Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.15;

import {ERC721} from "lib/openzeppelin-contracts/contracts/token/ERC721/ERC721.sol";
import {IERC721} from "lib/openzeppelin-contracts/contracts/token/ERC721/IERC721.sol";
import {IERC20} from "lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol";
import {DefaultOperatorFilterer} from "lib/operator-filter-registry/src/DefaultOperatorFilterer.sol";
import {Ownable} from "lib/openzeppelin-contracts/contracts/access/Ownable.sol";
import {Pausable} from "lib/openzeppelin-contracts/contracts/security/Pausable.sol";
import {Strings} from "lib/openzeppelin-contracts/contracts/utils/Strings.sol";

/**
    @title  Ordinalist by Funerals
    @author curion, opensea, openzeppelin
        -1000 => 500 reserved for pendings holders, 500+remainder public mint
    @notice methods: 2 pendings == 1 ordinalist, burn 6 transactions == 1 ordinalist. public mint remaining supply
 */
contract PENDINGS_BTM is ERC721, DefaultOperatorFilterer, Ownable {
    using Strings for uint256;

    address public paymentSplitterAddress;
    address public pendingsAddress;
    address public transactionsAddress;
    address public deadAddress = 0x000000000000000000000000000000000000dEaD;
    
    bool public publicMintIsOpen = false;
    bool public burnTransactionsMintIsOpen = false;
    bool public pendingsHolderClaimIsOpen = false;

    string private baseURI;

    /// @notice collection-specific params
    uint256 public amountMinted = 0;
    uint256 public totalSupply = 1000;
    uint256 public mintPrice = 0.069 ether;
    uint256 public mintLimitPerTxnAndWallet = 5;
    uint256 public pendingsRequiredForClaim = 2;
    uint256 public transactionsToBurnForFreeToken = 6;
    uint256 public burnedTransactionCount = 0;
    
    uint256 public publicAmountMinted = 0;
    uint256 public holderAmountMinted = 0;
    uint256 public reservedForHoldersAmount = 500;

    mapping (address => uint256) public mintedByAddress;
    mapping (uint256 => bool) public pendingsIdUsedForClaim;

    error MaxSupplyReached();
    error MaxSupplyWillBeReached();
    error ForwardFailed();
    error QueryForNonexistentToken();
    error InsufficientFunds();
    error PublicConditionsNotMet();
    error PendingsTokenAlreadyUsedForClaim();
    error MintIsClosed();
    error MathError();
    error NotTokenOwner();
    error InvalidNumberOfPendingsUsedForClaim();
    error InvalidNumberOfTransactionsToBeBurned();

    constructor() ERC721("Ordinalist", "ORD") {}

    // fallback payable functions for anything sent to contract not via mint functions
    receive() external payable {} //msg.data must be empty
    fallback() external payable {} //when msg.data is not empty

    //=========================================================================
    // MINTING
    //=========================================================================

    modifier publicMintChecks(uint256 _amount) {
        if(!publicMintIsOpen && msg.sender != owner()) { revert MintIsClosed(); }
        if(_amount == 0) { revert PublicConditionsNotMet(); }
        if(msg.value < mintPrice * _amount) { revert InsufficientFunds(); }
        if(mintedByAddress[msg.sender] + _amount > mintLimitPerTxnAndWallet) { revert PublicConditionsNotMet(); }
        if(publicAmountMinted + _amount > totalSupply - reservedForHoldersAmount) { revert MaxSupplyWillBeReached(); }
        _;        
    }

    modifier totalSupplyChecks(uint256 _amount) {
        if(_amount == 0) { revert MathError(); }
        if(amountMinted >= totalSupply) { revert MaxSupplyReached(); }
        if(amountMinted + _amount > totalSupply) { revert MaxSupplyWillBeReached(); }
        _;
    }

    function mintPublic(uint256 _amount) 
        external 
        payable 
        publicMintChecks(_amount) 
        totalSupplyChecks(_amount) 
    {
        
        mintedByAddress[msg.sender] += _amount;
        
        for(uint256 i = 0; i < _amount; ++i){
            ++amountMinted;
            ++publicAmountMinted;
            _safeMint(msg.sender, amountMinted);
        }

