Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.22;

import { VaultComposerSync } from "@layerzerolabs/ovault-evm/contracts/VaultComposerSync.sol";

/**
 * @title wstUSRComposer
 * @author LayerZero Labs (@shankars99)
 * @notice Cross-chain vault composer enabling omnichain vault operations via LayerZero
 */
contract wstUSRComposer is VaultComposerSync {
    /**
     * @notice Creates a new cross-chain vault composer
     * @dev Initializes the composer with vault and OFT contracts for omnichain operations
     * @param _ovault The vault contract implementing ERC4626 for deposit/redeem operations
     * @param _assetOFT The OFT contract for cross-chain asset transfers
     * @param _shareOFT The OFT contract for cross-chain share transfers
     */
    constructor(
        address _ovault,
        address _assetOFT,
        address _shareOFT
    ) VaultComposerSync(_ovault, _assetOFT, _shareOFT) {}
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.8.0;

/**
 * @title ILayerZeroComposer
 */
interface ILayerZeroComposer {
    /**
     * @notice Composes a LayerZero message from an OApp.
     * @dev To ensure non-reentrancy, implementers of this interface MUST assert msg.sender is the corresponding EndpointV2 contract (i.e., onlyEndpointV2).
     * @param _from The address initiating the composition, typically the OApp where the lzReceive was called.
     * @param _guid The unique identifier for the corresponding LayerZero src/dst tx.
     * @param _message The composed message payload in bytes. NOT necessarily the same payload passed via lzReceive.
     * @param _executor The address of the executor for the composed message.
     * @param _extraData Additional arbitrary data in bytes passed by the entity who executes the lzCompose.
     */
    function lzCompose(
        address _from,
        bytes32 _guid,
        bytes calldata _message,
        address _executor,
        bytes calldata _extraData
    ) external payable;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.8.0;

import { IMessageLibManager } from "./IMessageLibManager.sol";
import { IMessagingComposer } from "./IMessagingComposer.sol";
import { IMessagingChannel } from "./IMessagingChannel.sol";
import { IMessagingContext } from "./IMessagingContext.sol";

struct MessagingParams {
    uint32 dstEid;
    bytes32 receiver;
    bytes message;
    bytes options;
    bool payInLzToken;
}

struct MessagingReceipt {
    bytes32 guid;
    uint64 nonce;
    MessagingFee fee;
}

struct MessagingFee {
    uint256 nativeFee;
    uint256 lzTokenFee;
}

struct Origin {
    uint32 srcEid;
    bytes32 sender;
    uint64 nonce;
}

interface ILayerZeroEndpointV2 is IMessageLibManager, IMessagingComposer, IMessagingChannel, IMessagingContext {
    event PacketSent(bytes encodedPayload, bytes options, address sendLibrary);

    event PacketVerified(Origin origin, address receiver, bytes32 payloadHash);

    event PacketDelivered(Origin origin, address receiver);

    event LzReceiveAlert(
        address indexed receiver,
        address indexed executor,
        Origin origin,
        bytes32 guid,
        uint256 gas,
        uint256 value,
        bytes message,
        bytes extraData,
        bytes reason
    );

    event LzTokenSet(address token);

    event DelegateSet(address sender, address delegate);

    function quote(MessagingParams calldata _params, address _sender) external view returns (MessagingFee memory);

    function send(
        MessagingParams calldata _params,
        address _refundAddress
    ) external payable returns (MessagingReceipt memory);

    function verify(Origin calldata _origin, address _receiver, bytes32 _payloadHash) external;

    function verifiable(Origin calldata _origin, address _receiver) external view returns (bool);

    function initializable(Origin calldata _origin, address _receiver) external view returns (bool);

    function lzReceive(
        Origin calldata _origin,
        address _receiver,
        bytes32 _guid,
        bytes calldata _message,
        bytes calldata _extraData
    ) external payable;

    // oapp can burn messages partially by calling this function with its own business logic if messages are verified in order
    function clear(address _oapp, Origin calldata _origin, bytes32 _guid, bytes calldata _message) external;

    function setLzToken(address _lzToken) external;

    function lzToken() external view returns (address);

    function nativeToken() external view returns (address);

    function setDelegate(address _delegate) external;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.8.0;

struct SetConfigParam {
    uint32 eid;
    uint32 configType;
    bytes config;
}

interface IMessageLibManager {
    struct Timeout {
        address lib;
        uint256 expiry;
    }

    event LibraryRegistered(address newLib);
    event DefaultSendLibrarySet(uint32 eid, address newLib);
    event DefaultReceiveLibrarySet(uint32 eid, address newLib);
    event DefaultReceiveLibraryTimeoutSet(uint32 eid, address oldLib, uint256 expiry);
    event SendLibrarySet(address sender, uint32 eid, address newLib);
    event ReceiveLibrarySet(address receiver, uint32 eid, address newLib);
    event ReceiveLibraryTimeoutSet(address receiver, uint32 eid, address oldLib, uint256 timeout);

    function registerLibrary(address _lib) external;

    function isRegisteredLibrary(address _lib) external view returns (bool);

    function getRegisteredLibraries() external view returns (address[] memory);

    function setDefaultSendLibrary(uint32 _eid, address _newLib) external;

    function defaultSendLibrary(uint32 _eid) external view returns (address);

    function setDefaultReceiveLibrary(uint32 _eid, address _newLib, uint256 _gracePeriod) external;

    function defaultReceiveLibrary(uint32 _eid) external view returns (address);

    function setDefaultReceiveLibraryTimeout(uint32 _eid, address _lib, uint256 _expiry) external;

    function defaultReceiveLibraryTimeout(uint32 _eid) external view returns (address lib, uint256 expiry);

    function isSupportedEid(uint32 _eid) external view returns (bool);

    function isValidReceiveLibrary(address _receiver, uint32 _eid, address _lib) external view returns (bool);

    /// ------------------- OApp interfaces -------------------
    function setSendLibrary(address _oapp, uint32 _eid, address _newLib) external;

    function getSendLibrary(address _sender, uint32 _eid) external view returns (address lib);

    function isDefaultSendLibrary(address _sender, uint32 _eid) external view returns (bool);

    function setReceiveLibrary(address _oapp, uint32 _eid, address _newLib, uint256 _gracePeriod) external;

    function getReceiveLibrary(address _receiver, uint32 _eid) external view returns (address lib, bool isDefault);

    function setReceiveLibraryTimeout(address _oapp, uint32 _eid, address _lib, uint256 _expiry) external;

    function receiveLibraryTimeout(address _receiver, uint32 _eid) external view returns (address lib, uint256 expiry);

    function setConfig(address _oapp, address _lib, SetConfigParam[] calldata _params) external;

    function getConfig(
        address _oapp,
        address _lib,
        uint32 _eid,
        uint32 _configType
    ) external view returns (bytes memory config);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.8.0;

interface IMessagingChannel {
    event InboundNonceSkipped(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce);
    event PacketNilified(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce, bytes32 payloadHash);
    event PacketBurnt(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce, bytes32 payloadHash);

    function eid() external view returns (uint32);

    // this is an emergency function if a message cannot be verified for some reasons
    // required to provide _nextNonce to avoid race condition
    function skip(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce) external;

    function nilify(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce, bytes32 _payloadHash) external;

    function burn(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce, bytes32 _payloadHash) external;

    function nextGuid(address _sender, uint32 _dstEid, bytes32 _receiver) external view returns (bytes32);

    function inboundNonce(address _receiver, uint32 _srcEid, bytes32 _sender) external view returns (uint64);

    function outboundNonce(address _sender, uint32 _dstEid, bytes32 _receiver) external view returns (uint64);

    function inboundPayloadHash(
        address _receiver,
        uint32 _srcEid,
        bytes32 _sender,
        uint64 _nonce
    ) external view returns (bytes32);

    function lazyInboundNonce(address _receiver, uint32 _srcEid, bytes32 _sender) external view returns (uint64);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.8.0;

interface IMessagingComposer {
    event ComposeSent(address from, address to, bytes32 guid, uint16 index, bytes message);
    event ComposeDelivered(address from, address to, bytes32 guid, uint16 index);
    event LzComposeAlert(
        address indexed from,
        address indexed to,
        address indexed executor,
        bytes32 guid,
        uint16 index,
        uint256 gas,
        uint256 value,
        bytes message,
        bytes extraData,
        bytes reason
    );

    function composeQueue(
        address _from,
        address _to,
        bytes32 _guid,
        uint16 _index
    ) external view returns (bytes32 messageHash);

    function sendCompose(address _to, bytes32 _guid, uint16 _index, bytes calldata _message) external;

    function lzCompose(
        address _from,
        address _to,
        bytes32 _guid,
        uint16 _index,
        bytes calldata _message,
        bytes calldata _extraData
    ) external payable;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.8.0;

interface IMessagingContext {
    function isSendingMessage() external view returns (bool);

    function getSendContext() external view returns (uint32 dstEid, address sender);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ILayerZeroComposer } from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroComposer.sol";

/**
 * @title IOAppComposer
 * @dev This interface defines the OApp Composer, allowing developers to inherit only the OApp package without the protocol.
 */
// solhint-disable-next-line no-empty-blocks
interface IOAppComposer is ILayerZeroComposer {}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ILayerZeroEndpointV2 } from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroEndpointV2.sol";

/**
 * @title IOAppCore
 */
interface IOAppCore {
    // Custom error messages
    error OnlyPeer(uint32 eid, bytes32 sender);
    error NoPeer(uint32 eid);
    error InvalidEndpointCall();
    error InvalidDelegate();

    // Event emitted when a peer (OApp) is set for a corresponding endpoint
    event PeerSet(uint32 eid, bytes32 peer);

    /**
     * @notice Retrieves the OApp version information.
     * @return senderVersion The version of the OAppSender.sol contract.
     * @return receiverVersion The version of the OAppReceiver.sol contract.
     */
    function oAppVersion() external view returns (uint64 senderVersion, uint64 receiverVersion);

    /**
     * @notice Retrieves the LayerZero endpoint associated with the OApp.
     * @return iEndpoint The LayerZero endpoint as an interface.
     */
    function endpoint() external view returns (ILayerZeroEndpointV2 iEndpoint);

    /**
     * @notice Retrieves the peer (OApp) associated with a corresponding endpoint.
     * @param _eid The endpoint ID.
     * @return peer The peer address (OApp instance) associated with the corresponding endpoint.
     */
    function peers(uint32 _eid) external view returns (bytes32 peer);

    /**
     * @notice Sets the peer address (OApp instance) for a corresponding endpoint.
     * @param _eid The endpoint ID.
     * @param _peer The address of the peer to be associated with the corresponding endpoint.
     */
    function setPeer(uint32 _eid, bytes32 _peer) external;

    /**
     * @notice Sets the delegate address for the OApp Core.
     * @param _delegate The address of the delegate to be set.
     */
    function setDelegate(address _delegate) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { IOAppCore, ILayerZeroEndpointV2 } from "./interfaces/IOAppCore.sol";

/**
 * @title OAppCore
 * @dev Abstract contract implementing the IOAppCore interface with basic OApp configurations.
 */
abstract contract OAppCore is IOAppCore, Ownable {
    // The LayerZero endpoint associated with the given OApp
    ILayerZeroEndpointV2 public immutable endpoint;

    // Mapping to store peers associated with corresponding endpoints
    mapping(uint32 eid => bytes32 peer) public peers;

    /**
     * @dev Constructor to initialize the OAppCore with the provided endpoint and delegate.
     * @param _endpoint The address of the LOCAL Layer Zero endpoint.
     * @param _delegate The delegate capable of making OApp configurations inside of the endpoint.
     *
     * @dev The delegate typically should be set as the owner of the contract.
     */
    constructor(address _endpoint, address _delegate) {
        endpoint = ILayerZeroEndpointV2(_endpoint);

        if (_delegate == address(0)) revert InvalidDelegate();
        endpoint.setDelegate(_delegate);
    }

    /**
     * @notice Sets the peer address (OApp instance) for a corresponding endpoint.
     * @param _eid The endpoint ID.
     * @param _peer The address of the peer to be associated with the corresponding endpoint.
     *
     * @dev Only the owner/admin of the OApp can call this function.
     * @dev Indicates that the peer is trusted to send LayerZero messages to this OApp.
     * @dev Set this to bytes32(0) to remove the peer address.
     * @dev Peer is a bytes32 to accommodate non-evm chains.
     */
    function setPeer(uint32 _eid, bytes32 _peer) public virtual onlyOwner {
        _setPeer(_eid, _peer);
    }

    /**
     * @notice Sets the peer address (OApp instance) for a corresponding endpoint.
     * @param _eid The endpoint ID.
     * @param _peer The address of the peer to be associated with the corresponding endpoint.
     *
     * @dev Indicates that the peer is trusted to send LayerZero messages to this OApp.
     * @dev Set this to bytes32(0) to remove the peer address.
     * @dev Peer is a bytes32 to accommodate non-evm chains.
     */
    function _setPeer(uint32 _eid, bytes32 _peer) internal virtual {
        peers[_eid] = _peer;
        emit PeerSet(_eid, _peer);
    }

    /**
     * @notice Internal function to get the peer address associated with a specific endpoint; reverts if NOT set.
     * ie. the peer is set to bytes32(0).
     * @param _eid The endpoint ID.
     * @return peer The address of the peer associated with the specified endpoint.
     */
    function _getPeerOrRevert(uint32 _eid) internal view virtual returns (bytes32) {
        bytes32 peer = peers[_eid];
        if (peer == bytes32(0)) revert NoPeer(_eid);
        return peer;
    }

    /**
     * @notice Sets the delegate address for the OApp.
     * @param _delegate The address of the delegate to be set.
     *
     * @dev Only the owner/admin of the OApp can call this function.
     * @dev Provides the ability for a delegate to set configs, on behalf of the OApp, directly on the Endpoint contract.
     */
    function setDelegate(address _delegate) public onlyOwner {
        endpoint.setDelegate(_delegate);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { SafeERC20, IERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { MessagingParams, MessagingFee, MessagingReceipt } from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroEndpointV2.sol";
import { OAppCore } from "./OAppCore.sol";

/**
 * @title OAppSender
 * @dev Abstract contract implementing the OAppSender functionality for sending messages to a LayerZero endpoint.
 */
abstract contract OAppSender is OAppCore {
    using SafeERC20 for IERC20;

    // Custom error messages
    error NotEnoughNative(uint256 msgValue);
    error LzTokenUnavailable();

    // @dev The version of the OAppSender implementation.
    // @dev Version is bumped when changes are made to this contract.
    uint64 internal constant SENDER_VERSION = 1;

    /**
     * @notice Retrieves the OApp version information.
     * @return senderVersion The version of the OAppSender.sol contract.
     * @return receiverVersion The version of the OAppReceiver.sol contract.
     *
     * @dev Providing 0 as the default for OAppReceiver version. Indicates that the OAppReceiver is not implemented.
     * ie. this is a SEND only OApp.
     * @dev If the OApp uses both OAppSender and OAppReceiver, then this needs to be override returning the correct versions
     */
    function oAppVersion() public view virtual returns (uint64 senderVersion, uint64 receiverVersion) {
        return (SENDER_VERSION, 0);
    }

    /**
     * @dev Internal function to interact with the LayerZero EndpointV2.quote() for fee calculation.
     * @param _dstEid The destination endpoint ID.
     * @param _message The message payload.
     * @param _options Additional options for the message.
     * @param _payInLzToken Flag indicating whether to pay the fee in LZ tokens.
     * @return fee The calculated MessagingFee for the message.
     *      - nativeFee: The native fee for the message.
     *      - lzTokenFee: The LZ token fee for the message.
     */
    function _quote(
        uint32 _dstEid,
        bytes memory _message,
        bytes memory _options,
        bool _payInLzToken
    ) internal view virtual returns (MessagingFee memory fee) {
        return
            endpoint.quote(
                MessagingParams(_dstEid, _getPeerOrRevert(_dstEid), _message, _options, _payInLzToken),
                address(this)
            );
    }

    /**
     * @dev Internal function to interact with the LayerZero EndpointV2.send() for sending a message.
     * @param _dstEid The destination endpoint ID.
     * @param _message The message payload.
     * @param _options Additional options for the message.
     * @param _fee The calculated LayerZero fee for the message.
     *      - nativeFee: The native fee.
     *      - lzTokenFee: The lzToken fee.
     * @param _refundAddress The address to receive any excess fee values sent to the endpoint.
     * @return receipt The receipt for the sent message.
     *      - guid: The unique identifier for the sent message.
     *      - nonce: The nonce of the sent message.
     *      - fee: The LayerZero fee incurred for the message.
     */
    function _lzSend(
        uint32 _dstEid,
        bytes memory _message,
        bytes memory _options,
        MessagingFee memory _fee,
        address _refundAddress
    ) internal virtual returns (MessagingReceipt memory receipt) {
        // @dev Push corresponding fees to the endpoint, any excess is sent back to the _refundAddress from the endpoint.
        uint256 messageValue = _payNative(_fee.nativeFee);
        if (_fee.lzTokenFee > 0) _payLzToken(_fee.lzTokenFee);

        return
            // solhint-disable-next-line check-send-result
            endpoint.send{ value: messageValue }(
                MessagingParams(_dstEid, _getPeerOrRevert(_dstEid), _message, _options, _fee.lzTokenFee > 0),
                _refundAddress
            );
    }

    /**
     * @dev Internal function to pay the native fee associated with the message.
     * @param _nativeFee The native fee to be paid.
     * @return nativeFee The amount of native currency paid.
     *
     * @dev If the OApp needs to initiate MULTIPLE LayerZero messages in a single transaction,
     * this will need to be overridden because msg.value would contain multiple lzFees.
     * @dev Should be overridden in the event the LayerZero endpoint requires a different native currency.
     * @dev Some EVMs use an ERC20 as a method for paying transactions/gasFees.
     * @dev The endpoint is EITHER/OR, ie. it will NOT support both types of native payment at a time.
     */
    function _payNative(uint256 _nativeFee) internal virtual returns (uint256 nativeFee) {
        if (msg.value != _nativeFee) revert NotEnoughNative(msg.value);
        return _nativeFee;
    }

    /**
     * @dev Internal function to pay the LZ token fee associated with the message.
     * @param _lzTokenFee The LZ token fee to be paid.
     *
     * @dev If the caller is trying to pay in the specified lzToken, then the lzTokenFee is passed to the endpoint.
     * @dev Any excess sent, is passed back to the specified _refundAddress in the _lzSend().
     */
    function _payLzToken(uint256 _lzTokenFee) internal virtual {
        // @dev Cannot cache the token because it is not immutable in the endpoint.
        address lzToken = endpoint.lzToken();
        if (lzToken == address(0)) revert LzTokenUnavailable();

