Contract

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;

import {IERC20Metadata} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import {IGasOracle} from "./interfaces/IGasOracle.sol";
import {ITokenMessenger} from "./interfaces/cctp/ITokenMessenger.sol";
import {IMessageTransmitter} from "./interfaces/cctp/IMessageTransmitter.sol";
import {GasUsage} from "./GasUsage.sol";

contract CctpBridge is GasUsage {
    using SafeERC20 for IERC20Metadata;

    uint internal constant ORACLE_PRECISION = 18;
    uint internal constant BP = 1e4;

    uint public immutable chainId;
    // Admin fee share (in basis points)
    uint public adminFeeShareBP;
    IERC20Metadata private immutable token;
    ITokenMessenger private immutable cctpMessenger;
    IMessageTransmitter private immutable cctpTransmitter;
    // precomputed value of the scaling factor required for converting the stable token to gas amount
    uint private immutable stableTokensForGasScalingFactor;
    // precomputed value to divide by to change the precision from the Gas Oracle precision to the stable token precision
    uint private immutable fromGasOracleScalingFactor;

    mapping(uint chainId => uint domainNumber) private chainIdDomainMap;

    /**
     * @notice Emitted when the contract receives some gas directly.
     */
    event ReceivedGas(address sender, uint amount);

    /**
     * @notice Emitted when the contract sends some extra gas to the recipient of tokens.
     */
    event ReceivedExtraGas(address recipient, uint amount);

    /**
     * @notice Emitted when tokens are sent on the source blockchain.
     */
    event TokensSent(
        uint amount,
        address sender,
        bytes32 recipient,
        uint destinationChainId,
        uint nonce,
        uint receivedRelayerFeeFromGas,
        uint receivedRelayerFeeFromTokens,
        uint relayerFee,
        uint receivedRelayerFeeTokenAmount,
        uint adminFeeTokenAmount
    );

    constructor(
        uint chainId_,
        uint chainPrecision_,
        address tokenAddress,
        address cctpMessenger_,
        address cctpTransmitter_,
        IGasOracle gasOracle_
    ) GasUsage(gasOracle_) {
        chainId = chainId_;
        token = IERC20Metadata(tokenAddress);
        uint tokenDecimals = token.decimals();
        cctpMessenger = ITokenMessenger(cctpMessenger_);
        cctpTransmitter = IMessageTransmitter(cctpTransmitter_);
        token.approve(cctpMessenger_, type(uint256).max);
        stableTokensForGasScalingFactor = 10 ** (ORACLE_PRECISION - tokenDecimals + chainPrecision_);
        fromGasOracleScalingFactor = 10 ** (ORACLE_PRECISION - tokenDecimals);
    }

    /**
     * @notice Initiates a bridging process of the token to another blockchain.
     * @dev This function is used to initiate a cross-chain transfer.
     * The bridging fee required for the cross-chain transfer can be paid in two ways:
     * - by sending the required amount of native gas token along with the transaction
     *   (See `getTransactionCost` in the `GasUsage` contract).
     * - by setting the parameter `relayerFeeTokenAmount` with the amount of bridging fee in tokens
     *   (See the function `getBridgingCostInTokens`).
     * @param amount The amount of tokens to send (including `relayerFeeTokenAmount`).
     * @param recipient The recipient address.
     * @param destinationChainId The ID of the destination chain.
     * @param relayerFeeTokenAmount The amount of tokens to be deducted from the transferred amount as a bridging fee.
     */
    function bridge(
        uint amount,
        bytes32 recipient,
        uint destinationChainId,
        uint relayerFeeTokenAmount
    ) external payable {
        require(amount > relayerFeeTokenAmount, "CCTP: Amount <= relayer fee");
        require(recipient != 0, "CCTP: Recipient must be nonzero");
        token.safeTransferFrom(msg.sender, address(this), amount);
        uint gasFromStables = _getStableTokensValueInGas(relayerFeeTokenAmount);
        uint relayerFee = this.getTransactionCost(destinationChainId);
        require(msg.value + gasFromStables >= relayerFee, "CCTP: Not enough fee");
        uint amountToSend = amount - relayerFeeTokenAmount;
        uint adminFee;
        if (adminFeeShareBP != 0) {
            adminFee = (amountToSend * adminFeeShareBP) / BP;
            if (adminFee == 0) {
                adminFee = 1;
            }
            amountToSend -= adminFee;
        }
        uint32 destinationDomain = getDomainByChainId(destinationChainId);
        uint64 nonce = cctpMessenger.depositForBurn(amountToSend, destinationDomain, recipient, address(token));
        emit TokensSent(
            amountToSend,
            msg.sender,
            recipient,
            destinationChainId,
            nonce,
            msg.value,
            gasFromStables,
            relayerFee,
            relayerFeeTokenAmount,
            adminFee
        );
    }

    /**
     * @notice Completes the bridging process by sending the tokens on the destination blockchain to the recipient.
     * @param recipient The recipient address.
     * @param message The message information emitted by the CCTP contract `MessageTransmitter` on the source chain.
     * @param signature Concatenated 65-byte signature(s) of `message`.
     */
    function receiveTokens(address recipient, bytes calldata message, bytes calldata signature) external payable {
        require(cctpTransmitter.receiveMessage(message, signature), "CCTP: Receive message failed");
        // pass extra gas to the recipient
        if (msg.value > 0) {
            (bool sent, ) = payable(recipient).call{value: msg.value}("");
            if (sent) {
                emit ReceivedExtraGas(recipient, msg.value);
            }
        }
    }

    /**
     * @notice Allows the admin to add new supported chain destination.
     * @param chainId_ The chain ID of the destination to register.
     * @param domain The domain of the destination to register.
     */
    function registerBridgeDestination(uint chainId_, uint32 domain) external onlyOwner {
        chainIdDomainMap[chainId_] = domain + 1;
    }

    /**
     * @notice Allows the admin to remove a chain from the map of supported destinations.
     * @param chainId_ The chain ID of the destination to unregister.
     */
    function unregisterBridgeDestination(uint chainId_) external onlyOwner {
        chainIdDomainMap[chainId_] = 0;
    }

    /**
     * @notice Allows the admin to withdraw the relayer fee collected in gas tokens.
     */
    function withdrawGas(uint amount) external onlyOwner {
        payable(msg.sender).transfer(amount);
    }

    /**
     * @notice Allows the admin to withdraw the admin fee and relayer fee collected in tokens.
     */
    function withdrawFeeInTokens() external onlyOwner {
        uint toWithdraw = token.balanceOf(address(this));
        if (toWithdraw > 0) {
            token.safeTransfer(msg.sender, toWithdraw);
        }
    }

    /**
     * @notice Sets the basis points of the admin fee share from each bridge.
     */
    function setAdminFeeShare(uint adminFeeShareBP_) external onlyOwner {
        require(adminFeeShareBP_ <= BP, "CCTP: Too high");
        adminFeeShareBP = adminFeeShareBP_;
    }

    /**
     * @notice Calculates the amount of bridging fee nominated in the stable token.
     * @param destinationChainId The ID of the destination chain.
     * @return The total price of bridging, with the precision according to the token's `decimals()` value.
     */
    function getBridgingCostInTokens(uint destinationChainId) external view returns (uint) {
        return
            gasOracle.getTransactionGasCostInUSD(destinationChainId, gasUsage[destinationChainId]) /
            fromGasOracleScalingFactor;
    }

    function isMessageProcessed(uint sourceChainId, uint64 nonce) external view returns (bool) {
        return cctpTransmitter.usedNonces(_hashSourceAndNonce(getDomainByChainId(sourceChainId), nonce)) != 0;
    }

    function getDomainByChainId(uint chainId_) public view returns (uint32) {
        uint domainNumber = chainIdDomainMap[chainId_];
        require(domainNumber > 0, "CCTP: Unknown chain id");
        return uint32(domainNumber - 1);
    }

    /**
     * @notice Calculates the amount of gas equivalent in value to provided amount of tokens
     * according to the current exchange rate.
     * @param stableTokenAmount The amount of tokens.
     * @return amount of gas tokens.
     */
    function _getStableTokensValueInGas(uint stableTokenAmount) internal view returns (uint) {
        if (stableTokenAmount == 0) return 0;
        return (stableTokensForGasScalingFactor * stableTokenAmount) / gasOracle.price(chainId);
    }

    function _hashSourceAndNonce(uint32 sourceDomain, uint64 nonce) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(sourceDomain, nonce));
    }

    fallback() external payable {
        revert("Unsupported");
    }

    receive() external payable {
        emit ReceivedGas(msg.sender, msg.value);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10**64) {
                value /= 10**64;
                result += 64;
            }
            if (value >= 10**32) {
                value /= 10**32;
                result += 32;
            }
            if (value >= 10**16) {
                value /= 10**16;
                result += 16;
            }
            if (value >= 10**8) {
                value /= 10**8;
                result += 8;
            }
            if (value >= 10**4) {
                value /= 10**4;
                result += 4;
            }
            if (value >= 10**2) {
                value /= 10**2;
                result += 2;
            }
            if (value >= 10**1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SafeCast.sol)
// This file was procedurally generated from scripts/generate/templates/SafeCast.js.

pragma solidity ^0.8.0;

/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 *
 * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
 * all math on `uint256` and `int256` and then downcasting.
 */
library SafeCast {
    /**
     * @dev Returns the downcasted uint248 from uint256, reverting on
     * overflow (when the input is greater than largest uint248).
     *
     * Counterpart to Solidity's `uint248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     *
     * _Available since v4.7._
     */
    function toUint248(uint256 value) internal pure returns (uint248) {
        require(value <= type(uint248).max, "SafeCast: value doesn't fit in 248 bits");
        return uint248(value);
    }

    /**
     * @dev Returns the downcasted uint240 from uint256, reverting on
     * overflow (when the input is greater than largest uint240).
     *
     * Counterpart to Solidity's `uint240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     *
     * _Available since v4.7._
     */
    function toUint240(uint256 value) internal pure returns (uint240) {
        require(value <= type(uint240).max, "SafeCast: value doesn't fit in 240 bits");
        return uint240(value);
    }

    /**
     * @dev Returns the downcasted uint232 from uint256, reverting on
     * overflow (when the input is greater than largest uint232).
     *
     * Counterpart to Solidity's `uint232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     *
     * _Available since v4.7._
     */
    function toUint232(uint256 value) internal pure returns (uint232) {
        require(value <= type(uint232).max, "SafeCast: value doesn't fit in 232 bits");
        return uint232(value);
    }

    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     *
     * _Available since v4.2._
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint216 from uint256, reverting on
     * overflow (when the input is greater than largest uint216).
     *
     * Counterpart to Solidity's `uint216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     *
     * _Available since v4.7._
     */
    function toUint216(uint256 value) internal pure returns (uint216) {
        require(value <= type(uint216).max, "SafeCast: value doesn't fit in 216 bits");
        return uint216(value);
    }

