Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;

import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";

import {BaseExchangeModule} from "./BaseExchangeModule.sol";
import {BaseModule} from "../BaseModule.sol";

import {IWETH} from "../../../interfaces/IWETH.sol";

// Notes:
// - supports swapping ETH and ERC20 to any token via a direct path

contract OneInchSwapModule is BaseExchangeModule {
  struct TransferDetail {
    address recipient;
    uint256 amount;
    bool toETH;
  }

  struct SwapDetail {
    IERC20 tokenIn;
    IERC20 tokenOut;
    uint256 amountOut;
    uint256 amountInMaximum;
    bytes data;
  }

  struct Swap {
    SwapDetail params;
    TransferDetail[] transfers;
  }

  // --- Fields ---

  IWETH public immutable WETH;
  address public immutable AGGREGATION_ROUTER;

  // --- Constructor ---

  constructor(
    address owner,
    address router,
    address weth,
    address aggregationRouter
  ) BaseModule(owner) BaseExchangeModule(router) {
    WETH = IWETH(weth);
    AGGREGATION_ROUTER = aggregationRouter;
  }

  // --- Fallback ---

  receive() external payable {}

  // --- Wrap ---

  function wrap(TransferDetail[] calldata targets) external payable nonReentrant {
    WETH.deposit{value: msg.value}();

    uint256 length = targets.length;
    for (uint256 i = 0; i < length; ) {
      _sendERC20(targets[i].recipient, targets[i].amount, WETH);

      unchecked {
        ++i;
      }
    }
  }

  // --- Unwrap ---

  function unwrap(TransferDetail[] calldata targets) external nonReentrant {
    uint256 balance = WETH.balanceOf(address(this));
    WETH.withdraw(balance);

    uint256 length = targets.length;
    for (uint256 i = 0; i < length; ) {
      _sendETH(targets[i].recipient, targets[i].amount);

      unchecked {
        ++i;
      }
    }
  }

  // --- Swaps ---

  function ethToExactOutput(
    // Assumes all swaps have the same token in
    Swap[] calldata swaps,
    address refundTo,
    bool revertIfIncomplete
  ) external payable nonReentrant refundETHLeftover(refundTo) {
    uint256 swapsLength = swaps.length;
    for (uint256 i; i < swapsLength; ) {
      Swap calldata swap = swaps[i];

      // Execute the swap
      (bool success, ) = AGGREGATION_ROUTER.call{value: swap.params.amountInMaximum}(
        swap.params.data
      );
      if (success) {
        uint256 length = swap.transfers.length;
        for (uint256 j = 0; j < length; ) {
          TransferDetail calldata transferDetail = swap.transfers[j];
          if (transferDetail.toETH) {
            WETH.withdraw(transferDetail.amount);
            _sendETH(transferDetail.recipient, transferDetail.amount);
          } else {
            _sendERC20(
              transferDetail.recipient,
              transferDetail.amount,
              IERC20(swap.params.tokenOut)
            );
          }

          unchecked {
            ++j;
          }
        }
      } else {
        if (revertIfIncomplete) {
          revert UnsuccessfulFill();
        }
      }

      unchecked {
        ++i;
      }
    }
  }

  function erc20ToExactOutput(
    // Assumes all swaps have the same token in
    Swap[] calldata swaps,
    address refundTo,
    bool revertIfIncomplete
  ) external nonReentrant refundERC20Leftover(refundTo, swaps[0].params.tokenIn) {
    uint256 swapsLength = swaps.length;
    for (uint256 i; i < swapsLength; ) {
      Swap calldata swap = swaps[i];

      // Approve the router if needed
      _approveERC20IfNeeded(swap.params.tokenIn, AGGREGATION_ROUTER, swap.params.amountInMaximum);

      // Execute the swap
      (bool success, ) = AGGREGATION_ROUTER.call(swap.params.data);
      if (success) {
        uint256 transfersLength = swap.transfers.length;
        for (uint256 j = 0; j < transfersLength; ) {
          TransferDetail calldata transferDetail = swap.transfers[j];
          if (transferDetail.toETH) {
            WETH.withdraw(transferDetail.amount);
            _sendETH(transferDetail.recipient, transferDetail.amount);
          } else {
            _sendERC20(
              transferDetail.recipient,
              transferDetail.amount,
              IERC20(swap.params.tokenOut)
            );
          }

          unchecked {
            ++j;
          }
        }
      } else {
        if (revertIfIncomplete) {
          revert UnsuccessfulFill();
        }
      }

      unchecked {
        ++i;
      }
    }
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be _NOT_ENTERED
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == _ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC1155/IERC1155.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC1155 compliant contract, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1155[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155 is IERC165 {
    /**
     * @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
     */
    event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);

