Overview
ETH Balance
0 ETH
Eth Value
$0.00More Info
Private Name Tags
ContractCreator
Latest 1 from a total of 1 transactions
Transaction Hash |
Method
|
Block
|
From
|
To
|
Value | ||||
---|---|---|---|---|---|---|---|---|---|
0x60806040 | 16224610 | 560 days ago | IN | Create: AirdropFlashLoan | 0 ETH | 0.00799155 |
Loading...
Loading
Contract Name:
AirdropFlashLoan
Compiler Version
v0.8.17+commit.8df45f5f
Optimization Enabled:
Yes with 200 runs
Other Settings:
default evmVersion
Contract Source Code (Solidity Standard Json-Input format)
// SPDX-License-Identifier: BUSL-1.1 pragma solidity 0.8.17; import "@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol"; import "@openzeppelin/contracts/token/ERC721/IERC721.sol"; import "@openzeppelin/contracts/token/ERC1155/IERC1155.sol"; import "@openzeppelin/contracts/token/ERC721/utils/ERC721Holder.sol"; import "@openzeppelin/contracts/token/ERC1155/utils/ERC1155Holder.sol"; import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol"; import "@openzeppelin/contracts/utils/Address.sol"; import "@openzeppelin/contracts/security/ReentrancyGuard.sol"; /** * @title AirdropFlashLoan * @author NFTfi * @dev */ contract AirdropFlashLoan is ERC721Holder, ERC1155Holder, ReentrancyGuard { using Address for address; using SafeERC20 for IERC20; /** * @notice this function initiates a flashloan to pull an airdrop from a tartget contract * * @param _nftContract - contract address of the target nft of the drop * @param _nftId - id of the target nft of the drop * @param _target - address of the airdropping contract * @param _data - function selector to be called on the airdropping contract * @param _nftAirdrop - address of the used claiming nft in the drop * @param _nftAirdropId - id of the used claiming nft in the drop * @param _is1155 - * @param _nftAirdropAmount - amount in case of 1155 * @param _beneficiary - address receiving the drop */ function pullAirdrop( address _nftContract, uint256 _nftId, address _target, bytes calldata _data, address _nftAirdrop, uint256 _nftAirdropId, bool _is1155, uint256 _nftAirdropAmount, address _beneficiary ) external nonReentrant { // assumes that the collateral nft has been transferreded to this contract before calling this function _target.functionCall(_data); // return the collateral IERC721(_nftContract).approve(msg.sender, _nftId); // in case that arbitray function from _target does not send the airdrop to a specified address if (_nftAirdrop != address(0) && _beneficiary != address(0)) { // send the airdrop to the beneficiary if (_is1155) { IERC1155(_nftAirdrop).safeTransferFrom( address(this), _beneficiary, _nftAirdropId, _nftAirdropAmount, "0x" ); } else { IERC721(_nftAirdrop).safeTransferFrom(address(this), _beneficiary, _nftAirdropId); } } } /** * @dev See {IERC165-supportsInterface}. */ function supportsInterface(bytes4 _interfaceId) public view virtual override(ERC1155Receiver) returns (bool) { return _interfaceId == type(IERC721Receiver).interfaceId || super.supportsInterface(_interfaceId); } }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.0; /** * @title ERC721 token receiver interface * @dev Interface for any contract that wants to support safeTransfers * from ERC721 asset contracts. */ interface IERC721Receiver { /** * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom} * by `operator` from `from`, this function is called. * * It must return its Solidity selector to confirm the token transfer. * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted. * * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`. */ function onERC721Received( address operator, address from, uint256 tokenId, bytes calldata data ) external returns (bytes4); }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.0; import "../../utils/introspection/IERC165.sol"; /** * @dev Required interface of an ERC721 compliant contract. */ interface IERC721 is IERC165 { /** * @dev Emitted when `tokenId` token is transferred from `from` to `to`. */ event Transfer(address indexed from, address indexed to, uint256 indexed tokenId); /** * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token. */ event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId); /** * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets. */ event ApprovalForAll(address indexed owner, address indexed operator, bool approved); /** * @dev Returns the number of tokens in ``owner``'s account. */ function balanceOf(address owner) external view returns (uint256 balance); /** * @dev Returns the owner of the `tokenId` token. * * Requirements: * * - `tokenId` must exist. */ function ownerOf(uint256 tokenId) external view returns (address owner); /** * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients * are aware of the ERC721 protocol to prevent tokens from being forever locked. * * Requirements: * * - `from` cannot be the zero address. * - `to` cannot be the zero address. * - `tokenId` token must exist and be owned by `from`. * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}. * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer. * * Emits