Overview
ETH Balance
0 ETH
Eth Value
$0.00More Info
Private Name Tags
ContractCreator
TokenTracker
View more zero value Internal Transactions in Advanced View mode
Advanced mode:
Loading...
Loading
Contract Name:
AlgaeToken
Compiler Version
v0.7.0+commit.9e61f92b
Contract Source Code (Solidity)
/** *Submitted for verification at Etherscan.io on 2021-11-26 */ /** *Submitted for verification at Etherscan.io on 2021-11-20 */ // SPDX-License-Identifier: MIT pragma solidity 0.7.0; /** * @dev Wrappers over Solidity's arithmetic operations with added overflow * checks. * * Arithmetic operations in Solidity wrap on overflow. This can easily result * in bugs, because programmers usually assume that an overflow raises an * error, which is the standard behavior in high level programming languages. * `SafeMath` restores this intuition by reverting the transaction when an * operation overflows. * * Using this library instead of the unchecked operations eliminates an entire * class of bugs, so it's recommended to use it always. */ library SafeMath { /** * @dev Returns the addition of two unsigned integers, with an overflow flag. * * _Available since v3.4._ */ function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) { uint256 c = a + b; if (c < a) return (false, 0); return (true, c); } /** * @dev Returns the substraction of two unsigned integers, with an overflow flag. * * _Available since v3.4._ */ function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) { if (b > a) return (false, 0); return (true, a - b); } /** * @dev Returns the multiplication of two unsigned integers, with an overflow flag. * * _Available since v3.4._ */ function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) { // Gas optimization: this is cheaper than requiring 'a' not being zero, but the // benefit is lost if 'b' is also tested. // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522 if (a == 0) return (true, 0); uint256 c = a * b; if (c / a != b) return (false, 0); return (true, c); } /** * @dev Returns the division of two unsigned integers, with a division by zero flag. * * _Available since v3.4._ */ function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) { if (b == 0) return (false, 0); return (true, a / b); } /** * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag. * * _Available since v3.4._ */ function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) { if (b == 0) return (false, 0); return (true, a % b); } /** * @dev Returns the addition of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `+` operator. * * Requirements: * * - Addition cannot overflow. */ function add(uint256 a, uint256 b) internal pure returns (uint256) { uint256 c = a + b; require(c >= a, "SafeMath: addition overflow"); return c; } /** * @dev Returns the subtraction of two unsigned integers, reverting on * overflow (when the result is negative). * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub(uint256 a, uint256 b) internal pure returns (uint256) { require(b <= a, "SafeMath: subtraction overflow"); return a - b; } /** * @dev Returns the multiplication of two unsigned integers, reverting on * overflow. * * Counterpart to Solidity's `*` operator. * * Requirements: * * - Multiplication cannot overflow. */ function mul(uint256 a, uint256 b) internal pure returns (uint256) { if (a == 0) return 0; uint256 c = a * b; require(c / a == b, "SafeMath: multiplication overflow"); return c; } /** * @dev Returns the integer division of two unsigned integers, reverting on * division by zero. The result is rounded towards zero. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div(uint256 a, uint256 b) internal pure returns (uint256) { require(b > 0, "SafeMath: division by zero"); return a / b; } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * reverting when dividing by zero. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod(uint256 a, uint256 b) internal pure returns (uint256) { require(b > 0, "SafeMath: modulo by zero"); return a % b; } /** * @dev Returns the subtraction of two unsigned integers, reverting with custom message on * overflow (when the result is negative). * * CAUTION: This function is deprecated because it requires allocating memory for the error * message unnecessarily. For custom revert reasons use {trySub}. * * Counterpart to Solidity's `-` operator. * * Requirements: * * - Subtraction cannot overflow. */ function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) { require(b <= a, errorMessage); return a - b; } /** * @dev Returns the integer division of two unsigned integers, reverting with custom message on * division by zero. The result is rounded towards zero. * * CAUTION: This function is deprecated because it requires allocating memory for the error * message unnecessarily. For custom revert reasons use {tryDiv}. * * Counterpart to Solidity's `/` operator. Note: this function uses a * `revert` opcode (which leaves remaining gas untouched) while Solidity * uses an invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) { require(b > 0, errorMessage); return a / b; } /** * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo), * reverting with custom message when dividing by zero. * * CAUTION: This function is deprecated because it requires allocating memory for the error * message unnecessarily. For custom revert reasons use {tryMod}. * * Counterpart to Solidity's `%` operator. This function uses a `revert` * opcode (which leaves remaining gas untouched) while Solidity uses an * invalid opcode to revert (consuming all remaining gas). * * Requirements: * * - The divisor cannot be zero. */ function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) { require(b > 0, errorMessage); return a % b; } } // File @openzeppelin/contracts/utils/[email protected] /* * @dev Provides information about the current execution context, including the * sender of the transaction and its data. While these are generally available * via msg.sender and msg.data, they should not be accessed in such a direct * manner, since when dealing with GSN meta-transactions the account sending and * paying for execution may not be the actual sender (as far as an application * is concerned). * * This contract is only required for intermediate, library-like contracts. */ abstract contract Context { function _msgSender() internal view virtual returns (address payable) { return msg.sender; } function _msgData() internal view virtual returns (bytes memory) { this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691 return msg.data; } } // File @openzeppelin/contracts/introspection/[email protected] /** * @dev Interface of the ERC165 standard, as defined in the * https://eips.ethereum.org/EIPS/eip-165[EIP]. * * Implementers can declare support of contract interfaces, which can then be * queried by others ({ERC165Checker}). * * For an implementation, see {ERC165}. */ interface IERC165 { /** * @dev Returns true if this contract implements the interface defined by * `interfaceId`. See the corresponding * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section] * to learn more about how these ids are created. * * This function call must use less than 30 000 gas. */ function supportsInterface(bytes4 interfaceId) external view returns (bool); } // File @openzeppelin/contracts/token/ERC721/[email protected] /** * @dev Required interface of an ERC721 compliant contract. */ interface IERC721 is IERC165 { /** * @dev Emitted when `tokenId` token is transferred from `from` to `to`. */ event Transfer(address indexed from, address indexed to, uint256 indexed tokenId); /** * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token. */ event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId); /** * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets. */ event ApprovalForAll(address indexed owner, address indexed operator, bool approved); /** * @dev Returns the number of tokens in ``owner``'s account. */ function balanceOf(address owner) external view returns (uint256 balance); /** * @dev Returns the owner of the `tokenId` token. * * Requirements: * * - `tokenId` must exist. */ function ownerOf(uint256 tokenId) external view returns (address owner); /** * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients * are aware of the ERC721 protocol to prevent tokens from being forever locked. * * Requirements: * * - `from` cannot be the zero address. * - `to` cannot be the zero address. * - `tokenId` token must exist and be owned by `from`. * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}. * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer. * * Emits a {Transfer} event. */ function safeTransferFrom(address from, address to, uint256 tokenId) external; /** * @dev Transfers `tokenId` token from `from` to `to`. * * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible. * * Requirements: * * - `from` cannot be the zero address. * - `to` cannot be the zero address. * - `tokenId` token must be owned by `from`. * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}. * * Emits a {Transfer} event. */ function transferFrom(address from, address to, uint256 tokenId) external; /** * @dev Gives permission to `to` to transfer `tokenId` token to another account. * The approval is cleared when the token is transferred. * * Only a single account can be approved at a time, so approving the zero address clears previous approvals. * * Requirements: * * - The caller must own the token or be an approved operator. * - `tokenId` must exist. * * Emits an {Approval} event. */ function approve(address to, uint256 tokenId) external; /** * @dev Returns the account approved