Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity 0.8.6;

import "./HuxleyComics.sol";
import "./interfaces/IGenesisToken.sol";

import "@openzeppelin/contracts/access/AccessControl.sol";
import "@openzeppelin/contracts/security/Pausable.sol";

/**
 * @title HuxleyBurn V3
 *
 */
contract HuxleyBurnV3 is Pausable, AccessControl {
    /// @dev ER721 Huxley Comics Token
    HuxleyComics public huxleyComics;

    /// @dev ERC1156 Genesis Token
    IGenesisToken public genesisToken;

    event GenesisTokenMinted(
        address _sender,
        uint256 _categoryId,
        uint256 _tokenId1,
        uint256 _tokenId2,
        uint256 _tokenId3,
        uint256 _tokenId4,
        uint256 _tokenId5
    );

    /// @dev Constructor - setup HuxleyComics address and genesis token
    constructor(address _huxleyComics, address _genesisToken) {
        _setupRole(DEFAULT_ADMIN_ROLE, msg.sender);

        huxleyComics = HuxleyComics(_huxleyComics);
        genesisToken = IGenesisToken(_genesisToken);

        _pause();
    }

    /**
     * Called to burn 5 tokens and get 1 Genesis Token.
     *
     * User has to own 5 tokens. 1 from Issue 1, 2 from Issue 2 and 2 from Issue 3.
     *
     * @dev It checks if tokens are valid, finds the Genesis Token category,
     * burns 5 tokens, and mints 1 Genesis Token. Before burning, user should
     * have called HuxleyComics.setApprovalForAll()
     *
     * @param tokenId1 Token Id from Issue 1
     * @param tokenId2 Token Id from Issue 2
     * @param tokenId3 Token Id from Issue 2
     * @param tokenId4 Token Id from Issue 3
     * @param tokenId5 Token Id from Issue 3
     */
    function getGenesisToken(
        uint256 tokenId1,
        uint256 tokenId2,
        uint256 tokenId3,
        uint256 tokenId4,
        uint256 tokenId5
    ) external whenNotPaused {
        // Check if msg.sender is owner of tokenId3, tokenId4 and tokenId5.
        isTokenValid(tokenId1, tokenId2, tokenId3, tokenId4, tokenId5);

        // transfer token so it can be burned - setApprovalForAll was called before
        huxleyComics.transferFrom(msg.sender, address(this), tokenId1);
        huxleyComics.transferFrom(msg.sender, address(this), tokenId2);
        huxleyComics.transferFrom(msg.sender, address(this), tokenId3);
        huxleyComics.transferFrom(msg.sender, address(this), tokenId4);
        huxleyComics.transferFrom(msg.sender, address(this), tokenId5);

        // it can be from 10 different categories - 1 to 10
        uint256 categoryId = getTokensCategory(tokenId1, tokenId2, tokenId3, tokenId4, tokenId5);

        // burn 5 tokens
        huxleyComics.burn(tokenId1);
        huxleyComics.burn(tokenId2);
        huxleyComics.burn(tokenId3);
        huxleyComics.burn(tokenId4);
        huxleyComics.burn(tokenId5);

        // mint genesis token
        mintGenesisToken(categoryId);

        emit GenesisTokenMinted(
            msg.sender,
            categoryId,
            tokenId1,
            tokenId2,
            tokenId3,
            tokenId4,
            tokenId5
        );
    }

    /**
     * @dev Check if tokens are from Issue 1, 2 and 3 and if they are a First edition.
     * Since it is known the Token id range, it can be used to verify token Issues
     * @param tokenId1 Token Id from Issue 1
     * @param tokenId2 Token Id from Issue 2
     * @param tokenId3 Token Id from Issue 2
     * @param tokenId4 Token Id from Issue 3
     * @param tokenId5 Token Id from Issue 3
     */
    function isTokenValid(
        uint256 tokenId1,
        uint256 tokenId2,
        uint256 tokenId3,
        uint256 tokenId4,
        uint256 tokenId5
    ) internal pure returns (bool) {
        require(tokenId1 > 101 && tokenId1 <= 10100, "HB: TokenId1 not from Issue 1");
        require(tokenId2 >= 10211 && tokenId2 <= 20210, "HB: TokenId2 not from Issue 2");
        require(tokenId3 >= 10211 && tokenId3 <= 20210, "HB: TokenId3 not from Issue 2");
        require(tokenId4 >= 20321 && tokenId4 <= 30320, "HB: TokenId4 not from Issue 3");
        require(tokenId5 >= 20321 && tokenId5 <= 30320, "HB: TokenId5 not from Issue 3");

        return true;
    }

    /// @dev Mint Genesis token to user. Category is from 1 to 10
    /// @param _categoryId It is from 1 to 10
    function mintGenesisToken(uint256 _categoryId) internal virtual {
        require(_categoryId > 0 && _categoryId <= 10, "HB: Invalid Category");
        genesisToken.mint(msg.sender, _categoryId, "");
    }

