Contract

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity =0.8.17;

// contracts
import "@openzeppelin/contracts/token/ERC20/extensions/draft-ERC20Permit.sol";

// libraries
import "@openzeppelin/contracts/utils/math/SafeCast.sol";
import "./libraries/SmardexLibrary.sol";
import "./libraries/TransferHelper.sol";

// interfaces
import "./interfaces/ISmardexPair.sol";
import "./interfaces/ISmardexFactory.sol";
import "./interfaces/ISmardexSwapCallback.sol";
import "./interfaces/ISmardexMintCallback.sol";

/**
 * @title SmardexPair
 * @notice Pair contract that allows user to swap 2 ERC20-strict tokens in a decentralised and automated way
 */
contract SmardexPair is ISmardexPair, ERC20Permit {
    using SafeCast for uint256;
    using SafeCast for int256;

    /**
     * @notice swap parameters used by function swap
     * @param amountCalculated return amount from getAmountIn/Out is always positive but to avoid too much cast, is int
     * @param fictiveReserveIn fictive reserve of the in-token of the pair
     * @param fictiveReserveOut fictive reserve of the out-token of the pair
     * @param priceAverageIn in-token ratio component of the price average
     * @param priceAverageOut out-token ratio component of the price average
     * @param token0 address of the token0
     * @param token1 address of the token1
     * @param balanceIn contract balance of the in-token
     * @param balanceOut contract balance of the out-token
     */
    struct SwapParams {
        int256 amountCalculated;
        uint256 fictiveReserveIn;
        uint256 fictiveReserveOut;
        uint256 priceAverageIn;
        uint256 priceAverageOut;
        address token0;
        address token1;
        uint256 balanceIn;
        uint256 balanceOut;
    }

    uint8 private constant CONTRACT_UNLOCKED = 1;
    uint8 private constant CONTRACT_LOCKED = 2;
    uint256 private constant MINIMUM_LIQUIDITY = 10 ** 3;
    bytes4 private constant AUTOSWAP_SELECTOR = bytes4(keccak256(bytes("executeWork(address,address)")));

    address public factory;
    address public token0;
    address public token1;

    // smardex new fictive reserves
    uint128 internal fictiveReserve0;
    uint128 internal fictiveReserve1; // accessible via getFictiveReserves()

    // moving average on the price
    uint128 internal priceAverage0;
    uint128 internal priceAverage1;
    uint40 internal priceAverageLastTimestamp; // accessible via getPriceAverage()

    // fee for FEE_POOL
    uint104 internal feeToAmount0;
    uint104 internal feeToAmount1; // accessible via getFees()

    // reentrancy
    uint8 private lockStatus = CONTRACT_UNLOCKED;

    modifier lock() {
        require(lockStatus == CONTRACT_UNLOCKED, "SmarDex: LOCKED");
        lockStatus = CONTRACT_LOCKED;
        _;
        lockStatus = CONTRACT_UNLOCKED;
    }

    constructor() ERC20("SmarDex LP-Token", "SDEX-LP") ERC20Permit("SmarDex LP-Token") {
        factory = msg.sender;
    }

    ///@inheritdoc ISmardexPair
    function initialize(address _token0, address _token1) external override {
        require(msg.sender == factory, "SmarDex: FORBIDDEN"); // sufficient check
        token0 = _token0;
        token1 = _token1;
    }

    ///@inheritdoc ISmardexPair
    function getReserves() external view override returns (uint256 reserve0_, uint256 reserve1_) {
        reserve0_ = IERC20(token0).balanceOf(address(this)) - feeToAmount0;
        reserve1_ = IERC20(token1).balanceOf(address(this)) - feeToAmount1;
    }

    ///@inheritdoc ISmardexPair
    function getFictiveReserves() external view override returns (uint256 fictiveReserve0_, uint256 fictiveReserve1_) {
        fictiveReserve0_ = fictiveReserve0;
        fictiveReserve1_ = fictiveReserve1;
    }

    ///@inheritdoc ISmardexPair
    function getFees() external view override returns (uint256 fees0_, uint256 fees1_) {
        fees0_ = feeToAmount0;
        fees1_ = feeToAmount1;
    }

    ///@inheritdoc ISmardexPair
    function getPriceAverage()
        external
        view
        returns (uint256 priceAverage0_, uint256 priceAverage1_, uint256 priceAverageLastTimestamp_)
    {
        priceAverage0_ = priceAverage0;
        priceAverage1_ = priceAverage1;
        priceAverageLastTimestamp_ = priceAverageLastTimestamp;
    }

    ///@inheritdoc ISmardexPair
    function getUpdatedPriceAverage(
        uint256 _fictiveReserveIn,
        uint256 _fictiveReserveOut,
        uint256 _priceAverageLastTimestamp,
        uint256 _priceAverageIn,
        uint256 _priceAverageOut,
        uint256 _currentTimestamp
    ) public pure returns (uint256 priceAverageIn_, uint256 priceAverageOut_) {
        (priceAverageIn_, priceAverageOut_) = SmardexLibrary.getUpdatedPriceAverage(
            _fictiveReserveIn,
            _fictiveReserveOut,
            _priceAverageLastTimestamp,
            _priceAverageIn,
            _priceAverageOut,
            _currentTimestamp
        );
    }

    ///@inheritdoc ISmardexPair
    function mint(
        address _to,
        uint256 _amount0,
        uint256 _amount1,
        address _payer
    ) external override returns (uint256 liquidity_) {
        liquidity_ = _mintBeforeFee(_to, _amount0, _amount1, _payer);

        // we call feeTo out of the internal locked mint (_mintExt) function to be able to swap fees in here
        _feeToSwap();
    }

    ///@inheritdoc ISmardexPair
    function burn(address _to) external override returns (uint256 amount0_, uint256 amount1_) {
        (amount0_, amount1_) = _burnBeforeFee(_to);

        // we call feeTo out of the internal locked burn (_burnExt) function to be able to swap fees in here
        _feeToSwap();
    }

    ///@inheritdoc ISmardexPair
    function swap(
        address _to,
        bool _zeroForOne,
        int256 _amountSpecified,
        bytes calldata _data
    ) external override lock returns (int256 amount0_, int256 amount1_) {
        require(_amountSpecified != 0, "SmarDex: ZERO_AMOUNT");

        SwapParams memory _params = SwapParams({
            amountCalculated: 0,
            fictiveReserveIn: 0,
            fictiveReserveOut: 0,
            priceAverageIn: 0,
            priceAverageOut: 0,
            token0: token0,
            token1: token1,
            balanceIn: 0,
            balanceOut: 0
        });

        (
            _params.balanceIn,
            _params.balanceOut,
            _params.fictiveReserveIn,
            _params.fictiveReserveOut,
            _params.priceAverageIn,
            _params.priceAverageOut
        ) = _zeroForOne
            ? (
                IERC20(_params.token0).balanceOf(address(this)) - feeToAmount0,
                IERC20(_params.token1).balanceOf(address(this)) - feeToAmount1,
                fictiveReserve0,
                fictiveReserve1,
                priceAverage0,
                priceAverage1
            )
            : (
                IERC20(_params.token1).balanceOf(address(this)) - feeToAmount1,
                IERC20(_params.token0).balanceOf(address(this)) - feeToAmount0,
                fictiveReserve1,
                fictiveReserve0,
                priceAverage1,
                priceAverage0
            );

        // compute new price average
        (_params.priceAverageIn, _params.priceAverageOut) = SmardexLibrary.getUpdatedPriceAverage(
            _params.fictiveReserveIn,
            _params.fictiveReserveOut,
            priceAverageLastTimestamp,
            _params.priceAverageIn,
            _params.priceAverageOut,
            block.timestamp
        );

        // SSTORE new price average
        (priceAverage0, priceAverage1, priceAverageLastTimestamp) = _zeroForOne
            ? (_params.priceAverageIn.toUint128(), _params.priceAverageOut.toUint128(), uint40(block.timestamp))
            : (_params.priceAverageOut.toUint128(), _params.priceAverageIn.toUint128(), uint40(block.timestamp));

        if (_amountSpecified > 0) {
            uint256 _temp;
            (_temp, , , _params.fictiveReserveIn, _params.fictiveReserveOut) = SmardexLibrary.getAmountOut(
                _amountSpecified.toUint256(),
                _params.balanceIn,
                _params.balanceOut,
                _params.fictiveReserveIn,
                _params.fictiveReserveOut,
                _params.priceAverageIn,
                _params.priceAverageOut
            );
            _params.amountCalculated = _temp.toInt256();
        } else {
            uint256 _temp;
            (_temp, , , _params.fictiveReserveIn, _params.fictiveReserveOut) = SmardexLibrary.getAmountIn(
                (-_amountSpecified).toUint256(),
                _params.balanceIn,
                _params.balanceOut,
                _params.fictiveReserveIn,
                _params.fictiveReserveOut,
                _params.priceAverageIn,
                _params.priceAverageOut
            );
            _params.amountCalculated = _temp.toInt256();
        }

        (amount0_, amount1_) = _zeroForOne
            ? (
                _amountSpecified > 0
                    ? (_amountSpecified, -_params.amountCalculated)
                    : (_params.amountCalculated, _amountSpecified)
            )
            : (
                _amountSpecified > 0
                    ? (-_params.amountCalculated, _amountSpecified)
                    : (_amountSpecified, _params.amountCalculated)
            );

        require(_to != _params.token0 && _to != _params.token1, "SmarDex: INVALID_TO");
        if (_zeroForOne) {
            if (amount1_ < 0) {
                TransferHelper.safeTransfer(_params.token1, _to, uint256(-amount1_));
            }
            ISmardexSwapCallback(msg.sender).smardexSwapCallback(amount0_, amount1_, _data);
            uint256 _balanceInBefore = _params.balanceIn;
            _params.balanceIn = IERC20(token0).balanceOf(address(this));
            require(
                _balanceInBefore + feeToAmount0 + (amount0_).toUint256() <= _params.balanceIn,
                "SmarDex: INSUFFICIENT_TOKEN0_INPUT_AMOUNT"
            );
            _params.balanceOut = IERC20(token1).balanceOf(address(this));
        } else {
            if (amount0_ < 0) {
                TransferHelper.safeTransfer(_params.token0, _to, uint256(-amount0_));
            }
            ISmardexSwapCallback(msg.sender).smardexSwapCallback(amount0_, amount1_, _data);
            uint256 _balanceInBefore = _params.balanceIn;
            _params.balanceIn = IERC20(token1).balanceOf(address(this));
            require(
                _balanceInBefore + feeToAmount1 + (amount1_).toUint256() <= _params.balanceIn,
                "SmarDex: INSUFFICIENT_TOKEN1_INPUT_AMOUNT"
            );
            _params.balanceOut = IERC20(token0).balanceOf(address(this));
        }