for `tokenId` token. * * Requirements: * * - `tokenId` must exist. */ function getApproved(uint256 tokenId) external view returns (address operator); /** * @dev Approve or remove `operator` as an operator for the caller. * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller. * * Requirements: * * - The `operator` cannot be the caller. * * Emits an {ApprovalForAll} event. */ function setApprovalForAll(address operator, bool _approved) external; /** * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`. * * See {setApprovalForAll} */ function isApprovedForAll(address owner, address operator) external view returns (bool); /** * @dev Safely transfers `tokenId` token from `from` to `to`. * * Requirements: * * - `from` cannot be the zero address. * - `to` cannot be the zero address. * - `tokenId` token must exist and be owned by `from`. * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}. * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer. * * Emits a {Transfer} event. */ function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external; } // File @openzeppelin/contracts/token/ERC721/[email protected] /** * @title ERC-721 Non-Fungible Token Standard, optional metadata extension * @dev See https://eips.ethereum.org/EIPS/eip-721 */ interface IERC721Metadata is IERC721 { /** * @dev Returns the token collection name. */ function name() external view returns (string memory); /** * @dev Returns the token collection symbol. */ function symbol() external view returns (string memory); /** * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token. */ function tokenURI(uint256 tokenId) external view returns (string memory); } // File @openzeppelin/contracts/token/ERC721/[email protected] /** * @title ERC-721 Non-Fungible Token Standard, optional enumeration extension * @dev See https://eips.ethereum.org/EIPS/eip-721 */ interface IERC721Enumerable is IERC721 { /** * @dev Returns the total amount of tokens stored by the contract. */ function totalSupply() external view returns (uint256); /** * @dev Returns a token ID owned by `owner` at a given `index` of its token list. * Use along with {balanceOf} to enumerate all of ``owner``'s tokens. */ function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId); /** * @dev Returns a token ID at a given `index` of all the tokens stored by the contract. * Use along with {totalSupply} to enumerate all tokens. */ function tokenByIndex(uint256 index) external view returns (uint256); } // File @openzeppelin/contracts/token/ERC721/[email protected] /** * @title ERC721 token receiver interface * @dev Interface for any contract that wants to support safeTransfers * from ERC721 asset contracts. */ interface IERC721Receiver { /** * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom} * by `operator` from `from`, this function is called. * * It must return its Solidity selector to confirm the token transfer. * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted. * * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`. */ function onERC721Received(address operator, address from, uint256 tokenId, bytes calldata data) external returns (bytes4); } // File @openzeppelin/contracts/introspection/[email protected] /** * @dev Implementation of the {IERC165} interface. * * Contracts may inherit from this and call {_registerInterface} to declare * their support of an interface. */ abstract contract ERC165 is IERC165 { /* * bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7 */ bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7; /** * @dev Mapping of interface ids to whether or not it's supported. */ mapping(bytes4 => bool) private _supportedInterfaces; constructor () internal { // Derived contracts need only register support for their own interfaces, // we register support for ERC165 itself here _registerInterface(_INTERFACE_ID_ERC165); } /** * @dev See {IERC165-supportsInterface}. * * Time complexity O(1), guaranteed to always use less than 30 000 gas. */ function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) { return _supportedInterfaces[interfaceId]; } /** * @dev Registers the contract as an implementer of the interface defined by * `interfaceId`. Support of the actual ERC165 interface is automatic and * registering its interface id is not required. * * See {IERC165-supportsInterface}. * * Requirements: * * - `interfaceId` cannot be the ERC165 invalid interface (`0xffffffff`). */ function _registerInterface(bytes4 interfaceId) internal virtual { require(interfaceId != 0xffffffff, "ERC165: invalid interface id"); _supportedInterfaces[interfaceId] = true; } } // File @openzeppelin/contracts/utils/[email protected] /** * @dev Collection of functions related to the address type */ library Address { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * ==== * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * ==== */ function isContract(address account) internal view returns (bool) { // This method relies on extcodesize, which returns 0 for contracts in // construction, since the code is only stored at the end of the // constructor execution. uint256 size; // solhint-disable-next-line no-inline-assembly assembly {size := extcodesize(account)} return size > 0; } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require(address(this).balance >= amount, "Address: insufficient balance"); // solhint-disable-next-line avoid-low-level-calls, avoid-call-value (bool success,) = recipient.call{value : amount}(""); require(success, "Address: unable to send value, recipient may have reverted"); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain`call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCall(target, data, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) { return functionCallWithValue(target, data, value, "Address: low-level call with value failed"); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) { require(address(this).balance >= value, "Address: insufficient balance for call"); require(isContract(target), "Address: call to non-contract"); // solhint-disable-next-line avoid-low-level-calls (bool success, bytes memory returndata) = target.call{value : value}(data); return _verifyCallResult(success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) { return functionStaticCall(target, data, "Address: low-level static call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) { require(isContract(target), "Address: static call to non-contract"); // solhint-disable-next-line avoid-low-level-calls (bool success, bytes memory returndata) = target.staticcall(data); return _verifyCallResult(success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a delegate call. * * _Available since v3.4._ */ function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) { return functionDelegateCall(target, data, "Address: low-level delegate call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a delegate call. * * _Available since v3.4._ */ function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) { require(isContract(target), "Address: delegate call to non-contract"); // solhint-disable-next-line avoid-low-level-calls (bool success, bytes memory returndata) = target.delegatecall(data); return _verifyCallResult(success, returndata, errorMessage); } function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns (bytes memory) { if (success) { return returndata; } else { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly // solhint-disable-next-line no-inline-assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } } } } // File @openzeppelin/contracts/utils/[email protected] /** * @dev Library for managing * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive * types. * * Sets have the following properties: * * - Elements are added, removed, and checked for existence in constant time * (O(1)). * - Elements are enumerated in O(n). No guarantees are made on the ordering. * * ``` * contract Example { * // Add the library methods * using EnumerableSet for EnumerableSet.AddressSet; * * // Declare a set state variable * EnumerableSet.AddressSet private mySet; * } * ``` * * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`) * and `uint256` (`UintSet`) are supported. */ library EnumerableSet { // To implement this library for multiple types with as little code // repetition as possible, we write it in terms of a generic Set type with // bytes32 values. // The Set implementation uses private functions, and user-facing // implementations (such as AddressSet) are just wrappers around the // underlying Set. // This means that we can only create new EnumerableSets for types that fit // in bytes32. struct Set { // Storage of set values bytes32[] _values; // Position of the value in the `values` array, plus 1 because index 0 // means a value is not in the set. mapping(bytes32 => uint256) _indexes; } /** * @dev Add a value to a set. O(1). * * Returns true if the value was added to the set, that is if it was not * already present. */ function _add(Set storage set, bytes32 value) private returns (bool) { if (!