Contract

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;

import "@openzeppelin/contracts/access/Ownable.sol";
import "erc721a/contracts/ERC721A.sol";

/////////////////////////////////////////////////////////////////////////////
//                                                                         //
//                                                                         //
//    ██╗░░░██╗░█████╗░██╗░░░░░██╗░░██╗░█████╗░██╗░░░░░██╗░░░░░░█████╗░    //
//    ██║░░░██║██╔══██╗██║░░░░░██║░░██║██╔══██╗██║░░░░░██║░░░░░██╔══██╗    //
//    ╚██╗░██╔╝███████║██║░░░░░███████║███████║██║░░░░░██║░░░░░███████║    //
//    ░╚████╔╝░██╔══██║██║░░░░░██╔══██║██╔══██║██║░░░░░██║░░░░░██╔══██║    //
//    ░░╚██╔╝░░██║░░██║███████╗██║░░██║██║░░██║███████╗███████╗██║░░██║    //
//    ░░░╚═╝░░░╚═╝░░╚═╝╚══════╝╚═╝░░╚═╝╚═╝░░╚═╝╚══════╝╚══════╝╚═╝░░╚═╝    //
//                                                                         //
//                                                                         //
/////////////////////////////////////////////////////////////////////////////

/**
 * Subset of a Utility token contract with only the methods that the dna contract will call.
 */
interface Utility {
    function approvedBurn(
        address spender,
        uint256 tokenId,
        uint256 amount
    ) external;
}

contract DNAV2 is Ownable {
    // =============================================================
    //                           CONSTANTS
    // =============================================================

    // Checks the `ownerOf` method of this address for tokenId reroll eligibility
    address public immutable TOKEN_CONTRACT;

    // Hash for the initial revealed tokens
    string public constant MINT_PROVENANCE_HASH =
        "037226b21636376001dbfd22f52d1dd72845efa9613baf51a6a011ac731b2327";

    // Hash for the tokens post armory v1 event
    string public constant ARMORY_V1_PROVENANCE_HASH =
        "60a731c1259c12c40f6eafee058235cb54eaed74593c7401b3568af30b74c65b";

    // Proof of hash will be given after all tokens are auctioned
    string public constant AUCTION_PROVENANCE_HASH =
        "eb8c88969a4b776d757de962a194f5b4ffaaadb991ecfbb24d806c7bc6397d30";

    // The Initial DNA is composed of 128 bits for each token
    // with each trait taking up 8 bits
    uint256 private constant _BITMASK_INITIAL_DNA = (1 << 8) - 1;

    // Offset in bits where the booster information will start
    uint256 private constant _BOOSTER_OFFSET = 128;

    // 11 rerollable traits will fit in 4 bits
    uint256 private constant _BITLEN_BOOSTER_TRAIT = 4;
    uint256 private constant _BITMASK_BOOSTER_TRAIT =
        (1 << _BITLEN_BOOSTER_TRAIT) - 1;

    uint256 private constant _BITLEN_SINGLE_BOOST = 10;
    uint256 private constant _BITMASK_SINGLE_BOOST =
        (1 << _BITLEN_SINGLE_BOOST) - 1;
    uint256 private constant _BITLEN_TRAIT_BOOST = 11;
    uint256 private constant _BITMASK_TRAIT_BOOST =
        (1 << _BITLEN_TRAIT_BOOST) - 1;

    // =============================================================
    //                            STORAGE
    // =============================================================

    // This IPFS code hash will have a function that can translate any token's
    // DNA into the corresponding traits. This logic is put here instead of on the
    // contract so that the gas fee for rerolling is minimal for the user.
    string public dnaTranslatorCodeHash;

    // Each call to reroll will give this many options to select during boost
    uint256 public numBoosts;

    // Defines what token is required to reroll traits
    address public utilityAddress;
    uint256 public utilityTokenId;

    // Only address allowed to change a token's dna.
    address public dnaInjectorAddress;

    // A token's dna cannot be changed unless both of these are active.
    bool public rerollActive;
    bool public boostingActive;

    // Mapping from traitId to whether it is rerollable
    mapping(uint256 => bool) public traitIdRerollable;

    // For pseudo-rng
    uint256 private _seed;

    // Mapping tokenId to DNA information. An extra bit is needed for
    // each trait because the random boosterValue does have a small
    // but non-zero probability to roll a 0. (1 in 1024)
    //
    // Bits Layout:
    // - [0..127]   `initialDna`
    // - [128]      `hasHairBooster`
    // - [129..138] `hairBooster`
    // - [139]      `hasClothesBooster`
    // - [140..149] `clothesBooster`
    // - [150]      `hasPrimaryBooster`
    // - [151..160] `primaryBooster`
    // - [161]      `hasHeadgearBooster`
    // - [162..171] `headgearBooster`
    // - [172]      `hasFaceBooster`
    // - [173..182] `faceBooster`
    // - [183]      `hasFaceAccBooster`
    // - [184..193] `faceAccBooster`
    // - [194]      `hasEyeBooster`
    // - [195..204] `eyeBooster`
    // - [205]      `hasMouthBooster`
    // - [206..215] `mouthBooster`
    // - [216]      `hasEarBooster`
    // - [217..226] `earBooster`
    // - [227]      `hasNeckBooster`
    // - [228..237] `neckBooster`
    // - [238]      `hasTattooBooster`
    // - [239..248] `tattooBooster`
    // - [249..255]  Extra Unused Bits
    mapping(uint256 => uint256) private _dna;

    // Bits Layout:
    // - [0..3]     `boosterIdx`
    // - [4..13]    `boosterRoll`
    // - [14..23]   `boosterRoll`
    // - [24..33]   `boosterRoll`
    // - [34..256]   Extra unused bits or more boosterRolls
    mapping(uint256 => uint256) public activeBooster;

    // =============================================================
    //                         Events
    // =============================================================

    event Bought(
        uint256 indexed tokenId,
        uint256 indexed traitId,
        uint256 tokenDna,
        uint256 boosterVal
    );
    event Boost(uint256 indexed tokenId, uint256 boosterId, uint256 tokenDna);