        // update feeTopart
        bool _feeOn = ISmardexFactory(factory).feeTo() != address(0);
        if (_zeroForOne) {
            if (_feeOn) {
                feeToAmount0 += ((uint256(amount0_) * SmardexLibrary.FEES_POOL) / SmardexLibrary.FEES_BASE).toUint104();
            }
            _update(
                _params.balanceIn,
                _params.balanceOut,
                _params.fictiveReserveIn,
                _params.fictiveReserveOut,
                _params.priceAverageIn,
                _params.priceAverageOut
            );
        } else {
            if (_feeOn) {
                feeToAmount1 += ((uint256(amount1_) * SmardexLibrary.FEES_POOL) / SmardexLibrary.FEES_BASE).toUint104();
            }
            _update(
                _params.balanceOut,
                _params.balanceIn,
                _params.fictiveReserveOut,
                _params.fictiveReserveIn,
                _params.priceAverageOut,
                _params.priceAverageIn
            );
        }

        emit Swap(msg.sender, _to, amount0_, amount1_);
    }

    /**
     * @notice update fictive reserves and emit the Sync event
     * @param _balance0 the new balance of token0
     * @param _balance1 the new balance of token1
     * @param _fictiveReserve0 the new fictive reserves of token0
     * @param _fictiveReserve1 the new fictive reserves of token1
     * @param _priceAverage0 the new priceAverage of token0
     * @param _priceAverage1 the new priceAverage of token1
     */
    function _update(
        uint256 _balance0,
        uint256 _balance1,
        uint256 _fictiveReserve0,
        uint256 _fictiveReserve1,
        uint256 _priceAverage0,
        uint256 _priceAverage1
    ) private {
        require(_fictiveReserve0 > 0 && _fictiveReserve1 > 0, "SmarDex: FICTIVE_RESERVES_TOO_LOW");
        require(_fictiveReserve0 <= type(uint128).max && _fictiveReserve1 <= type(uint128).max, "SmarDex: OVERFLOW");
        fictiveReserve0 = uint128(_fictiveReserve0);
        fictiveReserve1 = uint128(_fictiveReserve1);

        emit Sync(
            _balance0 - feeToAmount0,
            _balance1 - feeToAmount1,
            _fictiveReserve0,
            _fictiveReserve1,
            _priceAverage0,
            _priceAverage1
        );
    }

    /**
     * @notice transfers feeToAmount of tokens 0 and 1 to feeTo, and reset feeToAmounts
     * @return feeOn_ if part of the fees goes to feeTo
     */
    function _mintFee() private returns (bool feeOn_) {
        address _feeTo = ISmardexFactory(factory).feeTo();
        feeOn_ = _feeTo != address(0);
        if (feeOn_) {
            // gas saving
            uint256 _feeToAmount0 = feeToAmount0;
            uint256 _feeToAmount1 = feeToAmount1;

            if (_feeToAmount0 > 0) {
                TransferHelper.safeTransfer(token0, _feeTo, _feeToAmount0);
                feeToAmount0 = 0;
            }
            if (_feeToAmount1 > 0) {
                TransferHelper.safeTransfer(token1, _feeTo, _feeToAmount1);
                feeToAmount1 = 0;
            }
        } else {
            feeToAmount0 = 0;
            feeToAmount1 = 0;
        }
    }

    /**
     * @notice Mint lp tokens proportionally of added tokens in balance.
     * @param _to address who will receive minted tokens
     * @param _amount0 amount of token0 to provide
     * @param _amount1 amount of token1 to provide
     * @param _payer address of the payer to provide token for the mint
     * @return liquidity_ amount of lp tokens minted and sent to the address defined in parameter
     */
    function _mintBeforeFee(
        address _to,
        uint256 _amount0,
        uint256 _amount1,
        address _payer
    ) internal lock returns (uint256 liquidity_) {
        _mintFee();

        uint256 _fictiveReserve0;
        uint256 _fictiveReserve1;

        // gas saving
        uint256 _balance0 = IERC20(token0).balanceOf(address(this));
        uint256 _balance1 = IERC20(token1).balanceOf(address(this));
        uint256 _totalSupply = totalSupply();

        ISmardexMintCallback(msg.sender).smardexMintCallback(
            ISmardexMintCallback.MintCallbackData({
                token0: token0,
                token1: token1,
                amount0: _amount0,
                amount1: _amount1,
                payer: _payer
            })
        );

        // gas savings
        uint256 _balance0after = IERC20(token0).balanceOf(address(this));
        uint256 _balance1after = IERC20(token1).balanceOf(address(this));

        require(_balance0after >= _balance0 + _amount0, "SmarDex: INSUFFICIENT_AMOUNT_0");
        require(_balance1after >= _balance1 + _amount1, "SmarDex: INSUFFICIENT_AMOUNT_1");

        if (_totalSupply == 0) {
            liquidity_ = Math.sqrt(_amount0 * _amount1) - MINIMUM_LIQUIDITY;
            _mint(address(0xdead), MINIMUM_LIQUIDITY); // permanently lock the first MINIMUM_LIQUIDITY tokens
            _fictiveReserve0 = _balance0after / 2;
            _fictiveReserve1 = _balance1after / 2;
        } else {
            liquidity_ = Math.min((_amount0 * _totalSupply) / _balance0, (_amount1 * _totalSupply) / _balance1);

            // update proportionally the fictiveReserves
            _fictiveReserve0 = (fictiveReserve0 * (_totalSupply + liquidity_)) / _totalSupply;
            _fictiveReserve1 = (fictiveReserve1 * (_totalSupply + liquidity_)) / _totalSupply;
        }

        require(liquidity_ > 0, "SmarDex: INSUFFICIENT_LIQUIDITY_MINTED");
        _mint(_to, liquidity_);

        _update(_balance0after, _balance1after, _fictiveReserve0, _fictiveReserve1, priceAverage0, priceAverage1);

        emit Mint(msg.sender, _to, _amount0, _amount1);
    }

    /**
     * @notice Burn lp tokens in the balance of the contract. Sends to the defined address the amount of token0 and
     * token1 proportionally of the amount burned.
     * @param _to address who will receive tokens
     * @return amount0_ amount of token0 sent to the address defined in parameter
     * @return amount1_ amount of token0 sent to the address defined in parameter
     */
    function _burnBeforeFee(address _to) internal lock returns (uint256 amount0_, uint256 amount1_) {
        _mintFee();

        // gas savings
        address _token0 = token0;
        address _token1 = token1;
        uint256 _balance0 = IERC20(_token0).balanceOf(address(this));
        uint256 _balance1 = IERC20(_token1).balanceOf(address(this));
        uint256 _liquidity = balanceOf(address(this));
        uint256 _totalSupply = totalSupply();

        // pro-rata distribution
        amount0_ = (_liquidity * _balance0) / _totalSupply;
        amount1_ = (_liquidity * _balance1) / _totalSupply;
        require(amount0_ > 0 && amount1_ > 0, "SmarDex: INSUFFICIENT_LIQUIDITY_BURNED");

        // update proportionally the fictiveReserves
        uint256 _fictiveReserve0 = fictiveReserve0;
        uint256 _fictiveReserve1 = fictiveReserve1;
        _fictiveReserve0 -= (_fictiveReserve0 * _liquidity) / _totalSupply;
        _fictiveReserve1 -= (_fictiveReserve1 * _liquidity) / _totalSupply;

        _burn(address(this), _liquidity);
        TransferHelper.safeTransfer(_token0, _to, amount0_);
        TransferHelper.safeTransfer(_token1, _to, amount1_);

        _balance0 = IERC20(_token0).balanceOf(address(this));
        _balance1 = IERC20(_token1).balanceOf(address(this));

        _update(_balance0, _balance1, _fictiveReserve0, _fictiveReserve1, priceAverage0, priceAverage1);

        emit Burn(msg.sender, _to, amount0_, amount1_);
    }

    /**
     * @notice execute function "executeWork(address,address)" of the feeTo contract. Doesn't revert tx if it reverts
     */
    function _feeToSwap() internal {
        address _feeTo = ISmardexFactory(factory).feeTo();

        // call contract destination for handling fees
        // We don't handle return values so it does not revert for LP if something went wrong in feeTo
        _feeTo.call(abi.encodeWithSelector(AUTOSWAP_SELECTOR, token0, token1));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/extensions/draft-ERC20Permit.sol)

pragma solidity ^0.8.0;

import "./draft-IERC20Permit.sol";
import "../ERC20.sol";
import "../../../utils/cryptography/ECDSA.sol";
import "../../../utils/cryptography/EIP712.sol";
import "../../../utils/Counters.sol";

/**
 * @dev Implementation of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * _Available since v3.4._
 */
abstract contract ERC20Permit is ERC20, IERC20Permit, EIP712 {
    using Counters for Counters.Counter;

    mapping(address => Counters.Counter) private _nonces;

    // solhint-disable-next-line var-name-mixedcase
    bytes32 private constant _PERMIT_TYPEHASH =
        keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
    /**
     * @dev In previous versions `_PERMIT_TYPEHASH` was declared as `immutable`.
     * However, to ensure consistency with the upgradeable transpiler, we will continue
     * to reserve a slot.
     * @custom:oz-renamed-from _PERMIT_TYPEHASH
     */
    // solhint-disable-next-line var-name-mixedcase
    bytes32 private _PERMIT_TYPEHASH_DEPRECATED_SLOT;

    /**
     * @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `"1"`.
     *
     * It's a good idea to use the same `name` that is defined as the ERC20 token name.
     */
    constructor(string memory name) EIP712(name, "1") {}

