Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity 0.8.14;

import { ConduitInterface } from "../interfaces/ConduitInterface.sol";

import { ConduitItemType } from "./lib/ConduitEnums.sol";

import { TokenTransferrer } from "../lib/TokenTransferrer.sol";

import {
    ConduitTransfer,
    ConduitBatch1155Transfer
} from "./lib/ConduitStructs.sol";

import "./lib/ConduitConstants.sol";

/**
 * @title Conduit
 * @author 0age
 * @notice This contract serves as an originator for "proxied" transfers. Each
 *         conduit is deployed and controlled by a "conduit controller" that can
 *         add and remove "channels" or contracts that can instruct the conduit
 *         to transfer approved ERC20/721/1155 tokens. *IMPORTANT NOTE: each
 *         conduit has an owner that can arbitrarily add or remove channels, and
 *         a malicious or negligent owner can add a channel that allows for any
 *         approved ERC20/721/1155 tokens to be taken immediately — be extremely
 *         cautious with what conduits you give token approvals to!*
 */
contract Conduit is ConduitInterface, TokenTransferrer {
    // Set deployer as an immutable controller that can update channel statuses.
    address private immutable _controller;

    // Track the status of each channel.
    mapping(address => bool) private _channels;

    /**
     * @notice Ensure that the caller is currently registered as an open channel
     *         on the conduit.
     */
    modifier onlyOpenChannel() {
        // Utilize assembly to access channel storage mapping directly.
        assembly {
            // Write the caller to scratch space.
            mstore(ChannelKey_channel_ptr, caller())

            // Write the storage slot for _channels to scratch space.
            mstore(ChannelKey_slot_ptr, _channels.slot)

            // Derive the position in storage of _channels[msg.sender]
            // and check if the stored value is zero.
            if iszero(
                sload(keccak256(ChannelKey_channel_ptr, ChannelKey_length))
            ) {
                // The caller is not an open channel; revert with
                // ChannelClosed(caller). First, set error signature in memory.
                mstore(ChannelClosed_error_ptr, ChannelClosed_error_signature)

                // Next, set the caller as the argument.
                mstore(ChannelClosed_channel_ptr, caller())

                // Finally, revert, returning full custom error with argument.
                revert(ChannelClosed_error_ptr, ChannelClosed_error_length)
            }
        }

        // Continue with function execution.
        _;
    }

    /**
     * @notice In the constructor, set the deployer as the controller.
     */
    constructor() {
        // Set the deployer as the controller.
        _controller = msg.sender;
    }

    /**
     * @notice Execute a sequence of ERC20/721/1155 transfers. Only a caller
     *         with an open channel can call this function. Note that channels
     *         are expected to implement reentrancy protection if desired, and
     *         that cross-channel reentrancy may be possible if the conduit has
     *         multiple open channels at once. Also note that channels are
     *         expected to implement checks against transferring any zero-amount
     *         items if that constraint is desired.
     *
     * @param transfers The ERC20/721/1155 transfers to perform.
     *
     * @return magicValue A magic value indicating that the transfers were
     *                    performed successfully.
     */
    function execute(ConduitTransfer[] calldata transfers)
        external
        override
        onlyOpenChannel
        returns (bytes4 magicValue)
    {
        // Retrieve the total number of transfers and place on the stack.
        uint256 totalStandardTransfers = transfers.length;

        // Iterate over each transfer.
        for (uint256 i = 0; i < totalStandardTransfers; ) {
            // Retrieve the transfer in question and perform the transfer.
            _transfer(transfers[i]);

            // Skip overflow check as for loop is indexed starting at zero.
            unchecked {
                ++i;
            }
        }

        // Return a magic value indicating that the transfers were performed.
        magicValue = this.execute.selector;
    }

    /**
     * @notice Execute a sequence of batch 1155 item transfers. Only a caller
     *         with an open channel can call this function. Note that channels
     *         are expected to implement reentrancy protection if desired, and
     *         that cross-channel reentrancy may be possible if the conduit has
     *         multiple open channels at once. Also note that channels are
     *         expected to implement checks against transferring any zero-amount
     *         items if that constraint is desired.
     *
     * @param batchTransfers The 1155 batch item transfers to perform.
     *
     * @return magicValue A magic value indicating that the item transfers were
     *                    performed successfully.
     */
    function executeBatch1155(
        ConduitBatch1155Transfer[] calldata batchTransfers
    ) external override onlyOpenChannel returns (bytes4 magicValue) {
        // Perform 1155 batch transfers. Note that memory should be considered
        // entirely corrupted from this point forward.
        _performERC1155BatchTransfers(batchTransfers);

        // Return a magic value indicating that the transfers were performed.
        magicValue = this.executeBatch1155.selector;
    }

    /**
     * @notice Execute a sequence of transfers, both single ERC20/721/1155 item
     *         transfers as well as batch 1155 item transfers. Only a caller
     *         with an open channel can call this function. Note that channels
     *         are expected to implement reentrancy protection if desired, and
     *         that cross-channel reentrancy may be possible if the conduit has
     *         multiple open channels at once. Also note that channels are
     *         expected to implement checks against transferring any zero-amount
     *         items if that constraint is desired.
     *
     * @param standardTransfers The ERC20/721/1155 item transfers to perform.
     * @param batchTransfers    The 1155 batch item transfers to perform.
     *
     * @return magicValue A magic value indicating that the item transfers were
     *                    performed successfully.
     */
    function executeWithBatch1155(
        ConduitTransfer[] calldata standardTransfers,
        ConduitBatch1155Transfer[] calldata batchTransfers
    ) external override onlyOpenChannel returns (bytes4 magicValue) {
        // Retrieve the total number of transfers and place on the stack.
        uint256 totalStandardTransfers = standardTransfers.length;

        // Iterate over each standard transfer.
        for (uint256 i = 0; i < totalStandardTransfers; ) {
            // Retrieve the transfer in question and perform the transfer.
            _transfer(standardTransfers[i]);

            // Skip overflow check as for loop is indexed starting at zero.
            unchecked {
                ++i;
            }
        }

        // Perform 1155 batch transfers. Note that memory should be considered
        // entirely corrupted from this point forward aside from the free memory
        // pointer having the default value.
        _performERC1155BatchTransfers(batchTransfers);

        // Return a magic value indicating that the transfers were performed.
        magicValue = this.executeWithBatch1155.selector;
    }

    /**
     * @notice Open or close a given channel. Only callable by the controller.
     *
     * @param channel The channel to open or close.
     * @param isOpen  The status of the channel (either open or closed).
     */
    function updateChannel(address channel, bool isOpen) external override {
        // Ensure that the caller is the controller of this contract.
        if (msg.sender != _controller) {
            revert InvalidController();
        }

        // Ensure that the channel does not already have the indicated status.
        if (_channels[channel] == isOpen) {
            revert ChannelStatusAlreadySet(channel, isOpen);
        }

        // Update the status of the channel.
        _channels[channel] = isOpen;

        // Emit a corresponding event.
        emit ChannelUpdated(channel, isOpen);
    }

