Contract

Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: LGPL-3.0-only
// Created By: Art Blocks Inc.

import "../../interfaces/v0.8.x/IGenArt721CoreContractV3_Base.sol";
import "../../interfaces/v0.8.x/IMinterFilterV0.sol";
import "../../interfaces/v0.8.x/IFilteredMinterMerkleV2.sol";
import "../../interfaces/v0.8.x/IDelegationRegistry.sol";
import "./MinterBase_v0_1_1.sol";

import "@openzeppelin-4.7/contracts/utils/cryptography/MerkleProof.sol";
import "@openzeppelin-4.7/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin-4.7/contracts/security/ReentrancyGuard.sol";

pragma solidity 0.8.19;

/**
 * @title Filtered Minter contract that allows tokens to be minted with ETH
 * for addresses in a Merkle allowlist.
 * This is designed to be used with GenArt721CoreContractV3 flagship or
 * engine contracts.
 * @author Art Blocks Inc.
 * @notice Privileged Roles and Ownership:
 * This contract is designed to be managed, with limited powers.
 * Privileged roles and abilities are controlled by the project's artist, which
 * can be modified by the core contract's Admin ACL contract. Both of these
 * roles hold extensive power and can modify minter details.
 * Care must be taken to ensure that the admin ACL contract and artist
 * addresses are secure behind a multi-sig or other access control mechanism.
 * ----------------------------------------------------------------------------
 * The following functions are restricted to a project's artist:
 * - updateMerkleRoot
 * - updatePricePerTokenInWei
 * - setProjectInvocationsPerAddress
 * - setProjectMaxInvocations
 * - manuallyLimitProjectMaxInvocations
 * ----------------------------------------------------------------------------
 * Additional admin and artist privileged roles may be described on other
 * contracts that this minter integrates with.
 * ----------------------------------------------------------------------------
 * This contract allows vaults to configure token-level or wallet-level
 * delegation of minting privileges. This allows a vault on an allowlist to
 * delegate minting privileges to a wallet that is not on the allowlist,
 * enabling the vault to remain air-gapped while still allowing minting. The
 * delegation registry contract is responsible for managing these delegations,
 * and is available at the address returned by the public immutable
 * `delegationRegistryAddress`. At the time of writing, the delegation
 * registry enables easy delegation configuring at https://delegate.cash/.
 * Art Blocks does not guarentee the security of the delegation registry, and
 * users should take care to ensure that the delegation registry is secure.
 * Token-level delegations are configured by the vault owner, and contract-
 * level delegations must be configured for the core token contract as returned
 * by the public immutable variable `genArt721CoreAddress`.
 */
contract MinterMerkleV5 is
    ReentrancyGuard,
    MinterBase,
    IFilteredMinterMerkleV2
{
    using MerkleProof for bytes32[];

    /// Delegation registry address
    address public immutable delegationRegistryAddress;

    /// Delegation registry address
    IDelegationRegistry private immutable delegationRegistryContract;

    /// Core contract address this minter interacts with
    address public immutable genArt721CoreAddress;

    /// The core contract integrates with V3 contracts
    IGenArt721CoreContractV3_Base private immutable genArtCoreContract_Base;

    /// Minter filter address this minter interacts with
    address public immutable minterFilterAddress;

    /// Minter filter this minter may interact with.
    IMinterFilterV0 private immutable minterFilter;

    /// minterType for this minter
    string public constant minterType = "MinterMerkleV5";

    /// minter version for this minter
    string public constant minterVersion = "v5.1.0";

    /// project minter configuration keys used by this minter
    bytes32 private constant CONFIG_MERKLE_ROOT = "merkleRoot";
    bytes32 private constant CONFIG_USE_MAX_INVOCATIONS_PER_ADDRESS_OVERRIDE =
        "useMaxMintsPerAddrOverride"; // shortened to fit in 32 bytes
    bytes32 private constant CONFIG_MAX_INVOCATIONS_OVERRIDE =
        "maxMintsPerAddrOverride"; // shortened to match format of previous key

    uint256 constant ONE_MILLION = 1_000_000;

    uint256 public constant DEFAULT_MAX_INVOCATIONS_PER_ADDRESS = 1;

    struct ProjectConfig {
        bool maxHasBeenInvoked;
        bool priceIsConfigured;
        // initial value is false, so by default, projects limit allowlisted
        // addresses to a mint qty of `DEFAULT_MAX_INVOCATIONS_PER_ADDRESS`
        bool useMaxInvocationsPerAddressOverride;
        // a value of 0 means no limit
        // (only used if `useMaxInvocationsPerAddressOverride` is true)
        uint24 maxInvocationsPerAddressOverride;
        uint24 maxInvocations;
        uint256 pricePerTokenInWei;
    }

    mapping(uint256 => ProjectConfig) public projectConfig;

    /// projectId => merkle root
    mapping(uint256 => bytes32) public projectMerkleRoot;

    /// projectId => purchaser address => qty of mints purchased for project
    mapping(uint256 => mapping(address => uint256))
        public projectUserMintInvocations;

    function _onlyArtist(uint256 _projectId) internal view {
        require(
            msg.sender ==
                genArtCoreContract_Base.projectIdToArtistAddress(_projectId),
            "Only Artist"
        );
    }

    /**
     * @notice Initializes contract to be a Filtered Minter for
     * `_minterFilter`, integrated with Art Blocks core contract
     * at address `_genArt721Address`. Also configures the delegation
     * registry address to be address `_delegationRegistryAddress`.
     * @param _genArt721Address Art Blocks core contract address for
     * which this contract will be a minter.
     * @param _minterFilter Minter filter for which this will be a
     * filtered minter.
     * @param _delegationRegistryAddress Delegation registry contract address.
     */
    constructor(
        address _genArt721Address,
        address _minterFilter,
        address _delegationRegistryAddress
    ) ReentrancyGuard() MinterBase(_genArt721Address) {
        genArt721CoreAddress = _genArt721Address;
        // always populate immutable engine contracts, but only use appropriate
        // interface based on isEngine in the rest of the contract
        genArtCoreContract_Base = IGenArt721CoreContractV3_Base(
            _genArt721Address
        );
        delegationRegistryAddress = _delegationRegistryAddress;
        emit DelegationRegistryUpdated(_delegationRegistryAddress);
        delegationRegistryContract = IDelegationRegistry(
            _delegationRegistryAddress
        );
        minterFilterAddress = _minterFilter;
        minterFilter = IMinterFilterV0(_minterFilter);
        require(
            minterFilter.genArt721CoreAddress() == _genArt721Address,
            "Illegal contract pairing"
        );
        // broadcast default max invocations per address for this minter
        emit DefaultMaxInvocationsPerAddress(
            DEFAULT_MAX_INVOCATIONS_PER_ADDRESS
        );
    }

    /**
     * @notice Update the Merkle root for project `_projectId`.
     * @param _projectId Project ID to be updated.
     * @param _root root of Merkle tree defining addresses allowed to mint
     * on project `_projectId`.
     */
    function updateMerkleRoot(uint256 _projectId, bytes32 _root) external {
        _onlyArtist(_projectId);
        require(_root != bytes32(0), "Root must be provided");
        projectMerkleRoot[_projectId] = _root;
        emit ConfigValueSet(_projectId, CONFIG_MERKLE_ROOT, _root);
    }

    /**
     * @notice Returns hashed address (to be used as merkle tree leaf).
     * Included as a public function to enable users to calculate their hashed
     * address in Solidity when generating proofs off-chain.
     * @param _address address to be hashed
     * @return bytes32 hashed address, via keccak256 (using encodePacked)
     */
    function hashAddress(address _address) public pure returns (bytes32) {
        return keccak256(abi.encodePacked(_address));
    }

    /**
     * @notice Verify if address is allowed to mint on project `_projectId`.
     * @param _projectId Project ID to be checked.
     * @param _proof Merkle proof for address.
     * @param _address Address to check.
     * @return inAllowlist true only if address is allowed to mint and valid
     * Merkle proof was provided
     */
    function verifyAddress(
        uint256 _projectId,
        bytes32[] calldata _proof,
        address _address
    ) public view returns (bool) {
        return
            _proof.verifyCalldata(
                projectMerkleRoot[_projectId],
                hashAddress(_address)
            );
    }

    /**
     * @notice Sets maximum allowed invocations per allowlisted address for
     * project `_project` to `limit`. If `limit` is set to 0, allowlisted
     * addresses will be able to mint as many times as desired, until the
     * project reaches its maximum invocations.
     * Default is a value of 1 if never configured by artist.
     * @param _projectId Project ID to toggle the mint limit.
     * @param _maxInvocationsPerAddress Maximum allowed invocations per
     * allowlisted address.
     * @dev default value stated above must be updated if the value of
     * CONFIG_USE_MAX_INVOCATIONS_PER_ADDRESS_OVERRIDE is changed.
     */
    function setProjectInvocationsPerAddress(
        uint256 _projectId,
        uint24 _maxInvocationsPerAddress
    ) external {
        _onlyArtist(_projectId);
        ProjectConfig storage _projectConfig = projectConfig[_projectId];
        // use override value instead of the contract's default
        // @dev this never changes from true to false; default value is only
        // used if artist has never configured project invocations per address
        _projectConfig.useMaxInvocationsPerAddressOverride = true;
        // update the override value
        _projectConfig
            .maxInvocationsPerAddressOverride = _maxInvocationsPerAddress;
        // generic events
        emit ConfigValueSet(
            _projectId,
            CONFIG_USE_MAX_INVOCATIONS_PER_ADDRESS_OVERRIDE,
            true
        );
        emit ConfigValueSet(
            _projectId,
            CONFIG_MAX_INVOCATIONS_OVERRIDE,
            uint256(_maxInvocationsPerAddress)
        );
    }

