Contract

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.19;

import {ITypeAndVersion} from "../../shared/interfaces/ITypeAndVersion.sol";

import {IRouterClient} from "../interfaces/IRouterClient.sol";
import {IWrappedNative} from "../interfaces/IWrappedNative.sol";

import {Client} from "./../libraries/Client.sol";
import {CCIPReceiver} from "./CCIPReceiver.sol";

import {IERC20} from "../../vendor/openzeppelin-solidity/v4.8.3/contracts/token/ERC20/IERC20.sol";
import {SafeERC20} from "../../vendor/openzeppelin-solidity/v4.8.3/contracts/token/ERC20/utils/SafeERC20.sol";

interface CCIPRouter {
  function getWrappedNative() external view returns (address);
}

/// @notice A contract that can send raw ether cross-chain using CCIP.
/// Since CCIP only supports ERC-20 token transfers, this contract accepts
/// normal ether, wraps it, and uses CCIP to send it cross-chain.
/// On the receiving side, the wrapped ether is unwrapped and sent to the final receiver.
/// @notice This contract only supports chains where the wrapped native contract
/// is the WETH contract (i.e not WMATIC, or WAVAX, etc.). This is because the
/// receiving contract will always unwrap the ether using it's local wrapped native contract.
/// @dev This contract is both a sender and a receiver. This same contract can be
/// deployed on source and destination chains to facilitate cross-chain ether transfers
/// and act as a sender and a receiver.
/// @dev This contract is intentionally ownerless and permissionless. This contract
/// will never hold any excess funds, native or otherwise, when used correctly.
contract EtherSenderReceiver is CCIPReceiver, ITypeAndVersion {
  using SafeERC20 for IERC20;

  error InvalidTokenAmounts(uint256 gotAmounts);
  error InvalidToken(address gotToken, address expectedToken);
  error TokenAmountNotEqualToMsgValue(uint256 gotAmount, uint256 msgValue);
  error InsufficientMsgValue(uint256 gotAmount, uint256 msgValue);
  error InsufficientFee(uint256 gotFee, uint256 fee);
  error GasLimitTooLow(uint256 minLimit, uint256 gotLimit);

  string public constant override typeAndVersion = "EtherSenderReceiver 1.5.0";

  /// @notice The wrapped native token address.
  /// @dev If the wrapped native token address changes on the router, this contract will need to be redeployed.
  IWrappedNative public immutable i_weth;

  /// @param router The CCIP router address.
  constructor(address router) CCIPReceiver(router) {
    i_weth = IWrappedNative(CCIPRouter(router).getWrappedNative());
    i_weth.approve(router, type(uint256).max);
  }

  /// @notice Need this in order to unwrap correctly.
  receive() external payable {}

  /// @notice Get the fee for sending a message to a destination chain.
  /// This is mirrored from the router for convenience, construct the appropriate
  /// message and get it's fee.
  /// @param destinationChainSelector The destination chainSelector
  /// @param message The cross-chain CCIP message including data and/or tokens
  /// @return fee returns execution fee for the message
  /// delivery to destination chain, denominated in the feeToken specified in the message.
  /// @dev Reverts with appropriate reason upon invalid message.
  function getFee(
    uint64 destinationChainSelector,
    Client.EVM2AnyMessage calldata message
  ) external view returns (uint256 fee) {
    Client.EVM2AnyMessage memory validatedMessage = _validatedMessage(message);

    return IRouterClient(getRouter()).getFee(destinationChainSelector, validatedMessage);
  }

