Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.19; 

import {BeefyBridgeAdapter} from "../BeefyBridgeAdapter.sol";
import {IERC20} from "@openzeppelin-4/contracts/token/ERC20/ERC20.sol";
import {IERC20Permit} from "@openzeppelin-4/contracts/token/ERC20/extensions/ERC20Permit.sol";
import {SafeERC20} from "@openzeppelin-4/contracts/token/ERC20/utils/SafeERC20.sol";
import {IXERC20} from  "../../interfaces/IXERC20.sol";
import {IXERC20Lockbox} from "../../interfaces/IXERC20Lockbox.sol";
import {IAxelarGateway} from "@axelar-network/axelar-gmp-sdk-solidity/contracts/interfaces/IAxelarGateway.sol";
import {IAxelarGasService} from "@axelar-network/axelar-gmp-sdk-solidity/contracts/interfaces/IAxelarGasService.sol";
import {StringToAddress} from "@axelar-network/axelar-gmp-sdk-solidity/contracts/libs/AddressString.sol";
import {AddressToString} from "@axelar-network/axelar-gmp-sdk-solidity/contracts/libs/AddressString.sol";

// Axelar Token Bridge adapter for XERC20 tokens
contract AxelarBridge is BeefyBridgeAdapter {
    using SafeERC20 for IERC20;
    using StringToAddress for string;
    using AddressToString for address;
    
    IAxelarGateway public gateway;
    IAxelarGasService public gasService;

    // Chain id to axelar id mapping.
    mapping (uint256 => string) public chainIdToAxelarId;
    mapping (string => uint256) public axelarIdToChainId;

    // Errors
    error InvalidChainId();
    error NotApprovedByGateway();
    error WrongSourceAddress();

    /**@notice Initialize the bridge
     * @param _bifi BIFI token address
     * @param _xbifi xBIFI token address
     * @param _lockbox xBIFI lockbox address
     */
    function initialize(
        IERC20 _bifi,
        IXERC20 _xbifi, 
        IXERC20Lockbox _lockbox,
        address[] calldata _contracts
    ) public override initializer {
        __Ownable_init();
        BIFI = _bifi;
        xBIFI = _xbifi;
        lockbox = _lockbox;
        gateway = IAxelarGateway(_contracts[0]);
        gasService = IAxelarGasService(_contracts[1]);

        if (address(lockbox) != address(0)) {
            BIFI.safeApprove(address(lockbox), type(uint).max);
            IERC20(address(xBIFI)).safeApprove(address(lockbox), type(uint).max);
        }
    }

    function _bridge(address _user, uint256 _dstChainId, uint256 _amount, address _to) internal override {
        if (abi.encode(chainIdToAxelarId[_dstChainId]).length == 0) revert InvalidChainId();

        _bridgeOut(_user, _amount);

        // Send message to receiving bridge to mint tokens to user. 
        bytes memory payload = abi.encode(_to, _amount);
 
        // Pay for our transaction on the other chain.
        gasService.payNativeGasForContractCall{value: msg.value}(
            address(this),
            chainIdToAxelarId[_dstChainId],
            address(this).toString(),
            payload,
            _user
        );

        // Send message to receiving bridge to mint tokens to user.
        gateway.callContract(
            chainIdToAxelarId[_dstChainId],
            address(this).toString(),
            payload
        );

        emit BridgedOut(_dstChainId, _user, _to, _amount);
    }

    // Add a new chain id to the mapping. 
    function addChainIds(uint256[] calldata _chainIds, string[] calldata _axelarIds) external onlyOwner {
        for (uint i; i < _chainIds.length; ++i) {
            chainIdToAxelarId[_chainIds[i]] = _axelarIds[i];
            axelarIdToChainId[_axelarIds[i]] = _chainIds[i];
        }
    }

    // Execute a bridge in.
    function execute(
        bytes32 commandId,
        string calldata sourceChain,
        string calldata sourceAddress,
        bytes calldata payload
    ) external {
        if (axelarIdToChainId[sourceChain] == 0) revert InvalidChainId();
        if (sourceAddress.toAddress() != address(this)) revert WrongSourceAddress();
        
        bytes32 payloadHash = keccak256(payload);
        if (!gateway.validateContractCall(commandId, sourceChain, sourceAddress, payloadHash)) revert NotApprovedByGateway();
       
        (address user, uint256 amount) = abi.decode(payload, (address,uint256));

        _bridgeIn(axelarIdToChainId[sourceChain], user, amount);    
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import { IUpgradable } from '../interfaces/IUpgradable.sol';

/**
 * @title IAxelarGasService Interface
 * @notice This is an interface for the AxelarGasService contract which manages gas payments
 * and refunds for cross-chain communication on the Axelar network.
 * @dev This interface inherits IUpgradable
 */
interface IAxelarGasService is IUpgradable {
    error NothingReceived();
    error InvalidAddress();
    error NotCollector();
    error InvalidAmounts();

    event GasPaidForContractCall(
        address indexed sourceAddress,
        string destinationChain,
        string destinationAddress,
        bytes32 indexed payloadHash,
        address gasToken,
        uint256 gasFeeAmount,
        address refundAddress
    );

    event GasPaidForContractCallWithToken(
        address indexed sourceAddress,
        string destinationChain,
        string destinationAddress,
        bytes32 indexed payloadHash,
        string symbol,
        uint256 amount,
        address gasToken,
        uint256 gasFeeAmount,
        address refundAddress
    );

    event NativeGasPaidForContractCall(
        address indexed sourceAddress,
        string destinationChain,
        string destinationAddress,
        bytes32 indexed payloadHash,
        uint256 gasFeeAmount,
        address refundAddress
    );

    event NativeGasPaidForContractCallWithToken(
        address indexed sourceAddress,
        string destinationChain,
        string destinationAddress,
        bytes32 indexed payloadHash,
        string symbol,
        uint256 amount,
        uint256 gasFeeAmount,
        address refundAddress
    );

    event GasPaidForExpressCall(
        address indexed sourceAddress,
        string destinationChain,
        string destinationAddress,
        bytes32 indexed payloadHash,
        address gasToken,
        uint256 gasFeeAmount,
        address refundAddress
    );

    event GasPaidForExpressCallWithToken(
        address indexed sourceAddress,
        string destinationChain,
        string destinationAddress,
        bytes32 indexed payloadHash,
        string symbol,
        uint256 amount,
        address gasToken,
        uint256 gasFeeAmount,
        address refundAddress
    );

