Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.25;

import "../interfaces/utils/IDepositWrapper.sol";

contract DepositWrapper is IDepositWrapper {
    using SafeERC20 for IERC20;

    /// @inheritdoc IDepositWrapper
    address public immutable weth;
    /// @inheritdoc IDepositWrapper
    address public immutable steth;
    /// @inheritdoc IDepositWrapper
    address public immutable wsteth;
    /// @inheritdoc IDepositWrapper
    IVault public immutable vault;

    constructor(IVault vault_, address weth_, address steth_, address wsteth_) {
        vault = vault_;
        weth = weth_;
        steth = steth_;
        wsteth = wsteth_;
    }

    function _wethToWsteth(uint256 amount) private returns (uint256) {
        IWeth(weth).withdraw(amount);
        return _ethToWsteth(amount);
    }

    function _ethToWsteth(uint256 amount) private returns (uint256) {
        ISteth(steth).submit{value: amount}(address(0));
        return _stethToWsteth(amount);
    }

    function _stethToWsteth(uint256 amount) private returns (uint256) {
        IERC20(steth).safeIncreaseAllowance(wsteth, amount);
        IWSteth(wsteth).wrap(amount);
        return IERC20(wsteth).balanceOf(address(this));
    }

    /// @inheritdoc IDepositWrapper
    function deposit(
        address to,
        address token,
        uint256 amount,
        uint256 minLpAmount,
        uint256 deadline
    ) external payable returns (uint256 lpAmount) {
        address wrapper = address(this);
        address sender = msg.sender;
        address[] memory tokens = vault.underlyingTokens();
        if (tokens.length != 1 || tokens[0] != wsteth)
            revert InvalidTokenList();
        if (amount == 0) revert InvalidAmount();
        if (token == steth) {
            IERC20(steth).safeTransferFrom(sender, wrapper, amount);
            amount = _stethToWsteth(amount);
        } else if (token == weth) {
            IERC20(weth).safeTransferFrom(sender, wrapper, amount);
            amount = _wethToWsteth(amount);
        } else if (token == address(0)) {
            if (msg.value != amount) revert InvalidAmount();
            amount = _ethToWsteth(amount);
        } else if (wsteth == token) {
            IERC20(wsteth).safeTransferFrom(sender, wrapper, amount);
        } else revert InvalidToken();

        IERC20(wsteth).safeIncreaseAllowance(address(vault), amount);
        uint256[] memory amounts = new uint256[](1);
        amounts[0] = amount;
        (, lpAmount) = vault.deposit(to, amounts, minLpAmount, deadline);
        uint256 balance = IERC20(wsteth).balanceOf(wrapper);
        if (balance > 0) IERC20(wsteth).safeTransfer(sender, balance);
        emit DepositWrapperDeposit(sender, token, amount, lpAmount, deadline);
    }

    receive() external payable {
        if (msg.sender != address(weth)) revert InvalidSender();
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.25;

import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

import "../external/lido/IWeth.sol";
import "../external/lido/ISteth.sol";
import "../external/lido/IWSteth.sol";

import "../IVault.sol";

/**
 * @title IDepositWrapper
 * @notice Interface defining the functions for wrapping tokens before deposit into a vault.
 */
interface IDepositWrapper {
    /// @dev Errors
    error AddressZero();
    error InvalidToken();
    error InvalidAmount();
    error InvalidTokenList();
    error InvalidSender();

    /**
     * @notice Returns the address of the WETH token.
     * @return The address of the WETH token.
     */
    function weth() external view returns (address);

    /**
     * @notice Returns the address of the stETH token.
     * @return The address of the stETH token.
     */
    function steth() external view returns (address);

    /**
     * @notice Returns the address of the wstETH token.
     * @return The address of the wstETH token.
     */
    function wsteth() external view returns (address);

    /**
     * @notice Returns the address of the vault to which deposits are made.
     * @return The address of the vault.
     */
    function vault() external view returns (IVault);

    /**
     * @notice Deposits specified tokens into the vault, converting them to the required format if necessary.
     * @param to The address that will receive the resulting LP tokens.
     * @param token The address of the token to deposit (can be WETH, stETH, wstETH, or ETH).
     * @param amount The amount of tokens to deposit.
     * @param minLpAmount The minimum number of LP tokens expected from the deposit.
     * @param deadline The deadline timestamp for the deposit transaction.
     * @return lpAmount The amount of LP tokens obtained from the deposit.
     */
    function deposit(
        address to,
        address token,
        uint256 amount,
        uint256 minLpAmount,
        uint256 deadline
    ) external payable returns (uint256 lpAmount);

    /**
     * @notice Emitted when a deposit is executed in the Deposit Wrapper contract.
     * @param sender The address of the account initiating the deposit.
     * @param token The address of the token being deposited.
     * @param amount The amount of the token being deposited.
     * @param lpAmount The amount of LP tokens received after the deposit.
     * @param deadline The deadline by which the deposit must be executed.
     */
    event DepositWrapperDeposit(
        address indexed sender,
        address token,
        uint256 amount,
        uint256 lpAmount,
        uint256 deadline
    );
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.25;

interface IWeth {
    function deposit() external payable;
    function withdraw(uint256 amount) external;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.25;

interface ISteth {
    function submit(address _referral) external payable returns (uint256);

    function getBufferedEther() external view returns (uint256);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.25;

interface IWSteth {
    function wrap(uint256 stethAmount) external payable returns (uint256);

    function unwrap(uint256 wstethAmount) external returns (uint256);

    function getStETHByWstETH(
        uint256 wstethAmount
    ) external view returns (uint256);

    function getWstETHByStETH(
        uint256 stethAmount
    ) external view returns (uint256);
}

// SPDX-License-Identifier: BSL-1.1
pragma solidity 0.8.25;

import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
import "@openzeppelin/contracts/utils/Arrays.sol";

import "./modules/ITvlModule.sol";
import "./validators/IValidator.sol";

import "./oracles/IPriceOracle.sol";
import "./oracles/IRatiosOracle.sol";

import "./utils/IDepositCallback.sol";
import "./utils/IWithdrawalCallback.sol";

import "./IVaultConfigurator.sol";

