// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.8.26;

import {Ownable} from "solady/auth/Ownable.sol";
import {UUPSUpgradeable} from "solady/utils/UUPSUpgradeable.sol";
import {Initializable} from "solady/utils/Initializable.sol";
import {BadgerBoxes} from "./BadgerBoxes.sol";
import {MoneyBadgers} from "./MoneyBadgers.sol";

error InvalidTokenId();
error BadgerBoxNotOwned();

/// @title MoneyBadgersMinter
/// @notice Upgradable contract that handles burning BadgerBoxes and minting MoneyBadgers
/// @notice SECURITY: Only burnAndMint() interacts with BadgerBoxes to maintain security
contract MoneyBadgersMinter is Ownable, UUPSUpgradeable, Initializable {
    BadgerBoxes public immutable BADGERBOXES;
    MoneyBadgers public immutable MONEYBADGERS;
    
    // Track which BadgerBox token IDs have been burned (allows MoneyBadgers minting)
    mapping(uint256 => bool) public badgerBoxBurned;
    
    // Well-known burn address (0x000000000000000000000000000000000000dEaD)
    // Used to effectively "burn" BadgerBoxes since the contract doesn't expose a burn function
    address private constant BURN_ADDRESS = address(0x000000000000000000000000000000000000dEaD);

    /// @custom:oz-upgrades-unsafe-allow constructor
    constructor(address _badgerBoxes, address _moneyBadgers) {
        _disableInitializers();
        BADGERBOXES = BadgerBoxes(_badgerBoxes);
        MONEYBADGERS = MoneyBadgers(_moneyBadgers);
    }

    /// @notice Initialize the MoneyBadgersMinter contract
    /// @param _owner The owner of the contract
    function initialize(address _owner) public {
        _initializeOwner(_owner);
    }

    /// @notice Burn BadgerBox and mint MoneyBadgers in one call
    /// @param badgerBoxTokenId The BadgerBox token ID to burn
    /// @return The minted MoneyBadgers token ID
    /// @dev SECURITY: This is the ONLY function that interacts with BadgerBoxes to maintain security.
    ///      Flow: User approves this contract once via setApprovalForAll → calls this function → 
    ///      contract transfers BadgerBox from user to burn address → mints MoneyBadgers
    ///      The BadgerBox is transferred to the burn address (0x0000...dEaD) since BadgerBoxes doesn't expose a burn function.
    ///      This effectively removes the token from circulation permanently.
    ///      REQUIREMENT: User must approve this contract on BadgerBoxes first (one-time via setApprovalForAll).
    ///      This function uses msg.sender (the user) for ownership verification and transferFrom call.
    function burnAndMint(uint256 badgerBoxTokenId) external returns (uint256) {
        if (badgerBoxBurned[badgerBoxTokenId]) {
            revert InvalidTokenId();
        }

        address user = msg.sender;

        // Verify the user owns the BadgerBox
        if (BADGERBOXES.ownerOf(badgerBoxTokenId) != user) {
            revert BadgerBoxNotOwned();
        }

        // Transfer BadgerBox from user to burn address (requires approval from user via setApprovalForAll)
        // The burn address (0x0000...dEaD) is a well-known address that can never use the token
        BADGERBOXES.transferFrom(user, BURN_ADDRESS, badgerBoxTokenId);
        badgerBoxBurned[badgerBoxTokenId] = true;

        // Mint MoneyBadgers with the same token ID to the user (no signature needed - authorized minter)
        MONEYBADGERS.mintByMinter(user, badgerBoxTokenId);
        
        return badgerBoxTokenId;
    }


    /// @notice Authorize upgrade (UUPS)
    function _authorizeUpgrade(address) internal override onlyOwner {}
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

/// @notice Simple single owner authorization mixin.
/// @author Solady (https://github.com/vectorized/solady/blob/main/src/auth/Ownable.sol)
///
/// @dev Note:
/// This implementation does NOT auto-initialize the owner to `msg.sender`.
/// You MUST call the `_initializeOwner` in the constructor / initializer.
///
/// While the ownable portion follows
/// [EIP-173](https://eips.ethereum.org/EIPS/eip-173) for compatibility,
/// the nomenclature for the 2-step ownership handover may be unique to this codebase.
abstract contract Ownable {
    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                       CUSTOM ERRORS                        */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev The caller is not authorized to call the function.
    error Unauthorized();

    /// @dev The `newOwner` cannot be the zero address.
    error NewOwnerIsZeroAddress();

    /// @dev The `pendingOwner` does not have a valid handover request.
    error NoHandoverRequest();

    /// @dev Cannot double-initialize.
    error AlreadyInitialized();

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                           EVENTS                           */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev The ownership is transferred from `oldOwner` to `newOwner`.
    /// This event is intentionally kept the same as OpenZeppelin's Ownable to be
    /// compatible with indexers and [EIP-173](https://eips.ethereum.org/EIPS/eip-173),
    /// despite it not being as lightweight as a single argument event.
    event OwnershipTransferred(address indexed oldOwner, address indexed newOwner);

    /// @dev An ownership handover to `pendingOwner` has been requested.
    event OwnershipHandoverRequested(address indexed pendingOwner);

    /// @dev The ownership handover to `pendingOwner` has been canceled.
    event OwnershipHandoverCanceled(address indexed pendingOwner);

    /// @dev `keccak256(bytes("OwnershipTransferred(address,address)"))`.
    uint256 private constant _OWNERSHIP_TRANSFERRED_EVENT_SIGNATURE =
        0x8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e0;

    /// @dev `keccak256(bytes("OwnershipHandoverRequested(address)"))`.
    uint256 private constant _OWNERSHIP_HANDOVER_REQUESTED_EVENT_SIGNATURE =
        0xdbf36a107da19e49527a7176a1babf963b4b0ff8cde35ee35d6cd8f1f9ac7e1d;

    /// @dev `keccak256(bytes("OwnershipHandoverCanceled(address)"))`.
    uint256 private constant _OWNERSHIP_HANDOVER_CANCELED_EVENT_SIGNATURE =
        0xfa7b8eab7da67f412cc9575ed43464468f9bfbae89d1675917346ca6d8fe3c92;

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                          STORAGE                           */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev The owner slot is given by:
    /// `bytes32(~uint256(uint32(bytes4(keccak256("_OWNER_SLOT_NOT")))))`.
    /// It is intentionally chosen to be a high value
    /// to avoid collision with lower slots.
    /// The choice of manual storage layout is to enable compatibility
    /// with both regular and upgradeable contracts.
    bytes32 internal constant _OWNER_SLOT =
        0xffffffffffffffffffffffffffffffffffffffffffffffffffffffff74873927;

    /// The ownership handover slot of `newOwner` is given by:
    /// ```
    ///     mstore(0x00, or(shl(96, user), _HANDOVER_SLOT_SEED))
    ///     let handoverSlot := keccak256(0x00, 0x20)
    /// ```
    /// It stores the expiry timestamp of the two-step ownership handover.
    uint256 private constant _HANDOVER_SLOT_SEED = 0x389a75e1;

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                     INTERNAL FUNCTIONS                     */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Override to return true to make `_initializeOwner` prevent double-initialization.
    function _guardInitializeOwner() internal pure virtual returns (bool guard) {}

    /// @dev Initializes the owner directly without authorization guard.
    /// This function must be called upon initialization,
    /// regardless of whether the contract is upgradeable or not.
    /// This is to enable generalization to both regular and upgradeable contracts,
    /// and to save gas in case the initial owner is not the caller.
    /// For performance reasons, this function will not check if there
    /// is an existing owner.
    function _initializeOwner(address newOwner) internal virtual {
        if (_guardInitializeOwner()) {
            /// @solidity memory-safe-assembly
            assembly {
                let ownerSlot := _OWNER_SLOT
                if sload(ownerSlot) {
                    mstore(0x00, 0x0dc149f0) // `AlreadyInitialized()`.
                    revert(0x1c, 0x04)
                }
                // Clean the upper 96 bits.
                newOwner := shr(96, shl(96, newOwner))
                // Store the new value.
                sstore(ownerSlot, or(newOwner, shl(255, iszero(newOwner))))
                // Emit the {OwnershipTransferred} event.
                log3(0, 0, _OWNERSHIP_TRANSFERRED_EVENT_SIGNATURE, 0, newOwner)
            }
        } else {
            /// @solidity memory-safe-assembly
            assembly {
                // Clean the upper 96 bits.
                newOwner := shr(96, shl(96, newOwner))
                // Store the new value.
                sstore(_OWNER_SLOT, newOwner)
                // Emit the {OwnershipTransferred} event.
                log3(0, 0, _OWNERSHIP_TRANSFERRED_EVENT_SIGNATURE, 0, newOwner)
            }
        }
    }

    /// @dev Sets the owner directly without authorization guard.
    function _setOwner(address newOwner) internal virtual {
        if (_guardInitializeOwner()) {
            /// @solidity memory-safe-assembly
            assembly {
                let ownerSlot := _OWNER_SLOT
                // Clean the upper 96 bits.
                newOwner := shr(96, shl(96, newOwner))
                // Emit the {OwnershipTransferred} event.
                log3(0, 0, _OWNERSHIP_TRANSFERRED_EVENT_SIGNATURE, sload(ownerSlot), newOwner)
                // Store the new value.
                sstore(ownerSlot, or(newOwner, shl(255, iszero(newOwner))))
            }
        } else {
            /// @solidity memory-safe-assembly
            assembly {
                let ownerSlot := _OWNER_SLOT
                // Clean the upper 96 bits.
                newOwner := shr(96, shl(96, newOwner))
                // Emit the {OwnershipTransferred} event.
                log3(0, 0, _OWNERSHIP_TRANSFERRED_EVENT_SIGNATURE, sload(ownerSlot), newOwner)
                // Store the new value.
                sstore(ownerSlot, newOwner)
            }
        }
    }

    /// @dev Throws if the sender is not the owner.
    function _checkOwner() internal view virtual {
        /// @solidity memory-safe-assembly
        assembly {
            // If the caller is not the stored owner, revert.
            if iszero(eq(caller(), sload(_OWNER_SLOT))) {
                mstore(0x00, 0x82b42900) // `Unauthorized()`.
                revert(0x1c, 0x04)
            }
        }
    }

    /// @dev Returns how long a two-step ownership handover is valid for in seconds.
    /// Override to return a different value if needed.
    /// Made internal to conserve bytecode. Wrap it in a public function if needed.
    function _ownershipHandoverValidFor() internal view virtual returns (uint64) {
        return 48 * 3600;
    }

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                  PUBLIC UPDATE FUNCTIONS                   */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Allows the owner to transfer the ownership to `newOwner`.
    function transferOwnership(address newOwner) public payable virtual onlyOwner {
        /// @solidity memory-safe-assembly
        assembly {
            if iszero(shl(96, newOwner)) {
                mstore(0x00, 0x7448fbae) // `NewOwnerIsZeroAddress()`.
                revert(0x1c, 0x04)
            }
        }
        _setOwner(newOwner);
    }

    /// @dev Allows the owner to renounce their ownership.
    function renounceOwnership() public payable virtual onlyOwner {
        _setOwner(address(0));
    }

    /// @dev Request a two-step ownership handover to the caller.
    /// The request will automatically expire in 48 hours (172800 seconds) by default.
    function requestOwnershipHandover() public payable virtual {
        unchecked {
            uint256 expires = block.timestamp + _ownershipHandoverValidFor();
            /// @solidity memory-safe-assembly
            assembly {
                // Compute and set the handover slot to `expires`.
                mstore(0x0c, _HANDOVER_SLOT_SEED)
                mstore(0x00, caller())
                sstore(keccak256(0x0c, 0x20), expires)
                // Emit the {OwnershipHandoverRequested} event.
                log2(0, 0, _OWNERSHIP_HANDOVER_REQUESTED_EVENT_SIGNATURE, caller())
            }
        }
    }

    /// @dev Cancels the two-step ownership handover to the caller, if any.
    function cancelOwnershipHandover() public payable virtual {
        /// @solidity memory-safe-assembly
        assembly {
            // Compute and set the handover slot to 0.
            mstore(0x0c, _HANDOVER_SLOT_SEED)
            mstore(0x00, caller())
            sstore(keccak256(0x0c, 0x20), 0)
            // Emit the {OwnershipHandoverCanceled} event.
            log2(0, 0, _OWNERSHIP_HANDOVER_CANCELED_EVENT_SIGNATURE, caller())
        }
    }

    /// @dev Allows the owner to complete the two-step ownership handover to `pendingOwner`.
    /// Reverts if there is no existing ownership handover requested by `pendingOwner`.
    function completeOwnershipHandover(address pendingOwner) public payable virtual onlyOwner {
        /// @solidity memory-safe-assembly
        assembly {
            // Compute and set the handover slot to 0.
            mstore(0x0c, _HANDOVER_SLOT_SEED)
            mstore(0x00, pendingOwner)
            let handoverSlot := keccak256(0x0c, 0x20)
            // If the handover does not exist, or has expired.
            if gt(timestamp(), sload(handoverSlot)) {
                mstore(0x00, 0x6f5e8818) // `NoHandoverRequest()`.
                revert(0x1c, 0x04)
            }
            // Set the handover slot to 0.
            sstore(handoverSlot, 0)
        }
        _setOwner(pendingOwner);
    }

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                   PUBLIC READ FUNCTIONS                    */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Returns the owner of the contract.
    function owner() public view virtual returns (address result) {
        /// @solidity memory-safe-assembly
        assembly {
            result := sload(_OWNER_SLOT)
        }
    }

    /// @dev Returns the expiry timestamp for the two-step ownership handover to `pendingOwner`.
    function ownershipHandoverExpiresAt(address pendingOwner)
        public
        view
        virtual
        returns (uint256 result)
    {
        /// @solidity memory-safe-assembly
        assembly {
            // Compute the handover slot.
            mstore(0x0c, _HANDOVER_SLOT_SEED)
            mstore(0x00, pendingOwner)
            // Load the handover slot.
            result := sload(keccak256(0x0c, 0x20))
        }
    }

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                         MODIFIERS                          */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Marks a function as only callable by the owner.
    modifier onlyOwner() virtual {
        _checkOwner();
        _;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import {CallContextChecker} from "./CallContextChecker.sol";

/// @notice UUPS proxy mixin.
/// @author Solady (https://github.com/vectorized/solady/blob/main/src/utils/UUPSUpgradeable.sol)
/// @author Modified from OpenZeppelin
/// (https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/proxy/utils/UUPSUpgradeable.sol)
///
/// @dev Note:
/// - This implementation is intended to be used with ERC1967 proxies.
/// See: `LibClone.deployERC1967` and related functions.
/// - This implementation is NOT compatible with legacy OpenZeppelin proxies
/// which do not store the implementation at `_ERC1967_IMPLEMENTATION_SLOT`.
abstract contract UUPSUpgradeable is CallContextChecker {
    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                       CUSTOM ERRORS                        */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev The upgrade failed.
    error UpgradeFailed();

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                           EVENTS                           */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Emitted when the proxy's implementation is upgraded.
    event Upgraded(address indexed implementation);

    /// @dev `keccak256(bytes("Upgraded(address)"))`.
    uint256 private constant _UPGRADED_EVENT_SIGNATURE =
        0xbc7cd75a20ee27fd9adebab32041f755214dbc6bffa90cc0225b39da2e5c2d3b;

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                          STORAGE                           */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev The ERC-1967 storage slot for the implementation in the proxy.
    /// `uint256(keccak256("eip1967.proxy.implementation")) - 1`.
    bytes32 internal constant _ERC1967_IMPLEMENTATION_SLOT =
        0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                      UUPS OPERATIONS                       */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Please override this function to check if `msg.sender` is authorized
    /// to upgrade the proxy to `newImplementation`, reverting if not.
    /// ```
    ///     function _authorizeUpgrade(address) internal override onlyOwner {}
    /// ```
    function _authorizeUpgrade(address newImplementation) internal virtual;

    /// @dev Returns the storage slot used by the implementation,
    /// as specified in [ERC1822](https://eips.ethereum.org/EIPS/eip-1822).
    ///
    /// Note: The `notDelegated` modifier prevents accidental upgrades to
    /// an implementation that is a proxy contract.
    function proxiableUUID() public view virtual notDelegated returns (bytes32) {
        // This function must always return `_ERC1967_IMPLEMENTATION_SLOT` to comply with ERC1967.
        return _ERC1967_IMPLEMENTATION_SLOT;
    }

    /// @dev Upgrades the proxy's implementation to `newImplementation`.
    /// Emits a {Upgraded} event.
    ///
    /// Note: Passing in empty `data` skips the delegatecall to `newImplementation`.
    function upgradeToAndCall(address newImplementation, bytes calldata data)
        public
        payable
        virtual
        onlyProxy
    {
        _authorizeUpgrade(newImplementation);
        /// @solidity memory-safe-assembly
        assembly {
            newImplementation := shr(96, shl(96, newImplementation)) // Clears upper 96 bits.
            mstore(0x00, returndatasize())
            mstore(0x01, 0x52d1902d) // `proxiableUUID()`.
            let s := _ERC1967_IMPLEMENTATION_SLOT
            // Check if `newImplementation` implements `proxiableUUID` correctly.
            if iszero(eq(mload(staticcall(gas(), newImplementation, 0x1d, 0x04, 0x01, 0x20)), s)) {
                mstore(0x01, 0x55299b49) // `UpgradeFailed()`.
                revert(0x1d, 0x04)
            }
            // Emit the {Upgraded} event.
            log2(codesize(), 0x00, _UPGRADED_EVENT_SIGNATURE, newImplementation)
            sstore(s, newImplementation) // Updates the implementation.