    event NativeGasPaidForExpressCall(
        address indexed sourceAddress,
        string destinationChain,
        string destinationAddress,
        bytes32 indexed payloadHash,
        uint256 gasFeeAmount,
        address refundAddress
    );

    event NativeGasPaidForExpressCallWithToken(
        address indexed sourceAddress,
        string destinationChain,
        string destinationAddress,
        bytes32 indexed payloadHash,
        string symbol,
        uint256 amount,
        uint256 gasFeeAmount,
        address refundAddress
    );

    event GasAdded(
        bytes32 indexed txHash,
        uint256 indexed logIndex,
        address gasToken,
        uint256 gasFeeAmount,
        address refundAddress
    );

    event NativeGasAdded(bytes32 indexed txHash, uint256 indexed logIndex, uint256 gasFeeAmount, address refundAddress);

    event ExpressGasAdded(
        bytes32 indexed txHash,
        uint256 indexed logIndex,
        address gasToken,
        uint256 gasFeeAmount,
        address refundAddress
    );

    event NativeExpressGasAdded(
        bytes32 indexed txHash,
        uint256 indexed logIndex,
        uint256 gasFeeAmount,
        address refundAddress
    );

    event Refunded(
        bytes32 indexed txHash,
        uint256 indexed logIndex,
        address payable receiver,
        address token,
        uint256 amount
    );

    /**
     * @notice Pay for gas using ERC20 tokens for a contract call on a destination chain.
     * @dev This function is called on the source chain before calling the gateway to execute a remote contract.
     * @param sender The address making the payment
     * @param destinationChain The target chain where the contract call will be made
     * @param destinationAddress The target address on the destination chain
     * @param payload Data payload for the contract call
     * @param gasToken The address of the ERC20 token used to pay for gas
     * @param gasFeeAmount The amount of tokens to pay for gas
     * @param refundAddress The address where refunds, if any, should be sent
     */
    function payGasForContractCall(
        address sender,
        string calldata destinationChain,
        string calldata destinationAddress,
        bytes calldata payload,
        address gasToken,
        uint256 gasFeeAmount,
        address refundAddress
    ) external;

    /**
     * @notice Pay for gas using ERC20 tokens for a contract call with tokens on a destination chain.
     * @dev This function is called on the source chain before calling the gateway to execute a remote contract.
     * @param sender The address making the payment
     * @param destinationChain The target chain where the contract call with tokens will be made
     * @param destinationAddress The target address on the destination chain
     * @param payload Data payload for the contract call with tokens
     * @param symbol The symbol of the token to be sent with the call
     * @param amount The amount of tokens to be sent with the call
     * @param gasToken The address of the ERC20 token used to pay for gas
     * @param gasFeeAmount The amount of tokens to pay for gas
     * @param refundAddress The address where refunds, if any, should be sent
     */
    function payGasForContractCallWithToken(
        address sender,
        string calldata destinationChain,
        string calldata destinationAddress,
        bytes calldata payload,
        string calldata symbol,
        uint256 amount,
        address gasToken,
        uint256 gasFeeAmount,
        address refundAddress
    ) external;

    /**
     * @notice Pay for gas using native currency for a contract call on a destination chain.
     * @dev This function is called on the source chain before calling the gateway to execute a remote contract.
     * @param sender The address making the payment
     * @param destinationChain The target chain where the contract call will be made
     * @param destinationAddress The target address on the destination chain
     * @param payload Data payload for the contract call
     * @param refundAddress The address where refunds, if any, should be sent
     */
    function payNativeGasForContractCall(
        address sender,
        string calldata destinationChain,
        string calldata destinationAddress,
        bytes calldata payload,
        address refundAddress
    ) external payable;

    /**
     * @notice Pay for gas using native currency for a contract call with tokens on a destination chain.
     * @dev This function is called on the source chain before calling the gateway to execute a remote contract.
     * @param sender The address making the payment
     * @param destinationChain The target chain where the contract call with tokens will be made
     * @param destinationAddress The target address on the destination chain
     * @param payload Data payload for the contract call with tokens
     * @param symbol The symbol of the token to be sent with the call
     * @param amount The amount of tokens to be sent with the call
     * @param refundAddress The address where refunds, if any, should be sent
     */
    function payNativeGasForContractCallWithToken(
        address sender,
        string calldata destinationChain,
        string calldata destinationAddress,
        bytes calldata payload,
        string calldata symbol,
        uint256 amount,
        address refundAddress
    ) external payable;

    /**
     * @notice Pay for gas using ERC20 tokens for an express contract call on a destination chain.
     * @dev This function is called on the source chain before calling the gateway to express execute a remote contract.
     * @param sender The address making the payment
     * @param destinationChain The target chain where the contract call will be made
     * @param destinationAddress The target address on the destination chain
     * @param payload Data payload for the contract call
     * @param gasToken The address of the ERC20 token used to pay for gas
     * @param gasFeeAmount The amount of tokens to pay for gas
     * @param refundAddress The address where refunds, if any, should be sent
     */
    function payGasForExpressCall(
        address sender,
        string calldata destinationChain,
        string calldata destinationAddress,
        bytes calldata payload,
        address gasToken,
        uint256 gasFeeAmount,
        address refundAddress
    ) external;

    /**
     * @notice Pay for gas using ERC20 tokens for an express contract call with tokens on a destination chain.
     * @dev This function is called on the source chain before calling the gateway to express execute a remote contract.
     * @param sender The address making the payment
     * @param destinationChain The target chain where the contract call with tokens will be made
     * @param destinationAddress The target address on the destination chain
     * @param payload Data payload for the contract call with tokens
     * @param symbol The symbol of the token to be sent with the call
     * @param amount The amount of tokens to be sent with the call
     * @param gasToken The address of the ERC20 token used to pay for gas
     * @param gasFeeAmount The amount of tokens to pay for gas
     * @param refundAddress The address where refunds, if any, should be sent
     */
    function payGasForExpressCallWithToken(
        address sender,
        string calldata destinationChain,
        string calldata destinationAddress,
        bytes calldata payload,
        string calldata symbol,
        uint256 amount,
        address gasToken,
        uint256 gasFeeAmount,
        address refundAddress
    ) external;

