Contract Source Code (Solidity)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

Outline

• library Address
•    - function isContract(address account)
•    - function sendValue(address payable re ...
•    - function functionCall(address target, ...
•    - function functionCall(
•    - function functionCallWithValue(
•    - function functionCallWithValue(
•    - function functionStaticCall(address t ...
•    - function functionStaticCall(
•    - function functionDelegateCall(address ...
•    - function functionDelegateCall(
•    - function verifyCallResultFromTarget(
•    - function verifyCallResult(
•    - function _revert(bytes memory returnd ...
• interface IERC20PermitUpgradeable
•    - function permit(
•    - function nonces(address owner)
•    - function DOMAIN_SEPARATOR()
• interface IERC20Upgradeable
•    - function totalSupply()
•    - function balanceOf(address account)
•    - function transfer(address to, uint256 ...
•    - function allowance(address owner, add ...
•    - function approve(address spender, uin ...
•    - function transferFrom(
• library AddressUpgradeable
•    - function isContract(address account)
•    - function sendValue(address payable re ...
•    - function functionCall(address target, ...
•    - function functionCall(
•    - function functionCallWithValue(
•    - function functionCallWithValue(
•    - function functionStaticCall(address t ...
•    - function functionStaticCall(
•    - function verifyCallResultFromTarget(
•    - function verifyCallResult(
•    - function _revert(bytes memory returnd ...
• library SafeERC20Upgradeable
•    - function safeTransfer(
•    - function safeTransferFrom(
•    - function safeApprove(
•    - function safeIncreaseAllowance(
•    - function safeDecreaseAllowance(
•    - function safePermit(
•    - function _callOptionalReturn(IERC20Up ...
•    - function _disableInitializers()
•    - function _getInitializedVersion()
•    - function _isInitializing()
•    - function __ReentrancyGuard_init()
•    - function __ReentrancyGuard_init_uncha ...
•    - function _nonReentrantBefore()
•    - function _nonReentrantAfter()
•    - function __Context_init()
•    - function __Context_init_unchained()
•    - function _msgSender()
•    - function _msgData()
•    - function __Pausable_init()
•    - function __Pausable_init_unchained()
•    - function paused()
•    - function _requireNotPaused()
•    - function _requirePaused()
•    - function _pause()
•    - function _unpause()
•    - function __Ownable_init()
•    - function __Ownable_init_unchained()
•    - function owner()
•    - function _checkOwner()
•    - function renounceOwnership()
•    - function transferOwnership(address ne ...
•    - function _transferOwnership(address n ...
•  contract RSPresale is Initializabl ... *
•    - function whitelistRecipient(address r ...
•    - function buyWithETHWert(
•    - function whitelistUsersForWERT(
•    - function removeFromWhitelistForWERT(

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

/**
 *Submitted for verification at Etherscan.io on 2023-11-01
*/

//SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}


/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20PermitUpgradeable {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}





/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20Upgradeable {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}



/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}






/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20Upgradeable {
    using AddressUpgradeable for address;

    function safeTransfer(
        IERC20Upgradeable token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20Upgradeable token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20Upgradeable token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20Upgradeable token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20Upgradeable token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    function safePermit(
        IERC20PermitUpgradeable token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20Upgradeable token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}



/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a
     * constructor.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: setting the version to 255 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized < type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }

    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint8) {
        return _initialized;
    }

    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _initializing;
    }
}




/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuardUpgradeable is Initializable {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    function __ReentrancyGuard_init() internal onlyInitializing {
        __ReentrancyGuard_init_unchained();
    }

    function __ReentrancyGuard_init_unchained() internal onlyInitializing {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be _NOT_ENTERED
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}




/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }

    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}





/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract PausableUpgradeable is Initializable, ContextUpgradeable {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */
    function __Pausable_init() internal onlyInitializing {
        __Pausable_init_unchained();
    }

    function __Pausable_init_unchained() internal onlyInitializing {
        _paused = false;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        _requireNotPaused();
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        _requirePaused();
        _;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Throws if the contract is paused.
     */
    function _requireNotPaused() internal view virtual {
        require(!paused(), "Pausable: paused");
    }

    /**
     * @dev Throws if the contract is not paused.
     */
    function _requirePaused() internal view virtual {
        require(paused(), "Pausable: not paused");
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}