    /**
     * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
     * transfers.
     */
    event TransferBatch(
        address indexed operator,
        address indexed from,
        address indexed to,
        uint256[] ids,
        uint256[] values
    );

    /**
     * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
     * `approved`.
     */
    event ApprovalForAll(address indexed account, address indexed operator, bool approved);

    /**
     * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
     *
     * If an {URI} event was emitted for `id`, the standard
     * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
     * returned by {IERC1155MetadataURI-uri}.
     */
    event URI(string value, uint256 indexed id);

    /**
     * @dev Returns the amount of tokens of token type `id` owned by `account`.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) external view returns (uint256);

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(
        address[] calldata accounts,
        uint256[] calldata ids
    ) external view returns (uint256[] memory);

    /**
     * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
     *
     * Emits an {ApprovalForAll} event.
     *
     * Requirements:
     *
     * - `operator` cannot be the caller.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address account, address operator) external view returns (bool);

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If the caller is not `from`, it must have been approved to spend ``from``'s tokens via {setApprovalForAll}.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function safeTransferFrom(address from, address to, uint256 id, uint256 amount, bytes calldata data) external;

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] calldata ids,
        uint256[] calldata amounts,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
     * Revert on invalid signature.
     */
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return
            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC721/IERC721.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
     * understand this adds an external call which potentially creates a reentrancy vulnerability.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;

import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";

interface IWETH is IERC20 {
  function deposit() external payable;

  function withdraw(uint256 amount) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;

// Adapted from:
// https://github.com/boringcrypto/BoringSolidity/blob/e74c5b22a61bfbadd645e51a64aa1d33734d577a/contracts/BoringOwnable.sol
contract TwoStepOwnable {
  // --- Fields ---

  address public owner;
  address public pendingOwner;

  // --- Events ---

  event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

  // --- Errors ---

  error InvalidParams();
  error Unauthorized();

  // --- Modifiers ---

  modifier onlyOwner() {
    if (msg.sender != owner) {
      revert Unauthorized();
    }

    _;
  }

  // --- Constructor ---

  constructor(address initialOwner) {
    owner = initialOwner;
    emit OwnershipTransferred(address(0), initialOwner);
  }

  // --- Methods ---

  function transferOwnership(address newOwner) public onlyOwner {
    pendingOwner = newOwner;
  }

  function claimOwnership() public {
    address _pendingOwner = pendingOwner;
    if (msg.sender != _pendingOwner) {
      revert Unauthorized();
    }

    owner = _pendingOwner;
    pendingOwner = address(0);
    emit OwnershipTransferred(owner, _pendingOwner);
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;

import {ReentrancyGuard} from "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

import {TwoStepOwnable} from "../../misc/TwoStepOwnable.sol";

// Notes:
// - includes common helpers useful for all modules

abstract contract BaseModule is TwoStepOwnable, ReentrancyGuard {
  using SafeERC20 for IERC20;

  // --- Events ---

  event CallExecuted(address target, bytes data, uint256 value);

  // --- Errors ---

  error UnsuccessfulCall();
  error UnsuccessfulPayment();
  error WrongParams();

  // --- Constructor ---

  constructor(address owner) TwoStepOwnable(owner) {}

  // --- Owner ---

  // To be able to recover anything that gets stucked by mistake in the module,
  // we allow the owner to perform any arbitrary call. Since the goal is to be
  // stateless, this should only happen in case of mistakes. In addition, this
  // method is also useful for withdrawing any earned trading rewards.
  function makeCalls(
    address[] calldata targets,
    bytes[] calldata data,
    uint256[] calldata values
  ) external payable onlyOwner nonReentrant {
    uint256 length = targets.length;
    for (uint256 i = 0; i < length; ) {
      _makeCall(targets[i], data[i], values[i]);
      emit CallExecuted(targets[i], data[i], values[i]);

      unchecked {
        ++i;
      }
    }
  }

  // --- Helpers ---

  function _sendETH(address to, uint256 amount) internal {
    if (amount > 0) {
      (bool success, ) = payable(to).call{value: amount}("");
      if (!success) {
        revert UnsuccessfulPayment();
      }
    }
  }

  function _sendERC20(
    address to,
    uint256 amount,
    IERC20 token
  ) internal {
    if (amount > 0) {
      token.safeTransfer(to, amount);
    }
  }

  function _makeCall(
    address target,
    bytes memory data,
    uint256 value
  ) internal {
    (bool success, ) = payable(target).call{value: value}(data);
    if (!success) {
      revert UnsuccessfulCall();
    }
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;

import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {IERC721} from "@openzeppelin/contracts/token/ERC721/IERC721.sol";
import {IERC1155} from "@openzeppelin/contracts/token/ERC1155/IERC1155.sol";

import {BaseModule} from "../BaseModule.sol";

