/**
 *Submitted for verification at Etherscan.io on 2019-04-11
*/

// File: openzeppelin-solidity/contracts/math/SafeMath.sol

pragma solidity ^0.5.0;

/**
 * @title SafeMath
 * @dev Unsigned math operations with safety checks that revert on error
 */
library SafeMath {
    /**
    * @dev Multiplies two unsigned integers, reverts on overflow.
    */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b);

        return c;
    }

    /**
    * @dev Integer division of two unsigned integers truncating the quotient, reverts on division by zero.
    */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
    * @dev Subtracts two unsigned integers, reverts on overflow (i.e. if subtrahend is greater than minuend).
    */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a);
        uint256 c = a - b;

        return c;
    }

    /**
    * @dev Adds two unsigned integers, reverts on overflow.
    */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a);

        return c;
    }

    /**
    * @dev Divides two unsigned integers and returns the remainder (unsigned integer modulo),
    * reverts when dividing by zero.
    */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b != 0);
        return a % b;
    }
}

// File: openzeppelin-solidity/contracts/ownership/Ownable.sol

pragma solidity ^0.5.0;

/**
 * @title Ownable
 * @dev The Ownable contract has an owner address, and provides basic authorization control
 * functions, this simplifies the implementation of "user permissions".
 */
contract Ownable {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev The Ownable constructor sets the original `owner` of the contract to the sender
     * account.
     */
    constructor () internal {
        _owner = msg.sender;
        emit OwnershipTransferred(address(0), _owner);
    }

    /**
     * @return the address of the owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(isOwner());
        _;
    }

    /**
     * @return true if `msg.sender` is the owner of the contract.
     */
    function isOwner() public view returns (bool) {
        return msg.sender == _owner;
    }

    /**
     * @dev Allows the current owner to relinquish control of the contract.
     * @notice Renouncing to ownership will leave the contract without an owner.
     * It will not be possible to call the functions with the `onlyOwner`
     * modifier anymore.
     */
    function renounceOwnership() public onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Allows the current owner to transfer control of the contract to a newOwner.
     * @param newOwner The address to transfer ownership to.
     */
    function transferOwnership(address newOwner) public onlyOwner {
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers control of the contract to a newOwner.
     * @param newOwner The address to transfer ownership to.
     */
    function _transferOwnership(address newOwner) internal {
        require(newOwner != address(0));
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// File: @daostack/infra/contracts/Reputation.sol

pragma solidity ^0.5.4;



/**
 * @title Reputation system
 * @dev A DAO has Reputation System which allows peers to rate other peers in order to build trust .
 * A reputation is use to assign influence measure to a DAO'S peers.
 * Reputation is similar to regular tokens but with one crucial difference: It is non-transferable.
 * The Reputation contract maintain a map of address to reputation value.
 * It provides an onlyOwner functions to mint and burn reputation _to (or _from) a specific address.
 */

contract Reputation is Ownable {

    uint8 public decimals = 18;             //Number of decimals of the smallest unit
    // Event indicating minting of reputation to an address.
    event Mint(address indexed _to, uint256 _amount);
    // Event indicating burning of reputation for an address.
    event Burn(address indexed _from, uint256 _amount);

      /// @dev `Checkpoint` is the structure that attaches a block number to a
      ///  given value, the block number attached is the one that last changed the
      ///  value
    struct Checkpoint {

    // `fromBlock` is the block number that the value was generated from
        uint128 fromBlock;

          // `value` is the amount of reputation at a specific block number
        uint128 value;
    }

      // `balances` is the map that tracks the balance of each address, in this
      //  contract when the balance changes the block number that the change
      //  occurred is also included in the map
    mapping (address => Checkpoint[]) balances;

      // Tracks the history of the `totalSupply` of the reputation
    Checkpoint[] totalSupplyHistory;

    /// @notice Constructor to create a Reputation
    constructor(
    ) public
    {
    }

    /// @dev This function makes it easy to get the total number of reputation
    /// @return The total number of reputation
    function totalSupply() public view returns (uint256) {
        return totalSupplyAt(block.number);
    }

  ////////////////
  // Query balance and totalSupply in History
  ////////////////
    /**
    * @dev return the reputation amount of a given owner
    * @param _owner an address of the owner which we want to get his reputation
    */
    function balanceOf(address _owner) public view returns (uint256 balance) {
        return balanceOfAt(_owner, block.number);
    }

      /// @dev Queries the balance of `_owner` at a specific `_blockNumber`
      /// @param _owner The address from which the balance will be retrieved
      /// @param _blockNumber The block number when the balance is queried
      /// @return The balance at `_blockNumber`
    function balanceOfAt(address _owner, uint256 _blockNumber)
    public view returns (uint256)
    {
        if ((balances[_owner].length == 0) || (balances[_owner][0].fromBlock > _blockNumber)) {
            return 0;
          // This will return the expected balance during normal situations
        } else {
            return getValueAt(balances[_owner], _blockNumber);
        }
    }

      /// @notice Total amount of reputation at a specific `_blockNumber`.
      /// @param _blockNumber The block number when the totalSupply is queried
      /// @return The total amount of reputation at `_blockNumber`
    function totalSupplyAt(uint256 _blockNumber) public view returns(uint256) {
        if ((totalSupplyHistory.length == 0) || (totalSupplyHistory[0].fromBlock > _blockNumber)) {
            return 0;
          // This will return the expected totalSupply during normal situations
        } else {
            return getValueAt(totalSupplyHistory, _blockNumber);
        }
    }

      /// @notice Generates `_amount` reputation that are assigned to `_owner`
      /// @param _user The address that will be assigned the new reputation
      /// @param _amount The quantity of reputation generated
      /// @return True if the reputation are generated correctly
    function mint(address _user, uint256 _amount) public onlyOwner returns (bool) {
        uint256 curTotalSupply = totalSupply();
        require(curTotalSupply + _amount >= curTotalSupply); // Check for overflow
        uint256 previousBalanceTo = balanceOf(_user);
        require(previousBalanceTo + _amount >= previousBalanceTo); // Check for overflow
        updateValueAtNow(totalSupplyHistory, curTotalSupply + _amount);
        updateValueAtNow(balances[_user], previousBalanceTo + _amount);
        emit Mint(_user, _amount);
        return true;
    }