_contains(set, value)) { set._values.push(value); // The value is stored at length-1, but we add 1 to all indexes // and use 0 as a sentinel value set._indexes[value] = set._values.length; return true; } else { return false; } } /** * @dev Removes a value from a set. O(1). * * Returns true if the value was removed from the set, that is if it was * present. */ function _remove(Set storage set, bytes32 value) private returns (bool) { // We read and store the value's index to prevent multiple reads from the same storage slot uint256 valueIndex = set._indexes[value]; if (valueIndex != 0) {// Equivalent to contains(set, value) // To delete an element from the _values array in O(1), we swap the element to delete with the last one in // the array, and then remove the last element (sometimes called as 'swap and pop'). // This modifies the order of the array, as noted in {at}. uint256 toDeleteIndex = valueIndex - 1; uint256 lastIndex = set._values.length - 1; // When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs // so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement. bytes32 lastvalue = set._values[lastIndex]; // Move the last value to the index where the value to delete is set._values[toDeleteIndex] = lastvalue; // Update the index for the moved value set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based // Delete the slot where the moved value was stored set._values.pop(); // Delete the index for the deleted slot delete set._indexes[value]; return true; } else { return false; } } /** * @dev Returns true if the value is in the set. O(1). */ function _contains(Set storage set, bytes32 value) private view returns (bool) { return set._indexes[value] != 0; } /** * @dev Returns the number of values on the set. O(1). */ function _length(Set storage set) private view returns (uint256) { return set._values.length; } /** * @dev Returns the value stored at position `index` in the set. O(1). * * Note that there are no guarantees on the ordering of values inside the * array, and it may change when more values are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function _at(Set storage set, uint256 index) private view returns (bytes32) { require(set._values.length > index, "EnumerableSet: index out of bounds"); return set._values[index]; } // Bytes32Set struct Bytes32Set { Set _inner; } /** * @dev Add a value to a set. O(1). * * Returns true if the value was added to the set, that is if it was not * already present. */ function add(Bytes32Set storage set, bytes32 value) internal returns (bool) { return _add(set._inner, value); } /** * @dev Removes a value from a set. O(1). * * Returns true if the value was removed from the set, that is if it was * present. */ function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) { return _remove(set._inner, value); } /** * @dev Returns true if the value is in the set. O(1). */ function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) { return _contains(set._inner, value); } /** * @dev Returns the number of values in the set. O(1). */ function length(Bytes32Set storage set) internal view returns (uint256) { return _length(set._inner); } /** * @dev Returns the value stored at position `index` in the set. O(1). * * Note that there are no guarantees on the ordering of values inside the * array, and it may change when more values are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) { return _at(set._inner, index); } // AddressSet struct AddressSet { Set _inner; } /** * @dev Add a value to a set. O(1). * * Returns true if the value was added to the set, that is if it was not * already present. */ function add(AddressSet storage set, address value) internal returns (bool) { return _add(set._inner, bytes32(uint256(uint160(value)))); } /** * @dev Removes a value from a set. O(1). * * Returns true if the value was removed from the set, that is if it was * present. */ function remove(AddressSet storage set, address value) internal returns (bool) { return _remove(set._inner, bytes32(uint256(uint160(value)))); } /** * @dev Returns true if the value is in the set. O(1). */ function contains(AddressSet storage set, address value) internal view returns (bool) { return _contains(set._inner, bytes32(uint256(uint160(value)))); } /** * @dev Returns the number of values in the set. O(1). */ function length(AddressSet storage set) internal view returns (uint256) { return _length(set._inner); } /** * @dev Returns the value stored at position `index` in the set. O(1). * * Note that there are no guarantees on the ordering of values inside the * array, and it may change when more values are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function at(AddressSet storage set, uint256 index) internal view returns (address) { return address(uint160(uint256(_at(set._inner, index)))); } // UintSet struct UintSet { Set _inner; } /** * @dev Add a value to a set. O(1). * * Returns true if the value was added to the set, that is if it was not * already present. */ function add(UintSet storage set, uint256 value) internal returns (bool) { return _add(set._inner, bytes32(value)); } /** * @dev Removes a value from a set. O(1). * * Returns true if the value was removed from the set, that is if it was * present. */ function remove(UintSet storage set, uint256 value) internal returns (bool) { return _remove(set._inner, bytes32(value)); } /** * @dev Returns true if the value is in the set. O(1). */ function contains(UintSet storage set, uint256 value) internal view returns (bool) { return _contains(set._inner, bytes32(value)); } /** * @dev Returns the number of values on the set. O(1). */ function length(UintSet storage set) internal view returns (uint256) { return _length(set._inner); } /** * @dev Returns the value stored at position `index` in the set. O(1). * * Note that there are no guarantees on the ordering of values inside the * array, and it may change when more values are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function at(UintSet storage set, uint256 index) internal view returns (uint256) { return uint256(_at(set._inner, index)); } } // File @openzeppelin/contracts/utils/[email protected] /** * @dev Library for managing an enumerable variant of Solidity's * https://solidity.readthedocs.io/en/latest/types.html#mapping-types[`mapping`] * type. * * Maps have the following properties: * * - Entries are added, removed, and checked for existence in constant time * (O(1)). * - Entries are enumerated in O(n). No guarantees are made on the ordering. * * ``` * contract Example { * // Add the library methods * using EnumerableMap for EnumerableMap.UintToAddressMap; * * // Declare a set state variable * EnumerableMap.UintToAddressMap private myMap; * } * ``` * * As of v3.0.0, only maps of type `uint256 -> address` (`UintToAddressMap`) are * supported. */ library EnumerableMap { // To implement this library for multiple types with as little code // repetition as possible, we write it in terms of a generic Map type with // bytes32 keys and values. // The Map implementation uses private functions, and user-facing // implementations (such as Uint256ToAddressMap) are just wrappers around // the underlying Map. // This means that we can only create new EnumerableMaps for types that fit // in bytes32. struct MapEntry { bytes32 _key; bytes32 _value; } struct Map { // Storage of map keys and values MapEntry[] _entries; // Position of the entry defined by a key in the `entries` array, plus 1 // because index 0 means a key is not in the map. mapping(bytes32 => uint256) _indexes; } /** * @dev Adds a key-value pair to a map, or updates the value for an existing * key. O(1). * * Returns true if the key was added to the map, that is if it was not * already present. */ function _set(Map storage map, bytes32 key, bytes32 value) private returns (bool) { // We read and store the key's index to prevent multiple reads from the same storage slot uint256 keyIndex = map._indexes[key]; if (keyIndex == 0) {// Equivalent to !contains(map, key) map._entries.push(MapEntry({_key : key, _value : value})); // The entry is stored at length-1, but we add 1 to all indexes // and use 0 as a sentinel value map._indexes[key] = map._entries.length; return true; } else { map._entries[keyIndex - 1]._value = value; return false; } } /** * @dev Removes a key-value pair from a map. O(1). * * Returns true if the key was removed from the map, that is if it was present. */ function _remove(Map storage map, bytes32 key) private returns (bool) { // We read and store the key's index to prevent multiple reads from the same storage slot uint256 keyIndex = map._indexes[key]; if (keyIndex != 0) {// Equivalent to contains(map, key) // To delete a key-value pair from the _entries array in O(1), we swap the entry to delete with the last one // in the array, and then remove the last entry (sometimes called as 'swap and pop'). // This modifies the order of the array, as noted in {at}. uint256 toDeleteIndex = keyIndex - 1; uint256 lastIndex = map._entries.length - 1; // When the entry to delete is the last one, the swap operation is unnecessary. However, since this occurs // so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement. MapEntry storage lastEntry = map._entries[lastIndex]; // Move the last entry to the index where the entry to delete is map._entries[toDeleteIndex] = lastEntry; // Update the index for the moved entry map._indexes[lastEntry._key] = toDeleteIndex + 1; // All indexes are 1-based // Delete the slot where the moved entry was stored map._entries.pop(); // Delete the index for the deleted slot delete map._indexes[key]; return true; } else { return false; } } /** * @dev Returns true if the key is in the map. O(1). */ function _contains(Map storage map, bytes32 key) private view returns (bool) { return map._indexes[key] != 0; } /** * @dev Returns the number of key-value pairs in the map. O(1). */ function _length(Map storage map) private view returns (uint256) { return map._entries.length; } /** * @dev Returns the key-value pair stored at position `index` in the map. O(1). * * Note that there are no guarantees on the ordering of entries inside the * array, and it may change when