    /**
     * @notice Pay for gas using native currency for an express contract call on a destination chain.
     * @dev This function is called on the source chain before calling the gateway to express execute a remote contract.
     * @param sender The address making the payment
     * @param destinationChain The target chain where the contract call will be made
     * @param destinationAddress The target address on the destination chain
     * @param payload Data payload for the contract call
     * @param refundAddress The address where refunds, if any, should be sent
     */
    function payNativeGasForExpressCall(
        address sender,
        string calldata destinationChain,
        string calldata destinationAddress,
        bytes calldata payload,
        address refundAddress
    ) external payable;

    /**
     * @notice Pay for gas using native currency for an express contract call with tokens on a destination chain.
     * @dev This function is called on the source chain before calling the gateway to express execute a remote contract.
     * @param sender The address making the payment
     * @param destinationChain The target chain where the contract call with tokens will be made
     * @param destinationAddress The target address on the destination chain
     * @param payload Data payload for the contract call with tokens
     * @param symbol The symbol of the token to be sent with the call
     * @param amount The amount of tokens to be sent with the call
     * @param refundAddress The address where refunds, if any, should be sent
     */
    function payNativeGasForExpressCallWithToken(
        address sender,
        string calldata destinationChain,
        string calldata destinationAddress,
        bytes calldata payload,
        string calldata symbol,
        uint256 amount,
        address refundAddress
    ) external payable;

    /**
     * @notice Add additional gas payment using ERC20 tokens after initiating a cross-chain call.
     * @dev This function can be called on the source chain after calling the gateway to execute a remote contract.
     * @param txHash The transaction hash of the cross-chain call
     * @param logIndex The log index for the cross-chain call
     * @param gasToken The ERC20 token address used to add gas
     * @param gasFeeAmount The amount of tokens to add as gas
     * @param refundAddress The address where refunds, if any, should be sent
     */
    function addGas(
        bytes32 txHash,
        uint256 logIndex,
        address gasToken,
        uint256 gasFeeAmount,
        address refundAddress
    ) external;

    /**
     * @notice Add additional gas payment using native currency after initiating a cross-chain call.
     * @dev This function can be called on the source chain after calling the gateway to execute a remote contract.
     * @param txHash The transaction hash of the cross-chain call
     * @param logIndex The log index for the cross-chain call
     * @param refundAddress The address where refunds, if any, should be sent
     */
    function addNativeGas(
        bytes32 txHash,
        uint256 logIndex,
        address refundAddress
    ) external payable;

    /**
     * @notice Add additional gas payment using ERC20 tokens after initiating an express cross-chain call.
     * @dev This function can be called on the source chain after calling the gateway to express execute a remote contract.
     * @param txHash The transaction hash of the cross-chain call
     * @param logIndex The log index for the cross-chain call
     * @param gasToken The ERC20 token address used to add gas
     * @param gasFeeAmount The amount of tokens to add as gas
     * @param refundAddress The address where refunds, if any, should be sent
     */
    function addExpressGas(
        bytes32 txHash,
        uint256 logIndex,
        address gasToken,
        uint256 gasFeeAmount,
        address refundAddress
    ) external;

    /**
     * @notice Add additional gas payment using native currency after initiating an express cross-chain call.
     * @dev This function can be called on the source chain after calling the gateway to express execute a remote contract.
     * @param txHash The transaction hash of the cross-chain call
     * @param logIndex The log index for the cross-chain call
     * @param refundAddress The address where refunds, if any, should be sent
     */
    function addNativeExpressGas(
        bytes32 txHash,
        uint256 logIndex,
        address refundAddress
    ) external payable;

    /**
     * @notice Allows the gasCollector to collect accumulated fees from the contract.
     * @dev Use address(0) as the token address for native currency.
     * @param receiver The address to receive the collected fees
     * @param tokens Array of token addresses to be collected
     * @param amounts Array of amounts to be collected for each respective token address
     */
    function collectFees(
        address payable receiver,
        address[] calldata tokens,
        uint256[] calldata amounts
    ) external;

    /**
     * @notice Refunds gas payment to the receiver in relation to a specific cross-chain transaction.
     * @dev Only callable by the gasCollector.
     * @dev Use address(0) as the token address to refund native currency.
     * @param txHash The transaction hash of the cross-chain call
     * @param logIndex The log index for the cross-chain call
     * @param receiver The address to receive the refund
     * @param token The token address to be refunded
     * @param amount The amount to refund
     */
    function refund(
        bytes32 txHash,
        uint256 logIndex,
        address payable receiver,
        address token,
        uint256 amount
    ) external;

    /**
     * @notice Returns the address of the designated gas collector.
     * @return address of the gas collector
     */
    function gasCollector() external returns (address);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import { IGovernable } from './IGovernable.sol';

interface IAxelarGateway is IGovernable {
    /**********\
    |* Errors *|
    \**********/

    error NotSelf();
    error NotProxy();
    error InvalidCodeHash();
    error SetupFailed();
    error InvalidAuthModule();
    error InvalidTokenDeployer();
    error InvalidAmount();
    error InvalidChainId();
    error InvalidCommands();
    error TokenDoesNotExist(string symbol);
    error TokenAlreadyExists(string symbol);
    error TokenDeployFailed(string symbol);
    error TokenContractDoesNotExist(address token);
    error BurnFailed(string symbol);
    error MintFailed(string symbol);
    error InvalidSetMintLimitsParams();
    error ExceedMintLimit(string symbol);

    /**********\
    |* Events *|
    \**********/

    event TokenSent(
        address indexed sender,
        string destinationChain,
        string destinationAddress,
        string symbol,
        uint256 amount
    );

    event ContractCall(
        address indexed sender,
        string destinationChain,
        string destinationContractAddress,
        bytes32 indexed payloadHash,
        bytes payload
    );

    event ContractCallWithToken(
        address indexed sender,
        string destinationChain,
        string destinationContractAddress,
        bytes32 indexed payloadHash,
        bytes payload,
        string symbol,
        uint256 amount
    );

    event Executed(bytes32 indexed commandId);

    event TokenDeployed(string symbol, address tokenAddresses);

    event ContractCallApproved(
        bytes32 indexed commandId,
        string sourceChain,
        string sourceAddress,
        address indexed contractAddress,
        bytes32 indexed payloadHash,
        bytes32 sourceTxHash,
        uint256 sourceEventIndex
    );

    event ContractCallApprovedWithMint(
        bytes32 indexed commandId,
        string sourceChain,
        string sourceAddress,
        address indexed contractAddress,
        bytes32 indexed payloadHash,
        string symbol,
        uint256 amount,
        bytes32 sourceTxHash,
        uint256 sourceEventIndex
    );

    event TokenMintLimitUpdated(string symbol, uint256 limit);

    event OperatorshipTransferred(bytes newOperatorsData);

    event Upgraded(address indexed implementation);

