Contract

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts-upgradeable/proxy/Initializable.sol";
import "@openzeppelin/contracts-upgradeable/utils/ReentrancyGuardUpgradeable.sol";
import "../LPToken.sol";
import "../interfaces/ISwap.sol";
import "../interfaces/IMetaSwap.sol";

/**
 * @title MetaSwapDeposit
 * @notice This contract flattens the LP token in a MetaSwap pool for easier user access. MetaSwap must be
 * deployed before this contract can be initialized successfully.
 *
 * For example, suppose there exists a base Swap pool consisting of [DAI, USDC, USDT].
 * Then a MetaSwap pool can be created with [sUSD, BaseSwapLPToken] to allow trades between either
 * the LP token or the underlying tokens and sUSD.
 *
 * MetaSwapDeposit flattens the LP token and remaps them to a single array, allowing users
 * to ignore the dependency on BaseSwapLPToken. Using the above example, MetaSwapDeposit can act
 * as a Swap containing [sUSD, DAI, USDC, USDT] tokens.
 */
contract MetaSwapDeposit is Initializable, ReentrancyGuardUpgradeable {
    using SafeERC20 for IERC20;
    using SafeMath for uint256;

    ISwap public baseSwap;
    IMetaSwap public metaSwap;
    IERC20[] public baseTokens;
    IERC20[] public metaTokens;
    IERC20[] public tokens;
    IERC20 public metaLPToken;

    uint256 constant MAX_UINT256 = 2**256 - 1;

    struct RemoveLiquidityImbalanceInfo {
        ISwap baseSwap;
        IMetaSwap metaSwap;
        IERC20 metaLPToken;
        uint8 baseLPTokenIndex;
        bool withdrawFromBase;
        uint256 leftoverMetaLPTokenAmount;
    }

    /**
     * @notice Sets the address for the base Swap contract, MetaSwap contract, and the
     * MetaSwap LP token contract.
     * @param _baseSwap the address of the base Swap contract
     * @param _metaSwap the address of the MetaSwap contract
     * @param _metaLPToken the address of the MetaSwap LP token contract
     */
    function initialize(
        ISwap _baseSwap,
        IMetaSwap _metaSwap,
        IERC20 _metaLPToken
    ) external initializer {
        __ReentrancyGuard_init();
        // Check and approve base level tokens to be deposited to the base Swap contract
        {
            uint8 i;
            for (; i < 32; i++) {
                try _baseSwap.getToken(i) returns (IERC20 token) {
                    baseTokens.push(token);
                    token.safeApprove(address(_baseSwap), MAX_UINT256);
                    token.safeApprove(address(_metaSwap), MAX_UINT256);
                } catch {
                    break;
                }
            }
            require(i > 1, "baseSwap must have at least 2 tokens");
        }

        // Check and approve meta level tokens to be deposited to the MetaSwap contract
        IERC20 baseLPToken;
        {
            uint8 i;
            for (; i < 32; i++) {
                try _metaSwap.getToken(i) returns (IERC20 token) {
                    baseLPToken = token;
                    metaTokens.push(token);
                    tokens.push(token);
                    token.safeApprove(address(_metaSwap), MAX_UINT256);
                } catch {
                    break;
                }
            }
            require(i > 1, "metaSwap must have at least 2 tokens");
        }

        // Flatten baseTokens and append it to tokens array
        tokens[tokens.length - 1] = baseTokens[0];
        for (uint8 i = 1; i < baseTokens.length; i++) {
            tokens.push(baseTokens[i]);
        }

        // Approve base Swap LP token to be burned by the base Swap contract for withdrawing
        baseLPToken.safeApprove(address(_baseSwap), MAX_UINT256);
        // Approve MetaSwap LP token to be burned by the MetaSwap contract for withdrawing
        _metaLPToken.safeApprove(address(_metaSwap), MAX_UINT256);

        // Initialize storage variables
        baseSwap = _baseSwap;
        metaSwap = _metaSwap;
        metaLPToken = _metaLPToken;
    }