/**
 * @title IVault
 * @notice Interface defining core methods, constants, and errors for vault contracts.
 * Includes events, data structures, functions, and permissions required for managing the vault.
 * @dev Main contract of the system managing interactions between users, administrators, and operators.
 *      System parameters are set within the corresponding contract - VaultConfigurator.
 *      Upon deposit, LP tokens are issued to users based on asset valuation by oracles.
 *      Deposits are made through the deposit function, where a deposit can only be made in underlyingTokens and
 *      only at the specified ratiosOracle ratio. Deposits can be paused by setting the isDepositLocked flag.
 *
 *      Withdrawals can occur through two scenarios:
 *          - Regular withdrawal via the registerWithdrawal function and emergency withdrawal via the emergencyWithdraw function.
 *          In a regular withdrawal, the user registers a withdrawal request, after which the operator must perform a series of operations
 *          to ensure there are enough underlyingTokens on the vault's balance to fulfill the user's request. Subsequently, the operator must call
 *          the processWithdrawals function. If a user's request is not processed within the emergencyWithdrawalDelay period, the user can perform an emergency withdrawal.
 *          Note! In this case, the user may receive less funds than entitled by the system, as this function only handles ERC20 tokens in the system.
 *          Therefore, if the system has a base asset that is not represented as an ERC20 token, the corresponding portion of the funds will be lost by the user.
 *
 *      It is assumed that the main system management will occur through calls to delegateModules via delegateCalls on behalf of the operator.
 *      For this to be possible, certain conditions must be met:
 *          - From the validator's perspective, two conditions must be met:
 *              1. The caller must have the right to call the delegateCall function with the corresponding data parameter.
 *              2. The contract itself must be able to call the function on the delegateModule with the specified data.
 *          - From the configurator's perspective, the called module must have the appropriate approval - isDelegateModuleApproved.
 *
 *      If external calls need to be made, the externalCall function is used, for the execution of which a similar set of properties exists:
 *          - From the validator's perspective, two conditions must be met:
 *              1. The caller must have the right to call the externalCall function with the corresponding data parameter.
 *              2. The contract itself must be able to call the function on the external contract with the specified data.
 *          - From the configurator's perspective, the called contract must NOT have isDelegateModuleApproved permission.
 *
 *      Vault also has the functionality of adding and removing underlyingTokens, as well as tvlModules.
 *      For this purpose, the following functions are available, which can only be called by the vault's admin:
 *          - addToken
 *          - removeToken
 *          - addTvlModule
 *          - removeTvlModule
 *      Upon calling removeToken, it is checked that the underlyingTvl function for the specified token returns a zero value. Otherwise, the function reverts with a NonZeroValue error.
 *      It is important to note that there is no such check when calling removeTvlModule, so when updating parameters, sequential execution of a transaction to remove the old and add the new tvlModule is implied.
 */
interface IVault is IERC20 {
    /// @dev Errors
    error Deadline();
    error InvalidState();
    error InvalidLength();
    error InvalidToken();
    error NonZeroValue();
    error ValueZero();
    error InsufficientLpAmount();
    error InsufficientAmount();
    error LimitOverflow();
    error AlreadyAdded();

    /// @notice Struct representing a user's withdrawal request.
    struct WithdrawalRequest {
        address to;
        uint256 lpAmount;
        bytes32 tokensHash; // keccak256 hash of the tokens array at the moment of request
        uint256[] minAmounts;
        uint256 deadline;
        uint256 timestamp;
    }

    /// @notice Struct representing the current state used for processing withdrawals.
    struct ProcessWithdrawalsStack {
        address[] tokens;
        uint128[] ratiosX96;
        uint256[] erc20Balances;
        uint256 totalSupply;
        uint256 totalValue;
        uint256 ratiosX96Value;
        uint256 timestamp;
        uint256 feeD9;
        bytes32 tokensHash; // keccak256 hash of the tokens array at the moment of the call
    }

    /// @notice 2^96, used for fixed-point arithmetic
    function Q96() external view returns (uint256);

    /// @notice Multiplier of 1e9
    function D9() external view returns (uint256);

    /// @notice Returns the vault's configurator, which handles permissions and configuration settings.
    /// @return IVaultConfigurator The address of the configurator contract.
    function configurator() external view returns (IVaultConfigurator);

    /// @notice Returns the withdrawal request of a given user.
    /// @param user The address of the user.
    /// @return request The withdrawal request associated with the user.
    function withdrawalRequest(
        address user
    ) external view returns (WithdrawalRequest memory request);

    /// @return count The number of users with pending withdrawal requests.
    function pendingWithdrawersCount() external view returns (uint256 count);

    /// @notice Returns an array of addresses with pending withdrawal requests.
    /// @return users An array of addresses with pending withdrawal requests.
    function pendingWithdrawers()
        external
        view
        returns (address[] memory users);

    /// @notice Returns an array of addresses with pending withdrawal requests.
    /// @param limit The maximum number of users to return.
    /// @param offset The number of users to skip before returning.
    /// @return users An array of addresses with pending withdrawal requests.
    function pendingWithdrawers(
        uint256 limit,
        uint256 offset
    ) external view returns (address[] memory users);

    /// @notice Returns an array of underlying tokens of the vault.
    /// @return underlyinigTokens_ An array of underlying token addresses.
    function underlyingTokens()
        external
        view
        returns (address[] memory underlyinigTokens_);

    /// @notice Checks if a token is an underlying token of the vault.
    /// @return isUnderlyingToken_ true if the token is an underlying token of the vault.
    function isUnderlyingToken(
        address token
    ) external view returns (bool isUnderlyingToken_);

    /// @notice Returns an array of addresses of all TVL modules.
    /// @return tvlModules_ An array of TVL module addresses.
    function tvlModules() external view returns (address[] memory tvlModules_);

