Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.22;

import { SafeERC20, IERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

import { MessagingReceipt } from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroEndpointV2.sol";

import { IOFT } from "@layerzerolabs/lz-evm-oapp-v2/contracts/oft/interfaces/IOFT.sol";

import { IDonate, Currency } from "./donate/IDonate.sol";
import { IClaim } from "./claim/IClaim.sol";

/**
 * @title DonateAndClaim
 */
contract DonateAndClaim {
    using SafeERC20 for IERC20;

    address public immutable donateContract;
    address public immutable claimContract;

    // stargate instances that will be used to move donations in the event this is inherited by the DonateRemote.sol
    address public immutable stargateUsdc;
    address public immutable stargateUsdt;
    address public immutable stargateNative;

    IERC20 public immutable tokenUsdc;
    IERC20 public immutable tokenUsdt;

    // We pass stargate to ensure there is no config mismatch with regards to stargate and corresponding token address
    constructor(
        address _donateContract,
        address _claimContract,
        address _stargateUsdc,
        address _stargateUsdt,
        address _stargateNative
    ) {
        donateContract = _donateContract;
        claimContract = _claimContract;

        if (_stargateUsdc != address(0)) {
            stargateUsdc = _stargateUsdc;
            tokenUsdc = IERC20(IOFT(stargateUsdc).token());
            tokenUsdc.forceApprove(donateContract, type(uint256).max);
        }

        if (_stargateUsdt != address(0)) {
            stargateUsdt = _stargateUsdt;
            tokenUsdt = IERC20(IOFT(stargateUsdt).token());
            tokenUsdt.forceApprove(donateContract, type(uint256).max);
        }

        // There is no token for native because donations are only accepted in native, eg. NOT 'WETH'
        if (_stargateNative != address(0)) {
            stargateNative = _stargateNative;
            // Only accept stargate if it is the native token
            if (IOFT(stargateNative).token() != address(0)) {
                revert IDonate.InvalidNativeStargate();
            }
        }
    }

    function donateAndClaim(
        Currency currency,
        uint256 amountToDonate,
        uint256 _zroAmount,
        bytes32[] calldata _proof,
        address _to,
        bytes calldata _extraBytes
    ) external payable returns (MessagingReceipt memory receipt) {
        uint256 donateNativeAmount;
        uint256 msgFee;

        // move tokens into the wrapper to forward to the donate contract
        if (currency == Currency.USDC && stargateUsdc != address(0)) {
            tokenUsdc.safeTransferFrom(msg.sender, address(this), amountToDonate);

            // donateNativeAmount = 0;
            msgFee = msg.value;
        } else if (currency == Currency.USDT && stargateUsdt != address(0)) {
            tokenUsdt.safeTransferFrom(msg.sender, address(this), amountToDonate);

            // donateNativeAmount = 0;
            msgFee = msg.value;
        } else if (currency == Currency.Native && stargateNative != address(0)) {
            if (msg.value < amountToDonate) revert IDonate.InsufficientMsgValue();

            donateNativeAmount = amountToDonate;
            msgFee = msg.value - donateNativeAmount;
        } else {
            // sanity just in case somehow a different currency is somehow passed
            revert IDonate.UnsupportedCurrency(currency);
        }

        // donate
        IDonate(donateContract).donate{ value: donateNativeAmount }(currency, amountToDonate, msg.sender);

        // claim
        return IClaim(claimContract).claim{ value: msgFee }(msg.sender, currency, _zroAmount, _proof, _to, _extraBytes);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { IOAppCore, ILayerZeroEndpointV2 } from "./interfaces/IOAppCore.sol";

/**
 * @title OAppCore
 * @dev Abstract contract implementing the IOAppCore interface with basic OApp configurations.
 */
abstract contract OAppCore is IOAppCore, Ownable {
    // The LayerZero endpoint associated with the given OApp
    ILayerZeroEndpointV2 public immutable endpoint;

    // Mapping to store peers associated with corresponding endpoints
    mapping(uint32 eid => bytes32 peer) public peers;