  /// @notice Send raw native tokens cross-chain.
  /// @param destinationChainSelector The destination chain selector.
  /// @param message The CCIP message with the following fields correctly set:
  /// - bytes receiver: The _contract_ address on the destination chain that will receive the wrapped ether.
  /// The caller must ensure that this contract address is correct, otherwise funds may be lost forever.
  /// - address feeToken: The fee token address. Must be address(0) for native tokens, or a supported CCIP fee token otherwise (i.e, LINK token).
  /// In the event a feeToken is set, we will transferFrom the caller the fee amount before sending the message, in order to forward them to the router.
  /// - EVMTokenAmount[] tokenAmounts: The tokenAmounts array must contain a single element with the following fields:
  ///   - uint256 amount: The amount of ether to send.
  /// There are a couple of cases here that depend on the fee token specified:
  /// 1. If feeToken == address(0), the fee must be included in msg.value. Therefore tokenAmounts[0].amount must be less than msg.value,
  ///    and the difference will be used as the fee.
  /// 2. If feeToken != address(0), the fee is not included in msg.value, and tokenAmounts[0].amount must be equal to msg.value.
  ///    these fees to the CCIP router.
  /// @return messageId The CCIP message ID.
  function ccipSend(
    uint64 destinationChainSelector,
    Client.EVM2AnyMessage calldata message
  ) external payable returns (bytes32) {
    _validateFeeToken(message);
    Client.EVM2AnyMessage memory validatedMessage = _validatedMessage(message);

    i_weth.deposit{value: validatedMessage.tokenAmounts[0].amount}();

    uint256 fee = IRouterClient(getRouter()).getFee(destinationChainSelector, validatedMessage);
    if (validatedMessage.feeToken != address(0)) {
      // If the fee token is not native, we need to transfer the fee to this contract and re-approve it to the router.
      // Its not possible to have any leftover tokens in this path because we transferFrom the exact fee that CCIP
      // requires from the caller.
      IERC20(validatedMessage.feeToken).safeTransferFrom(msg.sender, address(this), fee);

      // We gave an infinite approval of weth to the router in the constructor.
      if (validatedMessage.feeToken != address(i_weth)) {
        IERC20(validatedMessage.feeToken).approve(getRouter(), fee);
      }

      return IRouterClient(getRouter()).ccipSend(destinationChainSelector, validatedMessage);
    }

    // We don't want to keep any excess ether in this contract, so we send over the entire address(this).balance as the fee.
    // CCIP will revert if the fee is insufficient, so we don't need to check here.
    return IRouterClient(getRouter()).ccipSend{value: address(this).balance}(destinationChainSelector, validatedMessage);
  }

  /// @notice Validate the message content.
  /// @dev Only allows a single token to be sent. Always overwritten to be address(i_weth)
  /// and receiver is always msg.sender.
  function _validatedMessage(Client.EVM2AnyMessage calldata message)
    internal
    view
    returns (Client.EVM2AnyMessage memory)
  {
    Client.EVM2AnyMessage memory validatedMessage = message;

    if (validatedMessage.tokenAmounts.length != 1) {
      revert InvalidTokenAmounts(validatedMessage.tokenAmounts.length);
    }

    validatedMessage.data = abi.encode(msg.sender);
    validatedMessage.tokenAmounts[0].token = address(i_weth);

    return validatedMessage;
  }

  function _validateFeeToken(Client.EVM2AnyMessage calldata message) internal view {
    uint256 tokenAmount = message.tokenAmounts[0].amount;

    if (message.feeToken != address(0)) {
      // If the fee token is NOT native, then the token amount must be equal to msg.value.
      // This is done to ensure that there is no leftover ether in this contract.
      if (msg.value != tokenAmount) {
        revert TokenAmountNotEqualToMsgValue(tokenAmount, msg.value);
      }
    }
  }

  /// @notice Receive the wrapped ether, unwrap it, and send it to the specified EOA in the data field.
  /// @param message The CCIP message containing the wrapped ether amount and the final receiver.
  /// @dev The code below should never revert if the message being is valid according
  /// to the above _validatedMessage and _validateFeeToken functions.
  function _ccipReceive(Client.Any2EVMMessage memory message) internal override {
    address receiver = abi.decode(message.data, (address));

    if (message.destTokenAmounts.length != 1) {
      revert InvalidTokenAmounts(message.destTokenAmounts.length);
    }

    if (message.destTokenAmounts[0].token != address(i_weth)) {
      revert InvalidToken(message.destTokenAmounts[0].token, address(i_weth));
    }

    uint256 tokenAmount = message.destTokenAmounts[0].amount;
    i_weth.withdraw(tokenAmount);

