Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IERC20} from '../dependencies/openzeppelin/contracts/IERC20.sol';
import {WadRayMath} from '../protocol/libraries/math/WadRayMath.sol';
import {PercentageMath} from '../protocol/libraries/math/PercentageMath.sol';
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';
import {Errors} from '../protocol/libraries/helpers/Errors.sol';
import {IDefaultInterestRateStrategyV2} from '../interfaces/IDefaultInterestRateStrategyV2.sol';
import {IReserveInterestRateStrategy} from '../interfaces/IReserveInterestRateStrategy.sol';
import {IPoolAddressesProvider} from '../interfaces/IPoolAddressesProvider.sol';

/**
 * @title DefaultReserveInterestRateStrategyV2 contract
 * @author BGD Labs
 * @notice Default interest rate strategy used by the Aave protocol
 * @dev Strategies are pool-specific: each contract CAN'T be used across different Aave pools
 *   due to the caching of the PoolAddressesProvider and the usage of underlying addresses as
 *   index of the _interestRateData
 */
contract DefaultReserveInterestRateStrategyV2 is IDefaultInterestRateStrategyV2 {
  using WadRayMath for uint256;
  using PercentageMath for uint256;

  struct CalcInterestRatesLocalVars {
    uint256 availableLiquidity;
    uint256 currentVariableBorrowRate;
    uint256 currentLiquidityRate;
    uint256 borrowUsageRatio;
    uint256 supplyUsageRatio;
    uint256 availableLiquidityPlusDebt;
  }

  /// @inheritdoc IDefaultInterestRateStrategyV2
  IPoolAddressesProvider public immutable ADDRESSES_PROVIDER;

  /// @inheritdoc IDefaultInterestRateStrategyV2
  uint256 public constant MAX_BORROW_RATE = 1000_00;

  /// @inheritdoc IDefaultInterestRateStrategyV2
  uint256 public constant MIN_OPTIMAL_POINT = 1_00;

  /// @inheritdoc IDefaultInterestRateStrategyV2
  uint256 public constant MAX_OPTIMAL_POINT = 99_00;

  /// @dev Map of reserves address and their interest rate data (reserveAddress => interestRateData)
  mapping(address => InterestRateData) internal _interestRateData;

  modifier onlyPoolConfigurator() {
    require(
      msg.sender == ADDRESSES_PROVIDER.getPoolConfigurator(),
      Errors.CALLER_NOT_POOL_CONFIGURATOR
    );
    _;
  }

  /**
   * @dev Constructor.
   * @param provider The address of the PoolAddressesProvider of the associated Aave pool
   */
  constructor(address provider) {
    require(provider != address(0), Errors.INVALID_ADDRESSES_PROVIDER);
    ADDRESSES_PROVIDER = IPoolAddressesProvider(provider);
  }

  /// @inheritdoc IReserveInterestRateStrategy
  function setInterestRateParams(
    address reserve,
    bytes calldata rateData
  ) external onlyPoolConfigurator {
    _setInterestRateParams(reserve, abi.decode(rateData, (InterestRateData)));
  }

  /// @inheritdoc IDefaultInterestRateStrategyV2
  function setInterestRateParams(
    address reserve,
    InterestRateData calldata rateData
  ) external onlyPoolConfigurator {
    _setInterestRateParams(reserve, rateData);
  }

  /// @inheritdoc IDefaultInterestRateStrategyV2
  function getInterestRateData(address reserve) external view returns (InterestRateDataRay memory) {
    return _rayifyRateData(_interestRateData[reserve]);
  }

  /// @inheritdoc IDefaultInterestRateStrategyV2
  function getInterestRateDataBps(address reserve) external view returns (InterestRateData memory) {
    return _interestRateData[reserve];
  }

  /// @inheritdoc IDefaultInterestRateStrategyV2
  function getOptimalUsageRatio(address reserve) external view returns (uint256) {
    return _bpsToRay(uint256(_interestRateData[reserve].optimalUsageRatio));
  }

  /// @inheritdoc IDefaultInterestRateStrategyV2
  function getVariableRateSlope1(address reserve) external view returns (uint256) {
    return _bpsToRay(uint256(_interestRateData[reserve].variableRateSlope1));
  }

  /// @inheritdoc IDefaultInterestRateStrategyV2
  function getVariableRateSlope2(address reserve) external view returns (uint256) {
    return _bpsToRay(uint256(_interestRateData[reserve].variableRateSlope2));
  }

  /// @inheritdoc IDefaultInterestRateStrategyV2
  function getBaseVariableBorrowRate(address reserve) external view override returns (uint256) {
    return _bpsToRay(uint256(_interestRateData[reserve].baseVariableBorrowRate));
  }

  /// @inheritdoc IDefaultInterestRateStrategyV2
  function getMaxVariableBorrowRate(address reserve) external view override returns (uint256) {
    return
      _bpsToRay(
        uint256(
          _interestRateData[reserve].baseVariableBorrowRate +
            _interestRateData[reserve].variableRateSlope1 +
            _interestRateData[reserve].variableRateSlope2
        )
      );
  }

  /// @inheritdoc IReserveInterestRateStrategy
  function calculateInterestRates(
    DataTypes.CalculateInterestRatesParams memory params
  ) external view virtual override returns (uint256, uint256) {
    InterestRateDataRay memory rateData = _rayifyRateData(_interestRateData[params.reserve]);

    // @note This is a short circuit to allow mintable assets (ex. GHO), which by definition cannot be supplied
    // and thus do not use virtual underlying balances.
    if (!params.usingVirtualBalance) {
      return (0, rateData.baseVariableBorrowRate);
    }

    CalcInterestRatesLocalVars memory vars;

    vars.currentLiquidityRate = 0;
    vars.currentVariableBorrowRate = rateData.baseVariableBorrowRate;

    if (params.totalDebt != 0) {
      vars.availableLiquidity =
        params.virtualUnderlyingBalance +
        params.liquidityAdded -
        params.liquidityTaken;

      vars.availableLiquidityPlusDebt = vars.availableLiquidity + params.totalDebt;
      vars.borrowUsageRatio = params.totalDebt.rayDiv(vars.availableLiquidityPlusDebt);
      vars.supplyUsageRatio = params.totalDebt.rayDiv(
        vars.availableLiquidityPlusDebt + params.unbacked
      );
    } else {
      return (0, vars.currentVariableBorrowRate);
    }

    if (vars.borrowUsageRatio > rateData.optimalUsageRatio) {
      uint256 excessBorrowUsageRatio = (vars.borrowUsageRatio - rateData.optimalUsageRatio).rayDiv(
        WadRayMath.RAY - rateData.optimalUsageRatio
      );

      vars.currentVariableBorrowRate +=
        rateData.variableRateSlope1 +
        rateData.variableRateSlope2.rayMul(excessBorrowUsageRatio);
    } else {
      vars.currentVariableBorrowRate += rateData
        .variableRateSlope1
        .rayMul(vars.borrowUsageRatio)
        .rayDiv(rateData.optimalUsageRatio);
    }

