Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.8.13;

import "./CurveFactoryV2.sol";
import "./Curve.sol";

import "../lib/openzeppelin-contracts/contracts/utils/math/SafeMath.sol";

import "../lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol";
import "../lib/openzeppelin-contracts/contracts/token/ERC20/utils/SafeERC20.sol";

// Simplistic router that assumes USD is the only quote currency for
contract Router {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    address public factory;

    constructor(address _factory) {
        require(_factory != address(0), "Curve/factory-cannot-be-zeroth-address");

        factory = _factory;
    }

    /// @notice view how much target amount a fixed origin amount will swap for
    /// @param _quoteCurrency the address of the quote currency (usually USDC)
    /// @param _origin the address of the origin
    /// @param _target the address of the target
    /// @param _originAmount the origin amount
    /// @return targetAmount_ the amount of target that will be returned
    function viewOriginSwap(
        address _quoteCurrency,
        address _origin,
        address _target,
        uint256 _originAmount
    ) external view returns (uint256 targetAmount_) {
        // If its an immediate pair then just swap directly on it
        address curve0 = CurveFactoryV2(factory).curves(keccak256(abi.encode(_origin, _target)));
        if (_origin == _quoteCurrency) {
            curve0 = CurveFactoryV2(factory).curves(keccak256(abi.encode(_target, _origin)));
        }
        if (curve0 != address(0)) {
            targetAmount_ = Curve(curve0).viewOriginSwap(_origin, _target, _originAmount);
            return targetAmount_;
        }

        // Otherwise go through the quote currency
        curve0 = CurveFactoryV2(factory).curves(keccak256(abi.encode(_origin, _quoteCurrency)));
        address curve1 = CurveFactoryV2(factory).curves(keccak256(abi.encode(_target, _quoteCurrency)));
        if (curve0 != address(0) && curve1 != address(0)) {
            uint256 _quoteAmount = Curve(curve0).viewOriginSwap(_origin, _quoteCurrency, _originAmount);
            targetAmount_ = Curve(curve1).viewOriginSwap(_quoteCurrency, _target, _quoteAmount);
            return targetAmount_;
        }

        revert("Router/No-path");
    }

    /// @notice swap a dynamic origin amount for a fixed target amount
    /// @param _quoteCurrency the address of the quote currency (usually USDC)
    /// @param _origin the address of the origin
    /// @param _target the address of the target
    /// @param _originAmount the origin amount
    /// @param _minTargetAmount the minimum target amount
    /// @param _deadline deadline in block number after which the trade will not execute
    /// @return targetAmount_ the amount of target that has been swapped for the origin amount
    function originSwap(
        address _quoteCurrency,
        address _origin,
        address _target,
        uint256 _originAmount,
        uint256 _minTargetAmount,
        uint256 _deadline
    ) public returns (uint256 targetAmount_) {
        IERC20(_origin).safeTransferFrom(msg.sender, address(this), _originAmount);

        // If its an immediate pair then just swap directly on it
        address curve0 = CurveFactoryV2(factory).curves(keccak256(abi.encode(_origin, _target)));
        if (_origin == _quoteCurrency) {
            curve0 = CurveFactoryV2(factory).curves(keccak256(abi.encode(_target, _origin)));
        }
        if (curve0 != address(0)) {
            IERC20(_origin).safeApprove(curve0, _originAmount);
            targetAmount_ = Curve(curve0).originSwap(_origin, _target, _originAmount, _minTargetAmount, _deadline);
            IERC20(_target).safeTransfer(msg.sender, targetAmount_);
            return targetAmount_;
        }

        // Otherwise go through the quote currency
        curve0 = CurveFactoryV2(factory).curves(keccak256(abi.encode(_origin, _quoteCurrency)));
        address curve1 = CurveFactoryV2(factory).curves(keccak256(abi.encode(_target, _quoteCurrency)));
        if (curve0 != address(0) && curve1 != address(0)) {
            IERC20(_origin).safeApprove(curve0, _originAmount);
            uint256 _quoteAmount = Curve(curve0).originSwap(_origin, _quoteCurrency, _originAmount, 0, _deadline);

            IERC20(_quoteCurrency).safeApprove(curve1, _quoteAmount);
            targetAmount_ = Curve(curve1).originSwap(
                _quoteCurrency,
                _target,
                _quoteAmount,
                _minTargetAmount,
                _deadline
            );
            IERC20(_target).safeTransfer(msg.sender, targetAmount_);
            return targetAmount_;
        }

        revert("Router/No-path");
    }

    /// @notice view how much of the origin currency the target currency will take
    /// @param _quoteCurrency the address of the quote currency (usually USDC)
    /// @param _origin the address of the origin
    /// @param _target the address of the target
    /// @param _targetAmount the target amount
    /// @return originAmount_ the amount of target that has been swapped for the origin
    function viewTargetSwap(
        address _quoteCurrency,
        address _origin,
        address _target,
        uint256 _targetAmount
    ) public view returns (uint256 originAmount_) {
        // If its an immediate pair then just swap directly on it
        address curve0 = CurveFactoryV2(factory).curves(keccak256(abi.encode(_origin, _target)));
        if (_origin == _quoteCurrency) {
            curve0 = CurveFactoryV2(factory).curves(keccak256(abi.encode(_target, _origin)));
        }

        if (curve0 != address(0)) {
            originAmount_ = Curve(curve0).viewTargetSwap(_origin, _target, _targetAmount);
            return originAmount_;
        }

        // Otherwise go through the quote currency
        curve0 = CurveFactoryV2(factory).curves(keccak256(abi.encode(_target, _quoteCurrency)));
        address curve1 = CurveFactoryV2(factory).curves(keccak256(abi.encode(_origin, _quoteCurrency)));
        if (curve0 != address(0) && curve1 != address(0)) {
            uint256 _quoteAmount = Curve(curve0).viewTargetSwap(_quoteCurrency, _target, _targetAmount);
            originAmount_ = Curve(curve1).viewTargetSwap(_origin, _quoteCurrency, _quoteAmount);
            return originAmount_;
        }

        revert("Router/No-path");
    }
}

// SPDX-License-Identifier: MIT

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is disstributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.8.13;
pragma experimental ABIEncoderV2;

// Finds new Curves! logs their addresses and provides `isCurve(address) -> (bool)`

import "../lib/openzeppelin-contracts/contracts/utils/Address.sol";
import "../lib/openzeppelin-contracts/contracts/access/Ownable.sol";

import "./Curve.sol";
import "./interfaces/IFreeFromUpTo.sol";
import "./AssimilatorFactory.sol";
import "./assimilators/AssimilatorV2.sol";
import "./interfaces/ICurveFactory.sol";
import "./interfaces/IAssimilatorFactory.sol";
import "./Structs.sol";

contract CurveFactoryV2 is ICurveFactory, Ownable {
    using Address for address;

    IAssimilatorFactory public immutable assimilatorFactory;

    // add protocol fee
    int128 public totoalFeePercentage = 100000;
    int128 public protocolFee;
    address public protocolTreasury;

    event TreasuryUpdated(address indexed newTreasury);
    event ProtocolFeeUpdated(address indexed treasury, int128 indexed fee);

    event NewCurve(address indexed caller, bytes32 indexed id, address indexed curve);

    mapping(bytes32 => address) public curves;

    constructor(
        int128 _protocolFee,
        address _treasury,
        address _assimFactory
    ) {
        require(totoalFeePercentage >= _protocolFee, "CurveFactory/protocol-fee-cannot-be-over-100-percent");
        require(_treasury != address(0), "CurveFactory/zero-treasury-address");
        protocolFee = _protocolFee;
        protocolTreasury = _treasury;

        require(_assimFactory.isContract(), "CurveFactory/invalid-assimilatorFactory");
        assimilatorFactory = IAssimilatorFactory(_assimFactory);
    }

    function getProtocolFee() external view virtual override returns (int128) {
        return protocolFee;
    }

    function getProtocolTreasury() external view virtual override returns (address) {
        return protocolTreasury;
    }

    function updateProtocolTreasury(address _newTreasury) external onlyOwner {
        require(_newTreasury != protocolTreasury, "CurveFactory/same-treasury-address");
        require(_newTreasury != address(0), "CurveFactory/zero-treasury-address");
        protocolTreasury = _newTreasury;
        emit TreasuryUpdated(protocolTreasury);
    }

    function updateProtocolFee(int128 _newFee) external onlyOwner {
        require(totoalFeePercentage >= _newFee, "CurveFactory/protocol-fee-cannot-be-over-100-percent");
        require(_newFee != protocolFee, "CurveFactory/same-protocol-fee");
        protocolFee = _newFee;
        emit ProtocolFeeUpdated(protocolTreasury, protocolFee);
    }

    function getCurve(address _baseCurrency, address _quoteCurrency) external view returns (address) {
        bytes32 curveId = keccak256(abi.encode(_baseCurrency, _quoteCurrency));
        return (curves[curveId]);
    }

    function newCurve(CurveInfo memory _info) public returns (Curve) {
        bytes32 curveId = keccak256(abi.encode(_info._baseCurrency, _info._quoteCurrency));
        if (curves[curveId] != address(0)) revert("CurveFactory/currency-pair-already-exists");
        AssimilatorV2 _baseAssim;
        _baseAssim = (assimilatorFactory.getAssimilator(_info._baseCurrency));
        if (address(_baseAssim) == address(0))
            _baseAssim = (assimilatorFactory.newAssimilator(_info._baseOracle, _info._baseCurrency, _info._baseDec));
        AssimilatorV2 _quoteAssim;
        _quoteAssim = (assimilatorFactory.getAssimilator(_info._quoteCurrency));
        if (address(_quoteAssim) == address(0))
            _quoteAssim = (
                assimilatorFactory.newAssimilator(_info._quoteOracle, _info._quoteCurrency, _info._quoteDec)
            );

        address[] memory _assets = new address[](10);
        uint256[] memory _assetWeights = new uint256[](2);

        // Base Currency
        _assets[0] = _info._baseCurrency;
        _assets[1] = address(_baseAssim);
        _assets[2] = _info._baseCurrency;
        _assets[3] = address(_baseAssim);
        _assets[4] = _info._baseCurrency;

        // Quote Currency (typically USDC)
        _assets[5] = _info._quoteCurrency;
        _assets[6] = address(_quoteAssim);
        _assets[7] = _info._quoteCurrency;
        _assets[8] = address(_quoteAssim);
        _assets[9] = _info._quoteCurrency;

        // Weights
        _assetWeights[0] = _info._baseWeight;
        _assetWeights[1] = _info._quoteWeight;

        // New curve
        Curve curve = new Curve(_info._name, _info._symbol, _assets, _assetWeights, address(this));
        curve.setParams(
            _info._alpha,
            _info._beta,
            _info._feeAtHalt,
            _info._epsilon,
            _info._lambda
        );
        curve.transferOwnership(protocolTreasury);
        curves[curveId] = address(curve);

        emit NewCurve(msg.sender, curveId, address(curve));

        return curve;
    }
}

// SPDX-License-Identifier: MIT

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.8.13;
pragma experimental ABIEncoderV2;

import './interfaces/IFlashCallback.sol';

import "../lib/openzeppelin-contracts/contracts/token/ERC20/utils/SafeERC20.sol";

import "./lib/ABDKMath64x64.sol";

import "./lib/FullMath.sol";

import "./lib/NoDelegateCall.sol";

import "./Orchestrator.sol";

import "./ProportionalLiquidity.sol";

import "./Swaps.sol";

import "./ViewLiquidity.sol";

import "./Storage.sol";

import "./MerkleProver.sol";

import "./interfaces/IFreeFromUpTo.sol";

import "./interfaces/ICurveFactory.sol";

import "./Structs.sol";

library Curves {
    using ABDKMath64x64 for int128;

    event Approval(address indexed _owner, address indexed spender, uint256 value);
    event Transfer(address indexed from, address indexed to, uint256 value);

    function add(
        uint256 x,
        uint256 y,
        string memory errorMessage
    ) private pure returns (uint256 z) {
        require((z = x + y) >= x, errorMessage);
    }

    function sub(
        uint256 x,
        uint256 y,
        string memory errorMessage
    ) private pure returns (uint256 z) {
        require((z = x - y) <= x, errorMessage);
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(
        Storage.Curve storage curve,
        address recipient,
        uint256 amount
    ) external returns (bool) {
        _transfer(curve, msg.sender, recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(
        Storage.Curve storage curve,
        address spender,
        uint256 amount
    ) external returns (bool) {
        _approve(curve, msg.sender, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for `sender`'s tokens of at least
     * `amount`
     */
    function transferFrom(
        Storage.Curve storage curve,
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool) {
        _transfer(curve, sender, recipient, amount);
        _approve(
            curve,
            sender,
            msg.sender,
            sub(curve.allowances[sender][msg.sender], amount, "Curve/insufficient-allowance")
        );
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(
        Storage.Curve storage curve,
        address spender,
        uint256 addedValue
    ) external returns (bool) {
        _approve(
            curve,
            msg.sender,
            spender,
            add(curve.allowances[msg.sender][spender], addedValue, "Curve/approval-overflow")
        );
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(
        Storage.Curve storage curve,
        address spender,
        uint256 subtractedValue
    ) external returns (bool) {
        _approve(
            curve,
            msg.sender,
            spender,
            sub(curve.allowances[msg.sender][spender], subtractedValue, "Curve/allowance-decrease-underflow")
        );
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is public function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(
        Storage.Curve storage curve,
        address sender,
        address recipient,
        uint256 amount
    ) private {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        curve.balances[sender] = sub(curve.balances[sender], amount, "Curve/insufficient-balance");
        curve.balances[recipient] = add(curve.balances[recipient], amount, "Curve/transfer-overflow");
        emit Transfer(sender, recipient, amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `_owner`s tokens.
     *
     * This is public function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `_owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        Storage.Curve storage curve,
        address _owner,
        address spender,
        uint256 amount
    ) private {
        require(_owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        curve.allowances[_owner][spender] = amount;
        emit Approval(_owner, spender, amount);
    }
}

contract Curve is Storage, MerkleProver, NoDelegateCall {
    using SafeMath for uint256;
    using ABDKMath64x64 for int128;
    using SafeERC20 for IERC20;

    address private curveFactory;

    event Approval(address indexed _owner, address indexed spender, uint256 value);

    event ParametersSet(uint256 alpha, uint256 beta, uint256 delta, uint256 epsilon, uint256 lambda);

    event AssetIncluded(address indexed numeraire, address indexed reserve, uint256 weight);

    event AssimilatorIncluded(
        address indexed derivative,
        address indexed numeraire,
        address indexed reserve,
        address assimilator
    );

    event PartitionRedeemed(address indexed token, address indexed redeemer, uint256 value);

    event OwnershipTransfered(address indexed previousOwner, address indexed newOwner);

    event FrozenSet(bool isFrozen);

    event EmergencyAlarm(bool isEmergency);

    event WhitelistingStopped();

    event Trade(
        address indexed trader,
        address indexed origin,
        address indexed target,
        uint256 originAmount,
        uint256 targetAmount
    );

    event Transfer(address indexed from, address indexed to, uint256 value);

    event Flash(address indexed from, address indexed to, uint256 value0, uint256 value1, uint256 paid0, uint256 paid1);

    modifier onlyOwner() {
        require(msg.sender == owner, "Curve/caller-is-not-owner");
        _;
    }

    modifier nonReentrant() {
        require(notEntered, "Curve/re-entered");
        notEntered = false;
        _;
        notEntered = true;
    }

    modifier transactable() {
        require(!frozen, "Curve/frozen-only-allowing-proportional-withdraw");
        _;
    }

    modifier isEmergency() {
        require(emergency, "Curve/emergency-only-allowing-emergency-proportional-withdraw");
        _;
    }

    modifier isNotEmergency() {
        require(!emergency, "Curve/emergency-only-allowing-emergency-proportional-withdraw");
        _;
    }

    modifier deadline(uint256 _deadline) {
        require(block.timestamp < _deadline, "Curve/tx-deadline-passed");
        _;
    }

    modifier inWhitelistingStage() {
        require(whitelistingStage, "Curve/whitelist-stage-stopped");
        _;
    }

    modifier notInWhitelistingStage() {
        require(!whitelistingStage, "Curve/whitelist-stage-on-going");
        _;
    }

    constructor(
        string memory _name,
        string memory _symbol,
        address[] memory _assets,
        uint256[] memory _assetWeights,
        address _factory
    ) {
        owner = msg.sender;
        name = _name;
        symbol = _symbol;
        curveFactory = _factory;
        emit OwnershipTransfered(address(0), msg.sender);