    /**
     * @dev Returns the downcasted uint208 from uint256, reverting on
     * overflow (when the input is greater than largest uint208).
     *
     * Counterpart to Solidity's `uint208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     *
     * _Available since v4.7._
     */
    function toUint208(uint256 value) internal pure returns (uint208) {
        require(value <= type(uint208).max, "SafeCast: value doesn't fit in 208 bits");
        return uint208(value);
    }

    /**
     * @dev Returns the downcasted uint200 from uint256, reverting on
     * overflow (when the input is greater than largest uint200).
     *
     * Counterpart to Solidity's `uint200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     *
     * _Available since v4.7._
     */
    function toUint200(uint256 value) internal pure returns (uint200) {
        require(value <= type(uint200).max, "SafeCast: value doesn't fit in 200 bits");
        return uint200(value);
    }

    /**
     * @dev Returns the downcasted uint192 from uint256, reverting on
     * overflow (when the input is greater than largest uint192).
     *
     * Counterpart to Solidity's `uint192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     *
     * _Available since v4.7._
     */
    function toUint192(uint256 value) internal pure returns (uint192) {
        require(value <= type(uint192).max, "SafeCast: value doesn't fit in 192 bits");
        return uint192(value);
    }

    /**
     * @dev Returns the downcasted uint184 from uint256, reverting on
     * overflow (when the input is greater than largest uint184).
     *
     * Counterpart to Solidity's `uint184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     *
     * _Available since v4.7._
     */
    function toUint184(uint256 value) internal pure returns (uint184) {
        require(value <= type(uint184).max, "SafeCast: value doesn't fit in 184 bits");
        return uint184(value);
    }

    /**
     * @dev Returns the downcasted uint176 from uint256, reverting on
     * overflow (when the input is greater than largest uint176).
     *
     * Counterpart to Solidity's `uint176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     *
     * _Available since v4.7._
     */
    function toUint176(uint256 value) internal pure returns (uint176) {
        require(value <= type(uint176).max, "SafeCast: value doesn't fit in 176 bits");
        return uint176(value);
    }

    /**
     * @dev Returns the downcasted uint168 from uint256, reverting on
     * overflow (when the input is greater than largest uint168).
     *
     * Counterpart to Solidity's `uint168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     *
     * _Available since v4.7._
     */
    function toUint168(uint256 value) internal pure returns (uint168) {
        require(value <= type(uint168).max, "SafeCast: value doesn't fit in 168 bits");
        return uint168(value);
    }

    /**
     * @dev Returns the downcasted uint160 from uint256, reverting on
     * overflow (when the input is greater than largest uint160).
     *
     * Counterpart to Solidity's `uint160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     *
     * _Available since v4.7._
     */
    function toUint160(uint256 value) internal pure returns (uint160) {
        require(value <= type(uint160).max, "SafeCast: value doesn't fit in 160 bits");
        return uint160(value);
    }

    /**
     * @dev Returns the downcasted uint152 from uint256, reverting on
     * overflow (when the input is greater than largest uint152).
     *
     * Counterpart to Solidity's `uint152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     *
     * _Available since v4.7._
     */
    function toUint152(uint256 value) internal pure returns (uint152) {
        require(value <= type(uint152).max, "SafeCast: value doesn't fit in 152 bits");
        return uint152(value);
    }

    /**
     * @dev Returns the downcasted uint144 from uint256, reverting on
     * overflow (when the input is greater than largest uint144).
     *
     * Counterpart to Solidity's `uint144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     *
     * _Available since v4.7._
     */
    function toUint144(uint256 value) internal pure returns (uint144) {
        require(value <= type(uint144).max, "SafeCast: value doesn't fit in 144 bits");
        return uint144(value);
    }

    /**
     * @dev Returns the downcasted uint136 from uint256, reverting on
     * overflow (when the input is greater than largest uint136).
     *
     * Counterpart to Solidity's `uint136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     *
     * _Available since v4.7._
     */
    function toUint136(uint256 value) internal pure returns (uint136) {
        require(value <= type(uint136).max, "SafeCast: value doesn't fit in 136 bits");
        return uint136(value);
    }

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v2.5._
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint120 from uint256, reverting on
     * overflow (when the input is greater than largest uint120).
     *
     * Counterpart to Solidity's `uint120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     *
     * _Available since v4.7._
     */
    function toUint120(uint256 value) internal pure returns (uint120) {
        require(value <= type(uint120).max, "SafeCast: value doesn't fit in 120 bits");
        return uint120(value);
    }

    /**
     * @dev Returns the downcasted uint112 from uint256, reverting on
     * overflow (when the input is greater than largest uint112).
     *
     * Counterpart to Solidity's `uint112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     *
     * _Available since v4.7._
     */
    function toUint112(uint256 value) internal pure returns (uint112) {
        require(value <= type(uint112).max, "SafeCast: value doesn't fit in 112 bits");
        return uint112(value);
    }

    /**
     * @dev Returns the downcasted uint104 from uint256, reverting on
     * overflow (when the input is greater than largest uint104).
     *
     * Counterpart to Solidity's `uint104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     *
     * _Available since v4.7._
     */
    function toUint104(uint256 value) internal pure returns (uint104) {
        require(value <= type(uint104).max, "SafeCast: value doesn't fit in 104 bits");
        return uint104(value);
    }

    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     *
     * _Available since v4.2._
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
        return uint96(value);
    }

    /**
     * @dev Returns the downcasted uint88 from uint256, reverting on
     * overflow (when the input is greater than largest uint88).
     *
     * Counterpart to Solidity's `uint88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     *
     * _Available since v4.7._
     */
    function toUint88(uint256 value) internal pure returns (uint88) {
        require(value <= type(uint88).max, "SafeCast: value doesn't fit in 88 bits");
        return uint88(value);
    }

    /**
     * @dev Returns the downcasted uint80 from uint256, reverting on
     * overflow (when the input is greater than largest uint80).
     *
     * Counterpart to Solidity's `uint80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     *
     * _Available since v4.7._
     */
    function toUint80(uint256 value) internal pure returns (uint80) {
        require(value <= type(uint80).max, "SafeCast: value doesn't fit in 80 bits");
        return uint80(value);
    }

    /**
     * @dev Returns the downcasted uint72 from uint256, reverting on
     * overflow (when the input is greater than largest uint72).
     *
     * Counterpart to Solidity's `uint72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     *
     * _Available since v4.7._
     */
    function toUint72(uint256 value) internal pure returns (uint72) {
        require(value <= type(uint72).max, "SafeCast: value doesn't fit in 72 bits");
        return uint72(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v2.5._
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint56 from uint256, reverting on
     * overflow (when the input is greater than largest uint56).
     *
     * Counterpart to Solidity's `uint56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     *
     * _Available since v4.7._
     */
    function toUint56(uint256 value) internal pure returns (uint56) {
        require(value <= type(uint56).max, "SafeCast: value doesn't fit in 56 bits");
        return uint56(value);
    }

    /**
     * @dev Returns the downcasted uint48 from uint256, reverting on
     * overflow (when the input is greater than largest uint48).
     *
     * Counterpart to Solidity's `uint48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     *
     * _Available since v4.7._
     */
    function toUint48(uint256 value) internal pure returns (uint48) {
        require(value <= type(uint48).max, "SafeCast: value doesn't fit in 48 bits");
        return uint48(value);
    }

    /**
     * @dev Returns the downcasted uint40 from uint256, reverting on
     * overflow (when the input is greater than largest uint40).
     *
     * Counterpart to Solidity's `uint40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     *
     * _Available since v4.7._
     */
    function toUint40(uint256 value) internal pure returns (uint40) {
        require(value <= type(uint40).max, "SafeCast: value doesn't fit in 40 bits");
        return uint40(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v2.5._
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint24 from uint256, reverting on
     * overflow (when the input is greater than largest uint24).
     *
     * Counterpart to Solidity's `uint24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     *
     * _Available since v4.7._
     */
    function toUint24(uint256 value) internal pure returns (uint24) {
        require(value <= type(uint24).max, "SafeCast: value doesn't fit in 24 bits");
        return uint24(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v2.5._
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     *
     * _Available since v2.5._
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     *
     * _Available since v3.0._
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        require(value >= 0, "SafeCast: value must be positive");
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int248 from int256, reverting on
     * overflow (when the input is less than smallest int248 or
     * greater than largest int248).
     *
     * Counterpart to Solidity's `int248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     *
     * _Available since v4.7._
     */
    function toInt248(int256 value) internal pure returns (int248 downcasted) {
        downcasted = int248(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 248 bits");
    }

    /**
     * @dev Returns the downcasted int240 from int256, reverting on
     * overflow (when the input is less than smallest int240 or
     * greater than largest int240).
     *
     * Counterpart to Solidity's `int240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     *
     * _Available since v4.7._
     */
    function toInt240(int256 value) internal pure returns (int240 downcasted) {
        downcasted = int240(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 240 bits");
    }

    /**
     * @dev Returns the downcasted int232 from int256, reverting on
     * overflow (when the input is less than smallest int232 or
     * greater than largest int232).
     *
     * Counterpart to Solidity's `int232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     *
     * _Available since v4.7._
     */
    function toInt232(int256 value) internal pure returns (int232 downcasted) {
        downcasted = int232(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 232 bits");
    }

    /**
     * @dev Returns the downcasted int224 from int256, reverting on
     * overflow (when the input is less than smallest int224 or
     * greater than largest int224).
     *
     * Counterpart to Solidity's `int224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     *
     * _Available since v4.7._
     */
    function toInt224(int256 value) internal pure returns (int224 downcasted) {
        downcasted = int224(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 224 bits");
    }

    /**
     * @dev Returns the downcasted int216 from int256, reverting on
     * overflow (when the input is less than smallest int216 or
     * greater than largest int216).
     *
     * Counterpart to Solidity's `int216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     *
     * _Available since v4.7._
     */
    function toInt216(int256 value) internal pure returns (int216 downcasted) {
        downcasted = int216(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 216 bits");
    }

    /**
     * @dev Returns the downcasted int208 from int256, reverting on
     * overflow (when the input is less than smallest int208 or
     * greater than largest int208).
     *
     * Counterpart to Solidity's `int208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     *
     * _Available since v4.7._
     */
    function toInt208(int256 value) internal pure returns (int208 downcasted) {
        downcasted = int208(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 208 bits");
    }

    /**
     * @dev Returns the downcasted int200 from int256, reverting on
     * overflow (when the input is less than smallest int200 or
     * greater than largest int200).
     *
     * Counterpart to Solidity's `int200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     *
     * _Available since v4.7._
     */
    function toInt200(int256 value) internal pure returns (int200 downcasted) {
        downcasted = int200(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 200 bits");
    }

    /**
     * @dev Returns the downcasted int192 from int256, reverting on
     * overflow (when the input is less than smallest int192 or
     * greater than largest int192).
     *
     * Counterpart to Solidity's `int192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     *
     * _Available since v4.7._
     */
    function toInt192(int256 value) internal pure returns (int192 downcasted) {
        downcasted = int192(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 192 bits");
    }

