Contract

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.6.12;

import "IERC20.sol";
import "SafeMath.sol";
import "SafeERC20.sol";

import {VaultAPI} from "BaseStrategy.sol";

contract YearnPartnerTracker {
    using SafeERC20 for IERC20;
    using Address for address;
    using SafeMath for uint256;

    /// @notice An event thats emitted when a depositers referred balance increases
    event ReferredBalanceIncreased(address indexed partnerId, address indexed vault, address indexed depositer, uint amountAdded, uint totalDeposited);

    /// @notice Mapping of partner -> depositer -> vault. Each partner can have multiple depositers who deposit to multiple vaults
    mapping (address => mapping (address => mapping(address => uint256))) public referredBalance;


     /**
     * @notice Deposit into a vault the full balance of depositer
     * @param vault The address of the vault
     * @param partnerId The address of the partner who has referred this deposit
     * @return The number of yVault tokens received
     */
    function deposit(address vault, address partnerId) external returns (uint256){
        VaultAPI v = VaultAPI(vault);
        IERC20 want = IERC20(v.token());

        uint256 amount = want.balanceOf(msg.sender);

        return _internalDeposit(v, want, partnerId, amount);

    }

    /**
     * @notice Deposit into a vault the specified amount from depositer
     * @param vault The address of the vault
     * @param partnerId The address of the partner who has referred this deposit
     * @param amount The amount to deposit
     * @return The number of yVault tokens received
     */
    function deposit(address vault, address partnerId, uint256 amount) external returns (uint256){
        VaultAPI v = VaultAPI(vault);
        IERC20 want = IERC20(v.token());

        return _internalDeposit(v, want, partnerId, amount);
    }

    function _internalDeposit(VaultAPI v, IERC20 want, address partnerId, uint256 amount) internal returns (uint256){

        // if there is not enough allowance we set then set them
        if(want.allowance(address(this), address(v)) < amount){
            want.safeApprove(address(v), 0);
            want.safeApprove(address(v), type(uint256).max);
        }

        // pull the required amount from depositer
        want.safeTransferFrom(msg.sender, address(this), amount);
        uint256 receivedShares = v.deposit(amount, msg.sender);

        //we use vault tokens and not deposit amount to track deposits. ie what percent of the tvl is referred
        referredBalance[partnerId][address(v)][msg.sender] = referredBalance[partnerId][address(v)][msg.sender].add(receivedShares);
        emit ReferredBalanceIncreased(partnerId, address(v), msg.sender, receivedShares, referredBalance[partnerId][address(v)][msg.sender]);

        return receivedShares;
    }

}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

import "IERC20.sol";
import "SafeMath.sol";
import "Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity >=0.6.0 <0.7.0;
pragma experimental ABIEncoderV2;

import "IERC20.sol";
import "SafeERC20.sol";
import "SafeMath.sol";

struct StrategyParams {
    uint256 performanceFee;
    uint256 activation;
    uint256 debtRatio;
    uint256 minDebtPerHarvest;
    uint256 maxDebtPerHarvest;
    uint256 lastReport;
    uint256 totalDebt;
    uint256 totalGain;
    uint256 totalLoss;
}

interface VaultAPI is IERC20 {
    function name() external view returns (string calldata);

    function symbol() external view returns (string calldata);

    function decimals() external view returns (uint256);

    function apiVersion() external pure returns (string memory);

    function permit(
        address owner,
        address spender,
        uint256 amount,
        uint256 expiry,
        bytes calldata signature
    ) external returns (bool);

    // NOTE: Vyper produces multiple signatures for a given function with "default" args
    function deposit() external returns (uint256);

    function deposit(uint256 amount) external returns (uint256);

    function deposit(uint256 amount, address recipient) external returns (uint256);

    // NOTE: Vyper produces multiple signatures for a given function with "default" args
    function withdraw() external returns (uint256);

    function withdraw(uint256 maxShares) external returns (uint256);

    function withdraw(uint256 maxShares, address recipient) external returns (uint256);

    function token() external view returns (address);

    function strategies(address _strategy) external view returns (StrategyParams memory);

    function pricePerShare() external view returns (uint256);

    function totalAssets() external view returns (uint256);

    function depositLimit() external view returns (uint256);

    function maxAvailableShares() external view returns (uint256);

    /**
     * View how much the Vault would increase this Strategy's borrow limit,
     * based on its present performance (since its last report). Can be used to
     * determine expectedReturn in your Strategy.
     */
    function creditAvailable() external view returns (uint256);