        // Pay LZ token fee by sending tokens to the endpoint.
        IERC20(lzToken).safeTransferFrom(msg.sender, address(endpoint), _lzTokenFee);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { MessagingReceipt, MessagingFee } from "@layerzerolabs/oapp-evm/contracts/oapp/OAppSender.sol";

/**
 * @dev Struct representing token parameters for the OFT send() operation.
 */
struct SendParam {
    uint32 dstEid; // Destination endpoint ID.
    bytes32 to; // Recipient address.
    uint256 amountLD; // Amount to send in local decimals.
    uint256 minAmountLD; // Minimum amount to send in local decimals.
    bytes extraOptions; // Additional options supplied by the caller to be used in the LayerZero message.
    bytes composeMsg; // The composed message for the send() operation.
    bytes oftCmd; // The OFT command to be executed, unused in default OFT implementations.
}

/**
 * @dev Struct representing OFT limit information.
 * @dev These amounts can change dynamically and are up the specific oft implementation.
 */
struct OFTLimit {
    uint256 minAmountLD; // Minimum amount in local decimals that can be sent to the recipient.
    uint256 maxAmountLD; // Maximum amount in local decimals that can be sent to the recipient.
}

/**
 * @dev Struct representing OFT receipt information.
 */
struct OFTReceipt {
    uint256 amountSentLD; // Amount of tokens ACTUALLY debited from the sender in local decimals.
    // @dev In non-default implementations, the amountReceivedLD COULD differ from this value.
    uint256 amountReceivedLD; // Amount of tokens to be received on the remote side.
}

/**
 * @dev Struct representing OFT fee details.
 * @dev Future proof mechanism to provide a standardized way to communicate fees to things like a UI.
 */
struct OFTFeeDetail {
    int256 feeAmountLD; // Amount of the fee in local decimals.
    string description; // Description of the fee.
}

/**
 * @title IOFT
 * @dev Interface for the OftChain (OFT) token.
 * @dev Does not inherit ERC20 to accommodate usage by OFTAdapter as well.
 * @dev This specific interface ID is '0x02e49c2c'.
 */
interface IOFT {
    // Custom error messages
    error InvalidLocalDecimals();
    error SlippageExceeded(uint256 amountLD, uint256 minAmountLD);
    error AmountSDOverflowed(uint256 amountSD);

    // Events
    event OFTSent(
        bytes32 indexed guid, // GUID of the OFT message.
        uint32 dstEid, // Destination Endpoint ID.
        address indexed fromAddress, // Address of the sender on the src chain.
        uint256 amountSentLD, // Amount of tokens sent in local decimals.
        uint256 amountReceivedLD // Amount of tokens received in local decimals.
    );
    event OFTReceived(
        bytes32 indexed guid, // GUID of the OFT message.
        uint32 srcEid, // Source Endpoint ID.
        address indexed toAddress, // Address of the recipient on the dst chain.
        uint256 amountReceivedLD // Amount of tokens received in local decimals.
    );

    /**
     * @notice Retrieves interfaceID and the version of the OFT.
     * @return interfaceId The interface ID.
     * @return version The version.
     *
     * @dev interfaceId: This specific interface ID is '0x02e49c2c'.
     * @dev version: Indicates a cross-chain compatible msg encoding with other OFTs.
     * @dev If a new feature is added to the OFT cross-chain msg encoding, the version will be incremented.
     * ie. localOFT version(x,1) CAN send messages to remoteOFT version(x,1)
     */
    function oftVersion() external view returns (bytes4 interfaceId, uint64 version);

    /**
     * @notice Retrieves the address of the token associated with the OFT.
     * @return token The address of the ERC20 token implementation.
     */
    function token() external view returns (address);

    /**
     * @notice Indicates whether the OFT contract requires approval of the 'token()' to send.
     * @return requiresApproval Needs approval of the underlying token implementation.
     *
     * @dev Allows things like wallet implementers to determine integration requirements,
     * without understanding the underlying token implementation.
     */
    function approvalRequired() external view returns (bool);

    /**
     * @notice Retrieves the shared decimals of the OFT.
     * @return sharedDecimals The shared decimals of the OFT.
     */
    function sharedDecimals() external view returns (uint8);

    /**
     * @notice Provides the fee breakdown and settings data for an OFT. Unused in the default implementation.
     * @param _sendParam The parameters for the send operation.
     * @return limit The OFT limit information.
     * @return oftFeeDetails The details of OFT fees.
     * @return receipt The OFT receipt information.
     */
    function quoteOFT(
        SendParam calldata _sendParam
    ) external view returns (OFTLimit memory, OFTFeeDetail[] memory oftFeeDetails, OFTReceipt memory);

    /**
     * @notice Provides a quote for the send() operation.
     * @param _sendParam The parameters for the send() operation.
     * @param _payInLzToken Flag indicating whether the caller is paying in the LZ token.
     * @return fee The calculated LayerZero messaging fee from the send() operation.
     *
     * @dev MessagingFee: LayerZero msg fee
     *  - nativeFee: The native fee.
     *  - lzTokenFee: The lzToken fee.
     */
    function quoteSend(SendParam calldata _sendParam, bool _payInLzToken) external view returns (MessagingFee memory);

    /**
     * @notice Executes the send() operation.
     * @param _sendParam The parameters for the send operation.
     * @param _fee The fee information supplied by the caller.
     *      - nativeFee: The native fee.
     *      - lzTokenFee: The lzToken fee.
     * @param _refundAddress The address to receive any excess funds from fees etc. on the src.
     * @return receipt The LayerZero messaging receipt from the send() operation.
     * @return oftReceipt The OFT receipt information.
     *
     * @dev MessagingReceipt: LayerZero msg receipt
     *  - guid: The unique identifier for the sent message.
     *  - nonce: The nonce of the sent message.
     *  - fee: The LayerZero fee incurred for the message.
     */
    function send(
        SendParam calldata _sendParam,
        MessagingFee calldata _fee,
        address _refundAddress
    ) external payable returns (MessagingReceipt memory, OFTReceipt memory);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

library OFTComposeMsgCodec {
    // Offset constants for decoding composed messages
    uint8 private constant NONCE_OFFSET = 8;
    uint8 private constant SRC_EID_OFFSET = 12;
    uint8 private constant AMOUNT_LD_OFFSET = 44;
    uint8 private constant COMPOSE_FROM_OFFSET = 76;

    /**
     * @dev Encodes a OFT composed message.
     * @param _nonce The nonce value.
     * @param _srcEid The source endpoint ID.
     * @param _amountLD The amount in local decimals.
     * @param _composeMsg The composed message.
     * @return _msg The encoded Composed message.
     */
    function encode(
        uint64 _nonce,
        uint32 _srcEid,
        uint256 _amountLD,
        bytes memory _composeMsg // 0x[composeFrom][composeMsg]
    ) internal pure returns (bytes memory _msg) {
        _msg = abi.encodePacked(_nonce, _srcEid, _amountLD, _composeMsg);
    }

    /**
     * @dev Retrieves the nonce for the composed message.
     * @param _msg The message.
     * @return The nonce value.
     */
    function nonce(bytes calldata _msg) internal pure returns (uint64) {
        return uint64(bytes8(_msg[:NONCE_OFFSET]));
    }

    /**
     * @dev Retrieves the source endpoint ID for the composed message.
     * @param _msg The message.
     * @return The source endpoint ID.
     */
    function srcEid(bytes calldata _msg) internal pure returns (uint32) {
        return uint32(bytes4(_msg[NONCE_OFFSET:SRC_EID_OFFSET]));
    }

    /**
     * @dev Retrieves the amount in local decimals from the composed message.
     * @param _msg The message.
     * @return The amount in local decimals.
     */
    function amountLD(bytes calldata _msg) internal pure returns (uint256) {
        return uint256(bytes32(_msg[SRC_EID_OFFSET:AMOUNT_LD_OFFSET]));
    }

    /**
     * @dev Retrieves the composeFrom value from the composed message.
     * @param _msg The message.
     * @return The composeFrom value.
     */
    function composeFrom(bytes calldata _msg) internal pure returns (bytes32) {
        return bytes32(_msg[AMOUNT_LD_OFFSET:COMPOSE_FROM_OFFSET]);
    }

    /**
     * @dev Retrieves the composed message.
     * @param _msg The message.
     * @return The composed message.
     */
    function composeMsg(bytes calldata _msg) internal pure returns (bytes memory) {
        return _msg[COMPOSE_FROM_OFFSET:];
    }

    /**
     * @dev Converts an address to bytes32.
     * @param _addr The address to convert.
     * @return The bytes32 representation of the address.
     */
    function addressToBytes32(address _addr) internal pure returns (bytes32) {
        return bytes32(uint256(uint160(_addr)));
    }

    /**
     * @dev Converts bytes32 to an address.
     * @param _b The bytes32 value to convert.
     * @return The address representation of bytes32.
     */
    function bytes32ToAddress(bytes32 _b) internal pure returns (address) {
        return address(uint160(uint256(_b)));
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.22;

import { IERC4626 } from "@openzeppelin/contracts/interfaces/IERC4626.sol";

import { IOAppComposer } from "@layerzerolabs/oapp-evm/contracts/oapp/interfaces/IOAppComposer.sol";
import { SendParam, MessagingFee } from "@layerzerolabs/oft-evm/contracts/interfaces/IOFT.sol";

interface IVaultComposerSync is IOAppComposer {
    /// ========================== EVENTS =====================================
    event Sent(bytes32 indexed guid); // 0x27b5aea9
    event Refunded(bytes32 indexed guid); // 0xfe509803

    event Deposited(bytes32 sender, bytes32 recipient, uint32 dstEid, uint256 assetAmt, uint256 shareAmt); // 0xa53b96f2
    event Redeemed(bytes32 sender, bytes32 recipient, uint32 dstEid, uint256 shareAmt, uint256 assetAmt); // 0x57e232f1

    /// ========================== Error Messages =====================================
    error ShareOFTNotAdapter(address shareOFT); // 0xfc1514ae
    error ShareTokenNotVault(address shareERC20, address vault); // 0x0e178ab6
    error AssetTokenNotVaultAsset(address assetERC20, address vaultAsset); // 0xba9d665f

    error OnlyEndpoint(address caller); // 0x91ac5e4f
    error OnlySelf(address caller); // 0xa19dbf00
    error OnlyValidComposeCaller(address caller); // 0x84fb3f0d

    error InsufficientMsgValue(uint256 expectedMsgValue, uint256 actualMsgValue); // 0x7cb769dc
    error NoMsgValueExpected(); // 0x7578d2bd

    error SlippageExceeded(uint256 amountLD, uint256 minAmountLD); // 0x71c4efed

    /// ========================== GLOBAL VARIABLE FUNCTIONS =====================================
    function VAULT() external view returns (IERC4626);

    function ASSET_OFT() external view returns (address);
    function ASSET_ERC20() external view returns (address);
    function SHARE_OFT() external view returns (address);
    function SHARE_ERC20() external view returns (address);

    function ENDPOINT() external view returns (address);
    function VAULT_EID() external view returns (uint32);

    /// ========================== Proxy OFT =====================================

    /**
     * @notice Deposits ERC20 assets from the caller into the vault and sends them to the recipient
     * @param assetAmount The number of ERC20 tokens to deposit and send
     * @param sendParam Parameters on how to send the shares to the recipient
     * @param refundAddress Address to receive excess `msg.value`
     */
    function depositAndSend(uint256 assetAmount, SendParam memory sendParam, address refundAddress) external payable;

    /**
     * @notice Redeems vault shares and sends the resulting assets to the user
     * @param shareAmount The number of vault shares to redeem
     * @param sendParam Parameter that defines how to send the assets
     * @param refundAddress Address to receive excess payment of the LZ fees
     */
    function redeemAndSend(uint256 shareAmount, SendParam memory sendParam, address refundAddress) external payable;

    /**
     * @notice Quotes the send operation for the given OFT and SendParam
     * @param from The "sender address" used for the quote
     * @param targetOft The OFT contract address to quote
     * @param vaultInAmount The amount of tokens to send to the vault
     * @param sendParam The parameters for the send operation
     * @return MessagingFee The estimated fee for the send operation
     * @dev This function can be overridden to implement custom quoting logic
     */
    function quoteSend(
        address from,
        address targetOft,
        uint256 vaultInAmount,
        SendParam memory sendParam
    ) external view returns (MessagingFee memory);

    /// ========================== Receive =====================================
    receive() external payable;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.22;

import { SafeERC20, IERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { ERC4626, IERC4626 } from "@openzeppelin/contracts/token/ERC20/extensions/ERC4626.sol";

import { ReentrancyGuard } from "@openzeppelin/contracts/utils/ReentrancyGuard.sol";

import { IOFT, SendParam, MessagingFee } from "@layerzerolabs/oft-evm/contracts/interfaces/IOFT.sol";
import { IOAppCore } from "@layerzerolabs/oapp-evm/contracts/oapp/interfaces/IOAppCore.sol";
import { ILayerZeroEndpointV2 } from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroEndpointV2.sol";
import { OFTComposeMsgCodec } from "@layerzerolabs/oft-evm/contracts/libs/OFTComposeMsgCodec.sol";

import { IVaultComposerSync } from "./interfaces/IVaultComposerSync.sol";

/**
 * @title VaultComposerSync - Synchronous Vault Composer
 * @author LayerZero Labs (@shankars99, @TRileySchwarz)
 * @notice This contract is a composer that allows deposits and redemptions operations against a
 *         synchronous vault across different chains using LayerZero's OFT protocol.
 * @dev The contract is designed to handle deposits and redemptions of vault shares and assets,
 *      ensuring that the share and asset tokens are correctly managed and transferred across chains.
 *      It also includes slippage protection and refund mechanisms for failed transactions.
 * @dev Default refunds are enabled to EOA addresses only on the source.
        Custom refunds to contracts can be implemented by overriding the _refund function.
 * @dev Default vault interface is IERC4626 - [ERC4626](https://eips.ethereum.org/EIPS/eip-4626) compliant vaults.
 *      Custom vaults can be implemented by overriding the _deposit and _redeem functions.
 */
contract VaultComposerSync is IVaultComposerSync, ReentrancyGuard {
    using OFTComposeMsgCodec for bytes;
    using OFTComposeMsgCodec for bytes32;
    using SafeERC20 for IERC20;

    /// @dev Must be a synchronous vault - NO 2-step redemptions/deposit windows
    IERC4626 public immutable VAULT;

    address public immutable ASSET_OFT;
    address public immutable ASSET_ERC20;
    address public immutable SHARE_OFT;
    address public immutable SHARE_ERC20;

    address public immutable ENDPOINT;
    uint32 public immutable VAULT_EID;

    /**
     * @notice Initializes the VaultComposerSync contract with vault and OFT token addresses
     * @param _vault The address of the ERC4626 vault contract
     * @param _assetOFT The address of the asset OFT (Omnichain Fungible Token) contract
     * @param _shareOFT The address of the share OFT contract (must be an adapter)
     *
     * Requirements:
     * - Share token must be the vault itself
     * - Asset token must match the vault's underlying asset
     * - Share OFT must be an adapter (approvalRequired() returns true)
     */
    constructor(address _vault, address _assetOFT, address _shareOFT) {
        VAULT = IERC4626(_vault);

        ASSET_OFT = _assetOFT;
        ASSET_ERC20 = IOFT(ASSET_OFT).token();
        SHARE_OFT = _shareOFT;
        SHARE_ERC20 = IOFT(SHARE_OFT).token();

        ENDPOINT = address(IOAppCore(ASSET_OFT).endpoint());
        VAULT_EID = ILayerZeroEndpointV2(ENDPOINT).eid();

        if (SHARE_ERC20 != address(VAULT)) {
            revert ShareTokenNotVault(SHARE_ERC20, address(VAULT));
        }

        if (ASSET_ERC20 != address(VAULT.asset())) {
            revert AssetTokenNotVaultAsset(ASSET_ERC20, address(VAULT.asset()));
        }

        /// @dev ShareOFT must be an OFT adapter. We can infer this by checking 'approvalRequired()'.
        /// @dev burn() on tokens when a user sends changes totalSupply() which the asset:share ratio depends on.
        if (!IOFT(SHARE_OFT).approvalRequired()) revert ShareOFTNotAdapter(SHARE_OFT);

        /// @dev Approve the vault to spend the asset tokens held by this contract
        IERC20(ASSET_ERC20).approve(_vault, type(uint256).max);
        /// @dev Approving the vault for the share erc20 is not required when the vault is the share erc20
        // IERC20(SHARE_ERC20).approve(_vault, type(uint256).max);

        /// @dev Approve the share adapter with the share tokens held by this contract
        IERC20(SHARE_ERC20).approve(_shareOFT, type(uint256).max);
        /// @dev If the asset OFT is an adapter, approve it as well
        if (IOFT(_assetOFT).approvalRequired()) IERC20(ASSET_ERC20).approve(_assetOFT, type(uint256).max);
    }

    /**
     * @notice Handles LayerZero compose operations for vault transactions with automatic refund functionality
     * @dev This composer is designed to handle refunds to an EOA address and not a contract
     * @dev Any revert in handleCompose() causes a refund back to the src EXCEPT for InsufficientMsgValue
     * @param _composeSender The OFT contract address used for refunds, must be either ASSET_OFT or SHARE_OFT
     * @param _guid LayerZero's unique tx id (created on the source tx)
     * @param _message Decomposable bytes object into [composeHeader][composeMessage]
     */
    function lzCompose(
        address _composeSender, // The OFT used on refund, also the vaultIn token.
        bytes32 _guid,
        bytes calldata _message, // expected to contain a composeMessage = abi.encode(SendParam hopSendParam,uint256 minMsgValue)
        address /*_executor*/,
        bytes calldata /*_extraData*/
    ) external payable virtual override {
        if (msg.sender != ENDPOINT) revert OnlyEndpoint(msg.sender);
        if (_composeSender != ASSET_OFT && _composeSender != SHARE_OFT) revert OnlyValidComposeCaller(_composeSender);

        bytes32 composeFrom = _message.composeFrom();
        uint256 amount = _message.amountLD();
        bytes memory composeMsg = _message.composeMsg();

        /// @dev try...catch to handle the compose operation. if it fails we refund the user
        try this.handleCompose{ value: msg.value }(_composeSender, composeFrom, composeMsg, amount) {
            emit Sent(_guid);
        } catch (bytes memory _err) {
            /// @dev A revert where the msg.value passed is lower than the min expected msg.value is handled separately
            /// This is because it is possible to re-trigger from the endpoint the compose operation with the right msg.value
            if (bytes4(_err) == InsufficientMsgValue.selector) {
                assembly {
                    revert(add(32, _err), mload(_err))
                }
            }

