Contract

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: BUSL 1.1
pragma solidity =0.8.22;

import "openzeppelin-contracts/contracts/security/ReentrancyGuard.sol";
import "../interfaces/IExchangeConfig.sol";
import "./interfaces/IBootstrapBallot.sol";
import "./interfaces/IAirdrop.sol";
import "../SigningTools.sol";


// Allows airdrop participants to vote on whether or not to start up the exchange

contract BootstrapBallot is IBootstrapBallot, ReentrancyGuard
    {
	event BallotFinalized(bool startExchange);

    IExchangeConfig immutable public exchangeConfig;
    IAirdrop immutable public airdrop1;
    IAirdrop immutable public airdrop2;

	// Completion timestamps for Airdrop I and 2
	uint256 immutable public claimableTimestamp1;
	uint256 immutable public claimableTimestamp2;

	bool public ballotFinalized;
	bool public startExchangeApproved;

	// Ensures that voters can only vote once
//	mapping(address=>bool) public hasVoted;


	// === VOTE TALLIES ===
	// Yes/No tallies on whether or not to start the exchange and distribute SALT to the ecosystem contracts

	// The original BootstrapBallot
	IBootstrapBallot public previousDeployment = IBootstrapBallot(address(0xF1E667f40460Ec3327f1BB57d686F568D474b02c));

	// This contract is a redeployed version due to a USDT related approval error in Liquidity.sol
	uint256 public startExchangeYes = previousDeployment.startExchangeYes();
	uint256 public startExchangeNo = previousDeployment.startExchangeNo();


	constructor( IExchangeConfig _exchangeConfig, IAirdrop _airdrop1, IAirdrop _airdrop2, uint256 ballotDuration, uint256 airdrop2DelayTillDistribution )
		{
		require( ballotDuration > 0, "ballotDuration cannot be zero" );

		exchangeConfig = _exchangeConfig;
		airdrop1 = _airdrop1;
		airdrop2 = _airdrop2;

		// Airdrop I is claimable when the BootstrapBallot is completed
		claimableTimestamp1 = block.timestamp + ballotDuration;

		// Airdrop 2 is claimable a certain number of days after Airdrop 1 completes
		claimableTimestamp2 = claimableTimestamp1 + airdrop2DelayTillDistribution;
		}


	// Cast a YES or NO vote to start up the exchange, distribute SALT and establish initial geo restrictions.
	// Votes cannot be changed once they are cast.
	// Requires a valid signature to signify that the msg.sender is authorized to vote and entitled to receive the specified saltAmount (checked offchain)
	function vote( bool voteStartExchangeYes, uint256 saltAmount, bytes calldata signature ) external nonReentrant
		{
		// Not necessary in the redeployed version

//		require( ! hasVoted[msg.sender], "User already voted" );
//		require( ! ballotFinalized, "Ballot has already been finalized" );
//		require( saltAmount != 0, "saltAmount cannot be zero" );
//
//		// Verify the signature to confirm the user is authorized to vote and receive a share of Airdrop 1
//		bytes32 messageHash = keccak256(abi.encodePacked( uint256(1), block.chainid, saltAmount, msg.sender));
//		require(SigningTools._verifySignature(messageHash, signature), "Incorrect BootstrapBallot.vote signatory" );
//
//		if ( voteStartExchangeYes )
//			startExchangeYes++;
//		else
//			startExchangeNo++;
//
//		hasVoted[msg.sender] = true;
//
//		// Authorize the user to receive Airdrop 1
//		airdrop1.authorizeWallet(msg.sender, saltAmount);
		}


	// Ensures that the completionTimestamp has been reached and then calls InitialDistribution.distributionApproved if the voters have approved the ballot.
	function finalizeBallot() external nonReentrant
		{
		require( ! ballotFinalized, "Ballot has already been finalized" );
		require( block.timestamp >= claimableTimestamp1, "Ballot is not yet complete" );

		if ( startExchangeYes > startExchangeNo )
			{
			// First call performUpkeep() to reset the emissions timers so the first liquidity rewards claimers don't claim a full days worth of the bootstrap rewards
			exchangeConfig.upkeep().performUpkeep();

			exchangeConfig.initialDistribution().distributionApproved( airdrop1, airdrop2 );
			airdrop1.allowClaiming();

			exchangeConfig.dao().pools().startExchangeApproved();

			startExchangeApproved = true;
			}

		emit BallotFinalized(startExchangeApproved);

		ballotFinalized = true;
		}


	// Requires a valid signature to signify that the msg.sender is entitled to receive the specified saltAmount for Airdrop 2 (checked offchain)
	function authorizeAirdrop2( uint256 saltAmount, bytes calldata signature ) external nonReentrant
		{
		require( saltAmount != 0, "saltAmount cannot be zero" );