    // Mutative functions

    /**
     * @notice Swap two underlying tokens using the meta pool and the base pool
     * @param tokenIndexFrom the token the user wants to swap from
     * @param tokenIndexTo the token the user wants to swap to
     * @param dx the amount of tokens the user wants to swap from
     * @param minDy the min amount the user would like to receive, or revert.
     * @param deadline latest timestamp to accept this transaction
     */
    function swap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx,
        uint256 minDy,
        uint256 deadline
    ) external nonReentrant returns (uint256) {
        tokens[tokenIndexFrom].safeTransferFrom(msg.sender, address(this), dx);
        uint256 tokenToAmount = metaSwap.swapUnderlying(
            tokenIndexFrom,
            tokenIndexTo,
            dx,
            minDy,
            deadline
        );
        tokens[tokenIndexTo].safeTransfer(msg.sender, tokenToAmount);
        return tokenToAmount;
    }

    /**
     * @notice Add liquidity to the pool with the given amounts of tokens
     * @param amounts the amounts of each token to add, in their native precision
     * @param minToMint the minimum LP tokens adding this amount of liquidity
     * should mint, otherwise revert. Handy for front-running mitigation
     * @param deadline latest timestamp to accept this transaction
     * @return amount of LP token user minted and received
     */
    function addLiquidity(
        uint256[] calldata amounts,
        uint256 minToMint,
        uint256 deadline
    ) external nonReentrant returns (uint256) {
        // Read to memory to save on gas
        IERC20[] memory memBaseTokens = baseTokens;
        IERC20[] memory memMetaTokens = metaTokens;
        uint256 baseLPTokenIndex = memMetaTokens.length - 1;

        require(amounts.length == memBaseTokens.length + baseLPTokenIndex);

        uint256 baseLPTokenAmount;
        {
            // Transfer base tokens from the caller and deposit to the base Swap pool
            uint256[] memory baseAmounts = new uint256[](memBaseTokens.length);
            bool shouldDepositBaseTokens;
            for (uint8 i = 0; i < memBaseTokens.length; i++) {
                IERC20 token = memBaseTokens[i];
                uint256 depositAmount = amounts[baseLPTokenIndex + i];
                if (depositAmount > 0) {
                    token.safeTransferFrom(
                        msg.sender,
                        address(this),
                        depositAmount
                    );
                    baseAmounts[i] = token.balanceOf(address(this)); // account for any fees on transfer
                    // if there are any base Swap level tokens, flag it for deposits
                    shouldDepositBaseTokens = true;
                }
            }
            if (shouldDepositBaseTokens) {
                // Deposit any base Swap level tokens and receive baseLPToken
                baseLPTokenAmount = baseSwap.addLiquidity(
                    baseAmounts,
                    0,
                    deadline
                );
            }
        }

        uint256 metaLPTokenAmount;
        {
            // Transfer remaining meta level tokens from the caller
            uint256[] memory metaAmounts = new uint256[](metaTokens.length);
            for (uint8 i = 0; i < baseLPTokenIndex; i++) {
                IERC20 token = memMetaTokens[i];
                uint256 depositAmount = amounts[i];
                if (depositAmount > 0) {
                    token.safeTransferFrom(
                        msg.sender,
                        address(this),
                        depositAmount
                    );
                    metaAmounts[i] = token.balanceOf(address(this)); // account for any fees on transfer
                }
            }
            // Update the baseLPToken amount that will be deposited
            metaAmounts[baseLPTokenIndex] = baseLPTokenAmount;

            // Deposit the meta level tokens and the baseLPToken
            metaLPTokenAmount = metaSwap.addLiquidity(
                metaAmounts,
                minToMint,
                deadline
            );
        }

        // Transfer the meta lp token to the caller
        metaLPToken.safeTransfer(msg.sender, metaLPTokenAmount);

        return metaLPTokenAmount;
    }

    /**
     * @notice Burn LP tokens to remove liquidity from the pool. Withdraw fee that decays linearly
     * over period of 4 weeks since last deposit will apply.
     * @dev Liquidity can always be removed, even when the pool is paused.
     * @param amount the amount of LP tokens to burn
     * @param minAmounts the minimum amounts of each token in the pool
     *        acceptable for this burn. Useful as a front-running mitigation
     * @param deadline latest timestamp to accept this transaction
     * @return amounts of tokens user received
     */
    function removeLiquidity(
        uint256 amount,
        uint256[] calldata minAmounts,
        uint256 deadline
    ) external nonReentrant returns (uint256[] memory) {
        IERC20[] memory memBaseTokens = baseTokens;
        IERC20[] memory memMetaTokens = metaTokens;
        uint256[] memory totalRemovedAmounts;