      /// @notice Burns `_amount` reputation from `_owner`
      /// @param _user The address that will lose the reputation
      /// @param _amount The quantity of reputation to burn
      /// @return True if the reputation are burned correctly
    function burn(address _user, uint256 _amount) public onlyOwner returns (bool) {
        uint256 curTotalSupply = totalSupply();
        uint256 amountBurned = _amount;
        uint256 previousBalanceFrom = balanceOf(_user);
        if (previousBalanceFrom < amountBurned) {
            amountBurned = previousBalanceFrom;
        }
        updateValueAtNow(totalSupplyHistory, curTotalSupply - amountBurned);
        updateValueAtNow(balances[_user], previousBalanceFrom - amountBurned);
        emit Burn(_user, amountBurned);
        return true;
    }

  ////////////////
  // Internal helper functions to query and set a value in a snapshot array
  ////////////////

      /// @dev `getValueAt` retrieves the number of reputation at a given block number
      /// @param checkpoints The history of values being queried
      /// @param _block The block number to retrieve the value at
      /// @return The number of reputation being queried
    function getValueAt(Checkpoint[] storage checkpoints, uint256 _block) internal view returns (uint256) {
        if (checkpoints.length == 0) {
            return 0;
        }

          // Shortcut for the actual value
        if (_block >= checkpoints[checkpoints.length-1].fromBlock) {
            return checkpoints[checkpoints.length-1].value;
        }
        if (_block < checkpoints[0].fromBlock) {
            return 0;
        }

          // Binary search of the value in the array
        uint256 min = 0;
        uint256 max = checkpoints.length-1;
        while (max > min) {
            uint256 mid = (max + min + 1) / 2;
            if (checkpoints[mid].fromBlock<=_block) {
                min = mid;
            } else {
                max = mid-1;
            }
        }
        return checkpoints[min].value;
    }

      /// @dev `updateValueAtNow` used to update the `balances` map and the
      ///  `totalSupplyHistory`
      /// @param checkpoints The history of data being updated
      /// @param _value The new number of reputation
    function updateValueAtNow(Checkpoint[] storage checkpoints, uint256 _value) internal {
        require(uint128(_value) == _value); //check value is in the 128 bits bounderies
        if ((checkpoints.length == 0) || (checkpoints[checkpoints.length - 1].fromBlock < block.number)) {
            Checkpoint storage newCheckPoint = checkpoints[checkpoints.length++];
            newCheckPoint.fromBlock = uint128(block.number);
            newCheckPoint.value = uint128(_value);
        } else {
            Checkpoint storage oldCheckPoint = checkpoints[checkpoints.length-1];
            oldCheckPoint.value = uint128(_value);
        }
    }
}

// File: openzeppelin-solidity/contracts/token/ERC20/IERC20.sol

pragma solidity ^0.5.0;

/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
interface IERC20 {
    function transfer(address to, uint256 value) external returns (bool);

    function approve(address spender, uint256 value) external returns (bool);

    function transferFrom(address from, address to, uint256 value) external returns (bool);

    function totalSupply() external view returns (uint256);

    function balanceOf(address who) external view returns (uint256);

    function allowance(address owner, address spender) external view returns (uint256);

    event Transfer(address indexed from, address indexed to, uint256 value);

    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: openzeppelin-solidity/contracts/token/ERC20/ERC20.sol

pragma solidity ^0.5.0;



/**
 * @title Standard ERC20 token
 *
 * @dev Implementation of the basic standard token.
 * https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20.md
 * Originally based on code by FirstBlood:
 * https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
 *
 * This implementation emits additional Approval events, allowing applications to reconstruct the allowance status for
 * all accounts just by listening to said events. Note that this isn't required by the specification, and other
 * compliant implementations may not do it.
 */
contract ERC20 is IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowed;

    uint256 private _totalSupply;

    /**
    * @dev Total number of tokens in existence
    */
    function totalSupply() public view returns (uint256) {
        return _totalSupply;
    }

    /**
    * @dev Gets the balance of the specified address.
    * @param owner The address to query the balance of.
    * @return An uint256 representing the amount owned by the passed address.
    */
    function balanceOf(address owner) public view returns (uint256) {
        return _balances[owner];
    }

    /**
     * @dev Function to check the amount of tokens that an owner allowed to a spender.
     * @param owner address The address which owns the funds.
     * @param spender address The address which will spend the funds.
     * @return A uint256 specifying the amount of tokens still available for the spender.
     */
    function allowance(address owner, address spender) public view returns (uint256) {
        return _allowed[owner][spender];
    }

    /**
    * @dev Transfer token for a specified address
    * @param to The address to transfer to.
    * @param value The amount to be transferred.
    */
    function transfer(address to, uint256 value) public returns (bool) {
        _transfer(msg.sender, to, value);
        return true;
    }

    /**
     * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
     * Beware that changing an allowance with this method brings the risk that someone may use both the old
     * and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
     * race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     */
    function approve(address spender, uint256 value) public returns (bool) {
        require(spender != address(0));

        _allowed[msg.sender][spender] = value;
        emit Approval(msg.sender, spender, value);
        return true;
    }

    /**
     * @dev Transfer tokens from one address to another.
     * Note that while this function emits an Approval event, this is not required as per the specification,
     * and other compliant implementations may not emit the event.
     * @param from address The address which you want to send tokens from
     * @param to address The address which you want to transfer to
     * @param value uint256 the amount of tokens to be transferred
     */
    function transferFrom(address from, address to, uint256 value) public returns (bool) {
        _allowed[from][msg.sender] = _allowed[from][msg.sender].sub(value);
        _transfer(from, to, value);
        emit Approval(from, msg.sender, _allowed[from][msg.sender]);
        return true;
    }

    /**
     * @dev Increase the amount of tokens that an owner allowed to a spender.
     * approve should be called when allowed_[_spender] == 0. To increment
     * allowed value is better to use this function to avoid 2 calls (and wait until
     * the first transaction is mined)
     * From MonolithDAO Token.sol
     * Emits an Approval event.
     * @param spender The address which will spend the funds.
     * @param addedValue The amount of tokens to increase the allowance by.
     */
    function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
        require(spender != address(0));

        _allowed[msg.sender][spender] = _allowed[msg.sender][spender].add(addedValue);
        emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
        return true;
    }

    /**
     * @dev Decrease the amount of tokens that an owner allowed to a spender.
     * approve should be called when allowed_[_spender] == 0. To decrement
     * allowed value is better to use this function to avoid 2 calls (and wait until
     * the first transaction is mined)
     * From MonolithDAO Token.sol
     * Emits an Approval event.
     * @param spender The address which will spend the funds.
     * @param subtractedValue The amount of tokens to decrease the allowance by.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
        require(spender != address(0));

        _allowed[msg.sender][spender] = _allowed[msg.sender][spender].sub(subtractedValue);
        emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
        return true;
    }