more entries are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function _at(Map storage map, uint256 index) private view returns (bytes32, bytes32) { require(map._entries.length > index, "EnumerableMap: index out of bounds"); MapEntry storage entry = map._entries[index]; return (entry._key, entry._value); } /** * @dev Tries to returns the value associated with `key`. O(1). * Does not revert if `key` is not in the map. */ function _tryGet(Map storage map, bytes32 key) private view returns (bool, bytes32) { uint256 keyIndex = map._indexes[key]; if (keyIndex == 0) return (false, 0); // Equivalent to contains(map, key) return (true, map._entries[keyIndex - 1]._value); // All indexes are 1-based } /** * @dev Returns the value associated with `key`. O(1). * * Requirements: * * - `key` must be in the map. */ function _get(Map storage map, bytes32 key) private view returns (bytes32) { uint256 keyIndex = map._indexes[key]; require(keyIndex != 0, "EnumerableMap: nonexistent key"); // Equivalent to contains(map, key) return map._entries[keyIndex - 1]._value; // All indexes are 1-based } /** * @dev Same as {_get}, with a custom error message when `key` is not in the map. * * CAUTION: This function is deprecated because it requires allocating memory for the error * message unnecessarily. For custom revert reasons use {_tryGet}. */ function _get(Map storage map, bytes32 key, string memory errorMessage) private view returns (bytes32) { uint256 keyIndex = map._indexes[key]; require(keyIndex != 0, errorMessage); // Equivalent to contains(map, key) return map._entries[keyIndex - 1]._value; // All indexes are 1-based } // UintToAddressMap struct UintToAddressMap { Map _inner; } /** * @dev Adds a key-value pair to a map, or updates the value for an existing * key. O(1). * * Returns true if the key was added to the map, that is if it was not * already present. */ function set(UintToAddressMap storage map, uint256 key, address value) internal returns (bool) { return _set(map._inner, bytes32(key), bytes32(uint256(uint160(value)))); } /** * @dev Removes a value from a set. O(1). * * Returns true if the key was removed from the map, that is if it was present. */ function remove(UintToAddressMap storage map, uint256 key) internal returns (bool) { return _remove(map._inner, bytes32(key)); } /** * @dev Returns true if the key is in the map. O(1). */ function contains(UintToAddressMap storage map, uint256 key) internal view returns (bool) { return _contains(map._inner, bytes32(key)); } /** * @dev Returns the number of elements in the map. O(1). */ function length(UintToAddressMap storage map) internal view returns (uint256) { return _length(map._inner); } /** * @dev Returns the element stored at position `index` in the set. O(1). * Note that there are no guarantees on the ordering of values inside the * array, and it may change when more values are added or removed. * * Requirements: * * - `index` must be strictly less than {length}. */ function at(UintToAddressMap storage map, uint256 index) internal view returns (uint256, address) { (bytes32 key, bytes32 value) = _at(map._inner, index); return (uint256(key), address(uint160(uint256(value)))); } /** * @dev Tries to returns the value associated with `key`. O(1). * Does not revert if `key` is not in the map. * * _Available since v3.4._ */ function tryGet(UintToAddressMap storage map, uint256 key) internal view returns (bool, address) { (bool success, bytes32 value) = _tryGet(map._inner, bytes32(key)); return (success, address(uint160(uint256(value)))); } /** * @dev Returns the value associated with `key`. O(1). * * Requirements: * * - `key` must be in the map. */ function get(UintToAddressMap storage map, uint256 key) internal view returns (address) { return address(uint160(uint256(_get(map._inner, bytes32(key))))); } /** * @dev Same as {get}, with a custom error message when `key` is not in the map. * * CAUTION: This function is deprecated because it requires allocating memory for the error * message unnecessarily. For custom revert reasons use {tryGet}. */ function get(UintToAddressMap storage map, uint256 key, string memory errorMessage) internal view returns (address) { return address(uint160(uint256(_get(map._inner, bytes32(key), errorMessage)))); } } // File @openzeppelin/contracts/utils/[email protected] /** * @dev String operations. */ library Strings { /** * @dev Converts a `uint256` to its ASCII `string` representation. */ function toString(uint256 value) internal pure returns (string memory) { // Inspired by OraclizeAPI's implementation - MIT licence // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol if (value == 0) { return "0"; } uint256 temp = value; uint256 digits; while (temp != 0) { digits++; temp /= 10; } bytes memory buffer = new bytes(digits); uint256 index = digits - 1; temp = value; while (temp != 0) { buffer[index--] = bytes1(uint8(48 + temp % 10)); temp /= 10; } return string(buffer); } } // File @openzeppelin/contracts/token/ERC721/[email protected] /** * @title ERC721 Non-Fungible Token Standard basic implementation * @dev see https://eips.ethereum.org/EIPS/eip-721 */ contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Enumerable { using SafeMath for uint256; using Address for address; using EnumerableSet for EnumerableSet.UintSet; using EnumerableMap for EnumerableMap.UintToAddressMap; using Strings for uint256; // Equals to `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))` // which can be also obtained as `IERC721Receiver(0).onERC721Received.selector` bytes4 private constant _ERC721_RECEIVED = 0x150b7a02; // Mapping from holder address to their (enumerable) set of owned tokens mapping(address => EnumerableSet.UintSet) private _holderTokens; // Enumerable mapping from token ids to their owners EnumerableMap.UintToAddressMap private _tokenOwners; // Mapping from token ID to approved address mapping(uint256 => address) private _tokenApprovals; // Mapping from owner to operator approvals mapping(address => mapping(address => bool)) private _operatorApprovals; // Token name string private _name; // Token symbol string private _symbol; // Optional mapping for token URIs mapping(uint256 => string) private _tokenURIs; // Base URI string private _baseURI; /* * bytes4(keccak256('balanceOf(address)')) == 0x70a08231 * bytes4(keccak256('ownerOf(uint256)')) == 0x6352211e * bytes4(keccak256('approve(address,uint256)')) == 0x095ea7b3 * bytes4(keccak256('getApproved(uint256)')) == 0x081812fc * bytes4(keccak256('setApprovalForAll(address,bool)')) == 0xa22cb465 * bytes4(keccak256('isApprovedForAll(address,address)')) == 0xe985e9c5 * bytes4(keccak256('transferFrom(address,address,uint256)')) == 0x23b872dd * bytes4(keccak256('safeTransferFrom(address,address,uint256)')) == 0x42842e0e * bytes4(keccak256('safeTransferFrom(address,address,uint256,bytes)')) == 0xb88d4fde * * => 0x70a08231 ^ 0x6352211e ^ 0x095ea7b3 ^ 0x081812fc ^ * 0xa22cb465 ^ 0xe985e9c5 ^ 0x23b872dd ^ 0x42842e0e ^ 0xb88d4fde == 0x80ac58cd */ bytes4 private constant _INTERFACE_ID_ERC721 = 0x80ac58cd; /* * bytes4(keccak256('name()')) == 0x06fdde03 * bytes4(keccak256('symbol()')) == 0x95d89b41 * bytes4(keccak256('tokenURI(uint256)')) == 0xc87b56dd * * => 0x06fdde03 ^ 0x95d89b41 ^ 0xc87b56dd == 0x5b5e139f */ bytes4 private constant _INTERFACE_ID_ERC721_METADATA = 0x5b5e139f; /* * bytes4(keccak256('totalSupply()')) == 0x18160ddd * bytes4(keccak256('tokenOfOwnerByIndex(address,uint256)')) == 0x2f745c59 * bytes4(keccak256('tokenByIndex(uint256)')) == 0x4f6ccce7 * * => 0x18160ddd ^ 0x2f745c59 ^ 0x4f6ccce7 == 0x780e9d63 */ bytes4 private constant _INTERFACE_ID_ERC721_ENUMERABLE = 0x780e9d63; /** * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection. */ constructor (string memory name_, string memory symbol_) public { _name = name_; _symbol = symbol_; // register the supported interfaces to conform to ERC721 via ERC165 _registerInterface(_INTERFACE_ID_ERC721); _registerInterface(_INTERFACE_ID_ERC721_METADATA); _registerInterface(_INTERFACE_ID_ERC721_ENUMERABLE); } /** * @dev See {IERC721-balanceOf}. */ function balanceOf(address owner) public view virtual override returns (uint256) { require(owner != address(0), "ERC721: balance query for the zero address"); return _holderTokens[owner].length(); } /** * @dev See {IERC721-ownerOf}. */ function ownerOf(uint256 tokenId) public view virtual override returns (address) { return _tokenOwners.get(tokenId, "ERC721: owner query for nonexistent token"); } /** * @dev See {IERC721Metadata-name}. */ function name() public view virtual override returns (string memory) { return _name; } /** * @dev See {IERC721Metadata-symbol}. */ function symbol() public view virtual override returns (string memory) { return _symbol; } /** * @dev See {IERC721Metadata-tokenURI}. */ function tokenURI(uint256 tokenId) public view virtual override returns (string memory) { require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token"); string memory _tokenURI = _tokenURIs[tokenId]; string memory base = baseURI(); // If there is no base URI, return the token URI. if (bytes(base).length == 0) { return _tokenURI; } // If both are set, concatenate the baseURI and tokenURI (via abi.encodePacked). if (bytes(_tokenURI).length > 0) { return string(abi.encodePacked(base, _tokenURI)); } // If there is a baseURI but no tokenURI, concatenate the tokenID to the baseURI. return string(abi.encodePacked(base, tokenId.toString())); } /** * @dev Returns the base URI set via {_setBaseURI}. This will be * automatically added as a prefix in {tokenURI} to each token's URI, or * to the token ID if no specific URI is