    /**
     * @dev See {IERC20Permit-permit}.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual override {
        require(block.timestamp <= deadline, "ERC20Permit: expired deadline");

        bytes32 structHash = keccak256(abi.encode(_PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));

        bytes32 hash = _hashTypedDataV4(structHash);

        address signer = ECDSA.recover(hash, v, r, s);
        require(signer == owner, "ERC20Permit: invalid signature");

        _approve(owner, spender, value);
    }

    /**
     * @dev See {IERC20Permit-nonces}.
     */
    function nonces(address owner) public view virtual override returns (uint256) {
        return _nonces[owner].current();
    }

    /**
     * @dev See {IERC20Permit-DOMAIN_SEPARATOR}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view override returns (bytes32) {
        return _domainSeparatorV4();
    }

    /**
     * @dev "Consume a nonce": return the current value and increment.
     *
     * _Available since v4.1._
     */
    function _useNonce(address owner) internal virtual returns (uint256 current) {
        Counters.Counter storage nonce = _nonces[owner];
        current = nonce.current();
        nonce.increment();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)

pragma solidity ^0.8.0;

/**
 * @title Counters
 * @author Matt Condon (@shrugs)
 * @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
 * of elements in a mapping, issuing ERC721 ids, or counting request ids.
 *
 * Include with `using Counters for Counters.Counter;`
 */
library Counters {
    struct Counter {
        // This variable should never be directly accessed by users of the library: interactions must be restricted to
        // the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
        // this feature: see https://github.com/ethereum/solidity/issues/4637
        uint256 _value; // default: 0
    }

    function current(Counter storage counter) internal view returns (uint256) {
        return counter._value;
    }

    function increment(Counter storage counter) internal {
        unchecked {
            counter._value += 1;
        }
    }

    function decrement(Counter storage counter) internal {
        uint256 value = counter._value;
        require(value > 0, "Counter: decrement overflow");
        unchecked {
            counter._value = value - 1;
        }
    }

    function reset(Counter storage counter) internal {
        counter._value = 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.0;

import "../Strings.sol";

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS,
        InvalidSignatureV // Deprecated in v4.8
    }

    function _throwError(RecoverError error) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert("ECDSA: invalid signature");
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert("ECDSA: invalid signature length");
        } else if (error == RecoverError.InvalidSignatureS) {
            revert("ECDSA: invalid signature 's' value");
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature` or error string. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength);
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, signature);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address, RecoverError) {
        bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
        uint8 v = uint8((uint256(vs) >> 255) + 27);
        return tryRecover(hash, v, r, s);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     *
     * _Available since v4.2._
     */
    function recover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, r, vs);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature);
        }

        return (signer, RecoverError.NoError);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from a `hash`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
        // 32 is the length in bytes of hash,
        // enforced by the type signature above
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from `s`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
    }

    /**
     * @dev Returns an Ethereum Signed Typed Data, created from a
     * `domainSeparator` and a `structHash`. This produces hash corresponding
     * to the one signed with the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
     * JSON-RPC method as part of EIP-712.
     *
     * See {recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/cryptography/EIP712.sol)

pragma solidity ^0.8.0;

import "./ECDSA.sol";

/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
 * thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
 * they need in their contracts using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * _Available since v3.4._
 */
abstract contract EIP712 {
    /* solhint-disable var-name-mixedcase */
    // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
    // invalidate the cached domain separator if the chain id changes.
    bytes32 private immutable _CACHED_DOMAIN_SEPARATOR;
    uint256 private immutable _CACHED_CHAIN_ID;
    address private immutable _CACHED_THIS;

    bytes32 private immutable _HASHED_NAME;
    bytes32 private immutable _HASHED_VERSION;
    bytes32 private immutable _TYPE_HASH;

    /* solhint-enable var-name-mixedcase */

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    constructor(string memory name, string memory version) {
        bytes32 hashedName = keccak256(bytes(name));
        bytes32 hashedVersion = keccak256(bytes(version));
        bytes32 typeHash = keccak256(
            "EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"
        );
        _HASHED_NAME = hashedName;
        _HASHED_VERSION = hashedVersion;
        _CACHED_CHAIN_ID = block.chainid;
        _CACHED_DOMAIN_SEPARATOR = _buildDomainSeparator(typeHash, hashedName, hashedVersion);
        _CACHED_THIS = address(this);
        _TYPE_HASH = typeHash;
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        if (address(this) == _CACHED_THIS && block.chainid == _CACHED_CHAIN_ID) {
            return _CACHED_DOMAIN_SEPARATOR;
        } else {
            return _buildDomainSeparator(_TYPE_HASH, _HASHED_NAME, _HASHED_VERSION);
        }
    }

    function _buildDomainSeparator(
        bytes32 typeHash,
        bytes32 nameHash,
        bytes32 versionHash
    ) private view returns (bytes32) {
        return keccak256(abi.encode(typeHash, nameHash, versionHash, block.chainid, address(this)));
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return ECDSA.toTypedDataHash(_domainSeparatorV4(), structHash);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10**64) {
                value /= 10**64;
                result += 64;
            }
            if (value >= 10**32) {
                value /= 10**32;
                result += 32;
            }
            if (value >= 10**16) {
                value /= 10**16;
                result += 16;
            }
            if (value >= 10**8) {
                value /= 10**8;
                result += 8;
            }
            if (value >= 10**4) {
                value /= 10**4;
                result += 4;
            }
            if (value >= 10**2) {
                value /= 10**2;
                result += 2;
            }
            if (value >= 10**1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SafeCast.sol)
// This file was procedurally generated from scripts/generate/templates/SafeCast.js.

pragma solidity ^0.8.0;

/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 *
 * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
 * all math on `uint256` and `int256` and then downcasting.
 */
library SafeCast {
    /**
     * @dev Returns the downcasted uint248 from uint256, reverting on
     * overflow (when the input is greater than largest uint248).
     *
     * Counterpart to Solidity's `uint248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     *
     * _Available since v4.7._
     */
    function toUint248(uint256 value) internal pure returns (uint248) {
        require(value <= type(uint248).max, "SafeCast: value doesn't fit in 248 bits");
        return uint248(value);
    }

    /**
     * @dev Returns the downcasted uint240 from uint256, reverting on
     * overflow (when the input is greater than largest uint240).
     *
     * Counterpart to Solidity's `uint240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     *
     * _Available since v4.7._
     */
    function toUint240(uint256 value) internal pure returns (uint240) {
        require(value <= type(uint240).max, "SafeCast: value doesn't fit in 240 bits");
        return uint240(value);
    }

    /**
     * @dev Returns the downcasted uint232 from uint256, reverting on
     * overflow (when the input is greater than largest uint232).
     *
     * Counterpart to Solidity's `uint232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     *
     * _Available since v4.7._
     */
    function toUint232(uint256 value) internal pure returns (uint232) {
        require(value <= type(uint232).max, "SafeCast: value doesn't fit in 232 bits");
        return uint232(value);
    }

    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     *
     * _Available since v4.2._
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint216 from uint256, reverting on
     * overflow (when the input is greater than largest uint216).
     *
     * Counterpart to Solidity's `uint216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     *
     * _Available since v4.7._
     */
    function toUint216(uint256 value) internal pure returns (uint216) {
        require(value <= type(uint216).max, "SafeCast: value doesn't fit in 216 bits");
        return uint216(value);
    }

    /**
     * @dev Returns the downcasted uint208 from uint256, reverting on
     * overflow (when the input is greater than largest uint208).
     *
     * Counterpart to Solidity's `uint208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     *
     * _Available since v4.7._
     */
    function toUint208(uint256 value) internal pure returns (uint208) {
        require(value <= type(uint208).max, "SafeCast: value doesn't fit in 208 bits");
        return uint208(value);
    }

    /**
     * @dev Returns the downcasted uint200 from uint256, reverting on
     * overflow (when the input is greater than largest uint200).
     *
     * Counterpart to Solidity's `uint200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     *
     * _Available since v4.7._
     */
    function toUint200(uint256 value) internal pure returns (uint200) {
        require(value <= type(uint200).max, "SafeCast: value doesn't fit in 200 bits");
        return uint200(value);
    }

    /**
     * @dev Returns the downcasted uint192 from uint256, reverting on
     * overflow (when the input is greater than largest uint192).
     *
     * Counterpart to Solidity's `uint192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     *
     * _Available since v4.7._
     */
    function toUint192(uint256 value) internal pure returns (uint192) {
        require(value <= type(uint192).max, "SafeCast: value doesn't fit in 192 bits");
        return uint192(value);
    }

    /**
     * @dev Returns the downcasted uint184 from uint256, reverting on
     * overflow (when the input is greater than largest uint184).
     *
     * Counterpart to Solidity's `uint184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     *
     * _Available since v4.7._
     */
    function toUint184(uint256 value) internal pure returns (uint184) {
        require(value <= type(uint184).max, "SafeCast: value doesn't fit in 184 bits");
        return uint184(value);
    }

    /**
     * @dev Returns the downcasted uint176 from uint256, reverting on
     * overflow (when the input is greater than largest uint176).
     *
     * Counterpart to Solidity's `uint176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     *
     * _Available since v4.7._
     */
    function toUint176(uint256 value) internal pure returns (uint176) {
        require(value <= type(uint176).max, "SafeCast: value doesn't fit in 176 bits");
        return uint176(value);
    }

    /**
     * @dev Returns the downcasted uint168 from uint256, reverting on
     * overflow (when the input is greater than largest uint168).
     *
     * Counterpart to Solidity's `uint168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     *
     * _Available since v4.7._
     */
    function toUint168(uint256 value) internal pure returns (uint168) {
        require(value <= type(uint168).max, "SafeCast: value doesn't fit in 168 bits");
        return uint168(value);
    }

    /**
     * @dev Returns the downcasted uint160 from uint256, reverting on
     * overflow (when the input is greater than largest uint160).
     *
     * Counterpart to Solidity's `uint160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     *
     * _Available since v4.7._
     */
    function toUint160(uint256 value) internal pure returns (uint160) {
        require(value <= type(uint160).max, "SafeCast: value doesn't fit in 160 bits");
        return uint160(value);
    }

    /**
     * @dev Returns the downcasted uint152 from uint256, reverting on
     * overflow (when the input is greater than largest uint152).
     *
     * Counterpart to Solidity's `uint152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     *
     * _Available since v4.7._
     */
    function toUint152(uint256 value) internal pure returns (uint152) {
        require(value <= type(uint152).max, "SafeCast: value doesn't fit in 152 bits");
        return uint152(value);
    }

