Contract

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "./Logarithm.sol";
import "./TransferHelper.sol";

// This is common token interface, get balance of owner's token by ERC20/ERC721/ERC1155.
interface ICommonToken {
    function balanceOf(address owner) external returns(uint256);
}

// This contract is extended from ERC20
contract Inscription is ERC20 {
    using Logarithm for int256;
    uint256 public cap;                 // Max amount
    uint256 public limitPerMint;        // Limitaion of each mint
    uint256 public inscriptionId;       // Inscription Id
    uint256 public maxMintSize;         // max mint size, that means the max mint quantity is: maxMintSize * limitPerMint
    uint256 public freezeTime;          // The frozen time (interval) between two mints is a fixed number of seconds. You can mint, but you will need to pay an additional mint fee, and this fee will be double for each mint.
    address public onlyContractAddress; // Only addresses that hold these assets can mint
    uint256 public onlyMinQuantity;     // Only addresses that the quantity of assets hold more than this amount can mint
    uint256 public baseFee;             // base fee of the second mint after frozen interval. The first mint after frozen time is free.
    uint256 public fundingCommission;   // commission rate of fund raising, 100 means 1%
    uint256 public crowdFundingRate;    // rate of crowdfunding
    address payable public crowdfundingAddress; // receiving fee of crowdfunding
    address payable public inscriptionFactory;

    mapping(address => uint256) public lastMintTimestamp;   // record the last mint timestamp of account
    mapping(address => uint256) public lastMintFee;           // record the last mint fee

    constructor(
        string memory _name,            // token name
        string memory _tick,            // token tick, same as symbol. must be 4 characters.
        uint256 _cap,                   // Max amount
        uint256 _limitPerMint,          // Limitaion of each mint
        uint256 _inscriptionId,         // Inscription Id
        uint256 _maxMintSize,           // max mint size, that means the max mint quantity is: maxMintSize * limitPerMint. This is only availabe for non-frozen time token.
        uint256 _freezeTime,            // The frozen time (interval) between two mints is a fixed number of seconds. You can mint, but you will need to pay an additional mint fee, and this fee will be double for each mint.
        address _onlyContractAddress,   // Only addresses that hold these assets can mint
        uint256 _onlyMinQuantity,       // Only addresses that the quantity of assets hold more than this amount can mint
        uint256 _baseFee,               // base fee of the second mint after frozen interval. The first mint after frozen time is free.
        uint256 _fundingCommission,     // commission rate of fund raising, 100 means 1%
        uint256 _crowdFundingRate,      // rate of crowdfunding
        address payable _crowdFundingAddress,   // receiving fee of crowdfunding
        address payable _inscriptionFactory
    ) ERC20(_name, _tick) {
        require(_cap >= _limitPerMint, "Limit per mint exceed cap");
        cap = _cap;
        limitPerMint = _limitPerMint;
        inscriptionId = _inscriptionId;
        maxMintSize = _maxMintSize;
        freezeTime = _freezeTime;
        onlyContractAddress = _onlyContractAddress;
        onlyMinQuantity = _onlyMinQuantity;
        baseFee = _baseFee;
        fundingCommission = _fundingCommission;
        crowdFundingRate = _crowdFundingRate;
        crowdfundingAddress = _crowdFundingAddress;
        inscriptionFactory = _inscriptionFactory;
    }

    function mint(address _to) payable public {
        // Check if the quantity after mint will exceed the cap
        require(totalSupply() + limitPerMint <= cap, "Touched cap");
        // Check if the assets in the msg.sender is satisfied
        require(onlyContractAddress == address(0x0) || ICommonToken(onlyContractAddress).balanceOf(msg.sender) >= onlyMinQuantity, "You don't have required assets");

        if(lastMintTimestamp[msg.sender] + freezeTime > block.timestamp) {
            // The min extra tip is double of last mint fee
            lastMintFee[msg.sender] = lastMintFee[msg.sender] == 0 ? baseFee : lastMintFee[msg.sender] * 2;
            // Transfer the fee to the crowdfunding address
            if(crowdFundingRate > 0) {
                // Check if the tip is high than the min extra fee
                require(msg.value >= crowdFundingRate + lastMintFee[msg.sender], "Send some ETH as fee and crowdfunding");
                _dispatchFunding(crowdFundingRate);
            }
            // Transfer the tip to InscriptionFactory smart contract
            if(msg.value - crowdFundingRate > 0) TransferHelper.safeTransferETH(inscriptionFactory, msg.value - crowdFundingRate);
        } else {
            // Transfer the fee to the crowdfunding address
            if(crowdFundingRate > 0) {
                require(msg.value >= crowdFundingRate, "Send some ETH as crowdfunding");
                _dispatchFunding(msg.value);
            }
            // Out of frozen time, free mint. Reset the timestamp and mint times.
            lastMintFee[msg.sender] = 0;
            lastMintTimestamp[msg.sender] = block.timestamp;
        }
        // Do mint
        _mint(_to, limitPerMint);
    }