    }

    /// @notice owners of 2 pendings can claim 1 token

    function pendingsHolderClaim(uint256[] memory _pendingsIds) 
        external   
        totalSupplyChecks(_pendingsIds.length/pendingsRequiredForClaim)
    {
        if(!pendingsHolderClaimIsOpen) { revert MintIsClosed(); }
        if(_pendingsIds.length % pendingsRequiredForClaim != 0) { revert InvalidNumberOfPendingsUsedForClaim(); }
        if(_pendingsIds.length < pendingsRequiredForClaim) { revert InvalidNumberOfPendingsUsedForClaim(); }
        if(_pendingsIds.length/pendingsRequiredForClaim + holderAmountMinted > reservedForHoldersAmount) { revert MaxSupplyWillBeReached(); }

        address sender = msg.sender;
        uint256 thisPendingId;
        holderAmountMinted += _pendingsIds.length/pendingsRequiredForClaim;

        for(uint256 i = 0; i < _pendingsIds.length; ++i){
            thisPendingId = _pendingsIds[i];
            if(IERC721(pendingsAddress).ownerOf(thisPendingId)!=sender){ revert NotTokenOwner(); }
            if(pendingsIdUsedForClaim[thisPendingId]){ revert PendingsTokenAlreadyUsedForClaim(); }
            pendingsIdUsedForClaim[thisPendingId] = true;
        }

        for(uint256 i = 0; i < _pendingsIds.length/pendingsRequiredForClaim; ++i){
            ++amountMinted;
            _safeMint(sender, amountMinted);
        }

    }

    /// @notice must burn N%6 transactions to mint 1 token, i.e. burn 12 get 2.

    function burnToClaim(uint256[] memory _transactionIds) 
        external 
        totalSupplyChecks(_transactionIds.length/transactionsToBurnForFreeToken) 
    {
        if(!burnTransactionsMintIsOpen) { revert MintIsClosed(); }

        //must burn the exact amount of transactions to free drop
        if(_transactionIds.length % transactionsToBurnForFreeToken != 0) { revert InvalidNumberOfTransactionsToBeBurned(); }
        if(_transactionIds.length < transactionsToBurnForFreeToken) { revert InvalidNumberOfTransactionsToBeBurned(); }
        if(_transactionIds.length/transactionsToBurnForFreeToken + holderAmountMinted > reservedForHoldersAmount) { revert MaxSupplyWillBeReached(); }

        address sender = msg.sender;
        uint256 thisTransactionId;

        for(uint256 i=0; i<_transactionIds.length; ++i){
            thisTransactionId = _transactionIds[i];
            if(ERC721(transactionsAddress).ownerOf(thisTransactionId) != sender) { revert NotTokenOwner(); }
            ERC721(transactionsAddress).transferFrom(sender, deadAddress, thisTransactionId);
        }

        holderAmountMinted += _transactionIds.length/transactionsToBurnForFreeToken;
        burnedTransactionCount += _transactionIds.length;       

        for(uint256 i=0; i<_transactionIds.length/transactionsToBurnForFreeToken; ++i){
            ++amountMinted;
            _safeMint(sender, amountMinted);
        }
    }

    /// @notice "burning" remaining supply reduce it beyond the originally planned supply
    function reduceMaxSupply(uint256 _amount) external onlyOwner {
        if(totalSupply-_amount < amountMinted) { revert MathError(); }
        totalSupply -= _amount;
    }

    function burn(uint256 tokenId) external {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");
        _burn(tokenId);
    }

    //=========================================================================
    // SETTERS
    //=========================================================================

    function setreservedForHoldersAmount(uint256 _reservedForHoldersAmount) external onlyOwner {
        reservedForHoldersAmount = _reservedForHoldersAmount;
    }
    
    function setPublicMintIsOpen(bool _publicMintIsOpen) external onlyOwner {
        publicMintIsOpen = _publicMintIsOpen;
    }

    function setBurnTransactionsMintIsOpen(bool _burnTransactionsMintIsOpen) external onlyOwner {
        burnTransactionsMintIsOpen = _burnTransactionsMintIsOpen;
    }

    function setPendingsHolderClaimIsOpen(bool _pendingsHolderClaimIsOpen) external onlyOwner {
        pendingsHolderClaimIsOpen = _pendingsHolderClaimIsOpen;
    }

    function setNumberOfTransactionsToBurn(uint256 _transactionsToBurnForFreeToken) external onlyOwner {
        transactionsToBurnForFreeToken = _transactionsToBurnForFreeToken;
    }

