Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Is this a proxy?
• Similar
• Sol2Uml
• Submit Audit
• Compare

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-utils/contracts/src/v06/LibBytesV06.sol";
import "./migrations/LibBootstrap.sol";
import "./features/Bootstrap.sol";
import "./storage/LibProxyStorage.sol";
import "./errors/LibProxyRichErrors.sol";


/// @dev An extensible proxy contract that serves as a universal entry point for
///      interacting with the 0x protocol.
contract ZeroEx {
    // solhint-disable separate-by-one-line-in-contract,indent,var-name-mixedcase
    using LibBytesV06 for bytes;

    /// @dev Construct this contract and register the `Bootstrap` feature.
    ///      After constructing this contract, `bootstrap()` should be called
    ///      to seed the initial feature set.
    constructor() public {
        // Temporarily create and register the bootstrap feature.
        // It will deregister itself after `bootstrap()` has been called.
        Bootstrap bootstrap = new Bootstrap(msg.sender);
        LibProxyStorage.getStorage().impls[bootstrap.bootstrap.selector] =
            address(bootstrap);
    }

    // solhint-disable state-visibility

    /// @dev Forwards calls to the appropriate implementation contract.
    fallback() external payable {
        bytes4 selector = msg.data.readBytes4(0);
        address impl = getFunctionImplementation(selector);
        if (impl == address(0)) {
            _revertWithData(LibProxyRichErrors.NotImplementedError(selector));
        }

        (bool success, bytes memory resultData) = impl.delegatecall(msg.data);
        if (!success) {
            _revertWithData(resultData);
        }
        _returnWithData(resultData);
    }

    /// @dev Fallback for just receiving ether.
    receive() external payable {}

    // solhint-enable state-visibility

    /// @dev Get the implementation contract of a registered function.
    /// @param selector The function selector.
    /// @return impl The implementation contract address.
    function getFunctionImplementation(bytes4 selector)
        public
        view
        returns (address impl)
    {
        return LibProxyStorage.getStorage().impls[selector];
    }

    /// @dev Revert with arbitrary bytes.
    /// @param data Revert data.
    function _revertWithData(bytes memory data) private pure {
        assembly { revert(add(data, 32), mload(data)) }
    }

    /// @dev Return with arbitrary bytes.
    /// @param data Return data.
    function _returnWithData(bytes memory data) private pure {
        assembly { return(add(data, 32), mload(data)) }
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;

import "./errors/LibBytesRichErrorsV06.sol";
import "./errors/LibRichErrorsV06.sol";


library LibBytesV06 {

    using LibBytesV06 for bytes;

    /// @dev Gets the memory address for a byte array.
    /// @param input Byte array to lookup.
    /// @return memoryAddress Memory address of byte array. This
    ///         points to the header of the byte array which contains
    ///         the length.
    function rawAddress(bytes memory input)
        internal
        pure
        returns (uint256 memoryAddress)
    {
        assembly {
            memoryAddress := input
        }
        return memoryAddress;
    }

    /// @dev Gets the memory address for the contents of a byte array.
    /// @param input Byte array to lookup.
    /// @return memoryAddress Memory address of the contents of the byte array.
    function contentAddress(bytes memory input)
        internal
        pure
        returns (uint256 memoryAddress)
    {
        assembly {
            memoryAddress := add(input, 32)
        }
        return memoryAddress;
    }

    /// @dev Copies `length` bytes from memory location `source` to `dest`.
    /// @param dest memory address to copy bytes to.
    /// @param source memory address to copy bytes from.
    /// @param length number of bytes to copy.
    function memCopy(
        uint256 dest,
        uint256 source,
        uint256 length
    )
        internal
        pure
    {
        if (length < 32) {
            // Handle a partial word by reading destination and masking
            // off the bits we are interested in.
            // This correctly handles overlap, zero lengths and source == dest
            assembly {
                let mask := sub(exp(256, sub(32, length)), 1)
                let s := and(mload(source), not(mask))
                let d := and(mload(dest), mask)
                mstore(dest, or(s, d))
            }
        } else {
            // Skip the O(length) loop when source == dest.
            if (source == dest) {
                return;
            }

            // For large copies we copy whole words at a time. The final
            // word is aligned to the end of the range (instead of after the
            // previous) to handle partial words. So a copy will look like this:
            //
            //  ####
            //      ####
            //          ####
            //            ####
            //
            // We handle overlap in the source and destination range by
            // changing the copying direction. This prevents us from
            // overwriting parts of source that we still need to copy.
            //
            // This correctly handles source == dest
            //
            if (source > dest) {
                assembly {
                    // We subtract 32 from `sEnd` and `dEnd` because it
                    // is easier to compare with in the loop, and these
                    // are also the addresses we need for copying the
                    // last bytes.
                    length := sub(length, 32)
                    let sEnd := add(source, length)
                    let dEnd := add(dest, length)

                    // Remember the last 32 bytes of source
                    // This needs to be done here and not after the loop
                    // because we may have overwritten the last bytes in
                    // source already due to overlap.
                    let last := mload(sEnd)

                    // Copy whole words front to back
                    // Note: the first check is always true,
                    // this could have been a do-while loop.
                    // solhint-disable-next-line no-empty-blocks
                    for {} lt(source, sEnd) {} {
                        mstore(dest, mload(source))
                        source := add(source, 32)
                        dest := add(dest, 32)
                    }

                    // Write the last 32 bytes
                    mstore(dEnd, last)
                }
            } else {
                assembly {
                    // We subtract 32 from `sEnd` and `dEnd` because those
                    // are the starting points when copying a word at the end.
                    length := sub(length, 32)
                    let sEnd := add(source, length)
                    let dEnd := add(dest, length)

                    // Remember the first 32 bytes of source
                    // This needs to be done here and not after the loop
                    // because we may have overwritten the first bytes in
                    // source already due to overlap.
                    let first := mload(source)

                    // Copy whole words back to front
                    // We use a signed comparisson here to allow dEnd to become
                    // negative (happens when source and dest < 32). Valid
                    // addresses in local memory will never be larger than
                    // 2**255, so they can be safely re-interpreted as signed.
                    // Note: the first check is always true,
                    // this could have been a do-while loop.
                    // solhint-disable-next-line no-empty-blocks
                    for {} slt(dest, dEnd) {} {
                        mstore(dEnd, mload(sEnd))
                        sEnd := sub(sEnd, 32)
                        dEnd := sub(dEnd, 32)
                    }

                    // Write the first 32 bytes
                    mstore(dest, first)
                }
            }
        }
    }

    /// @dev Returns a slices from a byte array.
    /// @param b The byte array to take a slice from.
    /// @param from The starting index for the slice (inclusive).
    /// @param to The final index for the slice (exclusive).
    /// @return result The slice containing bytes at indices [from, to)
    function slice(
        bytes memory b,
        uint256 from,
        uint256 to
    )
        internal
        pure
        returns (bytes memory result)
    {
        // Ensure that the from and to positions are valid positions for a slice within
        // the byte array that is being used.
        if (from > to) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.FromLessThanOrEqualsToRequired,
                from,
                to
            ));
        }
        if (to > b.length) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.ToLessThanOrEqualsLengthRequired,
                to,
                b.length
            ));
        }

        // Create a new bytes structure and copy contents
        result = new bytes(to - from);
        memCopy(
            result.contentAddress(),
            b.contentAddress() + from,
            result.length
        );
        return result;
    }

    /// @dev Returns a slice from a byte array without preserving the input.
    ///      When `from == 0`, the original array will match the slice.
    ///      In other cases its state will be corrupted.
    /// @param b The byte array to take a slice from. Will be destroyed in the process.
    /// @param from The starting index for the slice (inclusive).
    /// @param to The final index for the slice (exclusive).
    /// @return result The slice containing bytes at indices [from, to)
    function sliceDestructive(
        bytes memory b,
        uint256 from,
        uint256 to
    )
        internal
        pure
        returns (bytes memory result)
    {
        // Ensure that the from and to positions are valid positions for a slice within
        // the byte array that is being used.
        if (from > to) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.FromLessThanOrEqualsToRequired,
                from,
                to
            ));
        }
        if (to > b.length) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.ToLessThanOrEqualsLengthRequired,
                to,
                b.length
            ));
        }

        // Create a new bytes structure around [from, to) in-place.
        assembly {
            result := add(b, from)
            mstore(result, sub(to, from))
        }
        return result;
    }

    /// @dev Pops the last byte off of a byte array by modifying its length.
    /// @param b Byte array that will be modified.
    /// @return result The byte that was popped off.
    function popLastByte(bytes memory b)
        internal
        pure
        returns (bytes1 result)
    {
        if (b.length == 0) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanZeroRequired,
                b.length,
                0
            ));
        }

        // Store last byte.
        result = b[b.length - 1];

        assembly {
            // Decrement length of byte array.
            let newLen := sub(mload(b), 1)
            mstore(b, newLen)
        }
        return result;
    }

    /// @dev Tests equality of two byte arrays.
    /// @param lhs First byte array to compare.
    /// @param rhs Second byte array to compare.
    /// @return equal True if arrays are the same. False otherwise.
    function equals(
        bytes memory lhs,
        bytes memory rhs
    )
        internal
        pure
        returns (bool equal)
    {
        // Keccak gas cost is 30 + numWords * 6. This is a cheap way to compare.
        // We early exit on unequal lengths, but keccak would also correctly
        // handle this.
        return lhs.length == rhs.length && keccak256(lhs) == keccak256(rhs);
    }

    /// @dev Reads an address from a position in a byte array.
    /// @param b Byte array containing an address.
    /// @param index Index in byte array of address.
    /// @return result address from byte array.
    function readAddress(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (address result)
    {
        if (b.length < index + 20) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsTwentyRequired,
                b.length,
                index + 20 // 20 is length of address
            ));
        }

        // Add offset to index:
        // 1. Arrays are prefixed by 32-byte length parameter (add 32 to index)
        // 2. Account for size difference between address length and 32-byte storage word (subtract 12 from index)
        index += 20;

        // Read address from array memory
        assembly {
            // 1. Add index to address of bytes array
            // 2. Load 32-byte word from memory
            // 3. Apply 20-byte mask to obtain address
            result := and(mload(add(b, index)), 0xffffffffffffffffffffffffffffffffffffffff)
        }
        return result;
    }

    /// @dev Writes an address into a specific position in a byte array.
    /// @param b Byte array to insert address into.
    /// @param index Index in byte array of address.
    /// @param input Address to put into byte array.
    function writeAddress(
        bytes memory b,
        uint256 index,
        address input
    )
        internal
        pure
    {
        if (b.length < index + 20) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsTwentyRequired,
                b.length,
                index + 20 // 20 is length of address
            ));
        }

        // Add offset to index:
        // 1. Arrays are prefixed by 32-byte length parameter (add 32 to index)
        // 2. Account for size difference between address length and 32-byte storage word (subtract 12 from index)
        index += 20;

        // Store address into array memory
        assembly {
            // The address occupies 20 bytes and mstore stores 32 bytes.
            // First fetch the 32-byte word where we'll be storing the address, then
            // apply a mask so we have only the bytes in the word that the address will not occupy.
            // Then combine these bytes with the address and store the 32 bytes back to memory with mstore.

            // 1. Add index to address of bytes array
            // 2. Load 32-byte word from memory
            // 3. Apply 12-byte mask to obtain extra bytes occupying word of memory where we'll store the address
            let neighbors := and(
                mload(add(b, index)),
                0xffffffffffffffffffffffff0000000000000000000000000000000000000000
            )

            // Make sure input address is clean.
            // (Solidity does not guarantee this)
            input := and(input, 0xffffffffffffffffffffffffffffffffffffffff)

            // Store the neighbors and address into memory
            mstore(add(b, index), xor(input, neighbors))
        }
    }

    /// @dev Reads a bytes32 value from a position in a byte array.
    /// @param b Byte array containing a bytes32 value.
    /// @param index Index in byte array of bytes32 value.
    /// @return result bytes32 value from byte array.
    function readBytes32(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (bytes32 result)
    {
        if (b.length < index + 32) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsThirtyTwoRequired,
                b.length,
                index + 32
            ));
        }

        // Arrays are prefixed by a 256 bit length parameter
        index += 32;

        // Read the bytes32 from array memory
        assembly {
            result := mload(add(b, index))
        }
        return result;
    }

    /// @dev Writes a bytes32 into a specific position in a byte array.
    /// @param b Byte array to insert <input> into.
    /// @param index Index in byte array of <input>.
    /// @param input bytes32 to put into byte array.
    function writeBytes32(
        bytes memory b,
        uint256 index,
        bytes32 input
    )
        internal
        pure
    {
        if (b.length < index + 32) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsThirtyTwoRequired,
                b.length,
                index + 32
            ));
        }

        // Arrays are prefixed by a 256 bit length parameter
        index += 32;

        // Read the bytes32 from array memory
        assembly {
            mstore(add(b, index), input)
        }
    }

    /// @dev Reads a uint256 value from a position in a byte array.
    /// @param b Byte array containing a uint256 value.
    /// @param index Index in byte array of uint256 value.
    /// @return result uint256 value from byte array.
    function readUint256(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (uint256 result)
    {
        result = uint256(readBytes32(b, index));
        return result;
    }

    /// @dev Writes a uint256 into a specific position in a byte array.
    /// @param b Byte array to insert <input> into.
    /// @param index Index in byte array of <input>.
    /// @param input uint256 to put into byte array.
    function writeUint256(
        bytes memory b,
        uint256 index,
        uint256 input
    )
        internal
        pure
    {
        writeBytes32(b, index, bytes32(input));
    }

    /// @dev Reads an unpadded bytes4 value from a position in a byte array.
    /// @param b Byte array containing a bytes4 value.
    /// @param index Index in byte array of bytes4 value.
    /// @return result bytes4 value from byte array.
    function readBytes4(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (bytes4 result)
    {
        if (b.length < index + 4) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsFourRequired,
                b.length,
                index + 4
            ));
        }

        // Arrays are prefixed by a 32 byte length field
        index += 32;

        // Read the bytes4 from array memory
        assembly {
            result := mload(add(b, index))
            // Solidity does not require us to clean the trailing bytes.
            // We do it anyway
            result := and(result, 0xFFFFFFFF00000000000000000000000000000000000000000000000000000000)
        }
        return result;
    }

    /// @dev Writes a new length to a byte array.
    ///      Decreasing length will lead to removing the corresponding lower order bytes from the byte array.
    ///      Increasing length may lead to appending adjacent in-memory bytes to the end of the byte array.
    /// @param b Bytes array to write new length to.
    /// @param length New length of byte array.
    function writeLength(bytes memory b, uint256 length)
        internal
        pure
    {
        assembly {
            mstore(b, length)
        }
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;


library LibBytesRichErrorsV06 {

    enum InvalidByteOperationErrorCodes {
        FromLessThanOrEqualsToRequired,
        ToLessThanOrEqualsLengthRequired,
        LengthGreaterThanZeroRequired,
        LengthGreaterThanOrEqualsFourRequired,
        LengthGreaterThanOrEqualsTwentyRequired,
        LengthGreaterThanOrEqualsThirtyTwoRequired,
        LengthGreaterThanOrEqualsNestedBytesLengthRequired,
        DestinationLengthGreaterThanOrEqualSourceLengthRequired
    }

    // bytes4(keccak256("InvalidByteOperationError(uint8,uint256,uint256)"))
    bytes4 internal constant INVALID_BYTE_OPERATION_ERROR_SELECTOR =
        0x28006595;

    // solhint-disable func-name-mixedcase
    function InvalidByteOperationError(
        InvalidByteOperationErrorCodes errorCode,
        uint256 offset,
        uint256 required
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            INVALID_BYTE_OPERATION_ERROR_SELECTOR,
            errorCode,
            offset,
            required
        );
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;


library LibRichErrorsV06 {

    // bytes4(keccak256("Error(string)"))
    bytes4 internal constant STANDARD_ERROR_SELECTOR = 0x08c379a0;

    // solhint-disable func-name-mixedcase
    /// @dev ABI encode a standard, string revert error payload.
    ///      This is the same payload that would be included by a `revert(string)`
    ///      solidity statement. It has the function signature `Error(string)`.
    /// @param message The error string.
    /// @return The ABI encoded error.
    function StandardError(string memory message)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            STANDARD_ERROR_SELECTOR,
            bytes(message)
        );
    }
    // solhint-enable func-name-mixedcase

    /// @dev Reverts an encoded rich revert reason `errorData`.
    /// @param errorData ABI encoded error data.
    function rrevert(bytes memory errorData)
        internal
        pure
    {
        assembly {
            revert(add(errorData, 0x20), mload(errorData))
        }
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../errors/LibProxyRichErrors.sol";


library LibBootstrap {

    /// @dev Magic bytes returned by the bootstrapper to indicate success.
    ///      This is `keccack('BOOTSTRAP_SUCCESS')`.
    bytes4 internal constant BOOTSTRAP_SUCCESS = 0xd150751b;

    using LibRichErrorsV06 for bytes;

    /// @dev Perform a delegatecall and ensure it returns the magic bytes.
    /// @param target The call target.
    /// @param data The call data.
    function delegatecallBootstrapFunction(
        address target,
        bytes memory data
    )
        internal
    {
        (bool success, bytes memory resultData) = target.delegatecall(data);
        if (!success ||
            resultData.length != 32 ||
            abi.decode(resultData, (bytes4)) != BOOTSTRAP_SUCCESS)
        {
            LibProxyRichErrors.BootstrapCallFailedError(target, resultData).rrevert();
        }
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;


library LibProxyRichErrors {

    // solhint-disable func-name-mixedcase

    function NotImplementedError(bytes4 selector)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("NotImplementedError(bytes4)")),
            selector
        );
    }

    function InvalidBootstrapCallerError(address actual, address expected)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InvalidBootstrapCallerError(address,address)")),
            actual,
            expected
        );
    }

    function InvalidDieCallerError(address actual, address expected)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InvalidDieCallerError(address,address)")),
            actual,
            expected
        );
    }

    function BootstrapCallFailedError(address target, bytes memory resultData)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("BootstrapCallFailedError(address,bytes)")),
            target,
            resultData
        );
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../migrations/LibBootstrap.sol";
import "../storage/LibProxyStorage.sol";
import "./IBootstrap.sol";


/// @dev Detachable `bootstrap()` feature.
contract Bootstrap is
    IBootstrap
{
    // solhint-disable state-visibility,indent
    /// @dev The ZeroEx contract.
    ///      This has to be immutable to persist across delegatecalls.
    address immutable private _deployer;
    /// @dev The implementation address of this contract.
    ///      This has to be immutable to persist across delegatecalls.
    address immutable private _implementation;
    /// @dev The deployer.
    ///      This has to be immutable to persist across delegatecalls.
    address immutable private _bootstrapCaller;
    // solhint-enable state-visibility,indent

    using LibRichErrorsV06 for bytes;

    /// @dev Construct this contract and set the bootstrap migration contract.
    ///      After constructing this contract, `bootstrap()` should be called
    ///      to seed the initial feature set.
    /// @param bootstrapCaller The allowed caller of `bootstrap()`.
    constructor(address bootstrapCaller) public {
        _deployer = msg.sender;
        _implementation = address(this);
        _bootstrapCaller = bootstrapCaller;
    }

