Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: BSD 3-Clause License
pragma solidity ^0.8.24;

import {Math} from "lib/openzeppelin-contracts/contracts/utils/math/Math.sol";
import {IStakingNodesManager} from "src/interfaces/IStakingNodesManager.sol";
import {IRewardsDistributor} from "src/interfaces/IRewardsDistributor.sol";
import {IynETH} from "src/interfaces/IynETH.sol";

import {ynBase} from "src/ynBase.sol";


interface IYnETHEvents {
    event DepositETHPausedUpdated(bool isPaused);
    event Deposit(address indexed sender, address indexed receiver, uint256 assets, uint256 shares, uint256 totalDepositedInPool);
    event RewardsReceived(uint256 value, uint256 totalDepositedInPool);
    event ETHWithdrawn(uint256 ethAmount, uint256 totalDepositedInPool);
    event WithdrawnETHProcessed(uint256 ethAmount, uint256 totalDepositedInPool);
}

/**
 * @title ynETH
 * @dev The ynETH contract is a core component of the YieldNEst restaking protocol, facilitating the native restaking of ETH
 /// management of staking nodes, and distribution of rewards. It serves as the entry point for users to deposit ETH
 /// in exchange for ynETH tokens, representing their share of the staked ETH. 
 */
contract ynETH is IynETH, ynBase, IYnETHEvents {

    //--------------------------------------------------------------------------------------
    //----------------------------------  ERRORS  -------------------------------------------
    //--------------------------------------------------------------------------------------

    error Paused();
    error ZeroAddress();
    error ZeroETH();
    error NoDirectETHDeposit();
    error CallerNotStakingNodeManager(address expected, address provided);
    error NotRewardsDistributor(address caller);
    error InsufficientBalance();
    error TransferFailed();
    error CallerNotAuthorized(address caller);
    error ZeroShares();


    //--------------------------------------------------------------------------------------
    //----------------------------------  ROLES --------------------------------------------
    //--------------------------------------------------------------------------------------

    bytes32 public constant BURNER_ROLE = keccak256("BURNER_ROLE");

    //--------------------------------------------------------------------------------------
    //----------------------------------  VARIABLES  ---------------------------------------
    //--------------------------------------------------------------------------------------

    IStakingNodesManager public stakingNodesManager;
    IRewardsDistributor public rewardsDistributor;
    bool public depositsPaused;

    uint256 public totalDepositedInPool;

    //--------------------------------------------------------------------------------------
    //----------------------------------  INITIALIZATION  ----------------------------------
    //--------------------------------------------------------------------------------------

    /**
     * @notice Configuration for contract initialization.
     */
    struct Init {
        address admin;
        address pauser;
        address unpauser;
        IStakingNodesManager stakingNodesManager;
        IRewardsDistributor rewardsDistributor;
        address[] pauseWhitelist;
    }

    constructor() {
         _disableInitializers();
    }

    /**
     * @notice Initializes the contract.
     * @dev MUST be called during the contract upgrade to set up the proxies state.
     */
    function initialize(Init memory init)
        external
        notZeroAddress(init.admin)
        notZeroAddress(init.pauser)
        notZeroAddress(init.unpauser)
        notZeroAddress(address(init.stakingNodesManager))
        notZeroAddress(address(init.rewardsDistributor))
        initializer {
        __AccessControl_init();
        __ynBase_init("ynETH", "ynETH");

        _grantRole(DEFAULT_ADMIN_ROLE, init.admin);
        _grantRole(PAUSER_ROLE, init.pauser);
        _grantRole(UNPAUSER_ROLE, init.unpauser);
        stakingNodesManager = init.stakingNodesManager;
        rewardsDistributor = init.rewardsDistributor;

        _setTransfersPaused(true);  // transfers are initially paused
        _updatePauseWhitelist(init.pauseWhitelist, true);
    }

    receive() external payable {
        revert NoDirectETHDeposit();
    }

    //--------------------------------------------------------------------------------------
    //----------------------------------  DEPOSITS   ---------------------------------------
    //--------------------------------------------------------------------------------------
    
    /**
     * @notice Allows depositing ETH into the contract in exchange for shares.
     * @dev Mints shares equivalent to the deposited ETH value and assigns them to the receiver.
     * @param receiver The address to receive the minted shares.
     * @return shares The amount of shares minted for the deposited ETH.
     */
    function depositETH(address receiver) public payable returns (uint256 shares) {

        if (depositsPaused) {
            revert Paused();
        }

        if (msg.value == 0) {
            revert ZeroETH();
        }

        uint256 assets = msg.value;
        
        shares = previewDeposit(assets);

        if (shares == 0) {
            revert ZeroShares();
        }

        _mint(receiver, shares);

        totalDepositedInPool += assets;
        emit Deposit(msg.sender, receiver, assets, shares, totalDepositedInPool);
    }

    /**
     * @notice Calculates the amount of shares to be minted for a given deposit.
     * @param assets The amount of assets to be deposited.
     * @return The amount of shares to be minted.
     */
    function previewDeposit(uint256 assets) public view virtual returns (uint256) {
        return _convertToShares(assets, Math.Rounding.Floor);
    }

    /**
     * @notice Converts a given amount of assets to shares.
     * @param assets The amount of assets to be converted.
     * @return shares The equivalent amount of shares.
     */
    function convertToShares(uint256 assets) public view returns (uint256 shares) {
        return _convertToShares(assets, Math.Rounding.Floor);
    }

    /**
     * @notice Converts from ynETH to ETH using the current exchange rate.
     * The exchange rate is given by the total supply of ynETH and total ETH controlled by the protocol.
     */
    function _convertToShares(uint256 ethAmount, Math.Rounding rounding) internal view returns (uint256) {
        // 1:1 exchange rate on the first stake.
        // Use totalSupply to see if this is the boostrap call, not totalAssets
        if (totalSupply() == 0) {
            return ethAmount;
        }
        
        // deltaynETH = (ynETHSupply / totalControlled) * ethAmount
        return Math.mulDiv(
            ethAmount,
            totalSupply(),
            totalAssets(),
            rounding
        );
    }

    //--------------------------------------------------------------------------------------
    //----------------------------------  WITHDRAWALS --------------------------------------
    //--------------------------------------------------------------------------------------

    /**
     * @notice Calculates the amount of assets that would be redeemed for a given amount of shares at current block
     * @param shares The amount of shares to redeem.
     * @return assets The equivalent amount of assets.
     */
    function previewRedeem(uint256 shares) external view returns (uint256 assets) {
       return _convertToAssets(shares, Math.Rounding.Floor);
    }

    /**
     * @notice Converts a given amount of shares to assets at current block
     * @param shares The amount of shares to convert.
     * @return assets The equivalent amount of assets.
     */
    function convertToAssets(uint256 shares) external view returns (uint256 assets) {
       return _convertToAssets(shares, Math.Rounding.Floor);
    }

    /**
     * @dev Internal implementation of {convertToAssets}.
     */
    function _convertToAssets(uint256 shares, Math.Rounding rounding) internal view returns (uint256) {

        uint256 supply = totalSupply();

        // 1:1 exchange rate on the first stake.
        // Use totalSupply to see if this call is made before boostrap call, not totalAssets
        if (supply == 0) {
            return shares;
        }
        return Math.mulDiv(shares, totalAssets(), supply, rounding);
    }

    function burn(uint256 amount) external onlyRole(BURNER_ROLE) {
        _burn(msg.sender, amount);
    }

    //--------------------------------------------------------------------------------------
    //----------------------------------  ASSETS -------------------------------------------
    //--------------------------------------------------------------------------------------

    /**
     * @notice Calculates the total assets controlled by the protocol.
     * @dev This includes both the ETH deposited in the pool awaiting processing and the ETH already sent to validators on the beacon chain.
     * @return total The total amount of ETH in wei.
     */
    function totalAssets() public view returns (uint256) {
        uint256 total = 0;
        // Allocated ETH for deposits pending to be processed.
        total += totalDepositedInPool;
        // The total ETH sent to the beacon chain.
        total += totalDeposited();
        return total;
    }

    /**
     * @notice Returns the total amount of ETH deposited across all validators.
     * @return totalDeposited The total amount of ETH deposited in all validators.
     */
    function totalDeposited() internal view returns (uint256) {

        return stakingNodesManager.totalDeposited();
    }

    //--------------------------------------------------------------------------------------
    //----------------------------------  STAKING/UNSTAKING and REWARDS  -------------------
    //--------------------------------------------------------------------------------------

    /**
     * @dev Receives rewards in ETH and adds them to the total deposited in the pool.
     * Only the rewards distributor contract can call this function.
     * Reverts if called by any address other than the rewards distributor.
     */
    function receiveRewards() external payable {
        if (msg.sender != address(rewardsDistributor)) {
            revert NotRewardsDistributor(msg.sender);
        }
        totalDepositedInPool += msg.value;

        emit RewardsReceived(msg.value, totalDepositedInPool);
    }

    /**
     * @dev Withdraws a specified amount of ETH from the pool to the Staking Nodes Manager.
     * This function can only be called by the Staking Nodes Manager.
     * @param ethAmount The amount of ETH to withdraw in wei.
     */
    function withdrawETH(uint256 ethAmount) public onlyStakingNodesManager override {
        uint256 currentTotalDepositedInPool = totalDepositedInPool;

        // Check if the pool has enough ETH to fulfill the withdrawal request.
        if (currentTotalDepositedInPool < ethAmount) {
            revert InsufficientBalance();
        }

        // Deduct the withdrawal amount from the total deposited in the pool.
        uint256 newTotalDepositedInPool = currentTotalDepositedInPool - ethAmount;
        totalDepositedInPool = newTotalDepositedInPool;

        // Transfer the specified amount of ETH to the Staking Nodes Manager.
        (bool success, ) = payable(address(stakingNodesManager)).call{value: ethAmount}("");
        if (!success) {
            revert TransferFailed();
        }

        emit ETHWithdrawn(ethAmount, newTotalDepositedInPool);
    }

    /**
     * @dev Processes ETH that has been withdrawn from the staking nodes and adds it to the pool.
     * This function can only be called by the Staking Nodes Manager.
     * It increases the total deposited in the pool by the amount of ETH sent with the call.
     */
    function processWithdrawnETH() public payable {

        // ETH can be returned either by the stakingNodesManager or by the redemptionAssetsVault
        if (!(msg.sender == address(stakingNodesManager)
            || msg.sender == (address(stakingNodesManager.redemptionAssetsVault())))) {
            revert CallerNotAuthorized(msg.sender);
        }
        totalDepositedInPool += msg.value;

        emit WithdrawnETHProcessed(msg.value, totalDepositedInPool);
    }

    //--------------------------------------------------------------------------------------
    //----------------------------------  PAUSING  -----------------------------------------
    //--------------------------------------------------------------------------------------

    /**
     * @notice Pauses ETH deposits.
     * @dev Can only be called by an account with the PAUSER_ROLE.
     */
    function pauseDeposits() external onlyRole(PAUSER_ROLE) {
        depositsPaused = true;
        emit DepositETHPausedUpdated(depositsPaused);
    }

    /**
     * @notice Unpauses ETH deposits.
     * @dev Can only be called by an account with the UNPAUSER_ROLE.
     */
    function unpauseDeposits() external onlyRole(UNPAUSER_ROLE) {
        depositsPaused = false;
        emit DepositETHPausedUpdated(depositsPaused);
    }
    
    //--------------------------------------------------------------------------------------
    //----------------------------------  MODIFIERS   ---------------------------------------
    //--------------------------------------------------------------------------------------

    /**
     * @dev Ensures that the function is only called by the Staking Nodes Manager.
     */
    modifier onlyStakingNodesManager() {
        if (msg.sender != address(stakingNodesManager)) {
            revert CallerNotStakingNodeManager(
                address(stakingNodesManager),
                msg.sender
            );
        }
        _;
    }

    /**
     * @notice Ensure that the given address is not the zero address.
     * @param _address The address to check.
     */
    modifier notZeroAddress(address _address) {
        if (_address == address(0)) {
            revert ZeroAddress();
        }
        _;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

import {Panic} from "../Panic.sol";
import {SafeCast} from "./SafeCast.sol";

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Returns the addition of two unsigned integers, with an success flag (no overflow).
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an success flag (no overflow).
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an success flag (no overflow).
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a success flag (no division by zero).
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a success flag (no division by zero).
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool success, uint256 result) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Branchless ternary evaluation for `a ? b : c`. Gas costs are constant.
     *
     * IMPORTANT: This function may reduce bytecode size and consume less gas when used standalone.
     * However, the compiler may optimize Solidity ternary operations (i.e. `a ? b : c`) to only compute
     * one branch when needed, making this function more expensive.
     */
    function ternary(bool condition, uint256 a, uint256 b) internal pure returns (uint256) {
        unchecked {
            // branchless ternary works because:
            // b ^ (a ^ b) == a
            // b ^ 0 == b
            return b ^ ((a ^ b) * SafeCast.toUint(condition));
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return ternary(a > b, a, b);
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return ternary(a < b, a, b);
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            Panic.panic(Panic.DIVISION_BY_ZERO);
        }

        // The following calculation ensures accurate ceiling division without overflow.
        // Since a is non-zero, (a - 1) / b will not overflow.
        // The largest possible result occurs when (a - 1) / b is type(uint256).max,
        // but the largest value we can obtain is type(uint256).max - 1, which happens
        // when a = type(uint256).max and b = 1.
        unchecked {
            return SafeCast.toUint(a > 0) * ((a - 1) / b + 1);
        }
    }

    /**
     * @dev Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     *
     * Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2²⁵⁶ and mod 2²⁵⁶ - 1, then use
            // the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2²⁵⁶ + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2²⁵⁶. Also prevents denominator == 0.
            if (denominator <= prod1) {
                Panic.panic(ternary(denominator == 0, Panic.DIVISION_BY_ZERO, Panic.UNDER_OVERFLOW));
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2²⁵⁶ / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2²⁵⁶. Now that denominator is an odd number, it has an inverse modulo 2²⁵⁶ such
            // that denominator * inv ≡ 1 mod 2²⁵⁶. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv ≡ 1 mod 2⁴.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2⁸
            inverse *= 2 - denominator * inverse; // inverse mod 2¹⁶
            inverse *= 2 - denominator * inverse; // inverse mod 2³²
            inverse *= 2 - denominator * inverse; // inverse mod 2⁶⁴
            inverse *= 2 - denominator * inverse; // inverse mod 2¹²⁸
            inverse *= 2 - denominator * inverse; // inverse mod 2²⁵⁶

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2²⁵⁶. Since the preconditions guarantee that the outcome is
            // less than 2²⁵⁶, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @dev Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        return mulDiv(x, y, denominator) + SafeCast.toUint(unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0);
    }

    /**
     * @dev Calculate the modular multiplicative inverse of a number in Z/nZ.
     *
     * If n is a prime, then Z/nZ is a field. In that case all elements are inversible, expect 0.
     * If n is not a prime, then Z/nZ is not a field, and some elements might not be inversible.
     *
     * If the input value is not inversible, 0 is returned.
     *
     * NOTE: If you know for sure that n is (big) a prime, it may be cheaper to use Fermat's little theorem and get the
     * inverse using `Math.modExp(a, n - 2, n)`. See {invModPrime}.
     */
    function invMod(uint256 a, uint256 n) internal pure returns (uint256) {
        unchecked {
            if (n == 0) return 0;

            // The inverse modulo is calculated using the Extended Euclidean Algorithm (iterative version)
            // Used to compute integers x and y such that: ax + ny = gcd(a, n).
            // When the gcd is 1, then the inverse of a modulo n exists and it's x.
            // ax + ny = 1
            // ax = 1 + (-y)n
            // ax ≡ 1 (mod n) # x is the inverse of a modulo n

            // If the remainder is 0 the gcd is n right away.
            uint256 remainder = a % n;
            uint256 gcd = n;

            // Therefore the initial coefficients are:
            // ax + ny = gcd(a, n) = n
            // 0a + 1n = n
            int256 x = 0;
            int256 y = 1;

            while (remainder != 0) {
                uint256 quotient = gcd / remainder;

                (gcd, remainder) = (
                    // The old remainder is the next gcd to try.
                    remainder,
                    // Compute the next remainder.
                    // Can't overflow given that (a % gcd) * (gcd // (a % gcd)) <= gcd
                    // where gcd is at most n (capped to type(uint256).max)
                    gcd - remainder * quotient
                );

                (x, y) = (
                    // Increment the coefficient of a.
                    y,
                    // Decrement the coefficient of n.
                    // Can overflow, but the result is casted to uint256 so that the
                    // next value of y is "wrapped around" to a value between 0 and n - 1.
                    x - y * int256(quotient)
                );
            }

            if (gcd != 1) return 0; // No inverse exists.
            return ternary(x < 0, n - uint256(-x), uint256(x)); // Wrap the result if it's negative.
        }
    }

    /**
     * @dev Variant of {invMod}. More efficient, but only works if `p` is known to be a prime greater than `2`.
     *
     * From https://en.wikipedia.org/wiki/Fermat%27s_little_theorem[Fermat's little theorem], we know that if p is
     * prime, then `a**(p-1) ≡ 1 mod p`. As a consequence, we have `a * a**(p-2) ≡ 1 mod p`, which means that
     * `a**(p-2)` is the modular multiplicative inverse of a in Fp.
     *
     * NOTE: this function does NOT check that `p` is a prime greater than `2`.
     */
    function invModPrime(uint256 a, uint256 p) internal view returns (uint256) {
        unchecked {
            return Math.modExp(a, p - 2, p);
        }
    }

    /**
     * @dev Returns the modular exponentiation of the specified base, exponent and modulus (b ** e % m)
     *
     * Requirements:
     * - modulus can't be zero
     * - underlying staticcall to precompile must succeed
     *
     * IMPORTANT: The result is only valid if the underlying call succeeds. When using this function, make
     * sure the chain you're using it on supports the precompiled contract for modular exponentiation
     * at address 0x05 as specified in https://eips.ethereum.org/EIPS/eip-198[EIP-198]. Otherwise,
     * the underlying function will succeed given the lack of a revert, but the result may be incorrectly
     * interpreted as 0.
     */
    function modExp(uint256 b, uint256 e, uint256 m) internal view returns (uint256) {
        (bool success, uint256 result) = tryModExp(b, e, m);
        if (!success) {
            Panic.panic(Panic.DIVISION_BY_ZERO);
        }
        return result;
    }

    /**
     * @dev Returns the modular exponentiation of the specified base, exponent and modulus (b ** e % m).
     * It includes a success flag indicating if the operation succeeded. Operation will be marked as failed if trying
     * to operate modulo 0 or if the underlying precompile reverted.
     *
     * IMPORTANT: The result is only valid if the success flag is true. When using this function, make sure the chain
     * you're using it on supports the precompiled contract for modular exponentiation at address 0x05 as specified in
     * https://eips.ethereum.org/EIPS/eip-198[EIP-198]. Otherwise, the underlying function will succeed given the lack
     * of a revert, but the result may be incorrectly interpreted as 0.
     */
    function tryModExp(uint256 b, uint256 e, uint256 m) internal view returns (bool success, uint256 result) {
        if (m == 0) return (false, 0);
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            // | Offset    | Content    | Content (Hex)                                                      |
            // |-----------|------------|--------------------------------------------------------------------|
            // | 0x00:0x1f | size of b  | 0x0000000000000000000000000000000000000000000000000000000000000020 |
            // | 0x20:0x3f | size of e  | 0x0000000000000000000000000000000000000000000000000000000000000020 |
            // | 0x40:0x5f | size of m  | 0x0000000000000000000000000000000000000000000000000000000000000020 |
            // | 0x60:0x7f | value of b | 0x<.............................................................b> |
            // | 0x80:0x9f | value of e | 0x<.............................................................e> |
            // | 0xa0:0xbf | value of m | 0x<.............................................................m> |
            mstore(ptr, 0x20)
            mstore(add(ptr, 0x20), 0x20)
            mstore(add(ptr, 0x40), 0x20)
            mstore(add(ptr, 0x60), b)
            mstore(add(ptr, 0x80), e)
            mstore(add(ptr, 0xa0), m)

            // Given the result < m, it's guaranteed to fit in 32 bytes,
            // so we can use the memory scratch space located at offset 0.
            success := staticcall(gas(), 0x05, ptr, 0xc0, 0x00, 0x20)
            result := mload(0x00)
        }
    }

    /**
     * @dev Variant of {modExp} that supports inputs of arbitrary length.
     */
    function modExp(bytes memory b, bytes memory e, bytes memory m) internal view returns (bytes memory) {
        (bool success, bytes memory result) = tryModExp(b, e, m);
        if (!success) {
            Panic.panic(Panic.DIVISION_BY_ZERO);
        }
        return result;
    }

    /**
     * @dev Variant of {tryModExp} that supports inputs of arbitrary length.
     */
    function tryModExp(
        bytes memory b,
        bytes memory e,
        bytes memory m
    ) internal view returns (bool success, bytes memory result) {
        if (_zeroBytes(m)) return (false, new bytes(0));

        uint256 mLen = m.length;

        // Encode call args in result and move the free memory pointer
        result = abi.encodePacked(b.length, e.length, mLen, b, e, m);

        /// @solidity memory-safe-assembly
        assembly {
            let dataPtr := add(result, 0x20)
            // Write result on top of args to avoid allocating extra memory.
            success := staticcall(gas(), 0x05, dataPtr, mload(result), dataPtr, mLen)
            // Overwrite the length.
            // result.length > returndatasize() is guaranteed because returndatasize() == m.length
            mstore(result, mLen)
            // Set the memory pointer after the returned data.
            mstore(0x40, add(dataPtr, mLen))
        }
    }

    /**
     * @dev Returns whether the provided byte array is zero.
     */
    function _zeroBytes(bytes memory byteArray) private pure returns (bool) {
        for (uint256 i = 0; i < byteArray.length; ++i) {
            if (byteArray[i] != 0) {
                return false;
            }
        }
        return true;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * This method is based on Newton's method for computing square roots; the algorithm is restricted to only
     * using integer operations.
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        unchecked {
            // Take care of easy edge cases when a == 0 or a == 1
            if (a <= 1) {
                return a;
            }