    /**
     * @dev Internal function to transfer a given ERC20/721/1155 item. Note that
     *      channels are expected to implement checks against transferring any
     *      zero-amount items if that constraint is desired.
     *
     * @param item The ERC20/721/1155 item to transfer.
     */
    function _transfer(ConduitTransfer calldata item) internal {
        // Determine the transfer method based on the respective item type.
        if (item.itemType == ConduitItemType.ERC20) {
            // Transfer ERC20 token. Note that item.identifier is ignored and
            // therefore ERC20 transfer items are potentially malleable — this
            // check should be performed by the calling channel if a constraint
            // on item malleability is desired.
            _performERC20Transfer(item.token, item.from, item.to, item.amount);
        } else if (item.itemType == ConduitItemType.ERC721) {
            // Ensure that exactly one 721 item is being transferred.
            if (item.amount != 1) {
                revert InvalidERC721TransferAmount();
            }

            // Transfer ERC721 token.
            _performERC721Transfer(
                item.token,
                item.from,
                item.to,
                item.identifier
            );
        } else if (item.itemType == ConduitItemType.ERC1155) {
            // Transfer ERC1155 token.
            _performERC1155Transfer(
                item.token,
                item.from,
                item.to,
                item.identifier,
                item.amount
            );
        } else {
            // Throw with an error.
            revert InvalidItemType();
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.14;

import {
    ConduitTransfer,
    ConduitBatch1155Transfer
} from "../conduit/lib/ConduitStructs.sol";

/**
 * @title ConduitInterface
 * @author 0age
 * @notice ConduitInterface contains all external function interfaces, events,
 *         and errors for conduit contracts.
 */
interface ConduitInterface {
    /**
     * @dev Revert with an error when attempting to execute transfers using a
     *      caller that does not have an open channel.
     */
    error ChannelClosed(address channel);

    /**
     * @dev Revert with an error when attempting to update a channel to the
     *      current status of that channel.
     */
    error ChannelStatusAlreadySet(address channel, bool isOpen);

    /**
     * @dev Revert with an error when attempting to execute a transfer for an
     *      item that does not have an ERC20/721/1155 item type.
     */
    error InvalidItemType();

    /**
     * @dev Revert with an error when attempting to update the status of a
     *      channel from a caller that is not the conduit controller.
     */
    error InvalidController();

    /**
     * @dev Emit an event whenever a channel is opened or closed.
     *
     * @param channel The channel that has been updated.
     * @param open    A boolean indicating whether the conduit is open or not.
     */
    event ChannelUpdated(address indexed channel, bool open);

    /**
     * @notice Execute a sequence of ERC20/721/1155 transfers. Only a caller
     *         with an open channel can call this function.
     *
     * @param transfers The ERC20/721/1155 transfers to perform.
     *
     * @return magicValue A magic value indicating that the transfers were
     *                    performed successfully.
     */
    function execute(ConduitTransfer[] calldata transfers)
        external
        returns (bytes4 magicValue);

    /**
     * @notice Execute a sequence of batch 1155 transfers. Only a caller with an
     *         open channel can call this function.
     *
     * @param batch1155Transfers The 1155 batch transfers to perform.
     *
     * @return magicValue A magic value indicating that the transfers were
     *                    performed successfully.
     */
    function executeBatch1155(
        ConduitBatch1155Transfer[] calldata batch1155Transfers
    ) external returns (bytes4 magicValue);

    /**
     * @notice Execute a sequence of transfers, both single and batch 1155. Only
     *         a caller with an open channel can call this function.
     *
     * @param standardTransfers  The ERC20/721/1155 transfers to perform.
     * @param batch1155Transfers The 1155 batch transfers to perform.
     *
     * @return magicValue A magic value indicating that the transfers were
     *                    performed successfully.
     */
    function executeWithBatch1155(
        ConduitTransfer[] calldata standardTransfers,
        ConduitBatch1155Transfer[] calldata batch1155Transfers
    ) external returns (bytes4 magicValue);

    /**
     * @notice Open or close a given channel. Only callable by the controller.
     *
     * @param channel The channel to open or close.
     * @param isOpen  The status of the channel (either open or closed).
     */
    function updateChannel(address channel, bool isOpen) external;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.14;

enum ConduitItemType {
    NATIVE, // unused
    ERC20,
    ERC721,
    ERC1155
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.14;

import "./TokenTransferrerConstants.sol";

import {
    TokenTransferrerErrors
} from "../interfaces/TokenTransferrerErrors.sol";

import { ConduitBatch1155Transfer } from "../conduit/lib/ConduitStructs.sol";

/**
 * @title TokenTransferrer
 * @author 0age
 * @custom:coauthor d1ll0n
 * @custom:coauthor transmissions11
 * @notice TokenTransferrer is a library for performing optimized ERC20, ERC721,
 *         ERC1155, and batch ERC1155 transfers, used by both Seaport as well as
 *         by conduits deployed by the ConduitController. Use great caution when
 *         considering these functions for use in other codebases, as there are
 *         significant side effects and edge cases that need to be thoroughly
 *         understood and carefully addressed.
 */
contract TokenTransferrer is TokenTransferrerErrors {
    /**
     * @dev Internal function to transfer ERC20 tokens from a given originator
     *      to a given recipient. Sufficient approvals must be set on the
     *      contract performing the transfer.
     *
     * @param token      The ERC20 token to transfer.
     * @param from       The originator of the transfer.
     * @param to         The recipient of the transfer.
     * @param amount     The amount to transfer.
     */
    function _performERC20Transfer(
        address token,
        address from,
        address to,
        uint256 amount
    ) internal {
        // Utilize assembly to perform an optimized ERC20 token transfer.
        assembly {
            // The free memory pointer memory slot will be used when populating
            // call data for the transfer; read the value and restore it later.
            let memPointer := mload(FreeMemoryPointerSlot)

            // Write call data into memory, starting with function selector.
            mstore(ERC20_transferFrom_sig_ptr, ERC20_transferFrom_signature)
            mstore(ERC20_transferFrom_from_ptr, from)
            mstore(ERC20_transferFrom_to_ptr, to)
            mstore(ERC20_transferFrom_amount_ptr, amount)

            // Make call & copy up to 32 bytes of return data to scratch space.
            // Scratch space does not need to be cleared ahead of time, as the
            // subsequent check will ensure that either at least a full word of
            // return data is received (in which case it will be overwritten) or
            // that no data is received (in which case scratch space will be
            // ignored) on a successful call to the given token.
            let callStatus := call(
                gas(),
                token,
                0,
                ERC20_transferFrom_sig_ptr,
                ERC20_transferFrom_length,
                0,
                OneWord
            )

            // Determine whether transfer was successful using status & result.
            let success := and(
                // Set success to whether the call reverted, if not check it
                // either returned exactly 1 (can't just be non-zero data), or
                // had no return data.
                or(
                    and(eq(mload(0), 1), gt(returndatasize(), 31)),
                    iszero(returndatasize())
                ),
                callStatus
            )