a {Transfer} event. */ function safeTransferFrom( address from, address to, uint256 tokenId ) external; /** * @dev Transfers `tokenId` token from `from` to `to`. * * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible. * * Requirements: * * - `from` cannot be the zero address. * - `to` cannot be the zero address. * - `tokenId` token must be owned by `from`. * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}. * * Emits a {Transfer} event. */ function transferFrom( address from, address to, uint256 tokenId ) external; /** * @dev Gives permission to `to` to transfer `tokenId` token to another account. * The approval is cleared when the token is transferred. * * Only a single account can be approved at a time, so approving the zero address clears previous approvals. * * Requirements: * * - The caller must own the token or be an approved operator. * - `tokenId` must exist. * * Emits an {Approval} event. */ function approve(address to, uint256 tokenId) external; /** * @dev Returns the account approved for `tokenId` token. * * Requirements: * * - `tokenId` must exist. */ function getApproved(uint256 tokenId) external view returns (address operator); /** * @dev Approve or remove `operator` as an operator for the caller. * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller. * * Requirements: * * - The `operator` cannot be the caller. * * Emits an {ApprovalForAll} event. */ function setApprovalForAll(address operator, bool _approved) external; /** * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`. * * See {setApprovalForAll} */ function isApprovedForAll(address owner, address operator) external view returns (bool); /** * @dev Safely transfers `tokenId` token from `from` to `to`. * * Requirements: * * - `from` cannot be the zero address. * - `to` cannot be the zero address. * - `tokenId` token must exist and be owned by `from`. * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}. * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer. * * Emits a {Transfer} event. */ function safeTransferFrom( address from, address to, uint256 tokenId, bytes calldata data ) external; }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.0; import "../../utils/introspection/IERC165.sol"; /** * @dev Required interface of an ERC1155 compliant contract, as defined in the * https://eips.ethereum.org/EIPS/eip-1155[EIP]. * * _Available since v3.1._ */ interface IERC1155 is IERC165 { /** * @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`. */ event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value); /** * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all * transfers. */ event TransferBatch( address indexed operator, address indexed from, address indexed to, uint256[] ids, uint256[] values ); /** * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to * `approved`. */ event ApprovalForAll(address indexed account, address indexed operator, bool approved); /** * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI. * * If an {URI} event was emitted for `id`, the standard * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value * returned by {IERC1155MetadataURI-uri}. */ event URI(string value, uint256 indexed id); /** * @dev Returns the amount of tokens of token type `id` owned by `account`. * * Requirements: * * - `account` cannot be the zero address. */ function balanceOf(address account, uint256 id) external view returns (uint256); /** * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}. * * Requirements: * * - `accounts` and `ids` must have the same length. */ function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids) external view returns (uint256[] memory); /** * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`, * * Emits an {ApprovalForAll} event. * * Requirements: * * - `operator` cannot be the caller. */ function setApprovalForAll(address operator, bool approved) external; /** * @dev Returns true if `operator` is approved to transfer ``account``'s tokens. * * See {setApprovalForAll}. */ function isApprovedForAll(address account, address operator) external view returns (bool); /** * @dev Transfers `amount` tokens of token type `id` from `from` to `to`. * * Emits a {TransferSingle} event. * * Requirements: * * - `to` cannot be the zero address. * - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}. * - `from` must have a balance of tokens of type `id` of at least `amount`. * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the * acceptance magic value. */ function safeTransferFrom( address from, address to, uint256 id, uint256 amount, bytes calldata data ) external; /** * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}. * * Emits a {TransferBatch} event. * * Requirements: * * - `ids` and `amounts` must have the same length. * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the * acceptance magic value. */ function safeBatchTransferFrom( address from, address to, uint256[] calldata ids, uint256[] calldata amounts, bytes calldata data ) external; }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.0; import "../IERC721Receiver.sol"; /** * @dev