    /**
     * @notice Syncs local maximum invocations of project `_projectId` based on
     * the value currently defined in the core contract.
     * @param _projectId Project ID to set the maximum invocations for.
     * @dev this enables gas reduction after maxInvocations have been reached -
     * core contracts shall still enforce a maxInvocation check during mint.
     */
    function setProjectMaxInvocations(uint256 _projectId) public {
        _onlyArtist(_projectId);
        uint256 maxInvocations;
        uint256 invocations;
        (invocations, maxInvocations, , , , ) = genArtCoreContract_Base
            .projectStateData(_projectId);
        // update storage with results
        projectConfig[_projectId].maxInvocations = uint24(maxInvocations);

        // We need to ensure maxHasBeenInvoked is correctly set after manually syncing the
        // local maxInvocations value with the core contract's maxInvocations value.
        // This synced value of maxInvocations from the core contract will always be greater
        // than or equal to the previous value of maxInvocations stored locally.
        projectConfig[_projectId].maxHasBeenInvoked =
            invocations == maxInvocations;

        emit ProjectMaxInvocationsLimitUpdated(_projectId, maxInvocations);
    }

    /**
     * @notice Manually sets the local maximum invocations of project `_projectId`
     * with the provided `_maxInvocations`, checking that `_maxInvocations` is less
     * than or equal to the value of project `_project_id`'s maximum invocations that is
     * set on the core contract.
     * @dev Note that a `_maxInvocations` of 0 can only be set if the current `invocations`
     * value is also 0 and this would also set `maxHasBeenInvoked` to true, correctly short-circuiting
     * this minter's purchase function, avoiding extra gas costs from the core contract's maxInvocations check.
     * @param _projectId Project ID to set the maximum invocations for.
     * @param _maxInvocations Maximum invocations to set for the project.
     */
    function manuallyLimitProjectMaxInvocations(
        uint256 _projectId,
        uint256 _maxInvocations
    ) external {
        _onlyArtist(_projectId);
        // CHECKS
        // ensure that the manually set maxInvocations is not greater than what is set on the core contract
        uint256 maxInvocations;
        uint256 invocations;
        (invocations, maxInvocations, , , , ) = genArtCoreContract_Base
            .projectStateData(_projectId);
        require(
            _maxInvocations <= maxInvocations,
            "Cannot increase project max invocations above core contract set project max invocations"
        );
        require(
            _maxInvocations >= invocations,
            "Cannot set project max invocations to less than current invocations"
        );

        // EFFECTS
        // update storage with results
        projectConfig[_projectId].maxInvocations = uint24(_maxInvocations);
        // We need to ensure maxHasBeenInvoked is correctly set after manually setting the
        // local maxInvocations value.
        projectConfig[_projectId].maxHasBeenInvoked =
            invocations == _maxInvocations;

        emit ProjectMaxInvocationsLimitUpdated(_projectId, _maxInvocations);
    }

    /**
     * @notice Warning: Disabling purchaseTo is not supported on this minter.
     * This method exists purely for interface-conformance purposes.
     */
    function togglePurchaseToDisabled(uint256 _projectId) external view {
        _onlyArtist(_projectId);
        revert("Action not supported");
    }

    /**
     * @notice projectId => has project reached its maximum number of
     * invocations? Note that this returns a local cache of the core contract's
     * state, and may be out of sync with the core contract. This is
     * intentional, as it only enables gas optimization of mints after a
     * project's maximum invocations has been reached. A false negative will
     * only result in a gas cost increase, since the core contract will still
     * enforce a maxInvocation check during minting. A false positive is not
     * possible because the V3 core contract only allows maximum invocations
     * to be reduced, not increased. Based on this rationale, we intentionally
     * do not do input validation in this method as to whether or not the input
     * `_projectId` is an existing project ID.
     */
    function projectMaxHasBeenInvoked(
        uint256 _projectId
    ) external view returns (bool) {
        return projectConfig[_projectId].maxHasBeenInvoked;
    }

    /**
     * @notice projectId => project's maximum number of invocations.
     * Optionally synced with core contract value, for gas optimization.
     * Note that this returns a local cache of the core contract's
     * state, and may be out of sync with the core contract. This is
     * intentional, as it only enables gas optimization of mints after a
     * project's maximum invocations has been reached.
     * @dev A number greater than the core contract's project max invocations
     * will only result in a gas cost increase, since the core contract will
     * still enforce a maxInvocation check during minting. A number less than
     * the core contract's project max invocations is only possible when the
     * project's max invocations have not been synced on this minter, since the
     * V3 core contract only allows maximum invocations to be reduced, not
     * increased. When this happens, the minter will enable minting, allowing
     * the core contract to enforce the max invocations check. Based on this
     * rationale, we intentionally do not do input validation in this method as
     * to whether or not the input `_projectId` is an existing project ID.
     */
    function projectMaxInvocations(
        uint256 _projectId
    ) external view returns (uint256) {
        return uint256(projectConfig[_projectId].maxInvocations);
    }

    /**
     * @notice Updates this minter's price per token of project `_projectId`
     * to be '_pricePerTokenInWei`, in Wei.
     * This price supersedes any legacy core contract price per token value.
     * @dev Note that it is intentionally supported here that the configured
     * price may be explicitly set to `0`.
     */
    function updatePricePerTokenInWei(
        uint256 _projectId,
        uint256 _pricePerTokenInWei
    ) external {
        _onlyArtist(_projectId);
        ProjectConfig storage _projectConfig = projectConfig[_projectId];
        _projectConfig.pricePerTokenInWei = _pricePerTokenInWei;
        _projectConfig.priceIsConfigured = true;
        emit PricePerTokenInWeiUpdated(_projectId, _pricePerTokenInWei);

        // sync local max invocations if not initially populated
        // @dev if local max invocations and maxHasBeenInvoked are both
        // initial values, we know they have not been populated.
        if (
            _projectConfig.maxInvocations == 0 &&
            _projectConfig.maxHasBeenInvoked == false
        ) {
            setProjectMaxInvocations(_projectId);
        }
    }

    /**
     * @notice Inactive function - requires Merkle proof to purchase.
     */
    function purchase(uint256) external payable returns (uint256) {
        revert("Must provide Merkle proof");
    }

    /**
     * @notice Inactive function - requires Merkle proof to purchase.
     */
    function purchaseTo(address, uint256) public payable returns (uint256) {
        revert("Must provide Merkle proof");
    }

    /**
     * @notice Purchases a token from project `_projectId`.
     * @param _projectId Project ID to mint a token on.
     * @param _proof Merkle proof.
     * @return tokenId Token ID of minted token
     */
    function purchase(
        uint256 _projectId,
        bytes32[] calldata _proof
    ) external payable returns (uint256 tokenId) {
        tokenId = purchaseTo_kem(msg.sender, _projectId, _proof, address(0));
        return tokenId;
    }

    /**
     * @notice gas-optimized version of purchase(uint256,bytes32[]).
     */
    function purchase_gD5(
        uint256 _projectId,
        bytes32[] calldata _proof
    ) external payable returns (uint256 tokenId) {
        tokenId = purchaseTo_kem(msg.sender, _projectId, _proof, address(0));
        return tokenId;
    }

    /**
     * @notice Purchases a token from project `_projectId` and sets
     * the token's owner to `_to`.
     * @param _to Address to be the new token's owner.
     * @param _projectId Project ID to mint a token on.
     * @param _proof Merkle proof.
     * @return tokenId Token ID of minted token
     */
    function purchaseTo(
        address _to,
        uint256 _projectId,
        bytes32[] calldata _proof
    ) external payable returns (uint256 tokenId) {
        return purchaseTo_kem(_to, _projectId, _proof, address(0));
    }

    /**
     * @notice Purchases a token from project `_projectId` and sets
     *         the token's owner to `_to`, as a delegate, (the `msg.sender`)
     *         on behalf of an explicitly defined vault.
     * @param _to Address to be the new token's owner.
     * @param _projectId Project ID to mint a token on.
     * @param _proof Merkle proof.
     * @param _vault Vault being purchased on behalf of.
     * @return tokenId Token ID of minted token
     */
    function purchaseTo(
        address _to,
        uint256 _projectId,
        bytes32[] calldata _proof,
        address _vault
    ) external payable returns (uint256 tokenId) {
        return purchaseTo_kem(_to, _projectId, _proof, _vault);
    }

    /**
     * @notice gas-optimized version of
     * purchaseTo(address,uint256,bytes32[],address).
     * @param _to Address to be the new token's owner.
     * @param _projectId Project ID to mint a token on.
     * @param _proof Merkle proof. Must be a valid proof of either `msg.sender`
     * if `_vault` is `address(0)`, or `_vault` if `_vault` is not `address(0)`.
     * @param _vault Vault being purchased on behalf of. Acceptable to be
     * address(0) if no vault.
     */
    function purchaseTo_kem(
        address _to,
        uint256 _projectId,
        bytes32[] calldata _proof,
        address _vault // acceptable to be `address(0)` if no vault
    ) public payable nonReentrant returns (uint256 tokenId) {
        // CHECKS
        ProjectConfig storage _projectConfig = projectConfig[_projectId];

        // Note that `maxHasBeenInvoked` is only checked here to reduce gas
        // consumption after a project has been fully minted.
        // `_projectConfig.maxHasBeenInvoked` is locally cached to reduce
        // gas consumption, but if not in sync with the core contract's value,
        // the core contract also enforces its own max invocation check during
        // minting.
        require(
            !_projectConfig.maxHasBeenInvoked,
            "Maximum number of invocations reached"
        );

        // load price of token into memory
        uint256 pricePerTokenInWei = _projectConfig.pricePerTokenInWei;

        require(
            msg.value >= pricePerTokenInWei,
            "Must send minimum value to mint!"
        );

        // require artist to have configured price of token on this minter
        require(_projectConfig.priceIsConfigured, "Price not configured");

        // no contract filter since Merkle tree controls allowed addresses

        // NOTE: delegate-vault handling **begins here**.