            // Handle cases where either the transfer failed or no data was
            // returned. Group these, as most transfers will succeed with data.
            // Equivalent to `or(iszero(success), iszero(returndatasize()))`
            // but after it's inverted for JUMPI this expression is cheaper.
            if iszero(and(success, iszero(iszero(returndatasize())))) {
                // If the token has no code or the transfer failed: Equivalent
                // to `or(iszero(success), iszero(extcodesize(token)))` but
                // after it's inverted for JUMPI this expression is cheaper.
                if iszero(and(iszero(iszero(extcodesize(token))), success)) {
                    // If the transfer failed:
                    if iszero(success) {
                        // If it was due to a revert:
                        if iszero(callStatus) {
                            // If it returned a message, bubble it up as long as
                            // sufficient gas remains to do so:
                            if returndatasize() {
                                // Ensure that sufficient gas is available to
                                // copy returndata while expanding memory where
                                // necessary. Start by computing the word size
                                // of returndata and allocated memory. Round up
                                // to the nearest full word.
                                let returnDataWords := div(
                                    add(returndatasize(), AlmostOneWord),
                                    OneWord
                                )

                                // Note: use the free memory pointer in place of
                                // msize() to work around a Yul warning that
                                // prevents accessing msize directly when the IR
                                // pipeline is activated.
                                let msizeWords := div(memPointer, OneWord)

                                // Next, compute the cost of the returndatacopy.
                                let cost := mul(CostPerWord, returnDataWords)

                                // Then, compute cost of new memory allocation.
                                if gt(returnDataWords, msizeWords) {
                                    cost := add(
                                        cost,
                                        add(
                                            mul(
                                                sub(
                                                    returnDataWords,
                                                    msizeWords
                                                ),
                                                CostPerWord
                                            ),
                                            div(
                                                sub(
                                                    mul(
                                                        returnDataWords,
                                                        returnDataWords
                                                    ),
                                                    mul(msizeWords, msizeWords)
                                                ),
                                                MemoryExpansionCoefficient
                                            )
                                        )
                                    )
                                }

                                // Finally, add a small constant and compare to
                                // gas remaining; bubble up the revert data if
                                // enough gas is still available.
                                if lt(add(cost, ExtraGasBuffer), gas()) {
                                    // Copy returndata to memory; overwrite
                                    // existing memory.
                                    returndatacopy(0, 0, returndatasize())

                                    // Revert, specifying memory region with
                                    // copied returndata.
                                    revert(0, returndatasize())
                                }
                            }

                            // Otherwise revert with a generic error message.
                            mstore(
                                TokenTransferGenericFailure_error_sig_ptr,
                                TokenTransferGenericFailure_error_signature
                            )
                            mstore(
                                TokenTransferGenericFailure_error_token_ptr,
                                token
                            )
                            mstore(
                                TokenTransferGenericFailure_error_from_ptr,
                                from
                            )
                            mstore(TokenTransferGenericFailure_error_to_ptr, to)
                            mstore(TokenTransferGenericFailure_error_id_ptr, 0)
                            mstore(
                                TokenTransferGenericFailure_error_amount_ptr,
                                amount
                            )
                            revert(
                                TokenTransferGenericFailure_error_sig_ptr,
                                TokenTransferGenericFailure_error_length
                            )
                        }

                        // Otherwise revert with a message about the token
                        // returning false or non-compliant return values.
                        mstore(
                            BadReturnValueFromERC20OnTransfer_error_sig_ptr,
                            BadReturnValueFromERC20OnTransfer_error_signature
                        )
                        mstore(
                            BadReturnValueFromERC20OnTransfer_error_token_ptr,
                            token
                        )
                        mstore(
                            BadReturnValueFromERC20OnTransfer_error_from_ptr,
                            from
                        )
                        mstore(
                            BadReturnValueFromERC20OnTransfer_error_to_ptr,
                            to
                        )
                        mstore(
                            BadReturnValueFromERC20OnTransfer_error_amount_ptr,
                            amount
                        )
                        revert(
                            BadReturnValueFromERC20OnTransfer_error_sig_ptr,
                            BadReturnValueFromERC20OnTransfer_error_length
                        )
                    }

                    // Otherwise, revert with error about token not having code:
                    mstore(NoContract_error_sig_ptr, NoContract_error_signature)
                    mstore(NoContract_error_token_ptr, token)
                    revert(NoContract_error_sig_ptr, NoContract_error_length)
                }

                // Otherwise, the token just returned no data despite the call
                // having succeeded; no need to optimize for this as it's not
                // technically ERC20 compliant.
            }

            // Restore the original free memory pointer.
            mstore(FreeMemoryPointerSlot, memPointer)

            // Restore the zero slot to zero.
            mstore(ZeroSlot, 0)
        }
    }

    /**
     * @dev Internal function to transfer an ERC721 token from a given
     *      originator to a given recipient. Sufficient approvals must be set on
     *      the contract performing the transfer. Note that this function does
     *      not check whether the receiver can accept the ERC721 token (i.e. it
     *      does not use `safeTransferFrom`).
     *
     * @param token      The ERC721 token to transfer.
     * @param from       The originator of the transfer.
     * @param to         The recipient of the transfer.
     * @param identifier The tokenId to transfer.
     */
    function _performERC721Transfer(
        address token,
        address from,
        address to,
        uint256 identifier
    ) internal {
        // Utilize assembly to perform an optimized ERC721 token transfer.
        assembly {
            // If the token has no code, revert.
            if iszero(extcodesize(token)) {
                mstore(NoContract_error_sig_ptr, NoContract_error_signature)
                mstore(NoContract_error_token_ptr, token)
                revert(NoContract_error_sig_ptr, NoContract_error_length)
            }

            // The free memory pointer memory slot will be used when populating
            // call data for the transfer; read the value and restore it later.
            let memPointer := mload(FreeMemoryPointerSlot)

            // Write call data to memory starting with function selector.
            mstore(ERC721_transferFrom_sig_ptr, ERC721_transferFrom_signature)
            mstore(ERC721_transferFrom_from_ptr, from)
            mstore(ERC721_transferFrom_to_ptr, to)
            mstore(ERC721_transferFrom_id_ptr, identifier)

            // Perform the call, ignoring return data.
            let success := call(
                gas(),
                token,
                0,
                ERC721_transferFrom_sig_ptr,
                ERC721_transferFrom_length,
                0,
                0
            )

            // If the transfer reverted:
            if iszero(success) {
                // If it returned a message, bubble it up as long as sufficient
                // gas remains to do so:
                if returndatasize() {
                    // Ensure that sufficient gas is available to copy
                    // returndata while expanding memory where necessary. Start
                    // by computing word size of returndata & allocated memory.
                    // Round up to the nearest full word.
                    let returnDataWords := div(
                        add(returndatasize(), AlmostOneWord),
                        OneWord
                    )

                    // Note: use the free memory pointer in place of msize() to
                    // work around a Yul warning that prevents accessing msize
                    // directly when the IR pipeline is activated.
                    let msizeWords := div(memPointer, OneWord)

                    // Next, compute the cost of the returndatacopy.
                    let cost := mul(CostPerWord, returnDataWords)