            // Perform a delegatecall to `newImplementation` if `data` is non-empty.
            if data.length {
                // Forwards the `data` to `newImplementation` via delegatecall.
                let m := mload(0x40)
                calldatacopy(m, data.offset, data.length)
                if iszero(
                    delegatecall(gas(), newImplementation, m, data.length, codesize(), 0x00)
                ) {
                    // Bubble up the revert if the call reverts.
                    returndatacopy(m, 0x00, returndatasize())
                    revert(m, returndatasize())
                }
            }
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

/// @notice Initializable mixin for the upgradeable contracts.
/// @author Solady (https://github.com/vectorized/solady/blob/main/src/utils/Initializable.sol)
/// @author Modified from OpenZeppelin (https://github.com/OpenZeppelin/openzeppelin-contracts/tree/master/contracts/proxy/utils/Initializable.sol)
abstract contract Initializable {
    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                       CUSTOM ERRORS                        */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev The contract is already initialized.
    error InvalidInitialization();

    /// @dev The contract is not initializing.
    error NotInitializing();

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                           EVENTS                           */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Triggered when the contract has been initialized.
    event Initialized(uint64 version);

    /// @dev `keccak256(bytes("Initialized(uint64)"))`.
    bytes32 private constant _INITIALIZED_EVENT_SIGNATURE =
        0xc7f505b2f371ae2175ee4913f4499e1f2633a7b5936321eed1cdaeb6115181d2;

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                          STORAGE                           */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev The default initializable slot is given by:
    /// `bytes32(~uint256(uint32(bytes4(keccak256("_INITIALIZABLE_SLOT")))))`.
    ///
    /// Bits Layout:
    /// - [0]     `initializing`
    /// - [1..64] `initializedVersion`
    bytes32 private constant _INITIALIZABLE_SLOT =
        0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffbf601132;

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                        CONSTRUCTOR                         */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    constructor() {
        // Construction time check to ensure that `_initializableSlot()` is not
        // overridden to zero. Will be optimized away if there is no revert.
        require(_initializableSlot() != bytes32(0));
    }

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                         OPERATIONS                         */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Override to return a non-zero custom storage slot if required.
    function _initializableSlot() internal pure virtual returns (bytes32) {
        return _INITIALIZABLE_SLOT;
    }

    /// @dev Guards an initializer function so that it can be invoked at most once.
    ///
    /// You can guard a function with `onlyInitializing` such that it can be called
    /// through a function guarded with `initializer`.
    ///
    /// This is similar to `reinitializer(1)`, except that in the context of a constructor,
    /// an `initializer` guarded function can be invoked multiple times.
    /// This can be useful during testing and is not expected to be used in production.
    ///
    /// Emits an {Initialized} event.
    modifier initializer() virtual {
        bytes32 s = _initializableSlot();
        /// @solidity memory-safe-assembly
        assembly {
            let i := sload(s)
            // Set `initializing` to 1, `initializedVersion` to 1.
            sstore(s, 3)
            // If `!(initializing == 0 && initializedVersion == 0)`.
            if i {
                // If `!(address(this).code.length == 0 && initializedVersion == 1)`.
                if iszero(lt(extcodesize(address()), eq(shr(1, i), 1))) {
                    mstore(0x00, 0xf92ee8a9) // `InvalidInitialization()`.
                    revert(0x1c, 0x04)
                }
                s := shl(shl(255, i), s) // Skip initializing if `initializing == 1`.
            }
        }
        _;
        /// @solidity memory-safe-assembly
        assembly {
            if s {
                // Set `initializing` to 0, `initializedVersion` to 1.
                sstore(s, 2)
                // Emit the {Initialized} event.
                mstore(0x20, 1)
                log1(0x20, 0x20, _INITIALIZED_EVENT_SIGNATURE)
            }
        }
    }

    /// @dev Guards a reinitializer function so that it can be invoked at most once.
    ///
    /// You can guard a function with `onlyInitializing` such that it can be called
    /// through a function guarded with `reinitializer`.
    ///
    /// Emits an {Initialized} event.
    modifier reinitializer(uint64 version) virtual {
        bytes32 s = _initializableSlot();
        /// @solidity memory-safe-assembly
        assembly {
            // Clean upper bits, and shift left by 1 to make space for the initializing bit.
            version := shl(1, and(version, 0xffffffffffffffff))
            let i := sload(s)
            // If `initializing == 1 || initializedVersion >= version`.
            if iszero(lt(and(i, 1), lt(i, version))) {
                mstore(0x00, 0xf92ee8a9) // `InvalidInitialization()`.
                revert(0x1c, 0x04)
            }
            // Set `initializing` to 1, `initializedVersion` to `version`.
            sstore(s, or(1, version))
        }
        _;
        /// @solidity memory-safe-assembly
        assembly {
            // Set `initializing` to 0, `initializedVersion` to `version`.
            sstore(s, version)
            // Emit the {Initialized} event.
            mstore(0x20, shr(1, version))
            log1(0x20, 0x20, _INITIALIZED_EVENT_SIGNATURE)
        }
    }

    /// @dev Guards a function such that it can only be called in the scope
    /// of a function guarded with `initializer` or `reinitializer`.
    modifier onlyInitializing() virtual {
        _checkInitializing();
        _;
    }

    /// @dev Reverts if the contract is not initializing.
    function _checkInitializing() internal view virtual {
        bytes32 s = _initializableSlot();
        /// @solidity memory-safe-assembly
        assembly {
            if iszero(and(1, sload(s))) {
                mstore(0x00, 0xd7e6bcf8) // `NotInitializing()`.
                revert(0x1c, 0x04)
            }
        }
    }

    /// @dev Locks any future initializations by setting the initialized version to `2**64 - 1`.
    ///
    /// Calling this in the constructor will prevent the contract from being initialized
    /// or reinitialized. It is recommended to use this to lock implementation contracts
    /// that are designed to be called through proxies.
    ///
    /// Emits an {Initialized} event the first time it is successfully called.
    function _disableInitializers() internal virtual {
        bytes32 s = _initializableSlot();
        /// @solidity memory-safe-assembly
        assembly {
            let i := sload(s)
            if and(i, 1) {
                mstore(0x00, 0xf92ee8a9) // `InvalidInitialization()`.
                revert(0x1c, 0x04)
            }
            let uint64max := 0xffffffffffffffff
            if iszero(eq(shr(1, i), uint64max)) {
                // Set `initializing` to 0, `initializedVersion` to `2**64 - 1`.
                sstore(s, shl(1, uint64max))
                // Emit the {Initialized} event.
                mstore(0x20, uint64max)
                log1(0x20, 0x20, _INITIALIZED_EVENT_SIGNATURE)
            }
        }
    }

    /// @dev Returns the highest version that has been initialized.
    function _getInitializedVersion() internal view virtual returns (uint64 version) {
        bytes32 s = _initializableSlot();
        /// @solidity memory-safe-assembly
        assembly {
            version := shr(1, sload(s))
        }
    }

    /// @dev Returns whether the contract is currently initializing.
    function _isInitializing() internal view virtual returns (bool result) {
        bytes32 s = _initializableSlot();
        /// @solidity memory-safe-assembly
        assembly {
            result := and(1, sload(s))
        }
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.8.26;

import {ERC721} from "solady/tokens/ERC721.sol";
import {Strings} from "openzeppelin-contracts/contracts/utils/Strings.sol";
import {ECDSA} from "openzeppelin-contracts/contracts/utils/cryptography/ECDSA.sol";
import {MessageHashUtils} from "openzeppelin-contracts/contracts/utils/cryptography/MessageHashUtils.sol";
import {Ownable} from "openzeppelin-contracts/contracts/access/Ownable.sol";
import {SigUtils} from "./utils/SigUtils.sol";

error MaxSupply();
error NonExistentTokenURI();
error InvalidSignature();
error MintLimitReached();
error InvalidSignerAddress();
error InvalidTotalSupply();

contract BadgerBoxes is ERC721, Ownable {
    using Strings for uint256;
    using ECDSA for bytes32;
    using MessageHashUtils for bytes32;

    address public signerAddress = address(0);
    SigUtils public sigUtils;

    string private _name;
    string private _symbol;
    string public baseURI;
    string public preRevealURI;

    uint256 public currentTokenId;
    uint256 public totalSupply = 600;

    bool public revealed = false;

    mapping(address => bool) public hasMinted;
    mapping(address => uint256) public nonces;

    constructor(string memory name_, string memory symbol_, string memory _preRevealUri, address _signerAddress)
        Ownable(msg.sender)
    {
        if (_signerAddress == address(0)) {
            revert InvalidSignerAddress();
        }
        _name = name_;
        _symbol = symbol_;
        preRevealURI = _preRevealUri;
        signerAddress = _signerAddress;
        sigUtils = new SigUtils(name_, "1", address(this));
    }

    function name() public view virtual override returns (string memory) {
        return _name;
    }

    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    function validateSignature(address recipient, uint256 nonce, bytes memory signature) public view returns (bool) {
        bytes32 digest = sigUtils.getTypedDataHash(recipient, nonce);
        address signer = digest.recover(signature);
        return signer == signerAddress;
    }

    function mintTo(address recipient, bytes memory signature) public returns (uint256) {
        if (hasMinted[recipient]) {
            revert MintLimitReached();
        }

        uint256 nonce = nonces[recipient];
        if (!validateSignature(recipient, nonce, signature)) {
            revert InvalidSignature();
        }

        uint256 newTokenId = currentTokenId + 1;

        if (newTokenId > totalSupply) {
            revert MaxSupply();
        }

        hasMinted[recipient] = true;
        nonces[recipient] = nonce + 1;
        currentTokenId = newTokenId;

        _safeMint(recipient, newTokenId);
        return newTokenId;
    }

    function setTotalSupply(uint256 _totalSupply) external onlyOwner {
        if (_totalSupply < currentTokenId) {
            revert InvalidTotalSupply();
        }
        totalSupply = _totalSupply;
    }

    function setPreRevealURI(string calldata _preRevealUri) external onlyOwner {
        preRevealURI = _preRevealUri;
    }

    function setBaseURI(string calldata _baseUri) external onlyOwner {
        baseURI = _baseUri;
    }

    function setSignerAddress(address _signerAddress) external onlyOwner {
        if (_signerAddress == address(0)) {
            revert InvalidSignerAddress();
        }
        signerAddress = _signerAddress;
    }

    function reveal() external onlyOwner {
        revealed = true;
    }

    function setName(string calldata name_) external onlyOwner {
        _name = name_;
        // Update SigUtils with the new name to maintain signature validation
        // WARNING: This will invalidate all existing signatures created with the old name
        sigUtils.setName(name_);
    }

    function setSymbol(string calldata symbol_) external onlyOwner {
        _symbol = symbol_;
    }

    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        if (_ownerOf(tokenId) == address(0)) {
            revert NonExistentTokenURI();
        }
        if (!revealed) {
            return preRevealURI;
        }
        return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.8.26;

import {ERC721} from "solady/tokens/ERC721.sol";
import {Ownable} from "solady/auth/Ownable.sol";
import {UUPSUpgradeable} from "solady/utils/UUPSUpgradeable.sol";
import {Initializable} from "solady/utils/Initializable.sol";
import {Strings} from "openzeppelin-contracts/contracts/utils/Strings.sol";
import {ECDSA} from "openzeppelin-contracts/contracts/utils/cryptography/ECDSA.sol";
import {MessageHashUtils} from "openzeppelin-contracts/contracts/utils/cryptography/MessageHashUtils.sol";
import {SigUtils} from "./utils/SigUtils.sol";

error NonExistentTokenURI();
error InvalidSignature();
error InvalidSignerAddress();
error InvalidTotalSupply();
error TokenIdAlreadyMinted();
error NotOwnerNorApproved();
error UnauthorizedMinter();

/// @title MoneyBadgers
/// @notice Upgradable ERC721 NFT contract for MoneyBadgers
/// @notice Similar to BadgerBoxes but without mint limit per address
contract MoneyBadgers is ERC721, Ownable, UUPSUpgradeable, Initializable {
    using Strings for uint256;
    using ECDSA for bytes32;
    using MessageHashUtils for bytes32;

    address public signerAddress = address(0);
    SigUtils public sigUtils;

    string private _name;
    string private _symbol;
    string public baseURI;
    string public preRevealURI;

    uint256 public totalSupply = type(uint256).max; // No max supply by default
    uint256 public totalMinted; // Total number of tokens minted (independent of token IDs)

    bool public revealed = false;

    mapping(address => uint256) public nonces;
    mapping(uint256 => bool) public tokenIdMinted; // Track minted token IDs
    mapping(address => bool) public authorizedMinters; // Authorized minter contracts

    /// @custom:oz-upgrades-unsafe-allow constructor
    constructor() {
        _disableInitializers();
    }

    /// @notice Initialize the MoneyBadgers contract
    /// @param name_ The name of the NFT collection
    /// @param symbol_ The symbol of the NFT collection
    /// @param _preRevealUri The pre-reveal URI for tokens
    /// @param _signerAddress The address that signs minting signatures
    /// @param _owner The owner of the contract
    function initialize(
        string memory name_,
        string memory symbol_,
        string memory _preRevealUri,
        address _signerAddress,
        address _owner
    ) public {
        if (_signerAddress == address(0)) {
            revert InvalidSignerAddress();
        }
        _initializeOwner(_owner);
        _name = name_;
        _symbol = symbol_;
        preRevealURI = _preRevealUri;
        signerAddress = _signerAddress;
        sigUtils = new SigUtils(name_, "1", address(this));
    }

    function name() public view virtual override returns (string memory) {
        return _name;
    }

    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    function validateSignature(address recipient, uint256 nonce, bytes memory signature) public view returns (bool) {
        bytes32 digest = sigUtils.getTypedDataHash(recipient, nonce);
        address signer = digest.recover(signature);
        return signer == signerAddress;
    }

    /// @notice Mint a new token to a recipient with signature validation
    /// @param recipient The address to mint the token to
    /// @param signature The signature for minting authorization
    /// @return The minted token ID
    /// @dev Mints with tokenId = totalMinted + 1 (sequential minting)
    function mintTo(address recipient, bytes memory signature) public returns (uint256) {
        uint256 nonce = nonces[recipient];
        if (!validateSignature(recipient, nonce, signature)) {
            revert InvalidSignature();
        }

        uint256 newTokenId = totalMinted + 1;

        // Check totalSupply only if it's not max (unlimited)
        if (totalSupply != type(uint256).max && newTokenId > totalSupply) {
            revert InvalidTotalSupply();
        }

        // Check if this tokenId was already minted (shouldn't happen with sequential, but safety check)
        if (tokenIdMinted[newTokenId]) {
            revert TokenIdAlreadyMinted();
        }

        tokenIdMinted[newTokenId] = true;
        nonces[recipient] = nonce + 1;
        totalMinted++;

        _safeMint(recipient, newTokenId);
        return newTokenId;
    }

    /// @notice Mint a specific token ID to a recipient (for MoneyBadgersMinter)
    /// @param recipient The address to mint the token to
    /// @param tokenId The specific token ID to mint
    /// @param signature The signature for minting authorization
    function mintToWithTokenId(address recipient, uint256 tokenId, bytes memory signature) public returns (uint256) {
        if (tokenIdMinted[tokenId]) {
            revert TokenIdAlreadyMinted();
        }

        uint256 nonce = nonces[recipient];
        if (!validateSignature(recipient, nonce, signature)) {
            revert InvalidSignature();
        }

        // Check totalSupply only if it's not max (unlimited)
        if (totalSupply != type(uint256).max && tokenId > totalSupply) {
            revert InvalidTotalSupply();
        }

        tokenIdMinted[tokenId] = true;
        nonces[recipient] = nonce + 1;
        totalMinted++;

        _safeMint(recipient, tokenId);
        return tokenId;
    }

    /// @notice Mint a specific token ID without signature (only callable by authorized minter contracts)
    /// @param recipient The address to mint the token to
    /// @param tokenId The specific token ID to mint
    /// @dev This function bypasses signature validation for trusted minter contracts
    function mintByMinter(address recipient, uint256 tokenId) external returns (uint256) {
        if (!authorizedMinters[msg.sender]) {
            revert UnauthorizedMinter();
        }

        if (tokenIdMinted[tokenId]) {
            revert TokenIdAlreadyMinted();
        }

        // Check totalSupply only if it's not max (unlimited)
        if (totalSupply != type(uint256).max && tokenId > totalSupply) {
            revert InvalidTotalSupply();
        }

        tokenIdMinted[tokenId] = true;
        totalMinted++;

        _safeMint(recipient, tokenId);
        return tokenId;
    }

    /// @notice Authorize or revoke a minter contract
    /// @param minter The address of the minter contract
    /// @param authorized Whether to authorize or revoke
    function setAuthorizedMinter(address minter, bool authorized) external onlyOwner {
        authorizedMinters[minter] = authorized;
    }

    function setTotalSupply(uint256 _totalSupply) external onlyOwner {
        if (_totalSupply < totalMinted) {
            revert InvalidTotalSupply();
        }
        totalSupply = _totalSupply;
    }

    function setPreRevealURI(string calldata _preRevealUri) external onlyOwner {
        preRevealURI = _preRevealUri;
    }

    function setBaseURI(string calldata _baseUri) external onlyOwner {
        baseURI = _baseUri;
    }

    function setSignerAddress(address _signerAddress) external onlyOwner {
        if (_signerAddress == address(0)) {
            revert InvalidSignerAddress();
        }
        signerAddress = _signerAddress;
    }

    function reveal() external onlyOwner {
        revealed = true;
    }

    function setName(string calldata name_) external onlyOwner {
        _name = name_;
        // Update SigUtils with the new name to maintain signature validation
        // WARNING: This will invalidate all existing signatures created with the old name
        sigUtils.setName(name_);
    }

    function setSymbol(string calldata symbol_) external onlyOwner {
        _symbol = symbol_;
    }

    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        if (_ownerOf(tokenId) == address(0)) {
            revert NonExistentTokenURI();
        }
        if (!revealed) {
            return preRevealURI;
        }
        return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
    }

    /// @notice Burn a token (only owner or approved address)
    /// @param tokenId The token ID to burn
    /// @dev Note: Burning does not reduce totalMinted count (tracks total ever minted, not current supply)
    function burn(uint256 tokenId) external {
        address owner = ownerOf(tokenId);
        if (owner != msg.sender && !isApprovedForAll(owner, msg.sender) && getApproved(tokenId) != msg.sender) {
            revert NotOwnerNorApproved();
        }
        _burn(tokenId);
    }

    /// @notice Authorize upgrade (UUPS)
    function _authorizeUpgrade(address) internal override onlyOwner {}
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

/// @notice Call context checker mixin.
/// @author Solady (https://github.com/vectorized/solady/blob/main/src/utils/CallContextChecker.sol)
contract CallContextChecker {
    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                       CUSTOM ERRORS                        */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev The call is from an unauthorized call context.
    error UnauthorizedCallContext();

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                         IMMUTABLES                         */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev For checking if the context is a delegate call.
    ///
    /// Note: To enable use cases with an immutable default implementation in the bytecode,
    /// (see: ERC6551Proxy), we don't require that the proxy address must match the
    /// value stored in the implementation slot, which may not be initialized.
    uint256 private immutable __self = uint256(uint160(address(this)));

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                    CALL CONTEXT CHECKS                     */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    // A proxy call can be either via a `delegatecall` to an implementation,
    // or a 7702 call on an authority that points to a delegation.

