Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

/**
    Minesweeper PvP - Dive deep into strategic battles against your friends, and up the stakes with $MSPVP wagers!

    Website: https://minesweeperpvp.com/
    Telegram: https://t.me/MinesweeperPvP
    Twitter: https://twitter.com/minesweeperpvp

**/

// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

////// lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol
// OpenZeppelin Contracts v4.4.0 (token/ERC20/IERC20.sol)

/* pragma solidity ^0.8.0; */

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

interface IUniswapV2Factory {
    event PairCreated(address indexed token0, address indexed token1, address pair, uint);

    function createPair(address tokenA, address tokenB) external returns (address pair);
}

interface IUniswapV2Router02 {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);

    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);

    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;

    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    )
    external payable;
}

interface IUniswapV2Pair {
    function sync() external;
}

contract MinesweeperPvP is Context, IERC20, Ownable {
    using SafeMath for uint256;

    IUniswapV2Router02 public uniRouterV02;

    address public uniswap02Pair;
    bool public isTradingEnabled = false;

    mapping(address => uint256) private balances;
    mapping(address => mapping(address => uint256)) private _allowances;
    mapping(address => bool) private _isExcludedFromFee;

    uint256 private feeForLiquidityPercentage;
    uint256 private feeForRevenuePercentage;
    address public liquidityFeeAddress;
    address public revenueFeeAddress;

    string private constant _name = "Minesweeper PvP";
    string private constant _symbol = "MSPVP";

    uint8 private constant _decimals = 9;

    uint256 private _tTotal = 10000000 * 10 ** _decimals;
    uint256 public _maxAmountPerWallet = 350000 * 10 ** _decimals;
    uint256 public _maxAmountPerTx = 350000 * 10 ** _decimals;
    uint256 public swapTokenThreshold = 100000 * 10 ** _decimals;
    uint256 public forceSwapCounter;

    struct BuyFeeStruct {
        uint256 liquidity;
        uint256 revenue;
    }

    struct SellFeeStruct {
        uint256 liquidity;
        uint256 revenue;
    }

    BuyFeeStruct public buyFeeSettings;
    SellFeeStruct public sellFeeSettings;

    bool private isInSwapMode;

    event SwapAndLiquify(uint256 tokensSwapped, uint256 ethReceived, uint256 tokensIntoLiquidity);

    constructor (address marketingAddress, address liquidityAddress) {
        revenueFeeAddress = marketingAddress;
        liquidityFeeAddress = liquidityAddress;
        balances[_msgSender()] = _tTotal;

        sellFeeSettings.liquidity = 1;
        sellFeeSettings.revenue = 1;
        buyFeeSettings.liquidity = 1;
        buyFeeSettings.revenue = 1;


        IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
        address _uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());

        uniRouterV02 = _uniswapV2Router;
        uniswap02Pair = _uniswapV2Pair;

        _isExcludedFromFee[msg.sender] = true;
        _isExcludedFromFee[address(this)] = true;
        _isExcludedFromFee[address(0x00)] = true;
        _isExcludedFromFee[address(0xdead)] = true;


        emit Transfer(address(0), _msgSender(), _tTotal);
    }

    function name() public pure returns (string memory) {return _name;}

    function symbol() public pure returns (string memory) {return _symbol;}

    function decimals() public pure returns (uint8) {return _decimals;}

    function totalSupply() public view override returns (uint256) {return _tTotal;}

    function balanceOf(address account) public view override returns (uint256) {return balances[account];}

    function transfer(address recipient, uint256 amount) public override returns (bool) {_transfer(_msgSender(), recipient, amount);
        return true;}

    function allowance(address owner, address spender) public view override returns (uint256) {return _allowances[owner][spender];}

    function approve(address spender, uint256 amount) public override returns (bool) {_approve(_msgSender(), spender, amount);
        return true;}

    function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()] - amount);
        return true;}