    // =============================================================
    //                         Constructor
    // =============================================================
    constructor(address tokenAddress) {
        TOKEN_CONTRACT = tokenAddress;
    }

    // =============================================================
    //                          Only Owner
    // =============================================================

    /**
     * @notice Allows the owner to update the IPFS code hash with a
     * function providing the translation between DNA and token traits.
     */
    function setDnaTranslatorCodeHash(
        string memory codeHash
    ) external onlyOwner {
        dnaTranslatorCodeHash = codeHash;
    }

    /**
     * @notice Allows the owner to change the number of selectable options per boost.
     */
    function setNumBoosts(uint256 updatedNumBoosts) external onlyOwner {
        numBoosts = updatedNumBoosts;
    }

    /**
     * @notice Allows the owner to change the dna of any tokenId and is used for initial dna injection.
     */
    function injectDna(
        uint256[] memory dna,
        uint256[] memory tokenIds
    ) external {
        if (msg.sender != dnaInjectorAddress) revert NotDnaInjector();

        for (uint i = 0; i < tokenIds.length; ) {
            _dna[tokenIds[i]] = dna[i];

            unchecked {
                ++i;
            }
        }
    }

    /**
     * @notice Allows the owner to update the dna translator script.
     */
    function setDnaInjector(address dnaInjector) external onlyOwner {
        dnaInjectorAddress = dnaInjector;
    }

    /**
     * @notice Allows the owner to select an address and token that must be burned to alter a token's
     * dna. This address must have an {approvedBurn} method that is callable by this contract for
     * another user's tokens.
     */
    function setRerollToken(address token, uint256 tokenId) external onlyOwner {
        utilityAddress = token;
        utilityTokenId = tokenId;
    }

    /**
     * @notice Allows the owner to enable or disable token owners from rolling their dna.
     */
    function setRerollActive(bool active) external onlyOwner {
        rerollActive = active;
    }

    /**
     * @notice Allows the owner to enable or disable token owners from finalizing rolls into their dna.
     */
    function setBoostingActive(bool active) external onlyOwner {
        boostingActive = active;
    }

    /**
     * @notice Allows the owner to set which traitIds are rerollable.
     */
    function setTraitIdRerollable(
        uint256 traitId,
        bool rerollable
    ) external onlyOwner {
        traitIdRerollable[traitId] = rerollable;
    }

    // =============================================================
    //                    Dna Interactions
    // =============================================================

    /**
     * @dev Returns the saved token dna for a given id. This dna can be translated into
     * metadata using the scripts that are part of the DNA_TRANSLATOR_CODE_HASH constant.
     */
    function getTokenDna(uint256 tokenId) external view returns (uint256) {
        return _dna[tokenId];
    }

    /**
     * @dev Adds an activeBooster to a given tokenId for a certain trait. The caller cannot be
     * a contract address and they must own both the Valhalla tokenId as well as the corresponding
     * Utility token to be burned.
     *
     * Note:
     * - A token CANNOT reroll a trait they do not have
     * - A token CAN override an existing activeBooster with another roll without calling {boost}
     * - The override is true even if a different rerollTraitId is selected from the first roll
     *
     * @param tokenId tokenId that the booster is attached to
     * @param rerollTraitId follows the mapping:
     * 0: Hair
     * 1: Clothes
     * 2: Primary
     * 3: Headgear
     * 4: Face
     * 5: FaceAcc
     * 6: Eye
     * 7: Mouth
     * 8: Ear
     * 9: Neck
     * 10: Tattoo
     */
    function reroll(uint256 tokenId, uint256 rerollTraitId) external {
        if (!rerollActive) revert RerollInactive();
        if (msg.sender != tx.origin) revert NotEOA();
        if (!traitIdRerollable[rerollTraitId]) revert TraitNotRerollable();
        if (IERC721A(TOKEN_CONTRACT).ownerOf(tokenId) != msg.sender)
            revert NotTokenOwner();

        Utility(utilityAddress).approvedBurn(msg.sender, utilityTokenId, 1);

        // Cheaper gaswise to do left bitshift by 3 than to multiply rerollTraitId by 8
        if (
            _dna[tokenId] &
                (_BITMASK_INITIAL_DNA <<
                    (_correctedRerollTraitId(rerollTraitId) << 3)) ==
            0
        ) revert TraitNotOnToken();

        // Shift _randomNumber up to make room for reroll traitId
        uint256 boosterVal = _randomNumber() << _BITLEN_BOOSTER_TRAIT;
        boosterVal = boosterVal | rerollTraitId;

        activeBooster[tokenId] = boosterVal;
        emit Bought(tokenId, rerollTraitId, _dna[tokenId], boosterVal);
    }

    /**
     * @dev Selects one of the boosters rolled from the {reroll} method and replaces the appropriate
     * section in the token dna's bits with one of the new values that was randomly rolled.
     */
    function boost(uint256 tokenId, uint256 boosterIdx) external {
        if (!boostingActive) revert BoostingInactive();
        if (IERC721A(TOKEN_CONTRACT).ownerOf(tokenId) != msg.sender)
            revert NotTokenOwner();
        uint256 boosterVal = activeBooster[tokenId];
        if (boosterVal == 0) revert NoBoosterAtIdx();
        activeBooster[tokenId] = 0;

        if (boosterIdx >= numBoosts) revert InvalidBoostIdx();
        uint256 selectedVal = (boosterVal >>
            (boosterIdx * _BITLEN_SINGLE_BOOST + _BITLEN_BOOSTER_TRAIT)) &
            _BITMASK_SINGLE_BOOST;

        // This shifts the value up one bit and adds a flag to show that this trait has been boosted.
        // This is needed on the small chance that random value generated is exactly 0.
        selectedVal = (selectedVal << 1) | 1;

        uint256 rerollTraitId = boosterVal & _BITMASK_BOOSTER_TRAIT;
        uint256 traitShiftAmount = _correctedRerollTraitId(rerollTraitId) *
            _BITLEN_TRAIT_BOOST +
            _BOOSTER_OFFSET;

        _dna[tokenId] =
            (_dna[tokenId] & ~(_BITMASK_TRAIT_BOOST << traitShiftAmount)) |
            (selectedVal << traitShiftAmount);
        emit Boost(tokenId, boosterIdx, _dna[tokenId]);
    }