    /********************\
    |* Public Functions *|
    \********************/

    function sendToken(
        string calldata destinationChain,
        string calldata destinationAddress,
        string calldata symbol,
        uint256 amount
    ) external;

    function callContract(
        string calldata destinationChain,
        string calldata contractAddress,
        bytes calldata payload
    ) external;

    function callContractWithToken(
        string calldata destinationChain,
        string calldata contractAddress,
        bytes calldata payload,
        string calldata symbol,
        uint256 amount
    ) external;

    function isContractCallApproved(
        bytes32 commandId,
        string calldata sourceChain,
        string calldata sourceAddress,
        address contractAddress,
        bytes32 payloadHash
    ) external view returns (bool);

    function isContractCallAndMintApproved(
        bytes32 commandId,
        string calldata sourceChain,
        string calldata sourceAddress,
        address contractAddress,
        bytes32 payloadHash,
        string calldata symbol,
        uint256 amount
    ) external view returns (bool);

    function validateContractCall(
        bytes32 commandId,
        string calldata sourceChain,
        string calldata sourceAddress,
        bytes32 payloadHash
    ) external returns (bool);

    function validateContractCallAndMint(
        bytes32 commandId,
        string calldata sourceChain,
        string calldata sourceAddress,
        bytes32 payloadHash,
        string calldata symbol,
        uint256 amount
    ) external returns (bool);

    /***********\
    |* Getters *|
    \***********/

    function authModule() external view returns (address);

    function tokenDeployer() external view returns (address);

    function tokenMintLimit(string memory symbol) external view returns (uint256);

    function tokenMintAmount(string memory symbol) external view returns (uint256);

    function allTokensFrozen() external view returns (bool);

    function implementation() external view returns (address);

    function tokenAddresses(string memory symbol) external view returns (address);

    function tokenFrozen(string memory symbol) external view returns (bool);

    function isCommandExecuted(bytes32 commandId) external view returns (bool);

    function adminEpoch() external view returns (uint256);

    function adminThreshold(uint256 epoch) external view returns (uint256);

    function admins(uint256 epoch) external view returns (address[] memory);

    /*******************\
    |* Admin Functions *|
    \*******************/

    function setTokenMintLimits(string[] calldata symbols, uint256[] calldata limits) external;

    function upgrade(
        address newImplementation,
        bytes32 newImplementationCodeHash,
        bytes calldata setupParams
    ) external;

    /**********************\
    |* External Functions *|
    \**********************/

    function setup(bytes calldata params) external;

    function execute(bytes calldata input) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

// General interface for upgradable contracts
interface IContractIdentifier {
    /**
     * @notice Returns the contract ID. It can be used as a check during upgrades.
     * @dev Meant to be overridden in derived contracts.
     * @return bytes32 The contract ID
     */
    function contractId() external pure returns (bytes32);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @title IGovernable Interface
 * @notice This is an interface used by the AxelarGateway contract to manage governance and mint limiter roles.
 */
interface IGovernable {
    error NotGovernance();
    error NotMintLimiter();
    error InvalidGovernance();
    error InvalidMintLimiter();

    event GovernanceTransferred(address indexed previousGovernance, address indexed newGovernance);
    event MintLimiterTransferred(address indexed previousGovernance, address indexed newGovernance);

    /**
     * @notice Returns the governance address.
     * @return address of the governance
     */
    function governance() external view returns (address);

    /**
     * @notice Returns the mint limiter address.
     * @return address of the mint limiter
     */
    function mintLimiter() external view returns (address);

    /**
     * @notice Transfer the governance role to another address.
     * @param newGovernance The new governance address
     */
    function transferGovernance(address newGovernance) external;

    /**
     * @notice Transfer the mint limiter role to another address.
     * @param newGovernance The new mint limiter address
     */
    function transferMintLimiter(address newGovernance) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @title IOwnable Interface
 * @notice IOwnable is an interface that abstracts the implementation of a
 * contract with ownership control features. It's commonly used in upgradable
 * contracts and includes the functionality to get current owner, transfer
 * ownership, and propose and accept ownership.
 */
interface IOwnable {
    error NotOwner();
    error InvalidOwner();
    error InvalidOwnerAddress();

    event OwnershipTransferStarted(address indexed newOwner);
    event OwnershipTransferred(address indexed newOwner);

    /**
     * @notice Returns the current owner of the contract.
     * @return address The address of the current owner
     */
    function owner() external view returns (address);

    /**
     * @notice Returns the address of the pending owner of the contract.
     * @return address The address of the pending owner
     */
    function pendingOwner() external view returns (address);

    /**
     * @notice Transfers ownership of the contract to a new address
     * @param newOwner The address to transfer ownership to
     */
    function transferOwnership(address newOwner) external;

    /**
     * @notice Proposes to transfer the contract's ownership to a new address.
     * The new owner needs to accept the ownership explicitly.
     * @param newOwner The address to transfer ownership to
     */
    function proposeOwnership(address newOwner) external;

    /**
     * @notice Transfers ownership to the pending owner.
     * @dev Can only be called by the pending owner
     */
    function acceptOwnership() external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import { IOwnable } from './IOwnable.sol';
import { IContractIdentifier } from './IContractIdentifier.sol';

// General interface for upgradable contracts
interface IUpgradable is IOwnable, IContractIdentifier {
    error InvalidCodeHash();
    error InvalidImplementation();
    error SetupFailed();
    error NotProxy();

    event Upgraded(address indexed newImplementation);

    function implementation() external view returns (address);

    function upgrade(
        address newImplementation,
        bytes32 newImplementationCodeHash,
        bytes calldata params
    ) external;

    function setup(bytes calldata data) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

library StringToAddress {
    error InvalidAddressString();

    function toAddress(string memory addressString) internal pure returns (address) {
        bytes memory stringBytes = bytes(addressString);
        uint160 addressNumber = 0;
        uint8 stringByte;

        if (stringBytes.length != 42 || stringBytes[0] != '0' || stringBytes[1] != 'x') revert InvalidAddressString();

        for (uint256 i = 2; i < 42; ++i) {
            stringByte = uint8(stringBytes[i]);