    /**
     * @dev Returns the downcasted int184 from int256, reverting on
     * overflow (when the input is less than smallest int184 or
     * greater than largest int184).
     *
     * Counterpart to Solidity's `int184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     *
     * _Available since v4.7._
     */
    function toInt184(int256 value) internal pure returns (int184 downcasted) {
        downcasted = int184(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 184 bits");
    }

    /**
     * @dev Returns the downcasted int176 from int256, reverting on
     * overflow (when the input is less than smallest int176 or
     * greater than largest int176).
     *
     * Counterpart to Solidity's `int176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     *
     * _Available since v4.7._
     */
    function toInt176(int256 value) internal pure returns (int176 downcasted) {
        downcasted = int176(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 176 bits");
    }

    /**
     * @dev Returns the downcasted int168 from int256, reverting on
     * overflow (when the input is less than smallest int168 or
     * greater than largest int168).
     *
     * Counterpart to Solidity's `int168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     *
     * _Available since v4.7._
     */
    function toInt168(int256 value) internal pure returns (int168 downcasted) {
        downcasted = int168(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 168 bits");
    }

    /**
     * @dev Returns the downcasted int160 from int256, reverting on
     * overflow (when the input is less than smallest int160 or
     * greater than largest int160).
     *
     * Counterpart to Solidity's `int160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     *
     * _Available since v4.7._
     */
    function toInt160(int256 value) internal pure returns (int160 downcasted) {
        downcasted = int160(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 160 bits");
    }

    /**
     * @dev Returns the downcasted int152 from int256, reverting on
     * overflow (when the input is less than smallest int152 or
     * greater than largest int152).
     *
     * Counterpart to Solidity's `int152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     *
     * _Available since v4.7._
     */
    function toInt152(int256 value) internal pure returns (int152 downcasted) {
        downcasted = int152(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 152 bits");
    }

    /**
     * @dev Returns the downcasted int144 from int256, reverting on
     * overflow (when the input is less than smallest int144 or
     * greater than largest int144).
     *
     * Counterpart to Solidity's `int144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     *
     * _Available since v4.7._
     */
    function toInt144(int256 value) internal pure returns (int144 downcasted) {
        downcasted = int144(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 144 bits");
    }

    /**
     * @dev Returns the downcasted int136 from int256, reverting on
     * overflow (when the input is less than smallest int136 or
     * greater than largest int136).
     *
     * Counterpart to Solidity's `int136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     *
     * _Available since v4.7._
     */
    function toInt136(int256 value) internal pure returns (int136 downcasted) {
        downcasted = int136(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 136 bits");
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v3.1._
     */
    function toInt128(int256 value) internal pure returns (int128 downcasted) {
        downcasted = int128(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 128 bits");
    }

    /**
     * @dev Returns the downcasted int120 from int256, reverting on
     * overflow (when the input is less than smallest int120 or
     * greater than largest int120).
     *
     * Counterpart to Solidity's `int120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     *
     * _Available since v4.7._
     */
    function toInt120(int256 value) internal pure returns (int120 downcasted) {
        downcasted = int120(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 120 bits");
    }

    /**
     * @dev Returns the downcasted int112 from int256, reverting on
     * overflow (when the input is less than smallest int112 or
     * greater than largest int112).
     *
     * Counterpart to Solidity's `int112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     *
     * _Available since v4.7._
     */
    function toInt112(int256 value) internal pure returns (int112 downcasted) {
        downcasted = int112(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 112 bits");
    }

    /**
     * @dev Returns the downcasted int104 from int256, reverting on
     * overflow (when the input is less than smallest int104 or
     * greater than largest int104).
     *
     * Counterpart to Solidity's `int104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     *
     * _Available since v4.7._
     */
    function toInt104(int256 value) internal pure returns (int104 downcasted) {
        downcasted = int104(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 104 bits");
    }

    /**
     * @dev Returns the downcasted int96 from int256, reverting on
     * overflow (when the input is less than smallest int96 or
     * greater than largest int96).
     *
     * Counterpart to Solidity's `int96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     *
     * _Available since v4.7._
     */
    function toInt96(int256 value) internal pure returns (int96 downcasted) {
        downcasted = int96(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 96 bits");
    }

    /**
     * @dev Returns the downcasted int88 from int256, reverting on
     * overflow (when the input is less than smallest int88 or
     * greater than largest int88).
     *
     * Counterpart to Solidity's `int88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     *
     * _Available since v4.7._
     */
    function toInt88(int256 value) internal pure returns (int88 downcasted) {
        downcasted = int88(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 88 bits");
    }

    /**
     * @dev Returns the downcasted int80 from int256, reverting on
     * overflow (when the input is less than smallest int80 or
     * greater than largest int80).
     *
     * Counterpart to Solidity's `int80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     *
     * _Available since v4.7._
     */
    function toInt80(int256 value) internal pure returns (int80 downcasted) {
        downcasted = int80(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 80 bits");
    }

    /**
     * @dev Returns the downcasted int72 from int256, reverting on
     * overflow (when the input is less than smallest int72 or
     * greater than largest int72).
     *
     * Counterpart to Solidity's `int72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     *
     * _Available since v4.7._
     */
    function toInt72(int256 value) internal pure returns (int72 downcasted) {
        downcasted = int72(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 72 bits");
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v3.1._
     */
    function toInt64(int256 value) internal pure returns (int64 downcasted) {
        downcasted = int64(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 64 bits");
    }

    /**
     * @dev Returns the downcasted int56 from int256, reverting on
     * overflow (when the input is less than smallest int56 or
     * greater than largest int56).
     *
     * Counterpart to Solidity's `int56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     *
     * _Available since v4.7._
     */
    function toInt56(int256 value) internal pure returns (int56 downcasted) {
        downcasted = int56(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 56 bits");
    }

    /**
     * @dev Returns the downcasted int48 from int256, reverting on
     * overflow (when the input is less than smallest int48 or
     * greater than largest int48).
     *
     * Counterpart to Solidity's `int48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     *
     * _Available since v4.7._
     */
    function toInt48(int256 value) internal pure returns (int48 downcasted) {
        downcasted = int48(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 48 bits");
    }

    /**
     * @dev Returns the downcasted int40 from int256, reverting on
     * overflow (when the input is less than smallest int40 or
     * greater than largest int40).
     *
     * Counterpart to Solidity's `int40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     *
     * _Available since v4.7._
     */
    function toInt40(int256 value) internal pure returns (int40 downcasted) {
        downcasted = int40(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 40 bits");
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v3.1._
     */
    function toInt32(int256 value) internal pure returns (int32 downcasted) {
        downcasted = int32(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 32 bits");
    }

    /**
     * @dev Returns the downcasted int24 from int256, reverting on
     * overflow (when the input is less than smallest int24 or
     * greater than largest int24).
     *
     * Counterpart to Solidity's `int24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     *
     * _Available since v4.7._
     */
    function toInt24(int256 value) internal pure returns (int24 downcasted) {
        downcasted = int24(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 24 bits");
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v3.1._
     */
    function toInt16(int256 value) internal pure returns (int16 downcasted) {
        downcasted = int16(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 16 bits");
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     *
     * _Available since v3.1._
     */
    function toInt8(int256 value) internal pure returns (int8 downcasted) {
        downcasted = int8(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 8 bits");
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     *
     * _Available since v3.0._
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
        return int256(value);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;

import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import {IGasOracle} from "./interfaces/IGasOracle.sol";

/**
 * @dev Contract module which allows children to store typical gas usage of a certain transaction on another chain.
 */
abstract contract GasUsage is Ownable {
    IGasOracle internal gasOracle;
    mapping(uint chainId => uint amount) public gasUsage;

    constructor(IGasOracle gasOracle_) {
        gasOracle = gasOracle_;
    }

    /**
     * @dev Sets the amount of gas used for a transaction on a given chain.
     * @param chainId The ID of the chain.
     * @param gasAmount The amount of gas used on the chain.
     */
    function setGasUsage(uint chainId, uint gasAmount) external onlyOwner {
        gasUsage[chainId] = gasAmount;
    }

    /**
     * @dev Sets the Gas Oracle contract address.
     * @param gasOracle_ The address of the Gas Oracle contract.
     */
    function setGasOracle(IGasOracle gasOracle_) external onlyOwner {
        gasOracle = gasOracle_;
    }

    /**
     * @notice Get the gas cost of a transaction on another chain in the current chain's native token.
     * @param chainId The ID of the chain for which to get the gas cost.
     * @return The calculated gas cost of the transaction in the current chain's native token
     */
    function getTransactionCost(uint chainId) external view returns (uint) {
        unchecked {
            return gasOracle.getTransactionGasCostInNativeToken(chainId, gasUsage[chainId]);
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;

import {IReceiver} from "./IReceiver.sol";

interface IMessageTransmitter is IReceiver {
    function usedNonces(bytes32 _sourceAndNonce) external view returns (uint256);
}

// SPDX-License-Identifier: Apache-2.0
/*
 * Copyright (c) 2022, Circle Internet Financial Limited.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity ^0.8.18;

/**
 * @title IReceiver
 * @notice Receives messages on destination chain and forwards them to IMessageDestinationHandler
 */
interface IReceiver {
    /**
     * @notice Receives an incoming message, validating the header and passing
     * the body to application-specific handler.
     * @param message The message raw bytes
     * @param signature The message signature
     * @return success bool, true if successful
     */
    function receiveMessage(bytes calldata message, bytes calldata signature) external returns (bool success);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;

interface ITokenMessenger {
    /**
     * @notice Deposits and burns tokens from sender to be minted on destination domain.
     * Emits a `DepositForBurn` event.
     * @dev reverts if:
     * - given burnToken is not supported
     * - given destinationDomain has no TokenMessenger registered
     * - transferFrom() reverts. For example, if sender's burnToken balance or approved allowance
     * to this contract is less than `amount`.
     * - burn() reverts. For example, if `amount` is 0.
     * - MessageTransmitter returns false or reverts.
     * @param amount amount of tokens to burn
     * @param destinationDomain destination domain
     * @param mintRecipient address of mint recipient on destination domain
     * @param burnToken address of contract to burn deposited tokens, on local domain
     * @return _nonce unique nonce reserved by message
     */
    function depositForBurn(
        uint amount,
        uint32 destinationDomain,
        bytes32 mintRecipient,
        address burnToken
    ) external returns (uint64 _nonce);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;

enum MessengerProtocol {
    None,
    Allbridge,
    Wormhole,
    LayerZero
}

interface IBridge {
    function chainId() external view returns (uint);

    function processedMessages(bytes32) external view returns (uint);

    function sentMessages(bytes32) external view returns (uint);

    function otherBridges(uint) external view returns (bytes32);

    function otherBridgeTokens(uint, bytes32) external view returns (bool);

    function getBridgingCostInTokens(
        uint destinationChainId,
        MessengerProtocol messenger,
        address tokenAddress
    ) external view returns (uint);

    function hashMessage(
        uint amount,
        bytes32 recipient,
        uint sourceChainId,
        uint destinationChainId,
        bytes32 receiveToken,
        uint nonce,
        MessengerProtocol messenger
    ) external pure returns (bytes32);