    /**
     * @dev Returns the corrected index of where rerollTraitId is located in the initial dna.
     * This is needed because Identity, Background, and Aura traits are not rerollable and thus the
     * rerollTraitId might not always match its location in the dna.
     */
    function _correctedRerollTraitId(
        uint256 _rerollTraitId
    ) internal pure returns (uint256) {
        if (_rerollTraitId < 3) return _rerollTraitId;
        return _rerollTraitId + 2;
    }

    /**
     * @dev Makes a pseudo-random number. Although there is some room for the block.timestamp to be
     * manipulated by miners, the random number used here is not used to determine something with high
     * impact such as determining a lottery winner.
     *
     * Implementing a more secure random number generator would lead to a worse reroll experience.
     */
    function _randomNumber() internal returns (uint256) {
        return
            uint256(
                keccak256(
                    abi.encodePacked(block.timestamp, block.prevrandao, ++_seed)
                )
            );
    }

    error BoostingInactive();
    error InvalidBoostIdx();
    error NoBoosterAtIdx();
    error NotDnaInjector();
    error NotEOA();
    error NotTokenOwner();
    error RerollInactive();
    error TraitNotRerollable();
    error TraitNotOnToken();
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// ERC721A Contracts v4.2.3
// Creator: Chiru Labs

pragma solidity ^0.8.4;

import './IERC721A.sol';

/**
 * @dev Interface of ERC721 token receiver.
 */
interface ERC721A__IERC721Receiver {
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

/**
 * @title ERC721A
 *
 * @dev Implementation of the [ERC721](https://eips.ethereum.org/EIPS/eip-721)
 * Non-Fungible Token Standard, including the Metadata extension.
 * Optimized for lower gas during batch mints.
 *
 * Token IDs are minted in sequential order (e.g. 0, 1, 2, 3, ...)
 * starting from `_startTokenId()`.
 *
 * Assumptions:
 *
 * - An owner cannot have more than 2**64 - 1 (max value of uint64) of supply.
 * - The maximum token ID cannot exceed 2**256 - 1 (max value of uint256).
 */
contract ERC721A is IERC721A {
    // Bypass for a `--via-ir` bug (https://github.com/chiru-labs/ERC721A/pull/364).
    struct TokenApprovalRef {
        address value;
    }

    // =============================================================
    //                           CONSTANTS
    // =============================================================

    // Mask of an entry in packed address data.
    uint256 private constant _BITMASK_ADDRESS_DATA_ENTRY = (1 << 64) - 1;

    // The bit position of `numberMinted` in packed address data.
    uint256 private constant _BITPOS_NUMBER_MINTED = 64;

    // The bit position of `numberBurned` in packed address data.
    uint256 private constant _BITPOS_NUMBER_BURNED = 128;

    // The bit position of `aux` in packed address data.
    uint256 private constant _BITPOS_AUX = 192;

    // Mask of all 256 bits in packed address data except the 64 bits for `aux`.
    uint256 private constant _BITMASK_AUX_COMPLEMENT = (1 << 192) - 1;

    // The bit position of `startTimestamp` in packed ownership.
    uint256 private constant _BITPOS_START_TIMESTAMP = 160;

    // The bit mask of the `burned` bit in packed ownership.
    uint256 private constant _BITMASK_BURNED = 1 << 224;

    // The bit position of the `nextInitialized` bit in packed ownership.
    uint256 private constant _BITPOS_NEXT_INITIALIZED = 225;

    // The bit mask of the `nextInitialized` bit in packed ownership.
    uint256 private constant _BITMASK_NEXT_INITIALIZED = 1 << 225;

    // The bit position of `extraData` in packed ownership.
    uint256 private constant _BITPOS_EXTRA_DATA = 232;

    // Mask of all 256 bits in a packed ownership except the 24 bits for `extraData`.
    uint256 private constant _BITMASK_EXTRA_DATA_COMPLEMENT = (1 << 232) - 1;

    // The mask of the lower 160 bits for addresses.
    uint256 private constant _BITMASK_ADDRESS = (1 << 160) - 1;

    // The maximum `quantity` that can be minted with {_mintERC2309}.
    // This limit is to prevent overflows on the address data entries.
    // For a limit of 5000, a total of 3.689e15 calls to {_mintERC2309}
    // is required to cause an overflow, which is unrealistic.
    uint256 private constant _MAX_MINT_ERC2309_QUANTITY_LIMIT = 5000;

    // The `Transfer` event signature is given by:
    // `keccak256(bytes("Transfer(address,address,uint256)"))`.
    bytes32 private constant _TRANSFER_EVENT_SIGNATURE =
        0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef;

    // =============================================================
    //                            STORAGE
    // =============================================================

    // The next token ID to be minted.
    uint256 private _currentIndex;

    // The number of tokens burned.
    uint256 private _burnCounter;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Mapping from token ID to ownership details
    // An empty struct value does not necessarily mean the token is unowned.
    // See {_packedOwnershipOf} implementation for details.
    //
    // Bits Layout:
    // - [0..159]   `addr`
    // - [160..223] `startTimestamp`
    // - [224]      `burned`
    // - [225]      `nextInitialized`
    // - [232..255] `extraData`
    mapping(uint256 => uint256) private _packedOwnerships;

    // Mapping owner address to address data.
    //
    // Bits Layout:
    // - [0..63]    `balance`
    // - [64..127]  `numberMinted`
    // - [128..191] `numberBurned`
    // - [192..255] `aux`
    mapping(address => uint256) private _packedAddressData;

    // Mapping from token ID to approved address.
    mapping(uint256 => TokenApprovalRef) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    // =============================================================
    //                          CONSTRUCTOR
    // =============================================================

    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
        _currentIndex = _startTokenId();
    }

    // =============================================================
    //                   TOKEN COUNTING OPERATIONS
    // =============================================================

    /**
     * @dev Returns the starting token ID.
     * To change the starting token ID, please override this function.
     */
    function _startTokenId() internal view virtual returns (uint256) {
        return 0;
    }