    vars.currentLiquidityRate = vars
      .currentVariableBorrowRate
      .rayMul(vars.supplyUsageRatio)
      .percentMul(PercentageMath.PERCENTAGE_FACTOR - params.reserveFactor);

    return (vars.currentLiquidityRate, vars.currentVariableBorrowRate);
  }

  /**
   * @dev Doing validations and data update for an asset
   * @param reserve address of the underlying asset of the reserve
   * @param rateData Encoded reserve interest rate data to apply
   */
  function _setInterestRateParams(address reserve, InterestRateData memory rateData) internal {
    require(reserve != address(0), Errors.ZERO_ADDRESS_NOT_VALID);

    require(
      rateData.optimalUsageRatio <= MAX_OPTIMAL_POINT &&
        rateData.optimalUsageRatio >= MIN_OPTIMAL_POINT,
      Errors.INVALID_OPTIMAL_USAGE_RATIO
    );

    require(
      rateData.variableRateSlope1 <= rateData.variableRateSlope2,
      Errors.SLOPE_2_MUST_BE_GTE_SLOPE_1
    );

    // The maximum rate should not be above certain threshold
    require(
      uint256(rateData.baseVariableBorrowRate) +
        uint256(rateData.variableRateSlope1) +
        uint256(rateData.variableRateSlope2) <=
        MAX_BORROW_RATE,
      Errors.INVALID_MAX_RATE
    );

    _interestRateData[reserve] = rateData;
    emit RateDataUpdate(
      reserve,
      rateData.optimalUsageRatio,
      rateData.baseVariableBorrowRate,
      rateData.variableRateSlope1,
      rateData.variableRateSlope2
    );
  }

  /**
   * @dev Transforms an InterestRateData struct to an InterestRateDataRay struct by multiplying all values
   * by 1e23, turning them into ray values
   *
   * @param data The InterestRateData struct to transform
   *
   * @return The resulting InterestRateDataRay struct
   */
  function _rayifyRateData(
    InterestRateData memory data
  ) internal pure returns (InterestRateDataRay memory) {
    return
      InterestRateDataRay({
        optimalUsageRatio: _bpsToRay(uint256(data.optimalUsageRatio)),
        baseVariableBorrowRate: _bpsToRay(uint256(data.baseVariableBorrowRate)),
        variableRateSlope1: _bpsToRay(uint256(data.variableRateSlope1)),
        variableRateSlope2: _bpsToRay(uint256(data.variableRateSlope2))
      });
  }

  // @dev helper function added here, as generally the protocol doesn't use bps
  function _bpsToRay(uint256 n) internal pure returns (uint256) {
    return n * 1e23;
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);

  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);

  /**
   * @dev Moves `amount` tokens from the caller's account to `recipient`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address recipient, uint256 amount) external returns (bool);

  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(address owner, address spender) external view returns (uint256);

  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);

  /**
   * @dev Moves `amount` tokens from `sender` to `recipient` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);

  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;

/**
 * @title WadRayMath library
 * @author Aave
 * @notice Provides functions to perform calculations with Wad and Ray units
 * @dev Provides mul and div function for wads (decimal numbers with 18 digits of precision) and rays (decimal numbers
 * with 27 digits of precision)
 * @dev Operations are rounded. If a value is >=.5, will be rounded up, otherwise rounded down.
 */
library WadRayMath {
  // HALF_WAD and HALF_RAY expressed with extended notation as constant with operations are not supported in Yul assembly
  uint256 internal constant WAD = 1e18;
  uint256 internal constant HALF_WAD = 0.5e18;

  uint256 internal constant RAY = 1e27;
  uint256 internal constant HALF_RAY = 0.5e27;

  uint256 internal constant WAD_RAY_RATIO = 1e9;

  /**
   * @dev Multiplies two wad, rounding half up to the nearest wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @param b Wad
   * @return c = a*b, in wad
   */
  function wadMul(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - HALF_WAD) / b
    assembly {
      if iszero(or(iszero(b), iszero(gt(a, div(sub(not(0), HALF_WAD), b))))) {
        revert(0, 0)
      }

      c := div(add(mul(a, b), HALF_WAD), WAD)
    }
  }

  /**
   * @dev Divides two wad, rounding half up to the nearest wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @param b Wad
   * @return c = a/b, in wad
   */
  function wadDiv(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - halfB) / WAD
    assembly {
      if or(iszero(b), iszero(iszero(gt(a, div(sub(not(0), div(b, 2)), WAD))))) {
        revert(0, 0)
      }

      c := div(add(mul(a, WAD), div(b, 2)), b)
    }
  }

  /**
   * @notice Multiplies two ray, rounding half up to the nearest ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @param b Ray
   * @return c = a raymul b
   */
  function rayMul(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - HALF_RAY) / b
    assembly {
      if iszero(or(iszero(b), iszero(gt(a, div(sub(not(0), HALF_RAY), b))))) {
        revert(0, 0)
      }

      c := div(add(mul(a, b), HALF_RAY), RAY)
    }
  }

  /**
   * @notice Divides two ray, rounding half up to the nearest ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @param b Ray
   * @return c = a raydiv b
   */
  function rayDiv(uint256 a, uint256 b) internal pure returns (uint256 c) {
    // to avoid overflow, a <= (type(uint256).max - halfB) / RAY
    assembly {
      if or(iszero(b), iszero(iszero(gt(a, div(sub(not(0), div(b, 2)), RAY))))) {
        revert(0, 0)
      }

      c := div(add(mul(a, RAY), div(b, 2)), b)
    }
  }

  /**
   * @dev Casts ray down to wad
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Ray
   * @return b = a converted to wad, rounded half up to the nearest wad
   */
  function rayToWad(uint256 a) internal pure returns (uint256 b) {
    assembly {
      b := div(a, WAD_RAY_RATIO)
      let remainder := mod(a, WAD_RAY_RATIO)
      if iszero(lt(remainder, div(WAD_RAY_RATIO, 2))) {
        b := add(b, 1)
      }
    }
  }

  /**
   * @dev Converts wad up to ray
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param a Wad
   * @return b = a converted in ray
   */
  function wadToRay(uint256 a) internal pure returns (uint256 b) {
    // to avoid overflow, b/WAD_RAY_RATIO == a
    assembly {
      b := mul(a, WAD_RAY_RATIO)

      if iszero(eq(div(b, WAD_RAY_RATIO), a)) {
        revert(0, 0)
      }
    }
  }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;

/**
 * @title PercentageMath library
 * @author Aave
 * @notice Provides functions to perform percentage calculations
 * @dev Percentages are defined by default with 2 decimals of precision (100.00). The precision is indicated by PERCENTAGE_FACTOR
 * @dev Operations are rounded. If a value is >=.5, will be rounded up, otherwise rounded down.
 */
library PercentageMath {
  // Maximum percentage factor (100.00%)
  uint256 internal constant PERCENTAGE_FACTOR = 1e4;