    function receiveTokens(
        uint amount,
        bytes32 recipient,
        uint sourceChainId,
        bytes32 receiveToken,
        uint nonce,
        MessengerProtocol messenger,
        uint receiveAmountMin
    ) external payable;

    function withdrawGasTokens(uint amount) external;

    function registerBridge(uint chainId, bytes32 bridgeAddress) external;

    function addBridgeToken(uint chainId, bytes32 tokenAddress) external;

    function removeBridgeToken(uint chainId, bytes32 tokenAddress) external;

    function swapAndBridge(
        bytes32 token,
        uint amount,
        bytes32 recipient,
        uint destinationChainId,
        bytes32 receiveToken,
        uint nonce,
        MessengerProtocol messenger,
        uint feeTokenAmount
    ) external payable;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;

interface IGasOracle {
    function chainData(uint chainId) external view returns (uint128 price, uint128 gasPrice);

    function chainId() external view returns (uint);

    function crossRate(uint otherChainId) external view returns (uint);

    function getTransactionGasCostInNativeToken(uint otherChainId, uint256 gasAmount) external view returns (uint);

    function getTransactionGasCostInUSD(uint otherChainId, uint256 gasAmount) external view returns (uint);

    function price(uint chainId) external view returns (uint);

    function setChainData(uint chainId, uint128 price, uint128 gasPrice) external;

    function setGasPrice(uint chainId, uint128 gasPrice) external;

    function setPrice(uint chainId, uint128 price) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;

import {MessengerProtocol} from "./IBridge.sol";

interface IRouter {
    function canSwap() external view returns (uint8);

    function swap(uint amount, bytes32 token, bytes32 receiveToken, address recipient, uint receiveAmountMin) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;

import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {Math} from "@openzeppelin/contracts/utils/math/Math.sol";
import {SafeCast} from "@openzeppelin/contracts/utils/math/SafeCast.sol";
import {RewardManager} from "./RewardManager.sol";

/**
 * 4AD - D = 4A(x + y) - (D³ / 4xy)
 * X - is value of real stable token
 * Y - is value of virtual usd
 */
contract Pool is RewardManager {
    using SafeERC20 for ERC20;
    uint private constant SYSTEM_PRECISION = 3;
    int private constant PP = 1e4; // Price Precision
    uint private constant MAX_TOKEN_BALANCE = 2 ** 40; // Max possible token balance

    /**
     * @dev Gas optimization: both the 'feeShareBP' and 'router' fields are used during the 'swapFromVUsd', 'swapToVUsd'
     * operations and can occupy the same slot.
     */
    uint16 public feeShareBP;
    address public router;
    uint public tokenBalance;
    uint public vUsdBalance;
    uint public balanceRatioMinBP;
    uint public reserves;
    uint public immutable a;
    uint public d;

    uint private immutable tokenAmountReduce;
    uint private immutable tokenAmountIncrease;

    // can restrict deposit or withdraw operations
    address private stopAuthority;
    // is deposit operation allowed
    uint public canDeposit = 1;
    // is withdraw operation allowed
    uint public canWithdraw = 1;

    event SwappedToVUsd(address sender, address token, uint amount, uint vUsdAmount, uint fee);
    event SwappedFromVUsd(address recipient, address token, uint vUsdAmount, uint amount, uint fee);

    constructor(
        address router_,
        uint a_,
        ERC20 token_,
        uint16 feeShareBP_,
        uint balanceRatioMinBP_,
        string memory lpName,
        string memory lpSymbol
    ) RewardManager(token_, lpName, lpSymbol) {
        a = a_;
        router = router_;
        stopAuthority = owner();
        feeShareBP = feeShareBP_;
        balanceRatioMinBP = balanceRatioMinBP_;

        uint decimals = token_.decimals();
        tokenAmountReduce = decimals > SYSTEM_PRECISION ? 10 ** (decimals - SYSTEM_PRECISION) : 0;
        tokenAmountIncrease = decimals < SYSTEM_PRECISION ? 10 ** (SYSTEM_PRECISION - decimals) : 0;
    }

    /**
     * @dev Throws if called by any account other than the router.
     */
    modifier onlyRouter() {
        require(router == msg.sender, "Pool: is not router");
        _;
    }

    /**
     * @dev Throws if called by any account other than the stopAuthority.
     */
    modifier onlyStopAuthority() {
        require(stopAuthority == msg.sender, "Pool: is not stopAuthority");
        _;
    }

    /**
     * @dev Modifier to prevent function from disbalancing the pool over a threshold defined by `balanceRatioMinBP`
     */
    modifier validateBalanceRatio() {
        _;
        if (tokenBalance > vUsdBalance) {
            require((vUsdBalance * BP) / tokenBalance >= balanceRatioMinBP, "Pool: low vUSD balance");
        } else if (tokenBalance < vUsdBalance) {
            require((tokenBalance * BP) / vUsdBalance >= balanceRatioMinBP, "Pool: low token balance");
        }
    }

    /**
     * @dev Modifier to make a function callable only when the deposit is allowed.
     */
    modifier whenCanDeposit() {
        require(canDeposit == 1, "Pool: deposit prohibited");
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the withdraw is allowed.
     */
    modifier whenCanWithdraw() {
        require(canWithdraw == 1, "Pool: withdraw prohibited");
        _;
    }

    /**
     * @dev Calculates the price and deposit token according to the amount and price, then adds the same amount to the X
     * and to the Y
     * @param amount The deposited amount
     */
    function deposit(uint amount) external whenCanDeposit {
        uint oldD = d;

        uint amountSP = _toSystemPrecision(amount);
        require(amountSP > 0, "Pool: too little");

        token.safeTransferFrom(msg.sender, address(this), amount);

        // Add deposited amount to reserves
        reserves += amountSP;

        uint oldBalance = (tokenBalance + vUsdBalance);
        if (oldD == 0 || oldBalance == 0) {
            // Split balance equally on the first deposit
            uint halfAmount = amountSP >> 1;
            tokenBalance += halfAmount;
            vUsdBalance += halfAmount;
        } else {
            // Add amount proportionally to each pool
            tokenBalance += (amountSP * tokenBalance) / oldBalance;
            vUsdBalance += (amountSP * vUsdBalance) / oldBalance;
        }
        _updateD();
        // Deposit as many LP tokens as the D increase
        _depositLp(msg.sender, d - oldD);

        require(tokenBalance < MAX_TOKEN_BALANCE, "Pool: too much");
    }

    /*
     * @dev Subtracts X and Y for that amount, calculates current price and withdraw the token to the user according to
     * the price
     * @param amount The deposited amount
     */
    function withdraw(uint amountLp) external whenCanWithdraw {
        uint oldD = d;
        _withdrawLp(msg.sender, amountLp);

        // Always withdraw tokens in amount equal to amountLp

        // Withdraw proportionally from token and vUsd balance
        uint oldBalance = (tokenBalance + vUsdBalance);
        tokenBalance -= (amountLp * tokenBalance) / oldBalance;
        vUsdBalance -= (amountLp * vUsdBalance) / oldBalance;

        require(tokenBalance + vUsdBalance < oldBalance, "Pool: zero changes");

        // Check if there is enough funds in reserve to withdraw
        require(amountLp <= reserves, "Pool: reserves");

        // Adjust reserves by withdraw amount
        reserves -= amountLp;

        // Update D and transfer tokens to the sender
        _updateD();
        require(d < oldD, "Pool: zero D changes");

        token.safeTransfer(msg.sender, _fromSystemPrecision(amountLp));
    }

    /**
     * @notice Calculates new virtual USD value from the given amount of tokens.
     * @dev Calculates new Y according to new X.
     * NOTICE: Prior to calling this the router must transfer tokens from the user to the pool.
     * @param amount The amount of tokens to swap.
     * @param zeroFee When true it allows to swap without incurring any fees. It is intended for use with service
     * accounts.
     * @return returns the difference between the old and the new value of vUsdBalance
     */
    function swapToVUsd(
        address user,
        uint amount,
        bool zeroFee
    ) external onlyRouter validateBalanceRatio returns (uint) {
        uint result; // 0 by default
        uint fee;
        if (amount > 0) {
            if (!zeroFee) {
                fee = (amount * feeShareBP) / BP;
            }
            uint amountIn = _toSystemPrecision(amount - fee);
            // Incorporate rounding dust into the fee
            fee = amount - _fromSystemPrecision(amountIn);

            // Adjust token and reserve balances after the fee is applied
            tokenBalance += amountIn;
            reserves += amountIn;

            uint vUsdNewAmount = this.getY(tokenBalance);
            if (vUsdBalance > vUsdNewAmount) {
                result = vUsdBalance - vUsdNewAmount;
            }
            vUsdBalance = vUsdNewAmount;
            _addRewards(fee);
        }

        emit SwappedToVUsd(user, address(token), amount, result, fee);
        return result;
    }

    /**
     * @notice Calculates the amount of tokens from the given virtual USD value, and transfers it to the user.
     * @dev Calculates new X according to new Y.
     * @param user The address of the recipient.
     * @param amount The amount of vUSD to swap.
     * @param receiveAmountMin The minimum amount of tokens required to be received during the swap, otherwise the
     * transaction reverts.
     * @param zeroFee When true it allows to swap without incurring any fees. It is intended for use with service
     * accounts.
     * @return returns the difference between the old and the new value of vUsdBalance
     */
    function swapFromVUsd(
        address user,
        uint amount,
        uint receiveAmountMin,
        bool zeroFee
    ) external onlyRouter validateBalanceRatio returns (uint) {
        uint resultSP; // 0 by default
        uint result; // 0 by default
        uint fee;
        if (amount > 0) {
            vUsdBalance += amount;
            uint newAmount = this.getY(vUsdBalance);
            if (tokenBalance > newAmount) {
                resultSP = tokenBalance - newAmount;
                result = _fromSystemPrecision(resultSP);
            } // Otherwise result/resultSP stay 0

            // Check if there is enough funds in reserve to pay
            require(resultSP <= reserves, "Pool: reserves");
            // Remove from reserves including fee, apply fee later
            reserves -= resultSP;
            if (!zeroFee) {
                fee = (result * feeShareBP) / BP;
            }
            // We can use unchecked here because feeShareBP <= BP
            unchecked {
                result -= fee;
            }

            tokenBalance = newAmount;
            require(result >= receiveAmountMin, "Pool: slippage");
            token.safeTransfer(user, result);
            _addRewards(fee);
        }
        emit SwappedFromVUsd(user, address(token), amount, result, fee);
        return result;
    }

    /**
     * @dev Sets admin fee share.
     */
    function setFeeShare(uint16 feeShareBP_) external onlyOwner {
        require(feeShareBP_ <= BP, "Pool: too large");
        feeShareBP = feeShareBP_;
    }

    function adjustTotalLpAmount() external onlyOwner {
        if (d > totalSupply()) {
            _depositLp(owner(), d - totalSupply());
        }
    }