    /**
     * @dev Returns the next token ID to be minted.
     */
    function _nextTokenId() internal view virtual returns (uint256) {
        return _currentIndex;
    }

    /**
     * @dev Returns the total number of tokens in existence.
     * Burned tokens will reduce the count.
     * To get the total number of tokens minted, please see {_totalMinted}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        // Counter underflow is impossible as _burnCounter cannot be incremented
        // more than `_currentIndex - _startTokenId()` times.
        unchecked {
            return _currentIndex - _burnCounter - _startTokenId();
        }
    }

    /**
     * @dev Returns the total amount of tokens minted in the contract.
     */
    function _totalMinted() internal view virtual returns (uint256) {
        // Counter underflow is impossible as `_currentIndex` does not decrement,
        // and it is initialized to `_startTokenId()`.
        unchecked {
            return _currentIndex - _startTokenId();
        }
    }

    /**
     * @dev Returns the total number of tokens burned.
     */
    function _totalBurned() internal view virtual returns (uint256) {
        return _burnCounter;
    }

    // =============================================================
    //                    ADDRESS DATA OPERATIONS
    // =============================================================

    /**
     * @dev Returns the number of tokens in `owner`'s account.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        if (owner == address(0)) revert BalanceQueryForZeroAddress();
        return _packedAddressData[owner] & _BITMASK_ADDRESS_DATA_ENTRY;
    }

    /**
     * Returns the number of tokens minted by `owner`.
     */
    function _numberMinted(address owner) internal view returns (uint256) {
        return (_packedAddressData[owner] >> _BITPOS_NUMBER_MINTED) & _BITMASK_ADDRESS_DATA_ENTRY;
    }

    /**
     * Returns the number of tokens burned by or on behalf of `owner`.
     */
    function _numberBurned(address owner) internal view returns (uint256) {
        return (_packedAddressData[owner] >> _BITPOS_NUMBER_BURNED) & _BITMASK_ADDRESS_DATA_ENTRY;
    }

    /**
     * Returns the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
     */
    function _getAux(address owner) internal view returns (uint64) {
        return uint64(_packedAddressData[owner] >> _BITPOS_AUX);
    }

    /**
     * Sets the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
     * If there are multiple variables, please pack them into a uint64.
     */
    function _setAux(address owner, uint64 aux) internal virtual {
        uint256 packed = _packedAddressData[owner];
        uint256 auxCasted;
        // Cast `aux` with assembly to avoid redundant masking.
        assembly {
            auxCasted := aux
        }
        packed = (packed & _BITMASK_AUX_COMPLEMENT) | (auxCasted << _BITPOS_AUX);
        _packedAddressData[owner] = packed;
    }

    // =============================================================
    //                            IERC165
    // =============================================================

    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30000 gas.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        // The interface IDs are constants representing the first 4 bytes
        // of the XOR of all function selectors in the interface.
        // See: [ERC165](https://eips.ethereum.org/EIPS/eip-165)
        // (e.g. `bytes4(i.functionA.selector ^ i.functionB.selector ^ ...)`)
        return
            interfaceId == 0x01ffc9a7 || // ERC165 interface ID for ERC165.
            interfaceId == 0x80ac58cd || // ERC165 interface ID for ERC721.
            interfaceId == 0x5b5e139f; // ERC165 interface ID for ERC721Metadata.
    }

    // =============================================================
    //                        IERC721Metadata
    // =============================================================

    /**
     * @dev Returns the token collection name.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        if (!_exists(tokenId)) revert URIQueryForNonexistentToken();

        string memory baseURI = _baseURI();
        return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, _toString(tokenId))) : '';
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, it can be overridden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return '';
    }

    // =============================================================
    //                     OWNERSHIPS OPERATIONS
    // =============================================================

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) public view virtual override returns (address) {
        return address(uint160(_packedOwnershipOf(tokenId)));
    }

    /**
     * @dev Gas spent here starts off proportional to the maximum mint batch size.
     * It gradually moves to O(1) as tokens get transferred around over time.
     */
    function _ownershipOf(uint256 tokenId) internal view virtual returns (TokenOwnership memory) {
        return _unpackedOwnership(_packedOwnershipOf(tokenId));
    }

    /**
     * @dev Returns the unpacked `TokenOwnership` struct at `index`.
     */
    function _ownershipAt(uint256 index) internal view virtual returns (TokenOwnership memory) {
        return _unpackedOwnership(_packedOwnerships[index]);
    }

    /**
     * @dev Initializes the ownership slot minted at `index` for efficiency purposes.
     */
    function _initializeOwnershipAt(uint256 index) internal virtual {
        if (_packedOwnerships[index] == 0) {
            _packedOwnerships[index] = _packedOwnershipOf(index);
        }
    }

    /**
     * Returns the packed ownership data of `tokenId`.
     */
    function _packedOwnershipOf(uint256 tokenId) private view returns (uint256) {
        uint256 curr = tokenId;

        unchecked {
            if (_startTokenId() <= curr)
                if (curr < _currentIndex) {
                    uint256 packed = _packedOwnerships[curr];
                    // If not burned.
                    if (packed & _BITMASK_BURNED == 0) {
                        // Invariant:
                        // There will always be an initialized ownership slot
                        // (i.e. `ownership.addr != address(0) && ownership.burned == false`)
                        // before an unintialized ownership slot
                        // (i.e. `ownership.addr == address(0) && ownership.burned == false`)
                        // Hence, `curr` will not underflow.
                        //
                        // We can directly compare the packed value.
                        // If the address is zero, packed will be zero.
                        while (packed == 0) {
                            packed = _packedOwnerships[--curr];
                        }
                        return packed;
                    }
                }
        }
        revert OwnerQueryForNonexistentToken();
    }

    /**
     * @dev Returns the unpacked `TokenOwnership` struct from `packed`.
     */
    function _unpackedOwnership(uint256 packed) private pure returns (TokenOwnership memory ownership) {
        ownership.addr = address(uint160(packed));
        ownership.startTimestamp = uint64(packed >> _BITPOS_START_TIMESTAMP);
        ownership.burned = packed & _BITMASK_BURNED != 0;
        ownership.extraData = uint24(packed >> _BITPOS_EXTRA_DATA);
    }