        Orchestrator.initialize(curve, numeraires, reserves, derivatives, _assets, _assetWeights);
    }

    /// @notice sets the parameters for the pool
    /// @param _alpha the value for alpha (halt threshold) must be less than or equal to 1 and greater than 0
    /// @param _beta the value for beta must be less than alpha and greater than 0
    /// @param _feeAtHalt the maximum value for the fee at the halt point
    /// @param _epsilon the base fee for the pool
    /// @param _lambda the value for lambda must be less than or equal to 1 and greater than zero
    function setParams(
        uint256 _alpha,
        uint256 _beta,
        uint256 _feeAtHalt,
        uint256 _epsilon,
        uint256 _lambda
    ) external onlyOwner {
        Orchestrator.setParams(curve, _alpha, _beta, _feeAtHalt, _epsilon, _lambda);
    }

    /// @notice excludes an assimilator from the curve
    /// @param _derivative the address of the assimilator to exclude
    function excludeDerivative(address _derivative) external onlyOwner {
        for (uint256 i = 0; i < numeraires.length; i++) {
            if (_derivative == numeraires[i]) revert("Curve/cannot-delete-numeraire");
            if (_derivative == reserves[i]) revert("Curve/cannot-delete-reserve");
        }

        delete curve.assimilators[_derivative];
    }

    /// @notice view the current parameters of the curve
    /// @return alpha_ the current alpha value
    ///  beta_ the current beta value
    ///  delta_ the current delta value
    ///  epsilon_ the current epsilon value
    ///  lambda_ the current lambda value
    ///  omega_ the current omega value
    function viewCurve()
        external
        view
        returns (
            uint256 alpha_,
            uint256 beta_,
            uint256 delta_,
            uint256 epsilon_,
            uint256 lambda_
        )
    {
        return Orchestrator.viewCurve(curve);
    }

    function turnOffWhitelisting() external onlyOwner {
        emit WhitelistingStopped();

        whitelistingStage = false;
    }

    function setEmergency(bool _emergency) external onlyOwner {
        emit EmergencyAlarm(_emergency);

        emergency = _emergency;
    }

    function setFrozen(bool _toFreezeOrNotToFreeze) external onlyOwner {
        emit FrozenSet(_toFreezeOrNotToFreeze);

        frozen = _toFreezeOrNotToFreeze;
    }

    function transferOwnership(address _newOwner) external onlyOwner {
        require(_newOwner != address(0), "Curve/new-owner-cannot-be-zeroth-address");

        emit OwnershipTransfered(owner, _newOwner);

        owner = _newOwner;
    }

    /// @notice swap a dynamic origin amount for a fixed target amount
    /// @param _origin the address of the origin
    /// @param _target the address of the target
    /// @param _originAmount the origin amount
    /// @param _minTargetAmount the minimum target amount
    /// @param _deadline deadline in block number after which the trade will not execute
    /// @return targetAmount_ the amount of target that has been swapped for the origin amount
    function originSwap(
        address _origin,
        address _target,
        uint256 _originAmount,
        uint256 _minTargetAmount,
        uint256 _deadline
    ) external deadline(_deadline) transactable noDelegateCall isNotEmergency nonReentrant returns (uint256 targetAmount_) {
        OriginSwapData memory _swapData;
        _swapData._origin = _origin;
        _swapData._target = _target;
        _swapData._originAmount = _originAmount;
        _swapData._recipient = msg.sender;
        _swapData._curveFactory = curveFactory;
        targetAmount_ = Swaps.originSwap(curve, _swapData);
        // targetAmount_ = Swaps.originSwap(curve, _origin, _target, _originAmount, msg.sender,curveFactory);

        require(targetAmount_ >= _minTargetAmount, "Curve/below-min-target-amount");
    }

    /// @notice view how much target amount a fixed origin amount will swap for
    /// @param _origin the address of the origin
    /// @param _target the address of the target
    /// @param _originAmount the origin amount
    /// @return targetAmount_ the target amount that would have been swapped for the origin amount
    function viewOriginSwap(
        address _origin,
        address _target,
        uint256 _originAmount
    ) external view transactable returns (uint256 targetAmount_) {
        targetAmount_ = Swaps.viewOriginSwap(curve, _origin, _target, _originAmount);
    }

    /// @notice swap a dynamic origin amount for a fixed target amount
    /// @param _origin the address of the origin
    /// @param _target the address of the target
    /// @param _maxOriginAmount the maximum origin amount
    /// @param _targetAmount the target amount
    /// @param _deadline deadline in block number after which the trade will not execute
    /// @return originAmount_ the amount of origin that has been swapped for the target
    function targetSwap(
        address _origin,
        address _target,
        uint256 _maxOriginAmount,
        uint256 _targetAmount,
        uint256 _deadline
    ) external deadline(_deadline) transactable noDelegateCall isNotEmergency nonReentrant returns (uint256 originAmount_) {
        TargetSwapData memory _swapData;
        _swapData._origin = _origin;
        _swapData._target = _target;
        _swapData._targetAmount = _targetAmount;
        _swapData._recipient = msg.sender;
        _swapData._curveFactory = curveFactory;
        originAmount_ = Swaps.targetSwap(curve, _swapData);
        // originAmount_ = Swaps.targetSwap(curve, _origin, _target, _targetAmount, msg.sender,curveFactory);

        require(originAmount_ <= _maxOriginAmount, "Curve/above-max-origin-amount");
    }

    /// @notice view how much of the origin currency the target currency will take
    /// @param _origin the address of the origin
    /// @param _target the address of the target
    /// @param _targetAmount the target amount
    /// @return originAmount_ the amount of target that has been swapped for the origin
    function viewTargetSwap(
        address _origin,
        address _target,
        uint256 _targetAmount
    ) external view transactable returns (uint256 originAmount_) {
        originAmount_ = Swaps.viewTargetSwap(curve, _origin, _target, _targetAmount);
    }

    /// @notice deposit into the pool with no slippage from the numeraire assets the pool supports
    /// @param  index Index corresponding to the merkleProof
    /// @param  account Address coorresponding to the merkleProof
    /// @param  amount Amount coorresponding to the merkleProof, should always be 1
    /// @param  merkleProof Merkle proof
    /// @param  _deposit the full amount you want to deposit into the pool which will be divided up evenly amongst
    ///                  the numeraire assets of the pool
    /// @return (the amount of curves you receive in return for your deposit,
    ///          the amount deposited for each numeraire)
    function depositWithWhitelist(
        uint256 index,
        address account,
        uint256 amount,
        bytes32[] calldata merkleProof,
        uint256 _deposit,
        uint256 _deadline
    ) external deadline(_deadline) transactable nonReentrant noDelegateCall inWhitelistingStage returns (uint256, uint256[] memory) {
        require(amount == 1, "Curve/invalid-amount");
        require(index <= 473, "Curve/index-out-of-range" );
        require(isWhitelisted(index, account, amount, merkleProof), "Curve/not-whitelisted");
        require(msg.sender == account, "Curve/not-approved-user");

        (uint256 curvesMinted_, uint256[] memory deposits_) =
            ProportionalLiquidity.proportionalDeposit(curve, _deposit);

        whitelistedDeposited[msg.sender] = whitelistedDeposited[msg.sender].add(curvesMinted_);

        // 10k max deposit
        if (whitelistedDeposited[msg.sender] > 10000e18) {
            revert("Curve/exceed-whitelist-maximum-deposit");
        }

        return (curvesMinted_, deposits_);
    }

    /// @notice deposit into the pool with no slippage from the numeraire assets the pool supports
    /// @param  _deposit the full amount you want to deposit into the pool which will be divided up evenly amongst
    ///                  the numeraire assets of the pool
    /// @return (the amount of curves you receive in return for your deposit,
    ///          the amount deposited for each numeraire)
    function deposit(uint256 _deposit, uint256 _deadline)
        external
        deadline(_deadline)
        transactable
        nonReentrant
        noDelegateCall
        notInWhitelistingStage
        isNotEmergency
        returns (uint256, uint256[] memory)
    {
        // (curvesMinted_,  deposits_)
        return ProportionalLiquidity.proportionalDeposit(curve, _deposit);
    }

    /// @notice view deposits and curves minted a given deposit would return
    /// @param _deposit the full amount of stablecoins you want to deposit. Divided evenly according to the
    ///                 prevailing proportions of the numeraire assets of the pool
    /// @return (the amount of curves you receive in return for your deposit,
    ///          the amount deposited for each numeraire)
    function viewDeposit(uint256 _deposit) external view transactable returns (uint256, uint256[] memory) {
        // curvesToMint_, depositsToMake_
        return ProportionalLiquidity.viewProportionalDeposit(curve, _deposit);
    }

    /// @notice  Emergency withdraw tokens in the event that the oracle somehow bugs out
    ///          and no one is able to withdraw due to the invariant check
    /// @param   _curvesToBurn the full amount you want to withdraw from the pool which will be withdrawn from evenly amongst the
    ///                        numeraire assets of the pool
    /// @return withdrawals_ the amonts of numeraire assets withdrawn from the pool
    function emergencyWithdraw(uint256 _curvesToBurn, uint256 _deadline)
        external
        isEmergency
        deadline(_deadline)
        nonReentrant
        noDelegateCall
        returns (uint256[] memory withdrawals_)
    {
        return ProportionalLiquidity.proportionalWithdraw(curve, _curvesToBurn);
    }

    /// @notice  withdrawas amount of curve tokens from the the pool equally from the numeraire assets of the pool with no slippage
    /// @param   _curvesToBurn the full amount you want to withdraw from the pool which will be withdrawn from evenly amongst the
    ///                        numeraire assets of the pool
    /// @return withdrawals_ the amonts of numeraire assets withdrawn from the pool
    function withdraw(uint256 _curvesToBurn, uint256 _deadline)
        external
        deadline(_deadline)
        nonReentrant
        noDelegateCall
        isNotEmergency
        returns (uint256[] memory withdrawals_)
    {
        if (whitelistingStage) {
            whitelistedDeposited[msg.sender] = whitelistedDeposited[msg.sender].sub(_curvesToBurn);
        }

        return ProportionalLiquidity.proportionalWithdraw(curve, _curvesToBurn);
    }

    /// @notice  views the withdrawal information from the pool
    /// @param   _curvesToBurn the full amount you want to withdraw from the pool which will be withdrawn from evenly amongst the
    ///                        numeraire assets of the pool
    /// @return the amonnts of numeraire assets withdrawn from the pool
    function viewWithdraw(uint256 _curvesToBurn) external view transactable returns (uint256[] memory) {
        return ProportionalLiquidity.viewProportionalWithdraw(curve, _curvesToBurn);
    }

    function supportsInterface(bytes4 _interface) public pure returns (bool supports_) {
        supports_ =
            this.supportsInterface.selector == _interface || // erc165
            bytes4(0x7f5828d0) == _interface || // eip173
            bytes4(0x36372b07) == _interface; // erc20
    }

    /// @notice transfers curve tokens
    /// @param _recipient the address of where to send the curve tokens
    /// @param _amount the amount of curve tokens to send
    /// @return success_ the success bool of the call
    function transfer(address _recipient, uint256 _amount) public nonReentrant noDelegateCall isNotEmergency returns (bool success_) {
        success_ = Curves.transfer(curve, _recipient, _amount);
    }

    /// @notice transfers curve tokens from one address to another address
    /// @param _sender the account from which the curve tokens will be sent
    /// @param _recipient the account to which the curve tokens will be sent
    /// @param _amount the amount of curve tokens to transfer
    /// @return success_ the success bool of the call
    function transferFrom(
        address _sender,
        address _recipient,
        uint256 _amount
    ) public nonReentrant noDelegateCall isNotEmergency returns (bool success_) {
        success_ = Curves.transferFrom(curve, _sender, _recipient, _amount);
    }

    /// @notice approves a user to spend curve tokens on their behalf
    /// @param _spender the account to allow to spend from msg.sender
    /// @param _amount the amount to specify the spender can spend
    /// @return success_ the success bool of this call
    function approve(address _spender, uint256 _amount) public nonReentrant noDelegateCall returns (bool success_) {
        success_ = Curves.approve(curve, _spender, _amount);
    }
    
    function flash(
        address recipient,
        uint256 amount0,
        uint256 amount1,
        bytes calldata data
    ) external transactable noDelegateCall isNotEmergency {
        uint256 fee = curve.epsilon.mulu(1e18);
        
        require(IERC20(derivatives[0]).balanceOf(address(this)) > 0, 'Curve/token0-zero-liquidity-depth');
        require(IERC20(derivatives[1]).balanceOf(address(this)) > 0, 'Curve/token1-zero-liquidity-depth');
        
        uint256 fee0 = FullMath.mulDivRoundingUp(amount0, fee, 1e18);
        uint256 fee1 = FullMath.mulDivRoundingUp(amount1, fee, 1e18);
        uint256 balance0Before = IERC20(derivatives[0]).balanceOf(address(this));
        uint256 balance1Before = IERC20(derivatives[1]).balanceOf(address(this));

        if (amount0 > 0) IERC20(derivatives[0]).safeTransfer(recipient, amount0);
        if (amount1 > 0) IERC20(derivatives[1]).safeTransfer(recipient, amount1);

        IFlashCallback(msg.sender).flashCallback(fee0, fee1, data);

        uint256 balance0After = IERC20(derivatives[0]).balanceOf(address(this));
        uint256 balance1After = IERC20(derivatives[1]).balanceOf(address(this));

        require(balance0Before.add(fee0) <= balance0After, 'Curve/insufficient-token0-returned');
        require(balance1Before.add(fee1) <= balance1After, 'Curve/insufficient-token1-returned');

        // sub is safe because we know balanceAfter is gt balanceBefore by at least fee
        uint256 paid0 = balance0After - balance0Before;
        uint256 paid1 = balance1After - balance1Before;

        IERC20(derivatives[0]).safeTransfer(owner, paid0);        
        IERC20(derivatives[1]).safeTransfer(owner, paid1);        

        emit Flash(msg.sender, recipient, amount0, amount1, paid0, paid1);
    }    

    /// @notice view the curve token balance of a given account
    /// @param _account the account to view the balance of
    /// @return balance_ the curve token ballance of the given account
    function balanceOf(address _account) public view returns (uint256 balance_) {
        balance_ = curve.balances[_account];
    }

    /// @notice views the total curve supply of the pool
    /// @return totalSupply_ the total supply of curve tokens
    function totalSupply() public view returns (uint256 totalSupply_) {
        totalSupply_ = curve.totalSupply;
    }

    /// @notice views the total allowance one address has to spend from another address
    /// @param _owner the address of the owner
    /// @param _spender the address of the spender
    /// @return allowance_ the amount the owner has allotted the spender
    function allowance(address _owner, address _spender) public view returns (uint256 allowance_) {
        allowance_ = curve.allowances[_owner][_spender];
    }

    /// @notice views the total amount of liquidity in the curve in numeraire value and format - 18 decimals
    /// @return total_ the total value in the curve
    /// @return individual_ the individual values in the curve
    function liquidity() public view returns (uint256 total_, uint256[] memory individual_) {
        return ViewLiquidity.viewLiquidity(curve);
    }

    /// @notice view the assimilator address for a derivative
    /// @return assimilator_ the assimilator address
    function assimilator(address _derivative) public view returns (address assimilator_) {
        assimilator_ = curve.assimilators[_derivative].addr;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (utils/math/SafeMath.sol)

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.8.13;

interface IFreeFromUpTo {
    function freeFromUpTo(address from, uint256 value) external returns (uint256 freed);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

import "./assimilators/AssimilatorV2.sol";
import "../lib/openzeppelin-contracts/contracts/access/Ownable.sol";
import "./interfaces/IAssimilatorFactory.sol";
import "./interfaces/IOracle.sol";

contract AssimilatorFactory is IAssimilatorFactory, Ownable {
    event NewAssimilator(address indexed caller, bytes32 indexed id, address indexed assimilator, address oracle, address token);
    event AssimilatorRevoked(address indexed caller, bytes32 indexed id, address indexed assimilator);
    event CurveFactoryUpdated(address indexed caller, address indexed curveFactory);
    mapping(bytes32 => AssimilatorV2) public assimilators;

    address public curveFactory;

    modifier onlyCurveFactory {
        require(msg.sender == curveFactory, "unauthorized");
        _;
    }

    function setCurveFactory(address _curveFactory) external onlyOwner {
        curveFactory = _curveFactory;
        emit CurveFactoryUpdated(msg.sender, curveFactory);
    }

    function getAssimilator(address _token) external view override returns (AssimilatorV2) {
        bytes32 assimilatorID = keccak256(abi.encode(_token));
        return assimilators[assimilatorID];
    }

    function newAssimilator(
        IOracle _oracle,
        address _token,
        uint256 _tokenDecimals
    ) external override onlyCurveFactory returns (AssimilatorV2) {
        bytes32 assimilatorID = keccak256(abi.encode(_token));
        if (address(assimilators[assimilatorID]) != address(0))
            revert("AssimilatorFactory/oracle-stablecoin-pair-already-exists");
        AssimilatorV2 assimilator = new AssimilatorV2(_oracle, _token, _tokenDecimals, IOracle(_oracle).decimals());
        assimilators[assimilatorID] = assimilator;
        emit NewAssimilator(msg.sender, assimilatorID, address(assimilator), address(_oracle), _token);
        return assimilator;
    }

    function revokeAssimilator(address _token) external onlyOwner {
        bytes32 assimilatorID = keccak256(abi.encode(_token));
        address _assimAddress = address(assimilators[assimilatorID]);
        assimilators[assimilatorID] = AssimilatorV2(address(0));
        emit AssimilatorRevoked(msg.sender, assimilatorID, address(_assimAddress));
    }
}