    function setMaxMintsPerWallet(uint256 _mintLimitPerTxnAndWallet) external onlyOwner {
        mintLimitPerTxnAndWallet = _mintLimitPerTxnAndWallet;
    }
    
    function setPaymentSplitterAddress(address payable _paymentSplitterAddress) external onlyOwner {
        require(_paymentSplitterAddress != address(0));
        paymentSplitterAddress = payable(_paymentSplitterAddress);
    }

    function setPendingsAddress(address _pendingsAddress) external onlyOwner {
        pendingsAddress = _pendingsAddress;
    }
    
    function setTransactionsAddress(address _transactionsAddress) external onlyOwner {
        transactionsAddress = _transactionsAddress;
    }

    function setBaseURI(string memory _uri) external onlyOwner {
        baseURI = _uri;
    }

    function setMintPrice(uint256 _mintPrice) external onlyOwner {
        mintPrice = _mintPrice;
    }

    function setHolderClaimAmounts(uint256 _pendingsRequiredForClaim, uint256 _transactionsToBurnForFreeToken) external onlyOwner {
        pendingsRequiredForClaim = _pendingsRequiredForClaim;
        transactionsToBurnForFreeToken = _transactionsToBurnForFreeToken;
    }

    /// @notice in the case that one burn address doesnt work - just covering bases, but want to make sure the address cant be a non-burn address
    function toggleDeadAddress() external onlyOwner {
        if(deadAddress == address(0)) {
            deadAddress = 0x000000000000000000000000000000000000dEaD;
        } else {
            deadAddress = address(0);
        }
    }

    //=========================================================================
    // GETTERS
    //=========================================================================

    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        if( !_exists(tokenId) ) { revert QueryForNonexistentToken(); }
        return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString(), ".json")) : "";
    }

    function uri(uint256 tokenId) public view returns (string memory) {
        return tokenURI(tokenId);
    }

    function getTotalMintedSoFar() external view returns (uint256) {
        return amountMinted;
    }

    function getBurnedTransactionCount() external view returns (uint256) {
        return burnedTransactionCount;
    }

    //=========================================================================
    // WITHDRAWALS
    //=========================================================================

    function withdrawERC20FromContract(address _to, address _token) external onlyOwner {
        bool os = IERC20(_token).transfer(_to, IERC20(_token).balanceOf(address(this)));
        if(!os){ revert ForwardFailed(); }
    }

    function withdrawEthFromContract() external onlyOwner  {
        require(paymentSplitterAddress != address(0), "Payment splitter address not set");
        (bool os, ) = payable(paymentSplitterAddress).call{ value: address(this).balance }('');
        if(!os){ revert ForwardFailed(); }
    }

    //=========================================================================
    // OPENSEA-PROVIDED OVERRIDES for OPERATOR FILTER REGISTRY
    //=========================================================================

    function setApprovalForAll(address operator, bool approved) public override onlyAllowedOperatorApproval(operator) {
        super.setApprovalForAll(operator, approved);
    }

    function approve(address operator, uint256 tokenId) public override onlyAllowedOperatorApproval(operator) {
        super.approve(operator, tokenId);
    }

    function transferFrom(address from, address to, uint256 tokenId) public override onlyAllowedOperator(from) {
        super.transferFrom(from, to, tokenId);
    }

    function safeTransferFrom(address from, address to, uint256 tokenId) public override onlyAllowedOperator(from) {
        super.safeTransferFrom(from, to, tokenId);
    }

    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data)
        public
        override
        onlyAllowedOperator(from)
    {
        super.safeTransferFrom(from, to, tokenId, data);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (security/Pausable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor() {
        _paused = false;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        _requireNotPaused();
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        _requirePaused();
        _;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Throws if the contract is paused.
     */
    function _requireNotPaused() internal view virtual {
        require(!paused(), "Pausable: paused");
    }

    /**
     * @dev Throws if the contract is not paused.
     */
    function _requirePaused() internal view virtual {
        require(paused(), "Pausable: not paused");
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/ERC721.sol)

pragma solidity ^0.8.0;

import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";

/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension, but not including the Enumerable extension, which is available separately as
 * {ERC721Enumerable}.
 */
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
    using Address for address;
    using Strings for uint256;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Mapping from token ID to owner address
    mapping(uint256 => address) private _owners;