    /**
     * @dev Returns genesis token category based on 5 token ids.
     * @param tokenId1 Token Id from Issue 1
     * @param tokenId2 Token Id from Issue 2
     * @param tokenId3 Token Id from Issue 2
     * @param tokenId4 Token Id from Issue 3
     * @param tokenId5 Token Id from Issue 3
     */
    function getTokensCategory(
        uint256 tokenId1,
        uint256 tokenId2,
        uint256 tokenId3,
        uint256 tokenId4,
        uint256 tokenId5
    ) internal pure returns (uint256 categoryId) {
        //To find token serial number it is only necessary to subtract 100 - tokenId - 100
        uint256 lastDigit1 = tokenId1 % 10;
        uint256 lastDigit2 = tokenId2 % 10;
        uint256 lastDigit3 = tokenId3 % 10;
        uint256 lastDigit4 = tokenId4 % 10;
        uint256 lastDigit5 = tokenId5 % 10;

        uint256 sum = lastDigit1 + lastDigit2 + lastDigit3 + lastDigit4 + lastDigit5;
        uint256 lastDigitSum = sum % 10;
        categoryId = lastDigitSum + 1;

        if (categoryId > 10) {
            categoryId = 10;
        }
    }

    /// @dev Pause getGenesisToken(). Only DEFAULT_ADMIN_ROLE can call it.
    function pause() external onlyRole(DEFAULT_ADMIN_ROLE) {
        _pause();
    }

    /// @dev Unpause getGenesisToken(). Only DEFAULT_ADMIN_ROLE can call it.
    function unpause() external onlyRole(DEFAULT_ADMIN_ROLE) {
        _unpause();
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.6;

import "@openzeppelin/contracts/token/ERC721/IERC721.sol";
 
interface IHuxleyComics is IERC721 {
    struct Issue {
        uint256 price;
        uint256 goldSupplyLeft;
        uint256 firstEditionSupplyLeft;
        uint256 holographicSupplyLeft;
        uint256 serialNumberToMintGold;
        uint256 serialNumberToMintFirstEdition;
        uint256 serialNumberToMintHolographic;
        uint256 maxPayableMintBatch;
        string uri;
        bool exist;
    }

    struct Token {
        uint256 serialNumber;
        uint256 issueNumber;
        TokenType tokenType;
    }

    enum TokenType {FirstEdition, Gold, Holographic}

    function safeMint(address _to) external returns (uint256);

    function getCurrentIssue() external returns (uint256 _currentIssue);
    function getCurrentPrice() external returns (uint256 _currentPrice);
    function getCurrentMaxPayableMintBatch() external returns (uint256 _currentMaxPayableMintBatch);

    function createNewIssue(
        uint256 _price,
        uint256 _goldSupply,
        uint256 _firstEditionSupply,
        uint256 _holographicSupply,
        uint256 _startSerialNumberGold,
        uint256 _startSerialNumberFirstEdition,
        uint256 _startSerialNumberHolographic,
        uint256 _maxPaybleMintBatch,
        string memory _uri
    ) external;

    function getIssue(uint256 _issueNumber) external returns (Issue memory _issue);

    function getToken(uint256 _tokenId) external returns (Token memory _token);

    function setTokenDetails(uint256 _tokenId, TokenType _tokenType) external;

    function setBaseURI(uint256 _issueNumber, string memory _uri) external;

    function setCanBurn(bool _canBurn) external;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.6;

interface IGenesisToken {
    function mint(
        address account,
        uint256 category,
        bytes memory data
    ) external;

    function mintBatch(
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) external;

    function burnBatch(
        address account,
        uint256[] memory ids,
        uint256[] memory amounts
    ) external;

    function redeem(address _account, uint256 _category) external;

    function privateMintBatch(
        address _account,
        uint256 _amountToMint,
        uint256 _category,
        bytes memory _data
    ) external;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.6;

import "./interfaces/IHuxleyComics.sol";

import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";

contract HuxleyComics is ERC721Enumerable, IHuxleyComics, ReentrancyGuard, Ownable {
    using Strings for uint256;