    /**
     * @dev Sets the threshold over which the pool can't be disbalanced.
     */
    function setBalanceRatioMinBP(uint balanceRatioMinBP_) external onlyOwner {
        require(balanceRatioMinBP_ <= BP, "Pool: too large");
        balanceRatioMinBP = balanceRatioMinBP_;
    }

    /**
     * @dev Switches off the possibility to make deposits.
     */
    function stopDeposit() external onlyStopAuthority {
        canDeposit = 0;
    }

    /**
     * @dev Switches on the possibility to make deposits.
     */
    function startDeposit() external onlyOwner {
        canDeposit = 1;
    }

    /**
     * @dev Switches off the possibility to make withdrawals.
     */
    function stopWithdraw() external onlyStopAuthority {
        canWithdraw = 0;
    }

    /**
     * @dev Switches on the possibility to make withdrawals.
     */
    function startWithdraw() external onlyOwner {
        canWithdraw = 1;
    }

    /**
     * @dev Sets the address of the stopAuthority account.
     */
    function setStopAuthority(address stopAuthority_) external onlyOwner {
        stopAuthority = stopAuthority_;
    }

    /**
     * @dev Sets the address of the Router contract.
     */
    function setRouter(address router_) external onlyOwner {
        router = router_;
    }

    /**
     * @dev y = (sqrt(x(4AD³ + x (4A(D - x) - D )²)) + x (4A(D - x) - D ))/8Ax.
     */
    function getY(uint x) external view returns (uint) {
        uint d_ = d; // Gas optimization
        uint a4 = a << 2;
        uint a8 = a4 << 1;
        // 4A(D - x) - D
        int part1 = int(a4) * (int(d_) - int(x)) - int(d_);
        // x * (4AD³ + x(part1²))
        uint part2 = x * (a4 * d_ * d_ * d_ + x * uint(part1 * part1));
        // (sqrt(part2) + x(part1)) / 8Ax)
        return SafeCast.toUint256(int(_sqrt(part2)) + int(x) * part1) / (a8 * x) + 1; // +1 to offset rounding errors
    }

    /**
     * @dev price = (1/2) * ((D³ + 8ADx² - 8Ax³ - 2Dx²) / (4x * sqrt(x(4AD³ + x (4A(D - x) - D )²))))
     */
    function getPrice() external view returns (uint) {
        uint x = tokenBalance;
        uint a8 = a << 3;
        uint dCubed = d * d * d;

        // 4A(D - x) - D
        int p1 = int(a << 2) * (int(d) - int(x)) - int(d);
        // x * 4AD³ + x(p1²)
        uint p2 = x * ((a << 2) * dCubed + x * uint(p1 * p1));
        // D³ + 8ADx² - 8Ax³ - 2Dx²
        int p3 = int(dCubed) + int((a << 3) * d * x * x) - int(a8 * x * x * x) - int((d << 1) * x * x);
        // 1/2 * p3 / (4x * sqrt(p2))
        return SafeCast.toUint256((PP >> 1) + ((PP * p3) / int((x << 2) * _sqrt(p2))));
    }

    function _updateD() internal {
        uint x = tokenBalance;
        uint y = vUsdBalance;
        // a = 8 * Axy(x+y)
        // b = 4 * xy(4A - 1) / 3
        // c = sqrt(a² + b³)
        // D = cbrt(a + c) + cbrt(a - c)
        uint xy = x * y;
        uint a_ = a;
        // Axy(x+y)
        uint p1 = a_ * xy * (x + y);
        // xy(4A - 1) / 3
        uint p2 = (xy * ((a_ << 2) - 1)) / 3;
        // p1² + p2³
        uint p3 = _sqrt((p1 * p1) + (p2 * p2 * p2));
        unchecked {
            uint d_ = _cbrt(p1 + p3);
            if (p3 > p1) {
                d_ -= _cbrt(p3 - p1);
            } else {
                d_ += _cbrt(p1 - p3);
            }
            d = (d_ << 1);
        }
    }

    function _toSystemPrecision(uint amount) internal view returns (uint) {
        if (tokenAmountReduce > 0) {
            return amount / tokenAmountReduce;
        } else if (tokenAmountIncrease > 0) {
            return amount * tokenAmountIncrease;
        }
        return amount;
    }

    function _fromSystemPrecision(uint amount) internal view returns (uint) {
        if (tokenAmountReduce > 0) {
            return amount * tokenAmountReduce;
        } else if (tokenAmountIncrease > 0) {
            return amount / tokenAmountIncrease;
        }
        return amount;
    }

    function _sqrt(uint n) internal pure returns (uint) {
        unchecked {
            if (n > 0) {
                uint x = (n >> 1) + 1;
                uint y = (x + n / x) >> 1;
                while (x > y) {
                    x = y;
                    y = (x + n / x) >> 1;
                }
                return x;
            }
            return 0;
        }
    }

    function _cbrt(uint n) internal pure returns (uint) {
        unchecked {
            uint x = 0;
            for (uint y = 1 << 255; y > 0; y >>= 3) {
                x <<= 1;
                uint z = 3 * x * (x + 1) + 1;
                if (n / y >= z) {
                    n -= y * z;
                    x += 1;
                }
            }
            return x;
        }
    }

    fallback() external payable {
        revert("Unsupported");
    }

    receive() external payable {
        revert("Unsupported");
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;

import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";

contract RewardManager is Ownable, ERC20 {
    using SafeERC20 for ERC20;
    uint private constant P = 52;
    uint internal constant BP = 1e4;

    // Accumulated rewards per share, shifted left by P bits
    uint public accRewardPerShareP;

    // Reward token
    ERC20 public immutable token;
    // Info of each user reward debt
    mapping(address user => uint amount) public userRewardDebt;

    // Admin fee share (in basis points)
    uint public adminFeeShareBP;
    // Unclaimed admin fee amount
    uint public adminFeeAmount;

    event Deposit(address indexed user, uint amount);
    event Withdraw(address indexed user, uint amount);
    event RewardsClaimed(address indexed user, uint amount);

    constructor(ERC20 token_, string memory lpName, string memory lpSymbol) ERC20(lpName, lpSymbol) {
        token = token_;
        // Default admin fee is 20%
        adminFeeShareBP = BP / 5;
    }

    /**
     * @notice Claims pending rewards for the current staker without updating the stake balance.
     */
    function claimRewards() external {
        uint userLpAmount = balanceOf(msg.sender);
        if (userLpAmount > 0) {
            uint rewards = (userLpAmount * accRewardPerShareP) >> P;
            uint pending = rewards - userRewardDebt[msg.sender];
            if (pending > 0) {
                userRewardDebt[msg.sender] = rewards;
                token.safeTransfer(msg.sender, pending);
                emit RewardsClaimed(msg.sender, pending);
            }
        }
    }

    /**
     * @notice Sets the basis points of the admin fee share from rewards.
     */
    function setAdminFeeShare(uint adminFeeShareBP_) external onlyOwner {
        require(adminFeeShareBP_ <= BP, "RewardManager: too high");
        adminFeeShareBP = adminFeeShareBP_;
    }

    /**
     * @notice Allows the admin to claim the collected admin fee.
     */
    function claimAdminFee() external onlyOwner {
        if (adminFeeAmount > 0) {
            token.safeTransfer(msg.sender, adminFeeAmount);
            adminFeeAmount = 0;
        }
    }

    /**
     * @notice Returns pending rewards for the staker.
     * @param user The address of the staker.
     */
    function pendingReward(address user) external view returns (uint) {
        return ((balanceOf(user) * accRewardPerShareP) >> P) - userRewardDebt[user];
    }

    /**
     * @dev Returns the number of decimals used to get user representation of LP tokens.
     */
    function decimals() public pure override returns (uint8) {
        return 3;
    }

    /**
     * @dev Adds reward to the pool, splits admin fee share and updates the accumulated rewards per share.
     */
    function _addRewards(uint rewardAmount) internal {
        if (totalSupply() > 0) {
            uint adminFeeRewards = (rewardAmount * adminFeeShareBP) / BP;
            unchecked {
                rewardAmount -= adminFeeRewards;
            }
            accRewardPerShareP += (rewardAmount << P) / totalSupply();
            adminFeeAmount += adminFeeRewards;
        }
    }

    /**
     * @dev Deposits LP amount for the user, updates user reward debt and pays pending rewards.
     */
    function _depositLp(address to, uint lpAmount) internal {
        uint pending;
        uint userLpAmount = balanceOf(to); // Gas optimization
        if (userLpAmount > 0) {
            pending = ((userLpAmount * accRewardPerShareP) >> P) - userRewardDebt[to];
        }
        userLpAmount += lpAmount;
        _mint(to, lpAmount);
        userRewardDebt[to] = (userLpAmount * accRewardPerShareP) >> P;
        if (pending > 0) {
            token.safeTransfer(to, pending);
            emit RewardsClaimed(to, pending);
        }
        emit Deposit(to, lpAmount);
    }

    /**
     * @dev Withdraws LP amount for the user, updates user reward debt and pays out pending rewards.
     */
    function _withdrawLp(address from, uint lpAmount) internal {
        uint userLpAmount = balanceOf(from); // Gas optimization
        require(userLpAmount >= lpAmount, "RewardManager: not enough amount");
        uint pending;
        if (userLpAmount > 0) {
            pending = ((userLpAmount * accRewardPerShareP) >> P) - userRewardDebt[from];
        }
        userLpAmount -= lpAmount;
        _burn(from, lpAmount);
        userRewardDebt[from] = (userLpAmount * accRewardPerShareP) >> P;
        if (pending > 0) {
            token.safeTransfer(from, pending);
            emit RewardsClaimed(from, pending);
        }
        emit Withdraw(from, lpAmount);
    }

    function _transfer(address, address, uint) internal pure override {
        revert("Unsupported");
    }

    function _approve(address, address, uint) internal pure override {
        revert("Unsupported");
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;

import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {IRouter} from "./interfaces/IRouter.sol";
import {MessengerProtocol} from "./interfaces/IBridge.sol";
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import {Pool} from "./Pool.sol";

abstract contract Router is Ownable, IRouter {
    using SafeERC20 for ERC20;
    uint private immutable chainPrecision;
    uint internal constant ORACLE_PRECISION = 18;

    mapping(bytes32 tokenId => Pool) public pools;
    // precomputed values to divide by to change the precision from the Gas Oracle precision to the token precision
    mapping(address tokenAddress => uint scalingFactor) internal fromGasOracleScalingFactor;
    // precomputed values of the scaling factor required for paying the bridging fee with stable tokens
    mapping(address tokenAddress => uint scalingFactor) internal bridgingFeeConversionScalingFactor;

    // can restrict swap operations
    address private stopAuthority;

    /**
     * @dev The rebalancer is an account responsible for balancing the liquidity pools. It ensures that the pool is
     * balanced by executing zero-fee swaps when the pool is imbalanced.
     *
     * Gas optimization: both the 'rebalancer' and 'canSwap' fields are used in the 'swap' and 'swapAndBridge'
     * functions and can occupy the same slot.
     */
    address private rebalancer;
    uint8 public override canSwap = 1;