            // In this function, we use Newton's method to get a root of `f(x) := x² - a`. It involves building a
            // sequence x_n that converges toward sqrt(a). For each iteration x_n, we also define the error between
            // the current value as `ε_n = | x_n - sqrt(a) |`.
            //
            // For our first estimation, we consider `e` the smallest power of 2 which is bigger than the square root
            // of the target. (i.e. `2**(e-1) ≤ sqrt(a) < 2**e`). We know that `e ≤ 128` because `(2¹²⁸)² = 2²⁵⁶` is
            // bigger than any uint256.
            //
            // By noticing that
            // `2**(e-1) ≤ sqrt(a) < 2**e → (2**(e-1))² ≤ a < (2**e)² → 2**(2*e-2) ≤ a < 2**(2*e)`
            // we can deduce that `e - 1` is `log2(a) / 2`. We can thus compute `x_n = 2**(e-1)` using a method similar
            // to the msb function.
            uint256 aa = a;
            uint256 xn = 1;

            if (aa >= (1 << 128)) {
                aa >>= 128;
                xn <<= 64;
            }
            if (aa >= (1 << 64)) {
                aa >>= 64;
                xn <<= 32;
            }
            if (aa >= (1 << 32)) {
                aa >>= 32;
                xn <<= 16;
            }
            if (aa >= (1 << 16)) {
                aa >>= 16;
                xn <<= 8;
            }
            if (aa >= (1 << 8)) {
                aa >>= 8;
                xn <<= 4;
            }
            if (aa >= (1 << 4)) {
                aa >>= 4;
                xn <<= 2;
            }
            if (aa >= (1 << 2)) {
                xn <<= 1;
            }

            // We now have x_n such that `x_n = 2**(e-1) ≤ sqrt(a) < 2**e = 2 * x_n`. This implies ε_n ≤ 2**(e-1).
            //
            // We can refine our estimation by noticing that the middle of that interval minimizes the error.
            // If we move x_n to equal 2**(e-1) + 2**(e-2), then we reduce the error to ε_n ≤ 2**(e-2).
            // This is going to be our x_0 (and ε_0)
            xn = (3 * xn) >> 1; // ε_0 := | x_0 - sqrt(a) | ≤ 2**(e-2)

            // From here, Newton's method give us:
            // x_{n+1} = (x_n + a / x_n) / 2
            //
            // One should note that:
            // x_{n+1}² - a = ((x_n + a / x_n) / 2)² - a
            //              = ((x_n² + a) / (2 * x_n))² - a
            //              = (x_n⁴ + 2 * a * x_n² + a²) / (4 * x_n²) - a
            //              = (x_n⁴ + 2 * a * x_n² + a² - 4 * a * x_n²) / (4 * x_n²)
            //              = (x_n⁴ - 2 * a * x_n² + a²) / (4 * x_n²)
            //              = (x_n² - a)² / (2 * x_n)²
            //              = ((x_n² - a) / (2 * x_n))²
            //              ≥ 0
            // Which proves that for all n ≥ 1, sqrt(a) ≤ x_n
            //
            // This gives us the proof of quadratic convergence of the sequence:
            // ε_{n+1} = | x_{n+1} - sqrt(a) |
            //         = | (x_n + a / x_n) / 2 - sqrt(a) |
            //         = | (x_n² + a - 2*x_n*sqrt(a)) / (2 * x_n) |
            //         = | (x_n - sqrt(a))² / (2 * x_n) |
            //         = | ε_n² / (2 * x_n) |
            //         = ε_n² / | (2 * x_n) |
            //
            // For the first iteration, we have a special case where x_0 is known:
            // ε_1 = ε_0² / | (2 * x_0) |
            //     ≤ (2**(e-2))² / (2 * (2**(e-1) + 2**(e-2)))
            //     ≤ 2**(2*e-4) / (3 * 2**(e-1))
            //     ≤ 2**(e-3) / 3
            //     ≤ 2**(e-3-log2(3))
            //     ≤ 2**(e-4.5)
            //
            // For the following iterations, we use the fact that, 2**(e-1) ≤ sqrt(a) ≤ x_n:
            // ε_{n+1} = ε_n² / | (2 * x_n) |
            //         ≤ (2**(e-k))² / (2 * 2**(e-1))
            //         ≤ 2**(2*e-2*k) / 2**e
            //         ≤ 2**(e-2*k)
            xn = (xn + a / xn) >> 1; // ε_1 := | x_1 - sqrt(a) | ≤ 2**(e-4.5)  -- special case, see above
            xn = (xn + a / xn) >> 1; // ε_2 := | x_2 - sqrt(a) | ≤ 2**(e-9)    -- general case with k = 4.5
            xn = (xn + a / xn) >> 1; // ε_3 := | x_3 - sqrt(a) | ≤ 2**(e-18)   -- general case with k = 9
            xn = (xn + a / xn) >> 1; // ε_4 := | x_4 - sqrt(a) | ≤ 2**(e-36)   -- general case with k = 18
            xn = (xn + a / xn) >> 1; // ε_5 := | x_5 - sqrt(a) | ≤ 2**(e-72)   -- general case with k = 36
            xn = (xn + a / xn) >> 1; // ε_6 := | x_6 - sqrt(a) | ≤ 2**(e-144)  -- general case with k = 72

            // Because e ≤ 128 (as discussed during the first estimation phase), we know have reached a precision
            // ε_6 ≤ 2**(e-144) < 1. Given we're operating on integers, then we can ensure that xn is now either
            // sqrt(a) or sqrt(a) + 1.
            return xn - SafeCast.toUint(xn > a / xn);
        }
    }

    /**
     * @dev Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && result * result < a);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        uint256 exp;
        unchecked {
            exp = 128 * SafeCast.toUint(value > (1 << 128) - 1);
            value >>= exp;
            result += exp;

            exp = 64 * SafeCast.toUint(value > (1 << 64) - 1);
            value >>= exp;
            result += exp;

            exp = 32 * SafeCast.toUint(value > (1 << 32) - 1);
            value >>= exp;
            result += exp;

            exp = 16 * SafeCast.toUint(value > (1 << 16) - 1);
            value >>= exp;
            result += exp;

            exp = 8 * SafeCast.toUint(value > (1 << 8) - 1);
            value >>= exp;
            result += exp;

            exp = 4 * SafeCast.toUint(value > (1 << 4) - 1);
            value >>= exp;
            result += exp;

            exp = 2 * SafeCast.toUint(value > (1 << 2) - 1);
            value >>= exp;
            result += exp;

            result += SafeCast.toUint(value > 1);
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 1 << result < value);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 10 ** result < value);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        uint256 isGt;
        unchecked {
            isGt = SafeCast.toUint(value > (1 << 128) - 1);
            value >>= isGt * 128;
            result += isGt * 16;

            isGt = SafeCast.toUint(value > (1 << 64) - 1);
            value >>= isGt * 64;
            result += isGt * 8;

            isGt = SafeCast.toUint(value > (1 << 32) - 1);
            value >>= isGt * 32;
            result += isGt * 4;

            isGt = SafeCast.toUint(value > (1 << 16) - 1);
            value >>= isGt * 16;
            result += isGt * 2;

            result += SafeCast.toUint(value > (1 << 8) - 1);
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + SafeCast.toUint(unsignedRoundsUp(rounding) && 1 << (result << 3) < value);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}

// SPDX-License-Identifier: BSD 3-Clause License
pragma solidity ^0.8.24;

import {UpgradeableBeacon} from "lib/openzeppelin-contracts/contracts/proxy/beacon/UpgradeableBeacon.sol";
import {IDelegationManager} from "lib/eigenlayer-contracts/src/contracts/interfaces/IDelegationManager.sol";
import {IStrategyManager} from "lib/eigenlayer-contracts/src/contracts/interfaces/IStrategyManager.sol";
import {RewardsType} from "src/interfaces/IRewardsDistributor.sol";
import {IEigenPodManager} from "lib/eigenlayer-contracts/src/contracts/interfaces/IEigenPodManager.sol";
import {IStakingNode} from "src/interfaces/IStakingNode.sol";
import {IRedemptionAssetsVault} from "src/interfaces/IRedemptionAssetsVault.sol";


interface IStakingNodesManager {

    struct ValidatorData {
        bytes publicKey;
        bytes signature;
        bytes32 depositDataRoot;
        uint256 nodeId;
    }

    struct Validator {
        bytes publicKey;
        uint256 nodeId;
    }

    struct WithdrawalAction {
        uint256 nodeId;
        uint256 amountToReinvest;
        uint256 amountToQueue;
        uint256 rewardsAmount;
    }

    function eigenPodManager() external view returns (IEigenPodManager);
    function delegationManager() external view returns (IDelegationManager);
    function strategyManager() external view returns (IStrategyManager);

    function getAllValidators() external view returns (Validator[] memory);
    function getAllNodes() external view returns (IStakingNode[] memory);
    function isStakingNodesOperator(address) external view returns (bool);
    function isStakingNodesDelegator(address _address) external view returns (bool);
    function processRewards(uint256 nodeId, RewardsType rewardsType) external payable;
    function registerValidators(
        ValidatorData[] calldata _depositData
    ) external;
    function nodesLength() external view returns (uint256);

    function upgradeableBeacon() external returns (UpgradeableBeacon);

    function totalDeposited() external view returns (uint256);

    function processPrincipalWithdrawals(
        WithdrawalAction[] memory actions
    ) external;

    function redemptionAssetsVault() external returns (IRedemptionAssetsVault);

    function isStakingNodesWithdrawer(address _address) external view returns (bool);

    function nodes(uint256 index) external view returns (IStakingNode);
}

// SPDX-License-Identifier: BSD 3-Clause License
pragma solidity ^0.8.24;

import {IRewardsReceiver} from "src/interfaces/IRewardsReceiver.sol";

enum RewardsType {
    ExecutionLayer,
    ConsensusLayer
}

interface IRewardsDistributor {

    /// @notice Returns the address of the ynETH token.
    /// @return address of the ynETH token.
    function ynETH() external view returns (address);

    /// @notice Processes the rewards for the execution and consensus layer.
    /// @dev This function should be called by off-chain rewards distribution service.
    function processRewards() external;

    /// @notice Returns the address of the execution layer rewards receiver.
    /// @return address of the execution layer rewards receiver.
    function executionLayerReceiver() external view returns (IRewardsReceiver);

    /// @notice Returns the address of the consensus layer rewards receiver.
    /// @return address of the consensus layer rewards receiver.
    function consensusLayerReceiver() external view returns (IRewardsReceiver);

    /// @notice Returns the address of the fees receiver.
    /// @return address of the fees receiver.
    function feesReceiver() external view returns (address);

    /// @notice Returns the protocol fees in basis points (1/10000).
    /// @return uint16 fees in basis points.
    function feesBasisPoints() external view returns (uint16);

    /// @notice Sets the address to receive protocol fees.
    /// @param newReceiver The new fees receiver address.
    function setFeesReceiver(address payable newReceiver) external;

    /// @notice Sets the protocol fees in basis points (1/10000).
    /// @param newFeesBasisPoints The new fees in basis points.
    function setFeesBasisPoints(uint16 newFeesBasisPoints) external;
}

// SPDX-License-Identifier: BSD 3-Clause License
pragma solidity ^0.8.24;

import {IERC20} from "lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol";
import {IRedeemableAsset} from "src/interfaces/IRedeemableAsset.sol";
import {IStakingNodesManager} from "src/interfaces/IStakingNodesManager.sol";


interface IynETH is IERC20, IRedeemableAsset {
    function withdrawETH(uint256 ethAmount) external;
    function processWithdrawnETH() external payable;
    function receiveRewards() external payable;
    function pauseDeposits() external;
    function unpauseDeposits() external;
    
    /// @notice Allows depositing ETH into the contract in exchange for shares.
    /// @param receiver The address to receive the minted shares.
    /// @return shares The amount of shares minted for the deposited ETH.
    function depositETH(address receiver) external payable returns (uint256 shares);

    function previewRedeem(uint256 shares) external view returns (uint256);

    /// @notice Returns the total amount of assets managed by the contract.
    /// @return The total amount of assets in wei.
    function totalAssets() external view returns (uint256);

    /// @notice Returns the address of the StakingNodesManager contract.
    /// @return The address of the StakingNodesManager contract.
    function stakingNodesManager() external view returns (IStakingNodesManager);

    /// @notice Simulates the effects of a deposit at the current block, given the amount of assets.
    /// @param assets The amount of assets to simulate depositing.
    /// @return shares The amount of shares that would be minted.
    function previewDeposit(uint256 assets) external view returns (uint256 shares);
}

// SPDX-License-Identifier: BSD 3-Clause License
pragma solidity ^0.8.24;

import "lib/openzeppelin-contracts-upgradeable/contracts/token/ERC20/ERC20Upgradeable.sol";
import "lib/openzeppelin-contracts-upgradeable/contracts/access/AccessControlUpgradeable.sol";


interface IynBaseEvents {
    event TransfersUnpaused();
    event PauseWhitelistUpdated(address indexed account, bool isWhitelisted);
}

/// @title ynBase
/// @dev This contract serves as the base for the YieldNest protocol, providing core functionalities such as
/// ERC20 token mechanics, access control, and transfer pause capabilities.
/// It integrates with OpenZeppelin's upgradeable contracts for ERC20 and AccessControl functionalities.
/// The contract includes mechanisms to pause transfers, manage a whitelist for paused transfers, and handle initialization processes.
contract ynBase is ERC20Upgradeable, AccessControlUpgradeable, IynBaseEvents {

    //--------------------------------------------------------------------------------------
    //----------------------------------  ERRORS  ------------------------------------------
    //--------------------------------------------------------------------------------------

    error TransfersPaused();

    //--------------------------------------------------------------------------------------
    //----------------------------------  ROLES  -------------------------------------------
    //--------------------------------------------------------------------------------------

    /// @notice  Role is allowed to set the pause state
    bytes32 public constant PAUSER_ROLE = keccak256("PAUSER_ROLE");

    /// @notice Role allowed to unset the pause state
    bytes32 public constant UNPAUSER_ROLE = keccak256("UNPAUSER_ROLE");

    //--------------------------------------------------------------------------------------
    //----------------------------------  STORAGE  -----------------------------------------
    //--------------------------------------------------------------------------------------

    /// @custom:storage-location erc7201:yieldnest.storage.ynBase
    struct ynBaseStorage {
        mapping (address => bool) pauseWhiteList;
        bool transfersPaused;
    }

    // keccak256(abi.encode(uint256(keccak256("erc7201:yieldnest.storage.ynBase")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant ynBaseStorageLocation = 0x7e7ba5b20f89141f0255e9704ce6ce6e55f5f28e4fc0d626fc76bedba3053200;

    function _getYnBaseStorage() private pure returns (ynBaseStorage storage $) {
        assembly {
            $.slot := ynBaseStorageLocation
        }
    }

    //--------------------------------------------------------------------------------------
    //----------------------------------  INITIALIZATION  ----------------------------------
    //--------------------------------------------------------------------------------------

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    function __ynBase_init(string memory name_, string memory symbol_) internal onlyInitializing {
        __ERC20_init(name_, symbol_);
    }

    //--------------------------------------------------------------------------------------
    //----------------------------------  BOOTSTRAP TRANSFERS PAUSE  -----------------------
    //--------------------------------------------------------------------------------------

    /**
     * @dev Hooks into the transfer events of ERC20 with checks for paused transfers and whitelist exemptions.
     * Reverts if transfers are paused, the sender is not whitelisted, and the transfer is not a mint or burn operation.
     * @param from Address sending the tokens
     * @param to Address receiving the tokens
     * @param amount Amount of tokens being transferred
     */
    function _update(address from, address to, uint256 amount) internal virtual override {

        ynBaseStorage storage $ = _getYnBaseStorage();
        // revert if transfers are paused, the from is not on the whitelist and
        // it's neither a mint (from = 0) nor a burn (to = 0)
        if ($.transfersPaused && !$.pauseWhiteList[from] && from != address(0) && to != address(0)) {
            revert TransfersPaused();
        }
        super._update(from, to, amount);
    }
    
    /// @dev This is a one-way toggle. Once unpaused, transfers can't be paused again.
    function unpauseTransfers() external onlyRole(UNPAUSER_ROLE) {
        ynBaseStorage storage $ = _getYnBaseStorage();
        $.transfersPaused = false;
        emit TransfersUnpaused();
    }
    
    /**
     * @dev Adds addresses to the pause whitelist, allowing them to transfer tokens even when transfers are paused.
     * Can only be called by an account with the `UNPAUSER_ROLE`.
     * @param whitelistedForTransfers An array of addresses to be added to the whitelist.
     */
    function addToPauseWhitelist(address[] memory whitelistedForTransfers) external onlyRole(UNPAUSER_ROLE) {
        _updatePauseWhitelist(whitelistedForTransfers, true);
    }

    /**
     * @dev Removes addresses from the pause whitelist, preventing them from transferring tokens when transfers are paused.
     * Can only be called by an account with the `UNPAUSER_ROLE`.
     * @param unlisted An array of addresses to be removed from the whitelist.
     */
    function removeFromPauseWhitelist(address[] memory unlisted) external onlyRole(UNPAUSER_ROLE) {
        _updatePauseWhitelist(unlisted, false);
    }

    /**
     * @dev Internal function to update the pause whitelist status of addresses.
     * @param whitelistedForTransfers An array of addresses whose whitelist status is to be updated.
     * @param whitelisted The whitelist status to be set for the provided addresses.
     */
    function _updatePauseWhitelist(address[] memory whitelistedForTransfers, bool whitelisted) internal {
        ynBaseStorage storage $ = _getYnBaseStorage();
        for (uint256 i = 0; i < whitelistedForTransfers.length; i++) {
            address targetAddress = whitelistedForTransfers[i];
            $.pauseWhiteList[targetAddress] = whitelisted;
            emit PauseWhitelistUpdated(targetAddress, whitelisted);
        }
    }

    /**
     * @dev Internal function to set the paused status of transfers.
     * @param _transfersPaused The paused status to be set.
     */
    function _setTransfersPaused(bool _transfersPaused) internal {
        ynBaseStorage storage $ = _getYnBaseStorage();
        $.transfersPaused = _transfersPaused;
    }

    /**
     * @dev Returns true if the address is in the pause whitelist, false otherwise.
     */
    function pauseWhiteList(address addr) public view returns (bool) {
        ynBaseStorage storage $ = _getYnBaseStorage();
        return $.pauseWhiteList[addr];
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

/**
 * @dev Helper library for emitting standardized panic codes.
 *
 * ```solidity
 * contract Example {
 *      using Panic for uint256;
 *
 *      // Use any of the declared internal constants
 *      function foo() { Panic.GENERIC.panic(); }
 *
 *      // Alternatively
 *      function foo() { Panic.panic(Panic.GENERIC); }
 * }
 * ```
 *
 * Follows the list from https://github.com/ethereum/solidity/blob/v0.8.24/libsolutil/ErrorCodes.h[libsolutil].
 */
// slither-disable-next-line unused-state
library Panic {
    /// @dev generic / unspecified error
    uint256 internal constant GENERIC = 0x00;
    /// @dev used by the assert() builtin
    uint256 internal constant ASSERT = 0x01;
    /// @dev arithmetic underflow or overflow
    uint256 internal constant UNDER_OVERFLOW = 0x11;
    /// @dev division or modulo by zero
    uint256 internal constant DIVISION_BY_ZERO = 0x12;
    /// @dev enum conversion error
    uint256 internal constant ENUM_CONVERSION_ERROR = 0x21;
    /// @dev invalid encoding in storage
    uint256 internal constant STORAGE_ENCODING_ERROR = 0x22;
    /// @dev empty array pop
    uint256 internal constant EMPTY_ARRAY_POP = 0x31;
    /// @dev array out of bounds access
    uint256 internal constant ARRAY_OUT_OF_BOUNDS = 0x32;
    /// @dev resource error (too large allocation or too large array)
    uint256 internal constant RESOURCE_ERROR = 0x41;
    /// @dev calling invalid internal function
    uint256 internal constant INVALID_INTERNAL_FUNCTION = 0x51;

    /// @dev Reverts with a panic code. Recommended to use with
    /// the internal constants with predefined codes.
    function panic(uint256 code) internal pure {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, 0x4e487b71)
            mstore(0x20, code)
            revert(0x1c, 0x24)
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SafeCast.sol)
// This file was procedurally generated from scripts/generate/templates/SafeCast.js.

pragma solidity ^0.8.20;

/**
 * @dev Wrappers over Solidity's uintXX/intXX/bool casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeCast {
    /**
     * @dev Value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedUintDowncast(uint8 bits, uint256 value);

    /**
     * @dev An int value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedIntToUint(int256 value);

    /**
     * @dev Value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedIntDowncast(uint8 bits, int256 value);

    /**
     * @dev An uint value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedUintToInt(uint256 value);

    /**
     * @dev Returns the downcasted uint248 from uint256, reverting on
     * overflow (when the input is greater than largest uint248).
     *
     * Counterpart to Solidity's `uint248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toUint248(uint256 value) internal pure returns (uint248) {
        if (value > type(uint248).max) {
            revert SafeCastOverflowedUintDowncast(248, value);
        }
        return uint248(value);
    }

    /**
     * @dev Returns the downcasted uint240 from uint256, reverting on
     * overflow (when the input is greater than largest uint240).
     *
     * Counterpart to Solidity's `uint240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toUint240(uint256 value) internal pure returns (uint240) {
        if (value > type(uint240).max) {
            revert SafeCastOverflowedUintDowncast(240, value);
        }
        return uint240(value);
    }

    /**
     * @dev Returns the downcasted uint232 from uint256, reverting on
     * overflow (when the input is greater than largest uint232).
     *
     * Counterpart to Solidity's `uint232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toUint232(uint256 value) internal pure returns (uint232) {
        if (value > type(uint232).max) {
            revert SafeCastOverflowedUintDowncast(232, value);
        }
        return uint232(value);
    }

    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        if (value > type(uint224).max) {
            revert SafeCastOverflowedUintDowncast(224, value);
        }
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint216 from uint256, reverting on
     * overflow (when the input is greater than largest uint216).
     *
     * Counterpart to Solidity's `uint216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toUint216(uint256 value) internal pure returns (uint216) {
        if (value > type(uint216).max) {
            revert SafeCastOverflowedUintDowncast(216, value);
        }
        return uint216(value);
    }