            if ((stringByte >= 97) && (stringByte <= 102)) stringByte -= 87;
            else if ((stringByte >= 65) && (stringByte <= 70)) stringByte -= 55;
            else if ((stringByte >= 48) && (stringByte <= 57)) stringByte -= 48;
            else revert InvalidAddressString();

            addressNumber |= uint160(uint256(stringByte) << ((41 - i) << 2));
        }

        return address(addressNumber);
    }
}

library AddressToString {
    function toString(address address_) internal pure returns (string memory) {
        bytes memory addressBytes = abi.encodePacked(address_);
        bytes memory characters = '0123456789abcdef';
        bytes memory stringBytes = new bytes(42);

        stringBytes[0] = '0';
        stringBytes[1] = 'x';

        for (uint256 i; i < 20; ++i) {
            stringBytes[2 + i * 2] = characters[uint8(addressBytes[i] >> 4)];
            stringBytes[3 + i * 2] = characters[uint8(addressBytes[i] & 0x0f)];
        }

        return string(stringBytes);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC5267.sol)

pragma solidity ^0.8.0;

interface IERC5267 {
    /**
     * @dev MAY be emitted to signal that the domain could have changed.
     */
    event EIP712DomainChanged();

    /**
     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712
     * signature.
     */
    function eip712Domain()
        external
        view
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        );
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(address from, address to, uint256 amount) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 amount) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/ERC20Permit.sol)

pragma solidity ^0.8.0;

import "./IERC20Permit.sol";
import "../ERC20.sol";
import "../../../utils/cryptography/ECDSA.sol";
import "../../../utils/cryptography/EIP712.sol";
import "../../../utils/Counters.sol";

/**
 * @dev Implementation of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * _Available since v3.4._
 */
abstract contract ERC20Permit is ERC20, IERC20Permit, EIP712 {
    using Counters for Counters.Counter;

    mapping(address => Counters.Counter) private _nonces;

    // solhint-disable-next-line var-name-mixedcase
    bytes32 private constant _PERMIT_TYPEHASH =
        keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
    /**
     * @dev In previous versions `_PERMIT_TYPEHASH` was declared as `immutable`.
     * However, to ensure consistency with the upgradeable transpiler, we will continue
     * to reserve a slot.
     * @custom:oz-renamed-from _PERMIT_TYPEHASH
     */
    // solhint-disable-next-line var-name-mixedcase
    bytes32 private _PERMIT_TYPEHASH_DEPRECATED_SLOT;

    /**
     * @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `"1"`.
     *
     * It's a good idea to use the same `name` that is defined as the ERC20 token name.
     */
    constructor(string memory name) EIP712(name, "1") {}

    /**
     * @dev See {IERC20Permit-permit}.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual override {
        require(block.timestamp <= deadline, "ERC20Permit: expired deadline");

        bytes32 structHash = keccak256(abi.encode(_PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));

        bytes32 hash = _hashTypedDataV4(structHash);

        address signer = ECDSA.recover(hash, v, r, s);
        require(signer == owner, "ERC20Permit: invalid signature");

        _approve(owner, spender, value);
    }

    /**
     * @dev See {IERC20Permit-nonces}.
     */
    function nonces(address owner) public view virtual override returns (uint256) {
        return _nonces[owner].current();
    }

    /**
     * @dev See {IERC20Permit-DOMAIN_SEPARATOR}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view override returns (bytes32) {
        return _domainSeparatorV4();
    }

    /**
     * @dev "Consume a nonce": return the current value and increment.
     *
     * _Available since v4.1._
     */
    function _useNonce(address owner) internal virtual returns (uint256 current) {
        Counters.Counter storage nonce = _nonces[owner];
        current = nonce.current();
        nonce.increment();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Compatible with tokens that require the approval to be set to
     * 0 before setting it to a non-zero value.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
     * Revert on invalid signature.
     */
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return
            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)

pragma solidity ^0.8.0;

/**
 * @title Counters
 * @author Matt Condon (@shrugs)
 * @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
 * of elements in a mapping, issuing ERC721 ids, or counting request ids.
 *
 * Include with `using Counters for Counters.Counter;`
 */
library Counters {
    struct Counter {
        // This variable should never be directly accessed by users of the library: interactions must be restricted to
        // the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
        // this feature: see https://github.com/ethereum/solidity/issues/4637
        uint256 _value; // default: 0
    }

    function current(Counter storage counter) internal view returns (uint256) {
        return counter._value;
    }

    function increment(Counter storage counter) internal {
        unchecked {
            counter._value += 1;
        }
    }

    function decrement(Counter storage counter) internal {
        uint256 value = counter._value;
        require(value > 0, "Counter: decrement overflow");
        unchecked {
            counter._value = value - 1;
        }
    }

    function reset(Counter storage counter) internal {
        counter._value = 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.0;

import "../Strings.sol";

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS,
        InvalidSignatureV // Deprecated in v4.8
    }

    function _throwError(RecoverError error) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert("ECDSA: invalid signature");
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert("ECDSA: invalid signature length");
        } else if (error == RecoverError.InvalidSignatureS) {
            revert("ECDSA: invalid signature 's' value");
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature` or error string. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength);
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, signature);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError) {
        bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
        uint8 v = uint8((uint256(vs) >> 255) + 27);
        return tryRecover(hash, v, r, s);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     *
     * _Available since v4.2._
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, r, vs);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address, RecoverError) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature);
        }

        return (signer, RecoverError.NoError);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from a `hash`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32 message) {
        // 32 is the length in bytes of hash,
        // enforced by the type signature above
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, "\x19Ethereum Signed Message:\n32")
            mstore(0x1c, hash)
            message := keccak256(0x00, 0x3c)
        }
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from `s`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
    }

    /**
     * @dev Returns an Ethereum Signed Typed Data, created from a
     * `domainSeparator` and a `structHash`. This produces hash corresponding
     * to the one signed with the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
     * JSON-RPC method as part of EIP-712.
     *
     * See {recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 data) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, "\x19\x01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            data := keccak256(ptr, 0x42)
        }
    }

    /**
     * @dev Returns an Ethereum Signed Data with intended validator, created from a
     * `validator` and `data` according to the version 0 of EIP-191.
     *
     * See {recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19\x00", validator, data));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/cryptography/EIP712.sol)

pragma solidity ^0.8.8;

import "./ECDSA.sol";
import "../ShortStrings.sol";
import "../../interfaces/IERC5267.sol";