/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    function __Ownable_init() internal onlyInitializing {
        __Ownable_init_unchained();
    }

    function __Ownable_init_unchained() internal onlyInitializing {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}





contract RSPresale is Initializable, ReentrancyGuardUpgradeable, OwnableUpgradeable, PausableUpgradeable {
        address public recipientWalletAddress; // state variable for the recipient's address

    using SafeERC20Upgradeable for IERC20Upgradeable;
    mapping(address => bool) public wertWhitelistedWallets;
    mapping(address => bool) public whitelistRecipients;
    event WhitelistAdded(address indexed wallet);
    event WhitelistRemoved(address indexed wallet);


    constructor() initializer {
        __Ownable_init();
    }
  
  function whitelistRecipient(address recipient) external onlyOwner {
        recipientWalletAddress = recipient;
        whitelistRecipients[recipient] = true;
        emit WhitelistAdded(recipient);
    }

    function buyWithETHWert(
        uint256 _amount
    )
        external
        payable
        whenNotPaused
        nonReentrant
        returns (bool)
    {
       
        require(msg.value >= _amount, "Less payment");
        require(whitelistRecipients[recipientWalletAddress], "Recipient address not whitelisted");
        Address.sendValue(payable(recipientWalletAddress), _amount);    
        return true;
    }
    

    function whitelistUsersForWERT(
        address[] calldata _addressesToWhitelist
    ) external onlyOwner {
        for (uint256 i = 0; i < _addressesToWhitelist.length; i++) {
            wertWhitelistedWallets[_addressesToWhitelist[i]] = true;
        }
        
    }

    function removeFromWhitelistForWERT(
        address[] calldata _addressesToRemoveFromWhitelist
    ) external onlyOwner {
        for (uint256 i = 0; i < _addressesToRemoveFromWhitelist.length; i++) {
            wertWhitelistedWallets[_addressesToRemoveFromWhitelist[i]] = false;
        }
    }

    
    receive() external payable {
        // React to receiving ether
    }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint8","name":"version","type":"uint8"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Paused","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Unpaused","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"wallet","type":"address"}],"name":"WhitelistAdded","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"wallet","type":"address"}],"name":"WhitelistRemoved","type":"event"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"buyWithETHWert","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"paused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"recipientWalletAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address[]","name":"_addressesToRemoveFromWhitelist","type":"address[]"}],"name":"removeFromWhitelistForWERT","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"wertWhitelistedWallets","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"}],"name":"whitelistRecipient","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"whitelistRecipients","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address[]","name":"_addressesToWhitelist","type":"address[]"}],"name":"whitelistUsersForWERT","outputs":[],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