    /**
     * @dev Returns the downcasted uint208 from uint256, reverting on
     * overflow (when the input is greater than largest uint208).
     *
     * Counterpart to Solidity's `uint208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toUint208(uint256 value) internal pure returns (uint208) {
        if (value > type(uint208).max) {
            revert SafeCastOverflowedUintDowncast(208, value);
        }
        return uint208(value);
    }

    /**
     * @dev Returns the downcasted uint200 from uint256, reverting on
     * overflow (when the input is greater than largest uint200).
     *
     * Counterpart to Solidity's `uint200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toUint200(uint256 value) internal pure returns (uint200) {
        if (value > type(uint200).max) {
            revert SafeCastOverflowedUintDowncast(200, value);
        }
        return uint200(value);
    }

    /**
     * @dev Returns the downcasted uint192 from uint256, reverting on
     * overflow (when the input is greater than largest uint192).
     *
     * Counterpart to Solidity's `uint192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toUint192(uint256 value) internal pure returns (uint192) {
        if (value > type(uint192).max) {
            revert SafeCastOverflowedUintDowncast(192, value);
        }
        return uint192(value);
    }

    /**
     * @dev Returns the downcasted uint184 from uint256, reverting on
     * overflow (when the input is greater than largest uint184).
     *
     * Counterpart to Solidity's `uint184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toUint184(uint256 value) internal pure returns (uint184) {
        if (value > type(uint184).max) {
            revert SafeCastOverflowedUintDowncast(184, value);
        }
        return uint184(value);
    }

    /**
     * @dev Returns the downcasted uint176 from uint256, reverting on
     * overflow (when the input is greater than largest uint176).
     *
     * Counterpart to Solidity's `uint176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toUint176(uint256 value) internal pure returns (uint176) {
        if (value > type(uint176).max) {
            revert SafeCastOverflowedUintDowncast(176, value);
        }
        return uint176(value);
    }

    /**
     * @dev Returns the downcasted uint168 from uint256, reverting on
     * overflow (when the input is greater than largest uint168).
     *
     * Counterpart to Solidity's `uint168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toUint168(uint256 value) internal pure returns (uint168) {
        if (value > type(uint168).max) {
            revert SafeCastOverflowedUintDowncast(168, value);
        }
        return uint168(value);
    }

    /**
     * @dev Returns the downcasted uint160 from uint256, reverting on
     * overflow (when the input is greater than largest uint160).
     *
     * Counterpart to Solidity's `uint160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toUint160(uint256 value) internal pure returns (uint160) {
        if (value > type(uint160).max) {
            revert SafeCastOverflowedUintDowncast(160, value);
        }
        return uint160(value);
    }

    /**
     * @dev Returns the downcasted uint152 from uint256, reverting on
     * overflow (when the input is greater than largest uint152).
     *
     * Counterpart to Solidity's `uint152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toUint152(uint256 value) internal pure returns (uint152) {
        if (value > type(uint152).max) {
            revert SafeCastOverflowedUintDowncast(152, value);
        }
        return uint152(value);
    }

    /**
     * @dev Returns the downcasted uint144 from uint256, reverting on
     * overflow (when the input is greater than largest uint144).
     *
     * Counterpart to Solidity's `uint144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     */
    function toUint144(uint256 value) internal pure returns (uint144) {
        if (value > type(uint144).max) {
            revert SafeCastOverflowedUintDowncast(144, value);
        }
        return uint144(value);
    }

    /**
     * @dev Returns the downcasted uint136 from uint256, reverting on
     * overflow (when the input is greater than largest uint136).
     *
     * Counterpart to Solidity's `uint136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     */
    function toUint136(uint256 value) internal pure returns (uint136) {
        if (value > type(uint136).max) {
            revert SafeCastOverflowedUintDowncast(136, value);
        }
        return uint136(value);
    }

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        if (value > type(uint128).max) {
            revert SafeCastOverflowedUintDowncast(128, value);
        }
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint120 from uint256, reverting on
     * overflow (when the input is greater than largest uint120).
     *
     * Counterpart to Solidity's `uint120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     */
    function toUint120(uint256 value) internal pure returns (uint120) {
        if (value > type(uint120).max) {
            revert SafeCastOverflowedUintDowncast(120, value);
        }
        return uint120(value);
    }

    /**
     * @dev Returns the downcasted uint112 from uint256, reverting on
     * overflow (when the input is greater than largest uint112).
     *
     * Counterpart to Solidity's `uint112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     */
    function toUint112(uint256 value) internal pure returns (uint112) {
        if (value > type(uint112).max) {
            revert SafeCastOverflowedUintDowncast(112, value);
        }
        return uint112(value);
    }

    /**
     * @dev Returns the downcasted uint104 from uint256, reverting on
     * overflow (when the input is greater than largest uint104).
     *
     * Counterpart to Solidity's `uint104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     */
    function toUint104(uint256 value) internal pure returns (uint104) {
        if (value > type(uint104).max) {
            revert SafeCastOverflowedUintDowncast(104, value);
        }
        return uint104(value);
    }

    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        if (value > type(uint96).max) {
            revert SafeCastOverflowedUintDowncast(96, value);
        }
        return uint96(value);
    }

    /**
     * @dev Returns the downcasted uint88 from uint256, reverting on
     * overflow (when the input is greater than largest uint88).
     *
     * Counterpart to Solidity's `uint88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     */
    function toUint88(uint256 value) internal pure returns (uint88) {
        if (value > type(uint88).max) {
            revert SafeCastOverflowedUintDowncast(88, value);
        }
        return uint88(value);
    }

    /**
     * @dev Returns the downcasted uint80 from uint256, reverting on
     * overflow (when the input is greater than largest uint80).
     *
     * Counterpart to Solidity's `uint80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     */
    function toUint80(uint256 value) internal pure returns (uint80) {
        if (value > type(uint80).max) {
            revert SafeCastOverflowedUintDowncast(80, value);
        }
        return uint80(value);
    }

    /**
     * @dev Returns the downcasted uint72 from uint256, reverting on
     * overflow (when the input is greater than largest uint72).
     *
     * Counterpart to Solidity's `uint72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     */
    function toUint72(uint256 value) internal pure returns (uint72) {
        if (value > type(uint72).max) {
            revert SafeCastOverflowedUintDowncast(72, value);
        }
        return uint72(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        if (value > type(uint64).max) {
            revert SafeCastOverflowedUintDowncast(64, value);
        }
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint56 from uint256, reverting on
     * overflow (when the input is greater than largest uint56).
     *
     * Counterpart to Solidity's `uint56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     */
    function toUint56(uint256 value) internal pure returns (uint56) {
        if (value > type(uint56).max) {
            revert SafeCastOverflowedUintDowncast(56, value);
        }
        return uint56(value);
    }

    /**
     * @dev Returns the downcasted uint48 from uint256, reverting on
     * overflow (when the input is greater than largest uint48).
     *
     * Counterpart to Solidity's `uint48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     */
    function toUint48(uint256 value) internal pure returns (uint48) {
        if (value > type(uint48).max) {
            revert SafeCastOverflowedUintDowncast(48, value);
        }
        return uint48(value);
    }

    /**
     * @dev Returns the downcasted uint40 from uint256, reverting on
     * overflow (when the input is greater than largest uint40).
     *
     * Counterpart to Solidity's `uint40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     */
    function toUint40(uint256 value) internal pure returns (uint40) {
        if (value > type(uint40).max) {
            revert SafeCastOverflowedUintDowncast(40, value);
        }
        return uint40(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        if (value > type(uint32).max) {
            revert SafeCastOverflowedUintDowncast(32, value);
        }
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint24 from uint256, reverting on
     * overflow (when the input is greater than largest uint24).
     *
     * Counterpart to Solidity's `uint24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     */
    function toUint24(uint256 value) internal pure returns (uint24) {
        if (value > type(uint24).max) {
            revert SafeCastOverflowedUintDowncast(24, value);
        }
        return uint24(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        if (value > type(uint16).max) {
            revert SafeCastOverflowedUintDowncast(16, value);
        }
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        if (value > type(uint8).max) {
            revert SafeCastOverflowedUintDowncast(8, value);
        }
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        if (value < 0) {
            revert SafeCastOverflowedIntToUint(value);
        }
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int248 from int256, reverting on
     * overflow (when the input is less than smallest int248 or
     * greater than largest int248).
     *
     * Counterpart to Solidity's `int248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toInt248(int256 value) internal pure returns (int248 downcasted) {
        downcasted = int248(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(248, value);
        }
    }

    /**
     * @dev Returns the downcasted int240 from int256, reverting on
     * overflow (when the input is less than smallest int240 or
     * greater than largest int240).
     *
     * Counterpart to Solidity's `int240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toInt240(int256 value) internal pure returns (int240 downcasted) {
        downcasted = int240(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(240, value);
        }
    }

    /**
     * @dev Returns the downcasted int232 from int256, reverting on
     * overflow (when the input is less than smallest int232 or
     * greater than largest int232).
     *
     * Counterpart to Solidity's `int232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toInt232(int256 value) internal pure returns (int232 downcasted) {
        downcasted = int232(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(232, value);
        }
    }

    /**
     * @dev Returns the downcasted int224 from int256, reverting on
     * overflow (when the input is less than smallest int224 or
     * greater than largest int224).
     *
     * Counterpart to Solidity's `int224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toInt224(int256 value) internal pure returns (int224 downcasted) {
        downcasted = int224(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(224, value);
        }
    }

    /**
     * @dev Returns the downcasted int216 from int256, reverting on
     * overflow (when the input is less than smallest int216 or
     * greater than largest int216).
     *
     * Counterpart to Solidity's `int216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toInt216(int256 value) internal pure returns (int216 downcasted) {
        downcasted = int216(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(216, value);
        }
    }

    /**
     * @dev Returns the downcasted int208 from int256, reverting on
     * overflow (when the input is less than smallest int208 or
     * greater than largest int208).
     *
     * Counterpart to Solidity's `int208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toInt208(int256 value) internal pure returns (int208 downcasted) {
        downcasted = int208(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(208, value);
        }
    }

    /**
     * @dev Returns the downcasted int200 from int256, reverting on
     * overflow (when the input is less than smallest int200 or
     * greater than largest int200).
     *
     * Counterpart to Solidity's `int200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toInt200(int256 value) internal pure returns (int200 downcasted) {
        downcasted = int200(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(200, value);
        }
    }

    /**
     * @dev Returns the downcasted int192 from int256, reverting on
     * overflow (when the input is less than smallest int192 or
     * greater than largest int192).
     *
     * Counterpart to Solidity's `int192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toInt192(int256 value) internal pure returns (int192 downcasted) {
        downcasted = int192(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(192, value);
        }
    }

    /**
     * @dev Returns the downcasted int184 from int256, reverting on
     * overflow (when the input is less than smallest int184 or
     * greater than largest int184).
     *
     * Counterpart to Solidity's `int184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toInt184(int256 value) internal pure returns (int184 downcasted) {
        downcasted = int184(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(184, value);
        }
    }

    /**
     * @dev Returns the downcasted int176 from int256, reverting on
     * overflow (when the input is less than smallest int176 or
     * greater than largest int176).
     *
     * Counterpart to Solidity's `int176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toInt176(int256 value) internal pure returns (int176 downcasted) {
        downcasted = int176(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(176, value);
        }
    }

    /**
     * @dev Returns the downcasted int168 from int256, reverting on
     * overflow (when the input is less than smallest int168 or
     * greater than largest int168).
     *
     * Counterpart to Solidity's `int168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toInt168(int256 value) internal pure returns (int168 downcasted) {
        downcasted = int168(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(168, value);
        }
    }

    /**
     * @dev Returns the downcasted int160 from int256, reverting on
     * overflow (when the input is less than smallest int160 or
     * greater than largest int160).
     *
     * Counterpart to Solidity's `int160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toInt160(int256 value) internal pure returns (int160 downcasted) {
        downcasted = int160(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(160, value);
        }
    }

    /**
     * @dev Returns the downcasted int152 from int256, reverting on
     * overflow (when the input is less than smallest int152 or
     * greater than largest int152).
     *
     * Counterpart to Solidity's `int152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toInt152(int256 value) internal pure returns (int152 downcasted) {
        downcasted = int152(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(152, value);
        }
    }

    /**
     * @dev Returns the downcasted int144 from int256, reverting on
     * overflow (when the input is less than smallest int144 or
     * greater than largest int144).
     *
     * Counterpart to Solidity's `int144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     */
    function toInt144(int256 value) internal pure returns (int144 downcasted) {
        downcasted = int144(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(144, value);
        }
    }

    /**
     * @dev Returns the downcasted int136 from int256, reverting on
     * overflow (when the input is less than smallest int136 or
     * greater than largest int136).
     *
     * Counterpart to Solidity's `int136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     */
    function toInt136(int256 value) internal pure returns (int136 downcasted) {
        downcasted = int136(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(136, value);
        }
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toInt128(int256 value) internal pure returns (int128 downcasted) {
        downcasted = int128(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(128, value);
        }
    }

    /**
     * @dev Returns the downcasted int120 from int256, reverting on
     * overflow (when the input is less than smallest int120 or
     * greater than largest int120).
     *
     * Counterpart to Solidity's `int120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     */
    function toInt120(int256 value) internal pure returns (int120 downcasted) {
        downcasted = int120(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(120, value);
        }
    }

    /**
     * @dev Returns the downcasted int112 from int256, reverting on
     * overflow (when the input is less than smallest int112 or
     * greater than largest int112).
     *
     * Counterpart to Solidity's `int112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     */
    function toInt112(int256 value) internal pure returns (int112 downcasted) {
        downcasted = int112(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(112, value);
        }
    }

    /**
     * @dev Returns the downcasted int104 from int256, reverting on
     * overflow (when the input is less than smallest int104 or
     * greater than largest int104).
     *
     * Counterpart to Solidity's `int104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     */
    function toInt104(int256 value) internal pure returns (int104 downcasted) {
        downcasted = int104(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(104, value);
        }
    }

    /**
     * @dev Returns the downcasted int96 from int256, reverting on
     * overflow (when the input is less than smallest int96 or
     * greater than largest int96).
     *
     * Counterpart to Solidity's `int96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toInt96(int256 value) internal pure returns (int96 downcasted) {
        downcasted = int96(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(96, value);
        }
    }

    /**
     * @dev Returns the downcasted int88 from int256, reverting on
     * overflow (when the input is less than smallest int88 or
     * greater than largest int88).
     *
     * Counterpart to Solidity's `int88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     */
    function toInt88(int256 value) internal pure returns (int88 downcasted) {
        downcasted = int88(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(88, value);
        }
    }

    /**
     * @dev Returns the downcasted int80 from int256, reverting on
     * overflow (when the input is less than smallest int80 or
     * greater than largest int80).
     *
     * Counterpart to Solidity's `int80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     */
    function toInt80(int256 value) internal pure returns (int80 downcasted) {
        downcasted = int80(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(80, value);
        }
    }

    /**
     * @dev Returns the downcasted int72 from int256, reverting on
     * overflow (when the input is less than smallest int72 or
     * greater than largest int72).
     *
     * Counterpart to Solidity's `int72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     */
    function toInt72(int256 value) internal pure returns (int72 downcasted) {
        downcasted = int72(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(72, value);
        }
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toInt64(int256 value) internal pure returns (int64 downcasted) {
        downcasted = int64(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(64, value);
        }
    }

    /**
     * @dev Returns the downcasted int56 from int256, reverting on
     * overflow (when the input is less than smallest int56 or
     * greater than largest int56).
     *
     * Counterpart to Solidity's `int56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     */
    function toInt56(int256 value) internal pure returns (int56 downcasted) {
        downcasted = int56(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(56, value);
        }
    }

    /**
     * @dev Returns the downcasted int48 from int256, reverting on
     * overflow (when the input is less than smallest int48 or
     * greater than largest int48).
     *
     * Counterpart to Solidity's `int48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     */
    function toInt48(int256 value) internal pure returns (int48 downcasted) {
        downcasted = int48(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(48, value);
        }
    }

    /**
     * @dev Returns the downcasted int40 from int256, reverting on
     * overflow (when the input is less than smallest int40 or
     * greater than largest int40).
     *
     * Counterpart to Solidity's `int40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     */
    function toInt40(int256 value) internal pure returns (int40 downcasted) {
        downcasted = int40(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(40, value);
        }
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toInt32(int256 value) internal pure returns (int32 downcasted) {
        downcasted = int32(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(32, value);
        }
    }

    /**
     * @dev Returns the downcasted int24 from int256, reverting on
     * overflow (when the input is less than smallest int24 or
     * greater than largest int24).
     *
     * Counterpart to Solidity's `int24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     */
    function toInt24(int256 value) internal pure returns (int24 downcasted) {
        downcasted = int24(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(24, value);
        }
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toInt16(int256 value) internal pure returns (int16 downcasted) {
        downcasted = int16(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(16, value);
        }
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     */
    function toInt8(int256 value) internal pure returns (int8 downcasted) {
        downcasted = int8(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(8, value);
        }
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        if (value > uint256(type(int256).max)) {
            revert SafeCastOverflowedUintToInt(value);
        }
        return int256(value);
    }

    /**
     * @dev Cast a boolean (false or true) to a uint256 (0 or 1) with no jump.
     */
    function toUint(bool b) internal pure returns (uint256 u) {
        /// @solidity memory-safe-assembly
        assembly {
            u := iszero(iszero(b))
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/beacon/UpgradeableBeacon.sol)

pragma solidity ^0.8.20;

import {IBeacon} from "./IBeacon.sol";
import {Ownable} from "../../access/Ownable.sol";

/**
 * @dev This contract is used in conjunction with one or more instances of {BeaconProxy} to determine their
 * implementation contract, which is where they will delegate all function calls.
 *
 * An owner is able to change the implementation the beacon points to, thus upgrading the proxies that use this beacon.
 */
contract UpgradeableBeacon is IBeacon, Ownable {
    address private _implementation;

    /**
     * @dev The `implementation` of the beacon is invalid.
     */
    error BeaconInvalidImplementation(address implementation);

    /**
     * @dev Emitted when the implementation returned by the beacon is changed.
     */
    event Upgraded(address indexed implementation);

    /**
     * @dev Sets the address of the initial implementation, and the initial owner who can upgrade the beacon.
     */
    constructor(address implementation_, address initialOwner) Ownable(initialOwner) {
        _setImplementation(implementation_);
    }

    /**
     * @dev Returns the current implementation address.
     */
    function implementation() public view virtual returns (address) {
        return _implementation;
    }

    /**
     * @dev Upgrades the beacon to a new implementation.
     *
     * Emits an {Upgraded} event.
     *
     * Requirements:
     *
     * - msg.sender must be the owner of the contract.
     * - `newImplementation` must be a contract.
     */
    function upgradeTo(address newImplementation) public virtual onlyOwner {
        _setImplementation(newImplementation);
    }

    /**
     * @dev Sets the implementation contract address for this beacon
     *
     * Requirements:
     *
     * - `newImplementation` must be a contract.
     */
    function _setImplementation(address newImplementation) private {
        if (newImplementation.code.length == 0) {
            revert BeaconInvalidImplementation(newImplementation);
        }
        _implementation = newImplementation;
        emit Upgraded(newImplementation);
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;

import "./IStrategy.sol";
import "./ISignatureUtils.sol";

/**
 * @title DelegationManager
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 * @notice  This is the contract for delegation in EigenLayer. The main functionalities of this contract are
 * - enabling anyone to register as an operator in EigenLayer
 * - allowing operators to specify parameters related to stakers who delegate to them
 * - enabling any staker to delegate its stake to the operator of its choice (a given staker can only delegate to a single operator at a time)
 * - enabling a staker to undelegate its assets from the operator it is delegated to (performed as part of the withdrawal process, initiated through the StrategyManager)
 */
interface IDelegationManager is ISignatureUtils {
    // @notice Struct used for storing information about a single operator who has registered with EigenLayer
    struct OperatorDetails {
        /// @notice DEPRECATED -- this field is no longer used, payments are handled in PaymentCoordinator.sol
        address __deprecated_earningsReceiver;
        /**
         * @notice Address to verify signatures when a staker wishes to delegate to the operator, as well as controlling "forced undelegations".
         * @dev Signature verification follows these rules:
         * 1) If this address is left as address(0), then any staker will be free to delegate to the operator, i.e. no signature verification will be performed.
         * 2) If this address is an EOA (i.e. it has no code), then we follow standard ECDSA signature verification for delegations to the operator.
         * 3) If this address is a contract (i.e. it has code) then we forward a call to the contract and verify that it returns the correct EIP-1271 "magic value".
         */
        address delegationApprover;
        /**
         * @notice A minimum delay -- measured in blocks -- enforced between:
         * 1) the operator signalling their intent to register for a service, via calling `Slasher.optIntoSlashing`
         * and
         * 2) the operator completing registration for the service, via the service ultimately calling `Slasher.recordFirstStakeUpdate`
         * @dev note that for a specific operator, this value *cannot decrease*, i.e. if the operator wishes to modify their OperatorDetails,
         * then they are only allowed to either increase this value or keep it the same.
         */
        uint32 stakerOptOutWindowBlocks;
    }

    /**
     * @notice Abstract struct used in calculating an EIP712 signature for a staker to approve that they (the staker themselves) delegate to a specific operator.
     * @dev Used in computing the `STAKER_DELEGATION_TYPEHASH` and as a reference in the computation of the stakerDigestHash in the `delegateToBySignature` function.
     */
    struct StakerDelegation {
        // the staker who is delegating
        address staker;
        // the operator being delegated to
        address operator;
        // the staker's nonce
        uint256 nonce;
        // the expiration timestamp (UTC) of the signature
        uint256 expiry;
    }

    /**
     * @notice Abstract struct used in calculating an EIP712 signature for an operator's delegationApprover to approve that a specific staker delegate to the operator.
     * @dev Used in computing the `DELEGATION_APPROVAL_TYPEHASH` and as a reference in the computation of the approverDigestHash in the `_delegate` function.
     */
    struct DelegationApproval {
        // the staker who is delegating
        address staker;
        // the operator being delegated to
        address operator;
        // the operator's provided salt
        bytes32 salt;
        // the expiration timestamp (UTC) of the signature
        uint256 expiry;
    }