    // Mapping owner address to token count
    mapping(address => uint256) private _balances;

    // Mapping from token ID to approved address
    mapping(uint256 => address) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC721).interfaceId ||
            interfaceId == type(IERC721Metadata).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        require(owner != address(0), "ERC721: address zero is not a valid owner");
        return _balances[owner];
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view virtual override returns (address) {
        address owner = _ownerOf(tokenId);
        require(owner != address(0), "ERC721: invalid token ID");
        return owner;
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        _requireMinted(tokenId);

        string memory baseURI = _baseURI();
        return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, can be overridden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return "";
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public virtual override {
        address owner = ERC721.ownerOf(tokenId);
        require(to != owner, "ERC721: approval to current owner");

        require(
            _msgSender() == owner || isApprovedForAll(owner, _msgSender()),
            "ERC721: approve caller is not token owner or approved for all"
        );

        _approve(to, tokenId);
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view virtual override returns (address) {
        _requireMinted(tokenId);

        return _tokenApprovals[tokenId];
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");

        _transfer(from, to, tokenId);
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes memory data
    ) public virtual override {
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");
        _safeTransfer(from, to, tokenId, data);
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * `data` is additional data, it has no specified format and it is sent in call to `to`.
     *
     * This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
     * implement alternative mechanisms to perform token transfer, such as signature-based.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeTransfer(
        address from,
        address to,
        uint256 tokenId,
        bytes memory data
    ) internal virtual {
        _transfer(from, to, tokenId);
        require(_checkOnERC721Received(from, to, tokenId, data), "ERC721: transfer to non ERC721Receiver implementer");
    }

    /**
     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist
     */
    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {
        return _owners[tokenId];
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted (`_mint`),
     * and stop existing when they are burned (`_burn`).
     */
    function _exists(uint256 tokenId) internal view virtual returns (bool) {
        return _ownerOf(tokenId) != address(0);
    }

    /**
     * @dev Returns whether `spender` is allowed to manage `tokenId`.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
        address owner = ERC721.ownerOf(tokenId);
        return (spender == owner || isApprovedForAll(owner, spender) || getApproved(tokenId) == spender);
    }

    /**
     * @dev Safely mints `tokenId` and transfers it to `to`.
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(address to, uint256 tokenId) internal virtual {
        _safeMint(to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeMint(
        address to,
        uint256 tokenId,
        bytes memory data
    ) internal virtual {
        _mint(to, tokenId);
        require(
            _checkOnERC721Received(address(0), to, tokenId, data),
            "ERC721: transfer to non ERC721Receiver implementer"
        );
    }

    /**
     * @dev Mints `tokenId` and transfers it to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - `to` cannot be the zero address.
     *
     * Emits a {Transfer} event.
     */
    function _mint(address to, uint256 tokenId) internal virtual {
        require(to != address(0), "ERC721: mint to the zero address");
        require(!_exists(tokenId), "ERC721: token already minted");

        _beforeTokenTransfer(address(0), to, tokenId, 1);

        // Check that tokenId was not minted by `_beforeTokenTransfer` hook
        require(!_exists(tokenId), "ERC721: token already minted");

        unchecked {
            // Will not overflow unless all 2**256 token ids are minted to the same owner.
            // Given that tokens are minted one by one, it is impossible in practice that
            // this ever happens. Might change if we allow batch minting.
            // The ERC fails to describe this case.
            _balances[to] += 1;
        }

        _owners[tokenId] = to;

        emit Transfer(address(0), to, tokenId);

        _afterTokenTransfer(address(0), to, tokenId, 1);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     * This is an internal function that does not check if the sender is authorized to operate on the token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal virtual {
        address owner = ERC721.ownerOf(tokenId);

        _beforeTokenTransfer(owner, address(0), tokenId, 1);

        // Update ownership in case tokenId was transferred by `_beforeTokenTransfer` hook
        owner = ERC721.ownerOf(tokenId);

        // Clear approvals
        delete _tokenApprovals[tokenId];

        unchecked {
            // Cannot overflow, as that would require more tokens to be burned/transferred
            // out than the owner initially received through minting and transferring in.
            _balances[owner] -= 1;
        }
        delete _owners[tokenId];

        emit Transfer(owner, address(0), tokenId);