    /**
     * @dev Constructor to initialize the OAppCore with the provided endpoint and delegate.
     * @param _endpoint The address of the LOCAL Layer Zero endpoint.
     * @param _delegate The delegate capable of making OApp configurations inside of the endpoint.
     *
     * @dev The delegate typically should be set as the owner of the contract.
     */
    constructor(address _endpoint, address _delegate) {
        endpoint = ILayerZeroEndpointV2(_endpoint);

        if (_delegate == address(0)) revert InvalidDelegate();
        endpoint.setDelegate(_delegate);
    }

    /**
     * @notice Sets the peer address (OApp instance) for a corresponding endpoint.
     * @param _eid The endpoint ID.
     * @param _peer The address of the peer to be associated with the corresponding endpoint.
     *
     * @dev Only the owner/admin of the OApp can call this function.
     * @dev Indicates that the peer is trusted to send LayerZero messages to this OApp.
     * @dev Set this to bytes32(0) to remove the peer address.
     * @dev Peer is a bytes32 to accommodate non-evm chains.
     */
    function setPeer(uint32 _eid, bytes32 _peer) public virtual onlyOwner {
        _setPeer(_eid, _peer);
    }

    /**
     * @notice Sets the peer address (OApp instance) for a corresponding endpoint.
     * @param _eid The endpoint ID.
     * @param _peer The address of the peer to be associated with the corresponding endpoint.
     *
     * @dev Indicates that the peer is trusted to send LayerZero messages to this OApp.
     * @dev Set this to bytes32(0) to remove the peer address.
     * @dev Peer is a bytes32 to accommodate non-evm chains.
     */
    function _setPeer(uint32 _eid, bytes32 _peer) internal virtual {
        peers[_eid] = _peer;
        emit PeerSet(_eid, _peer);
    }

    /**
     * @notice Internal function to get the peer address associated with a specific endpoint; reverts if NOT set.
     * ie. the peer is set to bytes32(0).
     * @param _eid The endpoint ID.
     * @return peer The address of the peer associated with the specified endpoint.
     */
    function _getPeerOrRevert(uint32 _eid) internal view virtual returns (bytes32) {
        bytes32 peer = peers[_eid];
        if (peer == bytes32(0)) revert NoPeer(_eid);
        return peer;
    }

    /**
     * @notice Sets the delegate address for the OApp.
     * @param _delegate The address of the delegate to be set.
     *
     * @dev Only the owner/admin of the OApp can call this function.
     * @dev Provides the ability for a delegate to set configs, on behalf of the OApp, directly on the Endpoint contract.
     */
    function setDelegate(address _delegate) public onlyOwner {
        endpoint.setDelegate(_delegate);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { SafeERC20, IERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { MessagingParams, MessagingFee, MessagingReceipt } from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroEndpointV2.sol";
import { OAppCore } from "./OAppCore.sol";

/**
 * @title OAppSender
 * @dev Abstract contract implementing the OAppSender functionality for sending messages to a LayerZero endpoint.
 */
abstract contract OAppSender is OAppCore {
    using SafeERC20 for IERC20;

    // Custom error messages
    error NotEnoughNative(uint256 msgValue);
    error LzTokenUnavailable();

    // @dev The version of the OAppSender implementation.
    // @dev Version is bumped when changes are made to this contract.
    uint64 internal constant SENDER_VERSION = 1;

    /**
     * @notice Retrieves the OApp version information.
     * @return senderVersion The version of the OAppSender.sol contract.
     * @return receiverVersion The version of the OAppReceiver.sol contract.
     *
     * @dev Providing 0 as the default for OAppReceiver version. Indicates that the OAppReceiver is not implemented.
     * ie. this is a SEND only OApp.
     * @dev If the OApp uses both OAppSender and OAppReceiver, then this needs to be override returning the correct versions
     */
    function oAppVersion() public view virtual returns (uint64 senderVersion, uint64 receiverVersion) {
        return (SENDER_VERSION, 0);
    }