    /**
     * Struct type used to specify an existing queued withdrawal. Rather than storing the entire struct, only a hash is stored.
     * In functions that operate on existing queued withdrawals -- e.g. completeQueuedWithdrawal`, the data is resubmitted and the hash of the submitted
     * data is computed by `calculateWithdrawalRoot` and checked against the stored hash in order to confirm the integrity of the submitted data.
     */
    struct Withdrawal {
        // The address that originated the Withdrawal
        address staker;
        // The address that the staker was delegated to at the time that the Withdrawal was created
        address delegatedTo;
        // The address that can complete the Withdrawal + will receive funds when completing the withdrawal
        address withdrawer;
        // Nonce used to guarantee that otherwise identical withdrawals have unique hashes
        uint256 nonce;
        // Block number when the Withdrawal was created
        uint32 startBlock;
        // Array of strategies that the Withdrawal contains
        IStrategy[] strategies;
        // Array containing the amount of shares in each Strategy in the `strategies` array
        uint256[] shares;
    }

    struct QueuedWithdrawalParams {
        // Array of strategies that the QueuedWithdrawal contains
        IStrategy[] strategies;
        // Array containing the amount of shares in each Strategy in the `strategies` array
        uint256[] shares;
        // The address of the withdrawer
        address withdrawer;
    }

    // @notice Emitted when a new operator registers in EigenLayer and provides their OperatorDetails.
    event OperatorRegistered(address indexed operator, OperatorDetails operatorDetails);

    /// @notice Emitted when an operator updates their OperatorDetails to @param newOperatorDetails
    event OperatorDetailsModified(address indexed operator, OperatorDetails newOperatorDetails);

    /**
     * @notice Emitted when @param operator indicates that they are updating their MetadataURI string
     * @dev Note that these strings are *never stored in storage* and are instead purely emitted in events for off-chain indexing
     */
    event OperatorMetadataURIUpdated(address indexed operator, string metadataURI);

    /// @notice Emitted whenever an operator's shares are increased for a given strategy. Note that shares is the delta in the operator's shares.
    event OperatorSharesIncreased(address indexed operator, address staker, IStrategy strategy, uint256 shares);

    /// @notice Emitted whenever an operator's shares are decreased for a given strategy. Note that shares is the delta in the operator's shares.
    event OperatorSharesDecreased(address indexed operator, address staker, IStrategy strategy, uint256 shares);

    /// @notice Emitted when @param staker delegates to @param operator.
    event StakerDelegated(address indexed staker, address indexed operator);

    /// @notice Emitted when @param staker undelegates from @param operator.
    event StakerUndelegated(address indexed staker, address indexed operator);

    /// @notice Emitted when @param staker is undelegated via a call not originating from the staker themself
    event StakerForceUndelegated(address indexed staker, address indexed operator);

    /**
     * @notice Emitted when a new withdrawal is queued.
     * @param withdrawalRoot Is the hash of the `withdrawal`.
     * @param withdrawal Is the withdrawal itself.
     */
    event WithdrawalQueued(bytes32 withdrawalRoot, Withdrawal withdrawal);

    /// @notice Emitted when a queued withdrawal is completed
    event WithdrawalCompleted(bytes32 withdrawalRoot);

    /// @notice Emitted when the `minWithdrawalDelayBlocks` variable is modified from `previousValue` to `newValue`.
    event MinWithdrawalDelayBlocksSet(uint256 previousValue, uint256 newValue);

    /// @notice Emitted when the `strategyWithdrawalDelayBlocks` variable is modified from `previousValue` to `newValue`.
    event StrategyWithdrawalDelayBlocksSet(IStrategy strategy, uint256 previousValue, uint256 newValue);

    /**
     * @notice Registers the caller as an operator in EigenLayer.
     * @param registeringOperatorDetails is the `OperatorDetails` for the operator.
     * @param metadataURI is a URI for the operator's metadata, i.e. a link providing more details on the operator.
     *
     * @dev Once an operator is registered, they cannot 'deregister' as an operator, and they will forever be considered "delegated to themself".
     * @dev Note that the `metadataURI` is *never stored * and is only emitted in the `OperatorMetadataURIUpdated` event
     */
    function registerAsOperator(
        OperatorDetails calldata registeringOperatorDetails,
        string calldata metadataURI
    ) external;

    /**
     * @notice Updates an operator's stored `OperatorDetails`.
     * @param newOperatorDetails is the updated `OperatorDetails` for the operator, to replace their current OperatorDetails`.
     *
     * @dev The caller must have previously registered as an operator in EigenLayer.
     */
    function modifyOperatorDetails(OperatorDetails calldata newOperatorDetails) external;

    /**
     * @notice Called by an operator to emit an `OperatorMetadataURIUpdated` event indicating the information has updated.
     * @param metadataURI The URI for metadata associated with an operator
     * @dev Note that the `metadataURI` is *never stored * and is only emitted in the `OperatorMetadataURIUpdated` event
     */
    function updateOperatorMetadataURI(string calldata metadataURI) external;

    /**
     * @notice Caller delegates their stake to an operator.
     * @param operator The account (`msg.sender`) is delegating its assets to for use in serving applications built on EigenLayer.
     * @param approverSignatureAndExpiry Verifies the operator approves of this delegation
     * @param approverSalt A unique single use value tied to an individual signature.
     * @dev The approverSignatureAndExpiry is used in the event that:
     *          1) the operator's `delegationApprover` address is set to a non-zero value.
     *                  AND
     *          2) neither the operator nor their `delegationApprover` is the `msg.sender`, since in the event that the operator
     *             or their delegationApprover is the `msg.sender`, then approval is assumed.
     * @dev In the event that `approverSignatureAndExpiry` is not checked, its content is ignored entirely; it's recommended to use an empty input
     * in this case to save on complexity + gas costs
     */
    function delegateTo(
        address operator,
        SignatureWithExpiry memory approverSignatureAndExpiry,
        bytes32 approverSalt
    ) external;

    /**
     * @notice Caller delegates a staker's stake to an operator with valid signatures from both parties.
     * @param staker The account delegating stake to an `operator` account
     * @param operator The account (`staker`) is delegating its assets to for use in serving applications built on EigenLayer.
     * @param stakerSignatureAndExpiry Signed data from the staker authorizing delegating stake to an operator
     * @param approverSignatureAndExpiry is a parameter that will be used for verifying that the operator approves of this delegation action in the event that:
     * @param approverSalt Is a salt used to help guarantee signature uniqueness. Each salt can only be used once by a given approver.
     *
     * @dev If `staker` is an EOA, then `stakerSignature` is verified to be a valid ECDSA stakerSignature from `staker`, indicating their intention for this action.
     * @dev If `staker` is a contract, then `stakerSignature` will be checked according to EIP-1271.
     * @dev the operator's `delegationApprover` address is set to a non-zero value.
     * @dev neither the operator nor their `delegationApprover` is the `msg.sender`, since in the event that the operator or their delegationApprover
     * is the `msg.sender`, then approval is assumed.
     * @dev This function will revert if the current `block.timestamp` is equal to or exceeds the expiry
     * @dev In the case that `approverSignatureAndExpiry` is not checked, its content is ignored entirely; it's recommended to use an empty input
     * in this case to save on complexity + gas costs
     */
    function delegateToBySignature(
        address staker,
        address operator,
        SignatureWithExpiry memory stakerSignatureAndExpiry,
        SignatureWithExpiry memory approverSignatureAndExpiry,
        bytes32 approverSalt
    ) external;

    /**
     * @notice Undelegates the staker from the operator who they are delegated to. Puts the staker into the "undelegation limbo" mode of the EigenPodManager
     * and queues a withdrawal of all of the staker's shares in the StrategyManager (to the staker), if necessary.
     * @param staker The account to be undelegated.
     * @return withdrawalRoot The root of the newly queued withdrawal, if a withdrawal was queued. Otherwise just bytes32(0).
     *
     * @dev Reverts if the `staker` is also an operator, since operators are not allowed to undelegate from themselves.
     * @dev Reverts if the caller is not the staker, nor the operator who the staker is delegated to, nor the operator's specified "delegationApprover"
     * @dev Reverts if the `staker` is already undelegated.
     */
    function undelegate(address staker) external returns (bytes32[] memory withdrawalRoot);

    /**
     * Allows a staker to withdraw some shares. Withdrawn shares/strategies are immediately removed
     * from the staker. If the staker is delegated, withdrawn shares/strategies are also removed from
     * their operator.
     *
     * All withdrawn shares/strategies are placed in a queue and can be fully withdrawn after a delay.
     */
    function queueWithdrawals(QueuedWithdrawalParams[] calldata queuedWithdrawalParams)
        external
        returns (bytes32[] memory);

    /**
     * @notice Used to complete the specified `withdrawal`. The caller must match `withdrawal.withdrawer`
     * @param withdrawal The Withdrawal to complete.
     * @param tokens Array in which the i-th entry specifies the `token` input to the 'withdraw' function of the i-th Strategy in the `withdrawal.strategies` array.
     * This input can be provided with zero length if `receiveAsTokens` is set to 'false' (since in that case, this input will be unused)
     * @param middlewareTimesIndex is the index in the operator that the staker who triggered the withdrawal was delegated to's middleware times array
     * @param receiveAsTokens If true, the shares specified in the withdrawal will be withdrawn from the specified strategies themselves
     * and sent to the caller, through calls to `withdrawal.strategies[i].withdraw`. If false, then the shares in the specified strategies
     * will simply be transferred to the caller directly.
     * @dev middlewareTimesIndex should be calculated off chain before calling this function by finding the first index that satisfies `slasher.canWithdraw`
     * @dev beaconChainETHStrategy shares are non-transferrable, so if `receiveAsTokens = false` and `withdrawal.withdrawer != withdrawal.staker`, note that
     * any beaconChainETHStrategy shares in the `withdrawal` will be _returned to the staker_, rather than transferred to the withdrawer, unlike shares in
     * any other strategies, which will be transferred to the withdrawer.
     */
    function completeQueuedWithdrawal(
        Withdrawal calldata withdrawal,
        IERC20[] calldata tokens,
        uint256 middlewareTimesIndex,
        bool receiveAsTokens
    ) external;

    /**
     * @notice Array-ified version of `completeQueuedWithdrawal`.
     * Used to complete the specified `withdrawals`. The function caller must match `withdrawals[...].withdrawer`
     * @param withdrawals The Withdrawals to complete.
     * @param tokens Array of tokens for each Withdrawal. See `completeQueuedWithdrawal` for the usage of a single array.
     * @param middlewareTimesIndexes One index to reference per Withdrawal. See `completeQueuedWithdrawal` for the usage of a single index.
     * @param receiveAsTokens Whether or not to complete each withdrawal as tokens. See `completeQueuedWithdrawal` for the usage of a single boolean.
     * @dev See `completeQueuedWithdrawal` for relevant dev tags
     */
    function completeQueuedWithdrawals(
        Withdrawal[] calldata withdrawals,
        IERC20[][] calldata tokens,
        uint256[] calldata middlewareTimesIndexes,
        bool[] calldata receiveAsTokens
    ) external;

    /**
     * @notice Increases a staker's delegated share balance in a strategy.
     * @param staker The address to increase the delegated shares for their operator.
     * @param strategy The strategy in which to increase the delegated shares.
     * @param shares The number of shares to increase.
     *
     * @dev *If the staker is actively delegated*, then increases the `staker`'s delegated shares in `strategy` by `shares`. Otherwise does nothing.
     * @dev Callable only by the StrategyManager or EigenPodManager.
     */
    function increaseDelegatedShares(address staker, IStrategy strategy, uint256 shares) external;

    /**
     * @notice Decreases a staker's delegated share balance in a strategy.
     * @param staker The address to increase the delegated shares for their operator.
     * @param strategy The strategy in which to decrease the delegated shares.
     * @param shares The number of shares to decrease.
     *
     * @dev *If the staker is actively delegated*, then decreases the `staker`'s delegated shares in `strategy` by `shares`. Otherwise does nothing.
     * @dev Callable only by the StrategyManager or EigenPodManager.
     */
    function decreaseDelegatedShares(address staker, IStrategy strategy, uint256 shares) external;

    /**
     * @notice returns the address of the operator that `staker` is delegated to.
     * @notice Mapping: staker => operator whom the staker is currently delegated to.
     * @dev Note that returning address(0) indicates that the staker is not actively delegated to any operator.
     */
    function delegatedTo(address staker) external view returns (address);

    /**
     * @notice Returns the OperatorDetails struct associated with an `operator`.
     */
    function operatorDetails(address operator) external view returns (OperatorDetails memory);

    /**
     * @notice Returns the delegationApprover account for an operator
     */
    function delegationApprover(address operator) external view returns (address);

    /**
     * @notice Returns the stakerOptOutWindowBlocks for an operator
     */
    function stakerOptOutWindowBlocks(address operator) external view returns (uint256);

    /**
     * @notice Given array of strategies, returns array of shares for the operator
     */
    function getOperatorShares(
        address operator,
        IStrategy[] memory strategies
    ) external view returns (uint256[] memory);

    /**
     * @notice Given a list of strategies, return the minimum number of blocks that must pass to withdraw
     * from all the inputted strategies. Return value is >= minWithdrawalDelayBlocks as this is the global min withdrawal delay.
     * @param strategies The strategies to check withdrawal delays for
     */
    function getWithdrawalDelay(IStrategy[] calldata strategies) external view returns (uint256);

    /**
     * @notice returns the total number of shares in `strategy` that are delegated to `operator`.
     * @notice Mapping: operator => strategy => total number of shares in the strategy delegated to the operator.
     * @dev By design, the following invariant should hold for each Strategy:
     * (operator's shares in delegation manager) = sum (shares above zero of all stakers delegated to operator)
     * = sum (delegateable shares of all stakers delegated to the operator)
     */
    function operatorShares(address operator, IStrategy strategy) external view returns (uint256);

    /**
     * @notice Returns 'true' if `staker` *is* actively delegated, and 'false' otherwise.
     */
    function isDelegated(address staker) external view returns (bool);

    /**
     * @notice Returns true is an operator has previously registered for delegation.
     */
    function isOperator(address operator) external view returns (bool);

    /// @notice Mapping: staker => number of signed delegation nonces (used in `delegateToBySignature`) from the staker that the contract has already checked
    function stakerNonce(address staker) external view returns (uint256);

    /**
     * @notice Mapping: delegationApprover => 32-byte salt => whether or not the salt has already been used by the delegationApprover.
     * @dev Salts are used in the `delegateTo` and `delegateToBySignature` functions. Note that these functions only process the delegationApprover's
     * signature + the provided salt if the operator being delegated to has specified a nonzero address as their `delegationApprover`.
     */
    function delegationApproverSaltIsSpent(address _delegationApprover, bytes32 salt) external view returns (bool);

    /**
     * @notice Minimum delay enforced by this contract for completing queued withdrawals. Measured in blocks, and adjustable by this contract's owner,
     * up to a maximum of `MAX_WITHDRAWAL_DELAY_BLOCKS`. Minimum value is 0 (i.e. no delay enforced).
     * Note that strategies each have a separate withdrawal delay, which can be greater than this value. So the minimum number of blocks that must pass
     * to withdraw a strategy is MAX(minWithdrawalDelayBlocks, strategyWithdrawalDelayBlocks[strategy])
     */
    function minWithdrawalDelayBlocks() external view returns (uint256);

    /**
     * @notice Minimum delay enforced by this contract per Strategy for completing queued withdrawals. Measured in blocks, and adjustable by this contract's owner,
     * up to a maximum of `MAX_WITHDRAWAL_DELAY_BLOCKS`. Minimum value is 0 (i.e. no delay enforced).
     */
    function strategyWithdrawalDelayBlocks(IStrategy strategy) external view returns (uint256);

    /// @notice return address of the beaconChainETHStrategy
    function beaconChainETHStrategy() external view returns (IStrategy);

    /**
     * @notice Calculates the digestHash for a `staker` to sign to delegate to an `operator`
     * @param staker The signing staker
     * @param operator The operator who is being delegated to
     * @param expiry The desired expiry time of the staker's signature
     */
    function calculateCurrentStakerDelegationDigestHash(
        address staker,
        address operator,
        uint256 expiry
    ) external view returns (bytes32);

    /**
     * @notice Calculates the digest hash to be signed and used in the `delegateToBySignature` function
     * @param staker The signing staker
     * @param _stakerNonce The nonce of the staker. In practice we use the staker's current nonce, stored at `stakerNonce[staker]`
     * @param operator The operator who is being delegated to
     * @param expiry The desired expiry time of the staker's signature
     */
    function calculateStakerDelegationDigestHash(
        address staker,
        uint256 _stakerNonce,
        address operator,
        uint256 expiry
    ) external view returns (bytes32);

    /**
     * @notice Calculates the digest hash to be signed by the operator's delegationApprove and used in the `delegateTo` and `delegateToBySignature` functions.
     * @param staker The account delegating their stake
     * @param operator The account receiving delegated stake
     * @param _delegationApprover the operator's `delegationApprover` who will be signing the delegationHash (in general)
     * @param approverSalt A unique and single use value associated with the approver signature.
     * @param expiry Time after which the approver's signature becomes invalid
     */
    function calculateDelegationApprovalDigestHash(
        address staker,
        address operator,
        address _delegationApprover,
        bytes32 approverSalt,
        uint256 expiry
    ) external view returns (bytes32);

    /// @notice The EIP-712 typehash for the contract's domain
    function DOMAIN_TYPEHASH() external view returns (bytes32);

    /// @notice The EIP-712 typehash for the StakerDelegation struct used by the contract
    function STAKER_DELEGATION_TYPEHASH() external view returns (bytes32);

    /// @notice The EIP-712 typehash for the DelegationApproval struct used by the contract
    function DELEGATION_APPROVAL_TYPEHASH() external view returns (bytes32);

    /**
     * @notice Getter function for the current EIP-712 domain separator for this contract.
     *
     * @dev The domain separator will change in the event of a fork that changes the ChainID.
     * @dev By introducing a domain separator the DApp developers are guaranteed that there can be no signature collision.
     * for more detailed information please read EIP-712.
     */
    function domainSeparator() external view returns (bytes32);

    /// @notice Mapping: staker => cumulative number of queued withdrawals they have ever initiated.
    /// @dev This only increments (doesn't decrement), and is used to help ensure that otherwise identical withdrawals have unique hashes.
    function cumulativeWithdrawalsQueued(address staker) external view returns (uint256);

    /// @notice Returns the keccak256 hash of `withdrawal`.
    function calculateWithdrawalRoot(Withdrawal memory withdrawal) external pure returns (bytes32);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;

import "./IStrategy.sol";
import "./ISlasher.sol";
import "./IDelegationManager.sol";
import "./IEigenPodManager.sol";

/**
 * @title Interface for the primary entrypoint for funds into EigenLayer.
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 * @notice See the `StrategyManager` contract itself for implementation details.
 */
interface IStrategyManager {
    /**
     * @notice Emitted when a new deposit occurs on behalf of `staker`.
     * @param staker Is the staker who is depositing funds into EigenLayer.
     * @param strategy Is the strategy that `staker` has deposited into.
     * @param token Is the token that `staker` deposited.
     * @param shares Is the number of new shares `staker` has been granted in `strategy`.
     */
    event Deposit(address staker, IERC20 token, IStrategy strategy, uint256 shares);

    /// @notice Emitted when `thirdPartyTransfersForbidden` is updated for a strategy and value by the owner
    event UpdatedThirdPartyTransfersForbidden(IStrategy strategy, bool value);

    /// @notice Emitted when the `strategyWhitelister` is changed
    event StrategyWhitelisterChanged(address previousAddress, address newAddress);

    /// @notice Emitted when a strategy is added to the approved list of strategies for deposit
    event StrategyAddedToDepositWhitelist(IStrategy strategy);

    /// @notice Emitted when a strategy is removed from the approved list of strategies for deposit
    event StrategyRemovedFromDepositWhitelist(IStrategy strategy);

    /**
     * @notice Deposits `amount` of `token` into the specified `strategy`, with the resultant shares credited to `msg.sender`
     * @param strategy is the specified strategy where deposit is to be made,
     * @param token is the denomination in which the deposit is to be made,
     * @param amount is the amount of token to be deposited in the strategy by the staker
     * @return shares The amount of new shares in the `strategy` created as part of the action.
     * @dev The `msg.sender` must have previously approved this contract to transfer at least `amount` of `token` on their behalf.
     * @dev Cannot be called by an address that is 'frozen' (this function will revert if the `msg.sender` is frozen).
     *
     * WARNING: Depositing tokens that allow reentrancy (eg. ERC-777) into a strategy is not recommended.  This can lead to attack vectors
     *          where the token balance and corresponding strategy shares are not in sync upon reentrancy.
     */
    function depositIntoStrategy(IStrategy strategy, IERC20 token, uint256 amount) external returns (uint256 shares);

    /**
     * @notice Used for depositing an asset into the specified strategy with the resultant shares credited to `staker`,
     * who must sign off on the action.
     * Note that the assets are transferred out/from the `msg.sender`, not from the `staker`; this function is explicitly designed
     * purely to help one address deposit 'for' another.
     * @param strategy is the specified strategy where deposit is to be made,
     * @param token is the denomination in which the deposit is to be made,
     * @param amount is the amount of token to be deposited in the strategy by the staker
     * @param staker the staker that the deposited assets will be credited to
     * @param expiry the timestamp at which the signature expires
     * @param signature is a valid signature from the `staker`. either an ECDSA signature if the `staker` is an EOA, or data to forward
     * following EIP-1271 if the `staker` is a contract
     * @return shares The amount of new shares in the `strategy` created as part of the action.
     * @dev The `msg.sender` must have previously approved this contract to transfer at least `amount` of `token` on their behalf.
     * @dev A signature is required for this function to eliminate the possibility of griefing attacks, specifically those
     * targeting stakers who may be attempting to undelegate.
     * @dev Cannot be called if thirdPartyTransfersForbidden is set to true for this strategy
     *
     *  WARNING: Depositing tokens that allow reentrancy (eg. ERC-777) into a strategy is not recommended.  This can lead to attack vectors
     *          where the token balance and corresponding strategy shares are not in sync upon reentrancy
     */
    function depositIntoStrategyWithSignature(
        IStrategy strategy,
        IERC20 token,
        uint256 amount,
        address staker,
        uint256 expiry,
        bytes memory signature
    ) external returns (uint256 shares);