        // handle that the vault may be either the `msg.sender` in the case
        // that there is not a true vault, or may be `_vault` if one is
        // provided explicitly (and it is valid).
        address vault = msg.sender;
        if (_vault != address(0)) {
            // If a vault is provided, it must be valid, otherwise throw rather
            // than optimistically-minting with original `msg.sender`.
            // Note, we do not check `checkDelegateForAll` as well, as it is known
            // to be implicitly checked by calling `checkDelegateForContract`.
            bool isValidDelegee = delegationRegistryContract
                .checkDelegateForContract(
                    msg.sender, // delegate
                    _vault, // vault
                    genArt721CoreAddress // contract
                );
            require(isValidDelegee, "Invalid delegate-vault pairing");
            vault = _vault;
        }

        // require valid Merkle proof
        require(
            verifyAddress(_projectId, _proof, vault),
            "Invalid Merkle proof"
        );

        // limit mints per address by project
        uint256 _maxProjectInvocationsPerAddress = _projectConfig
            .useMaxInvocationsPerAddressOverride
            ? _projectConfig.maxInvocationsPerAddressOverride
            : DEFAULT_MAX_INVOCATIONS_PER_ADDRESS;

        // note that mint limits index off of the `vault` (when applicable)
        require(
            projectUserMintInvocations[_projectId][vault] <
                _maxProjectInvocationsPerAddress ||
                _maxProjectInvocationsPerAddress == 0,
            "Maximum number of invocations per address reached"
        );

        // EFFECTS
        // increment user's invocations for this project
        unchecked {
            // this will never overflow since user's invocations on a project
            // are limited by the project's max invocations
            projectUserMintInvocations[_projectId][vault]++;
        }

        // mint token
        tokenId = minterFilter.mint(_to, _projectId, vault);

        // NOTE: delegate-vault handling **ends here**.

        // invocation is token number plus one, and will never overflow due to
        // limit of 1e6 invocations per project. block scope for gas efficiency
        // (i.e. avoid an unnecessary var initialization to 0).
        unchecked {
            uint256 tokenInvocation = (tokenId % ONE_MILLION) + 1;
            uint256 localMaxInvocations = _projectConfig.maxInvocations;
            // handle the case where the token invocation == minter local max
            // invocations occurred on a different minter, and we have a stale
            // local maxHasBeenInvoked value returning a false negative.
            // @dev this is a CHECK after EFFECTS, so security was considered
            // in detail here.
            require(
                tokenInvocation <= localMaxInvocations,
                "Maximum invocations reached"
            );
            // in typical case, update the local maxHasBeenInvoked value
            // to true if the token invocation == minter local max invocations
            // (enables gas efficient reverts after sellout)
            if (tokenInvocation == localMaxInvocations) {
                _projectConfig.maxHasBeenInvoked = true;
            }
        }

        // INTERACTIONS
        splitFundsETH(_projectId, pricePerTokenInWei, genArt721CoreAddress);

        return tokenId;
    }

    /**
     * @notice projectId => maximum invocations per allowlisted address. If a
     * a value of 0 is returned, there is no limit on the number of mints per
     * allowlisted address.
     * Default behavior is limit 1 mint per address.
     * This value can be changed at any time by the artist.
     * @dev default value stated above must be updated if the value of
     * CONFIG_USE_MAX_INVOCATIONS_PER_ADDRESS_OVERRIDE is changed.
     */
    function projectMaxInvocationsPerAddress(
        uint256 _projectId
    ) public view returns (uint256) {
        ProjectConfig storage _projectConfig = projectConfig[_projectId];
        if (_projectConfig.useMaxInvocationsPerAddressOverride) {
            return uint256(_projectConfig.maxInvocationsPerAddressOverride);
        } else {
            return DEFAULT_MAX_INVOCATIONS_PER_ADDRESS;
        }
    }

    /**
     * @notice Returns remaining invocations for a given address.
     * If `projectLimitsMintInvocationsPerAddress` is false, individual
     * addresses are only limited by the project's maximum invocations, and a
     * dummy value of zero is returned for `mintInvocationsRemaining`.
     * If `projectLimitsMintInvocationsPerAddress` is true, the quantity of
     * remaining mint invocations for address `_address` is returned as
     * `mintInvocationsRemaining`.
     * Note that mint invocations per address can be changed at any time by the
     * artist of a project.
     * Also note that all mint invocations are limited by a project's maximum
     * invocations as defined on the core contract. This function may return
     * a value greater than the project's remaining invocations.
     */
    function projectRemainingInvocationsForAddress(
        uint256 _projectId,
        address _address
    )
        external
        view
        returns (
            bool projectLimitsMintInvocationsPerAddress,
            uint256 mintInvocationsRemaining
        )
    {
        uint256 maxInvocationsPerAddress = projectMaxInvocationsPerAddress(
            _projectId
        );
        if (maxInvocationsPerAddress == 0) {
            // project does not limit mint invocations per address, so leave
            // `projectLimitsMintInvocationsPerAddress` at solidity initial
            // value of false. Also leave `mintInvocationsRemaining` at
            // solidity initial value of zero, as indicated in this function's
            // documentation.
        } else {
            projectLimitsMintInvocationsPerAddress = true;
            uint256 userMintInvocations = projectUserMintInvocations[
                _projectId
            ][_address];
            // if user has not reached max invocations per address, return
            // remaining invocations
            if (maxInvocationsPerAddress > userMintInvocations) {
                unchecked {
                    // will never underflow due to the check above
                    mintInvocationsRemaining =
                        maxInvocationsPerAddress -
                        userMintInvocations;
                }
            }
            // else user has reached their maximum invocations, so leave
            // `mintInvocationsRemaining` at solidity initial value of zero
        }
    }

    /**
     * @notice Process proof for an address. Returns Merkle root. Included to
     * enable users to easily verify a proof's validity.
     * @param _proof Merkle proof for address.
     * @param _address Address to process.
     * @return merkleRoot Merkle root for `_address` and `_proof`
     */
    function processProofForAddress(
        bytes32[] calldata _proof,
        address _address
    ) external pure returns (bytes32) {
        return _proof.processProofCalldata(hashAddress(_address));
    }

    /**
     * @notice Gets if price of token is configured, price of minting a
     * token on project `_projectId`, and currency symbol and address to be
     * used as payment. Supersedes any core contract price information.
     * @param _projectId Project ID to get price information for.
     * @return isConfigured true only if token price has been configured on
     * this minter
     * @return tokenPriceInWei current price of token on this minter - invalid
     * if price has not yet been configured
     * @return currencySymbol currency symbol for purchases of project on this
     * minter. This minter always returns "ETH"
     * @return currencyAddress currency address for purchases of project on
     * this minter. This minter always returns null address, reserved for ether
     */
    function getPriceInfo(
        uint256 _projectId
    )
        external
        view
        returns (
            bool isConfigured,
            uint256 tokenPriceInWei,
            string memory currencySymbol,
            address currencyAddress
        )
    {
        ProjectConfig storage _projectConfig = projectConfig[_projectId];
        isConfigured = _projectConfig.priceIsConfigured;
        tokenPriceInWei = _projectConfig.pricePerTokenInWei;
        currencySymbol = "ETH";
        currencyAddress = address(0);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/cryptography/MerkleProof.sol)

pragma solidity ^0.8.0;

/**
 * @dev These functions deal with verification of Merkle Tree proofs.
 *
 * The proofs can be generated using the JavaScript library
 * https://github.com/miguelmota/merkletreejs[merkletreejs].
 * Note: the hashing algorithm should be keccak256 and pair sorting should be enabled.
 *
 * See `test/utils/cryptography/MerkleProof.test.js` for some examples.
 *
 * WARNING: You should avoid using leaf values that are 64 bytes long prior to
 * hashing, or use a hash function other than keccak256 for hashing leaves.
 * This is because the concatenation of a sorted pair of internal nodes in
 * the merkle tree could be reinterpreted as a leaf value.
 */
library MerkleProof {
    /**
     * @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
     * defined by `root`. For this, a `proof` must be provided, containing
     * sibling hashes on the branch from the leaf to the root of the tree. Each
     * pair of leaves and each pair of pre-images are assumed to be sorted.
     */
    function verify(
        bytes32[] memory proof,
        bytes32 root,
        bytes32 leaf
    ) internal pure returns (bool) {
        return processProof(proof, leaf) == root;
    }

    /**
     * @dev Calldata version of {verify}
     *
     * _Available since v4.7._
     */
    function verifyCalldata(
        bytes32[] calldata proof,
        bytes32 root,
        bytes32 leaf
    ) internal pure returns (bool) {
        return processProofCalldata(proof, leaf) == root;
    }

    /**
     * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up
     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
     * hash matches the root of the tree. When processing the proof, the pairs
     * of leafs & pre-images are assumed to be sorted.
     *
     * _Available since v4.4._
     */
    function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
        bytes32 computedHash = leaf;
        for (uint256 i = 0; i < proof.length; i++) {
            computedHash = _hashPair(computedHash, proof[i]);
        }
        return computedHash;
    }

    /**
     * @dev Calldata version of {processProof}
     *
     * _Available since v4.7._
     */
    function processProofCalldata(bytes32[] calldata proof, bytes32 leaf) internal pure returns (bytes32) {
        bytes32 computedHash = leaf;
        for (uint256 i = 0; i < proof.length; i++) {
            computedHash = _hashPair(computedHash, proof[i]);
        }
        return computedHash;
    }

    /**
     * @dev Returns true if the `leaves` can be proved to be a part of a Merkle tree defined by
     * `root`, according to `proof` and `proofFlags` as described in {processMultiProof}.
     *
     * _Available since v4.7._
     */
    function multiProofVerify(
        bytes32[] memory proof,
        bool[] memory proofFlags,
        bytes32 root,
        bytes32[] memory leaves
    ) internal pure returns (bool) {
        return processMultiProof(proof, proofFlags, leaves) == root;
    }