    /**
     * @dev Internal function to interact with the LayerZero EndpointV2.quote() for fee calculation.
     * @param _dstEid The destination endpoint ID.
     * @param _message The message payload.
     * @param _options Additional options for the message.
     * @param _payInLzToken Flag indicating whether to pay the fee in LZ tokens.
     * @return fee The calculated MessagingFee for the message.
     *      - nativeFee: The native fee for the message.
     *      - lzTokenFee: The LZ token fee for the message.
     */
    function _quote(
        uint32 _dstEid,
        bytes memory _message,
        bytes memory _options,
        bool _payInLzToken
    ) internal view virtual returns (MessagingFee memory fee) {
        return
            endpoint.quote(
                MessagingParams(_dstEid, _getPeerOrRevert(_dstEid), _message, _options, _payInLzToken),
                address(this)
            );
    }

    /**
     * @dev Internal function to interact with the LayerZero EndpointV2.send() for sending a message.
     * @param _dstEid The destination endpoint ID.
     * @param _message The message payload.
     * @param _options Additional options for the message.
     * @param _fee The calculated LayerZero fee for the message.
     *      - nativeFee: The native fee.
     *      - lzTokenFee: The lzToken fee.
     * @param _refundAddress The address to receive any excess fee values sent to the endpoint.
     * @return receipt The receipt for the sent message.
     *      - guid: The unique identifier for the sent message.
     *      - nonce: The nonce of the sent message.
     *      - fee: The LayerZero fee incurred for the message.
     */
    function _lzSend(
        uint32 _dstEid,
        bytes memory _message,
        bytes memory _options,
        MessagingFee memory _fee,
        address _refundAddress
    ) internal virtual returns (MessagingReceipt memory receipt) {
        // @dev Push corresponding fees to the endpoint, any excess is sent back to the _refundAddress from the endpoint.
        uint256 messageValue = _payNative(_fee.nativeFee);
        if (_fee.lzTokenFee > 0) _payLzToken(_fee.lzTokenFee);

        return
            // solhint-disable-next-line check-send-result
            endpoint.send{ value: messageValue }(
                MessagingParams(_dstEid, _getPeerOrRevert(_dstEid), _message, _options, _fee.lzTokenFee > 0),
                _refundAddress
            );
    }

    /**
     * @dev Internal function to pay the native fee associated with the message.
     * @param _nativeFee The native fee to be paid.
     * @return nativeFee The amount of native currency paid.
     *
     * @dev If the OApp needs to initiate MULTIPLE LayerZero messages in a single transaction,
     * this will need to be overridden because msg.value would contain multiple lzFees.
     * @dev Should be overridden in the event the LayerZero endpoint requires a different native currency.
     * @dev Some EVMs use an ERC20 as a method for paying transactions/gasFees.
     * @dev The endpoint is EITHER/OR, ie. it will NOT support both types of native payment at a time.
     */
    function _payNative(uint256 _nativeFee) internal virtual returns (uint256 nativeFee) {
        if (msg.value != _nativeFee) revert NotEnoughNative(msg.value);
        return _nativeFee;
    }

    /**
     * @dev Internal function to pay the LZ token fee associated with the message.
     * @param _lzTokenFee The LZ token fee to be paid.
     *
     * @dev If the caller is trying to pay in the specified lzToken, then the lzTokenFee is passed to the endpoint.
     * @dev Any excess sent, is passed back to the specified _refundAddress in the _lzSend().
     */
    function _payLzToken(uint256 _lzTokenFee) internal virtual {
        // @dev Cannot cache the token because it is not immutable in the endpoint.
        address lzToken = endpoint.lzToken();
        if (lzToken == address(0)) revert LzTokenUnavailable();

        // Pay LZ token fee by sending tokens to the endpoint.
        IERC20(lzToken).safeTransferFrom(msg.sender, address(endpoint), _lzTokenFee);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { ILayerZeroEndpointV2 } from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroEndpointV2.sol";

/**
 * @title IOAppCore
 */
interface IOAppCore {
    // Custom error messages
    error OnlyPeer(uint32 eid, bytes32 sender);
    error NoPeer(uint32 eid);
    error InvalidEndpointCall();
    error InvalidDelegate();