            _refund(_composeSender, _message, amount, tx.origin);
            emit Refunded(_guid);
        }
    }

    /**
     * @notice Handles the compose operation for OFT (Omnichain Fungible Token) transactions
     * @dev This function can only be called by the contract itself (self-call restriction)
     *      Decodes the compose message to extract SendParam and minimum message value
     *      Routes to either deposit or redeem flow based on the input OFT token type
     * @param _oftIn The OFT token whose funds have been received in the lzReceive associated with this lzTx
     * @param _composeFrom The bytes32 identifier of the compose sender
     * @param _composeMsg The encoded message containing SendParam and minMsgValue
     * @param _amount The amount of tokens received in the lzReceive associated with this lzTx
     */
    function handleCompose(
        address _oftIn,
        bytes32 _composeFrom,
        bytes memory _composeMsg,
        uint256 _amount
    ) external payable {
        /// @dev Can only be called by self
        if (msg.sender != address(this)) revert OnlySelf(msg.sender);

        /// @dev SendParam defines how the composer will handle the user's funds
        /// @dev The minMsgValue is the minimum amount of msg.value that must be sent, failing to do so will revert and the transaction will be retained in the endpoint for future retries
        (SendParam memory sendParam, uint256 minMsgValue) = abi.decode(_composeMsg, (SendParam, uint256));
        if (msg.value < minMsgValue) revert InsufficientMsgValue(minMsgValue, msg.value);

        if (_oftIn == ASSET_OFT) {
            _depositAndSend(_composeFrom, _amount, sendParam, tx.origin);
        } else {
            _redeemAndSend(_composeFrom, _amount, sendParam, tx.origin);
        }
    }

    /**
     * @notice Deposits ERC20 assets from the caller into the vault and sends them to the recipient
     * @param _assetAmount The number of ERC20 tokens to deposit and send
     * @param _sendParam Parameters on how to send the shares to the recipient
     * @param _refundAddress Address to receive excess `msg.value`
     */
    function depositAndSend(
        uint256 _assetAmount,
        SendParam memory _sendParam,
        address _refundAddress
    ) external payable virtual nonReentrant {
        IERC20(ASSET_ERC20).safeTransferFrom(msg.sender, address(this), _assetAmount);
        _depositAndSend(OFTComposeMsgCodec.addressToBytes32(msg.sender), _assetAmount, _sendParam, _refundAddress);
    }

    /**
     * @dev Internal function that deposits assets and sends shares to another chain
     * @param _depositor The depositor (bytes32 format to account for non-evm addresses)
     * @param _assetAmount The number of assets to deposit
     * @param _sendParam Parameter that defines how to send the shares
     * @param _refundAddress Address to receive excess payment of the LZ fees
     * @notice This function first deposits the assets to mint shares, validates the shares meet minimum slippage requirements,
     *         then sends the minted shares cross-chain using the OFT (Omnichain Fungible Token) protocol
     * @notice The _sendParam.amountLD is updated to the actual share amount minted, and minAmountLD is reset to 0 for the send operation
     */
    function _depositAndSend(
        bytes32 _depositor,
        uint256 _assetAmount,
        SendParam memory _sendParam,
        address _refundAddress
    ) internal virtual {
        uint256 shareAmount = _deposit(_depositor, _assetAmount);
        _assertSlippage(shareAmount, _sendParam.minAmountLD);

        _sendParam.amountLD = shareAmount;
        _sendParam.minAmountLD = 0;

        _send(SHARE_OFT, _sendParam, _refundAddress);
        emit Deposited(_depositor, _sendParam.to, _sendParam.dstEid, _assetAmount, shareAmount);
    }

    /**
     * @dev Internal function to deposit assets into the vault
     * @param _assetAmount The number of assets to deposit into the vault
     * @return shareAmount The number of shares received from the vault deposit
     * @notice This function is expected to be overridden by the inheriting contract to implement custom/nonERC4626 deposit logic
     */
    function _deposit(bytes32 /*_depositor*/, uint256 _assetAmount) internal virtual returns (uint256 shareAmount) {
        shareAmount = VAULT.deposit(_assetAmount, address(this));
    }

    /**
     * @notice Redeems vault shares and sends the resulting assets to the user
     * @param _shareAmount The number of vault shares to redeem
     * @param _sendParam Parameter that defines how to send the assets
     * @param _refundAddress Address to receive excess payment of the LZ fees
     */
    function redeemAndSend(
        uint256 _shareAmount,
        SendParam memory _sendParam,
        address _refundAddress
    ) external payable virtual nonReentrant {
        IERC20(SHARE_ERC20).safeTransferFrom(msg.sender, address(this), _shareAmount);
        _redeemAndSend(OFTComposeMsgCodec.addressToBytes32(msg.sender), _shareAmount, _sendParam, _refundAddress);
    }

    /**
     * @dev Internal function that redeems shares for assets and sends them cross-chain
     * @param _redeemer The address of the redeemer in bytes32 format
     * @param _shareAmount The number of shares to redeem
     * @param _sendParam Parameter that defines how to send the assets
     * @param _refundAddress Address to receive excess payment of the LZ fees
     * @notice This function first redeems the specified share amount for the underlying asset,
     *         validates the received amount against slippage protection, then initiates a cross-chain
     *         transfer of the redeemed assets using the OFT (Omnichain Fungible Token) protocol
     * @notice The minAmountLD in _sendParam is reset to 0 after slippage validation since the
     *         actual amount has already been verified
     */
    function _redeemAndSend(
        bytes32 _redeemer,
        uint256 _shareAmount,
        SendParam memory _sendParam,
        address _refundAddress
    ) internal virtual {
        uint256 assetAmount = _redeem(_redeemer, _shareAmount);
        _assertSlippage(assetAmount, _sendParam.minAmountLD);

        _sendParam.amountLD = assetAmount;
        _sendParam.minAmountLD = 0;

        _send(ASSET_OFT, _sendParam, _refundAddress);
        emit Redeemed(_redeemer, _sendParam.to, _sendParam.dstEid, _shareAmount, assetAmount);
    }

    /**
     * @dev Internal function to redeem shares from the vault
     * @param _shareAmount The number of shares to redeem from the vault
     * @return assetAmount The number of assets received from the vault redemption
     * @notice This function is expected to be overridden by the inheriting contract to implement custom/nonERC4626 redemption logic
     */
    function _redeem(bytes32 /*_redeemer*/, uint256 _shareAmount) internal virtual returns (uint256 assetAmount) {
        assetAmount = VAULT.redeem(_shareAmount, address(this), address(this));
    }

    /**
     * @param _amountLD The amount of tokens to send
     * @param _minAmountLD The minimum amount of tokens that must be sent to avoid slippage
     * @notice This function checks if the amount sent is less than the minimum amount
     *         If it is, it reverts with SlippageExceeded error
     * @notice This function can be overridden to implement custom slippage logic
     */
    function _assertSlippage(uint256 _amountLD, uint256 _minAmountLD) internal view virtual {
        if (_amountLD < _minAmountLD) revert SlippageExceeded(_amountLD, _minAmountLD);
    }

    /**
     * @notice Quotes the send operation for the given OFT and SendParam
     * @dev Revert on slippage will be thrown by the OFT and not _assertSlippage
     * @param _from The "sender address" used for the quote
     * @param _targetOFT The OFT contract address to quote
     * @param _vaultInAmount The amount of tokens to send to the vault
     * @param _sendParam The parameters for the send operation
     * @return MessagingFee The estimated fee for the send operation
     * @dev This function can be overridden to implement custom quoting logic
     */
    function quoteSend(
        address _from,
        address _targetOFT,
        uint256 _vaultInAmount,
        SendParam memory _sendParam
    ) external view virtual returns (MessagingFee memory) {
        /// @dev When quoting the asset OFT, the function input is shares and the SendParam.amountLD into quoteSend() should be assets (and vice versa)

        if (_targetOFT == ASSET_OFT) {
            uint256 maxRedeem = VAULT.maxRedeem(_from);
            if (_vaultInAmount > maxRedeem) {
                revert ERC4626.ERC4626ExceededMaxRedeem(_from, _vaultInAmount, maxRedeem);
            }

            _sendParam.amountLD = VAULT.previewRedeem(_vaultInAmount);
        } else {
            uint256 maxDeposit = VAULT.maxDeposit(_from);
            if (_vaultInAmount > maxDeposit) {
                revert ERC4626.ERC4626ExceededMaxDeposit(_from, _vaultInAmount, maxDeposit);
            }

            _sendParam.amountLD = VAULT.previewDeposit(_vaultInAmount);
        }
        return IOFT(_targetOFT).quoteSend(_sendParam, false);
    }

    /**
     * @dev Internal function that handles token transfer to the recipient
     * @dev If the destination eid is the same as the current eid, it transfers the tokens directly to the recipient
     * @dev If the destination eid is different, it sends a LayerZero cross-chain transaction
     * @param _oft The OFT contract address to use for sending
     * @param _sendParam The parameters for the send operation
     * @param _refundAddress Address to receive excess payment of the LZ fees
     */
    function _send(address _oft, SendParam memory _sendParam, address _refundAddress) internal {
        if (_sendParam.dstEid == VAULT_EID) {
            /// @dev Can do this because _oft is validated before this function is called
            address erc20 = _oft == ASSET_OFT ? ASSET_ERC20 : SHARE_ERC20;

            if (msg.value > 0) revert NoMsgValueExpected();
            IERC20(erc20).safeTransfer(_sendParam.to.bytes32ToAddress(), _sendParam.amountLD);
        } else {
            // crosschain send
            IOFT(_oft).send{ value: msg.value }(_sendParam, MessagingFee(msg.value, 0), _refundAddress);
        }
    }

    /**
     * @dev Internal function to refund input tokens to sender on source during a failed transaction
     * @param _oft The OFT contract address used for refunding
     * @param _message The original message that was sent
     * @param _amount The amount of tokens to refund
     * @param _refundAddress Address to receive the refund
     */
    function _refund(address _oft, bytes calldata _message, uint256 _amount, address _refundAddress) internal virtual {
        /// @dev Extracted from the _message header. Will always be part of the _message since it is created by lzReceive
        SendParam memory refundSendParam;
        refundSendParam.dstEid = OFTComposeMsgCodec.srcEid(_message);
        refundSendParam.to = OFTComposeMsgCodec.composeFrom(_message);
        refundSendParam.amountLD = _amount;

        IOFT(_oft).send{ value: msg.value }(refundSendParam, MessagingFee(msg.value, 0), _refundAddress);
    }

    receive() external payable {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {Context} from "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/draft-IERC6093.sol)
pragma solidity >=0.8.4;

/**
 * @dev Standard ERC-20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC-721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in ERC-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC-1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC1363.sol)

pragma solidity >=0.6.2;

import {IERC20} from "./IERC20.sol";
import {IERC165} from "./IERC165.sol";

/**
 * @title IERC1363
 * @dev Interface of the ERC-1363 standard as defined in the https://eips.ethereum.org/EIPS/eip-1363[ERC-1363].
 *
 * Defines an extension interface for ERC-20 tokens that supports executing code on a recipient contract
 * after `transfer` or `transferFrom`, or code on a spender contract after `approve`, in a single transaction.
 */
interface IERC1363 is IERC20, IERC165 {
    /*
     * Note: the ERC-165 identifier for this interface is 0xb0202a11.
     * 0xb0202a11 ===
     *   bytes4(keccak256('transferAndCall(address,uint256)')) ^
     *   bytes4(keccak256('transferAndCall(address,uint256,bytes)')) ^
     *   bytes4(keccak256('transferFromAndCall(address,address,uint256)')) ^
     *   bytes4(keccak256('transferFromAndCall(address,address,uint256,bytes)')) ^
     *   bytes4(keccak256('approveAndCall(address,uint256)')) ^
     *   bytes4(keccak256('approveAndCall(address,uint256,bytes)'))
     */

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferAndCall(address to, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @param data Additional data with no specified format, sent in call to `to`.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferAndCall(address to, uint256 value, bytes calldata data) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param from The address which you want to send tokens from.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferFromAndCall(address from, address to, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism
     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.
     * @param from The address which you want to send tokens from.
     * @param to The address which you want to transfer to.
     * @param value The amount of tokens to be transferred.
     * @param data Additional data with no specified format, sent in call to `to`.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function transferFromAndCall(address from, address to, uint256 value, bytes calldata data) external returns (bool);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function approveAndCall(address spender, uint256 value) external returns (bool);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     * @param data Additional data with no specified format, sent in call to `spender`.
     * @return A boolean value indicating whether the operation succeeded unless throwing.
     */
    function approveAndCall(address spender, uint256 value, bytes calldata data) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC165.sol)

pragma solidity >=0.4.16;

import {IERC165} from "../utils/introspection/IERC165.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC20.sol)

pragma solidity >=0.4.16;

import {IERC20} from "../token/ERC20/IERC20.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC4626.sol)

pragma solidity >=0.6.2;

import {IERC20} from "../token/ERC20/IERC20.sol";
import {IERC20Metadata} from "../token/ERC20/extensions/IERC20Metadata.sol";

/**
 * @dev Interface of the ERC-4626 "Tokenized Vault Standard", as defined in
 * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].
 */
interface IERC4626 is IERC20, IERC20Metadata {
    event Deposit(address indexed sender, address indexed owner, uint256 assets, uint256 shares);

    event Withdraw(
        address indexed sender,
        address indexed receiver,
        address indexed owner,
        uint256 assets,
        uint256 shares
    );

    /**
     * @dev Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.
     *
     * - MUST be an ERC-20 token contract.
     * - MUST NOT revert.
     */
    function asset() external view returns (address assetTokenAddress);

    /**
     * @dev Returns the total amount of the underlying asset that is “managed” by Vault.
     *
     * - SHOULD include any compounding that occurs from yield.
     * - MUST be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT revert.
     */
    function totalAssets() external view returns (uint256 totalManagedAssets);

    /**
     * @dev Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToShares(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToAssets(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,
     * through a deposit call.
     *
     * - MUST return a limited value if receiver is subject to some deposit limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
     * - MUST NOT revert.
     */
    function maxDeposit(address receiver) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit
     *   call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called
     *   in the same transaction.
     * - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
     *   deposit would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewDeposit(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   deposit execution, and are accounted for during deposit.
     * - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function deposit(uint256 assets, address receiver) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.
     * - MUST return a limited value if receiver is subject to some mint limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
     * - MUST NOT revert.
     */
    function maxMint(address receiver) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
     *   in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the
     *   same transaction.
     * - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
     *   would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by minting.
     */
    function previewMint(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint
     *   execution, and are accounted for during mint.
     * - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function mint(uint256 shares, address receiver) external returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the
     * Vault, through a withdraw call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxWithdraw(address owner) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw
     *   call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if
     *   called
     *   in the same transaction.
     * - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though
     *   the withdrawal would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewWithdraw(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Burns shares from owner and sends exactly assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   withdraw execution, and are accounted for during withdraw.
     * - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function withdraw(uint256 assets, address receiver, address owner) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,
     * through a redeem call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxRedeem(address owner) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their redemption at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call
     *   in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the
     *   same transaction.
     * - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the
     *   redemption would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by redeeming.
     */
    function previewRedeem(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Burns exactly shares from owner and sends assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   redeem execution, and are accounted for during redeem.
     * - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function redeem(uint256 shares, address receiver, address owner) external returns (uint256 assets);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "./IERC20.sol";
import {IERC20Metadata} from "./extensions/IERC20Metadata.sol";
import {Context} from "../../utils/Context.sol";
import {IERC20Errors} from "../../interfaces/draft-IERC6093.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC-20
 * applications.
 */
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
    mapping(address account => uint256) private _balances;

    mapping(address account => mapping(address spender => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * Both values are immutable: they can only be set once during construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /// @inheritdoc IERC20
    function totalSupply() public view virtual returns (uint256) {
        return _totalSupply;
    }

    /// @inheritdoc IERC20
    function balanceOf(address account) public view virtual returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /// @inheritdoc IERC20
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Skips emitting an {Approval} event indicating an allowance update. This is not
     * required by the ERC. See {xref-ERC20-_approve-address-address-uint256-bool-}[_approve].
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            _totalSupply += value;
        } else {
            uint256 fromBalance = _balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                _balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                _totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                _balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner`'s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     *
     * ```solidity
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        _allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner`'s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance < type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/extensions/ERC4626.sol)

pragma solidity ^0.8.20;

import {IERC20, IERC20Metadata, ERC20} from "../ERC20.sol";
import {SafeERC20} from "../utils/SafeERC20.sol";
import {IERC4626} from "../../../interfaces/IERC4626.sol";
import {Math} from "../../../utils/math/Math.sol";

/**
 * @dev Implementation of the ERC-4626 "Tokenized Vault Standard" as defined in
 * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].
 *
 * This extension allows the minting and burning of "shares" (represented using the ERC-20 inheritance) in exchange for
 * underlying "assets" through standardized {deposit}, {mint}, {redeem} and {burn} workflows. This contract extends
 * the ERC-20 standard. Any additional extensions included along it would affect the "shares" token represented by this
 * contract and not the "assets" token which is an independent contract.
 *
 * [CAUTION]
 * ====
 * In empty (or nearly empty) ERC-4626 vaults, deposits are at high risk of being stolen through frontrunning
 * with a "donation" to the vault that inflates the price of a share. This is variously known as a donation or inflation
 * attack and is essentially a problem of slippage. Vault deployers can protect against this attack by making an initial
 * deposit of a non-trivial amount of the asset, such that price manipulation becomes infeasible. Withdrawals may
 * similarly be affected by slippage. Users can protect against this attack as well as unexpected slippage in general by
 * verifying the amount received is as expected, using a wrapper that performs these checks such as
 * https://github.com/fei-protocol/ERC4626#erc4626router-and-base[ERC4626Router].
 *
 * Since v4.9, this implementation introduces configurable virtual assets and shares to help developers mitigate that risk.
 * The `_decimalsOffset()` corresponds to an offset in the decimal representation between the underlying asset's decimals
 * and the vault decimals. This offset also determines the rate of virtual shares to virtual assets in the vault, which
 * itself determines the initial exchange rate. While not fully preventing the attack, analysis shows that the default
 * offset (0) makes it non-profitable even if an attacker is able to capture value from multiple user deposits, as a result
 * of the value being captured by the virtual shares (out of the attacker's donation) matching the attacker's expected gains.
 * With a larger offset, the attack becomes orders of magnitude more expensive than it is profitable. More details about the
 * underlying math can be found xref:ROOT:erc4626.adoc#inflation-attack[here].
 *
 * The drawback of this approach is that the virtual shares do capture (a very small) part of the value being accrued
 * to the vault. Also, if the vault experiences losses, the users try to exit the vault, the virtual shares and assets
 * will cause the first user to exit to experience reduced losses in detriment to the last users that will experience
 * bigger losses. Developers willing to revert back to the pre-v4.9 behavior just need to override the
 * `_convertToShares` and `_convertToAssets` functions.
 *
 * To learn more, check out our xref:ROOT:erc4626.adoc[ERC-4626 guide].
 * ====
 */
abstract contract ERC4626 is ERC20, IERC4626 {
    using Math for uint256;