    /**
     * View how much the Vault would like to pull back from the Strategy,
     * based on its present performance (since its last report). Can be used to
     * determine expectedReturn in your Strategy.
     */
    function debtOutstanding() external view returns (uint256);

    /**
     * View how much the Vault expect this Strategy to return at the current
     * block, based on its present performance (since its last report). Can be
     * used to determine expectedReturn in your Strategy.
     */
    function expectedReturn() external view returns (uint256);

    /**
     * This is the main contact point where the Strategy interacts with the
     * Vault. It is critical that this call is handled as intended by the
     * Strategy. Therefore, this function will be called by BaseStrategy to
     * make sure the integration is correct.
     */
    function report(
        uint256 _gain,
        uint256 _loss,
        uint256 _debtPayment
    ) external returns (uint256);

    /**
     * This function should only be used in the scenario where the Strategy is
     * being retired but no migration of the positions are possible, or in the
     * extreme scenario that the Strategy needs to be put into "Emergency Exit"
     * mode in order for it to exit as quickly as possible. The latter scenario
     * could be for any reason that is considered "critical" that the Strategy
     * exits its position as fast as possible, such as a sudden change in
     * market conditions leading to losses, or an imminent failure in an
     * external dependency.
     */
    function revokeStrategy() external;

    /**
     * View the governance address of the Vault to assert privileged functions
     * can only be called by governance. The Strategy serves the Vault, so it
     * is subject to governance defined by the Vault.
     */
    function governance() external view returns (address);

    /**
     * View the management address of the Vault to assert privileged functions
     * can only be called by management. The Strategy serves the Vault, so it
     * is subject to management defined by the Vault.
     */
    function management() external view returns (address);

    /**
     * View the guardian address of the Vault to assert privileged functions
     * can only be called by guardian. The Strategy serves the Vault, so it
     * is subject to guardian defined by the Vault.
     */
    function guardian() external view returns (address);
}

/**
 * This interface is here for the keeper bot to use.
 */
interface StrategyAPI {
    function name() external view returns (string memory);

    function vault() external view returns (address);

    function want() external view returns (address);

    function apiVersion() external pure returns (string memory);

    function keeper() external view returns (address);

    function isActive() external view returns (bool);

    function delegatedAssets() external view returns (uint256);

    function estimatedTotalAssets() external view returns (uint256);

    function tendTrigger(uint256 callCost) external view returns (bool);

    function tend() external;

    function harvestTrigger(uint256 callCost) external view returns (bool);

    function harvest() external;

    event Harvested(uint256 profit, uint256 loss, uint256 debtPayment, uint256 debtOutstanding);
}

interface HealthCheck {
    function check(
        uint256 profit,
        uint256 loss,
        uint256 debtPayment,
        uint256 debtOutstanding,
        uint256 totalDebt
    ) external view returns (bool);
}

/**
 * @title Yearn Base Strategy
 * @author yearn.finance
 * @notice
 *  BaseStrategy implements all of the required functionality to interoperate
 *  closely with the Vault contract. This contract should be inherited and the
 *  abstract methods implemented to adapt the Strategy to the particular needs
 *  it has to create a return.
 *
 *  Of special interest is the relationship between `harvest()` and
 *  `vault.report()'. `harvest()` may be called simply because enough time has
 *  elapsed since the last report, and not because any funds need to be moved
 *  or positions adjusted. This is critical so that the Vault may maintain an
 *  accurate picture of the Strategy's performance. See  `vault.report()`,
 *  `harvest()`, and `harvestTrigger()` for further details.
 */

abstract contract BaseStrategy {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;
    string public metadataURI;

    // health checks
    bool public doHealthCheck;
    address public healthCheck;

    /**
     * @notice
     *  Used to track which version of `StrategyAPI` this Strategy
     *  implements.
     * @dev The Strategy's version must match the Vault's `API_VERSION`.
     * @return A string which holds the current API version of this contract.
     */
    function apiVersion() public pure returns (string memory) {
        return "0.4.3";
    }

    /**
     * @notice This Strategy's name.
     * @dev
     *  You can use this field to manage the "version" of this Strategy, e.g.
     *  `StrategySomethingOrOtherV1`. However, "API Version" is managed by
     *  `apiVersion()` function above.
     * @return This Strategy's name.
     */
    function name() external view virtual returns (string memory);