    /// @notice Calculates and returns the total value locked (TVL) of the underlying tokens.
    /// @return tokens An array of underlying token addresses.
    /// @return amounts An array of the amounts of each underlying token in the TVL.
    function underlyingTvl()
        external
        view
        returns (address[] memory tokens, uint256[] memory amounts);

    /// @notice Calculates and returns the base TVL (Total Value Locked) across all tokens in the vault.
    /// @return tokens An array of token addresses.
    /// @return amounts An array of the amounts of each token in the base TVL.
    function baseTvl()
        external
        view
        returns (address[] memory tokens, uint256[] memory amounts);

    /// @notice Adds a new token to the list of underlying tokens in the vault.
    /// @dev Only accessible by an admin.
    /// @param token The address of the token to add.
    function addToken(address token) external;

    /// @notice Removes a token from the list of underlying tokens in the vault.
    /// @dev Only accessible by an admin.
    /// @param token The address of the token to remove.
    function removeToken(address token) external;

    /// @notice Adds a new TVL module to the vault.
    /// @dev Only accessible by an admin.
    /// @param module The address of the TVL module to add.
    function addTvlModule(address module) external;

    /// @notice Removes an existing TVL module from the vault.
    /// @dev Only accessible by an admin.
    /// @param module The address of the TVL module to remove.
    function removeTvlModule(address module) external;

    /// @notice Performs an external call to a given address with specified data.
    /// @dev Only operators or admins should call this function. Checks access permissions.
    /// @param to The address to which the call will be made.
    /// @param data The calldata to use for the external call.
    /// @return success Indicates if the call was successful.
    /// @return response The response data from the external call.
    /// @dev Checks permissions using the validator from the configurator.
    function externalCall(
        address to,
        bytes calldata data
    ) external returns (bool success, bytes memory response);

    /// @notice Executes a delegate call to a specified address with given data.
    /// @dev Only operators or admins should call this function. Checks access permissions.
    /// @param to The address to which the delegate call will be made.
    /// @param data The calldata to use for the delegate call.
    /// @return success Indicates if the delegate call was successful.
    /// @return response The response data from the delegate call.
    /// @dev Checks permissions using the validator from the configurator.
    function delegateCall(
        address to,
        bytes calldata data
    ) external returns (bool success, bytes memory response);

    /// @notice Deposits specified amounts of tokens into the vault in exchange for LP tokens.
    /// @dev Only accessible when deposits are unlocked.
    /// @param to The address to receive LP tokens.
    /// @param amounts An array specifying the amounts for each underlying token.
    /// @param minLpAmount The minimum amount of LP tokens to mint.
    /// @param deadline The time before which the operation must be completed.
    /// @return actualAmounts The actual amounts deposited for each underlying token.
    /// @return lpAmount The amount of LP tokens minted.
    function deposit(
        address to,
        uint256[] memory amounts,
        uint256 minLpAmount,
        uint256 deadline
    ) external returns (uint256[] memory actualAmounts, uint256 lpAmount);

    /// @notice Handles emergency withdrawals, proportionally withdrawing all tokens in the system (not just the underlying).
    /// @dev Transfers tokens based on the user's share of lpAmount / totalSupply.
    /// @param minAmounts An array of minimum amounts expected for each underlying token.
    /// @param deadline The time before which the operation must be completed.
    /// @return actualAmounts The actual amounts withdrawn for each token.
    function emergencyWithdraw(
        uint256[] memory minAmounts,
        uint256 deadline
    ) external returns (uint256[] memory actualAmounts);

    /// @notice Cancels a pending withdrawal request.
    function cancelWithdrawalRequest() external;

    /// @notice Registers a new withdrawal request, optionally closing previous requests.
    /// @param to The address to receive the withdrawn tokens.
    /// @param lpAmount The amount of LP tokens to withdraw.
    /// @param minAmounts An array specifying minimum amounts for each token.
    /// @param deadline The time before which the operation must be completed.
    /// @param requestDeadline The deadline before which the request should be fulfilled.
    /// @param closePrevious Whether to close a previous request if it exists.
    function registerWithdrawal(
        address to,
        uint256 lpAmount,
        uint256[] memory minAmounts,
        uint256 deadline,
        uint256 requestDeadline,
        bool closePrevious
    ) external;

    /// @notice Analyzes a withdrawal request based on the current vault state.
    /// @param s The current state stack to use for analysis.
    /// @param request The withdrawal request to analyze.
    /// @return processingPossible Whether processing is possible based on current vault state.
    /// @return withdrawalPossible Whether the withdrawal can be fulfilled.
    /// @return expectedAmounts The expected amounts to be withdrawn for each token.
    function analyzeRequest(
        ProcessWithdrawalsStack memory s,
        WithdrawalRequest memory request
    )
        external
        pure
        returns (
            bool processingPossible,
            bool withdrawalPossible,
            uint256[] memory expectedAmounts
        );

    /// @notice Calculates and returns the state stack required for processing withdrawal requests.
    /// @return s The state stack with current vault balances and data.
    function calculateStack()
        external
        view
        returns (ProcessWithdrawalsStack memory s);

    /// @notice Processes multiple withdrawal requests by fulfilling eligible withdrawals.
    /// @param users An array of user addresses whose withdrawal requests should be processed.
    /// @return statuses An array indicating the status of each user's withdrawal request.
    function processWithdrawals(
        address[] memory users
    ) external returns (bool[] memory statuses);

    /**
     * @notice Emitted when a token is added to the vault.
     * @param token The address of the token added.
     */
    event TokenAdded(address token);

    /**
     * @notice Emitted when a token is removed from the vault.
     * @param token The address of the token removed.
     */
    event TokenRemoved(address token);

    /**
     * @notice Emitted when a TVL module is added to the vault.
     * @param module The address of the TVL module added.
     */
    event TvlModuleAdded(address module);

    /**
     * @notice Emitted when a TVL module is removed from the vault.
     * @param module The address of the TVL module removed.
     */
    event TvlModuleRemoved(address module);