set for that token ID. */ function baseURI() public view virtual returns (string memory) { return _baseURI; } /** * @dev See {IERC721Enumerable-tokenOfOwnerByIndex}. */ function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) { return _holderTokens[owner].at(index); } /** * @dev See {IERC721Enumerable-totalSupply}. */ function totalSupply() public view virtual override returns (uint256) { // _tokenOwners are indexed by tokenIds, so .length() returns the number of tokenIds return _tokenOwners.length(); } /** * @dev See {IERC721Enumerable-tokenByIndex}. */ function tokenByIndex(uint256 index) public view virtual override returns (uint256) { (uint256 tokenId,) = _tokenOwners.at(index); return tokenId; } /** * @dev See {IERC721-approve}. */ function approve(address to, uint256 tokenId) public virtual override { address owner = ERC721.ownerOf(tokenId); require(to != owner, "ERC721: approval to current owner"); require(_msgSender() == owner || ERC721.isApprovedForAll(owner, _msgSender()), "ERC721: approve caller is not owner nor approved for all" ); _approve(to, tokenId); } /** * @dev See {IERC721-getApproved}. */ function getApproved(uint256 tokenId) public view virtual override returns (address) { require(_exists(tokenId), "ERC721: approved query for nonexistent token"); return _tokenApprovals[tokenId]; } /** * @dev See {IERC721-setApprovalForAll}. */ function setApprovalForAll(address operator, bool approved) public virtual override { require(operator != _msgSender(), "ERC721: approve to caller"); _operatorApprovals[_msgSender()][operator] = approved; emit ApprovalForAll(_msgSender(), operator, approved); } /** * @dev See {IERC721-isApprovedForAll}. */ function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) { return _operatorApprovals[owner][operator]; } /** * @dev See {IERC721-transferFrom}. */ function transferFrom(address from, address to, uint256 tokenId) public virtual override { //solhint-disable-next-line max-line-length require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved"); _transfer(from, to, tokenId); } /** * @dev See {IERC721-safeTransferFrom}. */ function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override { safeTransferFrom(from, to, tokenId, ""); } /** * @dev See {IERC721-safeTransferFrom}. */ function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public virtual override { require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved"); _safeTransfer(from, to, tokenId, _data); } /** * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients * are aware of the ERC721 protocol to prevent tokens from being forever locked. * * `_data` is additional data, it has no specified format and it is sent in call to `to`. * * This internal function is equivalent to {safeTransferFrom}, and can be used to e.g. * implement alternative mechanisms to perform token transfer, such as signature-based. * * Requirements: * * - `from` cannot be the zero address. * - `to` cannot be the zero address. * - `tokenId` token must exist and be owned by `from`. * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer. * * Emits a {Transfer} event. */ function _safeTransfer(address from, address to, uint256 tokenId, bytes memory _data) internal virtual { _transfer(from, to, tokenId); require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer"); } /** * @dev Returns whether `tokenId` exists. * * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}. * * Tokens start existing when they are minted (`_mint`), * and stop existing when they are burned (`_burn`). */ function _exists(uint256 tokenId) internal view virtual returns (bool) { return _tokenOwners.contains(tokenId); } /** * @dev Returns whether `spender` is allowed to manage `tokenId`. * * Requirements: * * - `tokenId` must exist. */ function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) { require(_exists(tokenId), "ERC721: operator query for nonexistent token"); address owner = ERC721.ownerOf(tokenId); return (spender == owner || getApproved(tokenId) == spender || ERC721.isApprovedForAll(owner, spender)); } /** * @dev Safely mints `tokenId` and transfers it to `to`. * * Requirements: d* * - `tokenId` must not exist. * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer. * * Emits a {Transfer} event. */ function _safeMint(address to, uint256 tokenId) internal virtual { _safeMint(to, tokenId, ""); } /** * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is * forwarded in {IERC721Receiver-onERC721Received} to contract recipients. */ function _safeMint(address to, uint256 tokenId, bytes memory _data) internal virtual { _mint(to, tokenId); require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer"); } /** * @dev Mints `tokenId` and transfers it to `to`. * * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible * * Requirements: * * - `tokenId` must not exist. * - `to` cannot be the zero address. * * Emits a {Transfer} event. */ function _mint(address to, uint256 tokenId) internal virtual { require(to != address(0), "ERC721: mint to the zero address"); require(!_exists(tokenId), "ERC721: token already minted"); _beforeTokenTransfer(address(0), to, tokenId); _holderTokens[to].add(tokenId); _tokenOwners.set(tokenId, to); emit Transfer(address(0), to, tokenId); } /** * @dev Destroys `tokenId`. * The approval is cleared when the token is burned. * * Requirements: * * - `tokenId` must exist. * * Emits a {Transfer} event. */ function _burn(uint256 tokenId) internal virtual { address owner = ERC721.ownerOf(tokenId); // internal owner _beforeTokenTransfer(owner, address(0), tokenId); // Clear approvals _approve(address(0), tokenId); // Clear metadata (if any) if (bytes(_tokenURIs[tokenId]).length != 0) { delete _tokenURIs[tokenId]; } _holderTokens[owner].remove(tokenId); _tokenOwners.remove(tokenId); emit Transfer(owner, address(0), tokenId); } /** * @dev Transfers `tokenId` from `from` to `to`. * As opposed to {transferFrom}, this imposes no restrictions on msg.sender. * * Requirements: * * - `to` cannot be the zero address. * - `tokenId` token must be owned by `from`. * * Emits a {Transfer} event. */ function _transfer(address from, address to, uint256 tokenId) internal virtual { require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own"); // internal owner require(to != address(0), "ERC721: transfer to the zero address"); _beforeTokenTransfer(from, to, tokenId); // Clear approvals from the previous owner _approve(address(0), tokenId); _holderTokens[from].remove(tokenId); _holderTokens[to].add(tokenId); _tokenOwners.set(tokenId, to); emit Transfer(from, to, tokenId); } /** * @dev Sets `_tokenURI` as the tokenURI of `tokenId`. * * Requirements: * * - `tokenId` must exist. */ function _setTokenURI(uint256 tokenId, string memory _tokenURI) internal virtual { require(_exists(tokenId), "ERC721Metadata: URI set of nonexistent token"); _tokenURIs[tokenId] = _tokenURI; } /** * @dev Internal function to set the base URI for all token IDs. It is * automatically added as a prefix to the value returned in {tokenURI}, * or to the token ID if {tokenURI} is empty. */ function _setBaseURI(string memory baseURI_) internal virtual { _baseURI = baseURI_; } /** * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address. * The call is not executed if the target address is not a contract. * * @param from address representing the previous owner of the given token ID * @param to target address that will receive the tokens * @param tokenId uint256 ID of the token to be transferred * @param _data bytes optional data to send along with the call * @return bool whether the call correctly returned the expected magic value */ function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data) private returns (bool) { if (!to.isContract()) { return true; } bytes memory returndata = to.functionCall(abi.encodeWithSelector( IERC721Receiver(to).onERC721Received.selector, _msgSender(), from, tokenId, _data ), "ERC721: transfer to non ERC721Receiver implementer"); bytes4 retval = abi.decode(returndata, (bytes4)); return (retval == _ERC721_RECEIVED); } function _approve(address to, uint256 tokenId) private { _tokenApprovals[tokenId] = to; emit Approval(ERC721.ownerOf(tokenId), to, tokenId); // internal owner } /** * @dev Hook that is called before any token transfer. This includes minting * and burning. * * Calling conditions: * * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be * transferred to `to`. * - When `from` is zero, `tokenId` will be minted for `to`. * - When `to` is zero, ``from``'s `tokenId` will be burned. * - `from` cannot be the zero address. * - `to` cannot be the zero address. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual {} } // File @openzeppelin/contracts/access/[email protected] /** * @dev Contract module which provides a basic access control mechanism, where * there is an account (an owner) that can be granted exclusive access to * specific functions. * * By default, the owner account will be the one that deploys the contract. This * can later be changed with {transferOwnership}. * * This module is used through inheritance. It will make available the modifier * `onlyOwner`, which can be applied to your functions to restrict their use to * the owner. */ abstract contract Ownable is Context { address private _owner; event OwnershipTransferred(address indexed previousOwner, address indexed newOwner); /** * @dev Initializes the contract setting the deployer as the initial owner. */ constructor () internal { address msgSender = _msgSender(); _owner = msgSender; emit OwnershipTransferred(address(0), msgSender); } /** * @dev Returns the address of the current owner. */ function owner() public view virtual returns (address) { return _owner; } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { require(owner() == _msgSender(), "Ownable: caller is not the owner"); _; } /** * @dev Leaves the contract without owner. It will not be possible to call * `onlyOwner` functions anymore. Can only be called by the current owner. * * NOTE: Renouncing ownership will leave the contract without an owner, * thereby removing any functionality that is only available to the owner. */ function renounceOwnership() public virtual onlyOwner { emit OwnershipTransferred(_owner, address(0)); _owner = address(0); } /** * @dev Transfers ownership of the contract to a new account (`newOwner`). * Can only be called by the current owner. */ function transferOwnership(address newOwner) public virtual onlyOwner { require(newOwner != address(0), "Ownable: new owner is the zero address"); emit OwnershipTransferred(_owner, newOwner); _owner = newOwner; } } /** * @dev Interface of the ERC20 standard as defined in the EIP. */ interface IERC20 { /** * @dev Returns the amount of tokens in existence. */ function totalSupply() external view returns (uint256); /** * @dev Returns the amount of tokens owned by `account`. */ function balanceOf(address account) external view returns (uint256); /** * @dev Moves `amount` tokens from the caller's account to `recipient`. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transfer(address recipient, uint256 amount) external returns (bool); /** * @dev Returns the remaining number of tokens that `spender` will be * allowed to spend on behalf of `owner` through {transferFrom}. This is * zero by default. * * This value changes when {approve} or {transferFrom} are called. */ function allowance(address owner, address spender) external view returns (uint256); /** * @dev Sets `amount` as the allowance of `spender` over the caller's tokens. * * Returns a boolean value indicating whether the operation succeeded. * * IMPORTANT: Beware that changing an allowance with this method brings the risk * that someone may use both the old and the new allowance by unfortunate * transaction ordering. One possible solution to mitigate this race * condition is to first reduce the spender's allowance to 0 and set the * desired value afterwards: * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 * * Emits an {Approval} event. */ function approve(address spender, uint256 amount) external returns (bool); /** * @dev Moves `amount` tokens from `sender` to `recipient` using the * allowance mechanism. `amount` is then deducted from the caller's * allowance. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transferFrom(address sender, address recipient, uint256 amount) external returns (bool); /** * @dev Emitted when `value` tokens are moved from one account (`from`) to * another (`to`). * * Note that `value` may be zero. */ event Transfer(address indexed from, address indexed to, uint256 value); /** * @dev Emitted when the allowance of a `spender` for an `owner` is set by * a call to {approve}. `value` is the new allowance. */ event Approval(address indexed owner, address indexed spender, uint256 value); } /** * @dev Implementation of the {IERC20} interface. * * This implementation is agnostic to the way tokens are created. This means * that a supply mechanism has to be added in a derived contract using {_mint}. * For a generic mechanism see {ERC20PresetMinterPauser}. * * TIP: For a detailed writeup see our guide * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How * to implement supply mechanisms]. * * We have followed general OpenZeppelin guidelines: functions revert instead * of returning `false` on failure. This behavior is nonetheless conventional * and does not conflict with the expectations of ERC20 applications. * * Additionally, an {Approval} event is emitted on calls to {transferFrom}. * This allows applications to reconstruct the allowance for all accounts just * by listening to said events. Other implementations of the EIP may not emit * these events, as it isn't required by the specification. * * Finally, the non-standard {decreaseAllowance} and {increaseAllowance} * functions have been added to mitigate the well-known issues around setting * allowances. See {IERC20-approve}. */ contract ERC20 is Context, IERC20 { using SafeMath for uint256; using Address for address; mapping(address => uint256) private _balances; mapping(address => mapping(address => uint256)) private _allowances; uint256 private _totalSupply; string private _name; string private _symbol; uint8 private _decimals; /** * @dev Sets the values for {name} and {symbol}, initializes {decimals} with * a default value of 18. * * To select a different value for {decimals}, use {_setupDecimals}. * * All three of these values are immutable: they can only be set once during * construction. */ constructor (string memory name, string memory symbol) public { _name = name; _symbol = symbol; _decimals = 18; } /** * @dev Returns the name of the token. */ function name() public view returns (string memory) { return _name; } /** * @dev Returns the symbol of the token, usually a shorter version of the * name. */ function symbol() public view returns (string memory) { return _symbol; } /** * @dev Returns the number of decimals used to get its user representation. * For example, if `decimals` equals `2`, a balance of `505` tokens should * be displayed to a user as `5,05` (`505 / 10 ** 2`). * * Tokens usually opt for a value of 18, imitating the relationship between * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is * called. * * NOTE: This information is only used for _display_ purposes: it in * no way affects any of the arithmetic of the contract, including * {IERC20-balanceOf} and {IERC20-transfer}. */ function decimals() public view returns (uint8) { return _decimals; } /** * @dev See {IERC20-totalSupply}. */ function totalSupply() public view override returns (uint256) { return _totalSupply; } /** * @dev See {IERC20-balanceOf}. */ function balanceOf(address account) public view override returns (uint256) { return _balances[account]; } /** * @dev See {IERC20-transfer}. * * Requirements: * * - `recipient` cannot be the zero address. * - the caller must have a balance of at least `amount`. */ function transfer(address recipient, uint256 amount) public virtual override returns (bool) { _transfer(_msgSender(), recipient, amount); return true; } /** * @dev See {IERC20-allowance}. */ function allowance(address owner, address spender) public view virtual override returns (uint256) { return _allowances[owner][spender]; } /** * @dev See {IERC20-approve}. * * Requirements: * * - `spender` cannot be the zero address. */ function approve(address spender, uint256 amount) public virtual override returns (bool) { _approve(_msgSender(), spender, amount); return true; } /** * @dev See {IERC20-transferFrom}. * * Emits an {Approval} event indicating the updated allowance. This is not * required by the EIP. See the note at the beginning of {ERC20}; * * Requirements: * - `sender` and `recipient` cannot be the zero address. * - `sender` must have a balance of at least `amount`. * - the caller must have allowance for ``sender``'s tokens of at least * `amount`. */ function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) { _transfer(sender, recipient, amount); _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance")); return true; } /** * @dev Atomically increases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. */ function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) { _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue)); return true; } /** * @dev Atomically decreases the allowance granted to `spender` by the caller. * * This is an alternative to {approve} that can be used as a mitigation for * problems described in {IERC20-approve}. * * Emits an {Approval} event indicating the updated allowance. * * Requirements: * * - `spender` cannot be the zero address. * - `spender` must have allowance for the caller of at least * `subtractedValue`. */ function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) { _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero")); return true; } /** * @dev Moves tokens `amount` from `sender` to `recipient`. * * This is internal function is equivalent to {transfer}, and can be used to * e.g. implement automatic token fees, slashing mechanisms, etc. * * Emits a {Transfer} event. * * Requirements: * * - `sender` cannot be the zero address. * - `recipient` cannot be the zero address. * - `sender` must have a balance of at least `amount`. */ function _transfer(address sender, address recipient, uint256 amount) internal virtual { require(sender != address(0), "ERC20: transfer from the zero address"); require(recipient != address(0), "ERC20: transfer to the zero address"); _beforeTokenTransfer(sender, recipient, amount); _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance"); _balances[recipient] = _balances[recipient].add(amount); emit Transfer(sender, recipient, amount); } /** @dev Creates `amount` tokens and assigns them to `account`, increasing * the total supply. * * Emits a {Transfer} event with `from` set to the zero address. * * Requirements * * - `to` cannot be the zero address. */ function _mint(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: mint to the zero address"); _beforeTokenTransfer(address(0), account, amount); _totalSupply = _totalSupply.add(amount); _balances[account] = _balances[account].add(amount); emit Transfer(address(0), account, amount); } /** * @dev