    /// @dev Returns whether the current call context is on a EIP7702 authority
    /// (i.e. externally owned account).
    function _onEIP7702Authority() internal view virtual returns (bool result) {
        /// @solidity memory-safe-assembly
        assembly {
            extcodecopy(address(), 0x00, 0x00, 0x20)
            // Note: Checking that it starts with hex"ef01" is the most general and futureproof.
            // 7702 bytecode is `abi.encodePacked(hex"ef01", uint8(version), address(delegation))`.
            result := eq(0xef01, shr(240, mload(0x00)))
        }
    }

    /// @dev Returns the implementation of this contract.
    function _selfImplementation() internal view virtual returns (address) {
        return address(uint160(__self));
    }

    /// @dev Returns whether the current call context is on the implementation itself.
    function _onImplementation() internal view virtual returns (bool) {
        return __self == uint160(address(this));
    }

    /// @dev Requires that the current call context is performed via a EIP7702 authority.
    function _checkOnlyEIP7702Authority() internal view virtual {
        if (!_onEIP7702Authority()) _revertUnauthorizedCallContext();
    }

    /// @dev Requires that the current call context is performed via a proxy.
    function _checkOnlyProxy() internal view virtual {
        if (_onImplementation()) _revertUnauthorizedCallContext();
    }

    /// @dev Requires that the current call context is NOT performed via a proxy.
    /// This is the opposite of `checkOnlyProxy`.
    function _checkNotDelegated() internal view virtual {
        if (!_onImplementation()) _revertUnauthorizedCallContext();
    }

    /// @dev Requires that the current call context is performed via a EIP7702 authority.
    modifier onlyEIP7702Authority() virtual {
        _checkOnlyEIP7702Authority();
        _;
    }

    /// @dev Requires that the current call context is performed via a proxy.
    modifier onlyProxy() virtual {
        _checkOnlyProxy();
        _;
    }

    /// @dev Requires that the current call context is NOT performed via a proxy.
    /// This is the opposite of `onlyProxy`.
    modifier notDelegated() virtual {
        _checkNotDelegated();
        _;
    }

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                      PRIVATE HELPERS                       */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    function _revertUnauthorizedCallContext() private pure {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, 0x9f03a026) // `UnauthorizedCallContext()`.
            revert(0x1c, 0x04)
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

/// @notice Simple ERC721 implementation with storage hitchhiking.
/// @author Solady (https://github.com/vectorized/solady/blob/main/src/tokens/ERC721.sol)
/// @author Modified from Solmate (https://github.com/transmissions11/solmate/blob/main/src/tokens/ERC721.sol)
/// @author Modified from OpenZeppelin (https://github.com/OpenZeppelin/openzeppelin-contracts/tree/master/contracts/token/ERC721/ERC721.sol)
///
/// @dev Note:
/// - The ERC721 standard allows for self-approvals.
///   For performance, this implementation WILL NOT revert for such actions.
///   Please add any checks with overrides if desired.
/// - For performance, methods are made payable where permitted by the ERC721 standard.
/// - The `safeTransfer` functions use the identity precompile (0x4)
///   to copy memory internally.
///
/// If you are overriding:
/// - NEVER violate the ERC721 invariant:
///   the balance of an owner MUST always be equal to their number of ownership slots.
///   The transfer functions do not have an underflow guard for user token balances.
/// - Make sure all variables written to storage are properly cleaned
///   (e.g. the bool value for `isApprovedForAll` MUST be either 1 or 0 under the hood).
/// - Check that the overridden function is actually used in the function you want to
///   change the behavior of. Much of the code has been manually inlined for performance.
abstract contract ERC721 {
    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                         CONSTANTS                          */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev An account can hold up to 4294967295 tokens.
    uint256 internal constant _MAX_ACCOUNT_BALANCE = 0xffffffff;

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                       CUSTOM ERRORS                        */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Only the token owner or an approved account can manage the token.
    error NotOwnerNorApproved();

    /// @dev The token does not exist.
    error TokenDoesNotExist();

    /// @dev The token already exists.
    error TokenAlreadyExists();

    /// @dev Cannot query the balance for the zero address.
    error BalanceQueryForZeroAddress();

    /// @dev Cannot mint or transfer to the zero address.
    error TransferToZeroAddress();

    /// @dev The token must be owned by `from`.
    error TransferFromIncorrectOwner();

    /// @dev The recipient's balance has overflowed.
    error AccountBalanceOverflow();

    /// @dev Cannot safely transfer to a contract that does not implement
    /// the ERC721Receiver interface.
    error TransferToNonERC721ReceiverImplementer();

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                           EVENTS                           */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Emitted when token `id` is transferred from `from` to `to`.
    event Transfer(address indexed from, address indexed to, uint256 indexed id);

    /// @dev Emitted when `owner` enables `account` to manage the `id` token.
    event Approval(address indexed owner, address indexed account, uint256 indexed id);

    /// @dev Emitted when `owner` enables or disables `operator` to manage all of their tokens.
    event ApprovalForAll(address indexed owner, address indexed operator, bool isApproved);

    /// @dev `keccak256(bytes("Transfer(address,address,uint256)"))`.
    uint256 private constant _TRANSFER_EVENT_SIGNATURE =
        0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef;

    /// @dev `keccak256(bytes("Approval(address,address,uint256)"))`.
    uint256 private constant _APPROVAL_EVENT_SIGNATURE =
        0x8c5be1e5ebec7d5bd14f71427d1e84f3dd0314c0f7b2291e5b200ac8c7c3b925;

    /// @dev `keccak256(bytes("ApprovalForAll(address,address,bool)"))`.
    uint256 private constant _APPROVAL_FOR_ALL_EVENT_SIGNATURE =
        0x17307eab39ab6107e8899845ad3d59bd9653f200f220920489ca2b5937696c31;

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                          STORAGE                           */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev The ownership data slot of `id` is given by:
    /// ```
    ///     mstore(0x00, id)
    ///     mstore(0x1c, _ERC721_MASTER_SLOT_SEED)
    ///     let ownershipSlot := add(id, add(id, keccak256(0x00, 0x20)))
    /// ```
    /// Bits Layout:
    /// - [0..159]   `addr`
    /// - [160..255] `extraData`
    ///
    /// The approved address slot is given by: `add(1, ownershipSlot)`.
    ///
    /// See: https://notes.ethereum.org/%40vbuterin/verkle_tree_eip
    ///
    /// The balance slot of `owner` is given by:
    /// ```
    ///     mstore(0x1c, _ERC721_MASTER_SLOT_SEED)
    ///     mstore(0x00, owner)
    ///     let balanceSlot := keccak256(0x0c, 0x1c)
    /// ```
    /// Bits Layout:
    /// - [0..31]   `balance`
    /// - [32..255] `aux`
    ///
    /// The `operator` approval slot of `owner` is given by:
    /// ```
    ///     mstore(0x1c, or(_ERC721_MASTER_SLOT_SEED, operator))
    ///     mstore(0x00, owner)
    ///     let operatorApprovalSlot := keccak256(0x0c, 0x30)
    /// ```
    uint256 private constant _ERC721_MASTER_SLOT_SEED = 0x7d8825530a5a2e7a << 192;

    /// @dev Pre-shifted and pre-masked constant.
    uint256 private constant _ERC721_MASTER_SLOT_SEED_MASKED = 0x0a5a2e7a00000000;

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                      ERC721 METADATA                       */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Returns the token collection name.
    function name() public view virtual returns (string memory);

    /// @dev Returns the token collection symbol.
    function symbol() public view virtual returns (string memory);

    /// @dev Returns the Uniform Resource Identifier (URI) for token `id`.
    function tokenURI(uint256 id) public view virtual returns (string memory);

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                           ERC721                           */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Returns the owner of token `id`.
    ///
    /// Requirements:
    /// - Token `id` must exist.
    function ownerOf(uint256 id) public view virtual returns (address result) {
        result = _ownerOf(id);
        /// @solidity memory-safe-assembly
        assembly {
            if iszero(result) {
                mstore(0x00, 0xceea21b6) // `TokenDoesNotExist()`.
                revert(0x1c, 0x04)
            }
        }
    }

    /// @dev Returns the number of tokens owned by `owner`.
    ///
    /// Requirements:
    /// - `owner` must not be the zero address.
    function balanceOf(address owner) public view virtual returns (uint256 result) {
        /// @solidity memory-safe-assembly
        assembly {
            // Revert if the `owner` is the zero address.
            if iszero(owner) {
                mstore(0x00, 0x8f4eb604) // `BalanceQueryForZeroAddress()`.
                revert(0x1c, 0x04)
            }
            mstore(0x1c, _ERC721_MASTER_SLOT_SEED)
            mstore(0x00, owner)
            result := and(sload(keccak256(0x0c, 0x1c)), _MAX_ACCOUNT_BALANCE)
        }
    }

    /// @dev Returns the account approved to manage token `id`.
    ///
    /// Requirements:
    /// - Token `id` must exist.
    function getApproved(uint256 id) public view virtual returns (address result) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, id)
            mstore(0x1c, _ERC721_MASTER_SLOT_SEED)
            let ownershipSlot := add(id, add(id, keccak256(0x00, 0x20)))
            if iszero(shl(96, sload(ownershipSlot))) {
                mstore(0x00, 0xceea21b6) // `TokenDoesNotExist()`.
                revert(0x1c, 0x04)
            }
            result := sload(add(1, ownershipSlot))
        }
    }

    /// @dev Sets `account` as the approved account to manage token `id`.
    ///
    /// Requirements:
    /// - Token `id` must exist.
    /// - The caller must be the owner of the token,
    ///   or an approved operator for the token owner.
    ///
    /// Emits an {Approval} event.
    function approve(address account, uint256 id) public payable virtual {
        _approve(msg.sender, account, id);
    }

    /// @dev Returns whether `operator` is approved to manage the tokens of `owner`.
    function isApprovedForAll(address owner, address operator)
        public
        view
        virtual
        returns (bool result)
    {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x1c, operator)
            mstore(0x08, _ERC721_MASTER_SLOT_SEED_MASKED)
            mstore(0x00, owner)
            result := sload(keccak256(0x0c, 0x30))
        }
    }

    /// @dev Sets whether `operator` is approved to manage the tokens of the caller.
    ///
    /// Emits an {ApprovalForAll} event.
    function setApprovalForAll(address operator, bool isApproved) public virtual {
        /// @solidity memory-safe-assembly
        assembly {
            // Convert to 0 or 1.
            isApproved := iszero(iszero(isApproved))
            // Update the `isApproved` for (`msg.sender`, `operator`).
            mstore(0x1c, operator)
            mstore(0x08, _ERC721_MASTER_SLOT_SEED_MASKED)
            mstore(0x00, caller())
            sstore(keccak256(0x0c, 0x30), isApproved)
            // Emit the {ApprovalForAll} event.
            mstore(0x00, isApproved)
            // forgefmt: disable-next-item
            log3(0x00, 0x20, _APPROVAL_FOR_ALL_EVENT_SIGNATURE, caller(), shr(96, shl(96, operator)))
        }
    }

    /// @dev Transfers token `id` from `from` to `to`.
    ///
    /// Requirements:
    ///
    /// - Token `id` must exist.
    /// - `from` must be the owner of the token.
    /// - `to` cannot be the zero address.
    /// - The caller must be the owner of the token, or be approved to manage the token.
    ///
    /// Emits a {Transfer} event.
    function transferFrom(address from, address to, uint256 id) public payable virtual {
        _beforeTokenTransfer(from, to, id);
        /// @solidity memory-safe-assembly
        assembly {
            // Clear the upper 96 bits.
            let bitmaskAddress := shr(96, not(0))
            from := and(bitmaskAddress, from)
            to := and(bitmaskAddress, to)
            // Load the ownership data.
            mstore(0x00, id)
            mstore(0x1c, or(_ERC721_MASTER_SLOT_SEED, caller()))
            let ownershipSlot := add(id, add(id, keccak256(0x00, 0x20)))
            let ownershipPacked := sload(ownershipSlot)
            let owner := and(bitmaskAddress, ownershipPacked)
            // Revert if the token does not exist, or if `from` is not the owner.
            if iszero(mul(owner, eq(owner, from))) {
                // `TokenDoesNotExist()`, `TransferFromIncorrectOwner()`.
                mstore(shl(2, iszero(owner)), 0xceea21b6a1148100)
                revert(0x1c, 0x04)
            }
            // Load, check, and update the token approval.
            {
                mstore(0x00, from)
                let approvedAddress := sload(add(1, ownershipSlot))
                // Revert if the caller is not the owner, nor approved.
                if iszero(or(eq(caller(), from), eq(caller(), approvedAddress))) {
                    if iszero(sload(keccak256(0x0c, 0x30))) {
                        mstore(0x00, 0x4b6e7f18) // `NotOwnerNorApproved()`.
                        revert(0x1c, 0x04)
                    }
                }
                // Delete the approved address if any.
                if approvedAddress { sstore(add(1, ownershipSlot), 0) }
            }
            // Update with the new owner.
            sstore(ownershipSlot, xor(ownershipPacked, xor(from, to)))
            // Decrement the balance of `from`.
            {
                let fromBalanceSlot := keccak256(0x0c, 0x1c)
                sstore(fromBalanceSlot, sub(sload(fromBalanceSlot), 1))
            }
            // Increment the balance of `to`.
            {
                mstore(0x00, to)
                let toBalanceSlot := keccak256(0x0c, 0x1c)
                let toBalanceSlotPacked := add(sload(toBalanceSlot), 1)
                // Revert if `to` is the zero address, or if the account balance overflows.
                if iszero(mul(to, and(toBalanceSlotPacked, _MAX_ACCOUNT_BALANCE))) {
                    // `TransferToZeroAddress()`, `AccountBalanceOverflow()`.
                    mstore(shl(2, iszero(to)), 0xea553b3401336cea)
                    revert(0x1c, 0x04)
                }
                sstore(toBalanceSlot, toBalanceSlotPacked)
            }
            // Emit the {Transfer} event.
            log4(codesize(), 0x00, _TRANSFER_EVENT_SIGNATURE, from, to, id)
        }
        _afterTokenTransfer(from, to, id);
    }

    /// @dev Equivalent to `safeTransferFrom(from, to, id, "")`.
    function safeTransferFrom(address from, address to, uint256 id) public payable virtual {
        transferFrom(from, to, id);
        if (_hasCode(to)) _checkOnERC721Received(from, to, id, "");
    }

    /// @dev Transfers token `id` from `from` to `to`.
    ///
    /// Requirements:
    ///
    /// - Token `id` must exist.
    /// - `from` must be the owner of the token.
    /// - `to` cannot be the zero address.
    /// - The caller must be the owner of the token, or be approved to manage the token.
    /// - If `to` refers to a smart contract, it must implement
    ///   {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
    ///
    /// Emits a {Transfer} event.
    function safeTransferFrom(address from, address to, uint256 id, bytes calldata data)
        public
        payable
        virtual
    {
        transferFrom(from, to, id);
        if (_hasCode(to)) _checkOnERC721Received(from, to, id, data);
    }

    /// @dev Returns true if this contract implements the interface defined by `interfaceId`.
    /// See: https://eips.ethereum.org/EIPS/eip-165
    /// This function call must use less than 30000 gas.
    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool result) {
        /// @solidity memory-safe-assembly
        assembly {
            let s := shr(224, interfaceId)
            // ERC165: 0x01ffc9a7, ERC721: 0x80ac58cd, ERC721Metadata: 0x5b5e139f.
            result := or(or(eq(s, 0x01ffc9a7), eq(s, 0x80ac58cd)), eq(s, 0x5b5e139f))
        }
    }

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                  INTERNAL QUERY FUNCTIONS                  */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Returns if token `id` exists.
    function _exists(uint256 id) internal view virtual returns (bool result) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, id)
            mstore(0x1c, _ERC721_MASTER_SLOT_SEED)
            result := iszero(iszero(shl(96, sload(add(id, add(id, keccak256(0x00, 0x20)))))))
        }
    }

    /// @dev Returns the owner of token `id`.
    /// Returns the zero address instead of reverting if the token does not exist.
    function _ownerOf(uint256 id) internal view virtual returns (address result) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, id)
            mstore(0x1c, _ERC721_MASTER_SLOT_SEED)
            result := shr(96, shl(96, sload(add(id, add(id, keccak256(0x00, 0x20))))))
        }
    }

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*            INTERNAL DATA HITCHHIKING FUNCTIONS             */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    // For performance, no events are emitted for the hitchhiking setters.
    // Please emit your own events if required.

    /// @dev Returns the auxiliary data for `owner`.
    /// Minting, transferring, burning the tokens of `owner` will not change the auxiliary data.
    /// Auxiliary data can be set for any address, even if it does not have any tokens.
    function _getAux(address owner) internal view virtual returns (uint224 result) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x1c, _ERC721_MASTER_SLOT_SEED)
            mstore(0x00, owner)
            result := shr(32, sload(keccak256(0x0c, 0x1c)))
        }
    }

    /// @dev Set the auxiliary data for `owner` to `value`.
    /// Minting, transferring, burning the tokens of `owner` will not change the auxiliary data.
    /// Auxiliary data can be set for any address, even if it does not have any tokens.
    function _setAux(address owner, uint224 value) internal virtual {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x1c, _ERC721_MASTER_SLOT_SEED)
            mstore(0x00, owner)
            let balanceSlot := keccak256(0x0c, 0x1c)
            let packed := sload(balanceSlot)
            sstore(balanceSlot, xor(packed, shl(32, xor(value, shr(32, packed)))))
        }
    }

    /// @dev Returns the extra data for token `id`.
    /// Minting, transferring, burning a token will not change the extra data.
    /// The extra data can be set on a non-existent token.
    function _getExtraData(uint256 id) internal view virtual returns (uint96 result) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, id)
            mstore(0x1c, _ERC721_MASTER_SLOT_SEED)
            result := shr(160, sload(add(id, add(id, keccak256(0x00, 0x20)))))
        }
    }

    /// @dev Sets the extra data for token `id` to `value`.
    /// Minting, transferring, burning a token will not change the extra data.
    /// The extra data can be set on a non-existent token.
    function _setExtraData(uint256 id, uint96 value) internal virtual {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, id)
            mstore(0x1c, _ERC721_MASTER_SLOT_SEED)
            let ownershipSlot := add(id, add(id, keccak256(0x00, 0x20)))
            let packed := sload(ownershipSlot)
            sstore(ownershipSlot, xor(packed, shl(160, xor(value, shr(160, packed)))))
        }
    }

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                  INTERNAL MINT FUNCTIONS                   */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Mints token `id` to `to`.
    ///
    /// Requirements:
    ///
    /// - Token `id` must not exist.
    /// - `to` cannot be the zero address.
    ///
    /// Emits a {Transfer} event.
    function _mint(address to, uint256 id) internal virtual {
        _beforeTokenTransfer(address(0), to, id);
        /// @solidity memory-safe-assembly
        assembly {
            // Clear the upper 96 bits.
            to := shr(96, shl(96, to))
            // Load the ownership data.
            mstore(0x00, id)
            mstore(0x1c, _ERC721_MASTER_SLOT_SEED)
            let ownershipSlot := add(id, add(id, keccak256(0x00, 0x20)))
            let ownershipPacked := sload(ownershipSlot)
            // Revert if the token already exists.
            if shl(96, ownershipPacked) {
                mstore(0x00, 0xc991cbb1) // `TokenAlreadyExists()`.
                revert(0x1c, 0x04)
            }
            // Update with the owner.
            sstore(ownershipSlot, or(ownershipPacked, to))
            // Increment the balance of the owner.
            {
                mstore(0x00, to)
                let balanceSlot := keccak256(0x0c, 0x1c)
                let balanceSlotPacked := add(sload(balanceSlot), 1)
                // Revert if `to` is the zero address, or if the account balance overflows.
                if iszero(mul(to, and(balanceSlotPacked, _MAX_ACCOUNT_BALANCE))) {
                    // `TransferToZeroAddress()`, `AccountBalanceOverflow()`.
                    mstore(shl(2, iszero(to)), 0xea553b3401336cea)
                    revert(0x1c, 0x04)
                }
                sstore(balanceSlot, balanceSlotPacked)
            }
            // Emit the {Transfer} event.
            log4(codesize(), 0x00, _TRANSFER_EVENT_SIGNATURE, 0, to, id)
        }
        _afterTokenTransfer(address(0), to, id);
    }

    /// @dev Mints token `id` to `to`, and updates the extra data for token `id` to `value`.
    /// Does NOT check if token `id` already exists (assumes `id` is auto-incrementing).
    ///
    /// Requirements:
    ///
    /// - `to` cannot be the zero address.
    ///
    /// Emits a {Transfer} event.
    function _mintAndSetExtraDataUnchecked(address to, uint256 id, uint96 value) internal virtual {
        _beforeTokenTransfer(address(0), to, id);
        /// @solidity memory-safe-assembly
        assembly {
            // Clear the upper 96 bits.
            to := shr(96, shl(96, to))
            // Update with the owner and extra data.
            mstore(0x00, id)
            mstore(0x1c, _ERC721_MASTER_SLOT_SEED)
            sstore(add(id, add(id, keccak256(0x00, 0x20))), or(shl(160, value), to))
            // Increment the balance of the owner.
            {
                mstore(0x00, to)
                let balanceSlot := keccak256(0x0c, 0x1c)
                let balanceSlotPacked := add(sload(balanceSlot), 1)
                // Revert if `to` is the zero address, or if the account balance overflows.
                if iszero(mul(to, and(balanceSlotPacked, _MAX_ACCOUNT_BALANCE))) {
                    // `TransferToZeroAddress()`, `AccountBalanceOverflow()`.
                    mstore(shl(2, iszero(to)), 0xea553b3401336cea)
                    revert(0x1c, 0x04)
                }
                sstore(balanceSlot, balanceSlotPacked)
            }
            // Emit the {Transfer} event.
            log4(codesize(), 0x00, _TRANSFER_EVENT_SIGNATURE, 0, to, id)
        }
        _afterTokenTransfer(address(0), to, id);
    }

    /// @dev Equivalent to `_safeMint(to, id, "")`.
    function _safeMint(address to, uint256 id) internal virtual {
        _safeMint(to, id, "");
    }

    /// @dev Mints token `id` to `to`.
    ///
    /// Requirements:
    ///
    /// - Token `id` must not exist.
    /// - `to` cannot be the zero address.
    /// - If `to` refers to a smart contract, it must implement
    ///   {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
    ///
    /// Emits a {Transfer} event.
    function _safeMint(address to, uint256 id, bytes memory data) internal virtual {
        _mint(to, id);
        if (_hasCode(to)) _checkOnERC721Received(address(0), to, id, data);
    }