  // Half percentage factor (50.00%)
  uint256 internal constant HALF_PERCENTAGE_FACTOR = 0.5e4;

  /**
   * @notice Executes a percentage multiplication
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param value The value of which the percentage needs to be calculated
   * @param percentage The percentage of the value to be calculated
   * @return result value percentmul percentage
   */
  function percentMul(uint256 value, uint256 percentage) internal pure returns (uint256 result) {
    // to avoid overflow, value <= (type(uint256).max - HALF_PERCENTAGE_FACTOR) / percentage
    assembly {
      if iszero(
        or(
          iszero(percentage),
          iszero(gt(value, div(sub(not(0), HALF_PERCENTAGE_FACTOR), percentage)))
        )
      ) {
        revert(0, 0)
      }

      result := div(add(mul(value, percentage), HALF_PERCENTAGE_FACTOR), PERCENTAGE_FACTOR)
    }
  }

  /**
   * @notice Executes a percentage division
   * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
   * @param value The value of which the percentage needs to be calculated
   * @param percentage The percentage of the value to be calculated
   * @return result value percentdiv percentage
   */
  function percentDiv(uint256 value, uint256 percentage) internal pure returns (uint256 result) {
    // to avoid overflow, value <= (type(uint256).max - halfPercentage) / PERCENTAGE_FACTOR
    assembly {
      if or(
        iszero(percentage),
        iszero(iszero(gt(value, div(sub(not(0), div(percentage, 2)), PERCENTAGE_FACTOR))))
      ) {
        revert(0, 0)
      }

      result := div(add(mul(value, PERCENTAGE_FACTOR), div(percentage, 2)), percentage)
    }
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

library DataTypes {
  /**
   * This exists specifically to maintain the `getReserveData()` interface, since the new, internal
   * `ReserveData` struct includes the reserve's `virtualUnderlyingBalance`.
   */
  struct ReserveDataLegacy {
    //stores the reserve configuration
    ReserveConfigurationMap configuration;
    //the liquidity index. Expressed in ray
    uint128 liquidityIndex;
    //the current supply rate. Expressed in ray
    uint128 currentLiquidityRate;
    //variable borrow index. Expressed in ray
    uint128 variableBorrowIndex;
    //the current variable borrow rate. Expressed in ray
    uint128 currentVariableBorrowRate;
    // DEPRECATED on v3.2.0
    uint128 currentStableBorrowRate;
    //timestamp of last update
    uint40 lastUpdateTimestamp;
    //the id of the reserve. Represents the position in the list of the active reserves
    uint16 id;
    //aToken address
    address aTokenAddress;
    // DEPRECATED on v3.2.0
    address stableDebtTokenAddress;
    //variableDebtToken address
    address variableDebtTokenAddress;
    //address of the interest rate strategy
    address interestRateStrategyAddress;
    //the current treasury balance, scaled
    uint128 accruedToTreasury;
    //the outstanding unbacked aTokens minted through the bridging feature
    uint128 unbacked;
    //the outstanding debt borrowed against this asset in isolation mode
    uint128 isolationModeTotalDebt;
  }

  struct ReserveData {
    //stores the reserve configuration
    ReserveConfigurationMap configuration;
    //the liquidity index. Expressed in ray
    uint128 liquidityIndex;
    //the current supply rate. Expressed in ray
    uint128 currentLiquidityRate;
    //variable borrow index. Expressed in ray
    uint128 variableBorrowIndex;
    //the current variable borrow rate. Expressed in ray
    uint128 currentVariableBorrowRate;
    // DEPRECATED on v3.2.0
    uint128 __deprecatedStableBorrowRate;
    //timestamp of last update
    uint40 lastUpdateTimestamp;
    //the id of the reserve. Represents the position in the list of the active reserves
    uint16 id;
    //timestamp until when liquidations are not allowed on the reserve, if set to past liquidations will be allowed
    uint40 liquidationGracePeriodUntil;
    //aToken address
    address aTokenAddress;
    // DEPRECATED on v3.2.0
    address __deprecatedStableDebtTokenAddress;
    //variableDebtToken address
    address variableDebtTokenAddress;
    //address of the interest rate strategy
    address interestRateStrategyAddress;
    //the current treasury balance, scaled
    uint128 accruedToTreasury;
    //the outstanding unbacked aTokens minted through the bridging feature
    uint128 unbacked;
    //the outstanding debt borrowed against this asset in isolation mode
    uint128 isolationModeTotalDebt;
    //the amount of underlying accounted for by the protocol
    uint128 virtualUnderlyingBalance;
  }

  struct ReserveConfigurationMap {
    //bit 0-15: LTV
    //bit 16-31: Liq. threshold
    //bit 32-47: Liq. bonus
    //bit 48-55: Decimals
    //bit 56: reserve is active
    //bit 57: reserve is frozen
    //bit 58: borrowing is enabled
    //bit 59: DEPRECATED: stable rate borrowing enabled
    //bit 60: asset is paused
    //bit 61: borrowing in isolation mode is enabled
    //bit 62: siloed borrowing enabled
    //bit 63: flashloaning enabled
    //bit 64-79: reserve factor
    //bit 80-115: borrow cap in whole tokens, borrowCap == 0 => no cap
    //bit 116-151: supply cap in whole tokens, supplyCap == 0 => no cap
    //bit 152-167: liquidation protocol fee
    //bit 168-175: DEPRECATED: eMode category
    //bit 176-211: unbacked mint cap in whole tokens, unbackedMintCap == 0 => minting disabled
    //bit 212-251: debt ceiling for isolation mode with (ReserveConfiguration::DEBT_CEILING_DECIMALS) decimals
    //bit 252: virtual accounting is enabled for the reserve
    //bit 253-255 unused

    uint256 data;
  }

  struct UserConfigurationMap {
    /**
     * @dev Bitmap of the users collaterals and borrows. It is divided in pairs of bits, one pair per asset.
     * The first bit indicates if an asset is used as collateral by the user, the second whether an
     * asset is borrowed by the user.
     */
    uint256 data;
  }