    /**
    * @dev Transfer token for a specified addresses
    * @param from The address to transfer from.
    * @param to The address to transfer to.
    * @param value The amount to be transferred.
    */
    function _transfer(address from, address to, uint256 value) internal {
        require(to != address(0));

        _balances[from] = _balances[from].sub(value);
        _balances[to] = _balances[to].add(value);
        emit Transfer(from, to, value);
    }

    /**
     * @dev Internal function that mints an amount of the token and assigns it to
     * an account. This encapsulates the modification of balances such that the
     * proper events are emitted.
     * @param account The account that will receive the created tokens.
     * @param value The amount that will be created.
     */
    function _mint(address account, uint256 value) internal {
        require(account != address(0));

        _totalSupply = _totalSupply.add(value);
        _balances[account] = _balances[account].add(value);
        emit Transfer(address(0), account, value);
    }

    /**
     * @dev Internal function that burns an amount of the token of a given
     * account.
     * @param account The account whose tokens will be burnt.
     * @param value The amount that will be burnt.
     */
    function _burn(address account, uint256 value) internal {
        require(account != address(0));

        _totalSupply = _totalSupply.sub(value);
        _balances[account] = _balances[account].sub(value);
        emit Transfer(account, address(0), value);
    }

    /**
     * @dev Internal function that burns an amount of the token of a given
     * account, deducting from the sender's allowance for said account. Uses the
     * internal burn function.
     * Emits an Approval event (reflecting the reduced allowance).
     * @param account The account whose tokens will be burnt.
     * @param value The amount that will be burnt.
     */
    function _burnFrom(address account, uint256 value) internal {
        _allowed[account][msg.sender] = _allowed[account][msg.sender].sub(value);
        _burn(account, value);
        emit Approval(account, msg.sender, _allowed[account][msg.sender]);
    }
}

// File: openzeppelin-solidity/contracts/token/ERC20/ERC20Burnable.sol

pragma solidity ^0.5.0;


/**
 * @title Burnable Token
 * @dev Token that can be irreversibly burned (destroyed).
 */
contract ERC20Burnable is ERC20 {
    /**
     * @dev Burns a specific amount of tokens.
     * @param value The amount of token to be burned.
     */
    function burn(uint256 value) public {
        _burn(msg.sender, value);
    }

    /**
     * @dev Burns a specific amount of tokens from the target address and decrements allowance
     * @param from address The address which you want to send tokens from
     * @param value uint256 The amount of token to be burned
     */
    function burnFrom(address from, uint256 value) public {
        _burnFrom(from, value);
    }
}

// File: @daostack/arc/contracts/controller/DAOToken.sol

pragma solidity ^0.5.4;





/**
 * @title DAOToken, base on zeppelin contract.
 * @dev ERC20 compatible token. It is a mintable, burnable token.
 */

contract DAOToken is ERC20, ERC20Burnable, Ownable {

    string public name;
    string public symbol;
    // solhint-disable-next-line const-name-snakecase
    uint8 public constant decimals = 18;
    uint256 public cap;

    /**
    * @dev Constructor
    * @param _name - token name
    * @param _symbol - token symbol
    * @param _cap - token cap - 0 value means no cap
    */
    constructor(string memory _name, string memory _symbol, uint256 _cap)
    public {
        name = _name;
        symbol = _symbol;
        cap = _cap;
    }

    /**
     * @dev Function to mint tokens
     * @param _to The address that will receive the minted tokens.
     * @param _amount The amount of tokens to mint.
     */
    function mint(address _to, uint256 _amount) public onlyOwner returns (bool) {
        if (cap > 0)
            require(totalSupply().add(_amount) <= cap);
        _mint(_to, _amount);
        return true;
    }
}

// File: openzeppelin-solidity/contracts/utils/Address.sol

pragma solidity ^0.5.0;

/**
 * Utility library of inline functions on addresses
 */
library Address {
    /**
     * Returns whether the target address is a contract
     * @dev This function will return false if invoked during the constructor of a contract,
     * as the code is not actually created until after the constructor finishes.
     * @param account address of the account to check
     * @return whether the target address is a contract
     */
    function isContract(address account) internal view returns (bool) {
        uint256 size;
        // XXX Currently there is no better way to check if there is a contract in an address
        // than to check the size of the code at that address.
        // See https://ethereum.stackexchange.com/a/14016/36603
        // for more details about how this works.
        // TODO Check this again before the Serenity release, because all addresses will be
        // contracts then.
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }
}

// File: @daostack/arc/contracts/libs/SafeERC20.sol

/*

SafeERC20 by daostack.
The code is based on a fix by SECBIT Team.

USE WITH CAUTION & NO WARRANTY

REFERENCE & RELATED READING
- https://github.com/ethereum/solidity/issues/4116
- https://medium.com/@chris_77367/explaining-unexpected-reverts-starting-with-solidity-0-4-22-3ada6e82308c
- https://medium.com/coinmonks/missing-return-value-bug-at-least-130-tokens-affected-d67bf08521ca
- https://gist.github.com/BrendanChou/88a2eeb80947ff00bcf58ffdafeaeb61

*/
pragma solidity ^0.5.4;



library SafeERC20 {
    using Address for address;

    bytes4 constant private TRANSFER_SELECTOR = bytes4(keccak256(bytes("transfer(address,uint256)")));
    bytes4 constant private TRANSFERFROM_SELECTOR = bytes4(keccak256(bytes("transferFrom(address,address,uint256)")));
    bytes4 constant private APPROVE_SELECTOR = bytes4(keccak256(bytes("approve(address,uint256)")));

    function safeTransfer(address _erc20Addr, address _to, uint256 _value) internal {

        // Must be a contract addr first!
        require(_erc20Addr.isContract());

        (bool success, bytes memory returnValue) =
        // solhint-disable-next-line avoid-low-level-calls
        _erc20Addr.call(abi.encodeWithSelector(TRANSFER_SELECTOR, _to, _value));
        // call return false when something wrong
        require(success);
        //check return value
        require(returnValue.length == 0 || (returnValue.length == 32 && (returnValue[31] != 0)));
    }

    function safeTransferFrom(address _erc20Addr, address _from, address _to, uint256 _value) internal {

        // Must be a contract addr first!
        require(_erc20Addr.isContract());

        (bool success, bytes memory returnValue) =
        // solhint-disable-next-line avoid-low-level-calls
        _erc20Addr.call(abi.encodeWithSelector(TRANSFERFROM_SELECTOR, _from, _to, _value));
        // call return false when something wrong
        require(success);
        //check return value
        require(returnValue.length == 0 || (returnValue.length == 32 && (returnValue[31] != 0)));
    }

    function safeApprove(address _erc20Addr, address _spender, uint256 _value) internal {