// SPDX-License-Identifier: MIT

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.8.13;

import "../../lib/openzeppelin-contracts/contracts/token/ERC20/utils/SafeERC20.sol";
import "../../lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol";
import "../../lib/openzeppelin-contracts/contracts/utils/math/SafeMath.sol";

import "../lib/ABDKMath64x64.sol";
import "../interfaces/IAssimilator.sol";
import "../interfaces/IOracle.sol";

contract AssimilatorV2 is IAssimilator {
    using ABDKMath64x64 for int128;
    using ABDKMath64x64 for uint256;

    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    IERC20 private constant usdc = IERC20(0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48);

    IOracle private immutable oracle;
    IERC20 private immutable token;
    uint256 private immutable oracleDecimals;
    uint256 private immutable tokenDecimals;

    // solhint-disable-next-line
    constructor(
        IOracle _oracle,
        address _token,
        uint256 _tokenDecimals,
        uint256 _oracleDecimals
    ) {
        oracle = _oracle;
        token = IERC20(_token);
        oracleDecimals = _oracleDecimals;
        tokenDecimals = _tokenDecimals;
    }

    function getRate() public view override returns (uint256) {
        (, int256 price, , , ) = oracle.latestRoundData();
        return uint256(price);
    }

    // takes raw eurs amount, transfers it in, calculates corresponding numeraire amount and returns it
    function intakeRawAndGetBalance(uint256 _amount) external override returns (int128 amount_, int128 balance_) {
        token.safeTransferFrom(msg.sender, address(this), _amount);

        uint256 _balance = token.balanceOf(address(this));

        uint256 _rate = getRate();

        balance_ = ((_balance * _rate) / 10**oracleDecimals).divu(10**tokenDecimals);

        amount_ = ((_amount * _rate) / 10**oracleDecimals).divu(10**tokenDecimals);
    }

    // takes raw eurs amount, transfers it in, calculates corresponding numeraire amount and returns it
    function intakeRaw(uint256 _amount) external override returns (int128 amount_) {
        token.safeTransferFrom(msg.sender, address(this), _amount);
        
        uint256 _rate = getRate();

        amount_ = ((_amount * _rate) / 10**oracleDecimals).divu(10**tokenDecimals);
    }

    // takes a numeraire amount, calculates the raw amount of eurs, transfers it in and returns the corresponding raw amount
    function intakeNumeraire(int128 _amount) external override returns (uint256 amount_) {
        uint256 _rate = getRate();

        amount_ = (_amount.mulu(10**tokenDecimals) * 10**oracleDecimals) / _rate;

        token.safeTransferFrom(msg.sender, address(this), amount_);
    }

    // takes a numeraire amount, calculates the raw amount of eurs, transfers it in and returns the corresponding raw amount
    function intakeNumeraireLPRatio(
        uint256 _baseWeight,
        uint256 _quoteWeight,
        address _addr,
        int128 _amount
    ) external override returns (uint256 amount_) {
        uint256 _tokenBal = token.balanceOf(_addr);

        if (_tokenBal <= 0) return 0;

        _tokenBal = _tokenBal.mul(1e18).div(_baseWeight);

        uint256 _usdcBal = usdc.balanceOf(_addr).mul(1e18).div(_quoteWeight);

        // Rate is in 1e6
        uint256 _rate = _usdcBal.mul(10**tokenDecimals).div(_tokenBal);

        amount_ = (_amount.mulu(10**tokenDecimals) * 1e6) / _rate;

        token.safeTransferFrom(msg.sender, address(this), amount_);
    }

    // takes a raw amount of eurs and transfers it out, returns numeraire value of the raw amount
    function outputRawAndGetBalance(address _dst, uint256 _amount)
        external
        override
        returns (int128 amount_, int128 balance_)
    {
        uint256 _rate = getRate();

        uint256 _tokenAmount = ((_amount) * _rate) / 10**oracleDecimals;

        token.safeTransfer(_dst, _tokenAmount);

        uint256 _balance = token.balanceOf(address(this));

        amount_ = _tokenAmount.divu(10**tokenDecimals);

        balance_ = ((_balance * _rate) / 10**oracleDecimals).divu(10**tokenDecimals);
    }

    // takes a raw amount of eurs and transfers it out, returns numeraire value of the raw amount
    function outputRaw(address _dst, uint256 _amount) external override returns (int128 amount_) {
        uint256 _rate = getRate();

        uint256 _tokenAmount = (_amount * _rate) / 10**oracleDecimals;

        token.safeTransfer(_dst, _tokenAmount);

        amount_ = _tokenAmount.divu(10**tokenDecimals);
    }

    // takes a numeraire value of eurs, figures out the raw amount, transfers raw amount out, and returns raw amount
    function outputNumeraire(address _dst, int128 _amount) external override returns (uint256 amount_) {
        uint256 _rate = getRate();

        amount_ = (_amount.mulu(10**tokenDecimals) * 10**oracleDecimals) / _rate;

        token.safeTransfer(_dst, amount_);
    }

    // takes a numeraire amount and returns the raw amount
    function viewRawAmount(int128 _amount) external view override returns (uint256 amount_) {
        uint256 _rate = getRate();

        amount_ = (_amount.mulu(10**tokenDecimals) * 10**oracleDecimals) / _rate;
    }

    function viewRawAmountLPRatio(
        uint256 _baseWeight,
        uint256 _quoteWeight,
        address _addr,
        int128 _amount
    ) external view override returns (uint256 amount_) {
        uint256 _tokenBal = token.balanceOf(_addr);

        if (_tokenBal <= 0) return 0;

        // 1e2
        _tokenBal = _tokenBal.mul(1e18).div(_baseWeight);

        // 1e6
        uint256 _usdcBal = usdc.balanceOf(_addr).mul(1e18).div(_quoteWeight);

        // Rate is in 1e6
        uint256 _rate = _usdcBal.mul(10**tokenDecimals).div(_tokenBal);

        amount_ = (_amount.mulu(10**tokenDecimals) * 1e6) / _rate;
    }

    // takes a raw amount and returns the numeraire amount
    function viewNumeraireAmount(uint256 _amount) external view override returns (int128 amount_) {
        uint256 _rate = getRate();

        amount_ = ((_amount * _rate) / 10**oracleDecimals).divu(10**tokenDecimals);
    }

    // views the numeraire value of the current balance of the reserve, in this case eurs
    function viewNumeraireBalance(address _addr) external view override returns (int128 balance_) {
        uint256 _rate = getRate();

        uint256 _balance = token.balanceOf(_addr);

        if (_balance <= 0) return ABDKMath64x64.fromUInt(0);

        balance_ = ((_balance * _rate) / 10**oracleDecimals).divu(10**tokenDecimals);
    }

    // views the numeraire value of the current balance of the reserve, in this case eurs
    function viewNumeraireAmountAndBalance(address _addr, uint256 _amount)
        external
        view
        override
        returns (int128 amount_, int128 balance_)
    {
        uint256 _rate = getRate();

        amount_ = ((_amount * _rate) / 10**oracleDecimals).divu(10**tokenDecimals);

        uint256 _balance = token.balanceOf(_addr);

        balance_ = ((_balance * _rate) / 10**oracleDecimals).divu(10**tokenDecimals);
    }

    // views the numeraire value of the current balance of the reserve, in this case eurs
    // instead of calculating with chainlink's "rate" it'll be determined by the existing
    // token ratio. This is in here to prevent LPs from losing out on future oracle price updates
    function viewNumeraireBalanceLPRatio(
        uint256 _baseWeight,
        uint256 _quoteWeight,
        address _addr
    ) external view override returns (int128 balance_) {
        uint256 _tokenBal = token.balanceOf(_addr);

        if (_tokenBal <= 0) return ABDKMath64x64.fromUInt(0);

        uint256 _usdcBal = usdc.balanceOf(_addr).mul(1e18).div(_quoteWeight);

        // Rate is in 1e6
        uint256 _rate = _usdcBal.mul(1e18).div(_tokenBal.mul(1e18).div(_baseWeight));

        balance_ = ((_tokenBal * _rate) / 1e6).divu(1e18);
    }

    function transferFee(int128 _amount, address _treasury) external override returns (bool transferSuccess_) {
        uint256 _rate = getRate();
        if(_amount < 0) _amount = - (_amount);
        uint256 amount = (_amount.mulu(10**tokenDecimals) * 10**oracleDecimals) / _rate;
        token.safeTransfer(_treasury, amount);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

interface ICurveFactory {
    function getProtocolFee() external view returns (int128);

    function getProtocolTreasury() external view returns (address);
}

// SPDX-License-Identifier: MIT

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.8.13;

import "../assimilators/AssimilatorV2.sol";
import "./IOracle.sol";

interface IAssimilatorFactory {
    function getAssimilator(address _token) external view returns (AssimilatorV2);

    function newAssimilator(
        IOracle _oracle,
        address _token,
        uint256 _tokenDecimals
    ) external returns (AssimilatorV2);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

import "./interfaces/ICurveFactory.sol";
import "./interfaces/IOracle.sol";

struct OriginSwapData {
    address _origin;
    address _target;
    uint256 _originAmount;
    address _recipient;
    address _curveFactory;
}

struct TargetSwapData {
    address _origin;
    address _target;
    uint256 _targetAmount;
    address _recipient;
    address _curveFactory;
}

struct SwapInfo {
    int128 totalAmount;
    int128 totalFee;
    int128 amountToUser;
    int128 amountToTreasury;
    int128 protocolFeePercentage;
    address treasury;
    ICurveFactory curveFactory;
}

struct CurveInfo {
    string _name;
    string _symbol;
    address _baseCurrency;
    address _quoteCurrency;
    uint256 _baseWeight;
    uint256 _quoteWeight;
    IOracle _baseOracle;
    uint256 _baseDec;
    IOracle _quoteOracle;
    uint256 _quoteDec;
    uint256 _alpha;
    uint256 _beta;
    uint256 _feeAtHalt;
    uint256 _epsilon;
    uint256 _lambda;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

interface IFlashCallback {
    function flashCallback(
        uint256 fee0,
        uint256 fee1,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: BSD-4-Clause
/*
 * ABDK Math 64.64 Smart Contract Library.  Copyright © 2019 by ABDK Consulting.
 * Author: Mikhail Vladimirov <[email protected]>
 */
pragma solidity ^0.8.13;

/**
 * Smart contract library of mathematical functions operating with signed
 * 64.64-bit fixed point numbers.  Signed 64.64-bit fixed point number is
 * basically a simple fraction whose numerator is signed 128-bit integer and
 * denominator is 2^64.  As long as denominator is always the same, there is no
 * need to store it, thus in Solidity signed 64.64-bit fixed point numbers are
 * represented by int128 type holding only the numerator.
 */
library ABDKMath64x64 {
  /*
   * Minimum value signed 64.64-bit fixed point number may have. 
   */
  int128 private constant MIN_64x64 = -0x80000000000000000000000000000000;

  /*
   * Maximum value signed 64.64-bit fixed point number may have. 
   */
  int128 private constant MAX_64x64 = 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF;

  /**
   * Convert signed 256-bit integer number into signed 64.64-bit fixed point
   * number.  Revert on overflow.
   *
   * @param x signed 256-bit integer number
   * @return signed 64.64-bit fixed point number
   */
  function fromInt (int256 x) internal pure returns (int128) {
    unchecked {
      require (x >= -0x8000000000000000 && x <= 0x7FFFFFFFFFFFFFFF);
      return int128 (x << 64);
    }
  }

  /**
   * Convert signed 64.64 fixed point number into signed 64-bit integer number
   * rounding down.
   *
   * @param x signed 64.64-bit fixed point number
   * @return signed 64-bit integer number
   */
  function toInt (int128 x) internal pure returns (int64) {
    unchecked {
      return int64 (x >> 64);
    }
  }

  /**
   * Convert unsigned 256-bit integer number into signed 64.64-bit fixed point
   * number.  Revert on overflow.
   *
   * @param x unsigned 256-bit integer number
   * @return signed 64.64-bit fixed point number
   */
  function fromUInt (uint256 x) internal pure returns (int128) {
    unchecked {
      require (x <= 0x7FFFFFFFFFFFFFFF);
      return int128 (int256 (x << 64));
    }
  }

  /**
   * Convert signed 64.64 fixed point number into unsigned 64-bit integer
   * number rounding down.  Revert on underflow.
   *
   * @param x signed 64.64-bit fixed point number
   * @return unsigned 64-bit integer number
   */
  function toUInt (int128 x) internal pure returns (uint64) {
    unchecked {
      require (x >= 0);
      return uint64 (uint128 (x >> 64));
    }
  }

  /**
   * Convert signed 128.128 fixed point number into signed 64.64-bit fixed point
   * number rounding down.  Revert on overflow.
   *
   * @param x signed 128.128-bin fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function from128x128 (int256 x) internal pure returns (int128) {
    unchecked {
      int256 result = x >> 64;
      require (result >= MIN_64x64 && result <= MAX_64x64);
      return int128 (result);
    }
  }

  /**
   * Convert signed 64.64 fixed point number into signed 128.128 fixed point
   * number.
   *
   * @param x signed 64.64-bit fixed point number
   * @return signed 128.128 fixed point number
   */
  function to128x128 (int128 x) internal pure returns (int256) {
    unchecked {
      return int256 (x) << 64;
    }
  }

  /**
   * Calculate x + y.  Revert on overflow.
   *
   * @param x signed 64.64-bit fixed point number
   * @param y signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function add (int128 x, int128 y) internal pure returns (int128) {
    unchecked {
      int256 result = int256(x) + y;
      require (result >= MIN_64x64 && result <= MAX_64x64);
      return int128 (result);
    }
  }

  /**
   * Calculate x - y.  Revert on overflow.
   *
   * @param x signed 64.64-bit fixed point number
   * @param y signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function sub (int128 x, int128 y) internal pure returns (int128) {
    unchecked {
      int256 result = int256(x) - y;
      require (result >= MIN_64x64 && result <= MAX_64x64);
      return int128 (result);
    }
  }

  /**
   * Calculate x * y rounding down.  Revert on overflow.
   *
   * @param x signed 64.64-bit fixed point number
   * @param y signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function mul (int128 x, int128 y) internal pure returns (int128) {
    unchecked {
      int256 result = int256(x) * y >> 64;
      require (result >= MIN_64x64 && result <= MAX_64x64);
      return int128 (result);
    }
  }

  /**
   * Calculate x * y rounding towards zero, where x is signed 64.64 fixed point
   * number and y is signed 256-bit integer number.  Revert on overflow.
   *
   * @param x signed 64.64 fixed point number
   * @param y signed 256-bit integer number
   * @return signed 256-bit integer number
   */
  function muli (int128 x, int256 y) internal pure returns (int256) {
    unchecked {
      if (x == MIN_64x64) {
        require (y >= -0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF &&
          y <= 0x1000000000000000000000000000000000000000000000000);
        return -y << 63;
      } else {
        bool negativeResult = false;
        if (x < 0) {
          x = -x;
          negativeResult = true;
        }
        if (y < 0) {
          y = -y; // We rely on overflow behavior here
          negativeResult = !negativeResult;
        }
        uint256 absoluteResult = mulu (x, uint256 (y));
        if (negativeResult) {
          require (absoluteResult <=
            0x8000000000000000000000000000000000000000000000000000000000000000);
          return -int256 (absoluteResult); // We rely on overflow behavior here
        } else {
          require (absoluteResult <=
            0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
          return int256 (absoluteResult);
        }
      }
    }
  }