    // address of the HuxleyComicsOps contract that can mint tokens
    address public minter;

    // control if tokens can be burned or not. Default is false
    bool public canBurn;

    // Last token id minted
    uint256 public tokenId;

    //Issue being minted
    uint256 private currentIssue;

    //Price of token to be minted
    uint256 private currentPrice;

    //Max amount of tokens that can be mined from current issue
    uint256 private currentMaxPayableMintBatch;

    // mapping of Issues - issue number -> Isssue
    mapping(uint256 => Issue) private issues;

    // mapping of redemptions - tokenId -> true/false
    mapping(uint256 => bool) public redemptions;

    // mapping of Tokens - tokenId -> Token
    mapping(uint256 => Token) private tokens;

    /**
     * @dev Modifier that checks that address is minter. Reverts
     * if sender is not the minter
     */
    modifier onlyMinter() {
        require(msg.sender == minter, "HT: Only minter");
        _;
    }

    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token.
     */
    constructor() ERC721("HUXLEY Comics", "HUXLEY") {}

    /**
     * @dev Safely mints a token. Increments 'tokenId' by 1 and calls super._safeMint()
     *
     * @param to Address that will be the owner of the token
     */
    function safeMint(address to) external override onlyMinter() nonReentrant returns (uint256 _tokenId) {
        tokenId++;
        super._safeMint(to, tokenId);
        return tokenId;
    }

    /**
     * @dev Burns a token. Can only be called by token Owner
     *
     * @param _tokenId Token that will be burned
     */
    function burn(uint256 _tokenId) external {
        require(canBurn, "HT: is not burnable");
        require(ownerOf(_tokenId) == msg.sender, "HT: Not owner");
        super._burn(_tokenId);
    }

    /**
     * @dev It creates a new Issue. Only 'minter' can call this function.
     *
     * @param _price Price for each token to be minted in wei
     * @param _goldSupply Total supply of Gold token
     * @param _firstEditionSupply Total supply of First Edition token
     * @param _holographicSupply Total supply of Holographic token
     * @param _startSerialNumberGold Initial serial number for Gold token
     * @param _startSerialNumberFirstEdition Initial serial number for First Edition token
     * @param _startSerialNumberHolographic Initial serial number for Holographic token
     * @param _maxPayableMintBatch Max amount of tokens that can be minted when calling batch functions (should not be greater than 100 so it won't run out of gas)
     * @param _uri Uri for the tokens of the issue
     */
    function createNewIssue(
        uint256 _price,
        uint256 _goldSupply,
        uint256 _firstEditionSupply,
        uint256 _holographicSupply,
        uint256 _startSerialNumberGold,
        uint256 _startSerialNumberFirstEdition,
        uint256 _startSerialNumberHolographic,
        uint256 _maxPayableMintBatch,
        string memory _uri
    ) external override onlyMinter {
        currentIssue = currentIssue + 1;
        currentPrice = _price;
        currentMaxPayableMintBatch = _maxPayableMintBatch;

        Issue storage issue = issues[currentIssue];

        issue.price = _price;
        issue.goldSupplyLeft = _goldSupply;
        issue.firstEditionSupplyLeft = _firstEditionSupply;
        issue.holographicSupplyLeft = _holographicSupply;
        issue.serialNumberToMintGold = _startSerialNumberGold;
        issue.serialNumberToMintFirstEdition = _startSerialNumberFirstEdition;
        issue.serialNumberToMintHolographic = _startSerialNumberHolographic;
        issue.maxPayableMintBatch = _maxPayableMintBatch;
        issue.uri = _uri;
        issue.exist = true;
    }

    /**
     * @dev Returns whether `issueNumber` exists.
     *
     * Issue can be created via {createNewIssue}.
     *
     */
    function _issueExists(uint256 _issueNumber) internal view virtual returns (bool) {
        return issues[_issueNumber].exist ? true : false;
    }