    /// @dev Bootstrap the initial feature set of this contract by delegatecalling
    ///      into `target`. Before exiting the `bootstrap()` function will
    ///      deregister itself from the proxy to prevent being called again.
    /// @param target The bootstrapper contract address.
    /// @param callData The call data to execute on `target`.
    function bootstrap(address target, bytes calldata callData) external override {
        // Only the bootstrap caller can call this function.
        if (msg.sender != _bootstrapCaller) {
            LibProxyRichErrors.InvalidBootstrapCallerError(
                msg.sender,
                _bootstrapCaller
            ).rrevert();
        }
        // Deregister.
        LibProxyStorage.getStorage().impls[this.bootstrap.selector] = address(0);
        // Self-destruct.
        Bootstrap(_implementation).die();
        // Call the bootstrapper.
        LibBootstrap.delegatecallBootstrapFunction(target, callData);
    }

    /// @dev Self-destructs this contract.
    ///      Can only be called by the deployer.
    function die() external {
        if (msg.sender != _deployer) {
            LibProxyRichErrors.InvalidDieCallerError(msg.sender, _deployer).rrevert();
        }
        selfdestruct(msg.sender);
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "./LibStorage.sol";


/// @dev Storage helpers for the proxy contract.
library LibProxyStorage {

    /// @dev Storage bucket for proxy contract.
    struct Storage {
        // Mapping of function selector -> function implementation
        mapping(bytes4 => address) impls;
        // The owner of the proxy contract.
        address owner;
    }

    /// @dev Get the storage bucket for this contract.
    function getStorage() internal pure returns (Storage storage stor) {
        uint256 storageSlot = LibStorage.getStorageSlot(
            LibStorage.StorageId.Proxy
        );
        // Dip into assembly to change the slot pointed to by the local
        // variable `stor`.
        // See https://solidity.readthedocs.io/en/v0.6.8/assembly.html?highlight=slot#access-to-external-variables-functions-and-libraries
        assembly { stor_slot := storageSlot }
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;


/// @dev Common storage helpers
library LibStorage {

    /// @dev What to bit-shift a storage ID by to get its slot.
    ///      This gives us a maximum of 2**128 inline fields in each bucket.
    uint256 private constant STORAGE_SLOT_EXP = 128;

    /// @dev Storage IDs for feature storage buckets.
    ///      WARNING: APPEND-ONLY.
    enum StorageId {
        Proxy,
        SimpleFunctionRegistry,
        Ownable,
        TokenSpender,
        TransformERC20
    }

    /// @dev Get the storage slot given a storage ID. We assign unique, well-spaced
    ///     slots to storage bucket variables to ensure they do not overlap.
    ///     See: https://solidity.readthedocs.io/en/v0.6.6/assembly.html#access-to-external-variables-functions-and-libraries
    /// @param storageId An entry in `StorageId`
    /// @return slot The storage slot.
    function getStorageSlot(StorageId storageId)
        internal
        pure
        returns (uint256 slot)
    {
        // This should never overflow with a reasonable `STORAGE_SLOT_EXP`
        // because Solidity will do a range check on `storageId` during the cast.
        return (uint256(storageId) + 1) << STORAGE_SLOT_EXP;
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;


/// @dev Detachable `bootstrap()` feature.
interface IBootstrap {

    /// @dev Bootstrap the initial feature set of this contract by delegatecalling
    ///      into `target`. Before exiting the `bootstrap()` function will
    ///      deregister itself from the proxy to prevent being called again.
    /// @param target The bootstrapper contract address.
    /// @param callData The call data to execute on `target`.
    function bootstrap(address target, bytes calldata callData) external;
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;


library LibCommonRichErrors {

    // solhint-disable func-name-mixedcase

    function OnlyCallableBySelfError(address sender)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("OnlyCallableBySelfError(address)")),
            sender
        );
    }

    function IllegalReentrancyError()
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("IllegalReentrancyError()"))
        );
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;


library LibOwnableRichErrors {

    // solhint-disable func-name-mixedcase

    function OnlyOwnerError(
        address sender,
        address owner
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("OnlyOwnerError(address,address)")),
            sender,
            owner
        );
    }

    function TransferOwnerToZeroError()
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("TransferOwnerToZeroError()"))
        );
    }

    function MigrateCallFailedError(address target, bytes memory resultData)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("MigrateCallFailedError(address,bytes)")),
            target,
            resultData
        );
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;


library LibSimpleFunctionRegistryRichErrors {

    // solhint-disable func-name-mixedcase

    function NotInRollbackHistoryError(bytes4 selector, address targetImpl)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("NotInRollbackHistoryError(bytes4,address)")),
            selector,
            targetImpl
        );
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;


library LibSpenderRichErrors {

    // solhint-disable func-name-mixedcase

    function SpenderERC20TransferFromFailedError(
        address token,
        address owner,
        address to,
        uint256 amount,
        bytes memory errorData
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("SpenderERC20TransferFromFailedError(address,address,address,uint256,bytes)")),
            token,
            owner,
            to,
            amount,
            errorData
        );
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;


library LibTransformERC20RichErrors {

    // solhint-disable func-name-mixedcase,separate-by-one-line-in-contract

    function InsufficientEthAttachedError(
        uint256 ethAttached,
        uint256 ethNeeded
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InsufficientEthAttachedError(uint256,uint256)")),
            ethAttached,
            ethNeeded
        );
    }

    function IncompleteTransformERC20Error(
        address outputToken,
        uint256 outputTokenAmount,
        uint256 minOutputTokenAmount
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("IncompleteTransformERC20Error(address,uint256,uint256)")),
            outputToken,
            outputTokenAmount,
            minOutputTokenAmount
        );
    }

    function NegativeTransformERC20OutputError(
        address outputToken,
        uint256 outputTokenLostAmount
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("NegativeTransformERC20OutputError(address,uint256)")),
            outputToken,
            outputTokenLostAmount
        );
    }

    function TransformerFailedError(
        address transformer,
        bytes memory transformerData,
        bytes memory resultData
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("TransformerFailedError(address,bytes,bytes)")),
            transformer,
            transformerData,
            resultData
        );
    }

    // Common Transformer errors ///////////////////////////////////////////////

    function OnlyCallableByDeployerError(
        address caller,
        address deployer
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("OnlyCallableByDeployerError(address,address)")),
            caller,
            deployer
        );
    }

    function InvalidExecutionContextError(
        address actualContext,
        address expectedContext
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InvalidExecutionContextError(address,address)")),
            actualContext,
            expectedContext
        );
    }

    enum InvalidTransformDataErrorCode {
        INVALID_TOKENS,
        INVALID_ARRAY_LENGTH
    }

    function InvalidTransformDataError(
        InvalidTransformDataErrorCode errorCode,
        bytes memory transformData
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InvalidTransformDataError(uint8,bytes)")),
            errorCode,
            transformData
        );
    }

    // FillQuoteTransformer errors /////////////////////////////////////////////

    function IncompleteFillSellQuoteError(
        address sellToken,
        uint256 soldAmount,
        uint256 sellAmount
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("IncompleteFillSellQuoteError(address,uint256,uint256)")),
            sellToken,
            soldAmount,
            sellAmount
        );
    }

    function IncompleteFillBuyQuoteError(
        address buyToken,
        uint256 boughtAmount,
        uint256 buyAmount
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("IncompleteFillBuyQuoteError(address,uint256,uint256)")),
            buyToken,
            boughtAmount,
            buyAmount
        );
    }

    function InsufficientTakerTokenError(
        uint256 tokenBalance,
        uint256 tokensNeeded
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InsufficientTakerTokenError(uint256,uint256)")),
            tokenBalance,
            tokensNeeded
        );
    }

    function InsufficientProtocolFeeError(
        uint256 ethBalance,
        uint256 ethNeeded
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InsufficientProtocolFeeError(uint256,uint256)")),
            ethBalance,
            ethNeeded
        );
    }

    function InvalidERC20AssetDataError(
        bytes memory assetData
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InvalidERC20AssetDataError(bytes)")),
            assetData
        );
    }

    function InvalidTakerFeeTokenError(
        address token
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InvalidTakerFeeTokenError(address)")),
            token
        );
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;


library LibWalletRichErrors {

    // solhint-disable func-name-mixedcase

    function WalletExecuteCallFailedError(
        address wallet,
        address callTarget,
        bytes memory callData,
        uint256 callValue,
        bytes memory errorData
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("WalletExecuteCallFailedError(address,address,bytes,uint256,bytes)")),
            wallet,
            callTarget,
            callData,
            callValue,
            errorData
        );
    }

    function WalletExecuteDelegateCallFailedError(
        address wallet,
        address callTarget,
        bytes memory callData,
        bytes memory errorData
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("WalletExecuteDelegateCallFailedError(address,address,bytes,bytes)")),
            wallet,
            callTarget,
            callData,
            errorData
        );
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-utils/contracts/src/v06/AuthorizableV06.sol";
import "../errors/LibSpenderRichErrors.sol";
import "./IAllowanceTarget.sol";


/// @dev The allowance target for the TokenSpender feature.
contract AllowanceTarget is
    IAllowanceTarget,
    AuthorizableV06
{
    // solhint-disable no-unused-vars,indent,no-empty-blocks
    using LibRichErrorsV06 for bytes;

    /// @dev Execute an arbitrary call. Only an authority can call this.
    /// @param target The call target.
    /// @param callData The call data.
    /// @return resultData The data returned by the call.
    function executeCall(
        address payable target,
        bytes calldata callData
    )
        external
        override
        onlyAuthorized
        returns (bytes memory resultData)
    {
        bool success;
        (success, resultData) = target.call(callData);
        if (!success) {
            resultData.rrevert();
        }
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;

import "./interfaces/IAuthorizableV06.sol";
import "./errors/LibRichErrorsV06.sol";
import "./errors/LibAuthorizableRichErrorsV06.sol";
import "./OwnableV06.sol";


// solhint-disable no-empty-blocks
contract AuthorizableV06 is
    OwnableV06,
    IAuthorizableV06
{
    /// @dev Only authorized addresses can invoke functions with this modifier.
    modifier onlyAuthorized {
        _assertSenderIsAuthorized();
        _;
    }

    // @dev Whether an address is authorized to call privileged functions.
    // @param 0 Address to query.
    // @return 0 Whether the address is authorized.
    mapping (address => bool) public override authorized;
    // @dev Whether an address is authorized to call privileged functions.
    // @param 0 Index of authorized address.
    // @return 0 Authorized address.
    address[] public override authorities;

    /// @dev Initializes the `owner` address.
    constructor()
        public
        OwnableV06()
    {}

    /// @dev Authorizes an address.
    /// @param target Address to authorize.
    function addAuthorizedAddress(address target)
        external
        override
        onlyOwner
    {
        _addAuthorizedAddress(target);
    }

    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    function removeAuthorizedAddress(address target)
        external
        override
        onlyOwner
    {
        if (!authorized[target]) {
            LibRichErrorsV06.rrevert(LibAuthorizableRichErrorsV06.TargetNotAuthorizedError(target));
        }
        for (uint256 i = 0; i < authorities.length; i++) {
            if (authorities[i] == target) {
                _removeAuthorizedAddressAtIndex(target, i);
                break;
            }
        }
    }

    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    /// @param index Index of target in authorities array.
    function removeAuthorizedAddressAtIndex(
        address target,
        uint256 index
    )
        external
        override
        onlyOwner
    {
        _removeAuthorizedAddressAtIndex(target, index);
    }

    /// @dev Gets all authorized addresses.
    /// @return Array of authorized addresses.
    function getAuthorizedAddresses()
        external
        override
        view
        returns (address[] memory)
    {
        return authorities;
    }

    /// @dev Reverts if msg.sender is not authorized.
    function _assertSenderIsAuthorized()
        internal
        view
    {
        if (!authorized[msg.sender]) {
            LibRichErrorsV06.rrevert(LibAuthorizableRichErrorsV06.SenderNotAuthorizedError(msg.sender));
        }
    }

    /// @dev Authorizes an address.
    /// @param target Address to authorize.
    function _addAuthorizedAddress(address target)
        internal
    {
        // Ensure that the target is not the zero address.
        if (target == address(0)) {
            LibRichErrorsV06.rrevert(LibAuthorizableRichErrorsV06.ZeroCantBeAuthorizedError());
        }

        // Ensure that the target is not already authorized.
        if (authorized[target]) {
            LibRichErrorsV06.rrevert(LibAuthorizableRichErrorsV06.TargetAlreadyAuthorizedError(target));
        }

        authorized[target] = true;
        authorities.push(target);
        emit AuthorizedAddressAdded(target, msg.sender);
    }

    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    /// @param index Index of target in authorities array.
    function _removeAuthorizedAddressAtIndex(
        address target,
        uint256 index
    )
        internal
    {
        if (!authorized[target]) {
            LibRichErrorsV06.rrevert(LibAuthorizableRichErrorsV06.TargetNotAuthorizedError(target));
        }
        if (index >= authorities.length) {
            LibRichErrorsV06.rrevert(LibAuthorizableRichErrorsV06.IndexOutOfBoundsError(
                index,
                authorities.length
            ));
        }
        if (authorities[index] != target) {
            LibRichErrorsV06.rrevert(LibAuthorizableRichErrorsV06.AuthorizedAddressMismatchError(
                authorities[index],
                target
            ));
        }

        delete authorized[target];
        authorities[index] = authorities[authorities.length - 1];
        authorities.pop();
        emit AuthorizedAddressRemoved(target, msg.sender);
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;

import "./IOwnableV06.sol";


interface IAuthorizableV06 is
    IOwnableV06
{
    // Event logged when a new address is authorized.
    event AuthorizedAddressAdded(
        address indexed target,
        address indexed caller
    );

    // Event logged when a currently authorized address is unauthorized.
    event AuthorizedAddressRemoved(
        address indexed target,
        address indexed caller
    );

    /// @dev Authorizes an address.
    /// @param target Address to authorize.
    function addAuthorizedAddress(address target)
        external;

    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    function removeAuthorizedAddress(address target)
        external;

    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    /// @param index Index of target in authorities array.
    function removeAuthorizedAddressAtIndex(
        address target,
        uint256 index
    )
        external;

    /// @dev Gets all authorized addresses.
    /// @return authorizedAddresses Array of authorized addresses.
    function getAuthorizedAddresses()
        external
        view
        returns (address[] memory authorizedAddresses);

    /// @dev Whether an adderss is authorized to call privileged functions.
    /// @param addr Address to query.
    /// @return isAuthorized Whether the address is authorized.
    function authorized(address addr) external view returns (bool isAuthorized);

    /// @dev All addresseses authorized to call privileged functions.
    /// @param idx Index of authorized address.
    /// @return addr Authorized address.
    function authorities(uint256 idx) external view returns (address addr);

}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;


interface IOwnableV06 {

    /// @dev Emitted by Ownable when ownership is transferred.
    /// @param previousOwner The previous owner of the contract.
    /// @param newOwner The new owner of the contract.
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /// @dev Transfers ownership of the contract to a new address.
    /// @param newOwner The address that will become the owner.
    function transferOwnership(address newOwner) external;

    /// @dev The owner of this contract.
    /// @return ownerAddress The owner address.
    function owner() external view returns (address ownerAddress);
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;


library LibAuthorizableRichErrorsV06 {

    // bytes4(keccak256("AuthorizedAddressMismatchError(address,address)"))
    bytes4 internal constant AUTHORIZED_ADDRESS_MISMATCH_ERROR_SELECTOR =
        0x140a84db;

    // bytes4(keccak256("IndexOutOfBoundsError(uint256,uint256)"))
    bytes4 internal constant INDEX_OUT_OF_BOUNDS_ERROR_SELECTOR =
        0xe9f83771;

    // bytes4(keccak256("SenderNotAuthorizedError(address)"))
    bytes4 internal constant SENDER_NOT_AUTHORIZED_ERROR_SELECTOR =
        0xb65a25b9;

    // bytes4(keccak256("TargetAlreadyAuthorizedError(address)"))
    bytes4 internal constant TARGET_ALREADY_AUTHORIZED_ERROR_SELECTOR =
        0xde16f1a0;

    // bytes4(keccak256("TargetNotAuthorizedError(address)"))
    bytes4 internal constant TARGET_NOT_AUTHORIZED_ERROR_SELECTOR =
        0xeb5108a2;

    // bytes4(keccak256("ZeroCantBeAuthorizedError()"))
    bytes internal constant ZERO_CANT_BE_AUTHORIZED_ERROR_BYTES =
        hex"57654fe4";

    // solhint-disable func-name-mixedcase
    function AuthorizedAddressMismatchError(
        address authorized,
        address target
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            AUTHORIZED_ADDRESS_MISMATCH_ERROR_SELECTOR,
            authorized,
            target
        );
    }

    function IndexOutOfBoundsError(
        uint256 index,
        uint256 length
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            INDEX_OUT_OF_BOUNDS_ERROR_SELECTOR,
            index,
            length
        );
    }

    function SenderNotAuthorizedError(address sender)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            SENDER_NOT_AUTHORIZED_ERROR_SELECTOR,
            sender
        );
    }

    function TargetAlreadyAuthorizedError(address target)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            TARGET_ALREADY_AUTHORIZED_ERROR_SELECTOR,
            target
        );
    }

    function TargetNotAuthorizedError(address target)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            TARGET_NOT_AUTHORIZED_ERROR_SELECTOR,
            target
        );
    }

    function ZeroCantBeAuthorizedError()
        internal
        pure
        returns (bytes memory)
    {
        return ZERO_CANT_BE_AUTHORIZED_ERROR_BYTES;
    }
}

/*

  Copyright 2019 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;

import "./interfaces/IOwnableV06.sol";
import "./errors/LibRichErrorsV06.sol";
import "./errors/LibOwnableRichErrorsV06.sol";


contract OwnableV06 is
    IOwnableV06
{
    /// @dev The owner of this contract.
    /// @return 0 The owner address.
    address public override owner;

    constructor() public {
        owner = msg.sender;
    }

    modifier onlyOwner() {
        _assertSenderIsOwner();
        _;
    }

    /// @dev Change the owner of this contract.
    /// @param newOwner New owner address.
    function transferOwnership(address newOwner)
        public
        override
        onlyOwner
    {
        if (newOwner == address(0)) {
            LibRichErrorsV06.rrevert(LibOwnableRichErrorsV06.TransferOwnerToZeroError());
        } else {
            owner = newOwner;
            emit OwnershipTransferred(msg.sender, newOwner);
        }
    }

    function _assertSenderIsOwner()
        internal
        view
    {
        if (msg.sender != owner) {
            LibRichErrorsV06.rrevert(LibOwnableRichErrorsV06.OnlyOwnerError(
                msg.sender,
                owner
            ));
        }
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/
pragma solidity ^0.6.5;


library LibOwnableRichErrorsV06 {

    // bytes4(keccak256("OnlyOwnerError(address,address)"))
    bytes4 internal constant ONLY_OWNER_ERROR_SELECTOR =
        0x1de45ad1;

    // bytes4(keccak256("TransferOwnerToZeroError()"))
    bytes internal constant TRANSFER_OWNER_TO_ZERO_ERROR_BYTES =
        hex"e69edc3e";

    // solhint-disable func-name-mixedcase
    function OnlyOwnerError(
        address sender,
        address owner
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            ONLY_OWNER_ERROR_SELECTOR,
            sender,
            owner
        );
    }

    function TransferOwnerToZeroError()
        internal
        pure
        returns (bytes memory)
    {
        return TRANSFER_OWNER_TO_ZERO_ERROR_BYTES;
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-utils/contracts/src/v06/interfaces/IAuthorizableV06.sol";