    /**
     * @dev Packs ownership data into a single uint256.
     */
    function _packOwnershipData(address owner, uint256 flags) private view returns (uint256 result) {
        assembly {
            // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
            owner := and(owner, _BITMASK_ADDRESS)
            // `owner | (block.timestamp << _BITPOS_START_TIMESTAMP) | flags`.
            result := or(owner, or(shl(_BITPOS_START_TIMESTAMP, timestamp()), flags))
        }
    }

    /**
     * @dev Returns the `nextInitialized` flag set if `quantity` equals 1.
     */
    function _nextInitializedFlag(uint256 quantity) private pure returns (uint256 result) {
        // For branchless setting of the `nextInitialized` flag.
        assembly {
            // `(quantity == 1) << _BITPOS_NEXT_INITIALIZED`.
            result := shl(_BITPOS_NEXT_INITIALIZED, eq(quantity, 1))
        }
    }

    // =============================================================
    //                      APPROVAL OPERATIONS
    // =============================================================

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the
     * zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) public payable virtual override {
        address owner = ownerOf(tokenId);

        if (_msgSenderERC721A() != owner)
            if (!isApprovedForAll(owner, _msgSenderERC721A())) {
                revert ApprovalCallerNotOwnerNorApproved();
            }

        _tokenApprovals[tokenId].value = to;
        emit Approval(owner, to, tokenId);
    }

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) public view virtual override returns (address) {
        if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();

        return _tokenApprovals[tokenId].value;
    }

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom}
     * for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _operatorApprovals[_msgSenderERC721A()][operator] = approved;
        emit ApprovalForAll(_msgSenderERC721A(), operator, approved);
    }

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted. See {_mint}.
     */
    function _exists(uint256 tokenId) internal view virtual returns (bool) {
        return
            _startTokenId() <= tokenId &&
            tokenId < _currentIndex && // If within bounds,
            _packedOwnerships[tokenId] & _BITMASK_BURNED == 0; // and not burned.
    }

    /**
     * @dev Returns whether `msgSender` is equal to `approvedAddress` or `owner`.
     */
    function _isSenderApprovedOrOwner(
        address approvedAddress,
        address owner,
        address msgSender
    ) private pure returns (bool result) {
        assembly {
            // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
            owner := and(owner, _BITMASK_ADDRESS)
            // Mask `msgSender` to the lower 160 bits, in case the upper bits somehow aren't clean.
            msgSender := and(msgSender, _BITMASK_ADDRESS)
            // `msgSender == owner || msgSender == approvedAddress`.
            result := or(eq(msgSender, owner), eq(msgSender, approvedAddress))
        }
    }

    /**
     * @dev Returns the storage slot and value for the approved address of `tokenId`.
     */
    function _getApprovedSlotAndAddress(uint256 tokenId)
        private
        view
        returns (uint256 approvedAddressSlot, address approvedAddress)
    {
        TokenApprovalRef storage tokenApproval = _tokenApprovals[tokenId];
        // The following is equivalent to `approvedAddress = _tokenApprovals[tokenId].value`.
        assembly {
            approvedAddressSlot := tokenApproval.slot
            approvedAddress := sload(approvedAddressSlot)
        }
    }

    // =============================================================
    //                      TRANSFER OPERATIONS
    // =============================================================

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token
     * by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public payable virtual override {
        uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);

        if (address(uint160(prevOwnershipPacked)) != from) revert TransferFromIncorrectOwner();

        (uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);

        // The nested ifs save around 20+ gas over a compound boolean condition.
        if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))
            if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();

        if (to == address(0)) revert TransferToZeroAddress();

        _beforeTokenTransfers(from, to, tokenId, 1);

        // Clear approvals from the previous owner.
        assembly {
            if approvedAddress {
                // This is equivalent to `delete _tokenApprovals[tokenId]`.
                sstore(approvedAddressSlot, 0)
            }
        }

        // Underflow of the sender's balance is impossible because we check for
        // ownership above and the recipient's balance can't realistically overflow.
        // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
        unchecked {
            // We can directly increment and decrement the balances.
            --_packedAddressData[from]; // Updates: `balance -= 1`.
            ++_packedAddressData[to]; // Updates: `balance += 1`.

            // Updates:
            // - `address` to the next owner.
            // - `startTimestamp` to the timestamp of transfering.
            // - `burned` to `false`.
            // - `nextInitialized` to `true`.
            _packedOwnerships[tokenId] = _packOwnershipData(
                to,
                _BITMASK_NEXT_INITIALIZED | _nextExtraData(from, to, prevOwnershipPacked)
            );

            // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
            if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {
                uint256 nextTokenId = tokenId + 1;
                // If the next slot's address is zero and not burned (i.e. packed value is zero).
                if (_packedOwnerships[nextTokenId] == 0) {
                    // If the next slot is within bounds.
                    if (nextTokenId != _currentIndex) {
                        // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
                        _packedOwnerships[nextTokenId] = prevOwnershipPacked;
                    }
                }
            }
        }

        emit Transfer(from, to, tokenId);
        _afterTokenTransfers(from, to, tokenId, 1);
    }

    /**
     * @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public payable virtual override {
        safeTransferFrom(from, to, tokenId, '');
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token
     * by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement
     * {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) public payable virtual override {
        transferFrom(from, to, tokenId);
        if (to.code.length != 0)
            if (!_checkContractOnERC721Received(from, to, tokenId, _data)) {
                revert TransferToNonERC721ReceiverImplementer();
            }
    }

    /**
     * @dev Hook that is called before a set of serially-ordered token IDs
     * are about to be transferred. This includes minting.
     * And also called before burning one token.
     *
     * `startTokenId` - the first token ID to be transferred.
     * `quantity` - the amount to be transferred.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, `tokenId` will be burned by `from`.
     * - `from` and `to` are never both zero.
     */
    function _beforeTokenTransfers(
        address from,
        address to,
        uint256 startTokenId,
        uint256 quantity
    ) internal virtual {}