  // DEPRECATED: kept for backwards compatibility, might be removed in a future version
  struct EModeCategoryLegacy {
    // each eMode category has a custom ltv and liquidation threshold
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    // DEPRECATED
    address priceSource;
    string label;
  }

  struct CollateralConfig {
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
  }

  struct EModeCategoryBaseConfiguration {
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    string label;
  }

  struct EModeCategory {
    // each eMode category has a custom ltv and liquidation threshold
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    uint128 collateralBitmap;
    string label;
    uint128 borrowableBitmap;
  }

  enum InterestRateMode {
    NONE,
    __DEPRECATED,
    VARIABLE
  }

  struct ReserveCache {
    uint256 currScaledVariableDebt;
    uint256 nextScaledVariableDebt;
    uint256 currLiquidityIndex;
    uint256 nextLiquidityIndex;
    uint256 currVariableBorrowIndex;
    uint256 nextVariableBorrowIndex;
    uint256 currLiquidityRate;
    uint256 currVariableBorrowRate;
    uint256 reserveFactor;
    ReserveConfigurationMap reserveConfiguration;
    address aTokenAddress;
    address variableDebtTokenAddress;
    uint40 reserveLastUpdateTimestamp;
  }

  struct ExecuteLiquidationCallParams {
    uint256 reservesCount;
    uint256 debtToCover;
    address collateralAsset;
    address debtAsset;
    address user;
    bool receiveAToken;
    address priceOracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }

  struct ExecuteSupplyParams {
    address asset;
    uint256 amount;
    address onBehalfOf;
    uint16 referralCode;
  }

  struct ExecuteBorrowParams {
    address asset;
    address user;
    address onBehalfOf;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint16 referralCode;
    bool releaseUnderlying;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }

  struct ExecuteRepayParams {
    address asset;
    uint256 amount;
    InterestRateMode interestRateMode;
    address onBehalfOf;
    bool useATokens;
  }

  struct ExecuteWithdrawParams {
    address asset;
    uint256 amount;
    address to;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
  }

  struct ExecuteSetUserEModeParams {
    uint256 reservesCount;
    address oracle;
    uint8 categoryId;
  }

  struct FinalizeTransferParams {
    address asset;
    address from;
    address to;
    uint256 amount;
    uint256 balanceFromBefore;
    uint256 balanceToBefore;
    uint256 reservesCount;
    address oracle;
    uint8 fromEModeCategory;
  }

  struct FlashloanParams {
    address receiverAddress;
    address[] assets;
    uint256[] amounts;
    uint256[] interestRateModes;
    address onBehalfOf;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
    uint256 reservesCount;
    address addressesProvider;
    address pool;
    uint8 userEModeCategory;
    bool isAuthorizedFlashBorrower;
  }

  struct FlashloanSimpleParams {
    address receiverAddress;
    address asset;
    uint256 amount;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
  }

  struct FlashLoanRepaymentParams {
    uint256 amount;
    uint256 totalPremium;
    uint256 flashLoanPremiumToProtocol;
    address asset;
    address receiverAddress;
    uint16 referralCode;
  }

  struct CalculateUserAccountDataParams {
    UserConfigurationMap userConfig;
    uint256 reservesCount;
    address user;
    address oracle;
    uint8 userEModeCategory;
  }

  struct ValidateBorrowParams {
    ReserveCache reserveCache;
    UserConfigurationMap userConfig;
    address asset;
    address userAddress;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
    bool isolationModeActive;
    address isolationModeCollateralAddress;
    uint256 isolationModeDebtCeiling;
  }

  struct ValidateLiquidationCallParams {
    ReserveCache debtReserveCache;
    uint256 totalDebt;
    uint256 healthFactor;
    address priceOracleSentinel;
  }

  struct CalculateInterestRatesParams {
    uint256 unbacked;
    uint256 liquidityAdded;
    uint256 liquidityTaken;
    uint256 totalDebt;
    uint256 reserveFactor;
    address reserve;
    bool usingVirtualBalance;
    uint256 virtualUnderlyingBalance;
  }