    // it is possible that the below call may fail if receiver.code.length > 0 and the contract
    // doesn't e.g have a receive() or a fallback() function.
    (bool success,) = payable(receiver).call{value: tokenAmount}("");
    if (!success) {
      // We have a few options here:
      // 1. Revert: this is bad generally because it may mean that these tokens are stuck.
      // 2. Store the tokens in a mapping and allow the user to withdraw them with another tx.
      // 3. Send WETH to the receiver address.
      // We opt for (3) here because at least the receiver will have the funds and can unwrap them if needed.
      // However it is worth noting that if receiver is actually a contract AND the contract _cannot_ withdraw
      // the WETH, then the WETH will be stuck in this contract.
      i_weth.deposit{value: tokenAmount}();
      i_weth.transfer(receiver, tokenAmount);
    }
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface ITypeAndVersion {
  function typeAndVersion() external pure returns (string memory);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {Client} from "../libraries/Client.sol";

interface IRouterClient {
  error UnsupportedDestinationChain(uint64 destChainSelector);
  error InsufficientFeeTokenAmount();
  error InvalidMsgValue();

  /// @notice Checks if the given chain ID is supported for sending/receiving.
  /// @param chainSelector The chain to check.
  /// @return supported is true if it is supported, false if not.
  function isChainSupported(uint64 chainSelector) external view returns (bool supported);

  /// @notice Gets a list of all supported tokens which can be sent or received
  /// to/from a given chain id.
  /// @param chainSelector The chainSelector.
  /// @return tokens The addresses of all tokens that are supported.
  function getSupportedTokens(uint64 chainSelector) external view returns (address[] memory tokens);

  /// @param destinationChainSelector The destination chainSelector
  /// @param message The cross-chain CCIP message including data and/or tokens
  /// @return fee returns execution fee for the message
  /// delivery to destination chain, denominated in the feeToken specified in the message.
  /// @dev Reverts with appropriate reason upon invalid message.
  function getFee(
    uint64 destinationChainSelector,
    Client.EVM2AnyMessage memory message
  ) external view returns (uint256 fee);

  /// @notice Request a message to be sent to the destination chain
  /// @param destinationChainSelector The destination chain ID
  /// @param message The cross-chain CCIP message including data and/or tokens
  /// @return messageId The message ID
  /// @dev Note if msg.value is larger than the required fee (from getFee) we accept
  /// the overpayment with no refund.
  /// @dev Reverts with appropriate reason upon invalid message.
  function ccipSend(
    uint64 destinationChainSelector,
    Client.EVM2AnyMessage calldata message
  ) external payable returns (bytes32);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IERC20} from "../../vendor/openzeppelin-solidity/v4.8.3/contracts/token/ERC20/IERC20.sol";

interface IWrappedNative is IERC20 {
  function deposit() external payable;

  function withdraw(uint256 wad) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

// End consumer library.
library Client {
  /// @dev RMN depends on this struct, if changing, please notify the RMN maintainers.
  struct EVMTokenAmount {
    address token; // token address on the local chain.
    uint256 amount; // Amount of tokens.
  }

  struct Any2EVMMessage {
    bytes32 messageId; // MessageId corresponding to ccipSend on source.
    uint64 sourceChainSelector; // Source chain selector.
    bytes sender; // abi.decode(sender) if coming from an EVM chain.
    bytes data; // payload sent in original message.
    EVMTokenAmount[] destTokenAmounts; // Tokens and their amounts in their destination chain representation.
  }

  // If extraArgs is empty bytes, the default is 200k gas limit.
  struct EVM2AnyMessage {
    bytes receiver; // abi.encode(receiver address) for dest EVM chains
    bytes data; // Data payload
    EVMTokenAmount[] tokenAmounts; // Token transfers
    address feeToken; // Address of feeToken. address(0) means you will send msg.value.
    bytes extraArgs; // Populate this with _argsToBytes(EVMExtraArgsV1)
  }