		// Verify the signature to confirm the user is authorized to receive Airdrop 2
		bytes32 messageHash = keccak256(abi.encodePacked(uint256(2), block.chainid, saltAmount, msg.sender));
		require(SigningTools._verifySignature(messageHash, signature), "Incorrect authorizeAirdrop2 signatory" );

		// Authorize the user to receive Airdrop 2
		airdrop2.authorizeWallet(msg.sender, saltAmount);
		}


	// Called to signify that Airdrop 2 is ready to allow claiming
	function finalizeAirdrop2() external nonReentrant
		{
		require( block.timestamp >= claimableTimestamp2, "Airdrop 2 cannot be finalized yet" );

		airdrop2.allowClaiming();
		}


	function hasVoted(address wallet) external view returns (bool)
		{
		return previousDeployment.hasVoted(wallet);
		}
	}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be _NOT_ENTERED
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == _ENTERED;
    }
}

// SPDX-License-Identifier: BUSL 1.1
pragma solidity =0.8.22;

import "openzeppelin-contracts/contracts/finance/VestingWallet.sol";
import "../staking/interfaces/ILiquidity.sol";
import "../launch/interfaces/IInitialDistribution.sol";
import "../rewards/interfaces/IRewardsEmitter.sol";
import "../rewards/interfaces/ISaltRewards.sol";
import "../rewards/interfaces/IEmissions.sol";
import "../interfaces/IAccessManager.sol";
import "../launch/interfaces/IAirdrop.sol";
import "../dao/interfaces/IDAO.sol";
import "../interfaces/ISalt.sol";
import "./IUpkeep.sol";


interface IExchangeConfig
	{
	function setContracts( IDAO _dao, IUpkeep _upkeep, IInitialDistribution _initialDistribution, VestingWallet _teamVestingWallet, VestingWallet _daoVestingWallet ) external; // onlyOwner
	function setAccessManager( IAccessManager _accessManager ) external; // onlyOwner

	// Views
	function salt() external view returns (ISalt);
	function wbtc() external view returns (IERC20);
	function weth() external view returns (IERC20);
	function usdc() external view returns (IERC20);
	function usdt() external view returns (IERC20);

	function daoVestingWallet() external view returns (VestingWallet);
    function teamVestingWallet() external view returns (VestingWallet);
    function initialDistribution() external view returns (IInitialDistribution);

	function accessManager() external view returns (IAccessManager);
	function dao() external view returns (IDAO);
	function upkeep() external view returns (IUpkeep);
	function teamWallet() external view returns (address);

	function walletHasAccess( address wallet ) external view returns (bool);
	}

// SPDX-License-Identifier: BUSL 1.1
pragma solidity =0.8.22;


interface IBootstrapBallot
	{
	function vote( bool voteStartExchangeYes, uint256 saltAmount, bytes calldata signature ) external;
	function finalizeBallot() external;

	function authorizeAirdrop2( uint256 saltAmount, bytes calldata signature ) external;
	function finalizeAirdrop2() external;

	// Views
	function claimableTimestamp1() external view returns (uint256);
	function claimableTimestamp2() external view returns (uint256);

	function hasVoted(address user) external view returns (bool);
	function ballotFinalized() external view returns (bool);

	function startExchangeYes() external view returns (uint256);
	function startExchangeNo() external view returns (uint256);
	}

// SPDX-License-Identifier: BUSL 1.1
pragma solidity =0.8.22;


interface IAirdrop
	{
	function authorizeWallet( address wallet, uint256 saltAmount ) external;
	function allowClaiming() external;
	function claim() external;

	// Views
	function claimedByUser( address wallet) external view returns (uint256);
	function claimingAllowed() external view returns (bool);
	function claimingStartTimestamp() external view returns (uint256);
	function claimableAmount(address wallet) external view returns (uint256);
    function airdropForUser( address wallet ) external view returns (uint256);
	}

pragma solidity =0.8.22;

import "openzeppelin-contracts/contracts/utils/cryptography/ECDSA.sol";


library SigningTools
	{
	// The public address of the signer for verfication of BootstrapBallot voting and default AccessManager
	address constant public EXPECTED_SIGNER = 0x1234519DCA2ef23207E1CA7fd70b96f281893bAa;