    /**
     * @notice Emitted when an external call is made.
     * @param to The address of the contract called.
     * @param data The calldata of the call.
     * @param success The success status of the call.
     * @param response The response data of the call.
     */
    event ExternalCall(
        address indexed to,
        bytes data,
        bool success,
        bytes response
    );

    /**
     * @notice Emitted when a delegate call is made.
     * @param to The address of the contract called.
     * @param data The calldata of the call.
     * @param success The success status of the call.
     * @param response The response data of the call.
     */
    event DelegateCall(
        address indexed to,
        bytes data,
        bool success,
        bytes response
    );

    /**
     * @notice Emitted when a deposit occurs.
     * @param to The address where LP tokens are deposited.
     * @param amounts The amounts of tokens deposited.
     * @param lpAmount The amount of LP tokens minted.
     */
    event Deposit(address indexed to, uint256[] amounts, uint256 lpAmount);

    /**
     * @notice Emitted when a deposit callback occurs.
     * @param callback The address of the deposit callback contract.
     * @param amounts The amounts of tokens deposited.
     * @param lpAmount The amount of LP tokens minted.
     */
    event DepositCallback(
        address indexed callback,
        uint256[] amounts,
        uint256 lpAmount
    );

    /**
     * @notice Emitted when a withdrawal request is made.
     * @param from The address of the user making the request.
     * @param request The details of the withdrawal request.
     */
    event WithdrawalRequested(address indexed from, WithdrawalRequest request);

    /**
     * @notice Emitted when a withdrawal request is canceled.
     * @param user The address of the user canceling the request.
     * @param origin The origin of the cancellation.
     */
    event WithdrawalRequestCanceled(address indexed user, address origin);

    /**
     * @notice Emitted when an emergency withdrawal occurs.
     * @param from The address of the user initiating the emergency withdrawal.
     * @param request The details of the withdrawal request.
     * @param amounts The actual amounts withdrawn.
     */
    event EmergencyWithdrawal(
        address indexed from,
        WithdrawalRequest request,
        uint256[] amounts
    );

    /**
     * @notice Emitted when withdrawals are processed.
     * @param users The addresses of the users whose withdrawals are processed.
     * @param statuses The statuses of the withdrawal processing.
     */
    event WithdrawalsProcessed(address[] users, bool[] statuses);

    /**
     * @notice Emitted when a withdrawal callback occurs.
     * @param callback The address of the withdrawal callback contract.
     */
    event WithdrawCallback(address indexed callback);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "./IERC20.sol";
import {IERC20Metadata} from "./extensions/IERC20Metadata.sol";
import {Context} from "../../utils/Context.sol";
import {IERC20Errors} from "../../interfaces/draft-IERC6093.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 */
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
    mapping(address account => uint256) private _balances;

    mapping(address account => mapping(address spender => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            _totalSupply += value;
        } else {
            uint256 fromBalance = _balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                _balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                _totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                _balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     * ```
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        _allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/ReentrancyGuard.sol)

pragma solidity ^0.8.20;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant NOT_ENTERED = 1;
    uint256 private constant ENTERED = 2;

    uint256 private _status;

    /**
     * @dev Unauthorized reentrant call.
     */
    error ReentrancyGuardReentrantCall();

    constructor() {
        _status = NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be NOT_ENTERED
        if (_status == ENTERED) {
            revert ReentrancyGuardReentrantCall();
        }

        // Any calls to nonReentrant after this point will fail
        _status = ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Arrays.sol)

pragma solidity ^0.8.20;

import {StorageSlot} from "./StorageSlot.sol";
import {Math} from "./math/Math.sol";

/**
 * @dev Collection of functions related to array types.
 */
library Arrays {
    using StorageSlot for bytes32;

    /**
     * @dev Searches a sorted `array` and returns the first index that contains
     * a value greater or equal to `element`. If no such index exists (i.e. all
     * values in the array are strictly less than `element`), the array length is
     * returned. Time complexity O(log n).
     *
     * `array` is expected to be sorted in ascending order, and to contain no
     * repeated elements.
     */
    function findUpperBound(uint256[] storage array, uint256 element) internal view returns (uint256) {
        uint256 low = 0;
        uint256 high = array.length;

        if (high == 0) {
            return 0;
        }

        while (low < high) {
            uint256 mid = Math.average(low, high);

            // Note that mid will always be strictly less than high (i.e. it will be a valid array index)
            // because Math.average rounds towards zero (it does integer division with truncation).
            if (unsafeAccess(array, mid).value > element) {
                high = mid;
            } else {
                low = mid + 1;
            }
        }

        // At this point `low` is the exclusive upper bound. We will return the inclusive upper bound.
        if (low > 0 && unsafeAccess(array, low - 1).value == element) {
            return low - 1;
        } else {
            return low;
        }
    }

    /**
     * @dev Access an array in an "unsafe" way. Skips solidity "index-out-of-range" check.
     *
     * WARNING: Only use if you are certain `pos` is lower than the array length.
     */
    function unsafeAccess(address[] storage arr, uint256 pos) internal pure returns (StorageSlot.AddressSlot storage) {
        bytes32 slot;
        // We use assembly to calculate the storage slot of the element at index `pos` of the dynamic array `arr`
        // following https://docs.soliditylang.org/en/v0.8.20/internals/layout_in_storage.html#mappings-and-dynamic-arrays.

        /// @solidity memory-safe-assembly
        assembly {
            mstore(0, arr.slot)
            slot := add(keccak256(0, 0x20), pos)
        }
        return slot.getAddressSlot();
    }

    /**
     * @dev Access an array in an "unsafe" way. Skips solidity "index-out-of-range" check.
     *
     * WARNING: Only use if you are certain `pos` is lower than the array length.
     */
    function unsafeAccess(bytes32[] storage arr, uint256 pos) internal pure returns (StorageSlot.Bytes32Slot storage) {
        bytes32 slot;
        // We use assembly to calculate the storage slot of the element at index `pos` of the dynamic array `arr`
        // following https://docs.soliditylang.org/en/v0.8.20/internals/layout_in_storage.html#mappings-and-dynamic-arrays.