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                  INTERNAL BURN FUNCTIONS                   */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Equivalent to `_burn(address(0), id)`.
    function _burn(uint256 id) internal virtual {
        _burn(address(0), id);
    }

    /// @dev Destroys token `id`, using `by`.
    ///
    /// Requirements:
    ///
    /// - Token `id` must exist.
    /// - If `by` is not the zero address,
    ///   it must be the owner of the token, or be approved to manage the token.
    ///
    /// Emits a {Transfer} event.
    function _burn(address by, uint256 id) internal virtual {
        address owner = ownerOf(id);
        _beforeTokenTransfer(owner, address(0), id);
        /// @solidity memory-safe-assembly
        assembly {
            // Clear the upper 96 bits.
            by := shr(96, shl(96, by))
            // Load the ownership data.
            mstore(0x00, id)
            mstore(0x1c, or(_ERC721_MASTER_SLOT_SEED, by))
            let ownershipSlot := add(id, add(id, keccak256(0x00, 0x20)))
            let ownershipPacked := sload(ownershipSlot)
            // Reload the owner in case it is changed in `_beforeTokenTransfer`.
            owner := shr(96, shl(96, ownershipPacked))
            // Revert if the token does not exist.
            if iszero(owner) {
                mstore(0x00, 0xceea21b6) // `TokenDoesNotExist()`.
                revert(0x1c, 0x04)
            }
            // Load and check the token approval.
            {
                mstore(0x00, owner)
                let approvedAddress := sload(add(1, ownershipSlot))
                // If `by` is not the zero address, do the authorization check.
                // Revert if the `by` is not the owner, nor approved.
                if iszero(or(iszero(by), or(eq(by, owner), eq(by, approvedAddress)))) {
                    if iszero(sload(keccak256(0x0c, 0x30))) {
                        mstore(0x00, 0x4b6e7f18) // `NotOwnerNorApproved()`.
                        revert(0x1c, 0x04)
                    }
                }
                // Delete the approved address if any.
                if approvedAddress { sstore(add(1, ownershipSlot), 0) }
            }
            // Clear the owner.
            sstore(ownershipSlot, xor(ownershipPacked, owner))
            // Decrement the balance of `owner`.
            {
                let balanceSlot := keccak256(0x0c, 0x1c)
                sstore(balanceSlot, sub(sload(balanceSlot), 1))
            }
            // Emit the {Transfer} event.
            log4(codesize(), 0x00, _TRANSFER_EVENT_SIGNATURE, owner, 0, id)
        }
        _afterTokenTransfer(owner, address(0), id);
    }

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                INTERNAL APPROVAL FUNCTIONS                 */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Returns whether `account` is the owner of token `id`, or is approved to manage it.
    ///
    /// Requirements:
    /// - Token `id` must exist.
    function _isApprovedOrOwner(address account, uint256 id)
        internal
        view
        virtual
        returns (bool result)
    {
        /// @solidity memory-safe-assembly
        assembly {
            result := 1
            // Clear the upper 96 bits.
            account := shr(96, shl(96, account))
            // Load the ownership data.
            mstore(0x00, id)
            mstore(0x1c, or(_ERC721_MASTER_SLOT_SEED, account))
            let ownershipSlot := add(id, add(id, keccak256(0x00, 0x20)))
            let owner := shr(96, shl(96, sload(ownershipSlot)))
            // Revert if the token does not exist.
            if iszero(owner) {
                mstore(0x00, 0xceea21b6) // `TokenDoesNotExist()`.
                revert(0x1c, 0x04)
            }
            // Check if `account` is the `owner`.
            if iszero(eq(account, owner)) {
                mstore(0x00, owner)
                // Check if `account` is approved to manage the token.
                if iszero(sload(keccak256(0x0c, 0x30))) {
                    result := eq(account, sload(add(1, ownershipSlot)))
                }
            }
        }
    }

    /// @dev Returns the account approved to manage token `id`.
    /// Returns the zero address instead of reverting if the token does not exist.
    function _getApproved(uint256 id) internal view virtual returns (address result) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, id)
            mstore(0x1c, _ERC721_MASTER_SLOT_SEED)
            result := sload(add(1, add(id, add(id, keccak256(0x00, 0x20)))))
        }
    }

    /// @dev Equivalent to `_approve(address(0), account, id)`.
    function _approve(address account, uint256 id) internal virtual {
        _approve(address(0), account, id);
    }

    /// @dev Sets `account` as the approved account to manage token `id`, using `by`.
    ///
    /// Requirements:
    /// - Token `id` must exist.
    /// - If `by` is not the zero address, `by` must be the owner
    ///   or an approved operator for the token owner.
    ///
    /// Emits a {Approval} event.
    function _approve(address by, address account, uint256 id) internal virtual {
        /// @solidity memory-safe-assembly
        assembly {
            // Clear the upper 96 bits.
            let bitmaskAddress := shr(96, not(0))
            account := and(bitmaskAddress, account)
            by := and(bitmaskAddress, by)
            // Load the owner of the token.
            mstore(0x00, id)
            mstore(0x1c, or(_ERC721_MASTER_SLOT_SEED, by))
            let ownershipSlot := add(id, add(id, keccak256(0x00, 0x20)))
            let owner := and(bitmaskAddress, sload(ownershipSlot))
            // Revert if the token does not exist.
            if iszero(owner) {
                mstore(0x00, 0xceea21b6) // `TokenDoesNotExist()`.
                revert(0x1c, 0x04)
            }
            // If `by` is not the zero address, do the authorization check.
            // Revert if `by` is not the owner, nor approved.
            if iszero(or(iszero(by), eq(by, owner))) {
                mstore(0x00, owner)
                if iszero(sload(keccak256(0x0c, 0x30))) {
                    mstore(0x00, 0x4b6e7f18) // `NotOwnerNorApproved()`.
                    revert(0x1c, 0x04)
                }
            }
            // Sets `account` as the approved account to manage `id`.
            sstore(add(1, ownershipSlot), account)
            // Emit the {Approval} event.
            log4(codesize(), 0x00, _APPROVAL_EVENT_SIGNATURE, owner, account, id)
        }
    }

    /// @dev Approve or remove the `operator` as an operator for `by`,
    /// without authorization checks.
    ///
    /// Emits an {ApprovalForAll} event.
    function _setApprovalForAll(address by, address operator, bool isApproved) internal virtual {
        /// @solidity memory-safe-assembly
        assembly {
            // Clear the upper 96 bits.
            by := shr(96, shl(96, by))
            operator := shr(96, shl(96, operator))
            // Convert to 0 or 1.
            isApproved := iszero(iszero(isApproved))
            // Update the `isApproved` for (`by`, `operator`).
            mstore(0x1c, or(_ERC721_MASTER_SLOT_SEED, operator))
            mstore(0x00, by)
            sstore(keccak256(0x0c, 0x30), isApproved)
            // Emit the {ApprovalForAll} event.
            mstore(0x00, isApproved)
            log3(0x00, 0x20, _APPROVAL_FOR_ALL_EVENT_SIGNATURE, by, operator)
        }
    }

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                INTERNAL TRANSFER FUNCTIONS                 */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Equivalent to `_transfer(address(0), from, to, id)`.
    function _transfer(address from, address to, uint256 id) internal virtual {
        _transfer(address(0), from, to, id);
    }

    /// @dev Transfers token `id` from `from` to `to`.
    ///
    /// Requirements:
    ///
    /// - Token `id` must exist.
    /// - `from` must be the owner of the token.
    /// - `to` cannot be the zero address.
    /// - If `by` is not the zero address,
    ///   it must be the owner of the token, or be approved to manage the token.
    ///
    /// Emits a {Transfer} event.
    function _transfer(address by, address from, address to, uint256 id) internal virtual {
        _beforeTokenTransfer(from, to, id);
        /// @solidity memory-safe-assembly
        assembly {
            // Clear the upper 96 bits.
            let bitmaskAddress := shr(96, not(0))
            from := and(bitmaskAddress, from)
            to := and(bitmaskAddress, to)
            by := and(bitmaskAddress, by)
            // Load the ownership data.
            mstore(0x00, id)
            mstore(0x1c, or(_ERC721_MASTER_SLOT_SEED, by))
            let ownershipSlot := add(id, add(id, keccak256(0x00, 0x20)))
            let ownershipPacked := sload(ownershipSlot)
            let owner := and(bitmaskAddress, ownershipPacked)
            // Revert if the token does not exist, or if `from` is not the owner.
            if iszero(mul(owner, eq(owner, from))) {
                // `TokenDoesNotExist()`, `TransferFromIncorrectOwner()`.
                mstore(shl(2, iszero(owner)), 0xceea21b6a1148100)
                revert(0x1c, 0x04)
            }
            // Load, check, and update the token approval.
            {
                mstore(0x00, from)
                let approvedAddress := sload(add(1, ownershipSlot))
                // If `by` is not the zero address, do the authorization check.
                // Revert if the `by` is not the owner, nor approved.
                if iszero(or(iszero(by), or(eq(by, from), eq(by, approvedAddress)))) {
                    if iszero(sload(keccak256(0x0c, 0x30))) {
                        mstore(0x00, 0x4b6e7f18) // `NotOwnerNorApproved()`.
                        revert(0x1c, 0x04)
                    }
                }
                // Delete the approved address if any.
                if approvedAddress { sstore(add(1, ownershipSlot), 0) }
            }
            // Update with the new owner.
            sstore(ownershipSlot, xor(ownershipPacked, xor(from, to)))
            // Decrement the balance of `from`.
            {
                let fromBalanceSlot := keccak256(0x0c, 0x1c)
                sstore(fromBalanceSlot, sub(sload(fromBalanceSlot), 1))
            }
            // Increment the balance of `to`.
            {
                mstore(0x00, to)
                let toBalanceSlot := keccak256(0x0c, 0x1c)
                let toBalanceSlotPacked := add(sload(toBalanceSlot), 1)
                // Revert if `to` is the zero address, or if the account balance overflows.
                if iszero(mul(to, and(toBalanceSlotPacked, _MAX_ACCOUNT_BALANCE))) {
                    // `TransferToZeroAddress()`, `AccountBalanceOverflow()`.
                    mstore(shl(2, iszero(to)), 0xea553b3401336cea)
                    revert(0x1c, 0x04)
                }
                sstore(toBalanceSlot, toBalanceSlotPacked)
            }
            // Emit the {Transfer} event.
            log4(codesize(), 0x00, _TRANSFER_EVENT_SIGNATURE, from, to, id)
        }
        _afterTokenTransfer(from, to, id);
    }

    /// @dev Equivalent to `_safeTransfer(from, to, id, "")`.
    function _safeTransfer(address from, address to, uint256 id) internal virtual {
        _safeTransfer(from, to, id, "");
    }

    /// @dev Transfers token `id` from `from` to `to`.
    ///
    /// Requirements:
    ///
    /// - Token `id` must exist.
    /// - `from` must be the owner of the token.
    /// - `to` cannot be the zero address.
    /// - The caller must be the owner of the token, or be approved to manage the token.
    /// - If `to` refers to a smart contract, it must implement
    ///   {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
    ///
    /// Emits a {Transfer} event.
    function _safeTransfer(address from, address to, uint256 id, bytes memory data)
        internal
        virtual
    {
        _transfer(address(0), from, to, id);
        if (_hasCode(to)) _checkOnERC721Received(from, to, id, data);
    }

    /// @dev Equivalent to `_safeTransfer(by, from, to, id, "")`.
    function _safeTransfer(address by, address from, address to, uint256 id) internal virtual {
        _safeTransfer(by, from, to, id, "");
    }

    /// @dev Transfers token `id` from `from` to `to`.
    ///
    /// Requirements:
    ///
    /// - Token `id` must exist.
    /// - `from` must be the owner of the token.
    /// - `to` cannot be the zero address.
    /// - If `by` is not the zero address,
    ///   it must be the owner of the token, or be approved to manage the token.
    /// - If `to` refers to a smart contract, it must implement
    ///   {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
    ///
    /// Emits a {Transfer} event.
    function _safeTransfer(address by, address from, address to, uint256 id, bytes memory data)
        internal
        virtual
    {
        _transfer(by, from, to, id);
        if (_hasCode(to)) _checkOnERC721Received(from, to, id, data);
    }

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                    HOOKS FOR OVERRIDING                    */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Hook that is called before any token transfers, including minting and burning.
    function _beforeTokenTransfer(address from, address to, uint256 id) internal virtual {}

    /// @dev Hook that is called after any token transfers, including minting and burning.
    function _afterTokenTransfer(address from, address to, uint256 id) internal virtual {}

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                      PRIVATE HELPERS                       */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Returns if `a` has bytecode of non-zero length.
    function _hasCode(address a) private view returns (bool result) {
        /// @solidity memory-safe-assembly
        assembly {
            result := extcodesize(a) // Can handle dirty upper bits.
        }
    }

    /// @dev Perform a call to invoke {IERC721Receiver-onERC721Received} on `to`.
    /// Reverts if the target does not support the function correctly.
    function _checkOnERC721Received(address from, address to, uint256 id, bytes memory data)
        private
    {
        /// @solidity memory-safe-assembly
        assembly {
            // Prepare the calldata.
            let m := mload(0x40)
            let onERC721ReceivedSelector := 0x150b7a02
            mstore(m, onERC721ReceivedSelector)
            mstore(add(m, 0x20), caller()) // The `operator`, which is always `msg.sender`.
            mstore(add(m, 0x40), shr(96, shl(96, from)))
            mstore(add(m, 0x60), id)
            mstore(add(m, 0x80), 0x80)
            let n := mload(data)
            mstore(add(m, 0xa0), n)
            if n { pop(staticcall(gas(), 4, add(data, 0x20), n, add(m, 0xc0), n)) }
            // Revert if the call reverts.
            if iszero(call(gas(), to, 0, add(m, 0x1c), add(n, 0xa4), m, 0x20)) {
                if returndatasize() {
                    // Bubble up the revert if the call reverts.
                    returndatacopy(m, 0x00, returndatasize())
                    revert(m, returndatasize())
                }
            }
            // Load the returndata and compare it.
            if iszero(eq(mload(m), shl(224, onERC721ReceivedSelector))) {
                mstore(0x00, 0xd1a57ed6) // `TransferToNonERC721ReceiverImplementer()`.
                revert(0x1c, 0x04)
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.5.0) (utils/Strings.sol)

pragma solidity ^0.8.24;

import {Math} from "./math/Math.sol";
import {SafeCast} from "./math/SafeCast.sol";
import {SignedMath} from "./math/SignedMath.sol";
import {Bytes} from "./Bytes.sol";

/**
 * @dev String operations.
 */
library Strings {
    using SafeCast for *;

    bytes16 private constant HEX_DIGITS = "0123456789abcdef";
    uint8 private constant ADDRESS_LENGTH = 20;
    uint256 private constant SPECIAL_CHARS_LOOKUP =
        (1 << 0x08) | // backspace
            (1 << 0x09) | // tab
            (1 << 0x0a) | // newline
            (1 << 0x0c) | // form feed
            (1 << 0x0d) | // carriage return
            (1 << 0x22) | // double quote
            (1 << 0x5c); // backslash

    /**
     * @dev The `value` string doesn't fit in the specified `length`.
     */
    error StringsInsufficientHexLength(uint256 value, uint256 length);

    /**
     * @dev The string being parsed contains characters that are not in scope of the given base.
     */
    error StringsInvalidChar();

    /**
     * @dev The string being parsed is not a properly formatted address.
     */
    error StringsInvalidAddressFormat();

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            assembly ("memory-safe") {
                ptr := add(add(buffer, 0x20), length)
            }
            while (true) {
                ptr--;
                assembly ("memory-safe") {
                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toStringSigned(int256 value) internal pure returns (string memory) {
        return string.concat(value < 0 ? "-" : "", toString(SignedMath.abs(value)));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        uint256 localValue = value;
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = HEX_DIGITS[localValue & 0xf];
            localValue >>= 4;
        }
        if (localValue != 0) {
            revert StringsInsufficientHexLength(value, length);
        }
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal
     * representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its checksummed ASCII `string` hexadecimal
     * representation, according to EIP-55.
     */
    function toChecksumHexString(address addr) internal pure returns (string memory) {
        bytes memory buffer = bytes(toHexString(addr));

        // hash the hex part of buffer (skip length + 2 bytes, length 40)
        uint256 hashValue;
        assembly ("memory-safe") {
            hashValue := shr(96, keccak256(add(buffer, 0x22), 40))
        }

        for (uint256 i = 41; i > 1; --i) {
            // possible values for buffer[i] are 48 (0) to 57 (9) and 97 (a) to 102 (f)
            if (hashValue & 0xf > 7 && uint8(buffer[i]) > 96) {
                // case shift by xoring with 0x20
                buffer[i] ^= 0x20;
            }
            hashValue >>= 4;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `bytes` buffer to its ASCII `string` hexadecimal representation.
     */
    function toHexString(bytes memory input) internal pure returns (string memory) {
        unchecked {
            bytes memory buffer = new bytes(2 * input.length + 2);
            buffer[0] = "0";
            buffer[1] = "x";
            for (uint256 i = 0; i < input.length; ++i) {
                uint8 v = uint8(input[i]);
                buffer[2 * i + 2] = HEX_DIGITS[v >> 4];
                buffer[2 * i + 3] = HEX_DIGITS[v & 0xf];
            }
            return string(buffer);
        }
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return Bytes.equal(bytes(a), bytes(b));
    }

    /**
     * @dev Parse a decimal string and returns the value as a `uint256`.
     *
     * Requirements:
     * - The string must be formatted as `[0-9]*`
     * - The result must fit into an `uint256` type
     */
    function parseUint(string memory input) internal pure returns (uint256) {
        return parseUint(input, 0, bytes(input).length);
    }

    /**
     * @dev Variant of {parseUint-string} that parses a substring of `input` located between position `begin` (included) and
     * `end` (excluded).
     *
     * Requirements:
     * - The substring must be formatted as `[0-9]*`
     * - The result must fit into an `uint256` type
     */
    function parseUint(string memory input, uint256 begin, uint256 end) internal pure returns (uint256) {
        (bool success, uint256 value) = tryParseUint(input, begin, end);
        if (!success) revert StringsInvalidChar();
        return value;
    }

    /**
     * @dev Variant of {parseUint-string} that returns false if the parsing fails because of an invalid character.
     *
     * NOTE: This function will revert if the result does not fit in a `uint256`.
     */
    function tryParseUint(string memory input) internal pure returns (bool success, uint256 value) {
        return _tryParseUintUncheckedBounds(input, 0, bytes(input).length);
    }

    /**
     * @dev Variant of {parseUint-string-uint256-uint256} that returns false if the parsing fails because of an invalid
     * character.
     *
     * NOTE: This function will revert if the result does not fit in a `uint256`.
     */
    function tryParseUint(
        string memory input,
        uint256 begin,
        uint256 end
    ) internal pure returns (bool success, uint256 value) {
        if (end > bytes(input).length || begin > end) return (false, 0);
        return _tryParseUintUncheckedBounds(input, begin, end);
    }

    /**
     * @dev Implementation of {tryParseUint-string-uint256-uint256} that does not check bounds. Caller should make sure that
     * `begin <= end <= input.length`. Other inputs would result in undefined behavior.
     */
    function _tryParseUintUncheckedBounds(
        string memory input,
        uint256 begin,
        uint256 end
    ) private pure returns (bool success, uint256 value) {
        bytes memory buffer = bytes(input);

        uint256 result = 0;
        for (uint256 i = begin; i < end; ++i) {
            uint8 chr = _tryParseChr(bytes1(_unsafeReadBytesOffset(buffer, i)));
            if (chr > 9) return (false, 0);
            result *= 10;
            result += chr;
        }
        return (true, result);
    }