                    // Then, compute cost of new memory allocation.
                    if gt(returnDataWords, msizeWords) {
                        cost := add(
                            cost,
                            add(
                                mul(
                                    sub(returnDataWords, msizeWords),
                                    CostPerWord
                                ),
                                div(
                                    sub(
                                        mul(returnDataWords, returnDataWords),
                                        mul(msizeWords, msizeWords)
                                    ),
                                    MemoryExpansionCoefficient
                                )
                            )
                        )
                    }

                    // Finally, add a small constant and compare to gas
                    // remaining; bubble up the revert data if enough gas is
                    // still available.
                    if lt(add(cost, ExtraGasBuffer), gas()) {
                        // Copy returndata to memory; overwrite existing memory.
                        returndatacopy(0, 0, returndatasize())

                        // Revert, giving memory region with copied returndata.
                        revert(0, returndatasize())
                    }
                }

                // Otherwise revert with a generic error message.
                mstore(
                    TokenTransferGenericFailure_error_sig_ptr,
                    TokenTransferGenericFailure_error_signature
                )
                mstore(TokenTransferGenericFailure_error_token_ptr, token)
                mstore(TokenTransferGenericFailure_error_from_ptr, from)
                mstore(TokenTransferGenericFailure_error_to_ptr, to)
                mstore(TokenTransferGenericFailure_error_id_ptr, identifier)
                mstore(TokenTransferGenericFailure_error_amount_ptr, 1)
                revert(
                    TokenTransferGenericFailure_error_sig_ptr,
                    TokenTransferGenericFailure_error_length
                )
            }

            // Restore the original free memory pointer.
            mstore(FreeMemoryPointerSlot, memPointer)

            // Restore the zero slot to zero.
            mstore(ZeroSlot, 0)
        }
    }

    /**
     * @dev Internal function to transfer ERC1155 tokens from a given
     *      originator to a given recipient. Sufficient approvals must be set on
     *      the contract performing the transfer and contract recipients must
     *      implement the ERC1155TokenReceiver interface to indicate that they
     *      are willing to accept the transfer.
     *
     * @param token      The ERC1155 token to transfer.
     * @param from       The originator of the transfer.
     * @param to         The recipient of the transfer.
     * @param identifier The id to transfer.
     * @param amount     The amount to transfer.
     */
    function _performERC1155Transfer(
        address token,
        address from,
        address to,
        uint256 identifier,
        uint256 amount
    ) internal {
        // Utilize assembly to perform an optimized ERC1155 token transfer.
        assembly {
            // If the token has no code, revert.
            if iszero(extcodesize(token)) {
                mstore(NoContract_error_sig_ptr, NoContract_error_signature)
                mstore(NoContract_error_token_ptr, token)
                revert(NoContract_error_sig_ptr, NoContract_error_length)
            }

            // The following memory slots will be used when populating call data
            // for the transfer; read the values and restore them later.
            let memPointer := mload(FreeMemoryPointerSlot)
            let slot0x80 := mload(Slot0x80)
            let slot0xA0 := mload(Slot0xA0)
            let slot0xC0 := mload(Slot0xC0)

            // Write call data into memory, beginning with function selector.
            mstore(
                ERC1155_safeTransferFrom_sig_ptr,
                ERC1155_safeTransferFrom_signature
            )
            mstore(ERC1155_safeTransferFrom_from_ptr, from)
            mstore(ERC1155_safeTransferFrom_to_ptr, to)
            mstore(ERC1155_safeTransferFrom_id_ptr, identifier)
            mstore(ERC1155_safeTransferFrom_amount_ptr, amount)
            mstore(
                ERC1155_safeTransferFrom_data_offset_ptr,
                ERC1155_safeTransferFrom_data_length_offset
            )
            mstore(ERC1155_safeTransferFrom_data_length_ptr, 0)

            // Perform the call, ignoring return data.
            let success := call(
                gas(),
                token,
                0,
                ERC1155_safeTransferFrom_sig_ptr,
                ERC1155_safeTransferFrom_length,
                0,
                0
            )

            // If the transfer reverted:
            if iszero(success) {
                // If it returned a message, bubble it up as long as sufficient
                // gas remains to do so:
                if returndatasize() {
                    // Ensure that sufficient gas is available to copy
                    // returndata while expanding memory where necessary. Start
                    // by computing word size of returndata & allocated memory.
                    // Round up to the nearest full word.
                    let returnDataWords := div(
                        add(returndatasize(), AlmostOneWord),
                        OneWord
                    )

                    // Note: use the free memory pointer in place of msize() to
                    // work around a Yul warning that prevents accessing msize
                    // directly when the IR pipeline is activated.
                    let msizeWords := div(memPointer, OneWord)

                    // Next, compute the cost of the returndatacopy.
                    let cost := mul(CostPerWord, returnDataWords)

                    // Then, compute cost of new memory allocation.
                    if gt(returnDataWords, msizeWords) {
                        cost := add(
                            cost,
                            add(
                                mul(
                                    sub(returnDataWords, msizeWords),
                                    CostPerWord
                                ),
                                div(
                                    sub(
                                        mul(returnDataWords, returnDataWords),
                                        mul(msizeWords, msizeWords)
                                    ),
                                    MemoryExpansionCoefficient
                                )
                            )
                        )
                    }

                    // Finally, add a small constant and compare to gas
                    // remaining; bubble up the revert data if enough gas is
                    // still available.
                    if lt(add(cost, ExtraGasBuffer), gas()) {
                        // Copy returndata to memory; overwrite existing memory.
                        returndatacopy(0, 0, returndatasize())

                        // Revert, giving memory region with copied returndata.
                        revert(0, returndatasize())
                    }
                }

                // Otherwise revert with a generic error message.
                mstore(
                    TokenTransferGenericFailure_error_sig_ptr,
                    TokenTransferGenericFailure_error_signature
                )
                mstore(TokenTransferGenericFailure_error_token_ptr, token)
                mstore(TokenTransferGenericFailure_error_from_ptr, from)
                mstore(TokenTransferGenericFailure_error_to_ptr, to)
                mstore(TokenTransferGenericFailure_error_id_ptr, identifier)
                mstore(TokenTransferGenericFailure_error_amount_ptr, amount)
                revert(
                    TokenTransferGenericFailure_error_sig_ptr,
                    TokenTransferGenericFailure_error_length
                )
            }

            mstore(Slot0x80, slot0x80) // Restore slot 0x80.
            mstore(Slot0xA0, slot0xA0) // Restore slot 0xA0.
            mstore(Slot0xC0, slot0xC0) // Restore slot 0xC0.

