Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

pragma solidity ^0.8.7;
// SPDX-License-Identifier: MIT

import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/math/SafeMath.sol";


contract GAT_Opensea is Ownable{
    uint256 public balance;
    uint256 public royaltyBalance;
    uint256 public gatBalance;
    address public royaltyAddress=0x02D7d23Ca050B0AeC73310DF298a179ACE9d0C7b;
    address public gatAddress=0x2171f1dA3083E848BABeB7F478B871d0384C00aA;
    uint256 public royaltyPercentage=50;
    uint256 public gatPercentage=50;


    function setRoyaltyAddress(address royalty_address) public onlyOwner {
        royaltyAddress = royalty_address;
    }

    
    function setGatAddress(address gat_address) public onlyOwner {
        gatAddress = gat_address;
    }

    function setRoyaltyPercentage(uint256 royalty_percentage) public onlyOwner {
        royaltyPercentage = royalty_percentage;
    }

    

    function setGatPercentage(uint256 gat_percentage) public onlyOwner {
        gatPercentage = gat_percentage;
    }



    event TransferReceived(address _from, uint _amount);
    event TransferSent(address _from, address _destAddr, uint _amount);
    
    
    
    receive() payable external {
        balance += msg.value;
        distriibuteEthPercentages(msg.value);
    
        emit TransferReceived(msg.sender, msg.value);
    }

    function distriibuteEthPercentages(uint256 valueAmount) internal {
        require(valueAmount > 0, "Invalid Amount sent");
        royaltyBalance += SafeMath.mul(SafeMath.div(valueAmount, 100), royaltyPercentage);        
        gatBalance += SafeMath.mul(SafeMath.div(valueAmount, 100), gatPercentage);
    }

    function resetBalances() internal {
        royaltyBalance = 0;
        gatBalance = 0;
        balance = address(this).balance;
    }
    
    function __withdrawToAllWalllets() public onlyOwner{
        
        Address.sendValue(payable(royaltyAddress), royaltyBalance);        
        Address.sendValue(payable(gatAddress), gatBalance);
        emit TransferSent(msg.sender, royaltyAddress, royaltyBalance);
        emit TransferSent(msg.sender, gatAddress, gatBalance);        
        resetBalances();
    }

    function withdrawToRoyalty() public onlyOwner{
        Address.sendValue(payable(royaltyAddress), royaltyBalance);        
        emit TransferSent(msg.sender, royaltyAddress, royaltyBalance);
        royaltyBalance = 0;        
    }

    function withdrawToGAT() public onlyOwner{
        Address.sendValue(payable(gatAddress), gatBalance);
        emit TransferSent(msg.sender, gatAddress, gatBalance);        
        gatBalance = 0;        
    }

    function withdrawFailProof(address _address) public onlyOwner{
        (bool os, ) = payable(_address).call{value: address(this).balance}("");
        require(os);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (utils/math/SafeMath.sol)

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

{
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"_from","type":"address"},{"indexed":false,"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"TransferReceived","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"_from","type":"address"},{"indexed":false,"internalType":"address","name":"_destAddr","type":"address"},{"indexed":false,"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"TransferSent","type":"event"},{"inputs":[],"name":"__withdrawToAllWalllets","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"balance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"gatAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"gatBalance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"gatPercentage","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"royaltyAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"royaltyBalance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"royaltyPercentage","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"gat_address","type":"address"}],"name":"setGatAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"gat_percentage","type":"uint256"}],"name":"setGatPercentage","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"royalty_address","type":"address"}],"name":"setRoyaltyAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"royalty_percentage","type":"uint256"}],"name":"setRoyaltyPercentage","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_address","type":"address"}],"name":"withdrawFailProof","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"withdrawToGAT","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"withdrawToRoyalty","outputs":[],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]