Destroys `amount` tokens from `account`, reducing the * total supply. * * Emits a {Transfer} event with `to` set to the zero address. * * Requirements * * - `account` cannot be the zero address. * - `account` must have at least `amount` tokens. */ function _burn(address account, uint256 amount) internal virtual { require(account != address(0), "ERC20: burn from the zero address"); _beforeTokenTransfer(account, address(0), amount); _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance"); _totalSupply = _totalSupply.sub(amount); emit Transfer(account, address(0), amount); } /** * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens. * * This internal function is equivalent to `approve`, and can be used to * e.g. set automatic allowances for certain subsystems, etc. * * Emits an {Approval} event. * * Requirements: * * - `owner` cannot be the zero address. * - `spender` cannot be the zero address. */ function _approve(address owner, address spender, uint256 amount) internal virtual { require(owner != address(0), "ERC20: approve from the zero address"); require(spender != address(0), "ERC20: approve to the zero address"); _allowances[owner][spender] = amount; emit Approval(owner, spender, amount); } /** * @dev Sets {decimals} to a value other than the default one of 18. * * WARNING: This function should only be called from the constructor. Most * applications that interact with token contracts will not expect * {decimals} to ever change, and may work incorrectly if it does. */ function _setupDecimals(uint8 decimals_) internal { _decimals = decimals_; } /** * @dev Hook that is called before any transfer of tokens. This includes * minting and burning. * * Calling conditions: * * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens * will be to transferred to `to`. * - when `from` is zero, `amount` tokens will be minted for `to`. * - when `to` is zero, `amount` of ``from``'s tokens will be burned. * - `from` and `to` are never both zero. * * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks]. */ function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {} } interface IAlgae { function sendAlgae(address _to, uint256 _amount) external; } interface IMerchPass { function ownerOf(uint256 tokenId) external view returns (address owner); } interface IManateez { function balanceOf(address owner) external view returns (uint256 balance); function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId); function ownerOf(uint256 tokenId) external view returns (address owner); } contract AlgaeToken is ERC20("AlgaeToken", "ALGAE"), Ownable { using SafeMath for uint256; mapping(address => bool) public canSendAlgae; mapping(address => bool) public canBurnAlgae; function sendAlgae(address _to, uint256 _amount) external { require(canSendAlgae[msg.sender], "Nope!"); _mint(_to, _amount); } function addCanBurn(address _canBurn) external onlyOwner { canBurnAlgae[_canBurn] = true; } function removeCanBurn(address _canBurn) external onlyOwner { canBurnAlgae[_canBurn] = false; } function addCanSendAlgae(address _canBurn) external onlyOwner { canSendAlgae[_canBurn] = true; } function removeCanSendAlgae(address _canBurn) external onlyOwner { canSendAlgae[_canBurn] = false; } function burn(address _from, uint256 _amount) external { require(canBurnAlgae[msg.sender]); _burn(_from, _amount); } constructor() public {} } /** * @title ManateezComic * @dev Extends ERC721 Non-Fungible Token Standard basic implementation */ contract ManateezComic is ERC721, Ownable { using SafeMath for uint256; uint256 public COMIC_PRICE = 0.01 ether; uint256 public RESERVED_FOR_TEAM = 500; uint256 public TEAM_COUNT = 0; uint256 constant OG_TEEZ_PAYMENT = 500000000000000000000; uint256 constant MERCH_PASS_PAYMENT = 100000000000000000000; uint256 constant OG_TEEZ_SUPPLY = 235; uint256 public constant MAX_COMICS = 5000; uint256 constant public BASE_RATE = 5 ether; uint256 constant public INITIAL_ISSUANCE = 100 ether; bool public isLive = true; bool public ogTeezClaiming = true; bool public merchPassClaiming = true; // 12/31/2031 @11:59:59 EST uint256 constant END = 1956545999; mapping(address => uint256) rewards; mapping(address => uint256) lastUpdate; mapping(address => uint256) userBalance; mapping(address => bool) admins; mapping(uint256 => bool) claimedMerchPass; mapping(uint256 => bool) claimedManateez; IAlgae algaetoken; IManateez mightymanateez; IMerchPass merchpass; function mintComics(uint numberOfTokens) external payable { require(isLive, "Can not mint Comics before the sale has started"); require(totalSupply().add(numberOfTokens) <= MAX_COMICS, "Purchase would exceed max supply of Comics"); require(COMIC_PRICE.mul(numberOfTokens) <= msg.value, "Ether value sent is not correct"); updateRewardOnMint(msg.sender, numberOfTokens); userBalance[msg.sender] += numberOfTokens; for (uint i = 0; i < numberOfTokens; i++) { uint mintIndex = totalSupply(); if (totalSupply() < MAX_COMICS) { _safeMint(msg.sender, mintIndex + RESERVED_FOR_TEAM); } } } function getTotalClaimable(address _user) external view returns (uint256) { uint256 time = min(block.timestamp, END); uint256 pending = userBalance[_user].mul(BASE_RATE.mul((time.sub(lastUpdate[_user])))).div(86400); return rewards[_user] + pending; } function updateReward(address _from, address _to) private { uint256 time = min(block.timestamp, END); uint256 timerFrom = lastUpdate[_from]; if (timerFrom > 0) rewards[_from] += userBalance[_from].mul(BASE_RATE.mul((time.sub(timerFrom)))).div(86400); if (timerFrom != END) lastUpdate[_from] = time; if (_to != address(0)) { uint256 timerTo = lastUpdate[_to]; if (timerTo > 0) rewards[_to] += userBalance[_to].mul(BASE_RATE.mul((time.sub(timerTo)))).div(86400); if (timerTo != END) lastUpdate[_to] = time; } } function getReward() external { address _user = msg.sender; updateReward(_user, address(0)); uint256 reward = rewards[_user]; if (rewards[_user] > 0) { rewards[_user] = 0; algaetoken.sendAlgae(_user, reward); } } function transferFrom(address from, address to, uint256 tokenId) public override { updateReward(from, to); userBalance[from]--; userBalance[to]++; ERC721.transferFrom(from, to, tokenId); } function updateRewardOnMint(address _user, uint256 _amount) private { uint256 time = min(block.timestamp, END); uint256 timerUser = lastUpdate[_user]; if (timerUser > 0) rewards[_user] = rewards[_user].add(userBalance[_user].mul(BASE_RATE.mul((time.sub(timerUser)))).div(86400) .add(_amount.mul(INITIAL_ISSUANCE))); else rewards[_user] = rewards[_user].add(_amount.mul(INITIAL_ISSUANCE)); lastUpdate[_user] = time; } function reserveForTeam(uint _amount, address _to) external { require(admins[msg.sender], "You are not admin"); require(TEAM_COUNT.add(_amount) <= RESERVED_FOR_TEAM, "Can not mint more than 500 tokens for the team"); TEAM_COUNT += _amount; updateRewardOnMint(_to, _amount); userBalance[_to] += _amount; for (uint i = 0; i < _amount; i++) { _safeMint(_to, i); } } function min(uint256 a, uint256 b) internal pure returns (uint256) { return a < b ? a : b; } function setBaseURI(string memory baseURI) external { require(admins[msg.sender], "You are not admin"); _setBaseURI(baseURI); } function updateNFTPrice(uint256 _price) external { require(admins[msg.sender], "You are not admin"); COMIC_PRICE = _price; } function goLive() external { require(admins[msg.sender], "You are not admin"); isLive = true; } function stopLive() external { require(admins[msg.sender], "You are not admin"); isLive = false; } function withdraw() public onlyOwner { uint256 balance = address(this).balance; msg.sender.transfer(balance); } function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public override { updateReward(from, to); userBalance[from]--; userBalance[to]++; ERC721.safeTransferFrom(from, to, tokenId, _data); } function claimAlgaeForOGTeez(uint256[] memory tokenIds) external{ require(ogTeezClaiming, "OG Teez claiming is disabled"); address _user = msg.sender; // uint256 ownersSupply = mightymanateez.balanceOf(_user); uint256 amountToReward = 0; for(uint i = 0; i < tokenIds.length; i++){ if(mightymanateez.ownerOf(tokenIds[i]) == _user && !claimedManateez[tokenIds[i]]){ amountToReward++; claimedManateez[tokenIds[i]] = true; } } if(amountToReward > 0){ algaetoken.sendAlgae(_user, OG_TEEZ_PAYMENT.mul(amountToReward)); } } function checkTeezClaimed(uint256 _id) external view returns(bool){ return claimedManateez[_id]; } function claimAlgaeForMerchPass(uint256 _id) external { require(merchPassClaiming, "MerchPass claiming is disabled"); require(merchpass.ownerOf(_id) == msg.sender, "You don't own that MerchPass"); require(!claimedMerchPass[_id], "That MerchPass has already been claimed"); algaetoken.sendAlgae(msg.sender, MERCH_PASS_PAYMENT); claimedMerchPass[_id] = true; } function addAddressAsAdmin(address _newAdmin) external onlyOwner{ admins[_newAdmin] = true; } constructor(address _algae, IManateez _mightyManateez, IMerchPass _merchPass) ERC721("MightyManateez Comic Issue 1", "MMCOMIC") { mightymanateez = IManateez(_mightyManateez); merchpass = IMerchPass(_merchPass); algaetoken = IAlgae(_algae); admins[msg.sender] = true; } }
Contract Security Audit
- No Contract Security Audit Submitted- Submit Audit Here