    /**
     * @dev It sets details for the token. It sets the issue number, serial number and token type.
     *     It also updates supply left of the token.
     *
     * Emits a {IssueCreated} event.
     *
     * @param _tokenId tokenID
     * @param _tokenType tokenType
     */
    function setTokenDetails(uint256 _tokenId, TokenType _tokenType) external override onlyMinter {
        Token storage token = tokens[_tokenId];
        token.issueNumber = currentIssue;

        Issue storage issue = issues[currentIssue];
        // can mint Gold, FirstEdition and Holographic
        if (_tokenType == TokenType.Gold) {
            uint256 goldSupplyLeft = issue.goldSupplyLeft;
            require(goldSupplyLeft > 0, "HT: no gold");

            issue.goldSupplyLeft = goldSupplyLeft - 1;
            uint256 serialNumberGold = issue.serialNumberToMintGold;
            issue.serialNumberToMintGold = serialNumberGold + 1; //next mint

            token.tokenType = TokenType.Gold;
            token.serialNumber = serialNumberGold;
        } else if (_tokenType == TokenType.FirstEdition) {
            uint256 firstEditionSupplyLeft = issue.firstEditionSupplyLeft;
            require(firstEditionSupplyLeft > 0, "HT: no firstEdition");

            issue.firstEditionSupplyLeft = firstEditionSupplyLeft - 1;
            uint256 serialNumberFirstEdition = issue.serialNumberToMintFirstEdition;
            issue.serialNumberToMintFirstEdition = serialNumberFirstEdition + 1; //next mint

            token.tokenType = TokenType.FirstEdition;
            token.serialNumber = serialNumberFirstEdition;
        } else if (_tokenType == TokenType.Holographic) {
            uint256 holographicSupplyLeft = issue.holographicSupplyLeft;
            require(holographicSupplyLeft > 0, "HT: no holographic");

            issue.holographicSupplyLeft = holographicSupplyLeft - 1;
            uint256 serialNumberHolographic = issue.serialNumberToMintHolographic;
            issue.serialNumberToMintHolographic = serialNumberHolographic + 1; //next mint

            token.tokenType = TokenType.Holographic;
            token.serialNumber = serialNumberHolographic;
        } else {
            revert();
        }
    }

    /// @dev Returns URI for the token. Each Issue number has a base uri.
    function tokenURI(uint256 _tokenId) public view virtual override returns (string memory) {
        require(_exists(_tokenId), "UT: invalid token");

        Token memory token = tokens[_tokenId];
        uint256 issueNumber = token.issueNumber;
        require(issueNumber > 0, "HT: invalid issue");

        Issue memory issue = issues[issueNumber];
        string memory baseURI = issue.uri;

        return
            bytes(baseURI).length > 0
                ? string(abi.encodePacked(baseURI, _tokenId.toString()))
                : "";
    }

    /**
     * @dev Sets URI for an Issue.
     *
     * Issue can be created via {createNewIssue} by the Minter.
     *
     */
    function setBaseURI(uint256 _issueNumber, string memory _uri) external override onlyMinter {
        require(_issueExists(_issueNumber), "UT: invalid issue");

        Issue storage issue = issues[_issueNumber];
        issue.uri = _uri;
    }

    /// @dev Returns Issue that can be minted.
    function getCurrentIssue() external view override returns (uint256 _currentIssue) {
        return currentIssue;
    }

    /// @dev Returns Price of token that can be minted.
    function getCurrentPrice() external view override returns (uint256 _currentPrice) {
        return currentPrice;
    }

    /// @dev Returns Max Amount of First Edition tokens an address can pay to mint.
    function getCurrentMaxPayableMintBatch() external view override returns (uint256 _currentMaxaPaybleMintBatch) {
        return currentMaxPayableMintBatch;
    }

    /**
     * @dev Returns details of an Issue: 'price', 'goldSupplyLeft', 'firstEditionSupplyLeft,
     *   'holographicSupplyLeft', 'serialNumberToMintGold', 'serialNumberToMintFirstEdition',
     *   'serialNumberToMintHolographic', 'MaxPayableMintBatch', 'uri' and 'exist'.
     *
     */
    function getIssue(uint256 _issueNumber) external view override returns (Issue memory _issue) {
        return issues[_issueNumber];
    }

    /// @dev Returns token details: 'serialNumber', 'issueNumber' and 'TokenType'
    function getToken(uint256 _tokenId) external view override returns (Token memory _token) {
        return tokens[_tokenId];
    }