	// Verify that the messageHash was signed by the authoratative signer.
    function _verifySignature(bytes32 messageHash, bytes memory signature ) internal pure returns (bool)
    	{
		bytes32 r;
		bytes32 s;
		uint8 v;

		assembly
			{
			r := mload (add (signature, 0x20))
			s := mload (add (signature, 0x40))
			v := mload (add (signature, 0x41))
			}

		address recoveredAddress = ECDSA.recover(messageHash, v, r, s);

        return (recoveredAddress == EXPECTED_SIGNER);
    	}
	}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (finance/VestingWallet.sol)
pragma solidity ^0.8.0;

import "../token/ERC20/utils/SafeERC20.sol";
import "../utils/Address.sol";
import "../utils/Context.sol";

/**
 * @title VestingWallet
 * @dev This contract handles the vesting of Eth and ERC20 tokens for a given beneficiary. Custody of multiple tokens
 * can be given to this contract, which will release the token to the beneficiary following a given vesting schedule.
 * The vesting schedule is customizable through the {vestedAmount} function.
 *
 * Any token transferred to this contract will follow the vesting schedule as if they were locked from the beginning.
 * Consequently, if the vesting has already started, any amount of tokens sent to this contract will (at least partly)
 * be immediately releasable.
 */
contract VestingWallet is Context {
    event EtherReleased(uint256 amount);
    event ERC20Released(address indexed token, uint256 amount);

    uint256 private _released;
    mapping(address => uint256) private _erc20Released;
    address private immutable _beneficiary;
    uint64 private immutable _start;
    uint64 private immutable _duration;

    /**
     * @dev Set the beneficiary, start timestamp and vesting duration of the vesting wallet.
     */
    constructor(address beneficiaryAddress, uint64 startTimestamp, uint64 durationSeconds) payable {
        require(beneficiaryAddress != address(0), "VestingWallet: beneficiary is zero address");
        _beneficiary = beneficiaryAddress;
        _start = startTimestamp;
        _duration = durationSeconds;
    }

    /**
     * @dev The contract should be able to receive Eth.
     */
    receive() external payable virtual {}

    /**
     * @dev Getter for the beneficiary address.
     */
    function beneficiary() public view virtual returns (address) {
        return _beneficiary;
    }

    /**
     * @dev Getter for the start timestamp.
     */
    function start() public view virtual returns (uint256) {
        return _start;
    }

    /**
     * @dev Getter for the vesting duration.
     */
    function duration() public view virtual returns (uint256) {
        return _duration;
    }

    /**
     * @dev Amount of eth already released
     */
    function released() public view virtual returns (uint256) {
        return _released;
    }

    /**
     * @dev Amount of token already released
     */
    function released(address token) public view virtual returns (uint256) {
        return _erc20Released[token];
    }

    /**
     * @dev Getter for the amount of releasable eth.
     */
    function releasable() public view virtual returns (uint256) {
        return vestedAmount(uint64(block.timestamp)) - released();
    }

    /**
     * @dev Getter for the amount of releasable `token` tokens. `token` should be the address of an
     * IERC20 contract.
     */
    function releasable(address token) public view virtual returns (uint256) {
        return vestedAmount(token, uint64(block.timestamp)) - released(token);
    }

    /**
     * @dev Release the native token (ether) that have already vested.
     *
     * Emits a {EtherReleased} event.
     */
    function release() public virtual {
        uint256 amount = releasable();
        _released += amount;
        emit EtherReleased(amount);
        Address.sendValue(payable(beneficiary()), amount);
    }

    /**
     * @dev Release the tokens that have already vested.
     *
     * Emits a {ERC20Released} event.
     */
    function release(address token) public virtual {
        uint256 amount = releasable(token);
        _erc20Released[token] += amount;
        emit ERC20Released(token, amount);
        SafeERC20.safeTransfer(IERC20(token), beneficiary(), amount);
    }

    /**
     * @dev Calculates the amount of ether that has already vested. Default implementation is a linear vesting curve.
     */
    function vestedAmount(uint64 timestamp) public view virtual returns (uint256) {
        return _vestingSchedule(address(this).balance + released(), timestamp);
    }