    /// @notice Used by the DelegationManager to remove a Staker's shares from a particular strategy when entering the withdrawal queue
    function removeShares(address staker, IStrategy strategy, uint256 shares) external;

    /// @notice Used by the DelegationManager to award a Staker some shares that have passed through the withdrawal queue
    function addShares(address staker, IERC20 token, IStrategy strategy, uint256 shares) external;

    /// @notice Used by the DelegationManager to convert withdrawn shares to tokens and send them to a recipient
    function withdrawSharesAsTokens(address recipient, IStrategy strategy, uint256 shares, IERC20 token) external;

    /// @notice Returns the current shares of `user` in `strategy`
    function stakerStrategyShares(address user, IStrategy strategy) external view returns (uint256 shares);

    /**
     * @notice Get all details on the staker's deposits and corresponding shares
     * @return (staker's strategies, shares in these strategies)
     */
    function getDeposits(address staker) external view returns (IStrategy[] memory, uint256[] memory);

    /// @notice Simple getter function that returns `stakerStrategyList[staker].length`.
    function stakerStrategyListLength(address staker) external view returns (uint256);

    /**
     * @notice Owner-only function that adds the provided Strategies to the 'whitelist' of strategies that stakers can deposit into
     * @param strategiesToWhitelist Strategies that will be added to the `strategyIsWhitelistedForDeposit` mapping (if they aren't in it already)
     * @param thirdPartyTransfersForbiddenValues bool values to set `thirdPartyTransfersForbidden` to for each strategy
     */
    function addStrategiesToDepositWhitelist(
        IStrategy[] calldata strategiesToWhitelist,
        bool[] calldata thirdPartyTransfersForbiddenValues
    ) external;

    /**
     * @notice Owner-only function that removes the provided Strategies from the 'whitelist' of strategies that stakers can deposit into
     * @param strategiesToRemoveFromWhitelist Strategies that will be removed to the `strategyIsWhitelistedForDeposit` mapping (if they are in it)
     */
    function removeStrategiesFromDepositWhitelist(IStrategy[] calldata strategiesToRemoveFromWhitelist) external;

    /**
     * If true for a strategy, a user cannot depositIntoStrategyWithSignature into that strategy for another staker
     * and also when performing DelegationManager.queueWithdrawals, a staker can only withdraw to themselves.
     * Defaulted to false for all existing strategies.
     * @param strategy The strategy to set `thirdPartyTransfersForbidden` value to
     * @param value bool value to set `thirdPartyTransfersForbidden` to
     */
    function setThirdPartyTransfersForbidden(IStrategy strategy, bool value) external;

    /// @notice Returns the single, central Delegation contract of EigenLayer
    function delegation() external view returns (IDelegationManager);

    /// @notice Returns the single, central Slasher contract of EigenLayer
    function slasher() external view returns (ISlasher);

    /// @notice Returns the EigenPodManager contract of EigenLayer
    function eigenPodManager() external view returns (IEigenPodManager);

    /// @notice Returns the address of the `strategyWhitelister`
    function strategyWhitelister() external view returns (address);

    /// @notice Returns bool for whether or not `strategy` is whitelisted for deposit
    function strategyIsWhitelistedForDeposit(IStrategy strategy) external view returns (bool);

    /**
     * @notice Returns bool for whether or not `strategy` enables credit transfers. i.e enabling
     * depositIntoStrategyWithSignature calls or queueing withdrawals to a different address than the staker.
     */
    function thirdPartyTransfersForbidden(IStrategy strategy) external view returns (bool);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;

import "@openzeppelin/contracts/proxy/beacon/IBeacon.sol";
import "./IETHPOSDeposit.sol";
import "./IStrategyManager.sol";
import "./IEigenPod.sol";
import "./IPausable.sol";
import "./ISlasher.sol";
import "./IStrategy.sol";

/**
 * @title Interface for factory that creates and manages solo staking pods that have their withdrawal credentials pointed to EigenLayer.
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 */
interface IEigenPodManager is IPausable {
    /// @notice Emitted to notify the deployment of an EigenPod
    event PodDeployed(address indexed eigenPod, address indexed podOwner);

    /// @notice Emitted to notify a deposit of beacon chain ETH recorded in the strategy manager
    event BeaconChainETHDeposited(address indexed podOwner, uint256 amount);

    /// @notice Emitted when the balance of an EigenPod is updated
    event PodSharesUpdated(address indexed podOwner, int256 sharesDelta);

    /// @notice Emitted every time the total shares of a pod are updated
    event NewTotalShares(address indexed podOwner, int256 newTotalShares);

    /// @notice Emitted when a withdrawal of beacon chain ETH is completed
    event BeaconChainETHWithdrawalCompleted(
        address indexed podOwner,
        uint256 shares,
        uint96 nonce,
        address delegatedAddress,
        address withdrawer,
        bytes32 withdrawalRoot
    );

    /**
     * @notice Creates an EigenPod for the sender.
     * @dev Function will revert if the `msg.sender` already has an EigenPod.
     * @dev Returns EigenPod address
     */
    function createPod() external returns (address);

    /**
     * @notice Stakes for a new beacon chain validator on the sender's EigenPod.
     * Also creates an EigenPod for the sender if they don't have one already.
     * @param pubkey The 48 bytes public key of the beacon chain validator.
     * @param signature The validator's signature of the deposit data.
     * @param depositDataRoot The root/hash of the deposit data for the validator's deposit.
     */
    function stake(bytes calldata pubkey, bytes calldata signature, bytes32 depositDataRoot) external payable;

    /**
     * @notice Changes the `podOwner`'s shares by `sharesDelta` and performs a call to the DelegationManager
     * to ensure that delegated shares are also tracked correctly
     * @param podOwner is the pod owner whose balance is being updated.
     * @param sharesDelta is the change in podOwner's beaconChainETHStrategy shares
     * @dev Callable only by the podOwner's EigenPod contract.
     * @dev Reverts if `sharesDelta` is not a whole Gwei amount
     */
    function recordBeaconChainETHBalanceUpdate(address podOwner, int256 sharesDelta) external;

    /// @notice Returns the address of the `podOwner`'s EigenPod if it has been deployed.
    function ownerToPod(address podOwner) external view returns (IEigenPod);

    /// @notice Returns the address of the `podOwner`'s EigenPod (whether it is deployed yet or not).
    function getPod(address podOwner) external view returns (IEigenPod);

    /// @notice The ETH2 Deposit Contract
    function ethPOS() external view returns (IETHPOSDeposit);

    /// @notice Beacon proxy to which the EigenPods point
    function eigenPodBeacon() external view returns (IBeacon);

    /// @notice EigenLayer's StrategyManager contract
    function strategyManager() external view returns (IStrategyManager);

    /// @notice EigenLayer's Slasher contract
    function slasher() external view returns (ISlasher);

    /// @notice Returns 'true' if the `podOwner` has created an EigenPod, and 'false' otherwise.
    function hasPod(address podOwner) external view returns (bool);

    /// @notice Returns the number of EigenPods that have been created
    function numPods() external view returns (uint256);

    /**
     * @notice Mapping from Pod owner owner to the number of shares they have in the virtual beacon chain ETH strategy.
     * @dev The share amount can become negative. This is necessary to accommodate the fact that a pod owner's virtual beacon chain ETH shares can
     * decrease between the pod owner queuing and completing a withdrawal.
     * When the pod owner's shares would otherwise increase, this "deficit" is decreased first _instead_.
     * Likewise, when a withdrawal is completed, this "deficit" is decreased and the withdrawal amount is decreased; We can think of this
     * as the withdrawal "paying off the deficit".
     */
    function podOwnerShares(address podOwner) external view returns (int256);

    /// @notice returns canonical, virtual beaconChainETH strategy
    function beaconChainETHStrategy() external view returns (IStrategy);

    /**
     * @notice Used by the DelegationManager to remove a pod owner's shares while they're in the withdrawal queue.
     * Simply decreases the `podOwner`'s shares by `shares`, down to a minimum of zero.
     * @dev This function reverts if it would result in `podOwnerShares[podOwner]` being less than zero, i.e. it is forbidden for this function to
     * result in the `podOwner` incurring a "share deficit". This behavior prevents a Staker from queuing a withdrawal which improperly removes excessive
     * shares from the operator to whom the staker is delegated.
     * @dev Reverts if `shares` is not a whole Gwei amount
     */
    function removeShares(address podOwner, uint256 shares) external;

    /**
     * @notice Increases the `podOwner`'s shares by `shares`, paying off deficit if possible.
     * Used by the DelegationManager to award a pod owner shares on exiting the withdrawal queue
     * @dev Returns the number of shares added to `podOwnerShares[podOwner]` above zero, which will be less than the `shares` input
     * in the event that the podOwner has an existing shares deficit (i.e. `podOwnerShares[podOwner]` starts below zero)
     * @dev Reverts if `shares` is not a whole Gwei amount
     */
    function addShares(address podOwner, uint256 shares) external returns (uint256);

    /**
     * @notice Used by the DelegationManager to complete a withdrawal, sending tokens to some destination address
     * @dev Prioritizes decreasing the podOwner's share deficit, if they have one
     * @dev Reverts if `shares` is not a whole Gwei amount
     */
    function withdrawSharesAsTokens(address podOwner, address destination, uint256 shares) external;
}

// SPDX-License-Identifier: BSD 3-Clause License
pragma solidity ^0.8.24;

import {BeaconChainProofs} from "lib/eigenlayer-contracts/src/contracts/libraries/BeaconChainProofs.sol";
import {IStakingNodesManager} from "src/interfaces/IStakingNodesManager.sol";
import {IStrategy} from "lib/eigenlayer-contracts/src/contracts/interfaces/IStrategyManager.sol";
import {IEigenPod} from "lib/eigenlayer-contracts/src/contracts/interfaces/IEigenPod.sol";
import {ISignatureUtils} from "lib/eigenlayer-contracts/src/contracts/interfaces/ISignatureUtils.sol";
import {IDelegationManager} from "lib/eigenlayer-contracts/src/contracts/interfaces/IDelegationManager.sol";

struct WithdrawalCompletionParams {
    uint256 middlewareTimesIndex;
    uint256 amount;
    uint32 withdrawalStartBlock;
    address delegatedAddress;
    uint96 nonce;
}

interface IStakingEvents {
    /// @notice Emitted when a user stakes ETH and receives ynETH.
    /// @param staker The address of the user staking ETH.
    /// @param ethAmount The amount of ETH staked.
    /// @param ynETHAmount The amount of ynETH received.
    event Staked(address indexed staker, uint256 ethAmount, uint256 ynETHAmount);
    event DepositETHPausedUpdated(bool isPaused);
    event Deposit(address indexed sender, address indexed receiver, uint256 assets, uint256 shares);
}

interface IStakingNode {

    /// @notice Configuration for contract initialization.
    struct Init {
        IStakingNodesManager stakingNodesManager;
        uint256 nodeId;
    }

    function stakingNodesManager() external view returns (IStakingNodesManager);
    function eigenPod() external view returns (IEigenPod);
    function initialize(Init memory init) external;
    function createEigenPod() external returns (IEigenPod);
    function delegate(
        address operator,
        ISignatureUtils.SignatureWithExpiry memory approverSignatureAndExpiry,
        bytes32 approverSalt
    ) external;
    function undelegate() external;

    function implementation() external view returns (address);

    function allocateStakedETH(uint256 amount) external payable;   
    function deallocateStakedETH(uint256 amount) external payable;
    function getETHBalance() external view returns (uint256);
    function unverifiedStakedETH() external view returns (uint256);
    function nodeId() external view returns (uint256);

    /// @notice Returns the beaconChainETHStrategy address used by the StakingNode.
    function beaconChainETHStrategy() external view returns (IStrategy);

    /**
     * @notice Verifies the withdrawal credentials and balance of validators.
     * @param beaconTimestamp An array of oracle block numbers corresponding to each validator.
     * @param stateRootProof An array of state root proofs corresponding to each validator.
     * @param validatorIndices An array of validator indices.
     * @param validatorFieldsProofs An array of ValidatorFieldsAndBalanceProofs, containing the merkle proofs for validator fields and balances.
     * @param validatorFields An array of arrays, each containing the validator fields to be verified.
     */
    function verifyWithdrawalCredentials(
        uint64 beaconTimestamp,
        BeaconChainProofs.StateRootProof calldata stateRootProof,
        uint40[] calldata validatorIndices,
        bytes[] calldata validatorFieldsProofs,
        bytes32[][] calldata validatorFields
    ) external;

    function queueWithdrawals(
        uint256 sharesAmount
    ) external returns (bytes32[] memory fullWithdrawalRoots);

    function completeQueuedWithdrawals(
        IDelegationManager.Withdrawal[] memory withdrawals,
        uint256[] memory middlewareTimesIndexes
     ) external;

    function getInitializedVersion() external view returns (uint64);

    function getUnverifiedStakedETH() external view returns (uint256);
    function getQueuedSharesAmount() external view returns (uint256);
    function getWithdrawnETH() external view returns (uint256);
    function startCheckpoint(bool revertIfNoBalance) external;
    function initializeV2(uint256 initialUnverifiedStakedETH) external;
}

// SPDX-License-Identifier: BSD 3-Clause License
pragma solidity ^0.8.24;

import "lib/openzeppelin-contracts/contracts/token/ERC20/extensions/IERC20Metadata.sol";

interface IRedemptionAssetsVault {

    // Events
    event AssetsDeposited( address indexed asset, address indexed depositor, uint256 amount);
    event AssetTransferred(address indexed asset, address indexed redeemer, address indexed to, uint256 amount);
    event AssetWithdrawn(address indexed asset, address indexed redeemer, address indexed to, uint256 amount);

    /// @notice Transfers redemption assets to a specified address based on redemption.
    /// @dev This is only for INTERNAL USE
    /// @param to The address to which the assets will be transferred.
    /// @param amount The amount in unit of account
    /// @param data Extra data payload for redemption request
    function transferRedemptionAssets(address to, uint256 amount, bytes calldata data) external;

    /// @notice Withdraws redemption assets from the queue's balance
    /// @param amount The amount in unit of account
    function withdrawRedemptionAssets(uint256 amount) external;

    /// @notice Retrieves the current redemption rate for the asset in the unit of account.
    /// @return The current redemption rate
    function redemptionRate() external view returns (uint256);

    /// @notice Gets the total amount of redemption assets available for withdrawal in the unit of account.
    /// @return The available amount of redemption assets
    function availableRedemptionAssets() external view returns (uint256);
}

// SPDX-License-Identifier: BSD 3-Clause License
pragma solidity ^0.8.24;

import {IERC20} from "lib/openzeppelin-contracts/contracts/interfaces/IERC20.sol";

interface IRewardsReceiver {
    /// @notice Configuration for contract initialization.
    struct Init {
        address admin;
        address withdrawer;
    }

    /// @notice Initializes the contract.
    /// @dev MUST be called during the contract upgrade to set up the proxies state.
    function initialize(Init memory init) external;

    /// @notice Transfers the given amount of ETH to an address.
    /// @dev Only callable by the withdrawer.
    function transferETH(address payable to, uint256 amount) external;

    /// @notice Transfers the given amount of an ERC20 token to an address.
    /// @dev Only callable by the withdrawer.
    function transferERC20(IERC20 token, address to, uint256 amount) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC-20 standard as defined in the ERC.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: BSD 3-Clause License
pragma solidity ^0.8.24;

import "lib/openzeppelin-contracts/contracts/token/ERC20/extensions/IERC20Metadata.sol";

interface IRedeemableAsset is IERC20Metadata {
    function burn(uint256 amount) external;
    function processWithdrawnETH() external payable;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {IERC20Metadata} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import {ContextUpgradeable} from "../../utils/ContextUpgradeable.sol";
import {IERC20Errors} from "@openzeppelin/contracts/interfaces/draft-IERC6093.sol";
import {Initializable} from "../../proxy/utils/Initializable.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC-20
 * applications.
 */
abstract contract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20, IERC20Metadata, IERC20Errors {
    /// @custom:storage-location erc7201:openzeppelin.storage.ERC20
    struct ERC20Storage {
        mapping(address account => uint256) _balances;

        mapping(address account => mapping(address spender => uint256)) _allowances;

        uint256 _totalSupply;

        string _name;
        string _symbol;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.ERC20")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant ERC20StorageLocation = 0x52c63247e1f47db19d5ce0460030c497f067ca4cebf71ba98eeadabe20bace00;

    function _getERC20Storage() private pure returns (ERC20Storage storage $) {
        assembly {
            $.slot := ERC20StorageLocation
        }
    }

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    function __ERC20_init(string memory name_, string memory symbol_) internal onlyInitializing {
        __ERC20_init_unchained(name_, symbol_);
    }

    function __ERC20_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {
        ERC20Storage storage $ = _getERC20Storage();
        $._name = name_;
        $._symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Skips emitting an {Approval} event indicating an allowance update. This is not
     * required by the ERC. See {xref-ERC20-_approve-address-address-uint256-bool-}[_approve].
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        ERC20Storage storage $ = _getERC20Storage();
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            $._totalSupply += value;
        } else {
            uint256 fromBalance = $._balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                $._balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                $._totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                $._balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     *
     * ```solidity
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        ERC20Storage storage $ = _getERC20Storage();
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        $._allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/AccessControl.sol)

pragma solidity ^0.8.20;

import {IAccessControl} from "@openzeppelin/contracts/access/IAccessControl.sol";
import {ContextUpgradeable} from "../utils/ContextUpgradeable.sol";
import {ERC165Upgradeable} from "../utils/introspection/ERC165Upgradeable.sol";
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```solidity
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```solidity
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it. We recommend using {AccessControlDefaultAdminRules}
 * to enforce additional security measures for this role.
 */
abstract contract AccessControlUpgradeable is Initializable, ContextUpgradeable, IAccessControl, ERC165Upgradeable {
    struct RoleData {
        mapping(address account => bool) hasRole;
        bytes32 adminRole;
    }

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;


    /// @custom:storage-location erc7201:openzeppelin.storage.AccessControl
    struct AccessControlStorage {
        mapping(bytes32 role => RoleData) _roles;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.AccessControl")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant AccessControlStorageLocation = 0x02dd7bc7dec4dceedda775e58dd541e08a116c6c53815c0bd028192f7b626800;

    function _getAccessControlStorage() private pure returns (AccessControlStorage storage $) {
        assembly {
            $.slot := AccessControlStorageLocation
        }
    }

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with an {AccessControlUnauthorizedAccount} error including the required role.
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role);
        _;
    }

    function __AccessControl_init() internal onlyInitializing {
    }

    function __AccessControl_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view virtual returns (bool) {
        AccessControlStorage storage $ = _getAccessControlStorage();
        return $._roles[role].hasRole[account];
    }

    /**
     * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `_msgSender()`
     * is missing `role`. Overriding this function changes the behavior of the {onlyRole} modifier.
     */
    function _checkRole(bytes32 role) internal view virtual {
        _checkRole(role, _msgSender());
    }

    /**
     * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `account`
     * is missing `role`.
     */
    function _checkRole(bytes32 role, address account) internal view virtual {
        if (!hasRole(role, account)) {
            revert AccessControlUnauthorizedAccount(account, role);
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view virtual returns (bytes32) {
        AccessControlStorage storage $ = _getAccessControlStorage();
        return $._roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleGranted} event.
     */
    function grantRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleRevoked} event.
     */
    function revokeRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been revoked `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `callerConfirmation`.
     *
     * May emit a {RoleRevoked} event.
     */
    function renounceRole(bytes32 role, address callerConfirmation) public virtual {
        if (callerConfirmation != _msgSender()) {
            revert AccessControlBadConfirmation();
        }

        _revokeRole(role, callerConfirmation);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        AccessControlStorage storage $ = _getAccessControlStorage();
        bytes32 previousAdminRole = getRoleAdmin(role);
        $._roles[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }

    /**
     * @dev Attempts to grant `role` to `account` and returns a boolean indicating if `role` was granted.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleGranted} event.
     */
    function _grantRole(bytes32 role, address account) internal virtual returns (bool) {
        AccessControlStorage storage $ = _getAccessControlStorage();
        if (!hasRole(role, account)) {
            $._roles[role].hasRole[account] = true;
            emit RoleGranted(role, account, _msgSender());
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Attempts to revoke `role` to `account` and returns a boolean indicating if `role` was revoked.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleRevoked} event.
     */
    function _revokeRole(bytes32 role, address account) internal virtual returns (bool) {
        AccessControlStorage storage $ = _getAccessControlStorage();
        if (hasRole(role, account)) {
            $._roles[role].hasRole[account] = false;
            emit RoleRevoked(role, account, _msgSender());
            return true;
        } else {
            return false;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/beacon/IBeacon.sol)

pragma solidity ^0.8.20;

/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {UpgradeableBeacon} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {Context} from "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";

/**
 * @title Minimal interface for an `Strategy` contract.
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 * @notice Custom `Strategy` implementations may expand extensively on this interface.
 */
interface IStrategy {
    /**
     * @notice Used to emit an event for the exchange rate between 1 share and underlying token in a strategy contract
     * @param rate is the exchange rate in wad 18 decimals
     * @dev Tokens that do not have 18 decimals must have offchain services scale the exchange rate by the proper magnitude
     */
    event ExchangeRateEmitted(uint256 rate);

    /**
     * Used to emit the underlying token and its decimals on strategy creation
     * @notice token
     * @param token is the ERC20 token of the strategy
     * @param decimals are the decimals of the ERC20 token in the strategy
     */
    event StrategyTokenSet(IERC20 token, uint8 decimals);

    /**
     * @notice Used to deposit tokens into this Strategy
     * @param token is the ERC20 token being deposited
     * @param amount is the amount of token being deposited
     * @dev This function is only callable by the strategyManager contract. It is invoked inside of the strategyManager's
     * `depositIntoStrategy` function, and individual share balances are recorded in the strategyManager as well.
     * @return newShares is the number of new shares issued at the current exchange ratio.
     */
    function deposit(IERC20 token, uint256 amount) external returns (uint256);