/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
 * thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
 * they need in their contracts using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * NOTE: In the upgradeable version of this contract, the cached values will correspond to the address, and the domain
 * separator of the implementation contract. This will cause the `_domainSeparatorV4` function to always rebuild the
 * separator from the immutable values, which is cheaper than accessing a cached version in cold storage.
 *
 * _Available since v3.4._
 *
 * @custom:oz-upgrades-unsafe-allow state-variable-immutable state-variable-assignment
 */
abstract contract EIP712 is IERC5267 {
    using ShortStrings for *;

    bytes32 private constant _TYPE_HASH =
        keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");

    // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
    // invalidate the cached domain separator if the chain id changes.
    bytes32 private immutable _cachedDomainSeparator;
    uint256 private immutable _cachedChainId;
    address private immutable _cachedThis;

    bytes32 private immutable _hashedName;
    bytes32 private immutable _hashedVersion;

    ShortString private immutable _name;
    ShortString private immutable _version;
    string private _nameFallback;
    string private _versionFallback;

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    constructor(string memory name, string memory version) {
        _name = name.toShortStringWithFallback(_nameFallback);
        _version = version.toShortStringWithFallback(_versionFallback);
        _hashedName = keccak256(bytes(name));
        _hashedVersion = keccak256(bytes(version));

        _cachedChainId = block.chainid;
        _cachedDomainSeparator = _buildDomainSeparator();
        _cachedThis = address(this);
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        if (address(this) == _cachedThis && block.chainid == _cachedChainId) {
            return _cachedDomainSeparator;
        } else {
            return _buildDomainSeparator();
        }
    }

    function _buildDomainSeparator() private view returns (bytes32) {
        return keccak256(abi.encode(_TYPE_HASH, _hashedName, _hashedVersion, block.chainid, address(this)));
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return ECDSA.toTypedDataHash(_domainSeparatorV4(), structHash);
    }

    /**
     * @dev See {EIP-5267}.
     *
     * _Available since v4.9._
     */
    function eip712Domain()
        public
        view
        virtual
        override
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        )
    {
        return (
            hex"0f", // 01111
            _name.toStringWithFallback(_nameFallback),
            _version.toStringWithFallback(_versionFallback),
            block.chainid,
            address(this),
            bytes32(0),
            new uint256[](0)
        );
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1, "Math: mulDiv overflow");

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/ShortStrings.sol)

pragma solidity ^0.8.8;

import "./StorageSlot.sol";

// | string  | 0xAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA   |
// | length  | 0x                                                              BB |
type ShortString is bytes32;

/**
 * @dev This library provides functions to convert short memory strings
 * into a `ShortString` type that can be used as an immutable variable.
 *
 * Strings of arbitrary length can be optimized using this library if
 * they are short enough (up to 31 bytes) by packing them with their
 * length (1 byte) in a single EVM word (32 bytes). Additionally, a
 * fallback mechanism can be used for every other case.
 *
 * Usage example:
 *
 * ```solidity
 * contract Named {
 *     using ShortStrings for *;
 *
 *     ShortString private immutable _name;
 *     string private _nameFallback;
 *
 *     constructor(string memory contractName) {
 *         _name = contractName.toShortStringWithFallback(_nameFallback);
 *     }
 *
 *     function name() external view returns (string memory) {
 *         return _name.toStringWithFallback(_nameFallback);
 *     }
 * }
 * ```
 */
library ShortStrings {
    // Used as an identifier for strings longer than 31 bytes.
    bytes32 private constant _FALLBACK_SENTINEL = 0x00000000000000000000000000000000000000000000000000000000000000FF;

    error StringTooLong(string str);
    error InvalidShortString();

    /**
     * @dev Encode a string of at most 31 chars into a `ShortString`.
     *
     * This will trigger a `StringTooLong` error is the input string is too long.
     */
    function toShortString(string memory str) internal pure returns (ShortString) {
        bytes memory bstr = bytes(str);
        if (bstr.length > 31) {
            revert StringTooLong(str);
        }
        return ShortString.wrap(bytes32(uint256(bytes32(bstr)) | bstr.length));
    }

    /**
     * @dev Decode a `ShortString` back to a "normal" string.
     */
    function toString(ShortString sstr) internal pure returns (string memory) {
        uint256 len = byteLength(sstr);
        // using `new string(len)` would work locally but is not memory safe.
        string memory str = new string(32);
        /// @solidity memory-safe-assembly
        assembly {
            mstore(str, len)
            mstore(add(str, 0x20), sstr)
        }
        return str;
    }

    /**
     * @dev Return the length of a `ShortString`.
     */
    function byteLength(ShortString sstr) internal pure returns (uint256) {
        uint256 result = uint256(ShortString.unwrap(sstr)) & 0xFF;
        if (result > 31) {
            revert InvalidShortString();
        }
        return result;
    }

    /**
     * @dev Encode a string into a `ShortString`, or write it to storage if it is too long.
     */
    function toShortStringWithFallback(string memory value, string storage store) internal returns (ShortString) {
        if (bytes(value).length < 32) {
            return toShortString(value);
        } else {
            StorageSlot.getStringSlot(store).value = value;
            return ShortString.wrap(_FALLBACK_SENTINEL);
        }
    }

    /**
     * @dev Decode a string that was encoded to `ShortString` or written to storage using {setWithFallback}.
     */
    function toStringWithFallback(ShortString value, string storage store) internal pure returns (string memory) {
        if (ShortString.unwrap(value) != _FALLBACK_SENTINEL) {
            return toString(value);
        } else {
            return store;
        }
    }

    /**
     * @dev Return the length of a string that was encoded to `ShortString` or written to storage using {setWithFallback}.
     *
     * WARNING: This will return the "byte length" of the string. This may not reflect the actual length in terms of
     * actual characters as the UTF-8 encoding of a single character can span over multiple bytes.
     */
    function byteLengthWithFallback(ShortString value, string storage store) internal view returns (uint256) {
        if (ShortString.unwrap(value) != _FALLBACK_SENTINEL) {
            return byteLength(value);
        } else {
            return bytes(store).length;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/StorageSlot.sol)
// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.

pragma solidity ^0.8.0;