    /// @dev User can redeem a copy
    function redeemCopy(uint256 _tokenId) external {
        require(ownerOf(_tokenId) == msg.sender, "HT: Not owner");
        require(redemptions[_tokenId] == false, "HT: already redeemed");

        redemptions[_tokenId] = true;
    }

    // Setup functions
    /// @dev Sets new minter address. Only Owner can call this function.
    function updateMinter(address _minter) external onlyOwner {
        minter = _minter;
    }

    /// @dev Sets if it is allowed to burn tokens. Default is 'false'. Only Minter can call this function.
    function setCanBurn(bool _canBurn) external override onlyMinter {
        canBurn = _canBurn;
    }
    // End setup functions
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) private pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Enumerable is IERC721 {
    /**
     * @dev Returns the total amount of tokens stored by the contract.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns a token ID owned by `owner` at a given `index` of its token list.
     * Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
     */
    function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);

    /**
     * @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
     * Use along with {totalSupply} to enumerate all tokens.
     */
    function tokenByIndex(uint256 index) external view returns (uint256);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../ERC721.sol";
import "./IERC721Enumerable.sol";

/**
 * @dev This implements an optional extension of {ERC721} defined in the EIP that adds
 * enumerability of all the token ids in the contract as well as all token ids owned by each
 * account.
 */
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
    // Mapping from owner to list of owned token IDs
    mapping(address => mapping(uint256 => uint256)) private _ownedTokens;

    // Mapping from token ID to index of the owner tokens list
    mapping(uint256 => uint256) private _ownedTokensIndex;

    // Array with all token ids, used for enumeration
    uint256[] private _allTokens;

    // Mapping from token id to position in the allTokens array
    mapping(uint256 => uint256) private _allTokensIndex;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
        return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
     */
    function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
        require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
        return _ownedTokens[owner][index];
    }

    /**
     * @dev See {IERC721Enumerable-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _allTokens.length;
    }

    /**
     * @dev See {IERC721Enumerable-tokenByIndex}.
     */
    function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
        require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
        return _allTokens[index];
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, ``from``'s `tokenId` will be burned.
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual override {
        super._beforeTokenTransfer(from, to, tokenId);

        if (from == address(0)) {
            _addTokenToAllTokensEnumeration(tokenId);
        } else if (from != to) {
            _removeTokenFromOwnerEnumeration(from, tokenId);
        }
        if (to == address(0)) {
            _removeTokenFromAllTokensEnumeration(tokenId);
        } else if (to != from) {
            _addTokenToOwnerEnumeration(to, tokenId);
        }
    }

    /**
     * @dev Private function to add a token to this extension's ownership-tracking data structures.
     * @param to address representing the new owner of the given token ID
     * @param tokenId uint256 ID of the token to be added to the tokens list of the given address
     */
    function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
        uint256 length = ERC721.balanceOf(to);
        _ownedTokens[to][length] = tokenId;
        _ownedTokensIndex[tokenId] = length;
    }

    /**
     * @dev Private function to add a token to this extension's token tracking data structures.
     * @param tokenId uint256 ID of the token to be added to the tokens list
     */
    function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
        _allTokensIndex[tokenId] = _allTokens.length;
        _allTokens.push(tokenId);
    }

    /**
     * @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
     * while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
     * gas optimizations e.g. when performing a transfer operation (avoiding double writes).
     * This has O(1) time complexity, but alters the order of the _ownedTokens array.
     * @param from address representing the previous owner of the given token ID
     * @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
     */
    function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
        // To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
        // then delete the last slot (swap and pop).

        uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
        uint256 tokenIndex = _ownedTokensIndex[tokenId];

        // When the token to delete is the last token, the swap operation is unnecessary
        if (tokenIndex != lastTokenIndex) {
            uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];

            _ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
            _ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
        }

        // This also deletes the contents at the last position of the array
        delete _ownedTokensIndex[tokenId];
        delete _ownedTokens[from][lastTokenIndex];
    }

    /**
     * @dev Private function to remove a token from this extension's token tracking data structures.
     * This has O(1) time complexity, but alters the order of the _allTokens array.
     * @param tokenId uint256 ID of the token to be removed from the tokens list
     */
    function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
        // To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
        // then delete the last slot (swap and pop).

        uint256 lastTokenIndex = _allTokens.length - 1;
        uint256 tokenIndex = _allTokensIndex[tokenId];