    /**
     * @dev Parse a decimal string and returns the value as a `int256`.
     *
     * Requirements:
     * - The string must be formatted as `[-+]?[0-9]*`
     * - The result must fit in an `int256` type.
     */
    function parseInt(string memory input) internal pure returns (int256) {
        return parseInt(input, 0, bytes(input).length);
    }

    /**
     * @dev Variant of {parseInt-string} that parses a substring of `input` located between position `begin` (included) and
     * `end` (excluded).
     *
     * Requirements:
     * - The substring must be formatted as `[-+]?[0-9]*`
     * - The result must fit in an `int256` type.
     */
    function parseInt(string memory input, uint256 begin, uint256 end) internal pure returns (int256) {
        (bool success, int256 value) = tryParseInt(input, begin, end);
        if (!success) revert StringsInvalidChar();
        return value;
    }

    /**
     * @dev Variant of {parseInt-string} that returns false if the parsing fails because of an invalid character or if
     * the result does not fit in a `int256`.
     *
     * NOTE: This function will revert if the absolute value of the result does not fit in a `uint256`.
     */
    function tryParseInt(string memory input) internal pure returns (bool success, int256 value) {
        return _tryParseIntUncheckedBounds(input, 0, bytes(input).length);
    }

    uint256 private constant ABS_MIN_INT256 = 2 ** 255;

    /**
     * @dev Variant of {parseInt-string-uint256-uint256} that returns false if the parsing fails because of an invalid
     * character or if the result does not fit in a `int256`.
     *
     * NOTE: This function will revert if the absolute value of the result does not fit in a `uint256`.
     */
    function tryParseInt(
        string memory input,
        uint256 begin,
        uint256 end
    ) internal pure returns (bool success, int256 value) {
        if (end > bytes(input).length || begin > end) return (false, 0);
        return _tryParseIntUncheckedBounds(input, begin, end);
    }

    /**
     * @dev Implementation of {tryParseInt-string-uint256-uint256} that does not check bounds. Caller should make sure that
     * `begin <= end <= input.length`. Other inputs would result in undefined behavior.
     */
    function _tryParseIntUncheckedBounds(
        string memory input,
        uint256 begin,
        uint256 end
    ) private pure returns (bool success, int256 value) {
        bytes memory buffer = bytes(input);

        // Check presence of a negative sign.
        bytes1 sign = begin == end ? bytes1(0) : bytes1(_unsafeReadBytesOffset(buffer, begin)); // don't do out-of-bound (possibly unsafe) read if sub-string is empty
        bool positiveSign = sign == bytes1("+");
        bool negativeSign = sign == bytes1("-");
        uint256 offset = (positiveSign || negativeSign).toUint();

        (bool absSuccess, uint256 absValue) = tryParseUint(input, begin + offset, end);

        if (absSuccess && absValue < ABS_MIN_INT256) {
            return (true, negativeSign ? -int256(absValue) : int256(absValue));
        } else if (absSuccess && negativeSign && absValue == ABS_MIN_INT256) {
            return (true, type(int256).min);
        } else return (false, 0);
    }

    /**
     * @dev Parse a hexadecimal string (with or without "0x" prefix), and returns the value as a `uint256`.
     *
     * Requirements:
     * - The string must be formatted as `(0x)?[0-9a-fA-F]*`
     * - The result must fit in an `uint256` type.
     */
    function parseHexUint(string memory input) internal pure returns (uint256) {
        return parseHexUint(input, 0, bytes(input).length);
    }

    /**
     * @dev Variant of {parseHexUint-string} that parses a substring of `input` located between position `begin` (included) and
     * `end` (excluded).
     *
     * Requirements:
     * - The substring must be formatted as `(0x)?[0-9a-fA-F]*`
     * - The result must fit in an `uint256` type.
     */
    function parseHexUint(string memory input, uint256 begin, uint256 end) internal pure returns (uint256) {
        (bool success, uint256 value) = tryParseHexUint(input, begin, end);
        if (!success) revert StringsInvalidChar();
        return value;
    }

    /**
     * @dev Variant of {parseHexUint-string} that returns false if the parsing fails because of an invalid character.
     *
     * NOTE: This function will revert if the result does not fit in a `uint256`.
     */
    function tryParseHexUint(string memory input) internal pure returns (bool success, uint256 value) {
        return _tryParseHexUintUncheckedBounds(input, 0, bytes(input).length);
    }

    /**
     * @dev Variant of {parseHexUint-string-uint256-uint256} that returns false if the parsing fails because of an
     * invalid character.
     *
     * NOTE: This function will revert if the result does not fit in a `uint256`.
     */
    function tryParseHexUint(
        string memory input,
        uint256 begin,
        uint256 end
    ) internal pure returns (bool success, uint256 value) {
        if (end > bytes(input).length || begin > end) return (false, 0);
        return _tryParseHexUintUncheckedBounds(input, begin, end);
    }

    /**
     * @dev Implementation of {tryParseHexUint-string-uint256-uint256} that does not check bounds. Caller should make sure that
     * `begin <= end <= input.length`. Other inputs would result in undefined behavior.
     */
    function _tryParseHexUintUncheckedBounds(
        string memory input,
        uint256 begin,
        uint256 end
    ) private pure returns (bool success, uint256 value) {
        bytes memory buffer = bytes(input);

        // skip 0x prefix if present
        bool hasPrefix = (end > begin + 1) && bytes2(_unsafeReadBytesOffset(buffer, begin)) == bytes2("0x"); // don't do out-of-bound (possibly unsafe) read if sub-string is empty
        uint256 offset = hasPrefix.toUint() * 2;

        uint256 result = 0;
        for (uint256 i = begin + offset; i < end; ++i) {
            uint8 chr = _tryParseChr(bytes1(_unsafeReadBytesOffset(buffer, i)));
            if (chr > 15) return (false, 0);
            result *= 16;
            unchecked {
                // Multiplying by 16 is equivalent to a shift of 4 bits (with additional overflow check).
                // This guarantees that adding a value < 16 will not cause an overflow, hence the unchecked.
                result += chr;
            }
        }
        return (true, result);
    }

    /**
     * @dev Parse a hexadecimal string (with or without "0x" prefix), and returns the value as an `address`.
     *
     * Requirements:
     * - The string must be formatted as `(0x)?[0-9a-fA-F]{40}`
     */
    function parseAddress(string memory input) internal pure returns (address) {
        return parseAddress(input, 0, bytes(input).length);
    }

    /**
     * @dev Variant of {parseAddress-string} that parses a substring of `input` located between position `begin` (included) and
     * `end` (excluded).
     *
     * Requirements:
     * - The substring must be formatted as `(0x)?[0-9a-fA-F]{40}`
     */
    function parseAddress(string memory input, uint256 begin, uint256 end) internal pure returns (address) {
        (bool success, address value) = tryParseAddress(input, begin, end);
        if (!success) revert StringsInvalidAddressFormat();
        return value;
    }

    /**
     * @dev Variant of {parseAddress-string} that returns false if the parsing fails because the input is not a properly
     * formatted address. See {parseAddress-string} requirements.
     */
    function tryParseAddress(string memory input) internal pure returns (bool success, address value) {
        return tryParseAddress(input, 0, bytes(input).length);
    }

    /**
     * @dev Variant of {parseAddress-string-uint256-uint256} that returns false if the parsing fails because input is not a properly
     * formatted address. See {parseAddress-string-uint256-uint256} requirements.
     */
    function tryParseAddress(
        string memory input,
        uint256 begin,
        uint256 end
    ) internal pure returns (bool success, address value) {
        if (end > bytes(input).length || begin > end) return (false, address(0));

        bool hasPrefix = (end > begin + 1) && bytes2(_unsafeReadBytesOffset(bytes(input), begin)) == bytes2("0x"); // don't do out-of-bound (possibly unsafe) read if sub-string is empty
        uint256 expectedLength = 40 + hasPrefix.toUint() * 2;

        // check that input is the correct length
        if (end - begin == expectedLength) {
            // length guarantees that this does not overflow, and value is at most type(uint160).max
            (bool s, uint256 v) = _tryParseHexUintUncheckedBounds(input, begin, end);
            return (s, address(uint160(v)));
        } else {
            return (false, address(0));
        }
    }

    function _tryParseChr(bytes1 chr) private pure returns (uint8) {
        uint8 value = uint8(chr);

        // Try to parse `chr`:
        // - Case 1: [0-9]
        // - Case 2: [a-f]
        // - Case 3: [A-F]
        // - otherwise not supported
        unchecked {
            if (value > 47 && value < 58) value -= 48;
            else if (value > 96 && value < 103) value -= 87;
            else if (value > 64 && value < 71) value -= 55;
            else return type(uint8).max;
        }

        return value;
    }

    /**
     * @dev Escape special characters in JSON strings. This can be useful to prevent JSON injection in NFT metadata.
     *
     * WARNING: This function should only be used in double quoted JSON strings. Single quotes are not escaped.
     *
     * NOTE: This function escapes all unicode characters, and not just the ones in ranges defined in section 2.5 of
     * RFC-4627 (U+0000 to U+001F, U+0022 and U+005C). ECMAScript's `JSON.parse` does recover escaped unicode
     * characters that are not in this range, but other tooling may provide different results.
     */
    function escapeJSON(string memory input) internal pure returns (string memory) {
        bytes memory buffer = bytes(input);
        bytes memory output = new bytes(2 * buffer.length); // worst case scenario
        uint256 outputLength = 0;

        for (uint256 i = 0; i < buffer.length; ++i) {
            bytes1 char = bytes1(_unsafeReadBytesOffset(buffer, i));
            if (((SPECIAL_CHARS_LOOKUP & (1 << uint8(char))) != 0)) {
                output[outputLength++] = "\\";
                if (char == 0x08) output[outputLength++] = "b";
                else if (char == 0x09) output[outputLength++] = "t";
                else if (char == 0x0a) output[outputLength++] = "n";
                else if (char == 0x0c) output[outputLength++] = "f";
                else if (char == 0x0d) output[outputLength++] = "r";
                else if (char == 0x5c) output[outputLength++] = "\\";
                else if (char == 0x22) {
                    // solhint-disable-next-line quotes
                    output[outputLength++] = '"';
                }
            } else {
                output[outputLength++] = char;
            }
        }
        // write the actual length and deallocate unused memory
        assembly ("memory-safe") {
            mstore(output, outputLength)
            mstore(0x40, add(output, shl(5, shr(5, add(outputLength, 63)))))
        }

        return string(output);
    }

    /**
     * @dev Reads a bytes32 from a bytes array without bounds checking.
     *
     * NOTE: making this function internal would mean it could be used with memory unsafe offset, and marking the
     * assembly block as such would prevent some optimizations.
     */
    function _unsafeReadBytesOffset(bytes memory buffer, uint256 offset) private pure returns (bytes32 value) {
        // This is not memory safe in the general case, but all calls to this private function are within bounds.
        assembly ("memory-safe") {
            value := mload(add(add(buffer, 0x20), offset))
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.5.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.20;

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS
    }

    /**
     * @dev The signature derives the `address(0)`.
     */
    error ECDSAInvalidSignature();

    /**
     * @dev The signature has an invalid length.
     */
    error ECDSAInvalidSignatureLength(uint256 length);

    /**
     * @dev The signature has an S value that is in the upper half order.
     */
    error ECDSAInvalidSignatureS(bytes32 s);

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with `signature` or an error. This will not
     * return address(0) without also returning an error description. Errors are documented using an enum (error type)
     * and a bytes32 providing additional information about the error.
     *
     * If no error is returned, then the address can be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * NOTE: This function only supports 65-byte signatures. ERC-2098 short signatures are rejected. This restriction
     * is DEPRECATED and will be removed in v6.0. Developers SHOULD NOT use signatures as unique identifiers; use hash
     * invalidation or nonces for replay protection.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     *
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     */
    function tryRecover(
        bytes32 hash,
        bytes memory signature
    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            assembly ("memory-safe") {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));
        }
    }

    /**
     * @dev Variant of {tryRecover} that takes a signature in calldata
     */
    function tryRecoverCalldata(
        bytes32 hash,
        bytes calldata signature
    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, calldata slices would work here, but are
            // significantly more expensive (length check) than using calldataload in assembly.
            assembly ("memory-safe") {
                r := calldataload(signature.offset)
                s := calldataload(add(signature.offset, 0x20))
                v := byte(0, calldataload(add(signature.offset, 0x40)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * NOTE: This function only supports 65-byte signatures. ERC-2098 short signatures are rejected. This restriction
     * is DEPRECATED and will be removed in v6.0. Developers SHOULD NOT use signatures as unique identifiers; use hash
     * invalidation or nonces for replay protection.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, signature);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Variant of {recover} that takes a signature in calldata
     */
    function recoverCalldata(bytes32 hash, bytes calldata signature) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecoverCalldata(hash, signature);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[ERC-2098 short signatures]
     */
    function tryRecover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {
        unchecked {
            bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
            // We do not check for an overflow here since the shift operation results in 0 or 1.
            uint8 v = uint8((uint256(vs) >> 255) + 27);
            return tryRecover(hash, v, r, s);
        }
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, r, vs);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address recovered, RecoverError err, bytes32 errArg) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS, s);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature, bytes32(0));
        }

        return (signer, RecoverError.NoError, bytes32(0));
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, v, r, s);
        _throwError(error, errorArg);
        return recovered;
    }

    /**
     * @dev Parse a signature into its `v`, `r` and `s` components. Supports 65-byte and 64-byte (ERC-2098)
     * formats. Returns (0,0,0) for invalid signatures.
     *
     * For 64-byte signatures, `v` is automatically normalized to 27 or 28.
     * For 65-byte signatures, `v` is returned as-is and MUST already be 27 or 28 for use with ecrecover.
     *
     * Consider validating the result before use, or use {tryRecover}/{recover} which perform full validation.
     */
    function parse(bytes memory signature) internal pure returns (uint8 v, bytes32 r, bytes32 s) {
        assembly ("memory-safe") {
            // Check the signature length
            switch mload(signature)
            // - case 65: r,s,v signature (standard)
            case 65 {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            // - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098)
            case 64 {
                let vs := mload(add(signature, 0x40))
                r := mload(add(signature, 0x20))
                s := and(vs, shr(1, not(0)))
                v := add(shr(255, vs), 27)
            }
            default {
                r := 0
                s := 0
                v := 0
            }
        }
    }

    /**
     * @dev Variant of {parse} that takes a signature in calldata
     */
    function parseCalldata(bytes calldata signature) internal pure returns (uint8 v, bytes32 r, bytes32 s) {
        assembly ("memory-safe") {
            // Check the signature length
            switch signature.length
            // - case 65: r,s,v signature (standard)
            case 65 {
                r := calldataload(signature.offset)
                s := calldataload(add(signature.offset, 0x20))
                v := byte(0, calldataload(add(signature.offset, 0x40)))
            }
            // - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098)
            case 64 {
                let vs := calldataload(add(signature.offset, 0x20))
                r := calldataload(signature.offset)
                s := and(vs, shr(1, not(0)))
                v := add(shr(255, vs), 27)
            }
            default {
                r := 0
                s := 0
                v := 0
            }
        }
    }

    /**
     * @dev Optionally reverts with the corresponding custom error according to the `error` argument provided.
     */
    function _throwError(RecoverError error, bytes32 errorArg) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert ECDSAInvalidSignature();
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert ECDSAInvalidSignatureLength(uint256(errorArg));
        } else if (error == RecoverError.InvalidSignatureS) {
            revert ECDSAInvalidSignatureS(errorArg);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.5.0) (utils/cryptography/MessageHashUtils.sol)

pragma solidity ^0.8.24;

import {Strings} from "../Strings.sol";

/**
 * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.
 *
 * The library provides methods for generating a hash of a message that conforms to the
 * https://eips.ethereum.org/EIPS/eip-191[ERC-191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]
 * specifications.
 */
library MessageHashUtils {
    /**
     * @dev Returns the keccak256 digest of an ERC-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing a bytes32 `messageHash` with
     * `"\x19Ethereum Signed Message:\n32"` and hashing the result. It corresponds with the
     * hash signed when using the https://ethereum.org/en/developers/docs/apis/json-rpc/#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * NOTE: The `messageHash` parameter is intended to be the result of hashing a raw message with
     * keccak256, although any bytes32 value can be safely used because the final digest will
     * be re-hashed.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes32 messageHash) internal pure returns (bytes32 digest) {
        assembly ("memory-safe") {
            mstore(0x00, "\x19Ethereum Signed Message:\n32") // 32 is the bytes-length of messageHash
            mstore(0x1c, messageHash) // 0x1c (28) is the length of the prefix
            digest := keccak256(0x00, 0x3c) // 0x3c is the length of the prefix (0x1c) + messageHash (0x20)
        }
    }

    /**
     * @dev Returns the keccak256 digest of an ERC-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing an arbitrary `message` with
     * `"\x19Ethereum Signed Message:\n" + len(message)` and hashing the result. It corresponds with the
     * hash signed when using the https://ethereum.org/en/developers/docs/apis/json-rpc/#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes memory message) internal pure returns (bytes32) {
        return
            keccak256(bytes.concat("\x19Ethereum Signed Message:\n", bytes(Strings.toString(message.length)), message));
    }

    /**
     * @dev Returns the keccak256 digest of an ERC-191 signed data with version
     * `0x00` (data with intended validator).
     *
     * The digest is calculated by prefixing an arbitrary `data` with `"\x19\x00"` and the intended
     * `validator` address. Then hashing the result.
     *
     * See {ECDSA-recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(hex"19_00", validator, data));
    }

    /**
     * @dev Variant of {toDataWithIntendedValidatorHash-address-bytes} optimized for cases where `data` is a bytes32.
     */
    function toDataWithIntendedValidatorHash(
        address validator,
        bytes32 messageHash
    ) internal pure returns (bytes32 digest) {
        assembly ("memory-safe") {
            mstore(0x00, hex"19_00")
            mstore(0x02, shl(96, validator))
            mstore(0x16, messageHash)
            digest := keccak256(0x00, 0x36)
        }
    }

    /**
     * @dev Returns the keccak256 digest of an EIP-712 typed data (ERC-191 version `0x01`).
     *
     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with
     * `\x19\x01` and hashing the result. It corresponds to the hash signed by the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.
     *
     * See {ECDSA-recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 digest) {
        assembly ("memory-safe") {
            let ptr := mload(0x40)
            mstore(ptr, hex"19_01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            digest := keccak256(ptr, 0x42)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {Context} from "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.26;

import {MessageHashUtils} from "openzeppelin-contracts/contracts/utils/cryptography/MessageHashUtils.sol";

contract SigUtils {
    using MessageHashUtils for bytes32;

    // EIP-712 Domain typehash
    bytes32 private constant DOMAIN_TYPEHASH =
        keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");

    // Mint struct typehash
    bytes32 private constant MINT_TYPEHASH = keccak256("Mint(address recipient,uint256 nonce)");

    string public name;
    string public version;
    address public verifyingContract;

    error Unauthorized();

    constructor(string memory _name, string memory _version, address _verifyingContract) {
        require(_verifyingContract != address(0), "SigUtils: invalid verifying contract");
        name = _name;
        version = _version;
        verifyingContract = _verifyingContract;
    }