    // batch mint is only available for non-frozen-time tokens
    function batchMint(address _to, uint256 _num) payable public {
        require(_num <= maxMintSize, "exceed max mint size");
        require(totalSupply() + _num * limitPerMint <= cap, "Touch cap");
        require(freezeTime == 0, "Batch mint only for non-frozen token");
        require(onlyContractAddress == address(0x0) || ICommonToken(onlyContractAddress).balanceOf(msg.sender) >= onlyMinQuantity, "You don't have required assets");
        if(crowdFundingRate > 0) {
            require(msg.value >= crowdFundingRate * _num, "Crowdfunding ETH not enough");
            _dispatchFunding(msg.value);
        }
        for(uint256 i = 0; i < _num; i++) _mint(_to, limitPerMint);
    }

    function getMintFee(address _addr) public view returns(uint256 mintedTimes, uint256 nextMintFee) {
        if(lastMintTimestamp[_addr] + freezeTime > block.timestamp) {
            int256 scale = 1e18;
            int256 halfScale = 5e17;
            // times = log_2(lastMintFee / baseFee) + 1 (if lastMintFee > 0)
            nextMintFee = lastMintFee[_addr] == 0 ? baseFee : lastMintFee[_addr] * 2;
            mintedTimes = uint256((Logarithm.log2(int256(nextMintFee / baseFee) * scale, scale, halfScale) + 1) / scale) + 1;
        }
    }

    function _dispatchFunding(uint256 _amount) private {
        uint256 commission = _amount * fundingCommission / 10000;
        TransferHelper.safeTransferETH(crowdfundingAddress, _amount - commission);
        if(commission > 0) TransferHelper.safeTransferETH(inscriptionFactory, commission);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(address from, address to, uint256 amount) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 amount) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

library Logarithm {
    /// @notice Finds the zero-based index of the first one in the binary representation of x.
    /// @dev See the note on msb in the "Find First Set" Wikipedia article https://en.wikipedia.org/wiki/Find_first_set
    /// @param x The uint256 number for which to find the index of the most significant bit.
    /// @return msb The index of the most significant bit as an uint256.
    function mostSignificantBit(uint256 x) internal pure returns (uint256 msb) {
        if (x >= 2**128) {
            x >>= 128;
            msb += 128;
        }
        if (x >= 2**64) {
            x >>= 64;
            msb += 64;
        }
        if (x >= 2**32) {
            x >>= 32;
            msb += 32;
        }
        if (x >= 2**16) {
            x >>= 16;
            msb += 16;
        }
        if (x >= 2**8) {
            x >>= 8;
            msb += 8;
        }
        if (x >= 2**4) {
            x >>= 4;
            msb += 4;
        }
        if (x >= 2**2) {
            x >>= 2;
            msb += 2;
        }
        if (x >= 2**1) {
            // No need to shift x any more.
            msb += 1;
        }
    }
    /// @notice Calculates the binary logarithm of x.
    ///
    /// @dev Based on the iterative approximation algorithm.
    /// https://en.wikipedia.org/wiki/Binary_logarithm#Iterative_approximation
    ///
    /// Requirements:
    /// - x must be greater than zero.
    ///
    /// Caveats:
    /// - The results are nor perfectly accurate to the last digit, due to the lossy precision of the iterative approximation.
    ///
    /// @param x The signed 59.18-decimal fixed-point number for which to calculate the binary logarithm.
    /// @return result The binary logarithm as a signed 59.18-decimal fixed-point number.
    function log2(int256 x, int256 scale, int256 halfScale) internal pure returns (int256 result) {
        require(x > 0);
        unchecked {
            // This works because log2(x) = -log2(1/x).
            int256 sign;
            if (x >= scale) {
                sign = 1;
            } else {
                sign = -1;
                // Do the fixed-point inversion inline to save gas. The numerator is SCALE * SCALE.
                assembly {
                    x := div(1000000000000000000000000000000000000, x)
                }
            }