/// @dev The allowance target for the TokenSpender feature.
interface IAllowanceTarget is
    IAuthorizableV06
{
    /// @dev Execute an arbitrary call. Only an authority can call this.
    /// @param target The call target.
    /// @param callData The call data.
    /// @return resultData The data returned by the call.
    function executeCall(
        address payable target,
        bytes calldata callData
    )
        external
        returns (bytes memory resultData);
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-utils/contracts/src/v06/errors/LibOwnableRichErrorsV06.sol";
import "../errors/LibWalletRichErrors.sol";
import "./IFlashWallet.sol";


/// @dev A contract that can execute arbitrary calls from its owner.
contract FlashWallet is
    IFlashWallet
{
    // solhint-disable no-unused-vars,indent,no-empty-blocks
    using LibRichErrorsV06 for bytes;

    // solhint-disable
    /// @dev Store the owner/deployer as an immutable to make this contract stateless.
    address public override immutable owner;
    // solhint-enable

    constructor() public {
        // The deployer is the owner.
        owner = msg.sender;
    }

    /// @dev Allows only the (immutable) owner to call a function.
    modifier onlyOwner() virtual {
        if (msg.sender != owner) {
            LibOwnableRichErrorsV06.OnlyOwnerError(
                msg.sender,
                owner
            ).rrevert();
        }
        _;
    }

    /// @dev Execute an arbitrary call. Only an authority can call this.
    /// @param target The call target.
    /// @param callData The call data.
    /// @param value Ether to attach to the call.
    /// @return resultData The data returned by the call.
    function executeCall(
        address payable target,
        bytes calldata callData,
        uint256 value
    )
        external
        payable
        override
        onlyOwner
        returns (bytes memory resultData)
    {
        bool success;
        (success, resultData) = target.call{value: value}(callData);
        if (!success) {
            LibWalletRichErrors
                .WalletExecuteCallFailedError(
                    address(this),
                    target,
                    callData,
                    value,
                    resultData
                )
                .rrevert();
        }
    }

    /// @dev Execute an arbitrary delegatecall, in the context of this puppet.
    ///      Only an authority can call this.
    /// @param target The call target.
    /// @param callData The call data.
    /// @return resultData The data returned by the call.
    function executeDelegateCall(
        address payable target,
        bytes calldata callData
    )
        external
        payable
        override
        onlyOwner
        returns (bytes memory resultData)
    {
        bool success;
        (success, resultData) = target.delegatecall(callData);
        if (!success) {
            LibWalletRichErrors
                .WalletExecuteDelegateCallFailedError(
                    address(this),
                    target,
                    callData,
                    resultData
                )
                .rrevert();
        }
    }

    // solhint-disable
    /// @dev Allows this contract to receive ether.
    receive() external override payable {}
    // solhint-enable

    /// @dev Signal support for receiving ERC1155 tokens.
    /// @param interfaceID The interface ID, as per ERC-165 rules.
    /// @return hasSupport `true` if this contract supports an ERC-165 interface.
    function supportsInterface(bytes4 interfaceID)
        external
        pure
        returns (bool hasSupport)
    {
        return  interfaceID == this.supportsInterface.selector ||
                interfaceID == this.onERC1155Received.selector ^ this.onERC1155BatchReceived.selector ||
                interfaceID == this.tokenFallback.selector;
    }

    ///  @dev Allow this contract to receive ERC1155 tokens.
    ///  @return success  `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
    function onERC1155Received(
        address, // operator,
        address, // from,
        uint256, // id,
        uint256, // value,
        bytes calldata //data
    )
        external
        pure
        returns (bytes4 success)
    {
        return this.onERC1155Received.selector;
    }

    ///  @dev Allow this contract to receive ERC1155 tokens.
    ///  @return success  `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
    function onERC1155BatchReceived(
        address, // operator,
        address, // from,
        uint256[] calldata, // ids,
        uint256[] calldata, // values,
        bytes calldata // data
    )
        external
        pure
        returns (bytes4 success)
    {
        return this.onERC1155BatchReceived.selector;
    }

    /// @dev Allows this contract to receive ERC223 tokens.
    function tokenFallback(
        address, // from,
        uint256, // value,
        bytes calldata // value
    )
        external
        pure
    {}
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-utils/contracts/src/v06/interfaces/IOwnableV06.sol";


/// @dev A contract that can execute arbitrary calls from its owner.
interface IFlashWallet {

    /// @dev Execute an arbitrary call. Only an authority can call this.
    /// @param target The call target.
    /// @param callData The call data.
    /// @param value Ether to attach to the call.
    /// @return resultData The data returned by the call.
    function executeCall(
        address payable target,
        bytes calldata callData,
        uint256 value
    )
        external
        payable
        returns (bytes memory resultData);

    /// @dev Execute an arbitrary delegatecall, in the context of this puppet.
    ///      Only an authority can call this.
    /// @param target The call target.
    /// @param callData The call data.
    /// @return resultData The data returned by the call.
    function executeDelegateCall(
        address payable target,
        bytes calldata callData
    )
        external
        payable
        returns (bytes memory resultData);

    /// @dev Allows the puppet to receive ETH.
    receive() external payable;

    /// @dev Fetch the immutable owner/deployer of this contract.
    /// @return owner_ The immutable owner/deployer/
    function owner() external view returns (address owner_);
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-utils/contracts/src/v06/AuthorizableV06.sol";


/// @dev A contract with a `die()` function.
interface IKillable {
    function die() external;
}

/// @dev Deployer contract for ERC20 transformers.
///      Only authorities may call `deploy()` and `kill()`.
contract TransformerDeployer is
    AuthorizableV06
{
    /// @dev Emitted when a contract is deployed via `deploy()`.
    /// @param deployedAddress The address of the deployed contract.
    /// @param nonce The deployment nonce.
    /// @param sender The caller of `deploy()`.
    event Deployed(address deployedAddress, uint256 nonce, address sender);
    /// @dev Emitted when a contract is killed via `kill()`.
    /// @param target The address of the contract being killed..
    /// @param sender The caller of `kill()`.
    event Killed(address target, address sender);

    // @dev The current nonce of this contract.
    uint256 public nonce = 1;
    // @dev Mapping of deployed contract address to deployment nonce.
    mapping (address => uint256) public toDeploymentNonce;

    /// @dev Create this contract and register authorities.
    constructor(address[] memory authorities) public {
        for (uint256 i = 0; i < authorities.length; ++i) {
            _addAuthorizedAddress(authorities[i]);
        }
    }

    /// @dev Deploy a new contract. Only callable by an authority.
    ///      Any attached ETH will also be forwarded.
    function deploy(bytes memory bytecode)
        public
        payable
        onlyAuthorized
        returns (address deployedAddress)
    {
        uint256 deploymentNonce = nonce;
        nonce += 1;
        assembly {
            deployedAddress := create(callvalue(), add(bytecode, 32), mload(bytecode))
        }
        toDeploymentNonce[deployedAddress] = deploymentNonce;
        emit Deployed(deployedAddress, deploymentNonce, msg.sender);
    }

    /// @dev Call `die()` on a contract. Only callable by an authority.
    function kill(IKillable target)
        public
        onlyAuthorized
    {
        target.die();
        emit Killed(address(target), msg.sender);
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;


/// @dev Basic interface for a feature contract.
interface IFeature {

    // solhint-disable func-name-mixedcase

    /// @dev The name of this feature set.
    function FEATURE_NAME() external view returns (string memory name);

    /// @dev The version of this feature set.
    function FEATURE_VERSION() external view returns (uint256 version);
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-utils/contracts/src/v06/interfaces/IOwnableV06.sol";


// solhint-disable no-empty-blocks
/// @dev Owner management and migration features.
interface IOwnable is
    IOwnableV06
{
    /// @dev Emitted when `migrate()` is called.
    /// @param caller The caller of `migrate()`.
    /// @param migrator The migration contract.
    /// @param newOwner The address of the new owner.
    event Migrated(address caller, address migrator, address newOwner);

    /// @dev Execute a migration function in the context of the ZeroEx contract.
    ///      The result of the function being called should be the magic bytes
    ///      0x2c64c5ef (`keccack('MIGRATE_SUCCESS')`). Only callable by the owner.
    ///      The owner will be temporarily set to `address(this)` inside the call.
    ///      Before returning, the owner will be set to `newOwner`.
    /// @param target The migrator contract address.
    /// @param newOwner The address of the new owner.
    /// @param data The call data.
    function migrate(address target, bytes calldata data, address newOwner) external;
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;


/// @dev Basic registry management features.
interface ISimpleFunctionRegistry {

    /// @dev A function implementation was updated via `extend()` or `rollback()`.
    /// @param selector The function selector.
    /// @param oldImpl The implementation contract address being replaced.
    /// @param newImpl The replacement implementation contract address.
    event ProxyFunctionUpdated(bytes4 indexed selector, address oldImpl, address newImpl);

    /// @dev Roll back to a prior implementation of a function.
    /// @param selector The function selector.
    /// @param targetImpl The address of an older implementation of the function.
    function rollback(bytes4 selector, address targetImpl) external;

    /// @dev Register or replace a function.
    /// @param selector The function selector.
    /// @param impl The implementation contract for the function.
    function extend(bytes4 selector, address impl) external;

    /// @dev Retrieve the length of the rollback history for a function.
    /// @param selector The function selector.
    /// @return rollbackLength The number of items in the rollback history for
    ///         the function.
    function getRollbackLength(bytes4 selector)
        external
        view
        returns (uint256 rollbackLength);

    /// @dev Retrieve an entry in the rollback history for a function.
    /// @param selector The function selector.
    /// @param idx The index in the rollback history.
    /// @return impl An implementation address for the function at
    ///         index `idx`.
    function getRollbackEntryAtIndex(bytes4 selector, uint256 idx)
        external
        view
        returns (address impl);
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";


/// @dev Feature that allows spending token allowances.
interface ITokenSpender {

    /// @dev Transfers ERC20 tokens from `owner` to `to`.
    ///      Only callable from within.
    /// @param token The token to spend.
    /// @param owner The owner of the tokens.
    /// @param to The recipient of the tokens.
    /// @param amount The amount of `token` to transfer.
    function _spendERC20Tokens(
        IERC20TokenV06 token,
        address owner,
        address to,
        uint256 amount
    )
        external;

    /// @dev Gets the maximum amount of an ERC20 token `token` that can be
    ///      pulled from `owner`.
    /// @param token The token to spend.
    /// @param owner The owner of the tokens.
    /// @return amount The amount of tokens that can be pulled.
    function getSpendableERC20BalanceOf(IERC20TokenV06 token, address owner)
        external
        view
        returns (uint256 amount);

    /// @dev Get the address of the allowance target.
    /// @return target The target of token allowances.
    function getAllowanceTarget() external view returns (address target);
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;


interface IERC20TokenV06 {

    // solhint-disable no-simple-event-func-name
    event Transfer(
        address indexed from,
        address indexed to,
        uint256 value
    );

    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );

    /// @dev send `value` token to `to` from `msg.sender`
    /// @param to The address of the recipient
    /// @param value The amount of token to be transferred
    /// @return True if transfer was successful
    function transfer(address to, uint256 value)
        external
        returns (bool);

    /// @dev send `value` token to `to` from `from` on the condition it is approved by `from`
    /// @param from The address of the sender
    /// @param to The address of the recipient
    /// @param value The amount of token to be transferred
    /// @return True if transfer was successful
    function transferFrom(
        address from,
        address to,
        uint256 value
    )
        external
        returns (bool);

    /// @dev `msg.sender` approves `spender` to spend `value` tokens
    /// @param spender The address of the account able to transfer the tokens
    /// @param value The amount of wei to be approved for transfer
    /// @return Always true if the call has enough gas to complete execution
    function approve(address spender, uint256 value)
        external
        returns (bool);

    /// @dev Query total supply of token
    /// @return Total supply of token
    function totalSupply()
        external
        view
        returns (uint256);

    /// @dev Get the balance of `owner`.
    /// @param owner The address from which the balance will be retrieved
    /// @return Balance of owner
    function balanceOf(address owner)
        external
        view
        returns (uint256);

    /// @dev Get the allowance for `spender` to spend from `owner`.
    /// @param owner The address of the account owning tokens
    /// @param spender The address of the account able to transfer the tokens
    /// @return Amount of remaining tokens allowed to spent
    function allowance(address owner, address spender)
        external
        view
        returns (uint256);

    /// @dev Get the number of decimals this token has.
    function decimals()
        external
        view
        returns (uint8);
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "../transformers/IERC20Transformer.sol";
import "../external/IFlashWallet.sol";


/// @dev Feature to composably transform between ERC20 tokens.
interface ITransformERC20 {

    /// @dev Defines a transformation to run in `transformERC20()`.
    struct Transformation {
        // The deployment nonce for the transformer.
        // The address of the transformer contract will be derived from this
        // value.
        uint32 deploymentNonce;
        // Arbitrary data to pass to the transformer.
        bytes data;
    }

    /// @dev Raised upon a successful `transformERC20`.
    /// @param taker The taker (caller) address.
    /// @param inputToken The token being provided by the taker.
    ///        If `0xeee...`, ETH is implied and should be provided with the call.`
    /// @param outputToken The token to be acquired by the taker.
    ///        `0xeee...` implies ETH.
    /// @param inputTokenAmount The amount of `inputToken` to take from the taker.
    /// @param outputTokenAmount The amount of `outputToken` received by the taker.
    event TransformedERC20(
        address indexed taker,
        address inputToken,
        address outputToken,
        uint256 inputTokenAmount,
        uint256 outputTokenAmount
    );

    /// @dev Raised when `setTransformerDeployer()` is called.
    /// @param transformerDeployer The new deployer address.
    event TransformerDeployerUpdated(address transformerDeployer);

    /// @dev Replace the allowed deployer for transformers.
    ///      Only callable by the owner.
    /// @param transformerDeployer The address of the trusted deployer for transformers.
    function setTransformerDeployer(address transformerDeployer)
        external;

    /// @dev Deploy a new flash wallet instance and replace the current one with it.
    ///      Useful if we somehow break the current wallet instance.
    ///      Anyone can call this.
    /// @return wallet The new wallet instance.
    function createTransformWallet()
        external
        returns (IFlashWallet wallet);

    /// @dev Executes a series of transformations to convert an ERC20 `inputToken`
    ///      to an ERC20 `outputToken`.
    /// @param inputToken The token being provided by the sender.
    ///        If `0xeee...`, ETH is implied and should be provided with the call.`
    /// @param outputToken The token to be acquired by the sender.
    ///        `0xeee...` implies ETH.
    /// @param inputTokenAmount The amount of `inputToken` to take from the sender.
    /// @param minOutputTokenAmount The minimum amount of `outputToken` the sender
    ///        must receive for the entire transformation to succeed.
    /// @param transformations The transformations to execute on the token balance(s)
    ///        in sequence.
    /// @return outputTokenAmount The amount of `outputToken` received by the sender.
    function transformERC20(
        IERC20TokenV06 inputToken,
        IERC20TokenV06 outputToken,
        uint256 inputTokenAmount,
        uint256 minOutputTokenAmount,
        Transformation[] calldata transformations
    )
        external
        payable
        returns (uint256 outputTokenAmount);

    /// @dev Internal version of `transformERC20()`. Only callable from within.
    /// @param callDataHash Hash of the ingress calldata.
    /// @param taker The taker address.
    /// @param inputToken The token being provided by the taker.
    ///        If `0xeee...`, ETH is implied and should be provided with the call.`
    /// @param outputToken The token to be acquired by the taker.
    ///        `0xeee...` implies ETH.
    /// @param inputTokenAmount The amount of `inputToken` to take from the taker.
    /// @param minOutputTokenAmount The minimum amount of `outputToken` the taker
    ///        must receive for the entire transformation to succeed.
    /// @param transformations The transformations to execute on the token balance(s)
    ///        in sequence.
    /// @return outputTokenAmount The amount of `outputToken` received by the taker.
    function _transformERC20(
        bytes32 callDataHash,
        address payable taker,
        IERC20TokenV06 inputToken,
        IERC20TokenV06 outputToken,
        uint256 inputTokenAmount,
        uint256 minOutputTokenAmount,
        Transformation[] calldata transformations
    )
        external
        payable
        returns (uint256 outputTokenAmount);

    /// @dev Return the current wallet instance that will serve as the execution
    ///      context for transformations.
    /// @return wallet The wallet instance.
    function getTransformWallet()
        external
        view
        returns (IFlashWallet wallet);

    /// @dev Return the allowed deployer for transformers.
    /// @return deployer The transform deployer address.
    function getTransformerDeployer()
        external
        view
        returns (address deployer);
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";


/// @dev A transformation callback used in `TransformERC20.transformERC20()`.
interface IERC20Transformer {

    /// @dev Called from `TransformERC20.transformERC20()`. This will be
    ///      delegatecalled in the context of the FlashWallet instance being used.
    /// @param callDataHash The hash of the `TransformERC20.transformERC20()` calldata.
    /// @param taker The taker address (caller of `TransformERC20.transformERC20()`).
    /// @param data Arbitrary data to pass to the transformer.
    /// @return success The success bytes (`LibERC20Transformer.TRANSFORMER_SUCCESS`).
    function transform(
        bytes32 callDataHash,
        address payable taker,
        bytes calldata data
    )
        external
        returns (bytes4 success);
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../fixins/FixinCommon.sol";
import "../errors/LibOwnableRichErrors.sol";
import "../storage/LibOwnableStorage.sol";
import "../migrations/LibBootstrap.sol";
import "../migrations/LibMigrate.sol";
import "./IFeature.sol";
import "./IOwnable.sol";
import "./SimpleFunctionRegistry.sol";


/// @dev Owner management features.
contract Ownable is
    IFeature,
    IOwnable,
    FixinCommon
{

    // solhint-disable
    /// @dev Name of this feature.
    string public constant override FEATURE_NAME = "Ownable";
    /// @dev Version of this feature.
    uint256 public immutable override FEATURE_VERSION = _encodeVersion(1, 0, 0);
    /// @dev The deployed address of this contract.
    address immutable private _implementation;
    // solhint-enable

    using LibRichErrorsV06 for bytes;

    constructor() public {
        _implementation = address(this);
    }

    /// @dev Initializes this feature. The intial owner will be set to this (ZeroEx)
    ///      to allow the bootstrappers to call `extend()`. Ownership should be
    ///      transferred to the real owner by the bootstrapper after
    ///      bootstrapping is complete.
    /// @return success Magic bytes if successful.
    function bootstrap() external returns (bytes4 success) {
        // Set the owner to ourselves to allow bootstrappers to call `extend()`.
        LibOwnableStorage.getStorage().owner = address(this);

        // Register feature functions.
        SimpleFunctionRegistry(address(this))._extendSelf(this.transferOwnership.selector, _implementation);
        SimpleFunctionRegistry(address(this))._extendSelf(this.owner.selector, _implementation);
        SimpleFunctionRegistry(address(this))._extendSelf(this.migrate.selector, _implementation);
        return LibBootstrap.BOOTSTRAP_SUCCESS;
    }

    /// @dev Change the owner of this contract.
    ///      Only directly callable by the owner.
    /// @param newOwner New owner address.
    function transferOwnership(address newOwner)
        external
        override
        onlyOwner
    {
        LibOwnableStorage.Storage storage proxyStor = LibOwnableStorage.getStorage();

        if (newOwner == address(0)) {
            LibOwnableRichErrors.TransferOwnerToZeroError().rrevert();
        } else {
            proxyStor.owner = newOwner;
            emit OwnershipTransferred(msg.sender, newOwner);
        }
    }