    IERC20 private immutable _asset;
    uint8 private immutable _underlyingDecimals;

    /**
     * @dev Attempted to deposit more assets than the max amount for `receiver`.
     */
    error ERC4626ExceededMaxDeposit(address receiver, uint256 assets, uint256 max);

    /**
     * @dev Attempted to mint more shares than the max amount for `receiver`.
     */
    error ERC4626ExceededMaxMint(address receiver, uint256 shares, uint256 max);

    /**
     * @dev Attempted to withdraw more assets than the max amount for `receiver`.
     */
    error ERC4626ExceededMaxWithdraw(address owner, uint256 assets, uint256 max);

    /**
     * @dev Attempted to redeem more shares than the max amount for `receiver`.
     */
    error ERC4626ExceededMaxRedeem(address owner, uint256 shares, uint256 max);

    /**
     * @dev Set the underlying asset contract. This must be an ERC20-compatible contract (ERC-20 or ERC-777).
     */
    constructor(IERC20 asset_) {
        (bool success, uint8 assetDecimals) = _tryGetAssetDecimals(asset_);
        _underlyingDecimals = success ? assetDecimals : 18;
        _asset = asset_;
    }

    /**
     * @dev Attempts to fetch the asset decimals. A return value of false indicates that the attempt failed in some way.
     */
    function _tryGetAssetDecimals(IERC20 asset_) private view returns (bool ok, uint8 assetDecimals) {
        (bool success, bytes memory encodedDecimals) = address(asset_).staticcall(
            abi.encodeCall(IERC20Metadata.decimals, ())
        );
        if (success && encodedDecimals.length >= 32) {
            uint256 returnedDecimals = abi.decode(encodedDecimals, (uint256));
            if (returnedDecimals <= type(uint8).max) {
                return (true, uint8(returnedDecimals));
            }
        }
        return (false, 0);
    }

    /**
     * @dev Decimals are computed by adding the decimal offset on top of the underlying asset's decimals. This
     * "original" value is cached during construction of the vault contract. If this read operation fails (e.g., the
     * asset has not been created yet), a default of 18 is used to represent the underlying asset's decimals.
     *
     * See {IERC20Metadata-decimals}.
     */
    function decimals() public view virtual override(IERC20Metadata, ERC20) returns (uint8) {
        return _underlyingDecimals + _decimalsOffset();
    }

    /// @inheritdoc IERC4626
    function asset() public view virtual returns (address) {
        return address(_asset);
    }

    /// @inheritdoc IERC4626
    function totalAssets() public view virtual returns (uint256) {
        return IERC20(asset()).balanceOf(address(this));
    }

    /// @inheritdoc IERC4626
    function convertToShares(uint256 assets) public view virtual returns (uint256) {
        return _convertToShares(assets, Math.Rounding.Floor);
    }

    /// @inheritdoc IERC4626
    function convertToAssets(uint256 shares) public view virtual returns (uint256) {
        return _convertToAssets(shares, Math.Rounding.Floor);
    }

    /// @inheritdoc IERC4626
    function maxDeposit(address) public view virtual returns (uint256) {
        return type(uint256).max;
    }

    /// @inheritdoc IERC4626
    function maxMint(address) public view virtual returns (uint256) {
        return type(uint256).max;
    }

    /// @inheritdoc IERC4626
    function maxWithdraw(address owner) public view virtual returns (uint256) {
        return _convertToAssets(balanceOf(owner), Math.Rounding.Floor);
    }

    /// @inheritdoc IERC4626
    function maxRedeem(address owner) public view virtual returns (uint256) {
        return balanceOf(owner);
    }

    /// @inheritdoc IERC4626
    function previewDeposit(uint256 assets) public view virtual returns (uint256) {
        return _convertToShares(assets, Math.Rounding.Floor);
    }

    /// @inheritdoc IERC4626
    function previewMint(uint256 shares) public view virtual returns (uint256) {
        return _convertToAssets(shares, Math.Rounding.Ceil);
    }

    /// @inheritdoc IERC4626
    function previewWithdraw(uint256 assets) public view virtual returns (uint256) {
        return _convertToShares(assets, Math.Rounding.Ceil);
    }

    /// @inheritdoc IERC4626
    function previewRedeem(uint256 shares) public view virtual returns (uint256) {
        return _convertToAssets(shares, Math.Rounding.Floor);
    }

    /// @inheritdoc IERC4626
    function deposit(uint256 assets, address receiver) public virtual returns (uint256) {
        uint256 maxAssets = maxDeposit(receiver);
        if (assets > maxAssets) {
            revert ERC4626ExceededMaxDeposit(receiver, assets, maxAssets);
        }

        uint256 shares = previewDeposit(assets);
        _deposit(_msgSender(), receiver, assets, shares);

        return shares;
    }

    /// @inheritdoc IERC4626
    function mint(uint256 shares, address receiver) public virtual returns (uint256) {
        uint256 maxShares = maxMint(receiver);
        if (shares > maxShares) {
            revert ERC4626ExceededMaxMint(receiver, shares, maxShares);
        }

        uint256 assets = previewMint(shares);
        _deposit(_msgSender(), receiver, assets, shares);

        return assets;
    }

    /// @inheritdoc IERC4626
    function withdraw(uint256 assets, address receiver, address owner) public virtual returns (uint256) {
        uint256 maxAssets = maxWithdraw(owner);
        if (assets > maxAssets) {
            revert ERC4626ExceededMaxWithdraw(owner, assets, maxAssets);
        }

        uint256 shares = previewWithdraw(assets);
        _withdraw(_msgSender(), receiver, owner, assets, shares);

        return shares;
    }

    /// @inheritdoc IERC4626
    function redeem(uint256 shares, address receiver, address owner) public virtual returns (uint256) {
        uint256 maxShares = maxRedeem(owner);
        if (shares > maxShares) {
            revert ERC4626ExceededMaxRedeem(owner, shares, maxShares);
        }

        uint256 assets = previewRedeem(shares);
        _withdraw(_msgSender(), receiver, owner, assets, shares);

        return assets;
    }

    /**
     * @dev Internal conversion function (from assets to shares) with support for rounding direction.
     */
    function _convertToShares(uint256 assets, Math.Rounding rounding) internal view virtual returns (uint256) {
        return assets.mulDiv(totalSupply() + 10 ** _decimalsOffset(), totalAssets() + 1, rounding);
    }

    /**
     * @dev Internal conversion function (from shares to assets) with support for rounding direction.
     */
    function _convertToAssets(uint256 shares, Math.Rounding rounding) internal view virtual returns (uint256) {
        return shares.mulDiv(totalAssets() + 1, totalSupply() + 10 ** _decimalsOffset(), rounding);
    }

    /**
     * @dev Deposit/mint common workflow.
     */
    function _deposit(address caller, address receiver, uint256 assets, uint256 shares) internal virtual {
        // If asset() is ERC-777, `transferFrom` can trigger a reentrancy BEFORE the transfer happens through the
        // `tokensToSend` hook. On the other hand, the `tokenReceived` hook, that is triggered after the transfer,
        // calls the vault, which is assumed not malicious.
        //
        // Conclusion: we need to do the transfer before we mint so that any reentrancy would happen before the
        // assets are transferred and before the shares are minted, which is a valid state.
        // slither-disable-next-line reentrancy-no-eth
        SafeERC20.safeTransferFrom(IERC20(asset()), caller, address(this), assets);
        _mint(receiver, shares);

        emit Deposit(caller, receiver, assets, shares);
    }

    /**
     * @dev Withdraw/redeem common workflow.
     */
    function _withdraw(
        address caller,
        address receiver,
        address owner,
        uint256 assets,
        uint256 shares
    ) internal virtual {
        if (caller != owner) {
            _spendAllowance(owner, caller, shares);
        }

        // If asset() is ERC-777, `transfer` can trigger a reentrancy AFTER the transfer happens through the
        // `tokensReceived` hook. On the other hand, the `tokensToSend` hook, that is triggered before the transfer,
        // calls the vault, which is assumed not malicious.
        //
        // Conclusion: we need to do the transfer after the burn so that any reentrancy would happen after the
        // shares are burned and after the assets are transferred, which is a valid state.
        _burn(owner, shares);
        SafeERC20.safeTransfer(IERC20(asset()), receiver, assets);

        emit Withdraw(caller, receiver, owner, assets, shares);
    }

    function _decimalsOffset() internal view virtual returns (uint8) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity >=0.6.2;

import {IERC20} from "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC-20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/IERC20.sol)

pragma solidity >=0.4.16;

/**
 * @dev Interface of the ERC-20 standard as defined in the ERC.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC1363} from "../../../interfaces/IERC1363.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC-20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    /**
     * @dev An operation with an ERC-20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Variant of {safeTransfer} that returns a bool instead of reverting if the operation is not successful.
     */
    function trySafeTransfer(IERC20 token, address to, uint256 value) internal returns (bool) {
        return _callOptionalReturnBool(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Variant of {safeTransferFrom} that returns a bool instead of reverting if the operation is not successful.
     */
    function trySafeTransferFrom(IERC20 token, address from, address to, uint256 value) internal returns (bool) {
        return _callOptionalReturnBool(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     *
     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the "client"
     * smart contract uses ERC-7674 to set temporary allowances, then the "client" smart contract should avoid using
     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract
     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     *
     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the "client"
     * smart contract uses ERC-7674 to set temporary allowances, then the "client" smart contract should avoid using
     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract
     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     *
     * NOTE: If the token implements ERC-7674, this function will not modify any temporary allowance. This function
     * only sets the "standard" allowance. Any temporary allowance will remain active, in addition to the value being
     * set here.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Performs an {ERC1363} transferAndCall, with a fallback to the simple {ERC20} transfer if the target has no
     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * Reverts if the returned value is other than `true`.
     */
    function transferAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {
        if (to.code.length == 0) {
            safeTransfer(token, to, value);
        } else if (!token.transferAndCall(to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Performs an {ERC1363} transferFromAndCall, with a fallback to the simple {ERC20} transferFrom if the target
     * has no code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * Reverts if the returned value is other than `true`.
     */
    function transferFromAndCallRelaxed(
        IERC1363 token,
        address from,
        address to,
        uint256 value,
        bytes memory data
    ) internal {
        if (to.code.length == 0) {
            safeTransferFrom(token, from, to, value);
        } else if (!token.transferFromAndCall(from, to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Performs an {ERC1363} approveAndCall, with a fallback to the simple {ERC20} approve if the target has no
     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when
     * targeting contracts.
     *
     * NOTE: When the recipient address (`to`) has no code (i.e. is an EOA), this function behaves as {forceApprove}.
     * Opposedly, when the recipient address (`to`) has code, this function only attempts to call {ERC1363-approveAndCall}
     * once without retrying, and relies on the returned value to be true.
     *
     * Reverts if the returned value is other than `true`.
     */
    function approveAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {
        if (to.code.length == 0) {
            forceApprove(token, to, value);
        } else if (!token.approveAndCall(to, value, data)) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturnBool} that reverts if call fails to meet the requirements.
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        uint256 returnSize;
        uint256 returnValue;
        assembly ("memory-safe") {
            let success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)
            // bubble errors
            if iszero(success) {
                let ptr := mload(0x40)
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
            returnSize := returndatasize()
            returnValue := mload(0)
        }

        if (returnSize == 0 ? address(token).code.length == 0 : returnValue != 1) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silently catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        bool success;
        uint256 returnSize;
        uint256 returnValue;
        assembly ("memory-safe") {
            success := call(gas(), token, 0, add(data, 0x20), mload(data), 0, 0x20)
            returnSize := returndatasize()
            returnValue := mload(0)
        }
        return success && (returnSize == 0 ? address(token).code.length > 0 : returnValue == 1);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.4.0) (utils/introspection/IERC165.sol)

pragma solidity >=0.4.16;

/**
 * @dev Interface of the ERC-165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[ERC].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[ERC section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.3.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

import {Panic} from "../Panic.sol";
import {SafeCast} from "./SafeCast.sol";

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Return the 512-bit addition of two uint256.
     *
     * The result is stored in two 256 variables such that sum = high * 2²⁵⁶ + low.
     */
    function add512(uint256 a, uint256 b) internal pure returns (uint256 high, uint256 low) {
        assembly ("memory-safe") {
            low := add(a, b)
            high := lt(low, a)
        }
    }

    /**
     * @dev Return the 512-bit multiplication of two uint256.
     *
     * The result is stored in two 256 variables such that product = high * 2²⁵⁶ + low.
     */
    function mul512(uint256 a, uint256 b) internal pure returns (uint256 high, uint256 low) {
        // 512-bit multiply [high low] = x * y. Compute the product mod 2²⁵⁶ and mod 2²⁵⁶ - 1, then use
        // the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
        // variables such that product = high * 2²⁵⁶ + low.
        assembly ("memory-safe") {
            let mm := mulmod(a, b, not(0))
            low := mul(a, b)
            high := sub(sub(mm, low), lt(mm, low))
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, with a success flag (no overflow).
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            uint256 c = a + b;
            success = c >= a;
            result = c * SafeCast.toUint(success);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with a success flag (no overflow).
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            uint256 c = a - b;
            success = c <= a;
            result = c * SafeCast.toUint(success);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with a success flag (no overflow).
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            uint256 c = a * b;
            assembly ("memory-safe") {
                // Only true when the multiplication doesn't overflow
                // (c / a == b) || (a == 0)
                success := or(eq(div(c, a), b), iszero(a))
            }
            // equivalent to: success ? c : 0
            result = c * SafeCast.toUint(success);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a success flag (no division by zero).
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            success = b > 0;
            assembly ("memory-safe") {
                // The `DIV` opcode returns zero when the denominator is 0.
                result := div(a, b)
            }
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a success flag (no division by zero).
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            success = b > 0;
            assembly ("memory-safe") {
                // The `MOD` opcode returns zero when the denominator is 0.
                result := mod(a, b)
            }
        }
    }

    /**
     * @dev Unsigned saturating addition, bounds to `2²⁵⁶ - 1` instead of overflowing.
     */
    function saturatingAdd(uint256 a, uint256 b) internal pure returns (uint256) {
        (bool success, uint256 result) = tryAdd(a, b);
        return ternary(success, result, type(uint256).max);
    }

    /**
     * @dev Unsigned saturating subtraction, bounds to zero instead of overflowing.
     */
    function saturatingSub(uint256 a, uint256 b) internal pure returns (uint256) {
        (, uint256 result) = trySub(a, b);
        return result;
    }

    /**
     * @dev Unsigned saturating multiplication, bounds to `2²⁵⁶ - 1` instead of overflowing.
     */
    function saturatingMul(uint256 a, uint256 b) internal pure returns (uint256) {
        (bool success, uint256 result) = tryMul(a, b);
        return ternary(success, result, type(uint256).max);
    }

    /**
     * @dev Branchless ternary evaluation for `a ? b : c`. Gas costs are constant.
     *
     * IMPORTANT: This function may reduce bytecode size and consume less gas when used standalone.
     * However, the compiler may optimize Solidity ternary operations (i.e. `a ? b : c`) to only compute
     * one branch when needed, making this function more expensive.
     */
    function ternary(bool condition, uint256 a, uint256 b) internal pure returns (uint256) {
        unchecked {
            // branchless ternary works because:
            // b ^ (a ^ b) == a
            // b ^ 0 == b
            return b ^ ((a ^ b) * SafeCast.toUint(condition));
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return ternary(a > b, a, b);
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return ternary(a < b, a, b);
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            Panic.panic(Panic.DIVISION_BY_ZERO);
        }

        // The following calculation ensures accurate ceiling division without overflow.
        // Since a is non-zero, (a - 1) / b will not overflow.
        // The largest possible result occurs when (a - 1) / b is type(uint256).max,
        // but the largest value we can obtain is type(uint256).max - 1, which happens
        // when a = type(uint256).max and b = 1.
        unchecked {
            return SafeCast.toUint(a > 0) * ((a - 1) / b + 1);
        }
    }

    /**
     * @dev Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     *
     * Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            (uint256 high, uint256 low) = mul512(x, y);

            // Handle non-overflow cases, 256 by 256 division.
            if (high == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return low / denominator;
            }

            // Make sure the result is less than 2²⁵⁶. Also prevents denominator == 0.
            if (denominator <= high) {
                Panic.panic(ternary(denominator == 0, Panic.DIVISION_BY_ZERO, Panic.UNDER_OVERFLOW));
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [high low].
            uint256 remainder;
            assembly ("memory-safe") {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                high := sub(high, gt(remainder, low))
                low := sub(low, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly ("memory-safe") {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [high low] by twos.
                low := div(low, twos)

                // Flip twos such that it is 2²⁵⁶ / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from high into low.
            low |= high * twos;

            // Invert denominator mod 2²⁵⁶. Now that denominator is an odd number, it has an inverse modulo 2²⁵⁶ such
            // that denominator * inv ≡ 1 mod 2²⁵⁶. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv ≡ 1 mod 2⁴.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2⁸
            inverse *= 2 - denominator * inverse; // inverse mod 2¹⁶
            inverse *= 2 - denominator * inverse; // inverse mod 2³²
            inverse *= 2 - denominator * inverse; // inverse mod 2⁶⁴
            inverse *= 2 - denominator * inverse; // inverse mod 2¹²⁸
            inverse *= 2 - denominator * inverse; // inverse mod 2²⁵⁶

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2²⁵⁶. Since the preconditions guarantee that the outcome is
            // less than 2²⁵⁶, this is the final result. We don't need to compute the high bits of the result and high
            // is no longer required.
            result = low * inverse;
            return result;
        }
    }

    /**
     * @dev Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        return mulDiv(x, y, denominator) + SafeCast.toUint(unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0);
    }

    /**
     * @dev Calculates floor(x * y >> n) with full precision. Throws if result overflows a uint256.
     */
    function mulShr(uint256 x, uint256 y, uint8 n) internal pure returns (uint256 result) {
        unchecked {
            (uint256 high, uint256 low) = mul512(x, y);
            if (high >= 1 << n) {
                Panic.panic(Panic.UNDER_OVERFLOW);
            }
            return (high << (256 - n)) | (low >> n);
        }
    }