    // Event emitted when a peer (OApp) is set for a corresponding endpoint
    event PeerSet(uint32 eid, bytes32 peer);

    /**
     * @notice Retrieves the OApp version information.
     * @return senderVersion The version of the OAppSender.sol contract.
     * @return receiverVersion The version of the OAppReceiver.sol contract.
     */
    function oAppVersion() external view returns (uint64 senderVersion, uint64 receiverVersion);

    /**
     * @notice Retrieves the LayerZero endpoint associated with the OApp.
     * @return iEndpoint The LayerZero endpoint as an interface.
     */
    function endpoint() external view returns (ILayerZeroEndpointV2 iEndpoint);

    /**
     * @notice Retrieves the peer (OApp) associated with a corresponding endpoint.
     * @param _eid The endpoint ID.
     * @return peer The peer address (OApp instance) associated with the corresponding endpoint.
     */
    function peers(uint32 _eid) external view returns (bytes32 peer);

    /**
     * @notice Sets the peer address (OApp instance) for a corresponding endpoint.
     * @param _eid The endpoint ID.
     * @param _peer The address of the peer to be associated with the corresponding endpoint.
     */
    function setPeer(uint32 _eid, bytes32 _peer) external;

    /**
     * @notice Sets the delegate address for the OApp Core.
     * @param _delegate The address of the delegate to be set.
     */
    function setDelegate(address _delegate) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import { MessagingReceipt, MessagingFee } from "../../oapp/OAppSender.sol";

/**
 * @dev Struct representing token parameters for the OFT send() operation.
 */
struct SendParam {
    uint32 dstEid; // Destination endpoint ID.
    bytes32 to; // Recipient address.
    uint256 amountLD; // Amount to send in local decimals.
    uint256 minAmountLD; // Minimum amount to send in local decimals.
    bytes extraOptions; // Additional options supplied by the caller to be used in the LayerZero message.
    bytes composeMsg; // The composed message for the send() operation.
    bytes oftCmd; // The OFT command to be executed, unused in default OFT implementations.
}

/**
 * @dev Struct representing OFT limit information.
 * @dev These amounts can change dynamically and are up the the specific oft implementation.
 */
struct OFTLimit {
    uint256 minAmountLD; // Minimum amount in local decimals that can be sent to the recipient.
    uint256 maxAmountLD; // Maximum amount in local decimals that can be sent to the recipient.
}

/**
 * @dev Struct representing OFT receipt information.
 */
struct OFTReceipt {
    uint256 amountSentLD; // Amount of tokens ACTUALLY debited from the sender in local decimals.
    // @dev In non-default implementations, the amountReceivedLD COULD differ from this value.
    uint256 amountReceivedLD; // Amount of tokens to be received on the remote side.
}

/**
 * @dev Struct representing OFT fee details.
 * @dev Future proof mechanism to provide a standardized way to communicate fees to things like a UI.
 */
struct OFTFeeDetail {
    int256 feeAmountLD; // Amount of the fee in local decimals.
    string description; // Description of the fee.
}

/**
 * @title IOFT
 * @dev Interface for the OftChain (OFT) token.
 * @dev Does not inherit ERC20 to accommodate usage by OFTAdapter as well.
 * @dev This specific interface ID is '0x02e49c2c'.
 */
interface IOFT {
    // Custom error messages
    error InvalidLocalDecimals();
    error SlippageExceeded(uint256 amountLD, uint256 minAmountLD);

    // Events
    event OFTSent(
        bytes32 indexed guid, // GUID of the OFT message.
        uint32 dstEid, // Destination Endpoint ID.
        address indexed fromAddress, // Address of the sender on the src chain.
        uint256 amountSentLD, // Amount of tokens sent in local decimals.
        uint256 amountReceivedLD // Amount of tokens received in local decimals.
    );
    event OFTReceived(
        bytes32 indexed guid, // GUID of the OFT message.
        uint32 srcEid, // Source Endpoint ID.
        address indexed toAddress, // Address of the recipient on the dst chain.
        uint256 amountReceivedLD // Amount of tokens received in local decimals.
    );