    /**
     * @dev Hook that is called after a set of serially-ordered token IDs
     * have been transferred. This includes minting.
     * And also called after one token has been burned.
     *
     * `startTokenId` - the first token ID to be transferred.
     * `quantity` - the amount to be transferred.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
     * transferred to `to`.
     * - When `from` is zero, `tokenId` has been minted for `to`.
     * - When `to` is zero, `tokenId` has been burned by `from`.
     * - `from` and `to` are never both zero.
     */
    function _afterTokenTransfers(
        address from,
        address to,
        uint256 startTokenId,
        uint256 quantity
    ) internal virtual {}

    /**
     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target contract.
     *
     * `from` - Previous owner of the given token ID.
     * `to` - Target address that will receive the token.
     * `tokenId` - Token ID to be transferred.
     * `_data` - Optional data to send along with the call.
     *
     * Returns whether the call correctly returned the expected magic value.
     */
    function _checkContractOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) private returns (bool) {
        try ERC721A__IERC721Receiver(to).onERC721Received(_msgSenderERC721A(), from, tokenId, _data) returns (
            bytes4 retval
        ) {
            return retval == ERC721A__IERC721Receiver(to).onERC721Received.selector;
        } catch (bytes memory reason) {
            if (reason.length == 0) {
                revert TransferToNonERC721ReceiverImplementer();
            } else {
                assembly {
                    revert(add(32, reason), mload(reason))
                }
            }
        }
    }

    // =============================================================
    //                        MINT OPERATIONS
    // =============================================================

    /**
     * @dev Mints `quantity` tokens and transfers them to `to`.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `quantity` must be greater than 0.
     *
     * Emits a {Transfer} event for each mint.
     */
    function _mint(address to, uint256 quantity) internal virtual {
        uint256 startTokenId = _currentIndex;
        if (quantity == 0) revert MintZeroQuantity();

        _beforeTokenTransfers(address(0), to, startTokenId, quantity);

        // Overflows are incredibly unrealistic.
        // `balance` and `numberMinted` have a maximum limit of 2**64.
        // `tokenId` has a maximum limit of 2**256.
        unchecked {
            // Updates:
            // - `balance += quantity`.
            // - `numberMinted += quantity`.
            //
            // We can directly add to the `balance` and `numberMinted`.
            _packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);

            // Updates:
            // - `address` to the owner.
            // - `startTimestamp` to the timestamp of minting.
            // - `burned` to `false`.
            // - `nextInitialized` to `quantity == 1`.
            _packedOwnerships[startTokenId] = _packOwnershipData(
                to,
                _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
            );

            uint256 toMasked;
            uint256 end = startTokenId + quantity;

            // Use assembly to loop and emit the `Transfer` event for gas savings.
            // The duplicated `log4` removes an extra check and reduces stack juggling.
            // The assembly, together with the surrounding Solidity code, have been
            // delicately arranged to nudge the compiler into producing optimized opcodes.
            assembly {
                // Mask `to` to the lower 160 bits, in case the upper bits somehow aren't clean.
                toMasked := and(to, _BITMASK_ADDRESS)
                // Emit the `Transfer` event.
                log4(
                    0, // Start of data (0, since no data).
                    0, // End of data (0, since no data).
                    _TRANSFER_EVENT_SIGNATURE, // Signature.
                    0, // `address(0)`.
                    toMasked, // `to`.
                    startTokenId // `tokenId`.
                )

                // The `iszero(eq(,))` check ensures that large values of `quantity`
                // that overflows uint256 will make the loop run out of gas.
                // The compiler will optimize the `iszero` away for performance.
                for {
                    let tokenId := add(startTokenId, 1)
                } iszero(eq(tokenId, end)) {
                    tokenId := add(tokenId, 1)
                } {
                    // Emit the `Transfer` event. Similar to above.
                    log4(0, 0, _TRANSFER_EVENT_SIGNATURE, 0, toMasked, tokenId)
                }
            }
            if (toMasked == 0) revert MintToZeroAddress();

            _currentIndex = end;
        }
        _afterTokenTransfers(address(0), to, startTokenId, quantity);
    }

    /**
     * @dev Mints `quantity` tokens and transfers them to `to`.
     *
     * This function is intended for efficient minting only during contract creation.
     *
     * It emits only one {ConsecutiveTransfer} as defined in
     * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309),
     * instead of a sequence of {Transfer} event(s).
     *
     * Calling this function outside of contract creation WILL make your contract
     * non-compliant with the ERC721 standard.
     * For full ERC721 compliance, substituting ERC721 {Transfer} event(s) with the ERC2309
     * {ConsecutiveTransfer} event is only permissible during contract creation.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `quantity` must be greater than 0.
     *
     * Emits a {ConsecutiveTransfer} event.
     */
    function _mintERC2309(address to, uint256 quantity) internal virtual {
        uint256 startTokenId = _currentIndex;
        if (to == address(0)) revert MintToZeroAddress();
        if (quantity == 0) revert MintZeroQuantity();
        if (quantity > _MAX_MINT_ERC2309_QUANTITY_LIMIT) revert MintERC2309QuantityExceedsLimit();

        _beforeTokenTransfers(address(0), to, startTokenId, quantity);

        // Overflows are unrealistic due to the above check for `quantity` to be below the limit.
        unchecked {
            // Updates:
            // - `balance += quantity`.
            // - `numberMinted += quantity`.
            //
            // We can directly add to the `balance` and `numberMinted`.
            _packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);

            // Updates:
            // - `address` to the owner.
            // - `startTimestamp` to the timestamp of minting.
            // - `burned` to `false`.
            // - `nextInitialized` to `quantity == 1`.
            _packedOwnerships[startTokenId] = _packOwnershipData(
                to,
                _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
            );

            emit ConsecutiveTransfer(startTokenId, startTokenId + quantity - 1, address(0), to);

            _currentIndex = startTokenId + quantity;
        }
        _afterTokenTransfers(address(0), to, startTokenId, quantity);
    }