  /**
   * Calculate x * y rounding down, where x is signed 64.64 fixed point number
   * and y is unsigned 256-bit integer number.  Revert on overflow.
   *
   * @param x signed 64.64 fixed point number
   * @param y unsigned 256-bit integer number
   * @return unsigned 256-bit integer number
   */
  function mulu (int128 x, uint256 y) internal pure returns (uint256) {
    unchecked {
      if (y == 0) return 0;

      require (x >= 0);

      uint256 lo = (uint256 (int256 (x)) * (y & 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)) >> 64;
      uint256 hi = uint256 (int256 (x)) * (y >> 128);

      require (hi <= 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
      hi <<= 64;

      require (hi <=
        0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF - lo);
      return hi + lo;
    }
  }

  /**
   * Calculate x / y rounding towards zero.  Revert on overflow or when y is
   * zero.
   *
   * @param x signed 64.64-bit fixed point number
   * @param y signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function div (int128 x, int128 y) internal pure returns (int128) {
    unchecked {
      require (y != 0);
      int256 result = (int256 (x) << 64) / y;
      require (result >= MIN_64x64 && result <= MAX_64x64);
      return int128 (result);
    }
  }

  /**
   * Calculate x / y rounding towards zero, where x and y are signed 256-bit
   * integer numbers.  Revert on overflow or when y is zero.
   *
   * @param x signed 256-bit integer number
   * @param y signed 256-bit integer number
   * @return signed 64.64-bit fixed point number
   */
  function divi (int256 x, int256 y) internal pure returns (int128) {
    unchecked {
      require (y != 0);

      bool negativeResult = false;
      if (x < 0) {
        x = -x; // We rely on overflow behavior here
        negativeResult = true;
      }
      if (y < 0) {
        y = -y; // We rely on overflow behavior here
        negativeResult = !negativeResult;
      }
      uint128 absoluteResult = divuu (uint256 (x), uint256 (y));
      if (negativeResult) {
        require (absoluteResult <= 0x80000000000000000000000000000000);
        return -int128 (absoluteResult); // We rely on overflow behavior here
      } else {
        require (absoluteResult <= 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
        return int128 (absoluteResult); // We rely on overflow behavior here
      }
    }
  }

  /**
   * Calculate x / y rounding towards zero, where x and y are unsigned 256-bit
   * integer numbers.  Revert on overflow or when y is zero.
   *
   * @param x unsigned 256-bit integer number
   * @param y unsigned 256-bit integer number
   * @return signed 64.64-bit fixed point number
   */
  function divu (uint256 x, uint256 y) internal pure returns (int128) {
    unchecked {
      require (y != 0);
      uint128 result = divuu (x, y);
      require (result <= uint128 (MAX_64x64));
      return int128 (result);
    }
  }

  /**
   * Calculate -x.  Revert on overflow.
   *
   * @param x signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function neg (int128 x) internal pure returns (int128) {
    unchecked {
      require (x != MIN_64x64);
      return -x;
    }
  }

  /**
   * Calculate |x|.  Revert on overflow.
   *
   * @param x signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function abs (int128 x) internal pure returns (int128) {
    unchecked {
      require (x != MIN_64x64);
      return x < 0 ? -x : x;
    }
  }

  /**
   * Calculate 1 / x rounding towards zero.  Revert on overflow or when x is
   * zero.
   *
   * @param x signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function inv (int128 x) internal pure returns (int128) {
    unchecked {
      require (x != 0);
      int256 result = int256 (0x100000000000000000000000000000000) / x;
      require (result >= MIN_64x64 && result <= MAX_64x64);
      return int128 (result);
    }
  }

  /**
   * Calculate arithmetics average of x and y, i.e. (x + y) / 2 rounding down.
   *
   * @param x signed 64.64-bit fixed point number
   * @param y signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function avg (int128 x, int128 y) internal pure returns (int128) {
    unchecked {
      return int128 ((int256 (x) + int256 (y)) >> 1);
    }
  }

  /**
   * Calculate geometric average of x and y, i.e. sqrt (x * y) rounding down.
   * Revert on overflow or in case x * y is negative.
   *
   * @param x signed 64.64-bit fixed point number
   * @param y signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function gavg (int128 x, int128 y) internal pure returns (int128) {
    unchecked {
      int256 m = int256 (x) * int256 (y);
      require (m >= 0);
      require (m <
          0x4000000000000000000000000000000000000000000000000000000000000000);
      return int128 (sqrtu (uint256 (m)));
    }
  }

  /**
   * Calculate x^y assuming 0^0 is 1, where x is signed 64.64 fixed point number
   * and y is unsigned 256-bit integer number.  Revert on overflow.
   *
   * @param x signed 64.64-bit fixed point number
   * @param y uint256 value
   * @return signed 64.64-bit fixed point number
   */
  function pow (int128 x, uint256 y) internal pure returns (int128) {
    unchecked {
      bool negative = x < 0 && y & 1 == 1;

      uint256 absX = uint128 (x < 0 ? -x : x);
      uint256 absResult;
      absResult = 0x100000000000000000000000000000000;

      if (absX <= 0x10000000000000000) {
        absX <<= 63;
        while (y != 0) {
          if (y & 0x1 != 0) {
            absResult = absResult * absX >> 127;
          }
          absX = absX * absX >> 127;

          if (y & 0x2 != 0) {
            absResult = absResult * absX >> 127;
          }
          absX = absX * absX >> 127;

          if (y & 0x4 != 0) {
            absResult = absResult * absX >> 127;
          }
          absX = absX * absX >> 127;

          if (y & 0x8 != 0) {
            absResult = absResult * absX >> 127;
          }
          absX = absX * absX >> 127;

          y >>= 4;
        }

        absResult >>= 64;
      } else {
        uint256 absXShift = 63;
        if (absX < 0x1000000000000000000000000) { absX <<= 32; absXShift -= 32; }
        if (absX < 0x10000000000000000000000000000) { absX <<= 16; absXShift -= 16; }
        if (absX < 0x1000000000000000000000000000000) { absX <<= 8; absXShift -= 8; }
        if (absX < 0x10000000000000000000000000000000) { absX <<= 4; absXShift -= 4; }
        if (absX < 0x40000000000000000000000000000000) { absX <<= 2; absXShift -= 2; }
        if (absX < 0x80000000000000000000000000000000) { absX <<= 1; absXShift -= 1; }

        uint256 resultShift = 0;
        while (y != 0) {
          require (absXShift < 64);

          if (y & 0x1 != 0) {
            absResult = absResult * absX >> 127;
            resultShift += absXShift;
            if (absResult > 0x100000000000000000000000000000000) {
              absResult >>= 1;
              resultShift += 1;
            }
          }
          absX = absX * absX >> 127;
          absXShift <<= 1;
          if (absX >= 0x100000000000000000000000000000000) {
              absX >>= 1;
              absXShift += 1;
          }

          y >>= 1;
        }

        require (resultShift < 64);
        absResult >>= 64 - resultShift;
      }
      int256 result = negative ? -int256 (absResult) : int256 (absResult);
      require (result >= MIN_64x64 && result <= MAX_64x64);
      return int128 (result);
    }
  }

  /**
   * Calculate sqrt (x) rounding down.  Revert if x < 0.
   *
   * @param x signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function sqrt (int128 x) internal pure returns (int128) {
    unchecked {
      require (x >= 0);
      return int128 (sqrtu (uint256 (int256 (x)) << 64));
    }
  }

  /**
   * Calculate binary logarithm of x.  Revert if x <= 0.
   *
   * @param x signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function log_2 (int128 x) internal pure returns (int128) {
    unchecked {
      require (x > 0);

      int256 msb = 0;
      int256 xc = x;
      if (xc >= 0x10000000000000000) { xc >>= 64; msb += 64; }
      if (xc >= 0x100000000) { xc >>= 32; msb += 32; }
      if (xc >= 0x10000) { xc >>= 16; msb += 16; }
      if (xc >= 0x100) { xc >>= 8; msb += 8; }
      if (xc >= 0x10) { xc >>= 4; msb += 4; }
      if (xc >= 0x4) { xc >>= 2; msb += 2; }
      if (xc >= 0x2) msb += 1;  // No need to shift xc anymore

      int256 result = msb - 64 << 64;
      uint256 ux = uint256 (int256 (x)) << uint256 (127 - msb);
      for (int256 bit = 0x8000000000000000; bit > 0; bit >>= 1) {
        ux *= ux;
        uint256 b = ux >> 255;
        ux >>= 127 + b;
        result += bit * int256 (b);
      }

      return int128 (result);
    }
  }

  /**
   * Calculate natural logarithm of x.  Revert if x <= 0.
   *
   * @param x signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function ln (int128 x) internal pure returns (int128) {
    unchecked {
      require (x > 0);

      return int128 (int256 (
          uint256 (int256 (log_2 (x))) * 0xB17217F7D1CF79ABC9E3B39803F2F6AF >> 128));
    }
  }

  /**
   * Calculate binary exponent of x.  Revert on overflow.
   *
   * @param x signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function exp_2 (int128 x) internal pure returns (int128) {
    unchecked {
      require (x < 0x400000000000000000); // Overflow

      if (x < -0x400000000000000000) return 0; // Underflow

      uint256 result = 0x80000000000000000000000000000000;

      if (x & 0x8000000000000000 > 0)
        result = result * 0x16A09E667F3BCC908B2FB1366EA957D3E >> 128;
      if (x & 0x4000000000000000 > 0)
        result = result * 0x1306FE0A31B7152DE8D5A46305C85EDEC >> 128;
      if (x & 0x2000000000000000 > 0)
        result = result * 0x1172B83C7D517ADCDF7C8C50EB14A791F >> 128;
      if (x & 0x1000000000000000 > 0)
        result = result * 0x10B5586CF9890F6298B92B71842A98363 >> 128;
      if (x & 0x800000000000000 > 0)
        result = result * 0x1059B0D31585743AE7C548EB68CA417FD >> 128;
      if (x & 0x400000000000000 > 0)
        result = result * 0x102C9A3E778060EE6F7CACA4F7A29BDE8 >> 128;
      if (x & 0x200000000000000 > 0)
        result = result * 0x10163DA9FB33356D84A66AE336DCDFA3F >> 128;
      if (x & 0x100000000000000 > 0)
        result = result * 0x100B1AFA5ABCBED6129AB13EC11DC9543 >> 128;
      if (x & 0x80000000000000 > 0)
        result = result * 0x10058C86DA1C09EA1FF19D294CF2F679B >> 128;
      if (x & 0x40000000000000 > 0)
        result = result * 0x1002C605E2E8CEC506D21BFC89A23A00F >> 128;
      if (x & 0x20000000000000 > 0)
        result = result * 0x100162F3904051FA128BCA9C55C31E5DF >> 128;
      if (x & 0x10000000000000 > 0)
        result = result * 0x1000B175EFFDC76BA38E31671CA939725 >> 128;
      if (x & 0x8000000000000 > 0)
        result = result * 0x100058BA01FB9F96D6CACD4B180917C3D >> 128;
      if (x & 0x4000000000000 > 0)
        result = result * 0x10002C5CC37DA9491D0985C348C68E7B3 >> 128;
      if (x & 0x2000000000000 > 0)
        result = result * 0x1000162E525EE054754457D5995292026 >> 128;
      if (x & 0x1000000000000 > 0)
        result = result * 0x10000B17255775C040618BF4A4ADE83FC >> 128;
      if (x & 0x800000000000 > 0)
        result = result * 0x1000058B91B5BC9AE2EED81E9B7D4CFAB >> 128;
      if (x & 0x400000000000 > 0)
        result = result * 0x100002C5C89D5EC6CA4D7C8ACC017B7C9 >> 128;
      if (x & 0x200000000000 > 0)
        result = result * 0x10000162E43F4F831060E02D839A9D16D >> 128;
      if (x & 0x100000000000 > 0)
        result = result * 0x100000B1721BCFC99D9F890EA06911763 >> 128;
      if (x & 0x80000000000 > 0)
        result = result * 0x10000058B90CF1E6D97F9CA14DBCC1628 >> 128;
      if (x & 0x40000000000 > 0)
        result = result * 0x1000002C5C863B73F016468F6BAC5CA2B >> 128;
      if (x & 0x20000000000 > 0)
        result = result * 0x100000162E430E5A18F6119E3C02282A5 >> 128;
      if (x & 0x10000000000 > 0)
        result = result * 0x1000000B1721835514B86E6D96EFD1BFE >> 128;
      if (x & 0x8000000000 > 0)
        result = result * 0x100000058B90C0B48C6BE5DF846C5B2EF >> 128;
      if (x & 0x4000000000 > 0)
        result = result * 0x10000002C5C8601CC6B9E94213C72737A >> 128;
      if (x & 0x2000000000 > 0)
        result = result * 0x1000000162E42FFF037DF38AA2B219F06 >> 128;
      if (x & 0x1000000000 > 0)
        result = result * 0x10000000B17217FBA9C739AA5819F44F9 >> 128;
      if (x & 0x800000000 > 0)
        result = result * 0x1000000058B90BFCDEE5ACD3C1CEDC823 >> 128;
      if (x & 0x400000000 > 0)
        result = result * 0x100000002C5C85FE31F35A6A30DA1BE50 >> 128;
      if (x & 0x200000000 > 0)
        result = result * 0x10000000162E42FF0999CE3541B9FFFCF >> 128;
      if (x & 0x100000000 > 0)
        result = result * 0x100000000B17217F80F4EF5AADDA45554 >> 128;
      if (x & 0x80000000 > 0)
        result = result * 0x10000000058B90BFBF8479BD5A81B51AD >> 128;
      if (x & 0x40000000 > 0)
        result = result * 0x1000000002C5C85FDF84BD62AE30A74CC >> 128;
      if (x & 0x20000000 > 0)
        result = result * 0x100000000162E42FEFB2FED257559BDAA >> 128;
      if (x & 0x10000000 > 0)
        result = result * 0x1000000000B17217F7D5A7716BBA4A9AE >> 128;
      if (x & 0x8000000 > 0)
        result = result * 0x100000000058B90BFBE9DDBAC5E109CCE >> 128;
      if (x & 0x4000000 > 0)
        result = result * 0x10000000002C5C85FDF4B15DE6F17EB0D >> 128;
      if (x & 0x2000000 > 0)
        result = result * 0x1000000000162E42FEFA494F1478FDE05 >> 128;
      if (x & 0x1000000 > 0)
        result = result * 0x10000000000B17217F7D20CF927C8E94C >> 128;
      if (x & 0x800000 > 0)
        result = result * 0x1000000000058B90BFBE8F71CB4E4B33D >> 128;
      if (x & 0x400000 > 0)
        result = result * 0x100000000002C5C85FDF477B662B26945 >> 128;
      if (x & 0x200000 > 0)
        result = result * 0x10000000000162E42FEFA3AE53369388C >> 128;
      if (x & 0x100000 > 0)
        result = result * 0x100000000000B17217F7D1D351A389D40 >> 128;
      if (x & 0x80000 > 0)
        result = result * 0x10000000000058B90BFBE8E8B2D3D4EDE >> 128;
      if (x & 0x40000 > 0)
        result = result * 0x1000000000002C5C85FDF4741BEA6E77E >> 128;
      if (x & 0x20000 > 0)
        result = result * 0x100000000000162E42FEFA39FE95583C2 >> 128;
      if (x & 0x10000 > 0)
        result = result * 0x1000000000000B17217F7D1CFB72B45E1 >> 128;
      if (x & 0x8000 > 0)
        result = result * 0x100000000000058B90BFBE8E7CC35C3F0 >> 128;
      if (x & 0x4000 > 0)
        result = result * 0x10000000000002C5C85FDF473E242EA38 >> 128;
      if (x & 0x2000 > 0)
        result = result * 0x1000000000000162E42FEFA39F02B772C >> 128;
      if (x & 0x1000 > 0)
        result = result * 0x10000000000000B17217F7D1CF7D83C1A >> 128;
      if (x & 0x800 > 0)
        result = result * 0x1000000000000058B90BFBE8E7BDCBE2E >> 128;
      if (x & 0x400 > 0)
        result = result * 0x100000000000002C5C85FDF473DEA871F >> 128;
      if (x & 0x200 > 0)
        result = result * 0x10000000000000162E42FEFA39EF44D91 >> 128;
      if (x & 0x100 > 0)
        result = result * 0x100000000000000B17217F7D1CF79E949 >> 128;
      if (x & 0x80 > 0)
        result = result * 0x10000000000000058B90BFBE8E7BCE544 >> 128;
      if (x & 0x40 > 0)
        result = result * 0x1000000000000002C5C85FDF473DE6ECA >> 128;
      if (x & 0x20 > 0)
        result = result * 0x100000000000000162E42FEFA39EF366F >> 128;
      if (x & 0x10 > 0)
        result = result * 0x1000000000000000B17217F7D1CF79AFA >> 128;
      if (x & 0x8 > 0)
        result = result * 0x100000000000000058B90BFBE8E7BCD6D >> 128;
      if (x & 0x4 > 0)
        result = result * 0x10000000000000002C5C85FDF473DE6B2 >> 128;
      if (x & 0x2 > 0)
        result = result * 0x1000000000000000162E42FEFA39EF358 >> 128;
      if (x & 0x1 > 0)
        result = result * 0x10000000000000000B17217F7D1CF79AB >> 128;

      result >>= uint256 (int256 (63 - (x >> 64)));
      require (result <= uint256 (int256 (MAX_64x64)));

      return int128 (int256 (result));
    }
  }

  /**
   * Calculate natural exponent of x.  Revert on overflow.
   *
   * @param x signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */
  function exp (int128 x) internal pure returns (int128) {
    unchecked {
      require (x < 0x400000000000000000); // Overflow

      if (x < -0x400000000000000000) return 0; // Underflow

      return exp_2 (
          int128 (int256 (x) * 0x171547652B82FE1777D0FFDA0D23A7D12 >> 128));
    }
  }