    /**
     * @notice
     *  The amount (priced in want) of the total assets managed by this strategy should not count
     *  towards Yearn's TVL calculations.
     * @dev
     *  You can override this field to set it to a non-zero value if some of the assets of this
     *  Strategy is somehow delegated inside another part of of Yearn's ecosystem e.g. another Vault.
     *  Note that this value must be strictly less than or equal to the amount provided by
     *  `estimatedTotalAssets()` below, as the TVL calc will be total assets minus delegated assets.
     *  Also note that this value is used to determine the total assets under management by this
     *  strategy, for the purposes of computing the management fee in `Vault`
     * @return
     *  The amount of assets this strategy manages that should not be included in Yearn's Total Value
     *  Locked (TVL) calculation across it's ecosystem.
     */
    function delegatedAssets() external view virtual returns (uint256) {
        return 0;
    }

    VaultAPI public vault;
    address public strategist;
    address public rewards;
    address public keeper;

    IERC20 public want;

    // So indexers can keep track of this
    event Harvested(uint256 profit, uint256 loss, uint256 debtPayment, uint256 debtOutstanding);

    event UpdatedStrategist(address newStrategist);

    event UpdatedKeeper(address newKeeper);

    event UpdatedRewards(address rewards);

    event UpdatedMinReportDelay(uint256 delay);

    event UpdatedMaxReportDelay(uint256 delay);

    event UpdatedProfitFactor(uint256 profitFactor);

    event UpdatedDebtThreshold(uint256 debtThreshold);

    event EmergencyExitEnabled();

    event UpdatedMetadataURI(string metadataURI);

    // The minimum number of seconds between harvest calls. See
    // `setMinReportDelay()` for more details.
    uint256 public minReportDelay;

    // The maximum number of seconds between harvest calls. See
    // `setMaxReportDelay()` for more details.
    uint256 public maxReportDelay;

    // The minimum multiple that `callCost` must be above the credit/profit to
    // be "justifiable". See `setProfitFactor()` for more details.
    uint256 public profitFactor;

    // Use this to adjust the threshold at which running a debt causes a
    // harvest trigger. See `setDebtThreshold()` for more details.
    uint256 public debtThreshold;

    // See note on `setEmergencyExit()`.
    bool public emergencyExit;

    // modifiers
    modifier onlyAuthorized() {
        require(msg.sender == strategist || msg.sender == governance(), "!authorized");
        _;
    }

    modifier onlyEmergencyAuthorized() {
        require(
            msg.sender == strategist || msg.sender == governance() || msg.sender == vault.guardian() || msg.sender == vault.management(),
            "!authorized"
        );
        _;
    }

    modifier onlyStrategist() {
        require(msg.sender == strategist, "!strategist");
        _;
    }

    modifier onlyGovernance() {
        require(msg.sender == governance(), "!authorized");
        _;
    }

    modifier onlyKeepers() {
        require(
            msg.sender == keeper ||
                msg.sender == strategist ||
                msg.sender == governance() ||
                msg.sender == vault.guardian() ||
                msg.sender == vault.management(),
            "!authorized"
        );
        _;
    }

    modifier onlyVaultManagers() {
        require(msg.sender == vault.management() || msg.sender == governance(), "!authorized");
        _;
    }

    constructor(address _vault) public {
        _initialize(_vault, msg.sender, msg.sender, msg.sender);
    }

    /**
     * @notice
     *  Initializes the Strategy, this is called only once, when the
     *  contract is deployed.
     * @dev `_vault` should implement `VaultAPI`.
     * @param _vault The address of the Vault responsible for this Strategy.
     * @param _strategist The address to assign as `strategist`.
     * The strategist is able to change the reward address
     * @param _rewards  The address to use for pulling rewards.
     * @param _keeper The adddress of the _keeper. _keeper
     * can harvest and tend a strategy.
     */
    function _initialize(
        address _vault,
        address _strategist,
        address _rewards,
        address _keeper
    ) internal {
        require(address(want) == address(0), "Strategy already initialized");

        vault = VaultAPI(_vault);
        want = IERC20(vault.token());
        want.safeApprove(_vault, uint256(-1)); // Give Vault unlimited access (might save gas)
        strategist = _strategist;
        rewards = _rewards;
        keeper = _keeper;

        // initialize variables
        minReportDelay = 0;
        maxReportDelay = 86400;
        profitFactor = 100;
        debtThreshold = 0;

        vault.approve(rewards, uint256(-1)); // Allow rewards to be pulled
    }

    function setHealthCheck(address _healthCheck) external onlyVaultManagers {
        healthCheck = _healthCheck;
    }

    function setDoHealthCheck(bool _doHealthCheck) external onlyVaultManagers {
        doHealthCheck = _doHealthCheck;
    }

