Contract

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.19;

import "openzeppelin-contracts/contracts/access/Ownable.sol";
import "openzeppelin-contracts/contracts/utils/math/SafeMath.sol";
import "openzeppelin-contracts/contracts/token/ERC20/utils/SafeERC20.sol";

/// @title IncentivesVesting
/// @author @ZackZeroLiquid
/// @dev A token holder contract that can release its token balance gradually like a
/// typical vesting scheme, with a cliff and vesting period. Optionally revocable by the owner.
contract IncentivesVesting is Ownable {
    // The vesting schedule is time-based (i.e. using block timestamps as opposed to e.g. block numbers), and is
    // therefore sensitive to timestamp manipulation (which is something miners can do, to a certain degree). Therefore,
    // it is recommended to avoid using short time durations (less than a minute). Typical vesting schemes, with a
    // cliff period of a year and a duration of four years, are safe to use.
    // solhint-disable not-rely-on-time
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    event TokensReleased(address token, uint256 amount);
    event TokenVestingRevoked(address token);

    // beneficiary of tokens after they are released
    address private immutable _beneficiary;

    // Durations and timestamps are expressed in UNIX time, the same units as block.timestamp.
    uint256 private immutable _cliff;
    uint256 private immutable _start;
    uint256 private immutable _duration;

    bool private _revocable;

    mapping(address => uint256) private _released;
    mapping(address => bool) private _revoked;

    /// @dev Creates a vesting contract that vests its balance of any ERC20 token to the
    /// beneficiary, gradually in a linear fashion until start + duration. By then all
    /// of the balance will have vested.
    /// @param beneficiaryAddress address of the beneficiary to whom vested tokens are transferred
    /// @param cliffDuration duration in seconds of the cliff in which tokens will begin to vest
    /// @param vestingDuration duration in seconds of the period in which the tokens will vest
    constructor(address beneficiaryAddress, uint256 cliffDuration, uint256 vestingDuration) {
        uint256 startTimestamp = block.timestamp;

        require(beneficiaryAddress != address(0), "IncentivesVesting:: beneficiary can not be zero address");
        require(cliffDuration <= vestingDuration, "IncentivesVesting:: cliff is longer than duration");
        require(vestingDuration > 0, "IncentivesVesting:: duration is 0");
        require(
            startTimestamp.add(vestingDuration) > block.timestamp,
            "IncentivesVesting:: final time is before current time"
        );

        _beneficiary = beneficiaryAddress;
        _cliff = startTimestamp.add(cliffDuration);
        _start = startTimestamp;
        _duration = vestingDuration;
        _revocable = false;
    }

    /// @return _beneficiary the beneficiary of the tokens.
    function beneficiary() public view returns (address) {
        return _beneficiary;
    }

    /// @return _cliff the cliff time of the token vesting.
    function cliff() public view returns (uint256) {
        return _cliff;
    }

    /// @return _start the start time of the token vesting.
    function start() public view returns (uint256) {
        return _start;
    }

    /// @return _duration the duration of the token vesting.
    function duration() public view returns (uint256) {
        return _duration;
    }

    /// @return _revocable true if the vesting is revocable.
    function revocable() public view returns (bool) {
        return _revocable;
    }

    /// @return _released the amount of the token released.
    function released(address token) public view returns (uint256) {
        return _released[token];
    }

    /// @return _revoked true if the token is revoked.
    function revoked(address token) public view returns (bool) {
        return _revoked[token];
    }

    /// @notice Transfers vested tokens to beneficiary.
    /// @param token ERC20 token which is being vested
    function release(IERC20 token) public {
        uint256 unreleased = _releasableAmount(token);

        require(unreleased > 0, "IncentivesVesting:: no tokens are due");

        _released[address(token)] = _released[address(token)].add(unreleased);

        token.safeTransfer(_beneficiary, unreleased);

        emit TokensReleased(address(token), unreleased);
    }

    /// @notice Allows the owner to revoke the vesting. Tokens already vested
    /// remain in the contract, the rest are returned to the owner.
    /// @param token ERC20 token which is being vested
    function revoke(IERC20 token) public onlyOwner {
        require(_revocable, "IncentivesVesting:: cannot revoke");
        require(!_revoked[address(token)], "IncentivesVesting:: vesting already revoked");

        uint256 balance = token.balanceOf(address(this));

        uint256 unreleased = _releasableAmount(token);
        uint256 refund = balance.sub(unreleased);