    /**
     * @dev Calldata version of {multiProofVerify}
     *
     * _Available since v4.7._
     */
    function multiProofVerifyCalldata(
        bytes32[] calldata proof,
        bool[] calldata proofFlags,
        bytes32 root,
        bytes32[] memory leaves
    ) internal pure returns (bool) {
        return processMultiProofCalldata(proof, proofFlags, leaves) == root;
    }

    /**
     * @dev Returns the root of a tree reconstructed from `leaves` and the sibling nodes in `proof`,
     * consuming from one or the other at each step according to the instructions given by
     * `proofFlags`.
     *
     * _Available since v4.7._
     */
    function processMultiProof(
        bytes32[] memory proof,
        bool[] memory proofFlags,
        bytes32[] memory leaves
    ) internal pure returns (bytes32 merkleRoot) {
        // This function rebuild the root hash by traversing the tree up from the leaves. The root is rebuilt by
        // consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the
        // `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of
        // the merkle tree.
        uint256 leavesLen = leaves.length;
        uint256 totalHashes = proofFlags.length;

        // Check proof validity.
        require(leavesLen + proof.length - 1 == totalHashes, "MerkleProof: invalid multiproof");

        // The xxxPos values are "pointers" to the next value to consume in each array. All accesses are done using
        // `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's "pop".
        bytes32[] memory hashes = new bytes32[](totalHashes);
        uint256 leafPos = 0;
        uint256 hashPos = 0;
        uint256 proofPos = 0;
        // At each step, we compute the next hash using two values:
        // - a value from the "main queue". If not all leaves have been consumed, we get the next leaf, otherwise we
        //   get the next hash.
        // - depending on the flag, either another value for the "main queue" (merging branches) or an element from the
        //   `proof` array.
        for (uint256 i = 0; i < totalHashes; i++) {
            bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];
            bytes32 b = proofFlags[i] ? leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++] : proof[proofPos++];
            hashes[i] = _hashPair(a, b);
        }

        if (totalHashes > 0) {
            return hashes[totalHashes - 1];
        } else if (leavesLen > 0) {
            return leaves[0];
        } else {
            return proof[0];
        }
    }

    /**
     * @dev Calldata version of {processMultiProof}
     *
     * _Available since v4.7._
     */
    function processMultiProofCalldata(
        bytes32[] calldata proof,
        bool[] calldata proofFlags,
        bytes32[] memory leaves
    ) internal pure returns (bytes32 merkleRoot) {
        // This function rebuild the root hash by traversing the tree up from the leaves. The root is rebuilt by
        // consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the
        // `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of
        // the merkle tree.
        uint256 leavesLen = leaves.length;
        uint256 totalHashes = proofFlags.length;

        // Check proof validity.
        require(leavesLen + proof.length - 1 == totalHashes, "MerkleProof: invalid multiproof");

        // The xxxPos values are "pointers" to the next value to consume in each array. All accesses are done using
        // `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's "pop".
        bytes32[] memory hashes = new bytes32[](totalHashes);
        uint256 leafPos = 0;
        uint256 hashPos = 0;
        uint256 proofPos = 0;
        // At each step, we compute the next hash using two values:
        // - a value from the "main queue". If not all leaves have been consumed, we get the next leaf, otherwise we
        //   get the next hash.
        // - depending on the flag, either another value for the "main queue" (merging branches) or an element from the
        //   `proof` array.
        for (uint256 i = 0; i < totalHashes; i++) {
            bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];
            bytes32 b = proofFlags[i] ? leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++] : proof[proofPos++];
            hashes[i] = _hashPair(a, b);
        }

        if (totalHashes > 0) {
            return hashes[totalHashes - 1];
        } else if (leavesLen > 0) {
            return leaves[0];
        } else {
            return proof[0];
        }
    }

    function _hashPair(bytes32 a, bytes32 b) private pure returns (bytes32) {
        return a < b ? _efficientHash(a, b) : _efficientHash(b, a);
    }

    function _efficientHash(bytes32 a, bytes32 b) private pure returns (bytes32 value) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, a)
            mstore(0x20, b)
            value := keccak256(0x00, 0x40)
        }
    }
}

// SPDX-License-Identifier: LGPL-3.0-only
// Created By: Art Blocks Inc.

pragma solidity ^0.8.0;

interface IAdminACLV0 {
    /**
     * @notice Token ID `_tokenId` minted to `_to`.
     * @param previousSuperAdmin The previous superAdmin address.
     * @param newSuperAdmin The new superAdmin address.
     * @param genArt721CoreAddressesToUpdate Array of genArt721Core
     * addresses to update to the new superAdmin, for indexing purposes only.
     */
    event SuperAdminTransferred(
        address indexed previousSuperAdmin,
        address indexed newSuperAdmin,
        address[] genArt721CoreAddressesToUpdate
    );

    /// Type of the Admin ACL contract, e.g. "AdminACLV0"
    function AdminACLType() external view returns (string memory);

    /// super admin address
    function superAdmin() external view returns (address);

    /**
     * @notice Calls transferOwnership on other contract from this contract.
     * This is useful for updating to a new AdminACL contract.
     * @dev this function should be gated to only superAdmin-like addresses.
     */
    function transferOwnershipOn(
        address _contract,
        address _newAdminACL
    ) external;

    /**
     * @notice Calls renounceOwnership on other contract from this contract.
     * @dev this function should be gated to only superAdmin-like addresses.
     */
    function renounceOwnershipOn(address _contract) external;

    /**
     * @notice Checks if sender `_sender` is allowed to call function with selector
     * `_selector` on contract `_contract`.
     */
    function allowed(
        address _sender,
        address _contract,
        bytes4 _selector
    ) external returns (bool);
}

// SPDX-License-Identifier: CC0-1.0
pragma solidity ^0.8.19;

/// @dev Source: https://github.com/0xfoobar/delegation-registry/blob/main/src/IDelegationRegistry.sol

/**
 * @title An immutable registry contract to be deployed as a standalone primitive
 * @dev See EIP-5639, new project launches can read previous cold wallet -> hot wallet delegations
 * from here and integrate those permissions into their flow
 */
interface IDelegationRegistry {
    /// @notice Delegation type
    enum DelegationType {
        NONE,
        ALL,
        CONTRACT,
        TOKEN
    }

    /// @notice Info about a single delegation, used for onchain enumeration
    struct DelegationInfo {
        DelegationType type_;
        address vault;
        address delegate;
        address contract_;
        uint256 tokenId;
    }

    /// @notice Info about a single contract-level delegation
    struct ContractDelegation {
        address contract_;
        address delegate;
    }

    /// @notice Info about a single token-level delegation
    struct TokenDelegation {
        address contract_;
        uint256 tokenId;
        address delegate;
    }

    /// @notice Emitted when a user delegates their entire wallet
    event DelegateForAll(address vault, address delegate, bool value);

    /// @notice Emitted when a user delegates a specific contract
    event DelegateForContract(
        address vault,
        address delegate,
        address contract_,
        bool value
    );

    /// @notice Emitted when a user delegates a specific token
    event DelegateForToken(
        address vault,
        address delegate,
        address contract_,
        uint256 tokenId,
        bool value
    );

    /// @notice Emitted when a user revokes all delegations
    event RevokeAllDelegates(address vault);

    /// @notice Emitted when a user revoes all delegations for a given delegate
    event RevokeDelegate(address vault, address delegate);

    /**
     * -----------  WRITE -----------
     */

    /**
     * @notice Allow the delegate to act on your behalf for all contracts
     * @param delegate The hotwallet to act on your behalf
     * @param value Whether to enable or disable delegation for this address, true for setting and false for revoking
     */
    function delegateForAll(address delegate, bool value) external;

    /**
     * @notice Allow the delegate to act on your behalf for a specific contract
     * @param delegate The hotwallet to act on your behalf
     * @param contract_ The address for the contract you're delegating
     * @param value Whether to enable or disable delegation for this address, true for setting and false for revoking
     */
    function delegateForContract(
        address delegate,
        address contract_,
        bool value
    ) external;

    /**
     * @notice Allow the delegate to act on your behalf for a specific token
     * @param delegate The hotwallet to act on your behalf
     * @param contract_ The address for the contract you're delegating
     * @param tokenId The token id for the token you're delegating
     * @param value Whether to enable or disable delegation for this address, true for setting and false for revoking
     */
    function delegateForToken(
        address delegate,
        address contract_,
        uint256 tokenId,
        bool value
    ) external;

    /**
     * @notice Revoke all delegates
     */
    function revokeAllDelegates() external;

    /**
     * @notice Revoke a specific delegate for all their permissions
     * @param delegate The hotwallet to revoke
     */
    function revokeDelegate(address delegate) external;

    /**
     * @notice Remove yourself as a delegate for a specific vault
     * @param vault The vault which delegated to the msg.sender, and should be removed
     */
    function revokeSelf(address vault) external;

    /**
     * -----------  READ -----------
     */

    /**
     * @notice Returns all active delegations a given delegate is able to claim on behalf of
     * @param delegate The delegate that you would like to retrieve delegations for
     * @return info Array of DelegationInfo structs
     */
    function getDelegationsByDelegate(
        address delegate
    ) external view returns (DelegationInfo[] memory);

    /**
     * @notice Returns an array of wallet-level delegates for a given vault
     * @param vault The cold wallet who issued the delegation
     * @return addresses Array of wallet-level delegates for a given vault
     */
    function getDelegatesForAll(
        address vault
    ) external view returns (address[] memory);

    /**
     * @notice Returns an array of contract-level delegates for a given vault and contract
     * @param vault The cold wallet who issued the delegation
     * @param contract_ The address for the contract you're delegating
     * @return addresses Array of contract-level delegates for a given vault and contract
     */
    function getDelegatesForContract(
        address vault,
        address contract_
    ) external view returns (address[] memory);