  struct InitReserveParams {
    address asset;
    address aTokenAddress;
    address variableDebtAddress;
    address interestRateStrategyAddress;
    uint16 reservesCount;
    uint16 maxNumberReserves;
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @title Errors library
 * @author Aave
 * @notice Defines the error messages emitted by the different contracts of the Aave protocol
 */
library Errors {
  string public constant CALLER_NOT_POOL_ADMIN = '1'; // 'The caller of the function is not a pool admin'
  string public constant CALLER_NOT_EMERGENCY_ADMIN = '2'; // 'The caller of the function is not an emergency admin'
  string public constant CALLER_NOT_POOL_OR_EMERGENCY_ADMIN = '3'; // 'The caller of the function is not a pool or emergency admin'
  string public constant CALLER_NOT_RISK_OR_POOL_ADMIN = '4'; // 'The caller of the function is not a risk or pool admin'
  string public constant CALLER_NOT_ASSET_LISTING_OR_POOL_ADMIN = '5'; // 'The caller of the function is not an asset listing or pool admin'
  string public constant CALLER_NOT_BRIDGE = '6'; // 'The caller of the function is not a bridge'
  string public constant ADDRESSES_PROVIDER_NOT_REGISTERED = '7'; // 'Pool addresses provider is not registered'
  string public constant INVALID_ADDRESSES_PROVIDER_ID = '8'; // 'Invalid id for the pool addresses provider'
  string public constant NOT_CONTRACT = '9'; // 'Address is not a contract'
  string public constant CALLER_NOT_POOL_CONFIGURATOR = '10'; // 'The caller of the function is not the pool configurator'
  string public constant CALLER_NOT_ATOKEN = '11'; // 'The caller of the function is not an AToken'
  string public constant INVALID_ADDRESSES_PROVIDER = '12'; // 'The address of the pool addresses provider is invalid'
  string public constant INVALID_FLASHLOAN_EXECUTOR_RETURN = '13'; // 'Invalid return value of the flashloan executor function'
  string public constant RESERVE_ALREADY_ADDED = '14'; // 'Reserve has already been added to reserve list'
  string public constant NO_MORE_RESERVES_ALLOWED = '15'; // 'Maximum amount of reserves in the pool reached'
  string public constant EMODE_CATEGORY_RESERVED = '16'; // 'Zero eMode category is reserved for volatile heterogeneous assets'
  string public constant INVALID_EMODE_CATEGORY_ASSIGNMENT = '17'; // 'Invalid eMode category assignment to asset'
  string public constant RESERVE_LIQUIDITY_NOT_ZERO = '18'; // 'The liquidity of the reserve needs to be 0'
  string public constant FLASHLOAN_PREMIUM_INVALID = '19'; // 'Invalid flashloan premium'
  string public constant INVALID_RESERVE_PARAMS = '20'; // 'Invalid risk parameters for the reserve'
  string public constant INVALID_EMODE_CATEGORY_PARAMS = '21'; // 'Invalid risk parameters for the eMode category'
  string public constant BRIDGE_PROTOCOL_FEE_INVALID = '22'; // 'Invalid bridge protocol fee'
  string public constant CALLER_MUST_BE_POOL = '23'; // 'The caller of this function must be a pool'
  string public constant INVALID_MINT_AMOUNT = '24'; // 'Invalid amount to mint'
  string public constant INVALID_BURN_AMOUNT = '25'; // 'Invalid amount to burn'
  string public constant INVALID_AMOUNT = '26'; // 'Amount must be greater than 0'
  string public constant RESERVE_INACTIVE = '27'; // 'Action requires an active reserve'
  string public constant RESERVE_FROZEN = '28'; // 'Action cannot be performed because the reserve is frozen'
  string public constant RESERVE_PAUSED = '29'; // 'Action cannot be performed because the reserve is paused'
  string public constant BORROWING_NOT_ENABLED = '30'; // 'Borrowing is not enabled'
  string public constant NOT_ENOUGH_AVAILABLE_USER_BALANCE = '32'; // 'User cannot withdraw more than the available balance'
  string public constant INVALID_INTEREST_RATE_MODE_SELECTED = '33'; // 'Invalid interest rate mode selected'
  string public constant COLLATERAL_BALANCE_IS_ZERO = '34'; // 'The collateral balance is 0'
  string public constant HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD = '35'; // 'Health factor is lesser than the liquidation threshold'
  string public constant COLLATERAL_CANNOT_COVER_NEW_BORROW = '36'; // 'There is not enough collateral to cover a new borrow'
  string public constant COLLATERAL_SAME_AS_BORROWING_CURRENCY = '37'; // 'Collateral is (mostly) the same currency that is being borrowed'
  string public constant NO_DEBT_OF_SELECTED_TYPE = '39'; // 'For repayment of a specific type of debt, the user needs to have debt that type'
  string public constant NO_EXPLICIT_AMOUNT_TO_REPAY_ON_BEHALF = '40'; // 'To repay on behalf of a user an explicit amount to repay is needed'
  string public constant NO_OUTSTANDING_VARIABLE_DEBT = '42'; // 'User does not have outstanding variable rate debt on this reserve'
  string public constant UNDERLYING_BALANCE_ZERO = '43'; // 'The underlying balance needs to be greater than 0'
  string public constant INTEREST_RATE_REBALANCE_CONDITIONS_NOT_MET = '44'; // 'Interest rate rebalance conditions were not met'
  string public constant HEALTH_FACTOR_NOT_BELOW_THRESHOLD = '45'; // 'Health factor is not below the threshold'
  string public constant COLLATERAL_CANNOT_BE_LIQUIDATED = '46'; // 'The collateral chosen cannot be liquidated'
  string public constant SPECIFIED_CURRENCY_NOT_BORROWED_BY_USER = '47'; // 'User did not borrow the specified currency'
  string public constant INCONSISTENT_FLASHLOAN_PARAMS = '49'; // 'Inconsistent flashloan parameters'
  string public constant BORROW_CAP_EXCEEDED = '50'; // 'Borrow cap is exceeded'
  string public constant SUPPLY_CAP_EXCEEDED = '51'; // 'Supply cap is exceeded'
  string public constant UNBACKED_MINT_CAP_EXCEEDED = '52'; // 'Unbacked mint cap is exceeded'
  string public constant DEBT_CEILING_EXCEEDED = '53'; // 'Debt ceiling is exceeded'
  string public constant UNDERLYING_CLAIMABLE_RIGHTS_NOT_ZERO = '54'; // 'Claimable rights over underlying not zero (aToken supply or accruedToTreasury)'
  string public constant VARIABLE_DEBT_SUPPLY_NOT_ZERO = '56'; // 'Variable debt supply is not zero'
  string public constant LTV_VALIDATION_FAILED = '57'; // 'Ltv validation failed'
  string public constant INCONSISTENT_EMODE_CATEGORY = '58'; // 'Inconsistent eMode category'
  string public constant PRICE_ORACLE_SENTINEL_CHECK_FAILED = '59'; // 'Price oracle sentinel validation failed'
  string public constant ASSET_NOT_BORROWABLE_IN_ISOLATION = '60'; // 'Asset is not borrowable in isolation mode'
  string public constant RESERVE_ALREADY_INITIALIZED = '61'; // 'Reserve has already been initialized'
  string public constant USER_IN_ISOLATION_MODE_OR_LTV_ZERO = '62'; // 'User is in isolation mode or ltv is zero'
  string public constant INVALID_LTV = '63'; // 'Invalid ltv parameter for the reserve'
  string public constant INVALID_LIQ_THRESHOLD = '64'; // 'Invalid liquidity threshold parameter for the reserve'
  string public constant INVALID_LIQ_BONUS = '65'; // 'Invalid liquidity bonus parameter for the reserve'
  string public constant INVALID_DECIMALS = '66'; // 'Invalid decimals parameter of the underlying asset of the reserve'
  string public constant INVALID_RESERVE_FACTOR = '67'; // 'Invalid reserve factor parameter for the reserve'
  string public constant INVALID_BORROW_CAP = '68'; // 'Invalid borrow cap for the reserve'
  string public constant INVALID_SUPPLY_CAP = '69'; // 'Invalid supply cap for the reserve'
  string public constant INVALID_LIQUIDATION_PROTOCOL_FEE = '70'; // 'Invalid liquidation protocol fee for the reserve'
  string public constant INVALID_EMODE_CATEGORY = '71'; // 'Invalid eMode category for the reserve'
  string public constant INVALID_UNBACKED_MINT_CAP = '72'; // 'Invalid unbacked mint cap for the reserve'
  string public constant INVALID_DEBT_CEILING = '73'; // 'Invalid debt ceiling for the reserve
  string public constant INVALID_RESERVE_INDEX = '74'; // 'Invalid reserve index'
  string public constant ACL_ADMIN_CANNOT_BE_ZERO = '75'; // 'ACL admin cannot be set to the zero address'
  string public constant INCONSISTENT_PARAMS_LENGTH = '76'; // 'Array parameters that should be equal length are not'
  string public constant ZERO_ADDRESS_NOT_VALID = '77'; // 'Zero address not valid'
  string public constant INVALID_EXPIRATION = '78'; // 'Invalid expiration'
  string public constant INVALID_SIGNATURE = '79'; // 'Invalid signature'
  string public constant OPERATION_NOT_SUPPORTED = '80'; // 'Operation not supported'
  string public constant DEBT_CEILING_NOT_ZERO = '81'; // 'Debt ceiling is not zero'
  string public constant ASSET_NOT_LISTED = '82'; // 'Asset is not listed'
  string public constant INVALID_OPTIMAL_USAGE_RATIO = '83'; // 'Invalid optimal usage ratio'
  string public constant UNDERLYING_CANNOT_BE_RESCUED = '85'; // 'The underlying asset cannot be rescued'
  string public constant ADDRESSES_PROVIDER_ALREADY_ADDED = '86'; // 'Reserve has already been added to reserve list'
  string public constant POOL_ADDRESSES_DO_NOT_MATCH = '87'; // 'The token implementation pool address and the pool address provided by the initializing pool do not match'
  string public constant SILOED_BORROWING_VIOLATION = '89'; // 'User is trying to borrow multiple assets including a siloed one'
  string public constant RESERVE_DEBT_NOT_ZERO = '90'; // the total debt of the reserve needs to be 0
  string public constant FLASHLOAN_DISABLED = '91'; // FlashLoaning for this asset is disabled
  string public constant INVALID_MAX_RATE = '92'; // The expect maximum borrow rate is invalid
  string public constant WITHDRAW_TO_ATOKEN = '93'; // Withdrawing to the aToken is not allowed
  string public constant SUPPLY_TO_ATOKEN = '94'; // Supplying to the aToken is not allowed
  string public constant SLOPE_2_MUST_BE_GTE_SLOPE_1 = '95'; // Variable interest rate slope 2 can not be lower than slope 1
  string public constant CALLER_NOT_RISK_OR_POOL_OR_EMERGENCY_ADMIN = '96'; // 'The caller of the function is not a risk, pool or emergency admin'
  string public constant LIQUIDATION_GRACE_SENTINEL_CHECK_FAILED = '97'; // 'Liquidation grace sentinel validation failed'
  string public constant INVALID_GRACE_PERIOD = '98'; // Grace period above a valid range
  string public constant INVALID_FREEZE_STATE = '99'; // Reserve is already in the passed freeze state
  string public constant NOT_BORROWABLE_IN_EMODE = '100'; // Asset not borrowable in eMode
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IReserveInterestRateStrategy} from './IReserveInterestRateStrategy.sol';
import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';

