Contract

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT

pragma solidity 0.6.11;

import "./TokenVesting.sol";

contract FundsDistributor is TokenVesting {
    /// @notice identifier for the contract
    string public identifier;

    /**
     * @notice Construct a new Funds Distributor Contract
     * @param beneficiary address of the beneficiary to whom vested tokens are transferred
     * @param cliffDuration duration in seconds of the cliff in which tokens will begin to vest
     * @param start the time (as Unix time) at which point vesting starts
     * @param duration duration in seconds of the period in which the tokens will vest
     * @param revocable whether the vesting is revocable or not
     * @param _identifier unique identifier for the contract
     */
    constructor(address beneficiary, uint256 start, uint256 cliffDuration, uint256 duration, bool revocable, string memory _identifier) TokenVesting(beneficiary, start, cliffDuration, duration, revocable) public {
      identifier = _identifier;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.6.11;

import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";

/**
 * @title TokenVesting
 * @dev A token holder contract that can release its token balance gradually like a
 * typical vesting scheme, with a cliff and vesting period. Optionally revocable by the
 * owner.
 */
contract TokenVesting is Ownable {
    // The vesting schedule is time-based (i.e. using block timestamps as opposed to e.g. block numbers), and is
    // therefore sensitive to timestamp manipulation (which is something miners can do, to a certain degree). Therefore,
    // it is recommended to avoid using short time durations (less than a minute). Typical vesting schemes, with a
    // cliff period of a year and a duration of four years, are safe to use.
    // solhint-disable not-rely-on-time

    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    event TokensReleased(address token, uint256 amount);
    event TokensReleasedToAccount(address token, address receiver, uint256 amount);
    event VestingRevoked(address token);
    event BeneficiaryChanged(address newBeneficiary);

    // beneficiary of tokens after they are released
    address private _beneficiary;

    // Durations and timestamps are expressed in UNIX time, the same units as block.timestamp.
    uint256 private immutable _cliff;
    uint256 private immutable _start;
    uint256 private immutable _duration;

    bool private immutable _revocable;

    mapping (address => uint256) private _released;
    mapping (address => bool) private _revoked;

    /**
     * @dev Creates a vesting contract that vests its balance of any ERC20 token to the
     * beneficiary, gradually in a linear fashion until start + duration. By then all
     * of the balance will have vested.
     * @param beneficiary address of the beneficiary to whom vested tokens are transferred
     * @param cliffDuration duration in seconds of the cliff in which tokens will begin to vest
     * @param start the time (as Unix time) at which point vesting starts
     * @param duration duration in seconds of the period in which the tokens will vest
     * @param revocable whether the vesting is revocable or not
     */
    constructor (address beneficiary, uint256 start, uint256 cliffDuration, uint256 duration, bool revocable) public {
        require(beneficiary != address(0), "TokenVesting::constructor: beneficiary is the zero address");
        // solhint-disable-next-line max-line-length
        require(cliffDuration <= duration, "TokenVesting::constructor: cliff is longer than duration");
        require(duration > 0, "TokenVesting::constructor: duration is 0");
        // solhint-disable-next-line max-line-length
        require(start.add(duration) > block.timestamp, "TokenVesting::constructor: final time is before current time");

        _beneficiary = beneficiary;
        _revocable = revocable;
        _duration = duration;
        _cliff = start.add(cliffDuration);
        _start = start;
    }

    /**
     * @return the beneficiary of the tokens.
     */
    function beneficiary() public view returns (address) {
        return _beneficiary;
    }

    /**
     * @return the cliff time of the token vesting.
     */
    function cliff() public view returns (uint256) {
        return _cliff;
    }

    /**
     * @return the start time of the token vesting.
     */
    function start() public view returns (uint256) {
        return _start;
    }

    /**
     * @return the duration of the token vesting.
     */
    function duration() public view returns (uint256) {
        return _duration;
    }

    /**
     * @return true if the vesting is revocable.
     */
    function revocable() public view returns (bool) {
        return _revocable;
    }

    /**
     * @return the amount of the token released.
     */
    function released(address token) public view returns (uint256) {
        return _released[token];
    }

    /**
     * @return true if the token is revoked.
     */
    function revoked(address token) public view returns (bool) {
        return _revoked[token];
    }

    /**
     * @notice Transfers vested tokens to beneficiary.
     * @param token ERC20 token which is being vested
     */
    function release(IERC20 token) public {
        uint256 unreleased = _releasableAmount(token);

        require(unreleased > 0, "TokenVesting::release: no tokens are due");