    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
        return true;}

    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender] - subtractedValue);
        return true;}

    function excludeFromFees(address account, bool excluded) public onlyOwner {
        _isExcludedFromFee[address(account)] = excluded;}

    function enableTrading() external onlyOwner {
        isTradingEnabled = true;
    }

    receive() external payable {}

    function takeFeesFromBuy(uint256 amount, address from) private returns (uint256) {
        uint256 liquidityFeeToken = amount * buyFeeSettings.liquidity / 100;
        uint256 marketingFeeTokens = amount * buyFeeSettings.revenue / 100;

        balances[address(this)] += liquidityFeeToken + marketingFeeTokens;
        emit Transfer(from, address(this), marketingFeeTokens + liquidityFeeToken);
        return (amount - liquidityFeeToken - marketingFeeTokens);
    }

    function takeFeesFromSell(uint256 amount, address from) private returns (uint256) {
        uint256 liquidityFeeToken = amount * sellFeeSettings.liquidity / 100;
        uint256 marketingFeeTokens = amount * sellFeeSettings.revenue / 100;

        balances[address(this)] += liquidityFeeToken + marketingFeeTokens;
        emit Transfer(from, address(this), marketingFeeTokens + liquidityFeeToken);
        return (amount - liquidityFeeToken - marketingFeeTokens);
    }

    function setMaxTxSetting(uint256 _maxTx, uint256 _maxWallet) public onlyOwner {
        require(_maxTx + _maxWallet > _tTotal / 1000, "Should be bigger than 0,1%");
        _maxAmountPerTx = _maxTx;
        _maxAmountPerWallet = _maxWallet;
    }

    function setMaxFeeSetting(uint256 _buyMarketingFee, uint256 _buyLiquidityFee, uint256 _sellMarketingFee, uint256 _sellLiquidityFee) public onlyOwner {
        require(_buyMarketingFee + _buyLiquidityFee < 500 || _sellLiquidityFee + _sellMarketingFee < 500, "Can't change fee higher than 49%");

        buyFeeSettings.liquidity = _buyLiquidityFee;
        buyFeeSettings.revenue = _buyMarketingFee;

        sellFeeSettings.liquidity = _sellLiquidityFee;
        sellFeeSettings.revenue = _sellMarketingFee;
    }


    function isExcludedFromFee(address account) public view returns (bool) {
        return _isExcludedFromFee[account];
    }

    function _approve(address owner, address spender, uint256 amount) private {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    function _transfer(
        address from,
        address to,
        uint256 amount
    ) private {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");
        require(amount > 0, "Transfer amount must be greater than zero");

        balances[from] -= amount;
        uint256 transferAmount = amount;

        bool takeFee;

        if (!isTradingEnabled) {
            require(_isExcludedFromFee[from] || _isExcludedFromFee[to], "Trading is not active.");
        }
        if (!_isExcludedFromFee[from] && !_isExcludedFromFee[to]) {
            takeFee = true;
        }

        if (takeFee) {
            if (to != uniswap02Pair) {
                require(amount <= _maxAmountPerTx, "Transfer Amount exceeds the maxTxnsAmount");
                require(balanceOf(to) + amount <= _maxAmountPerWallet, "Transfer amount exceeds the maxWalletAmount.");
                transferAmount = takeFeesFromBuy(amount, to);
            }

            if (from != uniswap02Pair) {
                require(amount <= _maxAmountPerTx, "Transfer Amount exceeds the maxTxnsAmount");
                transferAmount = takeFeesFromSell(amount, from);
                forceSwapCounter += 1;

                if (balanceOf(address(this)) >= swapTokenThreshold && !isInSwapMode) {
                    isInSwapMode = true;
                    swapFees(swapTokenThreshold);
                    isInSwapMode = false;
                    forceSwapCounter = 0;
                }

                if (forceSwapCounter > 5 && !isInSwapMode) {
                    isInSwapMode = true;
                    swapFees(balanceOf(address(this)));
                    isInSwapMode = false;
                    forceSwapCounter = 0;
                }
            }