    /**
     * @dev Calculates the amount of tokens that has already vested. Default implementation is a linear vesting curve.
     */
    function vestedAmount(address token, uint64 timestamp) public view virtual returns (uint256) {
        return _vestingSchedule(IERC20(token).balanceOf(address(this)) + released(token), timestamp);
    }

    /**
     * @dev Virtual implementation of the vesting formula. This returns the amount vested, as a function of time, for
     * an asset given its total historical allocation.
     */
    function _vestingSchedule(uint256 totalAllocation, uint64 timestamp) internal view virtual returns (uint256) {
        if (timestamp < start()) {
            return 0;
        } else if (timestamp > start() + duration()) {
            return totalAllocation;
        } else {
            return (totalAllocation * (timestamp - start())) / duration();
        }
    }
}

// SPDX-License-Identifier: BUSL 1.1
pragma solidity =0.8.22;

import "openzeppelin-contracts/contracts/token/ERC20/IERC20.sol";
import "./IStakingRewards.sol";


interface ILiquidity is IStakingRewards
	{
	function depositLiquidityAndIncreaseShare( IERC20 tokenA, IERC20 tokenB, uint256 maxAmountA, uint256 maxAmountB, uint256 minAddedAmountA, uint256 minAddedAmountB, uint256 minAddedLiquidity, uint256 deadline, bool useZapping ) external returns (uint256 addedLiquidity);
	function withdrawLiquidityAndClaim( IERC20 tokenA, IERC20 tokenB, uint256 liquidityToWithdraw, uint256 minReclaimedA, uint256 minReclaimedB, uint256 deadline ) external returns (uint256 reclaimedA, uint256 reclaimedB);
	}

// SPDX-License-Identifier: BUSL 1.1
pragma solidity =0.8.22;

import "./IBootstrapBallot.sol";
import "./IAirdrop.sol";


interface IInitialDistribution
	{
	function distributionApproved( IAirdrop airdrop1, IAirdrop airdrop2 ) external;

	// Views
	function bootstrapBallot() external view returns (IBootstrapBallot);
	}

// SPDX-License-Identifier: BUSL 1.1
pragma solidity =0.8.22;

import "../../staking/interfaces/IStakingRewards.sol";


interface IRewardsEmitter
	{
	function addSALTRewards( AddedReward[] calldata addedRewards ) external;
	function performUpkeep( uint256 timeSinceLastUpkeep ) external;

	// Views
	function pendingRewardsForPools( bytes32[] calldata pools ) external view returns (uint256[] calldata);
	}

// SPDX-License-Identifier: BUSL 1.1
pragma solidity =0.8.22;

import "./IRewardsEmitter.sol";


interface ISaltRewards
	{
	function sendInitialSaltRewards( uint256 liquidityBootstrapAmount, bytes32[] calldata poolIDs ) external;
    function performUpkeep( bytes32[] calldata poolIDs, uint256[] calldata profitsForPools ) external;

    // Views
    function stakingRewardsEmitter() external view returns (IRewardsEmitter);
    function liquidityRewardsEmitter() external view returns (IRewardsEmitter);
    }

// SPDX-License-Identifier: BUSL 1.1
pragma solidity =0.8.22;


interface IEmissions
	{
	function performUpkeep( uint256 timeSinceLastUpkeep ) external;
    }

// SPDX-License-Identifier: BUSL 1.1
pragma solidity =0.8.22;


interface IAccessManager
	{
	function excludedCountriesUpdated() external;
	function grantAccess(bytes calldata signature) external;

	// Views
	function geoVersion() external view returns (uint256);
	function walletHasAccess(address wallet) external view returns (bool);
	}

// SPDX-License-Identifier: BUSL 1.1
pragma solidity =0.8.22;

import "../../rewards/interfaces/ISaltRewards.sol";
import "../../pools/interfaces/IPools.sol";
import "../../interfaces/ISalt.sol";

interface IDAO
	{
	function finalizeBallot( uint256 ballotID ) external;
	function manuallyRemoveBallot( uint256 ballotID ) external;

	function withdrawFromDAO( IERC20 token ) external returns (uint256 withdrawnAmount);

	// Views
	function pools() external view returns (IPools);
	function websiteURL() external view returns (string memory);
	function countryIsExcluded( string calldata country ) external view returns (bool);
	}

// SPDX-License-Identifier: BUSL 1.1
pragma solidity =0.8.22;

import "openzeppelin-contracts/contracts/token/ERC20/IERC20.sol";


interface ISalt is IERC20
	{
	function burnTokensInContract() external;