/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```solidity
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * _Available since v4.1 for `address`, `bool`, `bytes32`, `uint256`._
 * _Available since v4.9 for `string`, `bytes`._
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }

    struct BooleanSlot {
        bool value;
    }

    struct Bytes32Slot {
        bytes32 value;
    }

    struct Uint256Slot {
        uint256 value;
    }

    struct StringSlot {
        string value;
    }

    struct BytesSlot {
        bytes value;
    }

    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` with member `value` located at `slot`.
     */
    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.
     */
    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` with member `value` located at `slot`.
     */
    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
     */
    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

import "./math/Math.sol";
import "./math/SignedMath.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toString(int256 value) internal pure returns (string memory) {
        return string(abi.encodePacked(value < 0 ? "-" : "", toString(SignedMath.abs(value))));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return keccak256(bytes(a)) == keccak256(bytes(b));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    function __Ownable_init() internal onlyInitializing {
        __Ownable_init_unchained();
    }

    function __Ownable_init_unchained() internal onlyInitializing {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.2;

import "../../utils/AddressUpgradeable.sol";

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```solidity
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 *
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a
     * constructor.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: setting the version to 255 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized != type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }

    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint8) {
        return _initialized;
    }

    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _initializing;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }

    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.19; 

import {IERC20} from "@openzeppelin-4/contracts/token/ERC20/ERC20.sol";
import {IERC20Permit} from "@openzeppelin-4/contracts/token/ERC20/extensions/ERC20Permit.sol";
import {SafeERC20} from "@openzeppelin-4/contracts/token/ERC20/utils/SafeERC20.sol";
import {OwnableUpgradeable} from "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import {IXERC20} from "../interfaces/IXERC20.sol";
import {IXERC20Lockbox} from "../interfaces/IXERC20Lockbox.sol";

// Beefy Bridge Adapter Base
contract BeefyBridgeAdapter is OwnableUpgradeable {
    using SafeERC20 for IERC20;
    
    // Addresses needed
    IERC20 public BIFI;
    IXERC20 public xBIFI;
    IXERC20Lockbox public lockbox;
    uint256 private nonce;

    struct Error {
        uint256 chainId;
        address user; 
        uint256 amount;
    }

    // Map Error events for retry. 
    mapping (uint256 => Error) public errors;

    // Events
    event BridgedOut(uint256 indexed dstChainId, address indexed bridgeUser, address indexed tokenReceiver, uint256 amount);
    event BridgedIn(uint256 indexed srcChainId, address indexed tokenReceiver, uint256 amount);
    event BridgeError(uint256 indexed errorId, address indexed user, uint256 amount, uint256 timestamp);

    error NoErrorFound();

    /**@notice Initialize the bridge
     * @param _bifi BIFI token address
     * @param _xbifi xBIFI token address
     * @param _lockbox xBIFI lockbox address
     */
    function initialize(
        IERC20 _bifi,
        IXERC20 _xbifi, 
        IXERC20Lockbox _lockbox,
        address[] calldata 
    ) public virtual initializer {
        __Ownable_init();
        BIFI = _bifi;
        xBIFI = _xbifi;
        lockbox = _lockbox;

        if (address(lockbox) != address(0)) {
            BIFI.safeApprove(address(lockbox), type(uint).max);
            IERC20(address(xBIFI)).safeApprove(address(lockbox), type(uint).max);
        }
    }

    /**@notice Bridge Out Funds
     * @param _dstChainId Destination chain id 
     * @param _amount Amount of BIFI to bridge out
     * @param _to Address to receive funds on destination chain
     */
    function bridge(uint256 _dstChainId, uint256 _amount, address _to) external virtual payable {
        _bridge(msg.sender, _dstChainId, _amount, _to);
    }

    function _bridge(address _user, uint256 _dstChainId, uint256 _amount, address _to) internal virtual {
        
        _bridgeOut(_user, _amount);

        emit BridgedOut(_dstChainId, _user, _to, _amount);
    }

    function _bridgeOut(address _user, uint256 _amount) internal virtual {
        // Lock BIFI in lockbox and burn minted tokens. 
        if (address(lockbox) != address(0)) {
            BIFI.safeTransferFrom(_user, address(this), _amount);
            lockbox.deposit(_amount);
            xBIFI.burn(address(this), _amount);
        } else xBIFI.burn(_user, _amount);
    }

    function _bridgeIn(uint256 _chainId, address _user, uint256 _amount) internal virtual {
        try xBIFI.mint(address(this), _amount) {
            if (address(lockbox) != address(0)) {
                lockbox.withdraw(_amount);
                BIFI.safeTransfer(_user, _amount);
            } else IERC20(address(xBIFI)).safeTransfer(_user, _amount); 
            emit BridgedIn(_chainId, _user, _amount);  
        } catch {
            uint256 _nonce = nonce;
            errors[_nonce] = Error(_chainId, _user, _amount);
            nonce++;
            emit BridgeError(_nonce, _user, _amount, block.timestamp);
        }
    }

   /**@notice Retry a failed bridge in
    * @param _errorId Id of error to retry
    */
    function retry(uint256 _errorId) external {
        Error memory _error = errors[_errorId];
        delete errors[_errorId];

        if (_error.user == address(0)) revert NoErrorFound();

        _bridgeIn(_error.chainId, _error.user, _error.amount);
    }

    /**@notice Estimate bridge cost
     * @param _dstChainId Destination chain id
     * @param _amount Amount of BIFI to bridge out
     * @param _to Address to receive funds on destination chain
     */
    function bridgeCost(uint256 _dstChainId, uint256 _amount, address _to) external virtual view returns (uint256 gasCost) {
        _dstChainId; _amount; _to;
        return 0;
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.8.4 <0.9.0;

interface IXERC20 {
  /**
   * @notice Emits when a lockbox is set
   *
   * @param _lockbox The address of the lockbox
   */

  event LockboxSet(address _lockbox);

  /**
   * @notice Emits when a limit is set
   *
   * @param _mintingLimit The updated minting limit we are setting to the bridge
   * @param _burningLimit The updated burning limit we are setting to the bridge
   * @param _bridge The address of the bridge we are setting the limit too
   */
  event BridgeLimitsSet(uint256 _mintingLimit, uint256 _burningLimit, address indexed _bridge);

  /**
   * @notice Reverts when a user with too low of a limit tries to call mint/burn
   */

  error IXERC20_NotHighEnoughLimits();

  /**
   * @notice Reverts when caller is not the factory
   */

  error IXERC20_NotFactory();

  struct Bridge {
    BridgeParameters minterParams;
    BridgeParameters burnerParams;
  }

  struct BridgeParameters {
    uint256 timestamp;
    uint256 ratePerSecond;
    uint256 maxLimit;
    uint256 currentLimit;
  }