    /**
     * @dev Emitted during the on-chain swap of tokens.
     */
    event Swapped(
        address sender,
        address recipient,
        bytes32 sendToken,
        bytes32 receiveToken,
        uint sendAmount,
        uint receiveAmount
    );

    constructor(uint chainPrecision_) {
        chainPrecision = chainPrecision_;
        stopAuthority = owner();
    }

    /**
     * @dev Modifier to make a function callable only when the swap is allowed.
     */
    modifier whenCanSwap() {
        require(canSwap == 1, "Router: swap prohibited");
        _;
    }

    /**
     * @dev Throws if called by any account other than the stopAuthority.
     */
    modifier onlyStopAuthority() {
        require(stopAuthority == msg.sender, "Router: is not stopAuthority");
        _;
    }

    /**
     * @notice Swaps a given pair of tokens on the same blockchain.
     * @param amount The amount of tokens to be swapped.
     * @param token The token to be swapped.
     * @param receiveToken The token to receive in exchange for the swapped token.
     * @param recipient The address to receive the tokens.
     * @param receiveAmountMin The minimum amount of tokens required to receive during the swap.
     */
    function swap(
        uint amount,
        bytes32 token,
        bytes32 receiveToken,
        address recipient,
        uint receiveAmountMin
    ) external override whenCanSwap {
        uint vUsdAmount = _sendAndSwapToVUsd(token, msg.sender, amount);
        uint receivedAmount = _receiveAndSwapFromVUsd(receiveToken, recipient, vUsdAmount, receiveAmountMin);
        emit Swapped(msg.sender, recipient, token, receiveToken, amount, receivedAmount);
    }

    /**
     * @notice Allows the admin to add new supported liquidity pools.
     * @dev Adds the address of the `Pool` contract to the list of supported liquidity pools.
     * @param pool The address of the `Pool` contract.
     * @param token The address of the token in the liquidity pool.
     */
    function addPool(Pool pool, bytes32 token) external onlyOwner {
        pools[token] = pool;
        address tokenAddress = address(uint160(uint(token)));
        uint tokenDecimals = ERC20(tokenAddress).decimals();
        bridgingFeeConversionScalingFactor[tokenAddress] = 10 ** (ORACLE_PRECISION - tokenDecimals + chainPrecision);
        fromGasOracleScalingFactor[tokenAddress] = 10 ** (ORACLE_PRECISION - tokenDecimals);
    }

    /**
     * @dev Switches off the possibility to make swaps.
     */
    function stopSwap() external onlyStopAuthority {
        canSwap = 0;
    }

    /**
     * @dev Switches on the possibility to make swaps.
     */
    function startSwap() external onlyOwner {
        canSwap = 1;
    }

    /**
     * @dev Allows the admin to set the address of the stopAuthority.
     */
    function setStopAuthority(address stopAuthority_) external onlyOwner {
        stopAuthority = stopAuthority_;
    }

    /**
     * @dev Allows the admin to set the address of the rebalancer.
     */
    function setRebalancer(address rebalancer_) external onlyOwner {
        rebalancer = rebalancer_;
    }

    function _receiveAndSwapFromVUsd(
        bytes32 token,
        address recipient,
        uint vUsdAmount,
        uint receiveAmountMin
    ) internal returns (uint) {
        Pool tokenPool = pools[token];
        require(address(tokenPool) != address(0), "Router: no receive pool");
        return tokenPool.swapFromVUsd(recipient, vUsdAmount, receiveAmountMin, recipient == rebalancer);
    }

    function _sendAndSwapToVUsd(bytes32 token, address user, uint amount) internal virtual returns (uint) {
        Pool pool = pools[token];
        require(address(pool) != address(0), "Router: no pool");
        ERC20(address(uint160(uint(token)))).safeTransferFrom(user, address(pool), amount);
        return pool.swapToVUsd(user, amount, user == rebalancer);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.18;

import {IBridge, MessengerProtocol} from "../interfaces/IBridge.sol";
import {Router} from "../Router.sol";

contract TestBridgeForSwap is IBridge, Router {
    uint public chainId;
    mapping(bytes32 messageHash => uint isProcessed) public override processedMessages;
    mapping(bytes32 messageHash => uint isSent) public override sentMessages;
    // Info about bridges on other chains
    mapping(uint chainId => bytes32 bridgeAddress) public override otherBridges;
    // Info about tokens on other chains
    mapping(uint chainId => mapping(bytes32 tokenAddress => bool isSupported)) public override otherBridgeTokens;

    event vUsdSent(uint amount);

    constructor() Router(18) {}

    function swapAndBridge(
        bytes32 token,
        uint amount,
        bytes32 recipient,
        uint destinationChainId,
        bytes32 receiveToken,
        uint nonce,
        MessengerProtocol messenger,
        uint feeTokenAmount
    ) external payable override {}

    function receiveTokens(
        uint amount,
        bytes32,
        uint,
        bytes32 receiveToken,
        uint,
        MessengerProtocol,
        uint receiveAmountMin
    ) external payable override {}

    function withdrawGasTokens(uint amount) external override onlyOwner {}

    function registerBridge(uint chainId_, bytes32 bridgeAddress_) external override onlyOwner {}

    function addBridgeToken(uint chainId_, bytes32 tokenAddress_) external override onlyOwner {}

    function removeBridgeToken(uint chainId_, bytes32 tokenAddress_) external override onlyOwner {}

    function getBridgingCostInTokens(uint, MessengerProtocol, address) external pure override returns (uint) {
        return 0;
    }

    function hashMessage(
        uint,
        bytes32,
        uint,
        uint,
        bytes32,
        uint,
        MessengerProtocol
    ) external pure override returns (bytes32) {
        return 0;
    }

    function _sendAndSwapToVUsd(bytes32 token, address user, uint amount) internal override returns (uint) {
        uint vUsdAmount = super._sendAndSwapToVUsd(token, user, amount);
        emit vUsdSent(vUsdAmount);
        return vUsdAmount;
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 1000
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"uint256","name":"chainId_","type":"uint256"},{"internalType":"uint256","name":"chainPrecision_","type":"uint256"},{"internalType":"address","name":"tokenAddress","type":"address"},{"internalType":"address","name":"cctpMessenger_","type":"address"},{"internalType":"address","name":"cctpTransmitter_","type":"address"},{"internalType":"contract IGasOracle","name":"gasOracle_","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"recipient","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"ReceivedExtraGas","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"sender","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"ReceivedGas","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"address","name":"sender","type":"address"},{"indexed":false,"internalType":"bytes32","name":"recipient","type":"bytes32"},{"indexed":false,"internalType":"uint256","name":"destinationChainId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"nonce","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"receivedRelayerFeeFromGas","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"receivedRelayerFeeFromTokens","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"relayerFee","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"receivedRelayerFeeTokenAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"adminFeeTokenAmount","type":"uint256"}],"name":"TokensSent","type":"event"},{"stateMutability":"payable","type":"fallback"},{"inputs":[],"name":"adminFeeShareBP","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"bytes32","name":"recipient","type":"bytes32"},{"internalType":"uint256","name":"destinationChainId","type":"uint256"},{"internalType":"uint256","name":"relayerFeeTokenAmount","type":"uint256"}],"name":"bridge","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"chainId","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"chainId","type":"uint256"}],"name":"gasUsage","outputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"destinationChainId","type":"uint256"}],"name":"getBridgingCostInTokens","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"chainId_","type":"uint256"}],"name":"getDomainByChainId","outputs":[{"internalType":"uint32","name":"","type":"uint32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"chainId","type":"uint256"}],"name":"getTransactionCost","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"sourceChainId","type":"uint256"},{"internalType":"uint64","name":"nonce","type":"uint64"}],"name":"isMessageProcessed","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"bytes","name":"message","type":"bytes"},{"internalType":"bytes","name":"signature","type":"bytes"}],"name":"receiveTokens","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"uint256","name":"chainId_","type":"uint256"},{"internalType":"uint32","name":"domain","type":"uint32"}],"name":"registerBridgeDestination","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"adminFeeShareBP_","type":"uint256"}],"name":"setAdminFeeShare","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IGasOracle","name":"gasOracle_","type":"address"}],"name":"setGasOracle","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"chainId","type":"uint256"},{"internalType":"uint256","name":"gasAmount","type":"uint256"}],"name":"setGasUsage","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"chainId_","type":"uint256"}],"name":"unregisterBridgeDestination","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"withdrawFeeInTokens","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"withdrawGas","outputs":[],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

00000000000000000000000000000000000000000000000000000000000000010000000000000000000000000000000000000000000000000000000000000012000000000000000000000000a0b86991c6218b36c1d19d4a2e9eb0ce3606eb48000000000000000000000000bd3fa81b58ba92a82136038b25adec7066af31550000000000000000000000000a992d191deec32afe36203ad87d7d289a738f810000000000000000000000000bdf6139f2841a7856ca154d851182c52f5b96e0

-----Decoded View---------------
Arg [0] : chainId_ (uint256): 1
Arg [1] : chainPrecision_ (uint256): 18
Arg [2] : tokenAddress (address): 0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48
Arg [3] : cctpMessenger_ (address): 0xBd3fa81B58Ba92a82136038B25aDec7066af3155
Arg [4] : cctpTransmitter_ (address): 0x0a992d191DEeC32aFe36203Ad87D7d289a738F81
Arg [5] : gasOracle_ (address): 0x0BdF6139F2841A7856Ca154D851182C52F5b96e0

-----Encoded View---------------
6 Constructor Arguments found :
Arg [0] : 0000000000000000000000000000000000000000000000000000000000000001
Arg [1] : 0000000000000000000000000000000000000000000000000000000000000012
Arg [2] : 000000000000000000000000a0b86991c6218b36c1d19d4a2e9eb0ce3606eb48
Arg [3] : 000000000000000000000000bd3fa81b58ba92a82136038b25adec7066af3155
Arg [4] : 0000000000000000000000000a992d191deec32afe36203ad87d7d289a738f81
Arg [5] : 0000000000000000000000000bdf6139f2841a7856ca154d851182c52f5b96e0