    /**
     * @notice Returns an array of contract-level delegates for a given vault's token
     * @param vault The cold wallet who issued the delegation
     * @param contract_ The address for the contract holding the token
     * @param tokenId The token id for the token you're delegating
     * @return addresses Array of contract-level delegates for a given vault's token
     */
    function getDelegatesForToken(
        address vault,
        address contract_,
        uint256 tokenId
    ) external view returns (address[] memory);

    /**
     * @notice Returns all contract-level delegations for a given vault
     * @param vault The cold wallet who issued the delegations
     * @return delegations Array of ContractDelegation structs
     */
    function getContractLevelDelegations(
        address vault
    ) external view returns (ContractDelegation[] memory delegations);

    /**
     * @notice Returns all token-level delegations for a given vault
     * @param vault The cold wallet who issued the delegations
     * @return delegations Array of TokenDelegation structs
     */
    function getTokenLevelDelegations(
        address vault
    ) external view returns (TokenDelegation[] memory delegations);

    /**
     * @notice Returns true if the address is delegated to act on the entire vault
     * @param delegate The hotwallet to act on your behalf
     * @param vault The cold wallet who issued the delegation
     */
    function checkDelegateForAll(
        address delegate,
        address vault
    ) external view returns (bool);

    /**
     * @notice Returns true if the address is delegated to act on your behalf for a token contract or an entire vault
     * @param delegate The hotwallet to act on your behalf
     * @param contract_ The address for the contract you're delegating
     * @param vault The cold wallet who issued the delegation
     */
    function checkDelegateForContract(
        address delegate,
        address vault,
        address contract_
    ) external view returns (bool);

    /**
     * @notice Returns true if the address is delegated to act on your behalf for a specific token, the token's contract or an entire vault
     * @param delegate The hotwallet to act on your behalf
     * @param contract_ The address for the contract you're delegating
     * @param tokenId The token id for the token you're delegating
     * @param vault The cold wallet who issued the delegation
     */
    function checkDelegateForToken(
        address delegate,
        address vault,
        address contract_,
        uint256 tokenId
    ) external view returns (bool);
}

// SPDX-License-Identifier: LGPL-3.0-only
// Created By: Art Blocks Inc.

import "./IFilteredMinterV1.sol";

pragma solidity ^0.8.0;

/**
 * @title This interface extends the IFilteredMinterV1 interface in order to
 * add support for including Merkle proofs when purchasing.
 * @author Art Blocks Inc.
 */
interface IFilteredMinterMerkleV0 is IFilteredMinterV1 {
    /**
     * @notice Notifies of the contract's default maximum mints allowed per
     * user for a given project, on this minter. This value can be overridden
     * by the artist of any project at any time.
     */
    event DefaultMaxInvocationsPerAddress(
        uint256 defaultMaxInvocationsPerAddress
    );

    // Triggers a purchase of a token from the desired project, to the
    // TX-sending address. Requires Merkle proof.
    function purchase(
        uint256 _projectId,
        bytes32[] memory _proof
    ) external payable returns (uint256 tokenId);

    // Triggers a purchase of a token from the desired project, to the specified
    // receiving address. Requires Merkle proof.
    function purchaseTo(
        address _to,
        uint256 _projectId,
        bytes32[] memory _proof
    ) external payable returns (uint256 tokenId);
}

// SPDX-License-Identifier: LGPL-3.0-only
// Created By: Art Blocks Inc.

import "./IFilteredMinterMerkleV0.sol";

pragma solidity ^0.8.0;

/**
 * @title This interface extends the IFilteredMinterMerkleV0 interface in order
 * to add support for configuring and indexing the delegation registry address.
 * @author Art Blocks Inc.
 */
interface IFilteredMinterMerkleV1 is IFilteredMinterMerkleV0 {
    /**
     * @notice Notifies of the contract's configured delegation registry
     * address.
     */
    event DelegationRegistryUpdated(address delegationRegistryAddress);
}

// SPDX-License-Identifier: LGPL-3.0-only
// Created By: Art Blocks Inc.

import "./IFilteredMinterMerkleV1.sol";
import "./IFilteredMinterV2.sol";

pragma solidity ^0.8.0;

/**
 * @title This interface extends the IFilteredMinterMerkleV0 interface in order to
 * add support for manually setting project max invocations.
 * @author Art Blocks Inc.
 */
interface IFilteredMinterMerkleV2 is
    IFilteredMinterMerkleV1,
    IFilteredMinterV2
{

}

// SPDX-License-Identifier: LGPL-3.0-only
// Created By: Art Blocks Inc.

pragma solidity ^0.8.0;

interface IFilteredMinterV0 {
    /**
     * @notice Price per token in wei updated for project `_projectId` to
     * `_pricePerTokenInWei`.
     */
    event PricePerTokenInWeiUpdated(
        uint256 indexed _projectId,
        uint256 indexed _pricePerTokenInWei
    );

    /**
     * @notice Currency updated for project `_projectId` to symbol
     * `_currencySymbol` and address `_currencyAddress`.
     */
    event ProjectCurrencyInfoUpdated(
        uint256 indexed _projectId,
        address indexed _currencyAddress,
        string _currencySymbol
    );

    /// togglePurchaseToDisabled updated
    event PurchaseToDisabledUpdated(
        uint256 indexed _projectId,
        bool _purchaseToDisabled
    );

    // getter function of public variable
    function minterType() external view returns (string memory);

    function genArt721CoreAddress() external returns (address);

    function minterFilterAddress() external returns (address);

    // Triggers a purchase of a token from the desired project, to the
    // TX-sending address.
    function purchase(
        uint256 _projectId
    ) external payable returns (uint256 tokenId);

    // Triggers a purchase of a token from the desired project, to the specified
    // receiving address.
    function purchaseTo(
        address _to,
        uint256 _projectId
    ) external payable returns (uint256 tokenId);

    // Toggles the ability for `purchaseTo` to be called directly with a
    // specified receiving address that differs from the TX-sending address.
    function togglePurchaseToDisabled(uint256 _projectId) external;

    // Called to make the minter contract aware of the max invocations for a
    // given project.
    function setProjectMaxInvocations(uint256 _projectId) external;

    // Gets if token price is configured, token price in wei, currency symbol,
    // and currency address, assuming this is project's minter.
    // Supersedes any defined core price.
    function getPriceInfo(
        uint256 _projectId
    )
        external
        view
        returns (
            bool isConfigured,
            uint256 tokenPriceInWei,
            string memory currencySymbol,
            address currencyAddress
        );
}

// SPDX-License-Identifier: LGPL-3.0-only
// Created By: Art Blocks Inc.

import "./IFilteredMinterV0.sol";

pragma solidity ^0.8.0;

/**
 * @title This interface extends the IFilteredMinterV0 interface in order to
 * add support for generic project minter configuration updates.
 * @dev keys represent strings of finite length encoded in bytes32 to minimize
 * gas.
 * @author Art Blocks Inc.
 */
interface IFilteredMinterV1 is IFilteredMinterV0 {
    /// ANY
    /**
     * @notice Generic project minter configuration event. Removes key `_key`
     * for project `_projectId`.
     */
    event ConfigKeyRemoved(uint256 indexed _projectId, bytes32 _key);

    /// BOOL
    /**
     * @notice Generic project minter configuration event. Sets value of key
     * `_key` to `_value` for project `_projectId`.
     */
    event ConfigValueSet(uint256 indexed _projectId, bytes32 _key, bool _value);

    /// UINT256
    /**
     * @notice Generic project minter configuration event. Sets value of key
     * `_key` to `_value` for project `_projectId`.
     */
    event ConfigValueSet(
        uint256 indexed _projectId,
        bytes32 _key,
        uint256 _value
    );

    /**
     * @notice Generic project minter configuration event. Adds value `_value`
     * to the set of uint256 at key `_key` for project `_projectId`.
     */
    event ConfigValueAddedToSet(
        uint256 indexed _projectId,
        bytes32 _key,
        uint256 _value
    );

    /**
     * @notice Generic project minter configuration event. Removes value
     * `_value` to the set of uint256 at key `_key` for project `_projectId`.
     */
    event ConfigValueRemovedFromSet(
        uint256 indexed _projectId,
        bytes32 _key,
        uint256 _value
    );

    /// ADDRESS
    /**
     * @notice Generic project minter configuration event. Sets value of key
     * `_key` to `_value` for project `_projectId`.
     */
    event ConfigValueSet(
        uint256 indexed _projectId,
        bytes32 _key,
        address _value
    );

    /**
     * @notice Generic project minter configuration event. Adds value `_value`
     * to the set of addresses at key `_key` for project `_projectId`.
     */
    event ConfigValueAddedToSet(
        uint256 indexed _projectId,
        bytes32 _key,
        address _value
    );

    /**
     * @notice Generic project minter configuration event. Removes value
     * `_value` to the set of addresses at key `_key` for project `_projectId`.
     */
    event ConfigValueRemovedFromSet(
        uint256 indexed _projectId,
        bytes32 _key,
        address _value
    );

    /// BYTES32
    /**
     * @notice Generic project minter configuration event. Sets value of key
     * `_key` to `_value` for project `_projectId`.
     */
    event ConfigValueSet(
        uint256 indexed _projectId,
        bytes32 _key,
        bytes32 _value
    );

    /**
     * @notice Generic project minter configuration event. Adds value `_value`
     * to the set of bytes32 at key `_key` for project `_projectId`.
     */
    event ConfigValueAddedToSet(
        uint256 indexed _projectId,
        bytes32 _key,
        bytes32 _value
    );

    /**
     * @notice Generic project minter configuration event. Removes value
     * `_value` to the set of bytes32 at key `_key` for project `_projectId`.
     */
    event ConfigValueRemovedFromSet(
        uint256 indexed _projectId,
        bytes32 _key,
        bytes32 _value
    );

    /**
     * @dev Strings not supported. Recommend conversion of (short) strings to
     * bytes32 to remain gas-efficient.
     */
}

// SPDX-License-Identifier: LGPL-3.0-only
// Created By: Art Blocks Inc.

import "./IFilteredMinterV1.sol";

pragma solidity ^0.8.0;