        _revoked[address(token)] = true;

        token.safeTransfer(owner(), refund);

        emit TokenVestingRevoked(address(token));
    }

    /// @dev Calculates the amount that has already vested but hasn't been released yet.
    /// @param token ERC20 token which is being vested
    function _releasableAmount(IERC20 token) private view returns (uint256) {
        return _vestedAmount(token).sub(_released[address(token)]);
    }

    /// @dev Calculates the amount that has already vested.
    /// @param token ERC20 token which is being vested
    function _vestedAmount(IERC20 token) private view returns (uint256) {
        uint256 currentBalance = token.balanceOf(address(this));
        uint256 totalBalance = currentBalance.add(_released[address(token)]);

        if (block.timestamp < _cliff) {
            return 0;
        } else if (block.timestamp >= _start.add(_duration) || _revoked[address(token)]) {
            return totalBalance;
        } else {
            return totalBalance.mul(block.timestamp.sub(_start)).div(_duration);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Compatible with tokens that require the approval to be set to
     * 0 before setting it to a non-zero value.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
     * Revert on invalid signature.
     */
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return
            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (utils/math/SafeMath.sol)

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

{
  "remappings": [
    "@prb/test/=lib/prb-test/src/",
    "ds-test/=lib/forge-std/lib/ds-test/src/",
    "erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
    "forge-std/=lib/forge-std/src/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/",
    "prb-math/=lib/prb-math/src/",
    "prb-test/=lib/prb-test/src/",
    "src/=src/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 10000
  },
  "metadata": {
    "bytecodeHash": "none",
    "appendCBOR": false
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "london",
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"beneficiaryAddress","type":"address"},{"internalType":"uint256","name":"cliffDuration","type":"uint256"},{"internalType":"uint256","name":"vestingDuration","type":"uint256"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"token","type":"address"}],"name":"TokenVestingRevoked","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"token","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"TokensReleased","type":"event"},{"inputs":[],"name":"beneficiary","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"cliff","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"duration","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"}],"name":"release","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"released","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"revocable","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"}],"name":"revoke","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"revoked","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"start","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"}]