    /**
     * @dev Calculates x * y >> n with full precision, following the selected rounding direction.
     */
    function mulShr(uint256 x, uint256 y, uint8 n, Rounding rounding) internal pure returns (uint256) {
        return mulShr(x, y, n) + SafeCast.toUint(unsignedRoundsUp(rounding) && mulmod(x, y, 1 << n) > 0);
    }

    /**
     * @dev Calculate the modular multiplicative inverse of a number in Z/nZ.
     *
     * If n is a prime, then Z/nZ is a field. In that case all elements are inversible, except 0.
     * If n is not a prime, then Z/nZ is not a field, and some elements might not be inversible.
     *
     * If the input value is not inversible, 0 is returned.
     *
     * NOTE: If you know for sure that n is (big) a prime, it may be cheaper to use Fermat's little theorem and get the
     * inverse using `Math.modExp(a, n - 2, n)`. See {invModPrime}.
     */
    function invMod(uint256 a, uint256 n) internal pure returns (uint256) {
        unchecked {
            if (n == 0) return 0;

            // The inverse modulo is calculated using the Extended Euclidean Algorithm (iterative version)
            // Used to compute integers x and y such that: ax + ny = gcd(a, n).
            // When the gcd is 1, then the inverse of a modulo n exists and it's x.
            // ax + ny = 1
            // ax = 1 + (-y)n
            // ax ≡ 1 (mod n) # x is the inverse of a modulo n

            // If the remainder is 0 the gcd is n right away.
            uint256 remainder = a % n;
            uint256 gcd = n;

            // Therefore the initial coefficients are:
            // ax + ny = gcd(a, n) = n
            // 0a + 1n = n
            int256 x = 0;
            int256 y = 1;

            while (remainder != 0) {
                uint256 quotient = gcd / remainder;

                (gcd, remainder) = (
                    // The old remainder is the next gcd to try.
                    remainder,
                    // Compute the next remainder.
                    // Can't overflow given that (a % gcd) * (gcd // (a % gcd)) <= gcd
                    // where gcd is at most n (capped to type(uint256).max)
                    gcd - remainder * quotient
                );

                (x, y) = (
                    // Increment the coefficient of a.
                    y,
                    // Decrement the coefficient of n.
                    // Can overflow, but the result is casted to uint256 so that the
                    // next value of y is "wrapped around" to a value between 0 and n - 1.
                    x - y * int256(quotient)
                );
            }

            if (gcd != 1) return 0; // No inverse exists.
            return ternary(x < 0, n - uint256(-x), uint256(x)); // Wrap the result if it's negative.
        }
    }

    /**
     * @dev Variant of {invMod}. More efficient, but only works if `p` is known to be a prime greater than `2`.
     *
     * From https://en.wikipedia.org/wiki/Fermat%27s_little_theorem[Fermat's little theorem], we know that if p is
     * prime, then `a**(p-1) ≡ 1 mod p`. As a consequence, we have `a * a**(p-2) ≡ 1 mod p`, which means that
     * `a**(p-2)` is the modular multiplicative inverse of a in Fp.
     *
     * NOTE: this function does NOT check that `p` is a prime greater than `2`.
     */
    function invModPrime(uint256 a, uint256 p) internal view returns (uint256) {
        unchecked {
            return Math.modExp(a, p - 2, p);
        }
    }

    /**
     * @dev Returns the modular exponentiation of the specified base, exponent and modulus (b ** e % m)
     *
     * Requirements:
     * - modulus can't be zero
     * - underlying staticcall to precompile must succeed
     *
     * IMPORTANT: The result is only valid if the underlying call succeeds. When using this function, make
     * sure the chain you're using it on supports the precompiled contract for modular exponentiation
     * at address 0x05 as specified in https://eips.ethereum.org/EIPS/eip-198[EIP-198]. Otherwise,
     * the underlying function will succeed given the lack of a revert, but the result may be incorrectly
     * interpreted as 0.
     */
    function modExp(uint256 b, uint256 e, uint256 m) internal view returns (uint256) {
        (bool success, uint256 result) = tryModExp(b, e, m);
        if (!success) {
            Panic.panic(Panic.DIVISION_BY_ZERO);
        }
        return result;
    }

    /**
     * @dev Returns the modular exponentiation of the specified base, exponent and modulus (b ** e % m).
     * It includes a success flag indicating if the operation succeeded. Operation will be marked as failed if trying
     * to operate modulo 0 or if the underlying precompile reverted.
     *
     * IMPORTANT: The result is only valid if the success flag is true. When using this function, make sure the chain
     * you're using it on supports the precompiled contract for modular exponentiation at address 0x05 as specified in
     * https://eips.ethereum.org/EIPS/eip-198[EIP-198]. Otherwise, the underlying function will succeed given the lack
     * of a revert, but the result may be incorrectly interpreted as 0.
     */
    function tryModExp(uint256 b, uint256 e, uint256 m) internal view returns (bool success, uint256 result) {
        if (m == 0) return (false, 0);
        assembly ("memory-safe") {
            let ptr := mload(0x40)
            // | Offset    | Content    | Content (Hex)                                                      |
            // |-----------|------------|--------------------------------------------------------------------|
            // | 0x00:0x1f | size of b  | 0x0000000000000000000000000000000000000000000000000000000000000020 |
            // | 0x20:0x3f | size of e  | 0x0000000000000000000000000000000000000000000000000000000000000020 |
            // | 0x40:0x5f | size of m  | 0x0000000000000000000000000000000000000000000000000000000000000020 |
            // | 0x60:0x7f | value of b | 0x<.............................................................b> |
            // | 0x80:0x9f | value of e | 0x<.............................................................e> |
            // | 0xa0:0xbf | value of m | 0x<.............................................................m> |
            mstore(ptr, 0x20)
            mstore(add(ptr, 0x20), 0x20)
            mstore(add(ptr, 0x40), 0x20)
            mstore(add(ptr, 0x60), b)
            mstore(add(ptr, 0x80), e)
            mstore(add(ptr, 0xa0), m)

            // Given the result < m, it's guaranteed to fit in 32 bytes,
            // so we can use the memory scratch space located at offset 0.
            success := staticcall(gas(), 0x05, ptr, 0xc0, 0x00, 0x20)
            result := mload(0x00)
        }
    }

    /**
     * @dev Variant of {modExp} that supports inputs of arbitrary length.
     */
    function modExp(bytes memory b, bytes memory e, bytes memory m) internal view returns (bytes memory) {
        (bool success, bytes memory result) = tryModExp(b, e, m);
        if (!success) {
            Panic.panic(Panic.DIVISION_BY_ZERO);
        }
        return result;
    }

    /**
     * @dev Variant of {tryModExp} that supports inputs of arbitrary length.
     */
    function tryModExp(
        bytes memory b,
        bytes memory e,
        bytes memory m
    ) internal view returns (bool success, bytes memory result) {
        if (_zeroBytes(m)) return (false, new bytes(0));

        uint256 mLen = m.length;

        // Encode call args in result and move the free memory pointer
        result = abi.encodePacked(b.length, e.length, mLen, b, e, m);

        assembly ("memory-safe") {
            let dataPtr := add(result, 0x20)
            // Write result on top of args to avoid allocating extra memory.
            success := staticcall(gas(), 0x05, dataPtr, mload(result), dataPtr, mLen)
            // Overwrite the length.
            // result.length > returndatasize() is guaranteed because returndatasize() == m.length
            mstore(result, mLen)
            // Set the memory pointer after the returned data.
            mstore(0x40, add(dataPtr, mLen))
        }
    }

    /**
     * @dev Returns whether the provided byte array is zero.
     */
    function _zeroBytes(bytes memory byteArray) private pure returns (bool) {
        for (uint256 i = 0; i < byteArray.length; ++i) {
            if (byteArray[i] != 0) {
                return false;
            }
        }
        return true;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * This method is based on Newton's method for computing square roots; the algorithm is restricted to only
     * using integer operations.
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        unchecked {
            // Take care of easy edge cases when a == 0 or a == 1
            if (a <= 1) {
                return a;
            }

            // In this function, we use Newton's method to get a root of `f(x) := x² - a`. It involves building a
            // sequence x_n that converges toward sqrt(a). For each iteration x_n, we also define the error between
            // the current value as `ε_n = | x_n - sqrt(a) |`.
            //
            // For our first estimation, we consider `e` the smallest power of 2 which is bigger than the square root
            // of the target. (i.e. `2**(e-1) ≤ sqrt(a) < 2**e`). We know that `e ≤ 128` because `(2¹²⁸)² = 2²⁵⁶` is
            // bigger than any uint256.
            //
            // By noticing that
            // `2**(e-1) ≤ sqrt(a) < 2**e → (2**(e-1))² ≤ a < (2**e)² → 2**(2*e-2) ≤ a < 2**(2*e)`
            // we can deduce that `e - 1` is `log2(a) / 2`. We can thus compute `x_n = 2**(e-1)` using a method similar
            // to the msb function.
            uint256 aa = a;
            uint256 xn = 1;

            if (aa >= (1 << 128)) {
                aa >>= 128;
                xn <<= 64;
            }
            if (aa >= (1 << 64)) {
                aa >>= 64;
                xn <<= 32;
            }
            if (aa >= (1 << 32)) {
                aa >>= 32;
                xn <<= 16;
            }
            if (aa >= (1 << 16)) {
                aa >>= 16;
                xn <<= 8;
            }
            if (aa >= (1 << 8)) {
                aa >>= 8;
                xn <<= 4;
            }
            if (aa >= (1 << 4)) {
                aa >>= 4;
                xn <<= 2;
            }
            if (aa >= (1 << 2)) {
                xn <<= 1;
            }

            // We now have x_n such that `x_n = 2**(e-1) ≤ sqrt(a) < 2**e = 2 * x_n`. This implies ε_n ≤ 2**(e-1).
            //
            // We can refine our estimation by noticing that the middle of that interval minimizes the error.
            // If we move x_n to equal 2**(e-1) + 2**(e-2), then we reduce the error to ε_n ≤ 2**(e-2).
            // This is going to be our x_0 (and ε_0)
            xn = (3 * xn) >> 1; // ε_0 := | x_0 - sqrt(a) | ≤ 2**(e-2)

            // From here, Newton's method give us:
            // x_{n+1} = (x_n + a / x_n) / 2
            //
            // One should note that:
            // x_{n+1}² - a = ((x_n + a / x_n) / 2)² - a
            //              = ((x_n² + a) / (2 * x_n))² - a
            //              = (x_n⁴ + 2 * a * x_n² + a²) / (4 * x_n²) - a
            //              = (x_n⁴ + 2 * a * x_n² + a² - 4 * a * x_n²) / (4 * x_n²)
            //              = (x_n⁴ - 2 * a * x_n² + a²) / (4 * x_n²)
            //              = (x_n² - a)² / (2 * x_n)²
            //              = ((x_n² - a) / (2 * x_n))²
            //              ≥ 0
            // Which proves that for all n ≥ 1, sqrt(a) ≤ x_n
            //
            // This gives us the proof of quadratic convergence of the sequence:
            // ε_{n+1} = | x_{n+1} - sqrt(a) |
            //         = | (x_n + a / x_n) / 2 - sqrt(a) |
            //         = | (x_n² + a - 2*x_n*sqrt(a)) / (2 * x_n) |
            //         = | (x_n - sqrt(a))² / (2 * x_n) |
            //         = | ε_n² / (2 * x_n) |
            //         = ε_n² / | (2 * x_n) |
            //
            // For the first iteration, we have a special case where x_0 is known:
            // ε_1 = ε_0² / | (2 * x_0) |
            //     ≤ (2**(e-2))² / (2 * (2**(e-1) + 2**(e-2)))
            //     ≤ 2**(2*e-4) / (3 * 2**(e-1))
            //     ≤ 2**(e-3) / 3
            //     ≤ 2**(e-3-log2(3))
            //     ≤ 2**(e-4.5)
            //
            // For the following iterations, we use the fact that, 2**(e-1) ≤ sqrt(a) ≤ x_n:
            // ε_{n+1} = ε_n² / | (2 * x_n) |
            //         ≤ (2**(e-k))² / (2 * 2**(e-1))
            //         ≤ 2**(2*e-2*k) / 2**e
            //         ≤ 2**(e-2*k)
            xn = (xn + a / xn) >> 1; // ε_1 := | x_1 - sqrt(a) | ≤ 2**(e-4.5)  -- special case, see above
            xn = (xn + a / xn) >> 1; // ε_2 := | x_2 - sqrt(a) | ≤ 2**(e-9)    -- general case with k = 4.5
            xn = (xn + a / xn) >> 1; // ε_3 := | x_3 - sqrt(a) | ≤ 2**(e-18)   -- general case with k = 9
            xn = (xn + a / xn) >> 1; // ε_4 := | x_4 - sqrt(a) | ≤ 2**(e-36)   -- general case with k = 18
            xn = (xn + a / xn) >> 1; // ε_5 := | x_5 - sqrt(a) | ≤ 2**(e-72)   -- general case with k = 36
            xn = (xn + a / xn) >> 1; // ε_6 := | x_6 - sqrt(a) | ≤ 2**(e-144)  -- general case with k = 72

            // Because e ≤ 128 (as discussed during the first estimation phase), we know have reached a precision
            // ε_6 ≤ 2**(e-144) < 1. Given we're operating on integers, then we can ensure that xn is now either
            // sqrt(a) or sqrt(a) + 1.
            return xn - SafeCast.toUint(xn > a / xn);
        }
    }

    /**
     * @dev Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && result * result < a);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 x) internal pure returns (uint256 r) {
        // If value has upper 128 bits set, log2 result is at least 128
        r = SafeCast.toUint(x > 0xffffffffffffffffffffffffffffffff) << 7;
        // If upper 64 bits of 128-bit half set, add 64 to result
        r |= SafeCast.toUint((x >> r) > 0xffffffffffffffff) << 6;
        // If upper 32 bits of 64-bit half set, add 32 to result
        r |= SafeCast.toUint((x >> r) > 0xffffffff) << 5;
        // If upper 16 bits of 32-bit half set, add 16 to result
        r |= SafeCast.toUint((x >> r) > 0xffff) << 4;
        // If upper 8 bits of 16-bit half set, add 8 to result
        r |= SafeCast.toUint((x >> r) > 0xff) << 3;
        // If upper 4 bits of 8-bit half set, add 4 to result
        r |= SafeCast.toUint((x >> r) > 0xf) << 2;

        // Shifts value right by the current result and use it as an index into this lookup table:
        //
        // | x (4 bits) |  index  | table[index] = MSB position |
        // |------------|---------|-----------------------------|
        // |    0000    |    0    |        table[0] = 0         |
        // |    0001    |    1    |        table[1] = 0         |
        // |    0010    |    2    |        table[2] = 1         |
        // |    0011    |    3    |        table[3] = 1         |
        // |    0100    |    4    |        table[4] = 2         |
        // |    0101    |    5    |        table[5] = 2         |
        // |    0110    |    6    |        table[6] = 2         |
        // |    0111    |    7    |        table[7] = 2         |
        // |    1000    |    8    |        table[8] = 3         |
        // |    1001    |    9    |        table[9] = 3         |
        // |    1010    |   10    |        table[10] = 3        |
        // |    1011    |   11    |        table[11] = 3        |
        // |    1100    |   12    |        table[12] = 3        |
        // |    1101    |   13    |        table[13] = 3        |
        // |    1110    |   14    |        table[14] = 3        |
        // |    1111    |   15    |        table[15] = 3        |
        //
        // The lookup table is represented as a 32-byte value with the MSB positions for 0-15 in the last 16 bytes.
        assembly ("memory-safe") {
            r := or(r, byte(shr(r, x), 0x0000010102020202030303030303030300000000000000000000000000000000))
        }
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 1 << result < value);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 10 ** result < value);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 x) internal pure returns (uint256 r) {
        // If value has upper 128 bits set, log2 result is at least 128
        r = SafeCast.toUint(x > 0xffffffffffffffffffffffffffffffff) << 7;
        // If upper 64 bits of 128-bit half set, add 64 to result
        r |= SafeCast.toUint((x >> r) > 0xffffffffffffffff) << 6;
        // If upper 32 bits of 64-bit half set, add 32 to result
        r |= SafeCast.toUint((x >> r) > 0xffffffff) << 5;
        // If upper 16 bits of 32-bit half set, add 16 to result
        r |= SafeCast.toUint((x >> r) > 0xffff) << 4;
        // Add 1 if upper 8 bits of 16-bit half set, and divide accumulated result by 8
        return (r >> 3) | SafeCast.toUint((x >> r) > 0xff);
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 1 << (result << 3) < value);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/math/SafeCast.sol)
// This file was procedurally generated from scripts/generate/templates/SafeCast.js.

pragma solidity ^0.8.20;

/**
 * @dev Wrappers over Solidity's uintXX/intXX/bool casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeCast {
    /**
     * @dev Value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedUintDowncast(uint8 bits, uint256 value);

    /**
     * @dev An int value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedIntToUint(int256 value);

    /**
     * @dev Value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedIntDowncast(uint8 bits, int256 value);

    /**
     * @dev An uint value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedUintToInt(uint256 value);

    /**
     * @dev Returns the downcasted uint248 from uint256, reverting on
     * overflow (when the input is greater than largest uint248).
     *
     * Counterpart to Solidity's `uint248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toUint248(uint256 value) internal pure returns (uint248) {
        if (value > type(uint248).max) {
            revert SafeCastOverflowedUintDowncast(248, value);
        }
        return uint248(value);
    }

    /**
     * @dev Returns the downcasted uint240 from uint256, reverting on
     * overflow (when the input is greater than largest uint240).
     *
     * Counterpart to Solidity's `uint240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toUint240(uint256 value) internal pure returns (uint240) {
        if (value > type(uint240).max) {
            revert SafeCastOverflowedUintDowncast(240, value);
        }
        return uint240(value);
    }

    /**
     * @dev Returns the downcasted uint232 from uint256, reverting on
     * overflow (when the input is greater than largest uint232).
     *
     * Counterpart to Solidity's `uint232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toUint232(uint256 value) internal pure returns (uint232) {
        if (value > type(uint232).max) {
            revert SafeCastOverflowedUintDowncast(232, value);
        }
        return uint232(value);
    }

    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        if (value > type(uint224).max) {
            revert SafeCastOverflowedUintDowncast(224, value);
        }
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint216 from uint256, reverting on
     * overflow (when the input is greater than largest uint216).
     *
     * Counterpart to Solidity's `uint216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toUint216(uint256 value) internal pure returns (uint216) {
        if (value > type(uint216).max) {
            revert SafeCastOverflowedUintDowncast(216, value);
        }
        return uint216(value);
    }

    /**
     * @dev Returns the downcasted uint208 from uint256, reverting on
     * overflow (when the input is greater than largest uint208).
     *
     * Counterpart to Solidity's `uint208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toUint208(uint256 value) internal pure returns (uint208) {
        if (value > type(uint208).max) {
            revert SafeCastOverflowedUintDowncast(208, value);
        }
        return uint208(value);
    }