    /**
     * @notice Used to withdraw tokens from this Strategy, to the `recipient`'s address
     * @param recipient is the address to receive the withdrawn funds
     * @param token is the ERC20 token being transferred out
     * @param amountShares is the amount of shares being withdrawn
     * @dev This function is only callable by the strategyManager contract. It is invoked inside of the strategyManager's
     * other functions, and individual share balances are recorded in the strategyManager as well.
     */
    function withdraw(address recipient, IERC20 token, uint256 amountShares) external;

    /**
     * @notice Used to convert a number of shares to the equivalent amount of underlying tokens for this strategy.
     * @notice In contrast to `sharesToUnderlyingView`, this function **may** make state modifications
     * @param amountShares is the amount of shares to calculate its conversion into the underlying token
     * @return The amount of underlying tokens corresponding to the input `amountShares`
     * @dev Implementation for these functions in particular may vary significantly for different strategies
     */
    function sharesToUnderlying(uint256 amountShares) external returns (uint256);

    /**
     * @notice Used to convert an amount of underlying tokens to the equivalent amount of shares in this strategy.
     * @notice In contrast to `underlyingToSharesView`, this function **may** make state modifications
     * @param amountUnderlying is the amount of `underlyingToken` to calculate its conversion into strategy shares
     * @return The amount of underlying tokens corresponding to the input `amountShares`
     * @dev Implementation for these functions in particular may vary significantly for different strategies
     */
    function underlyingToShares(uint256 amountUnderlying) external returns (uint256);

    /**
     * @notice convenience function for fetching the current underlying value of all of the `user`'s shares in
     * this strategy. In contrast to `userUnderlyingView`, this function **may** make state modifications
     */
    function userUnderlying(address user) external returns (uint256);

    /**
     * @notice convenience function for fetching the current total shares of `user` in this strategy, by
     * querying the `strategyManager` contract
     */
    function shares(address user) external view returns (uint256);

    /**
     * @notice Used to convert a number of shares to the equivalent amount of underlying tokens for this strategy.
     * @notice In contrast to `sharesToUnderlying`, this function guarantees no state modifications
     * @param amountShares is the amount of shares to calculate its conversion into the underlying token
     * @return The amount of shares corresponding to the input `amountUnderlying`
     * @dev Implementation for these functions in particular may vary significantly for different strategies
     */
    function sharesToUnderlyingView(uint256 amountShares) external view returns (uint256);

    /**
     * @notice Used to convert an amount of underlying tokens to the equivalent amount of shares in this strategy.
     * @notice In contrast to `underlyingToShares`, this function guarantees no state modifications
     * @param amountUnderlying is the amount of `underlyingToken` to calculate its conversion into strategy shares
     * @return The amount of shares corresponding to the input `amountUnderlying`
     * @dev Implementation for these functions in particular may vary significantly for different strategies
     */
    function underlyingToSharesView(uint256 amountUnderlying) external view returns (uint256);

    /**
     * @notice convenience function for fetching the current underlying value of all of the `user`'s shares in
     * this strategy. In contrast to `userUnderlying`, this function guarantees no state modifications
     */
    function userUnderlyingView(address user) external view returns (uint256);

    /// @notice The underlying token for shares in this Strategy
    function underlyingToken() external view returns (IERC20);

    /// @notice The total number of extant shares in this Strategy
    function totalShares() external view returns (uint256);

    /// @notice Returns either a brief string explaining the strategy's goal & purpose, or a link to metadata that explains in more detail.
    function explanation() external view returns (string memory);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;

/**
 * @title The interface for common signature utilities.
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 */
interface ISignatureUtils {
    // @notice Struct that bundles together a signature and an expiration time for the signature. Used primarily for stack management.
    struct SignatureWithExpiry {
        // the signature itself, formatted as a single bytes object
        bytes signature;
        // the expiration timestamp (UTC) of the signature
        uint256 expiry;
    }

    // @notice Struct that bundles together a signature, a salt for uniqueness, and an expiration time for the signature. Used primarily for stack management.
    struct SignatureWithSaltAndExpiry {
        // the signature itself, formatted as a single bytes object
        bytes signature;
        // the salt used to generate the signature
        bytes32 salt;
        // the expiration timestamp (UTC) of the signature
        uint256 expiry;
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;

import "./IStrategyManager.sol";
import "./IDelegationManager.sol";

/**
 * @title Interface for the primary 'slashing' contract for EigenLayer.
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 * @notice See the `Slasher` contract itself for implementation details.
 */
interface ISlasher {
    // struct used to store information about the current state of an operator's obligations to middlewares they are serving
    struct MiddlewareTimes {
        // The update block for the middleware whose most recent update was earliest, i.e. the 'stalest' update out of all middlewares the operator is serving
        uint32 stalestUpdateBlock;
        // The latest 'serveUntilBlock' from all of the middleware that the operator is serving
        uint32 latestServeUntilBlock;
    }

    // struct used to store details relevant to a single middleware that an operator has opted-in to serving
    struct MiddlewareDetails {
        // the block at which the contract begins being able to finalize the operator's registration with the service via calling `recordFirstStakeUpdate`
        uint32 registrationMayBeginAtBlock;
        // the block before which the contract is allowed to slash the user
        uint32 contractCanSlashOperatorUntilBlock;
        // the block at which the middleware's view of the operator's stake was most recently updated
        uint32 latestUpdateBlock;
    }

    /// @notice Emitted when a middleware times is added to `operator`'s array.
    event MiddlewareTimesAdded(
        address operator, uint256 index, uint32 stalestUpdateBlock, uint32 latestServeUntilBlock
    );

    /// @notice Emitted when `operator` begins to allow `contractAddress` to slash them.
    event OptedIntoSlashing(address indexed operator, address indexed contractAddress);

    /// @notice Emitted when `contractAddress` signals that it will no longer be able to slash `operator` after the `contractCanSlashOperatorUntilBlock`.
    event SlashingAbilityRevoked(
        address indexed operator, address indexed contractAddress, uint32 contractCanSlashOperatorUntilBlock
    );

    /**
     * @notice Emitted when `slashingContract` 'freezes' the `slashedOperator`.
     * @dev The `slashingContract` must have permission to slash the `slashedOperator`, i.e. `canSlash(slasherOperator, slashingContract)` must return 'true'.
     */
    event OperatorFrozen(address indexed slashedOperator, address indexed slashingContract);

    /// @notice Emitted when `previouslySlashedAddress` is 'unfrozen', allowing them to again move deposited funds within EigenLayer.
    event FrozenStatusReset(address indexed previouslySlashedAddress);

    /**
     * @notice Gives the `contractAddress` permission to slash the funds of the caller.
     * @dev Typically, this function must be called prior to registering for a middleware.
     */
    function optIntoSlashing(address contractAddress) external;

    /**
     * @notice Used for 'slashing' a certain operator.
     * @param toBeFrozen The operator to be frozen.
     * @dev Technically the operator is 'frozen' (hence the name of this function), and then subject to slashing pending a decision by a human-in-the-loop.
     * @dev The operator must have previously given the caller (which should be a contract) the ability to slash them, through a call to `optIntoSlashing`.
     */
    function freezeOperator(address toBeFrozen) external;

    /**
     * @notice Removes the 'frozen' status from each of the `frozenAddresses`
     * @dev Callable only by the contract owner (i.e. governance).
     */
    function resetFrozenStatus(address[] calldata frozenAddresses) external;

    /**
     * @notice this function is a called by middlewares during an operator's registration to make sure the operator's stake at registration
     *         is slashable until serveUntil
     * @param operator the operator whose stake update is being recorded
     * @param serveUntilBlock the block until which the operator's stake at the current block is slashable
     * @dev adds the middleware's slashing contract to the operator's linked list
     */
    function recordFirstStakeUpdate(address operator, uint32 serveUntilBlock) external;

    /**
     * @notice this function is a called by middlewares during a stake update for an operator (perhaps to free pending withdrawals)
     *         to make sure the operator's stake at updateBlock is slashable until serveUntil
     * @param operator the operator whose stake update is being recorded
     * @param updateBlock the block for which the stake update is being recorded
     * @param serveUntilBlock the block until which the operator's stake at updateBlock is slashable
     * @param insertAfter the element of the operators linked list that the currently updating middleware should be inserted after
     * @dev insertAfter should be calculated offchain before making the transaction that calls this. this is subject to race conditions,
     *      but it is anticipated to be rare and not detrimental.
     */
    function recordStakeUpdate(
        address operator,
        uint32 updateBlock,
        uint32 serveUntilBlock,
        uint256 insertAfter
    ) external;

    /**
     * @notice this function is a called by middlewares during an operator's deregistration to make sure the operator's stake at deregistration
     *         is slashable until serveUntil
     * @param operator the operator whose stake update is being recorded
     * @param serveUntilBlock the block until which the operator's stake at the current block is slashable
     * @dev removes the middleware's slashing contract to the operator's linked list and revokes the middleware's (i.e. caller's) ability to
     * slash `operator` once `serveUntil` is reached
     */
    function recordLastStakeUpdateAndRevokeSlashingAbility(address operator, uint32 serveUntilBlock) external;

    /// @notice The StrategyManager contract of EigenLayer
    function strategyManager() external view returns (IStrategyManager);

    /// @notice The DelegationManager contract of EigenLayer
    function delegation() external view returns (IDelegationManager);

    /**
     * @notice Used to determine whether `staker` is actively 'frozen'. If a staker is frozen, then they are potentially subject to
     * slashing of their funds, and cannot cannot deposit or withdraw from the strategyManager until the slashing process is completed
     * and the staker's status is reset (to 'unfrozen').
     * @param staker The staker of interest.
     * @return Returns 'true' if `staker` themselves has their status set to frozen, OR if the staker is delegated
     * to an operator who has their status set to frozen. Otherwise returns 'false'.
     */
    function isFrozen(address staker) external view returns (bool);

    /// @notice Returns true if `slashingContract` is currently allowed to slash `toBeSlashed`.
    function canSlash(address toBeSlashed, address slashingContract) external view returns (bool);

    /// @notice Returns the block until which `serviceContract` is allowed to slash the `operator`.
    function contractCanSlashOperatorUntilBlock(
        address operator,
        address serviceContract
    ) external view returns (uint32);

    /// @notice Returns the block at which the `serviceContract` last updated its view of the `operator`'s stake
    function latestUpdateBlock(address operator, address serviceContract) external view returns (uint32);

    /// @notice A search routine for finding the correct input value of `insertAfter` to `recordStakeUpdate` / `_updateMiddlewareList`.
    function getCorrectValueForInsertAfter(address operator, uint32 updateBlock) external view returns (uint256);

    /**
     * @notice Returns 'true' if `operator` can currently complete a withdrawal started at the `withdrawalStartBlock`, with `middlewareTimesIndex` used
     * to specify the index of a `MiddlewareTimes` struct in the operator's list (i.e. an index in `operatorToMiddlewareTimes[operator]`). The specified
     * struct is consulted as proof of the `operator`'s ability (or lack thereof) to complete the withdrawal.
     * This function will return 'false' if the operator cannot currently complete a withdrawal started at the `withdrawalStartBlock`, *or* in the event
     * that an incorrect `middlewareTimesIndex` is supplied, even if one or more correct inputs exist.
     * @param operator Either the operator who queued the withdrawal themselves, or if the withdrawing party is a staker who delegated to an operator,
     * this address is the operator *who the staker was delegated to* at the time of the `withdrawalStartBlock`.
     * @param withdrawalStartBlock The block number at which the withdrawal was initiated.
     * @param middlewareTimesIndex Indicates an index in `operatorToMiddlewareTimes[operator]` to consult as proof of the `operator`'s ability to withdraw
     * @dev The correct `middlewareTimesIndex` input should be computable off-chain.
     */
    function canWithdraw(
        address operator,
        uint32 withdrawalStartBlock,
        uint256 middlewareTimesIndex
    ) external returns (bool);

    /**
     * operator =>
     *  [
     *      (
     *          the least recent update block of all of the middlewares it's serving/served,
     *          latest time that the stake bonded at that update needed to serve until
     *      )
     *  ]
     */
    function operatorToMiddlewareTimes(
        address operator,
        uint256 arrayIndex
    ) external view returns (MiddlewareTimes memory);

    /// @notice Getter function for fetching `operatorToMiddlewareTimes[operator].length`
    function middlewareTimesLength(address operator) external view returns (uint256);

    /// @notice Getter function for fetching `operatorToMiddlewareTimes[operator][index].stalestUpdateBlock`.
    function getMiddlewareTimesIndexStalestUpdateBlock(address operator, uint32 index) external view returns (uint32);

    /// @notice Getter function for fetching `operatorToMiddlewareTimes[operator][index].latestServeUntil`.
    function getMiddlewareTimesIndexServeUntilBlock(address operator, uint32 index) external view returns (uint32);

    /// @notice Getter function for fetching `_operatorToWhitelistedContractsByUpdate[operator].size`.
    function operatorWhitelistedContractsLinkedListSize(address operator) external view returns (uint256);

    /// @notice Getter function for fetching a single node in the operator's linked list (`_operatorToWhitelistedContractsByUpdate[operator]`).
    function operatorWhitelistedContractsLinkedListEntry(
        address operator,
        address node
    ) external view returns (bool, uint256, uint256);
}

// ┏━━━┓━┏┓━┏┓━━┏━━━┓━━┏━━━┓━━━━┏━━━┓━━━━━━━━━━━━━━━━━━━┏┓━━━━━┏━━━┓━━━━━━━━━┏┓━━━━━━━━━━━━━━┏┓━
// ┃┏━━┛┏┛┗┓┃┃━━┃┏━┓┃━━┃┏━┓┃━━━━┗┓┏┓┃━━━━━━━━━━━━━━━━━━┏┛┗┓━━━━┃┏━┓┃━━━━━━━━┏┛┗┓━━━━━━━━━━━━┏┛┗┓
// ┃┗━━┓┗┓┏┛┃┗━┓┗┛┏┛┃━━┃┃━┃┃━━━━━┃┃┃┃┏━━┓┏━━┓┏━━┓┏━━┓┏┓┗┓┏┛━━━━┃┃━┗┛┏━━┓┏━┓━┗┓┏┛┏━┓┏━━┓━┏━━┓┗┓┏┛
// ┃┏━━┛━┃┃━┃┏┓┃┏━┛┏┛━━┃┃━┃┃━━━━━┃┃┃┃┃┏┓┃┃┏┓┃┃┏┓┃┃━━┫┣┫━┃┃━━━━━┃┃━┏┓┃┏┓┃┃┏┓┓━┃┃━┃┏┛┗━┓┃━┃┏━┛━┃┃━
// ┃┗━━┓━┃┗┓┃┃┃┃┃┃┗━┓┏┓┃┗━┛┃━━━━┏┛┗┛┃┃┃━┫┃┗┛┃┃┗┛┃┣━━┃┃┃━┃┗┓━━━━┃┗━┛┃┃┗┛┃┃┃┃┃━┃┗┓┃┃━┃┗┛┗┓┃┗━┓━┃┗┓
// ┗━━━┛━┗━┛┗┛┗┛┗━━━┛┗┛┗━━━┛━━━━┗━━━┛┗━━┛┃┏━┛┗━━┛┗━━┛┗┛━┗━┛━━━━┗━━━┛┗━━┛┗┛┗┛━┗━┛┗┛━┗━━━┛┗━━┛━┗━┛
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┃┃━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┗┛━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

// SPDX-License-Identifier: CC0-1.0

pragma solidity >=0.5.0;

// This interface is designed to be compatible with the Vyper version.
/// @notice This is the Ethereum 2.0 deposit contract interface.
/// For more information see the Phase 0 specification under https://github.com/ethereum/eth2.0-specs
interface IETHPOSDeposit {
    /// @notice A processed deposit event.
    event DepositEvent(bytes pubkey, bytes withdrawal_credentials, bytes amount, bytes signature, bytes index);

    /// @notice Submit a Phase 0 DepositData object.
    /// @param pubkey A BLS12-381 public key.
    /// @param withdrawal_credentials Commitment to a public key for withdrawals.
    /// @param signature A BLS12-381 signature.
    /// @param deposit_data_root The SHA-256 hash of the SSZ-encoded DepositData object.
    /// Used as a protection against malformed input.
    function deposit(
        bytes calldata pubkey,
        bytes calldata withdrawal_credentials,
        bytes calldata signature,
        bytes32 deposit_data_root
    ) external payable;

    /// @notice Query the current deposit root hash.
    /// @return The deposit root hash.
    function get_deposit_root() external view returns (bytes32);

    /// @notice Query the current deposit count.
    /// @return The deposit count encoded as a little endian 64-bit number.
    function get_deposit_count() external view returns (bytes memory);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;

import "../libraries/BeaconChainProofs.sol";
import "./IEigenPodManager.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";

/**
 * @title The implementation contract used for restaking beacon chain ETH on EigenLayer
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 * @dev Note that all beacon chain balances are stored as gwei within the beacon chain datastructures. We choose
 *   to account balances in terms of gwei in the EigenPod contract and convert to wei when making calls to other contracts
 */
interface IEigenPod {
    /**
     *
     *                                STRUCTS / ENUMS
     *
     */
    enum VALIDATOR_STATUS {
        INACTIVE, // doesnt exist
        ACTIVE, // staked on ethpos and withdrawal credentials are pointed to the EigenPod
        WITHDRAWN // withdrawn from the Beacon Chain

    }

    struct ValidatorInfo {
        // index of the validator in the beacon chain
        uint64 validatorIndex;
        // amount of beacon chain ETH restaked on EigenLayer in gwei
        uint64 restakedBalanceGwei;
        //timestamp of the validator's most recent balance update
        uint64 lastCheckpointedAt;
        // status of the validator
        VALIDATOR_STATUS status;
    }

    struct Checkpoint {
        bytes32 beaconBlockRoot;
        uint24 proofsRemaining;
        uint64 podBalanceGwei;
        int128 balanceDeltasGwei;
    }

    /**
     *
     *                                    EVENTS
     *
     */

    /// @notice Emitted when an ETH validator stakes via this eigenPod
    event EigenPodStaked(bytes pubkey);

    /// @notice Emitted when a pod owner updates the proof submitter address
    event ProofSubmitterUpdated(address prevProofSubmitter, address newProofSubmitter);

    /// @notice Emitted when an ETH validator's withdrawal credentials are successfully verified to be pointed to this eigenPod
    event ValidatorRestaked(uint40 validatorIndex);

    /// @notice Emitted when an ETH validator's  balance is proven to be updated.  Here newValidatorBalanceGwei
    //  is the validator's balance that is credited on EigenLayer.
    event ValidatorBalanceUpdated(uint40 validatorIndex, uint64 balanceTimestamp, uint64 newValidatorBalanceGwei);

    /// @notice Emitted when restaked beacon chain ETH is withdrawn from the eigenPod.
    event RestakedBeaconChainETHWithdrawn(address indexed recipient, uint256 amount);

    /// @notice Emitted when ETH is received via the `receive` fallback
    event NonBeaconChainETHReceived(uint256 amountReceived);

    /// @notice Emitted when a checkpoint is created
    event CheckpointCreated(
        uint64 indexed checkpointTimestamp, bytes32 indexed beaconBlockRoot, uint256 validatorCount
    );

    /// @notice Emitted when a checkpoint is finalized
    event CheckpointFinalized(uint64 indexed checkpointTimestamp, int256 totalShareDeltaWei);

    /// @notice Emitted when a validator is proven for a given checkpoint
    event ValidatorCheckpointed(uint64 indexed checkpointTimestamp, uint40 indexed validatorIndex);

    /// @notice Emitted when a validaor is proven to have 0 balance at a given checkpoint
    event ValidatorWithdrawn(uint64 indexed checkpointTimestamp, uint40 indexed validatorIndex);

    /**
     *
     *                       EXTERNAL STATE-CHANGING METHODS
     *
     */

    /// @notice Used to initialize the pointers to contracts crucial to the pod's functionality, in beacon proxy construction from EigenPodManager
    function initialize(address owner) external;

    /// @notice Called by EigenPodManager when the owner wants to create another ETH validator.
    function stake(bytes calldata pubkey, bytes calldata signature, bytes32 depositDataRoot) external payable;

    /**
     * @notice Transfers `amountWei` in ether from this contract to the specified `recipient` address
     * @notice Called by EigenPodManager to withdrawBeaconChainETH that has been added to the EigenPod's balance due to a withdrawal from the beacon chain.
     * @dev The podOwner must have already proved sufficient withdrawals, so that this pod's `withdrawableRestakedExecutionLayerGwei` exceeds the
     * `amountWei` input (when converted to GWEI).
     * @dev Reverts if `amountWei` is not a whole Gwei amount
     */
    function withdrawRestakedBeaconChainETH(address recipient, uint256 amount) external;

    /**
     * @dev Create a checkpoint used to prove this pod's active validator set. Checkpoints are completed
     * by submitting one checkpoint proof per ACTIVE validator. During the checkpoint process, the total
     * change in ACTIVE validator balance is tracked, and any validators with 0 balance are marked `WITHDRAWN`.
     * @dev Once finalized, the pod owner is awarded shares corresponding to:
     * - the total change in their ACTIVE validator balances
     * - any ETH in the pod not already awarded shares
     * @dev A checkpoint cannot be created if the pod already has an outstanding checkpoint. If
     * this is the case, the pod owner MUST complete the existing checkpoint before starting a new one.
     * @param revertIfNoBalance Forces a revert if the pod ETH balance is 0. This allows the pod owner
     * to prevent accidentally starting a checkpoint that will not increase their shares
     */
    function startCheckpoint(bool revertIfNoBalance) external;

    /**
     * @dev Progress the current checkpoint towards completion by submitting one or more validator
     * checkpoint proofs. Anyone can call this method to submit proofs towards the current checkpoint.
     * For each validator proven, the current checkpoint's `proofsRemaining` decreases.
     * @dev If the checkpoint's `proofsRemaining` reaches 0, the checkpoint is finalized.
     * (see `_updateCheckpoint` for more details)
     * @dev This method can only be called when there is a currently-active checkpoint.
     * @param balanceContainerProof proves the beacon's current balance container root against a checkpoint's `beaconBlockRoot`
     * @param proofs Proofs for one or more validator current balances against the `balanceContainerRoot`
     */
    function verifyCheckpointProofs(
        BeaconChainProofs.BalanceContainerProof calldata balanceContainerProof,
        BeaconChainProofs.BalanceProof[] calldata proofs
    ) external;