  // bytes4(keccak256("CCIP EVMExtraArgsV1"));
  bytes4 public constant EVM_EXTRA_ARGS_V1_TAG = 0x97a657c9;

  struct EVMExtraArgsV1 {
    uint256 gasLimit;
  }

  function _argsToBytes(EVMExtraArgsV1 memory extraArgs) internal pure returns (bytes memory bts) {
    return abi.encodeWithSelector(EVM_EXTRA_ARGS_V1_TAG, extraArgs);
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IAny2EVMMessageReceiver} from "../interfaces/IAny2EVMMessageReceiver.sol";

import {Client} from "../libraries/Client.sol";

import {IERC165} from "../../vendor/openzeppelin-solidity/v4.8.3/contracts/utils/introspection/IERC165.sol";

/// @title CCIPReceiver - Base contract for CCIP applications that can receive messages.
abstract contract CCIPReceiver is IAny2EVMMessageReceiver, IERC165 {
  address internal immutable i_ccipRouter;

  constructor(address router) {
    if (router == address(0)) revert InvalidRouter(address(0));
    i_ccipRouter = router;
  }

  /// @notice IERC165 supports an interfaceId
  /// @param interfaceId The interfaceId to check
  /// @return true if the interfaceId is supported
  /// @dev Should indicate whether the contract implements IAny2EVMMessageReceiver
  /// e.g. return interfaceId == type(IAny2EVMMessageReceiver).interfaceId || interfaceId == type(IERC165).interfaceId
  /// This allows CCIP to check if ccipReceive is available before calling it.
  /// If this returns false or reverts, only tokens are transferred to the receiver.
  /// If this returns true, tokens are transferred and ccipReceive is called atomically.
  /// Additionally, if the receiver address does not have code associated with
  /// it at the time of execution (EXTCODESIZE returns 0), only tokens will be transferred.
  function supportsInterface(bytes4 interfaceId) public pure virtual override returns (bool) {
    return interfaceId == type(IAny2EVMMessageReceiver).interfaceId || interfaceId == type(IERC165).interfaceId;
  }

  /// @inheritdoc IAny2EVMMessageReceiver
  function ccipReceive(Client.Any2EVMMessage calldata message) external virtual override onlyRouter {
    _ccipReceive(message);
  }

  /// @notice Override this function in your implementation.
  /// @param message Any2EVMMessage
  function _ccipReceive(Client.Any2EVMMessage memory message) internal virtual;

  /////////////////////////////////////////////////////////////////////
  // Plumbing
  /////////////////////////////////////////////////////////////////////

  /// @notice Return the current router
  /// @return CCIP router address
  function getRouter() public view returns (address) {
    return address(i_ccipRouter);
  }

  error InvalidRouter(address router);

  /// @dev only calls from the set router are accepted.
  modifier onlyRouter() {
    if (msg.sender != address(i_ccipRouter)) revert InvalidRouter(msg.sender);
    _;
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);

  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);

  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);

  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);

  /**
   * @dev Moves `amount` tokens from the caller's account to `to`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address to, uint256 amount) external returns (bool);

  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(address owner, address spender) external view returns (uint256);

  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);

  /**
   * @dev Moves `amount` tokens from `from` to `to` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
  using Address for address;

  function safeTransfer(IERC20 token, address to, uint256 value) internal {
    _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
  }

  function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
    _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
  }

  /**
   * @dev Deprecated. This function has issues similar to the ones found in
   * {IERC20-approve}, and its usage is discouraged.
   *
   * Whenever possible, use {safeIncreaseAllowance} and
   * {safeDecreaseAllowance} instead.
   */
  function safeApprove(IERC20 token, address spender, uint256 value) internal {
    // safeApprove should only be called when setting an initial allowance,
    // or when resetting it to zero. To increase and decrease it, use
    // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
    require(
      (value == 0) || (token.allowance(address(this), spender) == 0),
      "SafeERC20: approve from non-zero to non-zero allowance"
    );
    _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
  }