0x6080604052600436106100a05760003560e01c8063aa64329f11610064578063aa64329f14610151578063cb1711b014610171578063f2fde38b146101a1578063f4463743146101c1578063f78fe978146101e1578063feba4c0e1461020157600080fd5b806303b9c5ad146100ac5780635c975abb146100ce5780636a345656146100f7578063715018a61461010a5780638da5cb5b1461011f57600080fd5b366100a757005b600080fd5b3480156100b857600080fd5b506100cc6100c7366004610784565b610231565b005b3480156100da57600080fd5b5060975460ff165b60405190151581526020015b60405180910390f35b6100e26101053660046107f9565b6102b0565b34801561011657600080fd5b506100cc6103a1565b34801561012b57600080fd5b506065546001600160a01b03165b6040516001600160a01b0390911681526020016100ee565b34801561015d57600080fd5b5060c954610139906001600160a01b031681565b34801561017d57600080fd5b506100e261018c366004610812565b60cb6020526000908152604090205460ff1681565b3480156101ad57600080fd5b506100cc6101bc366004610812565b6103b5565b3480156101cd57600080fd5b506100cc6101dc366004610784565b61042e565b3480156101ed57600080fd5b506100cc6101fc366004610812565b6104a8565b34801561020d57600080fd5b506100e261021c366004610812565b60ca6020526000908152604090205460ff1681565b61023961051f565b60005b818110156102ab57600160ca600085858581811061025c5761025c610842565b90506020020160208101906102719190610812565b6001600160a01b031681526020810191909152604001600020805460ff1916911515919091179055806102a381610858565b91505061023c565b505050565b60006102ba610579565b6102c26105bf565b813410156103065760405162461bcd60e51b815260206004820152600c60248201526b13195cdcc81c185e5b595b9d60a21b60448201526064015b60405180910390fd5b60c9546001600160a01b0316600090815260cb602052604090205460ff1661037a5760405162461bcd60e51b815260206004820152602160248201527f526563697069656e742061646472657373206e6f742077686974656c697374656044820152601960fa1b60648201526084016102fd565b60c954610390906001600160a01b031683610619565b50600161039c60018055565b919050565b6103a961051f565b6103b36000610732565b565b6103bd61051f565b6001600160a01b0381166104225760405162461bcd60e51b815260206004820152602660248201527f4f776e61626c653a206e6577206f776e657220697320746865207a65726f206160448201526564647265737360d01b60648201526084016102fd565b61042b81610732565b50565b61043661051f565b60005b818110156102ab57600060ca600085858581811061045957610459610842565b905060200201602081019061046e9190610812565b6001600160a01b031681526020810191909152604001600020805460ff1916911515919091179055806104a081610858565b915050610439565b6104b061051f565b60c980546001600160a01b0319166001600160a01b038316908117909155600081815260cb6020526040808220805460ff19166001179055517f4790a4adb426ca2345bb5108f6e454eae852a7bf687544cd66a7270dff3a41d69190a250565b6001600160a01b03163b151590565b6065546001600160a01b031633146103b35760405162461bcd60e51b815260206004820181905260248201527f4f776e61626c653a2063616c6c6572206973206e6f7420746865206f776e657260448201526064016102fd565b60975460ff16156103b35760405162461bcd60e51b815260206004820152601060248201526f14185d5cd8589b194e881c185d5cd95960821b60448201526064016102fd565b600260015414156106125760405162461bcd60e51b815260206004820152601f60248201527f5265656e7472616e637947756172643a207265656e7472616e742063616c6c0060448201526064016102fd565b6002600155565b804710156106695760405162461bcd60e51b815260206004820152601d60248201527f416464726573733a20696e73756666696369656e742062616c616e636500000060448201526064016102fd565b6000826001600160a01b03168260405160006040518083038185875af1925050503d80600081146106b6576040519150601f19603f3d011682016040523d82523d6000602084013e6106bb565b606091505b50509050806102ab5760405162461bcd60e51b815260206004820152603a60248201527f416464726573733a20756e61626c6520746f2073656e642076616c75652c207260448201527f6563697069656e74206d6179206861766520726576657274656400000000000060648201526084016102fd565b606580546001600160a01b038381166001600160a01b0319831681179093556040519116919082907f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e090600090a35050565b6000806020838503121561079757600080fd5b823567ffffffffffffffff808211156107af57600080fd5b818501915085601f8301126107c357600080fd5b8135818111156107d257600080fd5b8660208260051b85010111156107e757600080fd5b60209290920196919550909350505050565b60006020828403121561080b57600080fd5b5035919050565b60006020828403121561082457600080fd5b81356001600160a01b038116811461083b57600080fd5b9392505050565b634e487b7160e01b600052603260045260246000fd5b600060001982141561087a57634e487b7160e01b600052601160045260246000fd5b506001019056fea26469706673582212200e983ed669667852c61217da53507bb87b4c26bace2d0748a1030f81c1dfaa3264736f6c63430008090033