    /**
     * @dev Returns the downcasted uint144 from uint256, reverting on
     * overflow (when the input is greater than largest uint144).
     *
     * Counterpart to Solidity's `uint144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     *
     * _Available since v4.7._
     */
    function toUint144(uint256 value) internal pure returns (uint144) {
        require(value <= type(uint144).max, "SafeCast: value doesn't fit in 144 bits");
        return uint144(value);
    }

    /**
     * @dev Returns the downcasted uint136 from uint256, reverting on
     * overflow (when the input is greater than largest uint136).
     *
     * Counterpart to Solidity's `uint136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     *
     * _Available since v4.7._
     */
    function toUint136(uint256 value) internal pure returns (uint136) {
        require(value <= type(uint136).max, "SafeCast: value doesn't fit in 136 bits");
        return uint136(value);
    }

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v2.5._
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint120 from uint256, reverting on
     * overflow (when the input is greater than largest uint120).
     *
     * Counterpart to Solidity's `uint120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     *
     * _Available since v4.7._
     */
    function toUint120(uint256 value) internal pure returns (uint120) {
        require(value <= type(uint120).max, "SafeCast: value doesn't fit in 120 bits");
        return uint120(value);
    }

    /**
     * @dev Returns the downcasted uint112 from uint256, reverting on
     * overflow (when the input is greater than largest uint112).
     *
     * Counterpart to Solidity's `uint112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     *
     * _Available since v4.7._
     */
    function toUint112(uint256 value) internal pure returns (uint112) {
        require(value <= type(uint112).max, "SafeCast: value doesn't fit in 112 bits");
        return uint112(value);
    }

    /**
     * @dev Returns the downcasted uint104 from uint256, reverting on
     * overflow (when the input is greater than largest uint104).
     *
     * Counterpart to Solidity's `uint104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     *
     * _Available since v4.7._
     */
    function toUint104(uint256 value) internal pure returns (uint104) {
        require(value <= type(uint104).max, "SafeCast: value doesn't fit in 104 bits");
        return uint104(value);
    }

    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     *
     * _Available since v4.2._
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
        return uint96(value);
    }

    /**
     * @dev Returns the downcasted uint88 from uint256, reverting on
     * overflow (when the input is greater than largest uint88).
     *
     * Counterpart to Solidity's `uint88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     *
     * _Available since v4.7._
     */
    function toUint88(uint256 value) internal pure returns (uint88) {
        require(value <= type(uint88).max, "SafeCast: value doesn't fit in 88 bits");
        return uint88(value);
    }

    /**
     * @dev Returns the downcasted uint80 from uint256, reverting on
     * overflow (when the input is greater than largest uint80).
     *
     * Counterpart to Solidity's `uint80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     *
     * _Available since v4.7._
     */
    function toUint80(uint256 value) internal pure returns (uint80) {
        require(value <= type(uint80).max, "SafeCast: value doesn't fit in 80 bits");
        return uint80(value);
    }

    /**
     * @dev Returns the downcasted uint72 from uint256, reverting on
     * overflow (when the input is greater than largest uint72).
     *
     * Counterpart to Solidity's `uint72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     *
     * _Available since v4.7._
     */
    function toUint72(uint256 value) internal pure returns (uint72) {
        require(value <= type(uint72).max, "SafeCast: value doesn't fit in 72 bits");
        return uint72(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v2.5._
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint56 from uint256, reverting on
     * overflow (when the input is greater than largest uint56).
     *
     * Counterpart to Solidity's `uint56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     *
     * _Available since v4.7._
     */
    function toUint56(uint256 value) internal pure returns (uint56) {
        require(value <= type(uint56).max, "SafeCast: value doesn't fit in 56 bits");
        return uint56(value);
    }

    /**
     * @dev Returns the downcasted uint48 from uint256, reverting on
     * overflow (when the input is greater than largest uint48).
     *
     * Counterpart to Solidity's `uint48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     *
     * _Available since v4.7._
     */
    function toUint48(uint256 value) internal pure returns (uint48) {
        require(value <= type(uint48).max, "SafeCast: value doesn't fit in 48 bits");
        return uint48(value);
    }

    /**
     * @dev Returns the downcasted uint40 from uint256, reverting on
     * overflow (when the input is greater than largest uint40).
     *
     * Counterpart to Solidity's `uint40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     *
     * _Available since v4.7._
     */
    function toUint40(uint256 value) internal pure returns (uint40) {
        require(value <= type(uint40).max, "SafeCast: value doesn't fit in 40 bits");
        return uint40(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v2.5._
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint24 from uint256, reverting on
     * overflow (when the input is greater than largest uint24).
     *
     * Counterpart to Solidity's `uint24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     *
     * _Available since v4.7._
     */
    function toUint24(uint256 value) internal pure returns (uint24) {
        require(value <= type(uint24).max, "SafeCast: value doesn't fit in 24 bits");
        return uint24(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v2.5._
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     *
     * _Available since v2.5._
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     *
     * _Available since v3.0._
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        require(value >= 0, "SafeCast: value must be positive");
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int248 from int256, reverting on
     * overflow (when the input is less than smallest int248 or
     * greater than largest int248).
     *
     * Counterpart to Solidity's `int248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     *
     * _Available since v4.7._
     */
    function toInt248(int256 value) internal pure returns (int248 downcasted) {
        downcasted = int248(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 248 bits");
    }

    /**
     * @dev Returns the downcasted int240 from int256, reverting on
     * overflow (when the input is less than smallest int240 or
     * greater than largest int240).
     *
     * Counterpart to Solidity's `int240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     *
     * _Available since v4.7._
     */
    function toInt240(int256 value) internal pure returns (int240 downcasted) {
        downcasted = int240(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 240 bits");
    }

    /**
     * @dev Returns the downcasted int232 from int256, reverting on
     * overflow (when the input is less than smallest int232 or
     * greater than largest int232).
     *
     * Counterpart to Solidity's `int232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     *
     * _Available since v4.7._
     */
    function toInt232(int256 value) internal pure returns (int232 downcasted) {
        downcasted = int232(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 232 bits");
    }

    /**
     * @dev Returns the downcasted int224 from int256, reverting on
     * overflow (when the input is less than smallest int224 or
     * greater than largest int224).
     *
     * Counterpart to Solidity's `int224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     *
     * _Available since v4.7._
     */
    function toInt224(int256 value) internal pure returns (int224 downcasted) {
        downcasted = int224(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 224 bits");
    }

    /**
     * @dev Returns the downcasted int216 from int256, reverting on
     * overflow (when the input is less than smallest int216 or
     * greater than largest int216).
     *
     * Counterpart to Solidity's `int216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     *
     * _Available since v4.7._
     */
    function toInt216(int256 value) internal pure returns (int216 downcasted) {
        downcasted = int216(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 216 bits");
    }

    /**
     * @dev Returns the downcasted int208 from int256, reverting on
     * overflow (when the input is less than smallest int208 or
     * greater than largest int208).
     *
     * Counterpart to Solidity's `int208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     *
     * _Available since v4.7._
     */
    function toInt208(int256 value) internal pure returns (int208 downcasted) {
        downcasted = int208(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 208 bits");
    }

    /**
     * @dev Returns the downcasted int200 from int256, reverting on
     * overflow (when the input is less than smallest int200 or
     * greater than largest int200).
     *
     * Counterpart to Solidity's `int200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     *
     * _Available since v4.7._
     */
    function toInt200(int256 value) internal pure returns (int200 downcasted) {
        downcasted = int200(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 200 bits");
    }

    /**
     * @dev Returns the downcasted int192 from int256, reverting on
     * overflow (when the input is less than smallest int192 or
     * greater than largest int192).
     *
     * Counterpart to Solidity's `int192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     *
     * _Available since v4.7._
     */
    function toInt192(int256 value) internal pure returns (int192 downcasted) {
        downcasted = int192(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 192 bits");
    }

    /**
     * @dev Returns the downcasted int184 from int256, reverting on
     * overflow (when the input is less than smallest int184 or
     * greater than largest int184).
     *
     * Counterpart to Solidity's `int184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     *
     * _Available since v4.7._
     */
    function toInt184(int256 value) internal pure returns (int184 downcasted) {
        downcasted = int184(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 184 bits");
    }

    /**
     * @dev Returns the downcasted int176 from int256, reverting on
     * overflow (when the input is less than smallest int176 or
     * greater than largest int176).
     *
     * Counterpart to Solidity's `int176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     *
     * _Available since v4.7._
     */
    function toInt176(int256 value) internal pure returns (int176 downcasted) {
        downcasted = int176(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 176 bits");
    }

    /**
     * @dev Returns the downcasted int168 from int256, reverting on
     * overflow (when the input is less than smallest int168 or
     * greater than largest int168).
     *
     * Counterpart to Solidity's `int168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     *
     * _Available since v4.7._
     */
    function toInt168(int256 value) internal pure returns (int168 downcasted) {
        downcasted = int168(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 168 bits");
    }

    /**
     * @dev Returns the downcasted int160 from int256, reverting on
     * overflow (when the input is less than smallest int160 or
     * greater than largest int160).
     *
     * Counterpart to Solidity's `int160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     *
     * _Available since v4.7._
     */
    function toInt160(int256 value) internal pure returns (int160 downcasted) {
        downcasted = int160(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 160 bits");
    }

    /**
     * @dev Returns the downcasted int152 from int256, reverting on
     * overflow (when the input is less than smallest int152 or
     * greater than largest int152).
     *
     * Counterpart to Solidity's `int152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     *
     * _Available since v4.7._
     */
    function toInt152(int256 value) internal pure returns (int152 downcasted) {
        downcasted = int152(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 152 bits");
    }

    /**
     * @dev Returns the downcasted int144 from int256, reverting on
     * overflow (when the input is less than smallest int144 or
     * greater than largest int144).
     *
     * Counterpart to Solidity's `int144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     *
     * _Available since v4.7._
     */
    function toInt144(int256 value) internal pure returns (int144 downcasted) {
        downcasted = int144(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 144 bits");
    }