/**
 * @title IDefaultInterestRateStrategyV2
 * @author BGD Labs
 * @notice Interface of the default interest rate strategy used by the Aave protocol
 */
interface IDefaultInterestRateStrategyV2 is IReserveInterestRateStrategy {
  /**
   * @notice Holds the interest rate data for a given reserve
   *
   * @dev Since values are in bps, they are multiplied by 1e23 in order to become rays with 27 decimals. This
   * in turn means that the maximum supported interest rate is 4294967295 (2**32-1) bps or 42949672.95%.
   *
   * @param optimalUsageRatio The optimal usage ratio, in bps
   * @param baseVariableBorrowRate The base variable borrow rate, in bps
   * @param variableRateSlope1 The slope of the variable interest curve, before hitting the optimal ratio, in bps
   * @param variableRateSlope2 The slope of the variable interest curve, after hitting the optimal ratio, in bps
   */
  struct InterestRateData {
    uint16 optimalUsageRatio;
    uint32 baseVariableBorrowRate;
    uint32 variableRateSlope1;
    uint32 variableRateSlope2;
  }

  /**
   * @notice The interest rate data, where all values are in ray (fixed-point 27 decimal numbers) for a given reserve,
   * used in in-memory calculations.
   *
   * @param optimalUsageRatio The optimal usage ratio
   * @param baseVariableBorrowRate The base variable borrow rate
   * @param variableRateSlope1 The slope of the variable interest curve, before hitting the optimal ratio
   * @param variableRateSlope2 The slope of the variable interest curve, after hitting the optimal ratio
   */
  struct InterestRateDataRay {
    uint256 optimalUsageRatio;
    uint256 baseVariableBorrowRate;
    uint256 variableRateSlope1;
    uint256 variableRateSlope2;
  }

  /**
   * @notice emitted when new interest rate data is set in a reserve
   *
   * @param reserve address of the reserve that has new interest rate data set
   * @param optimalUsageRatio The optimal usage ratio, in bps
   * @param baseVariableBorrowRate The base variable borrow rate, in bps
   * @param variableRateSlope1 The slope of the variable interest curve, before hitting the optimal ratio, in bps
   * @param variableRateSlope2 The slope of the variable interest curve, after hitting the optimal ratio, in bps
   */
  event RateDataUpdate(
    address indexed reserve,
    uint256 optimalUsageRatio,
    uint256 baseVariableBorrowRate,
    uint256 variableRateSlope1,
    uint256 variableRateSlope2
  );

  /**
   * @notice Returns the address of the PoolAddressesProvider
   * @return The address of the PoolAddressesProvider contract
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);

  /**
   * @notice Returns the maximum value achievable for variable borrow rate, in bps
   * @return The maximum rate
   */
  function MAX_BORROW_RATE() external view returns (uint256);

  /**
   * @notice Returns the minimum optimal point, in bps
   * @return The optimal point
   */
  function MIN_OPTIMAL_POINT() external view returns (uint256);

  /**
   * @notice Returns the maximum optimal point, in bps
   * @return The optimal point
   */
  function MAX_OPTIMAL_POINT() external view returns (uint256);

  /**
   * notice Returns the full InterestRateData object for the given reserve, in ray
   *
   * @param reserve The reserve to get the data of
   *
   * @return The InterestRateDataRay object for the given reserve
   */
  function getInterestRateData(address reserve) external view returns (InterestRateDataRay memory);

  /**
   * notice Returns the full InterestRateDataRay object for the given reserve, in bps
   *
   * @param reserve The reserve to get the data of
   *
   * @return The InterestRateData object for the given reserve
   */
  function getInterestRateDataBps(address reserve) external view returns (InterestRateData memory);

  /**
   * @notice Returns the optimal usage rate for the given reserve in ray
   *
   * @param reserve The reserve to get the optimal usage rate of
   *
   * @return The optimal usage rate is the level of borrow / collateral at which the borrow rate
   */
  function getOptimalUsageRatio(address reserve) external view returns (uint256);

  /**
   * @notice Returns the variable rate slope below optimal usage ratio in ray
   * @dev It's the variable rate when usage ratio > 0 and <= OPTIMAL_USAGE_RATIO
   *
   * @param reserve The reserve to get the variable rate slope 1 of
   *
   * @return The variable rate slope
   */
  function getVariableRateSlope1(address reserve) external view returns (uint256);

  /**
   * @notice Returns the variable rate slope above optimal usage ratio in ray
   * @dev It's the variable rate when usage ratio > OPTIMAL_USAGE_RATIO
   *
   * @param reserve The reserve to get the variable rate slope 2 of
   *
   * @return The variable rate slope
   */
  function getVariableRateSlope2(address reserve) external view returns (uint256);

  /**
   * @notice Returns the base variable borrow rate, in ray
   *
   * @param reserve The reserve to get the base variable borrow rate of
   *
   * @return The base variable borrow rate
   */
  function getBaseVariableBorrowRate(address reserve) external view returns (uint256);

  /**
   * @notice Returns the maximum variable borrow rate, in ray
   *
   * @param reserve The reserve to get the maximum variable borrow rate of
   *
   * @return The maximum variable borrow rate
   */
  function getMaxVariableBorrowRate(address reserve) external view returns (uint256);

  /**
   * @notice Sets interest rate data for an Aave rate strategy
   * @param reserve The reserve to update
   * @param rateData The reserve interest rate data to apply to the given reserve
   *   Being specific to this custom implementation, with custom struct type,
   *   overloading the function on the generic interface
   */
  function setInterestRateParams(address reserve, InterestRateData calldata rateData) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';