555:8716:10:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;9228:34;;;9240:10;188:74:22;;9252:9:10;293:2:22;278:18;;271:34;9228::10;;161:18:22;9228:34:10;;;;;;;555:8716;;9152:21;;-1:-1:-1;;;9152:21:10;;518:2:22;9152:21:10;;;500::22;557:2;537:18;;;530:30;596:13;576:18;;;569:41;627:18;;9152:21:10;;;;;;;;6517:118;;;;;;;;;;-1:-1:-1;6517:118:10;;;;;:::i;:::-;;:::i;:::-;;1369:201:11;;;;;;;;;;-1:-1:-1;1369:201:11;;;;;:::i;:::-;;:::i;:::-;;;987:25:22;;;975:2;960:18;1369:201:11;;;;;;;;5496:473:10;;;;;;:::i;:::-;;:::i;7276:178::-;;;;;;;;;;-1:-1:-1;7276:178:10;;;;;:::i;:::-;;:::i;6195:140::-;;;;;;;;;;-1:-1:-1;6195:140:10;;;;;:::i;:::-;;:::i;386:52:11:-;;;;;;;;;;-1:-1:-1;386:52:11;;;;;:::i;:::-;;;;;;;;;;;;;;798:27:10;;;;;;;;;;;;;;;;7990:209;;;;;;;;;;-1:-1:-1;7990:209:10;;;;;:::i;:::-;;:::i;:::-;;;3357:14:22;;3350:22;3332:41;;3320:2;3305:18;7990:209:10;3192:187:22;721:116:11;;;;;;;;;;-1:-1:-1;721:116:11;;;;;:::i;:::-;;:::i;1831:101:0:-;;;;;;;;;;;;;:::i;3724:1398:10:-;;;;;;:::i;:::-;;:::i;1201:85:0:-;;;;;;;;;;-1:-1:-1;1247:7:0;1273:6;1201:85;;-1:-1:-1;;;;;1273:6:0;;;4173:74:22;;4161:2;4146:18;1201:85:0;4027:226:22;6742:106:10;;;;;;;;;;-1:-1:-1;6742:106:10;;;;;:::i;:::-;;:::i;7734:250::-;;;;;;;;;;-1:-1:-1;7734:250:10;;;;;:::i;:::-;;:::i;722:29::-;;;;;;;;;;;;;;;974:103:11;;;;;;;;;;-1:-1:-1;974:103:11;;;;;:::i;:::-;;:::i;8205:237:10:-;;;;;;;;;;-1:-1:-1;8205:237:10;;;;;:::i;:::-;;:::i;:::-;;;4703:10:22;4691:23;;;4673:42;;4661:2;4646:18;8205:237:10;4529:192:22;2081:198:0;;;;;;;;;;-1:-1:-1;2081:198:0;;;;;:::i;:::-;;:::i;6965:211:10:-;;;;;;;;;;;;;:::i;6517:118::-;1094:13:0;:11;:13::i;:::-;6627:1:10::1;6598:26:::0;;;:16:::1;:26;::::0;;;;:30;6517:118::o;1369:201:11:-;1481:9;;1434:4;1535:17;;;:8;:17;;;;;;;1481:72;;;;;;;;5152:25:22;;;5193:18;;;5186:34;;;;1434:4:11;;-1:-1:-1;;;;;1481:9:11;;:44;;5125:18:22;;1481:72:11;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;1474:79;1369:201;-1:-1:-1;;1369:201:11:o;5496:473:10:-;5623:50;;;;;-1:-1:-1;;;;;5623:15:10;:30;;;;:50;;5654:7;;;;5663:9;;;;5623:50;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;5615:91;;;;-1:-1:-1;;;5615:91:10;;6611:2:22;5615:91:10;;;6593:21:22;6650:2;6630:18;;;6623:30;6689;6669:18;;;6662:58;6737:18;;5615:91:10;6409:352:22;5615:91:10;5763:9;:13;5759:204;;5793:9;5816;-1:-1:-1;;;;;5808:23:10;5839:9;5808:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;5792:61;;;5871:4;5867:86;;;5900:38;;;-1:-1:-1;;;;;206:55:22;;188:74;;5928:9:10;293:2:22;278:18;;271:34;5900:38:10;;161:18:22;5900:38:10;;;;;;;5867:86;5778:185;5759:204;5496:473;;;;;:::o;7276:178::-;1094:13:0;:11;:13::i;:::-;712:3:10::1;7362:16;:22;;7354:49;;;::::0;-1:-1:-1;;;7354:49:10;;7178:2:22;7354:49:10::1;::::0;::::1;7160:21:22::0;7217:2;7197:18;;;7190:30;7256:16;7236:18;;;7229:44;7290:18;;7354:49:10::1;6976:338:22::0;7354:49:10::1;7413:15;:34:::0;7276:178::o;6195:140::-;1094:13:0;:11;:13::i;:::-;6318:10:10::1;:6:::0;6327:1:::1;6318:10;:::i;:::-;6289:26;::::0;;;:16:::1;:26;::::0;;;;;:39:::1;::::0;;::::1;::::0;;;-1:-1:-1;6195:140:10:o;7990:209::-;8075:4;8098:15;-1:-1:-1;;;;;8098:26:10;;8125:61;8145:33;8164:13;8145:18;:33::i;:::-;9063:37;;;12554:3:22;12550:16;;;;12568:66;12546:89;9063:37:10;;;;12534:102:22;;;;12673:3;12669:16;;;12687:66;12665:89;12652:11;;;12645:110;9063:37:10;;;;;;;;;12771:12:22;;;;9063:37:10;;;9053:48;;;;;;8940:168;8125:61;8098:89;;;;;;;;;;;;;987:25:22;;975:2;960:18;;841:177;8098:89:10;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;:94;;;7990:209;-1:-1:-1;;;7990:209:10:o;721:116:11:-;1094:13:0;:11;:13::i;:::-;801:17:11::1;::::0;;;:8:::1;:17;::::0;;;;;:29;721:116::o;1831:101:0:-;1094:13;:11;:13::i;:::-;1895:30:::1;1922:1;1895:18;:30::i;:::-;1831:101::o:0;3724:1398:10:-;3907:21;3898:6;:30;3890:70;;;;-1:-1:-1;;;3890:70:10;;8069:2:22;3890:70:10;;;8051:21:22;8108:2;8088:18;;;8081:30;8147:29;8127:18;;;8120:57;8194:18;;3890:70:10;7867:351:22;3890:70:10;3991:1;3978:14;;;3970:58;;;;-1:-1:-1;;;3970:58:10;;8425:2:22;3970:58:10;;;8407:21:22;8464:2;8444:18;;;8437:30;8503:33;8483:18;;;8476:61;8554:18;;3970:58:10;8223:355:22;3970:58:10;4038:57;-1:-1:-1;;;;;4038:5:10;:22;4061:10;4081:4;4088:6;4038:22;:57::i;:::-;4105:19;4127:49;4154:21;4127:26;:49::i;:::-;4204:43;;;;;;;;987:25:22;;;4105:71:10;;-1:-1:-1;4186:15:10;;4204:4;;:23;;960:18:22;;4204:43:10;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;4186:61;-1:-1:-1;4186:61:10;4265:26;4277:14;4265:9;:26;:::i;:::-;:40;;4257:73;;;;-1:-1:-1;;;4257:73:10;;8915:2:22;4257:73:10;;;8897:21:22;8954:2;8934:18;;;8927:30;8993:22;8973:18;;;8966:50;9033:18;;4257:73:10;8713:344:22;4257:73:10;4340:17;4360:30;4369:21;4360:6;:30;:::i;:::-;4340:50;;4400:13;4427:15;;4446:1;4427:20;4423:214;;712:3;4490:15;;4475:12;:30;;;;:::i;:::-;4474:37;;;;:::i;:::-;4463:48;;4529:8;4541:1;4529:13;4525:64;;-1:-1:-1;4573:1:10;4525:64;4602:24;4618:8;4602:24;;:::i;:::-;;;4423:214;4646:24;4673:38;4692:18;4673;:38::i;:::-;4736:88;;;;;;;;9876:25:22;;;4736:88:10;9937:23:22;;9917:18;;;9910:51;9977:18;;;9970:34;;;-1:-1:-1;;;;;4817:5:10;10040:55:22;;10020:18;;;10013:83;9937:23;;-1:-1:-1;;;4736:13:10;:28;;;;9848:19:22;;4736:88:10;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;4839:276;;;10759:25:22;;;4889:10:10;10815:2:22;10800:18;;10793:83;10892:18;;;10885:34;;;10950:2;10935:18;;10928:34;;;11011:18;10999:31;;10993:3;10978:19;;10971:60;4987:9:10;11062:3:22;11047:19;;11040:35;11106:3;11091:19;;11084:35;;;11150:3;11135:19;;11128:35;;;11194:3;11179:19;;11172:35;;;11238:3;11223:19;;11216:35;;;4721:103:10;;-1:-1:-1;4839:276:10;;10746:3:22;10731:19;4839:276:10;;;;;;;3880:1242;;;;;;3724:1398;;;;:::o;6742:106::-;1094:13:0;:11;:13::i;:::-;6805:36:10::1;::::0;6813:10:::1;::::0;6805:36;::::1;;;::::0;6834:6;;6805:36:::1;::::0;;;6834:6;6813:10;6805:36;::::1;;;;;;;;;;;;;::::0;::::1;;;;;;6742:106:::0;:::o;7734:250::-;7850:9;;7815:4;7907:28;;;:8;:28;;;;;;;7850:86;;;;;7815:4;;7951:26;;-1:-1:-1;;;;;7850:9:10;;;;:36;;:86;;7887:18;;7850:86;;5152:25:22;;;5208:2;5193:18;;5186:34;5140:2;5125:18;;4978:248;7850:86:10;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;:127;;;;:::i;974:103:11:-;1094:13:0;:11;:13::i;:::-;1048:9:11::1;:22:::0;;-1:-1:-1;;1048:22:11::1;-1:-1:-1::0;;;;;1048:22:11;;;::::1;::::0;;;::::1;::::0;;974:103::o;8205:237:10:-;8269:6;8307:26;;;:16;:26;;;;;;8351:16;8343:51;;;;-1:-1:-1;;;8343:51:10;;11464:2:22;8343:51:10;;;11446:21:22;11503:2;11483:18;;;11476:30;11542:24;11522:18;;;11515:52;11584:18;;8343:51:10;11262:346:22;8343:51:10;8418:16;8433:1;8418:12;:16;:::i;:::-;8404:31;8205:237;-1:-1:-1;;;8205:237:10:o;2081:198:0:-;1094:13;:11;:13::i;:::-;-1:-1:-1;;;;;2169:22:0;::::1;2161:73;;;::::0;-1:-1:-1;;;2161:73:0;;11815:2:22;2161:73:0::1;::::0;::::1;11797:21:22::0;11854:2;11834:18;;;11827:30;11893:34;11873:18;;;11866:62;11964:8;11944:18;;;11937:36;11990:19;;2161:73:0::1;11613:402:22::0;2161:73:0::1;2244:28;2263:8;2244:18;:28::i;:::-;2081:198:::0;:::o;6965:211:10:-;1094:13:0;:11;:13::i;:::-;7043:30:10::1;::::0;;;;7067:4:::1;7043:30;::::0;::::1;4173:74:22::0;7025:15:10::1;::::0;7043:5:::1;-1:-1:-1::0;;;;;7043:15:10::1;::::0;::::1;::::0;4146:18:22;;7043:30:10::1;