    /// @dev Execute a migration function in the context of the ZeroEx contract.
    ///      The result of the function being called should be the magic bytes
    ///      0x2c64c5ef (`keccack('MIGRATE_SUCCESS')`). Only callable by the owner.
    ///      Temporarily sets the owner to ourselves so we can perform admin functions.
    ///      Before returning, the owner will be set to `newOwner`.
    /// @param target The migrator contract address.
    /// @param data The call data.
    /// @param newOwner The address of the new owner.
    function migrate(address target, bytes calldata data, address newOwner)
        external
        override
        onlyOwner
    {
        if (newOwner == address(0)) {
            LibOwnableRichErrors.TransferOwnerToZeroError().rrevert();
        }

        LibOwnableStorage.Storage storage stor = LibOwnableStorage.getStorage();
        // The owner will be temporarily set to `address(this)` inside the call.
        stor.owner = address(this);

        // Perform the migration.
        LibMigrate.delegatecallMigrateFunction(target, data);

        // Update the owner.
        stor.owner = newOwner;

        emit Migrated(msg.sender, target, newOwner);
    }

    /// @dev Get the owner of this contract.
    /// @return owner_ The owner of this contract.
    function owner() external override view returns (address owner_) {
        return LibOwnableStorage.getStorage().owner;
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../errors/LibCommonRichErrors.sol";
import "../errors/LibOwnableRichErrors.sol";
import "../features/IOwnable.sol";


/// @dev Common feature utilities.
contract FixinCommon {

    using LibRichErrorsV06 for bytes;

    /// @dev The caller must be this contract.
    modifier onlySelf() virtual {
        if (msg.sender != address(this)) {
            LibCommonRichErrors.OnlyCallableBySelfError(msg.sender).rrevert();
        }
        _;
    }

    /// @dev The caller of this function must be the owner.
    modifier onlyOwner() virtual {
        {
            address owner = IOwnable(address(this)).owner();
            if (msg.sender != owner) {
                LibOwnableRichErrors.OnlyOwnerError(
                    msg.sender,
                    owner
                ).rrevert();
            }
        }
        _;
    }

    /// @dev Encode a feature version as a `uint256`.
    /// @param major The major version number of the feature.
    /// @param minor The minor version number of the feature.
    /// @param revision The revision number of the feature.
    /// @return encodedVersion The encoded version number.
    function _encodeVersion(uint32 major, uint32 minor, uint32 revision)
        internal
        pure
        returns (uint256 encodedVersion)
    {
        return (major << 64) | (minor << 32) | revision;
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "./LibStorage.sol";


/// @dev Storage helpers for the `Ownable` feature.
library LibOwnableStorage {

    /// @dev Storage bucket for this feature.
    struct Storage {
        // The owner of this contract.
        address owner;
    }

    /// @dev Get the storage bucket for this contract.
    function getStorage() internal pure returns (Storage storage stor) {
        uint256 storageSlot = LibStorage.getStorageSlot(
            LibStorage.StorageId.Ownable
        );
        // Dip into assembly to change the slot pointed to by the local
        // variable `stor`.
        // See https://solidity.readthedocs.io/en/v0.6.8/assembly.html?highlight=slot#access-to-external-variables-functions-and-libraries
        assembly { stor_slot := storageSlot }
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../errors/LibOwnableRichErrors.sol";


library LibMigrate {

    /// @dev Magic bytes returned by a migrator to indicate success.
    ///      This is `keccack('MIGRATE_SUCCESS')`.
    bytes4 internal constant MIGRATE_SUCCESS = 0x2c64c5ef;

    using LibRichErrorsV06 for bytes;

    /// @dev Perform a delegatecall and ensure it returns the magic bytes.
    /// @param target The call target.
    /// @param data The call data.
    function delegatecallMigrateFunction(
        address target,
        bytes memory data
    )
        internal
    {
        (bool success, bytes memory resultData) = target.delegatecall(data);
        if (!success ||
            resultData.length != 32 ||
            abi.decode(resultData, (bytes4)) != MIGRATE_SUCCESS)
        {
            LibOwnableRichErrors.MigrateCallFailedError(target, resultData).rrevert();
        }
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../fixins/FixinCommon.sol";
import "../storage/LibProxyStorage.sol";
import "../storage/LibSimpleFunctionRegistryStorage.sol";
import "../errors/LibSimpleFunctionRegistryRichErrors.sol";
import "../migrations/LibBootstrap.sol";
import "./IFeature.sol";
import "./ISimpleFunctionRegistry.sol";


/// @dev Basic registry management features.
contract SimpleFunctionRegistry is
    IFeature,
    ISimpleFunctionRegistry,
    FixinCommon
{
    // solhint-disable
    /// @dev Name of this feature.
    string public constant override FEATURE_NAME = "SimpleFunctionRegistry";
    /// @dev Version of this feature.
    uint256 public immutable override FEATURE_VERSION = _encodeVersion(1, 0, 0);
    /// @dev The deployed address of this contract.
    address private immutable _implementation;
    // solhint-enable

    using LibRichErrorsV06 for bytes;

    constructor() public {
        _implementation = address(this);
    }

    /// @dev Initializes this feature, registering its own functions.
    /// @return success Magic bytes if successful.
    function bootstrap()
        external
        returns (bytes4 success)
    {
        // Register the registration functions (inception vibes).
        _extend(this.extend.selector, _implementation);
        _extend(this._extendSelf.selector, _implementation);
        // Register the rollback function.
        _extend(this.rollback.selector, _implementation);
        // Register getters.
        _extend(this.getRollbackLength.selector, _implementation);
        _extend(this.getRollbackEntryAtIndex.selector, _implementation);
        return LibBootstrap.BOOTSTRAP_SUCCESS;
    }

    /// @dev Roll back to a prior implementation of a function.
    ///      Only directly callable by an authority.
    /// @param selector The function selector.
    /// @param targetImpl The address of an older implementation of the function.
    function rollback(bytes4 selector, address targetImpl)
        external
        override
        onlyOwner
    {
        (
            LibSimpleFunctionRegistryStorage.Storage storage stor,
            LibProxyStorage.Storage storage proxyStor
        ) = _getStorages();

        address currentImpl = proxyStor.impls[selector];
        if (currentImpl == targetImpl) {
            // Do nothing if already at targetImpl.
            return;
        }
        // Walk history backwards until we find the target implementation.
        address[] storage history = stor.implHistory[selector];
        uint256 i = history.length;
        for (; i > 0; --i) {
            address impl = history[i - 1];
            history.pop();
            if (impl == targetImpl) {
                break;
            }
        }
        if (i == 0) {
            LibSimpleFunctionRegistryRichErrors.NotInRollbackHistoryError(
                selector,
                targetImpl
            ).rrevert();
        }
        proxyStor.impls[selector] = targetImpl;
        emit ProxyFunctionUpdated(selector, currentImpl, targetImpl);
    }

    /// @dev Register or replace a function.
    ///      Only directly callable by an authority.
    /// @param selector The function selector.
    /// @param impl The implementation contract for the function.
    function extend(bytes4 selector, address impl)
        external
        override
        onlyOwner
    {
        _extend(selector, impl);
    }

    /// @dev Register or replace a function.
    ///      Only callable from within.
    ///      This function is only used during the bootstrap process and
    ///      should be deregistered by the deployer after bootstrapping is
    ///      complete.
    /// @param selector The function selector.
    /// @param impl The implementation contract for the function.
    function _extendSelf(bytes4 selector, address impl)
        external
        onlySelf
    {
        _extend(selector, impl);
    }

    /// @dev Retrieve the length of the rollback history for a function.
    /// @param selector The function selector.
    /// @return rollbackLength The number of items in the rollback history for
    ///         the function.
    function getRollbackLength(bytes4 selector)
        external
        override
        view
        returns (uint256 rollbackLength)
    {
        return LibSimpleFunctionRegistryStorage.getStorage().implHistory[selector].length;
    }

    /// @dev Retrieve an entry in the rollback history for a function.
    /// @param selector The function selector.
    /// @param idx The index in the rollback history.
    /// @return impl An implementation address for the function at
    ///         index `idx`.
    function getRollbackEntryAtIndex(bytes4 selector, uint256 idx)
        external
        override
        view
        returns (address impl)
    {
        return LibSimpleFunctionRegistryStorage.getStorage().implHistory[selector][idx];
    }

    /// @dev Register or replace a function.
    /// @param selector The function selector.
    /// @param impl The implementation contract for the function.
    function _extend(bytes4 selector, address impl)
        private
    {
        (
            LibSimpleFunctionRegistryStorage.Storage storage stor,
            LibProxyStorage.Storage storage proxyStor
        ) = _getStorages();

        address oldImpl = proxyStor.impls[selector];
        address[] storage history = stor.implHistory[selector];
        history.push(oldImpl);
        proxyStor.impls[selector] = impl;
        emit ProxyFunctionUpdated(selector, oldImpl, impl);
    }

    /// @dev Get the storage buckets for this feature and the proxy.
    /// @return stor Storage bucket for this feature.
    /// @return proxyStor age bucket for the proxy.
    function _getStorages()
        private
        pure
        returns (
            LibSimpleFunctionRegistryStorage.Storage storage stor,
            LibProxyStorage.Storage storage proxyStor
        )
    {
        return (
            LibSimpleFunctionRegistryStorage.getStorage(),
            LibProxyStorage.getStorage()
        );
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "./LibStorage.sol";


/// @dev Storage helpers for the `SimpleFunctionRegistry` feature.
library LibSimpleFunctionRegistryStorage {

    /// @dev Storage bucket for this feature.
    struct Storage {
        // Mapping of function selector -> implementation history.
        mapping(bytes4 => address[]) implHistory;
    }

    /// @dev Get the storage bucket for this contract.
    function getStorage() internal pure returns (Storage storage stor) {
        uint256 storageSlot = LibStorage.getStorageSlot(
            LibStorage.StorageId.SimpleFunctionRegistry
        );
        // Dip into assembly to change the slot pointed to by the local
        // variable `stor`.
        // See https://solidity.readthedocs.io/en/v0.6.8/assembly.html?highlight=slot#access-to-external-variables-functions-and-libraries
        assembly { stor_slot := storageSlot }
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibSafeMathV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/LibERC20TokenV06.sol";
import "../errors/LibSpenderRichErrors.sol";
import "../fixins/FixinCommon.sol";
import "../migrations/LibMigrate.sol";
import "../external/IAllowanceTarget.sol";
import "../storage/LibTokenSpenderStorage.sol";
import "./ITokenSpender.sol";
import "./IFeature.sol";
import "./ISimpleFunctionRegistry.sol";


/// @dev Feature that allows spending token allowances.
contract TokenSpender is
    IFeature,
    ITokenSpender,
    FixinCommon
{
    // solhint-disable
    /// @dev Name of this feature.
    string public constant override FEATURE_NAME = "TokenSpender";
    /// @dev Version of this feature.
    uint256 public immutable override FEATURE_VERSION = _encodeVersion(1, 0, 0);
    /// @dev The implementation address of this feature.
    address private immutable _implementation;
    // solhint-enable

    using LibRichErrorsV06 for bytes;

    constructor() public {
        _implementation = address(this);
    }

    /// @dev Initialize and register this feature. Should be delegatecalled
    ///      into during a `Migrate.migrate()`.
    /// @param allowanceTarget An `allowanceTarget` instance, configured to have
    ///        the ZeroeEx contract as an authority.
    /// @return success `MIGRATE_SUCCESS` on success.
    function migrate(IAllowanceTarget allowanceTarget) external returns (bytes4 success) {
        LibTokenSpenderStorage.getStorage().allowanceTarget = allowanceTarget;
        ISimpleFunctionRegistry(address(this))
            .extend(this.getAllowanceTarget.selector, _implementation);
        ISimpleFunctionRegistry(address(this))
            .extend(this._spendERC20Tokens.selector, _implementation);
        ISimpleFunctionRegistry(address(this))
            .extend(this.getSpendableERC20BalanceOf.selector, _implementation);
        return LibMigrate.MIGRATE_SUCCESS;
    }

    /// @dev Transfers ERC20 tokens from `owner` to `to`. Only callable from within.
    /// @param token The token to spend.
    /// @param owner The owner of the tokens.
    /// @param to The recipient of the tokens.
    /// @param amount The amount of `token` to transfer.
    function _spendERC20Tokens(
        IERC20TokenV06 token,
        address owner,
        address to,
        uint256 amount
    )
        external
        override
        onlySelf
    {
        IAllowanceTarget spender = LibTokenSpenderStorage.getStorage().allowanceTarget;
        // Have the allowance target execute an ERC20 `transferFrom()`.
        (bool didSucceed, bytes memory resultData) = address(spender).call(
            abi.encodeWithSelector(
                IAllowanceTarget.executeCall.selector,
                address(token),
                abi.encodeWithSelector(
                    IERC20TokenV06.transferFrom.selector,
                    owner,
                    to,
                    amount
                )
            )
        );
        if (didSucceed) {
            resultData = abi.decode(resultData, (bytes));
        }
        if (!didSucceed || !LibERC20TokenV06.isSuccessfulResult(resultData)) {
            LibSpenderRichErrors.SpenderERC20TransferFromFailedError(
                address(token),
                owner,
                to,
                amount,
                resultData
            ).rrevert();
        }
    }

    /// @dev Gets the maximum amount of an ERC20 token `token` that can be
    ///      pulled from `owner` by the token spender.
    /// @param token The token to spend.
    /// @param owner The owner of the tokens.
    /// @return amount The amount of tokens that can be pulled.
    function getSpendableERC20BalanceOf(IERC20TokenV06 token, address owner)
        external
        override
        view
        returns (uint256 amount)
    {
        return LibSafeMathV06.min256(
            token.allowance(owner, address(LibTokenSpenderStorage.getStorage().allowanceTarget)),
            token.balanceOf(owner)
        );
    }

    /// @dev Get the address of the allowance target.
    /// @return target The target of token allowances.
    function getAllowanceTarget()
        external
        override
        view
        returns (address target)
    {
        return address(LibTokenSpenderStorage.getStorage().allowanceTarget);
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;

import "./errors/LibRichErrorsV06.sol";
import "./errors/LibSafeMathRichErrorsV06.sol";


library LibSafeMathV06 {

    function safeMul(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        if (a == 0) {
            return 0;
        }
        uint256 c = a * b;
        if (c / a != b) {
            LibRichErrorsV06.rrevert(LibSafeMathRichErrorsV06.Uint256BinOpError(
                LibSafeMathRichErrorsV06.BinOpErrorCodes.MULTIPLICATION_OVERFLOW,
                a,
                b
            ));
        }
        return c;
    }

    function safeDiv(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        if (b == 0) {
            LibRichErrorsV06.rrevert(LibSafeMathRichErrorsV06.Uint256BinOpError(
                LibSafeMathRichErrorsV06.BinOpErrorCodes.DIVISION_BY_ZERO,
                a,
                b
            ));
        }
        uint256 c = a / b;
        return c;
    }

    function safeSub(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        if (b > a) {
            LibRichErrorsV06.rrevert(LibSafeMathRichErrorsV06.Uint256BinOpError(
                LibSafeMathRichErrorsV06.BinOpErrorCodes.SUBTRACTION_UNDERFLOW,
                a,
                b
            ));
        }
        return a - b;
    }

    function safeAdd(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        uint256 c = a + b;
        if (c < a) {
            LibRichErrorsV06.rrevert(LibSafeMathRichErrorsV06.Uint256BinOpError(
                LibSafeMathRichErrorsV06.BinOpErrorCodes.ADDITION_OVERFLOW,
                a,
                b
            ));
        }
        return c;
    }

    function max256(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        return a >= b ? a : b;
    }

    function min256(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        return a < b ? a : b;
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;


library LibSafeMathRichErrorsV06 {

    // bytes4(keccak256("Uint256BinOpError(uint8,uint256,uint256)"))
    bytes4 internal constant UINT256_BINOP_ERROR_SELECTOR =
        0xe946c1bb;

    // bytes4(keccak256("Uint256DowncastError(uint8,uint256)"))
    bytes4 internal constant UINT256_DOWNCAST_ERROR_SELECTOR =
        0xc996af7b;

    enum BinOpErrorCodes {
        ADDITION_OVERFLOW,
        MULTIPLICATION_OVERFLOW,
        SUBTRACTION_UNDERFLOW,
        DIVISION_BY_ZERO
    }

    enum DowncastErrorCodes {
        VALUE_TOO_LARGE_TO_DOWNCAST_TO_UINT32,
        VALUE_TOO_LARGE_TO_DOWNCAST_TO_UINT64,
        VALUE_TOO_LARGE_TO_DOWNCAST_TO_UINT96
    }

    // solhint-disable func-name-mixedcase
    function Uint256BinOpError(
        BinOpErrorCodes errorCode,
        uint256 a,
        uint256 b
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            UINT256_BINOP_ERROR_SELECTOR,
            errorCode,
            a,
            b
        );
    }

    function Uint256DowncastError(
        DowncastErrorCodes errorCode,
        uint256 a
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            UINT256_DOWNCAST_ERROR_SELECTOR,
            errorCode,
            a
        );
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;

import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibBytesV06.sol";
import "./IERC20TokenV06.sol";


library LibERC20TokenV06 {
    bytes constant private DECIMALS_CALL_DATA = hex"313ce567";

    /// @dev Calls `IERC20TokenV06(token).approve()`.
    ///      Reverts if the result fails `isSuccessfulResult()` or the call reverts.
    /// @param token The address of the token contract.
    /// @param spender The address that receives an allowance.
    /// @param allowance The allowance to set.
    function compatApprove(
        IERC20TokenV06 token,
        address spender,
        uint256 allowance
    )
        internal
    {
        bytes memory callData = abi.encodeWithSelector(
            token.approve.selector,
            spender,
            allowance
        );
        _callWithOptionalBooleanResult(address(token), callData);
    }

    /// @dev Calls `IERC20TokenV06(token).approve()` and sets the allowance to the
    ///      maximum if the current approval is not already >= an amount.
    ///      Reverts if the result fails `isSuccessfulResult()` or the call reverts.
    /// @param token The address of the token contract.
    /// @param spender The address that receives an allowance.
    /// @param amount The minimum allowance needed.
    function approveIfBelow(
        IERC20TokenV06 token,
        address spender,
        uint256 amount
    )
        internal
    {
        if (token.allowance(address(this), spender) < amount) {
            compatApprove(token, spender, uint256(-1));
        }
    }

    /// @dev Calls `IERC20TokenV06(token).transfer()`.
    ///      Reverts if the result fails `isSuccessfulResult()` or the call reverts.
    /// @param token The address of the token contract.
    /// @param to The address that receives the tokens
    /// @param amount Number of tokens to transfer.
    function compatTransfer(
        IERC20TokenV06 token,
        address to,
        uint256 amount
    )
        internal
    {
        bytes memory callData = abi.encodeWithSelector(
            token.transfer.selector,
            to,
            amount
        );
        _callWithOptionalBooleanResult(address(token), callData);
    }

    /// @dev Calls `IERC20TokenV06(token).transferFrom()`.
    ///      Reverts if the result fails `isSuccessfulResult()` or the call reverts.
    /// @param token The address of the token contract.
    /// @param from The owner of the tokens.
    /// @param to The address that receives the tokens
    /// @param amount Number of tokens to transfer.
    function compatTransferFrom(
        IERC20TokenV06 token,
        address from,
        address to,
        uint256 amount
    )
        internal
    {
        bytes memory callData = abi.encodeWithSelector(
            token.transferFrom.selector,
            from,
            to,
            amount
        );
        _callWithOptionalBooleanResult(address(token), callData);
    }