        /// @solidity memory-safe-assembly
        assembly {
            mstore(0, arr.slot)
            slot := add(keccak256(0, 0x20), pos)
        }
        return slot.getBytes32Slot();
    }

    /**
     * @dev Access an array in an "unsafe" way. Skips solidity "index-out-of-range" check.
     *
     * WARNING: Only use if you are certain `pos` is lower than the array length.
     */
    function unsafeAccess(uint256[] storage arr, uint256 pos) internal pure returns (StorageSlot.Uint256Slot storage) {
        bytes32 slot;
        // We use assembly to calculate the storage slot of the element at index `pos` of the dynamic array `arr`
        // following https://docs.soliditylang.org/en/v0.8.20/internals/layout_in_storage.html#mappings-and-dynamic-arrays.

        /// @solidity memory-safe-assembly
        assembly {
            mstore(0, arr.slot)
            slot := add(keccak256(0, 0x20), pos)
        }
        return slot.getUint256Slot();
    }

    /**
     * @dev Access an array in an "unsafe" way. Skips solidity "index-out-of-range" check.
     *
     * WARNING: Only use if you are certain `pos` is lower than the array length.
     */
    function unsafeMemoryAccess(uint256[] memory arr, uint256 pos) internal pure returns (uint256 res) {
        assembly {
            res := mload(add(add(arr, 0x20), mul(pos, 0x20)))
        }
    }

    /**
     * @dev Access an array in an "unsafe" way. Skips solidity "index-out-of-range" check.
     *
     * WARNING: Only use if you are certain `pos` is lower than the array length.
     */
    function unsafeMemoryAccess(address[] memory arr, uint256 pos) internal pure returns (address res) {
        assembly {
            res := mload(add(add(arr, 0x20), mul(pos, 0x20)))
        }
    }
}

// SPDX-License-Identifier: BSL-1.1
pragma solidity 0.8.25;

/**
 * @title ITvlModule
 * @notice Interface for a Total Value Locked (TVL) module, providing information about token balances.
 */
interface ITvlModule {
    // Structure representing TVL data for a token
    struct Data {
        address token; // Address of the token
        address underlyingToken; // Address of the underlying token
        uint256 amount; // Current amount of the token
        uint256 underlyingAmount; // Current amount of the underlying token
        bool isDebt; // Flag indicating if the token represents debt
    }

    /**
     * @notice Returns Total Value Locked (TVL) data for a specific user.
     * @param user The address of the user.
     * @return data An array of TVL data for each token held by the user.
     */
    function tvl(address user) external view returns (Data[] memory data);
}

// SPDX-License-Identifier: BSL-1.1
pragma solidity 0.8.25;

/**
 * @title IValidator
 * @notice Interface defining a generic validator for transaction data.
 */
interface IValidator {
    /**
     * @notice Validates a transaction involving two addresses based on the provided calldata.
     * @param from The address initiating the transaction.
     * @param to The target address of the transaction.
     * @param data The transaction data containing the function selector and any necessary parameters.
     * @dev Implementers should validate that the transaction is authorized, properly formatted, and adheres to the required business logic.
     *      Reverts if the transaction is invalid.
     */
    function validate(
        address from,
        address to,
        bytes calldata data
    ) external view;
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.25;

/**
 * @title IPriceOracle
 * @notice Interface defining a standard price oracle that provides token prices in 96-bit precision.
 */
interface IPriceOracle {
    /**
     * @notice Returns the price of a specific token relative to the base token of the given vault, expressed in 96-bit precision.
     * @param vault The address of the vault requesting the price.
     * @param token The address of the token to calculate the price for.
     * @return priceX96_ The price of the token relative to the base token, using 96-bit precision.
     * @dev Implementations should ensure prices are accurate and may involve external oracle data.
     *      Reverts with an appropriate error if the price cannot be provided.
     */
    function priceX96(
        address vault,
        address token
    ) external view returns (uint256 priceX96_);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.25;

/**
 * @title IRatiosOracle
 * @notice Interface for a ratios oracle, providing the target allocation ratios for a vault.
 */
interface IRatiosOracle {
    /**
     * @notice Retrieves the target allocation ratios (using 96-bit precision) for a specific vault's tokens.
     * @param vault The address of the vault requesting the ratios.
     * @param isDeposit A boolean indicating whether the ratios are for a deposit or a withdrawal.
     * @return ratiosX96 An array representing the target ratios for each token, expressed in 96-bit precision.
     * @dev The array of ratios should align with the underlying tokens associated with the vault.
     *      Reverts if the ratios cannot be provided due to missing or mismatched data.
     */
    function getTargetRatiosX96(
        address vault,
        bool isDeposit
    ) external view returns (uint128[] memory ratiosX96);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.25;

/**
 * @title IDepositCallback
 * @notice Interface defining a callback function to handle deposit results.
 */
interface IDepositCallback {
    /**
     * @notice Handles the callback after a deposit operation has been executed.
     * @param actualAmounts An array representing the actual amounts of each token that were deposited.
     * @param lpAmount The total amount of LP tokens that were issued as a result of the deposit.
     * @dev This function is intended to be implemented by contracts that need to take further action following a deposit.
     */
    function depositCallback(
        uint256[] memory actualAmounts,
        uint256 lpAmount
    ) external;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.25;

/**
 * @title IWithdrawalCallback
 * @notice Interface defining a callback function to handle post-withdrawal actions in processWithdrawals function.
 */
interface IWithdrawalCallback {
    /**
     * @notice Handles the callback after a withdrawal operation has been executed.
     * @dev This function should be implemented to carry out any additional actions required after the withdrawal.
     *      It does not take any parameters and will be invoked once the withdrawal process is complete.
     */
    function withdrawalCallback() external;
}

// SPDX-License-Identifier: BSL-1.1
pragma solidity 0.8.25;

import "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
import "./IVault.sol";