  function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
    uint256 newAllowance = token.allowance(address(this), spender) + value;
    _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
  }

  function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
    unchecked {
      uint256 oldAllowance = token.allowance(address(this), spender);
      require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
      uint256 newAllowance = oldAllowance - value;
      _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
  }

  function safePermit(
    IERC20Permit token,
    address owner,
    address spender,
    uint256 value,
    uint256 deadline,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) internal {
    uint256 nonceBefore = token.nonces(owner);
    token.permit(owner, spender, value, deadline, v, r, s);
    uint256 nonceAfter = token.nonces(owner);
    require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
  }

  /**
   * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
   * on the return value: the return value is optional (but if data is returned, it must not be false).
   * @param token The token targeted by the call.
   * @param data The call data (encoded using abi.encode or one of its variants).
   */
  function _callOptionalReturn(IERC20 token, bytes memory data) private {
    // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
    // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
    // the target address contains contract code and also asserts for success in the low-level call.

    bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
    if (returndata.length > 0) {
      // Return data is optional
      require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {Client} from "../libraries/Client.sol";

/// @notice Application contracts that intend to receive messages from
/// the router should implement this interface.
interface IAny2EVMMessageReceiver {
  /// @notice Called by the Router to deliver a message.
  /// If this reverts, any token transfers also revert. The message
  /// will move to a FAILED state and become available for manual execution.
  /// @param message CCIP Message
  /// @dev Note ensure you check the msg.sender is the OffRampRouter
  function ccipReceive(Client.Any2EVMMessage calldata message) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
  /**
   * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
   * given ``owner``'s signed approval.
   *
   * IMPORTANT: The same issues {IERC20-approve} has related to transaction
   * ordering also apply here.
   *
   * Emits an {Approval} event.
   *
   * Requirements:
   *
   * - `spender` cannot be the zero address.
   * - `deadline` must be a timestamp in the future.
   * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
   * over the EIP712-formatted function arguments.
   * - the signature must use ``owner``'s current nonce (see {nonces}).
   *
   * For more information on the signature format, see the
   * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
   * section].
   */
  function permit(
    address owner,
    address spender,
    uint256 value,
    uint256 deadline,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external;

  /**
   * @dev Returns the current nonce for `owner`. This value must be
   * included whenever a signature is generated for {permit}.
   *
   * Every successful call to {permit} increases ``owner``'s nonce by one. This
   * prevents a signature from being used multiple times.
   */
  function nonces(address owner) external view returns (uint256);

  /**
   * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
   */
  // solhint-disable-next-line func-name-mixedcase
  function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
  /**
   * @dev Returns true if `account` is a contract.
   *
   * [IMPORTANT]
   * ====
   * It is unsafe to assume that an address for which this function returns
   * false is an externally-owned account (EOA) and not a contract.
   *
   * Among others, `isContract` will return false for the following
   * types of addresses:
   *
   *  - an externally-owned account
   *  - a contract in construction
   *  - an address where a contract will be created
   *  - an address where a contract lived, but was destroyed
   * ====
   *
   * [IMPORTANT]
   * ====
   * You shouldn't rely on `isContract` to protect against flash loan attacks!
   *
   * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
   * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
   * constructor.
   * ====
   */
  function isContract(address account) internal view returns (bool) {
    // This method relies on extcodesize/address.code.length, which returns 0
    // for contracts in construction, since the code is only stored at the end
    // of the constructor execution.

    return account.code.length > 0;
  }

  /**
   * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
   * `recipient`, forwarding all available gas and reverting on errors.
   *
   * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
   * of certain opcodes, possibly making contracts go over the 2300 gas limit
   * imposed by `transfer`, making them unable to receive funds via
   * `transfer`. {sendValue} removes this limitation.
   *
   * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
   *
   * IMPORTANT: because control is transferred to `recipient`, care must be
   * taken to not create reentrancy vulnerabilities. Consider using
   * {ReentrancyGuard} or the
   * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
   */
  function sendValue(address payable recipient, uint256 amount) internal {
    require(address(this).balance >= amount, "Address: insufficient balance");