  /**
   * Calculate x / y rounding towards zero, where x and y are unsigned 256-bit
   * integer numbers.  Revert on overflow or when y is zero.
   *
   * @param x unsigned 256-bit integer number
   * @param y unsigned 256-bit integer number
   * @return unsigned 64.64-bit fixed point number
   */
  function divuu (uint256 x, uint256 y) private pure returns (uint128) {
    unchecked {
      require (y != 0);

      uint256 result;

      if (x <= 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
        result = (x << 64) / y;
      else {
        uint256 msb = 192;
        uint256 xc = x >> 192;
        if (xc >= 0x100000000) { xc >>= 32; msb += 32; }
        if (xc >= 0x10000) { xc >>= 16; msb += 16; }
        if (xc >= 0x100) { xc >>= 8; msb += 8; }
        if (xc >= 0x10) { xc >>= 4; msb += 4; }
        if (xc >= 0x4) { xc >>= 2; msb += 2; }
        if (xc >= 0x2) msb += 1;  // No need to shift xc anymore

        result = (x << 255 - msb) / ((y - 1 >> msb - 191) + 1);
        require (result <= 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);

        uint256 hi = result * (y >> 128);
        uint256 lo = result * (y & 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);

        uint256 xh = x >> 192;
        uint256 xl = x << 64;

        if (xl < lo) xh -= 1;
        xl -= lo; // We rely on overflow behavior here
        lo = hi << 128;
        if (xl < lo) xh -= 1;
        xl -= lo; // We rely on overflow behavior here

        assert (xh == hi >> 128);

        result += xl / y;
      }

      require (result <= 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
      return uint128 (result);
    }
  }

  /**
   * Calculate sqrt (x) rounding down, where x is unsigned 256-bit integer
   * number.
   *
   * @param x unsigned 256-bit integer number
   * @return unsigned 128-bit integer number
   */
  function sqrtu (uint256 x) private pure returns (uint128) {
    unchecked {
      if (x == 0) return 0;
      else {
        uint256 xx = x;
        uint256 r = 1;
        if (xx >= 0x100000000000000000000000000000000) { xx >>= 128; r <<= 64; }
        if (xx >= 0x10000000000000000) { xx >>= 64; r <<= 32; }
        if (xx >= 0x100000000) { xx >>= 32; r <<= 16; }
        if (xx >= 0x10000) { xx >>= 16; r <<= 8; }
        if (xx >= 0x100) { xx >>= 8; r <<= 4; }
        if (xx >= 0x10) { xx >>= 4; r <<= 2; }
        if (xx >= 0x8) { r <<= 1; }
        r = (r + x / r) >> 1;
        r = (r + x / r) >> 1;
        r = (r + x / r) >> 1;
        r = (r + x / r) >> 1;
        r = (r + x / r) >> 1;
        r = (r + x / r) >> 1;
        r = (r + x / r) >> 1; // Seven iterations should be enough
        uint256 r1 = x / r;
        return uint128 (r < r1 ? r : r1);
      }
    }
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

/// @title Contains 512-bit math functions
/// @notice Facilitates multiplication and division that can have overflow of an intermediate value without any loss of precision
/// @dev Handles "phantom overflow" i.e., allows multiplication and division where an intermediate value overflows 256 bits
library FullMath {
    /// @notice Calculates floor(a×b÷denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
    /// @param a The multiplicand
    /// @param b The multiplier
    /// @param denominator The divisor
    /// @return result The 256-bit result
    /// @dev Credit to Remco Bloemen under MIT license https://xn--2-umb.com/21/muldiv
    function mulDiv(
        uint256 a,
        uint256 b,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        // 512-bit multiply [prod1 prod0] = a * b
        // Compute the product mod 2**256 and mod 2**256 - 1
        // then use the Chinese Remainder Theorem to reconstruct
        // the 512 bit result. The result is stored in two 256
        // variables such that product = prod1 * 2**256 + prod0
        uint256 prod0; // Least significant 256 bits of the product
        uint256 prod1; // Most significant 256 bits of the product
        assembly {
            let mm := mulmod(a, b, not(0))
            prod0 := mul(a, b)
            prod1 := sub(sub(mm, prod0), lt(mm, prod0))
        }

        // Handle non-overflow cases, 256 by 256 division
        if (prod1 == 0) {
            require(denominator > 0);
            assembly {
                result := div(prod0, denominator)
            }
            return result;
        }

        // Make sure the result is less than 2**256.
        // Also prevents denominator == 0
        require(denominator > prod1);

        ///////////////////////////////////////////////
        // 512 by 256 division.
        ///////////////////////////////////////////////

        // Make division exact by subtracting the remainder from [prod1 prod0]
        // Compute remainder using mulmod
        uint256 remainder;
        assembly {
            remainder := mulmod(a, b, denominator)
        }
        // Subtract 256 bit number from 512 bit number
        assembly {
            prod1 := sub(prod1, gt(remainder, prod0))
            prod0 := sub(prod0, remainder)
        }

        // Factor powers of two out of denominator
        // Compute largest power of two divisor of denominator.
        // Always >= 1.
        uint256 twos = denominator & (~denominator + 1);
        // Divide denominator by power of two
        assembly {
            denominator := div(denominator, twos)
        }

        // Divide [prod1 prod0] by the factors of two
        assembly {
            prod0 := div(prod0, twos)
        }
        // Shift in bits from prod1 into prod0. For this we need
        // to flip `twos` such that it is 2**256 / twos.
        // If twos is zero, then it becomes one
        assembly {
            twos := add(div(sub(0, twos), twos), 1)
        }
        prod0 |= prod1 * twos;

        // Invert denominator mod 2**256
        // Now that denominator is an odd number, it has an inverse
        // modulo 2**256 such that denominator * inv = 1 mod 2**256.
        // Compute the inverse by starting with a seed that is correct
        // correct for four bits. That is, denominator * inv = 1 mod 2**4
        uint256 inv = (3 * denominator) ^ 2;
        // Now use Newton-Raphson iteration to improve the precision.
        // Thanks to Hensel's lifting lemma, this also works in modular
        // arithmetic, doubling the correct bits in each step.
        inv *= 2 - denominator * inv; // inverse mod 2**8
        inv *= 2 - denominator * inv; // inverse mod 2**16
        inv *= 2 - denominator * inv; // inverse mod 2**32
        inv *= 2 - denominator * inv; // inverse mod 2**64
        inv *= 2 - denominator * inv; // inverse mod 2**128
        inv *= 2 - denominator * inv; // inverse mod 2**256

        // Because the division is now exact we can divide by multiplying
        // with the modular inverse of denominator. This will give us the
        // correct result modulo 2**256. Since the precoditions guarantee
        // that the outcome is less than 2**256, this is the final result.
        // We don't need to compute the high bits of the result and prod1
        // is no longer required.
        result = prod0 * inv;
        return result;
    }

    /// @notice Calculates ceil(a×b÷denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
    /// @param a The multiplicand
    /// @param b The multiplier
    /// @param denominator The divisor
    /// @return result The 256-bit result
    function mulDivRoundingUp(
        uint256 a,
        uint256 b,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        result = mulDiv(a, b, denominator);
        if (mulmod(a, b, denominator) > 0) {
            require(result < type(uint256).max);
            result++;
        }
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.13;

/// @title Prevents delegatecall to a contract
/// @notice Base contract that provides a modifier for preventing delegatecall to methods in a child contract
abstract contract NoDelegateCall {
    /// @dev The original address of this contract
    address private immutable original;

    constructor() {
        // Immutables are computed in the init code of the contract, and then inlined into the deployed bytecode.
        // In other words, this variable won't change when it's checked at runtime.
        original = address(this);
    }

    /// @dev Private method is used instead of inlining into modifier because modifiers are copied into each method,
    ///     and the use of immutable means the address bytes are copied in every place the modifier is used.
    function checkNotDelegateCall() private view {
        require(address(this) == original);
    }

    /// @notice Prevents delegatecall into the modified method
    modifier noDelegateCall() {
        checkNotDelegateCall();
        _;
    }
}

// SPDX-License-Identifier: MIT

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.8.13;

import "../lib/openzeppelin-contracts/contracts/token/ERC20/ERC20.sol";
import "../lib/openzeppelin-contracts/contracts/token/ERC20/utils/SafeERC20.sol";

import "./lib/ABDKMath64x64.sol";

import "./Storage.sol";

import "./CurveMath.sol";

library Orchestrator {
    using SafeERC20 for IERC20;
    using ABDKMath64x64 for int128;
    using ABDKMath64x64 for uint256;

    int128 private constant ONE_WEI = 0x12;

    event ParametersSet(uint256 alpha, uint256 beta, uint256 delta, uint256 epsilon, uint256 lambda);

    event AssetIncluded(address indexed numeraire, address indexed reserve, uint256 weight);

    event AssimilatorIncluded(
        address indexed derivative,
        address indexed numeraire,
        address indexed reserve,
        address assimilator
    );

    function setParams(
        Storage.Curve storage curve,
        uint256 _alpha,
        uint256 _beta,
        uint256 _feeAtHalt,
        uint256 _epsilon,
        uint256 _lambda
    ) external {
        require(0 < _alpha && _alpha < 1e18, "Curve/parameter-invalid-alpha");

        require(_beta < _alpha, "Curve/parameter-invalid-beta");

        require(_feeAtHalt <= 5e17, "Curve/parameter-invalid-max");

        require(_epsilon <= 1e16, "Curve/parameter-invalid-epsilon");

        require(_lambda <= 1e18, "Curve/parameter-invalid-lambda");

        int128 _omega = getFee(curve);

        curve.alpha = (_alpha + 1).divu(1e18);

        curve.beta = (_beta + 1).divu(1e18);

        curve.delta = (_feeAtHalt).divu(1e18).div(uint256(2).fromUInt().mul(curve.alpha.sub(curve.beta))) + ONE_WEI;

        curve.epsilon = (_epsilon + 1).divu(1e18);

        curve.lambda = (_lambda + 1).divu(1e18);

        int128 _psi = getFee(curve);

        require(_omega >= _psi, "Curve/parameters-increase-fee");

        emit ParametersSet(_alpha, _beta, curve.delta.mulu(1e18), _epsilon, _lambda);
    }

    function getFee(Storage.Curve storage curve) private view returns (int128 fee_) {
        int128 _gLiq;

        // Always pairs
        int128[] memory _bals = new int128[](2);

        for (uint256 i = 0; i < _bals.length; i++) {
            int128 _bal = Assimilators.viewNumeraireBalance(curve.assets[i].addr);

            _bals[i] = _bal;

            _gLiq += _bal;
        }

        fee_ = CurveMath.calculateFee(_gLiq, _bals, curve.beta, curve.delta, curve.weights);
    }

    function initialize(
        Storage.Curve storage curve,
        address[] storage numeraires,
        address[] storage reserves,
        address[] storage derivatives,
        address[] calldata _assets,
        uint256[] calldata _assetWeights
    ) external {
        require(_assetWeights.length == 2, "Curve/assetWeights-must-be-length-two");
        require(_assets.length % 5 == 0, "Curve/assets-must-be-divisible-by-five");

        for (uint256 i = 0; i < _assetWeights.length; i++) {
            uint256 ix = i * 5;

            numeraires.push(_assets[ix]);
            derivatives.push(_assets[ix]);

            reserves.push(_assets[2 + ix]);
            if (_assets[ix] != _assets[2 + ix]) derivatives.push(_assets[2 + ix]);

            includeAsset(
                curve,
                _assets[ix], // numeraire
                _assets[1 + ix], // numeraire assimilator
                _assets[2 + ix], // reserve
                _assets[3 + ix], // reserve assimilator
                _assets[4 + ix], // reserve approve to
                _assetWeights[i]
            );
        }
    }

    function includeAsset(
        Storage.Curve storage curve,
        address _numeraire,
        address _numeraireAssim,
        address _reserve,
        address _reserveAssim,
        address _reserveApproveTo,
        uint256 _weight
    ) private {
        require(_numeraire != address(0), "Curve/numeraire-cannot-be-zeroth-address");

        require(_numeraireAssim != address(0), "Curve/numeraire-assimilator-cannot-be-zeroth-address");

        require(_reserve != address(0), "Curve/reserve-cannot-be-zeroth-address");

        require(_reserveAssim != address(0), "Curve/reserve-assimilator-cannot-be-zeroth-address");

        require(_weight < 1e18, "Curve/weight-must-be-less-than-one");

        if (_numeraire != _reserve) IERC20(_numeraire).safeApprove(_reserveApproveTo, type(uint).max);

        Storage.Assimilator storage _numeraireAssimilator = curve.assimilators[_numeraire];

        _numeraireAssimilator.addr = _numeraireAssim;

        _numeraireAssimilator.ix = uint8(curve.assets.length);

        Storage.Assimilator storage _reserveAssimilator = curve.assimilators[_reserve];

        _reserveAssimilator.addr = _reserveAssim;

        _reserveAssimilator.ix = uint8(curve.assets.length);

        int128 __weight = _weight.divu(1e18).add(uint256(1).divu(1e18));

        curve.weights.push(__weight);

        curve.assets.push(_numeraireAssimilator);

        emit AssetIncluded(_numeraire, _reserve, _weight);

        emit AssimilatorIncluded(_numeraire, _numeraire, _reserve, _numeraireAssim);

        if (_numeraireAssim != _reserveAssim) {
            emit AssimilatorIncluded(_reserve, _numeraire, _reserve, _reserveAssim);
        }
    }

    function viewCurve(Storage.Curve storage curve)
        external
        view
        returns (
            uint256 alpha_,
            uint256 beta_,
            uint256 delta_,
            uint256 epsilon_,
            uint256 lambda_
        )
    {
        alpha_ = curve.alpha.mulu(1e18);

        beta_ = curve.beta.mulu(1e18);

        delta_ = curve.delta.mulu(1e18);

        epsilon_ = curve.epsilon.mulu(1e18);

        lambda_ = curve.lambda.mulu(1e18);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.13;

import "./Assimilators.sol";

import "./Storage.sol";

import "./lib/UnsafeMath64x64.sol";
import "./lib/ABDKMath64x64.sol";

import "./CurveMath.sol";

library ProportionalLiquidity {
    using ABDKMath64x64 for uint256;
    using ABDKMath64x64 for int128;
    using UnsafeMath64x64 for int128;

    event Transfer(address indexed from, address indexed to, uint256 value);

    int128 public constant ONE = 0x10000000000000000;
    int128 public constant ONE_WEI = 0x12;

    function proportionalDeposit(Storage.Curve storage curve, uint256 _deposit)
        external
        returns (uint256 curves_, uint256[] memory)
    {
        int128 __deposit = _deposit.divu(1e18);

        uint256 _length = curve.assets.length;

        uint256[] memory deposits_ = new uint256[](_length);

        (int128 _oGLiq, int128[] memory _oBals) = getGrossLiquidityAndBalancesForDeposit(curve);

        // Needed to calculate liquidity invariant
        // (int128 _oGLiqProp, int128[] memory _oBalsProp) = getGrossLiquidityAndBalances(curve);

