000000000000000000000000000000000000000000073ffffffffffffffffffffffffffffffffffffffff169063ea78803f90602401602060405180830381865afa158015611eef573d6000803e3d6000fd5b505050506040513d601f19601f82011682018060405250810190611f139190612a82565b6040517f5287af370000000000000000000000000000000000000000000000000000000081523360048201527f0000000000000000000000000000000000000000000000000000000000000000602482015290915060009073ffffffffffffffffffffffffffffffffffffffff7f00000000000000000000000000000000000000000000000000000000000000001690635287af3790604401602060405180830381865afa158015611fc9573d6000803e3d6000fd5b505050506040513d601f19601f82011682018060405250810190611fed9190612a14565b9050600073ffffffffffffffffffffffffffffffffffffffff8316156120c4576040517efdd58e0000000000000000000000000000000000000000000000000000000081523360048201527f0000000000000000000000000000000000000000000000000000000000000000602482015273ffffffffffffffffffffffffffffffffffffffff84169062fdd58e90604401602060405180830381865afa15801561209b573d6000803e3d6000fd5b505050506040513d601f19601f820116820180604052508101906120bf9190612a14565b6120c7565b60005b90508181019350836000036120e0576000935050505090565b8015612199576040517f1c0f12b60000000000000000000000000000000000000000000000000000000081527f000000000000000000000000000000000000000000000000000000000000000060048201523360248201523060448201526064810182905273ffffffffffffffffffffffffffffffffffffffff841690631c0f12b690608401600060405180830381600087803b15801561218057600080fd5b505af1158015612194573d6000803e3d6000fd5b505050505b8115611df9576040517fac689bcd0000000000000000000000000000000000000000000000000000000081523360048201527f00000000000000000000000000000000000000000000000000000000000000006024820152306044820152606481018390527f000000000000000000000000000000000000000000000000000000000000000073ffffffffffffffffffffffffffffffffffffffff169063ac689bcd90608401611dc6565b73ffffffffffffffffffffffffffffffffffffffff82166122e7576040517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152602160248201527f45524332303a206275726e2066726f6d20746865207a65726f2061646472657360448201527f73000000000000000000000000000000000000000000000000000000000000006064820152608401610d25565b73ffffffffffffffffffffffffffffffffffffffff82166000908152602081905260409020548181101561239d576040517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152602260248201527f45524332303a206275726e20616d6f756e7420657863656564732062616c616e60448201527f63650000000000000000000000000000000000000000000000000000000000006064820152608401610d25565b73ffffffffffffffffffffffffffffffffffffffff83166000818152602081815260408083208686039055600280548790039055518581529192917fddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef910160405180910390a3505050565b73ffffffffffffffffffffffffffffffffffffffff811660009081526005602052604090208054600181018255905b50919050565b60006104e261244a61151f565b836040517f19010000000000000000000000000000000000000000000000000000000000006020820152602281018390526042810182905260009060620160405160208183030381529060405280519060200120905092915050565b60008060006124b7878787876124ce565b915091506124c4816125bd565b5095945050505050565b6000807f7fffffffffffffffffffffffffffffff5d576e7357a4501ddfe92f46681b20a083111561250557506000905060036125b4565b6040805160008082526020820180845289905260ff881692820192909252606081018690526080810185905260019060a0016020604051602081039080840390855afa158015612559573d6000803e3d6000fd5b50506040517fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffe0015191505073ffffffffffffffffffffffffffffffffffffffff81166125ad576000600192509250506125b4565b9150600090505b94509492505050565b60008160048111156125d1576125d1612ac1565b036125d95750565b60018160048111156125ed576125ed612ac1565b03612654576040517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152601860248201527f45434453413a20696e76616c6964207369676e617475726500000000000000006044820152606401610d25565b600281600481111561266857612668612ac1565b036126cf576040517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152601f60248201527f45434453413a20696e76616c6964207369676e6174757265206c656e677468006044820152606401610d25565b60038160048111156126e3576126e3612ac1565b03610fc6576040517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152602260248201527f45434453413a20696e76616c6964207369676e6174757265202773272076616c60448201527f75650000000000000000000000000000000000000000000000000000000000006064820152608401610d25565b73ffffffffffffffffffffffffffffffffffffffff81168114610fc657600080fd5b600080604083850312156127a557600080fd5b82356127b081612770565b946020939093013593505050565b600060208083528351808285015260005b818110156127eb578581018301518582016040015282016127cf565b5060006040828601015260407fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffe0601f8301168501019250505092915050565b6000806000806080858703121561284057600080fd5b84359350602085013561285281612770565b9250604085013561286281612770565b9396929550929360600135925050565b60008060006060848603121561288757600080fd5b833561289281612770565b925060208401356128a281612770565b929592945050506040919091013590565b6000602082840312156128c557600080fd5b81356128d081612770565b9392505050565b6000806000606084860312156128ec57600080fd5b8335925060208401356128a281612770565b60006020828403121561291057600080fd5b5035919050565b600080600080600080600060e0888a03121561293257600080fd5b873561293d81612770565b9650602088013561294d81612770565b95506040880135945060608801359350608088013560ff8116811461297157600080fd5b9699959850939692959460a0840135945060c09093013592915050565b600080604083850312156129a157600080fd5b82356129ac81612770565b915060208301356129bc81612770565b809150509250929050565b600181811c908216806129db57607f821691505b602082108103612437577f4e487b7100000000000000000000000000000000000000000000000000000000600052602260045260246000fd5b600060208284031215612a2657600080fd5b5051919050565b7f4e487b7100000000000000000000000000000000000000000000000000000000600052601160045260246000fd5b818103818111156104e2576104e2612a2d565b808201808211156104e2576104e2612a2d565b600060208284031215612a9457600080fd5b81516128d081612770565b600060208284031215612ab157600080fd5b815180151581146128d057600080fd5b7f4e487b7100000000000000000000000000000000000000000000000000000000600052602160045260246000fdfea2646970667358221220816c7c3d9612670f8ac63eb8c50a68d23a08284dcb80af0534b33dd1388ff9d664736f6c6343000811003300000000000000000000000000000000000000000000000000000000000000c000000000000000000000000000000000000000000000000000000000000001000000000000000000000000000000000000000000000000000000000000000001000000000000000000000000ee2ebccb7cdb34a8a822b589f9e8427c24351bfc000000000000000000000000cbb8e16d998161adb20465830107ca298995f371000000000000000000000000000000000000000000000000000000000000000100000000000000000000000000000000000000000000000000000000000000084a75696365626f7800000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000034a42580000000000000000000000000000000000000000000000000000000000