Implementation of the {IERC721Receiver} interface. * * Accepts all token transfers. * Make sure the contract is able to use its token with {IERC721-safeTransferFrom}, {IERC721-approve} or {IERC721-setApprovalForAll}. */ contract ERC721Holder is IERC721Receiver { /** * @dev See {IERC721Receiver-onERC721Received}. * * Always returns `IERC721Receiver.onERC721Received.selector`. */ function onERC721Received( address, address, uint256, bytes memory ) public virtual override returns (bytes4) { return this.onERC721Received.selector; } }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.0; import "./ERC1155Receiver.sol"; /** * @dev _Available since v3.1._ */ contract ERC1155Holder is ERC1155Receiver { function onERC1155Received( address, address, uint256, uint256, bytes memory ) public virtual override returns (bytes4) { return this.onERC1155Received.selector; } function onERC1155BatchReceived( address, address, uint256[] memory, uint256[] memory, bytes memory ) public virtual override returns (bytes4) { return this.onERC1155BatchReceived.selector; } }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.0; import "../IERC20.sol"; import "../../../utils/Address.sol"; /** * @title SafeERC20 * @dev Wrappers around ERC20 operations that throw on failure (when the token * contract returns false). Tokens that return no value (and instead revert or * throw on failure) are also supported, non-reverting calls are assumed to be * successful. * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract, * which allows you to call the safe operations as `token.safeTransfer(...)`, etc. */ library SafeERC20 { using Address for address; function safeTransfer( IERC20 token, address to, uint256 value ) internal { _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value)); } function safeTransferFrom( IERC20 token, address from, address to, uint256 value ) internal { _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value)); } /** * @dev Deprecated. This function has issues similar to the ones found in * {IERC20-approve}, and its usage is discouraged. * * Whenever possible, use {safeIncreaseAllowance} and * {safeDecreaseAllowance} instead. */ function safeApprove( IERC20 token, address spender, uint256 value ) internal { // safeApprove should only be called when setting an initial allowance, // or when resetting it to zero. To increase and decrease it, use // 'safeIncreaseAllowance' and 'safeDecreaseAllowance' require( (value == 0) || (token.allowance(address(this), spender) == 0), "SafeERC20: approve from non-zero to non-zero allowance" ); _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value)); } function safeIncreaseAllowance( IERC20 token, address spender, uint256 value ) internal { uint256 newAllowance = token.allowance(address(this), spender) + value; _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance)); } function safeDecreaseAllowance( IERC20 token, address spender, uint256 value ) internal { unchecked { uint256 oldAllowance = token.allowance(address(this), spender); require(oldAllowance >= value, "SafeERC20: decreased allowance below zero"); uint256 newAllowance = oldAllowance - value; _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance)); } } /** * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement * on the return value: the return value is optional (but if data is returned, it must not be false). * @param token The token targeted by the call. * @param data The call data (encoded using abi.encode or one of its variants). */ function _callOptionalReturn(IERC20 token, bytes memory data) private { // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that // the target address contains contract code and also asserts for success in the low-level call. bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed"); if (returndata.length > 0) { // Return data is optional require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed"); } } }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.0; /** * @dev Collection of functions related to the address type */ library Address { /** * @dev Returns true if `account` is a contract. * * [IMPORTANT] * ==== * It is unsafe to assume that an address for which this function returns * false is an externally-owned account (EOA) and not a contract. * * Among others, `isContract` will return false for the following * types of addresses: * * - an externally-owned account * - a contract in construction * - an address where a contract will be created * - an address where a contract lived, but was destroyed * ==== */ function isContract(address account) internal view returns (bool) { // This method relies on extcodesize, which returns 0 for contracts in // construction, since the code is only stored at the end of the // constructor execution. uint256 size; assembly { size := extcodesize(account) } return size > 0; } /** * @dev Replacement for Solidity's `transfer`: sends `amount` wei to * `recipient`, forwarding all available gas and reverting on errors. * * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost * of certain