    /**
     * @notice
     *  Used to change `strategist`.
     *
     *  This may only be called by governance or the existing strategist.
     * @param _strategist The new address to assign as `strategist`.
     */
    function setStrategist(address _strategist) external onlyAuthorized {
        require(_strategist != address(0));
        strategist = _strategist;
        emit UpdatedStrategist(_strategist);
    }

    /**
     * @notice
     *  Used to change `keeper`.
     *
     *  `keeper` is the only address that may call `tend()` or `harvest()`,
     *  other than `governance()` or `strategist`. However, unlike
     *  `governance()` or `strategist`, `keeper` may *only* call `tend()`
     *  and `harvest()`, and no other authorized functions, following the
     *  principle of least privilege.
     *
     *  This may only be called by governance or the strategist.
     * @param _keeper The new address to assign as `keeper`.
     */
    function setKeeper(address _keeper) external onlyAuthorized {
        require(_keeper != address(0));
        keeper = _keeper;
        emit UpdatedKeeper(_keeper);
    }

    /**
     * @notice
     *  Used to change `rewards`. EOA or smart contract which has the permission
     *  to pull rewards from the vault.
     *
     *  This may only be called by the strategist.
     * @param _rewards The address to use for pulling rewards.
     */
    function setRewards(address _rewards) external onlyStrategist {
        require(_rewards != address(0));
        vault.approve(rewards, 0);
        rewards = _rewards;
        vault.approve(rewards, uint256(-1));
        emit UpdatedRewards(_rewards);
    }

    /**
     * @notice
     *  Used to change `minReportDelay`. `minReportDelay` is the minimum number
     *  of blocks that should pass for `harvest()` to be called.
     *
     *  For external keepers (such as the Keep3r network), this is the minimum
     *  time between jobs to wait. (see `harvestTrigger()`
     *  for more details.)
     *
     *  This may only be called by governance or the strategist.
     * @param _delay The minimum number of seconds to wait between harvests.
     */
    function setMinReportDelay(uint256 _delay) external onlyAuthorized {
        minReportDelay = _delay;
        emit UpdatedMinReportDelay(_delay);
    }

    /**
     * @notice
     *  Used to change `maxReportDelay`. `maxReportDelay` is the maximum number
     *  of blocks that should pass for `harvest()` to be called.
     *
     *  For external keepers (such as the Keep3r network), this is the maximum
     *  time between jobs to wait. (see `harvestTrigger()`
     *  for more details.)
     *
     *  This may only be called by governance or the strategist.
     * @param _delay The maximum number of seconds to wait between harvests.
     */
    function setMaxReportDelay(uint256 _delay) external onlyAuthorized {
        maxReportDelay = _delay;
        emit UpdatedMaxReportDelay(_delay);
    }

    /**
     * @notice
     *  Used to change `profitFactor`. `profitFactor` is used to determine
     *  if it's worthwhile to harvest, given gas costs. (See `harvestTrigger()`
     *  for more details.)
     *
     *  This may only be called by governance or the strategist.
     * @param _profitFactor A ratio to multiply anticipated
     * `harvest()` gas cost against.
     */
    function setProfitFactor(uint256 _profitFactor) external onlyAuthorized {
        profitFactor = _profitFactor;
        emit UpdatedProfitFactor(_profitFactor);
    }

    /**
     * @notice
     *  Sets how far the Strategy can go into loss without a harvest and report
     *  being required.
     *
     *  By default this is 0, meaning any losses would cause a harvest which
     *  will subsequently report the loss to the Vault for tracking. (See
     *  `harvestTrigger()` for more details.)
     *
     *  This may only be called by governance or the strategist.
     * @param _debtThreshold How big of a loss this Strategy may carry without
     * being required to report to the Vault.
     */
    function setDebtThreshold(uint256 _debtThreshold) external onlyAuthorized {
        debtThreshold = _debtThreshold;
        emit UpdatedDebtThreshold(_debtThreshold);
    }

    /**
     * @notice
     *  Used to change `metadataURI`. `metadataURI` is used to store the URI
     * of the file describing the strategy.
     *
     *  This may only be called by governance or the strategist.
     * @param _metadataURI The URI that describe the strategy.
     */
    function setMetadataURI(string calldata _metadataURI) external onlyAuthorized {
        metadataURI = _metadataURI;
        emit UpdatedMetadataURI(_metadataURI);
    }