    /**
     * @dev Returns the downcasted int136 from int256, reverting on
     * overflow (when the input is less than smallest int136 or
     * greater than largest int136).
     *
     * Counterpart to Solidity's `int136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     *
     * _Available since v4.7._
     */
    function toInt136(int256 value) internal pure returns (int136 downcasted) {
        downcasted = int136(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 136 bits");
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v3.1._
     */
    function toInt128(int256 value) internal pure returns (int128 downcasted) {
        downcasted = int128(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 128 bits");
    }

    /**
     * @dev Returns the downcasted int120 from int256, reverting on
     * overflow (when the input is less than smallest int120 or
     * greater than largest int120).
     *
     * Counterpart to Solidity's `int120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     *
     * _Available since v4.7._
     */
    function toInt120(int256 value) internal pure returns (int120 downcasted) {
        downcasted = int120(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 120 bits");
    }

    /**
     * @dev Returns the downcasted int112 from int256, reverting on
     * overflow (when the input is less than smallest int112 or
     * greater than largest int112).
     *
     * Counterpart to Solidity's `int112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     *
     * _Available since v4.7._
     */
    function toInt112(int256 value) internal pure returns (int112 downcasted) {
        downcasted = int112(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 112 bits");
    }

    /**
     * @dev Returns the downcasted int104 from int256, reverting on
     * overflow (when the input is less than smallest int104 or
     * greater than largest int104).
     *
     * Counterpart to Solidity's `int104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     *
     * _Available since v4.7._
     */
    function toInt104(int256 value) internal pure returns (int104 downcasted) {
        downcasted = int104(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 104 bits");
    }

    /**
     * @dev Returns the downcasted int96 from int256, reverting on
     * overflow (when the input is less than smallest int96 or
     * greater than largest int96).
     *
     * Counterpart to Solidity's `int96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     *
     * _Available since v4.7._
     */
    function toInt96(int256 value) internal pure returns (int96 downcasted) {
        downcasted = int96(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 96 bits");
    }

    /**
     * @dev Returns the downcasted int88 from int256, reverting on
     * overflow (when the input is less than smallest int88 or
     * greater than largest int88).
     *
     * Counterpart to Solidity's `int88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     *
     * _Available since v4.7._
     */
    function toInt88(int256 value) internal pure returns (int88 downcasted) {
        downcasted = int88(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 88 bits");
    }

    /**
     * @dev Returns the downcasted int80 from int256, reverting on
     * overflow (when the input is less than smallest int80 or
     * greater than largest int80).
     *
     * Counterpart to Solidity's `int80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     *
     * _Available since v4.7._
     */
    function toInt80(int256 value) internal pure returns (int80 downcasted) {
        downcasted = int80(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 80 bits");
    }

    /**
     * @dev Returns the downcasted int72 from int256, reverting on
     * overflow (when the input is less than smallest int72 or
     * greater than largest int72).
     *
     * Counterpart to Solidity's `int72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     *
     * _Available since v4.7._
     */
    function toInt72(int256 value) internal pure returns (int72 downcasted) {
        downcasted = int72(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 72 bits");
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v3.1._
     */
    function toInt64(int256 value) internal pure returns (int64 downcasted) {
        downcasted = int64(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 64 bits");
    }

    /**
     * @dev Returns the downcasted int56 from int256, reverting on
     * overflow (when the input is less than smallest int56 or
     * greater than largest int56).
     *
     * Counterpart to Solidity's `int56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     *
     * _Available since v4.7._
     */
    function toInt56(int256 value) internal pure returns (int56 downcasted) {
        downcasted = int56(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 56 bits");
    }

    /**
     * @dev Returns the downcasted int48 from int256, reverting on
     * overflow (when the input is less than smallest int48 or
     * greater than largest int48).
     *
     * Counterpart to Solidity's `int48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     *
     * _Available since v4.7._
     */
    function toInt48(int256 value) internal pure returns (int48 downcasted) {
        downcasted = int48(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 48 bits");
    }

    /**
     * @dev Returns the downcasted int40 from int256, reverting on
     * overflow (when the input is less than smallest int40 or
     * greater than largest int40).
     *
     * Counterpart to Solidity's `int40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     *
     * _Available since v4.7._
     */
    function toInt40(int256 value) internal pure returns (int40 downcasted) {
        downcasted = int40(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 40 bits");
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v3.1._
     */
    function toInt32(int256 value) internal pure returns (int32 downcasted) {
        downcasted = int32(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 32 bits");
    }

    /**
     * @dev Returns the downcasted int24 from int256, reverting on
     * overflow (when the input is less than smallest int24 or
     * greater than largest int24).
     *
     * Counterpart to Solidity's `int24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     *
     * _Available since v4.7._
     */
    function toInt24(int256 value) internal pure returns (int24 downcasted) {
        downcasted = int24(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 24 bits");
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v3.1._
     */
    function toInt16(int256 value) internal pure returns (int16 downcasted) {
        downcasted = int16(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 16 bits");
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     *
     * _Available since v3.1._
     */
    function toInt8(int256 value) internal pure returns (int8 downcasted) {
        downcasted = int8(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 8 bits");
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     *
     * _Available since v3.0._
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
        return int256(value);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

import "./math/Math.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.8.17;

interface ISmardexFactory {
    /**
     * @notice emitted at each SmardexPair created
     * @param token0 address of the token0
     * @param token1 address of the token1
     * @param pair address of the SmardexPair created
     * @param totalPair number of SmardexPair created so far
     */
    event PairCreated(address indexed token0, address indexed token1, address pair, uint256 totalPair);

    /**
     * @notice return which address fees will be transferred
     */
    function feeTo() external view returns (address);

    /**
     * @notice return which address can update feeTo
     */
    function feeToSetter() external view returns (address);

    /**
     * @notice return the address of the pair of 2 tokens
     */
    function getPair(address _tokenA, address _tokenB) external view returns (address pair_);

    /**
     * @notice return the address of the pair at index
     * @param _index index of the pair
     * @return pair_ address of the pair
     */
    function allPairs(uint256 _index) external view returns (address pair_);

    /**
     * @notice return the quantity of pairs
     * @return quantity in uint256
     */
    function allPairsLength() external view returns (uint256);

    /**
     * @notice create pair with 2 address
     * @param _tokenA address of tokenA
     * @param _tokenB address of tokenB
     * @return pair_ address of the pair created
     */
    function createPair(address _tokenA, address _tokenB) external returns (address pair_);

    /**
     * @notice set the address who will receive fees, can only be call by feeToSetter
     * @param _feeTo address to replace
     */
    function setFeeTo(address _feeTo) external;

    /**
     * @notice set the address who can update feeTo, can only be call by feeToSetter
     * @param _feeToSetter address to replace
     */
    function setFeeToSetter(address _feeToSetter) external;
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.8.17;

interface ISmardexMintCallback {
    /**
     * @notice callback data for mint
     * @param token0 address of the first token of the pair
     * @param token1 address of the second token of the pair
     * @param amount0 amount of token0 to provide
     * @param amount1 amount of token1 to provide
     * @param payer address of the payer to provide token for the mint
     */
    struct MintCallbackData {
        address token0;
        address token1;
        uint256 amount0;
        uint256 amount1;
        address payer;
    }

    /**
     * @notice callback to implement when calling SmardexPair.mint
     * @param _data callback data for mint
     */
    function smardexMintCallback(MintCallbackData calldata _data) external;
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.17;

// interfaces
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/extensions/draft-IERC20Permit.sol";

interface ISmardexPair is IERC20, IERC20Permit {
    /**
     * @notice emitted at each mint
     * @param sender address calling the mint function (usualy the Router contract)
     * @param to address that receives the LP-tokens
     * @param amount0 amount of token0 to be added in liquidity
     * @param amount1 amount of token1 to be added in liquidity
     * @dev the amount of LP-token sent can be caught using the transfer event of the pair
     */
    event Mint(address indexed sender, address indexed to, uint256 amount0, uint256 amount1);

    /**
     * @notice emitted at each burn
     * @param sender address calling the burn function (usualy the Router contract)
     * @param to address that receives the tokens
     * @param amount0 amount of token0 to be withdrawn
     * @param amount1 amount of token1 to be withdrawn
     * @dev the amount of LP-token sent can be caught using the transfer event of the pair
     */
    event Burn(address indexed sender, address indexed to, uint256 amount0, uint256 amount1);

    /**
     * @notice emitted at each swap
     * @param sender address calling the swap function (usualy the Router contract)
     * @param to address that receives the out-tokens
     * @param amount0 amount of token0 to be swapped
     * @param amount1 amount of token1 to be swapped
     * @dev one of the 2 amount is always negative, the other one is always positive. The positive one is the one that
     * the user send to the contract, the negative one is the one that the contract send to the user.
     */
    event Swap(address indexed sender, address indexed to, int256 amount0, int256 amount1);

    /**
     * @notice emitted each time the fictive reserves are changed (mint, burn, swap)
     * @param reserve0 the new reserve of token0
     * @param reserve1 the new reserve of token1
     * @param fictiveReserve0 the new fictive reserve of token0
     * @param fictiveReserve1 the new fictive reserve of token1
     * @param priceAverage0 the new priceAverage of token0
     * @param priceAverage1 the new priceAverage of token1
     */
    event Sync(
        uint256 reserve0,
        uint256 reserve1,
        uint256 fictiveReserve0,
        uint256 fictiveReserve1,
        uint256 priceAverage0,
        uint256 priceAverage1
    );

    /**
     * @notice get the factory address
     * @return address of the factory
     */
    function factory() external view returns (address);

    /**
     * @notice get the token0 address
     * @return address of the token0
     */
    function token0() external view returns (address);

    /**
     * @notice get the token1 address
     * @return address of the token1
     */
    function token1() external view returns (address);

    /**
     * @notice called once by the factory at time of deployment
     * @param _token0 address of token0
     * @param _token1 address of token1
     */
    function initialize(address _token0, address _token1) external;

    /**
     * @notice return current Reserves of both token in the pair,
     *  corresponding to token balance - pending fees
     * @return reserve0_ current reserve of token0 - pending fee0
     * @return reserve1_ current reserve of token1 - pending fee1
     */
    function getReserves() external view returns (uint256 reserve0_, uint256 reserve1_);