    /**
     * @dev Returns the downcasted uint200 from uint256, reverting on
     * overflow (when the input is greater than largest uint200).
     *
     * Counterpart to Solidity's `uint200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toUint200(uint256 value) internal pure returns (uint200) {
        if (value > type(uint200).max) {
            revert SafeCastOverflowedUintDowncast(200, value);
        }
        return uint200(value);
    }

    /**
     * @dev Returns the downcasted uint192 from uint256, reverting on
     * overflow (when the input is greater than largest uint192).
     *
     * Counterpart to Solidity's `uint192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toUint192(uint256 value) internal pure returns (uint192) {
        if (value > type(uint192).max) {
            revert SafeCastOverflowedUintDowncast(192, value);
        }
        return uint192(value);
    }

    /**
     * @dev Returns the downcasted uint184 from uint256, reverting on
     * overflow (when the input is greater than largest uint184).
     *
     * Counterpart to Solidity's `uint184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toUint184(uint256 value) internal pure returns (uint184) {
        if (value > type(uint184).max) {
            revert SafeCastOverflowedUintDowncast(184, value);
        }
        return uint184(value);
    }

    /**
     * @dev Returns the downcasted uint176 from uint256, reverting on
     * overflow (when the input is greater than largest uint176).
     *
     * Counterpart to Solidity's `uint176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toUint176(uint256 value) internal pure returns (uint176) {
        if (value > type(uint176).max) {
            revert SafeCastOverflowedUintDowncast(176, value);
        }
        return uint176(value);
    }

    /**
     * @dev Returns the downcasted uint168 from uint256, reverting on
     * overflow (when the input is greater than largest uint168).
     *
     * Counterpart to Solidity's `uint168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toUint168(uint256 value) internal pure returns (uint168) {
        if (value > type(uint168).max) {
            revert SafeCastOverflowedUintDowncast(168, value);
        }
        return uint168(value);
    }

    /**
     * @dev Returns the downcasted uint160 from uint256, reverting on
     * overflow (when the input is greater than largest uint160).
     *
     * Counterpart to Solidity's `uint160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toUint160(uint256 value) internal pure returns (uint160) {
        if (value > type(uint160).max) {
            revert SafeCastOverflowedUintDowncast(160, value);
        }
        return uint160(value);
    }

    /**
     * @dev Returns the downcasted uint152 from uint256, reverting on
     * overflow (when the input is greater than largest uint152).
     *
     * Counterpart to Solidity's `uint152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toUint152(uint256 value) internal pure returns (uint152) {
        if (value > type(uint152).max) {
            revert SafeCastOverflowedUintDowncast(152, value);
        }
        return uint152(value);
    }

    /**
     * @dev Returns the downcasted uint144 from uint256, reverting on
     * overflow (when the input is greater than largest uint144).
     *
     * Counterpart to Solidity's `uint144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     */
    function toUint144(uint256 value) internal pure returns (uint144) {
        if (value > type(uint144).max) {
            revert SafeCastOverflowedUintDowncast(144, value);
        }
        return uint144(value);
    }

    /**
     * @dev Returns the downcasted uint136 from uint256, reverting on
     * overflow (when the input is greater than largest uint136).
     *
     * Counterpart to Solidity's `uint136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     */
    function toUint136(uint256 value) internal pure returns (uint136) {
        if (value > type(uint136).max) {
            revert SafeCastOverflowedUintDowncast(136, value);
        }
        return uint136(value);
    }

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        if (value > type(uint128).max) {
            revert SafeCastOverflowedUintDowncast(128, value);
        }
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint120 from uint256, reverting on
     * overflow (when the input is greater than largest uint120).
     *
     * Counterpart to Solidity's `uint120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     */
    function toUint120(uint256 value) internal pure returns (uint120) {
        if (value > type(uint120).max) {
            revert SafeCastOverflowedUintDowncast(120, value);
        }
        return uint120(value);
    }

    /**
     * @dev Returns the downcasted uint112 from uint256, reverting on
     * overflow (when the input is greater than largest uint112).
     *
     * Counterpart to Solidity's `uint112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     */
    function toUint112(uint256 value) internal pure returns (uint112) {
        if (value > type(uint112).max) {
            revert SafeCastOverflowedUintDowncast(112, value);
        }
        return uint112(value);
    }

    /**
     * @dev Returns the downcasted uint104 from uint256, reverting on
     * overflow (when the input is greater than largest uint104).
     *
     * Counterpart to Solidity's `uint104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     */
    function toUint104(uint256 value) internal pure returns (uint104) {
        if (value > type(uint104).max) {
            revert SafeCastOverflowedUintDowncast(104, value);
        }
        return uint104(value);
    }

    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        if (value > type(uint96).max) {
            revert SafeCastOverflowedUintDowncast(96, value);
        }
        return uint96(value);
    }

    /**
     * @dev Returns the downcasted uint88 from uint256, reverting on
     * overflow (when the input is greater than largest uint88).
     *
     * Counterpart to Solidity's `uint88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     */
    function toUint88(uint256 value) internal pure returns (uint88) {
        if (value > type(uint88).max) {
            revert SafeCastOverflowedUintDowncast(88, value);
        }
        return uint88(value);
    }

    /**
     * @dev Returns the downcasted uint80 from uint256, reverting on
     * overflow (when the input is greater than largest uint80).
     *
     * Counterpart to Solidity's `uint80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     */
    function toUint80(uint256 value) internal pure returns (uint80) {
        if (value > type(uint80).max) {
            revert SafeCastOverflowedUintDowncast(80, value);
        }
        return uint80(value);
    }

    /**
     * @dev Returns the downcasted uint72 from uint256, reverting on
     * overflow (when the input is greater than largest uint72).
     *
     * Counterpart to Solidity's `uint72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     */
    function toUint72(uint256 value) internal pure returns (uint72) {
        if (value > type(uint72).max) {
            revert SafeCastOverflowedUintDowncast(72, value);
        }
        return uint72(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        if (value > type(uint64).max) {
            revert SafeCastOverflowedUintDowncast(64, value);
        }
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint56 from uint256, reverting on
     * overflow (when the input is greater than largest uint56).
     *
     * Counterpart to Solidity's `uint56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     */
    function toUint56(uint256 value) internal pure returns (uint56) {
        if (value > type(uint56).max) {
            revert SafeCastOverflowedUintDowncast(56, value);
        }
        return uint56(value);
    }

    /**
     * @dev Returns the downcasted uint48 from uint256, reverting on
     * overflow (when the input is greater than largest uint48).
     *
     * Counterpart to Solidity's `uint48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     */
    function toUint48(uint256 value) internal pure returns (uint48) {
        if (value > type(uint48).max) {
            revert SafeCastOverflowedUintDowncast(48, value);
        }
        return uint48(value);
    }

    /**
     * @dev Returns the downcasted uint40 from uint256, reverting on
     * overflow (when the input is greater than largest uint40).
     *
     * Counterpart to Solidity's `uint40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     */
    function toUint40(uint256 value) internal pure returns (uint40) {
        if (value > type(uint40).max) {
            revert SafeCastOverflowedUintDowncast(40, value);
        }
        return uint40(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        if (value > type(uint32).max) {
            revert SafeCastOverflowedUintDowncast(32, value);
        }
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint24 from uint256, reverting on
     * overflow (when the input is greater than largest uint24).
     *
     * Counterpart to Solidity's `uint24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     */
    function toUint24(uint256 value) internal pure returns (uint24) {
        if (value > type(uint24).max) {
            revert SafeCastOverflowedUintDowncast(24, value);
        }
        return uint24(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        if (value > type(uint16).max) {
            revert SafeCastOverflowedUintDowncast(16, value);
        }
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        if (value > type(uint8).max) {
            revert SafeCastOverflowedUintDowncast(8, value);
        }
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        if (value < 0) {
            revert SafeCastOverflowedIntToUint(value);
        }
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int248 from int256, reverting on
     * overflow (when the input is less than smallest int248 or
     * greater than largest int248).
     *
     * Counterpart to Solidity's `int248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toInt248(int256 value) internal pure returns (int248 downcasted) {
        downcasted = int248(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(248, value);
        }
    }

    /**
     * @dev Returns the downcasted int240 from int256, reverting on
     * overflow (when the input is less than smallest int240 or
     * greater than largest int240).
     *
     * Counterpart to Solidity's `int240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toInt240(int256 value) internal pure returns (int240 downcasted) {
        downcasted = int240(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(240, value);
        }
    }

    /**
     * @dev Returns the downcasted int232 from int256, reverting on
     * overflow (when the input is less than smallest int232 or
     * greater than largest int232).
     *
     * Counterpart to Solidity's `int232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toInt232(int256 value) internal pure returns (int232 downcasted) {
        downcasted = int232(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(232, value);
        }
    }

    /**
     * @dev Returns the downcasted int224 from int256, reverting on
     * overflow (when the input is less than smallest int224 or
     * greater than largest int224).
     *
     * Counterpart to Solidity's `int224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toInt224(int256 value) internal pure returns (int224 downcasted) {
        downcasted = int224(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(224, value);
        }
    }

    /**
     * @dev Returns the downcasted int216 from int256, reverting on
     * overflow (when the input is less than smallest int216 or
     * greater than largest int216).
     *
     * Counterpart to Solidity's `int216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toInt216(int256 value) internal pure returns (int216 downcasted) {
        downcasted = int216(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(216, value);
        }
    }

    /**
     * @dev Returns the downcasted int208 from int256, reverting on
     * overflow (when the input is less than smallest int208 or
     * greater than largest int208).
     *
     * Counterpart to Solidity's `int208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toInt208(int256 value) internal pure returns (int208 downcasted) {
        downcasted = int208(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(208, value);
        }
    }

    /**
     * @dev Returns the downcasted int200 from int256, reverting on
     * overflow (when the input is less than smallest int200 or
     * greater than largest int200).
     *
     * Counterpart to Solidity's `int200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toInt200(int256 value) internal pure returns (int200 downcasted) {
        downcasted = int200(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(200, value);
        }
    }

    /**
     * @dev Returns the downcasted int192 from int256, reverting on
     * overflow (when the input is less than smallest int192 or
     * greater than largest int192).
     *
     * Counterpart to Solidity's `int192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toInt192(int256 value) internal pure returns (int192 downcasted) {
        downcasted = int192(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(192, value);
        }
    }

    /**
     * @dev Returns the downcasted int184 from int256, reverting on
     * overflow (when the input is less than smallest int184 or
     * greater than largest int184).
     *
     * Counterpart to Solidity's `int184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toInt184(int256 value) internal pure returns (int184 downcasted) {
        downcasted = int184(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(184, value);
        }
    }

    /**
     * @dev Returns the downcasted int176 from int256, reverting on
     * overflow (when the input is less than smallest int176 or
     * greater than largest int176).
     *
     * Counterpart to Solidity's `int176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toInt176(int256 value) internal pure returns (int176 downcasted) {
        downcasted = int176(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(176, value);
        }
    }

    /**
     * @dev Returns the downcasted int168 from int256, reverting on
     * overflow (when the input is less than smallest int168 or
     * greater than largest int168).
     *
     * Counterpart to Solidity's `int168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toInt168(int256 value) internal pure returns (int168 downcasted) {
        downcasted = int168(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(168, value);
        }
    }

    /**
     * @dev Returns the downcasted int160 from int256, reverting on
     * overflow (when the input is less than smallest int160 or
     * greater than largest int160).
     *
     * Counterpart to Solidity's `int160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toInt160(int256 value) internal pure returns (int160 downcasted) {
        downcasted = int160(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(160, value);
        }
    }

    /**
     * @dev Returns the downcasted int152 from int256, reverting on
     * overflow (when the input is less than smallest int152 or
     * greater than largest int152).
     *
     * Counterpart to Solidity's `int152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toInt152(int256 value) internal pure returns (int152 downcasted) {
        downcasted = int152(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(152, value);
        }
    }

    /**
     * @dev Returns the downcasted int144 from int256, reverting on
     * overflow (when the input is less than smallest int144 or
     * greater than largest int144).
     *
     * Counterpart to Solidity's `int144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     */
    function toInt144(int256 value) internal pure returns (int144 downcasted) {
        downcasted = int144(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(144, value);
        }
    }

    /**
     * @dev Returns the downcasted int136 from int256, reverting on
     * overflow (when the input is less than smallest int136 or
     * greater than largest int136).
     *
     * Counterpart to Solidity's `int136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     */
    function toInt136(int256 value) internal pure returns (int136 downcasted) {
        downcasted = int136(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(136, value);
        }
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toInt128(int256 value) internal pure returns (int128 downcasted) {
        downcasted = int128(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(128, value);
        }
    }

    /**
     * @dev Returns the downcasted int120 from int256, reverting on
     * overflow (when the input is less than smallest int120 or
     * greater than largest int120).
     *
     * Counterpart to Solidity's `int120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     */
    function toInt120(int256 value) internal pure returns (int120 downcasted) {
        downcasted = int120(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(120, value);
        }
    }

    /**
     * @dev Returns the downcasted int112 from int256, reverting on
     * overflow (when the input is less than smallest int112 or
     * greater than largest int112).
     *
     * Counterpart to Solidity's `int112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     */
    function toInt112(int256 value) internal pure returns (int112 downcasted) {
        downcasted = int112(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(112, value);
        }
    }

    /**
     * @dev Returns the downcasted int104 from int256, reverting on
     * overflow (when the input is less than smallest int104 or
     * greater than largest int104).
     *
     * Counterpart to Solidity's `int104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     */
    function toInt104(int256 value) internal pure returns (int104 downcasted) {
        downcasted = int104(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(104, value);
        }
    }

    /**
     * @dev Returns the downcasted int96 from int256, reverting on
     * overflow (when the input is less than smallest int96 or
     * greater than largest int96).
     *
     * Counterpart to Solidity's `int96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toInt96(int256 value) internal pure returns (int96 downcasted) {
        downcasted = int96(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(96, value);
        }
    }

    /**
     * @dev Returns the downcasted int88 from int256, reverting on
     * overflow (when the input is less than smallest int88 or
     * greater than largest int88).
     *
     * Counterpart to Solidity's `int88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     */
    function toInt88(int256 value) internal pure returns (int88 downcasted) {
        downcasted = int88(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(88, value);
        }
    }

    /**
     * @dev Returns the downcasted int80 from int256, reverting on
     * overflow (when the input is less than smallest int80 or
     * greater than largest int80).
     *
     * Counterpart to Solidity's `int80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     */
    function toInt80(int256 value) internal pure returns (int80 downcasted) {
        downcasted = int80(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(80, value);
        }
    }

    /**
     * @dev Returns the downcasted int72 from int256, reverting on
     * overflow (when the input is less than smallest int72 or
     * greater than largest int72).
     *
     * Counterpart to Solidity's `int72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     */
    function toInt72(int256 value) internal pure returns (int72 downcasted) {
        downcasted = int72(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(72, value);
        }
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toInt64(int256 value) internal pure returns (int64 downcasted) {
        downcasted = int64(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(64, value);
        }
    }

    /**
     * @dev Returns the downcasted int56 from int256, reverting on
     * overflow (when the input is less than smallest int56 or
     * greater than largest int56).
     *
     * Counterpart to Solidity's `int56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     */
    function toInt56(int256 value) internal pure returns (int56 downcasted) {
        downcasted = int56(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(56, value);
        }
    }

    /**
     * @dev Returns the downcasted int48 from int256, reverting on
     * overflow (when the input is less than smallest int48 or
     * greater than largest int48).
     *
     * Counterpart to Solidity's `int48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     */
    function toInt48(int256 value) internal pure returns (int48 downcasted) {
        downcasted = int48(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(48, value);
        }
    }

    /**
     * @dev Returns the downcasted int40 from int256, reverting on
     * overflow (when the input is less than smallest int40 or
     * greater than largest int40).
     *
     * Counterpart to Solidity's `int40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     */
    function toInt40(int256 value) internal pure returns (int40 downcasted) {
        downcasted = int40(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(40, value);
        }
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toInt32(int256 value) internal pure returns (int32 downcasted) {
        downcasted = int32(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(32, value);
        }
    }

    /**
     * @dev Returns the downcasted int24 from int256, reverting on
     * overflow (when the input is less than smallest int24 or
     * greater than largest int24).
     *
     * Counterpart to Solidity's `int24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     */
    function toInt24(int256 value) internal pure returns (int24 downcasted) {
        downcasted = int24(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(24, value);
        }
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toInt16(int256 value) internal pure returns (int16 downcasted) {
        downcasted = int16(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(16, value);
        }
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     */
    function toInt8(int256 value) internal pure returns (int8 downcasted) {
        downcasted = int8(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(8, value);
        }
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        if (value > uint256(type(int256).max)) {
            revert SafeCastOverflowedUintToInt(value);
        }
        return int256(value);
    }

    /**
     * @dev Cast a boolean (false or true) to a uint256 (0 or 1) with no jump.
     */
    function toUint(bool b) internal pure returns (uint256 u) {
        assembly ("memory-safe") {
            u := iszero(iszero(b))
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/Panic.sol)

pragma solidity ^0.8.20;

/**
 * @dev Helper library for emitting standardized panic codes.
 *
 * ```solidity
 * contract Example {
 *      using Panic for uint256;
 *
 *      // Use any of the declared internal constants
 *      function foo() { Panic.GENERIC.panic(); }
 *
 *      // Alternatively
 *      function foo() { Panic.panic(Panic.GENERIC); }
 * }
 * ```
 *
 * Follows the list from https://github.com/ethereum/solidity/blob/v0.8.24/libsolutil/ErrorCodes.h[libsolutil].
 *
 * _Available since v5.1._
 */
// slither-disable-next-line unused-state
library Panic {
    /// @dev generic / unspecified error
    uint256 internal constant GENERIC = 0x00;
    /// @dev used by the assert() builtin
    uint256 internal constant ASSERT = 0x01;
    /// @dev arithmetic underflow or overflow
    uint256 internal constant UNDER_OVERFLOW = 0x11;
    /// @dev division or modulo by zero
    uint256 internal constant DIVISION_BY_ZERO = 0x12;
    /// @dev enum conversion error
    uint256 internal constant ENUM_CONVERSION_ERROR = 0x21;
    /// @dev invalid encoding in storage
    uint256 internal constant STORAGE_ENCODING_ERROR = 0x22;
    /// @dev empty array pop
    uint256 internal constant EMPTY_ARRAY_POP = 0x31;
    /// @dev array out of bounds access
    uint256 internal constant ARRAY_OUT_OF_BOUNDS = 0x32;
    /// @dev resource error (too large allocation or too large array)
    uint256 internal constant RESOURCE_ERROR = 0x41;
    /// @dev calling invalid internal function
    uint256 internal constant INVALID_INTERNAL_FUNCTION = 0x51;