            if (to != uniswap02Pair && from != uniswap02Pair) {
                require(amount <= _maxAmountPerTx, "Transfer Amount exceeds the maxTxnsAmount");
                require(balanceOf(to) + amount <= _maxAmountPerWallet, "Transfer amount exceeds the maxWalletAmount.");
            }
        }

        balances[to] += transferAmount;
        emit Transfer(from, to, transferAmount);
    }

    function swapFees(uint256 amount) private {
        uint256 contractBalance = amount;
        uint256 liquidityTokens = contractBalance * (buyFeeSettings.liquidity + sellFeeSettings.liquidity) / (buyFeeSettings.revenue + buyFeeSettings.liquidity + sellFeeSettings.revenue + sellFeeSettings.liquidity);
        uint256 marketingTokens = contractBalance * (buyFeeSettings.revenue + sellFeeSettings.revenue) / (buyFeeSettings.revenue + buyFeeSettings.liquidity + sellFeeSettings.revenue + sellFeeSettings.liquidity);
        uint256 totalTokensToSwap = liquidityTokens + marketingTokens;

        uint256 tokensForLiquidity = liquidityTokens.div(2);
        uint256 amountToSwapForETH = contractBalance.sub(tokensForLiquidity);
        uint256 initialETHBalance = address(this).balance;
        swapTokensForEth(amountToSwapForETH);
        uint256 ethBalance = address(this).balance.sub(initialETHBalance);

        uint256 ethForLiquidity = ethBalance.mul(liquidityTokens).div(totalTokensToSwap);
        addLiquidity(tokensForLiquidity, ethForLiquidity);
        payable(revenueFeeAddress).transfer(address(this).balance);
    }

    function swapTokensForEth(uint256 tokenAmount) private {
        address[] memory path = new address[](2);
        path[0] = address(this);
        path[1] = uniRouterV02.WETH();

        _approve(address(this), address(uniRouterV02), tokenAmount);

        uniRouterV02.swapExactTokensForETHSupportingFeeOnTransferTokens(
            tokenAmount,
            0,
            path,
            address(this),
            block.timestamp
        );
    }

    function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
        _approve(address(this), address(uniRouterV02), tokenAmount);

        uniRouterV02.addLiquidityETH{value: ethAmount} (
            address(this),
            tokenAmount,
            0,
            0,
            liquidityFeeAddress,
            block.timestamp
        );
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"marketingAddress","type":"address"},{"internalType":"address","name":"liquidityAddress","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"tokensSwapped","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"ethReceived","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"tokensIntoLiquidity","type":"uint256"}],"name":"SwapAndLiquify","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"_maxAmountPerTx","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"_maxAmountPerWallet","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"buyFeeSettings","outputs":[{"internalType":"uint256","name":"liquidity","type":"uint256"},{"internalType":"uint256","name":"revenue","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"pure","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"enableTrading","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"bool","name":"excluded","type":"bool"}],"name":"excludeFromFees","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"forceSwapCounter","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"isExcludedFromFee","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"isTradingEnabled","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"liquidityFeeAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"revenueFeeAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"sellFeeSettings","outputs":[{"internalType":"uint256","name":"liquidity","type":"uint256"},{"internalType":"uint256","name":"revenue","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_buyMarketingFee","type":"uint256"},{"internalType":"uint256","name":"_buyLiquidityFee","type":"uint256"},{"internalType":"uint256","name":"_sellMarketingFee","type":"uint256"},{"internalType":"uint256","name":"_sellLiquidityFee","type":"uint256"}],"name":"setMaxFeeSetting","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_maxTx","type":"uint256"},{"internalType":"uint256","name":"_maxWallet","type":"uint256"}],"name":"setMaxTxSetting","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"swapTokenThreshold","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"uniRouterV02","outputs":[{"internalType":"contract IUniswapV2Router02","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"uniswap02Pair","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"stateMutability":"payable","type":"receive"}]

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