            // Restore the original free memory pointer.
            mstore(FreeMemoryPointerSlot, memPointer)

            // Restore the zero slot to zero.
            mstore(ZeroSlot, 0)
        }
    }

    /**
     * @dev Internal function to transfer ERC1155 tokens from a given
     *      originator to a given recipient. Sufficient approvals must be set on
     *      the contract performing the transfer and contract recipients must
     *      implement the ERC1155TokenReceiver interface to indicate that they
     *      are willing to accept the transfer. NOTE: this function is not
     *      memory-safe; it will overwrite existing memory, restore the free
     *      memory pointer to the default value, and overwrite the zero slot.
     *      This function should only be called once memory is no longer
     *      required and when uninitialized arrays are not utilized, and memory
     *      should be considered fully corrupted (aside from the existence of a
     *      default-value free memory pointer) after calling this function.
     *
     * @param batchTransfers The group of 1155 batch transfers to perform.
     */
    function _performERC1155BatchTransfers(
        ConduitBatch1155Transfer[] calldata batchTransfers
    ) internal {
        // Utilize assembly to perform optimized batch 1155 transfers.
        assembly {
            let len := batchTransfers.length
            // Pointer to first head in the array, which is offset to the struct
            // at each index. This gets incremented after each loop to avoid
            // multiplying by 32 to get the offset for each element.
            let nextElementHeadPtr := batchTransfers.offset

            // Pointer to beginning of the head of the array. This is the
            // reference position each offset references. It's held static to
            // let each loop calculate the data position for an element.
            let arrayHeadPtr := nextElementHeadPtr

            // Write the function selector, which will be reused for each call:
            // safeBatchTransferFrom(address,address,uint256[],uint256[],bytes)
            mstore(
                ConduitBatch1155Transfer_from_offset,
                ERC1155_safeBatchTransferFrom_signature
            )

            // Iterate over each batch transfer.
            for {
                let i := 0
            } lt(i, len) {
                i := add(i, 1)
            } {
                // Read the offset to the beginning of the element and add
                // it to pointer to the beginning of the array head to get
                // the absolute position of the element in calldata.
                let elementPtr := add(
                    arrayHeadPtr,
                    calldataload(nextElementHeadPtr)
                )

                // Retrieve the token from calldata.
                let token := calldataload(elementPtr)

                // If the token has no code, revert.
                if iszero(extcodesize(token)) {
                    mstore(NoContract_error_sig_ptr, NoContract_error_signature)
                    mstore(NoContract_error_token_ptr, token)
                    revert(NoContract_error_sig_ptr, NoContract_error_length)
                }

                // Get the total number of supplied ids.
                let idsLength := calldataload(
                    add(elementPtr, ConduitBatch1155Transfer_ids_length_offset)
                )

                // Determine the expected offset for the amounts array.
                let expectedAmountsOffset := add(
                    ConduitBatch1155Transfer_amounts_length_baseOffset,
                    mul(idsLength, OneWord)
                )

                // Validate struct encoding.
                let invalidEncoding := iszero(
                    and(
                        // ids.length == amounts.length
                        eq(
                            idsLength,
                            calldataload(add(elementPtr, expectedAmountsOffset))
                        ),
                        and(
                            // ids_offset == 0xa0
                            eq(
                                calldataload(
                                    add(
                                        elementPtr,
                                        ConduitBatch1155Transfer_ids_head_offset
                                    )
                                ),
                                ConduitBatch1155Transfer_ids_length_offset
                            ),
                            // amounts_offset == 0xc0 + ids.length*32
                            eq(
                                calldataload(
                                    add(
                                        elementPtr,
                                        ConduitBatchTransfer_amounts_head_offset
                                    )
                                ),
                                expectedAmountsOffset
                            )
                        )
                    )
                )

                // Revert with an error if the encoding is not valid.
                if invalidEncoding {
                    mstore(
                        Invalid1155BatchTransferEncoding_ptr,
                        Invalid1155BatchTransferEncoding_selector
                    )
                    revert(
                        Invalid1155BatchTransferEncoding_ptr,
                        Invalid1155BatchTransferEncoding_length
                    )
                }

                // Update the offset position for the next loop
                nextElementHeadPtr := add(nextElementHeadPtr, OneWord)

                // Copy the first section of calldata (before dynamic values).
                calldatacopy(
                    BatchTransfer1155Params_ptr,
                    add(elementPtr, ConduitBatch1155Transfer_from_offset),
                    ConduitBatch1155Transfer_usable_head_size
                )

                // Determine size of calldata required for ids and amounts. Note
                // that the size includes both lengths as well as the data.
                let idsAndAmountsSize := add(TwoWords, mul(idsLength, TwoWords))

                // Update the offset for the data array in memory.
                mstore(
                    BatchTransfer1155Params_data_head_ptr,
                    add(
                        BatchTransfer1155Params_ids_length_offset,
                        idsAndAmountsSize
                    )
                )

                // Set the length of the data array in memory to zero.
                mstore(
                    add(
                        BatchTransfer1155Params_data_length_basePtr,
                        idsAndAmountsSize
                    ),
                    0
                )

                // Determine the total calldata size for the call to transfer.
                let transferDataSize := add(
                    BatchTransfer1155Params_calldata_baseSize,
                    idsAndAmountsSize
                )

                // Copy second section of calldata (including dynamic values).
                calldatacopy(
                    BatchTransfer1155Params_ids_length_ptr,
                    add(elementPtr, ConduitBatch1155Transfer_ids_length_offset),
                    idsAndAmountsSize
                )

                // Perform the call to transfer 1155 tokens.
                let success := call(
                    gas(),
                    token,
                    0,
                    ConduitBatch1155Transfer_from_offset, // Data portion start.
                    transferDataSize, // Location of the length of callData.
                    0,
                    0
                )

                // If the transfer reverted:
                if iszero(success) {
                    // If it returned a message, bubble it up as long as
                    // sufficient gas remains to do so:
                    if returndatasize() {
                        // Ensure that sufficient gas is available to copy
                        // returndata while expanding memory where necessary.
                        // Start by computing word size of returndata and
                        // allocated memory. Round up to the nearest full word.
                        let returnDataWords := div(
                            add(returndatasize(), AlmostOneWord),
                            OneWord
                        )

                        // Note: use transferDataSize in place of msize() to
                        // work around a Yul warning that prevents accessing
                        // msize directly when the IR pipeline is activated.
                        // The free memory pointer is not used here because
                        // this function does almost all memory management
                        // manually and does not update it, and transferDataSize
                        // should be the largest memory value used (unless a
                        // previous batch was larger).
                        let msizeWords := div(transferDataSize, OneWord)

                        // Next, compute the cost of the returndatacopy.
                        let cost := mul(CostPerWord, returnDataWords)

                        // Then, compute cost of new memory allocation.
                        if gt(returnDataWords, msizeWords) {
                            cost := add(
                                cost,
                                add(
                                    mul(
                                        sub(returnDataWords, msizeWords),
                                        CostPerWord
                                    ),
                                    div(
                                        sub(
                                            mul(
                                                returnDataWords,
                                                returnDataWords
                                            ),
                                            mul(msizeWords, msizeWords)
                                        ),
                                        MemoryExpansionCoefficient
                                    )
                                )
                            )
                        }

                        // Finally, add a small constant and compare to gas
                        // remaining; bubble up the revert data if enough gas is
                        // still available.
                        if lt(add(cost, ExtraGasBuffer), gas()) {
                            // Copy returndata to memory; overwrite existing.
                            returndatacopy(0, 0, returndatasize())

                            // Revert with memory region containing returndata.
                            revert(0, returndatasize())
                        }
                    }