    /**
     * Resolve governance address from Vault contract, used to make assertions
     * on protected functions in the Strategy.
     */
    function governance() internal view returns (address) {
        return vault.governance();
    }

    /**
     * @notice
     *  Provide an accurate conversion from `_amtInWei` (denominated in wei)
     *  to `want` (using the native decimal characteristics of `want`).
     * @dev
     *  Care must be taken when working with decimals to assure that the conversion
     *  is compatible. As an example:
     *
     *      given 1e17 wei (0.1 ETH) as input, and want is USDC (6 decimals),
     *      with USDC/ETH = 1800, this should give back 1800000000 (180 USDC)
     *
     * @param _amtInWei The amount (in wei/1e-18 ETH) to convert to `want`
     * @return The amount in `want` of `_amtInEth` converted to `want`
     **/
    function ethToWant(uint256 _amtInWei) public view virtual returns (uint256);

    /**
     * @notice
     *  Provide an accurate estimate for the total amount of assets
     *  (principle + return) that this Strategy is currently managing,
     *  denominated in terms of `want` tokens.
     *
     *  This total should be "realizable" e.g. the total value that could
     *  *actually* be obtained from this Strategy if it were to divest its
     *  entire position based on current on-chain conditions.
     * @dev
     *  Care must be taken in using this function, since it relies on external
     *  systems, which could be manipulated by the attacker to give an inflated
     *  (or reduced) value produced by this function, based on current on-chain
     *  conditions (e.g. this function is possible to influence through
     *  flashloan attacks, oracle manipulations, or other DeFi attack
     *  mechanisms).
     *
     *  It is up to governance to use this function to correctly order this
     *  Strategy relative to its peers in the withdrawal queue to minimize
     *  losses for the Vault based on sudden withdrawals. This value should be
     *  higher than the total debt of the Strategy and higher than its expected
     *  value to be "safe".
     * @return The estimated total assets in this Strategy.
     */
    function estimatedTotalAssets() public view virtual returns (uint256);

    /*
     * @notice
     *  Provide an indication of whether this strategy is currently "active"
     *  in that it is managing an active position, or will manage a position in
     *  the future. This should correlate to `harvest()` activity, so that Harvest
     *  events can be tracked externally by indexing agents.
     * @return True if the strategy is actively managing a position.
     */
    function isActive() public view returns (bool) {
        return vault.strategies(address(this)).debtRatio > 0 || estimatedTotalAssets() > 0;
    }

    /**
     * Perform any Strategy unwinding or other calls necessary to capture the
     * "free return" this Strategy has generated since the last time its core
     * position(s) were adjusted. Examples include unwrapping extra rewards.
     * This call is only used during "normal operation" of a Strategy, and
     * should be optimized to minimize losses as much as possible.
     *
     * This method returns any realized profits and/or realized losses
     * incurred, and should return the total amounts of profits/losses/debt
     * payments (in `want` tokens) for the Vault's accounting (e.g.
     * `want.balanceOf(this) >= _debtPayment + _profit`).
     *
     * `_debtOutstanding` will be 0 if the Strategy is not past the configured
     * debt limit, otherwise its value will be how far past the debt limit
     * the Strategy is. The Strategy's debt limit is configured in the Vault.
     *
     * NOTE: `_debtPayment` should be less than or equal to `_debtOutstanding`.
     *       It is okay for it to be less than `_debtOutstanding`, as that
     *       should only used as a guide for how much is left to pay back.
     *       Payments should be made to minimize loss from slippage, debt,
     *       withdrawal fees, etc.
     *
     * See `vault.debtOutstanding()`.
     */
    function prepareReturn(uint256 _debtOutstanding)
        internal
        virtual
        returns (
            uint256 _profit,
            uint256 _loss,
            uint256 _debtPayment
        );

    /**
     * Perform any adjustments to the core position(s) of this Strategy given
     * what change the Vault made in the "investable capital" available to the
     * Strategy. Note that all "free capital" in the Strategy after the report
     * was made is available for reinvestment. Also note that this number
     * could be 0, and you should handle that scenario accordingly.
     *
     * See comments regarding `_debtOutstanding` on `prepareReturn()`.
     */
    function adjustPosition(uint256 _debtOutstanding) internal virtual;