    /**
     * @notice return current Fictives Reserves of both token in the pair
     * @return fictiveReserve0_ current fictive reserve of token0
     * @return fictiveReserve1_ current fictive reserve of token1
     */
    function getFictiveReserves() external view returns (uint256 fictiveReserve0_, uint256 fictiveReserve1_);

    /**
     * @notice return current pending fees of both token in the pair
     * @return fees0_ current pending fees of token0
     * @return fees1_ current pending fees of token1
     */
    function getFees() external view returns (uint256 fees0_, uint256 fees1_);

    /**
     * @notice return last updated price average at timestamp of both token in the pair,
     *  read price0Average/price1Average for current price of token0/token1
     * @return priceAverage0_ current price for token0
     * @return priceAverage1_ current price for token1
     * @return blockTimestampLast_ last block timestamp when price was updated
     */
    function getPriceAverage()
        external
        view
        returns (uint256 priceAverage0_, uint256 priceAverage1_, uint256 blockTimestampLast_);

    /**
     * @notice return current price average of both token in the pair for provided currentTimeStamp
     *  read price0Average/price1Average for current price of token0/token1
     * @param _fictiveReserveIn,
     * @param _fictiveReserveOut,
     * @param _priceAverageLastTimestamp,
     * @param _priceAverageIn current price for token0
     * @param _priceAverageOut current price for token1
     * @param _currentTimestamp block timestamp to get price
     * @return priceAverageIn_ current price for token0
     * @return priceAverageOut_ current price for token1
     */
    function getUpdatedPriceAverage(
        uint256 _fictiveReserveIn,
        uint256 _fictiveReserveOut,
        uint256 _priceAverageLastTimestamp,
        uint256 _priceAverageIn,
        uint256 _priceAverageOut,
        uint256 _currentTimestamp
    ) external pure returns (uint256 priceAverageIn_, uint256 priceAverageOut_);

    /**
     * @notice Mint lp tokens proportionally of added tokens in balance. Should be called from a contract
     * that makes safety checks like the SmardexRouter
     * @param _to address who will receive minted tokens
     * @param _amount0 amount of token0 to provide
     * @param _amount1 amount of token1 to provide
     * @return liquidity_ amount of lp tokens minted and sent to the address defined in parameter
     */
    function mint(
        address _to,
        uint256 _amount0,
        uint256 _amount1,
        address _payer
    ) external returns (uint256 liquidity_);

    /**
     * @notice Burn lp tokens in the balance of the contract. Sends to the defined address the amount of token0 and
     * token1 proportionally of the amount burned. Should be called from a contract that makes safety checks like the
     * SmardexRouter
     * @param _to address who will receive tokens
     * @return amount0_ amount of token0 sent to the address defined in parameter
     * @return amount1_ amount of token0 sent to the address defined in parameter
     */
    function burn(address _to) external returns (uint256 amount0_, uint256 amount1_);

    /**
     * @notice Swaps tokens. Sends to the defined address the amount of token0 and token1 defined in parameters.
     * Tokens to trade should be already sent in the contract.
     * Swap function will check if the resulted balance is correct with current reserves and reserves fictive.
     * Should be called from a contract that makes safety checks like the SmardexRouter
     * @param _to address who will receive tokens
     * @param _zeroForOne token0 to token1
     * @param _amountSpecified amount of token wanted
     * @param _data used for flash swap, data.length must be 0 for regular swap
     */
    function swap(
        address _to,
        bool _zeroForOne,
        int256 _amountSpecified,
        bytes calldata _data
    ) external returns (int256 amount0_, int256 amount1_);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.8.17;

interface ISmardexSwapCallback {
    /**
     * @notice callback data for swap
     * @param _amount0Delta amount of token0 for the swap (negative is incoming, positive is required to pay to pair)
     * @param _amount1Delta amount of token1 for the swap (negative is incoming, positive is required to pay to pair)
     * @param _data for Router path and payer for the swap (see router for details)
     */
    function smardexSwapCallback(int256 _amount0Delta, int256 _amount1Delta, bytes calldata _data) external;
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity =0.8.17;

// libraries
import "@openzeppelin/contracts/utils/math/Math.sol";

// interfaces
import "../interfaces/ISmardexPair.sol";

library SmardexLibrary {
    /// @notice amount of fees sent to LP, not in percent but in FEES_BASE
    uint256 public constant FEES_LP = 5;

    /// @notice amount of fees sent to the pool, not in percent but in FEES_BASE. if feeTo is null, sent to the LP
    uint256 public constant FEES_POOL = 2;

    /// @notice total amount of fees, not in percent but in FEES_BASE
    uint256 public constant FEES_TOTAL = FEES_LP + FEES_POOL;

    /// @notice base of the FEES
    uint256 public constant FEES_BASE = 10000;

    /// @notice ratio of quantity that is send to the user, after removing the fees, not in percent but in FEES_BASE
    uint256 public constant REVERSE_FEES_TOTAL = FEES_BASE - FEES_TOTAL;

    /// @notice precision for approxEq, not in percent but in APPROX_PRECISION_BASE
    uint256 public constant APPROX_PRECISION = 1;

    /// @notice base of the APPROX_PRECISION
    uint256 public constant APPROX_PRECISION_BASE = 1_000_000;

    /// @notice number of seconds to reset priceAverage
    uint256 private constant MAX_BLOCK_DIFF_SECONDS = 300;

    /**
     * @notice check if 2 numbers are approximatively equal, using APPROX_PRECISION
     * @param _x number to compare
     * @param _y number to compare
     * @return true if numbers are approximatively equal, false otherwise
     */
    function approxEq(uint256 _x, uint256 _y) internal pure returns (bool) {
        if (_x > _y) {
            return _x < (_y + (_y * APPROX_PRECISION) / APPROX_PRECISION_BASE);
        } else {
            return _y < (_x + (_x * APPROX_PRECISION) / APPROX_PRECISION_BASE);
        }
    }

    /**
     * @notice check if 2 ratio are approximatively equal: _xNum _/ xDen ~= _yNum / _yDen
     * @param _xNum numerator of the first ratio to compare
     * @param _xDen denominator of the first ratio to compare
     * @param _yNum numerator of the second ratio to compare
     * @param _yDen denominator of the second ratio to compare
     * @return true if ratio are approximatively equal, false otherwise
     */
    function ratioApproxEq(uint256 _xNum, uint256 _xDen, uint256 _yNum, uint256 _yDen) internal pure returns (bool) {
        return approxEq(_xNum * _yDen, _xDen * _yNum);
    }

    /**
     * @notice update priceAverage given old timestamp, new timestamp and prices
     * @param _fictiveReserveIn ratio component of the new price of the in-token
     * @param _fictiveReserveOut ratio component of the new price of the out-token
     * @param _priceAverageLastTimestamp timestamp of the last priceAvregae update (0, if never updated)
     * @param _priceAverageIn ratio component of the last priceAverage of the in-token
     * @param _priceAverageOut ratio component of the last priceAverage of the out-token
     * @param _currentTimestamp timestamp of the priceAverage to update
     * @return newPriceAverageIn_ ratio component of the updated priceAverage of the in-token
     * @return newPriceAverageOut_ ratio component of the updated priceAverage of the out-token
     */
    function getUpdatedPriceAverage(
        uint256 _fictiveReserveIn,
        uint256 _fictiveReserveOut,
        uint256 _priceAverageLastTimestamp,
        uint256 _priceAverageIn,
        uint256 _priceAverageOut,
        uint256 _currentTimestamp
    ) internal pure returns (uint256 newPriceAverageIn_, uint256 newPriceAverageOut_) {
        require(_currentTimestamp >= _priceAverageLastTimestamp, "SmardexPair: INVALID_TIMESTAMP");

        // very first time
        if (_priceAverageLastTimestamp == 0) {
            newPriceAverageIn_ = _fictiveReserveIn;
            newPriceAverageOut_ = _fictiveReserveOut;
        }
        // another tx has been done in the same block
        else if (_priceAverageLastTimestamp == _currentTimestamp) {
            newPriceAverageIn_ = _priceAverageIn;
            newPriceAverageOut_ = _priceAverageOut;
        }
        // need to compute new linear-average price
        else {
            // compute new price:
            uint256 _timeDiff = Math.min(_currentTimestamp - _priceAverageLastTimestamp, MAX_BLOCK_DIFF_SECONDS);

            newPriceAverageIn_ = _fictiveReserveIn;
            newPriceAverageOut_ =
                (((MAX_BLOCK_DIFF_SECONDS - _timeDiff) * _priceAverageOut * newPriceAverageIn_) /
                    _priceAverageIn +
                    _timeDiff *
                    _fictiveReserveOut) /
                MAX_BLOCK_DIFF_SECONDS;
        }
    }

    /**
     * @notice compute the firstTradeAmountIn so that the price reach the price Average
     * @param _amountIn the amountIn requested, it's the maximum possible value for firstAmountIn_
     * @param _fictiveReserveIn fictive reserve of the in-token
     * @param _fictiveReserveOut fictive reserve of the out-token
     * @param _priceAverageIn ratio component of the priceAverage of the in-token
     * @param _priceAverageOut ratio component of the priceAverage of the out-token
     * @return firstAmountIn_ the first amount of in-token
     *
     * @dev if the trade is going in the direction that the price will never reach the priceAverage, or if _amountIn
     * is not big enough to reach the priceAverage or if the price is already equal to the priceAverage, then
     * firstAmountIn_ will be set to _amountIn
     */
    function computeFirstTradeQtyIn(
        uint256 _amountIn,
        uint256 _fictiveReserveIn,
        uint256 _fictiveReserveOut,
        uint256 _priceAverageIn,
        uint256 _priceAverageOut
    ) internal pure returns (uint256 firstAmountIn_) {
        // default value
        firstAmountIn_ = _amountIn;

        // if trade is in the good direction
        if (_fictiveReserveOut * _priceAverageIn > _fictiveReserveIn * _priceAverageOut) {
            // pre-compute all operands
            uint256 _toSub = _fictiveReserveIn * (FEES_BASE + REVERSE_FEES_TOTAL - FEES_POOL);
            uint256 _toDiv = (REVERSE_FEES_TOTAL + FEES_LP) << 1;
            uint256 _inSqrt = (((_fictiveReserveIn * _fictiveReserveOut) << 2) / _priceAverageOut) *
                _priceAverageIn *
                (REVERSE_FEES_TOTAL * (FEES_BASE - FEES_POOL)) +
                (_fictiveReserveIn * _fictiveReserveIn * (FEES_LP * FEES_LP));