	// Views
	function totalBurned() external view returns (uint256);
	}

// SPDX-License-Identifier: BUSL 1.1
pragma solidity =0.8.22;


interface IUpkeep
	{
	function performUpkeep() external;

	// Views
	function currentRewardsForCallingPerformUpkeep() external view returns (uint256);
	function lastUpkeepTimeEmissions() external view returns (uint256);
	function lastUpkeepTimeRewardsEmitters() external view returns (uint256);
	}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.0;

import "../Strings.sol";

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS,
        InvalidSignatureV // Deprecated in v4.8
    }

    function _throwError(RecoverError error) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert("ECDSA: invalid signature");
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert("ECDSA: invalid signature length");
        } else if (error == RecoverError.InvalidSignatureS) {
            revert("ECDSA: invalid signature 's' value");
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature` or error string. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength);
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, signature);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError) {
        bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
        uint8 v = uint8((uint256(vs) >> 255) + 27);
        return tryRecover(hash, v, r, s);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     *
     * _Available since v4.2._
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, r, vs);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address, RecoverError) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature);
        }

        return (signer, RecoverError.NoError);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from a `hash`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32 message) {
        // 32 is the length in bytes of hash,
        // enforced by the type signature above
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, "\x19Ethereum Signed Message:\n32")
            mstore(0x1c, hash)
            message := keccak256(0x00, 0x3c)
        }
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from `s`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
    }

    /**
     * @dev Returns an Ethereum Signed Typed Data, created from a
     * `domainSeparator` and a `structHash`. This produces hash corresponding
     * to the one signed with the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
     * JSON-RPC method as part of EIP-712.
     *
     * See {recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 data) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, "\x19\x01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            data := keccak256(ptr, 0x42)
        }
    }

    /**
     * @dev Returns an Ethereum Signed Data with intended validator, created from a
     * `validator` and `data` according to the version 0 of EIP-191.
     *
     * See {recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19\x00", validator, data));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
     * Revert on invalid signature.
     */
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return
            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: BUSL 1.1
pragma solidity =0.8.22;


struct AddedReward
	{
	bytes32 poolID;							// The pool to add rewards to
	uint256 amountToAdd;				// The amount of rewards (as SALT) to add
	}

struct UserShareInfo
	{
	uint256 userShare;					// A user's share for a given poolID
	uint256 virtualRewards;				// The amount of rewards that were added to maintain proper rewards/share ratio - and will be deducted from a user's pending rewards.
	uint256 cooldownExpiration;		// The timestamp when the user can modify their share
	}


interface IStakingRewards
	{
	function claimAllRewards( bytes32[] calldata poolIDs ) external returns (uint256 rewardsAmount);
	function addSALTRewards( AddedReward[] calldata addedRewards ) external;

	// Views
	function totalShares(bytes32 poolID) external view returns (uint256);
	function totalSharesForPools( bytes32[] calldata poolIDs ) external view returns (uint256[] calldata shares);
	function totalRewardsForPools( bytes32[] calldata poolIDs ) external view returns (uint256[] calldata rewards);

	function userRewardForPool( address wallet, bytes32 poolID ) external view returns (uint256);
	function userShareForPool( address wallet, bytes32 poolID ) external view returns (uint256);
	function userVirtualRewardsForPool( address wallet, bytes32 poolID ) external view returns (uint256);

	function userRewardsForPools( address wallet, bytes32[] calldata poolIDs ) external view returns (uint256[] calldata rewards);
	function userShareForPools( address wallet, bytes32[] calldata poolIDs ) external view returns (uint256[] calldata shares);
	function userCooldowns( address wallet, bytes32[] calldata poolIDs ) external view returns (uint256[] calldata cooldowns);
	}

// SPDX-License-Identifier: BUSL 1.1
pragma solidity =0.8.22;

import "../../staking/interfaces/ILiquidity.sol";
import "../../dao/interfaces/IDAO.sol";
import "./IPoolStats.sol";


interface IPools is IPoolStats
	{
	function startExchangeApproved() external;
	function setContracts( IDAO _dao, ILiquidity _liquidity ) external; // onlyOwner

	function addLiquidity( IERC20 tokenA, IERC20 tokenB, uint256 maxAmountA, uint256 maxAmountB, uint256 minAddedAmountA, uint256 minAddedAmountB, uint256 totalLiquidity ) external returns (uint256 addedAmountA, uint256 addedAmountB, uint256 addedLiquidity);
	function removeLiquidity( IERC20 tokenA, IERC20 tokenB, uint256 liquidityToRemove, uint256 minReclaimedA, uint256 minReclaimedB, uint256 totalLiquidity ) external returns (uint256 reclaimedA, uint256 reclaimedB);