        // No liquidity, oracle sets the ratio
        if (_oGLiq == 0) {
            for (uint256 i = 0; i < _length; i++) {
                // Variable here to avoid stack-too-deep errors
                int128 _d = __deposit.mul(curve.weights[i]);
                deposits_[i] = Assimilators.intakeNumeraire(curve.assets[i].addr, _d.add(ONE_WEI));
            }
        } else {
            // We already have an existing pool ratio
            // which must be respected
            int128 _multiplier = __deposit.div(_oGLiq);

            uint256 _baseWeight = curve.weights[0].mulu(1e18);
            uint256 _quoteWeight = curve.weights[1].mulu(1e18);

            for (uint256 i = 0; i < _length; i++) {
                deposits_[i] = Assimilators.intakeNumeraireLPRatio(
                    curve.assets[i].addr,
                    _baseWeight,
                    _quoteWeight,
                    _oBals[i].mul(_multiplier).add(ONE_WEI)
                );
            }
        }

        int128 _totalShells = curve.totalSupply.divu(1e18);

        int128 _newShells = __deposit;

        if (_totalShells > 0) {
            _newShells = __deposit.mul(_totalShells);
            _newShells = _newShells.div(_oGLiq);
        }

        mint(curve, msg.sender, curves_ = _newShells.mulu(1e18));

        return (curves_, deposits_);
    }

    function viewProportionalDeposit(Storage.Curve storage curve, uint256 _deposit)
        external
        view
        returns (uint256 curves_, uint256[] memory)
    {
        int128 __deposit = _deposit.divu(1e18);

        uint256 _length = curve.assets.length;

        (int128 _oGLiq, int128[] memory _oBals) = getGrossLiquidityAndBalancesForDeposit(curve);

        uint256[] memory deposits_ = new uint256[](_length);

        // No liquidity
        if (_oGLiq == 0) {
            for (uint256 i = 0; i < _length; i++) {
                deposits_[i] = Assimilators.viewRawAmount(
                    curve.assets[i].addr,
                    __deposit.mul(curve.weights[i]).add(ONE_WEI)
                );
            }
        } else {
            // We already have an existing pool ratio
            // this must be respected
            int128 _multiplier = __deposit.div(_oGLiq);

            uint256 _baseWeight = curve.weights[0].mulu(1e18);
            uint256 _quoteWeight = curve.weights[1].mulu(1e18);

            // Deposits into the pool is determined by existing LP ratio
            for (uint256 i = 0; i < _length; i++) {
                deposits_[i] = Assimilators.viewRawAmountLPRatio(
                    curve.assets[i].addr,
                    _baseWeight,
                    _quoteWeight,
                    _oBals[i].mul(_multiplier).add(ONE_WEI)
                );
            }
        }

        int128 _totalShells = curve.totalSupply.divu(1e18);

        int128 _newShells = __deposit;

        if (_totalShells > 0) {
            _newShells = __deposit.mul(_totalShells);
            _newShells = _newShells.div(_oGLiq);
        }

        curves_ = _newShells.mulu(1e18);

        return (curves_, deposits_);
    }

    function proportionalWithdraw(Storage.Curve storage curve, uint256 _withdrawal)
        external
        returns (uint256[] memory)
    {
        uint256 _length = curve.assets.length;

        (, int128[] memory _oBals) = getGrossLiquidityAndBalances(curve);

        uint256[] memory withdrawals_ = new uint256[](_length);

        int128 _totalShells = curve.totalSupply.divu(1e18);
        int128 __withdrawal = _withdrawal.divu(1e18);

        int128 _multiplier = __withdrawal.div(_totalShells);

        for (uint256 i = 0; i < _length; i++) {
            withdrawals_[i] = Assimilators.outputNumeraire(
                curve.assets[i].addr,
                msg.sender,
                _oBals[i].mul(_multiplier)
            );
        }

        burn(curve, msg.sender, _withdrawal);

        return withdrawals_;
    }

    function viewProportionalWithdraw(Storage.Curve storage curve, uint256 _withdrawal)
        external
        view
        returns (uint256[] memory)
    {
        uint256 _length = curve.assets.length;

        (, int128[] memory _oBals) = getGrossLiquidityAndBalances(curve);

        uint256[] memory withdrawals_ = new uint256[](_length);

        int128 _multiplier = _withdrawal.divu(1e18).div(curve.totalSupply.divu(1e18));

        for (uint256 i = 0; i < _length; i++) {
            withdrawals_[i] = Assimilators.viewRawAmount(curve.assets[i].addr, _oBals[i].mul(_multiplier));
        }

        return withdrawals_;
    }

    function getGrossLiquidityAndBalancesForDeposit(Storage.Curve storage curve)
        internal
        view
        returns (int128 grossLiquidity_, int128[] memory)
    {
        uint256 _length = curve.assets.length;

        int128[] memory balances_ = new int128[](_length);
        uint256 _baseWeight = curve.weights[0].mulu(1e18);
        uint256 _quoteWeight = curve.weights[1].mulu(1e18);

        for (uint256 i = 0; i < _length; i++) {
            int128 _bal = Assimilators.viewNumeraireBalanceLPRatio(_baseWeight, _quoteWeight, curve.assets[i].addr);

            balances_[i] = _bal;
            grossLiquidity_ += _bal;
        }

        return (grossLiquidity_, balances_);
    }

    function getGrossLiquidityAndBalances(Storage.Curve storage curve)
        internal
        view
        returns (int128 grossLiquidity_, int128[] memory)
    {
        uint256 _length = curve.assets.length;

        int128[] memory balances_ = new int128[](_length);

        for (uint256 i = 0; i < _length; i++) {
            int128 _bal = Assimilators.viewNumeraireBalance(curve.assets[i].addr);

            balances_[i] = _bal;
            grossLiquidity_ += _bal;
        }

        return (grossLiquidity_, balances_);
    }

    function burn(
        Storage.Curve storage curve,
        address account,
        uint256 amount
    ) private {
        curve.balances[account] = burnSub(curve.balances[account], amount);

        curve.totalSupply = burnSub(curve.totalSupply, amount);

        emit Transfer(msg.sender, address(0), amount);
    }

    function mint(
        Storage.Curve storage curve,
        address account,
        uint256 amount
    ) private {
        curve.totalSupply = mintAdd(curve.totalSupply, amount);

        curve.balances[account] = mintAdd(curve.balances[account], amount);

        emit Transfer(address(0), msg.sender, amount);
    }

    function mintAdd(uint256 x, uint256 y) private pure returns (uint256 z) {
        require((z = x + y) >= x, "Curve/mint-overflow");
    }

    function burnSub(uint256 x, uint256 y) private pure returns (uint256 z) {
        require((z = x - y) <= x, "Curve/burn-underflow");
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.13;
pragma experimental ABIEncoderV2;

import "./Assimilators.sol";
import "./Storage.sol";
import "./CurveMath.sol";
import "./lib/UnsafeMath64x64.sol";
import "./lib/ABDKMath64x64.sol";

import "../lib/openzeppelin-contracts/contracts/utils/math/SafeMath.sol";
import "../lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol";

import "./CurveFactory.sol";
import "./Structs.sol";

library Swaps {
    using ABDKMath64x64 for int128;
    using ABDKMath64x64 for int256;
    using UnsafeMath64x64 for int128;
    using ABDKMath64x64 for uint256;
    using SafeMath for uint256;

    event Trade(
        address indexed trader,
        address indexed origin,
        address indexed target,
        uint256 originAmount,
        uint256 targetAmount
    );

    int128 public constant ONE = 0x10000000000000000;

    function getOriginAndTarget(
        Storage.Curve storage curve,
        address _o,
        address _t
    ) private view returns (Storage.Assimilator memory, Storage.Assimilator memory) {
        Storage.Assimilator memory o_ = curve.assimilators[_o];
        Storage.Assimilator memory t_ = curve.assimilators[_t];

        require(o_.addr != address(0), "Curve/origin-not-supported");
        require(t_.addr != address(0), "Curve/target-not-supported");

        return (o_, t_);
    }

    function originSwap(Storage.Curve storage curve, OriginSwapData memory _swapData)
        external
        returns (
            uint256 tAmt_
        )
    {
        (Storage.Assimilator memory _o, Storage.Assimilator memory _t) =
            getOriginAndTarget(curve, _swapData._origin, _swapData._target);

        if (_o.ix == _t.ix)
            return
                Assimilators.outputNumeraire(
                    _t.addr,
                    _swapData._recipient,
                    Assimilators.intakeRaw(_o.addr, _swapData._originAmount)
                );

        SwapInfo memory _swapInfo;
        (int128 _amt, int128 _oGLiq, int128 _nGLiq, int128[] memory _oBals, int128[] memory _nBals) =
            getOriginSwapData(curve, _o.ix, _t.ix, _o.addr, _swapData._originAmount);

        _swapInfo.totalAmount = _amt;

        _amt = CurveMath.calculateTrade(curve, _oGLiq, _nGLiq, _oBals, _nBals, _amt, _t.ix);

        _swapInfo.curveFactory = ICurveFactory(_swapData._curveFactory);
        _swapInfo.amountToUser = _amt.us_mul(ONE - curve.epsilon);
        _swapInfo.totalFee = _swapInfo.totalAmount + _swapInfo.amountToUser;
        _swapInfo.protocolFeePercentage = _swapInfo.curveFactory.getProtocolFee();
        _swapInfo.treasury = _swapInfo.curveFactory.getProtocolTreasury();
        _swapInfo.amountToTreasury = _swapInfo.totalFee.muli(_swapInfo.protocolFeePercentage).divi(100000);
        Assimilators.transferFee(_t.addr, _swapInfo.amountToTreasury, _swapInfo.treasury);
        tAmt_ = Assimilators.outputNumeraire(_t.addr, _swapData._recipient, _swapInfo.amountToUser);

        emit Trade(msg.sender, _swapData._origin, _swapData._target, _swapData._originAmount, tAmt_);
    }

    function viewOriginSwap(
        Storage.Curve storage curve,
        address _origin,
        address _target,
        uint256 _originAmount
    ) external view returns (uint256 tAmt_) {
        (Storage.Assimilator memory _o, Storage.Assimilator memory _t) = getOriginAndTarget(curve, _origin, _target);

        if (_o.ix == _t.ix)
            return Assimilators.viewRawAmount(_t.addr, Assimilators.viewNumeraireAmount(_o.addr, _originAmount));

        (int128 _amt, int128 _oGLiq, int128 _nGLiq, int128[] memory _nBals, int128[] memory _oBals) =
            viewOriginSwapData(curve, _o.ix, _t.ix, _originAmount, _o.addr);

        _amt = CurveMath.calculateTrade(curve, _oGLiq, _nGLiq, _oBals, _nBals, _amt, _t.ix);

        _amt = _amt.us_mul(ONE - curve.epsilon);

        tAmt_ = Assimilators.viewRawAmount(_t.addr, _amt.abs());
    }

    function targetSwap(Storage.Curve storage curve, TargetSwapData memory _swapData)
        external
        returns (
            uint256 oAmt_
        )
    {
        (Storage.Assimilator memory _o, Storage.Assimilator memory _t) =
            getOriginAndTarget(curve, _swapData._origin, _swapData._target);

        if (_o.ix == _t.ix)
            return
                Assimilators.intakeNumeraire(
                    _o.addr,
                    Assimilators.outputRaw(_t.addr, _swapData._recipient, _swapData._targetAmount)
                );

        // If the origin is the quote currency (i.e. usdc)
        // we need to make sure to massage the _targetAmount
        // by dividing it by the exchange rate (so it gets
        // multiplied later to reach the same target amount).
        // Inelegant solution, but this way we don't need to
        // re-write large chunks of the code-base

        // curve.assets[1].addr = quoteCurrency
        // no variable assignment due to stack too deep
        if (curve.assets[1].addr == _o.addr) {
            _swapData._targetAmount = _swapData._targetAmount.mul(1e8).div(Assimilators.getRate(_t.addr));
        }
        (int128 _amt, int128 _oGLiq, int128 _nGLiq, int128[] memory _oBals, int128[] memory _nBals) =
            getTargetSwapData(curve, _t.ix, _o.ix, _t.addr, _swapData._recipient, _swapData._targetAmount);

        _amt = CurveMath.calculateTrade(curve, _oGLiq, _nGLiq, _oBals, _nBals, _amt, _o.ix);

        // If the origin is the quote currency (i.e. usdc)
        // we need to make sure to massage the _amt too

        // curve.assets[1].addr = quoteCurrency
        if (curve.assets[1].addr == _o.addr) {
            _amt = _amt.mul(Assimilators.getRate(_t.addr).divu(1e8));
        }

        SwapInfo memory _swapInfo;

        _swapInfo.totalAmount = _amt;
        _swapInfo.curveFactory = ICurveFactory(_swapData._curveFactory);
        _swapInfo.amountToUser = _amt.us_mul(ONE + curve.epsilon);
        _swapInfo.totalFee = _swapInfo.amountToUser - _amt;
        _swapInfo.protocolFeePercentage = _swapInfo.curveFactory.getProtocolFee();
        _swapInfo.treasury = _swapInfo.curveFactory.getProtocolTreasury();
        _swapInfo.amountToTreasury = _swapInfo.totalFee.muli(_swapInfo.protocolFeePercentage).divi(100000);

        Assimilators.transferFee(_o.addr, _swapInfo.amountToTreasury, _swapInfo.treasury);

        oAmt_ = Assimilators.intakeNumeraire(_o.addr, _swapInfo.amountToUser);

        emit Trade(msg.sender, _swapData._origin, _swapData._target, oAmt_, _swapData._targetAmount);
    }

    function viewTargetSwap(
        Storage.Curve storage curve,
        address _origin,
        address _target,
        uint256 _targetAmount
    ) external view returns (uint256 oAmt_) {
        (Storage.Assimilator memory _o, Storage.Assimilator memory _t) = getOriginAndTarget(curve, _origin, _target);

        if (_o.ix == _t.ix)
            return Assimilators.viewRawAmount(_o.addr, Assimilators.viewNumeraireAmount(_t.addr, _targetAmount));

        // If the origin is the quote currency (i.e. usdc)
        // we need to make sure to massage the _targetAmount
        // by dividing it by the exchange rate (so it gets
        // multiplied later to reach the same target amount).
        // Inelegant solution, but this way we don't need to
        // re-write large chunks of the code-base

        // curve.assets[1].addr = quoteCurrency
        // no variable assignment due to stack too deep
        if (curve.assets[1].addr == _o.addr) {
            _targetAmount = _targetAmount.mul(1e8).div(Assimilators.getRate(_t.addr));
        }

        (int128 _amt, int128 _oGLiq, int128 _nGLiq, int128[] memory _nBals, int128[] memory _oBals) =
            viewTargetSwapData(curve, _t.ix, _o.ix, _targetAmount, _t.addr);

        _amt = CurveMath.calculateTrade(curve, _oGLiq, _nGLiq, _oBals, _nBals, _amt, _o.ix);

        // If the origin is the quote currency (i.e. usdc)
        // we need to make sure to massage the _amt too

        // curve.assets[1].addr = quoteCurrency
        if (curve.assets[1].addr == _o.addr) {
            _amt = _amt.mul(Assimilators.getRate(_t.addr).divu(1e8));
        }