    (bool success, ) = recipient.call{value: amount}("");
    require(success, "Address: unable to send value, recipient may have reverted");
  }

  /**
   * @dev Performs a Solidity function call using a low level `call`. A
   * plain `call` is an unsafe replacement for a function call: use this
   * function instead.
   *
   * If `target` reverts with a revert reason, it is bubbled up by this
   * function (like regular Solidity function calls).
   *
   * Returns the raw returned data. To convert to the expected return value,
   * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
   *
   * Requirements:
   *
   * - `target` must be a contract.
   * - calling `target` with `data` must not revert.
   *
   * _Available since v3.1._
   */
  function functionCall(address target, bytes memory data) internal returns (bytes memory) {
    return functionCallWithValue(target, data, 0, "Address: low-level call failed");
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
   * `errorMessage` as a fallback revert reason when `target` reverts.
   *
   * _Available since v3.1._
   */
  function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
    return functionCallWithValue(target, data, 0, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but also transferring `value` wei to `target`.
   *
   * Requirements:
   *
   * - the calling contract must have an ETH balance of at least `value`.
   * - the called Solidity function must be `payable`.
   *
   * _Available since v3.1._
   */
  function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
    return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
  }

  /**
   * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
   * with `errorMessage` as a fallback revert reason when `target` reverts.
   *
   * _Available since v3.1._
   */
  function functionCallWithValue(
    address target,
    bytes memory data,
    uint256 value,
    string memory errorMessage
  ) internal returns (bytes memory) {
    require(address(this).balance >= value, "Address: insufficient balance for call");
    (bool success, bytes memory returndata) = target.call{value: value}(data);
    return verifyCallResultFromTarget(target, success, returndata, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but performing a static call.
   *
   * _Available since v3.3._
   */
  function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
    return functionStaticCall(target, data, "Address: low-level static call failed");
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
   * but performing a static call.
   *
   * _Available since v3.3._
   */
  function functionStaticCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal view returns (bytes memory) {
    (bool success, bytes memory returndata) = target.staticcall(data);
    return verifyCallResultFromTarget(target, success, returndata, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but performing a delegate call.
   *
   * _Available since v3.4._
   */
  function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
    return functionDelegateCall(target, data, "Address: low-level delegate call failed");
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
   * but performing a delegate call.
   *
   * _Available since v3.4._
   */
  function functionDelegateCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal returns (bytes memory) {
    (bool success, bytes memory returndata) = target.delegatecall(data);
    return verifyCallResultFromTarget(target, success, returndata, errorMessage);
  }

  /**
   * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
   * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
   *
   * _Available since v4.8._
   */
  function verifyCallResultFromTarget(
    address target,
    bool success,
    bytes memory returndata,
    string memory errorMessage
  ) internal view returns (bytes memory) {
    if (success) {
      if (returndata.length == 0) {
        // only check isContract if the call was successful and the return data is empty
        // otherwise we already know that it was a contract
        require(isContract(target), "Address: call to non-contract");
      }
      return returndata;
    } else {
      _revert(returndata, errorMessage);
    }
  }

  /**
   * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
   * revert reason or using the provided one.
   *
   * _Available since v4.3._
   */
  function verifyCallResult(
    bool success,
    bytes memory returndata,
    string memory errorMessage
  ) internal pure returns (bytes memory) {
    if (success) {
      return returndata;
    } else {
      _revert(returndata, errorMessage);
    }
  }

  function _revert(bytes memory returndata, string memory errorMessage) private pure {
    // Look for revert reason and bubble it up if present
    if (returndata.length > 0) {
      // The easiest way to bubble the revert reason is using memory via assembly
      /// @solidity memory-safe-assembly
      assembly {
        let returndata_size := mload(returndata)
        revert(add(32, returndata), returndata_size)
      }
    } else {
      revert(errorMessage);
    }
  }
}