            // Calculate the integer part of the logarithm and add it to the result and finally calculate y = x * 2^(-n).
            uint256 n = mostSignificantBit(uint256(x / scale));

            // The integer part of the logarithm as a signed 59.18-decimal fixed-point number. The operation can't overflow
            // because n is maximum 255, SCALE is 1e18 and sign is either 1 or -1.
            result = int256(n) * scale;

            // This is y = x * 2^(-n).
            int256 y = x >> n;

            // If y = 1, the fractional part is zero.
            if (y == scale) {
                return result * sign;
            }

            // Calculate the fractional part via the iterative approximation.
            // The "delta >>= 1" part is equivalent to "delta /= 2", but shifting bits is faster.
            for (int256 delta = int256(halfScale); delta > 0; delta >>= 1) {
                y = (y * y) / scale;

                // Is y^2 > 2 and so in the range [2,4)?
                if (y >= 2 * scale) {
                    // Add the 2^(-m) factor to the logarithm.
                    result += delta;

                    // Corresponds to z/2 on Wikipedia.
                    y >>= 1;
                }
            }
            result *= sign;
        }
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later

pragma solidity >=0.6.0;

// helper methods for interacting with ERC20 tokens and sending ETH that do not consistently return true/false
library TransferHelper {
    function safeApprove(
        address token,
        address to,
        uint256 value
    ) internal {
        // bytes4(keccak256(bytes('approve(address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0x095ea7b3, to, value));
        require(
            success && (data.length == 0 || abi.decode(data, (bool))),
            'TransferHelper::safeApprove: approve failed'
        );
    }

    function safeTransfer(
        address token,
        address to,
        uint256 value
    ) internal {
        // bytes4(keccak256(bytes('transfer(address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0xa9059cbb, to, value));
        require(
            success && (data.length == 0 || abi.decode(data, (bool))),
            'TransferHelper::safeTransfer: transfer failed'
        );
    }

    function safeTransferFrom(
        address token,
        address from,
        address to,
        uint256 value
    ) internal {
        // bytes4(keccak256(bytes('transferFrom(address,address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0x23b872dd, from, to, value));
        require(
            success && (data.length == 0 || abi.decode(data, (bool))),
            'TransferHelper::transferFrom: transferFrom failed'
        );
    }

    function safeTransferETH(address to, uint256 value) internal {
        (bool success, ) = to.call{value: value}(new bytes(0));
        require(success, 'TransferHelper::safeTransferETH: ETH transfer failed');
    }
}

{
  "viaIR": true,
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"string","name":"_name","type":"string"},{"internalType":"string","name":"_tick","type":"string"},{"internalType":"uint256","name":"_cap","type":"uint256"},{"internalType":"uint256","name":"_limitPerMint","type":"uint256"},{"internalType":"uint256","name":"_inscriptionId","type":"uint256"},{"internalType":"uint256","name":"_maxMintSize","type":"uint256"},{"internalType":"uint256","name":"_freezeTime","type":"uint256"},{"internalType":"address","name":"_onlyContractAddress","type":"address"},{"internalType":"uint256","name":"_onlyMinQuantity","type":"uint256"},{"internalType":"uint256","name":"_baseFee","type":"uint256"},{"internalType":"uint256","name":"_fundingCommission","type":"uint256"},{"internalType":"uint256","name":"_crowdFundingRate","type":"uint256"},{"internalType":"address payable","name":"_crowdFundingAddress","type":"address"},{"internalType":"address payable","name":"_inscriptionFactory","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"baseFee","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_num","type":"uint256"}],"name":"batchMint","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"cap","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"crowdFundingRate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"crowdfundingAddress","outputs":[{"internalType":"address payable","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"subtractedValue","type":"uint256"}],"name":"decreaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"freezeTime","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"fundingCommission","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_addr","type":"address"}],"name":"getMintFee","outputs":[{"internalType":"uint256","name":"mintedTimes","type":"uint256"},{"internalType":"uint256","name":"nextMintFee","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"addedValue","type":"uint256"}],"name":"increaseAllowance","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"inscriptionFactory","outputs":[{"internalType":"address payable","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"inscriptionId","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"lastMintFee","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"lastMintTimestamp","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"limitPerMint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"maxMintSize","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_to","type":"address"}],"name":"mint","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"onlyContractAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"onlyMinQuantity","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"}]

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