opcodes, possibly making contracts go over the 2300 gas limit * imposed by `transfer`, making them unable to receive funds via * `transfer`. {sendValue} removes this limitation. * * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more]. * * IMPORTANT: because control is transferred to `recipient`, care must be * taken to not create reentrancy vulnerabilities. Consider using * {ReentrancyGuard} or the * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern]. */ function sendValue(address payable recipient, uint256 amount) internal { require(address(this).balance >= amount, "Address: insufficient balance"); (bool success, ) = recipient.call{value: amount}(""); require(success, "Address: unable to send value, recipient may have reverted"); } /** * @dev Performs a Solidity function call using a low level `call`. A * plain `call` is an unsafe replacement for a function call: use this * function instead. * * If `target` reverts with a revert reason, it is bubbled up by this * function (like regular Solidity function calls). * * Returns the raw returned data. To convert to the expected return value, * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`]. * * Requirements: * * - `target` must be a contract. * - calling `target` with `data` must not revert. * * _Available since v3.1._ */ function functionCall(address target, bytes memory data) internal returns (bytes memory) { return functionCall(target, data, "Address: low-level call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with * `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { return functionCallWithValue(target, data, 0, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but also transferring `value` wei to `target`. * * Requirements: * * - the calling contract must have an ETH balance of at least `value`. * - the called Solidity function must be `payable`. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value ) internal returns (bytes memory) { return functionCallWithValue(target, data, value, "Address: low-level call with value failed"); } /** * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but * with `errorMessage` as a fallback revert reason when `target` reverts. * * _Available since v3.1._ */ function functionCallWithValue( address target, bytes memory data, uint256 value, string memory errorMessage ) internal returns (bytes memory) { require(address(this).balance >= value, "Address: insufficient balance for call"); require(isContract(target), "Address: call to non-contract"); (bool success, bytes memory returndata) = target.call{value: value}(data); return _verifyCallResult(success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) { return functionStaticCall(target, data, "Address: low-level static call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a static call. * * _Available since v3.3._ */ function functionStaticCall( address target, bytes memory data, string memory errorMessage ) internal view returns (bytes memory) { require(isContract(target), "Address: static call to non-contract"); (bool success, bytes memory returndata) = target.staticcall(data); return _verifyCallResult(success, returndata, errorMessage); } /** * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], * but performing a delegate call. * * _Available since v3.4._ */ function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) { return functionDelegateCall(target, data, "Address: low-level delegate call failed"); } /** * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`], * but performing a delegate call. * * _Available since v3.4._ */ function functionDelegateCall( address target, bytes memory data, string memory errorMessage ) internal returns (bytes memory) { require(isContract(target), "Address: delegate call to non-contract"); (bool success, bytes memory returndata) = target.delegatecall(data); return _verifyCallResult(success, returndata, errorMessage); } function _verifyCallResult( bool success, bytes memory returndata, string memory errorMessage ) private pure returns (bytes memory) { if (success) { return returndata; } else { // Look for revert reason and bubble it up if present if (returndata.length > 0) { // The easiest way to bubble the revert reason is using memory via assembly assembly { let returndata_size := mload(returndata) revert(add(32, returndata), returndata_size) } } else { revert(errorMessage); } } } }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.0; /** * @dev Contract module that helps prevent reentrant calls to a function. * * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier * available, which can be applied to functions to make sure there are no nested * (reentrant) calls to them. * * Note that because there is a single `nonReentrant` guard, functions marked as * `nonReentrant` may not call one another. This can be worked around by making * those functions `private`, and then adding `external` `nonReentrant` entry * points to them. * * TIP: If you would like to learn more about reentrancy and alternative ways * to protect against it, check out our blog post * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul]. */ abstract contract ReentrancyGuard { // Booleans are more expensive than uint256 or any type that takes up a full // word because each write operation emits an extra SLOAD to first read the // slot's contents, replace the bits taken up by the boolean, and then write // back. This is the compiler's defense against contract upgrades and // pointer aliasing, and it cannot be disabled. // The values being non-zero value makes deployment a bit more expensive, // but in exchange the refund on every call to nonReentrant will be lower in // amount. Since refunds are capped to a percentage of the total // transaction's gas, it is best to keep them low in cases like this one, to // increase the likelihood of the full refund coming into effect. uint256 private constant _NOT_ENTERED = 1; uint256 private constant _ENTERED = 2; uint256 private _status; constructor() { _status = _NOT_ENTERED; } /** * @dev Prevents a contract from calling itself, directly or indirectly. * Calling a `nonReentrant` function from another `nonReentrant` * function is not supported. It is possible to prevent this from happening * by making the `nonReentrant` function external, and make it call a * `private` function that does the actual work. */ modifier nonReentrant() { // On the first call to nonReentrant, _notEntered will be true require(_status != _ENTERED, "ReentrancyGuard: reentrant call"); // Any calls to nonReentrant after this point will fail _status = _ENTERED; _; // By storing the original value once again, a refund is triggered (see // https://eips.ethereum.org/EIPS/eip-2200) _status = _NOT_ENTERED; } }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.0; /** * @dev Interface of the ERC165 standard, as defined in the * https://eips.ethereum.org/EIPS/eip-165[EIP]. * * Implementers can declare support of contract interfaces, which can then be * queried by others ({ERC165Checker}). * * For an implementation, see {ERC165}. */ interface IERC165 { /** * @dev Returns true if this contract implements the interface defined by * `interfaceId`. See the corresponding * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section] * to learn more about how these ids are created. * * This function call must use less than 30 000 gas. */ function supportsInterface(bytes4 interfaceId) external view returns (bool); }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.0; import "../IERC1155Receiver.sol"; import "../../../utils/introspection/ERC165.sol"; /** * @dev _Available since v3.1._ */ abstract contract ERC1155Receiver is ERC165, IERC1155Receiver { /** * @dev See {IERC165-supportsInterface}. */ function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) { return interfaceId == type(IERC1155Receiver).interfaceId || super.supportsInterface(interfaceId); } }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.0; import "../../utils/introspection/IERC165.sol"; /** * @dev _Available since v3.1._ */ interface IERC1155Receiver is IERC165 { /** @dev Handles the receipt of a single ERC1155 token type. This function is called at the end of a `safeTransferFrom` after the balance has been updated. To accept the transfer, this must return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` (i.e. 0xf23a6e61, or its own function selector). @param operator The address which initiated the transfer (i.e. msg.sender) @param from The address which previously owned the token @param id The ID of the token being transferred @param value The amount of tokens being transferred @param data Additional data with no specified format @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed */ function onERC1155Received( address operator, address from, uint256 id, uint256 value, bytes calldata data ) external returns (bytes4); /** @dev Handles the receipt of a multiple ERC1155 token types. This function is called at the end of a `safeBatchTransferFrom` after the balances have been updated. To accept the transfer(s), this must return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` (i.e. 0xbc197c81, or its own function selector). @param operator The address which initiated the batch transfer (i.e. msg.sender) @param from The address which previously owned the token @param ids An array containing ids of each token being transferred (order and length must match values array) @param values An array containing amounts of each token being transferred (order and length must match ids array) @param data Additional data with no specified format @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed */ function onERC1155BatchReceived( address operator, address from, uint256[] calldata ids, uint256[] calldata values, bytes calldata data ) external returns (bytes4); }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.0; import "./IERC165.sol"; /** * @dev Implementation of the {IERC165} interface. * * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check * for the additional interface id that will be supported. For example: * * ```solidity * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) { * return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId); * } * ``` * * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation. */ abstract contract ERC165 is IERC165 { /** * @dev See {IERC165-supportsInterface}. */ function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) { return interfaceId == type(IERC165).interfaceId; } }