    /**
     * @notice Retrieves interfaceID and the version of the OFT.
     * @return interfaceId The interface ID.
     * @return version The version.
     *
     * @dev interfaceId: This specific interface ID is '0x02e49c2c'.
     * @dev version: Indicates a cross-chain compatible msg encoding with other OFTs.
     * @dev If a new feature is added to the OFT cross-chain msg encoding, the version will be incremented.
     * ie. localOFT version(x,1) CAN send messages to remoteOFT version(x,1)
     */
    function oftVersion() external view returns (bytes4 interfaceId, uint64 version);

    /**
     * @notice Retrieves the address of the token associated with the OFT.
     * @return token The address of the ERC20 token implementation.
     */
    function token() external view returns (address);

    /**
     * @notice Indicates whether the OFT contract requires approval of the 'token()' to send.
     * @return requiresApproval Needs approval of the underlying token implementation.
     *
     * @dev Allows things like wallet implementers to determine integration requirements,
     * without understanding the underlying token implementation.
     */
    function approvalRequired() external view returns (bool);

    /**
     * @notice Retrieves the shared decimals of the OFT.
     * @return sharedDecimals The shared decimals of the OFT.
     */
    function sharedDecimals() external view returns (uint8);

    /**
     * @notice Provides a quote for OFT-related operations.
     * @param _sendParam The parameters for the send operation.
     * @return limit The OFT limit information.
     * @return oftFeeDetails The details of OFT fees.
     * @return receipt The OFT receipt information.
     */
    function quoteOFT(
        SendParam calldata _sendParam
    ) external view returns (OFTLimit memory, OFTFeeDetail[] memory oftFeeDetails, OFTReceipt memory);

    /**
     * @notice Provides a quote for the send() operation.
     * @param _sendParam The parameters for the send() operation.
     * @param _payInLzToken Flag indicating whether the caller is paying in the LZ token.
     * @return fee The calculated LayerZero messaging fee from the send() operation.
     *
     * @dev MessagingFee: LayerZero msg fee
     *  - nativeFee: The native fee.
     *  - lzTokenFee: The lzToken fee.
     */
    function quoteSend(SendParam calldata _sendParam, bool _payInLzToken) external view returns (MessagingFee memory);

    /**
     * @notice Executes the send() operation.
     * @param _sendParam The parameters for the send operation.
     * @param _fee The fee information supplied by the caller.
     *      - nativeFee: The native fee.
     *      - lzTokenFee: The lzToken fee.
     * @param _refundAddress The address to receive any excess funds from fees etc. on the src.
     * @return receipt The LayerZero messaging receipt from the send() operation.
     * @return oftReceipt The OFT receipt information.
     *
     * @dev MessagingReceipt: LayerZero msg receipt
     *  - guid: The unique identifier for the sent message.
     *  - nonce: The nonce of the sent message.
     *  - fee: The LayerZero fee incurred for the message.
     */
    function send(
        SendParam calldata _sendParam,
        MessagingFee calldata _fee,
        address _refundAddress
    ) external payable returns (MessagingReceipt memory, OFTReceipt memory);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.8.0;

import { IMessageLibManager } from "./IMessageLibManager.sol";
import { IMessagingComposer } from "./IMessagingComposer.sol";
import { IMessagingChannel } from "./IMessagingChannel.sol";
import { IMessagingContext } from "./IMessagingContext.sol";

struct MessagingParams {
    uint32 dstEid;
    bytes32 receiver;
    bytes message;
    bytes options;
    bool payInLzToken;
}

struct MessagingReceipt {
    bytes32 guid;
    uint64 nonce;
    MessagingFee fee;
}

struct MessagingFee {
    uint256 nativeFee;
    uint256 lzTokenFee;
}

struct Origin {
    uint32 srcEid;
    bytes32 sender;
    uint64 nonce;
}

interface ILayerZeroEndpointV2 is IMessageLibManager, IMessagingComposer, IMessagingChannel, IMessagingContext {
    event PacketSent(bytes encodedPayload, bytes options, address sendLibrary);

    event PacketVerified(Origin origin, address receiver, bytes32 payloadHash);

    event PacketDelivered(Origin origin, address receiver);