                    // Set the error signature.
                    mstore(
                        0,
                        ERC1155BatchTransferGenericFailure_error_signature
                    )

                    // Write the token.
                    mstore(ERC1155BatchTransferGenericFailure_token_ptr, token)

                    // Increase the offset to ids by 32.
                    mstore(
                        BatchTransfer1155Params_ids_head_ptr,
                        ERC1155BatchTransferGenericFailure_ids_offset
                    )

                    // Increase the offset to amounts by 32.
                    mstore(
                        BatchTransfer1155Params_amounts_head_ptr,
                        add(
                            OneWord,
                            mload(BatchTransfer1155Params_amounts_head_ptr)
                        )
                    )

                    // Return modified region. The total size stays the same as
                    // `token` uses the same number of bytes as `data.length`.
                    revert(0, transferDataSize)
                }
            }

            // Reset the free memory pointer to the default value; memory must
            // be assumed to be dirtied and not reused from this point forward.
            // Also note that the zero slot is not reset to zero, meaning empty
            // arrays cannot be safely created or utilized until it is restored.
            mstore(FreeMemoryPointerSlot, DefaultFreeMemoryPointer)
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.14;

import { ConduitItemType } from "./ConduitEnums.sol";

struct ConduitTransfer {
    ConduitItemType itemType;
    address token;
    address from;
    address to;
    uint256 identifier;
    uint256 amount;
}

struct ConduitBatch1155Transfer {
    address token;
    address from;
    address to;
    uint256[] ids;
    uint256[] amounts;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.14;

// error ChannelClosed(address channel)
uint256 constant ChannelClosed_error_signature = (
    0x93daadf200000000000000000000000000000000000000000000000000000000
);
uint256 constant ChannelClosed_error_ptr = 0x00;
uint256 constant ChannelClosed_channel_ptr = 0x4;
uint256 constant ChannelClosed_error_length = 0x24;

// For the mapping:
// mapping(address => bool) channels
// The position in storage for a particular account is:
// keccak256(abi.encode(account, channels.slot))
uint256 constant ChannelKey_channel_ptr = 0x00;
uint256 constant ChannelKey_slot_ptr = 0x20;
uint256 constant ChannelKey_length = 0x40;

// SPDX-License-Identifier: MIT
pragma solidity 0.8.14;

/*
 * -------------------------- Disambiguation & Other Notes ---------------------
 *    - The term "head" is used as it is in the documentation for ABI encoding,
 *      but only in reference to dynamic types, i.e. it always refers to the
 *      offset or pointer to the body of a dynamic type. In calldata, the head
 *      is always an offset (relative to the parent object), while in memory,
 *      the head is always the pointer to the body. More information found here:
 *      https://docs.soliditylang.org/en/v0.8.14/abi-spec.html#argument-encoding
 *        - Note that the length of an array is separate from and precedes the
 *          head of the array.
 *
 *    - The term "body" is used in place of the term "head" used in the ABI
 *      documentation. It refers to the start of the data for a dynamic type,
 *      e.g. the first word of a struct or the first word of the first element
 *      in an array.
 *
 *    - The term "pointer" is used to describe the absolute position of a value
 *      and never an offset relative to another value.
 *        - The suffix "_ptr" refers to a memory pointer.
 *        - The suffix "_cdPtr" refers to a calldata pointer.
 *
 *    - The term "offset" is used to describe the position of a value relative
 *      to some parent value. For example, OrderParameters_conduit_offset is the
 *      offset to the "conduit" value in the OrderParameters struct relative to
 *      the start of the body.
 *        - Note: Offsets are used to derive pointers.
 *
 *    - Some structs have pointers defined for all of their fields in this file.
 *      Lines which are commented out are fields that are not used in the
 *      codebase but have been left in for readability.
 */

uint256 constant AlmostOneWord = 0x1f;
uint256 constant OneWord = 0x20;
uint256 constant TwoWords = 0x40;
uint256 constant ThreeWords = 0x60;

uint256 constant FreeMemoryPointerSlot = 0x40;
uint256 constant ZeroSlot = 0x60;
uint256 constant DefaultFreeMemoryPointer = 0x80;

uint256 constant Slot0x80 = 0x80;
uint256 constant Slot0xA0 = 0xa0;
uint256 constant Slot0xC0 = 0xc0;

// abi.encodeWithSignature("transferFrom(address,address,uint256)")
uint256 constant ERC20_transferFrom_signature = (
    0x23b872dd00000000000000000000000000000000000000000000000000000000
);
uint256 constant ERC20_transferFrom_sig_ptr = 0x0;
uint256 constant ERC20_transferFrom_from_ptr = 0x04;
uint256 constant ERC20_transferFrom_to_ptr = 0x24;
uint256 constant ERC20_transferFrom_amount_ptr = 0x44;
uint256 constant ERC20_transferFrom_length = 0x64; // 4 + 32 * 3 == 100

// abi.encodeWithSignature(
//     "safeTransferFrom(address,address,uint256,uint256,bytes)"
// )
uint256 constant ERC1155_safeTransferFrom_signature = (
    0xf242432a00000000000000000000000000000000000000000000000000000000
);
uint256 constant ERC1155_safeTransferFrom_sig_ptr = 0x0;
uint256 constant ERC1155_safeTransferFrom_from_ptr = 0x04;
uint256 constant ERC1155_safeTransferFrom_to_ptr = 0x24;
uint256 constant ERC1155_safeTransferFrom_id_ptr = 0x44;
uint256 constant ERC1155_safeTransferFrom_amount_ptr = 0x64;
uint256 constant ERC1155_safeTransferFrom_data_offset_ptr = 0x84;
uint256 constant ERC1155_safeTransferFrom_data_length_ptr = 0xa4;
uint256 constant ERC1155_safeTransferFrom_length = 0xc4; // 4 + 32 * 6 == 196
uint256 constant ERC1155_safeTransferFrom_data_length_offset = 0xa0;

// abi.encodeWithSignature(
//     "safeBatchTransferFrom(address,address,uint256[],uint256[],bytes)"
// )
uint256 constant ERC1155_safeBatchTransferFrom_signature = (
    0x2eb2c2d600000000000000000000000000000000000000000000000000000000
);

bytes4 constant ERC1155_safeBatchTransferFrom_selector = bytes4(
    bytes32(ERC1155_safeBatchTransferFrom_signature)
);

uint256 constant ERC721_transferFrom_signature = ERC20_transferFrom_signature;
uint256 constant ERC721_transferFrom_sig_ptr = 0x0;
uint256 constant ERC721_transferFrom_from_ptr = 0x04;
uint256 constant ERC721_transferFrom_to_ptr = 0x24;
uint256 constant ERC721_transferFrom_id_ptr = 0x44;
uint256 constant ERC721_transferFrom_length = 0x64; // 4 + 32 * 3 == 100

// abi.encodeWithSignature("NoContract(address)")
uint256 constant NoContract_error_signature = (
    0x5f15d67200000000000000000000000000000000000000000000000000000000
);
uint256 constant NoContract_error_sig_ptr = 0x0;
uint256 constant NoContract_error_token_ptr = 0x4;
uint256 constant NoContract_error_length = 0x24; // 4 + 32 == 36