60806040527302d7d23ca050b0aec73310df298a179ace9d0c7b600460006101000a81548173ffffffffffffffffffffffffffffffffffffffff021916908373ffffffffffffffffffffffffffffffffffffffff160217905550732171f1da3083e848babeb7f478b871d0384c00aa600560006101000a81548173ffffffffffffffffffffffffffffffffffffffff021916908373ffffffffffffffffffffffffffffffffffffffff160217905550603260065560326007553480156100c457600080fd5b506100e16100d66100e660201b60201c565b6100ee60201b60201c565b6101b2565b600033905090565b60008060009054906101000a900473ffffffffffffffffffffffffffffffffffffffff169050816000806101000a81548173ffffffffffffffffffffffffffffffffffffffff021916908373ffffffffffffffffffffffffffffffffffffffff1602179055508173ffffffffffffffffffffffffffffffffffffffff168173ffffffffffffffffffffffffffffffffffffffff167f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e060405160405180910390a35050565b6111f0806101c16000396000f3fe60806040526004361061010c5760003560e01c8063947bc36d11610095578063b69ef8a811610064578063b69ef8a81461035e578063b90fd48014610389578063cb7d9a39146103b4578063cbcc4d4c146103cb578063f2fde38b146103f45761016e565b8063947bc36d146102dc5780639d1147f5146102f3578063ad2f852a1461031c578063b16634ad146103475761016e565b806361ba27da116100dc57806361ba27da1461021b578063698e517614610244578063715018a61461026f5780638a71bb2d146102865780638da5cb5b146102b15761016e565b80622e937f1461017357806306d254da1461019c57806313d6e79d146101c557806338174acb146101f05761016e565b3661016e5734600160008282546101239190610ef0565b925050819055506101333461041d565b7ff1b03f708b9c39f453fe3f0cef84164c7d6f7df836df0796e1e9c2bce6ee397e3334604051610164929190610df0565b60405180910390a1005b600080fd5b34801561017f57600080fd5b5061019a60048036038101906101959190610c6c565b6104bf565b005b3480156101a857600080fd5b506101c360048036038101906101be9190610c3f565b6104d1565b005b3480156101d157600080fd5b506101da61051d565b6040516101e79190610eb9565b60405180910390f35b3480156101fc57600080fd5b50610205610523565b6040516102129190610d9e565b60405180910390f35b34801561022757600080fd5b50610242600480360381019061023d9190610c6c565b610549565b005b34801561025057600080fd5b5061025961055b565b6040516102669190610eb9565b60405180910390f35b34801561027b57600080fd5b50610284610561565b005b34801561029257600080fd5b5061029b610575565b6040516102a89190610eb9565b60405180910390f35b3480156102bd57600080fd5b506102c661057b565b6040516102d39190610d9e565b60405180910390f35b3480156102e857600080fd5b506102f16105a4565b005b3480156102ff57600080fd5b5061031a60048036038101906103159190610c3f565b610643565b005b34801561032857600080fd5b506103316106c5565b60405161033e9190610d9e565b60405180910390f35b34801561035357600080fd5b5061035c6106eb565b005b34801561036a57600080fd5b5061037361078a565b6040516103809190610eb9565b60405180910390f35b34801561039557600080fd5b5061039e610790565b6040516103ab9190610eb9565b60405180910390f35b3480156103c057600080fd5b506103c9610796565b005b3480156103d757600080fd5b506103f260048036038101906103ed9190610c3f565b6108c2565b005b34801561040057600080fd5b5061041b60048036038101906104169190610c3f565b61090e565b005b60008111610460576040517f08c379a000000000000000000000000000000000000000000000000000000000815260040161045790610e99565b60405180910390fd5b61047661046e826064610992565b6006546109a8565b600260008282546104879190610ef0565b925050819055506104a461049c826064610992565b6007546109a8565b600360008282546104b59190610ef0565b9250508190555050565b6104c76109be565b8060078190555050565b6104d96109be565b80600460006101000a81548173ffffffffffffffffffffffffffffffffffffffff021916908373ffffffffffffffffffffffffffffffffffffffff16021790555050565b60035481565b600560009054906101000a900473ffffffffffffffffffffffffffffffffffffffff1681565b6105516109be565b8060068190555050565b60025481565b6105696109be565b6105736000610a3c565b565b60065481565b60008060009054906101000a900473ffffffffffffffffffffffffffffffffffffffff16905090565b6105ac6109be565b6105da600460009054906101000a900473ffffffffffffffffffffffffffffffffffffffff16600254610b00565b7ffda3a3e0e1479b43cb1c701f7576187f4c4ad80768d627387e00184302f7d88e33600460009054906101000a900473ffffffffffffffffffffffffffffffffffffffff1660025460405161063193929190610db9565b60405180910390a16000600281905550565b61064b6109be565b60008173ffffffffffffffffffffffffffffffffffffffff164760405161067190610d89565b60006040518083038185875af1925050503d80600081146106ae576040519150601f19603f3d011682016040523d82523d6000602084013e6106b3565b606091505b50509050806106c157600080fd5b5050565b600460009054906101000a900473ffffffffffffffffffffffffffffffffffffffff1681565b6106f36109be565b610721600560009054906101000a900473ffffffffffffffffffffffffffffffffffffffff16600354610b00565b7ffda3a3e0e1479b43cb1c701f7576187f4c4ad80768d627387e00184302f7d88e33600560009054906101000a900473ffffffffffffffffffffffffffffffffffffffff1660035460405161077893929190610db9565b60405180910390a16000600381905550565b60015481565b60075481565b61079e6109be565b6107cc600460009054906101000a900473ffffffffffffffffffffffffffffffffffffffff16600254610b00565b6107fa600560009054906101000a900473ffffffffffffffffffffffffffffffffffffffff16600354610b00565b7ffda3a3e0e1479b43cb1c701f7576187f4c4ad80768d627387e00184302f7d88e33600460009