    /// @dev Retrieves the number of decimals for a token.
    ///      Returns `18` if the call reverts.
    /// @param token The address of the token contract.
    /// @return tokenDecimals The number of decimals places for the token.
    function compatDecimals(IERC20TokenV06 token)
        internal
        view
        returns (uint8 tokenDecimals)
    {
        tokenDecimals = 18;
        (bool didSucceed, bytes memory resultData) = address(token).staticcall(DECIMALS_CALL_DATA);
        if (didSucceed && resultData.length == 32) {
            tokenDecimals = uint8(LibBytesV06.readUint256(resultData, 0));
        }
    }

    /// @dev Retrieves the allowance for a token, owner, and spender.
    ///      Returns `0` if the call reverts.
    /// @param token The address of the token contract.
    /// @param owner The owner of the tokens.
    /// @param spender The address the spender.
    /// @return allowance_ The allowance for a token, owner, and spender.
    function compatAllowance(IERC20TokenV06 token, address owner, address spender)
        internal
        view
        returns (uint256 allowance_)
    {
        (bool didSucceed, bytes memory resultData) = address(token).staticcall(
            abi.encodeWithSelector(
                token.allowance.selector,
                owner,
                spender
            )
        );
        if (didSucceed && resultData.length == 32) {
            allowance_ = LibBytesV06.readUint256(resultData, 0);
        }
    }

    /// @dev Retrieves the balance for a token owner.
    ///      Returns `0` if the call reverts.
    /// @param token The address of the token contract.
    /// @param owner The owner of the tokens.
    /// @return balance The token balance of an owner.
    function compatBalanceOf(IERC20TokenV06 token, address owner)
        internal
        view
        returns (uint256 balance)
    {
        (bool didSucceed, bytes memory resultData) = address(token).staticcall(
            abi.encodeWithSelector(
                token.balanceOf.selector,
                owner
            )
        );
        if (didSucceed && resultData.length == 32) {
            balance = LibBytesV06.readUint256(resultData, 0);
        }
    }

    /// @dev Check if the data returned by a non-static call to an ERC20 token
    ///      is a successful result. Supported functions are `transfer()`,
    ///      `transferFrom()`, and `approve()`.
    /// @param resultData The raw data returned by a non-static call to the ERC20 token.
    /// @return isSuccessful Whether the result data indicates success.
    function isSuccessfulResult(bytes memory resultData)
        internal
        pure
        returns (bool isSuccessful)
    {
        if (resultData.length == 0) {
            return true;
        }
        if (resultData.length == 32) {
            uint256 result = LibBytesV06.readUint256(resultData, 0);
            if (result == 1) {
                return true;
            }
        }
    }

    /// @dev Executes a call on address `target` with calldata `callData`
    ///      and asserts that either nothing was returned or a single boolean
    ///      was returned equal to `true`.
    /// @param target The call target.
    /// @param callData The abi-encoded call data.
    function _callWithOptionalBooleanResult(
        address target,
        bytes memory callData
    )
        private
    {
        (bool didSucceed, bytes memory resultData) = target.call(callData);
        if (didSucceed && isSuccessfulResult(resultData)) {
            return;
        }
        LibRichErrorsV06.rrevert(resultData);
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "./LibStorage.sol";
import "../external/IAllowanceTarget.sol";


/// @dev Storage helpers for the `TokenSpender` feature.
library LibTokenSpenderStorage {

    /// @dev Storage bucket for this feature.
    struct Storage {
        // Allowance target contract.
        IAllowanceTarget allowanceTarget;
    }

    /// @dev Get the storage bucket for this contract.
    function getStorage() internal pure returns (Storage storage stor) {
        uint256 storageSlot = LibStorage.getStorageSlot(
            LibStorage.StorageId.TokenSpender
        );
        // Dip into assembly to change the slot pointed to by the local
        // variable `stor`.
        // See https://solidity.readthedocs.io/en/v0.6.8/assembly.html?highlight=slot#access-to-external-variables-functions-and-libraries
        assembly { stor_slot := storageSlot }
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/LibERC20TokenV06.sol";
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibSafeMathV06.sol";
import "../errors/LibTransformERC20RichErrors.sol";
import "../fixins/FixinCommon.sol";
import "../migrations/LibMigrate.sol";
import "../external/IFlashWallet.sol";
import "../external/FlashWallet.sol";
import "../storage/LibTransformERC20Storage.sol";
import "../transformers/IERC20Transformer.sol";
import "../transformers/LibERC20Transformer.sol";
import "./ITransformERC20.sol";
import "./ITokenSpender.sol";
import "./IFeature.sol";
import "./ISimpleFunctionRegistry.sol";


/// @dev Feature to composably transform between ERC20 tokens.
contract TransformERC20 is
    IFeature,
    ITransformERC20,
    FixinCommon
{

    /// @dev Stack vars for `_transformERC20Private()`.
    struct TransformERC20PrivateState {
        IFlashWallet wallet;
        address transformerDeployer;
        uint256 takerOutputTokenBalanceBefore;
        uint256 takerOutputTokenBalanceAfter;
    }

    // solhint-disable
    /// @dev Name of this feature.
    string public constant override FEATURE_NAME = "TransformERC20";
    /// @dev Version of this feature.
    uint256 public immutable override FEATURE_VERSION = _encodeVersion(1, 0, 0);
    /// @dev The implementation address of this feature.
    address private immutable _implementation;
    // solhint-enable

    using LibSafeMathV06 for uint256;
    using LibRichErrorsV06 for bytes;

    constructor() public {
        _implementation = address(this);
    }

    /// @dev Initialize and register this feature.
    ///      Should be delegatecalled by `Migrate.migrate()`.
    /// @param transformerDeployer The trusted deployer for transformers.
    /// @return success `LibMigrate.SUCCESS` on success.
    function migrate(address transformerDeployer) external returns (bytes4 success) {
        ISimpleFunctionRegistry(address(this))
            .extend(this.getTransformerDeployer.selector, _implementation);
        ISimpleFunctionRegistry(address(this))
            .extend(this.createTransformWallet.selector, _implementation);
        ISimpleFunctionRegistry(address(this))
            .extend(this.getTransformWallet.selector, _implementation);
        ISimpleFunctionRegistry(address(this))
            .extend(this.setTransformerDeployer.selector, _implementation);
        ISimpleFunctionRegistry(address(this))
            .extend(this.transformERC20.selector, _implementation);
        ISimpleFunctionRegistry(address(this))
            .extend(this._transformERC20.selector, _implementation);
        createTransformWallet();
        LibTransformERC20Storage.getStorage().transformerDeployer = transformerDeployer;
        return LibMigrate.MIGRATE_SUCCESS;
    }

    /// @dev Replace the allowed deployer for transformers.
    ///      Only callable by the owner.
    /// @param transformerDeployer The address of the trusted deployer for transformers.
    function setTransformerDeployer(address transformerDeployer)
        external
        override
        onlyOwner
    {
        LibTransformERC20Storage.getStorage().transformerDeployer = transformerDeployer;
        emit TransformerDeployerUpdated(transformerDeployer);
    }

    /// @dev Return the allowed deployer for transformers.
    /// @return deployer The transform deployer address.
    function getTransformerDeployer()
        public
        override
        view
        returns (address deployer)
    {
        return LibTransformERC20Storage.getStorage().transformerDeployer;
    }

    /// @dev Deploy a new wallet instance and replace the current one with it.
    ///      Useful if we somehow break the current wallet instance.
    ///      Anyone can call this.
    /// @return wallet The new wallet instance.
    function createTransformWallet()
        public
        override
        returns (IFlashWallet wallet)
    {
        wallet = new FlashWallet();
        LibTransformERC20Storage.getStorage().wallet = wallet;
    }

    /// @dev Executes a series of transformations to convert an ERC20 `inputToken`
    ///      to an ERC20 `outputToken`.
    /// @param inputToken The token being provided by the sender.
    ///        If `0xeee...`, ETH is implied and should be provided with the call.`
    /// @param outputToken The token to be acquired by the sender.
    ///        `0xeee...` implies ETH.
    /// @param inputTokenAmount The amount of `inputToken` to take from the sender.
    ///        If set to `uint256(-1)`, the entire spendable balance of the taker
    ///        will be solt.
    /// @param minOutputTokenAmount The minimum amount of `outputToken` the sender
    ///        must receive for the entire transformation to succeed. If set to zero,
    ///        the minimum output token transfer will not be asserted.
    /// @param transformations The transformations to execute on the token balance(s)
    ///        in sequence.
    /// @return outputTokenAmount The amount of `outputToken` received by the sender.
    function transformERC20(
        IERC20TokenV06 inputToken,
        IERC20TokenV06 outputToken,
        uint256 inputTokenAmount,
        uint256 minOutputTokenAmount,
        Transformation[] memory transformations
    )
        public
        override
        payable
        returns (uint256 outputTokenAmount)
    {
        return _transformERC20Private(
            keccak256(msg.data),
            msg.sender,
            inputToken,
            outputToken,
            inputTokenAmount,
            minOutputTokenAmount,
            transformations
        );
    }

    /// @dev Internal version of `transformERC20()`. Only callable from within.
    /// @param callDataHash Hash of the ingress calldata.
    /// @param taker The taker address.
    /// @param inputToken The token being provided by the taker.
    ///        If `0xeee...`, ETH is implied and should be provided with the call.`
    /// @param outputToken The token to be acquired by the taker.
    ///        `0xeee...` implies ETH.
    /// @param inputTokenAmount The amount of `inputToken` to take from the taker.
    ///        If set to `uint256(-1)`, the entire spendable balance of the taker
    ///        will be solt.
    /// @param minOutputTokenAmount The minimum amount of `outputToken` the taker
    ///        must receive for the entire transformation to succeed. If set to zero,
    ///        the minimum output token transfer will not be asserted.
    /// @param transformations The transformations to execute on the token balance(s)
    ///        in sequence.
    /// @return outputTokenAmount The amount of `outputToken` received by the taker.
    function _transformERC20(
        bytes32 callDataHash,
        address payable taker,
        IERC20TokenV06 inputToken,
        IERC20TokenV06 outputToken,
        uint256 inputTokenAmount,
        uint256 minOutputTokenAmount,
        Transformation[] memory transformations
    )
        public
        override
        payable
        onlySelf
        returns (uint256 outputTokenAmount)
    {
        return _transformERC20Private(
            callDataHash,
            taker,
            inputToken,
            outputToken,
            inputTokenAmount,
            minOutputTokenAmount,
            transformations
        );
    }

    /// @dev Private version of `transformERC20()`.
    /// @param callDataHash Hash of the ingress calldata.
    /// @param taker The taker address.
    /// @param inputToken The token being provided by the taker.
    ///        If `0xeee...`, ETH is implied and should be provided with the call.`
    /// @param outputToken The token to be acquired by the taker.
    ///        `0xeee...` implies ETH.
    /// @param inputTokenAmount The amount of `inputToken` to take from the taker.
    ///        If set to `uint256(-1)`, the entire spendable balance of the taker
    ///        will be solt.
    /// @param minOutputTokenAmount The minimum amount of `outputToken` the taker
    ///        must receive for the entire transformation to succeed. If set to zero,
    ///        the minimum output token transfer will not be asserted.
    /// @param transformations The transformations to execute on the token balance(s)
    ///        in sequence.
    /// @return outputTokenAmount The amount of `outputToken` received by the taker.
    function _transformERC20Private(
        bytes32 callDataHash,
        address payable taker,
        IERC20TokenV06 inputToken,
        IERC20TokenV06 outputToken,
        uint256 inputTokenAmount,
        uint256 minOutputTokenAmount,
        Transformation[] memory transformations
    )
        private
        returns (uint256 outputTokenAmount)
    {
        // If the input token amount is -1, transform the taker's entire
        // spendable balance.
        if (inputTokenAmount == uint256(-1)) {
            inputTokenAmount = ITokenSpender(address(this))
                .getSpendableERC20BalanceOf(inputToken, taker);
        }

        TransformERC20PrivateState memory state;
        state.wallet = getTransformWallet();
        state.transformerDeployer = getTransformerDeployer();

        // Remember the initial output token balance of the taker.
        state.takerOutputTokenBalanceBefore =
            LibERC20Transformer.getTokenBalanceOf(outputToken, taker);

        // Pull input tokens from the taker to the wallet and transfer attached ETH.
        _transferInputTokensAndAttachedEth(
            inputToken,
            taker,
            address(state.wallet),
            inputTokenAmount
        );

        // Perform transformations.
        for (uint256 i = 0; i < transformations.length; ++i) {
            _executeTransformation(
                state.wallet,
                transformations[i],
                state.transformerDeployer,
                taker,
                callDataHash
            );
        }

        // Compute how much output token has been transferred to the taker.
        state.takerOutputTokenBalanceAfter =
            LibERC20Transformer.getTokenBalanceOf(outputToken, taker);
        if (state.takerOutputTokenBalanceAfter > state.takerOutputTokenBalanceBefore) {
            outputTokenAmount = state.takerOutputTokenBalanceAfter.safeSub(
                state.takerOutputTokenBalanceBefore
            );
        } else if (state.takerOutputTokenBalanceAfter < state.takerOutputTokenBalanceBefore) {
            LibTransformERC20RichErrors.NegativeTransformERC20OutputError(
                address(outputToken),
                state.takerOutputTokenBalanceBefore - state.takerOutputTokenBalanceAfter
            ).rrevert();
        }
        // Ensure enough output token has been sent to the taker.
        if (outputTokenAmount < minOutputTokenAmount) {
            LibTransformERC20RichErrors.IncompleteTransformERC20Error(
                address(outputToken),
                outputTokenAmount,
                minOutputTokenAmount
            ).rrevert();
        }

        // Emit an event.
        emit TransformedERC20(
            taker,
            address(inputToken),
            address(outputToken),
            inputTokenAmount,
            outputTokenAmount
        );
    }

    /// @dev Return the current wallet instance that will serve as the execution
    ///      context for transformations.
    /// @return wallet The wallet instance.
    function getTransformWallet()
        public
        override
        view
        returns (IFlashWallet wallet)
    {
        return LibTransformERC20Storage.getStorage().wallet;
    }

    /// @dev Transfer input tokens from the taker and any attached ETH to `to`
    /// @param inputToken The token to pull from the taker.
    /// @param from The from (taker) address.
    /// @param to The recipient of tokens and ETH.
    /// @param amount Amount of `inputToken` tokens to transfer.
    function _transferInputTokensAndAttachedEth(
        IERC20TokenV06 inputToken,
        address from,
        address payable to,
        uint256 amount
    )
        private
    {
        // Transfer any attached ETH.
        if (msg.value != 0) {
            to.transfer(msg.value);
        }
        // Transfer input tokens.
        if (!LibERC20Transformer.isTokenETH(inputToken)) {
            // Token is not ETH, so pull ERC20 tokens.
            ITokenSpender(address(this))._spendERC20Tokens(
                inputToken,
                from,
                to,
                amount
            );
        } else if (msg.value < amount) {
             // Token is ETH, so the caller must attach enough ETH to the call.
            LibTransformERC20RichErrors.InsufficientEthAttachedError(
                msg.value,
                amount
            ).rrevert();
        }
    }

    /// @dev Executs a transformer in the context of `wallet`.
    /// @param wallet The wallet instance.
    /// @param transformation The transformation.
    /// @param transformerDeployer The address of the transformer deployer.
    /// @param taker The taker address.
    /// @param callDataHash Hash of the calldata.
    function _executeTransformation(
        IFlashWallet wallet,
        Transformation memory transformation,
        address transformerDeployer,
        address payable taker,
        bytes32 callDataHash
    )
        private
    {
        // Derive the transformer address from the deployment nonce.
        address payable transformer = LibERC20Transformer.getDeployedAddress(
            transformerDeployer,
            transformation.deploymentNonce
        );
        // Call `transformer.transform()` as the wallet.
        bytes memory resultData = wallet.executeDelegateCall(
            // The call target.
            transformer,
            // Call data.
            abi.encodeWithSelector(
                IERC20Transformer.transform.selector,
                callDataHash,
                taker,
                transformation.data
            )
        );
        // Ensure the transformer returned the magic bytes.
        if (resultData.length != 32 ||
            abi.decode(resultData, (bytes4)) != LibERC20Transformer.TRANSFORMER_SUCCESS
        ) {
            LibTransformERC20RichErrors.TransformerFailedError(
                transformer,
                transformation.data,
                resultData
            ).rrevert();
        }
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "./LibStorage.sol";
import "../external/IFlashWallet.sol";


/// @dev Storage helpers for the `TokenSpender` feature.
library LibTransformERC20Storage {

    /// @dev Storage bucket for this feature.
    struct Storage {
        // The current wallet instance.
        IFlashWallet wallet;
        // The transformer deployer address.
        address transformerDeployer;
    }

    /// @dev Get the storage bucket for this contract.
    function getStorage() internal pure returns (Storage storage stor) {
        uint256 storageSlot = LibStorage.getStorageSlot(
            LibStorage.StorageId.TransformERC20
        );
        // Dip into assembly to change the slot pointed to by the local
        // variable `stor`.
        // See https://solidity.readthedocs.io/en/v0.6.8/assembly.html?highlight=slot#access-to-external-variables-functions-and-libraries
        assembly { stor_slot := storageSlot }
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/LibERC20TokenV06.sol";


library LibERC20Transformer {

    using LibERC20TokenV06 for IERC20TokenV06;

    /// @dev ETH pseudo-token address.
    address constant internal ETH_TOKEN_ADDRESS = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
    /// @dev Return value indicating success in `IERC20Transformer.transform()`.
    ///      This is just `keccak256('TRANSFORMER_SUCCESS')`.
    bytes4 constant internal TRANSFORMER_SUCCESS = 0x13c9929e;

    /// @dev Transfer ERC20 tokens and ETH.
    /// @param token An ERC20 or the ETH pseudo-token address (`ETH_TOKEN_ADDRESS`).
    /// @param to The recipient.
    /// @param amount The transfer amount.
    function transformerTransfer(
        IERC20TokenV06 token,
        address payable to,
        uint256 amount
    )
        internal
    {
        if (isTokenETH(token)) {
            to.transfer(amount);
        } else {
            token.compatTransfer(to, amount);
        }
    }

    /// @dev Check if a token is the ETH pseudo-token.
    /// @param token The token to check.
    /// @return isETH `true` if the token is the ETH pseudo-token.
    function isTokenETH(IERC20TokenV06 token)
        internal
        pure
        returns (bool isETH)
    {
        return address(token) == ETH_TOKEN_ADDRESS;
    }

    /// @dev Check the balance of an ERC20 token or ETH.
    /// @param token An ERC20 or the ETH pseudo-token address (`ETH_TOKEN_ADDRESS`).
    /// @param owner Holder of the tokens.
    /// @return tokenBalance The balance of `owner`.
    function getTokenBalanceOf(IERC20TokenV06 token, address owner)
        internal
        view
        returns (uint256 tokenBalance)
    {
        if (isTokenETH(token)) {
            return owner.balance;
        }
        return token.balanceOf(owner);
    }