        {
            uint256 numOfAllTokens = memBaseTokens.length +
                memMetaTokens.length -
                1;
            require(minAmounts.length == numOfAllTokens, "out of range");
            totalRemovedAmounts = new uint256[](numOfAllTokens);
        }

        // Transfer meta lp token from the caller to this
        metaLPToken.safeTransferFrom(msg.sender, address(this), amount);

        uint256 baseLPTokenAmount;
        {
            // Remove liquidity from the MetaSwap pool
            uint256[] memory removedAmounts;
            uint256 baseLPTokenIndex = memMetaTokens.length - 1;
            {
                uint256[] memory metaMinAmounts = new uint256[](
                    memMetaTokens.length
                );
                for (uint8 i = 0; i < baseLPTokenIndex; i++) {
                    metaMinAmounts[i] = minAmounts[i];
                }
                removedAmounts = metaSwap.removeLiquidity(
                    amount,
                    metaMinAmounts,
                    deadline
                );
            }

            // Send the meta level tokens to the caller
            for (uint8 i = 0; i < baseLPTokenIndex; i++) {
                totalRemovedAmounts[i] = removedAmounts[i];
                memMetaTokens[i].safeTransfer(msg.sender, removedAmounts[i]);
            }
            baseLPTokenAmount = removedAmounts[baseLPTokenIndex];

            // Remove liquidity from the base Swap pool
            {
                uint256[] memory baseMinAmounts = new uint256[](
                    memBaseTokens.length
                );
                for (uint8 i = 0; i < baseLPTokenIndex; i++) {
                    baseMinAmounts[i] = minAmounts[baseLPTokenIndex + i];
                }
                removedAmounts = baseSwap.removeLiquidity(
                    baseLPTokenAmount,
                    baseMinAmounts,
                    deadline
                );
            }

            // Send the base level tokens to the caller
            for (uint8 i = 0; i < memBaseTokens.length; i++) {
                totalRemovedAmounts[baseLPTokenIndex + i] = removedAmounts[i];
                memBaseTokens[i].safeTransfer(msg.sender, removedAmounts[i]);
            }
        }

        return totalRemovedAmounts;
    }

    /**
     * @notice Remove liquidity from the pool all in one token. Withdraw fee that decays linearly
     * over period of 4 weeks since last deposit will apply.
     * @param tokenAmount the amount of the token you want to receive
     * @param tokenIndex the index of the token you want to receive
     * @param minAmount the minimum amount to withdraw, otherwise revert
     * @param deadline latest timestamp to accept this transaction
     * @return amount of chosen token user received
     */
    function removeLiquidityOneToken(
        uint256 tokenAmount,
        uint8 tokenIndex,
        uint256 minAmount,
        uint256 deadline
    ) external nonReentrant returns (uint256) {
        uint8 baseLPTokenIndex = uint8(metaTokens.length - 1);
        uint8 baseTokensLength = uint8(baseTokens.length);

        // Transfer metaLPToken from the caller
        metaLPToken.safeTransferFrom(msg.sender, address(this), tokenAmount);

        IERC20 token;
        if (tokenIndex < baseLPTokenIndex) {
            // When the desired token is meta level token, we can just call `removeLiquidityOneToken` directly
            metaSwap.removeLiquidityOneToken(
                tokenAmount,
                tokenIndex,
                minAmount,
                deadline
            );
            token = metaTokens[tokenIndex];
        } else if (tokenIndex < baseLPTokenIndex + baseTokensLength) {
            // When the desired token is a base level token, we need to first withdraw via baseLPToken, then withdraw
            // the desired token from the base Swap contract.
            uint256 removedBaseLPTokenAmount = metaSwap.removeLiquidityOneToken(
                tokenAmount,
                baseLPTokenIndex,
                0,
                deadline
            );

            baseSwap.removeLiquidityOneToken(
                removedBaseLPTokenAmount,
                tokenIndex - baseLPTokenIndex,
                minAmount,
                deadline
            );
            token = baseTokens[tokenIndex - baseLPTokenIndex];
        } else {
            revert("out of range");
        }

        uint256 amountWithdrawn = token.balanceOf(address(this));
        token.safeTransfer(msg.sender, amountWithdrawn);
        return amountWithdrawn;
    }