054906101000a900473ffffffffffffffffffffffffffffffffffffffff1660025460405161085193929190610db9565b60405180910390a17ffda3a3e0e1479b43cb1c701f7576187f4c4ad80768d627387e00184302f7d88e33600560009054906101000a900473ffffffffffffffffffffffffffffffffffffffff166003546040516108b093929190610db9565b60405180910390a16108c0610bf4565b565b6108ca6109be565b80600560006101000a81548173ffffffffffffffffffffffffffffffffffffffff021916908373ffffffffffffffffffffffffffffffffffffffff16021790555050565b6109166109be565b600073ffffffffffffffffffffffffffffffffffffffff168173ffffffffffffffffffffffffffffffffffffffff161415610986576040517f08c379a000000000000000000000000000000000000000000000000000000000815260040161097d90610e19565b60405180910390fd5b61098f81610a3c565b50565b600081836109a09190610f46565b905092915050565b600081836109b69190610f77565b905092915050565b6109c6610c0d565b73ffffffffffffffffffffffffffffffffffffffff166109e461057b565b73ffffffffffffffffffffffffffffffffffffffff1614610a3a576040517f08c379a0000000000000000000000000000000000000000000000000000000008152600401610a3190610e79565b60405180910390fd5b565b60008060009054906101000a900473ffffffffffffffffffffffffffffffffffffffff169050816000806101000a81548173ffffffffffffffffffffffffffffffffffffffff021916908373ffffffffffffffffffffffffffffffffffffffff1602179055508173ffffffffffffffffffffffffffffffffffffffff168173ffffffffffffffffffffffffffffffffffffffff167f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e060405160405180910390a35050565b80471015610b43576040517f08c379a0000000000000000000000000000000000000000000000000000000008152600401610b3a90610e59565b60405180910390fd5b60008273ffffffffffffffffffffffffffffffffffffffff1682604051610b6990610d89565b60006040518083038185875af1925050503d8060008114610ba6576040519150601f19603f3d011682016040523d82523d6000602084013e610bab565b606091505b5050905080610bef576040517f08c379a0000000000000000000000000000000000000000000000000000000008152600401610be690610e39565b60405180910390fd5b505050565b6000600281905550600060038190555047600181905550565b600033905090565b600081359050610c248161118c565b92915050565b600081359050610c39816111a3565b92915050565b600060208284031215610c5557610c5461106b565b5b6000610c6384828501610c15565b91505092915050565b600060208284031215610c8257610c8161106b565b5b6000610c9084828501610c2a565b91505092915050565b610ca281610fd1565b82525050565b6000610cb5602683610edf565b9150610cc082611070565b604082019050919050565b6000610cd8603a83610edf565b9150610ce3826110bf565b604082019050919050565b6000610cfb601d83610edf565b9150610d068261110e565b602082019050919050565b6000610d1e602083610edf565b9150610d2982611137565b602082019050919050565b6000610d41600083610ed4565b9150610d4c82611160565b600082019050919050565b6000610d64601383610edf565b9150610d6f82611163565b602082019050919050565b610d8381611003565b82525050565b6000610d9482610d34565b9150819050919050565b6000602082019050610db36000830184610c99565b92915050565b6000606082019050610dce6000830186610c99565b610ddb6020830185610c99565b610de86040830184610d7a565b949350505050565b6000604082019050610e056000830185610c99565b610e126020830184610d7a565b9392505050565b60006020820190508181036000830152610e3281610ca8565b9050919050565b60006020820190508181036000830152610e5281610ccb565b9050919050565b60006020820190508181036000830152610e7281610cee565b9050919050565b60006020820190508181036000830152610e9281610d11565b9050919050565b60006020820190508181036000830152610eb281610d57565b9050919050565b6000602082019050610ece6000830184610d7a565b92915050565b600081905092915050565b600082825260208201905092915050565b6000610efb82611003565b9150610f0683611003565b9250827fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff03821115610f3b57610f3a61100d565b5b828201905092915050565b6000610f5182611003565b9150610f5c83611003565b925082610f6c57610f6b61103c565b5b828204905092915050565b6000610f8282611003565b9150610f8d83611003565b9250817fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff0483118215151615610fc657610fc561100d565b5b828202905092915050565b6000610fdc82610fe3565b9050919050565b600073ffffffffffffffffffffffffffffffffffffffff82169050919050565b6000819050919050565b7f4e487b7100000000000000000000000000000000000000000000000000000000600052601160045260246000fd5b7f4e487b7100000000000000000000000000000000000000000000000000000000600052601260045260246000fd5b600080fd5b7f4f776e61626c653a206e6577206f776e657220697320746865207a65726f206160008201527f6464726573730000000000000000000000000000000000000000000000000000602082015250565b7f416464726573733a20756e61626c6520746f2073656e642076616c75652c207260008201527f6563697069656e74206d61792068617665207265766572746564000000000000602082015250565b7f416464726573733a20696e73756666696369656e742062616c616e6365000000600082015250565b7f4f776e61626c653a2063616c6c6572206973206e6f7420746865206f776e6572600082015250565b50565b7f496e76616c696420416d6f756e742073656e7400000000000000000000000000600082015250565b61119581610fd1565b81146111a057600080fd5b50565b6111ac81611003565b81146111b757600080fd5b5056fea2646970667358221220ce6f13fed46fad092a0755542375eceada77fcd4bbe6142d367d88da8cce4e1364736f6c63430008070033

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