    /// @dev RLP-encode a 32-bit or less account nonce.
    /// @param nonce A positive integer in the range 0 <= nonce < 2^32.
    /// @return rlpNonce The RLP encoding.
    function rlpEncodeNonce(uint32 nonce)
        internal
        pure
        returns (bytes memory rlpNonce)
    {
        // See https://github.com/ethereum/wiki/wiki/RLP for RLP encoding rules.
        if (nonce == 0) {
            rlpNonce = new bytes(1);
            rlpNonce[0] = 0x80;
        } else if (nonce < 0x80) {
            rlpNonce = new bytes(1);
            rlpNonce[0] = byte(uint8(nonce));
        } else if (nonce <= 0xFF) {
            rlpNonce = new bytes(2);
            rlpNonce[0] = 0x81;
            rlpNonce[1] = byte(uint8(nonce));
        } else if (nonce <= 0xFFFF) {
            rlpNonce = new bytes(3);
            rlpNonce[0] = 0x82;
            rlpNonce[1] = byte(uint8((nonce & 0xFF00) >> 8));
            rlpNonce[2] = byte(uint8(nonce));
        } else if (nonce <= 0xFFFFFF) {
            rlpNonce = new bytes(4);
            rlpNonce[0] = 0x83;
            rlpNonce[1] = byte(uint8((nonce & 0xFF0000) >> 16));
            rlpNonce[2] = byte(uint8((nonce & 0xFF00) >> 8));
            rlpNonce[3] = byte(uint8(nonce));
        } else {
            rlpNonce = new bytes(5);
            rlpNonce[0] = 0x84;
            rlpNonce[1] = byte(uint8((nonce & 0xFF000000) >> 24));
            rlpNonce[2] = byte(uint8((nonce & 0xFF0000) >> 16));
            rlpNonce[3] = byte(uint8((nonce & 0xFF00) >> 8));
            rlpNonce[4] = byte(uint8(nonce));
        }
    }

    /// @dev Compute the expected deployment address by `deployer` at
    ///      the nonce given by `deploymentNonce`.
    /// @param deployer The address of the deployer.
    /// @param deploymentNonce The nonce that the deployer had when deploying
    ///        a contract.
    /// @return deploymentAddress The deployment address.
    function getDeployedAddress(address deployer, uint32 deploymentNonce)
        internal
        pure
        returns (address payable deploymentAddress)
    {
        // The address of if a deployed contract is the lower 20 bytes of the
        // hash of the RLP-encoded deployer's account address + account nonce.
        // See: https://ethereum.stackexchange.com/questions/760/how-is-the-address-of-an-ethereum-contract-computed
        bytes memory rlpNonce = rlpEncodeNonce(deploymentNonce);
        return address(uint160(uint256(keccak256(abi.encodePacked(
            byte(uint8(0xC0 + 21 + rlpNonce.length)),
            byte(uint8(0x80 + 20)),
            deployer,
            rlpNonce
        )))));
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "../ZeroEx.sol";
import "../features/IOwnable.sol";
import "../features/TokenSpender.sol";
import "../features/TransformERC20.sol";
import "../external/AllowanceTarget.sol";
import "./InitialMigration.sol";


/// @dev A contract for deploying and configuring the full ZeroEx contract.
contract FullMigration {

    // solhint-disable no-empty-blocks,indent

    /// @dev Features to add the the proxy contract.
    struct Features {
        SimpleFunctionRegistry registry;
        Ownable ownable;
        TokenSpender tokenSpender;
        TransformERC20 transformERC20;
    }

    /// @dev Parameters needed to initialize features.
    struct MigrateOpts {
        address transformerDeployer;
    }

    /// @dev The allowed caller of `deploy()`.
    address public immutable deployer;
    /// @dev The initial migration contract.
    InitialMigration private _initialMigration;

    /// @dev Instantiate this contract and set the allowed caller of `deploy()`
    ///      to `deployer`.
    /// @param deployer_ The allowed caller of `deploy()`.
    constructor(address payable deployer_)
        public
    {
        deployer = deployer_;
        // Create an initial migration contract with this contract set to the
        // allowed deployer.
        _initialMigration = new InitialMigration(address(this));
    }

    /// @dev Deploy the `ZeroEx` contract with the full feature set,
    ///      transfer ownership to `owner`, then self-destruct.
    /// @param owner The owner of the contract.
    /// @param features Features to add to the proxy.
    /// @return zeroEx The deployed and configured `ZeroEx` contract.
    /// @param migrateOpts Parameters needed to initialize features.
    function deploy(
        address payable owner,
        Features memory features,
        MigrateOpts memory migrateOpts
    )
        public
        returns (ZeroEx zeroEx)
    {
        require(msg.sender == deployer, "FullMigration/INVALID_SENDER");

        // Perform the initial migration with the owner set to this contract.
        zeroEx = _initialMigration.deploy(
            address(uint160(address(this))),
            InitialMigration.BootstrapFeatures({
                registry: features.registry,
                ownable: features.ownable
            })
        );

        // Add features.
        _addFeatures(zeroEx, owner, features, migrateOpts);

        // Transfer ownership to the real owner.
        IOwnable(address(zeroEx)).transferOwnership(owner);

        // Self-destruct.
        this.die(owner);
    }

    /// @dev Destroy this contract. Only callable from ourselves (from `deploy()`).
    /// @param ethRecipient Receiver of any ETH in this contract.
    function die(address payable ethRecipient)
        external
        virtual
    {
        require(msg.sender == address(this), "FullMigration/INVALID_SENDER");
        // This contract should not hold any funds but we send
        // them to the ethRecipient just in case.
        selfdestruct(ethRecipient);
    }

    /// @dev Deploy and register features to the ZeroEx contract.
    /// @param zeroEx The bootstrapped ZeroEx contract.
    /// @param owner The ultimate owner of the ZeroEx contract.
    /// @param features Features to add to the proxy.
    /// @param migrateOpts Parameters needed to initialize features.
    function _addFeatures(
        ZeroEx zeroEx,
        address owner,
        Features memory features,
        MigrateOpts memory migrateOpts
    )
        private
    {
        IOwnable ownable = IOwnable(address(zeroEx));
        // TokenSpender
        {
            // Create the allowance target.
            AllowanceTarget allowanceTarget = new AllowanceTarget();
            // Let the ZeroEx contract use the allowance target.
            allowanceTarget.addAuthorizedAddress(address(zeroEx));
            // Transfer ownership of the allowance target to the (real) owner.
            allowanceTarget.transferOwnership(owner);
            // Register the feature.
            ownable.migrate(
                address(features.tokenSpender),
                abi.encodeWithSelector(
                    TokenSpender.migrate.selector,
                    allowanceTarget
                ),
                address(this)
            );
        }
        // TransformERC20
        {
            // Register the feature.
            ownable.migrate(
                address(features.transformERC20),
                abi.encodeWithSelector(
                    TransformERC20.migrate.selector,
                    migrateOpts.transformerDeployer
                ),
                address(this)
            );
        }
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "../ZeroEx.sol";
import "../features/IBootstrap.sol";
import "../features/SimpleFunctionRegistry.sol";
import "../features/Ownable.sol";
import "./LibBootstrap.sol";


/// @dev A contract for deploying and configuring a minimal ZeroEx contract.
contract InitialMigration {

    /// @dev Features to bootstrap into the the proxy contract.
    struct BootstrapFeatures {
        SimpleFunctionRegistry registry;
        Ownable ownable;
    }

    /// @dev The allowed caller of `deploy()`. In production, this would be
    ///      the governor.
    address public immutable deployer;
    /// @dev The real address of this contract.
    address private immutable _implementation;

    /// @dev Instantiate this contract and set the allowed caller of `deploy()`
    ///      to `deployer_`.
    /// @param deployer_ The allowed caller of `deploy()`.
    constructor(address deployer_) public {
        deployer = deployer_;
        _implementation = address(this);
    }

    /// @dev Deploy the `ZeroEx` contract with the minimum feature set,
    ///      transfers ownership to `owner`, then self-destructs.
    ///      Only callable by `deployer` set in the contstructor.
    /// @param owner The owner of the contract.
    /// @param features Features to bootstrap into the proxy.
    /// @return zeroEx The deployed and configured `ZeroEx` contract.
    function deploy(address payable owner, BootstrapFeatures memory features)
        public
        virtual
        returns (ZeroEx zeroEx)
    {
        // Must be called by the allowed deployer.
        require(msg.sender == deployer, "InitialMigration/INVALID_SENDER");

        // Deploy the ZeroEx contract, setting ourselves as the bootstrapper.
        zeroEx = new ZeroEx();

        // Bootstrap the initial feature set.
        IBootstrap(address(zeroEx)).bootstrap(
            address(this),
            abi.encodeWithSelector(this.bootstrap.selector, owner, features)
        );

        // Self-destruct. This contract should not hold any funds but we send
        // them to the owner just in case.
        this.die(owner);
    }

    /// @dev Sets up the initial state of the `ZeroEx` contract.
    ///      The `ZeroEx` contract will delegatecall into this function.
    /// @param owner The new owner of the ZeroEx contract.
    /// @param features Features to bootstrap into the proxy.
    /// @return success Magic bytes if successful.
    function bootstrap(address owner, BootstrapFeatures memory features)
        public
        virtual
        returns (bytes4 success)
    {
        // Deploy and migrate the initial features.
        // Order matters here.

        // Initialize Registry.
        LibBootstrap.delegatecallBootstrapFunction(
            address(features.registry),
            abi.encodeWithSelector(
                SimpleFunctionRegistry.bootstrap.selector
            )
        );

        // Initialize Ownable.
        LibBootstrap.delegatecallBootstrapFunction(
            address(features.ownable),
            abi.encodeWithSelector(
                Ownable.bootstrap.selector
            )
        );

        // De-register `SimpleFunctionRegistry._extendSelf`.
        SimpleFunctionRegistry(address(this)).rollback(
            SimpleFunctionRegistry._extendSelf.selector,
            address(0)
        );

        // Transfer ownership to the real owner.
        Ownable(address(this)).transferOwnership(owner);

        success = LibBootstrap.BOOTSTRAP_SUCCESS;
    }

    /// @dev Self-destructs this contract. Only callable by this contract.
    /// @param ethRecipient Who to transfer outstanding ETH to.
    function die(address payable ethRecipient) public virtual {
        require(msg.sender == _implementation, "InitialMigration/INVALID_SENDER");
        selfdestruct(ethRecipient);
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibSafeMathV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/LibERC20TokenV06.sol";
import "../errors/LibTransformERC20RichErrors.sol";
import "./Transformer.sol";
import "./LibERC20Transformer.sol";


/// @dev A transformer that transfers tokens to arbitrary addresses.
contract AffiliateFeeTransformer is
    Transformer
{
    // solhint-disable no-empty-blocks
    using LibRichErrorsV06 for bytes;
    using LibSafeMathV06 for uint256;
    using LibERC20Transformer for IERC20TokenV06;

    /// @dev Information for a single fee.
    struct TokenFee {
        // The token to transfer to `recipient`.
        IERC20TokenV06 token;
        // Amount of each `token` to transfer to `recipient`.
        // If `amount == uint256(-1)`, the entire balance of `token` will be
        // transferred.
        uint256 amount;
        // Recipient of `token`.
        address payable recipient;
    }

    uint256 private constant MAX_UINT256 = uint256(-1);

    /// @dev Create this contract.
    constructor()
        public
        Transformer()
    {}

    /// @dev Transfers tokens to recipients.
    /// @param data ABI-encoded `TokenFee[]`, indicating which tokens to transfer.
    /// @return success The success bytes (`LibERC20Transformer.TRANSFORMER_SUCCESS`).
    function transform(
        bytes32, // callDataHash,
        address payable, // taker,
        bytes calldata data
    )
        external
        override
        returns (bytes4 success)
    {
        TokenFee[] memory fees = abi.decode(data, (TokenFee[]));

        // Transfer tokens to recipients.
        for (uint256 i = 0; i < fees.length; ++i) {
            uint256 amount = fees[i].amount;
            if (amount == MAX_UINT256) {
                amount = LibERC20Transformer.getTokenBalanceOf(fees[i].token, address(this));
            }
            if (amount != 0) {
                fees[i].token.transformerTransfer(fees[i].recipient, amount);
            }
        }

        return LibERC20Transformer.TRANSFORMER_SUCCESS;
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../errors/LibTransformERC20RichErrors.sol";
import "./IERC20Transformer.sol";


/// @dev Abstract base class for transformers.
abstract contract Transformer is
    IERC20Transformer
{
    using LibRichErrorsV06 for bytes;

    /// @dev The address of the deployer.
    address public immutable deployer;
    /// @dev The original address of this contract.
    address private immutable _implementation;

    /// @dev Create this contract.
    constructor() public {
        deployer = msg.sender;
        _implementation = address(this);
    }

    /// @dev Destruct this contract. Only callable by the deployer and will not
    ///      succeed in the context of a delegatecall (from another contract).
    /// @param ethRecipient The recipient of ETH held in this contract.
    function die(address payable ethRecipient)
        external
        virtual
    {
        // Only the deployer can call this.
        if (msg.sender != deployer) {
            LibTransformERC20RichErrors
                .OnlyCallableByDeployerError(msg.sender, deployer)
                .rrevert();
        }
        // Must be executing our own context.
        if (address(this) != _implementation) {
            LibTransformERC20RichErrors
                .InvalidExecutionContextError(address(this), _implementation)
                .rrevert();
        }
        selfdestruct(ethRecipient);
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibBytesV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/LibERC20TokenV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibSafeMathV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibMathV06.sol";
import "../errors/LibTransformERC20RichErrors.sol";
import "../vendor/v3/IExchange.sol";
import "./Transformer.sol";
import "./LibERC20Transformer.sol";


/// @dev A transformer that fills an ERC20 market sell/buy quote.
contract FillQuoteTransformer is
    Transformer
{
    using LibERC20TokenV06 for IERC20TokenV06;
    using LibERC20Transformer for IERC20TokenV06;
    using LibSafeMathV06 for uint256;
    using LibRichErrorsV06 for bytes;

    /// @dev Whether we are performing a market sell or buy.
    enum Side {
        Sell,
        Buy
    }

    /// @dev Transform data to ABI-encode and pass into `transform()`.
    struct TransformData {
        // Whether we aer performing a market sell or buy.
        Side side;
        // The token being sold.
        // This should be an actual token, not the ETH pseudo-token.
        IERC20TokenV06 sellToken;
        // The token being bought.
        // This should be an actual token, not the ETH pseudo-token.
        IERC20TokenV06 buyToken;
        // The orders to fill.
        IExchange.Order[] orders;
        // Signatures for each respective order in `orders`.
        bytes[] signatures;
        // Maximum fill amount for each order. This may be shorter than the
        // number of orders, where missing entries will be treated as `uint256(-1)`.
        // For sells, this will be the maximum sell amount (taker asset).
        // For buys, this will be the maximum buy amount (maker asset).
        uint256[] maxOrderFillAmounts;
        // Amount of `sellToken` to sell or `buyToken` to buy.
        // For sells, this may be `uint256(-1)` to sell the entire balance of
        // `sellToken`.
        uint256 fillAmount;
    }

    /// @dev Results of a call to `_fillOrder()`.
    struct FillOrderResults {
        // The amount of taker tokens sold, according to balance checks.
        uint256 takerTokenSoldAmount;
        // The amount of maker tokens sold, according to balance checks.
        uint256 makerTokenBoughtAmount;
        // The amount of protocol fee paid.
        uint256 protocolFeePaid;
    }

    /// @dev The Exchange ERC20Proxy ID.
    bytes4 private constant ERC20_ASSET_PROXY_ID = 0xf47261b0;
    /// @dev Maximum uint256 value.
    uint256 private constant MAX_UINT256 = uint256(-1);

    /// @dev The Exchange contract.
    IExchange public immutable exchange;
    /// @dev The ERC20Proxy address.
    address public immutable erc20Proxy;

    /// @dev Create this contract.
    /// @param exchange_ The Exchange V3 instance.
    constructor(IExchange exchange_)
        public
        Transformer()
    {
        exchange = exchange_;
        erc20Proxy = exchange_.getAssetProxy(ERC20_ASSET_PROXY_ID);
    }

    /// @dev Sell this contract's entire balance of of `sellToken` in exchange
    ///      for `buyToken` by filling `orders`. Protocol fees should be attached
    ///      to this call. `buyToken` and excess ETH will be transferred back to the caller.
    /// @param data_ ABI-encoded `TransformData`.
    /// @return success The success bytes (`LibERC20Transformer.TRANSFORMER_SUCCESS`).
    function transform(
        bytes32, // callDataHash,
        address payable, // taker,
        bytes calldata data_
    )
        external
        override
        returns (bytes4 success)
    {
        TransformData memory data = abi.decode(data_, (TransformData));

        // Validate data fields.
        if (data.sellToken.isTokenETH() || data.buyToken.isTokenETH()) {
            LibTransformERC20RichErrors.InvalidTransformDataError(
                LibTransformERC20RichErrors.InvalidTransformDataErrorCode.INVALID_TOKENS,
                data_
            ).rrevert();
        }
        if (data.orders.length != data.signatures.length) {
            LibTransformERC20RichErrors.InvalidTransformDataError(
                LibTransformERC20RichErrors.InvalidTransformDataErrorCode.INVALID_ARRAY_LENGTH,
                data_
            ).rrevert();
        }

        if (data.side == Side.Sell && data.fillAmount == MAX_UINT256) {
            // If `sellAmount == -1 then we are selling
            // the entire balance of `sellToken`. This is useful in cases where
            // the exact sell amount is not exactly known in advance, like when
            // unwrapping Chai/cUSDC/cDAI.
            data.fillAmount = data.sellToken.getTokenBalanceOf(address(this));
        }

        // Approve the ERC20 proxy to spend `sellToken`.
        data.sellToken.approveIfBelow(erc20Proxy, data.fillAmount);

        // Fill the orders.
        uint256 singleProtocolFee = exchange.protocolFeeMultiplier().safeMul(tx.gasprice);
        uint256 ethRemaining = address(this).balance;
        uint256 boughtAmount = 0;
        uint256 soldAmount = 0;
        for (uint256 i = 0; i < data.orders.length; ++i) {
            // Check if we've hit our targets.
            if (data.side == Side.Sell) {
                // Market sell check.
                if (soldAmount >= data.fillAmount) {
                    break;
                }
            } else {
                // Market buy check.
                if (boughtAmount >= data.fillAmount) {
                    break;
                }
            }

            // Ensure we have enough ETH to cover the protocol fee.
            if (ethRemaining < singleProtocolFee) {
                LibTransformERC20RichErrors
                    .InsufficientProtocolFeeError(ethRemaining, singleProtocolFee)
                    .rrevert();
            }

            // Fill the order.
            FillOrderResults memory results;
            if (data.side == Side.Sell) {
                // Market sell.
                results = _sellToOrder(
                    data.buyToken,
                    data.sellToken,
                    data.orders[i],
                    data.signatures[i],
                    data.fillAmount.safeSub(soldAmount).min256(
                        data.maxOrderFillAmounts.length > i
                        ? data.maxOrderFillAmounts[i]
                        : MAX_UINT256
                    ),
                    singleProtocolFee
                );
            } else {
                // Market buy.
                results = _buyFromOrder(
                    data.buyToken,
                    data.sellToken,
                    data.orders[i],
                    data.signatures[i],
                    data.fillAmount.safeSub(boughtAmount).min256(
                        data.maxOrderFillAmounts.length > i
                        ? data.maxOrderFillAmounts[i]
                        : MAX_UINT256
                    ),
                    singleProtocolFee
                );
            }