        _amt = _amt.us_mul(ONE + curve.epsilon);

        oAmt_ = Assimilators.viewRawAmount(_o.addr, _amt);
    }

    function getOriginSwapData(
        Storage.Curve storage curve,
        uint256 _inputIx,
        uint256 _outputIx,
        address _assim,
        uint256 _amt
    )
        private
        returns (
            int128 amt_,
            int128 oGLiq_,
            int128 nGLiq_,
            int128[] memory,
            int128[] memory
        )
    {
        uint256 _length = curve.assets.length;

        int128[] memory oBals_ = new int128[](_length);
        int128[] memory nBals_ = new int128[](_length);
        Storage.Assimilator[] memory _reserves = curve.assets;

        for (uint256 i = 0; i < _length; i++) {
            if (i != _inputIx) nBals_[i] = oBals_[i] = Assimilators.viewNumeraireBalance(_reserves[i].addr);
            else {
                int128 _bal;
                (amt_, _bal) = Assimilators.intakeRawAndGetBalance(_assim, _amt);

                oBals_[i] = _bal.sub(amt_);
                nBals_[i] = _bal;
            }

            oGLiq_ += oBals_[i];
            nGLiq_ += nBals_[i];
        }

        nGLiq_ = nGLiq_.sub(amt_);
        nBals_[_outputIx] = ABDKMath64x64.sub(nBals_[_outputIx], amt_);

        return (amt_, oGLiq_, nGLiq_, oBals_, nBals_);
    }

    function getTargetSwapData(
        Storage.Curve storage curve,
        uint256 _inputIx,
        uint256 _outputIx,
        address _assim,
        address _recipient,
        uint256 _amt
    )
        private
        returns (
            int128 amt_,
            int128 oGLiq_,
            int128 nGLiq_,
            int128[] memory,
            int128[] memory
        )
    {
        uint256 _length = curve.assets.length;

        int128[] memory oBals_ = new int128[](_length);
        int128[] memory nBals_ = new int128[](_length);
        Storage.Assimilator[] memory _reserves = curve.assets;

        for (uint256 i = 0; i < _length; i++) {
            if (i != _inputIx) nBals_[i] = oBals_[i] = Assimilators.viewNumeraireBalance(_reserves[i].addr);
            else {
                int128 _bal;
                (amt_, _bal) = Assimilators.outputRawAndGetBalance(_assim, _recipient, _amt);

                oBals_[i] = _bal.sub(amt_);
                nBals_[i] = _bal;
            }

            oGLiq_ += oBals_[i];
            nGLiq_ += nBals_[i];
        }

        nGLiq_ = nGLiq_.sub(amt_);
        nBals_[_outputIx] = ABDKMath64x64.sub(nBals_[_outputIx], amt_);

        return (amt_, oGLiq_, nGLiq_, oBals_, nBals_);
    }

    function viewOriginSwapData(
        Storage.Curve storage curve,
        uint256 _inputIx,
        uint256 _outputIx,
        uint256 _amt,
        address _assim
    )
        private
        view
        returns (
            int128 amt_,
            int128 oGLiq_,
            int128 nGLiq_,
            int128[] memory,
            int128[] memory
        )
    {
        uint256 _length = curve.assets.length;
        int128[] memory nBals_ = new int128[](_length);
        int128[] memory oBals_ = new int128[](_length);

        for (uint256 i = 0; i < _length; i++) {
            if (i != _inputIx) nBals_[i] = oBals_[i] = Assimilators.viewNumeraireBalance(curve.assets[i].addr);
            else {
                int128 _bal;
                (amt_, _bal) = Assimilators.viewNumeraireAmountAndBalance(_assim, _amt);

                oBals_[i] = _bal;
                nBals_[i] = _bal.add(amt_);
            }

            oGLiq_ += oBals_[i];
            nGLiq_ += nBals_[i];
        }

        nGLiq_ = nGLiq_.sub(amt_);
        nBals_[_outputIx] = ABDKMath64x64.sub(nBals_[_outputIx], amt_);

        return (amt_, oGLiq_, nGLiq_, nBals_, oBals_);
    }

    function viewTargetSwapData(
        Storage.Curve storage curve,
        uint256 _inputIx,
        uint256 _outputIx,
        uint256 _amt,
        address _assim
    )
        private
        view
        returns (
            int128 amt_,
            int128 oGLiq_,
            int128 nGLiq_,
            int128[] memory,
            int128[] memory
        )
    {
        uint256 _length = curve.assets.length;
        int128[] memory nBals_ = new int128[](_length);
        int128[] memory oBals_ = new int128[](_length);

        for (uint256 i = 0; i < _length; i++) {
            if (i != _inputIx) nBals_[i] = oBals_[i] = Assimilators.viewNumeraireBalance(curve.assets[i].addr);
            else {
                int128 _bal;
                (amt_, _bal) = Assimilators.viewNumeraireAmountAndBalance(_assim, _amt);
                amt_ = amt_.neg();

                oBals_[i] = _bal;
                nBals_[i] = _bal.add(amt_);
            }

            oGLiq_ += oBals_[i];
            nGLiq_ += nBals_[i];
        }

        nGLiq_ = nGLiq_.sub(amt_);
        nBals_[_outputIx] = ABDKMath64x64.sub(nBals_[_outputIx], amt_);

        return (amt_, oGLiq_, nGLiq_, nBals_, oBals_);
    }
}

// SPDX-License-Identifier: MIT

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.8.13;

import "./Storage.sol";

import "./Assimilators.sol";

import "./lib/ABDKMath64x64.sol";

library ViewLiquidity {
    using ABDKMath64x64 for int128;

    function viewLiquidity(Storage.Curve storage curve)
        external
        view
        returns (uint256 total_, uint256[] memory individual_)
    {
        uint256 _length = curve.assets.length;

        individual_ = new uint256[](_length);

        for (uint256 i = 0; i < _length; i++) {
            uint256 _liquidity = Assimilators.viewNumeraireBalance(curve.assets[i].addr).mulu(1e18);

            total_ += _liquidity;
            individual_[i] = _liquidity;
        }

        return (total_, individual_);
    }
}

// SPDX-License-Identifier: MIT

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.8.13;

import "./interfaces/IOracle.sol";
import "./Assimilators.sol";

contract Storage {
    struct Curve {
        // Curve parameters
        int128 alpha;
        int128 beta;
        int128 delta;
        int128 epsilon;
        int128 lambda;
        int128[] weights;
        // Assets and their assimilators
        Assimilator[] assets;
        mapping(address => Assimilator) assimilators;
        // Oracles to determine the price
        // Note that 0'th index should always be USDC 1e18
        // Oracle's pricing should be denominated in Currency/USDC
        mapping(address => IOracle) oracles;
        // ERC20 Interface
        uint256 totalSupply;
        mapping(address => uint256) balances;
        mapping(address => mapping(address => uint256)) allowances;
    }

    struct Assimilator {
        address addr;
        uint8 ix;
    }

    // Curve parameters
    Curve public curve;

    // Ownable
    address public owner;

    string public name;
    string public symbol;
    uint8 public constant decimals = 18;

    address[] public derivatives;
    address[] public numeraires;
    address[] public reserves;

    // Curve operational state
    bool public frozen = false;
    bool public emergency = false;
    bool public whitelistingStage = true;
    bool internal notEntered = true;

    mapping(address => uint256) public whitelistedDeposited;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.13;

import "../lib/openzeppelin-contracts/contracts/utils/cryptography/MerkleProof.sol";

contract MerkleProver {
    bytes32 public immutable merkleRoot = bytes32(0xf4dbd0fb1957570029a847490cb3d731a45962072953ba7da80ff132ccd97d51);

    function isWhitelisted(
        uint256 index,
        address account,
        uint256 amount,
        bytes32[] calldata merkleProof
    ) public view returns (bool) {
        // Verify the merkle proof.
        bytes32 node = keccak256(abi.encodePacked(index, account, amount));
        return MerkleProof.verify(merkleProof, merkleRoot, node);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

// SPDX-License-Identifier: MIT

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.8.13;

import "./Storage.sol";

import "./lib/UnsafeMath64x64.sol";
import "./lib/ABDKMath64x64.sol";

library CurveMath {
    int128 private constant ONE = 0x10000000000000000;
    int128 private constant MAX = 0x4000000000000000; // .25 in layman's terms
    int128 private constant MAX_DIFF = -0x10C6F7A0B5EE;
    int128 private constant ONE_WEI = 0x12;

    using ABDKMath64x64 for int128;
    using UnsafeMath64x64 for int128;
    using ABDKMath64x64 for uint256;

    // This is used to prevent stack too deep errors
    function calculateFee(
        int128 _gLiq,
        int128[] memory _bals,
        Storage.Curve storage curve,
        int128[] memory _weights
    ) internal view returns (int128 psi_) {
        int128 _beta = curve.beta;
        int128 _delta = curve.delta;

        psi_ = calculateFee(_gLiq, _bals, _beta, _delta, _weights);
    }

    function calculateFee(
        int128 _gLiq,
        int128[] memory _bals,
        int128 _beta,
        int128 _delta,
        int128[] memory _weights
    ) internal pure returns (int128 psi_) {
        uint256 _length = _bals.length;

        for (uint256 i = 0; i < _length; i++) {
            int128 _ideal = _gLiq.mul(_weights[i]);
            psi_ += calculateMicroFee(_bals[i], _ideal, _beta, _delta);
        }
    }

    function calculateMicroFee(
        int128 _bal,
        int128 _ideal,
        int128 _beta,
        int128 _delta
    ) private pure returns (int128 fee_) {
        if (_bal < _ideal) {
            int128 _threshold = _ideal.mul(ONE - _beta);

            if (_bal < _threshold) {
                int128 _feeMargin = _threshold - _bal;

                fee_ = _feeMargin.mul(_delta);
                fee_ = fee_.div(_ideal);

                if (fee_ > MAX) fee_ = MAX;

                fee_ = fee_.mul(_feeMargin);
            } else fee_ = 0;
        } else {
            int128 _threshold = _ideal.mul(ONE + _beta);

            if (_bal > _threshold) {
                int128 _feeMargin = _bal - _threshold;

                fee_ = _feeMargin.mul(_delta);
                fee_ = fee_.div(_ideal);

                if (fee_ > MAX) fee_ = MAX;

                fee_ = fee_.mul(_feeMargin);
            } else fee_ = 0;
        }
    }

    function calculateTrade(
        Storage.Curve storage curve,
        int128 _oGLiq,
        int128 _nGLiq,
        int128[] memory _oBals,
        int128[] memory _nBals,
        int128 _inputAmt,
        uint256 _outputIndex
    ) internal view returns (int128 outputAmt_) {
        outputAmt_ = -_inputAmt;

        int128 _lambda = curve.lambda;
        int128[] memory _weights = curve.weights;

        int128 _omega = calculateFee(_oGLiq, _oBals, curve, _weights);
        int128 _psi;

        for (uint256 i = 0; i < 32; i++) {
            _psi = calculateFee(_nGLiq, _nBals, curve, _weights);

            int128 prevAmount;
            {
                prevAmount = outputAmt_;
                outputAmt_ = _omega < _psi ? -(_inputAmt + _omega - _psi) : -(_inputAmt + _lambda.mul(_omega - _psi));
                // outputAmt_ = _omega < _psi ? -(_inputAmt + _omega - _psi) : -(_inputAmt +_omega - _psi);
            }

            if (outputAmt_ / 1e13 == prevAmount / 1e13) {
                _nGLiq = _oGLiq + _inputAmt + outputAmt_;

                _nBals[_outputIndex] = _oBals[_outputIndex] + outputAmt_;

                enforceHalts(curve, _oGLiq, _nGLiq, _oBals, _nBals, _weights);

                enforceSwapInvariant(_oGLiq, _omega, _nGLiq, _psi);
                return outputAmt_;
            } else {
                _nGLiq = _oGLiq + _inputAmt + outputAmt_;

                _nBals[_outputIndex] = _oBals[_outputIndex].add(outputAmt_);
            }
        }

        revert("Curve/swap-convergence-failed");
    }

    function calculateLiquidityMembrane(
        Storage.Curve storage curve,
        int128 _oGLiq,
        int128 _nGLiq,
        int128[] memory _oBals,
        int128[] memory _nBals
    ) internal view returns (int128 curves_) {
        enforceHalts(curve, _oGLiq, _nGLiq, _oBals, _nBals, curve.weights);

        int128 _omega;
        int128 _psi;

        {
            int128 _beta = curve.beta;
            int128 _delta = curve.delta;
            int128[] memory _weights = curve.weights;

            _omega = calculateFee(_oGLiq, _oBals, _beta, _delta, _weights);
            _psi = calculateFee(_nGLiq, _nBals, _beta, _delta, _weights);
        }

        int128 _feeDiff = _psi.sub(_omega);
        int128 _liqDiff = _nGLiq.sub(_oGLiq);
        int128 _oUtil = _oGLiq.sub(_omega);
        int128 _totalShells = curve.totalSupply.divu(1e18);
        int128 _curveMultiplier;

        if (_totalShells == 0) {
            curves_ = _nGLiq.sub(_psi);
        } else if (_feeDiff >= 0) {
            _curveMultiplier = _liqDiff.sub(_feeDiff).div(_oUtil);
        } else {
            _curveMultiplier = _liqDiff.sub(curve.lambda.mul(_feeDiff));

            _curveMultiplier = _curveMultiplier.div(_oUtil);
        }

        if (_totalShells != 0) {
            curves_ = _totalShells.mul(_curveMultiplier);
        }
    }

    function enforceSwapInvariant(
        int128 _oGLiq,
        int128 _omega,
        int128 _nGLiq,
        int128 _psi
    ) private pure {
        int128 _nextUtil = _nGLiq - _psi;

        int128 _prevUtil = _oGLiq - _omega;

        int128 _diff = _nextUtil - _prevUtil;

        require(0 < _diff || _diff >= MAX_DIFF, "Curve/swap-invariant-violation");
    }

    function enforceHalts(
        Storage.Curve storage curve,
        int128 _oGLiq,
        int128 _nGLiq,
        int128[] memory _oBals,
        int128[] memory _nBals,
        int128[] memory _weights
    ) private view {
        uint256 _length = _nBals.length;
        int128 _alpha = curve.alpha;

        for (uint256 i = 0; i < _length; i++) {
            int128 _nIdeal = _nGLiq.mul(_weights[i]);

            if (_nBals[i] > _nIdeal) {
                int128 _upperAlpha = ONE + _alpha;

                int128 _nHalt = _nIdeal.mul(_upperAlpha);

                if (_nBals[i] > _nHalt) {
                    int128 _oHalt = _oGLiq.mul(_weights[i]).mul(_upperAlpha);

                    if (_oBals[i] < _oHalt) revert("Curve/upper-halt");
                    if (_nBals[i] - _nHalt > _oBals[i] - _oHalt) revert("Curve/upper-halt");
                }
            } else {
                int128 _lowerAlpha = ONE - _alpha;

                int128 _nHalt = _nIdeal.mul(_lowerAlpha);

                if (_nBals[i] < _nHalt) {
                    int128 _oHalt = _oGLiq.mul(_weights[i]);
                    _oHalt = _oHalt.mul(_lowerAlpha);

                    if (_oBals[i] > _oHalt) revert("Curve/lower-halt");
                    if (_nHalt - _nBals[i] > _oHalt - _oBals[i]) revert("Curve/lower-halt");
                }
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.8.13;

interface IOracle {
    function acceptOwnership() external;

    function accessController() external view returns (address);

    function aggregator() external view returns (address);

    function confirmAggregator(address _aggregator) external;

    function decimals() external view returns (uint8);

    function description() external view returns (string memory);

    function getAnswer(uint256 _roundId) external view returns (int256);

    function getRoundData(uint80 _roundId)
        external
        view
        returns (
            uint80 roundId,
            int256 answer,
            uint256 startedAt,
            uint256 updatedAt,
            uint80 answeredInRound
        );

    function getTimestamp(uint256 _roundId) external view returns (uint256);

    function latestAnswer() external view returns (int256);

    function latestRound() external view returns (uint256);

    function latestRoundData()
        external
        view
        returns (
            uint80 roundId,
            int256 answer,
            uint256 startedAt,
            uint256 updatedAt,
            uint80 answeredInRound
        );

    function latestTimestamp() external view returns (uint256);

    function owner() external view returns (address);

    function phaseAggregators(uint16) external view returns (address);

    function phaseId() external view returns (uint16);

    function proposeAggregator(address _aggregator) external;

    function proposedAggregator() external view returns (address);

    function proposedGetRoundData(uint80 _roundId)
        external
        view
        returns (
            uint80 roundId,
            int256 answer,
            uint256 startedAt,
            uint256 updatedAt,
            uint80 answeredInRound
        );

    function proposedLatestRoundData()
        external
        view
        returns (
            uint80 roundId,
            int256 answer,
            uint256 startedAt,
            uint256 updatedAt,
            uint80 answeredInRound
        );

    function setController(address _accessController) external;

    function transferOwnership(address _to) external;

    function version() external view returns (uint256);
}

// SPDX-License-Identifier: MIT

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.8.13;

import "../lib/openzeppelin-contracts/contracts/utils/Address.sol";
import "./interfaces/IAssimilator.sol";
import "./lib/ABDKMath64x64.sol";

library Assimilators {
    using ABDKMath64x64 for int128;
    using Address for address;

    IAssimilator public constant iAsmltr = IAssimilator(address(0));

    function delegate(address _callee, bytes memory _data) internal returns (bytes memory) {
        require(_callee.isContract(), "Assimilators/callee-is-not-a-contract");

        // solhint-disable-next-line
        (bool _success, bytes memory returnData_) = _callee.delegatecall(_data);