        _released[address(token)] = _released[address(token)].add(unreleased);

        token.safeTransfer(_beneficiary, unreleased);

        emit TokensReleased(address(token), unreleased);
    }

    /**
     * @notice Transfers vested tokens to given address.
     * @param token ERC20 token which is being vested
     * @param receiver Address receiving the token
     * @param amount Amount of tokens to be transferred
     */
    function releaseToAddress(IERC20 token, address receiver, uint256 amount) public {
        require(_msgSender() == _beneficiary, "TokenVesting::setBeneficiary: Not contract beneficiary");
        require(amount > 0, "TokenVesting::_releaseToAddress: amount should be greater than 0");

        require(receiver != address(0), "TokenVesting::_releaseToAddress: receiver is the zero address");

        uint256 unreleased = _releasableAmount(token);

        require(unreleased > 0, "TokenVesting::_releaseToAddress: no tokens are due");

        require(unreleased >= amount, "TokenVesting::_releaseToAddress: enough tokens not vested yet");

        _released[address(token)] = _released[address(token)].add(amount);

        token.safeTransfer(receiver, amount);

        emit TokensReleasedToAccount(address(token), receiver, amount);
    }

    /**
     * @notice Allows the owner to revoke the vesting. Tokens already vested
     * remain in the contract, the rest are returned to the owner.
     * @param token ERC20 token which is being vested
     */
    function revoke(IERC20 token) public onlyOwner {
        require(_revocable, "TokenVesting::revoke: cannot revoke");
        require(!_revoked[address(token)], "TokenVesting::revoke: token already revoked");

        uint256 balance = token.balanceOf(address(this));

        uint256 unreleased = _releasableAmount(token);
        uint256 refund = balance.sub(unreleased);

        _revoked[address(token)] = true;

        token.safeTransfer(owner(), refund);

        emit VestingRevoked(address(token));
    }

    /**
     * @notice Change the beneficiary of the contract
     * @param newBeneficiary The new beneficiary address for the Contract
     */
    function setBeneficiary(address newBeneficiary) public {
        require(_msgSender() == _beneficiary, "TokenVesting::setBeneficiary: Not contract beneficiary");
        require(_beneficiary != newBeneficiary, "TokenVesting::setBeneficiary: Same beneficiary address as old");
        _beneficiary = newBeneficiary;
        emit BeneficiaryChanged(newBeneficiary);
    }

    /**
     * @dev Calculates the amount that has already vested but hasn't been released yet.
     * @param token ERC20 token which is being vested
     */
    function _releasableAmount(IERC20 token) private view returns (uint256) {
        return _vestedAmount(token).sub(_released[address(token)]);
    }

    /**
     * @dev Calculates the amount that has already vested.
     * @param token ERC20 token which is being vested
     */
    function _vestedAmount(IERC20 token) private view returns (uint256) {
        uint256 currentBalance = token.balanceOf(address(this));
        uint256 totalBalance = currentBalance.add(_released[address(token)]);

        if (block.timestamp < _cliff) {
            return 0;
        } else if (block.timestamp >= _start.add(_duration) || _revoked[address(token)]) {
            return totalBalance;
        } else {
            return totalBalance.mul(block.timestamp.sub(_start)).div(_duration);
        }
    }

    /**
     * @dev Returns the amount that has already vested.
     * @param token ERC20 token which is being vested
     */
    function vestedAmount(IERC20 token) public view returns (uint256) {
        return _vestedAmount(token);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"beneficiary","type":"address"},{"internalType":"uint256","name":"start","type":"uint256"},{"internalType":"uint256","name":"cliffDuration","type":"uint256"},{"internalType":"uint256","name":"duration","type":"uint256"},{"internalType":"bool","name":"revocable","type":"bool"},{"internalType":"string","name":"_identifier","type":"string"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"newBeneficiary","type":"address"}],"name":"BeneficiaryChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"token","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"TokensReleased","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"token","type":"address"},{"indexed":false,"internalType":"address","name":"receiver","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"TokensReleasedToAccount","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"token","type":"address"}],"name":"VestingRevoked","type":"event"},{"inputs":[],"name":"beneficiary","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"cliff","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"duration","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"identifier","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"}],"name":"release","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"releaseToAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"released","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"revocable","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"}],"name":"revoke","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"revoked","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newBeneficiary","type":"address"}],"name":"setBeneficiary","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"start","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"}],"name":"vestedAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"}]

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