    /// @dev Updates the name used in the EIP-712 domain separator
    /// @notice Only the verifying contract can update the name
    /// @notice WARNING: Changing the name will invalidate all existing signatures
    function setName(string memory _name) external {
        if (msg.sender != verifyingContract) {
            revert Unauthorized();
        }
        name = _name;
    }

    function getDomainSeparator() public view returns (bytes32 result) {
        bytes32 domainTypeHash = DOMAIN_TYPEHASH;
        bytes32 nameHash = _hashString(name);
        bytes32 versionHash = _hashString(version);
        uint256 chainId = block.chainid;
        address contractAddr = verifyingContract;
        assembly ("memory-safe") {
            let ptr := mload(0x40)
            mstore(ptr, domainTypeHash)
            mstore(add(ptr, 0x20), nameHash)
            mstore(add(ptr, 0x40), versionHash)
            mstore(add(ptr, 0x60), chainId)
            mstore(add(ptr, 0x80), contractAddr)
            result := keccak256(ptr, 0xa0)
        }
    }

    function _hashString(string memory str) private pure returns (bytes32 result) {
        assembly ("memory-safe") {
            let length := mload(str)
            // Hash the entire bytes representation: length (32 bytes) + data
            result := keccak256(str, add(length, 0x20))
        }
    }

    function getStructHash(address recipient, uint256 nonce) public pure returns (bytes32 result) {
        bytes32 mintTypeHash = MINT_TYPEHASH;
        assembly ("memory-safe") {
            let ptr := mload(0x40)
            mstore(ptr, mintTypeHash)
            mstore(add(ptr, 0x20), recipient)
            mstore(add(ptr, 0x40), nonce)
            result := keccak256(ptr, 0x60)
        }
    }

    function getTypedDataHash(address recipient, uint256 nonce) public view returns (bytes32) {
        bytes32 structHash = getStructHash(recipient, nonce);
        return MessageHashUtils.toTypedDataHash(getDomainSeparator(), structHash);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.5.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

import {Panic} from "../Panic.sol";
import {SafeCast} from "./SafeCast.sol";

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Return the 512-bit addition of two uint256.
     *
     * The result is stored in two 256 variables such that sum = high * 2²⁵⁶ + low.
     */
    function add512(uint256 a, uint256 b) internal pure returns (uint256 high, uint256 low) {
        assembly ("memory-safe") {
            low := add(a, b)
            high := lt(low, a)
        }
    }

    /**
     * @dev Return the 512-bit multiplication of two uint256.
     *
     * The result is stored in two 256 variables such that product = high * 2²⁵⁶ + low.
     */
    function mul512(uint256 a, uint256 b) internal pure returns (uint256 high, uint256 low) {
        // 512-bit multiply [high low] = x * y. Compute the product mod 2²⁵⁶ and mod 2²⁵⁶ - 1, then use
        // the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
        // variables such that product = high * 2²⁵⁶ + low.
        assembly ("memory-safe") {
            let mm := mulmod(a, b, not(0))
            low := mul(a, b)
            high := sub(sub(mm, low), lt(mm, low))
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, with a success flag (no overflow).
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            uint256 c = a + b;
            success = c >= a;
            result = c * SafeCast.toUint(success);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with a success flag (no overflow).
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            uint256 c = a - b;
            success = c <= a;
            result = c * SafeCast.toUint(success);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with a success flag (no overflow).
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            uint256 c = a * b;
            assembly ("memory-safe") {
                // Only true when the multiplication doesn't overflow
                // (c / a == b) || (a == 0)
                success := or(eq(div(c, a), b), iszero(a))
            }
            // equivalent to: success ? c : 0
            result = c * SafeCast.toUint(success);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a success flag (no division by zero).
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            success = b > 0;
            assembly ("memory-safe") {
                // The `DIV` opcode returns zero when the denominator is 0.
                result := div(a, b)
            }
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a success flag (no division by zero).
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            success = b > 0;
            assembly ("memory-safe") {
                // The `MOD` opcode returns zero when the denominator is 0.
                result := mod(a, b)
            }
        }
    }

    /**
     * @dev Unsigned saturating addition, bounds to `2²⁵⁶ - 1` instead of overflowing.
     */
    function saturatingAdd(uint256 a, uint256 b) internal pure returns (uint256) {
        (bool success, uint256 result) = tryAdd(a, b);
        return ternary(success, result, type(uint256).max);
    }

    /**
     * @dev Unsigned saturating subtraction, bounds to zero instead of overflowing.
     */
    function saturatingSub(uint256 a, uint256 b) internal pure returns (uint256) {
        (, uint256 result) = trySub(a, b);
        return result;
    }

    /**
     * @dev Unsigned saturating multiplication, bounds to `2²⁵⁶ - 1` instead of overflowing.
     */
    function saturatingMul(uint256 a, uint256 b) internal pure returns (uint256) {
        (bool success, uint256 result) = tryMul(a, b);
        return ternary(success, result, type(uint256).max);
    }

    /**
     * @dev Branchless ternary evaluation for `condition ? a : b`. Gas costs are constant.
     *
     * IMPORTANT: This function may reduce bytecode size and consume less gas when used standalone.
     * However, the compiler may optimize Solidity ternary operations (i.e. `condition ? a : b`) to only compute
     * one branch when needed, making this function more expensive.
     */
    function ternary(bool condition, uint256 a, uint256 b) internal pure returns (uint256) {
        unchecked {
            // branchless ternary works because:
            // b ^ (a ^ b) == a
            // b ^ 0 == b
            return b ^ ((a ^ b) * SafeCast.toUint(condition));
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return ternary(a > b, a, b);
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return ternary(a < b, a, b);
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            Panic.panic(Panic.DIVISION_BY_ZERO);
        }

        // The following calculation ensures accurate ceiling division without overflow.
        // Since a is non-zero, (a - 1) / b will not overflow.
        // The largest possible result occurs when (a - 1) / b is type(uint256).max,
        // but the largest value we can obtain is type(uint256).max - 1, which happens
        // when a = type(uint256).max and b = 1.
        unchecked {
            return SafeCast.toUint(a > 0) * ((a - 1) / b + 1);
        }
    }

    /**
     * @dev Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     *
     * Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            (uint256 high, uint256 low) = mul512(x, y);

            // Handle non-overflow cases, 256 by 256 division.
            if (high == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return low / denominator;
            }

            // Make sure the result is less than 2²⁵⁶. Also prevents denominator == 0.
            if (denominator <= high) {
                Panic.panic(ternary(denominator == 0, Panic.DIVISION_BY_ZERO, Panic.UNDER_OVERFLOW));
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [high low].
            uint256 remainder;
            assembly ("memory-safe") {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                high := sub(high, gt(remainder, low))
                low := sub(low, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly ("memory-safe") {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [high low] by twos.
                low := div(low, twos)

                // Flip twos such that it is 2²⁵⁶ / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from high into low.
            low |= high * twos;

            // Invert denominator mod 2²⁵⁶. Now that denominator is an odd number, it has an inverse modulo 2²⁵⁶ such
            // that denominator * inv ≡ 1 mod 2²⁵⁶. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv ≡ 1 mod 2⁴.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2⁸
            inverse *= 2 - denominator * inverse; // inverse mod 2¹⁶
            inverse *= 2 - denominator * inverse; // inverse mod 2³²
            inverse *= 2 - denominator * inverse; // inverse mod 2⁶⁴
            inverse *= 2 - denominator * inverse; // inverse mod 2¹²⁸
            inverse *= 2 - denominator * inverse; // inverse mod 2²⁵⁶

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2²⁵⁶. Since the preconditions guarantee that the outcome is
            // less than 2²⁵⁶, this is the final result. We don't need to compute the high bits of the result and high
            // is no longer required.
            result = low * inverse;
            return result;
        }
    }

    /**
     * @dev Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        return mulDiv(x, y, denominator) + SafeCast.toUint(unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0);
    }

    /**
     * @dev Calculates floor(x * y >> n) with full precision. Throws if result overflows a uint256.
     */
    function mulShr(uint256 x, uint256 y, uint8 n) internal pure returns (uint256 result) {
        unchecked {
            (uint256 high, uint256 low) = mul512(x, y);
            if (high >= 1 << n) {
                Panic.panic(Panic.UNDER_OVERFLOW);
            }
            return (high << (256 - n)) | (low >> n);
        }
    }

    /**
     * @dev Calculates x * y >> n with full precision, following the selected rounding direction.
     */
    function mulShr(uint256 x, uint256 y, uint8 n, Rounding rounding) internal pure returns (uint256) {
        return mulShr(x, y, n) + SafeCast.toUint(unsignedRoundsUp(rounding) && mulmod(x, y, 1 << n) > 0);
    }

    /**
     * @dev Calculate the modular multiplicative inverse of a number in Z/nZ.
     *
     * If n is a prime, then Z/nZ is a field. In that case all elements are inversible, except 0.
     * If n is not a prime, then Z/nZ is not a field, and some elements might not be inversible.
     *
     * If the input value is not inversible, 0 is returned.
     *
     * NOTE: If you know for sure that n is (big) a prime, it may be cheaper to use Fermat's little theorem and get the
     * inverse using `Math.modExp(a, n - 2, n)`. See {invModPrime}.
     */
    function invMod(uint256 a, uint256 n) internal pure returns (uint256) {
        unchecked {
            if (n == 0) return 0;

            // The inverse modulo is calculated using the Extended Euclidean Algorithm (iterative version)
            // Used to compute integers x and y such that: ax + ny = gcd(a, n).
            // When the gcd is 1, then the inverse of a modulo n exists and it's x.
            // ax + ny = 1
            // ax = 1 + (-y)n
            // ax ≡ 1 (mod n) # x is the inverse of a modulo n

            // If the remainder is 0 the gcd is n right away.
            uint256 remainder = a % n;
            uint256 gcd = n;

            // Therefore the initial coefficients are:
            // ax + ny = gcd(a, n) = n
            // 0a + 1n = n
            int256 x = 0;
            int256 y = 1;

            while (remainder != 0) {
                uint256 quotient = gcd / remainder;

                (gcd, remainder) = (
                    // The old remainder is the next gcd to try.
                    remainder,
                    // Compute the next remainder.
                    // Can't overflow given that (a % gcd) * (gcd // (a % gcd)) <= gcd
                    // where gcd is at most n (capped to type(uint256).max)
                    gcd - remainder * quotient
                );

                (x, y) = (
                    // Increment the coefficient of a.
                    y,
                    // Decrement the coefficient of n.
                    // Can overflow, but the result is casted to uint256 so that the
                    // next value of y is "wrapped around" to a value between 0 and n - 1.
                    x - y * int256(quotient)
                );
            }

            if (gcd != 1) return 0; // No inverse exists.
            return ternary(x < 0, n - uint256(-x), uint256(x)); // Wrap the result if it's negative.
        }
    }

    /**
     * @dev Variant of {invMod}. More efficient, but only works if `p` is known to be a prime greater than `2`.
     *
     * From https://en.wikipedia.org/wiki/Fermat%27s_little_theorem[Fermat's little theorem], we know that if p is
     * prime, then `a**(p-1) ≡ 1 mod p`. As a consequence, we have `a * a**(p-2) ≡ 1 mod p`, which means that
     * `a**(p-2)` is the modular multiplicative inverse of a in Fp.
     *
     * NOTE: this function does NOT check that `p` is a prime greater than `2`.
     */
    function invModPrime(uint256 a, uint256 p) internal view returns (uint256) {
        unchecked {
            return Math.modExp(a, p - 2, p);
        }
    }

    /**
     * @dev Returns the modular exponentiation of the specified base, exponent and modulus (b ** e % m)
     *
     * Requirements:
     * - modulus can't be zero
     * - underlying staticcall to precompile must succeed
     *
     * IMPORTANT: The result is only valid if the underlying call succeeds. When using this function, make
     * sure the chain you're using it on supports the precompiled contract for modular exponentiation
     * at address 0x05 as specified in https://eips.ethereum.org/EIPS/eip-198[EIP-198]. Otherwise,
     * the underlying function will succeed given the lack of a revert, but the result may be incorrectly
     * interpreted as 0.
     */
    function modExp(uint256 b, uint256 e, uint256 m) internal view returns (uint256) {
        (bool success, uint256 result) = tryModExp(b, e, m);
        if (!success) {
            Panic.panic(Panic.DIVISION_BY_ZERO);
        }
        return result;
    }

    /**
     * @dev Returns the modular exponentiation of the specified base, exponent and modulus (b ** e % m).
     * It includes a success flag indicating if the operation succeeded. Operation will be marked as failed if trying
     * to operate modulo 0 or if the underlying precompile reverted.
     *
     * IMPORTANT: The result is only valid if the success flag is true. When using this function, make sure the chain
     * you're using it on supports the precompiled contract for modular exponentiation at address 0x05 as specified in
     * https://eips.ethereum.org/EIPS/eip-198[EIP-198]. Otherwise, the underlying function will succeed given the lack
     * of a revert, but the result may be incorrectly interpreted as 0.
     */
    function tryModExp(uint256 b, uint256 e, uint256 m) internal view returns (bool success, uint256 result) {
        if (m == 0) return (false, 0);
        assembly ("memory-safe") {
            let ptr := mload(0x40)
            // | Offset    | Content    | Content (Hex)                                                      |
            // |-----------|------------|--------------------------------------------------------------------|
            // | 0x00:0x1f | size of b  | 0x0000000000000000000000000000000000000000000000000000000000000020 |
            // | 0x20:0x3f | size of e  | 0x0000000000000000000000000000000000000000000000000000000000000020 |
            // | 0x40:0x5f | size of m  | 0x0000000000000000000000000000000000000000000000000000000000000020 |
            // | 0x60:0x7f | value of b | 0x<.............................................................b> |
            // | 0x80:0x9f | value of e | 0x<.............................................................e> |
            // | 0xa0:0xbf | value of m | 0x<.............................................................m> |
            mstore(ptr, 0x20)
            mstore(add(ptr, 0x20), 0x20)
            mstore(add(ptr, 0x40), 0x20)
            mstore(add(ptr, 0x60), b)
            mstore(add(ptr, 0x80), e)
            mstore(add(ptr, 0xa0), m)

            // Given the result < m, it's guaranteed to fit in 32 bytes,
            // so we can use the memory scratch space located at offset 0.
            success := staticcall(gas(), 0x05, ptr, 0xc0, 0x00, 0x20)
            result := mload(0x00)
        }
    }

    /**
     * @dev Variant of {modExp} that supports inputs of arbitrary length.
     */
    function modExp(bytes memory b, bytes memory e, bytes memory m) internal view returns (bytes memory) {
        (bool success, bytes memory result) = tryModExp(b, e, m);
        if (!success) {
            Panic.panic(Panic.DIVISION_BY_ZERO);
        }
        return result;
    }

    /**
     * @dev Variant of {tryModExp} that supports inputs of arbitrary length.
     */
    function tryModExp(
        bytes memory b,
        bytes memory e,
        bytes memory m
    ) internal view returns (bool success, bytes memory result) {
        if (_zeroBytes(m)) return (false, new bytes(0));

        uint256 mLen = m.length;

        // Encode call args in result and move the free memory pointer
        result = abi.encodePacked(b.length, e.length, mLen, b, e, m);

        assembly ("memory-safe") {
            let dataPtr := add(result, 0x20)
            // Write result on top of args to avoid allocating extra memory.
            success := staticcall(gas(), 0x05, dataPtr, mload(result), dataPtr, mLen)
            // Overwrite the length.
            // result.length > returndatasize() is guaranteed because returndatasize() == m.length
            mstore(result, mLen)
            // Set the memory pointer after the returned data.
            mstore(0x40, add(dataPtr, mLen))
        }
    }

    /**
     * @dev Returns whether the provided byte array is zero.
     */
    function _zeroBytes(bytes memory byteArray) private pure returns (bool) {
        for (uint256 i = 0; i < byteArray.length; ++i) {
            if (byteArray[i] != 0) {
                return false;
            }
        }
        return true;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * This method is based on Newton's method for computing square roots; the algorithm is restricted to only
     * using integer operations.
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        unchecked {
            // Take care of easy edge cases when a == 0 or a == 1
            if (a <= 1) {
                return a;
            }

            // In this function, we use Newton's method to get a root of `f(x) := x² - a`. It involves building a
            // sequence x_n that converges toward sqrt(a). For each iteration x_n, we also define the error between
            // the current value as `ε_n = | x_n - sqrt(a) |`.
            //
            // For our first estimation, we consider `e` the smallest power of 2 which is bigger than the square root
            // of the target. (i.e. `2**(e-1) ≤ sqrt(a) < 2**e`). We know that `e ≤ 128` because `(2¹²⁸)² = 2²⁵⁶` is
            // bigger than any uint256.
            //
            // By noticing that
            // `2**(e-1) ≤ sqrt(a) < 2**e → (2**(e-1))² ≤ a < (2**e)² → 2**(2*e-2) ≤ a < 2**(2*e)`
            // we can deduce that `e - 1` is `log2(a) / 2`. We can thus compute `x_n = 2**(e-1)` using a method similar
            // to the msb function.
            uint256 aa = a;
            uint256 xn = 1;

            if (aa >= (1 << 128)) {
                aa >>= 128;
                xn <<= 64;
            }
            if (aa >= (1 << 64)) {
                aa >>= 64;
                xn <<= 32;
            }
            if (aa >= (1 << 32)) {
                aa >>= 32;
                xn <<= 16;
            }
            if (aa >= (1 << 16)) {
                aa >>= 16;
                xn <<= 8;
            }
            if (aa >= (1 << 8)) {
                aa >>= 8;
                xn <<= 4;
            }
            if (aa >= (1 << 4)) {
                aa >>= 4;
                xn <<= 2;
            }
            if (aa >= (1 << 2)) {
                xn <<= 1;
            }

            // We now have x_n such that `x_n = 2**(e-1) ≤ sqrt(a) < 2**e = 2 * x_n`. This implies ε_n ≤ 2**(e-1).
            //
            // We can refine our estimation by noticing that the middle of that interval minimizes the error.
            // If we move x_n to equal 2**(e-1) + 2**(e-2), then we reduce the error to ε_n ≤ 2**(e-2).
            // This is going to be our x_0 (and ε_0)
            xn = (3 * xn) >> 1; // ε_0 := | x_0 - sqrt(a) | ≤ 2**(e-2)

            // From here, Newton's method give us:
            // x_{n+1} = (x_n + a / x_n) / 2
            //
            // One should note that:
            // x_{n+1}² - a = ((x_n + a / x_n) / 2)² - a
            //              = ((x_n² + a) / (2 * x_n))² - a
            //              = (x_n⁴ + 2 * a * x_n² + a²) / (4 * x_n²) - a
            //              = (x_n⁴ + 2 * a * x_n² + a² - 4 * a * x_n²) / (4 * x_n²)
            //              = (x_n⁴ - 2 * a * x_n² + a²) / (4 * x_n²)
            //              = (x_n² - a)² / (2 * x_n)²
            //              = ((x_n² - a) / (2 * x_n))²
            //              ≥ 0
            // Which proves that for all n ≥ 1, sqrt(a) ≤ x_n
            //
            // This gives us the proof of quadratic convergence of the sequence:
            // ε_{n+1} = | x_{n+1} - sqrt(a) |
            //         = | (x_n + a / x_n) / 2 - sqrt(a) |
            //         = | (x_n² + a - 2*x_n*sqrt(a)) / (2 * x_n) |
            //         = | (x_n - sqrt(a))² / (2 * x_n) |
            //         = | ε_n² / (2 * x_n) |
            //         = ε_n² / | (2 * x_n) |
            //
            // For the first iteration, we have a special case where x_0 is known:
            // ε_1 = ε_0² / | (2 * x_0) |
            //     ≤ (2**(e-2))² / (2 * (2**(e-1) + 2**(e-2)))
            //     ≤ 2**(2*e-4) / (3 * 2**(e-1))
            //     ≤ 2**(e-3) / 3
            //     ≤ 2**(e-3-log2(3))
            //     ≤ 2**(e-4.5)
            //
            // For the following iterations, we use the fact that, 2**(e-1) ≤ sqrt(a) ≤ x_n:
            // ε_{n+1} = ε_n² / | (2 * x_n) |
            //         ≤ (2**(e-k))² / (2 * 2**(e-1))
            //         ≤ 2**(2*e-2*k) / 2**e
            //         ≤ 2**(e-2*k)
            xn = (xn + a / xn) >> 1; // ε_1 := | x_1 - sqrt(a) | ≤ 2**(e-4.5)  -- special case, see above
            xn = (xn + a / xn) >> 1; // ε_2 := | x_2 - sqrt(a) | ≤ 2**(e-9)    -- general case with k = 4.5
            xn = (xn + a / xn) >> 1; // ε_3 := | x_3 - sqrt(a) | ≤ 2**(e-18)   -- general case with k = 9
            xn = (xn + a / xn) >> 1; // ε_4 := | x_4 - sqrt(a) | ≤ 2**(e-36)   -- general case with k = 18
            xn = (xn + a / xn) >> 1; // ε_5 := | x_5 - sqrt(a) | ≤ 2**(e-72)   -- general case with k = 36
            xn = (xn + a / xn) >> 1; // ε_6 := | x_6 - sqrt(a) | ≤ 2**(e-144)  -- general case with k = 72