            // reverse sqrt check to only compute sqrt if really needed
            if (_inSqrt < (_toSub + _amountIn * _toDiv) ** 2) {
                firstAmountIn_ = (Math.sqrt(_inSqrt) - _toSub) / _toDiv;
            }
        }
    }

    /**
     * @notice compute the firstTradeAmountOut so that the price reach the price Average
     * @param _amountOut the amountOut requested, it's the maximum possible value for firstAmountOut_
     * @param _fictiveReserveIn fictive reserve of the in-token
     * @param _fictiveReserveOut fictive reserve of the out-token
     * @param _priceAverageIn ratio component of the priceAverage of the in-token
     * @param _priceAverageOut ratio component of the priceAverage of the out-token
     * @return firstAmountOut_ the first amount of out-token
     *
     * @dev if the trade is going in the direction that the price will never reach the priceAverage, or if _amountOut
     * is not big enough to reach the priceAverage or if the price is already equal to the priceAverage, then
     * firstAmountOut_ will be set to _amountOut
     */
    function computeFirstTradeQtyOut(
        uint256 _amountOut,
        uint256 _fictiveReserveIn,
        uint256 _fictiveReserveOut,
        uint256 _priceAverageIn,
        uint256 _priceAverageOut
    ) internal pure returns (uint256 firstAmountOut_) {
        // default value
        firstAmountOut_ = _amountOut;

        // if trade is in the good direction
        if (_fictiveReserveOut * _priceAverageIn > _fictiveReserveIn * _priceAverageOut) {
            // pre-compute all operands
            uint256 _fictiveReserveOutPredFees = (_fictiveReserveIn * FEES_LP * _priceAverageOut) / _priceAverageIn;
            uint256 _toAdd = ((_fictiveReserveOut * REVERSE_FEES_TOTAL) << 1) + _fictiveReserveOutPredFees;
            uint256 _toDiv = REVERSE_FEES_TOTAL << 1;
            uint256 _inSqrt = (((_fictiveReserveOut * _fictiveReserveOutPredFees) << 2) *
                (REVERSE_FEES_TOTAL * (FEES_BASE - FEES_POOL))) /
                FEES_LP +
                _fictiveReserveOutPredFees *
                _fictiveReserveOutPredFees;

            // reverse sqrt check to only compute sqrt if really needed
            if (_inSqrt > (_toAdd - _amountOut * _toDiv) ** 2) {
                firstAmountOut_ = (_toAdd - Math.sqrt(_inSqrt)) / _toDiv;
            }
        }
    }

    /**
     * @notice compute fictive reserves
     * @param _reserveIn reserve of the in-token
     * @param _reserveOut reserve of the out-token
     * @param _fictiveReserveIn fictive reserve of the in-token
     * @param _fictiveReserveOut fictive reserve of the out-token
     * @return newFictiveReserveIn_ new fictive reserve of the in-token
     * @return newFictiveReserveOut_ new fictive reserve of the out-token
     */
    function computeFictiveReserves(
        uint256 _reserveIn,
        uint256 _reserveOut,
        uint256 _fictiveReserveIn,
        uint256 _fictiveReserveOut
    ) internal pure returns (uint256 newFictiveReserveIn_, uint256 newFictiveReserveOut_) {
        if (_reserveOut * _fictiveReserveIn < _reserveIn * _fictiveReserveOut) {
            uint256 _temp = (((_reserveOut * _reserveOut) / _fictiveReserveOut) * _fictiveReserveIn) / _reserveIn;
            newFictiveReserveIn_ =
                (_temp * _fictiveReserveIn) /
                _fictiveReserveOut +
                (_reserveOut * _fictiveReserveIn) /
                _fictiveReserveOut;
            newFictiveReserveOut_ = _reserveOut + _temp;
        } else {
            newFictiveReserveIn_ = (_fictiveReserveIn * _reserveOut) / _fictiveReserveOut + _reserveIn;
            newFictiveReserveOut_ = (_reserveIn * _fictiveReserveOut) / _fictiveReserveIn + _reserveOut;
        }

        // div all values by 4
        newFictiveReserveIn_ >>= 2;
        newFictiveReserveOut_ >>= 2;
    }

    /**
     * @notice apply k const rule using fictive reserve, when the amountIn is specified
     * @param _amountIn qty of token that arrives in the contract
     * @param _reserveIn reserve of the in-token
     * @param _reserveOut reserve of the out-token
     * @param _fictiveReserveIn fictive reserve of the in-token
     * @param _fictiveReserveOut fictive reserve of the out-token
     * @return amountOut_ qty of token that leaves in the contract
     * @return newReserveIn_ new reserve of the in-token after the transaction
     * @return newReserveOut_ new reserve of the out-token after the transaction
     * @return newFictiveReserveIn_ new fictive reserve of the in-token after the transaction
     * @return newFictiveReserveOut_ new fictive reserve of the out-token after the transaction
     */
    function applyKConstRuleOut(
        uint256 _amountIn,
        uint256 _reserveIn,
        uint256 _reserveOut,
        uint256 _fictiveReserveIn,
        uint256 _fictiveReserveOut
    )
        internal
        pure
        returns (
            uint256 amountOut_,
            uint256 newReserveIn_,
            uint256 newReserveOut_,
            uint256 newFictiveReserveIn_,
            uint256 newFictiveReserveOut_
        )
    {
        // k const rule
        uint256 _amountInWithFee = _amountIn * REVERSE_FEES_TOTAL;
        uint256 _numerator = _amountInWithFee * _fictiveReserveOut;
        uint256 _denominator = _fictiveReserveIn * FEES_BASE + _amountInWithFee;
        amountOut_ = _numerator / _denominator;

        // update new reserves and add lp-fees to pools
        uint256 _amountInWithFeeLp = (_amountInWithFee + (_amountIn * FEES_LP)) / FEES_BASE;
        newReserveIn_ = _reserveIn + _amountInWithFeeLp;
        newFictiveReserveIn_ = _fictiveReserveIn + _amountInWithFeeLp;
        newReserveOut_ = _reserveOut - amountOut_;
        newFictiveReserveOut_ = _fictiveReserveOut - amountOut_;
    }

    /**
     * @notice apply k const rule using fictive reserve, when the amountOut is specified
     * @param _amountOut qty of token that leaves in the contract
     * @param _reserveIn reserve of the in-token
     * @param _reserveOut reserve of the out-token
     * @param _fictiveReserveIn fictive reserve of the in-token
     * @param _fictiveReserveOut fictive reserve of the out-token
     * @return amountIn_ qty of token that arrives in the contract
     * @return newReserveIn_ new reserve of the in-token after the transaction
     * @return newReserveOut_ new reserve of the out-token after the transaction
     * @return newFictiveReserveIn_ new fictive reserve of the in-token after the transaction
     * @return newFictiveReserveOut_ new fictive reserve of the out-token after the transaction
     */
    function applyKConstRuleIn(
        uint256 _amountOut,
        uint256 _reserveIn,
        uint256 _reserveOut,
        uint256 _fictiveReserveIn,
        uint256 _fictiveReserveOut
    )
        internal
        pure
        returns (
            uint256 amountIn_,
            uint256 newReserveIn_,
            uint256 newReserveOut_,
            uint256 newFictiveReserveIn_,
            uint256 newFictiveReserveOut_
        )
    {
        // k const rule
        uint256 _numerator = _fictiveReserveIn * _amountOut * FEES_BASE;
        uint256 _denominator = (_fictiveReserveOut - _amountOut) * REVERSE_FEES_TOTAL;
        amountIn_ = _numerator / _denominator + 1;

        // update new reserves
        uint256 _amountInWithFeeLp = (amountIn_ * (REVERSE_FEES_TOTAL + FEES_LP)) / FEES_BASE;
        newReserveIn_ = _reserveIn + _amountInWithFeeLp;
        newFictiveReserveIn_ = _fictiveReserveIn + _amountInWithFeeLp;
        newReserveOut_ = _reserveOut - _amountOut;
        newFictiveReserveOut_ = _fictiveReserveOut - _amountOut;
    }

    /**
     * @notice return the amount of tokens the user would get by doing a swap
     * @param _amountIn quantity of token the user want to swap (to sell)
     * @param _reserveIn reserves of the selling token (getReserve())
     * @param _reserveOut reserves of the buying token (getReserve())
     * @param _fictiveReserveIn fictive reserve of the selling token (getFictiveReserves())
     * @param _fictiveReserveOut fictive reserve of the buying token (getFictiveReserves())
     * @param _priceAverageIn price average of the selling token
     * @param _priceAverageOut price average of the buying token
     * @return amountOut_ The amount of token the user would receive
     * @return newReserveIn_ reserves of the selling token after the swap
     * @return newReserveOut_ reserves of the buying token after the swap
     * @return newFictiveReserveIn_ fictive reserve of the selling token after the swap
     * @return newFictiveReserveOut_ fictive reserve of the buying token after the swap
     */
    function getAmountOut(
        uint256 _amountIn,
        uint256 _reserveIn,
        uint256 _reserveOut,
        uint256 _fictiveReserveIn,
        uint256 _fictiveReserveOut,
        uint256 _priceAverageIn,
        uint256 _priceAverageOut
    )
        internal
        pure
        returns (
            uint256 amountOut_,
            uint256 newReserveIn_,
            uint256 newReserveOut_,
            uint256 newFictiveReserveIn_,
            uint256 newFictiveReserveOut_
        )
    {
        require(_amountIn > 0, "SmarDexLibrary: INSUFFICIENT_INPUT_AMOUNT");
        require(
            _reserveIn > 0 && _reserveOut > 0 && _fictiveReserveIn > 0 && _fictiveReserveOut > 0,
            "SmarDexLibrary: INSUFFICIENT_LIQUIDITY"
        );

        uint256 _amountInWithFees = (_amountIn * REVERSE_FEES_TOTAL) / FEES_BASE;
        uint256 _firstAmountIn = computeFirstTradeQtyIn(
            _amountInWithFees,
            _fictiveReserveIn,
            _fictiveReserveOut,
            _priceAverageIn,
            _priceAverageOut
        );