    /**
     * Liquidate up to `_amountNeeded` of `want` of this strategy's positions,
     * irregardless of slippage. Any excess will be re-invested with `adjustPosition()`.
     * This function should return the amount of `want` tokens made available by the
     * liquidation. If there is a difference between them, `_loss` indicates whether the
     * difference is due to a realized loss, or if there is some other sitution at play
     * (e.g. locked funds) where the amount made available is less than what is needed.
     *
     * NOTE: The invariant `_liquidatedAmount + _loss <= _amountNeeded` should always be maintained
     */
    function liquidatePosition(uint256 _amountNeeded) internal virtual returns (uint256 _liquidatedAmount, uint256 _loss);

    /**
     * Liquidate everything and returns the amount that got freed.
     * This function is used during emergency exit instead of `prepareReturn()` to
     * liquidate all of the Strategy's positions back to the Vault.
     */

    function liquidateAllPositions() internal virtual returns (uint256 _amountFreed);

    /**
     * @notice
     *  Provide a signal to the keeper that `tend()` should be called. The
     *  keeper will provide the estimated gas cost that they would pay to call
     *  `tend()`, and this function should use that estimate to make a
     *  determination if calling it is "worth it" for the keeper. This is not
     *  the only consideration into issuing this trigger, for example if the
     *  position would be negatively affected if `tend()` is not called
     *  shortly, then this can return `true` even if the keeper might be
     *  "at a loss" (keepers are always reimbursed by Yearn).
     * @dev
     *  `callCostInWei` must be priced in terms of `wei` (1e-18 ETH).
     *
     *  This call and `harvestTrigger()` should never return `true` at the same
     *  time.
     * @param callCostInWei The keeper's estimated gas cost to call `tend()` (in wei).
     * @return `true` if `tend()` should be called, `false` otherwise.
     */
    function tendTrigger(uint256 callCostInWei) public view virtual returns (bool) {
        // We usually don't need tend, but if there are positions that need
        // active maintainence, overriding this function is how you would
        // signal for that.
        // If your implementation uses the cost of the call in want, you can
        // use uint256 callCost = ethToWant(callCostInWei);

        return false;
    }

    /**
     * @notice
     *  Adjust the Strategy's position. The purpose of tending isn't to
     *  realize gains, but to maximize yield by reinvesting any returns.
     *
     *  See comments on `adjustPosition()`.
     *
     *  This may only be called by governance, the strategist, or the keeper.
     */
    function tend() external onlyKeepers {
        // Don't take profits with this call, but adjust for better gains
        adjustPosition(vault.debtOutstanding());
    }

    /**
     * @notice
     *  Provide a signal to the keeper that `harvest()` should be called. The
     *  keeper will provide the estimated gas cost that they would pay to call
     *  `harvest()`, and this function should use that estimate to make a
     *  determination if calling it is "worth it" for the keeper. This is not
     *  the only consideration into issuing this trigger, for example if the
     *  position would be negatively affected if `harvest()` is not called
     *  shortly, then this can return `true` even if the keeper might be "at a
     *  loss" (keepers are always reimbursed by Yearn).
     * @dev
     *  `callCostInWei` must be priced in terms of `wei` (1e-18 ETH).
     *
     *  This call and `tendTrigger` should never return `true` at the
     *  same time.
     *
     *  See `min/maxReportDelay`, `profitFactor`, `debtThreshold` to adjust the
     *  strategist-controlled parameters that will influence whether this call
     *  returns `true` or not. These parameters will be used in conjunction
     *  with the parameters reported to the Vault (see `params`) to determine
     *  if calling `harvest()` is merited.
     *
     *  It is expected that an external system will check `harvestTrigger()`.
     *  This could be a script run off a desktop or cloud bot (e.g.
     *  https://github.com/iearn-finance/yearn-vaults/blob/main/scripts/keep.py),
     *  or via an integration with the Keep3r network (e.g.
     *  https://github.com/Macarse/GenericKeep3rV2/blob/master/contracts/keep3r/GenericKeep3rV2.sol).
     * @param callCostInWei The keeper's estimated gas cost to call `harvest()` (in wei).
     * @return `true` if `harvest()` should be called, `false` otherwise.
     */
    function harvestTrigger(uint256 callCostInWei) public view virtual returns (bool) {
        uint256 callCost = ethToWant(callCostInWei);
        StrategyParams memory params = vault.strategies(address(this));

        // Should not trigger if Strategy is not activated
        if (params.activation == 0) return false;

        // Should not trigger if we haven't waited long enough since previous harvest
        if (block.timestamp.sub(params.lastReport) < minReportDelay) return false;

        // Should trigger if hasn't been called in a while
        if (block.timestamp.sub(params.lastReport) >= maxReportDelay) return true;