/**
 * @title IVaultConfigurator
 * @notice Contract defining the configuration and access control for a vault system.
 *         This interface specifies the parameters for the primary Vault contract,
 *         facilitating secure configuration updates through a two-stage process: staging and committing, with each parameter update subject to a specified delay.
 *         The stage function sets the new value and timestamp for the parameter, while the commit function finalizes the update
 *
 *         The delay parameter is expressed in seconds and is defined for each parameter of this contract as follows:
 *            - baseDelay: the base delay for stage/commit operations
 *            - depositCallbackDelay: delay for changing the deposit callback contract address
 *            - withdrawalCallbackDelay: delay for changing the withdrawal callback contract address
 *            - withdrawalFeeD9Delay: delay for changing the withdrawal fee
 *            - isDepositLockedDelay: delay for locking deposits
 *            - areTransfersLockedDelay: delay for locking LP token transfers
 *            - delegateModuleApprovalDelay: delay for approving delegated modules
 *            - maximalTotalSupplyDelay: delay for changing the maximum total supply
 *            - ratiosOracleDelay: delay for changing the ratios oracle address
 *            - priceOracleDelay: delay for changing the price oracle address
 *            - validatorDelay: delay for changing the validator address
 *            - emergencyWithdrawalDelay: delay for withdrawing funds after calling registerWithdrawal
 *
 *         Each of the above parameters has a pair of functions, stage/commit, through which their updates occur. The delay for all these parameters is set to baseDelay.
 *
 *         With the exception of functions for isDepositLocked parameter, all mutable functions of the contract can only be called by the vault's admin.
 *         Function for isDepositLocked parameter can be called by either the operator or the vault's admin
 *         to enable faster deposit locking if deemed necessary from the operator/strategy standpoint.
 */
interface IVaultConfigurator {
    /// @dev Errors
    error AddressZero();
    error InvalidDelay();
    error InvalidTimestamp();
    error InvalidWithdrawalFee();
    error InvalidTotalSupply();

    /// @notice Struct to represent a staged data change with a delay period.
    struct Data {
        uint256 value; // Current value
        uint256 stagedValue; // Staged value waiting to be committed
        uint256 stageTimestamp; // Timestamp of staging
    }

    /// @notice Returns the maximum allowed delay for any staged data.
    /// @return uint256 The constant `MAX_DELAY` indicating the maximum delay period (365 days).
    function MAX_DELAY() external pure returns (uint256);

    /// @notice Returns the maximum withdrawal fee allowed.
    /// @return uint256 The constant `MAX_WITHDRAWAL_FEE` indicating the maximum withdrawal fee (5%).
    function MAX_WITHDRAWAL_FEE() external pure returns (uint256);

    /// @notice Returns the address of the vault associated with this configurator.
    /// @return address of the vault contract.
    function vault() external view returns (address);

    ///@notice Stages an approval for the specified delegate module.
    /// @param module The address of the module to approve.
    function stageDelegateModuleApproval(address module) external;

    /// @notice Commits the previously staged delegate module approval after the delay period.
    /// @param module The address of the module to approve.
    function commitDelegateModuleApproval(address module) external;

    /// @notice Rolls back any staged delegate module approval.
    /// @param module The address of the module to roll back.
    function rollbackStagedDelegateModuleApproval(address module) external;

    /// @notice @notice Revokes the approval of the specified delegate module.
    /// @param module The address of the module to revoke approval from.
    function revokeDelegateModuleApproval(address module) external;

    /// @notice Returns the base delay value for all staging operations.
    /// @return uint256 The base delay value in seconds.
    function baseDelay() external view returns (uint256);

    /// @notice Checks if the specified delegate module is approved for use.
    /// @param module The address of the module to check.
    /// @return bool `true` if the module is approved, otherwise `false`.
    function isDelegateModuleApproved(
        address module
    ) external view returns (bool);

    /// @notice Returns whether deposits are currently locked.
    /// @notice operator owned parameter.
    /// @return bool `true` if deposits are locked, otherwise `false`.
    function isDepositLocked() external view returns (bool);

    /// @notice Returns whether LP token transfers are currently locked.
    /// @notice admin owned parameter.
    /// @return bool `true` if transfers are locked, otherwise `false`.
    function areTransfersLocked() external view returns (bool);

    /// @notice Returns the maximum total supply of LP tokens allowed.
    /// @return uint256 The maximum total supply of LP tokens.
    function maximalTotalSupply() external view returns (uint256);

    /// @notice Returns the address of the deposit callback contract.
    /// @return address The address of the deposit callback contract.
    function depositCallback() external view returns (address);

    /// @notice Returns the address of the withdrawal callback contract.
    /// @return address The address of the withdrawal callback contract.
    function withdrawalCallback() external view returns (address);

    /// @notice Returns the current withdrawal fee in D9 format.
    /// @return uint256 The withdrawal fee, represented as an integer with 9 decimal places.
    function withdrawalFeeD9() external view returns (uint256);

    /// @notice Returns the delay for committing deposit callback changes.
    /// @return uint256 The delay in seconds.
    function depositCallbackDelay() external view returns (uint256);

    /// @notice Returns the delay for committing withdrawal callback changes.
    /// @return uint256 The delay in seconds.
    function withdrawalCallbackDelay() external view returns (uint256);

    /// @notice Returns the delay for committing withdrawal fee changes.
    /// @return uint256 The delay in seconds.
    function withdrawalFeeD9Delay() external view returns (uint256);

    /// @notice Returns the delay for committing deposit locks.
    /// @return uint256 The delay in seconds.
    function isDepositLockedDelay() external view returns (uint256);

    /// @notice Returns the delay for committing transfers locks.
    /// @return uint256 The delay in seconds.
    function areTransfersLockedDelay() external view returns (uint256);

    /// @notice Returns the delay for committing delegate module approvals.
    /// @return uint256 The delay in seconds.
    function delegateModuleApprovalDelay() external view returns (uint256);

    /// @notice Returns the delay for committing maximum total supply changes.
    /// @return uint256 The delay in seconds.
    function maximalTotalSupplyDelay() external view returns (uint256);

    /// @notice Returns the address of the ratios oracle.
    /// @return address The address of the ratios oracle.
    function ratiosOracle() external view returns (address);