{
  "remappings": [
    "ds-test/=foundry-lib/forge-std/lib/ds-test/src/",
    "forge-std/=foundry-lib/forge-std/src/",
    "@openzeppelin/=node_modules/@openzeppelin/",
    "@arbitrum/=node_modules/@arbitrum/",
    "hardhat/=node_modules/hardhat/",
    "@eth-optimism/=node_modules/@eth-optimism/",
    "@scroll-tech/=node_modules/@scroll-tech/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 10000
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "none",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "paris",
  "viaIR": false,
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"router","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"uint256","name":"minLimit","type":"uint256"},{"internalType":"uint256","name":"gotLimit","type":"uint256"}],"name":"GasLimitTooLow","type":"error"},{"inputs":[{"internalType":"uint256","name":"gotFee","type":"uint256"},{"internalType":"uint256","name":"fee","type":"uint256"}],"name":"InsufficientFee","type":"error"},{"inputs":[{"internalType":"uint256","name":"gotAmount","type":"uint256"},{"internalType":"uint256","name":"msgValue","type":"uint256"}],"name":"InsufficientMsgValue","type":"error"},{"inputs":[{"internalType":"address","name":"router","type":"address"}],"name":"InvalidRouter","type":"error"},{"inputs":[{"internalType":"address","name":"gotToken","type":"address"},{"internalType":"address","name":"expectedToken","type":"address"}],"name":"InvalidToken","type":"error"},{"inputs":[{"internalType":"uint256","name":"gotAmounts","type":"uint256"}],"name":"InvalidTokenAmounts","type":"error"},{"inputs":[{"internalType":"uint256","name":"gotAmount","type":"uint256"},{"internalType":"uint256","name":"msgValue","type":"uint256"}],"name":"TokenAmountNotEqualToMsgValue","type":"error"},{"inputs":[{"components":[{"internalType":"bytes32","name":"messageId","type":"bytes32"},{"internalType":"uint64","name":"sourceChainSelector","type":"uint64"},{"internalType":"bytes","name":"sender","type":"bytes"},{"internalType":"bytes","name":"data","type":"bytes"},{"components":[{"internalType":"address","name":"token","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"internalType":"struct Client.EVMTokenAmount[]","name":"destTokenAmounts","type":"tuple[]"}],"internalType":"struct Client.Any2EVMMessage","name":"message","type":"tuple"}],"name":"ccipReceive","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint64","name":"destinationChainSelector","type":"uint64"},{"components":[{"internalType":"bytes","name":"receiver","type":"bytes"},{"internalType":"bytes","name":"data","type":"bytes"},{"components":[{"internalType":"address","name":"token","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"internalType":"struct Client.EVMTokenAmount[]","name":"tokenAmounts","type":"tuple[]"},{"internalType":"address","name":"feeToken","type":"address"},{"internalType":"bytes","name":"extraArgs","type":"bytes"}],"internalType":"struct Client.EVM2AnyMessage","name":"message","type":"tuple"}],"name":"ccipSend","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"uint64","name":"destinationChainSelector","type":"uint64"},{"components":[{"internalType":"bytes","name":"receiver","type":"bytes"},{"internalType":"bytes","name":"data","type":"bytes"},{"components":[{"internalType":"address","name":"token","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"internalType":"struct Client.EVMTokenAmount[]","name":"tokenAmounts","type":"tuple[]"},{"internalType":"address","name":"feeToken","type":"address"},{"internalType":"bytes","name":"extraArgs","type":"bytes"}],"internalType":"struct Client.EVM2AnyMessage","name":"message","type":"tuple"}],"name":"getFee","outputs":[{"internalType":"uint256","name":"fee","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getRouter","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"i_weth","outputs":[{"internalType":"contract IWrappedNative","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"typeAndVersion","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

00000000000000000000000080226fc0ee2b096224eeac085bb9a8cba1146f7d

-----Decoded View---------------
Arg [0] : router (address): 0x80226fc0Ee2b096224EeAc085Bb9a8cba1146f7D

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 00000000000000000000000080226fc0ee2b096224eeac085bb9a8cba1146f7d