            // Because e ≤ 128 (as discussed during the first estimation phase), we know have reached a precision
            // ε_6 ≤ 2**(e-144) < 1. Given we're operating on integers, then we can ensure that xn is now either
            // sqrt(a) or sqrt(a) + 1.
            return xn - SafeCast.toUint(xn > a / xn);
        }
    }

    /**
     * @dev Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && result * result < a);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 x) internal pure returns (uint256 r) {
        // If value has upper 128 bits set, log2 result is at least 128
        r = SafeCast.toUint(x > 0xffffffffffffffffffffffffffffffff) << 7;
        // If upper 64 bits of 128-bit half set, add 64 to result
        r |= SafeCast.toUint((x >> r) > 0xffffffffffffffff) << 6;
        // If upper 32 bits of 64-bit half set, add 32 to result
        r |= SafeCast.toUint((x >> r) > 0xffffffff) << 5;
        // If upper 16 bits of 32-bit half set, add 16 to result
        r |= SafeCast.toUint((x >> r) > 0xffff) << 4;
        // If upper 8 bits of 16-bit half set, add 8 to result
        r |= SafeCast.toUint((x >> r) > 0xff) << 3;
        // If upper 4 bits of 8-bit half set, add 4 to result
        r |= SafeCast.toUint((x >> r) > 0xf) << 2;

        // Shifts value right by the current result and use it as an index into this lookup table:
        //
        // | x (4 bits) |  index  | table[index] = MSB position |
        // |------------|---------|-----------------------------|
        // |    0000    |    0    |        table[0] = 0         |
        // |    0001    |    1    |        table[1] = 0         |
        // |    0010    |    2    |        table[2] = 1         |
        // |    0011    |    3    |        table[3] = 1         |
        // |    0100    |    4    |        table[4] = 2         |
        // |    0101    |    5    |        table[5] = 2         |
        // |    0110    |    6    |        table[6] = 2         |
        // |    0111    |    7    |        table[7] = 2         |
        // |    1000    |    8    |        table[8] = 3         |
        // |    1001    |    9    |        table[9] = 3         |
        // |    1010    |   10    |        table[10] = 3        |
        // |    1011    |   11    |        table[11] = 3        |
        // |    1100    |   12    |        table[12] = 3        |
        // |    1101    |   13    |        table[13] = 3        |
        // |    1110    |   14    |        table[14] = 3        |
        // |    1111    |   15    |        table[15] = 3        |
        //
        // The lookup table is represented as a 32-byte value with the MSB positions for 0-15 in the last 16 bytes.
        assembly ("memory-safe") {
            r := or(r, byte(shr(r, x), 0x0000010102020202030303030303030300000000000000000000000000000000))
        }
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 1 << result < value);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 10 ** result < value);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 x) internal pure returns (uint256 r) {
        // If value has upper 128 bits set, log2 result is at least 128
        r = SafeCast.toUint(x > 0xffffffffffffffffffffffffffffffff) << 7;
        // If upper 64 bits of 128-bit half set, add 64 to result
        r |= SafeCast.toUint((x >> r) > 0xffffffffffffffff) << 6;
        // If upper 32 bits of 64-bit half set, add 32 to result
        r |= SafeCast.toUint((x >> r) > 0xffffffff) << 5;
        // If upper 16 bits of 32-bit half set, add 16 to result
        r |= SafeCast.toUint((x >> r) > 0xffff) << 4;
        // Add 1 if upper 8 bits of 16-bit half set, and divide accumulated result by 8
        return (r >> 3) | SafeCast.toUint((x >> r) > 0xff);
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 1 << (result << 3) < value);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }

    /**
     * @dev Counts the number of leading zero bits in a uint256.
     */
    function clz(uint256 x) internal pure returns (uint256) {
        return ternary(x == 0, 256, 255 - log2(x));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/math/SafeCast.sol)
// This file was procedurally generated from scripts/generate/templates/SafeCast.js.

pragma solidity ^0.8.20;

/**
 * @dev Wrappers over Solidity's uintXX/intXX/bool casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeCast {
    /**
     * @dev Value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedUintDowncast(uint8 bits, uint256 value);

    /**
     * @dev An int value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedIntToUint(int256 value);

    /**
     * @dev Value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedIntDowncast(uint8 bits, int256 value);

    /**
     * @dev An uint value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedUintToInt(uint256 value);

    /**
     * @dev Returns the downcasted uint248 from uint256, reverting on
     * overflow (when the input is greater than largest uint248).
     *
     * Counterpart to Solidity's `uint248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toUint248(uint256 value) internal pure returns (uint248) {
        if (value > type(uint248).max) {
            revert SafeCastOverflowedUintDowncast(248, value);
        }
        return uint248(value);
    }

    /**
     * @dev Returns the downcasted uint240 from uint256, reverting on
     * overflow (when the input is greater than largest uint240).
     *
     * Counterpart to Solidity's `uint240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toUint240(uint256 value) internal pure returns (uint240) {
        if (value > type(uint240).max) {
            revert SafeCastOverflowedUintDowncast(240, value);
        }
        return uint240(value);
    }

    /**
     * @dev Returns the downcasted uint232 from uint256, reverting on
     * overflow (when the input is greater than largest uint232).
     *
     * Counterpart to Solidity's `uint232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toUint232(uint256 value) internal pure returns (uint232) {
        if (value > type(uint232).max) {
            revert SafeCastOverflowedUintDowncast(232, value);
        }
        return uint232(value);
    }

    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        if (value > type(uint224).max) {
            revert SafeCastOverflowedUintDowncast(224, value);
        }
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint216 from uint256, reverting on
     * overflow (when the input is greater than largest uint216).
     *
     * Counterpart to Solidity's `uint216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toUint216(uint256 value) internal pure returns (uint216) {
        if (value > type(uint216).max) {
            revert SafeCastOverflowedUintDowncast(216, value);
        }
        return uint216(value);
    }

    /**
     * @dev Returns the downcasted uint208 from uint256, reverting on
     * overflow (when the input is greater than largest uint208).
     *
     * Counterpart to Solidity's `uint208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toUint208(uint256 value) internal pure returns (uint208) {
        if (value > type(uint208).max) {
            revert SafeCastOverflowedUintDowncast(208, value);
        }
        return uint208(value);
    }

    /**
     * @dev Returns the downcasted uint200 from uint256, reverting on
     * overflow (when the input is greater than largest uint200).
     *
     * Counterpart to Solidity's `uint200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toUint200(uint256 value) internal pure returns (uint200) {
        if (value > type(uint200).max) {
            revert SafeCastOverflowedUintDowncast(200, value);
        }
        return uint200(value);
    }

    /**
     * @dev Returns the downcasted uint192 from uint256, reverting on
     * overflow (when the input is greater than largest uint192).
     *
     * Counterpart to Solidity's `uint192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toUint192(uint256 value) internal pure returns (uint192) {
        if (value > type(uint192).max) {
            revert SafeCastOverflowedUintDowncast(192, value);
        }
        return uint192(value);
    }

    /**
     * @dev Returns the downcasted uint184 from uint256, reverting on
     * overflow (when the input is greater than largest uint184).
     *
     * Counterpart to Solidity's `uint184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toUint184(uint256 value) internal pure returns (uint184) {
        if (value > type(uint184).max) {
            revert SafeCastOverflowedUintDowncast(184, value);
        }
        return uint184(value);
    }

    /**
     * @dev Returns the downcasted uint176 from uint256, reverting on
     * overflow (when the input is greater than largest uint176).
     *
     * Counterpart to Solidity's `uint176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toUint176(uint256 value) internal pure returns (uint176) {
        if (value > type(uint176).max) {
            revert SafeCastOverflowedUintDowncast(176, value);
        }
        return uint176(value);
    }

    /**
     * @dev Returns the downcasted uint168 from uint256, reverting on
     * overflow (when the input is greater than largest uint168).
     *
     * Counterpart to Solidity's `uint168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toUint168(uint256 value) internal pure returns (uint168) {
        if (value > type(uint168).max) {
            revert SafeCastOverflowedUintDowncast(168, value);
        }
        return uint168(value);
    }

    /**
     * @dev Returns the downcasted uint160 from uint256, reverting on
     * overflow (when the input is greater than largest uint160).
     *
     * Counterpart to Solidity's `uint160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toUint160(uint256 value) internal pure returns (uint160) {
        if (value > type(uint160).max) {
            revert SafeCastOverflowedUintDowncast(160, value);
        }
        return uint160(value);
    }

    /**
     * @dev Returns the downcasted uint152 from uint256, reverting on
     * overflow (when the input is greater than largest uint152).
     *
     * Counterpart to Solidity's `uint152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toUint152(uint256 value) internal pure returns (uint152) {
        if (value > type(uint152).max) {
            revert SafeCastOverflowedUintDowncast(152, value);
        }
        return uint152(value);
    }

    /**
     * @dev Returns the downcasted uint144 from uint256, reverting on
     * overflow (when the input is greater than largest uint144).
     *
     * Counterpart to Solidity's `uint144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     */
    function toUint144(uint256 value) internal pure returns (uint144) {
        if (value > type(uint144).max) {
            revert SafeCastOverflowedUintDowncast(144, value);
        }
        return uint144(value);
    }

    /**
     * @dev Returns the downcasted uint136 from uint256, reverting on
     * overflow (when the input is greater than largest uint136).
     *
     * Counterpart to Solidity's `uint136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     */
    function toUint136(uint256 value) internal pure returns (uint136) {
        if (value > type(uint136).max) {
            revert SafeCastOverflowedUintDowncast(136, value);
        }
        return uint136(value);
    }

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        if (value > type(uint128).max) {
            revert SafeCastOverflowedUintDowncast(128, value);
        }
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint120 from uint256, reverting on
     * overflow (when the input is greater than largest uint120).
     *
     * Counterpart to Solidity's `uint120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     */
    function toUint120(uint256 value) internal pure returns (uint120) {
        if (value > type(uint120).max) {
            revert SafeCastOverflowedUintDowncast(120, value);
        }
        return uint120(value);
    }

    /**
     * @dev Returns the downcasted uint112 from uint256, reverting on
     * overflow (when the input is greater than largest uint112).
     *
     * Counterpart to Solidity's `uint112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     */
    function toUint112(uint256 value) internal pure returns (uint112) {
        if (value > type(uint112).max) {
            revert SafeCastOverflowedUintDowncast(112, value);
        }
        return uint112(value);
    }

    /**
     * @dev Returns the downcasted uint104 from uint256, reverting on
     * overflow (when the input is greater than largest uint104).
     *
     * Counterpart to Solidity's `uint104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     */
    function toUint104(uint256 value) internal pure returns (uint104) {
        if (value > type(uint104).max) {
            revert SafeCastOverflowedUintDowncast(104, value);
        }
        return uint104(value);
    }

    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        if (value > type(uint96).max) {
            revert SafeCastOverflowedUintDowncast(96, value);
        }
        return uint96(value);
    }

    /**
     * @dev Returns the downcasted uint88 from uint256, reverting on
     * overflow (when the input is greater than largest uint88).
     *
     * Counterpart to Solidity's `uint88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     */
    function toUint88(uint256 value) internal pure returns (uint88) {
        if (value > type(uint88).max) {
            revert SafeCastOverflowedUintDowncast(88, value);
        }
        return uint88(value);
    }

    /**
     * @dev Returns the downcasted uint80 from uint256, reverting on
     * overflow (when the input is greater than largest uint80).
     *
     * Counterpart to Solidity's `uint80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     */
    function toUint80(uint256 value) internal pure returns (uint80) {
        if (value > type(uint80).max) {
            revert SafeCastOverflowedUintDowncast(80, value);
        }
        return uint80(value);
    }

    /**
     * @dev Returns the downcasted uint72 from uint256, reverting on
     * overflow (when the input is greater than largest uint72).
     *
     * Counterpart to Solidity's `uint72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     */
    function toUint72(uint256 value) internal pure returns (uint72) {
        if (value > type(uint72).max) {
            revert SafeCastOverflowedUintDowncast(72, value);
        }
        return uint72(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        if (value > type(uint64).max) {
            revert SafeCastOverflowedUintDowncast(64, value);
        }
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint56 from uint256, reverting on
     * overflow (when the input is greater than largest uint56).
     *
     * Counterpart to Solidity's `uint56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     */
    function toUint56(uint256 value) internal pure returns (uint56) {
        if (value > type(uint56).max) {
            revert SafeCastOverflowedUintDowncast(56, value);
        }
        return uint56(value);
    }

    /**
     * @dev Returns the downcasted uint48 from uint256, reverting on
     * overflow (when the input is greater than largest uint48).
     *
     * Counterpart to Solidity's `uint48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     */
    function toUint48(uint256 value) internal pure returns (uint48) {
        if (value > type(uint48).max) {
            revert SafeCastOverflowedUintDowncast(48, value);
        }
        return uint48(value);
    }

    /**
     * @dev Returns the downcasted uint40 from uint256, reverting on
     * overflow (when the input is greater than largest uint40).
     *
     * Counterpart to Solidity's `uint40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     */
    function toUint40(uint256 value) internal pure returns (uint40) {
        if (value > type(uint40).max) {
            revert SafeCastOverflowedUintDowncast(40, value);
        }
        return uint40(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        if (value > type(uint32).max) {
            revert SafeCastOverflowedUintDowncast(32, value);
        }
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint24 from uint256, reverting on
     * overflow (when the input is greater than largest uint24).
     *
     * Counterpart to Solidity's `uint24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     */
    function toUint24(uint256 value) internal pure returns (uint24) {
        if (value > type(uint24).max) {
            revert SafeCastOverflowedUintDowncast(24, value);
        }
        return uint24(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        if (value > type(uint16).max) {
            revert SafeCastOverflowedUintDowncast(16, value);
        }
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        if (value > type(uint8).max) {
            revert SafeCastOverflowedUintDowncast(8, value);
        }
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        if (value < 0) {
            revert SafeCastOverflowedIntToUint(value);
        }
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int248 from int256, reverting on
     * overflow (when the input is less than smallest int248 or
     * greater than largest int248).
     *
     * Counterpart to Solidity's `int248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toInt248(int256 value) internal pure returns (int248 downcasted) {
        downcasted = int248(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(248, value);
        }
    }

    /**
     * @dev Returns the downcasted int240 from int256, reverting on
     * overflow (when the input is less than smallest int240 or
     * greater than largest int240).
     *
     * Counterpart to Solidity's `int240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toInt240(int256 value) internal pure returns (int240 downcasted) {
        downcasted = int240(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(240, value);
        }
    }

    /**
     * @dev Returns the downcasted int232 from int256, reverting on
     * overflow (when the input is less than smallest int232 or
     * greater than largest int232).
     *
     * Counterpart to Solidity's `int232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toInt232(int256 value) internal pure returns (int232 downcasted) {
        downcasted = int232(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(232, value);
        }
    }

    /**
     * @dev Returns the downcasted int224 from int256, reverting on
     * overflow (when the input is less than smallest int224 or
     * greater than largest int224).
     *
     * Counterpart to Solidity's `int224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toInt224(int256 value) internal pure returns (int224 downcasted) {
        downcasted = int224(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(224, value);
        }
    }

    /**
     * @dev Returns the downcasted int216 from int256, reverting on
     * overflow (when the input is less than smallest int216 or
     * greater than largest int216).
     *
     * Counterpart to Solidity's `int216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toInt216(int256 value) internal pure returns (int216 downcasted) {
        downcasted = int216(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(216, value);
        }
    }

    /**
     * @dev Returns the downcasted int208 from int256, reverting on
     * overflow (when the input is less than smallest int208 or
     * greater than largest int208).
     *
     * Counterpart to Solidity's `int208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toInt208(int256 value) internal pure returns (int208 downcasted) {
        downcasted = int208(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(208, value);
        }
    }

    /**
     * @dev Returns the downcasted int200 from int256, reverting on
     * overflow (when the input is less than smallest int200 or
     * greater than largest int200).
     *
     * Counterpart to Solidity's `int200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toInt200(int256 value) internal pure returns (int200 downcasted) {
        downcasted = int200(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(200, value);
        }
    }

    /**
     * @dev Returns the downcasted int192 from int256, reverting on
     * overflow (when the input is less than smallest int192 or
     * greater than largest int192).
     *
     * Counterpart to Solidity's `int192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toInt192(int256 value) internal pure returns (int192 downcasted) {
        downcasted = int192(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(192, value);
        }
    }

    /**
     * @dev Returns the downcasted int184 from int256, reverting on
     * overflow (when the input is less than smallest int184 or
     * greater than largest int184).
     *
     * Counterpart to Solidity's `int184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toInt184(int256 value) internal pure returns (int184 downcasted) {
        downcasted = int184(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(184, value);
        }
    }

    /**
     * @dev Returns the downcasted int176 from int256, reverting on
     * overflow (when the input is less than smallest int176 or
     * greater than largest int176).
     *
     * Counterpart to Solidity's `int176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toInt176(int256 value) internal pure returns (int176 downcasted) {
        downcasted = int176(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(176, value);
        }
    }

    /**
     * @dev Returns the downcasted int168 from int256, reverting on
     * overflow (when the input is less than smallest int168 or
     * greater than largest int168).
     *
     * Counterpart to Solidity's `int168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toInt168(int256 value) internal pure returns (int168 downcasted) {
        downcasted = int168(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(168, value);
        }
    }

    /**
     * @dev Returns the downcasted int160 from int256, reverting on
     * overflow (when the input is less than smallest int160 or
     * greater than largest int160).
     *
     * Counterpart to Solidity's `int160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toInt160(int256 value) internal pure returns (int160 downcasted) {
        downcasted = int160(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(160, value);
        }
    }

    /**
     * @dev Returns the downcasted int152 from int256, reverting on
     * overflow (when the input is less than smallest int152 or
     * greater than largest int152).
     *
     * Counterpart to Solidity's `int152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toInt152(int256 value) internal pure returns (int152 downcasted) {
        downcasted = int152(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(152, value);
        }
    }

    /**
     * @dev Returns the downcasted int144 from int256, reverting on
     * overflow (when the input is less than smallest int144 or
     * greater than largest int144).
     *
     * Counterpart to Solidity's `int144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     */
    function toInt144(int256 value) internal pure returns (int144 downcasted) {
        downcasted = int144(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(144, value);
        }
    }

    /**
     * @dev Returns the downcasted int136 from int256, reverting on
     * overflow (when the input is less than smallest int136 or
     * greater than largest int136).
     *
     * Counterpart to Solidity's `int136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     */
    function toInt136(int256 value) internal pure returns (int136 downcasted) {
        downcasted = int136(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(136, value);
        }
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toInt128(int256 value) internal pure returns (int128 downcasted) {
        downcasted = int128(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(128, value);
        }
    }

    /**
     * @dev Returns the downcasted int120 from int256, reverting on
     * overflow (when the input is less than smallest int120 or
     * greater than largest int120).
     *
     * Counterpart to Solidity's `int120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     */
    function toInt120(int256 value) internal pure returns (int120 downcasted) {
        downcasted = int120(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(120, value);
        }
    }