        // Must be a contract addr first!
        require(_erc20Addr.isContract());

        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero.
        require((_value == 0) || (IERC20(_erc20Addr).allowance(address(this), _spender) == 0));

        (bool success, bytes memory returnValue) =
        // solhint-disable-next-line avoid-low-level-calls
        _erc20Addr.call(abi.encodeWithSelector(APPROVE_SELECTOR, _spender, _value));
        // call return false when something wrong
        require(success);
        //check return value
        require(returnValue.length == 0 || (returnValue.length == 32 && (returnValue[31] != 0)));
    }
}

// File: @daostack/arc/contracts/controller/Avatar.sol

pragma solidity ^0.5.4;







/**
 * @title An Avatar holds tokens, reputation and ether for a controller
 */
contract Avatar is Ownable {
    using SafeERC20 for address;

    string public orgName;
    DAOToken public nativeToken;
    Reputation public nativeReputation;

    event GenericCall(address indexed _contract, bytes _data, uint _value, bool _success);
    event SendEther(uint256 _amountInWei, address indexed _to);
    event ExternalTokenTransfer(address indexed _externalToken, address indexed _to, uint256 _value);
    event ExternalTokenTransferFrom(address indexed _externalToken, address _from, address _to, uint256 _value);
    event ExternalTokenApproval(address indexed _externalToken, address _spender, uint256 _value);
    event ReceiveEther(address indexed _sender, uint256 _value);
    event MetaData(string _metaData);

    /**
    * @dev the constructor takes organization name, native token and reputation system
    and creates an avatar for a controller
    */
    constructor(string memory _orgName, DAOToken _nativeToken, Reputation _nativeReputation) public {
        orgName = _orgName;
        nativeToken = _nativeToken;
        nativeReputation = _nativeReputation;
    }

    /**
    * @dev enables an avatar to receive ethers
    */
    function() external payable {
        emit ReceiveEther(msg.sender, msg.value);
    }

    /**
    * @dev perform a generic call to an arbitrary contract
    * @param _contract  the contract's address to call
    * @param _data ABI-encoded contract call to call `_contract` address.
    * @param _value value (ETH) to transfer with the transaction
    * @return bool    success or fail
    *         bytes - the return bytes of the called contract's function.
    */
    function genericCall(address _contract, bytes memory _data, uint256 _value)
    public
    onlyOwner
    returns(bool success, bytes memory returnValue) {
      // solhint-disable-next-line avoid-call-value
        (success, returnValue) = _contract.call.value(_value)(_data);
        emit GenericCall(_contract, _data, _value, success);
    }

    /**
    * @dev send ethers from the avatar's wallet
    * @param _amountInWei amount to send in Wei units
    * @param _to send the ethers to this address
    * @return bool which represents success
    */
    function sendEther(uint256 _amountInWei, address payable _to) public onlyOwner returns(bool) {
        _to.transfer(_amountInWei);
        emit SendEther(_amountInWei, _to);
        return true;
    }

    /**
    * @dev external token transfer
    * @param _externalToken the token contract
    * @param _to the destination address
    * @param _value the amount of tokens to transfer
    * @return bool which represents success
    */
    function externalTokenTransfer(IERC20 _externalToken, address _to, uint256 _value)
    public onlyOwner returns(bool)
    {
        address(_externalToken).safeTransfer(_to, _value);
        emit ExternalTokenTransfer(address(_externalToken), _to, _value);
        return true;
    }

    /**
    * @dev external token transfer from a specific account
    * @param _externalToken the token contract
    * @param _from the account to spend token from
    * @param _to the destination address
    * @param _value the amount of tokens to transfer
    * @return bool which represents success
    */
    function externalTokenTransferFrom(
        IERC20 _externalToken,
        address _from,
        address _to,
        uint256 _value
    )
    public onlyOwner returns(bool)
    {
        address(_externalToken).safeTransferFrom(_from, _to, _value);
        emit ExternalTokenTransferFrom(address(_externalToken), _from, _to, _value);
        return true;
    }

    /**
    * @dev externalTokenApproval approve the spender address to spend a specified amount of tokens
    *      on behalf of msg.sender.
    * @param _externalToken the address of the Token Contract
    * @param _spender address
    * @param _value the amount of ether (in Wei) which the approval is referring to.
    * @return bool which represents a success
    */
    function externalTokenApproval(IERC20 _externalToken, address _spender, uint256 _value)
    public onlyOwner returns(bool)
    {
        address(_externalToken).safeApprove(_spender, _value);
        emit ExternalTokenApproval(address(_externalToken), _spender, _value);
        return true;
    }

    /**
    * @dev metaData emits an event with a string, should contain the hash of some meta data.
    * @param _metaData a string representing a hash of the meta data
    * @return bool which represents a success
    */
    function metaData(string memory _metaData) public onlyOwner returns(bool) {
        emit MetaData(_metaData);
        return true;
    }


}

// File: @daostack/arc/contracts/globalConstraints/GlobalConstraintInterface.sol

pragma solidity ^0.5.4;


contract GlobalConstraintInterface {

    enum CallPhase { Pre, Post, PreAndPost }

    function pre( address _scheme, bytes32 _params, bytes32 _method ) public returns(bool);
    function post( address _scheme, bytes32 _params, bytes32 _method ) public returns(bool);
    /**
     * @dev when return if this globalConstraints is pre, post or both.
     * @return CallPhase enum indication  Pre, Post or PreAndPost.
     */
    function when() public returns(CallPhase);
}

// File: @daostack/arc/contracts/controller/ControllerInterface.sol

pragma solidity ^0.5.4;



/**
 * @title Controller contract
 * @dev A controller controls the organizations tokens ,reputation and avatar.
 * It is subject to a set of schemes and constraints that determine its behavior.
 * Each scheme has it own parameters and operation permissions.
 */
interface ControllerInterface {

    /**
     * @dev Mint `_amount` of reputation that are assigned to `_to` .
     * @param  _amount amount of reputation to mint
     * @param _to beneficiary address
     * @return bool which represents a success
    */
    function mintReputation(uint256 _amount, address _to, address _avatar)
    external
    returns(bool);

    /**
     * @dev Burns `_amount` of reputation from `_from`
     * @param _amount amount of reputation to burn
     * @param _from The address that will lose the reputation
     * @return bool which represents a success
     */
    function burnReputation(uint256 _amount, address _from, address _avatar)
    external
    returns(bool);