    /**
     * @dev Safely mints `quantity` tokens and transfers them to `to`.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement
     * {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
     * - `quantity` must be greater than 0.
     *
     * See {_mint}.
     *
     * Emits a {Transfer} event for each mint.
     */
    function _safeMint(
        address to,
        uint256 quantity,
        bytes memory _data
    ) internal virtual {
        _mint(to, quantity);

        unchecked {
            if (to.code.length != 0) {
                uint256 end = _currentIndex;
                uint256 index = end - quantity;
                do {
                    if (!_checkContractOnERC721Received(address(0), to, index++, _data)) {
                        revert TransferToNonERC721ReceiverImplementer();
                    }
                } while (index < end);
                // Reentrancy protection.
                if (_currentIndex != end) revert();
            }
        }
    }

    /**
     * @dev Equivalent to `_safeMint(to, quantity, '')`.
     */
    function _safeMint(address to, uint256 quantity) internal virtual {
        _safeMint(to, quantity, '');
    }

    // =============================================================
    //                        BURN OPERATIONS
    // =============================================================

    /**
     * @dev Equivalent to `_burn(tokenId, false)`.
     */
    function _burn(uint256 tokenId) internal virtual {
        _burn(tokenId, false);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId, bool approvalCheck) internal virtual {
        uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);

        address from = address(uint160(prevOwnershipPacked));

        (uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);

        if (approvalCheck) {
            // The nested ifs save around 20+ gas over a compound boolean condition.
            if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))
                if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();
        }

        _beforeTokenTransfers(from, address(0), tokenId, 1);

        // Clear approvals from the previous owner.
        assembly {
            if approvedAddress {
                // This is equivalent to `delete _tokenApprovals[tokenId]`.
                sstore(approvedAddressSlot, 0)
            }
        }

        // Underflow of the sender's balance is impossible because we check for
        // ownership above and the recipient's balance can't realistically overflow.
        // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
        unchecked {
            // Updates:
            // - `balance -= 1`.
            // - `numberBurned += 1`.
            //
            // We can directly decrement the balance, and increment the number burned.
            // This is equivalent to `packed -= 1; packed += 1 << _BITPOS_NUMBER_BURNED;`.
            _packedAddressData[from] += (1 << _BITPOS_NUMBER_BURNED) - 1;

            // Updates:
            // - `address` to the last owner.
            // - `startTimestamp` to the timestamp of burning.
            // - `burned` to `true`.
            // - `nextInitialized` to `true`.
            _packedOwnerships[tokenId] = _packOwnershipData(
                from,
                (_BITMASK_BURNED | _BITMASK_NEXT_INITIALIZED) | _nextExtraData(from, address(0), prevOwnershipPacked)
            );

            // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
            if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {
                uint256 nextTokenId = tokenId + 1;
                // If the next slot's address is zero and not burned (i.e. packed value is zero).
                if (_packedOwnerships[nextTokenId] == 0) {
                    // If the next slot is within bounds.
                    if (nextTokenId != _currentIndex) {
                        // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
                        _packedOwnerships[nextTokenId] = prevOwnershipPacked;
                    }
                }
            }
        }

        emit Transfer(from, address(0), tokenId);
        _afterTokenTransfers(from, address(0), tokenId, 1);

        // Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.
        unchecked {
            _burnCounter++;
        }
    }

    // =============================================================
    //                     EXTRA DATA OPERATIONS
    // =============================================================

    /**
     * @dev Directly sets the extra data for the ownership data `index`.
     */
    function _setExtraDataAt(uint256 index, uint24 extraData) internal virtual {
        uint256 packed = _packedOwnerships[index];
        if (packed == 0) revert OwnershipNotInitializedForExtraData();
        uint256 extraDataCasted;
        // Cast `extraData` with assembly to avoid redundant masking.
        assembly {
            extraDataCasted := extraData
        }
        packed = (packed & _BITMASK_EXTRA_DATA_COMPLEMENT) | (extraDataCasted << _BITPOS_EXTRA_DATA);
        _packedOwnerships[index] = packed;
    }

    /**
     * @dev Called during each token transfer to set the 24bit `extraData` field.
     * Intended to be overridden by the cosumer contract.
     *
     * `previousExtraData` - the value of `extraData` before transfer.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, `tokenId` will be burned by `from`.
     * - `from` and `to` are never both zero.
     */
    function _extraData(
        address from,
        address to,
        uint24 previousExtraData
    ) internal view virtual returns (uint24) {}

    /**
     * @dev Returns the next extra data for the packed ownership data.
     * The returned result is shifted into position.
     */
    function _nextExtraData(
        address from,
        address to,
        uint256 prevOwnershipPacked
    ) private view returns (uint256) {
        uint24 extraData = uint24(prevOwnershipPacked >> _BITPOS_EXTRA_DATA);
        return uint256(_extraData(from, to, extraData)) << _BITPOS_EXTRA_DATA;
    }

    // =============================================================
    //                       OTHER OPERATIONS
    // =============================================================

    /**
     * @dev Returns the message sender (defaults to `msg.sender`).
     *
     * If you are writing GSN compatible contracts, you need to override this function.
     */
    function _msgSenderERC721A() internal view virtual returns (address) {
        return msg.sender;
    }

    /**
     * @dev Converts a uint256 to its ASCII string decimal representation.
     */
    function _toString(uint256 value) internal pure virtual returns (string memory str) {
        assembly {
            // The maximum value of a uint256 contains 78 digits (1 byte per digit), but
            // we allocate 0xa0 bytes to keep the free memory pointer 32-byte word aligned.
            // We will need 1 word for the trailing zeros padding, 1 word for the length,
            // and 3 words for a maximum of 78 digits. Total: 5 * 0x20 = 0xa0.
            let m := add(mload(0x40), 0xa0)
            // Update the free memory pointer to allocate.
            mstore(0x40, m)
            // Assign the `str` to the end.
            str := sub(m, 0x20)
            // Zeroize the slot after the string.
            mstore(str, 0)

            // Cache the end of the memory to calculate the length later.
            let end := str

            // We write the string from rightmost digit to leftmost digit.
            // The following is essentially a do-while loop that also handles the zero case.
            // prettier-ignore
            for { let temp := value } 1 {} {
                str := sub(str, 1)
                // Write the character to the pointer.
                // The ASCII index of the '0' character is 48.
                mstore8(str, add(48, mod(temp, 10)))
                // Keep dividing `temp` until zero.
                temp := div(temp, 10)
                // prettier-ignore
                if iszero(temp) { break }
            }

            let length := sub(end, str)
            // Move the pointer 32 bytes leftwards to make room for the length.
            str := sub(str, 0x20)
            // Store the length.
            mstore(str, length)
        }
    }
}