    event LzReceiveAlert(
        address indexed receiver,
        address indexed executor,
        Origin origin,
        bytes32 guid,
        uint256 gas,
        uint256 value,
        bytes message,
        bytes extraData,
        bytes reason
    );

    event LzTokenSet(address token);

    event DelegateSet(address sender, address delegate);

    function quote(MessagingParams calldata _params, address _sender) external view returns (MessagingFee memory);

    function send(
        MessagingParams calldata _params,
        address _refundAddress
    ) external payable returns (MessagingReceipt memory);

    function verify(Origin calldata _origin, address _receiver, bytes32 _payloadHash) external;

    function verifiable(Origin calldata _origin, address _receiver) external view returns (bool);

    function initializable(Origin calldata _origin, address _receiver) external view returns (bool);

    function lzReceive(
        Origin calldata _origin,
        address _receiver,
        bytes32 _guid,
        bytes calldata _message,
        bytes calldata _extraData
    ) external payable;

    // oapp can burn messages partially by calling this function with its own business logic if messages are verified in order
    function clear(address _oapp, Origin calldata _origin, bytes32 _guid, bytes calldata _message) external;

    function setLzToken(address _lzToken) external;

    function lzToken() external view returns (address);

    function nativeToken() external view returns (address);

    function setDelegate(address _delegate) external;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.8.0;

struct SetConfigParam {
    uint32 eid;
    uint32 configType;
    bytes config;
}

interface IMessageLibManager {
    struct Timeout {
        address lib;
        uint256 expiry;
    }

    event LibraryRegistered(address newLib);
    event DefaultSendLibrarySet(uint32 eid, address newLib);
    event DefaultReceiveLibrarySet(uint32 eid, address newLib);
    event DefaultReceiveLibraryTimeoutSet(uint32 eid, address oldLib, uint256 expiry);
    event SendLibrarySet(address sender, uint32 eid, address newLib);
    event ReceiveLibrarySet(address receiver, uint32 eid, address newLib);
    event ReceiveLibraryTimeoutSet(address receiver, uint32 eid, address oldLib, uint256 timeout);

    function registerLibrary(address _lib) external;

    function isRegisteredLibrary(address _lib) external view returns (bool);

    function getRegisteredLibraries() external view returns (address[] memory);

    function setDefaultSendLibrary(uint32 _eid, address _newLib) external;

    function defaultSendLibrary(uint32 _eid) external view returns (address);

    function setDefaultReceiveLibrary(uint32 _eid, address _newLib, uint256 _gracePeriod) external;

    function defaultReceiveLibrary(uint32 _eid) external view returns (address);

    function setDefaultReceiveLibraryTimeout(uint32 _eid, address _lib, uint256 _expiry) external;

    function defaultReceiveLibraryTimeout(uint32 _eid) external view returns (address lib, uint256 expiry);

    function isSupportedEid(uint32 _eid) external view returns (bool);

    function isValidReceiveLibrary(address _receiver, uint32 _eid, address _lib) external view returns (bool);

    /// ------------------- OApp interfaces -------------------
    function setSendLibrary(address _oapp, uint32 _eid, address _newLib) external;

    function getSendLibrary(address _sender, uint32 _eid) external view returns (address lib);

    function isDefaultSendLibrary(address _sender, uint32 _eid) external view returns (bool);

    function setReceiveLibrary(address _oapp, uint32 _eid, address _newLib, uint256 _gracePeriod) external;

    function getReceiveLibrary(address _receiver, uint32 _eid) external view returns (address lib, bool isDefault);

    function setReceiveLibraryTimeout(address _oapp, uint32 _eid, address _lib, uint256 _expiry) external;

    function receiveLibraryTimeout(address _receiver, uint32 _eid) external view returns (address lib, uint256 expiry);

    function setConfig(address _oapp, address _lib, SetConfigParam[] calldata _params) external;

    function getConfig(
        address _oapp,
        address _lib,
        uint32 _eid,
        uint32 _configType
    ) external view returns (bytes memory config);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.8.0;

interface IMessagingChannel {
    event InboundNonceSkipped(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce);
    event PacketNilified(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce, bytes32 payloadHash);
    event PacketBurnt(uint32 srcEid, bytes32 sender, address receiver, uint64 nonce, bytes32 payloadHash);

    function eid() external view returns (uint32);