/**
 * @title This interface extends the IFilteredMinterV1 interface in order to
 * add support for manually setting project max invocations.
 * @author Art Blocks Inc.
 */
interface IFilteredMinterV2 is IFilteredMinterV1 {
    /**
     * @notice Local max invocations for project `_projectId`, tied to core contract `_coreContractAddress`,
     * updated to `_maxInvocations`.
     */
    event ProjectMaxInvocationsLimitUpdated(
        uint256 indexed _projectId,
        uint256 _maxInvocations
    );

    // Sets the local max invocations for a given project, checking that the provided max invocations is
    // less than or equal to the global max invocations for the project set on the core contract.
    // This does not impact the max invocations value defined on the core contract.
    function manuallyLimitProjectMaxInvocations(
        uint256 _projectId,
        uint256 _maxInvocations
    ) external;
}

// SPDX-License-Identifier: LGPL-3.0-only
// Created By: Art Blocks Inc.

pragma solidity ^0.8.0;

import "./IAdminACLV0.sol";
/// use the Royalty Registry's IManifold interface for token royalties
import "./IManifold.sol";

/**
 * @title This interface is intended to house interface items that are common
 * across all GenArt721CoreContractV3 flagship and derivative implementations.
 * This interface extends the IManifold royalty interface in order to
 * add support the Royalty Registry by default.
 * @author Art Blocks Inc.
 */
interface IGenArt721CoreContractV3_Base is IManifold {
    /**
     * @notice Token ID `_tokenId` minted to `_to`.
     */
    event Mint(address indexed _to, uint256 indexed _tokenId);

    /**
     * @notice currentMinter updated to `_currentMinter`.
     * @dev Implemented starting with V3 core
     */
    event MinterUpdated(address indexed _currentMinter);

    /**
     * @notice Platform updated on bytes32-encoded field `_field`.
     */
    event PlatformUpdated(bytes32 indexed _field);

    /**
     * @notice Project ID `_projectId` updated on bytes32-encoded field
     * `_update`.
     */
    event ProjectUpdated(uint256 indexed _projectId, bytes32 indexed _update);

    event ProposedArtistAddressesAndSplits(
        uint256 indexed _projectId,
        address _artistAddress,
        address _additionalPayeePrimarySales,
        uint256 _additionalPayeePrimarySalesPercentage,
        address _additionalPayeeSecondarySales,
        uint256 _additionalPayeeSecondarySalesPercentage
    );

    event AcceptedArtistAddressesAndSplits(uint256 indexed _projectId);

    // version and type of the core contract
    // coreVersion is a string of the form "0.x.y"
    function coreVersion() external view returns (string memory);

    // coreType is a string of the form "GenArt721CoreV3"
    function coreType() external view returns (string memory);

    // owner (pre-V3 was named admin) of contract
    // this is expected to be an Admin ACL contract for V3
    function owner() external view returns (address);

    // Admin ACL contract for V3, will be at the address owner()
    function adminACLContract() external returns (IAdminACLV0);

    // backwards-compatible (pre-V3) admin - equal to owner()
    function admin() external view returns (address);

    /**
     * Function determining if _sender is allowed to call function with
     * selector _selector on contract `_contract`. Intended to be used with
     * peripheral contracts such as minters, as well as internally by the
     * core contract itself.
     */
    function adminACLAllowed(
        address _sender,
        address _contract,
        bytes4 _selector
    ) external returns (bool);

    /// getter function of public variable
    function startingProjectId() external view returns (uint256);

    // getter function of public variable
    function nextProjectId() external view returns (uint256);

    // getter function of public mapping
    function tokenIdToProjectId(
        uint256 tokenId
    ) external view returns (uint256 projectId);

    // @dev this is not available in V0
    function isMintWhitelisted(address minter) external view returns (bool);

    function projectIdToArtistAddress(
        uint256 _projectId
    ) external view returns (address payable);

    function projectIdToAdditionalPayeePrimarySales(
        uint256 _projectId
    ) external view returns (address payable);

    function projectIdToAdditionalPayeePrimarySalesPercentage(
        uint256 _projectId
    ) external view returns (uint256);

    function projectIdToSecondaryMarketRoyaltyPercentage(
        uint256 _projectId
    ) external view returns (uint256);

    function projectURIInfo(
        uint256 _projectId
    ) external view returns (string memory projectBaseURI);

    // @dev new function in V3
    function projectStateData(
        uint256 _projectId
    )
        external
        view
        returns (
            uint256 invocations,
            uint256 maxInvocations,
            bool active,
            bool paused,
            uint256 completedTimestamp,
            bool locked
        );

    function projectDetails(
        uint256 _projectId
    )
        external
        view
        returns (
            string memory projectName,
            string memory artist,
            string memory description,
            string memory website,
            string memory license
        );

    function projectScriptDetails(
        uint256 _projectId
    )
        external
        view
        returns (
            string memory scriptTypeAndVersion,
            string memory aspectRatio,
            uint256 scriptCount
        );

    function projectScriptByIndex(
        uint256 _projectId,
        uint256 _index
    ) external view returns (string memory);

    function tokenIdToHash(uint256 _tokenId) external view returns (bytes32);

    // function to set a token's hash (must be guarded)
    function setTokenHash_8PT(uint256 _tokenId, bytes32 _hash) external;

    // @dev gas-optimized signature in V3 for `mint`
    function mint_Ecf(
        address _to,
        uint256 _projectId,
        address _by
    ) external returns (uint256 tokenId);
}

// SPDX-License-Identifier: LGPL-3.0-only
// Created By: Art Blocks Inc.

pragma solidity ^0.8.0;

import "./IAdminACLV0.sol";
import "./IGenArt721CoreContractV3_Base.sol";

interface IGenArt721CoreContractV3_Engine is IGenArt721CoreContractV3_Base {
    // @dev new function in V3
    function getPrimaryRevenueSplits(
        uint256 _projectId,
        uint256 _price
    )
        external
        view
        returns (
            uint256 renderProviderRevenue_,
            address payable renderProviderAddress_,
            uint256 platformProviderRevenue_,
            address payable platformProviderAddress_,
            uint256 artistRevenue_,
            address payable artistAddress_,
            uint256 additionalPayeePrimaryRevenue_,
            address payable additionalPayeePrimaryAddress_
        );

    // @dev The render provider primary sales payment address
    function renderProviderPrimarySalesAddress()
        external
        view
        returns (address payable);

    // @dev The platform provider primary sales payment address
    function platformProviderPrimarySalesAddress()
        external
        view
        returns (address payable);

    // @dev Percentage of primary sales allocated to the render provider
    function renderProviderPrimarySalesPercentage()
        external
        view
        returns (uint256);

    // @dev Percentage of primary sales allocated to the platform provider
    function platformProviderPrimarySalesPercentage()
        external
        view
        returns (uint256);

    // @dev The render provider secondary sales royalties payment address
    function renderProviderSecondarySalesAddress()
        external
        view
        returns (address payable);

    // @dev The platform provider secondary sales royalties payment address
    function platformProviderSecondarySalesAddress()
        external
        view
        returns (address payable);

    // @dev Basis points of secondary sales allocated to the render provider
    function renderProviderSecondarySalesBPS() external view returns (uint256);

    // @dev Basis points of secondary sales allocated to the platform provider
    function platformProviderSecondarySalesBPS()
        external
        view
        returns (uint256);
}

// SPDX-License-Identifier: LGPL-3.0-only
// Created By: Art Blocks Inc.

pragma solidity ^0.8.0;

import "./IAdminACLV0.sol";
import "./IGenArt721CoreContractV3_Base.sol";

/**
 * @title This interface extends IGenArt721CoreContractV3_Base with functions
 * that are part of the Art Blocks Flagship core contract.
 * @author Art Blocks Inc.
 */
// This interface extends IGenArt721CoreContractV3_Base with functions that are
// in part of the Art Blocks Flagship core contract.
interface IGenArt721CoreContractV3 is IGenArt721CoreContractV3_Base {
    // @dev new function in V3
    function getPrimaryRevenueSplits(
        uint256 _projectId,
        uint256 _price
    )
        external
        view
        returns (
            uint256 artblocksRevenue_,
            address payable artblocksAddress_,
            uint256 artistRevenue_,
            address payable artistAddress_,
            uint256 additionalPayeePrimaryRevenue_,
            address payable additionalPayeePrimaryAddress_
        );

    // @dev Art Blocks primary sales payment address
    function artblocksPrimarySalesAddress()
        external
        view
        returns (address payable);

    /**
     * @notice Backwards-compatible (pre-V3) function returning Art Blocks
     * primary sales payment address (now called artblocksPrimarySalesAddress).
     */
    function artblocksAddress() external view returns (address payable);

    // @dev Percentage of primary sales allocated to Art Blocks
    function artblocksPrimarySalesPercentage() external view returns (uint256);

    /**
     * @notice Backwards-compatible (pre-V3) function returning Art Blocks
     * primary sales percentage (now called artblocksPrimarySalesPercentage).
     */
    function artblocksPercentage() external view returns (uint256);

    // @dev Art Blocks secondary sales royalties payment address
    function artblocksSecondarySalesAddress()
        external
        view
        returns (address payable);

    // @dev Basis points of secondary sales allocated to Art Blocks
    function artblocksSecondarySalesBPS() external view returns (uint256);

    /**
     * @notice Backwards-compatible (pre-V3) function  that gets artist +
     * artist's additional payee royalty data for token ID `_tokenId`.
     * WARNING: Does not include Art Blocks portion of royalties.
     */
    function getRoyaltyData(
        uint256 _tokenId
    )
        external
        view
        returns (
            address artistAddress,
            address additionalPayee,
            uint256 additionalPayeePercentage,
            uint256 royaltyFeeByID
        );
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/// @dev Royalty Registry interface, used to support the Royalty Registry.
/// @dev Source: https://github.com/manifoldxyz/royalty-registry-solidity/blob/main/contracts/specs/IManifold.sol