// Notes:
// - includes common helpers useful for all marketplace/exchange modules

abstract contract BaseExchangeModule is BaseModule {
  using SafeERC20 for IERC20;

  // --- Structs ---

  // Every fill execution has the following parameters:
  // - `fillTo`: the recipient of the received items
  // - `refundTo`: the recipient of any refunds
  // - `revertIfIncomplete`: whether to revert or skip unsuccessful fills

  // The below `ETHListingParams` and `ERC20ListingParams` rely on the
  // off-chain execution encoder to ensure that the orders filled with
  // the passed in listing parameters exactly match (eg. order amounts
  // and payment tokens match).

  struct ETHListingParams {
    address fillTo;
    address refundTo;
    bool revertIfIncomplete;
    // The total amount of ETH to be provided when filling
    uint256 amount;
  }

  struct ERC20ListingParams {
    address fillTo;
    address refundTo;
    bool revertIfIncomplete;
    // The ERC20 payment token for the listings
    IERC20 token;
    // The total amount of `token` to be provided when filling
    uint256 amount;
  }

  struct OfferParams {
    address fillTo;
    address refundTo;
    bool revertIfIncomplete;
  }

  struct Fee {
    address recipient;
    uint256 amount;
  }

  // --- Fields ---

  address public immutable router;

  // --- Errors ---

  error UnsuccessfulFill();

  // --- Constructor ---

  constructor(address routerAddress) {
    router = routerAddress;
  }

  // --- Modifiers ---

  modifier refundETHLeftover(address refundTo) {
    _;

    uint256 leftover = address(this).balance;
    if (leftover > 0) {
      _sendETH(refundTo, leftover);
    }
  }

  modifier refundERC20Leftover(address refundTo, IERC20 token) {
    _;

    uint256 leftover = token.balanceOf(address(this));
    if (leftover > 0) {
      token.safeTransfer(refundTo, leftover);
    }
  }

  modifier chargeETHFees(Fee[] calldata fees, uint256 amount) {
    if (fees.length == 0) {
      _;
    } else {
      uint256 balanceBefore = address(this).balance;

      _;

      uint256 length = fees.length;
      if (length > 0) {
        uint256 balanceAfter = address(this).balance;
        uint256 actualPaid = balanceBefore - balanceAfter;

        uint256 actualFee;
        for (uint256 i = 0; i < length; ) {
          // Adjust the fee to what was actually paid
          actualFee = (fees[i].amount * actualPaid) / amount;
          if (actualFee > 0) {
            _sendETH(fees[i].recipient, actualFee);
          }

          unchecked {
            ++i;
          }
        }
      }
    }
  }

  modifier chargeERC20Fees(
    Fee[] calldata fees,
    IERC20 token,
    uint256 amount
  ) {
    if (fees.length == 0) {
      _;
    } else {
      uint256 balanceBefore = token.balanceOf(address(this));

      _;

      uint256 length = fees.length;
      if (length > 0) {
        uint256 balanceAfter = token.balanceOf(address(this));
        uint256 actualPaid = balanceBefore - balanceAfter;

        uint256 actualFee;
        for (uint256 i = 0; i < length; ) {
          // Adjust the fee to what was actually paid
          actualFee = (fees[i].amount * actualPaid) / amount;
          if (actualFee > 0) {
            token.safeTransfer(fees[i].recipient, actualFee);
          }

          unchecked {
            ++i;
          }
        }
      }
    }
  }

  // --- Helpers ---

  function _sendAllETH(address to) internal {
    _sendETH(to, address(this).balance);
  }

  function _sendAllERC20(address to, IERC20 token) internal {
    uint256 balance = token.balanceOf(address(this));
    if (balance > 0) {
      token.safeTransfer(to, balance);
    }
  }

  function _sendAllERC721(address to, IERC721 token, uint256 tokenId) internal {
    if (token.ownerOf(tokenId) == address(this)) {
      token.safeTransferFrom(address(this), to, tokenId);
    }
  }

  function _sendAllERC1155(address to, IERC1155 token, uint256 tokenId) internal {
    uint256 balance = token.balanceOf(address(this), tokenId);
    if (balance > 0) {
      token.safeTransferFrom(address(this), to, tokenId, balance, "");
    }
  }

  function _approveERC20IfNeeded(IERC20 token, address spender, uint256 amount) internal {
    uint256 allowance = token.allowance(address(this), spender);
    if (allowance < amount) {
      token.approve(spender, amount);
    }
  }

  function _approveERC721IfNeeded(IERC721 token, address operator) internal {
    bool isApproved = token.isApprovedForAll(address(this), operator);
    if (!isApproved) {
      token.setApprovalForAll(operator, true);
    }
  }

  function _approveERC1155IfNeeded(IERC1155 token, address operator) internal {
    bool isApproved = token.isApprovedForAll(address(this), operator);
    if (!isApproved) {
      token.setApprovalForAll(operator, true);
    }
  }
}