    // this is an emergency function if a message cannot be verified for some reasons
    // required to provide _nextNonce to avoid race condition
    function skip(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce) external;

    function nilify(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce, bytes32 _payloadHash) external;

    function burn(address _oapp, uint32 _srcEid, bytes32 _sender, uint64 _nonce, bytes32 _payloadHash) external;

    function nextGuid(address _sender, uint32 _dstEid, bytes32 _receiver) external view returns (bytes32);

    function inboundNonce(address _receiver, uint32 _srcEid, bytes32 _sender) external view returns (uint64);

    function outboundNonce(address _sender, uint32 _dstEid, bytes32 _receiver) external view returns (uint64);

    function inboundPayloadHash(
        address _receiver,
        uint32 _srcEid,
        bytes32 _sender,
        uint64 _nonce
    ) external view returns (bytes32);

    function lazyInboundNonce(address _receiver, uint32 _srcEid, bytes32 _sender) external view returns (uint64);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.8.0;

interface IMessagingComposer {
    event ComposeSent(address from, address to, bytes32 guid, uint16 index, bytes message);
    event ComposeDelivered(address from, address to, bytes32 guid, uint16 index);
    event LzComposeAlert(
        address indexed from,
        address indexed to,
        address indexed executor,
        bytes32 guid,
        uint16 index,
        uint256 gas,
        uint256 value,
        bytes message,
        bytes extraData,
        bytes reason
    );

    function composeQueue(
        address _from,
        address _to,
        bytes32 _guid,
        uint16 _index
    ) external view returns (bytes32 messageHash);

    function sendCompose(address _to, bytes32 _guid, uint16 _index, bytes calldata _message) external;

    function lzCompose(
        address _from,
        address _to,
        bytes32 _guid,
        uint16 _index,
        bytes calldata _message,
        bytes calldata _extraData
    ) external payable;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.8.0;

interface IMessagingContext {
    function isSendingMessage() external view returns (bool);

    function getSendContext() external view returns (uint32 dstEid, address sender);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {Context} from "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.22;

import { MessagingReceipt } from "@layerzerolabs/lz-evm-protocol-v2/contracts/interfaces/ILayerZeroEndpointV2.sol";

// solhint-disable-next-line no-unused-import
import { IDonate, Currency, Donation } from "../donate/IDonate.sol";

interface IClaim {
    // Custom Errors
    error AlreadyClaimed(address user);
    error InsufficientDonation(Currency currency, uint256 expectedAmount, uint256 actualAmount);
    error InvalidProof();
    error InvalidNativeStargate();
    error InvalidNativePrice();
    error OnlyDonateAndClaim();
    error DonateAndClaimAlreadySet();
    error WithdrawFailed();
    error MsgValueNotSupported();
    error InvalidToAddress();

    // Events
    event MerkleRootSet(bytes32 merkleRoot);
    event ZRORequested(address requester, uint256 zroAmount, address to);
    event DonateAndClaimSet(address donateAndClaim);
    event ZroWithdrawn(address to, uint256 amount);
    event NativeWithdrawn(address to, uint256 amount);

    // Functions
    function claim(
        Currency currency,
        uint256 zroAmount,
        bytes32[] calldata proof,
        address to,
        bytes calldata extraBytes
    ) external payable returns (MessagingReceipt memory receipt);

    function claim(
        address user,
        Currency currency,
        uint256 zroAmount,
        bytes32[] calldata proof,
        address to,
        bytes calldata extraBytes
    ) external payable returns (MessagingReceipt memory receipt);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.22;

enum Currency {
    USDC,
    USDT,
    Native
}

struct Donation {
    uint256 usdc;
    uint256 usdt;
    uint256 native;
}

interface IDonate {
    // Custom Errors
    error InsufficientMsgValue();
    error InsufficientBalance();
    error UnsupportedCurrency(Currency currency);
    error WithdrawDonationFailed();
    error InvalidNativeStargate();
    error InvalidDonationReceiver();
    error UnexpectedMsgValue();