6101006040523480156200001257600080fd5b5060405162001367380380620013678339810160408190526200003591620002ab565b620000403362000244565b426001600160a01b038416620000c35760405162461bcd60e51b815260206004820152603760248201527f496e63656e746976657356657374696e673a3a2062656e65666963696172792060448201527f63616e206e6f74206265207a65726f206164647265737300000000000000000060648201526084015b60405180910390fd5b818311156200012f5760405162461bcd60e51b815260206004820152603160248201527f496e63656e746976657356657374696e673a3a20636c696666206973206c6f6e60448201527033b2b9103a3430b710323ab930ba34b7b760791b6064820152608401620000ba565b600082116200018b5760405162461bcd60e51b815260206004820152602160248201527f496e63656e746976657356657374696e673a3a206475726174696f6e206973206044820152600360fc1b6064820152608401620000ba565b4262000198828462000294565b116200020d5760405162461bcd60e51b815260206004820152603560248201527f496e63656e746976657356657374696e673a3a2066696e616c2074696d65206960448201527f73206265666f72652063757272656e742074696d6500000000000000000000006064820152608401620000ba565b6001600160a01b03841660805262000226818462000294565b60a05260c05260e05250506000805460ff60a01b1916905562000312565b600080546001600160a01b038381166001600160a01b0319831681178455604051919092169283917f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e09190a35050565b6000620002a28284620002f0565b90505b92915050565b600080600060608486031215620002c157600080fd5b83516001600160a01b0381168114620002d957600080fd5b602085015160409095015190969495509392505050565b80820180821115620002a557634e487b7160e01b600052601160045260246000fd5b60805160a05160c05160e051610ff2620003756000396000818160db01528181610adf0152610b4701526000818161023001528181610abe0152610b6f0152600081816101100152610a8901526000818161014b01526103a10152610ff26000f3fe608060405234801561001057600080fd5b50600436106100d45760003560e01c8063872a781011610081578063be9a65551161005b578063be9a65551461022e578063f2fde38b14610254578063fa01dc061461026757600080fd5b8063872a7810146101ab5780638da5cb5b146101da5780639852595c146101f857600080fd5b806338af3eed116100b257806338af3eed14610149578063715018a61461019057806374a8f1031461019857600080fd5b80630fb5a6b4146100d957806313d033c01461010e5780631916558714610134575b600080fd5b7f00000000000000000000000000000000000000000000000000000000000000005b6040519081526020015b60405180910390f35b7f00000000000000000000000000000000000000000000000000000000000000006100fb565b610147610142366004610e62565b6102a0565b005b7f00000000000000000000000000000000000000000000000000000000000000005b60405173ffffffffffffffffffffffffffffffffffffffff9091168152602001610105565b610147610419565b6101476101a6366004610e62565b61042d565b60005474010000000000000000000000000000000000000000900460ff165b6040519015158152602001610105565b60005473ffffffffffffffffffffffffffffffffffffffff1661016b565b6100fb610206366004610e62565b73ffffffffffffffffffffffffffffffffffffffff1660009081526001602052604090205490565b7f00000000000000000000000000000000000000000000000000000000000000006100fb565b610147610262366004610e62565b610720565b6101ca610275366004610e62565b73ffffffffffffffffffffffffffffffffffffffff1660009081526002602052604090205460ff1690565b60006102ab826107d7565b905060008111610342576040517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152602560248201527f496e63656e746976657356657374696e673a3a206e6f20746f6b656e7320617260448201527f652064756500000000000000000000000000000000000000000000000000000060648201526084015b60405180910390fd5b73ffffffffffffffffffffffffffffffffffffffff82166000908152600160205260409020546103729082610816565b73ffffffffffffffffffffffffffffffffffffffff83166000818152600160205260409020919091556103c6907f000000000000000000000000000000000000000000000000000000000000000083610829565b6040805173ffffffffffffffffffffffffffffffffffffffff84168152602081018390527fc7798891864187665ac6dd119286e44ec13f014527aeeb2b8eb3fd413df93179910160405180910390a15050565b6104216108bb565b61042b600061093c565b565b6104356108bb565b60005474010000000000000000000000000000000000000000900460ff166104df576040517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152602160248201527f496e63656e746976657356657374696e673a3a2063616e6e6f74207265766f6b60448201527f65000000000000000000000000000000000000000000000000000000000000006064820152608401610339565b73ffffffffffffffffffffffffffffffffffffffff811660009081526002602052604090205460ff1615610595576040517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152602b60248201527f496e63656e746976657356657374696e673a3a2076657374696e6720616c726560448201527f616479207265766f6b65640000000000000000000000000000000000000000006064820152608401610339565b6040517f70a0823100000000000000000000000000000000000000000000000000000000815230600482015260009073ffffffffffffffffffffffffffffffffffffffff8316906370a0823190602401602060405180830381865afa158015610602573d6000803e3d6000fd5b505050506040513d601f19601f820116820180604052508101906106269190610e7f565b90506000610633836107d7565b9050600061064183836109b1565b73ffffffffffffffffffffffffffffffffffffffff8516600090815260026020526040902080547fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff0016600117905590506106d16106b360005473ffffffffffffffffffffffffffffffffffffffff1690565b73ffffffffffffffffffffffffffffffffffffffff86169083610829565b60405173ffffffffffffffffffffffffffffffffffffffff851681527f39983c6d4d174a7aee564f449d4a5c3c7ac9649d72b7793c56901183996f8af69060200160405180910390a150505050565b6107286108bb565b73