{
  "viaIR": true,
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"router","type":"address"},{"internalType":"address","name":"weth","type":"address"},{"internalType":"address","name":"aggregationRouter","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"InvalidParams","type":"error"},{"inputs":[],"name":"Unauthorized","type":"error"},{"inputs":[],"name":"UnsuccessfulCall","type":"error"},{"inputs":[],"name":"UnsuccessfulFill","type":"error"},{"inputs":[],"name":"UnsuccessfulPayment","type":"error"},{"inputs":[],"name":"WrongParams","type":"error"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"target","type":"address"},{"indexed":false,"internalType":"bytes","name":"data","type":"bytes"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"CallExecuted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"inputs":[],"name":"AGGREGATION_ROUTER","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"WETH","outputs":[{"internalType":"contract IWETH","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"claimOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"components":[{"internalType":"contract IERC20","name":"tokenIn","type":"address"},{"internalType":"contract IERC20","name":"tokenOut","type":"address"},{"internalType":"uint256","name":"amountOut","type":"uint256"},{"internalType":"uint256","name":"amountInMaximum","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"internalType":"struct OneInchSwapModule.SwapDetail","name":"params","type":"tuple"},{"components":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"bool","name":"toETH","type":"bool"}],"internalType":"struct OneInchSwapModule.TransferDetail[]","name":"transfers","type":"tuple[]"}],"internalType":"struct OneInchSwapModule.Swap[]","name":"swaps","type":"tuple[]"},{"internalType":"address","name":"refundTo","type":"address"},{"internalType":"bool","name":"revertIfIncomplete","type":"bool"}],"name":"erc20ToExactOutput","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"components":[{"internalType":"contract IERC20","name":"tokenIn","type":"address"},{"internalType":"contract IERC20","name":"tokenOut","type":"address"},{"internalType":"uint256","name":"amountOut","type":"uint256"},{"internalType":"uint256","name":"amountInMaximum","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"internalType":"struct OneInchSwapModule.SwapDetail","name":"params","type":"tuple"},{"components":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"bool","name":"toETH","type":"bool"}],"internalType":"struct OneInchSwapModule.TransferDetail[]","name":"transfers","type":"tuple[]"}],"internalType":"struct OneInchSwapModule.Swap[]","name":"swaps","type":"tuple[]"},{"internalType":"address","name":"refundTo","type":"address"},{"internalType":"bool","name":"revertIfIncomplete","type":"bool"}],"name":"ethToExactOutput","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address[]","name":"targets","type":"address[]"},{"internalType":"bytes[]","name":"data","type":"bytes[]"},{"internalType":"uint256[]","name":"values","type":"uint256[]"}],"name":"makeCalls","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pendingOwner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"router","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"bool","name":"toETH","type":"bool"}],"internalType":"struct OneInchSwapModule.TransferDetail[]","name":"targets","type":"tuple[]"}],"name":"unwrap","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"bool","name":"toETH","type":"bool"}],"internalType":"struct OneInchSwapModule.TransferDetail[]","name":"targets","type":"tuple[]"}],"name":"wrap","outputs":[],"stateMutability":"payable","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

000000000000000000000000f3d63166f0ca56c3c1a3508fce03ff0cf3fb691e000000000000000000000000c2c862322e9c97d6244a3506655da95f05246fd8000000000000000000000000c02aaa39b223fe8d0a0e5c4f27ead9083c756cc20000000000000000000000001111111254eeb25477b68fb85ed929f73a960582

-----Decoded View---------------
Arg [0] : owner (address): 0xf3d63166F0Ca56C3c1A3508FcE03Ff0Cf3Fb691e
Arg [1] : router (address): 0xC2c862322E9c97D6244a3506655DA95F05246Fd8
Arg [2] : weth (address): 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2
Arg [3] : aggregationRouter (address): 0x1111111254EEB25477B68fb85Ed929f73A960582

-----Encoded View---------------
4 Constructor Arguments found :
Arg [0] : 000000000000000000000000f3d63166f0ca56c3c1a3508fce03ff0cf3fb691e
Arg [1] : 000000000000000000000000c2c862322e9c97d6244a3506655da95f05246fd8
Arg [2] : 000000000000000000000000c02aaa39b223fe8d0a0e5c4f27ead9083c756cc2
Arg [3] : 0000000000000000000000001111111254eeb25477b68fb85ed929f73a960582