        _afterTokenTransfer(owner, address(0), tokenId, 1);
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {
        require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
        require(to != address(0), "ERC721: transfer to the zero address");

        _beforeTokenTransfer(from, to, tokenId, 1);

        // Check that tokenId was not transferred by `_beforeTokenTransfer` hook
        require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");

        // Clear approvals from the previous owner
        delete _tokenApprovals[tokenId];

        unchecked {
            // `_balances[from]` cannot overflow for the same reason as described in `_burn`:
            // `from`'s balance is the number of token held, which is at least one before the current
            // transfer.
            // `_balances[to]` could overflow in the conditions described in `_mint`. That would require
            // all 2**256 token ids to be minted, which in practice is impossible.
            _balances[from] -= 1;
            _balances[to] += 1;
        }
        _owners[tokenId] = to;

        emit Transfer(from, to, tokenId);

        _afterTokenTransfer(from, to, tokenId, 1);
    }

    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * Emits an {Approval} event.
     */
    function _approve(address to, uint256 tokenId) internal virtual {
        _tokenApprovals[tokenId] = to;
        emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Emits an {ApprovalForAll} event.
     */
    function _setApprovalForAll(
        address owner,
        address operator,
        bool approved
    ) internal virtual {
        require(owner != operator, "ERC721: approve to caller");
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Reverts if the `tokenId` has not been minted yet.
     */
    function _requireMinted(uint256 tokenId) internal view virtual {
        require(_exists(tokenId), "ERC721: invalid token ID");
    }

    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
     * The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory data
    ) private returns (bool) {
        if (to.isContract()) {
            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {
                return retval == IERC721Receiver.onERC721Received.selector;
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    revert("ERC721: transfer to non ERC721Receiver implementer");
                } else {
                    /// @solidity memory-safe-assembly
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        } else {
            return true;
        }
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting and burning. If {ERC721Consecutive} is
     * used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s tokens will be transferred to `to`.
     * - When `from` is zero, the tokens will be minted for `to`.
     * - When `to` is zero, ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     * - `batchSize` is non-zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256, /* firstTokenId */
        uint256 batchSize
    ) internal virtual {
        if (batchSize > 1) {
            if (from != address(0)) {
                _balances[from] -= batchSize;
            }
            if (to != address(0)) {
                _balances[to] += batchSize;
            }
        }
    }

    /**
     * @dev Hook that is called after any token transfer. This includes minting and burning. If {ERC721Consecutive} is
     * used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s tokens were transferred to `to`.
     * - When `from` is zero, the tokens were minted for `to`.
     * - When `to` is zero, ``from``'s tokens were burned.
     * - `from` and `to` are never both zero.
     * - `batchSize` is non-zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 firstTokenId,
        uint256 batchSize
    ) internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/IERC721.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
     * understand this adds an external call which potentially creates a reentrancy vulnerability.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

import "./math/Math.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10**64) {
                value /= 10**64;
                result += 64;
            }
            if (value >= 10**32) {
                value /= 10**32;
                result += 32;
            }
            if (value >= 10**16) {
                value /= 10**16;
                result += 16;
            }
            if (value >= 10**8) {
                value /= 10**8;
                result += 8;
            }
            if (value >= 10**4) {
                value /= 10**4;
                result += 4;
            }
            if (value >= 10**2) {
                value /= 10**2;
                result += 2;
            }
            if (value >= 10**1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

import {OperatorFilterer} from "./OperatorFilterer.sol";

/**
 * @title  DefaultOperatorFilterer
 * @notice Inherits from OperatorFilterer and automatically subscribes to the default OpenSea subscription.
 */
abstract contract DefaultOperatorFilterer is OperatorFilterer {
    address constant DEFAULT_SUBSCRIPTION = address(0x3cc6CddA760b79bAfa08dF41ECFA224f810dCeB6);

    constructor() OperatorFilterer(DEFAULT_SUBSCRIPTION, true) {}
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