// abi.encodeWithSignature(
//     "TokenTransferGenericFailure(address,address,address,uint256,uint256)"
// )
uint256 constant TokenTransferGenericFailure_error_signature = (
    0xf486bc8700000000000000000000000000000000000000000000000000000000
);
uint256 constant TokenTransferGenericFailure_error_sig_ptr = 0x0;
uint256 constant TokenTransferGenericFailure_error_token_ptr = 0x4;
uint256 constant TokenTransferGenericFailure_error_from_ptr = 0x24;
uint256 constant TokenTransferGenericFailure_error_to_ptr = 0x44;
uint256 constant TokenTransferGenericFailure_error_id_ptr = 0x64;
uint256 constant TokenTransferGenericFailure_error_amount_ptr = 0x84;

// 4 + 32 * 5 == 164
uint256 constant TokenTransferGenericFailure_error_length = 0xa4;

// abi.encodeWithSignature(
//     "BadReturnValueFromERC20OnTransfer(address,address,address,uint256)"
// )
uint256 constant BadReturnValueFromERC20OnTransfer_error_signature = (
    0x9889192300000000000000000000000000000000000000000000000000000000
);
uint256 constant BadReturnValueFromERC20OnTransfer_error_sig_ptr = 0x0;
uint256 constant BadReturnValueFromERC20OnTransfer_error_token_ptr = 0x4;
uint256 constant BadReturnValueFromERC20OnTransfer_error_from_ptr = 0x24;
uint256 constant BadReturnValueFromERC20OnTransfer_error_to_ptr = 0x44;
uint256 constant BadReturnValueFromERC20OnTransfer_error_amount_ptr = 0x64;

// 4 + 32 * 4 == 132
uint256 constant BadReturnValueFromERC20OnTransfer_error_length = 0x84;

uint256 constant ExtraGasBuffer = 0x20;
uint256 constant CostPerWord = 3;
uint256 constant MemoryExpansionCoefficient = 0x200;

// Values are offset by 32 bytes in order to write the token to the beginning
// in the event of a revert
uint256 constant BatchTransfer1155Params_ptr = 0x24;
uint256 constant BatchTransfer1155Params_ids_head_ptr = 0x64;
uint256 constant BatchTransfer1155Params_amounts_head_ptr = 0x84;
uint256 constant BatchTransfer1155Params_data_head_ptr = 0xa4;
uint256 constant BatchTransfer1155Params_data_length_basePtr = 0xc4;
uint256 constant BatchTransfer1155Params_calldata_baseSize = 0xc4;

uint256 constant BatchTransfer1155Params_ids_length_ptr = 0xc4;

uint256 constant BatchTransfer1155Params_ids_length_offset = 0xa0;
uint256 constant BatchTransfer1155Params_amounts_length_baseOffset = 0xc0;
uint256 constant BatchTransfer1155Params_data_length_baseOffset = 0xe0;

uint256 constant ConduitBatch1155Transfer_usable_head_size = 0x80;

uint256 constant ConduitBatch1155Transfer_from_offset = 0x20;
uint256 constant ConduitBatch1155Transfer_ids_head_offset = 0x60;
uint256 constant ConduitBatch1155Transfer_amounts_head_offset = 0x80;
uint256 constant ConduitBatch1155Transfer_ids_length_offset = 0xa0;
uint256 constant ConduitBatch1155Transfer_amounts_length_baseOffset = 0xc0;
uint256 constant ConduitBatch1155Transfer_calldata_baseSize = 0xc0;

// Note: abbreviated version of above constant to adhere to line length limit.
uint256 constant ConduitBatchTransfer_amounts_head_offset = 0x80;

uint256 constant Invalid1155BatchTransferEncoding_ptr = 0x00;
uint256 constant Invalid1155BatchTransferEncoding_length = 0x04;
uint256 constant Invalid1155BatchTransferEncoding_selector = (
    0xeba2084c00000000000000000000000000000000000000000000000000000000
);

uint256 constant ERC1155BatchTransferGenericFailure_error_signature = (
    0xafc445e200000000000000000000000000000000000000000000000000000000
);
uint256 constant ERC1155BatchTransferGenericFailure_token_ptr = 0x04;
uint256 constant ERC1155BatchTransferGenericFailure_ids_offset = 0xc0;

// SPDX-License-Identifier: MIT
pragma solidity 0.8.14;

/**
 * @title TokenTransferrerErrors
 */
interface TokenTransferrerErrors {
    /**
     * @dev Revert with an error when an ERC721 transfer with amount other than
     *      one is attempted.
     */
    error InvalidERC721TransferAmount();

    /**
     * @dev Revert with an error when attempting to fulfill an order where an
     *      item has an amount of zero.
     */
    error MissingItemAmount();

    /**
     * @dev Revert with an error when attempting to fulfill an order where an
     *      item has unused parameters. This includes both the token and the
     *      identifier parameters for native transfers as well as the identifier
     *      parameter for ERC20 transfers. Note that the conduit does not
     *      perform this check, leaving it up to the calling channel to enforce
     *      when desired.
     */
    error UnusedItemParameters();

    /**
     * @dev Revert with an error when an ERC20, ERC721, or ERC1155 token
     *      transfer reverts.
     *
     * @param token      The token for which the transfer was attempted.
     * @param from       The source of the attempted transfer.
     * @param to         The recipient of the attempted transfer.
     * @param identifier The identifier for the attempted transfer.
     * @param amount     The amount for the attempted transfer.
     */
    error TokenTransferGenericFailure(
        address token,
        address from,
        address to,
        uint256 identifier,
        uint256 amount
    );

    /**
     * @dev Revert with an error when a batch ERC1155 token transfer reverts.
     *
     * @param token       The token for which the transfer was attempted.
     * @param from        The source of the attempted transfer.
     * @param to          The recipient of the attempted transfer.
     * @param identifiers The identifiers for the attempted transfer.
     * @param amounts     The amounts for the attempted transfer.
     */
    error ERC1155BatchTransferGenericFailure(
        address token,
        address from,
        address to,
        uint256[] identifiers,
        uint256[] amounts
    );

    /**
     * @dev Revert with an error when an ERC20 token transfer returns a falsey
     *      value.
     *
     * @param token      The token for which the ERC20 transfer was attempted.
     * @param from       The source of the attempted ERC20 transfer.
     * @param to         The recipient of the attempted ERC20 transfer.
     * @param amount     The amount for the attempted ERC20 transfer.
     */
    error BadReturnValueFromERC20OnTransfer(
        address token,
        address from,
        address to,
        uint256 amount
    );

    /**
     * @dev Revert with an error when an account being called as an assumed
     *      contract does not have code and returns no data.
     *
     * @param account The account that should contain code.
     */
    error NoContract(address account);

    /**
     * @dev Revert with an error when attempting to execute an 1155 batch
     *      transfer using calldata not produced by default ABI encoding or with
     *      different lengths for ids and amounts arrays.
     */
    error Invalid1155BatchTransferEncoding();
}