// SPDX-License-Identifier: MIT
// ERC721A Contracts v4.2.3
// Creator: Chiru Labs

pragma solidity ^0.8.4;

/**
 * @dev Interface of ERC721A.
 */
interface IERC721A {
    /**
     * The caller must own the token or be an approved operator.
     */
    error ApprovalCallerNotOwnerNorApproved();

    /**
     * The token does not exist.
     */
    error ApprovalQueryForNonexistentToken();

    /**
     * Cannot query the balance for the zero address.
     */
    error BalanceQueryForZeroAddress();

    /**
     * Cannot mint to the zero address.
     */
    error MintToZeroAddress();

    /**
     * The quantity of tokens minted must be more than zero.
     */
    error MintZeroQuantity();

    /**
     * The token does not exist.
     */
    error OwnerQueryForNonexistentToken();

    /**
     * The caller must own the token or be an approved operator.
     */
    error TransferCallerNotOwnerNorApproved();

    /**
     * The token must be owned by `from`.
     */
    error TransferFromIncorrectOwner();

    /**
     * Cannot safely transfer to a contract that does not implement the
     * ERC721Receiver interface.
     */
    error TransferToNonERC721ReceiverImplementer();

    /**
     * Cannot transfer to the zero address.
     */
    error TransferToZeroAddress();

    /**
     * The token does not exist.
     */
    error URIQueryForNonexistentToken();

    /**
     * The `quantity` minted with ERC2309 exceeds the safety limit.
     */
    error MintERC2309QuantityExceedsLimit();

    /**
     * The `extraData` cannot be set on an unintialized ownership slot.
     */
    error OwnershipNotInitializedForExtraData();

    // =============================================================
    //                            STRUCTS
    // =============================================================

    struct TokenOwnership {
        // The address of the owner.
        address addr;
        // Stores the start time of ownership with minimal overhead for tokenomics.
        uint64 startTimestamp;
        // Whether the token has been burned.
        bool burned;
        // Arbitrary data similar to `startTimestamp` that can be set via {_extraData}.
        uint24 extraData;
    }

    // =============================================================
    //                         TOKEN COUNTERS
    // =============================================================

    /**
     * @dev Returns the total number of tokens in existence.
     * Burned tokens will reduce the count.
     * To get the total number of tokens minted, please see {_totalMinted}.
     */
    function totalSupply() external view returns (uint256);

    // =============================================================
    //                            IERC165
    // =============================================================

    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);

    // =============================================================
    //                            IERC721
    // =============================================================

    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables
     * (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in `owner`'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`,
     * checking first that contract recipients are aware of the ERC721 protocol
     * to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move
     * this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement
     * {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external payable;

    /**
     * @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external payable;

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom}
     * whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token
     * by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external payable;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the
     * zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external payable;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom}
     * for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    // =============================================================
    //                        IERC721Metadata
    // =============================================================

    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);

    // =============================================================
    //                           IERC2309
    // =============================================================

    /**
     * @dev Emitted when tokens in `fromTokenId` to `toTokenId`
     * (inclusive) is transferred from `from` to `to`, as defined in the
     * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309) standard.
     *
     * See {_mintERC2309} for more details.
     */
    event ConsecutiveTransfer(uint256 indexed fromTokenId, uint256 toTokenId, address indexed from, address indexed to);
}

{
  "optimizer": {
    "enabled": true,
    "runs": 1000
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"tokenAddress","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"BoostingInactive","type":"error"},{"inputs":[],"name":"InvalidBoostIdx","type":"error"},{"inputs":[],"name":"NoBoosterAtIdx","type":"error"},{"inputs":[],"name":"NotDnaInjector","type":"error"},{"inputs":[],"name":"NotEOA","type":"error"},{"inputs":[],"name":"NotTokenOwner","type":"error"},{"inputs":[],"name":"RerollInactive","type":"error"},{"inputs":[],"name":"TraitNotOnToken","type":"error"},{"inputs":[],"name":"TraitNotRerollable","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"boosterId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"tokenDna","type":"uint256"}],"name":"Boost","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"},{"indexed":true,"internalType":"uint256","name":"traitId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"tokenDna","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"boosterVal","type":"uint256"}],"name":"Bought","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"inputs":[],"name":"ARMORY_V1_PROVENANCE_HASH","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"AUCTION_PROVENANCE_HASH","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MINT_PROVENANCE_HASH","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"TOKEN_CONTRACT","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"activeBooster","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"uint256","name":"boosterIdx","type":"uint256"}],"name":"boost","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"boostingActive","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"dnaInjectorAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"dnaTranslatorCodeHash","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"getTokenDna","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256[]","name":"dna","type":"uint256[]"},{"internalType":"uint256[]","name":"tokenIds","type":"uint256[]"}],"name":"injectDna","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"numBoosts","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"uint256","name":"rerollTraitId","type":"uint256"}],"name":"reroll","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"rerollActive","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bool","name":"active","type":"bool"}],"name":"setBoostingActive","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"dnaInjector","type":"address"}],"name":"setDnaInjector","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"string","name":"codeHash","type":"string"}],"name":"setDnaTranslatorCodeHash","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"updatedNumBoosts","type":"uint256"}],"name":"setNumBoosts","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bool","name":"active","type":"bool"}],"name":"setRerollActive","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"setRerollToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"traitId","type":"uint256"},{"internalType":"bool","name":"rerollable","type":"bool"}],"name":"setTraitIdRerollable","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"traitIdRerollable","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"utilityAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"utilityTokenId","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"}]

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

000000000000000000000000231d3559aa848bf10366fb9868590f01d34bf240

-----Decoded View---------------
Arg [0] : tokenAddress (address): 0x231d3559aa848Bf10366fB9868590F01d34bF240

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 000000000000000000000000231d3559aa848bf10366fb9868590f01d34bf240