        // If some amount is owed, pay it back
        // NOTE: Since debt is based on deposits, it makes sense to guard against large
        //       changes to the value from triggering a harvest directly through user
        //       behavior. This should ensure reasonable resistance to manipulation
        //       from user-initiated withdrawals as the outstanding debt fluctuates.
        uint256 outstanding = vault.debtOutstanding();
        if (outstanding > debtThreshold) return true;

        // Check for profits and losses
        uint256 total = estimatedTotalAssets();
        // Trigger if we have a loss to report
        if (total.add(debtThreshold) < params.totalDebt) return true;

        uint256 profit = 0;
        if (total > params.totalDebt) profit = total.sub(params.totalDebt); // We've earned a profit!

        // Otherwise, only trigger if it "makes sense" economically (gas cost
        // is <N% of value moved)
        uint256 credit = vault.creditAvailable();
        return (profitFactor.mul(callCost) < credit.add(profit));
    }

    /**
     * @notice
     *  Harvests the Strategy, recognizing any profits or losses and adjusting
     *  the Strategy's position.
     *
     *  In the rare case the Strategy is in emergency shutdown, this will exit
     *  the Strategy's position.
     *
     *  This may only be called by governance, the strategist, or the keeper.
     * @dev
     *  When `harvest()` is called, the Strategy reports to the Vault (via
     *  `vault.report()`), so in some cases `harvest()` must be called in order
     *  to take in profits, to borrow newly available funds from the Vault, or
     *  otherwise adjust its position. In other cases `harvest()` must be
     *  called to report to the Vault on the Strategy's position, especially if
     *  any losses have occurred.
     */
    function harvest() external onlyKeepers {
        uint256 profit = 0;
        uint256 loss = 0;
        uint256 debtOutstanding = vault.debtOutstanding();
        uint256 debtPayment = 0;
        if (emergencyExit) {
            // Free up as much capital as possible
            uint256 amountFreed = liquidateAllPositions();
            if (amountFreed < debtOutstanding) {
                loss = debtOutstanding.sub(amountFreed);
            } else if (amountFreed > debtOutstanding) {
                profit = amountFreed.sub(debtOutstanding);
            }
            debtPayment = debtOutstanding.sub(loss);
        } else {
            // Free up returns for Vault to pull
            (profit, loss, debtPayment) = prepareReturn(debtOutstanding);
        }

        // Allow Vault to take up to the "harvested" balance of this contract,
        // which is the amount it has earned since the last time it reported to
        // the Vault.
        uint256 totalDebt = vault.strategies(address(this)).totalDebt;
        debtOutstanding = vault.report(profit, loss, debtPayment);

        // Check if free returns are left, and re-invest them
        adjustPosition(debtOutstanding);

        // call healthCheck contract
        if (doHealthCheck && healthCheck != address(0)) {
            require(HealthCheck(healthCheck).check(profit, loss, debtPayment, debtOutstanding, totalDebt), "!healthcheck");
        } else {
            doHealthCheck = true;
        }

        emit Harvested(profit, loss, debtPayment, debtOutstanding);
    }

    /**
     * @notice
     *  Withdraws `_amountNeeded` to `vault`.
     *
     *  This may only be called by the Vault.
     * @param _amountNeeded How much `want` to withdraw.
     * @return _loss Any realized losses
     */
    function withdraw(uint256 _amountNeeded) external returns (uint256 _loss) {
        require(msg.sender == address(vault), "!vault");
        // Liquidate as much as possible to `want`, up to `_amountNeeded`
        uint256 amountFreed;
        (amountFreed, _loss) = liquidatePosition(_amountNeeded);
        // Send it directly back (NOTE: Using `msg.sender` saves some gas here)
        want.safeTransfer(msg.sender, amountFreed);
        // NOTE: Reinvest anything leftover on next `tend`/`harvest`
    }

    /**
     * Do anything necessary to prepare this Strategy for migration, such as
     * transferring any reserve or LP tokens, CDPs, or other tokens or stores of
     * value.
     */
    function prepareMigration(address _newStrategy) internal virtual;

    /**
     * @notice
     *  Transfers all `want` from this Strategy to `_newStrategy`.
     *
     *  This may only be called by the Vault.
     * @dev
     * The new Strategy's Vault must be the same as this Strategy's Vault.
     *  The migration process should be carefully performed to make sure all
     * the assets are migrated to the new address, which should have never
     * interacted with the vault before.
     * @param _newStrategy The Strategy to migrate to.
     */
    function migrate(address _newStrategy) external {
        require(msg.sender == address(vault));
        require(BaseStrategy(_newStrategy).vault() == vault);
        prepareMigration(_newStrategy);
        want.safeTransfer(_newStrategy, want.balanceOf(address(this)));
    }