44205:1901:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;45429:277;;;;;;;;;;-1:-1:-1;45429:277:0;;;;;:::i;:::-;;:::i;:::-;;39879:86;;;;;;;;;;-1:-1:-1;39950:7:0;;;;39879:86;;;799:14:1;;792:22;774:41;;762:2;747:18;39879:86:0;;;;;;;;44980:435;;;;;;:::i;:::-;;:::i;43082:103::-;;;;;;;;;;;;;:::i;42434:87::-;;;;;;;;;;-1:-1:-1;42507:6:0;;-1:-1:-1;;;;;42507:6:0;42434:87;;;-1:-1:-1;;;;;1175:32:1;;;1157:51;;1145:2;1130:18;42434:87:0;1011:203:1;44321:37:0;;;;;;;;;;-1:-1:-1;44321:37:0;;;;-1:-1:-1;;;;;44321:37:0;;;44529:51;;;;;;;;;;-1:-1:-1;44529:51:0;;;;;:::i;:::-;;;;;;;;;;;;;;;;43340:201;;;;;;;;;;-1:-1:-1;43340:201:0;;;;;:::i;:::-;;:::i;45714:303::-;;;;;;;;;;-1:-1:-1;45714:303:0;;;;;:::i;:::-;;:::i;44764:208::-;;;;;;;;;;-1:-1:-1;44764:208:0;;;;;:::i;:::-;;:::i;44468:54::-;;;;;;;;;;-1:-1:-1;44468:54:0;;;;;:::i;:::-;;;;;;;;;;;;;;;;45429:277;42320:13;:11;:13::i;:::-;45553:9:::1;45548:141;45568:32:::0;;::::1;45548:141;;;45673:4;45622:22;:48;45645:21;;45667:1;45645:24;;;;;;;:::i;:::-;;;;;;;;;;;;;;:::i;:::-;-1:-1:-1::0;;;;;45622:48:0::1;::::0;;::::1;::::0;::::1;::::0;;;;;;-1:-1:-1;45622:48:0;:55;;-1:-1:-1;;45622:55:0::1;::::0;::::1;;::::0;;;::::1;::::0;;45602:3;::::1;::::0;::::1;:::i;:::-;;;;45548:141;;;;45429:277:::0;;:::o;44980:435::-;45135:4;39484:19;:17;:19::i;:::-;36040:21:::1;:19;:21::i;:::-;45187:7:::2;45174:9;:20;;45166:45;;;::::0;-1:-1:-1;;;45166:45:0;;2081:2:1;45166:45:0::2;::::0;::::2;2063:21:1::0;2120:2;2100:18;;;2093:30;-1:-1:-1;;;2139:18:1;;;2132:42;2191:18;;45166:45:0::2;;;;;;;;;45250:22;::::0;-1:-1:-1;;;;;45250:22:0::2;45230:43;::::0;;;:19:::2;:43;::::0;;;;;::::2;;45222:89;;;::::0;-1:-1:-1;;;45222:89:0;;2422:2:1;45222:89:0::2;::::0;::::2;2404:21:1::0;2461:2;2441:18;;;2434:30;2500:34;2480:18;;;2473:62;-1:-1:-1;;;2551:18:1;;;2544:31;2592:19;;45222:89:0::2;2220:397:1::0;45222:89:0::2;45348:22;::::0;45322:59:::2;::::0;-1:-1:-1;;;;;45348:22:0::2;45373:7:::0;45322:17:::2;:59::i;:::-;-1:-1:-1::0;45403:4:0::2;36084:20:::1;35301:1:::0;36604:22;;36421:213;36084:20:::1;44980:435:::0;;;:::o;43082:103::-;42320:13;:11;:13::i;:::-;43147:30:::1;43174:1;43147:18;:30::i;:::-;43082:103::o:0;43340:201::-;42320:13;:11;:13::i;:::-;-1:-1:-1;;;;;43429:22:0;::::1;43421:73;;;::::0;-1:-1:-1;;;43421:73:0;;2824:2:1;43421:73:0::1;::::0;::::1;2806:21:1::0;2863:2;2843:18;;;2836:30;2902:34;2882:18;;;2875:62;-1:-1:-1;;;2953:18:1;;;2946:36;2999:19;;43421:73:0::1;2622:402:1::0;43421:73:0::1;43505:28;43524:8;43505:18;:28::i;:::-;43340:201:::0;:::o;45714:303::-;42320:13;:11;:13::i;:::-;45853:9:::1;45848:162;45868:42:::0;;::::1;45848:162;;;45993:5;45932:22;:58;45955:31;;45987:1;45955:34;;;;;;;:::i;:::-;;;;;;;;;;;;;;:::i;:::-;-1:-1:-1::0;;;;;45932:58:0::1;::::0;;::::1;::::0;::::1;::::0;;;;;;-1:-1:-1;45932:58:0;:66;;-1:-1:-1;;45932:66:0::1;::::0;::::1;;::::0;;;::::1;::::0;;45912:3;::::1;::::0;::::1;:::i