            // Accumulate totals.
            soldAmount = soldAmount.safeAdd(results.takerTokenSoldAmount);
            boughtAmount = boughtAmount.safeAdd(results.makerTokenBoughtAmount);
            ethRemaining = ethRemaining.safeSub(results.protocolFeePaid);
        }

        // Ensure we hit our targets.
        if (data.side == Side.Sell) {
            // Market sell check.
            if (soldAmount < data.fillAmount) {
                LibTransformERC20RichErrors
                    .IncompleteFillSellQuoteError(
                        address(data.sellToken),
                        soldAmount,
                        data.fillAmount
                    ).rrevert();
            }
        } else {
            // Market buy check.
            if (boughtAmount < data.fillAmount) {
                LibTransformERC20RichErrors
                    .IncompleteFillBuyQuoteError(
                        address(data.buyToken),
                        boughtAmount,
                        data.fillAmount
                    ).rrevert();
            }
        }
        return LibERC20Transformer.TRANSFORMER_SUCCESS;
    }

    /// @dev Try to sell up to `sellAmount` from an order.
    /// @param makerToken The maker/buy token.
    /// @param takerToken The taker/sell token.
    /// @param order The order to fill.
    /// @param signature The signature for `order`.
    /// @param sellAmount Amount of taker token to sell.
    /// @param protocolFee The protocol fee needed to fill `order`.
    function _sellToOrder(
        IERC20TokenV06 makerToken,
        IERC20TokenV06 takerToken,
        IExchange.Order memory order,
        bytes memory signature,
        uint256 sellAmount,
        uint256 protocolFee
    )
        private
        returns (FillOrderResults memory results)
    {
        IERC20TokenV06 takerFeeToken =
            _getTokenFromERC20AssetData(order.takerFeeAssetData);

        uint256 takerTokenFillAmount = sellAmount;

        if (order.takerFee != 0) {
            if (takerFeeToken == makerToken) {
                // Taker fee is payable in the maker token, so we need to
                // approve the proxy to spend the maker token.
                // It isn't worth computing the actual taker fee
                // since `approveIfBelow()` will set the allowance to infinite. We
                // just need a reasonable upper bound to avoid unnecessarily re-approving.
                takerFeeToken.approveIfBelow(erc20Proxy, order.takerFee);
            } else if (takerFeeToken == takerToken){
                // Taker fee is payable in the taker token, so we need to
                // reduce the fill amount to cover the fee.
                // takerTokenFillAmount' =
                //   (takerTokenFillAmount * order.takerAssetAmount) /
                //   (order.takerAssetAmount + order.takerFee)
                takerTokenFillAmount = LibMathV06.getPartialAmountCeil(
                    order.takerAssetAmount,
                    order.takerAssetAmount.safeAdd(order.takerFee),
                    sellAmount
                );
            } else {
                //  Only support taker or maker asset denominated taker fees.
                LibTransformERC20RichErrors.InvalidTakerFeeTokenError(
                    address(takerFeeToken)
                ).rrevert();
            }
        }

        // Clamp fill amount to order size.
        takerTokenFillAmount = LibSafeMathV06.min256(
            takerTokenFillAmount,
            order.takerAssetAmount
        );

        // Perform the fill.
        return _fillOrder(
            order,
            signature,
            takerTokenFillAmount,
            protocolFee,
            makerToken,
            takerFeeToken == takerToken
        );
    }

    /// @dev Try to buy up to `buyAmount` from an order.
    /// @param makerToken The maker/buy token.
    /// @param takerToken The taker/sell token.
    /// @param order The order to fill.
    /// @param signature The signature for `order`.
    /// @param buyAmount Amount of maker token to buy.
    /// @param protocolFee The protocol fee needed to fill `order`.
    function _buyFromOrder(
        IERC20TokenV06 makerToken,
        IERC20TokenV06 takerToken,
        IExchange.Order memory order,
        bytes memory signature,
        uint256 buyAmount,
        uint256 protocolFee
    )
        private
        returns (FillOrderResults memory results)
    {
        IERC20TokenV06 takerFeeToken =
            _getTokenFromERC20AssetData(order.takerFeeAssetData);
        // Compute the default taker token fill amount.
        uint256 takerTokenFillAmount = LibMathV06.getPartialAmountCeil(
            buyAmount,
            order.makerAssetAmount,
            order.takerAssetAmount
        );

        if (order.takerFee != 0) {
            if (takerFeeToken == makerToken) {
                // Taker fee is payable in the maker token.
                // Adjust the taker token fill amount to account for maker
                // tokens being lost to the taker fee.
                // takerTokenFillAmount' =
                //  (order.takerAssetAmount * buyAmount) /
                //  (order.makerAssetAmount - order.takerFee)
                takerTokenFillAmount = LibMathV06.getPartialAmountCeil(
                    buyAmount,
                    order.makerAssetAmount.safeSub(order.takerFee),
                    order.takerAssetAmount
                );
                // Approve the proxy to spend the maker token.
                // It isn't worth computing the actual taker fee
                // since `approveIfBelow()` will set the allowance to infinite. We
                // just need a reasonable upper bound to avoid unnecessarily re-approving.
                takerFeeToken.approveIfBelow(erc20Proxy, order.takerFee);
            } else if (takerFeeToken != takerToken) {
                //  Only support taker or maker asset denominated taker fees.
                LibTransformERC20RichErrors.InvalidTakerFeeTokenError(
                    address(takerFeeToken)
                ).rrevert();
            }
        }

        // Clamp to order size.
        takerTokenFillAmount = LibSafeMathV06.min256(
            order.takerAssetAmount,
            takerTokenFillAmount
        );

        // Perform the fill.
        return _fillOrder(
            order,
            signature,
            takerTokenFillAmount,
            protocolFee,
            makerToken,
            takerFeeToken == takerToken
        );
    }

    /// @dev Attempt to fill an order. If the fill reverts, the revert will be
    ///      swallowed and `results` will be zeroed out.
    /// @param order The order to fill.
    /// @param signature The order signature.
    /// @param takerAssetFillAmount How much taker asset to fill.
    /// @param protocolFee The protocol fee needed to fill this order.
    /// @param makerToken The maker token.
    /// @param isTakerFeeInTakerToken Whether the taker fee token is the same as the
    ///        taker token.
    function _fillOrder(
        IExchange.Order memory order,
        bytes memory signature,
        uint256 takerAssetFillAmount,
        uint256 protocolFee,
        IERC20TokenV06 makerToken,
        bool isTakerFeeInTakerToken
    )
        private
        returns (FillOrderResults memory results)
    {
        // Track changes in the maker token balance.
        uint256 initialMakerTokenBalance = makerToken.balanceOf(address(this));
        try
            exchange.fillOrder
                {value: protocolFee}
                (order, takerAssetFillAmount, signature)
            returns (IExchange.FillResults memory fillResults)
        {
            // Update maker quantity based on changes in token balances.
            results.makerTokenBoughtAmount = makerToken.balanceOf(address(this))
                .safeSub(initialMakerTokenBalance);
            // We can trust the other fill result quantities.
            results.protocolFeePaid = fillResults.protocolFeePaid;
            results.takerTokenSoldAmount = fillResults.takerAssetFilledAmount;
            // If the taker fee is payable in the taker asset, include the
            // taker fee in the total amount sold.
            if (isTakerFeeInTakerToken) {
                results.takerTokenSoldAmount =
                    results.takerTokenSoldAmount.safeAdd(fillResults.takerFeePaid);
            }
        } catch (bytes memory) {
            // Swallow failures, leaving all results as zero.
        }
    }

    /// @dev Extract the token from plain ERC20 asset data.
    ///      If the asset-data is empty, a zero token address will be returned.
    /// @param assetData The order asset data.
    function _getTokenFromERC20AssetData(bytes memory assetData)
        private
        pure
        returns (IERC20TokenV06 token)
    {
        if (assetData.length == 0) {
            return IERC20TokenV06(address(0));
        }
        if (assetData.length != 36 ||
            LibBytesV06.readBytes4(assetData, 0) != ERC20_ASSET_PROXY_ID)
        {
            LibTransformERC20RichErrors
                .InvalidERC20AssetDataError(assetData)
                .rrevert();
        }
        return IERC20TokenV06(LibBytesV06.readAddress(assetData, 16));
    }
}

/*

  Copyright 2019 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;

import "./LibSafeMathV06.sol";
import "./errors/LibRichErrorsV06.sol";
import "./errors/LibMathRichErrorsV06.sol";


library LibMathV06 {

    using LibSafeMathV06 for uint256;

    /// @dev Calculates partial value given a numerator and denominator rounded down.
    ///      Reverts if rounding error is >= 0.1%
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to calculate partial of.
    /// @return partialAmount Partial value of target rounded down.
    function safeGetPartialAmountFloor(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (uint256 partialAmount)
    {
        if (isRoundingErrorFloor(
                numerator,
                denominator,
                target
        )) {
            LibRichErrorsV06.rrevert(LibMathRichErrorsV06.RoundingError(
                numerator,
                denominator,
                target
            ));
        }

        partialAmount = numerator.safeMul(target).safeDiv(denominator);
        return partialAmount;
    }

    /// @dev Calculates partial value given a numerator and denominator rounded down.
    ///      Reverts if rounding error is >= 0.1%
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to calculate partial of.
    /// @return partialAmount Partial value of target rounded up.
    function safeGetPartialAmountCeil(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (uint256 partialAmount)
    {
        if (isRoundingErrorCeil(
                numerator,
                denominator,
                target
        )) {
            LibRichErrorsV06.rrevert(LibMathRichErrorsV06.RoundingError(
                numerator,
                denominator,
                target
            ));
        }

        // safeDiv computes `floor(a / b)`. We use the identity (a, b integer):
        //       ceil(a / b) = floor((a + b - 1) / b)
        // To implement `ceil(a / b)` using safeDiv.
        partialAmount = numerator.safeMul(target)
            .safeAdd(denominator.safeSub(1))
            .safeDiv(denominator);

        return partialAmount;
    }

    /// @dev Calculates partial value given a numerator and denominator rounded down.
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to calculate partial of.
    /// @return partialAmount Partial value of target rounded down.
    function getPartialAmountFloor(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (uint256 partialAmount)
    {
        partialAmount = numerator.safeMul(target).safeDiv(denominator);
        return partialAmount;
    }

    /// @dev Calculates partial value given a numerator and denominator rounded down.
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to calculate partial of.
    /// @return partialAmount Partial value of target rounded up.
    function getPartialAmountCeil(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (uint256 partialAmount)
    {
        // safeDiv computes `floor(a / b)`. We use the identity (a, b integer):
        //       ceil(a / b) = floor((a + b - 1) / b)
        // To implement `ceil(a / b)` using safeDiv.
        partialAmount = numerator.safeMul(target)
            .safeAdd(denominator.safeSub(1))
            .safeDiv(denominator);

        return partialAmount;
    }

    /// @dev Checks if rounding error >= 0.1% when rounding down.
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to multiply with numerator/denominator.
    /// @return isError Rounding error is present.
    function isRoundingErrorFloor(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (bool isError)
    {
        if (denominator == 0) {
            LibRichErrorsV06.rrevert(LibMathRichErrorsV06.DivisionByZeroError());
        }

        // The absolute rounding error is the difference between the rounded
        // value and the ideal value. The relative rounding error is the
        // absolute rounding error divided by the absolute value of the
        // ideal value. This is undefined when the ideal value is zero.
        //
        // The ideal value is `numerator * target / denominator`.
        // Let's call `numerator * target % denominator` the remainder.
        // The absolute error is `remainder / denominator`.
        //
        // When the ideal value is zero, we require the absolute error to
        // be zero. Fortunately, this is always the case. The ideal value is
        // zero iff `numerator == 0` and/or `target == 0`. In this case the
        // remainder and absolute error are also zero.
        if (target == 0 || numerator == 0) {
            return false;
        }

        // Otherwise, we want the relative rounding error to be strictly
        // less than 0.1%.
        // The relative error is `remainder / (numerator * target)`.
        // We want the relative error less than 1 / 1000:
        //        remainder / (numerator * denominator)  <  1 / 1000
        // or equivalently:
        //        1000 * remainder  <  numerator * target
        // so we have a rounding error iff:
        //        1000 * remainder  >=  numerator * target
        uint256 remainder = mulmod(
            target,
            numerator,
            denominator
        );
        isError = remainder.safeMul(1000) >= numerator.safeMul(target);
        return isError;
    }

    /// @dev Checks if rounding error >= 0.1% when rounding up.
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to multiply with numerator/denominator.
    /// @return isError Rounding error is present.
    function isRoundingErrorCeil(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (bool isError)
    {
        if (denominator == 0) {
            LibRichErrorsV06.rrevert(LibMathRichErrorsV06.DivisionByZeroError());
        }

        // See the comments in `isRoundingError`.
        if (target == 0 || numerator == 0) {
            // When either is zero, the ideal value and rounded value are zero
            // and there is no rounding error. (Although the relative error
            // is undefined.)
            return false;
        }
        // Compute remainder as before
        uint256 remainder = mulmod(
            target,
            numerator,
            denominator
        );
        remainder = denominator.safeSub(remainder) % denominator;
        isError = remainder.safeMul(1000) >= numerator.safeMul(target);
        return isError;
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;


library LibMathRichErrorsV06 {

    // bytes4(keccak256("DivisionByZeroError()"))
    bytes internal constant DIVISION_BY_ZERO_ERROR =
        hex"a791837c";

    // bytes4(keccak256("RoundingError(uint256,uint256,uint256)"))
    bytes4 internal constant ROUNDING_ERROR_SELECTOR =
        0x339f3de2;

    // solhint-disable func-name-mixedcase
    function DivisionByZeroError()
        internal
        pure
        returns (bytes memory)
    {
        return DIVISION_BY_ZERO_ERROR;
    }

    function RoundingError(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            ROUNDING_ERROR_SELECTOR,
            numerator,
            denominator,
            target
        );
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;


/// @dev Interface to the V3 Exchange.
interface IExchange {

    /// @dev V3 Order structure.
    struct Order {
        // Address that created the order.
        address makerAddress;
        // Address that is allowed to fill the order.
        // If set to 0, any address is allowed to fill the order.
        address takerAddress;
        // Address that will recieve fees when order is filled.
        address feeRecipientAddress;
        // Address that is allowed to call Exchange contract methods that affect this order.
        // If set to 0, any address is allowed to call these methods.
        address senderAddress;
        // Amount of makerAsset being offered by maker. Must be greater than 0.
        uint256 makerAssetAmount;
        // Amount of takerAsset being bid on by maker. Must be greater than 0.
        uint256 takerAssetAmount;
        // Fee paid to feeRecipient by maker when order is filled.
        uint256 makerFee;
        // Fee paid to feeRecipient by taker when order is filled.
        uint256 takerFee;
        // Timestamp in seconds at which order expires.
        uint256 expirationTimeSeconds;
        // Arbitrary number to facilitate uniqueness of the order's hash.
        uint256 salt;
        // Encoded data that can be decoded by a specified proxy contract when transferring makerAsset.
        // The leading bytes4 references the id of the asset proxy.
        bytes makerAssetData;
        // Encoded data that can be decoded by a specified proxy contract when transferring takerAsset.
        // The leading bytes4 references the id of the asset proxy.
        bytes takerAssetData;
        // Encoded data that can be decoded by a specified proxy contract when transferring makerFeeAsset.
        // The leading bytes4 references the id of the asset proxy.
        bytes makerFeeAssetData;
        // Encoded data that can be decoded by a specified proxy contract when transferring takerFeeAsset.
        // The leading bytes4 references the id of the asset proxy.
        bytes takerFeeAssetData;
    }

    /// @dev V3 `fillOrder()` results.`
    struct FillResults {
        // Total amount of makerAsset(s) filled.
        uint256 makerAssetFilledAmount;
        // Total amount of takerAsset(s) filled.
        uint256 takerAssetFilledAmount;
        // Total amount of fees paid by maker(s) to feeRecipient(s).
        uint256 makerFeePaid;
        // Total amount of fees paid by taker to feeRecipients(s).
        uint256 takerFeePaid;
        // Total amount of fees paid by taker to the staking contract.
        uint256 protocolFeePaid;
    }

    /// @dev Fills the input order.
    /// @param order Order struct containing order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signature Proof that order has been created by maker.
    /// @return fillResults Amounts filled and fees paid by maker and taker.
    function fillOrder(
        Order calldata order,
        uint256 takerAssetFillAmount,
        bytes calldata signature
    )
        external
        payable
        returns (FillResults memory fillResults);

    /// @dev Returns the protocolFeeMultiplier
    /// @return multiplier The multiplier for protocol fees.
    function protocolFeeMultiplier()
        external
        view
        returns (uint256 multiplier);

    /// @dev Gets an asset proxy.
    /// @param assetProxyId Id of the asset proxy.
    /// @return proxyAddress The asset proxy registered to assetProxyId.
    ///         Returns 0x0 if no proxy is registered.
    function getAssetProxy(bytes4 assetProxyId)
        external
        view
        returns (address proxyAddress);
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibSafeMathV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/LibERC20TokenV06.sol";
import "../errors/LibTransformERC20RichErrors.sol";
import "./Transformer.sol";
import "./LibERC20Transformer.sol";


/// @dev A transformer that transfers tokens to the taker.
contract PayTakerTransformer is
    Transformer
{
    // solhint-disable no-empty-blocks
    using LibRichErrorsV06 for bytes;
    using LibSafeMathV06 for uint256;
    using LibERC20Transformer for IERC20TokenV06;

    /// @dev Transform data to ABI-encode and pass into `transform()`.
    struct TransformData {
        // The tokens to transfer to the taker.
        IERC20TokenV06[] tokens;
        // Amount of each token in `tokens` to transfer to the taker.
        // `uint(-1)` will transfer the entire balance.
        uint256[] amounts;
    }

    /// @dev Maximum uint256 value.
    uint256 private constant MAX_UINT256 = uint256(-1);

    /// @dev Create this contract.
    constructor()
        public
        Transformer()
    {}

    /// @dev Forwards tokens to the taker.
    /// @param taker The taker address (caller of `TransformERC20.transformERC20()`).
    /// @param data_ ABI-encoded `TransformData`, indicating which tokens to transfer.
    /// @return success The success bytes (`LibERC20Transformer.TRANSFORMER_SUCCESS`).
    function transform(
        bytes32, // callDataHash,
        address payable taker,
        bytes calldata data_
    )
        external
        override
        returns (bytes4 success)
    {
        TransformData memory data = abi.decode(data_, (TransformData));

        // Transfer tokens directly to the taker.
        for (uint256 i = 0; i < data.tokens.length; ++i) {
            // The `amounts` array can be shorter than the `tokens` array.
            // Missing elements are treated as `uint256(-1)`.
            uint256 amount = data.amounts.length > i ? data.amounts[i] : uint256(-1);
            if (amount == MAX_UINT256) {
                amount = data.tokens[i].getTokenBalanceOf(address(this));
            }
            if (amount != 0) {
                data.tokens[i].transformerTransfer(taker, amount);
            }
        }
        return LibERC20Transformer.TRANSFORMER_SUCCESS;
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibSafeMathV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/IEtherTokenV06.sol";
import "../errors/LibTransformERC20RichErrors.sol";
import "./Transformer.sol";
import "./LibERC20Transformer.sol";


/// @dev A transformer that wraps or unwraps WETH.
contract WethTransformer is
    Transformer
{
    using LibRichErrorsV06 for bytes;
    using LibSafeMathV06 for uint256;
    using LibERC20Transformer for IERC20TokenV06;