    /**
     * @notice
     *  Activates emergency exit. Once activated, the Strategy will exit its
     *  position upon the next harvest, depositing all funds into the Vault as
     *  quickly as is reasonable given on-chain conditions.
     *
     *  This may only be called by governance or the strategist.
     * @dev
     *  See `vault.setEmergencyShutdown()` and `harvest()` for further details.
     */
    function setEmergencyExit() external onlyEmergencyAuthorized {
        emergencyExit = true;
        vault.revokeStrategy();

        emit EmergencyExitEnabled();
    }

    /**
     * Override this to add all tokens/tokenized positions this contract
     * manages on a *persistent* basis (e.g. not just for swapping back to
     * want ephemerally).
     *
     * NOTE: Do *not* include `want`, already included in `sweep` below.
     *
     * Example:
     * ```
     *    function protectedTokens() internal override view returns (address[] memory) {
     *      address[] memory protected = new address[](3);
     *      protected[0] = tokenA;
     *      protected[1] = tokenB;
     *      protected[2] = tokenC;
     *      return protected;
     *    }
     * ```
     */
    function protectedTokens() internal view virtual returns (address[] memory);

    /**
     * @notice
     *  Removes tokens from this Strategy that are not the type of tokens
     *  managed by this Strategy. This may be used in case of accidentally
     *  sending the wrong kind of token to this Strategy.
     *
     *  Tokens will be sent to `governance()`.
     *
     *  This will fail if an attempt is made to sweep `want`, or any tokens
     *  that are protected by this Strategy.
     *
     *  This may only be called by governance.
     * @dev
     *  Implement `protectedTokens()` to specify any additional tokens that
     *  should be protected from sweeping in addition to `want`.
     * @param _token The token to transfer out of this vault.
     */
    function sweep(address _token) external onlyGovernance {
        require(_token != address(want), "!want");
        require(_token != address(vault), "!shares");

        address[] memory _protectedTokens = protectedTokens();
        for (uint256 i; i < _protectedTokens.length; i++) require(_token != _protectedTokens[i], "!protected");

        IERC20(_token).safeTransfer(governance(), IERC20(_token).balanceOf(address(this)));
    }
}

abstract contract BaseStrategyInitializable is BaseStrategy {
    bool public isOriginal = true;
    event Cloned(address indexed clone);

    constructor(address _vault) public BaseStrategy(_vault) {}

    function initialize(
        address _vault,
        address _strategist,
        address _rewards,
        address _keeper
    ) external virtual {
        _initialize(_vault, _strategist, _rewards, _keeper);
    }

    function clone(address _vault) external returns (address) {
        require(isOriginal, "!clone");
        return this.clone(_vault, msg.sender, msg.sender, msg.sender);
    }

    function clone(
        address _vault,
        address _strategist,
        address _rewards,
        address _keeper
    ) external returns (address newStrategy) {
        // Copied from https://github.com/optionality/clone-factory/blob/master/contracts/CloneFactory.sol
        bytes20 addressBytes = bytes20(address(this));

        assembly {
            // EIP-1167 bytecode
            let clone_code := mload(0x40)
            mstore(clone_code, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)
            mstore(add(clone_code, 0x14), addressBytes)
            mstore(add(clone_code, 0x28), 0x5af43d82803e903d91602b57fd5bf30000000000000000000000000000000000)
            newStrategy := create(0, clone_code, 0x37)
        }

        BaseStrategyInitializable(newStrategy).initialize(_vault, _strategist, _rewards, _keeper);

        emit Cloned(newStrategy);
    }
}

{
  "evmVersion": "istanbul",
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"partnerId","type":"address"},{"indexed":true,"internalType":"address","name":"vault","type":"address"},{"indexed":true,"internalType":"address","name":"depositer","type":"address"},{"indexed":false,"internalType":"uint256","name":"amountAdded","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"totalDeposited","type":"uint256"}],"name":"ReferredBalanceIncreased","type":"event"},{"inputs":[{"internalType":"address","name":"vault","type":"address"},{"internalType":"address","name":"partnerId","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"deposit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"vault","type":"address"},{"internalType":"address","name":"partnerId","type":"address"}],"name":"deposit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"","type":"address"}],"name":"referredBalance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"}]

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