    // Events
    event Donated(Currency currency, address from, address beneficiary, uint256 amount);
    event DonationWithdrawn(Currency currency, address to, uint256 amount);

    // Functions
    function getDonation(address user) external view returns (Donation memory donation);
    function withdrawDonation(Currency currency, uint256 minAmount) external payable;
    function donate(Currency currency, uint256 amount, address beneficiary) external payable;
}

{
  "evmVersion": "paris",
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_donateContract","type":"address"},{"internalType":"address","name":"_claimContract","type":"address"},{"internalType":"address","name":"_stargateUsdc","type":"address"},{"internalType":"address","name":"_stargateUsdt","type":"address"},{"internalType":"address","name":"_stargateNative","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"AddressEmptyCode","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"AddressInsufficientBalance","type":"error"},{"inputs":[],"name":"FailedInnerCall","type":"error"},{"inputs":[],"name":"InsufficientMsgValue","type":"error"},{"inputs":[],"name":"InvalidNativeStargate","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"SafeERC20FailedOperation","type":"error"},{"inputs":[{"internalType":"enum Currency","name":"currency","type":"uint8"}],"name":"UnsupportedCurrency","type":"error"},{"inputs":[],"name":"claimContract","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"enum Currency","name":"currency","type":"uint8"},{"internalType":"uint256","name":"amountToDonate","type":"uint256"},{"internalType":"uint256","name":"_zroAmount","type":"uint256"},{"internalType":"bytes32[]","name":"_proof","type":"bytes32[]"},{"internalType":"address","name":"_to","type":"address"},{"internalType":"bytes","name":"_extraBytes","type":"bytes"}],"name":"donateAndClaim","outputs":[{"components":[{"internalType":"bytes32","name":"guid","type":"bytes32"},{"internalType":"uint64","name":"nonce","type":"uint64"},{"components":[{"internalType":"uint256","name":"nativeFee","type":"uint256"},{"internalType":"uint256","name":"lzTokenFee","type":"uint256"}],"internalType":"struct MessagingFee","name":"fee","type":"tuple"}],"internalType":"struct MessagingReceipt","name":"receipt","type":"tuple"}],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"donateContract","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"stargateNative","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"stargateUsdc","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"stargateUsdt","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"tokenUsdc","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"tokenUsdt","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"}]

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

00000000000000000000000035644a949d2eeb4b5e592f13166aafd330645cf60000000000000000000000003ef4abdb646976c096df532377efdfe0e6391ac3000000000000000000000000c026395860db2d07ee33e05fe50ed7bd583189c7000000000000000000000000933597a323eb81cae705c5bc29985172fd5a397300000000000000000000000077b2043768d28e9c9ab44e1abfc95944bce57931

-----Decoded View---------------
Arg [0] : _donateContract (address): 0x35644a949D2Eeb4b5e592f13166AafD330645Cf6
Arg [1] : _claimContract (address): 0x3Ef4abDb646976c096DF532377EFdfE0E6391ac3
Arg [2] : _stargateUsdc (address): 0xc026395860Db2d07ee33e05fE50ed7bD583189C7
Arg [3] : _stargateUsdt (address): 0x933597a323Eb81cAe705C5bC29985172fd5A3973
Arg [4] : _stargateNative (address): 0x77b2043768d28E9C9aB44E1aBfC95944bcE57931

-----Encoded View---------------
5 Constructor Arguments found :
Arg [0] : 00000000000000000000000035644a949d2eeb4b5e592f13166aafd330645cf6
Arg [1] : 0000000000000000000000003ef4abdb646976c096df532377efdfe0e6391ac3
Arg [2] : 000000000000000000000000c026395860db2d07ee33e05fe50ed7bd583189c7
Arg [3] : 000000000000000000000000933597a323eb81cae705c5bc29985172fd5a3973
Arg [4] : 00000000000000000000000077b2043768d28e9c9ab44e1abfc95944bce57931