    /**
     * @dev Verify one or more validators have their withdrawal credentials pointed at this EigenPod, and award
     * shares based on their effective balance. Proven validators are marked `ACTIVE` within the EigenPod, and
     * future checkpoint proofs will need to include them.
     * @dev Withdrawal credential proofs MUST NOT be older than `currentCheckpointTimestamp`.
     * @dev Validators proven via this method MUST NOT have an exit epoch set already.
     * @param beaconTimestamp the beacon chain timestamp sent to the 4788 oracle contract. Corresponds
     * to the parent beacon block root against which the proof is verified.
     * @param stateRootProof proves a beacon state root against a beacon block root
     * @param validatorIndices a list of validator indices being proven
     * @param validatorFieldsProofs proofs of each validator's `validatorFields` against the beacon state root
     * @param validatorFields the fields of the beacon chain "Validator" container. See consensus specs for
     * details: https://github.com/ethereum/consensus-specs/blob/dev/specs/phase0/beacon-chain.md#validator
     */
    function verifyWithdrawalCredentials(
        uint64 beaconTimestamp,
        BeaconChainProofs.StateRootProof calldata stateRootProof,
        uint40[] calldata validatorIndices,
        bytes[] calldata validatorFieldsProofs,
        bytes32[][] calldata validatorFields
    ) external;

    /**
     * @dev Prove that one of this pod's active validators was slashed on the beacon chain. A successful
     * staleness proof allows the caller to start a checkpoint.
     *
     * @dev Note that in order to start a checkpoint, any existing checkpoint must already be completed!
     * (See `_startCheckpoint` for details)
     *
     * @dev Note that this method allows anyone to start a checkpoint as soon as a slashing occurs on the beacon
     * chain. This is intended to make it easier to external watchers to keep a pod's balance up to date.
     *
     * @dev Note too that beacon chain slashings are not instant. There is a delay between the initial slashing event
     * and the validator's final exit back to the execution layer. During this time, the validator's balance may or
     * may not drop further due to a correlation penalty. This method allows proof of a slashed validator
     * to initiate a checkpoint for as long as the validator remains on the beacon chain. Once the validator
     * has exited and been checkpointed at 0 balance, they are no longer "checkpoint-able" and cannot be proven
     * "stale" via this method.
     * See https://eth2book.info/capella/part3/transition/epoch/#slashings for more info.
     *
     * @param beaconTimestamp the beacon chain timestamp sent to the 4788 oracle contract. Corresponds
     * to the parent beacon block root against which the proof is verified.
     * @param stateRootProof proves a beacon state root against a beacon block root
     * @param proof the fields of the beacon chain "Validator" container, along with a merkle proof against
     * the beacon state root. See the consensus specs for more details:
     * https://github.com/ethereum/consensus-specs/blob/dev/specs/phase0/beacon-chain.md#validator
     *
     * @dev Staleness conditions:
     * - Validator's last checkpoint is older than `beaconTimestamp`
     * - Validator MUST be in `ACTIVE` status in the pod
     * - Validator MUST be slashed on the beacon chain
     */
    function verifyStaleBalance(
        uint64 beaconTimestamp,
        BeaconChainProofs.StateRootProof calldata stateRootProof,
        BeaconChainProofs.ValidatorProof calldata proof
    ) external;

    /// @notice called by owner of a pod to remove any ERC20s deposited in the pod
    function recoverTokens(IERC20[] memory tokenList, uint256[] memory amountsToWithdraw, address recipient) external;

    /// @notice Allows the owner of a pod to update the proof submitter, a permissioned
    /// address that can call `startCheckpoint` and `verifyWithdrawalCredentials`.
    /// @dev Note that EITHER the podOwner OR proofSubmitter can access these methods,
    /// so it's fine to set your proofSubmitter to 0 if you want the podOwner to be the
    /// only address that can call these methods.
    /// @param newProofSubmitter The new proof submitter address. If set to 0, only the
    /// pod owner will be able to call `startCheckpoint` and `verifyWithdrawalCredentials`
    function setProofSubmitter(address newProofSubmitter) external;

    /**
     *
     *                                VIEW METHODS
     *
     */

    /// @notice An address with permissions to call `startCheckpoint` and `verifyWithdrawalCredentials`, set
    /// by the podOwner. This role exists to allow a podOwner to designate a hot wallet that can call
    /// these methods, allowing the podOwner to remain a cold wallet that is only used to manage funds.
    /// @dev If this address is NOT set, only the podOwner can call `startCheckpoint` and `verifyWithdrawalCredentials`
    function proofSubmitter() external view returns (address);

    /// @notice the amount of execution layer ETH in this contract that is staked in EigenLayer (i.e. withdrawn from beaconchain but not EigenLayer),
    function withdrawableRestakedExecutionLayerGwei() external view returns (uint64);

    /// @notice The single EigenPodManager for EigenLayer
    function eigenPodManager() external view returns (IEigenPodManager);

    /// @notice The owner of this EigenPod
    function podOwner() external view returns (address);

    /// @notice Returns the validatorInfo struct for the provided pubkeyHash
    function validatorPubkeyHashToInfo(bytes32 validatorPubkeyHash) external view returns (ValidatorInfo memory);

    /// @notice Returns the validatorInfo struct for the provided pubkey
    function validatorPubkeyToInfo(bytes calldata validatorPubkey) external view returns (ValidatorInfo memory);

    /// @notice This returns the status of a given validator
    function validatorStatus(bytes32 pubkeyHash) external view returns (VALIDATOR_STATUS);

    /// @notice This returns the status of a given validator pubkey
    function validatorStatus(bytes calldata validatorPubkey) external view returns (VALIDATOR_STATUS);

    /// @notice Number of validators with proven withdrawal credentials, who do not have proven full withdrawals
    function activeValidatorCount() external view returns (uint256);

    /// @notice The timestamp of the last checkpoint finalized
    function lastCheckpointTimestamp() external view returns (uint64);

    /// @notice The timestamp of the currently-active checkpoint. Will be 0 if there is not active checkpoint
    function currentCheckpointTimestamp() external view returns (uint64);

    /// @notice Returns the currently-active checkpoint
    function currentCheckpoint() external view returns (Checkpoint memory);

    /// @notice For each checkpoint, the total balance attributed to exited validators, in gwei
    ///
    /// NOTE that the values added to this mapping are NOT guaranteed to capture the entirety of a validator's
    /// exit - rather, they capture the total change in a validator's balance when a checkpoint shows their
    /// balance change from nonzero to zero. While a change from nonzero to zero DOES guarantee that a validator
    /// has been fully exited, it is possible that the magnitude of this change does not capture what is
    /// typically thought of as a "full exit."
    ///
    /// For example:
    /// 1. Consider a validator was last checkpointed at 32 ETH before exiting. Once the exit has been processed,
    /// it is expected that the validator's exited balance is calculated to be `32 ETH`.
    /// 2. However, before `startCheckpoint` is called, a deposit is made to the validator for 1 ETH. The beacon
    /// chain will automatically withdraw this ETH, but not until the withdrawal sweep passes over the validator
    /// again. Until this occurs, the validator's current balance (used for checkpointing) is 1 ETH.
    /// 3. If `startCheckpoint` is called at this point, the balance delta calculated for this validator will be
    /// `-31 ETH`, and because the validator has a nonzero balance, it is not marked WITHDRAWN.
    /// 4. After the exit is processed by the beacon chain, a subsequent `startCheckpoint` and checkpoint proof
    /// will calculate a balance delta of `-1 ETH` and attribute a 1 ETH exit to the validator.
    ///
    /// If this edge case impacts your usecase, it should be possible to mitigate this by monitoring for deposits
    /// to your exited validators, and waiting to call `startCheckpoint` until those deposits have been automatically
    /// exited.
    ///
    /// Additional edge cases this mapping does not cover:
    /// - If a validator is slashed, their balance exited will reflect their original balance rather than the slashed amount
    /// - The final partial withdrawal for an exited validator will be likely be included in this mapping.
    ///   i.e. if a validator was last checkpointed at 32.1 ETH before exiting, the next checkpoint will calculate their
    ///   "exited" amount to be 32.1 ETH rather than 32 ETH.
    function checkpointBalanceExitedGwei(uint64) external view returns (uint64);

    /// @notice Query the 4788 oracle to get the parent block root of the slot with the given `timestamp`
    /// @param timestamp of the block for which the parent block root will be returned. MUST correspond
    /// to an existing slot within the last 24 hours. If the slot at `timestamp` was skipped, this method
    /// will revert.
    function getParentBlockRoot(uint64 timestamp) external view returns (bytes32);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;

import "../interfaces/IPauserRegistry.sol";

/**
 * @title Adds pausability to a contract, with pausing & unpausing controlled by the `pauser` and `unpauser` of a PauserRegistry contract.
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 * @notice Contracts that inherit from this contract may define their own `pause` and `unpause` (and/or related) functions.
 * These functions should be permissioned as "onlyPauser" which defers to a `PauserRegistry` for determining access control.
 * @dev Pausability is implemented using a uint256, which allows up to 256 different single bit-flags; each bit can potentially pause different functionality.
 * Inspiration for this was taken from the NearBridge design here https://etherscan.io/address/0x3FEFc5A4B1c02f21cBc8D3613643ba0635b9a873#code.
 * For the `pause` and `unpause` functions we've implemented, if you pause, you can only flip (any number of) switches to on/1 (aka "paused"), and if you unpause,
 * you can only flip (any number of) switches to off/0 (aka "paused").
 * If you want a pauseXYZ function that just flips a single bit / "pausing flag", it will:
 * 1) 'bit-wise and' (aka `&`) a flag with the current paused state (as a uint256)
 * 2) update the paused state to this new value
 * @dev We note as well that we have chosen to identify flags by their *bit index* as opposed to their numerical value, so, e.g. defining `DEPOSITS_PAUSED = 3`
 * indicates specifically that if the *third bit* of `_paused` is flipped -- i.e. it is a '1' -- then deposits should be paused
 */
interface IPausable {
    /// @notice Emitted when the `pauserRegistry` is set to `newPauserRegistry`.
    event PauserRegistrySet(IPauserRegistry pauserRegistry, IPauserRegistry newPauserRegistry);

    /// @notice Emitted when the pause is triggered by `account`, and changed to `newPausedStatus`.
    event Paused(address indexed account, uint256 newPausedStatus);

    /// @notice Emitted when the pause is lifted by `account`, and changed to `newPausedStatus`.
    event Unpaused(address indexed account, uint256 newPausedStatus);

    /// @notice Address of the `PauserRegistry` contract that this contract defers to for determining access control (for pausing).
    function pauserRegistry() external view returns (IPauserRegistry);

    /**
     * @notice This function is used to pause an EigenLayer contract's functionality.
     * It is permissioned to the `pauser` address, which is expected to be a low threshold multisig.
     * @param newPausedStatus represents the new value for `_paused` to take, which means it may flip several bits at once.
     * @dev This function can only pause functionality, and thus cannot 'unflip' any bit in `_paused` from 1 to 0.
     */
    function pause(uint256 newPausedStatus) external;

    /**
     * @notice Alias for `pause(type(uint256).max)`.
     */
    function pauseAll() external;

    /**
     * @notice This function is used to unpause an EigenLayer contract's functionality.
     * It is permissioned to the `unpauser` address, which is expected to be a high threshold multisig or governance contract.
     * @param newPausedStatus represents the new value for `_paused` to take, which means it may flip several bits at once.
     * @dev This function can only unpause functionality, and thus cannot 'flip' any bit in `_paused` from 0 to 1.
     */
    function unpause(uint256 newPausedStatus) external;

    /// @notice Returns the current paused status as a uint256.
    function paused() external view returns (uint256);

    /// @notice Returns 'true' if the `indexed`th bit of `_paused` is 1, and 'false' otherwise
    function paused(uint8 index) external view returns (bool);

    /// @notice Allows the unpauser to set a new pauser registry
    function setPauserRegistry(IPauserRegistry newPauserRegistry) external;
}

// SPDX-License-Identifier: BUSL-1.1

pragma solidity ^0.8.0;

import "./Merkle.sol";
import "../libraries/Endian.sol";

//Utility library for parsing and PHASE0 beacon chain block headers
//SSZ Spec: https://github.com/ethereum/consensus-specs/blob/dev/ssz/simple-serialize.md#merkleization
//BeaconBlockHeader Spec: https://github.com/ethereum/consensus-specs/blob/dev/specs/phase0/beacon-chain.md#beaconblockheader
//BeaconState Spec: https://github.com/ethereum/consensus-specs/blob/dev/specs/phase0/beacon-chain.md#beaconstate
library BeaconChainProofs {
    /// @notice Heights of various merkle trees in the beacon chain
    /// - beaconBlockRoot
    /// |                                             HEIGHT: BEACON_BLOCK_HEADER_TREE_HEIGHT
    /// -- beaconStateRoot
    /// |                                             HEIGHT: BEACON_STATE_TREE_HEIGHT
    /// validatorContainerRoot, balanceContainerRoot
    /// |                       |                     HEIGHT: BALANCE_TREE_HEIGHT
    /// |                       individual balances
    /// |                                             HEIGHT: VALIDATOR_TREE_HEIGHT
    /// individual validators
    uint256 internal constant BEACON_BLOCK_HEADER_TREE_HEIGHT = 3;
    uint256 internal constant BEACON_STATE_TREE_HEIGHT = 5;
    uint256 internal constant BALANCE_TREE_HEIGHT = 38;
    uint256 internal constant VALIDATOR_TREE_HEIGHT = 40;

    /// @notice Index of the beaconStateRoot in the `BeaconBlockHeader` container
    ///
    /// BeaconBlockHeader = [..., state_root, ...]
    ///                      0...      3
    ///
    /// (See https://github.com/ethereum/consensus-specs/blob/dev/specs/phase0/beacon-chain.md#beaconblockheader)
    uint256 internal constant STATE_ROOT_INDEX = 3;

    /// @notice Indices for fields in the `BeaconState` container
    ///
    /// BeaconState = [..., validators, balances, ...]
    ///                0...     11         12
    ///
    /// (See https://github.com/ethereum/consensus-specs/blob/dev/specs/capella/beacon-chain.md#beaconstate)
    uint256 internal constant VALIDATOR_CONTAINER_INDEX = 11;
    uint256 internal constant BALANCE_CONTAINER_INDEX = 12;

    /// @notice Number of fields in the `Validator` container
    /// (See https://github.com/ethereum/consensus-specs/blob/dev/specs/phase0/beacon-chain.md#validator)
    uint256 internal constant VALIDATOR_FIELDS_LENGTH = 8;

    /// @notice Indices for fields in the `Validator` container
    uint256 internal constant VALIDATOR_PUBKEY_INDEX = 0;
    uint256 internal constant VALIDATOR_WITHDRAWAL_CREDENTIALS_INDEX = 1;
    uint256 internal constant VALIDATOR_BALANCE_INDEX = 2;
    uint256 internal constant VALIDATOR_SLASHED_INDEX = 3;
    uint256 internal constant VALIDATOR_ACTIVATION_EPOCH_INDEX = 5;
    uint256 internal constant VALIDATOR_EXIT_EPOCH_INDEX = 6;

    /// @notice Slot/Epoch timings
    uint64 internal constant SECONDS_PER_SLOT = 12;
    uint64 internal constant SLOTS_PER_EPOCH = 32;
    uint64 internal constant SECONDS_PER_EPOCH = SLOTS_PER_EPOCH * SECONDS_PER_SLOT;

    /// @notice `FAR_FUTURE_EPOCH` is used as the default value for certain `Validator`
    /// fields when a `Validator` is first created on the beacon chain
    uint64 internal constant FAR_FUTURE_EPOCH = type(uint64).max;
    bytes8 internal constant UINT64_MASK = 0xffffffffffffffff;

    /// @notice Contains a beacon state root and a merkle proof verifying its inclusion under a beacon block root
    struct StateRootProof {
        bytes32 beaconStateRoot;
        bytes proof;
    }

    /// @notice Contains a validator's fields and a merkle proof of their inclusion under a beacon state root
    struct ValidatorProof {
        bytes32[] validatorFields;
        bytes proof;
    }

    /// @notice Contains a beacon balance container root and a proof of this root under a beacon block root
    struct BalanceContainerProof {
        bytes32 balanceContainerRoot;
        bytes proof;
    }

    /// @notice Contains a validator balance root and a proof of its inclusion under a balance container root
    struct BalanceProof {
        bytes32 pubkeyHash;
        bytes32 balanceRoot;
        bytes proof;
    }

    /**
     *
     *              VALIDATOR FIELDS -> BEACON STATE ROOT -> BEACON BLOCK ROOT
     *
     */

    /// @notice Verify a merkle proof of the beacon state root against a beacon block root
    /// @param beaconBlockRoot merkle root of the beacon block
    /// @param proof the beacon state root and merkle proof of its inclusion under `beaconBlockRoot`
    function verifyStateRoot(bytes32 beaconBlockRoot, StateRootProof calldata proof) internal view {
        require(
            proof.proof.length == 32 * (BEACON_BLOCK_HEADER_TREE_HEIGHT),
            "BeaconChainProofs.verifyStateRoot: Proof has incorrect length"
        );

        /// This merkle proof verifies the `beaconStateRoot` under the `beaconBlockRoot`
        /// - beaconBlockRoot
        /// |                            HEIGHT: BEACON_BLOCK_HEADER_TREE_HEIGHT
        /// -- beaconStateRoot
        require(
            Merkle.verifyInclusionSha256({
                proof: proof.proof,
                root: beaconBlockRoot,
                leaf: proof.beaconStateRoot,
                index: STATE_ROOT_INDEX
            }),
            "BeaconChainProofs.verifyStateRoot: Invalid state root merkle proof"
        );
    }

    /// @notice Verify a merkle proof of a validator container against a `beaconStateRoot`
    /// @dev This proof starts at a validator's container root, proves through the validator container root,
    /// and continues proving to the root of the `BeaconState`
    /// @dev See https://eth2book.info/capella/part3/containers/dependencies/#validator for info on `Validator` containers
    /// @dev See https://eth2book.info/capella/part3/containers/state/#beaconstate for info on `BeaconState` containers
    /// @param beaconStateRoot merkle root of the `BeaconState` container
    /// @param validatorFields an individual validator's fields. These are merklized to form a `validatorRoot`,
    /// which is used as the leaf to prove against `beaconStateRoot`
    /// @param validatorFieldsProof a merkle proof of inclusion of `validatorFields` under `beaconStateRoot`
    /// @param validatorIndex the validator's unique index
    function verifyValidatorFields(
        bytes32 beaconStateRoot,
        bytes32[] calldata validatorFields,
        bytes calldata validatorFieldsProof,
        uint40 validatorIndex
    ) internal view {
        require(
            validatorFields.length == VALIDATOR_FIELDS_LENGTH,
            "BeaconChainProofs.verifyValidatorFields: Validator fields has incorrect length"
        );

        /// Note: the reason we use `VALIDATOR_TREE_HEIGHT + 1` here is because the merklization process for
        /// this container includes hashing the root of the validator tree with the length of the validator list
        require(
            validatorFieldsProof.length == 32 * ((VALIDATOR_TREE_HEIGHT + 1) + BEACON_STATE_TREE_HEIGHT),
            "BeaconChainProofs.verifyValidatorFields: Proof has incorrect length"
        );

        // Merkleize `validatorFields` to get the leaf to prove
        bytes32 validatorRoot = Merkle.merkleizeSha256(validatorFields);

        /// This proof combines two proofs, so its index accounts for the relative position of leaves in two trees:
        /// - beaconStateRoot
        /// |                            HEIGHT: BEACON_STATE_TREE_HEIGHT
        /// -- validatorContainerRoot
        /// |                            HEIGHT: VALIDATOR_TREE_HEIGHT + 1
        /// ---- validatorRoot
        uint256 index = (VALIDATOR_CONTAINER_INDEX << (VALIDATOR_TREE_HEIGHT + 1)) | uint256(validatorIndex);

        require(
            Merkle.verifyInclusionSha256({
                proof: validatorFieldsProof,
                root: beaconStateRoot,
                leaf: validatorRoot,
                index: index
            }),
            "BeaconChainProofs.verifyValidatorFields: Invalid merkle proof"
        );
    }

    /**
     *
     *          VALIDATOR BALANCE -> BALANCE CONTAINER ROOT -> BEACON BLOCK ROOT
     *
     */

    /// @notice Verify a merkle proof of the beacon state's balances container against the beacon block root
    /// @dev This proof starts at the balance container root, proves through the beacon state root, and
    /// continues proving through the beacon block root. As a result, this proof will contain elements
    /// of a `StateRootProof` under the same block root, with the addition of proving the balances field
    /// within the beacon state.
    /// @dev This is used to make checkpoint proofs more efficient, as a checkpoint will verify multiple balances
    /// against the same balance container root.
    /// @param beaconBlockRoot merkle root of the beacon block
    /// @param proof a beacon balance container root and merkle proof of its inclusion under `beaconBlockRoot`
    function verifyBalanceContainer(bytes32 beaconBlockRoot, BalanceContainerProof calldata proof) internal view {
        require(
            proof.proof.length == 32 * (BEACON_BLOCK_HEADER_TREE_HEIGHT + BEACON_STATE_TREE_HEIGHT),
            "BeaconChainProofs.verifyBalanceContainer: Proof has incorrect length"
        );

        /// This proof combines two proofs, so its index accounts for the relative position of leaves in two trees:
        /// - beaconBlockRoot
        /// |                            HEIGHT: BEACON_BLOCK_HEADER_TREE_HEIGHT
        /// -- beaconStateRoot
        /// |                            HEIGHT: BEACON_STATE_TREE_HEIGHT
        /// ---- balancesContainerRoot
        uint256 index = (STATE_ROOT_INDEX << (BEACON_STATE_TREE_HEIGHT)) | BALANCE_CONTAINER_INDEX;

        require(
            Merkle.verifyInclusionSha256({
                proof: proof.proof,
                root: beaconBlockRoot,
                leaf: proof.balanceContainerRoot,
                index: index
            }),
            "BeaconChainProofs.verifyBalanceContainer: invalid balance container proof"
        );
    }