    /// @notice Returns the address of the price oracle.
    /// @return address The address of the price oracle.
    function priceOracle() external view returns (address);

    /// @notice Returns the address of the validator.
    /// @return address The address of the validator.
    function validator() external view returns (address);

    /// @notice Returns the delay for committing validator changes.
    /// @return uint256 The delay in seconds.
    function validatorDelay() external view returns (uint256);

    /// @notice Returns the delay for committing price oracle changes.
    /// @return uint256 The delay in seconds.
    function priceOracleDelay() external view returns (uint256);

    /// @notice Returns the delay for committing ratios oracle changes.
    /// @return uint256 The delay in seconds.
    function ratiosOracleDelay() external view returns (uint256);

    /// @notice Returns the delay required between calling `registerWithdrawal` and being able to perform an emergency withdrawal for that request.
    /// @return uint256 The minimum delay time, in seconds, that a user must wait after calling `registerWithdrawal` before executing an emergency withdrawal.
    function emergencyWithdrawalDelay() external view returns (uint256);

    /// @notice Stages the deposits lock by setting a staged value and timestamp.
    function stageDepositsLock() external;

    /// @notice Commits the previously staged deposits lock after the delay period.
    function commitDepositsLock() external;

    /// @notice Rolls back any staged deposits lock.
    function rollbackStagedDepositsLock() external;

    /// @notice Revokes the current deposits lock, unlocking deposits.
    function revokeDepositsLock() external;

    /// @notice Stages the transfers lock by setting a staged value and timestamp.
    /// @param flag The new value to stage.
    function stageTransfersLock(bool flag) external;

    /// @notice Commits the previously staged transfers lock after the delay period.
    function commitTransfersLock() external;

    /// @notice Rolls back any staged transfers lock.
    function rollbackStagedTransfersLock() external;

    /// @notice Stages the maximum total supply with a staged value and timestamp.
    /// @param maximalTotalSupply_ The maximum total supply to stage.
    function stageMaximalTotalSupply(uint256 maximalTotalSupply_) external;

    /// @notice Commits the previously staged maximum total supply after the delay period.
    function commitMaximalTotalSupply() external;

    /// @notice Rolls back any staged maximum total supply changes.
    function rollbackStagedMaximalTotalSupply() external;

    /// @notice Stages a new deposit callback address.
    /// @param callback The address of the new deposit callback contract.
    function stageDepositCallback(address callback) external;

    /// @notice Commits the previously staged deposit callback address after the delay period.
    function commitDepositCallback() external;

    /// @notice Rolls back any staged deposit callback changes.
    function rollbackStagedDepositCallback() external;

    /// @notice Stages a new withdrawal callback address.
    /// @param callback The address of the new withdrawal callback contract.
    function stageWithdrawalCallback(address callback) external;

    /// @notice Commits the previously staged withdrawal callback address after the delay period.
    function commitWithdrawalCallback() external;

    /// @notice Rolls back any staged withdrawal callback changes.
    function rollbackStagedWithdrawalCallback() external;

    /// @notice Stages a new withdrawal fee in D9 format.
    /// @param feeD9 The new withdrawal fee in D9 format.
    function stageWithdrawalFeeD9(uint256 feeD9) external;

    /// @notice Commits the previously staged withdrawal fee after the delay period.
    function commitWithdrawalFeeD9() external;

    /// @notice Rolls back any staged withdrawal fee changes.
    function rollbackStagedWithdrawalFeeD9() external;

    /// @notice Stages a base delay value.
    /// @param delay_ The base delay value to stage.
    function stageBaseDelay(uint256 delay_) external;

    /// @notice Commits the previously staged base delay after the delay period.
    function commitBaseDelay() external;

    /// @notice Rolls back any staged base delay changes.
    function rollbackStagedBaseDelay() external;

    /// @notice Stages a delay value for the deposit callback.
    /// @param delay_ The delay value to stage.
    function stageDepositCallbackDelay(uint256 delay_) external;

    /// @notice Commits the previously staged deposit callback delay after the delay period.
    function commitDepositCallbackDelay() external;

    /// @notice Rolls back any staged deposit callback delay changes.
    function rollbackStagedDepositCallbackDelay() external;

    /// @notice Stages a delay value for the withdrawal callback.
    /// @param delay_ The delay value to stage.
    function stageWithdrawalCallbackDelay(uint256 delay_) external;

    /// @notice Commits the previously staged withdrawal callback delay after the delay period.
    function commitWithdrawalCallbackDelay() external;

    /// @notice Rolls back any staged withdrawal callback delay changes.
    function rollbackStagedWithdrawalCallbackDelay() external;

    /// @notice Stages a delay value for the withdrawal fee in D9 format.
    /// @param delay_ The delay value to stage.
    function stageWithdrawalFeeD9Delay(uint256 delay_) external;

    /// @notice Commits the previously staged withdrawal fee delay after the delay period.
    function commitWithdrawalFeeD9Delay() external;

    /// @notice Rolls back any staged withdrawal fee delay changes.
    function rollbackStagedWithdrawalFeeD9Delay() external;

    /// @notice Stages a delay value for locking deposits.
    /// @param delay_ The delay value to stage.
    function stageDepositsLockedDelay(uint256 delay_) external;

    /// @notice Commits the previously staged deposits lock delay after the delay period.
    function commitDepositsLockedDelay() external;

    /// @notice Rolls back any staged deposits lock delay changes.
    function rollbackStagedDepositsLockedDelay() external;

    /// @notice Stages a delay value for locking transfers.
    /// @param delay_ The delay value to stage.
    function stageTransfersLockedDelay(uint256 delay_) external;

    /// @notice Commits the previously staged transfers lock delay after the delay period.
    function commitTransfersLockedDelay() external;

    /// @notice Rolls back any staged transfers lock delay changes.
    function rollbackStagedTransfersLockedDelay() external;

    /// @notice Stages a delay value for the delegate module approval.
    /// @param delay_ The delay value to stage.
    function stageDelegateModuleApprovalDelay(uint256 delay_) external;