[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[{"internalType":"address","name":"_canBurn","type":"address"}],"name":"addCanBurn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_canBurn","type":"address"}],"name":"addCanSendAlgae","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_from","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"canBurnAlgae","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"canSendAlgae","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_canBurn","type":"address"}],"name":"removeCanBurn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_canBurn","type":"address"}],"name":"removeCanSendAlgae","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"sendAlgae","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"}]
Contract Creation Code
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
Deployed Bytecode
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
Deployed Bytecode Sourcemap
80604:1009:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;71299:83;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;73405:169;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;73405:169:0;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;80809:149;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;80809:149:0;;;;;;;;:::i;:::-;;81083:109;;;;;;;;;;;;;;;;-1:-1:-1;81083:109:0;-1:-1:-1;;;;;81083:109:0;;:::i;72374:100::-;;;:::i;:::-;;;;;;;;;;;;;;;;74048:321;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;74048:321:0;;;;;;;;;;;;;;;;;:::i;72226:83::-;;;:::i;:::-;;;;;;;;;;;;;;;;;;;74778:218;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;74778:218:0;;;;;;;;:::i;81200:110::-;;;;;;;;;;;;;;;;-1:-1:-1;81200:110:0;-1:-1:-1;;;;;81200:110:0;;:::i;80756:44::-;;;;;;;;;;;;;;;;-1:-1:-1;80756:44:0;-1:-1:-1;;;;;80756:44:0;;:::i;80705:::-;;;;;;;;;;;;;;;;-1:-1:-1;80705:44:0;-1:-1:-1;;;;;80705:44:0;;:::i;72537:119::-;;;;;;;;;;;;;;;;-1:-1:-1;72537:119:0;-1:-1:-1;;;;;72537:119:0;;:::i;65936:148::-;;;:::i;81318:114::-;;;;;;;;;;;;;;;;-1:-1:-1;81318:114:0;-1:-1:-1;;;;;81318:114:0;;:::i;65285:87::-;;;:::i;:::-;;;;-1:-1:-1;;;;;65285:87:0;;;;;;;;;;;;;;71501;;;:::i;80970:105::-;;;;;;;;;;;;;;;;-1:-1:-1;80970:105:0;-1:-1:-1;;;;;80970:105:0;;:::i;81440:139::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;81440:139:0;;;;;;;;:::i;75499:269::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;75499:269:0;;;;;;;;:::i;72869:175::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;72869:175:0;;;;;;;;:::i;73107:151::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;73107:151:0;;;;;;;;;;:::i;66239:244::-;;;;;;;;;;;;;;;;-1:-1:-1;66239:244:0;-1:-1:-1;;;;;66239:244:0;;:::i;71299:83::-;71369:5;71362:12;;;;;;;;-1:-1:-1;;71362:12:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;71336:13;;71362:12;;71369:5;;71362:12;;71369:5;71362:12;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;71299:83;:::o;73405:169::-;73488:4;73505:39;73514:12;:10;:12::i;:::-;73528:7;73537:6;73505:8;:39::i;:::-;-1:-1:-1;73562:4:0;73405:169;;;;:::o;80809:149::-;80899:10;80886:24;;;;:12;:24;;;;;;;;80878:42;;;;;-1:-1:-1;;;80878:42:0;;;;;;;;;;;;-1:-1:-1;;;80878:42:0;;;;;;;;;;;;;;;80931:19;80937:3;80942:7;80931:5;:19::i;:::-;80809:149;;:::o;81083:109::-;65516:12;:10;:12::i;:::-;-1:-1:-1;;;;;65505:23:0;:7;:5;:7::i;:::-;-1:-1:-1;;;;;65505:23:0;;65497:68;;;;;-1:-1:-1;;;65497:68:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;65497:68:0;;;;;;;;;;;;;;;-1:-1:-1;;;;;81154:22:0::1;81179:5;81154:22:::0;;;:12:::1;:22;::::0;;;;:30;;-1:-1:-1;;81154:30:0::1;::::0;;81083:109::o;72374:100::-;72454:12;;72374:100;:::o;74048:321::-;74154:4;74171:36;74181:6;74189:9;74200:6;74171:9;:36::i;:::-;74218:121;74227:6;74235:12;:10;:12::i;:::-;74249:89;74287:6;74249:89;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;74249:19:0;;;;;;:11;:19;;;;;;74269:12;:10;:12::i;:::-;-1:-1:-1;;;;;74249:33:0;;;;;;;;;;;;-1:-1:-1;74249:33:0;;;:89;:37;:89::i;:::-;74218:8;:121::i;:::-;-1:-1:-1;74357:4:0;74048:321;;;;;:::o;72226:83::-;72292:9;;;;72226:83;:::o;74778:218::-;74866:4;74883:83;74892:12;:10;:12::i;:::-;74906:7;74915:50;74954:10;74915:11;:25;74927:12;:10;:12::i;:::-;-1:-1:-1;;;;;74915:25:0;;;;;;;;;;;;;;;;;-1:-1:-1;74915:25:0;;;:34;;;;;;;;;;;:38;:50::i;81200:110::-;65516:12;:10;:12::i;:::-;-1:-1:-1;;;;;65505:23:0;:7;:5;:7::i;:::-;-1:-1:-1;;;;;65505:23:0;;65497:68;;;;;-1:-1:-1;;;65497:68:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;65497:68:0;;;;;;;;;;;;;;;-1:-1:-1;;;;;81273:22:0::1;;::::0;;;:12:::1;:22;::::0;;;;:29;;-1:-1:-1;;81273:29:0::1;81298:4;81273:29;::::0;;81200:110::o;80756:44::-;;;;;;;;;;;;;;;:::o;80705:::-;;;;;;;;;;;;;;;:::o;72537:119::-;-1:-1:-1;;;;;72630:18:0;72603:7;72630:18;;;;;;;;;;;;72537:119::o;65936:148::-;65516:12;:10;:12::i;:::-;-1:-1:-1;;;;;65505:23:0;:7;:5;:7::i;:::-;-1:-1:-1;;;;;65505:23:0;;65497:68;;;;;-1:-1:-1;;;65497:68:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;65497:68:0;;;;;;;;;;;;;;;66027:6:::1;::::0;66006:40:::1;::::0;66043:1:::1;::::0;66027:6:::1;::::0;::::1;-1:-1:-1::0;;;;;66027:6:0::1;::::0;66006:40:::1;::::0;66043:1;;66006:40:::1;66057:6;:19:::0;;-1:-1:-1;;;;;;66057:19:0::1;::::0;;65936:148::o;81318:114::-;65516:12;:10;:12::i;:::-;-1:-1:-1;;;;;65505:23:0;:7;:5;:7::i;:::-;-1:-1:-1;;;;;65505:23:0;;65497:68;;;;;-1:-1:-1;;;65497:68:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;65497:68:0;;;;;;;;;;;;;;;-1:-1:-1;;;;;81394:22:0::1;81419:5;81394:22:::0;;;:12:::1;:22;::::0;;;;:30;;-1:-1:-1;;81394:30:0::1;::::0;;81318:114::o;65285:87::-;65358:6;;;;;-1:-1:-1;;;;;65358:6:0;;65285:87::o;71501:::-;71573:7;71566:14;;;;;;;;-1:-1:-1;;71566:14:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;71540:13;;71566:14;;71573:7;;71566:14;;71573:7;71566:14;;;;;;;;;;;;;;;;;;;;;;;;80970:105;65516:12;:10;:12::i;:::-;-1:-1:-1;;;;;65505:23:0;:7;:5;:7::i;:::-;-1:-1:-1;;;;;65505:23:0;;65497:68;;;;;-1:-1:-1;;;65497:68:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;65497:68:0;;;;;;;;;;;;;;;-1:-1:-1;;;;;81038:22:0::1;;::::0;;;:12:::1;:22;::::0;;;;:29;;-1:-1:-1;;81038:29:0::1;81063:4;81038:29;::::0;;80970:105::o;81440:139::-;81527:10;81514:24;;;;:12;:24;;;;;;;;81506:33;;;;;;81550:21;81556:5;81563:7;81550:5;:21::i;75499:269::-;75592:4;75609:129;75618:12;:10;:12::i;:::-;75632:7;75641:96;75680:15;75641:96;;;;;;;;;;;;;;;;;:11;:25;75653:12;:10;:12::i;:::-;-1:-1:-1;;;;;75641:25:0;;;;;;;;;;;;;;;;;-1:-1:-1;75641:25:0;;;:34;;;;;;;;;;;:96;:38;:96::i;72869:175::-;72955:4;72972:42;72982:12;:10;:12::i;:::-;72996:9;73007:6;72972:9;:42::i;73107:151::-;-1:-1:-1;;;;;73223:18:0;;;73196:7;73223:18;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;73107:151::o;66239:244::-;65516:12;:10;:12::i;:::-;-1:-1:-1;;;;;65505:23:0;:7;:5;:7::i;:::-;-1:-1:-1;;;;;65505:23:0;;65497:68;;;;;-1:-1:-1;;;65497:68:0;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;65497:68:0;;;;;;;;;;;;;;;-1:-1:-1;;;;;66328:22:0;::::1;66320:73;;;;-1:-1:-1::0;;;66320:73:0::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;66430:6;::::0;66409:38:::1;::::0;-1:-1:-1;;;;;66409:38:0;;::::1;::::0;66430:6:::1;::::0;::::1;;::::0;66409:38:::1;::::0;;;::::1;66458:6;:17:::0;;-1:-1:-1;;;;;66458:17:0;;::::1;;;-1:-1:-1::0;;;;;;66458:17:0;;::::1;::::0;;;::::1;::::0;;66239:244::o;8114:106::-;8202:10;8114:106;:::o;78644:346::-;-1:-1:-1;;;;;78746:19:0;;78738:68;;;;-1:-1:-1;;;78738:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;78825:21:0;;78817:68;;;;-1:-1:-1;;;78817:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;78898:18:0;;;;;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;:36;;;78950:32;;;;;;;;;;;;;;;;;78644:346;;;:::o;77078:378::-;-1:-1:-1;;;;;77162:21:0;;77154:65;;;;;-1:-1:-1;;;77154:65:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;77232:49;77261:1;77265:7;77274:6;77232:20;:49::i;:::-;77309:12;;:24;;77326:6;77309:16;:24::i;:::-;77294:12;:39;-1:-1:-1;;;;;77365:18:0;;:9;:18;;;;;;;;;;;:30;;77388:6;77365:22;:30::i;:::-;-1:-1:-1;;;;;77344:18:0;;:9;:18;;;;;;;;;;;:51;;;;77411:37;;;;;;;77344:18;;:9;;77411:37;;;;;;;;;;77078:378;;:::o;76258:539::-;-1:-1:-1;;;;;76364:20:0;;76356:70;;;;-1:-1:-1;;;76356:70:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;76445:23:0;;76437:71;;;;-1:-1:-1;;;76437:71:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;76521:47;76542:6;76550:9;76561:6;76521:20;:47::i;:::-;76601:71;76623:6;76601:71;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;76601:17:0;;:9;:17;;;;;;;;;;;;:71;:21;:71::i;:::-;-1:-1:-1;;;;;76581:17:0;;;:9;:17;;;;;;;;;;;:91;;;;76706:20;;;;;;;:32;;76731:6;76706:24;:32::i;:::-;-1:-1:-1;;;;;76683:20:0;;;:9;:20;;;;;;;;;;;;:55;;;;76754:35;;;;;;;76683:20;;76754:35;;;;;;;;;;;;;76258:539;;;:::o;5663:166::-;5749:7;5785:12;5777:6;;;;5769:29;;;;-1:-1:-1;;;5769:29:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;5816:5:0;;;5663:166::o;2836:179::-;2894:7;2926:5;;;2950:6;;;;2942:46;;;;;-1:-1:-1;;;2942:46:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;3006:1;2836:179;-1:-1:-1;;;2836:179:0:o;77788:418::-;-1:-1:-1;;;;;77872:21:0;;77864:67;;;;-1:-1:-1;;;77864:67:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;77944:49;77965:7;77982:1;77986:6;77944:20;:49::i;:::-;78027:68;78050:6;78027:68;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;78027:18:0;;:9;:18;;;;;;;;;;;;:68;:22;:68::i;:::-;-1:-1:-1;;;;;78006:18:0;;:9;:18;;;;;;;;;;:89;78121:12;;:24;;78138:6;78121:16;:24::i;:::-;78106:12;:39;78161:37;;;;;;;;78187:1;;-1:-1:-1;;;;;78161:37:0;;;;;;;;;;;;77788:418;;:::o;80015:91::-;;;;:::o;3298:158::-;3356:7;3389:1;3384;:6;;3376:49;;;;;-1:-1:-1;;;3376:49:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;3443:5:0;;;3298:158::o
Swarm Source
ipfs://7f081e39bbd6a17c67bca485e3710f0abcad6c865aa296c1bb76be3e36cfa8fe
Loading...
Loading
Loading...
Loading
Multichain Portfolio | 30 Chains
Chain | Token | Portfolio % | Price | Amount | Value |
---|
Loading...
Loading
[ Download: CSV Export ]
A contract address hosts a smart contract, which is a set of code stored on the blockchain that runs when predetermined conditions are met. Learn more about addresses in our Knowledge Base.