    /// @dev Transform data to ABI-encode and pass into `transform()`.
    struct TransformData {
        // The token to wrap/unwrap. Must be either ETH or WETH.
        IERC20TokenV06 token;
        // Amount of `token` to wrap or unwrap.
        // `uint(-1)` will unwrap the entire balance.
        uint256 amount;
    }

    /// @dev The WETH contract address.
    IEtherTokenV06 public immutable weth;
    /// @dev Maximum uint256 value.
    uint256 private constant MAX_UINT256 = uint256(-1);

    /// @dev Construct the transformer and store the WETH address in an immutable.
    /// @param weth_ The weth token.
    constructor(IEtherTokenV06 weth_)
        public
        Transformer()
    {
        weth = weth_;
    }

    /// @dev Wraps and unwraps WETH.
    /// @param data_ ABI-encoded `TransformData`, indicating which token to wrap/umwrap.
    /// @return success The success bytes (`LibERC20Transformer.TRANSFORMER_SUCCESS`).
    function transform(
        bytes32, // callDataHash,
        address payable, // taker,
        bytes calldata data_
    )
        external
        override
        returns (bytes4 success)
    {
        TransformData memory data = abi.decode(data_, (TransformData));
        if (!data.token.isTokenETH() && data.token != weth) {
            LibTransformERC20RichErrors.InvalidTransformDataError(
                LibTransformERC20RichErrors.InvalidTransformDataErrorCode.INVALID_TOKENS,
                data_
            ).rrevert();
        }

        uint256 amount = data.amount;
        if (amount == MAX_UINT256) {
            amount = data.token.getTokenBalanceOf(address(this));
        }

        if (amount != 0) {
            if (data.token.isTokenETH()) {
                // Wrap ETH.
                weth.deposit{value: amount}();
            } else {
                // Unwrap WETH.
                weth.withdraw(amount);
            }
        }
        return LibERC20Transformer.TRANSFORMER_SUCCESS;
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;

import "./IERC20TokenV06.sol";


interface IEtherTokenV06 is
    IERC20TokenV06
{
    /// @dev Wrap ether.
    function deposit() external payable;

    /// @dev Unwrap ether.
    function withdraw(uint256 amount) external;
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;


interface ITestSimpleFunctionRegistryFeature {
    function testFn() external view returns (uint256 id);
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;


contract TestCallTarget {

    event CallTargetCalled(
        address context,
        address sender,
        bytes data,
        uint256 value
    );

    bytes4 private constant MAGIC_BYTES = 0x12345678;
    bytes private constant REVERTING_DATA = hex"1337";

    fallback() external payable {
        if (keccak256(msg.data) == keccak256(REVERTING_DATA)) {
            revert("TestCallTarget/REVERT");
        }
        emit CallTargetCalled(
            address(this),
            msg.sender,
            msg.data,
            msg.value
        );
        bytes4 rval = MAGIC_BYTES;
        assembly {
            mstore(0, rval)
            return(0, 32)
        }
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;


contract TestDelegateCaller {
    function executeDelegateCall(
        address target,
        bytes calldata callData
    )
        external
    {
        (bool success, bytes memory resultData) = target.delegatecall(callData);
        if (!success) {
            assembly { revert(add(resultData, 32), mload(resultData)) }
        }
        assembly { return(add(resultData, 32), mload(resultData)) }
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-utils/contracts/src/v06/LibBytesV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibMathV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibSafeMathV06.sol";
import "../src/vendor/v3/IExchange.sol";
import "./TestMintableERC20Token.sol";


contract TestFillQuoteTransformerExchange {

    struct FillBehavior {
        // How much of the order is filled, in taker asset amount.
        uint256 filledTakerAssetAmount;
        // Scaling for maker assets minted, in 1e18.
        uint256 makerAssetMintRatio;
    }

    uint256 private constant PROTOCOL_FEE_MULTIPLIER = 1337;

    using LibSafeMathV06 for uint256;

    function fillOrder(
        IExchange.Order calldata order,
        uint256 takerAssetFillAmount,
        bytes calldata signature
    )
        external
        payable
        returns (IExchange.FillResults memory fillResults)
    {
        require(
            signature.length != 0,
            "TestFillQuoteTransformerExchange/INVALID_SIGNATURE"
        );
        // The signature is the ABI-encoded FillBehavior data.
        FillBehavior memory behavior = abi.decode(signature, (FillBehavior));

        uint256 protocolFee = PROTOCOL_FEE_MULTIPLIER * tx.gasprice;
        require(
            msg.value == protocolFee,
            "TestFillQuoteTransformerExchange/INSUFFICIENT_PROTOCOL_FEE"
        );
        // Return excess protocol fee.
        msg.sender.transfer(msg.value - protocolFee);

        // Take taker tokens.
        TestMintableERC20Token takerToken = _getTokenFromAssetData(order.takerAssetData);
        takerAssetFillAmount = LibSafeMathV06.min256(
            order.takerAssetAmount.safeSub(behavior.filledTakerAssetAmount),
            takerAssetFillAmount
        );
        require(
            takerToken.getSpendableAmount(msg.sender, address(this)) >= takerAssetFillAmount,
            "TestFillQuoteTransformerExchange/INSUFFICIENT_TAKER_FUNDS"
        );
        takerToken.transferFrom(msg.sender, order.makerAddress, takerAssetFillAmount);

        // Mint maker tokens.
        uint256 makerAssetFilledAmount = LibMathV06.getPartialAmountFloor(
            takerAssetFillAmount,
            order.takerAssetAmount,
            order.makerAssetAmount
        );
        TestMintableERC20Token makerToken = _getTokenFromAssetData(order.makerAssetData);
        makerToken.mint(
            msg.sender,
            LibMathV06.getPartialAmountFloor(
                behavior.makerAssetMintRatio,
                1e18,
                makerAssetFilledAmount
            )
        );

        // Take taker fee.
        TestMintableERC20Token takerFeeToken = _getTokenFromAssetData(order.takerFeeAssetData);
        uint256 takerFee = LibMathV06.getPartialAmountFloor(
            takerAssetFillAmount,
            order.takerAssetAmount,
            order.takerFee
        );
        require(
            takerFeeToken.getSpendableAmount(msg.sender, address(this)) >= takerFee,
            "TestFillQuoteTransformerExchange/INSUFFICIENT_TAKER_FEE_FUNDS"
        );
        takerFeeToken.transferFrom(msg.sender, order.feeRecipientAddress, takerFee);

        fillResults.makerAssetFilledAmount = makerAssetFilledAmount;
        fillResults.takerAssetFilledAmount = takerAssetFillAmount;
        fillResults.makerFeePaid = uint256(-1);
        fillResults.takerFeePaid = takerFee;
        fillResults.protocolFeePaid = protocolFee;
    }

    function encodeBehaviorData(FillBehavior calldata behavior)
        external
        pure
        returns (bytes memory encoded)
    {
        return abi.encode(behavior);
    }

    function protocolFeeMultiplier()
        external
        pure
        returns (uint256)
    {
        return PROTOCOL_FEE_MULTIPLIER;
    }

    function getAssetProxy(bytes4)
        external
        view
        returns (address)
    {
        return address(this);
    }

    function _getTokenFromAssetData(bytes memory assetData)
        private
        pure
        returns (TestMintableERC20Token token)
    {
        return TestMintableERC20Token(LibBytesV06.readAddress(assetData, 16));
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;


contract TestMintableERC20Token {

    mapping(address => uint256) public balanceOf;
    mapping(address => mapping(address => uint256)) public allowance;

    function transfer(address to, uint256 amount)
        external
        virtual
        returns (bool)
    {
        return transferFrom(msg.sender, to, amount);
    }

    function approve(address spender, uint256 amount)
        external
        virtual
        returns (bool)
    {
        allowance[msg.sender][spender] = amount;
        return true;
    }

    function mint(address owner, uint256 amount)
        external
        virtual
    {
        balanceOf[owner] += amount;
    }

    function burn(address owner, uint256 amount)
        external
        virtual
    {
        require(balanceOf[owner] >= amount, "TestMintableERC20Token/INSUFFICIENT_FUNDS");
        balanceOf[owner] -= amount;
    }

    function transferFrom(address from, address to, uint256 amount)
        public
        virtual
        returns (bool)
    {
        if (from != msg.sender) {
            require(
                allowance[from][msg.sender] >= amount,
                "TestMintableERC20Token/INSUFFICIENT_ALLOWANCE"
            );
            allowance[from][msg.sender] -= amount;
        }
        require(balanceOf[from] >= amount, "TestMintableERC20Token/INSUFFICIENT_FUNDS");
        balanceOf[from] -= amount;
        balanceOf[to] += amount;
        return true;
    }

    function getSpendableAmount(address owner, address spender)
        external
        view
        returns (uint256)
    {
        return balanceOf[owner] < allowance[owner][spender]
            ? balanceOf[owner]
            : allowance[owner][spender];
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "../src/transformers/IERC20Transformer.sol";
import "./TestMintableERC20Token.sol";
import "./TestTransformerHost.sol";


contract TestFillQuoteTransformerHost is
    TestTransformerHost
{
    function executeTransform(
        IERC20Transformer transformer,
        TestMintableERC20Token inputToken,
        uint256 inputTokenAmount,
        bytes calldata data
    )
        external
        payable
    {
        if (inputTokenAmount != 0) {
            inputToken.mint(address(this), inputTokenAmount);
        }
        // Have to make this call externally because transformers aren't payable.
        this.rawExecuteTransform(transformer, bytes32(0), msg.sender, data);
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "../src/transformers/IERC20Transformer.sol";
import "../src/transformers/LibERC20Transformer.sol";


contract TestTransformerHost {

    using LibERC20Transformer for IERC20TokenV06;
    using LibRichErrorsV06 for bytes;

    function rawExecuteTransform(
        IERC20Transformer transformer,
        bytes32 callDataHash,
        address taker,
        bytes calldata data
    )
        external
    {
        (bool _success, bytes memory resultData) =
            address(transformer).delegatecall(abi.encodeWithSelector(
                transformer.transform.selector,
                callDataHash,
                taker,
                data
            ));
        if (!_success) {
            resultData.rrevert();
        }
        require(
            abi.decode(resultData, (bytes4)) == LibERC20Transformer.TRANSFORMER_SUCCESS,
            "TestTransformerHost/INVALID_TRANSFORMER_RESULT"
        );
    }

    // solhint-disable
    receive() external payable {}
    // solhint-enable
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "../src/ZeroEx.sol";
import "../src/features/IBootstrap.sol";
import "../src/migrations/FullMigration.sol";


contract TestFullMigration is
    FullMigration
{
    address public dieRecipient;

    // solhint-disable-next-line no-empty-blocks
    constructor(address payable deployer) public FullMigration(deployer) {}

    function die(address payable ethRecipient) external override {
        dieRecipient = ethRecipient;
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "../src/ZeroEx.sol";
import "../src/features/IBootstrap.sol";
import "../src/migrations/InitialMigration.sol";


contract TestInitialMigration is
    InitialMigration
{
    address public bootstrapFeature;
    address public dieRecipient;

    // solhint-disable-next-line no-empty-blocks
    constructor(address deployer) public InitialMigration(deployer) {}

    function callBootstrap(ZeroEx zeroEx) external {
        IBootstrap(address(zeroEx)).bootstrap(address(this), new bytes(0));
    }

    function bootstrap(address owner, BootstrapFeatures memory features)
        public
        override
        returns (bytes4 success)
    {
        success = InitialMigration.bootstrap(owner, features);
        // Snoop the bootstrap feature contract.
        bootstrapFeature = ZeroEx(address(uint160(address(this))))
            .getFunctionImplementation(IBootstrap.bootstrap.selector);
    }

    function die(address payable ethRecipient) public override {
        dieRecipient = ethRecipient;
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "../src/migrations/LibMigrate.sol";
import "../src/features/IOwnable.sol";


contract TestMigrator {
    event TestMigrateCalled(
        bytes callData,
        address owner
    );

    function succeedingMigrate() external returns (bytes4 success) {
        emit TestMigrateCalled(
            msg.data,
            IOwnable(address(this)).owner()
        );
        return LibMigrate.MIGRATE_SUCCESS;
    }

    function failingMigrate() external returns (bytes4 success) {
        emit TestMigrateCalled(
            msg.data,
            IOwnable(address(this)).owner()
        );
        return 0xdeadbeef;
    }

    function revertingMigrate() external pure {
        revert("OOPSIE");
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "../src/transformers/IERC20Transformer.sol";
import "../src/transformers/LibERC20Transformer.sol";
import "./TestMintableERC20Token.sol";


contract TestMintTokenERC20Transformer is
    IERC20Transformer
{
    struct TransformData {
        IERC20TokenV06 inputToken;
        TestMintableERC20Token outputToken;
        uint256 burnAmount;
        uint256 mintAmount;
        uint256 feeAmount;
    }

    event MintTransform(
        address context,
        address caller,
        bytes32 callDataHash,
        address taker,
        bytes data,
        uint256 inputTokenBalance,
        uint256 ethBalance
    );

    function transform(
        bytes32 callDataHash,
        address payable taker,
        bytes calldata data_
    )
        external
        override
        returns (bytes4 success)
    {
        TransformData memory data = abi.decode(data_, (TransformData));
        emit MintTransform(
            address(this),
            msg.sender,
            callDataHash,
            taker,
            data_,
            data.inputToken.balanceOf(address(this)),
            address(this).balance
        );
        // "Burn" input tokens.
        data.inputToken.transfer(address(0), data.burnAmount);
        // Mint output tokens.
        if (LibERC20Transformer.isTokenETH(IERC20TokenV06(address(data.outputToken)))) {
            taker.transfer(data.mintAmount);
        } else {
            data.outputToken.mint(
                taker,
                data.mintAmount
            );
            // Burn fees from output.
            data.outputToken.burn(taker, data.feeAmount);
        }
        return LibERC20Transformer.TRANSFORMER_SUCCESS;
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "../src/fixins/FixinCommon.sol";


contract TestSimpleFunctionRegistryFeatureImpl1 is
    FixinCommon
{
    function testFn()
        external
        pure
        returns (uint256 id)
    {
        return 1337;
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "../src/fixins/FixinCommon.sol";


contract TestSimpleFunctionRegistryFeatureImpl2 is
    FixinCommon
{
    function testFn()
        external
        pure
        returns (uint256 id)
    {
        return 1338;
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "../src/features/TokenSpender.sol";

contract TestTokenSpender is
    TokenSpender
{
    modifier onlySelf() override {
        _;
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "./TestMintableERC20Token.sol";


contract TestTokenSpenderERC20Token is
    TestMintableERC20Token
{

    event TransferFromCalled(
        address sender,
        address from,
        address to,
        uint256 amount
    );

    // `transferFrom()` behavior depends on the value of `amount`.
    uint256 constant private EMPTY_RETURN_AMOUNT = 1337;
    uint256 constant private FALSE_RETURN_AMOUNT = 1338;
    uint256 constant private REVERT_RETURN_AMOUNT = 1339;

    function transferFrom(address from, address to, uint256 amount)
        public
        override
        returns (bool)
    {
        emit TransferFromCalled(msg.sender, from, to, amount);
        if (amount == EMPTY_RETURN_AMOUNT) {
            assembly { return(0, 0) }
        }
        if (amount == FALSE_RETURN_AMOUNT) {
            return false;
        }
        if (amount == REVERT_RETURN_AMOUNT) {
            revert("TestTokenSpenderERC20Token/Revert");
        }
        return true;
    }

    function setBalanceAndAllowanceOf(
        address owner,
        uint256 balance,
        address spender,
        uint256 allowance_
    )
        external
    {
        balanceOf[owner] = balance;
        allowance[owner][spender] = allowance_;
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "../src/features/TransformERC20.sol";


contract TestTransformERC20 is
    TransformERC20
{
    // solhint-disable no-empty-blocks
    constructor()
        TransformERC20()
        public
    {}

    modifier onlySelf() override {
        _;
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "../src/transformers/Transformer.sol";
import "../src/transformers/LibERC20Transformer.sol";


contract TestTransformerBase is
    Transformer
{
    function transform(
        bytes32,
        address payable,
        bytes calldata
    )
        external
        override
        returns (bytes4 success)
    {
        return LibERC20Transformer.TRANSFORMER_SUCCESS;
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "../src/transformers/LibERC20Transformer.sol";


contract TestTransformerDeployerTransformer {

    address payable public immutable deployer;

    constructor() public payable {
        deployer = msg.sender;
    }

    modifier onlyDeployer() {
        require(msg.sender == deployer, "TestTransformerDeployerTransformer/ONLY_DEPLOYER");
        _;
    }

    function die()
        external
        onlyDeployer
    {
        selfdestruct(deployer);
    }

    function isDeployedByDeployer(uint32 nonce)
        external
        view
        returns (bool)
    {
        return LibERC20Transformer.getDeployedAddress(deployer, nonce) == address(this);
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "./TestMintableERC20Token.sol";


contract TestWeth is
    TestMintableERC20Token
{
    function deposit()
        external
        payable
    {
        this.mint(msg.sender, msg.value);
    }

    function withdraw(uint256 amount)
        external
    {
        require(balanceOf[msg.sender] >= amount, "TestWeth/INSUFFICIENT_FUNDS");
        balanceOf[msg.sender] -= amount;
        msg.sender.transfer(amount);
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "../src/transformers/IERC20Transformer.sol";
import "./TestMintableERC20Token.sol";
import "./TestTransformerHost.sol";
import "./TestWeth.sol";


contract TestWethTransformerHost is
    TestTransformerHost
{
    // solhint-disable
    TestWeth private immutable _weth;
    // solhint-enable

    constructor(TestWeth weth) public {
        _weth = weth;
    }

    function executeTransform(
        uint256 wethAmount,
        IERC20Transformer transformer,
        bytes calldata data
    )
        external
        payable
    {
        if (wethAmount != 0) {
            _weth.deposit{value: wethAmount}();
        }
        // Have to make this call externally because transformers aren't payable.
        this.rawExecuteTransform(transformer, bytes32(0), msg.sender, data);
    }
}

/*

  Copyright 2020 ZeroEx Intl.

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

*/

pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;

import "../src/fixins/FixinCommon.sol";
import "../src/ZeroEx.sol";


contract TestZeroExFeature is
    FixinCommon
{
    event PayableFnCalled(uint256 value);
    event NotPayableFnCalled();

    function payableFn()
        external
        payable
    {
        emit PayableFnCalled(msg.value);
    }

    function notPayableFn()
        external
    {
        emit NotPayableFnCalled();
    }

    // solhint-disable no-empty-blocks
    function unimplmentedFn()
        external
    {}

    function internalFn()
        external
        onlySelf
    {}
}

{
  "remappings": [
    "@0x/contracts-utils=/home/cluracan/code/0x-monorepo/node_modules/@0x/contracts-utils",
    "@0x/contracts-erc20=/home/cluracan/code/0x-monorepo/node_modules/@0x/contracts-erc20"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 1000000,
    "details": {
      "yul": true,
      "deduplicate": true,
      "cse": true,
      "constantOptimizer": true
    }
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  },
  "evmVersion": "istanbul"
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"stateMutability":"payable","type":"fallback"},{"inputs":[{"internalType":"bytes4","name":"selector","type":"bytes4"}],"name":"getFunctionImplementation","outputs":[{"internalType":"address","name":"impl","type":"address"}],"stateMutability":"view","type":"function"},{"stateMutability":"payable","type":"receive"}]

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