        // if there is 2 trade: 1st trade mustn't re-compute fictive reserves, 2nd should
        if (
            _firstAmountIn == _amountInWithFees &&
            ratioApproxEq(_fictiveReserveIn, _fictiveReserveOut, _priceAverageIn, _priceAverageOut)
        ) {
            (_fictiveReserveIn, _fictiveReserveOut) = computeFictiveReserves(
                _reserveIn,
                _reserveOut,
                _fictiveReserveIn,
                _fictiveReserveOut
            );
        }

        // avoid stack too deep
        {
            uint256 _firstAmountInNoFees = (_firstAmountIn * FEES_BASE) / REVERSE_FEES_TOTAL;
            (
                amountOut_,
                newReserveIn_,
                newReserveOut_,
                newFictiveReserveIn_,
                newFictiveReserveOut_
            ) = applyKConstRuleOut(
                _firstAmountInNoFees,
                _reserveIn,
                _reserveOut,
                _fictiveReserveIn,
                _fictiveReserveOut
            );

            // update amountIn in case there is a second trade
            _amountIn -= _firstAmountInNoFees;
        }

        // if we need a second trade
        if (_firstAmountIn < _amountInWithFees) {
            // in the second trade ALWAYS recompute fictive reserves
            (newFictiveReserveIn_, newFictiveReserveOut_) = computeFictiveReserves(
                newReserveIn_,
                newReserveOut_,
                newFictiveReserveIn_,
                newFictiveReserveOut_
            );

            uint256 _secondAmountOutNoFees;
            (
                _secondAmountOutNoFees,
                newReserveIn_,
                newReserveOut_,
                newFictiveReserveIn_,
                newFictiveReserveOut_
            ) = applyKConstRuleOut(
                _amountIn,
                newReserveIn_,
                newReserveOut_,
                newFictiveReserveIn_,
                newFictiveReserveOut_
            );
            amountOut_ += _secondAmountOutNoFees;
        }
    }

    /**
     * @notice return the amount of tokens the user should spend by doing a swap
     * @param _amountOut quantity of token the user want to swap (to buy)
     * @param _reserveIn reserves of the selling token (getReserve())
     * @param _reserveOut reserves of the buying token (getReserve())
     * @param _fictiveReserveIn fictive reserve of the selling token (getFictiveReserves())
     * @param _fictiveReserveOut fictive reserve of the buying token (getFictiveReserves())
     * @param _priceAverageIn price average of the selling token
     * @param _priceAverageOut price average of the buying token
     * @return amountIn_ The amount of token the user would spend to receive _amountOut
     * @return newReserveIn_ reserves of the selling token after the swap
     * @return newReserveOut_ reserves of the buying token after the swap
     * @return newFictiveReserveIn_ fictive reserve of the selling token after the swap
     * @return newFictiveReserveOut_ fictive reserve of the buying token after the swap
     */
    function getAmountIn(
        uint256 _amountOut,
        uint256 _reserveIn,
        uint256 _reserveOut,
        uint256 _fictiveReserveIn,
        uint256 _fictiveReserveOut,
        uint256 _priceAverageIn,
        uint256 _priceAverageOut
    )
        internal
        pure
        returns (
            uint256 amountIn_,
            uint256 newReserveIn_,
            uint256 newReserveOut_,
            uint256 newFictiveReserveIn_,
            uint256 newFictiveReserveOut_
        )
    {
        require(_amountOut > 0, "SmarDexLibrary: INSUFFICIENT_OUTPUT_AMOUNT");
        require(
            _amountOut < _fictiveReserveOut &&
                _reserveIn > 0 &&
                _reserveOut > 0 &&
                _fictiveReserveIn > 0 &&
                _fictiveReserveOut > 0,
            "SmarDexLibrary: INSUFFICIENT_LIQUIDITY"
        );

        uint256 _firstAmountOut = computeFirstTradeQtyOut(
            _amountOut,
            _fictiveReserveIn,
            _fictiveReserveOut,
            _priceAverageIn,
            _priceAverageOut
        );

        // if there is 2 trade: 1st trade mustn't re-compute fictive reserves, 2nd should
        if (
            _firstAmountOut == _amountOut &&
            ratioApproxEq(_fictiveReserveIn, _fictiveReserveOut, _priceAverageIn, _priceAverageOut)
        ) {
            (_fictiveReserveIn, _fictiveReserveOut) = computeFictiveReserves(
                _reserveIn,
                _reserveOut,
                _fictiveReserveIn,
                _fictiveReserveOut
            );
        }

        (amountIn_, newReserveIn_, newReserveOut_, newFictiveReserveIn_, newFictiveReserveOut_) = applyKConstRuleIn(
            _firstAmountOut,
            _reserveIn,
            _reserveOut,
            _fictiveReserveIn,
            _fictiveReserveOut
        );

        // if we need a second trade
        if (_firstAmountOut < _amountOut) {
            // in the second trade ALWAYS recompute fictive reserves
            (newFictiveReserveIn_, newFictiveReserveOut_) = computeFictiveReserves(
                newReserveIn_,
                newReserveOut_,
                newFictiveReserveIn_,
                newFictiveReserveOut_
            );

            uint256 _secondAmountIn;
            (
                _secondAmountIn,
                newReserveIn_,
                newReserveOut_,
                newFictiveReserveIn_,
                newFictiveReserveOut_
            ) = applyKConstRuleIn(
                _amountOut - _firstAmountOut,
                newReserveIn_,
                newReserveOut_,
                newFictiveReserveIn_,
                newFictiveReserveOut_
            );
            amountIn_ += _secondAmountIn;
        }
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity =0.8.17;

/**
 * @title TransferHelper
 * @notice helper methods for interacting with ERC20 tokens and sending ETH that do not consistently return true/false
 * @custom:from Uniswap lib, adapted to version 0.8.17
 * @custom:url https://github.com/Uniswap/solidity-lib/blob/master/contracts/libraries/TransferHelper.sol
 */
library TransferHelper {
    function safeApprove(address token, address to, uint256 value) internal {
        // bytes4(keccak256(bytes('approve(address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0x095ea7b3, to, value));
        require(
            success && (data.length == 0 || abi.decode(data, (bool))),
            "TransferHelper::safeApprove: approve failed"
        );
    }

    function safeTransfer(address token, address to, uint256 value) internal {
        // bytes4(keccak256(bytes('transfer(address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0xa9059cbb, to, value));
        require(
            success && (data.length == 0 || abi.decode(data, (bool))),
            "TransferHelper::safeTransfer: transfer failed"
        );
    }

    function safeTransferFrom(address token, address from, address to, uint256 value) internal {
        // bytes4(keccak256(bytes('transferFrom(address,address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0x23b872dd, from, to, value));
        require(
            success && (data.length == 0 || abi.decode(data, (bool))),
            "TransferHelper::transferFrom: transferFrom failed"
        );
    }

    function safeTransferETH(address to, uint256 value) internal {
        (bool success, ) = to.call{ value: value }(new bytes(0));
        require(success, "TransferHelper::safeTransferETH: ETH transfer failed");
    }
}

{
  "metadata": {
    "bytecodeHash": "none",
    "useLiteralContent": true
  },
  "optimizer": {
    "enabled": true,
    "runs": 999999
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"sender","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount0","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount1","type":"uint256"}],"name":"Burn","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"sender","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount0","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount1","type":"uint256"}],"name":"Mint","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"sender","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"int256","name":"amount0","type":"int256"},{"indexed":false,"internalType":"int256","name":"amount1","type":"int256"}],"name":"Swap","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"reserve0","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"reserve1","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"fictiveReserve0","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"fictiveReserve1","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"priceAverage0","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"priceAverage1","type":"uint256"}],"name":"Sync","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"DOMAIN_SEPARATOR","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_to","type":"address"}],"name":"burn","outputs":[{"internalType":"uint256","name":"amount0_","type":"uint256"},{"internalType":"uint256","name":"amount1_","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"factory","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getFees","outputs":[{"internalType":"uint256","name":"fees0_","type":"uint256"},{"internalType":"uint256","name":"fees1_","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getFictiveReserves","outputs":[{"internalType":"uint256","name":"fictiveReserve0_","type":"uint256"},{"internalType":"uint256","name":"fictiveReserve1_","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getPriceAverage","outputs":[{"internalType":"uint256","name":"priceAverage0_","type":"uint256"},{"internalType":"uint256","name":"priceAverage1_","type":"uint256"},{"internalType":"uint256","name":"priceAverageLastTimestamp_","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getReserves","outputs":[{"internalType":"uint256","name":"reserve0_","type":"uint256"},{"internalType":"uint256","name":"reserve1_","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_fictiveReserveIn","type":"uint256"},{"internalType":"uint256","name":"_fictiveReserveOut","type":"uint256"},{"internalType":"uint256","name":"_priceAverageLastTimestamp","type":"uint256"},{"internalType":"uint256","name":"_priceAverageIn","type":"uint256"},{"internalType":"uint256","name":"_priceAverageOut","type":"uint256"},{"internalType":"uint256","name":"_currentTimestamp","type":"uint256"}],"name":"getUpdatedPriceAverage","outputs":[{"internalType":"uint256","name":"priceAverageIn_","type":"uint256"},{"internalType":"uint256","name":"priceAverageOut_","type":"uint256"}],"stateMutability":"pure","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_token0","type":"address"},{"internalType":"address","name":"_token1","type":"address"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_amount0","type":"uint256"},{"internalType":"uint256","name":"_amount1","type":"uint256"},{"internalType":"address","name":"_payer","type":"address"}],"name":"mint","outputs":[{"internalType":"uint256","name":"liquidity_","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"nonces","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"},{"internalType":"uint8","name":"v","type":"uint8"},{"internalType":"bytes32","name":"r","type":"bytes32"},{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"permit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_to","type":"address"},{"internalType":"bool","name":"_zeroForOne","type":"bool"},{"internalType":"int256","name":"_amountSpecified","type":"int256"},{"internalType":"bytes","name":"_data","type":"bytes"}],"name":"swap","outputs":[{"internalType":"int256","name":"amount0_","type":"int256"},{"internalType":"int256","name":"amount1_","type":"int256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"token0","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"token1","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"}]

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