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

-----Decoded View---------------
Arg [0] : _name (string): Juicebox
Arg [1] : _symbol (string): JBX
Arg [2] : _projectId (uint256): 1
Arg [3] : _v1TicketBooth (address): 0xee2eBCcB7CDb34a8A822b589F9E8427C24351bfc
Arg [4] : _v2TokenStore (address): 0xCBB8e16d998161AdB20465830107ca298995f371
Arg [5] : _v1ProjectId (uint256): 1

-----Encoded View---------------
10 Constructor Arguments found :
Arg [0] : 00000000000000000000000000000000000000000000000000000000000000c0
Arg [1] : 0000000000000000000000000000000000000000000000000000000000000100
Arg [2] : 0000000000000000000000000000000000000000000000000000000000000001
Arg [3] : 000000000000000000000000ee2ebccb7cdb34a8a822b589f9e8427c24351bfc
Arg [4] : 000000000000000000000000cbb8e16d998161adb20465830107ca298995f371
Arg [5] : 0000000000000000000000000000000000000000000000000000000000000001
Arg [6] : 0000000000000000000000000000000000000000000000000000000000000008
Arg [7] : 4a75696365626f78000000000000000000000000000000000000000000000000
Arg [8] : 0000000000000000000000000000000000000000000000000000000000000003
Arg [9] : 4a42580000000000000000000000000000000000000000000000000000000000