    /**
     * @dev mint tokens .
     * @param  _amount amount of token to mint
     * @param _beneficiary beneficiary address
     * @param _avatar address
     * @return bool which represents a success
     */
    function mintTokens(uint256 _amount, address _beneficiary, address _avatar)
    external
    returns(bool);

  /**
   * @dev register or update a scheme
   * @param _scheme the address of the scheme
   * @param _paramsHash a hashed configuration of the usage of the scheme
   * @param _permissions the permissions the new scheme will have
   * @param _avatar address
   * @return bool which represents a success
   */
    function registerScheme(address _scheme, bytes32 _paramsHash, bytes4 _permissions, address _avatar)
    external
    returns(bool);

    /**
     * @dev unregister a scheme
     * @param _avatar address
     * @param _scheme the address of the scheme
     * @return bool which represents a success
     */
    function unregisterScheme(address _scheme, address _avatar)
    external
    returns(bool);

    /**
     * @dev unregister the caller's scheme
     * @param _avatar address
     * @return bool which represents a success
     */
    function unregisterSelf(address _avatar) external returns(bool);

    /**
     * @dev add or update Global Constraint
     * @param _globalConstraint the address of the global constraint to be added.
     * @param _params the constraint parameters hash.
     * @param _avatar the avatar of the organization
     * @return bool which represents a success
     */
    function addGlobalConstraint(address _globalConstraint, bytes32 _params, address _avatar)
    external returns(bool);

    /**
     * @dev remove Global Constraint
     * @param _globalConstraint the address of the global constraint to be remove.
     * @param _avatar the organization avatar.
     * @return bool which represents a success
     */
    function removeGlobalConstraint (address _globalConstraint, address _avatar)
    external  returns(bool);

  /**
    * @dev upgrade the Controller
    *      The function will trigger an event 'UpgradeController'.
    * @param  _newController the address of the new controller.
    * @param _avatar address
    * @return bool which represents a success
    */
    function upgradeController(address _newController, Avatar _avatar)
    external returns(bool);

    /**
    * @dev perform a generic call to an arbitrary contract
    * @param _contract  the contract's address to call
    * @param _data ABI-encoded contract call to call `_contract` address.
    * @param _avatar the controller's avatar address
    * @param _value value (ETH) to transfer with the transaction
    * @return bool -success
    *         bytes  - the return value of the called _contract's function.
    */
    function genericCall(address _contract, bytes calldata _data, Avatar _avatar, uint256 _value)
    external
    returns(bool, bytes memory);

  /**
   * @dev send some ether
   * @param _amountInWei the amount of ether (in Wei) to send
   * @param _to address of the beneficiary
   * @param _avatar address
   * @return bool which represents a success
   */
    function sendEther(uint256 _amountInWei, address payable _to, Avatar _avatar)
    external returns(bool);

    /**
    * @dev send some amount of arbitrary ERC20 Tokens
    * @param _externalToken the address of the Token Contract
    * @param _to address of the beneficiary
    * @param _value the amount of ether (in Wei) to send
    * @param _avatar address
    * @return bool which represents a success
    */
    function externalTokenTransfer(IERC20 _externalToken, address _to, uint256 _value, Avatar _avatar)
    external
    returns(bool);

    /**
    * @dev transfer token "from" address "to" address
    *      One must to approve the amount of tokens which can be spend from the
    *      "from" account.This can be done using externalTokenApprove.
    * @param _externalToken the address of the Token Contract
    * @param _from address of the account to send from
    * @param _to address of the beneficiary
    * @param _value the amount of ether (in Wei) to send
    * @param _avatar address
    * @return bool which represents a success
    */
    function externalTokenTransferFrom(
    IERC20 _externalToken,
    address _from,
    address _to,
    uint256 _value,
    Avatar _avatar)
    external
    returns(bool);

    /**
    * @dev externalTokenApproval approve the spender address to spend a specified amount of tokens
    *      on behalf of msg.sender.
    * @param _externalToken the address of the Token Contract
    * @param _spender address
    * @param _value the amount of ether (in Wei) which the approval is referring to.
    * @return bool which represents a success
    */
    function externalTokenApproval(IERC20 _externalToken, address _spender, uint256 _value, Avatar _avatar)
    external
    returns(bool);

    /**
    * @dev metaData emits an event with a string, should contain the hash of some meta data.
    * @param _metaData a string representing a hash of the meta data
    * @param _avatar Avatar
    * @return bool which represents a success
    */
    function metaData(string calldata _metaData, Avatar _avatar) external returns(bool);

    /**
     * @dev getNativeReputation
     * @param _avatar the organization avatar.
     * @return organization native reputation
     */
    function getNativeReputation(address _avatar)
    external
    view
    returns(address);

    function isSchemeRegistered( address _scheme, address _avatar) external view returns(bool);

    function getSchemeParameters(address _scheme, address _avatar) external view returns(bytes32);

    function getGlobalConstraintParameters(address _globalConstraint, address _avatar) external view returns(bytes32);

    function getSchemePermissions(address _scheme, address _avatar) external view returns(bytes4);

    /**
     * @dev globalConstraintsCount return the global constraint pre and post count
     * @return uint256 globalConstraintsPre count.
     * @return uint256 globalConstraintsPost count.
     */
    function globalConstraintsCount(address _avatar) external view returns(uint, uint);

    function isGlobalConstraintRegistered(address _globalConstraint, address _avatar) external view returns(bool);
}

// File: @daostack/arc/contracts/schemes/Auction4Reputation.sol

pragma solidity ^0.5.4;




/**
 * @title A scheme for conduct ERC20 Tokens auction for reputation
 */


contract Auction4Reputation is Ownable {
    using SafeMath for uint256;
    using SafeERC20 for address;

    event Bid(address indexed _bidder, uint256 indexed _auctionId, uint256 _amount);
    event Redeem(uint256 indexed _auctionId, address indexed _beneficiary, uint256 _amount);

    struct Auction {
        uint256 totalBid;
        // A mapping from bidder addresses to their bids.
        mapping(address=>uint) bids;
    }

    // A mapping from auction index to auction.
    mapping(uint=>Auction) public auctions;

    Avatar public avatar;
    uint256 public reputationRewardLeft;
    uint256 public auctionsEndTime;
    uint256 public auctionsStartTime;
    uint256 public numberOfAuctions;
    uint256 public auctionReputationReward;
    uint256 public auctionPeriod;
    uint256 public redeemEnableTime;
    IERC20 public token;
    address public wallet;