    /**
     * @notice Remove liquidity from the pool, weighted differently than the
     * pool's current balances. Withdraw fee that decays linearly
     * over period of 4 weeks since last deposit will apply.
     * @param amounts how much of each token to withdraw
     * @param maxBurnAmount the max LP token provider is willing to pay to
     * remove liquidity. Useful as a front-running mitigation.
     * @param deadline latest timestamp to accept this transaction
     * @return amount of LP tokens burned
     */
    function removeLiquidityImbalance(
        uint256[] calldata amounts,
        uint256 maxBurnAmount,
        uint256 deadline
    ) external nonReentrant returns (uint256) {
        IERC20[] memory memBaseTokens = baseTokens;
        IERC20[] memory memMetaTokens = metaTokens;
        uint256[] memory metaAmounts = new uint256[](memMetaTokens.length);
        uint256[] memory baseAmounts = new uint256[](memBaseTokens.length);

        require(
            amounts.length == memBaseTokens.length + memMetaTokens.length - 1,
            "out of range"
        );

        RemoveLiquidityImbalanceInfo memory v = RemoveLiquidityImbalanceInfo(
            baseSwap,
            metaSwap,
            metaLPToken,
            uint8(metaAmounts.length - 1),
            false,
            0
        );

        for (uint8 i = 0; i < v.baseLPTokenIndex; i++) {
            metaAmounts[i] = amounts[i];
        }

        for (uint8 i = 0; i < baseAmounts.length; i++) {
            baseAmounts[i] = amounts[v.baseLPTokenIndex + i];
            if (baseAmounts[i] > 0) {
                v.withdrawFromBase = true;
            }
        }

        // Calculate how much base LP token we need to get the desired amount of underlying tokens
        if (v.withdrawFromBase) {
            metaAmounts[v.baseLPTokenIndex] = v
                .baseSwap
                .calculateTokenAmount(baseAmounts, false)
                .mul(10005)
                .div(10000);
        }

        // Transfer MetaSwap LP token from the caller to this contract
        v.metaLPToken.safeTransferFrom(
            msg.sender,
            address(this),
            maxBurnAmount
        );

        // Withdraw the paired meta level tokens and the base LP token from the MetaSwap pool
        uint256 burnedMetaLPTokenAmount = v.metaSwap.removeLiquidityImbalance(
            metaAmounts,
            maxBurnAmount,
            deadline
        );
        v.leftoverMetaLPTokenAmount = maxBurnAmount.sub(
            burnedMetaLPTokenAmount
        );

        // If underlying tokens are desired, withdraw them from the base Swap pool
        if (v.withdrawFromBase) {
            v.baseSwap.removeLiquidityImbalance(
                baseAmounts,
                metaAmounts[v.baseLPTokenIndex],
                deadline
            );

            // Base Swap may require LESS base LP token than the amount we have
            // In that case, deposit it to the MetaSwap pool.
            uint256[] memory leftovers = new uint256[](metaAmounts.length);
            IERC20 baseLPToken = memMetaTokens[v.baseLPTokenIndex];
            uint256 leftoverBaseLPTokenAmount = baseLPToken.balanceOf(
                address(this)
            );
            if (leftoverBaseLPTokenAmount > 0) {
                leftovers[v.baseLPTokenIndex] = leftoverBaseLPTokenAmount;
                v.leftoverMetaLPTokenAmount = v.leftoverMetaLPTokenAmount.add(
                    v.metaSwap.addLiquidity(leftovers, 0, deadline)
                );
            }
        }

        // Transfer all withdrawn tokens to the caller
        for (uint8 i = 0; i < amounts.length; i++) {
            IERC20 token;
            if (i < v.baseLPTokenIndex) {
                token = memMetaTokens[i];
            } else {
                token = memBaseTokens[i - v.baseLPTokenIndex];
            }
            if (amounts[i] > 0) {
                token.safeTransfer(msg.sender, amounts[i]);
            }
        }