        // When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
        // rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
        // an 'if' statement (like in _removeTokenFromOwnerEnumeration)
        uint256 lastTokenId = _allTokens[lastTokenIndex];

        _allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
        _allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index

        // This also deletes the contents at the last position of the array
        delete _allTokensIndex[tokenId];
        _allTokens.pop();
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";

/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension, but not including the Enumerable extension, which is available separately as
 * {ERC721Enumerable}.
 */
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
    using Address for address;
    using Strings for uint256;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Mapping from token ID to owner address
    mapping(uint256 => address) private _owners;

    // Mapping owner address to token count
    mapping(address => uint256) private _balances;

    // Mapping from token ID to approved address
    mapping(uint256 => address) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC721).interfaceId ||
            interfaceId == type(IERC721Metadata).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        require(owner != address(0), "ERC721: balance query for the zero address");
        return _balances[owner];
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view virtual override returns (address) {
        address owner = _owners[tokenId];
        require(owner != address(0), "ERC721: owner query for nonexistent token");
        return owner;
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");

        string memory baseURI = _baseURI();
        return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, can be overriden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return "";
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public virtual override {
        address owner = ERC721.ownerOf(tokenId);
        require(to != owner, "ERC721: approval to current owner");

        require(
            _msgSender() == owner || isApprovedForAll(owner, _msgSender()),
            "ERC721: approve caller is not owner nor approved for all"
        );

        _approve(to, tokenId);
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view virtual override returns (address) {
        require(_exists(tokenId), "ERC721: approved query for nonexistent token");

        return _tokenApprovals[tokenId];
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        require(operator != _msgSender(), "ERC721: approve to caller");

        _operatorApprovals[_msgSender()][operator] = approved;
        emit ApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");

        _transfer(from, to, tokenId);
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) public virtual override {
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
        _safeTransfer(from, to, tokenId, _data);
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * `_data` is additional data, it has no specified format and it is sent in call to `to`.
     *
     * This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
     * implement alternative mechanisms to perform token transfer, such as signature-based.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeTransfer(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) internal virtual {
        _transfer(from, to, tokenId);
        require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted (`_mint`),
     * and stop existing when they are burned (`_burn`).
     */
    function _exists(uint256 tokenId) internal view virtual returns (bool) {
        return _owners[tokenId] != address(0);
    }

    /**
     * @dev Returns whether `spender` is allowed to manage `tokenId`.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
        require(_exists(tokenId), "ERC721: operator query for nonexistent token");
        address owner = ERC721.ownerOf(tokenId);
        return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
    }

    /**
     * @dev Safely mints `tokenId` and transfers it to `to`.
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(address to, uint256 tokenId) internal virtual {
        _safeMint(to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeMint(
        address to,
        uint256 tokenId,
        bytes memory _data
    ) internal virtual {
        _mint(to, tokenId);
        require(
            _checkOnERC721Received(address(0), to, tokenId, _data),
            "ERC721: transfer to non ERC721Receiver implementer"
        );
    }

    /**
     * @dev Mints `tokenId` and transfers it to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - `to` cannot be the zero address.
     *
     * Emits a {Transfer} event.
     */
    function _mint(address to, uint256 tokenId) internal virtual {
        require(to != address(0), "ERC721: mint to the zero address");
        require(!_exists(tokenId), "ERC721: token already minted");

        _beforeTokenTransfer(address(0), to, tokenId);

        _balances[to] += 1;
        _owners[tokenId] = to;

        emit Transfer(address(0), to, tokenId);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal virtual {
        address owner = ERC721.ownerOf(tokenId);

        _beforeTokenTransfer(owner, address(0), tokenId);

        // Clear approvals
        _approve(address(0), tokenId);

        _balances[owner] -= 1;
        delete _owners[tokenId];

        emit Transfer(owner, address(0), tokenId);
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {
        require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
        require(to != address(0), "ERC721: transfer to the zero address");

        _beforeTokenTransfer(from, to, tokenId);

        // Clear approvals from the previous owner
        _approve(address(0), tokenId);

        _balances[from] -= 1;
        _balances[to] += 1;
        _owners[tokenId] = to;

        emit Transfer(from, to, tokenId);
    }

    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * Emits a {Approval} event.
     */
    function _approve(address to, uint256 tokenId) internal virtual {
        _tokenApprovals[tokenId] = to;
        emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
    }