interface IOperatorFilterRegistry {
    function isOperatorAllowed(address registrant, address operator) external view returns (bool);
    function register(address registrant) external;
    function registerAndSubscribe(address registrant, address subscription) external;
    function registerAndCopyEntries(address registrant, address registrantToCopy) external;
    function unregister(address addr) external;
    function updateOperator(address registrant, address operator, bool filtered) external;
    function updateOperators(address registrant, address[] calldata operators, bool filtered) external;
    function updateCodeHash(address registrant, bytes32 codehash, bool filtered) external;
    function updateCodeHashes(address registrant, bytes32[] calldata codeHashes, bool filtered) external;
    function subscribe(address registrant, address registrantToSubscribe) external;
    function unsubscribe(address registrant, bool copyExistingEntries) external;
    function subscriptionOf(address addr) external returns (address registrant);
    function subscribers(address registrant) external returns (address[] memory);
    function subscriberAt(address registrant, uint256 index) external returns (address);
    function copyEntriesOf(address registrant, address registrantToCopy) external;
    function isOperatorFiltered(address registrant, address operator) external returns (bool);
    function isCodeHashOfFiltered(address registrant, address operatorWithCode) external returns (bool);
    function isCodeHashFiltered(address registrant, bytes32 codeHash) external returns (bool);
    function filteredOperators(address addr) external returns (address[] memory);
    function filteredCodeHashes(address addr) external returns (bytes32[] memory);
    function filteredOperatorAt(address registrant, uint256 index) external returns (address);
    function filteredCodeHashAt(address registrant, uint256 index) external returns (bytes32);
    function isRegistered(address addr) external returns (bool);
    function codeHashOf(address addr) external returns (bytes32);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

import {IOperatorFilterRegistry} from "./IOperatorFilterRegistry.sol";

/**
 * @title  OperatorFilterer
 * @notice Abstract contract whose constructor automatically registers and optionally subscribes to or copies another
 *         registrant's entries in the OperatorFilterRegistry.
 * @dev    This smart contract is meant to be inherited by token contracts so they can use the following:
 *         - `onlyAllowedOperator` modifier for `transferFrom` and `safeTransferFrom` methods.
 *         - `onlyAllowedOperatorApproval` modifier for `approve` and `setApprovalForAll` methods.
 */
abstract contract OperatorFilterer {
    error OperatorNotAllowed(address operator);

    IOperatorFilterRegistry public constant OPERATOR_FILTER_REGISTRY =
        IOperatorFilterRegistry(0x000000000000AAeB6D7670E522A718067333cd4E);

    constructor(address subscriptionOrRegistrantToCopy, bool subscribe) {
        // If an inheriting token contract is deployed to a network without the registry deployed, the modifier
        // will not revert, but the contract will need to be registered with the registry once it is deployed in
        // order for the modifier to filter addresses.
        if (address(OPERATOR_FILTER_REGISTRY).code.length > 0) {
            if (subscribe) {
                OPERATOR_FILTER_REGISTRY.registerAndSubscribe(address(this), subscriptionOrRegistrantToCopy);
            } else {
                if (subscriptionOrRegistrantToCopy != address(0)) {
                    OPERATOR_FILTER_REGISTRY.registerAndCopyEntries(address(this), subscriptionOrRegistrantToCopy);
                } else {
                    OPERATOR_FILTER_REGISTRY.register(address(this));
                }
            }
        }
    }

    modifier onlyAllowedOperator(address from) virtual {
        // Allow spending tokens from addresses with balance
        // Note that this still allows listings and marketplaces with escrow to transfer tokens if transferred
        // from an EOA.
        if (from != msg.sender) {
            _checkFilterOperator(msg.sender);
        }
        _;
    }

    modifier onlyAllowedOperatorApproval(address operator) virtual {
        _checkFilterOperator(operator);
        _;
    }

    function _checkFilterOperator(address operator) internal view virtual {
        // Check registry code length to facilitate testing in environments without a deployed registry.
        if (address(OPERATOR_FILTER_REGISTRY).code.length > 0) {
            if (!OPERATOR_FILTER_REGISTRY.isOperatorAllowed(address(this), operator)) {
                revert OperatorNotAllowed(operator);
            }
        }
    }
}