;:::-;;;;45848:162;;44764:208:::0;42320:13;:11;:13::i;:::-;44841:22:::1;:34:::0;;-1:-1:-1;;;;;;44841:34:0::1;-1:-1:-1::0;;;;;44841:34:0;::::1;::::0;;::::1;::::0;;;-1:-1:-1;44886:30:0;;;:19:::1;:30;::::0;;;;;:37;;-1:-1:-1;;44886:37:0::1;-1:-1:-1::0;44886:37:0::1;::::0;;44939:25;::::1;::::0;-1:-1:-1;44939:25:0::1;44764:208:::0;:::o;15344:326::-;-1:-1:-1;;;;;15639:19:0;;:23;;;15344:326::o;42599:132::-;42507:6;;-1:-1:-1;;;;;42507:6:0;37737:10;42663:23;42655:68;;;;-1:-1:-1;;;42655:68:0;;3231:2:1;42655:68:0;;;3213:21:1;;;3250:18;;;3243:30;3309:34;3289:18;;;3282:62;3361:18;;42655:68:0;3029:356:1;40038:108:0;39950:7;;;;40108:9;40100:38;;;;-1:-1:-1;;;40100:38:0;;3592:2:1;40100:38:0;;;3574:21:1;3631:2;3611:18;;;3604:30;-1:-1:-1;;;3650:18:1;;;3643:46;3706:18;;40100:38:0;3390:340:1;36120:293:0;35345:1;36254:7;;:19;;36246:63;;;;-1:-1:-1;;;36246:63:0;;3937:2:1;36246:63:0;;;3919:21:1;3976:2;3956:18;;;3949:30;4015:33;3995:18;;;3988:61;4066:18;;36246:63:0;3735:355:1;36246:63:0;35345:1;36387:7;:18;36120:293::o;2399:317::-;2514:6;2489:21;:31;;2481:73;;;;-1:-1:-1;;;2481:73:0;;4297:2:1;2481:73:0;;;4279:21:1;4336:2;4316:18;;;4309:30;4375:31;4355:18;;;4348:59;4424:18;;2481:73:0;4095:353:1;2481:73:0;2568:12;2586:9;-1:-1:-1;;;;;2586:14:0;2608:6;2586:33;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;2567:52;;;2638:7;2630:78;;;;-1:-1:-1;;;2630:78:0;;4865:2:1;2630:78:0;;;4847:21:1;4904:2;4884:18;;;4877:30;4943:34;4923:18;;;4916:62;5014:28;4994:18;;;4987:56;5060:19;;2630:78:0;4663:422:1;43701:191:0;43794:6;;;-1:-1:-1;;;;;43811:17:0;;;-1:-1:-1;;;;;;43811:17:0;;;;;;;43844:40;;43794:6;;;43811:17;43794:6;;43844:40;;43775:16;;43844:40;43764:128;43701:191;:::o;14:615:1:-;100:6;108;161:2;149:9;140:7;136:23;132:32;129:52;;;177:1;174;167:12;129:52;217:9;204:23;246:18;287:2;279:6;276:14;273:34;;;303:1;300;293:12;273:34;341:6;330:9;326:22;316:32;;386:7;379:4;375:2;371:13;367:27;357:55;;408:1;405;398:12;357:55;448:2;435:16;474:2;466:6;463:14;460:34;;;490:1;487;480:12;460:34;543:7;538:2;528:6;525:1;521:14;517:2;513:23;509:32;506:45;503:65;;;564:1;561;554:12;503:65;595:2;587:11;;;;;617:6;;-1:-1:-1;14:615:1;;-1:-1:-1;;;;14:615:1:o;826:180::-;885:6;938:2;926:9;917:7;913:23;909:32;906:52;;;954:1;951;944:12;906:52;-1:-1:-1;977:23:1;;826:180;-1:-1:-1;826:180:1:o;1219:286::-;1278:6;1331:2;1319:9;1310:7;1306:23;1302:32;1299:52;;;1347:1;1344;1337:12;1299:52;1373:23;;-1:-1:-1;;;;;1425:31:1;;1415:42;;1405:70;;1471:1;1468;1461:12;1405:70;1494:5;1219:286;-1:-1:-1;;;1219:286:1:o;1510:127::-;1571:10;1566:3;1562:20;1559:1;1552:31;1602:4;1599:1;1592:15;1626:4;1623:1;1616:15;1642:232;1681:3;-1:-1:-1;;1702:17:1;;1699:140;;;1761:10;1756:3;1752:20;1749:1;1742:31;1796:4;1793:1;1786:15;1824:4;1821:1;1814:15;1699:140;-1:-1:-1;1866:1:1;1855:13;;1642:232::o

ipfs://0e983ed669667852c61217da53507bb87b4c26bace2d0748a1030f81c1dfaa32