    /**
     * @dev initialize
     * @param _avatar the avatar to mint reputation from
     * @param _auctionReputationReward the reputation reward per auction this contract will reward
     *        for the token locking
     * @param _auctionsStartTime auctions period start time
     * @param _auctionPeriod auctions period time.
     *        auctionsEndTime is set to _auctionsStartTime + _auctionPeriod*_numberOfAuctions
     *        bidding is disable after auctionsEndTime.
     * @param _numberOfAuctions number of auctions.
     * @param _redeemEnableTime redeem enable time .
     *        redeem reputation can be done after this time.
     * @param _token the bidding token
     * @param  _wallet the address of the wallet the token will be transfer to.
     *         Please note that _wallet address should be a trusted account.
     *         Normally this address should be set as the DAO's avatar address.
     */
    function initialize(
        Avatar _avatar,
        uint256 _auctionReputationReward,
        uint256 _auctionsStartTime,
        uint256 _auctionPeriod,
        uint256 _numberOfAuctions,
        uint256 _redeemEnableTime,
        IERC20 _token,
        address _wallet)
    external
    {
        require(avatar == Avatar(0), "can be called only one time");
        require(_avatar != Avatar(0), "avatar cannot be zero");
        require(_numberOfAuctions > 0, "number of auctions cannot be zero");
        //_auctionPeriod should be greater than block interval
        require(_auctionPeriod > 15, "auctionPeriod should be > 15");
        auctionPeriod = _auctionPeriod;
        auctionsEndTime = _auctionsStartTime + _auctionPeriod.mul(_numberOfAuctions);
        require(_redeemEnableTime >= auctionsEndTime, "_redeemEnableTime >= auctionsEndTime");
        token = _token;
        avatar = _avatar;
        auctionsStartTime = _auctionsStartTime;
        numberOfAuctions = _numberOfAuctions;
        wallet = _wallet;
        auctionReputationReward = _auctionReputationReward;
        reputationRewardLeft = _auctionReputationReward.mul(_numberOfAuctions);
        redeemEnableTime = _redeemEnableTime;
    }

    /**
     * @dev redeem reputation function
     * @param _beneficiary the beneficiary to redeem.
     * @param _auctionId the auction id to redeem from.
     * @return uint256 reputation rewarded
     */
    function redeem(address _beneficiary, uint256 _auctionId) public returns(uint256 reputation) {
        // solhint-disable-next-line not-rely-on-time
        require(now > redeemEnableTime, "now > redeemEnableTime");
        Auction storage auction = auctions[_auctionId];
        uint256 bid = auction.bids[_beneficiary];
        require(bid > 0, "bidding amount should be > 0");
        auction.bids[_beneficiary] = 0;
        uint256 repRelation = bid.mul(auctionReputationReward);
        reputation = repRelation.div(auction.totalBid);
        // check that the reputation is sum zero
        reputationRewardLeft = reputationRewardLeft.sub(reputation);
        require(
        ControllerInterface(avatar.owner())
        .mintReputation(reputation, _beneficiary, address(avatar)), "mint reputation should succeed");
        emit Redeem(_auctionId, _beneficiary, reputation);
    }

    /**
     * @dev bid function
     * @param _amount the amount to bid with
     * @param _auctionId the auction id to bid at .
     * @return auctionId
     */
    function bid(uint256 _amount, uint256 _auctionId) public returns(uint256 auctionId) {
        require(_amount > 0, "bidding amount should be > 0");
        // solhint-disable-next-line not-rely-on-time
        require(now < auctionsEndTime, "bidding should be within the allowed bidding period");
        // solhint-disable-next-line not-rely-on-time
        require(now >= auctionsStartTime, "bidding is enable only after bidding auctionsStartTime");
        address(token).safeTransferFrom(msg.sender, address(this), _amount);
        // solhint-disable-next-line not-rely-on-time
        auctionId = (now - auctionsStartTime) / auctionPeriod;
        require(auctionId == _auctionId, "auction is not active");
        Auction storage auction = auctions[auctionId];
        auction.totalBid = auction.totalBid.add(_amount);
        auction.bids[msg.sender] = auction.bids[msg.sender].add(_amount);
        emit Bid(msg.sender, auctionId, _amount);
    }

    /**
     * @dev getBid get bid for specific bidder and _auctionId
     * @param _bidder the bidder
     * @param _auctionId auction id
     * @return uint
     */
    function getBid(address _bidder, uint256 _auctionId) public view returns(uint256) {
        return auctions[_auctionId].bids[_bidder];
    }

    /**
     * @dev transferToWallet transfer the tokens to the wallet.
     *      can be called only after auctionsEndTime
     */
    function transferToWallet() public {
      // solhint-disable-next-line not-rely-on-time
        require(now > auctionsEndTime, "now > auctionsEndTime");
        uint256 tokenBalance = token.balanceOf(address(this));
        address(token).safeTransfer(wallet, tokenBalance);
    }

}

// File: contracts/schemes/bootstrap/DxGenAuction4Rep.sol

pragma solidity ^0.5.4;