/**
 * @title IReserveInterestRateStrategy
 * @author BGD Labs
 * @notice Basic interface for any rate strategy used by the Aave protocol
 */
interface IReserveInterestRateStrategy {
  /**
   * @notice Sets interest rate data for an Aave rate strategy
   * @param reserve The reserve to update
   * @param rateData The abi encoded reserve interest rate data to apply to the given reserve
   *   Abstracted this way as rate strategies can be custom
   */
  function setInterestRateParams(address reserve, bytes calldata rateData) external;

  /**
   * @notice Calculates the interest rates depending on the reserve's state and configurations
   * @param params The parameters needed to calculate interest rates
   * @return liquidityRate The liquidity rate expressed in ray
   * @return variableBorrowRate The variable borrow rate expressed in ray
   */
  function calculateInterestRates(
    DataTypes.CalculateInterestRatesParams memory params
  ) external view returns (uint256, uint256);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @title IPoolAddressesProvider
 * @author Aave
 * @notice Defines the basic interface for a Pool Addresses Provider.
 */
interface IPoolAddressesProvider {
  /**
   * @dev Emitted when the market identifier is updated.
   * @param oldMarketId The old id of the market
   * @param newMarketId The new id of the market
   */
  event MarketIdSet(string indexed oldMarketId, string indexed newMarketId);

  /**
   * @dev Emitted when the pool is updated.
   * @param oldAddress The old address of the Pool
   * @param newAddress The new address of the Pool
   */
  event PoolUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the pool configurator is updated.
   * @param oldAddress The old address of the PoolConfigurator
   * @param newAddress The new address of the PoolConfigurator
   */
  event PoolConfiguratorUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the price oracle is updated.
   * @param oldAddress The old address of the PriceOracle
   * @param newAddress The new address of the PriceOracle
   */
  event PriceOracleUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the ACL manager is updated.
   * @param oldAddress The old address of the ACLManager
   * @param newAddress The new address of the ACLManager
   */
  event ACLManagerUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the ACL admin is updated.
   * @param oldAddress The old address of the ACLAdmin
   * @param newAddress The new address of the ACLAdmin
   */
  event ACLAdminUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the price oracle sentinel is updated.
   * @param oldAddress The old address of the PriceOracleSentinel
   * @param newAddress The new address of the PriceOracleSentinel
   */
  event PriceOracleSentinelUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the pool data provider is updated.
   * @param oldAddress The old address of the PoolDataProvider
   * @param newAddress The new address of the PoolDataProvider
   */
  event PoolDataProviderUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when a new proxy is created.
   * @param id The identifier of the proxy
   * @param proxyAddress The address of the created proxy contract
   * @param implementationAddress The address of the implementation contract
   */
  event ProxyCreated(
    bytes32 indexed id,
    address indexed proxyAddress,
    address indexed implementationAddress
  );

  /**
   * @dev Emitted when a new non-proxied contract address is registered.
   * @param id The identifier of the contract
   * @param oldAddress The address of the old contract
   * @param newAddress The address of the new contract
   */
  event AddressSet(bytes32 indexed id, address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the implementation of the proxy registered with id is updated
   * @param id The identifier of the contract
   * @param proxyAddress The address of the proxy contract
   * @param oldImplementationAddress The address of the old implementation contract
   * @param newImplementationAddress The address of the new implementation contract
   */
  event AddressSetAsProxy(
    bytes32 indexed id,
    address indexed proxyAddress,
    address oldImplementationAddress,
    address indexed newImplementationAddress
  );

  /**
   * @notice Returns the id of the Aave market to which this contract points to.
   * @return The market id
   */
  function getMarketId() external view returns (string memory);

  /**
   * @notice Associates an id with a specific PoolAddressesProvider.
   * @dev This can be used to create an onchain registry of PoolAddressesProviders to
   * identify and validate multiple Aave markets.
   * @param newMarketId The market id
   */
  function setMarketId(string calldata newMarketId) external;

  /**
   * @notice Returns an address by its identifier.
   * @dev The returned address might be an EOA or a contract, potentially proxied
   * @dev It returns ZERO if there is no registered address with the given id
   * @param id The id
   * @return The address of the registered for the specified id
   */
  function getAddress(bytes32 id) external view returns (address);

  /**
   * @notice General function to update the implementation of a proxy registered with
   * certain `id`. If there is no proxy registered, it will instantiate one and
   * set as implementation the `newImplementationAddress`.
   * @dev IMPORTANT Use this function carefully, only for ids that don't have an explicit
   * setter function, in order to avoid unexpected consequences
   * @param id The id
   * @param newImplementationAddress The address of the new implementation
   */
  function setAddressAsProxy(bytes32 id, address newImplementationAddress) external;

  /**
   * @notice Sets an address for an id replacing the address saved in the addresses map.
   * @dev IMPORTANT Use this function carefully, as it will do a hard replacement
   * @param id The id
   * @param newAddress The address to set
   */
  function setAddress(bytes32 id, address newAddress) external;

  /**
   * @notice Returns the address of the Pool proxy.
   * @return The Pool proxy address
   */
  function getPool() external view returns (address);

  /**
   * @notice Updates the implementation of the Pool, or creates a proxy
   * setting the new `pool` implementation when the function is called for the first time.
   * @param newPoolImpl The new Pool implementation
   */
  function setPoolImpl(address newPoolImpl) external;

  /**
   * @notice Returns the address of the PoolConfigurator proxy.
   * @return The PoolConfigurator proxy address
   */
  function getPoolConfigurator() external view returns (address);

  /**
   * @notice Updates the implementation of the PoolConfigurator, or creates a proxy
   * setting the new `PoolConfigurator` implementation when the function is called for the first time.
   * @param newPoolConfiguratorImpl The new PoolConfigurator implementation
   */
  function setPoolConfiguratorImpl(address newPoolConfiguratorImpl) external;

  /**
   * @notice Returns the address of the price oracle.
   * @return The address of the PriceOracle
   */
  function getPriceOracle() external view returns (address);

  /**
   * @notice Updates the address of the price oracle.
   * @param newPriceOracle The address of the new PriceOracle
   */
  function setPriceOracle(address newPriceOracle) external;

  /**
   * @notice Returns the address of the ACL manager.
   * @return The address of the ACLManager
   */
  function getACLManager() external view returns (address);

  /**
   * @notice Updates the address of the ACL manager.
   * @param newAclManager The address of the new ACLManager
   */
  function setACLManager(address newAclManager) external;

  /**
   * @notice Returns the address of the ACL admin.
   * @return The address of the ACL admin
   */
  function getACLAdmin() external view returns (address);

  /**
   * @notice Updates the address of the ACL admin.
   * @param newAclAdmin The address of the new ACL admin
   */
  function setACLAdmin(address newAclAdmin) external;

  /**
   * @notice Returns the address of the price oracle sentinel.
   * @return The address of the PriceOracleSentinel
   */
  function getPriceOracleSentinel() external view returns (address);