/// @author: manifold.xyz

/**
 * @dev Royalty interface for creator core classes
 */
interface IManifold {
    /**
     * @dev Get royalites of a token.  Returns list of receivers and basisPoints
     *
     *  bytes4(keccak256('getRoyalties(uint256)')) == 0xbb3bafd6
     *
     *  => 0xbb3bafd6 = 0xbb3bafd6
     */
    function getRoyalties(
        uint256 tokenId
    ) external view returns (address payable[] memory, uint256[] memory);
}

// SPDX-License-Identifier: LGPL-3.0-only
// Created By: Art Blocks Inc.

import "./IFilteredMinterV2.sol";

pragma solidity ^0.8.0;

/**
 * @title This interface defines any events or functions required for a minter
 * to conform to the MinterBase contract.
 * @dev The MinterBase contract was not implemented from the beginning of the
 * MinterSuite contract suite, therefore early versions of some minters may not
 * conform to this interface.
 * @author Art Blocks Inc.
 */
interface IMinterBaseV0 {
    // Function that returns if a minter is configured to integrate with a V3 flagship or V3 engine contract.
    // Returns true only if the minter is configured to integrate with an engine contract.
    function isEngine() external returns (bool isEngine);
}

// SPDX-License-Identifier: LGPL-3.0-only
// Created By: Art Blocks Inc.

pragma solidity ^0.8.0;

interface IMinterFilterV0 {
    /**
     * @notice Emitted when contract is deployed to notify indexing services
     * of the new contract deployment.
     */
    event Deployed();

    /**
     * @notice Approved minter `_minterAddress`.
     */
    event MinterApproved(address indexed _minterAddress, string _minterType);

    /**
     * @notice Revoked approval for minter `_minterAddress`
     */
    event MinterRevoked(address indexed _minterAddress);

    /**
     * @notice Minter `_minterAddress` of type `_minterType`
     * registered for project `_projectId`.
     */
    event ProjectMinterRegistered(
        uint256 indexed _projectId,
        address indexed _minterAddress,
        string _minterType
    );

    /**
     * @notice Any active minter removed for project `_projectId`.
     */
    event ProjectMinterRemoved(uint256 indexed _projectId);

    function genArt721CoreAddress() external returns (address);

    function setMinterForProject(uint256, address) external;

    function removeMinterForProject(uint256) external;

    function mint(
        address _to,
        uint256 _projectId,
        address sender
    ) external returns (uint256);

    function getMinterForProject(uint256) external view returns (address);

    function projectHasMinter(uint256) external view returns (bool);
}

// SPDX-License-Identifier: LGPL-3.0-only
// Created By: Art Blocks Inc.

import "../../interfaces/v0.8.x/IMinterBaseV0.sol";
import "../../interfaces/v0.8.x/IGenArt721CoreContractV3_Base.sol";
import "../../interfaces/v0.8.x/IGenArt721CoreContractV3.sol";
import "../../interfaces/v0.8.x/IGenArt721CoreContractV3_Engine.sol";

import "@openzeppelin-4.7/contracts/token/ERC20/IERC20.sol";

pragma solidity ^0.8.0;

/**
 * @title Art Blocks Minter Base Class
 * @notice A base class for Art Blocks minter contracts that provides common
 * functionality used across minter contracts.
 * This contract is not intended to be deployed directly, but rather to be
 * inherited by other minter contracts.
 * From a design perspective, this contract is intended to remain simple and
 * easy to understand. It is not intended to cause a complex inheritance tree,
 * and instead should keep minter contracts as readable as possible for
 * collectors and developers.
 * @dev Semantic versioning is used in the solidity file name, and is therefore
 * controlled by contracts importing the appropriate filename version.
 * @author Art Blocks Inc.
 */
abstract contract MinterBase is IMinterBaseV0 {
    /// state variable that tracks whether this contract's associated core
    /// contract is an Engine contract, where Engine contracts have an
    /// additional revenue split for the platform provider
    bool public immutable isEngine;

    // @dev we do not track an initialization state, as the only state variable
    // is immutable, which the compiler enforces to be assigned during
    // construction.

    /**
     * @notice Initializes contract to ensure state variable `isEngine` is set
     * appropriately based on the minter's associated core contract address.
     * @param genArt721Address Art Blocks core contract address for
     * which this contract will be a minter.
     */
    constructor(address genArt721Address) {
        // set state variable isEngine
        isEngine = _getV3CoreIsEngine(genArt721Address);
    }

    /**
     * @notice splits ETH funds between sender (if refund), providers,
     * artist, and artist's additional payee for a token purchased on
     * project `_projectId`.
     * WARNING: This function uses msg.value and msg.sender to determine
     * refund amounts, and therefore may not be applicable to all use cases
     * (e.g. do not use with Dutch Auctions with on-chain settlement).
     * @dev possible DoS during splits is acknowledged, and mitigated by
     * business practices, including end-to-end testing on mainnet, and
     * admin-accepted artist payment addresses.
     * @param projectId Project ID for which funds shall be split.
     * @param pricePerTokenInWei Current price of token, in Wei.
     */
    function splitFundsETH(
        uint256 projectId,
        uint256 pricePerTokenInWei,
        address genArt721CoreAddress
    ) internal {
        if (msg.value > 0) {
            bool success_;
            // send refund to sender
            uint256 refund = msg.value - pricePerTokenInWei;
            if (refund > 0) {
                (success_, ) = msg.sender.call{value: refund}("");
                require(success_, "Refund failed");
            }
            // split revenues
            splitRevenuesETH(
                projectId,
                pricePerTokenInWei,
                genArt721CoreAddress
            );
        }
    }

    /**
     * @notice splits ETH revenues between providers, artist, and artist's
     * additional payee for revenue generated by project `_projectId`.
     * @dev possible DoS during splits is acknowledged, and mitigated by
     * business practices, including end-to-end testing on mainnet, and
     * admin-accepted artist payment addresses.
     * @param projectId Project ID for which funds shall be split.
     * @param valueInWei Value to be split, in Wei.
     */
    function splitRevenuesETH(
        uint256 projectId,
        uint256 valueInWei,
        address genArtCoreContract
    ) internal {
        if (valueInWei <= 0) {
            return; // return early
        }
        bool success;
        // split funds between platforms, artist, and artist's
        // additional payee
        uint256 renderProviderRevenue_;
        address payable renderProviderAddress_;
        uint256 artistRevenue_;
        address payable artistAddress_;
        uint256 additionalPayeePrimaryRevenue_;
        address payable additionalPayeePrimaryAddress_;
        if (isEngine) {
            // get engine splits
            uint256 platformProviderRevenue_;
            address payable platformProviderAddress_;
            (
                renderProviderRevenue_,
                renderProviderAddress_,
                platformProviderRevenue_,
                platformProviderAddress_,
                artistRevenue_,
                artistAddress_,
                additionalPayeePrimaryRevenue_,
                additionalPayeePrimaryAddress_
            ) = IGenArt721CoreContractV3_Engine(genArtCoreContract)
                .getPrimaryRevenueSplits(projectId, valueInWei);
            // Platform Provider payment (only possible if engine)
            if (platformProviderRevenue_ > 0) {
                (success, ) = platformProviderAddress_.call{
                    value: platformProviderRevenue_
                }("");
                require(success, "Platform Provider payment failed");
            }
        } else {
            // get flagship splits
            (
                renderProviderRevenue_, // artblocks revenue
                renderProviderAddress_, // artblocks address
                artistRevenue_,
                artistAddress_,
                additionalPayeePrimaryRevenue_,
                additionalPayeePrimaryAddress_
            ) = IGenArt721CoreContractV3(genArtCoreContract)
                .getPrimaryRevenueSplits(projectId, valueInWei);
        }
        // Render Provider / Art Blocks payment
        if (renderProviderRevenue_ > 0) {
            (success, ) = renderProviderAddress_.call{
                value: renderProviderRevenue_
            }("");
            require(success, "Render Provider payment failed");
        }
        // artist payment
        if (artistRevenue_ > 0) {
            (success, ) = artistAddress_.call{value: artistRevenue_}("");
            require(success, "Artist payment failed");
        }
        // additional payee payment
        if (additionalPayeePrimaryRevenue_ > 0) {
            (success, ) = additionalPayeePrimaryAddress_.call{
                value: additionalPayeePrimaryRevenue_
            }("");
            require(success, "Additional Payee payment failed");
        }
    }

    /**
     * @notice splits ERC-20 funds between providers, artist, and artist's
     * additional payee, for a token purchased on project `_projectId`.
     * @dev possible DoS during splits is acknowledged, and mitigated by
     * business practices, including end-to-end testing on mainnet, and
     * admin-accepted artist payment addresses.
     */
    function splitFundsERC20(
        uint256 projectId,
        uint256 pricePerTokenInWei,
        address currencyAddress,
        address genArtCoreContract
    ) internal {
        IERC20 _projectCurrency = IERC20(currencyAddress);
        // split remaining funds between foundation, artist, and artist's
        // additional payee
        uint256 renderProviderRevenue_;
        address payable renderProviderAddress_;
        uint256 artistRevenue_;
        address payable artistAddress_;
        uint256 additionalPayeePrimaryRevenue_;
        address payable additionalPayeePrimaryAddress_;
        if (isEngine) {
            // get engine splits
            uint256 platformProviderRevenue_;
            address payable platformProviderAddress_;
            (
                renderProviderRevenue_,
                renderProviderAddress_,
                platformProviderRevenue_,
                platformProviderAddress_,
                artistRevenue_,
                artistAddress_,
                additionalPayeePrimaryRevenue_,
                additionalPayeePrimaryAddress_
            ) = IGenArt721CoreContractV3_Engine(genArtCoreContract)
                .getPrimaryRevenueSplits(projectId, pricePerTokenInWei);
            // Platform Provider payment (only possible if engine)
            if (platformProviderRevenue_ > 0) {
                _projectCurrency.transferFrom(
                    msg.sender,
                    platformProviderAddress_,
                    platformProviderRevenue_
                );
            }
        } else {
            // get flagship splits
            (
                renderProviderRevenue_, // artblocks revenue
                renderProviderAddress_, // artblocks address
                artistRevenue_,
                artistAddress_,
                additionalPayeePrimaryRevenue_,
                additionalPayeePrimaryAddress_
            ) = IGenArt721CoreContractV3(genArtCoreContract)
                .getPrimaryRevenueSplits(projectId, pricePerTokenInWei);
        }
        // Art Blocks payment
        if (renderProviderRevenue_ > 0) {
            _projectCurrency.transferFrom(
                msg.sender,
                renderProviderAddress_,
                renderProviderRevenue_
            );
        }
        // artist payment
        if (artistRevenue_ > 0) {
            _projectCurrency.transferFrom(
                msg.sender,
                artistAddress_,
                artistRevenue_
            );
        }
        // additional payee payment
        if (additionalPayeePrimaryRevenue_ > 0) {
            _projectCurrency.transferFrom(
                msg.sender,
                additionalPayeePrimaryAddress_,
                additionalPayeePrimaryRevenue_
            );
        }
    }