/**
 * @title Scheme for conducting ERC20 Tokens auctions for reputation
 */
contract DxGenAuction4Rep is Auction4Reputation {
    constructor() public {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"constant":true,"inputs":[],"name":"auctionPeriod","outputs":[{"name":"","type":"uint256"}],"payable":false,"stateMutability":"view","type":"function"},{"constant":true,"inputs":[],"name":"auctionReputationReward","outputs":[{"name":"","type":"uint256"}],"payable":false,"stateMutability":"view","type":"function"},{"constant":true,"inputs":[{"name":"_bidder","type":"address"},{"name":"_auctionId","type":"uint256"}],"name":"getBid","outputs":[{"name":"","type":"uint256"}],"payable":false,"stateMutability":"view","type":"function"},{"constant":false,"inputs":[{"name":"_beneficiary","type":"address"},{"name":"_auctionId","type":"uint256"}],"name":"redeem","outputs":[{"name":"reputation","type":"uint256"}],"payable":false,"stateMutability":"nonpayable","type":"function"},{"constant":false,"inputs":[{"name":"_avatar","type":"address"},{"name":"_auctionReputationReward","type":"uint256"},{"name":"_auctionsStartTime","type":"uint256"},{"name":"_auctionPeriod","type":"uint256"},{"name":"_numberOfAuctions","type":"uint256"},{"name":"_redeemEnableTime","type":"uint256"},{"name":"_token","type":"address"},{"name":"_wallet","type":"address"}],"name":"initialize","outputs":[],"payable":false,"stateMutability":"nonpayable","type":"function"},{"constant":true,"inputs":[],"name":"redeemEnableTime","outputs":[{"name":"","type":"uint256"}],"payable":false,"stateMutability":"view","type":"function"},{"constant":false,"inputs":[],"name":"transferToWallet","outputs":[],"payable":false,"stateMutability":"nonpayable","type":"function"},{"constant":true,"inputs":[],"name":"numberOfAuctions","outputs":[{"name":"","type":"uint256"}],"payable":false,"stateMutability":"view","type":"function"},{"constant":true,"inputs":[],"name":"wallet","outputs":[{"name":"","type":"address"}],"payable":false,"stateMutability":"view","type":"function"},{"constant":true,"inputs":[],"name":"auctionsEndTime","outputs":[{"name":"","type":"uint256"}],"payable":false,"stateMutability":"view","type":"function"},{"constant":true,"inputs":[{"name":"","type":"uint256"}],"name":"auctions","outputs":[{"name":"totalBid","type":"uint256"}],"payable":false,"stateMutability":"view","type":"function"},{"constant":false,"inputs":[{"name":"_amount","type":"uint256"},{"name":"_auctionId","type":"uint256"}],"name":"bid","outputs":[{"name":"auctionId","type":"uint256"}],"payable":false,"stateMutability":"nonpayable","type":"function"},{"constant":true,"inputs":[],"name":"avatar","outputs":[{"name":"","type":"address"}],"payable":false,"stateMutability":"view","type":"function"},{"constant":false,"inputs":[],"name":"renounceOwnership","outputs":[],"payable":false,"stateMutability":"nonpayable","type":"function"},{"constant":true,"inputs":[],"name":"owner","outputs":[{"name":"","type":"address"}],"payable":false,"stateMutability":"view","type":"function"},{"constant":true,"inputs":[],"name":"isOwner","outputs":[{"name":"","type":"bool"}],"payable":false,"stateMutability":"view","type":"function"},{"constant":true,"inputs":[],"name":"auctionsStartTime","outputs":[{"name":"","type":"uint256"}],"payable":false,"stateMutability":"view","type":"function"},{"constant":true,"inputs":[],"name":"reputationRewardLeft","outputs":[{"name":"","type":"uint256"}],"payable":false,"stateMutability":"view","type":"function"},{"constant":false,"inputs":[{"name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"payable":false,"stateMutability":"nonpayable","type":"function"},{"constant":true,"inputs":[],"name":"token","outputs":[{"name":"","type":"address"}],"payable":false,"stateMutability":"view","type":"function"},{"inputs":[],"payable":false,"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"name":"_bidder","type":"address"},{"indexed":true,"name":"_auctionId","type":"uint256"},{"indexed":false,"name":"_amount","type":"uint256"}],"name":"Bid","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"name":"_auctionId","type":"uint256"},{"indexed":true,"name":"_beneficiary","type":"address"},{"indexed":false,"name":"_amount","type":"uint256"}],"name":"Redeem","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"name":"previousOwner","type":"address"},{"indexed":true,"name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"}]