    /// @dev Reverts with a panic code. Recommended to use with
    /// the internal constants with predefined codes.
    function panic(uint256 code) internal pure {
        assembly ("memory-safe") {
            mstore(0x00, 0x4e487b71)
            mstore(0x20, code)
            revert(0x1c, 0x24)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.1.0) (utils/ReentrancyGuard.sol)

pragma solidity ^0.8.20;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If EIP-1153 (transient storage) is available on the chain you're deploying at,
 * consider using {ReentrancyGuardTransient} instead.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant NOT_ENTERED = 1;
    uint256 private constant ENTERED = 2;

    uint256 private _status;

    /**
     * @dev Unauthorized reentrant call.
     */
    error ReentrancyGuardReentrantCall();

    constructor() {
        _status = NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be NOT_ENTERED
        if (_status == ENTERED) {
            revert ReentrancyGuardReentrantCall();
        }

        // Any calls to nonReentrant after this point will fail
        _status = ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == ENTERED;
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "evmVersion": "paris",
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  },
  "metadata": {
    "useLiteralContent": true
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_ovault","type":"address"},{"internalType":"address","name":"_assetOFT","type":"address"},{"internalType":"address","name":"_shareOFT","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"assetERC20","type":"address"},{"internalType":"address","name":"vaultAsset","type":"address"}],"name":"AssetTokenNotVaultAsset","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint256","name":"assets","type":"uint256"},{"internalType":"uint256","name":"max","type":"uint256"}],"name":"ERC4626ExceededMaxDeposit","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"uint256","name":"shares","type":"uint256"},{"internalType":"uint256","name":"max","type":"uint256"}],"name":"ERC4626ExceededMaxRedeem","type":"error"},{"inputs":[{"internalType":"uint256","name":"expectedMsgValue","type":"uint256"},{"internalType":"uint256","name":"actualMsgValue","type":"uint256"}],"name":"InsufficientMsgValue","type":"error"},{"inputs":[],"name":"NoMsgValueExpected","type":"error"},{"inputs":[{"internalType":"address","name":"caller","type":"address"}],"name":"OnlyEndpoint","type":"error"},{"inputs":[{"internalType":"address","name":"caller","type":"address"}],"name":"OnlySelf","type":"error"},{"inputs":[{"internalType":"address","name":"caller","type":"address"}],"name":"OnlyValidComposeCaller","type":"error"},{"inputs":[],"name":"ReentrancyGuardReentrantCall","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"SafeERC20FailedOperation","type":"error"},{"inputs":[{"internalType":"address","name":"shareOFT","type":"address"}],"name":"ShareOFTNotAdapter","type":"error"},{"inputs":[{"internalType":"address","name":"shareERC20","type":"address"},{"internalType":"address","name":"vault","type":"address"}],"name":"ShareTokenNotVault","type":"error"},{"inputs":[{"internalType":"uint256","name":"amountLD","type":"uint256"},{"internalType":"uint256","name":"minAmountLD","type":"uint256"}],"name":"SlippageExceeded","type":"error"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"bytes32","name":"sender","type":"bytes32"},{"indexed":false,"internalType":"bytes32","name":"recipient","type":"bytes32"},{"indexed":false,"internalType":"uint32","name":"dstEid","type":"uint32"},{"indexed":false,"internalType":"uint256","name":"assetAmt","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"shareAmt","type":"uint256"}],"name":"Deposited","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"bytes32","name":"sender","type":"bytes32"},{"indexed":false,"internalType":"bytes32","name":"recipient","type":"bytes32"},{"indexed":false,"internalType":"uint32","name":"dstEid","type":"uint32"},{"indexed":false,"internalType":"uint256","name":"shareAmt","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"assetAmt","type":"uint256"}],"name":"Redeemed","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"guid","type":"bytes32"}],"name":"Refunded","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"guid","type":"bytes32"}],"name":"Sent","type":"event"},{"inputs":[],"name":"ASSET_ERC20","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"ASSET_OFT","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"ENDPOINT","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"SHARE_ERC20","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"SHARE_OFT","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"VAULT","outputs":[{"internalType":"contract IERC4626","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"VAULT_EID","outputs":[{"internalType":"uint32","name":"","type":"uint32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_assetAmount","type":"uint256"},{"components":[{"internalType":"uint32","name":"dstEid","type":"uint32"},{"internalType":"bytes32","name":"to","type":"bytes32"},{"internalType":"uint256","name":"amountLD","type":"uint256"},{"internalType":"uint256","name":"minAmountLD","type":"uint256"},{"internalType":"bytes","name":"extraOptions","type":"bytes"},{"internalType":"bytes","name":"composeMsg","type":"bytes"},{"internalType":"bytes","name":"oftCmd","type":"bytes"}],"internalType":"struct SendParam","name":"_sendParam","type":"tuple"},{"internalType":"address","name":"_refundAddress","type":"address"}],"name":"depositAndSend","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"_oftIn","type":"address"},{"internalType":"bytes32","name":"_composeFrom","type":"bytes32"},{"internalType":"bytes","name":"_composeMsg","type":"bytes"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"handleCompose","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"_composeSender","type":"address"},{"internalType":"bytes32","name":"_guid","type":"bytes32"},{"internalType":"bytes","name":"_message","type":"bytes"},{"internalType":"address","name":"","type":"address"},{"internalType":"bytes","name":"","type":"bytes"}],"name":"lzCompose","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"_from","type":"address"},{"internalType":"address","name":"_targetOFT","type":"address"},{"internalType":"uint256","name":"_vaultInAmount","type":"uint256"},{"components":[{"internalType":"uint32","name":"dstEid","type":"uint32"},{"internalType":"bytes32","name":"to","type":"bytes32"},{"internalType":"uint256","name":"amountLD","type":"uint256"},{"internalType":"uint256","name":"minAmountLD","type":"uint256"},{"internalType":"bytes","name":"extraOptions","type":"bytes"},{"internalType":"bytes","name":"composeMsg","type":"bytes"},{"internalType":"bytes","name":"oftCmd","type":"bytes"}],"internalType":"struct SendParam","name":"_sendParam","type":"tuple"}],"name":"quoteSend","outputs":[{"components":[{"internalType":"uint256","name":"nativeFee","type":"uint256"},{"internalType":"uint256","name":"lzTokenFee","type":"uint256"}],"internalType":"struct MessagingFee","name":"","type":"tuple"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_shareAmount","type":"uint256"},{"components":[{"internalType":"uint32","name":"dstEid","type":"uint32"},{"internalType":"bytes32","name":"to","type":"bytes32"},{"internalType":"uint256","name":"amountLD","type":"uint256"},{"internalType":"uint256","name":"minAmountLD","type":"uint256"},{"internalType":"bytes","name":"extraOptions","type":"bytes"},{"internalType":"bytes","name":"composeMsg","type":"bytes"},{"internalType":"bytes","name":"oftCmd","type":"bytes"}],"internalType":"struct SendParam","name":"_sendParam","type":"tuple"},{"internalType":"address","name":"_refundAddress","type":"address"}],"name":"redeemAndSend","outputs":[],"stateMutability":"payable","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

0000000000000000000000001202f5c7b4b9e47a1a484e8b270be34dbbc75055000000000000000000000000d2ee2776f34ef4e7325745b06e6d464b08d4be0e000000000000000000000000ab17c1fe647c37ceb9b96d1c27dd189bf8451978

-----Decoded View---------------
Arg [0] : _ovault (address): 0x1202F5C7b4B9E47a1A484E8B270be34dbbC75055
Arg [1] : _assetOFT (address): 0xD2eE2776F34Ef4E7325745b06E6d464b08D4be0E
Arg [2] : _shareOFT (address): 0xab17c1fE647c37ceb9b96d1c27DD189bf8451978

-----Encoded View---------------
3 Constructor Arguments found :
Arg [0] : 0000000000000000000000001202f5c7b4b9e47a1a484e8b270be34dbbc75055
Arg [1] : 000000000000000000000000d2ee2776f34ef4e7325745b06e6d464b08d4be0e
Arg [2] : 000000000000000000000000ab17c1fe647c37ceb9b96d1c27dd189bf8451978