        // If there were any extra meta lp token, transfer them back to the caller as well
        if (v.leftoverMetaLPTokenAmount > 0) {
            v.metaLPToken.safeTransfer(msg.sender, v.leftoverMetaLPTokenAmount);
        }

        return maxBurnAmount - v.leftoverMetaLPTokenAmount;
    }

    // VIEW FUNCTIONS

    /**
     * @notice A simple method to calculate prices from deposits or
     * withdrawals, excluding fees but including slippage. This is
     * helpful as an input into the various "min" parameters on calls
     * to fight front-running. When withdrawing from the base pool in imbalanced
     * fashion, the recommended slippage setting is 0.2% or higher.
     *
     * @dev This shouldn't be used outside frontends for user estimates.
     *
     * @param amounts an array of token amounts to deposit or withdrawal,
     * corresponding to pooledTokens. The amount should be in each
     * pooled token's native precision. If a token charges a fee on transfers,
     * use the amount that gets transferred after the fee.
     * @param deposit whether this is a deposit or a withdrawal
     * @return token amount the user will receive
     */
    function calculateTokenAmount(uint256[] calldata amounts, bool deposit)
        external
        view
        returns (uint256)
    {
        uint256[] memory metaAmounts = new uint256[](metaTokens.length);
        uint256[] memory baseAmounts = new uint256[](baseTokens.length);
        uint256 baseLPTokenIndex = metaAmounts.length - 1;

        for (uint8 i = 0; i < baseLPTokenIndex; i++) {
            metaAmounts[i] = amounts[i];
        }

        for (uint8 i = 0; i < baseAmounts.length; i++) {
            baseAmounts[i] = amounts[baseLPTokenIndex + i];
        }

        uint256 baseLPTokenAmount = baseSwap.calculateTokenAmount(
            baseAmounts,
            deposit
        );
        metaAmounts[baseLPTokenIndex] = baseLPTokenAmount;

        return metaSwap.calculateTokenAmount(metaAmounts, deposit);
    }

    /**
     * @notice A simple method to calculate amount of each underlying
     * tokens that is returned upon burning given amount of LP tokens
     * @param amount the amount of LP tokens that would be burned on withdrawal
     * @return array of token balances that the user will receive
     */
    function calculateRemoveLiquidity(uint256 amount)
        external
        view
        returns (uint256[] memory)
    {
        uint256[] memory metaAmounts = metaSwap.calculateRemoveLiquidity(
            amount
        );
        uint8 baseLPTokenIndex = uint8(metaAmounts.length - 1);
        uint256[] memory baseAmounts = baseSwap.calculateRemoveLiquidity(
            metaAmounts[baseLPTokenIndex]
        );

        uint256[] memory totalAmounts = new uint256[](
            baseLPTokenIndex + baseAmounts.length
        );
        for (uint8 i = 0; i < baseLPTokenIndex; i++) {
            totalAmounts[i] = metaAmounts[i];
        }
        for (uint8 i = 0; i < baseAmounts.length; i++) {
            totalAmounts[baseLPTokenIndex + i] = baseAmounts[i];
        }

        return totalAmounts;
    }

    /**
     * @notice Calculate the amount of underlying token available to withdraw
     * when withdrawing via only single token
     * @param tokenAmount the amount of LP token to burn
     * @param tokenIndex index of which token will be withdrawn
     * @return availableTokenAmount calculated amount of underlying token
     * available to withdraw
     */
    function calculateRemoveLiquidityOneToken(
        uint256 tokenAmount,
        uint8 tokenIndex
    ) external view returns (uint256) {
        uint8 baseLPTokenIndex = uint8(metaTokens.length - 1);

        if (tokenIndex < baseLPTokenIndex) {
            return
                metaSwap.calculateRemoveLiquidityOneToken(
                    tokenAmount,
                    tokenIndex
                );
        } else {
            uint256 baseLPTokenAmount = metaSwap
                .calculateRemoveLiquidityOneToken(
                    tokenAmount,
                    baseLPTokenIndex
                );
            return
                baseSwap.calculateRemoveLiquidityOneToken(
                    baseLPTokenAmount,
                    tokenIndex - baseLPTokenIndex
                );
        }
    }

    /**
     * @notice Returns the address of the pooled token at given index. Reverts if tokenIndex is out of range.
     * This is a flattened representation of the pooled tokens.
     * @param index the index of the token
     * @return address of the token at given index
     */
    function getToken(uint8 index) external view returns (IERC20) {
        require(index < tokens.length, "index out of range");
        return tokens[index];
    }