{
  "viaIR": true,
  "optimizer": {
    "enabled": true,
    "runs": 1000000
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"BadReturnValueFromERC20OnTransfer","type":"error"},{"inputs":[{"internalType":"address","name":"channel","type":"address"}],"name":"ChannelClosed","type":"error"},{"inputs":[{"internalType":"address","name":"channel","type":"address"},{"internalType":"bool","name":"isOpen","type":"bool"}],"name":"ChannelStatusAlreadySet","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256[]","name":"identifiers","type":"uint256[]"},{"internalType":"uint256[]","name":"amounts","type":"uint256[]"}],"name":"ERC1155BatchTransferGenericFailure","type":"error"},{"inputs":[],"name":"Invalid1155BatchTransferEncoding","type":"error"},{"inputs":[],"name":"InvalidController","type":"error"},{"inputs":[],"name":"InvalidERC721TransferAmount","type":"error"},{"inputs":[],"name":"InvalidItemType","type":"error"},{"inputs":[],"name":"MissingItemAmount","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"NoContract","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"identifier","type":"uint256"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"TokenTransferGenericFailure","type":"error"},{"inputs":[],"name":"UnusedItemParameters","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"channel","type":"address"},{"indexed":false,"internalType":"bool","name":"open","type":"bool"}],"name":"ChannelUpdated","type":"event"},{"inputs":[{"components":[{"internalType":"enum ConduitItemType","name":"itemType","type":"uint8"},{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"identifier","type":"uint256"},{"internalType":"uint256","name":"amount","type":"uint256"}],"internalType":"struct ConduitTransfer[]","name":"transfers","type":"tuple[]"}],"name":"execute","outputs":[{"internalType":"bytes4","name":"magicValue","type":"bytes4"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256[]","name":"ids","type":"uint256[]"},{"internalType":"uint256[]","name":"amounts","type":"uint256[]"}],"internalType":"struct ConduitBatch1155Transfer[]","name":"batchTransfers","type":"tuple[]"}],"name":"executeBatch1155","outputs":[{"internalType":"bytes4","name":"magicValue","type":"bytes4"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"enum ConduitItemType","name":"itemType","type":"uint8"},{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"identifier","type":"uint256"},{"internalType":"uint256","name":"amount","type":"uint256"}],"internalType":"struct ConduitTransfer[]","name":"standardTransfers","type":"tuple[]"},{"components":[{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256[]","name":"ids","type":"uint256[]"},{"internalType":"uint256[]","name":"amounts","type":"uint256[]"}],"internalType":"struct ConduitBatch1155Transfer[]","name":"batchTransfers","type":"tuple[]"}],"name":"executeWithBatch1155","outputs":[{"internalType":"bytes4","name":"magicValue","type":"bytes4"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"channel","type":"address"},{"internalType":"bool","name":"isOpen","type":"bool"}],"name":"updateChannel","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

1058:9135:0:-:0;;;;;;;;;-1:-1:-1;1058:9135:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;;:::i;:::-;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;1571:1004;;;;;1058:9135;1571:1004;1058:9135;1571:1004;;;;;;3938:26;;;;;;1058:9135;;;;;;;;3923:13;4067:12;;;1058:9135;4067:12;;;;:::i;:::-;;:::i;:::-;1058:9135;3923:13;;1571:1004;;;;;;;1058:9135;1571:1004;;1058:9135;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::o;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::o;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;:::i;:::-;-1:-1:-1;;;;1571:1004:0;;;;1058:9135;1571:1004;1058:9135;1571:1004;;;;;;6952:26;;;;;;7494:14;;;;:::i;:::-;1058:9135;;;;;;;;6937:13;7081:20;;;1058:9135;7081:20;;;;:::i;:::-;1058:9135;6937:13;;1058:9135;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;1571:1004;-1:-1:-1;1571:1004:0;-1:-1:-1;1058:9135:0;1571:1004;;-1:-1:-1;1571:1004:0;;;;;5445:14;;;:::i;:::-;1058:9135;1571:1004;1058:9135;;;;;1571:1004;;-1:-1:-1;1571:1004:0;;1058:9135;1571:1004;;-1:-1:-1;1571:1004:0;1058:9135;;;;;;;:::o;:::-;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;8054:11;;;1058:9135;8040:10;:25;8036:82;;8211:18;;;1058:9135;;8211:9;1058:9135;8211:9;1058:9135;;;8211:9;1058:9135;;;8211:18;1058:9135;;;;;8211:18;1058:9135;;8211:28;8207:106;;8368:18;:27;:18;;8450:31;8368:18;1058:9135;;8211:9;1058:9135;8211:9;1058:9135;;;8211:9;1058:9135;;;8368:18;1058:9135;;;;;;;;;;;;;;8368:27;1058:9135;;;;;;;;;;;8450:31;1058:9135;8207:106;-1:-1:-1;1058:9135:0;;8262:40;;;1058:9135;;;;;;8262:40;;1058:9135;;;;;;;;;;8262:40;8036:82;1058:9135;;;8088:19;;;;1058:9135;;;;;;;;;;;;:::o;:::-;;;;;;;;;;;;-1:-1:-1;1058:9135:0;;;:::o;:::-;;;;;;;;;;;;;;;;;;;:::o;:::-;;;;;:::i;:::-;;:::o;8794:1397::-;8960:21;8943:13;;;:::i;:::-;1058:9135;;;:::i;:::-;8943:38;8960:21;;9306:10;;;9338:11;9306:10;;;:::i;:::-;9318:9;;;;;;:::i;:::-;9338:11;9329:7;;;;;:::i;:::-;9338:11;;1058:9135;9338:11;;:::i;:::-;8794:1397::o;8939:1246::-;9388:22;9371:13;;;:::i;:::-;1058:9135;;;:::i;:::-;9371:39;9388:22;;8960:21;9500:11;;;1058:9135;9500:16;9496:91;;9679:10;;;9759:15;9679:10;;;:::i;:::-;9707:9;;;;;;:::i;:::-;9759:15;9734:7;;;;;:::i;:::-;9759:15;;1058:9135;9759:15;;:::i;9496:91::-;9543:29;1058:9135;;9543:29;;;;9367:818;9826:23;9809:13;;;:::i;:::-;1058:9135;;;:::i;:::-;9809:40;9826:23;;9945:10;;;10058:11;9945:10;;;:::i;:::-;9973:9;;;;;:::i;:::-;10000:7;;;;;:::i;:::-;10058:11;10025:15;10058:11;;;1058:9135;10025:15;;1058:9135;10058:11;;:::i;9805:380::-;10157:17;1058:9135;;10157:17;;;;1325:9615:6;;;1544:9390;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;1325:9615;1544:9390;;;;;;;;;;1325:9615::o;1544:9390::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;11544:4914;;;11769:4683;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;11544:4914::o;11769:4683::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;17106:5620;;;;17357:5363;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;17106:5620::o;17357:5363::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;23677:11483;;23872:11282;;;;;;;;;;;;;;;;;;;;;23677:11483::o;23872:11282::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

ipfs://c5c8d054d9d5df7c3530eab1c32506aad1fcb6772c1457f0da5443ad9e91b4a3