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

0x608060405234801561001057600080fd5b5060043610610149576000357c010000000000000000000000000000000000000000000000000000000090048063571a26a0116100ca5780638f32d59b1161008e5780638f32d59b146102bb5780639abc03d2146102d7578063afe0e33c146102df578063f2fde38b146102e7578063fc0c546a1461030d57610149565b8063571a26a014610263578063598647f8146102805780635aef7de6146102a3578063715018a6146102ab5780638da5cb5b146102b357610149565b80633d1678f4116101115780633d1678f41461021f5780634870b81d1461022757806350d9d4721461022f578063521eb2731461023757806356e492871461025b57610149565b80630cccfc581461014e57806311c4dbf41461016857806316ab2b03146101705780631e9a69501461019c5780632737033f146101c8575b600080fd5b610156610315565b60408051918252519081900360200190f35b61015661031b565b6101566004803603604081101561018657600080fd5b50600160a060020a038135169060200135610321565b610156600480360360408110156101b257600080fd5b50600160a060020a03813516906020013561034d565b61021d60048036036101008110156101df57600080fd5b50600160a060020a03813581169160208101359160408201359160608101359160808201359160a08101359160c082013581169160e0013516610653565b005b610156610883565b61021d610889565b61015661099b565b61023f6109a1565b60408051600160a060020a039092168252519081900360200190f35b6101566109b0565b6101566004803603602081101561027957600080fd5b50356109b6565b6101566004803603604081101561029657600080fd5b50803590602001356109c8565b61023f610bc6565b61021d610bd5565b61023f610c3f565b6102c3610c4e565b604080519115158252519081900360200190f35b610156610c5f565b610156610c65565b61021d600480360360208110156102fd57600080fd5b5035600160a060020a0316610c6b565b61023f610c87565b60085481565b60075481565b6000818152600160208181526040808420600160a060020a038716855290920190529020545b92915050565b60095460009042116103a9576040805160e560020a62461bcd02815260206004820152601660248201527f6e6f77203e2072656465656d456e61626c6554696d6500000000000000000000604482015290519081900360640190fd5b6000828152600160208181526040808420600160a060020a038816855292830190915282205490918111610427576040805160e560020a62461bcd02815260206004820152601c60248201527f62696464696e6720616d6f756e742073686f756c64206265203e203000000000604482015290519081900360640190fd5b600160a060020a0385166000908152600183016020526040812081905560075461045890839063ffffffff610c9616565b835490915061046e90829063ffffffff610cc816565b600354909450610484908563ffffffff610cec16565b600355600254604080517f8da5cb5b0000000000000000000000000000000000000000000000000000000081529051600160a060020a0390921691638da5cb5b91600480820192602092909190829003018186803b1580156104e557600080fd5b505afa1580156104f9573d6000803e3d6000fd5b505050506040513d602081101561050f57600080fd5b5051600254604080517feaf994b200000000000000000000000000000000000000000000000000000000815260048101889052600160a060020a038a8116602483015292831660448201529051919092169163eaf994b29160648083019260209291908290030181600087803b15801561058857600080fd5b505af115801561059c573d6000803e3d6000fd5b505050506040513d60208110156105b257600080fd5b5051151561060a576040805160e560020a62461bcd02815260206004820152601e60248201527f6d696e742072657075746174696f6e2073686f756c6420737563636565640000604482015290519081900360640190fd5b604080518581529051600160a060020a0388169187917f1069ba7d3dd3d969eada9a014b1e1a8e2ab1ef7f38989db8ce98e698ac844f659181900360200190a350505092915050565b600254600160a060020a0316156106b4576040805160e560020a62461bcd02815260206004820152601b60248201527f63616e2062652063616c6c6564206f6e6c79206f6e652074696d650000000000604482015290519081900360640190fd5b600160a060020a0388161515610714576040805160e560020a62461bcd02815260206004820152601560248201527f6176617461722063616e6e6f74206265207a65726f0000000000000000000000604482015290519081900360640190fd5b600084116107565760405160e560020a62461bcd02815260040180806020018281038252602181526020018061123a6021913960400191505060405180910390fd5b600f85116107ae576040805160e560020a62461bcd02815260206004820152601c60248201527f61756374696f6e506572696f642073686f756c64206265203e20313500000000604482015290519081900360640190fd5b60088590556107c3858563ffffffff610c9616565b8601600481905583101561080b5760405160e560020a62461bcd0281526004018080602001828103825260248152602001806111bb6024913960400191505060405180910390fd5b600a8054600160a060020a0380851673ffffffffffffffffffffffffffffffffffffffff1992831617909255600280548b841690831617905560058890556006869055600b8054928416929091169190911790556007879055610874878563ffffffff610c9616565b60035550506009555050505050565b60095481565b60045442116108e2576040805160e560020a62461bcd02815260206004820152601560248201527f6e6f77203e2061756374696f6e73456e6454696d650000000000000000000000604482015290519081900360640190fd5b600a54604080517f70a082310000000000000000000000000000000000000000000000000000000081523060048201529051600092600160a060020a0316916370a08231916024808301926020929190829003018186803b15801561094657600080fd5b505afa15801561095a573d6000803e3d6000fd5b505050506040513d602081101561097057600080fd5b5051600b54600a5491925061099891600160a060020a0390811691168363ffffffff610d0116565b50565b60065481565b600b54600160a060020a031681565b60045481565b60016020526000908152604090205481565b6000808311610a21576040805160e560020a62461bcd02815260206004820152601c60248201527f62696464696e6720616d6f756e742073686f756c64206265203e203000000000604482015290519081900360640190fd5b6004544210610a645760405160e560020a62461bcd0281526004018080602001828103825260338152602001806111886033913960400191505060405180910390fd5b600554421015610aa85760405160e560020a62461bcd0281526004018080602001828103825260368152602001806112046036913960400191505060405180910390fd5b600a54610ac690600160a060020a031633308663ffffffff610ef816565b6008546005544203811515610ad757fe5b049050818114610b31576040805160e560020a62461bcd02815260206004820152601560248201527f61756374696f6e206973206e6f74206163746976650000000000000000000000604482015290519081900360640190fd5b60008181526001602052604090208054610b51908563ffffffff6110f016565b8155336000908152600182016020526040902054610b75908563ffffffff6110f016565b336000818152600184016020908152604091829020939093558051878152905185937f19421268847f42dd61705778018ddfc43bcdce8517e7a630acb12f122c709481928290030190a35092915050565b600254600160a060020a031681565b610bdd610c4e565b1515610be857600080fd5b60008054604051600160a060020a03909116907f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e0908390a36000805473ffffffffffffffffffffffffffffffffffffffff19169055565b600054600160a060020a031690565b600054600160a060020a0316331490565b60055481565b60035481565b610c73610c4e565b1515610c7e57600080fd5b61099881611102565b600a54600160a060020a031681565b6000821515610ca757506000610347565b828202828482811515610cb657fe5b0414610cc157600080fd5b9392505050565b6000808211610cd657600080fd5b60008284811515610ce357fe5b04949350505050565b600082821115610cfb57600080fd5b50900390565b610d1383600160a060020a031661117f565b1515610d1e57600080fd5b604080518082018252601981527f7472616e7366657228616464726573732c75696e7432353629000000000000006020918201528151600160a060020a0385811660248301526044808301869052845180840390910181526064909201845291810180517bffffffffffffffffffffffffffffffffffffffffffffffffffffffff167fa9059cbb000000000000000000000000000000000000000000000000000000001781529251815160009460609489169392918291908083835b60208310610df95780518252601f199092019160209182019101610dda565b6001836020036101000a0380198251168184511680821785525050505050509050019150506000604051808303816000865af19150503d8060008114610e5b576040519150601f19603f3d011682016040523d82523d6000602084013e610e60565b606091505b5091509150811515610e7157600080fd5b80511580610ee6575080516020148015610ee6575080601f815181101515610e9557fe5b6020910101517f010000000000000000000000000000000000000000000000000000000000000090819004027fff000000000000000000000000000000000000000000000000000000000000001615155b1515610ef157600080fd5b5050505050565b610f0a84600160a060020a031661117f565b1515610f1557600080fd5b6000606085600160a060020a0316606060405190810160405280602581526020016111df60259139805160209182012060408051600160a060020a03808b166024830152891660448201526064808201899052825180830390910181526084909101825292830180517bffffffffffffffffffffffffffffffffffffffffffffffffffffffff167fffffffff00000000000000000000000000000000000000000000000000000000909316929092178252518251909182918083835b60208310610ff05780518252601f199092019160209182019101610fd1565b6001836020036101000a0380198251168184511680821785525050505050509050019150506000604051808303816000865af19150503d8060008114611052576040519150601f19603f3d011682016040523d82523d6000602084013e611057565b606091505b509150915081151561106857600080fd5b805115806110dd5750805160201480156110dd575080601f81518110151561108c57fe5b6020910101517f010000000000000000000000000000000000000000000000000000000000000090819004027fff000000000000000000000000000000000000000000000000000000000000001615155b15156110e857600080fd5b505050505050565b600082820183811015610cc157600080fd5b600160a060020a038116151561111757600080fd5b60008054604051600160a060020a03808516939216917f8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e091a36000805473ffffffffffffffffffffffffffffffffffffffff1916600160a060020a0392909216919091179055565b6000903b119056fe62696464696e672073686f756c642062652077697468696e2074686520616c6c6f7765642062696464696e6720706572696f645f72656465656d456e61626c6554696d65203e3d2061756374696f6e73456e6454696d657472616e7366657246726f6d28616464726573732c616464726573732c75696e743235362962696464696e6720697320656e61626c65206f6e6c792061667465722062696464696e672061756374696f6e73537461727454696d656e756d626572206f662061756374696f6e732063616e6e6f74206265207a65726fa165627a7a72305820cd9a3b2139a9193f4b8715df842f0d74769c558249175acdb1d68cd03deead8a0029

bzzr://cd9a3b2139a9193f4b8715df842f0d74769c558249175acdb1d68cd03deead8a