	function deposit( IERC20 token, uint256 amount ) external;
	function withdraw( IERC20 token, uint256 amount ) external;
	function swap( IERC20 swapTokenIn, IERC20 swapTokenOut, uint256 swapAmountIn, uint256 minAmountOut, uint256 deadline ) external returns (uint256 swapAmountOut);
	function depositSwapWithdraw(IERC20 swapTokenIn, IERC20 swapTokenOut, uint256 swapAmountIn, uint256 minAmountOut, uint256 deadline ) external returns (uint256 swapAmountOut);
	function depositDoubleSwapWithdraw( IERC20 swapTokenIn, IERC20 swapTokenMiddle, IERC20 swapTokenOut, uint256 swapAmountIn, uint256 minAmountOut, uint256 deadline ) external returns (uint256 swapAmountOut);
	function depositZapSwapWithdraw(IERC20 swapTokenIn, IERC20 swapTokenOut, uint256 swapAmountIn ) external returns (uint256 swapAmountOut);

	// Views
	function exchangeIsLive() external view returns (bool);
	function getPoolReserves(IERC20 tokenA, IERC20 tokenB) external view returns (uint256 reserveA, uint256 reserveB);
	function depositedUserBalance(address user, IERC20 token) external view returns (uint256);
	}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

import "./math/Math.sol";
import "./math/SignedMath.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toString(int256 value) internal pure returns (string memory) {
        return string(abi.encodePacked(value < 0 ? "-" : "", toString(SignedMath.abs(value))));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return keccak256(bytes(a)) == keccak256(bytes(b));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: BUSL 1.1
pragma solidity =0.8.22;


interface IPoolStats
	{
	// These are the indicies (in terms of a poolIDs location in the current whitelistedPoolIDs array) of pools involved in an arbitrage path
	struct ArbitrageIndicies
		{
		uint64 index1;
		uint64 index2;
		uint64 index3;
		}

	function clearProfitsForPools() external;
	function updateArbitrageIndicies() external;

	// Views
	function profitsForWhitelistedPools() external view returns (uint256[] memory _calculatedProfits);
	function arbitrageIndicies(bytes32 poolID) external view returns (ArbitrageIndicies memory);
	}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1, "Math: mulDiv overflow");

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

{
  "remappings": [
    "chainlink/=lib/chainlink/",
    "ds-test/=lib/openzeppelin-contracts/lib/forge-std/lib/ds-test/src/",
    "erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
    "forge-std/=lib/openzeppelin-contracts/lib/forge-std/src/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/",
    "openzeppelin/=lib/openzeppelin-contracts/contracts/",
    "v3-core/=lib/v3-core/contracts/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 10000
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "paris",
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"contract IExchangeConfig","name":"_exchangeConfig","type":"address"},{"internalType":"contract IAirdrop","name":"_airdrop1","type":"address"},{"internalType":"contract IAirdrop","name":"_airdrop2","type":"address"},{"internalType":"uint256","name":"ballotDuration","type":"uint256"},{"internalType":"uint256","name":"airdrop2DelayTillDistribution","type":"uint256"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"bool","name":"startExchange","type":"bool"}],"name":"BallotFinalized","type":"event"},{"inputs":[],"name":"airdrop1","outputs":[{"internalType":"contract IAirdrop","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"airdrop2","outputs":[{"internalType":"contract IAirdrop","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"saltAmount","type":"uint256"},{"internalType":"bytes","name":"signature","type":"bytes"}],"name":"authorizeAirdrop2","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"ballotFinalized","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"claimableTimestamp1","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"claimableTimestamp2","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"exchangeConfig","outputs":[{"internalType":"contract IExchangeConfig","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"finalizeAirdrop2","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"finalizeBallot","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"wallet","type":"address"}],"name":"hasVoted","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"previousDeployment","outputs":[{"internalType":"contract IBootstrapBallot","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"startExchangeApproved","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"startExchangeNo","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"startExchangeYes","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bool","name":"voteStartExchangeYes","type":"bool"},{"internalType":"uint256","name":"saltAmount","type":"uint256"},{"internalType":"bytes","name":"signature","type":"bytes"}],"name":"vote","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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