    /**
     * @notice Returns whether a V3 core contract is an Art Blocks Engine
     * contract or not. Return value of false indicates that the core is a
     * flagship contract.
     * @dev this function reverts if a core contract does not return the
     * expected number of return values from getPrimaryRevenueSplits() for
     * either a flagship or engine core contract.
     * @dev this function uses the length of the return data (in bytes) to
     * determine whether the core is an engine or not.
     * @param genArt721CoreV3 The address of the deployed core contract.
     */
    function _getV3CoreIsEngine(
        address genArt721CoreV3
    ) private returns (bool) {
        // call getPrimaryRevenueSplits() on core contract
        bytes memory payload = abi.encodeWithSignature(
            "getPrimaryRevenueSplits(uint256,uint256)",
            0,
            0
        );
        (bool success, bytes memory returnData) = genArt721CoreV3.call(payload);
        require(success, "getPrimaryRevenueSplits() call failed");
        // determine whether core is engine or not, based on return data length
        uint256 returnDataLength = returnData.length;
        if (returnDataLength == 6 * 32) {
            // 6 32-byte words returned if flagship (not engine)
            // @dev 6 32-byte words are expected because the non-engine core
            // contracts return a payout address and uint256 payment value for
            // the artist, and artist's additional payee, and Art Blocks.
            // also note that per Solidity ABI encoding, the address return
            // values are padded to 32 bytes.
            return false;
        } else if (returnDataLength == 8 * 32) {
            // 8 32-byte words returned if engine
            // @dev 8 32-byte words are expected because the engine core
            // contracts return a payout address and uint256 payment value for
            // the artist, artist's additional payee, render provider
            // typically Art Blocks, and platform provider (partner).
            // also note that per Solidity ABI encoding, the address return
            // values are padded to 32 bytes.
            return true;
        } else {
            // unexpected return value length
            revert("Unexpected revenue split bytes");
        }
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 25
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_genArt721Address","type":"address"},{"internalType":"address","name":"_minterFilter","type":"address"},{"internalType":"address","name":"_delegationRegistryAddress","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"_projectId","type":"uint256"},{"indexed":false,"internalType":"bytes32","name":"_key","type":"bytes32"}],"name":"ConfigKeyRemoved","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"_projectId","type":"uint256"},{"indexed":false,"internalType":"bytes32","name":"_key","type":"bytes32"},{"indexed":false,"internalType":"uint256","name":"_value","type":"uint256"}],"name":"ConfigValueAddedToSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"_projectId","type":"uint256"},{"indexed":false,"internalType":"bytes32","name":"_key","type":"bytes32"},{"indexed":false,"internalType":"address","name":"_value","type":"address"}],"name":"ConfigValueAddedToSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"_projectId","type":"uint256"},{"indexed":false,"internalType":"bytes32","name":"_key","type":"bytes32"},{"indexed":false,"internalType":"bytes32","name":"_value","type":"bytes32"}],"name":"ConfigValueAddedToSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"_projectId","type":"uint256"},{"indexed":false,"internalType":"bytes32","name":"_key","type":"bytes32"},{"indexed":false,"internalType":"uint256","name":"_value","type":"uint256"}],"name":"ConfigValueRemovedFromSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"_projectId","type":"uint256"},{"indexed":false,"internalType":"bytes32","name":"_key","type":"bytes32"},{"indexed":false,"internalType":"address","name":"_value","type":"address"}],"name":"ConfigValueRemovedFromSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"_projectId","type":"uint256"},{"indexed":false,"internalType":"bytes32","name":"_key","type":"bytes32"},{"indexed":false,"internalType":"bytes32","name":"_value","type":"bytes32"}],"name":"ConfigValueRemovedFromSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"_projectId","type":"uint256"},{"indexed":false,"internalType":"bytes32","name":"_key","type":"bytes32"},{"indexed":false,"internalType":"bool","name":"_value","type":"bool"}],"name":"ConfigValueSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"_projectId","type":"uint256"},{"indexed":false,"internalType":"bytes32","name":"_key","type":"bytes32"},{"indexed":false,"internalType":"uint256","name":"_value","type":"uint256"}],"name":"ConfigValueSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"_projectId","type":"uint256"},{"indexed":false,"internalType":"bytes32","name":"_key","type":"bytes32"},{"indexed":false,"internalType":"address","name":"_value","type":"address"}],"name":"ConfigValueSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"_projectId","type":"uint256"},{"indexed":false,"internalType":"bytes32","name":"_key","type":"bytes32"},{"indexed":false,"internalType":"bytes32","name":"_value","type":"bytes32"}],"name":"ConfigValueSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"defaultMaxInvocationsPerAddress","type":"uint256"}],"name":"DefaultMaxInvocationsPerAddress","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"delegationRegistryAddress","type":"address"}],"name":"DelegationRegistryUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"_projectId","type":"uint256"},{"indexed":true,"internalType":"uint256","name":"_pricePerTokenInWei","type":"uint256"}],"name":"PricePerTokenInWeiUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"_projectId","type":"uint256"},{"indexed":true,"internalType":"address","name":"_currencyAddress","type":"address"},{"indexed":false,"internalType":"string","name":"_currencySymbol","type":"string"}],"name":"ProjectCurrencyInfoUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"_projectId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"_maxInvocations","type":"uint256"}],"name":"ProjectMaxInvocationsLimitUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"_projectId","type":"uint256"},{"indexed":false,"internalType":"bool","name":"_purchaseToDisabled","type":"bool"}],"name":"PurchaseToDisabledUpdated","type":"event"},{"inputs":[],"name":"DEFAULT_MAX_INVOCATIONS_PER_ADDRESS","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"delegationRegistryAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"genArt721CoreAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"}],"name":"getPriceInfo","outputs":[{"internalType":"bool","name":"isConfigured","type":"bool"},{"internalType":"uint256","name":"tokenPriceInWei","type":"uint256"},{"internalType":"string","name":"currencySymbol","type":"string"},{"internalType":"address","name":"currencyAddress","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_address","type":"address"}],"name":"hashAddress","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"isEngine","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"uint256","name":"_maxInvocations","type":"uint256"}],"name":"manuallyLimitProjectMaxInvocations","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"minterFilterAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"minterType","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"minterVersion","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32[]","name":"_proof","type":"bytes32[]"},{"internalType":"address","name":"_address","type":"address"}],"name":"processProofForAddress","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"pure","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"projectConfig","outputs":[{"internalType":"bool","name":"maxHasBeenInvoked","type":"bool"},{"internalType":"bool","name":"priceIsConfigured","type":"bool"},{"internalType":"bool","name":"useMaxInvocationsPerAddressOverride","type":"bool"},{"internalType":"uint24","name":"maxInvocationsPerAddressOverride","type":"uint24"},{"internalType":"uint24","name":"maxInvocations","type":"uint24"},{"internalType":"uint256","name":"pricePerTokenInWei","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"}],"name":"projectMaxHasBeenInvoked","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"}],"name":"projectMaxInvocations","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"}],"name":"projectMaxInvocationsPerAddress","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"projectMerkleRoot","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"address","name":"_address","type":"address"}],"name":"projectRemainingInvocationsForAddress","outputs":[{"internalType":"bool","name":"projectLimitsMintInvocationsPerAddress","type":"bool"},{"internalType":"uint256","name":"mintInvocationsRemaining","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"address","name":"","type":"address"}],"name":"projectUserMintInvocations","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"bytes32[]","name":"_proof","type":"bytes32[]"}],"name":"purchase","outputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"purchase","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"bytes32[]","name":"_proof","type":"bytes32[]"}],"name":"purchaseTo","outputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"uint256","name":"","type":"uint256"}],"name":"purchaseTo","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"bytes32[]","name":"_proof","type":"bytes32[]"},{"internalType":"address","name":"_vault","type":"address"}],"name":"purchaseTo","outputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"bytes32[]","name":"_proof","type":"bytes32[]"},{"internalType":"address","name":"_vault","type":"address"}],"name":"purchaseTo_kem","outputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"bytes32[]","name":"_proof","type":"bytes32[]"}],"name":"purchase_gD5","outputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"uint24","name":"_maxInvocationsPerAddress","type":"uint24"}],"name":"setProjectInvocationsPerAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"}],"name":"setProjectMaxInvocations","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"}],"name":"togglePurchaseToDisabled","outputs":[],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"bytes32","name":"_root","type":"bytes32"}],"name":"updateMerkleRoot","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"uint256","name":"_pricePerTokenInWei","type":"uint256"}],"name":"updatePricePerTokenInWei","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_projectId","type":"uint256"},{"internalType":"bytes32[]","name":"_proof","type":"bytes32[]"},{"internalType":"address","name":"_address","type":"address"}],"name":"verifyAddress","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"}]

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