{
  "remappings": [
    "@api3/=lib/airnode/packages/",
    "@openzeppelin/=lib/openzeppelin-contracts/",
    "@projectopensea/operator-filter-registry/=lib/operator-filter-registry/",
    "@solmate/=lib/solmate/src/",
    "airnode/=lib/airnode/",
    "chiru-labs/=lib/chiru-labs/",
    "ds-test/=lib/solmate/lib/ds-test/src/",
    "erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
    "forge-std/=lib/forge-std/src/",
    "openzeppelin-contracts-upgradeable/=lib/operator-filter-registry/lib/openzeppelin-contracts-upgradeable/contracts/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/contracts/",
    "operator-filter-registry/=lib/operator-filter-registry/src/",
    "prb-test/=lib/prb-test/src/",
    "solmate/=lib/solmate/src/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "london",
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"ForwardFailed","type":"error"},{"inputs":[],"name":"InsufficientFunds","type":"error"},{"inputs":[],"name":"InvalidNumberOfPendingsUsedForClaim","type":"error"},{"inputs":[],"name":"InvalidNumberOfTransactionsToBeBurned","type":"error"},{"inputs":[],"name":"MathError","type":"error"},{"inputs":[],"name":"MaxSupplyReached","type":"error"},{"inputs":[],"name":"MaxSupplyWillBeReached","type":"error"},{"inputs":[],"name":"MintIsClosed","type":"error"},{"inputs":[],"name":"NotTokenOwner","type":"error"},{"inputs":[{"internalType":"address","name":"operator","type":"address"}],"name":"OperatorNotAllowed","type":"error"},{"inputs":[],"name":"PendingsTokenAlreadyUsedForClaim","type":"error"},{"inputs":[],"name":"PublicConditionsNotMet","type":"error"},{"inputs":[],"name":"QueryForNonexistentToken","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"approved","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":false,"internalType":"bool","name":"approved","type":"bool"}],"name":"ApprovalForAll","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Transfer","type":"event"},{"stateMutability":"payable","type":"fallback"},{"inputs":[],"name":"OPERATOR_FILTER_REGISTRY","outputs":[{"internalType":"contract IOperatorFilterRegistry","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"amountMinted","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"operator","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"approve","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256[]","name":"_transactionIds","type":"uint256[]"}],"name":"burnToClaim","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"burnTransactionsMintIsOpen","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"burnedTransactionCount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"deadAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"getApproved","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getBurnedTransactionCount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getTotalMintedSoFar","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"holderAmountMinted","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"operator","type":"address"}],"name":"isApprovedForAll","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"mintLimitPerTxnAndWallet","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"mintPrice","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"mintPublic","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"mintedByAddress","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"ownerOf","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"paymentSplitterAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pendingsAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256[]","name":"_pendingsIds","type":"uint256[]"}],"name":"pendingsHolderClaim","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"pendingsHolderClaimIsOpen","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"pendingsIdUsedForClaim","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pendingsRequiredForClaim","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"publicAmountMinted","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"publicMintIsOpen","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"reduceMaxSupply","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"reservedForHoldersAmount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"operator","type":"address"},{"internalType":"bool","name":"approved","type":"bool"}],"name":"setApprovalForAll","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"string","name":"_uri","type":"string"}],"name":"setBaseURI","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bool","name":"_burnTransactionsMintIsOpen","type":"bool"}],"name":"setBurnTransactionsMintIsOpen","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pendingsRequiredForClaim","type":"uint256"},{"internalType":"uint256","name":"_transactionsToBurnForFreeToken","type":"uint256"}],"name":"setHolderClaimAmounts","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_mintLimitPerTxnAndWallet","type":"uint256"}],"name":"setMaxMintsPerWallet","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_mintPrice","type":"uint256"}],"name":"setMintPrice","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_transactionsToBurnForFreeToken","type":"uint256"}],"name":"setNumberOfTransactionsToBurn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address payable","name":"_paymentSplitterAddress","type":"address"}],"name":"setPaymentSplitterAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_pendingsAddress","type":"address"}],"name":"setPendingsAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bool","name":"_pendingsHolderClaimIsOpen","type":"bool"}],"name":"setPendingsHolderClaimIsOpen","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bool","name":"_publicMintIsOpen","type":"bool"}],"name":"setPublicMintIsOpen","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_transactionsAddress","type":"address"}],"name":"setTransactionsAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_reservedForHoldersAmount","type":"uint256"}],"name":"setreservedForHoldersAmount","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"toggleDeadAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"tokenURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"transactionsAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"transactionsToBurnForFreeToken","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"transferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"uri","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_to","type":"address"},{"internalType":"address","name":"_token","type":"address"}],"name":"withdrawERC20FromContract","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"withdrawEthFromContract","outputs":[],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]

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