    /// @notice Commits the previously staged delegate module approval delay after the delay period.
    function commitDelegateModuleApprovalDelay() external;

    /// @notice Rolls back any staged delegate module approval delay changes.
    function rollbackStagedDelegateModuleApprovalDelay() external;

    /// @notice Stages a delay value for the maximum total supply.
    /// @param delay_ The delay value to stage.
    function stageMaximalTotalSupplyDelay(uint256 delay_) external;

    /// @notice Commits the previously staged maximum total supply delay after the delay period.
    function commitMaximalTotalSupplyDelay() external;

    /// @notice Rolls back any staged maximum total supply delay changes.
    function rollbackStagedMaximalTotalSupplyDelay() external;

    /// @notice Stages a ratios oracle address.
    /// @param oracle The address of the new ratios oracle.
    function stageRatiosOracle(address oracle) external;

    /// @notice Commits the previously staged ratios oracle after the delay period.
    function commitRatiosOracle() external;

    /// @notice Rolls back any staged ratios oracle changes.
    function rollbackStagedRatiosOracle() external;

    /// @notice Stages a price oracle address.
    /// @param oracle The address of the new price oracle.
    function stagePriceOracle(address oracle) external;

    /// @notice Commits the previously staged price oracle after the delay period.
    function commitPriceOracle() external;

    /// @notice Rolls back any staged price oracle changes.
    function rollbackStagedPriceOracle() external;

    /// @notice Stages a validator address.
    /// @param validator_ The address of the new validator.
    function stageValidator(address validator_) external;

    /// @notice Commits the previously staged validator after the delay period.
    function commitValidator() external;

    /// @notice Rolls back any staged validator changes.
    function rollbackStagedValidator() external;

    /// @notice Stages a delay value for the validator.
    /// @param delay_ The delay value to stage.
    function stageValidatorDelay(uint256 delay_) external;

    /// @notice Commits the previously staged validator delay after the delay period.
    function commitValidatorDelay() external;

    /// @notice Rolls back any staged validator delay changes.
    function rollbackStagedValidatorDelay() external;

    /// @notice Stages a delay value for the price oracle.
    /// @param delay_ The delay value to stage.
    function stagePriceOracleDelay(uint256 delay_) external;

    /// @notice Commits the previously staged price oracle delay after the delay period.
    function commitPriceOracleDelay() external;

    /// @notice Rolls back any staged price oracle delay changes.
    function rollbackStagedPriceOracleDelay() external;

    /// @notice Stages a delay value for the ratios oracle.
    /// @param delay_ The delay value to stage.
    function stageRatiosOracleDelay(uint256 delay_) external;

    /// @notice Commits the previously staged ratios oracle delay after the delay period.
    function commitRatiosOracleDelay() external;

    /// @notice Rolls back any staged ratios oracle delay changes.
    function rollbackStagedRatiosOracleDelay() external;

    /// @notice Stages a delay value for emergency withdrawals.
    /// @param delay_ The delay value to stage.
    function stageEmergencyWithdrawalDelay(uint256 delay_) external;

    /// @notice Commits the previously staged emergency withdrawal delay.
    function commitEmergencyWithdrawalDelay() external;

    /// @notice Rolls back any staged emergency withdrawal delay changes.
    function rollbackStagedEmergencyWithdrawalDelay() external;

    /// @dev Emitted when a value is staged for future commitment for given slot.
    event Stage(
        bytes32 indexed slot,
        Data indexed data,
        uint256 value,
        uint256 timestamp
    );

    /// @dev Emitted when a staged value is committed and updated for given slot.
    event Commit(bytes32 indexed slot, Data indexed data, uint256 timestamp);

    /// @dev Emitted when a staged value is rolled back without commitment for given slot.
    event Rollback(bytes32 indexed slot, Data indexed data, uint256 timestamp);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;

/**
 * @dev Standard ERC20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/StorageSlot.sol)
// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.

pragma solidity ^0.8.20;

/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```solidity
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(newImplementation.code.length > 0);
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }

    struct BooleanSlot {
        bool value;
    }

    struct Bytes32Slot {
        bytes32 value;
    }

    struct Uint256Slot {
        uint256 value;
    }

    struct StringSlot {
        string value;
    }

    struct BytesSlot {
        bytes value;
    }

    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` with member `value` located at `slot`.
     */
    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.
     */
    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` with member `value` located at `slot`.
     */
    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
     */
    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();

    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }

        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}

{
  "remappings": [
    "ds-test/=lib/forge-std/lib/ds-test/src/",
    "forge-std/=lib/forge-std/src/",
    "@openzeppelin/contracts/=lib/openzeppelin-contracts/contracts/",
    "erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200,
    "details": {
      "yul": true,
      "yulDetails": {
        "stackAllocation": true
      }
    }
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "paris",
  "viaIR": false,
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"contract IVault","name":"vault_","type":"address"},{"internalType":"address","name":"weth_","type":"address"},{"internalType":"address","name":"steth_","type":"address"},{"internalType":"address","name":"wsteth_","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"AddressEmptyCode","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"AddressInsufficientBalance","type":"error"},{"inputs":[],"name":"AddressZero","type":"error"},{"inputs":[],"name":"FailedInnerCall","type":"error"},{"inputs":[],"name":"InvalidAmount","type":"error"},{"inputs":[],"name":"InvalidSender","type":"error"},{"inputs":[],"name":"InvalidToken","type":"error"},{"inputs":[],"name":"InvalidTokenList","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"SafeERC20FailedOperation","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"sender","type":"address"},{"indexed":false,"internalType":"address","name":"token","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"lpAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"deadline","type":"uint256"}],"name":"DepositWrapperDeposit","type":"event"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"address","name":"token","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"minLpAmount","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"}],"name":"deposit","outputs":[{"internalType":"uint256","name":"lpAmount","type":"uint256"}],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"steth","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"vault","outputs":[{"internalType":"contract IVault","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"weth","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"wsteth","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"stateMutability":"payable","type":"receive"}]

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