    /// @notice Verify a merkle proof of a validator's balance against the beacon state's `balanceContainerRoot`
    /// @param balanceContainerRoot the merkle root of all validators' current balances
    /// @param validatorIndex the index of the validator whose balance we are proving
    /// @param proof the validator's associated balance root and a merkle proof of inclusion under `balanceContainerRoot`
    /// @return validatorBalanceGwei the validator's current balance (in gwei)
    function verifyValidatorBalance(
        bytes32 balanceContainerRoot,
        uint40 validatorIndex,
        BalanceProof calldata proof
    ) internal view returns (uint64 validatorBalanceGwei) {
        /// Note: the reason we use `BALANCE_TREE_HEIGHT + 1` here is because the merklization process for
        /// this container includes hashing the root of the balances tree with the length of the balances list
        require(
            proof.proof.length == 32 * (BALANCE_TREE_HEIGHT + 1),
            "BeaconChainProofs.verifyValidatorBalance: Proof has incorrect length"
        );

        /// When merkleized, beacon chain balances are combined into groups of 4 called a `balanceRoot`. The merkle
        /// proof here verifies that this validator's `balanceRoot` is included in the `balanceContainerRoot`
        /// - balanceContainerRoot
        /// |                            HEIGHT: BALANCE_TREE_HEIGHT
        /// -- balanceRoot
        uint256 balanceIndex = uint256(validatorIndex / 4);

        require(
            Merkle.verifyInclusionSha256({
                proof: proof.proof,
                root: balanceContainerRoot,
                leaf: proof.balanceRoot,
                index: balanceIndex
            }),
            "BeaconChainProofs.verifyValidatorBalance: Invalid merkle proof"
        );

        /// Extract the individual validator's balance from the `balanceRoot`
        return getBalanceAtIndex(proof.balanceRoot, validatorIndex);
    }

    /**
     * @notice Parses a balanceRoot to get the uint64 balance of a validator.
     * @dev During merkleization of the beacon state balance tree, four uint64 values are treated as a single
     * leaf in the merkle tree. We use validatorIndex % 4 to determine which of the four uint64 values to
     * extract from the balanceRoot.
     * @param balanceRoot is the combination of 4 validator balances being proven for
     * @param validatorIndex is the index of the validator being proven for
     * @return The validator's balance, in Gwei
     */
    function getBalanceAtIndex(bytes32 balanceRoot, uint40 validatorIndex) internal pure returns (uint64) {
        uint256 bitShiftAmount = (validatorIndex % 4) * 64;
        return Endian.fromLittleEndianUint64(bytes32((uint256(balanceRoot) << bitShiftAmount)));
    }

    /// @notice Indices for fields in the `Validator` container:
    /// 0: pubkey
    /// 1: withdrawal credentials
    /// 2: effective balance
    /// 3: slashed?
    /// 4: activation eligibility epoch
    /// 5: activation epoch
    /// 6: exit epoch
    /// 7: withdrawable epoch
    ///
    /// (See https://github.com/ethereum/consensus-specs/blob/dev/specs/phase0/beacon-chain.md#validator)

    /// @dev Retrieves a validator's pubkey hash
    function getPubkeyHash(bytes32[] memory validatorFields) internal pure returns (bytes32) {
        return validatorFields[VALIDATOR_PUBKEY_INDEX];
    }

    /// @dev Retrieves a validator's withdrawal credentials
    function getWithdrawalCredentials(bytes32[] memory validatorFields) internal pure returns (bytes32) {
        return validatorFields[VALIDATOR_WITHDRAWAL_CREDENTIALS_INDEX];
    }

    /// @dev Retrieves a validator's effective balance (in gwei)
    function getEffectiveBalanceGwei(bytes32[] memory validatorFields) internal pure returns (uint64) {
        return Endian.fromLittleEndianUint64(validatorFields[VALIDATOR_BALANCE_INDEX]);
    }

    /// @dev Retrieves a validator's activation epoch
    function getActivationEpoch(bytes32[] memory validatorFields) internal pure returns (uint64) {
        return Endian.fromLittleEndianUint64(validatorFields[VALIDATOR_ACTIVATION_EPOCH_INDEX]);
    }

    /// @dev Retrieves true IFF a validator is marked slashed
    function isValidatorSlashed(bytes32[] memory validatorFields) internal pure returns (bool) {
        return validatorFields[VALIDATOR_SLASHED_INDEX] != 0;
    }

    /// @dev Retrieves a validator's exit epoch
    function getExitEpoch(bytes32[] memory validatorFields) internal pure returns (uint64) {
        return Endian.fromLittleEndianUint64(validatorFields[VALIDATOR_EXIT_EPOCH_INDEX]);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC-20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../token/ERC20/IERC20.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;
import {Initializable} from "../proxy/utils/Initializable.sol";

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }

    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;

/**
 * @dev Standard ERC-20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC-721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in ERC-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC-1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.20;

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```solidity
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 *
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Storage of the initializable contract.
     *
     * It's implemented on a custom ERC-7201 namespace to reduce the risk of storage collisions
     * when using with upgradeable contracts.
     *
     * @custom:storage-location erc7201:openzeppelin.storage.Initializable
     */
    struct InitializableStorage {
        /**
         * @dev Indicates that the contract has been initialized.
         */
        uint64 _initialized;
        /**
         * @dev Indicates that the contract is in the process of being initialized.
         */
        bool _initializing;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Initializable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant INITIALIZABLE_STORAGE = 0xf0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00;

    /**
     * @dev The contract is already initialized.
     */
    error InvalidInitialization();

    /**
     * @dev The contract is not initializing.
     */
    error NotInitializing();

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint64 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that in the context of a constructor an `initializer` may be invoked any
     * number of times. This behavior in the constructor can be useful during testing and is not expected to be used in
     * production.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        // Cache values to avoid duplicated sloads
        bool isTopLevelCall = !$._initializing;
        uint64 initialized = $._initialized;

        // Allowed calls:
        // - initialSetup: the contract is not in the initializing state and no previous version was
        //                 initialized
        // - construction: the contract is initialized at version 1 (no reininitialization) and the
        //                 current contract is just being deployed
        bool initialSetup = initialized == 0 && isTopLevelCall;
        bool construction = initialized == 1 && address(this).code.length == 0;

        if (!initialSetup && !construction) {
            revert InvalidInitialization();
        }
        $._initialized = 1;
        if (isTopLevelCall) {
            $._initializing = true;
        }
        _;
        if (isTopLevelCall) {
            $._initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: Setting the version to 2**64 - 1 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint64 version) {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing || $._initialized >= version) {
            revert InvalidInitialization();
        }
        $._initialized = version;
        $._initializing = true;
        _;
        $._initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        _checkInitializing();
        _;
    }

    /**
     * @dev Reverts if the contract is not in an initializing state. See {onlyInitializing}.
     */
    function _checkInitializing() internal view virtual {
        if (!_isInitializing()) {
            revert NotInitializing();
        }
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing) {
            revert InvalidInitialization();
        }
        if ($._initialized != type(uint64).max) {
            $._initialized = type(uint64).max;
            emit Initialized(type(uint64).max);
        }
    }

    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint64) {
        return _getInitializableStorage()._initialized;
    }

    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _getInitializableStorage()._initializing;
    }

    /**
     * @dev Returns a pointer to the storage namespace.
     */
    // solhint-disable-next-line var-name-mixedcase
    function _getInitializableStorage() private pure returns (InitializableStorage storage $) {
        assembly {
            $.slot := INITIALIZABLE_STORAGE
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/IAccessControl.sol)

pragma solidity ^0.8.20;

/**
 * @dev External interface of AccessControl declared to support ERC-165 detection.
 */
interface IAccessControl {
    /**
     * @dev The `account` is missing a role.
     */
    error AccessControlUnauthorizedAccount(address account, bytes32 neededRole);

    /**
     * @dev The caller of a function is not the expected one.
     *
     * NOTE: Don't confuse with {AccessControlUnauthorizedAccount}.
     */
    error AccessControlBadConfirmation();

    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call. This account bears the admin role (for the granted role).
     * Expected in cases where the role was granted using the internal {AccessControl-_grantRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `callerConfirmation`.
     */
    function renounceRole(bytes32 role, address callerConfirmation) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)

pragma solidity ^0.8.20;

import {IERC165} from "@openzeppelin/contracts/utils/introspection/IERC165.sol";
import {Initializable} from "../../proxy/utils/Initializable.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC-165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 */
abstract contract ERC165Upgradeable is Initializable, IERC165 {
    function __ERC165_init() internal onlyInitializing {
    }

    function __ERC165_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;

/**
 * @title Interface for the `PauserRegistry` contract.
 * @author Layr Labs, Inc.
 * @notice Terms of Service: https://docs.eigenlayer.xyz/overview/terms-of-service
 */
interface IPauserRegistry {
    event PauserStatusChanged(address pauser, bool canPause);

    event UnpauserChanged(address previousUnpauser, address newUnpauser);

    /// @notice Mapping of addresses to whether they hold the pauser role.
    function isPauser(address pauser) external view returns (bool);

    /// @notice Unique address that holds the unpauser role. Capable of changing *both* the pauser and unpauser addresses.
    function unpauser() external view returns (address);
}

// SPDX-License-Identifier: MIT
// Adapted from OpenZeppelin Contracts (last updated v4.8.0) (utils/cryptography/MerkleProof.sol)

pragma solidity ^0.8.0;

/**
 * @dev These functions deal with verification of Merkle Tree proofs.
 *
 * The tree and the proofs can be generated using our
 * https://github.com/OpenZeppelin/merkle-tree[JavaScript library].
 * You will find a quickstart guide in the readme.
 *
 * WARNING: You should avoid using leaf values that are 64 bytes long prior to
 * hashing, or use a hash function other than keccak256 for hashing leaves.
 * This is because the concatenation of a sorted pair of internal nodes in
 * the merkle tree could be reinterpreted as a leaf value.
 * OpenZeppelin's JavaScript library generates merkle trees that are safe
 * against this attack out of the box.
 */
library Merkle {
    /**
     * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up
     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
     * hash matches the root of the tree. The tree is built assuming `leaf` is
     * the 0 indexed `index`'th leaf from the bottom left of the tree.
     *
     * Note this is for a Merkle tree using the keccak/sha3 hash function
     */
    function verifyInclusionKeccak(
        bytes memory proof,
        bytes32 root,
        bytes32 leaf,
        uint256 index
    ) internal pure returns (bool) {
        return processInclusionProofKeccak(proof, leaf, index) == root;
    }

    /**
     * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up
     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
     * hash matches the root of the tree. The tree is built assuming `leaf` is
     * the 0 indexed `index`'th leaf from the bottom left of the tree.
     * @dev If the proof length is 0 then the leaf hash is returned.
     *
     * _Available since v4.4._
     *
     * Note this is for a Merkle tree using the keccak/sha3 hash function
     */
    function processInclusionProofKeccak(
        bytes memory proof,
        bytes32 leaf,
        uint256 index
    ) internal pure returns (bytes32) {
        require(proof.length % 32 == 0, "Merkle.processInclusionProofKeccak: proof length should be a multiple of 32");
        bytes32 computedHash = leaf;
        for (uint256 i = 32; i <= proof.length; i += 32) {
            if (index % 2 == 0) {
                // if ith bit of index is 0, then computedHash is a left sibling
                assembly {
                    mstore(0x00, computedHash)
                    mstore(0x20, mload(add(proof, i)))
                    computedHash := keccak256(0x00, 0x40)
                    index := div(index, 2)
                }
            } else {
                // if ith bit of index is 1, then computedHash is a right sibling
                assembly {
                    mstore(0x00, mload(add(proof, i)))
                    mstore(0x20, computedHash)
                    computedHash := keccak256(0x00, 0x40)
                    index := div(index, 2)
                }
            }
        }
        return computedHash;
    }

    /**
     * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up
     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
     * hash matches the root of the tree. The tree is built assuming `leaf` is
     * the 0 indexed `index`'th leaf from the bottom left of the tree.
     *
     * Note this is for a Merkle tree using the sha256 hash function
     */
    function verifyInclusionSha256(
        bytes memory proof,
        bytes32 root,
        bytes32 leaf,
        uint256 index
    ) internal view returns (bool) {
        return processInclusionProofSha256(proof, leaf, index) == root;
    }

    /**
     * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up
     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
     * hash matches the root of the tree. The tree is built assuming `leaf` is
     * the 0 indexed `index`'th leaf from the bottom left of the tree.
     *
     * _Available since v4.4._
     *
     * Note this is for a Merkle tree using the sha256 hash function
     */
    function processInclusionProofSha256(
        bytes memory proof,
        bytes32 leaf,
        uint256 index
    ) internal view returns (bytes32) {
        require(
            proof.length != 0 && proof.length % 32 == 0,
            "Merkle.processInclusionProofSha256: proof length should be a non-zero multiple of 32"
        );
        bytes32[1] memory computedHash = [leaf];
        for (uint256 i = 32; i <= proof.length; i += 32) {
            if (index % 2 == 0) {
                // if ith bit of index is 0, then computedHash is a left sibling
                assembly {
                    mstore(0x00, mload(computedHash))
                    mstore(0x20, mload(add(proof, i)))
                    if iszero(staticcall(sub(gas(), 2000), 2, 0x00, 0x40, computedHash, 0x20)) { revert(0, 0) }
                    index := div(index, 2)
                }
            } else {
                // if ith bit of index is 1, then computedHash is a right sibling
                assembly {
                    mstore(0x00, mload(add(proof, i)))
                    mstore(0x20, mload(computedHash))
                    if iszero(staticcall(sub(gas(), 2000), 2, 0x00, 0x40, computedHash, 0x20)) { revert(0, 0) }
                    index := div(index, 2)
                }
            }
        }
        return computedHash[0];
    }

    /**
     * @notice this function returns the merkle root of a tree created from a set of leaves using sha256 as its hash function
     *  @param leaves the leaves of the merkle tree
     *  @return The computed Merkle root of the tree.
     *  @dev A pre-condition to this function is that leaves.length is a power of two.  If not, the function will merkleize the inputs incorrectly.
     */
    function merkleizeSha256(bytes32[] memory leaves) internal pure returns (bytes32) {
        //there are half as many nodes in the layer above the leaves
        uint256 numNodesInLayer = leaves.length / 2;
        //create a layer to store the internal nodes
        bytes32[] memory layer = new bytes32[](numNodesInLayer);
        //fill the layer with the pairwise hashes of the leaves
        for (uint256 i = 0; i < numNodesInLayer; i++) {
            layer[i] = sha256(abi.encodePacked(leaves[2 * i], leaves[2 * i + 1]));
        }
        //the next layer above has half as many nodes
        numNodesInLayer /= 2;
        //while we haven't computed the root
        while (numNodesInLayer != 0) {
            //overwrite the first numNodesInLayer nodes in layer with the pairwise hashes of their children
            for (uint256 i = 0; i < numNodesInLayer; i++) {
                layer[i] = sha256(abi.encodePacked(layer[2 * i], layer[2 * i + 1]));
            }
            //the next layer above has half as many nodes
            numNodesInLayer /= 2;
        }
        //the first node in the layer is the root
        return layer[0];
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;

library Endian {
    /**
     * @notice Converts a little endian-formatted uint64 to a big endian-formatted uint64
     * @param lenum little endian-formatted uint64 input, provided as 'bytes32' type
     * @return n The big endian-formatted uint64
     * @dev Note that the input is formatted as a 'bytes32' type (i.e. 256 bits), but it is immediately truncated to a uint64 (i.e. 64 bits)
     * through a right-shift/shr operation.
     */
    function fromLittleEndianUint64(bytes32 lenum) internal pure returns (uint64 n) {
        // the number needs to be stored in little-endian encoding (ie in bytes 0-8)
        n = uint64(uint256(lenum >> 192));
        // forgefmt: disable-next-item
        return (n >> 56) | 
            ((0x00FF000000000000 & n) >> 40) | 
            ((0x0000FF0000000000 & n) >> 24) | 
            ((0x000000FF00000000 & n) >> 8)  | 
            ((0x00000000FF000000 & n) << 8)  | 
            ((0x0000000000FF0000 & n) << 24) | 
            ((0x000000000000FF00 & n) << 40) | 
            ((0x00000000000000FF & n) << 56);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC-165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[ERC].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[ERC section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

{
  "remappings": [
    "@openzeppelin-upgrades/=lib/eigenlayer-contracts/lib/openzeppelin-contracts-upgradeable/",
    "@openzeppelin/=lib/openzeppelin-contracts/",
    "@eigenlayer/=lib/eigenlayer-contracts/",
    "@openzeppelin-upgrades-v4.9.0/=lib/eigenlayer-contracts/lib/openzeppelin-contracts-upgradeable-v4.9.0/",
    "@openzeppelin-v4.9.0/=lib/eigenlayer-contracts/lib/openzeppelin-contracts-v4.9.0/",
    "@openzeppelin/contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/contracts/",
    "@openzeppelin/contracts/=lib/openzeppelin-contracts/contracts/",
    "ds-test/=lib/forge-std/lib/ds-test/src/",
    "eigenlayer-contracts/=lib/eigenlayer-contracts/",
    "erc4626-tests/=lib/openzeppelin-contracts-upgradeable/lib/erc4626-tests/",
    "forge-std/=lib/forge-std/src/",
    "halmos-cheatcodes/=lib/openzeppelin-contracts-upgradeable/lib/halmos-cheatcodes/src/",
    "openzeppelin-contracts-upgradeable-v4.9.0/=lib/eigenlayer-contracts/lib/openzeppelin-contracts-upgradeable-v4.9.0/",
    "openzeppelin-contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/",
    "openzeppelin-contracts-v4.9.0/=lib/eigenlayer-contracts/lib/openzeppelin-contracts-v4.9.0/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/",
    "openzeppelin/=lib/eigenlayer-contracts/lib/openzeppelin-contracts-upgradeable-v4.9.0/contracts/",
    "safe-smart-account/=lib/safe-smart-account/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "cancun",
  "viaIR": false,
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"AccessControlBadConfirmation","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"bytes32","name":"neededRole","type":"bytes32"}],"name":"AccessControlUnauthorizedAccount","type":"error"},{"inputs":[{"internalType":"address","name":"caller","type":"address"}],"name":"CallerNotAuthorized","type":"error"},{"inputs":[{"internalType":"address","name":"expected","type":"address"},{"internalType":"address","name":"provided","type":"address"}],"name":"CallerNotStakingNodeManager","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"allowance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientAllowance","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"balance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientBalance","type":"error"},{"inputs":[{"internalType":"address","name":"approver","type":"address"}],"name":"ERC20InvalidApprover","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC20InvalidReceiver","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"ERC20InvalidSender","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"}],"name":"ERC20InvalidSpender","type":"error"},{"inputs":[],"name":"InsufficientBalance","type":"error"},{"inputs":[],"name":"InvalidInitialization","type":"error"},{"inputs":[],"name":"NoDirectETHDeposit","type":"error"},{"inputs":[],"name":"NotInitializing","type":"error"},{"inputs":[{"internalType":"address","name":"caller","type":"address"}],"name":"NotRewardsDistributor","type":"error"},{"inputs":[],"name":"Paused","type":"error"},{"inputs":[],"name":"TransferFailed","type":"error"},{"inputs":[],"name":"TransfersPaused","type":"error"},{"inputs":[],"name":"ZeroAddress","type":"error"},{"inputs":[],"name":"ZeroETH","type":"error"},{"inputs":[],"name":"ZeroShares","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"sender","type":"address"},{"indexed":true,"internalType":"address","name":"receiver","type":"address"},{"indexed":false,"internalType":"uint256","name":"assets","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"shares","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"totalDepositedInPool","type":"uint256"}],"name":"Deposit","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"bool","name":"isPaused","type":"bool"}],"name":"DepositETHPausedUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"ethAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"totalDepositedInPool","type":"uint256"}],"name":"ETHWithdrawn","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint64","name":"version","type":"uint64"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":false,"internalType":"bool","name":"isWhitelisted","type":"bool"}],"name":"PauseWhitelistUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"totalDepositedInPool","type":"uint256"}],"name":"RewardsReceived","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[],"name":"TransfersUnpaused","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"ethAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"totalDepositedInPool","type":"uint256"}],"name":"WithdrawnETHProcessed","type":"event"},{"inputs":[],"name":"BURNER_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"PAUSER_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"UNPAUSER_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address[]","name":"whitelistedForTransfers","type":"address[]"}],"name":"addToPauseWhitelist","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"}],"name":"convertToAssets","outputs":[{"internalType":"uint256","name":"assets","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"assets","type":"uint256"}],"name":"convertToShares","outputs":[{"internalType":"uint256","name":"shares","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"depositETH","outputs":[{"internalType":"uint256","name":"shares","type":"uint256"}],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"depositsPaused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"address","name":"admin","type":"address"},{"internalType":"address","name":"pauser","type":"address"},{"internalType":"address","name":"unpauser","type":"address"},{"internalType":"contract IStakingNodesManager","name":"stakingNodesManager","type":"address"},{"internalType":"contract IRewardsDistributor","name":"rewardsDistributor","type":"address"},{"internalType":"address[]","name":"pauseWhitelist","type":"address[]"}],"internalType":"struct ynETH.Init","name":"init","type":"tuple"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pauseDeposits","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"addr","type":"address"}],"name":"pauseWhiteList","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"assets","type":"uint256"}],"name":"previewDeposit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"}],"name":"previewRedeem","outputs":[{"internalType":"uint256","name":"assets","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"processWithdrawnETH","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"receiveRewards","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address[]","name":"unlisted","type":"address[]"}],"name":"removeFromPauseWhitelist","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"callerConfirmation","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"rewardsDistributor","outputs":[{"internalType":"contract IRewardsDistributor","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"stakingNodesManager","outputs":[{"internalType":"contract IStakingNodesManager","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalAssets","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalDepositedInPool","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"unpauseDeposits","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"unpauseTransfers","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"ethAmount","type":"uint256"}],"name":"withdrawETH","outputs":[],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]

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