    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
     * The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param _data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) private returns (bool) {
        if (to.isContract()) {
            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
                return retval == IERC721Receiver(to).onERC721Received.selector;
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    revert("ERC721: transfer to non ERC721Receiver implementer");
                } else {
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        } else {
            return true;
        }
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, ``from``'s `tokenId` will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {}
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor() {
        _paused = false;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        require(!paused(), "Pausable: paused");
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        require(paused(), "Pausable: not paused");
        _;
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _setOwner(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _setOwner(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _setOwner(newOwner);
    }

    function _setOwner(address newOwner) private {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../utils/Context.sol";
import "../utils/Strings.sol";
import "../utils/introspection/ERC165.sol";

/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControl {
    function hasRole(bytes32 role, address account) external view returns (bool);

    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    function grantRole(bytes32 role, address account) external;

    function revokeRole(bytes32 role, address account) external;

    function renounceRole(bytes32 role, address account) external;
}

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it.
 */
abstract contract AccessControl is Context, IAccessControl, ERC165 {
    struct RoleData {
        mapping(address => bool) members;
        bytes32 adminRole;
    }

    mapping(bytes32 => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     *
     * _Available since v3.1._
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with a standardized message including the required role.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{20}) is missing role (0x[0-9a-f]{32})$/
     *
     * _Available since v4.1._
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role, _msgSender());
        _;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view override returns (bool) {
        return _roles[role].members[account];
    }

    /**
     * @dev Revert with a standard message if `account` is missing `role`.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{20}) is missing role (0x[0-9a-f]{32})$/
     */
    function _checkRole(bytes32 role, address account) internal view {
        if (!hasRole(role, account)) {
            revert(
                string(
                    abi.encodePacked(
                        "AccessControl: account ",
                        Strings.toHexString(uint160(account), 20),
                        " is missing role ",
                        Strings.toHexString(uint256(role), 32)
                    )
                )
            );
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view override returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) public virtual override {
        require(account == _msgSender(), "AccessControl: can only renounce roles for self");

        _revokeRole(role, account);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        emit RoleAdminChanged(role, getRoleAdmin(role), adminRole);
        _roles[role].adminRole = adminRole;
    }

    function _grantRole(bytes32 role, address account) private {
        if (!hasRole(role, account)) {
            _roles[role].members[account] = true;
            emit RoleGranted(role, account, _msgSender());
        }
    }

    function _revokeRole(bytes32 role, address account) private {
        if (hasRole(role, account)) {
            _roles[role].members[account] = false;
            emit RoleRevoked(role, account, _msgSender());
        }
    }
}

{
  "remappings": [],
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "evmVersion": "berlin",
  "libraries": {},
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_huxleyComics","type":"address"},{"internalType":"address","name":"_genesisToken","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"_sender","type":"address"},{"indexed":false,"internalType":"uint256","name":"_categoryId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"_tokenId1","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"_tokenId2","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"_tokenId3","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"_tokenId4","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"_tokenId5","type":"uint256"}],"name":"GenesisTokenMinted","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Paused","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Unpaused","type":"event"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"genesisToken","outputs":[{"internalType":"contract IGenesisToken","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId1","type":"uint256"},{"internalType":"uint256","name":"tokenId2","type":"uint256"},{"internalType":"uint256","name":"tokenId3","type":"uint256"},{"internalType":"uint256","name":"tokenId4","type":"uint256"},{"internalType":"uint256","name":"tokenId5","type":"uint256"}],"name":"getGenesisToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"huxleyComics","outputs":[{"internalType":"contract HuxleyComics","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pause","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"paused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"unpause","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

0000000000000000000000009ca8887d13bc4591ae36972702fdf9de2c97957f00000000000000000000000038221a026370360d8c0767c232f39f72f8f3ffde

-----Decoded View---------------
Arg [0] : _huxleyComics (address): 0x9Ca8887D13BC4591Ae36972702fDf9de2c97957f
Arg [1] : _genesisToken (address): 0x38221A026370360d8C0767C232F39F72F8f3fFde

-----Encoded View---------------
2 Constructor Arguments found :
Arg [0] : 0000000000000000000000009ca8887d13bc4591ae36972702fdf9de2c97957f
Arg [1] : 00000000000000000000000038221a026370360d8c0767c232f39f72f8f3ffde