    /**
     * @dev Returns the downcasted int112 from int256, reverting on
     * overflow (when the input is less than smallest int112 or
     * greater than largest int112).
     *
     * Counterpart to Solidity's `int112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     */
    function toInt112(int256 value) internal pure returns (int112 downcasted) {
        downcasted = int112(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(112, value);
        }
    }

    /**
     * @dev Returns the downcasted int104 from int256, reverting on
     * overflow (when the input is less than smallest int104 or
     * greater than largest int104).
     *
     * Counterpart to Solidity's `int104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     */
    function toInt104(int256 value) internal pure returns (int104 downcasted) {
        downcasted = int104(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(104, value);
        }
    }

    /**
     * @dev Returns the downcasted int96 from int256, reverting on
     * overflow (when the input is less than smallest int96 or
     * greater than largest int96).
     *
     * Counterpart to Solidity's `int96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toInt96(int256 value) internal pure returns (int96 downcasted) {
        downcasted = int96(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(96, value);
        }
    }

    /**
     * @dev Returns the downcasted int88 from int256, reverting on
     * overflow (when the input is less than smallest int88 or
     * greater than largest int88).
     *
     * Counterpart to Solidity's `int88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     */
    function toInt88(int256 value) internal pure returns (int88 downcasted) {
        downcasted = int88(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(88, value);
        }
    }

    /**
     * @dev Returns the downcasted int80 from int256, reverting on
     * overflow (when the input is less than smallest int80 or
     * greater than largest int80).
     *
     * Counterpart to Solidity's `int80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     */
    function toInt80(int256 value) internal pure returns (int80 downcasted) {
        downcasted = int80(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(80, value);
        }
    }

    /**
     * @dev Returns the downcasted int72 from int256, reverting on
     * overflow (when the input is less than smallest int72 or
     * greater than largest int72).
     *
     * Counterpart to Solidity's `int72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     */
    function toInt72(int256 value) internal pure returns (int72 downcasted) {
        downcasted = int72(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(72, value);
        }
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toInt64(int256 value) internal pure returns (int64 downcasted) {
        downcasted = int64(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(64, value);
        }
    }

    /**
     * @dev Returns the downcasted int56 from int256, reverting on
     * overflow (when the input is less than smallest int56 or
     * greater than largest int56).
     *
     * Counterpart to Solidity's `int56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     */
    function toInt56(int256 value) internal pure returns (int56 downcasted) {
        downcasted = int56(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(56, value);
        }
    }

    /**
     * @dev Returns the downcasted int48 from int256, reverting on
     * overflow (when the input is less than smallest int48 or
     * greater than largest int48).
     *
     * Counterpart to Solidity's `int48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     */
    function toInt48(int256 value) internal pure returns (int48 downcasted) {
        downcasted = int48(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(48, value);
        }
    }

    /**
     * @dev Returns the downcasted int40 from int256, reverting on
     * overflow (when the input is less than smallest int40 or
     * greater than largest int40).
     *
     * Counterpart to Solidity's `int40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     */
    function toInt40(int256 value) internal pure returns (int40 downcasted) {
        downcasted = int40(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(40, value);
        }
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toInt32(int256 value) internal pure returns (int32 downcasted) {
        downcasted = int32(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(32, value);
        }
    }

    /**
     * @dev Returns the downcasted int24 from int256, reverting on
     * overflow (when the input is less than smallest int24 or
     * greater than largest int24).
     *
     * Counterpart to Solidity's `int24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     */
    function toInt24(int256 value) internal pure returns (int24 downcasted) {
        downcasted = int24(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(24, value);
        }
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toInt16(int256 value) internal pure returns (int16 downcasted) {
        downcasted = int16(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(16, value);
        }
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     */
    function toInt8(int256 value) internal pure returns (int8 downcasted) {
        downcasted = int8(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(8, value);
        }
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        if (value > uint256(type(int256).max)) {
            revert SafeCastOverflowedUintToInt(value);
        }
        return int256(value);
    }

    /**
     * @dev Cast a boolean (false or true) to a uint256 (0 or 1) with no jump.
     */
    function toUint(bool b) internal pure returns (uint256 u) {
        assembly ("memory-safe") {
            u := iszero(iszero(b))
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.20;

import {SafeCast} from "./SafeCast.sol";

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Branchless ternary evaluation for `a ? b : c`. Gas costs are constant.
     *
     * IMPORTANT: This function may reduce bytecode size and consume less gas when used standalone.
     * However, the compiler may optimize Solidity ternary operations (i.e. `a ? b : c`) to only compute
     * one branch when needed, making this function more expensive.
     */
    function ternary(bool condition, int256 a, int256 b) internal pure returns (int256) {
        unchecked {
            // branchless ternary works because:
            // b ^ (a ^ b) == a
            // b ^ 0 == b
            return b ^ ((a ^ b) * int256(SafeCast.toUint(condition)));
        }
    }

    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return ternary(a > b, a, b);
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return ternary(a < b, a, b);
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // Formula from the "Bit Twiddling Hacks" by Sean Eron Anderson.
            // Since `n` is a signed integer, the generated bytecode will use the SAR opcode to perform the right shift,
            // taking advantage of the most significant (or "sign" bit) in two's complement representation.
            // This opcode adds new most significant bits set to the value of the previous most significant bit. As a result,
            // the mask will either be `bytes32(0)` (if n is positive) or `~bytes32(0)` (if n is negative).
            int256 mask = n >> 255;

            // A `bytes32(0)` mask leaves the input unchanged, while a `~bytes32(0)` mask complements it.
            return uint256((n + mask) ^ mask);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.5.0) (utils/Bytes.sol)

pragma solidity ^0.8.24;

import {Math} from "./math/Math.sol";

/**
 * @dev Bytes operations.
 */
library Bytes {
    /**
     * @dev Forward search for `s` in `buffer`
     * * If `s` is present in the buffer, returns the index of the first instance
     * * If `s` is not present in the buffer, returns type(uint256).max
     *
     * NOTE: replicates the behavior of https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/indexOf[Javascript's `Array.indexOf`]
     */
    function indexOf(bytes memory buffer, bytes1 s) internal pure returns (uint256) {
        return indexOf(buffer, s, 0);
    }

    /**
     * @dev Forward search for `s` in `buffer` starting at position `pos`
     * * If `s` is present in the buffer (at or after `pos`), returns the index of the next instance
     * * If `s` is not present in the buffer (at or after `pos`), returns type(uint256).max
     *
     * NOTE: replicates the behavior of https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/indexOf[Javascript's `Array.indexOf`]
     */
    function indexOf(bytes memory buffer, bytes1 s, uint256 pos) internal pure returns (uint256) {
        uint256 length = buffer.length;
        for (uint256 i = pos; i < length; ++i) {
            if (bytes1(_unsafeReadBytesOffset(buffer, i)) == s) {
                return i;
            }
        }
        return type(uint256).max;
    }

    /**
     * @dev Backward search for `s` in `buffer`
     * * If `s` is present in the buffer, returns the index of the last instance
     * * If `s` is not present in the buffer, returns type(uint256).max
     *
     * NOTE: replicates the behavior of https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/lastIndexOf[Javascript's `Array.lastIndexOf`]
     */
    function lastIndexOf(bytes memory buffer, bytes1 s) internal pure returns (uint256) {
        return lastIndexOf(buffer, s, type(uint256).max);
    }

    /**
     * @dev Backward search for `s` in `buffer` starting at position `pos`
     * * If `s` is present in the buffer (at or before `pos`), returns the index of the previous instance
     * * If `s` is not present in the buffer (at or before `pos`), returns type(uint256).max
     *
     * NOTE: replicates the behavior of https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/lastIndexOf[Javascript's `Array.lastIndexOf`]
     */
    function lastIndexOf(bytes memory buffer, bytes1 s, uint256 pos) internal pure returns (uint256) {
        unchecked {
            uint256 length = buffer.length;
            for (uint256 i = Math.min(Math.saturatingAdd(pos, 1), length); i > 0; --i) {
                if (bytes1(_unsafeReadBytesOffset(buffer, i - 1)) == s) {
                    return i - 1;
                }
            }
            return type(uint256).max;
        }
    }

    /**
     * @dev Copies the content of `buffer`, from `start` (included) to the end of `buffer` into a new bytes object in
     * memory.
     *
     * NOTE: replicates the behavior of https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/slice[Javascript's `Array.slice`]
     */
    function slice(bytes memory buffer, uint256 start) internal pure returns (bytes memory) {
        return slice(buffer, start, buffer.length);
    }

    /**
     * @dev Copies the content of `buffer`, from `start` (included) to `end` (excluded) into a new bytes object in
     * memory. The `end` argument is truncated to the length of the `buffer`.
     *
     * NOTE: replicates the behavior of https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/slice[Javascript's `Array.slice`]
     */
    function slice(bytes memory buffer, uint256 start, uint256 end) internal pure returns (bytes memory) {
        // sanitize
        end = Math.min(end, buffer.length);
        start = Math.min(start, end);

        // allocate and copy
        bytes memory result = new bytes(end - start);
        assembly ("memory-safe") {
            mcopy(add(result, 0x20), add(add(buffer, 0x20), start), sub(end, start))
        }

        return result;
    }

    /**
     * @dev Moves the content of `buffer`, from `start` (included) to the end of `buffer` to the start of that buffer.
     *
     * NOTE: This function modifies the provided buffer in place. If you need to preserve the original buffer, use {slice} instead
     * NOTE: replicates the behavior of https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/splice[Javascript's `Array.splice`]
     */
    function splice(bytes memory buffer, uint256 start) internal pure returns (bytes memory) {
        return splice(buffer, start, buffer.length);
    }

    /**
     * @dev Moves the content of `buffer`, from `start` (included) to end (excluded) to the start of that buffer. The
     * `end` argument is truncated to the length of the `buffer`.
     *
     * NOTE: This function modifies the provided buffer in place. If you need to preserve the original buffer, use {slice} instead
     * NOTE: replicates the behavior of https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/splice[Javascript's `Array.splice`]
     */
    function splice(bytes memory buffer, uint256 start, uint256 end) internal pure returns (bytes memory) {
        // sanitize
        end = Math.min(end, buffer.length);
        start = Math.min(start, end);

        // allocate and copy
        assembly ("memory-safe") {
            mcopy(add(buffer, 0x20), add(add(buffer, 0x20), start), sub(end, start))
            mstore(buffer, sub(end, start))
        }

        return buffer;
    }

    /**
     * @dev Concatenate an array of bytes into a single bytes object.
     *
     * For fixed bytes types, we recommend using the solidity built-in `bytes.concat` or (equivalent)
     * `abi.encodePacked`.
     *
     * NOTE: this could be done in assembly with a single loop that expands starting at the FMP, but that would be
     * significantly less readable. It might be worth benchmarking the savings of the full-assembly approach.
     */
    function concat(bytes[] memory buffers) internal pure returns (bytes memory) {
        uint256 length = 0;
        for (uint256 i = 0; i < buffers.length; ++i) {
            length += buffers[i].length;
        }

        bytes memory result = new bytes(length);

        uint256 offset = 0x20;
        for (uint256 i = 0; i < buffers.length; ++i) {
            bytes memory input = buffers[i];
            assembly ("memory-safe") {
                mcopy(add(result, offset), add(input, 0x20), mload(input))
            }
            unchecked {
                offset += input.length;
            }
        }

        return result;
    }

    /**
     * @dev Returns true if the two byte buffers are equal.
     */
    function equal(bytes memory a, bytes memory b) internal pure returns (bool) {
        return a.length == b.length && keccak256(a) == keccak256(b);
    }

    /**
     * @dev Reverses the byte order of a bytes32 value, converting between little-endian and big-endian.
     * Inspired by https://graphics.stanford.edu/~seander/bithacks.html#ReverseParallel[Reverse Parallel]
     */
    function reverseBytes32(bytes32 value) internal pure returns (bytes32) {
        value = // swap bytes
            ((value >> 8) & 0x00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF) |
            ((value & 0x00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF) << 8);
        value = // swap 2-byte long pairs
            ((value >> 16) & 0x0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF) |
            ((value & 0x0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF) << 16);
        value = // swap 4-byte long pairs
            ((value >> 32) & 0x00000000FFFFFFFF00000000FFFFFFFF00000000FFFFFFFF00000000FFFFFFFF) |
            ((value & 0x00000000FFFFFFFF00000000FFFFFFFF00000000FFFFFFFF00000000FFFFFFFF) << 32);
        value = // swap 8-byte long pairs
            ((value >> 64) & 0x0000000000000000FFFFFFFFFFFFFFFF0000000000000000FFFFFFFFFFFFFFFF) |
            ((value & 0x0000000000000000FFFFFFFFFFFFFFFF0000000000000000FFFFFFFFFFFFFFFF) << 64);
        return (value >> 128) | (value << 128); // swap 16-byte long pairs
    }

    /// @dev Same as {reverseBytes32} but optimized for 128-bit values.
    function reverseBytes16(bytes16 value) internal pure returns (bytes16) {
        value = // swap bytes
            ((value & 0xFF00FF00FF00FF00FF00FF00FF00FF00) >> 8) |
            ((value & 0x00FF00FF00FF00FF00FF00FF00FF00FF) << 8);
        value = // swap 2-byte long pairs
            ((value & 0xFFFF0000FFFF0000FFFF0000FFFF0000) >> 16) |
            ((value & 0x0000FFFF0000FFFF0000FFFF0000FFFF) << 16);
        value = // swap 4-byte long pairs
            ((value & 0xFFFFFFFF00000000FFFFFFFF00000000) >> 32) |
            ((value & 0x00000000FFFFFFFF00000000FFFFFFFF) << 32);
        return (value >> 64) | (value << 64); // swap 8-byte long pairs
    }

    /// @dev Same as {reverseBytes32} but optimized for 64-bit values.
    function reverseBytes8(bytes8 value) internal pure returns (bytes8) {
        value = ((value & 0xFF00FF00FF00FF00) >> 8) | ((value & 0x00FF00FF00FF00FF) << 8); // swap bytes
        value = ((value & 0xFFFF0000FFFF0000) >> 16) | ((value & 0x0000FFFF0000FFFF) << 16); // swap 2-byte long pairs
        return (value >> 32) | (value << 32); // swap 4-byte long pairs
    }

    /// @dev Same as {reverseBytes32} but optimized for 32-bit values.
    function reverseBytes4(bytes4 value) internal pure returns (bytes4) {
        value = ((value & 0xFF00FF00) >> 8) | ((value & 0x00FF00FF) << 8); // swap bytes
        return (value >> 16) | (value << 16); // swap 2-byte long pairs
    }

    /// @dev Same as {reverseBytes32} but optimized for 16-bit values.
    function reverseBytes2(bytes2 value) internal pure returns (bytes2) {
        return (value >> 8) | (value << 8);
    }

    /**
     * @dev Counts the number of leading zero bits a bytes array. Returns `8 * buffer.length`
     * if the buffer is all zeros.
     */
    function clz(bytes memory buffer) internal pure returns (uint256) {
        for (uint256 i = 0; i < buffer.length; i += 0x20) {
            bytes32 chunk = _unsafeReadBytesOffset(buffer, i);
            if (chunk != bytes32(0)) {
                return Math.min(8 * i + Math.clz(uint256(chunk)), 8 * buffer.length);
            }
        }
        return 8 * buffer.length;
    }

    /**
     * @dev Reads a bytes32 from a bytes array without bounds checking.
     *
     * NOTE: making this function internal would mean it could be used with memory unsafe offset, and marking the
     * assembly block as such would prevent some optimizations.
     */
    function _unsafeReadBytesOffset(bytes memory buffer, uint256 offset) private pure returns (bytes32 value) {
        // This is not memory safe in the general case, but all calls to this private function are within bounds.
        assembly ("memory-safe") {
            value := mload(add(add(buffer, 0x20), offset))
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/Panic.sol)

pragma solidity ^0.8.20;

/**
 * @dev Helper library for emitting standardized panic codes.
 *
 * ```solidity
 * contract Example {
 *      using Panic for uint256;
 *
 *      // Use any of the declared internal constants
 *      function foo() { Panic.GENERIC.panic(); }
 *
 *      // Alternatively
 *      function foo() { Panic.panic(Panic.GENERIC); }
 * }
 * ```
 *
 * Follows the list from https://github.com/ethereum/solidity/blob/v0.8.24/libsolutil/ErrorCodes.h[libsolutil].
 *
 * _Available since v5.1._
 */
// slither-disable-next-line unused-state
library Panic {
    /// @dev generic / unspecified error
    uint256 internal constant GENERIC = 0x00;
    /// @dev used by the assert() builtin
    uint256 internal constant ASSERT = 0x01;
    /// @dev arithmetic underflow or overflow
    uint256 internal constant UNDER_OVERFLOW = 0x11;
    /// @dev division or modulo by zero
    uint256 internal constant DIVISION_BY_ZERO = 0x12;
    /// @dev enum conversion error
    uint256 internal constant ENUM_CONVERSION_ERROR = 0x21;
    /// @dev invalid encoding in storage
    uint256 internal constant STORAGE_ENCODING_ERROR = 0x22;
    /// @dev empty array pop
    uint256 internal constant EMPTY_ARRAY_POP = 0x31;
    /// @dev array out of bounds access
    uint256 internal constant ARRAY_OUT_OF_BOUNDS = 0x32;
    /// @dev resource error (too large allocation or too large array)
    uint256 internal constant RESOURCE_ERROR = 0x41;
    /// @dev calling invalid internal function
    uint256 internal constant INVALID_INTERNAL_FUNCTION = 0x51;

    /// @dev Reverts with a panic code. Recommended to use with
    /// the internal constants with predefined codes.
    function panic(uint256 code) internal pure {
        assembly ("memory-safe") {
            mstore(0x00, 0x4e487b71)
            mstore(0x20, code)
            revert(0x1c, 0x24)
        }
    }
}

{
  "remappings": [
    "@openzeppelin/contracts/=lib/openzeppelin-contracts/contracts/",
    "erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
    "forge-std/=lib/forge-std/src/",
    "halmos-cheatcodes/=lib/openzeppelin-contracts/lib/halmos-cheatcodes/src/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/",
    "solady/=lib/solady/src/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "cancun",
  "viaIR": true
}

[{"inputs":[{"internalType":"address","name":"_badgerBoxes","type":"address"},{"internalType":"address","name":"_moneyBadgers","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"AlreadyInitialized","type":"error"},{"inputs":[],"name":"BadgerBoxNotOwned","type":"error"},{"inputs":[],"name":"InvalidInitialization","type":"error"},{"inputs":[],"name":"InvalidTokenId","type":"error"},{"inputs":[],"name":"NewOwnerIsZeroAddress","type":"error"},{"inputs":[],"name":"NoHandoverRequest","type":"error"},{"inputs":[],"name":"NotInitializing","type":"error"},{"inputs":[],"name":"Unauthorized","type":"error"},{"inputs":[],"name":"UnauthorizedCallContext","type":"error"},{"inputs":[],"name":"UpgradeFailed","type":"error"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint64","name":"version","type":"uint64"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"pendingOwner","type":"address"}],"name":"OwnershipHandoverCanceled","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"pendingOwner","type":"address"}],"name":"OwnershipHandoverRequested","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"oldOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"implementation","type":"address"}],"name":"Upgraded","type":"event"},{"inputs":[],"name":"BADGERBOXES","outputs":[{"internalType":"contract BadgerBoxes","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MONEYBADGERS","outputs":[{"internalType":"contract MoneyBadgers","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"badgerBoxBurned","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"badgerBoxTokenId","type":"uint256"}],"name":"burnAndMint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"cancelOwnershipHandover","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"pendingOwner","type":"address"}],"name":"completeOwnershipHandover","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"_owner","type":"address"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"result","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"pendingOwner","type":"address"}],"name":"ownershipHandoverExpiresAt","outputs":[{"internalType":"uint256","name":"result","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"proxiableUUID","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"requestOwnershipHandover","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"newImplementation","type":"address"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"upgradeToAndCall","outputs":[],"stateMutability":"payable","type":"function"}]