        // solhint-disable-next-line
        assembly {
            if eq(_success, 0) {
                revert(add(returnData_, 0x20), returndatasize())
            }
        }

        return returnData_;
    }

    function getRate(address _assim) internal view returns (uint256 amount_) {
        amount_ = IAssimilator(_assim).getRate();
    }

    function viewRawAmount(address _assim, int128 _amt) internal view returns (uint256 amount_) {
        amount_ = IAssimilator(_assim).viewRawAmount(_amt);
    }

    function viewRawAmountLPRatio(
        address _assim,
        uint256 _baseWeight,
        uint256 _quoteWeight,
        int128 _amount
    ) internal view returns (uint256 amount_) {
        amount_ = IAssimilator(_assim).viewRawAmountLPRatio(_baseWeight, _quoteWeight, address(this), _amount);
    }

    function viewNumeraireAmount(address _assim, uint256 _amt) internal view returns (int128 amt_) {
        amt_ = IAssimilator(_assim).viewNumeraireAmount(_amt);
    }

    function viewNumeraireAmountAndBalance(address _assim, uint256 _amt)
        internal
        view
        returns (int128 amt_, int128 bal_)
    {
        (amt_, bal_) = IAssimilator(_assim).viewNumeraireAmountAndBalance(address(this), _amt);
    }

    function viewNumeraireBalance(address _assim) internal view returns (int128 bal_) {
        bal_ = IAssimilator(_assim).viewNumeraireBalance(address(this));
    }

    function viewNumeraireBalanceLPRatio(
        uint256 _baseWeight,
        uint256 _quoteWeight,
        address _assim
    ) internal view returns (int128 bal_) {
        bal_ = IAssimilator(_assim).viewNumeraireBalanceLPRatio(_baseWeight, _quoteWeight, address(this));
    }

    function intakeRaw(address _assim, uint256 _amt) internal returns (int128 amt_) {
        bytes memory data = abi.encodeWithSelector(iAsmltr.intakeRaw.selector, _amt);

        amt_ = abi.decode(delegate(_assim, data), (int128));
    }

    function intakeRawAndGetBalance(address _assim, uint256 _amt) internal returns (int128 amt_, int128 bal_) {
        bytes memory data = abi.encodeWithSelector(iAsmltr.intakeRawAndGetBalance.selector, _amt);

        (amt_, bal_) = abi.decode(delegate(_assim, data), (int128, int128));
    }

    function intakeNumeraire(address _assim, int128 _amt) internal returns (uint256 amt_) {
        bytes memory data = abi.encodeWithSelector(iAsmltr.intakeNumeraire.selector, _amt);

        amt_ = abi.decode(delegate(_assim, data), (uint256));
    }

    function intakeNumeraireLPRatio(
        address _assim,
        uint256 _baseWeight,
        uint256 _quoteWeight,
        int128 _amount
    ) internal returns (uint256 amt_) {
        bytes memory data =
            abi.encodeWithSelector(
                iAsmltr.intakeNumeraireLPRatio.selector,
                _baseWeight,
                _quoteWeight,
                address(this),
                _amount
            );

        amt_ = abi.decode(delegate(_assim, data), (uint256));
    }

    function outputRaw(
        address _assim,
        address _dst,
        uint256 _amt
    ) internal returns (int128 amt_) {
        bytes memory data = abi.encodeWithSelector(iAsmltr.outputRaw.selector, _dst, _amt);

        amt_ = abi.decode(delegate(_assim, data), (int128));

        amt_ = amt_.neg();
    }

    function outputRawAndGetBalance(
        address _assim,
        address _dst,
        uint256 _amt
    ) internal returns (int128 amt_, int128 bal_) {
        bytes memory data = abi.encodeWithSelector(iAsmltr.outputRawAndGetBalance.selector, _dst, _amt);

        (amt_, bal_) = abi.decode(delegate(_assim, data), (int128, int128));

        amt_ = amt_.neg();
    }

    function outputNumeraire(
        address _assim,
        address _dst,
        int128 _amt
    ) internal returns (uint256 amt_) {
        bytes memory data = abi.encodeWithSelector(iAsmltr.outputNumeraire.selector, _dst, _amt.abs());

        amt_ = abi.decode(delegate(_assim, data), (uint256));
    }

    function transferFee(
        address _assim,
        int128 _amt,
        address _treasury
    ) internal {
        bytes memory data = abi.encodeWithSelector(iAsmltr.transferFee.selector, _amt, _treasury);
        delegate(_assim, data);
    }
}

// SPDX-License-Identifier: MIT

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.8.13;

interface IAssimilator {
    function getRate() external view returns (uint256);

    function intakeRaw(uint256 amount) external returns (int128);

    function intakeRawAndGetBalance(uint256 amount) external returns (int128, int128);

    function intakeNumeraire(int128 amount) external returns (uint256);

    function intakeNumeraireLPRatio(
        uint256,
        uint256,
        address,
        int128
    ) external returns (uint256);

    function outputRaw(address dst, uint256 amount) external returns (int128);

    function outputRawAndGetBalance(address dst, uint256 amount) external returns (int128, int128);

    function outputNumeraire(address dst, int128 amount) external returns (uint256);

    function viewRawAmount(int128) external view returns (uint256);

    function viewRawAmountLPRatio(
        uint256,
        uint256,
        address,
        int128
    ) external view returns (uint256);

    function viewNumeraireAmount(uint256) external view returns (int128);

    function viewNumeraireBalanceLPRatio(
        uint256,
        uint256,
        address
    ) external view returns (int128);

    function viewNumeraireBalance(address) external view returns (int128);

    function viewNumeraireAmountAndBalance(address, uint256) external view returns (int128, int128);

    function transferFee(int128, address) external returns (bool);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.13;

library UnsafeMath64x64 {

  /**
   * Calculate x * y rounding down.
   *
   * @param x signed 64.64-bit fixed point number
   * @param y signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */

  function us_mul (int128 x, int128 y) internal pure returns (int128) {
    int256 result = int256(x) * y >> 64;
    return int128 (result);
  }

  /**
   * Calculate x / y rounding towards zero.  Revert on overflow or when y is
   * zero.
   *
   * @param x signed 64.64-bit fixed point number
   * @param y signed 64.64-bit fixed point number
   * @return signed 64.64-bit fixed point number
   */

  function us_div (int128 x, int128 y) internal pure returns (int128) {
    int256 result = (int256 (x) << 64) / y;
    return int128 (result);
  }

}

// SPDX-License-Identifier: MIT

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is disstributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.8.13;

// Finds new Curves! logs their addresses and provides `isCurve(address) -> (bool)`

import "./Curve.sol";

import "./interfaces/IFreeFromUpTo.sol";

import "../lib/openzeppelin-contracts/contracts/access/Ownable.sol";

contract CurveFactory is Ownable {
    event NewCurve(address indexed caller, bytes32 indexed id, address indexed curve);

    mapping(bytes32 => address) public curves;

    function getCurve(address _baseCurrency, address _quoteCurrency) external view returns (address) {
        bytes32 curveId = keccak256(abi.encode(_baseCurrency, _quoteCurrency));
        return (curves[curveId]);
    }

    function newCurve(
        string memory _name,
        string memory _symbol,
        address _baseCurrency,
        address _quoteCurrency,
        uint256 _baseWeight,
        uint256 _quoteWeight,
        address _baseAssimilator,
        address _quoteAssimilator
    ) public onlyOwner returns (Curve) {
        bytes32 curveId = keccak256(abi.encode(_baseCurrency, _quoteCurrency));
        if (curves[curveId] != address(0)) revert("CurveFactory/currency-pair-already-exists");

        address[] memory _assets = new address[](10);
        uint256[] memory _assetWeights = new uint256[](2);

        // Base Currency
        _assets[0] = _baseCurrency;
        _assets[1] = _baseAssimilator;
        _assets[2] = _baseCurrency;
        _assets[3] = _baseAssimilator;
        _assets[4] = _baseCurrency;

        // Quote Currency (typically USDC)
        _assets[5] = _quoteCurrency;
        _assets[6] = _quoteAssimilator;
        _assets[7] = _quoteCurrency;
        _assets[8] = _quoteAssimilator;
        _assets[9] = _quoteCurrency;

        // Weights
        _assetWeights[0] = _baseWeight;
        _assetWeights[1] = _quoteWeight;

        // New curve
        Curve curve = new Curve(_name, _symbol, _assets, _assetWeights, address(this));
        curve.transferOwnership(msg.sender);
        curves[curveId] = address(curve);

        emit NewCurve(msg.sender, curveId, address(curve));

        return curve;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/cryptography/MerkleProof.sol)

pragma solidity ^0.8.0;

/**
 * @dev These functions deal with verification of Merkle Tree proofs.
 *
 * The proofs can be generated using the JavaScript library
 * https://github.com/miguelmota/merkletreejs[merkletreejs].
 * Note: the hashing algorithm should be keccak256 and pair sorting should be enabled.
 *
 * See `test/utils/cryptography/MerkleProof.test.js` for some examples.
 *
 * WARNING: You should avoid using leaf values that are 64 bytes long prior to
 * hashing, or use a hash function other than keccak256 for hashing leaves.
 * This is because the concatenation of a sorted pair of internal nodes in
 * the merkle tree could be reinterpreted as a leaf value.
 */
library MerkleProof {
    /**
     * @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
     * defined by `root`. For this, a `proof` must be provided, containing
     * sibling hashes on the branch from the leaf to the root of the tree. Each
     * pair of leaves and each pair of pre-images are assumed to be sorted.
     */
    function verify(
        bytes32[] memory proof,
        bytes32 root,
        bytes32 leaf
    ) internal pure returns (bool) {
        return processProof(proof, leaf) == root;
    }

    /**
     * @dev Calldata version of {verify}
     *
     * _Available since v4.7._
     */
    function verifyCalldata(
        bytes32[] calldata proof,
        bytes32 root,
        bytes32 leaf
    ) internal pure returns (bool) {
        return processProofCalldata(proof, leaf) == root;
    }

    /**
     * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up
     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
     * hash matches the root of the tree. When processing the proof, the pairs
     * of leafs & pre-images are assumed to be sorted.
     *
     * _Available since v4.4._
     */
    function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
        bytes32 computedHash = leaf;
        for (uint256 i = 0; i < proof.length; i++) {
            computedHash = _hashPair(computedHash, proof[i]);
        }
        return computedHash;
    }

    /**
     * @dev Calldata version of {processProof}
     *
     * _Available since v4.7._
     */
    function processProofCalldata(bytes32[] calldata proof, bytes32 leaf) internal pure returns (bytes32) {
        bytes32 computedHash = leaf;
        for (uint256 i = 0; i < proof.length; i++) {
            computedHash = _hashPair(computedHash, proof[i]);
        }
        return computedHash;
    }

    /**
     * @dev Returns true if the `leaves` can be simultaneously proven to be a part of a merkle tree defined by
     * `root`, according to `proof` and `proofFlags` as described in {processMultiProof}.
     *
     * CAUTION: Not all merkle trees admit multiproofs. See {processMultiProof} for details.
     *
     * _Available since v4.7._
     */
    function multiProofVerify(
        bytes32[] memory proof,
        bool[] memory proofFlags,
        bytes32 root,
        bytes32[] memory leaves
    ) internal pure returns (bool) {
        return processMultiProof(proof, proofFlags, leaves) == root;
    }

    /**
     * @dev Calldata version of {multiProofVerify}
     *
     * CAUTION: Not all merkle trees admit multiproofs. See {processMultiProof} for details.
     *
     * _Available since v4.7._
     */
    function multiProofVerifyCalldata(
        bytes32[] calldata proof,
        bool[] calldata proofFlags,
        bytes32 root,
        bytes32[] memory leaves
    ) internal pure returns (bool) {
        return processMultiProofCalldata(proof, proofFlags, leaves) == root;
    }

    /**
     * @dev Returns the root of a tree reconstructed from `leaves` and sibling nodes in `proof`. The reconstruction
     * proceeds by incrementally reconstructing all inner nodes by combining a leaf/inner node with either another
     * leaf/inner node or a proof sibling node, depending on whether each `proofFlags` item is true or false
     * respectively.
     *
     * CAUTION: Not all merkle trees admit multiproofs. To use multiproofs, it is sufficient to ensure that: 1) the tree
     * is complete (but not necessarily perfect), 2) the leaves to be proven are in the opposite order they are in the
     * tree (i.e., as seen from right to left starting at the deepest layer and continuing at the next layer).
     *
     * _Available since v4.7._
     */
    function processMultiProof(
        bytes32[] memory proof,
        bool[] memory proofFlags,
        bytes32[] memory leaves
    ) internal pure returns (bytes32 merkleRoot) {
        // This function rebuild the root hash by traversing the tree up from the leaves. The root is rebuilt by
        // consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the
        // `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of
        // the merkle tree.
        uint256 leavesLen = leaves.length;
        uint256 totalHashes = proofFlags.length;

        // Check proof validity.
        require(leavesLen + proof.length - 1 == totalHashes, "MerkleProof: invalid multiproof");

        // The xxxPos values are "pointers" to the next value to consume in each array. All accesses are done using
        // `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's "pop".
        bytes32[] memory hashes = new bytes32[](totalHashes);
        uint256 leafPos = 0;
        uint256 hashPos = 0;
        uint256 proofPos = 0;
        // At each step, we compute the next hash using two values:
        // - a value from the "main queue". If not all leaves have been consumed, we get the next leaf, otherwise we
        //   get the next hash.
        // - depending on the flag, either another value for the "main queue" (merging branches) or an element from the
        //   `proof` array.
        for (uint256 i = 0; i < totalHashes; i++) {
            bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];
            bytes32 b = proofFlags[i] ? leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++] : proof[proofPos++];
            hashes[i] = _hashPair(a, b);
        }

        if (totalHashes > 0) {
            return hashes[totalHashes - 1];
        } else if (leavesLen > 0) {
            return leaves[0];
        } else {
            return proof[0];
        }
    }

    /**
     * @dev Calldata version of {processMultiProof}.
     *
     * CAUTION: Not all merkle trees admit multiproofs. See {processMultiProof} for details.
     *
     * _Available since v4.7._
     */
    function processMultiProofCalldata(
        bytes32[] calldata proof,
        bool[] calldata proofFlags,
        bytes32[] memory leaves
    ) internal pure returns (bytes32 merkleRoot) {
        // This function rebuild the root hash by traversing the tree up from the leaves. The root is rebuilt by
        // consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the
        // `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of
        // the merkle tree.
        uint256 leavesLen = leaves.length;
        uint256 totalHashes = proofFlags.length;

        // Check proof validity.
        require(leavesLen + proof.length - 1 == totalHashes, "MerkleProof: invalid multiproof");

        // The xxxPos values are "pointers" to the next value to consume in each array. All accesses are done using
        // `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's "pop".
        bytes32[] memory hashes = new bytes32[](totalHashes);
        uint256 leafPos = 0;
        uint256 hashPos = 0;
        uint256 proofPos = 0;
        // At each step, we compute the next hash using two values:
        // - a value from the "main queue". If not all leaves have been consumed, we get the next leaf, otherwise we
        //   get the next hash.
        // - depending on the flag, either another value for the "main queue" (merging branches) or an element from the
        //   `proof` array.
        for (uint256 i = 0; i < totalHashes; i++) {
            bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];
            bytes32 b = proofFlags[i] ? leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++] : proof[proofPos++];
            hashes[i] = _hashPair(a, b);
        }

        if (totalHashes > 0) {
            return hashes[totalHashes - 1];
        } else if (leavesLen > 0) {
            return leaves[0];
        } else {
            return proof[0];
        }
    }

    function _hashPair(bytes32 a, bytes32 b) private pure returns (bytes32) {
        return a < b ? _efficientHash(a, b) : _efficientHash(b, a);
    }

    function _efficientHash(bytes32 a, bytes32 b) private pure returns (bytes32 value) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, a)
            mstore(0x20, b)
            value := keccak256(0x00, 0x40)
        }
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_factory","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"factory","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_quoteCurrency","type":"address"},{"internalType":"address","name":"_origin","type":"address"},{"internalType":"address","name":"_target","type":"address"},{"internalType":"uint256","name":"_originAmount","type":"uint256"},{"internalType":"uint256","name":"_minTargetAmount","type":"uint256"},{"internalType":"uint256","name":"_deadline","type":"uint256"}],"name":"originSwap","outputs":[{"internalType":"uint256","name":"targetAmount_","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_quoteCurrency","type":"address"},{"internalType":"address","name":"_origin","type":"address"},{"internalType":"address","name":"_target","type":"address"},{"internalType":"uint256","name":"_originAmount","type":"uint256"}],"name":"viewOriginSwap","outputs":[{"internalType":"uint256","name":"targetAmount_","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_quoteCurrency","type":"address"},{"internalType":"address","name":"_origin","type":"address"},{"internalType":"address","name":"_target","type":"address"},{"internalType":"uint256","name":"_targetAmount","type":"uint256"}],"name":"viewTargetSwap","outputs":[{"internalType":"uint256","name":"originAmount_","type":"uint256"}],"stateMutability":"view","type":"function"}]

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

000000000000000000000000de5bb69892d663f1facbe351363509bcb65573aa

-----Decoded View---------------
Arg [0] : _factory (address): 0xDE5bb69892D663f1facBE351363509BcB65573AA

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 000000000000000000000000de5bb69892d663f1facbe351363509bcb65573aa