  /**
   * @notice Sets the lockbox address
   *
   * @param _lockbox The address of the lockbox
   */

  function setLockbox(address _lockbox) external;

  /**
   * @notice Updates the limits of any bridge
   * @dev Can only be called by the owner
   * @param _mintingLimit The updated minting limit we are setting to the bridge
   * @param _burningLimit The updated burning limit we are setting to the bridge
   * @param _bridge The address of the bridge we are setting the limits too
   */
  function setLimits(address _bridge, uint256 _mintingLimit, uint256 _burningLimit) external;

  /**
   * @notice Returns the max limit of a minter
   *
   * @param _minter The minter we are viewing the limits of
   *  @return _limit The limit the minter has
   */
  function mintingMaxLimitOf(address _minter) external view returns (uint256 _limit);

  /**
   * @notice Returns the max limit of a bridge
   *
   * @param _bridge the bridge we are viewing the limits of
   * @return _limit The limit the bridge has
   */

  function burningMaxLimitOf(address _bridge) external view returns (uint256 _limit);

  /**
   * @notice Returns the current limit of a minter
   *
   * @param _minter The minter we are viewing the limits of
   * @return _limit The limit the minter has
   */

  function mintingCurrentLimitOf(address _minter) external view returns (uint256 _limit);

  /**
   * @notice Returns the current limit of a bridge
   *
   * @param _bridge the bridge we are viewing the limits of
   * @return _limit The limit the bridge has
   */

  function burningCurrentLimitOf(address _bridge) external view returns (uint256 _limit);

  /**
   * @notice Mints tokens for a user
   * @dev Can only be called by a minter
   * @param _user The address of the user who needs tokens minted
   * @param _amount The amount of tokens being minted
   */

  function mint(address _user, uint256 _amount) external;

  /**
   * @notice Burns tokens for a user
   * @dev Can only be called by a minter
   * @param _user The address of the user who needs tokens burned
   * @param _amount The amount of tokens being burned
   */

  function burn(address _user, uint256 _amount) external;
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity >=0.8.4 <0.9.0;

interface IXERC20Lockbox {
  /**
   * @notice Emitted when tokens are deposited into the lockbox
   */

  event Deposit(address _sender, uint256 _amount);

  /**
   * @notice Emitted when tokens are withdrawn from the lockbox
   */

  event Withdraw(address _sender, uint256 _amount);

  /**
   * @notice Reverts when a user tries to deposit native tokens on a non-native lockbox
   */

  error IXERC20Lockbox_NotNative();

  /**
   * @notice Reverts when a user tries to deposit non-native tokens on a native lockbox
   */

  error IXERC20Lockbox_Native();

  /**
   * @notice Reverts when a user tries to withdraw and the call fails
   */

  error IXERC20Lockbox_WithdrawFailed();

  /**
   * @notice Deposit ERC20 tokens into the lockbox
   *
   * @param _amount The amount of tokens to deposit
   */

  function deposit(uint256 _amount) external;

  /**
   * @notice Deposit ERC20 tokens into the lockbox, and send the XERC20 to a user
   *
   * @param _user The user to send the XERC20 to
   * @param _amount The amount of tokens to deposit
   */

  function depositTo(address _user, uint256 _amount) external;

  /**
   * @notice Deposit the native asset into the lockbox, and send the XERC20 to a user
   *
   * @param _user The user to send the XERC20 to
   */

  function depositNativeTo(address _user) external payable;

  /**
   * @notice Withdraw ERC20 tokens from the lockbox
   *
   * @param _amount The amount of tokens to withdraw
   */

  function withdraw(uint256 _amount) external;

  /**
   * @notice Withdraw ERC20 tokens from the lockbox
   *
   * @param _user The user to withdraw to
   * @param _amount The amount of tokens to withdraw
   */

  function withdrawTo(address _user, uint256 _amount) external;
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "remappings": [
    "ds-test/=lib/forge-std/lib/ds-test/src/",
    "lib/forge-std:ds-test/=lib/forge-std/lib/ds-test/src/"
  ],
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"name":"InvalidAddressString","type":"error"},{"inputs":[],"name":"InvalidChainId","type":"error"},{"inputs":[],"name":"NoErrorFound","type":"error"},{"inputs":[],"name":"NotApprovedByGateway","type":"error"},{"inputs":[],"name":"WrongSourceAddress","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"errorId","type":"uint256"},{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"timestamp","type":"uint256"}],"name":"BridgeError","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"srcChainId","type":"uint256"},{"indexed":true,"internalType":"address","name":"tokenReceiver","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"BridgedIn","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"dstChainId","type":"uint256"},{"indexed":true,"internalType":"address","name":"bridgeUser","type":"address"},{"indexed":true,"internalType":"address","name":"tokenReceiver","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"BridgedOut","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint8","name":"version","type":"uint8"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"inputs":[],"name":"BIFI","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256[]","name":"_chainIds","type":"uint256[]"},{"internalType":"string[]","name":"_axelarIds","type":"string[]"}],"name":"addChainIds","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"string","name":"","type":"string"}],"name":"axelarIdToChainId","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_dstChainId","type":"uint256"},{"internalType":"uint256","name":"_amount","type":"uint256"},{"internalType":"address","name":"_to","type":"address"}],"name":"bridge","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_dstChainId","type":"uint256"},{"internalType":"uint256","name":"_amount","type":"uint256"},{"internalType":"address","name":"_to","type":"address"}],"name":"bridgeCost","outputs":[{"internalType":"uint256","name":"gasCost","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"chainIdToAxelarId","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"errors","outputs":[{"internalType":"uint256","name":"chainId","type":"uint256"},{"internalType":"address","name":"user","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"commandId","type":"bytes32"},{"internalType":"string","name":"sourceChain","type":"string"},{"internalType":"string","name":"sourceAddress","type":"string"},{"internalType":"bytes","name":"payload","type":"bytes"}],"name":"execute","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"gasService","outputs":[{"internalType":"contract IAxelarGasService","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"gateway","outputs":[{"internalType":"contract IAxelarGateway","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"_bifi","type":"address"},{"internalType":"contract IXERC20","name":"_xbifi","type":"address"},{"internalType":"contract IXERC20Lockbox","name":"_lockbox","type":"address"},{"internalType":"address[]","name":"_contracts","type":"address[]"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"lockbox","outputs":[{"internalType":"contract IXERC20Lockbox","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_errorId","type":"uint256"}],"name":"retry","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"xBIFI","outputs":[{"internalType":"contract IXERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"}]

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