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;7025:48:::0;-1:-1:-1;7087:14:10;;7083:87:::1;;7117:42;-1:-1:-1::0;;;;;7117:5:10::1;:18;7136:10;7148::::0;7117:18:::1;:42::i;1359:130:0:-:0;1247:7;1273:6;-1:-1:-1;;;;;1273:6:0;719:10:7;1422:23:0;1414:68;;;;-1:-1:-1;;;1414:68:0;;12222:2:22;1414:68:0;;;12204:21:22;;;12241:18;;;12234:30;12300:34;12280:18;;;12273:62;12352:18;;1414:68:0;12020:356:22;2433:187:0;2506:16;2525:6;;-1:-1:-1;;;;;2541:17:0;;;-1:-1:-1;;2541:17:0;;;;;;2573:40;;2525:6;;;;;;;2573:40;;2506:16;2573:40;2496:124;2433:187;:::o;974:241:5:-;1139:68;;-1:-1:-1;;;;;13075:15:22;;;1139:68:5;;;13057:34:22;13127:15;;13107:18;;;13100:43;13159:18;;;13152:34;;;1112:96:5;;1132:5;;1162:27;;12969:18:22;;1139:68:5;;;;-1:-1:-1;;1139:68:5;;;;;;;;;;;;;;;;;;;;;;;;;;;1112:19;:96::i;:::-;974:241;;;;:::o;8695:239:10:-;8778:4;8798:17;8819:1;8798:22;8794:36;;-1:-1:-1;8829:1:10;;8695:239;-1:-1:-1;8695:239:10:o;8794:36::-;8903:9;;:24;;;;;8919:7;8903:24;;;987:25:22;-1:-1:-1;;;;;8903:9:10;;;;:15;;960:18:22;;8903:24:10;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;8848:51;8882:17;8848:31;:51;:::i;763:205:5:-;902:58;;-1:-1:-1;;;;;206:55:22;;902:58:5;;;188:74:22;278:18;;;271:34;;;875:86:5;;895:5;;925:23;;161:18:22;;902:58:5;14:297:22;875:86:5;763:205;;;:::o;3747:706::-;4166:23;4192:69;4220:4;4192:69;;;;;;;;;;;;;;;;;4200:5;-1:-1:-1;;;;;4192:27:5;;;:69;;;;;:::i;:::-;4275:17;;4166:95;;-1:-1:-1;4275:21:5;4271:176;;4370:10;4359:30;;;;;;;;;;;;:::i;:::-;4351:85;;;;-1:-1:-1;;;4351:85:5;;13399:2:22;4351:85:5;;;13381:21:22;13438:2;13418:18;;;13411:30;13477:34;13457:18;;;13450:62;13548:12;13528:18;;;13521:40;13578:19;;4351:85:5;13197:406:22;3873:223:6;4006:12;4037:52;4059:6;4067:4;4073:1;4076:12;4037:21;:52::i;:::-;4030:59;3873:223;-1:-1:-1;;;;3873:223:6:o;4960:446::-;5125:12;5182:5;5157:21;:30;;5149:81;;;;-1:-1:-1;;;5149:81:6;;13810:2:22;5149:81:6;;;13792:21:22;13849:2;13829:18;;;13822:30;13888:34;13868:18;;;13861:62;13959:8;13939:18;;;13932:36;13985:19;;5149:81:6;13608:402:22;5149:81:6;5241:12;5255:23;5282:6;-1:-1:-1;;;;;5282:11:6;5301:5;5308:4;5282:31;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;5240:73;;;;5330:69;5357:6;5365:7;5374:10;5386:12;5330:26;:69::i;:::-;5323:76;4960:446;-1:-1:-1;;;;;;;4960:446:6:o;7466:628::-;7646:12;7674:7;7670:418;;;7701:10;:17;7722:1;7701:22;7697:286;;-1:-1:-1;;;;;1465:19:6;;;7908:60;;;;-1:-1:-1;;;7908:60:6;;14764:2:22;7908:60:6;;;14746:21:22;14803:2;14783:18;;;14776:30;14842:31;14822:18;;;14815:59;14891:18;;7908:60:6;14562:353:22;7908:60:6;-1:-1:-1;8003:10:6;7996:17;;7670:418;8044:33;8052:10;8064:12;8775:17;;:21;8771:379;;9003:10;8997:17;9059:15;9046:10;9042:2;9038:19;9031:44;8771:379;9126:12;9119:20;;-1:-1:-1;;;9119:20:6;;;;;;;;:::i;656:180:22:-;715:6;768:2;756:9;747:7;743:23;739:32;736:52;;;784:1;781;774:12;736:52;-1:-1:-1;807:23:22;;656:180;-1:-1:-1;656:180:22:o;1023:154::-;-1:-1:-1;;;;;1102:5:22;1098:54;1091:5;1088:65;1078:93;;1167:1;1164;1157:12;1182:347;1233:8;1243:6;1297:3;1290:4;1282:6;1278:17;1274:27;1264:55;;1315:1;1312;1305:12;1264:55;-1:-1:-1;1338:20:22;;1381:18;1370:30;;1367:50;;;1413:1;1410;1403:12;1367:50;1450:4;1442:6;1438:17;1426:29;;1502:3;1495:4;1486:6;1478;1474:19;1470:30;1467:39;1464:59;;;1519:1;1516;1509:12;1464:59;1182:347;;;;;:::o;1534:852::-;1633:6;1641;1649;1657;1665;1718:2;1706:9;1697:7;1693:23;1689:32;1686:52;;;1734:1;1731;1724:12;1686:52;1773:9;1760:23;1792:31;1817:5;1792:31;:::i;:::-;1842:5;-1:-1:-1;1898:2:22;1883:18;;1870:32;1921:18;1951:14;;;1948:34;;;1978:1;1975;1968:12;1948:34;2017:58;2067:7;2058:6;2047:9;2043:22;2017:58;:::i;:::-;2094:8;;-1:-1:-1;1991:84:22;-1:-1:-1;2182:2:22;2167:18;;2154:32;;-1:-1:-1;2198:16:22;;;2195:36;;;2227:1;2224;2217:12;2195:36;;2266:60;2318:7;2307:8;2296:9;2292:24;2266:60;:::i;:::-;1534:852;;;;-1:-1:-1;1534:852:22;;-1:-1:-1;2345:8:22;;2240:86;1534:852;-1:-1:-1;;;1534:852:22:o;2391:344::-;2458:6;2466;2519:2;2507:9;2498:7;2494:23;2490:32;2487:52;;;2535:1;2532;2525:12;2487:52;2571:9;2558:23;2548:33;;2631:2;2620:9;2616:18;2603:32;2675:10;2668:5;2664:22;2657:5;2654:33;2644:61;;2701:1;2698;2691:12;2644:61;2724:5;2714:15;;;2391:344;;;;;:::o;2740:129::-;2825:18;2818:5;2814:30;2807:5;2804:41;2794:69;;2859:1;2856;2849:12;2874:313;2941:6;2949;3002:2;2990:9;2981:7;2977:23;2973:32;2970:52;;;3018:1;3015;3008:12;2970:52;3054:9;3041:23;3031:33;;3114:2;3103:9;3099:18;3086:32;3127:30;3151:5;3127:30;:::i;3384:248::-;3452:6;3460;3513:2;3501:9;3492:7;3488:23;3484:32;3481:52;;;3529:1;3526;3519:12;3481:52;-1:-1:-1;;3552:23:22;;;3622:2;3607:18;;;3594:32;;-1:-1:-1;3384:248:22:o;3637:385::-;3723:6;3731;3739;3747;3800:3;3788:9;3779:7;3775:23;3771:33;3768:53;;;3817:1;3814;3807:12;3768:53;-1:-1:-1;;3840:23:22;;;3910:2;3895:18;;3882:32;;-1:-1:-1;3961:2:22;3946:18;;3933:32;;4012:2;3997:18;3984:32;;-1:-1:-1;3637:385:22;-1:-1:-1;3637:385:22:o;4258:266::-;4336:6;4389:2;4377:9;4368:7;4364:23;4360:32;4357:52;;;4405:1;4402;4395:12;4357:52;4444:9;4431:23;4463:31;4488:5;4463:31;:::i;5231:184::-;5301:6;5354:2;5342:9;5333:7;5329:23;5325:32;5322:52;;;5370:1;5367;5360:12;5322:52;-1:-1:-1;5393:16:22;;5231:184;-1:-1:-1;5231:184:22:o;5420:266::-;5508:6;5503:3;5496:19;5560:6;5553:5;5546:4;5541:3;5537:14;5524:43;-1:-1:-1;5612:1:22;5587:16;;;5605:4;5583:27;;;5576:38;;;;5668:2;5647:15;;;-1:-1:-1;;5643:29:22;5634:39;;;5630:50;;5420:266::o;5691:431::-;5904:2;5893:9;5886:21;5867:4;5930:61;5987:2;5976:9;5972:18;5964:6;5956;5930:61;:::i;:::-;6039:9;6031:6;6027:22;6022:2;6011:9;6007:18;6000:50;6067:49;6109:6;6101;6093;6067:49;:::i;6127:277::-;6194:6;6247:2;6235:9;6226:7;6222:23;6218:32;6215:52;;;6263:1;6260;6253:12;6215:52;6295:9;6289:16;6348:5;6341:13;6334:21;6327:5;6324:32;6314:60;;6370:1;6367;6360:12;7319:184;-1:-1:-1;;;7368:1:22;7361:88;7468:4;7465:1;7458:15;7492:4;7489:1;7482:15;7508:172;7575:10;7605;;;7617;;;7601:27;;7640:11;;;7637:37;;;7654:18;;:::i;:::-;7637:37;7508:172;;;;:::o;8583:125::-;8648:9;;;8669:10;;;8666:36;;;8682:18;;:::i;9062:128::-;9129:9;;;9150:11;;;9147:37;;;9164:18;;:::i;9195:168::-;9268:9;;;9299;;9316:15;;;9310:22;;9296:37;9286:71;;9337:18;;:::i;9368:274::-;9408:1;9434;9424:189;;-1:-1:-1;;;9466:1:22;9459:88;9570:4;9567:1;9560:15;9598:4;9595:1;9588:15;9424:189;-1:-1:-1;9627:9:22;;9368:274::o;10107:249::-;10176:6;10229:2;10217:9;10208:7;10204:23;10200:32;10197:52;;;10245:1;10242;10235:12;10197:52;10277:9;10271:16;10296:30;10320:5;10296:30;:::i;14015:250::-;14100:1;14110:113;14124:6;14121:1;14118:13;14110:113;;;14200:11;;;14194:18;14181:11;;;14174:39;14146:2;14139:10;14110:113;;;-1:-1:-1;;14257:1:22;14239:16;;14232:27;14015:250::o;14270:287::-;14399:3;14437:6;14431:13;14453:66;14512:6;14507:3;14500:4;14492:6;14488:17;14453:66;:::i;:::-;14535:16;;;;;14270:287;-1:-1:-1;;14270:287:22:o;14920:396::-;15069:2;15058:9;15051:21;15032:4;15101:6;15095:13;15144:6;15139:2;15128:9;15124:18;15117:34;15160:79;15232:6;15227:2;15216:9;15212:18;15207:2;15199:6;15195:15;15160:79;:::i;:::-;15300:2;15279:15;-1:-1:-1;;15275:29:22;15260:45;;;;15307:2;15256:54;;14920:396;-1:-1:-1;;14920:396:22:o

ipfs://a6e32dea10e0192cd871f46d80dba9c5980bfcad8a3050d764ce4da727fc3f7c