322:602:31:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;2093:34:12;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;178:32:32;;;160:51;;148:2;133:18;2093:34:12;;;;;;;;8653:377;;;;;;:::i;:::-;;:::i;:::-;;2133:36;;;;;;;;;;;;;;;2175:34;;;;;;;;;;;;;;;2055:31;;;;;;;;;;;;;;;11215:375;;;;;;:::i;:::-;;:::i;2258:33::-;;;;;;;;;;;;;;;14687:1049;;;;;;;;;;-1:-1:-1;14687:1049:12;;;;;:::i;:::-;;:::i;:::-;;;;;;;:::i;7354:957::-;;;;;;:::i;:::-;;:::i;2215:36::-;;;;;;;;;;;;;;;2297:33;;;;;;;;;;;;;;;;;;5420:10:32;5408:23;;;5390:42;;5378:2;5363:18;2297:33:12;5246:192:32;5097:1518:12;;;;;;:::i;:::-;;:::i;8653:377::-;2500:21:27;:19;:21::i;:::-;8830:77:12::1;-1:-1:-1::0;;;;;8837:11:12::1;8830:36;8867:10;8887:4;8894:12:::0;8830:36:::1;:77::i;:::-;8917:106;8969:10;8982:12;8996:10;9008:14;8917:15;:106::i;:::-;2542:20:27::0;1857:1;3068:7;:21;2888:208;2542:20;8653:377:12;;;:::o;11215:375::-;2500:21:27;:19;:21::i;:::-;11391:77:12::1;-1:-1:-1::0;;;;;11398:11:12::1;11391:36;11428:10;11448:4;11455:12:::0;11391:36:::1;:77::i;:::-;11478:105;11529:10;11542:12;11556:10;11568:14;11478;:105::i;14687:1049::-:0;-1:-1:-1;;;;;;;;;;;;;;;;;15065:9:12;-1:-1:-1;;;;;15051:23:12;:10;-1:-1:-1;;;;;15051:23:12;;15047:621;;15110:22;;-1:-1:-1;;;15110:22:12;;-1:-1:-1;;;;;178:32:32;;;15110:22:12;;;160:51:32;15090:17:12;;15110:5;:15;;;;;;133:18:32;;15110:22:12;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;15090:42;;15167:9;15150:14;:26;15146:138;;;15203:66;;-1:-1:-1;;;15203:66:12;;-1:-1:-1;;;;;7144:32:32;;15203:66:12;;;7126:51:32;7193:18;;;7186:34;;;7236:18;;;7229:34;;;7099:18;;15203:66:12;;;;;;;;15146:138;15320:35;;-1:-1:-1;;;15320:35:12;;;;;7420:25:32;;;15320:5:12;-1:-1:-1;;;;;15320:19:12;;;;7393:18:32;;15320:35:12;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;15298:19;;;:57;-1:-1:-1;15047:621:12;;;15407:23;;-1:-1:-1;;;15407:23:12;;-1:-1:-1;;;;;178:32:32;;;15407:23:12;;;160:51:32;15386:18:12;;15407:5;:16;;;;;;133:18:32;;15407:23:12;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;15386:44;;15465:10;15448:14;:27;15444:141;;;15502:68;;-1:-1:-1;;;15502:68:12;;-1:-1:-1;;;;;7144:32:32;;15502:68:12;;;7126:51:32;7193:18;;;7186:34;;;7236:18;;;7229:34;;;7099:18;;15502:68:12;6924:345:32;15444:141:12;15621:36;;-1:-1:-1;;;15621:36:12;;;;;7420:25:32;;;15621:5:12;-1:-1:-1;;;;;15621:20:12;;;;7393:18:32;;15621:36:12;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;15599:19;;;:58;-1:-1:-1;15047:621:12;15684:45;;-1:-1:-1;;;15684:45:12;;-1:-1:-1;;;;;15684:26:12;;;;;:45;;15711:10;;15723:5;;15684:45;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;15677:52;14687:1049;-1:-1:-1;;;;;14687:1049:12:o;7354:957::-;7571:10;7593:4;7571:27;7567:60;;7607:20;;-1:-1:-1;;;7607:20:12;;7616:10;7607:20;;;160:51:32;133:18;;7607:20:12;14:203:32;7567:60:12;7908:26;7936:19;7970:11;7959:45;;;;;;;;;;;;:::i;:::-;7907:97;;;;8030:11;8018:9;:23;8014:80;;;8050:44;;-1:-1:-1;;;8050:44:12;;;;;11879:25:32;;;8084:9:12;11920:18:32;;;11913:34;11852:18;;8050:44:12;11705:248:32;8014:80:12;8119:9;-1:-1:-1;;;;;8109:19:12;:6;-1:-1:-1;;;;;8109:19:12;;8105:200;;8144:60;8160:12;8174:7;8183:9;8194;8144:15;:60::i;:::-;8105:200;;;8235:59;8250:12;8264:7;8273:9;8284;8235:14;:59::i;:::-;7513:798;;7354:957;;;;:::o;5097:1518::-;5476:10;-1:-1:-1;;;;;5490:8:12;5476:22;;5472:59;;5507:24;;-1:-1:-1;;;5507:24:12;;5520:10;5507:24;;;160:51:32;133:18;;5507:24:12;14:203:32;5472:59:12;5563:9;-1:-1:-1;;;;;5545:27:12;:14;-1:-1:-1;;;;;5545:27:12;;;:58;;;;;5594:9;-1:-1:-1;;;;;5576:27:12;:14;-1:-1:-1;;;;;5576:27:12;;;5545:58;5541:109;;;5612:38;;-1:-1:-1;;;5612:38:12;;-1:-1:-1;;;;;178:32:32;;5612:38:12;;;160:51:32;133:18;;5612:38:12;14:203:32;5541:109:12;5661:19;5683:22;:8;;:20;:22::i;:::-;5661:44;;5715:14;5732:19;:8;;:17;:19::i;:::-;5715:36;;5761:23;5787:21;:8;;:19;:21::i;:::-;5916:87;;-1:-1:-1;;;5916:87:12;;5761:47;;-1:-1:-1;5916:4:12;;:18;;5943:9;;5916:87;;5955:14;;5971:11;;5761:47;;5996:6;;5916:87;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;5912:697;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;6336:12:12;6343:4;6336:12;:::i;:::-;-1:-1:-1;;;;;;6336:45:12;;6332:166;;6460:4;6454:11;6447:4;6443:2;6439:13;6432:34;6332:166;6512:52;6520:14;6536:8;;6546:6;6554:9;6512:7;:52::i;:::-;6583:15;;6592:5;;6583:15;;;;;6046:563;5912:697;;;6023:11;;6028:5;;6023:11;;;;;5912:697;5462:1153;;;5097:1518;;;;;;;:::o;2575:307:27:-;1899:1;2702:7;;:18;2698:86;;2743:30;;-1:-1:-1;;;2743:30:27;;;;;;;;;;;2698:86;1899:1;2858:7;:17;2575:307::o;1618:188:24:-;1745:53;;-1:-1:-1;;;;;13045:15:32;;;1745:53:24;;;13027:34:32;13097:15;;;13077:18;;;13070:43;13129:18;;;13122:34;;;1718:81:24;;1738:5;;1760:18;;;;;12962::32;;1745:53:24;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;1745:53:24;;;;;;;;;;;1718:19;:81::i;:::-;1618:188;;;;:::o;9806:542:12:-;9991:19;10013:34;10022:10;10034:12;10013:8;:34::i;:::-;9991:56;;10057:52;10073:11;10086:10;:22;;;10057:15;:52::i;:::-;10120:19;;;:33;;;10188:1;10163:22;;;:26;10200:44;10206:9;10120:10;10229:14;10200:5;:44::i;:::-;10281:13;;;;;10296:17;;10259:82;;;13424:25:32;;;13465:18;;;13458:34;;;;13540:10;13528:23;13508:18;;;13501:51;13583:2;13568:18;;13561:34;;;13626:3;13611:19;;13604:35;;;10259:82:12;;13411:3:32;13396:19;10259:82:12;;;;;;;;9981:367;9806:542;;;;:::o;12423:536::-;12606:19;12628:32;12636:9;12647:12;12628:7;:32::i;:::-;12606:54;;12670:52;12686:11;12699:10;:22;;;12670:15;:52::i;:::-;12733:19;;;:33;;;12801:1;12776:22;;;:26;12813:44;12819:9;12733:10;12842:14;12813:5;:44::i;:::-;12892:13;;;;;12907:17;;12872:80;;;13424:25:32;;;13465:18;;;13458:34;;;;13540:10;13528:23;13508:18;;;13501:51;13583:2;13568:18;;13561:34;;;13626:3;13611:19;;13604:35;;;12872:80:12;;13411:3:32;13396:19;12872:80:12;13167:478:32;1989:149:11;2054:7;2088:42;335:2;282;2088:4;;:42;:::i;:::-;2080:51;;;:::i;:::-;2073:58;;1989:149;;;;;:::o;1676:150::-;1738:7;1780:37;282:2;232;1780:4;;:37;:::i;2273:128::-;2337:12;2368:26;:4;335:2;2368:4;;:26;:::i;:::-;2361:33;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;2361:33:11;;2273:128;-1:-1:-1;;;;;;2273:128:11:o;17232:577:12:-;17478:32;-1:-1:-1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;17478:32:12;17545:35;17571:8;;17545:25;:35::i;:::-;17520:60;;;;17611:40;17642:8;;17611:30;:40::i;:::-;17590:18;;;;:61;;;;17661:24;;;;:34;;;17759:26;;;;;;;17730:9;17759:26;;;-1:-1:-1;17759:26:12;;;;;;;17706:96;;-1:-1:-1;;;17706:96:12;;-1:-1:-1;;;;;17706:15:12;;;;;17730:9;;17706:96;;17590:15;;17787:14;;17706:96;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;17346:463;17232:577;;;;;:::o;8370:720:24:-;8450:18;8478:19;8616:4;8613:1;8606:4;8600:11;8593:4;8587;8583:15;8580:1;8573:5;8566;8561:60;8673:7;8663:176;;8717:4;8711:11;8762:16;8759:1;8754:3;8739:40;8808:16;8803:3;8796:29;8663:176;-1:-1:-1;;8916:1:24;8910:8;8866:16;;-1:-1:-1;8942:15:24;;:68;;8994:11;9009:1;8994:16;;8942:68;;;-1:-1:-1;;;;;8960:26:24;;;:31;8942:68;8938:146;;;9033:40;;-1:-1:-1;;;9033:40:24;;-1:-1:-1;;;;;178:32:32;;9033:40:24;;;160:51:32;133:18;;9033:40:24;14:203:32;10717:184:12;10852:42;;-1:-1:-1;;;10852:42:12;;;;;15868:25:32;;;10888:4:12;15909:18:32;;;15902:60;10807:19:12;;10852:5;-1:-1:-1;;;;;10852:13:12;;;;15841:18:32;;10852:42:12;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;13928:183::-;14042:12;14030:9;:24;14026:78;;;14063:41;;-1:-1:-1;;;14063:41:12;;;;;11879:25:32;;;11920:18;;;11913:34;;;11852:18;;14063:41:12;11705:248:32;14026:78:12;13928:183;;:::o;16248:628::-;16353:17;;:30;16374:9;16353:30;;;;;16349:521;;16489:13;16513:9;-1:-1:-1;;;;;16505:17:12;:4;-1:-1:-1;;;;;16505:17:12;;:45;;16539:11;16505:45;;;16525:11;16505:45;16489:61;-1:-1:-1;16569:9:12;:13;16565:46;;16591:20;;-1:-1:-1;;;16591:20:12;;;;;;;;;;;16565:46;16625:81;16652:32;:10;:13;;;2976:2:11;2865:123;16652:32:12;16686:19;;;;-1:-1:-1;;;;;16625:26:12;;;:81;:26;:81::i;16349:521::-;16816:26;;;;;;;;16792:9;16816:26;;;-1:-1:-1;16816:26:12;;;;16768:91;;-1:-1:-1;;;16768:91:12;;-1:-1:-1;;;;;16768:15:12;;;;;16792:9;;16768:91;;16804:10;;16844:14;;16768:91;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;16248:628;;;:::o;13332:196::-;13465:56;;-1:-1:-1;;;13465:56:12;;;;;16175:25:32;;;13500:4:12;16254:18:32;;;16247:43;;;16306:18;;;16299:43;13420:19:12;;13465:5;-1:-1:-1;;;;;13465:12:12;;;;16148:18:32;;13465:56:12;15973:375:32;1358:141:11;1418:6;1457:33;232:2;185:1;1457:4;;:33;:::i;:::-;1450:41;;;:::i;:::-;1443:49;;;1358:141;-1:-1:-1;;;1358:141:11:o;1219:160:24:-;1328:43;;-1:-1:-1;;;;;16873:32:32;;;1328:43:24;;;16855:51:32;16922:18;;;16915:34;;;1301:71:24;;1321:5;;1343:14;;;;;16828:18:32;;1328:43:24;16681:274:32;222:127;283:10;278:3;274:20;271:1;264:31;314:4;311:1;304:15;338:4;335:1;328:15;354:253;426:2;420:9;468:4;456:17;;503:18;488:34;;524:22;;;485:62;482:88;;;550:18;;:::i;:::-;586:2;579:22;354:253;:::o;612:275::-;683:2;677:9;748:2;729:13;;-1:-1:-1;;725:27:32;713:40;;783:18;768:34;;804:22;;;765:62;762:88;;;830:18;;:::i;:::-;866:2;859:22;612:275;;-1:-1:-1;612:275:32:o;892:121::-;977:10;970:5;966:22;959:5;956:33;946:61;;1003:1;1000;993:12;946:61;892:121;:::o;1018:132::-;1085:20;;1114:30;1085:20;1114:30;:::i;:::-;1018:132;;;:::o;1155:186::-;1203:4;1236:18;1228:6;1225:30;1222:56;;;1258:18;;:::i;:::-;-1:-1:-1;1324:2:32;1303:15;-1:-1:-1;;1299:29:32;1330:4;1295:40;;1155:186::o;1346:462::-;1388:5;1441:3;1434:4;1426:6;1422:17;1418:27;1408:55;;1459:1;1456;1449:12;1408:55;1495:6;1482:20;1526:48;1542:31;1570:2;1542:31;:::i;:::-;1526:48;:::i;:::-;1599:2;1590:7;1583:19;1645:3;1638:4;1633:2;1625:6;1621:15;1617:26;1614:35;1611:55;;;1662:1;1659;1652:12;1611:55;1727:2;1720:4;1712:6;1708:17;1701:4;1692:7;1688:18;1675:55;1775:1;1750:16;;;1768:4;1746:27;1739:38;;;;1754:7;1346:462;-1:-1:-1;;;1346:462:32:o;1813:1002::-;1869:5;1917:4;1905:9;1900:3;1896:19;1892:30;1889:50;;;1935:1;1932;1925:12;1889:50;1957:22;;:::i;:::-;1948:31;;2002:28;2020:9;2002:28;:::i;:::-;1995:5;1988:43;2091:2;2080:9;2076:18;2063:32;2058:2;2051:5;2047:14;2040:56;2156:2;2145:9;2141:18;2128:32;2123:2;2116:5;2112:14;2105:56;2221:2;2210:9;2206:18;2193:32;2188:2;2181:5;2177:14;2170:56;2277:3;2266:9;2262:19;2249:33;2301:18;2342:2;2334:6;2331:14;2328:34;;;2358:1;2355;2348:12;2328:34;2395:45;2436:3;2427:6;2416:9;2412:22;2395:45;:::i;:::-;2389:3;2382:5;2378:15;2371:70;2494:3;2483:9;2479:19;2466:33;2450:49;;2524:2;2514:8;2511:16;2508:36;;;2540:1;2537;2530:12;2508:36;2577:47;2620:3;2609:8;2598:9;2594:24;2577:47;:::i;:::-;2571:3;2564:5;2560:15;2553:72;2678:3;2667:9;2663:19;2650:33;2634:49;;2708:2;2698:8;2695:16;2692:36;;;2724:1;2721;2714:12;2692:36;;2761:47;2804:3;2793:8;2782:9;2778:24;2761:47;:::i;:::-;2755:3;2748:5;2744:15;2737:72;;1813:1002;;;;:::o;2820:173::-;2888:20;;-1:-1:-1;;;;;2937:31:32;;2927:42;;2917:70;;2983:1;2980;2973:12;2998:491;3102:6;3110;3118;3171:2;3159:9;3150:7;3146:23;3142:32;3139:52;;;3187:1;3184;3177:12;3139:52;3223:9;3210:23;3200:33;;3284:2;3273:9;3269:18;3256:32;3311:18;3303:6;3300:30;3297:50;;;3343:1;3340;3333:12;3297:50;3366:60;3418:7;3409:6;3398:9;3394:22;3366:60;:::i;:::-;3356:70;;;3445:38;3479:2;3468:9;3464:18;3445:38;:::i;:::-;3435:48;;2998:491;;;;;:::o;3719:566::-;3832:6;3840;3848;3856;3909:3;3897:9;3888:7;3884:23;3880:33;3877:53;;;3926:1;3923;3916:12;3877:53;3949:29;3968:9;3949:29;:::i;:::-;3939:39;;3997:38;4031:2;4020:9;4016:18;3997:38;:::i;:::-;3987:48;;4082:2;4071:9;4067:18;4054:32;4044:42;;4137:2;4126:9;4122:18;4109:32;4164:18;4156:6;4153:30;4150:50;;;4196:1;4193;4186:12;4150:50;4219:60;4271:7;4262:6;4251:9;4247:22;4219:60;:::i;:::-;4209:70;;;3719:566;;;;;;;:::o;4448:257::-;4368:12;;4356:25;;4430:4;4419:16;;;4413:23;4397:14;;;4390:47;4638:2;4623:18;;4650:49;4290:153;4710:531;4805:6;4813;4821;4829;4882:3;4870:9;4861:7;4857:23;4853:33;4850:53;;;4899:1;4896;4889:12;4850:53;4922:29;4941:9;4922:29;:::i;:::-;4912:39;;4998:2;4987:9;4983:18;4970:32;4960:42;;5053:2;5042:9;5038:18;5025:32;5080:18;5072:6;5069:30;5066:50;;;5112:1;5109;5102:12;5066:50;5135:49;5176:7;5167:6;5156:9;5152:22;5135:49;:::i;:::-;4710:531;;;;-1:-1:-1;5125:59:32;;5231:2;5216:18;5203:32;;-1:-1:-1;;;4710:531:32:o;5443:347::-;5494:8;5504:6;5558:3;5551:4;5543:6;5539:17;5535:27;5525:55;;5576:1;5573;5566:12;5525:55;-1:-1:-1;5599:20:32;;5642:18;5631:30;;5628:50;;;5674:1;5671;5664:12;5628:50;5711:4;5703:6;5699:17;5687:29;;5763:3;5756:4;5747:6;5739;5735:19;5731:30;5728:39;5725:59;;;5780:1;5777;5770:12;5725:59;5443:347;;;;;:::o;5795:935::-;5912:6;5920;5928;5936;5944;5952;5960;6013:3;6001:9;5992:7;5988:23;5984:33;5981:53;;;6030:1;6027;6020:12;5981:53;6053:29;6072:9;6053:29;:::i;:::-;6043:39;;6129:2;6118:9;6114:18;6101:32;6091:42;;6184:2;6173:9;6169:18;6156:32;6207:18;6248:2;6240:6;6237:14;6234:34;;;6264:1;6261;6254:12;6234:34;6303:58;6353:7;6344:6;6333:9;6329:22;6303:58;:::i;:::-;6380:8;;-1:-1:-1;6277:84:32;-1:-1:-1;6277:84:32;;-1:-1:-1;6434:38:32;6468:2;6453:18;;6434:38;:::i;:::-;6424:48;;6525:3;6514:9;6510:19;6497:33;6481:49;;6555:2;6545:8;6542:16;6539:36;;;6571:1;6568;6561:12;6539:36;;6610:60;6662:7;6651:8;6640:9;6636:24;6610:60;:::i;:::-;5795:935;;;;-1:-1:-1;5795:935:32;;-1:-1:-1;5795:935:32;;;;6584:86;;-1:-1:-1;;;5795:935:32:o;6735:184::-;6805:6;6858:2;6846:9;6837:7;6833:23;6829:32;6826:52;;;6874:1;6871;6864:12;6826:52;-1:-1:-1;6897:16:32;;6735:184;-1:-1:-1;6735:184:32:o;7456:250::-;7541:1;7551:113;7565:6;7562:1;7559:13;7551:113;;;7641:11;;;7635:18;7622:11;;;7615:39;7587:2;7580:10;7551:113;;;-1:-1:-1;;7698:1:32;7680:16;;7673:27;7456:250::o;7711:270::-;7752:3;7790:5;7784:12;7817:6;7812:3;7805:19;7833:76;7902:6;7895:4;7890:3;7886:14;7879:4;7872:5;7868:16;7833:76;:::i;:::-;7963:2;7942:15;-1:-1:-1;;7938:29:32;7929:39;;;;7970:4;7925:50;;7711:270;-1:-1:-1;;7711:270:32:o;7986:763::-;8086:10;8078:5;8072:12;8068:29;8063:3;8056:42;8147:4;8140:5;8136:16;8130:23;8123:4;8118:3;8114:14;8107:47;8203:4;8196:5;8192:16;8186:23;8179:4;8174:3;8170:14;8163:47;8259:4;8252:5;8248:16;8242:23;8235:4;8230:3;8226:14;8219:47;8038:3;8312:4;8305:5;8301:16;8295:23;8350:4;8343;8338:3;8334:14;8327:28;8376:46;8416:4;8411:3;8407:14;8393:12;8376:46;:::i;:::-;8364:58;;8470:4;8463:5;8459:16;8453:23;8518:3;8512:4;8508:14;8501:4;8496:3;8492:14;8485:38;8546;8579:4;8563:14;8546:38;:::i;:::-;8532:52;;;8632:4;8625:5;8621:16;8615:23;8682:3;8674:6;8670:16;8663:4;8658:3;8654:14;8647:40;8703;8736:6;8720:14;8703:40;:::i;8754:345::-;8959:2;8948:9;8941:21;8922:4;8979:55;9030:2;9019:9;9015:18;9007:6;8979:55;:::i;:::-;8971:63;;9084:6;9077:14;9070:22;9065:2;9054:9;9050:18;9043:50;8754:345;;;;;:::o;9104:478::-;9174:5;9222:4;9210:9;9205:3;9201:19;9197:30;9194:50;;;9240:1;9237;9230:12;9194:50;9273:4;9267:11;9317:4;9309:6;9305:17;9388:6;9376:10;9373:22;9352:18;9340:10;9337:34;9334:62;9331:88;;;9399:18;;:::i;:::-;9435:4;9428:24;9500:16;;9485:32;;9571:2;9556:18;;;9550:25;9533:15;;;9526:50;;;;-1:-1:-1;9470:6:32;9104:478;-1:-1:-1;9104:478:32:o;9587:257::-;9685:6;9738:2;9726:9;9717:7;9713:23;9709:32;9706:52;;;9754:1;9751;9744:12;9706:52;9777:61;9830:7;9819:9;9777:61;:::i;9849:136::-;9927:13;;9949:30;9927:13;9949:30;:::i;9990:441::-;10043:5;10096:3;10089:4;10081:6;10077:17;10073:27;10063:55;;10114:1;10111;10104:12;10063:55;10143:6;10137:13;10174:48;10190:31;10218:2;10190:31;:::i;10174:48::-;10247:2;10238:7;10231:19;10293:3;10286:4;10281:2;10273:6;10269:15;10265:26;10262:35;10259:55;;;10310:1;10307;10300:12;10259:55;10323:77;10397:2;10390:4;10381:7;10377:18;10370:4;10362:6;10358:17;10323:77;:::i;:::-;10418:7;9990:441;-1:-1:-1;;;;9990:441:32:o;10436:1264::-;10542:6;10550;10603:2;10591:9;10582:7;10578:23;10574:32;10571:52;;;10619:1;10616;10609:12;10571:52;10652:9;10646:16;10681:18;10722:2;10714:6;10711:14;10708:34;;;10738:1;10735;10728:12;10708:34;10761:22;;;;10817:4;10799:16;;;10795:27;10792:47;;;10835:1;10832;10825:12;10792:47;10861:22;;:::i;:::-;10906:32;10935:2;10906:32;:::i;:::-;10899:5;10892:47;10985:2;10981;10977:11;10971:18;10966:2;10959:5;10955:14;10948:42;11036:2;11032;11028:11;11022:18;11017:2;11010:5;11006:14;10999:42;11087:2;11083;11079:11;11073:18;11068:2;11061:5;11057:14;11050:42;11131:3;11127:2;11123:12;11117:19;11161:2;11151:8;11148:16;11145:36;;;11177:1;11174;11167:12;11145:36;11214:55;11261:7;11250:8;11246:2;11242:17;11214:55;:::i;:::-;11208:3;11201:5;11197:15;11190:80;;11309:3;11305:2;11301:12;11295:19;11339:2;11329:8;11326:16;11323:36;;;11355:1;11352;11345:12;11323:36;11392:55;11439:7;11428:8;11424:2;11420:17;11392:55;:::i;:::-;11386:3;11379:5;11375:15;11368:80;;11487:3;11483:2;11479:12;11473:19;11517:2;11507:8;11504:16;11501:36;;;11533:1;11530;11523:12;11501:36;11570:55;11617:7;11606:8;11602:2;11598:17;11570:55;:::i;:::-;11564:3;11553:15;;11546:80;-1:-1:-1;11690:2:32;11675:18;;;;11669:25;11557:5;;11669:25;;-1:-1:-1;;;;;10436:1264:32:o;11958:458::-;12218:1;12214;12209:3;12205:11;12201:19;12193:6;12189:32;12178:9;12171:51;12258:6;12253:2;12242:9;12238:18;12231:34;12301:3;12296:2;12285:9;12281:18;12274:31;12152:4;12322:45;12362:3;12351:9;12347:19;12339:6;12322:45;:::i;:::-;12314:53;;12403:6;12398:2;12387:9;12383:18;12376:34;11958:458;;;;;;;:::o;12421:361::-;12538:12;;12586:4;12575:16;;12569:23;-1:-1:-1;;;;;;12649:11:32;;;;12538:12;12569:23;12683:1;12672:13;;12669:107;;;12763:2;12757;12747:6;12744:1;12740:14;12737:1;12733:22;12729:31;12725:2;12721:40;12717:49;12708:58;;12669:107;;;;12421:361;;;:::o;13650:331::-;13755:9;13766;13808:8;13796:10;13793:24;13790:44;;;13830:1;13827;13820:12;13790:44;13859:6;13849:8;13846:20;13843:40;;;13879:1;13876;13869:12;13843:40;-1:-1:-1;;13905:23:32;;;13950:25;;;;;-1:-1:-1;13650:331:32:o;13986:255::-;14106:19;;14145:2;14137:11;;14134:101;;;-1:-1:-1;;14206:2:32;14202:12;;;14199:1;14195:20;14191:33;14180:45;13986:255;;;;:::o;14246:514::-;14541:3;14530:9;14523:22;14504:4;14562:56;14613:3;14602:9;14598:19;14590:6;14562:56;:::i;:::-;14554:64;;14627:58;14681:2;14670:9;14666:18;14658:6;4368:12;;4356:25;;4430:4;4419:16;;;4413:23;4397:14;;4390:47;4290:153;14627:58;-1:-1:-1;;;;;14721:32:32;;;;14716:2;14701:18;;;;14694:60;14246:514;;-1:-1:-1;;14246:514:32:o;14765:924::-;14904:6;14912;14956:9;14947:7;14943:23;14986:3;14982:2;14978:12;14975:32;;;15003:1;15000;14993:12;14975:32;15027:4;15023:2;15019:13;15016:33;;;15045:1;15042;15035:12;15016:33;;15078:2;15072:9;15120:4;15112:6;15108:17;15144:18;15212:6;15200:10;15197:22;15192:2;15180:10;15177:18;15174:46;15171:72;;;15223:18;;:::i;:::-;15263:10;15259:2;15252:22;15304:9;15298:16;15290:6;15283:32;15358:2;15347:9;15343:18;15337:25;15324:38;;15402:2;15395:5;15391:14;15384:5;15381:25;15371:53;;15420:1;15417;15410:12;15371:53;-1:-1:-1;15452:2:32;15440:15;;15433:30;15496:70;15558:7;15553:2;15538:18;;15496:70;:::i;:::-;15491:2;15479:15;;15472:95;15483:6;-1:-1:-1;15611:72:32;15675:7;15668:4;15653:20;;15611:72;:::i;:::-;15601:82;;14765:924;;;;;:::o;16353:323::-;-1:-1:-1;;;;;;16473:19:32;;16549:11;;;;16580:1;16572:10;;16569:101;;;16657:2;16651;16644:3;16641:1;16637:11;16634:1;16630:19;16626:28;16622:2;16618:37;16614:46;16605:55;;16569:101;;;16353:323;;;;:::o

ipfs://7dd31700f4d7c3f34c441cbb3740efb0d0a50905336843e69cd522dd9fba02fb