// SPDX-License-Identifier: MIT pragma solidity ^0.8.0; /** * @dev Interface of the ERC20 standard as defined in the EIP. */ interface IERC20 { /** * @dev Returns the amount of tokens in existence. */ function totalSupply() external view returns (uint256); /** * @dev Returns the amount of tokens owned by `account`. */ function balanceOf(address account) external view returns (uint256); /** * @dev Moves `amount` tokens from the caller's account to `recipient`. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transfer(address recipient, uint256 amount) external returns (bool); /** * @dev Returns the remaining number of tokens that `spender` will be * allowed to spend on behalf of `owner` through {transferFrom}. This is * zero by default. * * This value changes when {approve} or {transferFrom} are called. */ function allowance(address owner, address spender) external view returns (uint256); /** * @dev Sets `amount` as the allowance of `spender` over the caller's tokens. * * Returns a boolean value indicating whether the operation succeeded. * * IMPORTANT: Beware that changing an allowance with this method brings the risk * that someone may use both the old and the new allowance by unfortunate * transaction ordering. One possible solution to mitigate this race * condition is to first reduce the spender's allowance to 0 and set the * desired value afterwards: * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729 * * Emits an {Approval} event. */ function approve(address spender, uint256 amount) external returns (bool); /** * @dev Moves `amount` tokens from `sender` to `recipient` using the * allowance mechanism. `amount` is then deducted from the caller's * allowance. * * Returns a boolean value indicating whether the operation succeeded. * * Emits a {Transfer} event. */ function transferFrom( address sender, address recipient, uint256 amount ) external returns (bool); /** * @dev Emitted when `value` tokens are moved from one account (`from`) to * another (`to`). * * Note that `value` may be zero. */ event Transfer(address indexed from, address indexed to, uint256 value); /** * @dev Emitted when the allowance of a `spender` for an `owner` is set by * a call to {approve}. `value` is the new allowance. */ event Approval(address indexed owner, address indexed spender, uint256 value); }
{ "metadata": { "bytecodeHash": "none", "useLiteralContent": true }, "optimizer": { "enabled": true, "runs": 200 }, "outputSelection": { "*": { "*": [ "evm.bytecode", "evm.deployedBytecode", "devdoc", "userdoc", "metadata", "abi" ] } }, "libraries": {} }
Contract Security Audit
- No Contract Security Audit Submitted- Submit Audit Here
[{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"","type":"address"},{"internalType":"uint256[]","name":"","type":"uint256[]"},{"internalType":"uint256[]","name":"","type":"uint256[]"},{"internalType":"bytes","name":"","type":"bytes"}],"name":"onERC1155BatchReceived","outputs":[{"internalType":"bytes4","name":"","type":"bytes4"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"","type":"address"},{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"bytes","name":"","type":"bytes"}],"name":"onERC1155Received","outputs":[{"internalType":"bytes4","name":"","type":"bytes4"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"","type":"address"},{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"bytes","name":"","type":"bytes"}],"name":"onERC721Received","outputs":[{"internalType":"bytes4","name":"","type":"bytes4"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_nftContract","type":"address"},{"internalType":"uint256","name":"_nftId","type":"uint256"},{"internalType":"address","name":"_target","type":"address"},{"internalType":"bytes","name":"_data","type":"bytes"},{"internalType":"address","name":"_nftAirdrop","type":"address"},{"internalType":"uint256","name":"_nftAirdropId","type":"uint256"},{"internalType":"bool","name":"_is1155","type":"bool"},{"internalType":"uint256","name":"_nftAirdropAmount","type":"uint256"},{"internalType":"address","name":"_beneficiary","type":"address"}],"name":"pullAirdrop","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"_interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"}]
Contract Creation Code
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
Deployed Bytecode
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
Loading...
Loading
Loading...
Loading
Multichain Portfolio | 26 Chains
Chain | Token | Portfolio % | Price | Amount | Value |
---|
Loading...
Loading
[ Download: CSV Export ]
A contract address hosts a smart contract, which is a set of code stored on the blockchain that runs when predetermined conditions are met. Learn more about addresses in our Knowledge Base.