  /**
   * @notice Updates the address of the price oracle sentinel.
   * @param newPriceOracleSentinel The address of the new PriceOracleSentinel
   */
  function setPriceOracleSentinel(address newPriceOracleSentinel) external;

  /**
   * @notice Returns the address of the data provider.
   * @return The address of the DataProvider
   */
  function getPoolDataProvider() external view returns (address);

  /**
   * @notice Updates the address of the data provider.
   * @param newDataProvider The address of the new DataProvider
   */
  function setPoolDataProvider(address newDataProvider) external;
}

{
  "remappings": [
    "@openzeppelin/contracts-upgradeable/=lib/aave-v3-origin-private/lib/solidity-utils/lib/openzeppelin-contracts-upgradeable/contracts/",
    "@openzeppelin/contracts/=lib/aave-v3-origin-private/lib/solidity-utils/lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/",
    "aave-v3-origin/=lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/src/",
    "aave-v3-origin-test/=lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/test/",
    "ds-test/=lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/lib/forge-std/lib/ds-test/src/",
    "erc4626-tests/=lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/lib/solidity-utils/lib/openzeppelin-contracts-upgradeable/lib/erc4626-tests/",
    "forge-std/=lib/forge-std/src/",
    "openzeppelin-contracts-upgradeable/=lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/lib/solidity-utils/lib/openzeppelin-contracts-upgradeable/",
    "openzeppelin-contracts/=lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/lib/solidity-utils/lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/",
    "solidity-utils/=lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/lib/solidity-utils/src/",
    "aave-address-book/=lib/aave-helpers/lib/aave-address-book/src/",
    "aave-helpers/=lib/aave-helpers/",
    "aave-v3-core/=lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/src/core/",
    "aave-v3-origin-tests/=lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/tests/",
    "aave-v3-periphery/=lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/src/periphery/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "shanghai",
  "viaIR": false,
  "libraries": {
    "lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/src/contracts/protocol/libraries/logic/BorrowLogic.sol": {
      "BorrowLogic": "0xc3Ba0a556e0813BBf0741CdaD6086ca1023cd6d3"
    },
    "lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/src/contracts/protocol/libraries/logic/BridgeLogic.sol": {
      "BridgeLogic": "0x345a778167524995d6788a9a0e1d0eeb7cbfe496"
    },
    "lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/src/contracts/protocol/libraries/logic/ConfiguratorLogic.sol": {
      "ConfiguratorLogic": "0xeFAC7Bb7f7943Df27EfC108EbAfc450e3812acda"
    },
    "lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/src/contracts/protocol/libraries/logic/EModeLogic.sol": {
      "EModeLogic": "0xA2C266Cd25296A7174134B0a6d894e250c830504"
    },
    "lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/src/contracts/protocol/libraries/logic/FlashLoanLogic.sol": {
      "FlashLoanLogic": "0xcE53459E8734Df93399A425183Ee1860Ca8c2D0b"
    },
    "lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/src/contracts/protocol/libraries/logic/LiquidationLogic.sol": {
      "LiquidationLogic": "0x0c0191dd96ed7ef86d1cc319eb68f127c196a6ee"
    },
    "lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/src/contracts/protocol/libraries/logic/PoolLogic.sol": {
      "PoolLogic": "0xd60e89f5b8bd0e46029fd127741da136b3a574d7"
    },
    "lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/src/contracts/protocol/libraries/logic/SupplyLogic.sol": {
      "SupplyLogic": "0x20ea931ce718b5f3bcdcfc3b7d2685f6a853a55d"
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"provider","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"reserve","type":"address"},{"indexed":false,"internalType":"uint256","name":"optimalUsageRatio","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"baseVariableBorrowRate","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"variableRateSlope1","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"variableRateSlope2","type":"uint256"}],"name":"RateDataUpdate","type":"event"},{"inputs":[],"name":"ADDRESSES_PROVIDER","outputs":[{"internalType":"contract IPoolAddressesProvider","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MAX_BORROW_RATE","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MAX_OPTIMAL_POINT","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MIN_OPTIMAL_POINT","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"uint256","name":"unbacked","type":"uint256"},{"internalType":"uint256","name":"liquidityAdded","type":"uint256"},{"internalType":"uint256","name":"liquidityTaken","type":"uint256"},{"internalType":"uint256","name":"totalDebt","type":"uint256"},{"internalType":"uint256","name":"reserveFactor","type":"uint256"},{"internalType":"address","name":"reserve","type":"address"},{"internalType":"bool","name":"usingVirtualBalance","type":"bool"},{"internalType":"uint256","name":"virtualUnderlyingBalance","type":"uint256"}],"internalType":"struct DataTypes.CalculateInterestRatesParams","name":"params","type":"tuple"}],"name":"calculateInterestRates","outputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"reserve","type":"address"}],"name":"getBaseVariableBorrowRate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"reserve","type":"address"}],"name":"getInterestRateData","outputs":[{"components":[{"internalType":"uint256","name":"optimalUsageRatio","type":"uint256"},{"internalType":"uint256","name":"baseVariableBorrowRate","type":"uint256"},{"internalType":"uint256","name":"variableRateSlope1","type":"uint256"},{"internalType":"uint256","name":"variableRateSlope2","type":"uint256"}],"internalType":"struct IDefaultInterestRateStrategyV2.InterestRateDataRay","name":"","type":"tuple"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"reserve","type":"address"}],"name":"getInterestRateDataBps","outputs":[{"components":[{"internalType":"uint16","name":"optimalUsageRatio","type":"uint16"},{"internalType":"uint32","name":"baseVariableBorrowRate","type":"uint32"},{"internalType":"uint32","name":"variableRateSlope1","type":"uint32"},{"internalType":"uint32","name":"variableRateSlope2","type":"uint32"}],"internalType":"struct IDefaultInterestRateStrategyV2.InterestRateData","name":"","type":"tuple"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"reserve","type":"address"}],"name":"getMaxVariableBorrowRate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"reserve","type":"address"}],"name":"getOptimalUsageRatio","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"reserve","type":"address"}],"name":"getVariableRateSlope1","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"reserve","type":"address"}],"name":"getVariableRateSlope2","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"reserve","type":"address"},{"internalType":"bytes","name":"rateData","type":"bytes"}],"name":"setInterestRateParams","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"reserve","type":"address"},{"components":[{"internalType":"uint16","name":"optimalUsageRatio","type":"uint16"},{"internalType":"uint32","name":"baseVariableBorrowRate","type":"uint32"},{"internalType":"uint32","name":"variableRateSlope1","type":"uint32"},{"internalType":"uint32","name":"variableRateSlope2","type":"uint32"}],"internalType":"struct IDefaultInterestRateStrategyV2.InterestRateData","name":"rateData","type":"tuple"}],"name":"setInterestRateParams","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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