    /**
     * @notice Calculate amount of tokens you receive on swap
     * @param tokenIndexFrom the token the user wants to sell
     * @param tokenIndexTo the token the user wants to buy
     * @param dx the amount of tokens the user wants to sell. If the token charges
     * a fee on transfers, use the amount that gets transferred after the fee.
     * @return amount of tokens the user will receive
     */
    function calculateSwap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx
    ) external view returns (uint256) {
        return
            metaSwap.calculateSwapUnderlying(tokenIndexFrom, tokenIndexTo, dx);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../utils/ContextUpgradeable.sol";
import "../proxy/Initializable.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    function __Ownable_init() internal initializer {
        __Context_init_unchained();
        __Ownable_init_unchained();
    }

    function __Ownable_init_unchained() internal initializer {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
    uint256[49] private __gap;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMathUpgradeable {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

// SPDX-License-Identifier: MIT

// solhint-disable-next-line compiler-version
pragma solidity >=0.4.24 <0.8.0;

import "../utils/AddressUpgradeable.sol";

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {UpgradeableProxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 */
abstract contract Initializable {

    /**
     * @dev Indicates that the contract has been initialized.
     */
    bool private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Modifier to protect an initializer function from being invoked twice.
     */
    modifier initializer() {
        require(_initializing || _isConstructor() || !_initialized, "Initializable: contract is already initialized");

        bool isTopLevelCall = !_initializing;
        if (isTopLevelCall) {
            _initializing = true;
            _initialized = true;
        }

        _;

        if (isTopLevelCall) {
            _initializing = false;
        }
    }

    /// @dev Returns true if and only if the function is running in the constructor
    function _isConstructor() private view returns (bool) {
        return !AddressUpgradeable.isContract(address(this));
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../../utils/ContextUpgradeable.sol";
import "./ERC20Upgradeable.sol";
import "../../proxy/Initializable.sol";

/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20BurnableUpgradeable is Initializable, ContextUpgradeable, ERC20Upgradeable {
    function __ERC20Burnable_init() internal initializer {
        __Context_init_unchained();
        __ERC20Burnable_init_unchained();
    }

    function __ERC20Burnable_init_unchained() internal initializer {
    }
    using SafeMathUpgradeable for uint256;

    /**
     * @dev Destroys `amount` tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 amount) public virtual {
        _burn(_msgSender(), amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, deducting from the caller's
     * allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `amount`.
     */
    function burnFrom(address account, uint256 amount) public virtual {
        uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, "ERC20: burn amount exceeds allowance");

        _approve(account, _msgSender(), decreasedAllowance);
        _burn(account, amount);
    }
    uint256[50] private __gap;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../../utils/ContextUpgradeable.sol";
import "./IERC20Upgradeable.sol";
import "../../math/SafeMathUpgradeable.sol";
import "../../proxy/Initializable.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20Upgradeable {
    using SafeMathUpgradeable for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    function __ERC20_init(string memory name_, string memory symbol_) internal initializer {
        __Context_init_unchained();
        __ERC20_init_unchained(name_, symbol_);
    }

    function __ERC20_init_unchained(string memory name_, string memory symbol_) internal initializer {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal virtual {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
    uint256[44] private __gap;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20Upgradeable {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;
import "../proxy/Initializable.sol";

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal initializer {
        __Context_init_unchained();
    }

    function __Context_init_unchained() internal initializer {
    }
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
    uint256[50] private __gap;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;
import "../proxy/Initializable.sol";

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuardUpgradeable is Initializable {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    function __ReentrancyGuard_init() internal initializer {
        __ReentrancyGuard_init_unchained();
    }

    function __ReentrancyGuard_init_unchained() internal initializer {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
    uint256[49] private __gap;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../../utils/Context.sol";
import "./IERC20.sol";
import "../../math/SafeMath.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name_, string memory symbol_) public {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal virtual {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts-upgradeable/token/ERC20/ERC20BurnableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import "./interfaces/ISwap.sol";

/**
 * @title Liquidity Provider Token
 * @notice This token is an ERC20 detailed token with added capability to be minted by the owner.
 * It is used to represent user's shares when providing liquidity to swap contracts.
 * @dev Only Swap contracts should initialize and own LPToken contracts.
 */
contract LPToken is ERC20BurnableUpgradeable, OwnableUpgradeable {
    using SafeMathUpgradeable for uint256;