ffffffffffffffffffffffffffffffffffffffff81166107cb576040517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152602660248201527f4f776e61626c653a206e6577206f776e657220697320746865207a65726f206160448201527f64647265737300000000000000000000000000000000000000000000000000006064820152608401610339565b6107d48161093c565b50565b73ffffffffffffffffffffffffffffffffffffffff81166000908152600160205260408120546108109061080a846109bd565b906109b1565b92915050565b60006108228284610ec7565b9392505050565b6040805173ffffffffffffffffffffffffffffffffffffffff8416602482015260448082018490528251808303909101815260649091019091526020810180517bffffffffffffffffffffffffffffffffffffffffffffffffffffffff167fa9059cbb000000000000000000000000000000000000000000000000000000001790526108b6908490610ba8565b505050565b60005473ffffffffffffffffffffffffffffffffffffffff16331461042b576040517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820181905260248201527f4f776e61626c653a2063616c6c6572206973206e6f7420746865206f776e65726044820152606401610339565b6000805473ffffffffffffffffffffffffffffffffffffffff8381167fffffffffffffffffffffffff0000000000000000000000000000000000000000831681178455604051919092169283917f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e09190a35050565b60006108228284610eda565b6040517f70a08231000000000000000000000000000000000000000000000000000000008152306004820152600090819073ffffffffffffffffffffffffffffffffffffffff8416906370a0823190602401602060405180830381865afa158015610a2c573d6000803e3d6000fd5b505050506040513d601f19601f82011682018060405250810190610a509190610e7f565b73ffffffffffffffffffffffffffffffffffffffff841660009081526001602052604081205491925090610a85908390610816565b90507f0000000000000000000000000000000000000000000000000000000000000000421015610ab9575060009392505050565b610b037f00000000000000000000000000000000000000000000000000000000000000007f0000000000000000000000000000000000000000000000000000000000000000610816565b42101580610b36575073ffffffffffffffffffffffffffffffffffffffff841660009081526002602052604090205460ff165b15610b42579392505050565b610ba07f0000000000000000000000000000000000000000000000000000000000000000610b9a610b93427f00000000000000000000000000000000000000000000000000000000000000006109b1565b8490610cb7565b90610cc3565b949350505050565b6000610c0a826040518060400160405280602081526020017f5361666545524332303a206c6f772d6c6576656c2063616c6c206661696c65648152508573ffffffffffffffffffffffffffffffffffffffff16610ccf9092919063ffffffff16565b9050805160001480610c2b575080806020019051810190610c2b9190610eed565b6108b6576040517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152602a60248201527f5361666545524332303a204552433230206f7065726174696f6e20646964206e60448201527f6f742073756363656564000000000000000000000000000000000000000000006064820152608401610339565b60006108228284610f0f565b60006108228284610f26565b6060610ba08484600085856000808673ffffffffffffffffffffffffffffffffffffffff168587604051610d039190610f85565b60006040518083038185875af1925050503d8060008114610d40576040519150601f19603f3d011682016040523d82523d6000602084013e610d45565b606091505b5091509150610d5687838387610d61565b979650505050505050565b60608315610df7578251600003610df05773ffffffffffffffffffffffffffffffffffffffff85163b610df0576040517f08c379a000000000000000000000000000000000000000000000000000000000815260206004820152601d60248201527f416464726573733a2063616c6c20746f206e6f6e2d636f6e74726163740000006044820152606401610339565b5081610ba0565b610ba08383815115610e0c5781518083602001fd5b806040517f08c379a00000000000000000000000000000000000000000000000000000000081526004016103399190610fa1565b73ffffffffffffffffffffffffffffffffffffffff811681146107d457600080fd5b600060208284031215610e7457600080fd5b813561082281610e40565b600060208284031215610e9157600080fd5b5051919050565b7f4e487b7100000000000000000000000000000000000000000000000000000000600052601160045260246000fd5b8082018082111561081057610810610e98565b8181038181111561081057610810610e98565b600060208284031215610eff57600080fd5b8151801515811461082257600080fd5b808202811582820484141761081057610810610e98565b600082610f5c577f4e487b7100000000000000000000000000000000000000000000000000000000600052601260045260246000fd5b500490565b60005b83811015610f7c578181015183820152602001610f64565b50506000910152565b60008251610f97818460208701610f61565b9190910192915050565b6020815260008251806020840152610fc0816040850160208701610f61565b601f017fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffe0169190910160400192915050560000000000000000000000005b9dd9c8e2ddfb91ed1a6dfcf2a0a0605e2f6bf30000000000000000000000000000000000000000000000000000000000278d000000000000000000000000000000000000000000000000000000000004ca1300

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

0000000000000000000000005b9dd9c8e2ddfb91ed1a6dfcf2a0a0605e2f6bf30000000000000000000000000000000000000000000000000000000000278d000000000000000000000000000000000000000000000000000000000004ca1300

-----Decoded View---------------
Arg [0] : beneficiaryAddress (address): 0x5B9Dd9C8e2DDfb91Ed1a6DFCf2A0A0605e2F6BF3
Arg [1] : cliffDuration (uint256): 2592000
Arg [2] : vestingDuration (uint256): 80352000

-----Encoded View---------------
3 Constructor Arguments found :
Arg [0] : 0000000000000000000000005b9dd9c8e2ddfb91ed1a6dfcf2a0a0605e2f6bf3
Arg [1] : 0000000000000000000000000000000000000000000000000000000000278d00
Arg [2] : 0000000000000000000000000000000000000000000000000000000004ca1300