    /**
     * @notice Initializes this LPToken contract with the given name and symbol
     * @dev The caller of this function will become the owner. A Swap contract should call this
     * in its initializer function.
     * @param name name of this token
     * @param symbol symbol of this token
     */
    function initialize(string memory name, string memory symbol)
        external
        initializer
        returns (bool)
    {
        __Context_init_unchained();
        __ERC20_init_unchained(name, symbol);
        __Ownable_init_unchained();
        return true;
    }

    /**
     * @notice Mints the given amount of LPToken to the recipient.
     * @dev only owner can call this mint function
     * @param recipient address of account to receive the tokens
     * @param amount amount of tokens to mint
     */
    function mint(address recipient, uint256 amount) external onlyOwner {
        require(amount != 0, "LPToken: cannot mint 0");
        _mint(recipient, amount);
    }

    /**
     * @dev Overrides ERC20._beforeTokenTransfer() which get called on every transfers including
     * minting and burning. This ensures that Swap.updateUserWithdrawFees are called everytime.
     * This assumes the owner is set to a Swap contract's address.
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual override(ERC20Upgradeable) {
        super._beforeTokenTransfer(from, to, amount);
        require(to != address(this), "LPToken: cannot send to itself");
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

interface IAllowlist {
    function getPoolAccountLimit(address poolAddress)
        external
        view
        returns (uint256);

    function getPoolCap(address poolAddress) external view returns (uint256);

    function verifyAddress(address account, bytes32[] calldata merkleProof)
        external
        returns (bool);
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "./ISwap.sol";

interface IMetaSwap {
    // pool data view functions
    function getA() external view returns (uint256);

    function getToken(uint8 index) external view returns (IERC20);

    function getTokenIndex(address tokenAddress) external view returns (uint8);

    function getTokenBalance(uint8 index) external view returns (uint256);

    function getVirtualPrice() external view returns (uint256);

    function isGuarded() external view returns (bool);

    function metaSwapStorage()
        external
        view
        returns (
            address baseSwap,
            uint256 baseVirtualPrice,
            uint256 baseCacheLastUpdated
        );

    // min return calculation functions
    function calculateSwap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx
    ) external view returns (uint256);

    function calculateSwapUnderlying(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx
    ) external view returns (uint256);

    function calculateTokenAmount(uint256[] calldata amounts, bool deposit)
        external
        view
        returns (uint256);

    function calculateRemoveLiquidity(uint256 amount)
        external
        view
        returns (uint256[] memory);

    function calculateRemoveLiquidityOneToken(
        uint256 tokenAmount,
        uint8 tokenIndex
    ) external view returns (uint256 availableTokenAmount);

    // state modifying functions
    function initialize(
        IERC20[] memory _pooledTokens,
        uint8[] memory decimals,
        string memory lpTokenName,
        string memory lpTokenSymbol,
        uint256 _a,
        uint256 _fee,
        uint256 _adminFee,
        address lpTokenTargetAddress
    ) external;

    function initializeMetaSwap(
        IERC20[] memory _pooledTokens,
        uint8[] memory decimals,
        string memory lpTokenName,
        string memory lpTokenSymbol,
        uint256 _a,
        uint256 _fee,
        uint256 _adminFee,
        address lpTokenTargetAddress,
        ISwap baseSwap
    ) external;

    function swap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx,
        uint256 minDy,
        uint256 deadline
    ) external returns (uint256);

    function swapUnderlying(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx,
        uint256 minDy,
        uint256 deadline
    ) external returns (uint256);

    function addLiquidity(
        uint256[] calldata amounts,
        uint256 minToMint,
        uint256 deadline
    ) external returns (uint256);

    function removeLiquidity(
        uint256 amount,
        uint256[] calldata minAmounts,
        uint256 deadline
    ) external returns (uint256[] memory);

    function removeLiquidityOneToken(
        uint256 tokenAmount,
        uint8 tokenIndex,
        uint256 minAmount,
        uint256 deadline
    ) external returns (uint256);

    function removeLiquidityImbalance(
        uint256[] calldata amounts,
        uint256 maxBurnAmount,
        uint256 deadline
    ) external returns (uint256);
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "./IAllowlist.sol";

interface ISwap {
    // pool data view functions
    function getA() external view returns (uint256);

    function getAPrecise() external view returns (uint256);

    function getAllowlist() external view returns (IAllowlist);

    function getToken(uint8 index) external view returns (IERC20);

    function getTokenIndex(address tokenAddress) external view returns (uint8);

    function getTokenBalance(uint8 index) external view returns (uint256);

    function getVirtualPrice() external view returns (uint256);

    function owner() external view returns (address);

    function isGuarded() external view returns (bool);

    function paused() external view returns (bool);

    function swapStorage()
        external
        view
        returns (
            uint256,
            uint256,
            uint256,
            uint256,
            uint256,
            uint256,
            address
        );

    // min return calculation functions
    function calculateSwap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx
    ) external view returns (uint256);

    function calculateTokenAmount(uint256[] calldata amounts, bool deposit)
        external
        view
        returns (uint256);

    function calculateRemoveLiquidity(uint256 amount)
        external
        view
        returns (uint256[] memory);

    function calculateRemoveLiquidityOneToken(
        uint256 tokenAmount,
        uint8 tokenIndex
    ) external view returns (uint256 availableTokenAmount);

    // state modifying functions
    function initialize(
        IERC20[] memory pooledTokens,
        uint8[] memory decimals,
        string memory lpTokenName,
        string memory lpTokenSymbol,
        uint256 a,
        uint256 fee,
        uint256 adminFee,
        address lpTokenTargetAddress
    ) external;

    function swap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx,
        uint256 minDy,
        uint256 deadline
    ) external returns (uint256);

    function addLiquidity(
        uint256[] calldata amounts,
        uint256 minToMint,
        uint256 deadline
    ) external returns (uint256);

    function removeLiquidity(
        uint256 amount,
        uint256[] calldata minAmounts,
        uint256 deadline
    ) external returns (uint256[] memory);

    function removeLiquidityOneToken(
        uint256 tokenAmount,
        uint8 tokenIndex,
        uint256 minAmount,
        uint256 deadline
    ) external returns (uint256);

    function removeLiquidityImbalance(
        uint256[] calldata amounts,
        uint256 maxBurnAmount,
        uint256 deadline
    ) external returns (uint256);
}

{
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs",
    "useLiteralContent": true
  },
  "optimizer": {
    "enabled": true,
    "runs": 10000
  },
  "remappings": [],
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"uint256[]","name":"amounts","type":"uint256[]"},{"internalType":"uint256","name":"minToMint","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"}],"name":"addLiquidity","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"baseSwap","outputs":[{"internalType":"contract ISwap","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"baseTokens","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"calculateRemoveLiquidity","outputs":[{"internalType":"uint256[]","name":"","type":"uint256[]"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenAmount","type":"uint256"},{"internalType":"uint8","name":"tokenIndex","type":"uint8"}],"name":"calculateRemoveLiquidityOneToken","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint8","name":"tokenIndexFrom","type":"uint8"},{"internalType":"uint8","name":"tokenIndexTo","type":"uint8"},{"internalType":"uint256","name":"dx","type":"uint256"}],"name":"calculateSwap","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256[]","name":"amounts","type":"uint256[]"},{"internalType":"bool","name":"deposit","type":"bool"}],"name":"calculateTokenAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint8","name":"index","type":"uint8"}],"name":"getToken","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract ISwap","name":"_baseSwap","type":"address"},{"internalType":"contract IMetaSwap","name":"_metaSwap","type":"address"},{"internalType":"contract IERC20","name":"_metaLPToken","type":"address"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"metaLPToken","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"metaSwap","outputs":[{"internalType":"contract IMetaSwap","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"metaTokens","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256[]","name":"minAmounts","type":"uint256[]"},{"internalType":"uint256","name":"deadline","type":"uint256"}],"name":"removeLiquidity","outputs":[{"internalType":"uint256[]","name":"","type":"uint256[]"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256[]","name":"amounts","type":"uint256[]"},{"internalType":"uint256","name":"maxBurnAmount","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"}],"name":"removeLiquidityImbalance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenAmount","type":"uint256"},{"internalType":"uint8","name":"tokenIndex","type":"uint8"},{"internalType":"uint256","name":"minAmount","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"}],"name":"removeLiquidityOneToken","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint8","name":"tokenIndexFrom","type":"uint8"},{"internalType":"uint8","name":"tokenIndexTo","type":"uint8"},{"internalType":"uint256","name":"dx","type":"uint256"},{"internalType":"uint256","name":"minDy","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"}],"name":"swap","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"tokens","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"}]

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